Mechanical Engineering Jobs - Capital Governorate (Kuwait) Kuwait

<p>Urgent Hiring | Lead Procurement & Contract Engineer | Wafra Joint Operations (WJO), Kuwait Engineers India Limited (EIL) is hiring experienced Lead Procurement & Contract Engineer to join the Wafra Joint Operations (WJO) project in Kuwait. If you meet the above requirements and are interested in this opportunity, please share your updated CV. Only shortlisted candidates who meet the above criteria will be contacted. Veena Venugopal Manas Choudhary #HiringNow #KuwaitJobs #ProjectEngineer #Procurement #MechanicalEngineer #EngineeringJobs #Contract Engineer #OilAndGasJobs #EPC #ProjectManagement #MiddleEastJobs #CareerOpportunities #NowHiring #EngineersIndiaLimited #EIL</p><p>• Bachelor's Degree in Engineering. • Total Experience: Minimum 15 years. • Oil & Gas Experience: Minimum 10 years. • Relevant Designation Experience: Minimum 5 years as a Lead Procurement & Contract Engineer or in a similar role. • Strong experience in procurement, contract management, tendering, vendor management, and contract administration within Oil & Gas projects.</p>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship. USAF equivalent position is Aircraft Mechanic Apprentice. Essential Responsibilities: Performs all daily launch/recovery duties in support of operational requirements. Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems. Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion. Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools. Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs. Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft. Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks. May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Must be able to work with little-to-no supervision. Performs all other duties as assigned as requested.</p><p><strong>Desired Candidate Profile</strong></p><p>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum. Minimum of one year of actual Aircraft Mechanic maintenance experience required. Must have basic knowledge of basic and complex mechanical maintenance and repair. Must possess basic knowledge of technical publications related to aircraft mechanical maintenance. Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems. Must be able to inspect and operate ground support and auxiliary equipment. Must achieve a passing grade in all required courses/certifications for continued employment, as needed. Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment. Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods. Must be able to speak, read, write, and understand English. Must submit updated SF-86 within 30 days of hire start date. Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance. Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment. Must have current/active State Issued Driver s License. Must be able to acquire and maintain a valid flight-line Government Driver s License. Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages. Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</p> <p>Associate degree in a relevant career field. Licensed by the FAA as an Airframe and Powerplant Mechanic. RPA Deployment Experience. Prior Experience as a Defense Contractor. Aircraft Mechanic Experience within the last 10 years. MQ-9 Experience as an Aircraft Mechanic. MQ-9 Aircraft Composite Repair / Replacement Experience.</p>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.USAF equivalent position is Aircraft Mechanic Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Performs all daily launch/recovery duties in support of operational requirements.</li><li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li><li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li><li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li><li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li><li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li><li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li><li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li><li>Must be able to work with little-to-no supervision.</li><li>Performs all other duties as assigned as requested.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Mechanic maintenance experience required.</li><li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li><li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li><li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications</p><ul><li>Associate degree in a relevant career field.</li><li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Aircraft Mechanic Experience within the last 10 years.</li><li>MQ-9 Experience as an Aircraft Mechanic.</li><li>MQ-9 Aircraft Composite Repair / Replacement Experience.</li></ul>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential Responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneumatic/hydraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, including pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Position : Service Advisor -Bodyshop To act as the primary customer interface for receiving customers coming to the branch for service. To diagnose or interpret their concerns for vehicle service and ensure that vehicle service is performed as per company's quality standards.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's Degree or College Diploma Mechanical Engineering or anything related to Automobile Mechanic.</li><li>Minimum 3-4 years of experience within Similar role in Automotive sector.</li><li>Good communication and organizational skills</li><li>Ability to work under pressure</li><li>Problem solving skills</li><li>Strong customer handling skills</li><li>Knowledge of computer literacy and Bodyshop Operating procedures.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Urgent Hiring | IT Data &amp; AI Specialist | NeoSOFT</p><p>Mascot, Kuwait | Up to 1.80 Lakh/Month | 3+ Years | Data Analyst, Data Engineer, GenAI, AWS/Azure/GCP, Python &amp; SQL.</p></div></section>

