Planning Engineer Jobs in Kuwait

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>The Rig Liaisonman acts as the primary link between the drilling rig site, the Drilling &amp; Technical Department (DTD), Saudi Aramco representatives, and the contractor.<br> The position is responsible for coordinating rig activities, monitoring operational performance, ensuring compliance with approved drilling programs and Saudi Aramco requirements, and facilitating timely communication and resolution of operational issues.<br> Key Responsibilities Serve as the main liaison between the rig site, DTD, Saudi Aramco representatives, and drilling contractors.<br> Coordinate daily drilling and rig-related activities with relevant departments and stakeholders.<br> Monitor rig operations to ensure compliance with approved drilling programs, procedures, safety standards, and client requirements.<br> Review and communicate daily drilling reports, operational updates, equipment status, and performance information.<br> Follow up on rig activities, operational challenges, equipment issues, and required corrective actions.<br> Coordinate with drilling engineers, rig management, wellsite supervisors, service companies, and other stakeholders.<br> Escalate operational, technical, safety, and schedule-related issues to the appropriate DTD personnel.<br> Assist in ensuring that drilling operations remain aligned with the approved program and project schedule.<br> Track the status of rig moves, rig readiness, equipment availability, maintenance requirements, and operational priorities.<br> Support coordination of logistics, materials, personnel, services, and other resources required for rig operations.<br> Participate in meetings, operational reviews, coordination meetings, and incident investigations when required.<br> Maintain accurate records and provide regular updates to DTD management.<br> Bachelor’s degree or diploma in Drilling Engineering, Petroleum Engineering, Mechanical Engineering, or a related discipline ; or equivalent relevant experience.<br> Typically 8–15 years of experience in drilling and rig operations , preferably in the oil and gas industry.<br> Previous experience working with Saudi Aramco operations or Saudi Aramco-approved contractors is highly preferred.<br> Strong knowledge of land rig operations, drilling activities, wellsite coordination, and oilfield services.<br> Experience liaising with drilling contractors, service companies, client representatives, and technical departments.<br> Familiarity with Saudi Aramco safety, operational, and reporting requirements.<br></span> </div>

<p>The Non-Destruction Inspection Technician (NDI) II inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p><p>Determine test method and prepare fluids and parts for nondestructive inspection.</p><p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p><p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p><p>Establish radiation areas for radiographic operations.</p><p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p><p>Perform nondestructive inspection on structures, components, and systems.</p><p>Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrate testing, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p><p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p><p>Operate, maintain, and inspect nondestructive equipment.</p><p>Perform operator maintenance and service inspections on shop equipment and tools.</p><p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p><p>Perform silver recovery functions.</p><p>Handle and dispose of hazardous waste and materials.</p><p>Perform other qualified duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent required.</li><li>U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Completion of a initial Non Destructive Inspection Level II training Course and current basic qualification.</li><li>Three (3) or more years experience as an aviation inspector and a minimum of one year experience on the assigned(MDS) airframe . (UH60, AH64, CH47 )</li><li>Shall be trained and qualified per NAS 410 or ASNT-CP-189 to the level assigned.</li><li>Must be in possession of a U.S. Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</li><li>Must be a US Citizen.</li><li>Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust. ** US Citizenship is required to obtain a T1/CAC NACI Clearance.</li><li>Able to clear CENTCOM Medical requirements for deployment.</li><li>Ability to obtain and maintain Kuwait Visa</li><li>Previous experience in the maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components (UH60, AH64, CH47).</li><li>Have the skills and knowledge to set up and standardize equipment, conduct tests, interpret and evaluate for acceptance or rejection, and document.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and Level I personnel in the technique/method in which they are certified.</li><li>Familiar with the codes, standards, and other contractual documents that control the method as utilized by the employer.</li><li>Capable of developing written instructions from approved general procedures. Such instructions shall require final approval by a Level III.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Date Posted:</b></p><br>2026-07-09<p><b>Country: </b></p><br>Kuwait<p><b>Location: </b></p><br>KWT01: Al Tijaria Tower, 10th Floor, Al Soor Street, MirqabJob Purpose<p>The role holder supports Service Operations by coordinating field support activities, maintaining operational records, preparing reports and dashboards, supporting process governance, and ensuring timely follow-up of operational activities. The role works closely with field teams, supervisors, customers, and internal stakeholders to improve operational efficiency and service performance.</p><br>Key ResponsibilitiesCore Responsibilities<ul><li>Support field operations through coordination, follow-up, and process administration.</li><li>Maintain operational trackers, records, and documentation.</li><li>Prepare and distribute operational reports, KPI reports, dashboards, and management updates.</li><li>Support customer communication requirements, appointments, and reporting activities.</li><li>Monitor pending actions, operational KPIs, and business processes to support timely completion.</li><li>Support timesheet validation, compliance monitoring, and reporting activities.</li><li>Coordinate with supervisors, finance, sales, and field teams to support operational requirements.</li><li>Maintain data accuracy and support system updates.</li><li>Participate in process improvement, reporting enhancement, and automation initiatives.</li><li>Support regional projects related to service operations, reporting, governance, and continuous improvement.</li></ul>Self-Management<ul><li>Work with the reporting manager to establish and achieve performance objectives