<p>Role &amp; Responsibilities We are seeking experienced Service Engineers, Senior Service Technicians, and Service Technicians for a leading Industrial Service Company in Kuwait specializing in compressed air systems. The candidate should have hands-on experience in maintenance, troubleshooting, overhaul, installation, commissioning, and repair of oil-injected rotary screw air compressors and compressed air dryers.</p><p>Compressor Brands Experience (Any One or More)</p><ul><li>Atlas Copco</li><li>Ingersoll Rand</li><li>Gardner Denver</li><li>Kaeser</li><li>Sullair</li><li>CompAir</li><li>ELGi</li><li>Chicago Pneumatic</li><li>Quincy</li><li>BOGE</li><li>Other internationally recognized industrial compressor brands</li></ul><p>Key Responsibilities</p><ul><li>Preventive and corrective maintenance of rotary screw air compressors.</li><li>Troubleshooting mechanical and electrical faults.</li><li>Major overhaul of compressor packages.</li><li>Airend inspection, repair, and replacement.</li><li>Bearing replacement and mechanical seal replacement.</li><li>Motor replacement and alignment.</li><li>Coupling alignment using dial indicators or laser alignment tools.</li><li>Maintenance of belt-drive and direct-drive compressor systems.</li><li>Oil system and cooling system servicing.</li><li>Replacement of oil separators, oil filters, and air filters.</li><li>Inlet valve, blowdown valve, minimum pressure valve, and thermostatic valve overhaul.</li><li>Solenoid valve troubleshooting and replacement.</li><li>Leak detection and repair.</li><li>Installation and commissioning of compressors after overhaul.</li><li>Performance testing and fault diagnosis.</li><li>Preparation of service reports and customer support documentation.</li></ul><p>Electrical Responsibilities</p><ul><li>Troubleshooting industrial electric motors.</li><li>Working knowledge of Star-Delta starters.</li><li>Experience with Soft Starters.</li><li>Experience with VFD/VSD drives.</li><li>Electrical control panel troubleshooting.</li><li>PLC and electronic compressor controller diagnostics.</li><li>Pressure and temperature sensor troubleshooting.</li><li>Reading and understanding electrical wiring diagrams.</li><li>Electrical fault diagnosis using multimeters and clamp meters.</li></ul><p>Air Dryer Experience</p><ul><li>Refrigerated Air Dryers.</li><li>Heatless Desiccant Dryers.</li><li>Heated Desiccant Dryers.</li><li>Automatic Condensate Drain Systems.</li><li>Air Filtration Systems.</li><li>Moisture Separators.</li><li>Dew Point Controllers.</li></ul><p>Tools Knowledge</p><p>Candidates should be familiar with :</p><ul><li>Dial Indicators</li><li>Laser Alignment Tools</li><li>Torque Wrenches</li><li>Bearing Pullers</li><li>Hydraulic Presses</li><li>Multimeters</li><li>Clamp Meters</li><li>Megger (Insulation Resistance Tester)</li><li>Pressure Gauges</li><li>Infrared Temperature Guns</li><li>Vibration Meters</li></ul><p>Other Requirements</p><ul><li>Good communication skills in English.</li><li>Ability to work independently at customer sites.</li><li>Strong troubleshooting skills.</li><li>Safety-conscious and team-oriented attitude.</li><li>Valid Passport preferred.</li><li>Ready to relocate to Kuwait.</li></ul><p><strong>Desired Candidate Profile</strong></p><h3>Preferred Candidate Profile</h3><p>Qualification</p><ul><li>ITI Mechanical / Electrical</li><li>Diploma in Mechanical Engineering</li><li>Diploma in Electrical Engineering</li><li>Equivalent Technical Qualification</li></ul><p>Experience</p><ul><li>3 to 15 years of relevant experience in industrial air compressor service and maintenance.</li><li>Hands-on field service experience is mandatory.</li><li>Experience in shutdowns, commissioning, and troubleshooting preferred.</li><li>Gulf experience will be an added advantage.</li></ul>

<p>Familiar with and knowledgeable in Permit to Work (PTW) systems applicable to Oil &amp; Gas operations. Responsible for overseeing and executing all field instrumentation activities (Fire Alarm, Gas Detection, and Fire Suppression Systems and Load shifting), including installation, testing, pre-commissioning, and commissioning during the construction phase. Verify that all activities are carried out in compliance with IFC drawings, approved method statements, and Inspection Test Plans (ITPs). Supervise instrumentation works such as cable pulling, cable termination, tubing installation, junction box installation, and panel wiring activities. Coordinate and assign daily work activities to subcontractors and submit daily progress reports to the Engineer. Ensure the safe installation, testing, and commissioning of instrumentation and control systems, including field devices, control panels, junction boxes, and cabling, in accordance with approved drawings and project specifications. Ensure proper segregation and routing of signal, control, and power cables during installation. Witness and support functional testing, loop checking, and pre-commissioning activities in coordination with QA/QC and commissioning teams. Assist in the preparation, tracking, and closure of punch list items arising from inspections, pre-commissioning, and commissioning activities. Maintain red-line mark-up drawings and support the design team during as-built documentation, loop folders, and handover dossiers. Coordinate closely with electrical, mechanical, and process disciplines to ensure smooth execution of multidisciplinary activities. Work in collaboration with the commissioning team to plan and execute system energization and loop testing activities. Ability to Supervise the load shifting of DCS, ESD. Liaise with client representatives to facilitate inspections, obtain approvals, and provide progress updates.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ol><li><p>Perform preventive and corrective maintenance on&nbsp;DX units&nbsp;(package units, split ACs, rooftop units, etc.).</p></li><li><p>Diagnose and resolve&nbsp;mechanical faults&nbsp;(compressors, fans, belts, bearings, refrigerant leaks).</p></li><li><p>Diagnose and resolve&nbsp;control system faults&nbsp;(thermostats, pressure switches, contactors, relays, control wiring, PCBs).</p></li><li><p>Read and interpret wiring diagrams and technical manuals.</p></li><li><p>Carry out refrigerant recovery, evacuation, recharging, and brazing per safety standards.</p></li><li><p>Use multimeters, clamp meters, pressure gauges, and recovery machines.</p></li><li><p>Coordinate with service supervisor for breakdowns and maintenance schedules.</p></li><li><p>Maintain service logs and report recurring issues.</p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ol><li><p>3-5 Experience in the same field.</p></li><li><p>Good Communication Skills with client and team. Able to speak basic Arabic.</p></li><li><p>Valid Kuwait Transferrable Visa and Kuwait Driving License.</p></li><li><p>Able to join immediately and can work on flexible timings.</p></li><li><p>Can solve&nbsp;any type of troubleshooting&nbsp;– mechanical or control.</p></li><li><p>Ability to work independently in the field.</p></li><li><p>Attention to safety (electrical and refrigerant handling)</p></li><li><p>Strong analytical and problem-solving mindset</p></li></ol><p></p></section>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> <li>Highly desired to have a U.S. passport valid for an additional two years with at least two facing pairs (four total) of blank visa pages.</li> </ul> <h4>Compensation details</h4> <p>34.17</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Design / Technical Engineer is responsible for assisting the PSD team to deliver safe, efficient, and reliable product and service delivery for our customers. The Design / Technical Engineer develops and delivers optimized technical job designs for the area of responsibility. This person identifies opportunities for continuous improvement of service delivery and formally communicate findings, and supports the Product Line in risk management and apply lessons learned to improve job design. The Design / Technical Engineer provides real-time support to PSD operations as required, and is responsible for the COSD (i.e. resource consumption). Develop technical job designs as required for the Product Line. Identify areas where new and cost-effective techniques can be applied. Explore opportunities for value-added products and services. Provide technical support throughout the service delivery process. Understand and communicate value of technology and interpretations. Consult with relevant subject matter experts as required to optimize the technical design. Support the OU PSD and/or PSD Manager in the execution phase with design changes as required due to changes in job dimensions, resource availability, service quality incidents, etc. Assist in incident response, recovery, and incident investigation. Support multiple Product Line operations in a collaborative optimized job design. Assist sales and commercial team in evaluating technical viability and tenders. Analyze job execution vs. design and formally capture design improvements and optimization opportunities (lessons learned and best practices).</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>10+</p><p></p></section>

<p>Design and Estimate the value of project being tendered as part of the team. Work experience as Design Engineer in MNC Companies like SAIPEM, PETROFAC, TECHNIP, L&amp;T, MCDERMOTT, WOOD, WORLEY, FLUOR etc., would be preferred.</p><p>Role: Tender Manager</p><p><strong>Desired Candidate Profile</strong></p><p>Work experience as Design Engineer in MNC Companies like SAIPEM, PETROFAC, TECHNIP, L&amp;T, MCDERMOTT, WOOD, WORLEY, FLUOR etc., would be preferred.</p>

<p>Company Description Kuwait Shop Factory is a specialized manufacturer of high-quality cosmetics and personal care products for skin, body, and hair. Inspired by traditional herbal remedies and enriched with natural oils, our formulations combine heritage with modern science to deliver safe, effective, and luxurious care solutions.</p><p>Chemist or chemical engineer needed for cosmetic production factory in Kuwait.</p><p>Production chemist/ Chemical engineer.</p><p>Must have experience in the field of cosmetics and personal care products.</p><p>Good in English and computer skills.</p><p>Good knowledge of water desalination system.</p><p>Bachelor's degree in Chemistry, Chemical Engineering, or related discipline.</p><p>Attention to detail, problem-solving abilities, and effective communication skills.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Chemistry, Chemical Engineering, or related discipline</li><li>Attention to detail, problem-solving abilities, and effective communication skills</li><li>NOTE: PREFERRED INDIAN CANDIDATES FROM INDIA TO WORK IN KUWAIT</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing calibration procedures and required functional tests in support of the KAF 4790 manual series.</p><p>The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities include maintenance and serviceability procedures for subsystem components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of airframes and power plants engineering principles, techniques, and methods in the maintainability of existing equipment and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</p><p>Apply and provide a thorough working knowledge of airframes and power plant systems to include aircraft modification procedures and experience with specific airframe, hydraulic, engine, and propeller systems, systems integration, system/component failure analysis, inspection, repair, and testing of airframes and power plant systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. Performance abilities include performance of maintenance and servicing related aircraft components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation and incorporates applicable technical directives and bulletins. Troubleshoots and/or repairs malfunctions in the aircraft airframes and power plants systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J MRC/MIMs, to include performing calibration procedures and required functional tests. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. Performs applicable O and I level maintenance functions in support of In-Flight Refueling Systems and rebuild shop and Aircraft Tire &amp; Wheel rebuilding. Perform scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment, pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated airframes and power plants equipment systems. Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/ Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures When necessary, perform other duties and supervisory functions, critical to the function of the program and to assure compliance with the Performance Work Statement (PWS).</p><p>Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems.</p><p>Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required.</p><p>The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arm</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>EDUCATION and/or EXPERIENCE: Graduation from a standard four (4) year high school or equivalent (GED)</p><p></p></section>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Supports an aircraft ground equipment (AGE) shop in a medium to large-sized military aircraft flying organization. Ensures the timely and proper performance of scheduled and unscheduled maintenance on AGE equipment and light support vehicles. Inspects, tests, and operates AGE to determine equipment serviceability and proper operation. Diagnoses mechanical and electrical circuitry malfunctions. Interprets drawings, wiring diagrams, schematics, and technical data to facilitate repairs and/or modifications to ground support equipment.</p> <p>Identifies appropriate replacement parts in TOs and technical documents and orders those parts. Removes, disassembles, repairs, cleans, treats for corrosion, assembles, and re-installs AGE accessories and components. Stencils and marks AGE as appropriate. Services equipment with fuel, oil, coolant, water, hydraulic fluid, and air as required. Operates, cleans, inspects, and services AGE tow vehicles. Maintains and documents AGE equipment and tow vehicle forms. Positions equipment to support aircraft maintenance and flying operations. Schedules PMIs as required. Adheres to safety procedures and follows technical orders as applicable.</p> <p>USAF equivalent position is AGE Mechanic Apprentice.</p> <h4>Essential responsibilities</h4> <ul> <li>Maintains external fuel and grounding systems; performs scheduled and unscheduled maintenance on GSE; inspects, tests, and operates GSE to determine equipment serviceability and proper operation; services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air; diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical publications.</li> <li>Disassembles and assembles malfunctioning basic GSE accessories and components; removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories; stencils and marks GSE in accordance with technical publications; stores, handles, labels, uses, and disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations.</li> <li>Prepares GSE for storage and mobility deployment; and operates, cleans, inspects, and services GSE towing vehicles.</li> <li>Assists in maintaining vehicle records and assists with updating paper and electronic equipment records; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations; practices good housekeeping, tool control, foreign object damage prevention, and safety at all times.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one-year actual AGE maintenance experience required.</li> <li>Must be qualified with most basic types and uses of AGE equipment.</li> <li>Must be familiar with diesel engine maintenance and repair, and HVAC maintenance and repair at the basic level.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect, repair, and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Vehicle operator training.</li> <li>AGE mechanic experience within the last 10 years.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Conduct the training and examination on all NDT methods to certify and to re-certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.</p> <p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p> <p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p> <p>Establish radiation areas for radiographic operations.</p> <p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p> <p>Perform nondestructive inspection on structures, components, and systems.</p> <p>Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p> <p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p> <p>Operate, maintain, and inspect nondestructive equipment.</p> <p>Perform operator maintenance and service inspections on shop equipment and tools.</p> <p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p> <p>Perform silver recovery functions.</p> <p>Handle and dispose of hazardous waste and materials.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum requirements</h4> <p>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</p> <p>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</p> <p>Three (3) years’ experience as a Non Destructive Inspection (NDI).</p> <p>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/DIDC Training).</p> <h4>Security clearance requirements</h4> <p>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a clearance and for facility credentials/authorization to work at this facility.</p> <h4>Additional and preferred qualifications</h4> <ul> <li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li> <li>Capable of assuming technical responsibility for the NDT facility and staff.</li> <li>Capable of selecting the method and technique for a specific inspection.</li> <li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li> <li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li> <li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis. Conduct the training and examination on all NDT methods to certify and to re- certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189. Determine test method and prepare fluids and parts for nondestructive inspection. Interpret nondestructive inspection test results and provide information about defects to repair center. Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action. Establish radiation areas for radiographic operations. Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data. Perform nondestructive inspection on structures, components, and systems. Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment. Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors. Operate, maintain, and inspect nondestructive equipment. Perform operator maintenance and service inspections on shop equipment and tools. Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment. Perform silver recovery functions. Handle and dispose of hazardous waste and materials Perform other qualified duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li><li>Three (3) years experience as a Non Destructive Inspection (NDI).</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li><li>Capable of assuming technical responsibility for the NDT facility and staff.</li><li>Capable of selecting the method and technique for a specific inspection.</li><li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li><li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li><li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p><p>• Conduct the training and examination on all NDT methods to certify and to re- certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p><p>• Determine test method and prepare fluids and parts for nondestructive inspection.</p><p>• Interpret nondestructive inspection test results and provide information about defects to repair center.</p><p>• Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p><p>• Establish radiation areas for radiographic operations.</p><p>• Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p><p>• Perform nondestructive inspection on structures, components, and systems.</p><p>• Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p><p>• Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p><p>• Operate, maintain, and inspect nondestructive equipment.</p><p>• Perform operator maintenance and service inspections on shop equipment and tools.</p><p>• Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p><p>• Perform silver recovery functions.</p><p>• Handle and dispose of hazardous waste and materials</p><p>• Perform other qualified duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li><li>Three (3) years experience as a Non Destructive Inspection (NDI).</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li><li>Capable of assuming technical responsibility for the NDT facility and staff.</li><li>Capable of selecting the method and technique for a specific inspection.</li><li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li><li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li><li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul><p></p></section>

<p>We are hiring for a leading Information Technology and Digital Transformation company in Kuwait and are looking for an experienced Senior Implementation Engineer – Storage Solutions to join their team. Key Responsibilities: - Design, implement, configure, and support enterprise Dell Storage Solutions. - Manage Dell PowerStore, PowerMax, Unity, PowerScale, and ECS. - Perform storage provisioning, zoning, mapping, masking, LUN management, and migrations. - Implement and support SAN/NAS, DR, HA, replication, and Business Continuity solutions. - Integrate storage with VMware, Hyper-V, Windows/Linux servers, and backup solutions. - Configure and troubleshoot Fibre Channel SAN environments, including Brocade and Cisco switches. - Support NFS, SMB/CIFS, and FTP protocols. - Perform performance monitoring, troubleshooting, optimization, firmware upgrades, and lifecycle management. - Prepare HLD/LLD, SOPs, migration plans, as-built, and handover documentation. - Provide L2/L3 support and coordinate with customers, vendors, PMs, and technical teams</p><p>Key Requirements: - 6–8+ years of experience in enterprise storage implementation and administration. - 4+ years of strong hands-on experience with Dell EMC/Dell Technologies Storage. - Expertise in Dell PowerStore, PowerMax, Unity XT, PowerScale (Isilon), and ECS/Object Storage. - Strong experience in SAN/NAS architecture, storage migration, replication, DR, HA, and performance optimization. - Hands-on experience with Fibre Channel SAN, Brocade and Cisco MDS switches, zoning and fabric management. - Experience with VMware vSphere/vCenter, Microsoft Hyper-V, Windows and Linux. - Knowledge of NFS, SMB/CIFS, PowerPath/MPIO, and backup solutions. - Strong troubleshooting, RCA, capacity planning, and storage performance tuning skills. - Experience preparing HLD/LLD, SOPs, migration plans, as-built, and handover documentation. - Bachelor’s degree in Computer Science, IT, Engineering, or a related field. Certifications – Preferred - Dell Proven Professional – Storage Deployment Engineer - Dell PowerStore Implementation - Dell PowerMax Implementation - Dell Unity XT Implementation - Dell PowerScale (Isilon) - Dell ECS/Object Storage</p>

<p>We are looking for an experienced Planning Engineer to join the NBTC Kuwait Operations Equipment Division.</p><p><br></p><p>Role: Other</p><p>Industry Type: Engineering &amp; Construction</p><p>Department: Other</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Other</p><p>Education</p><p>UG: B.Tech / B.E. in Any Specialization</p>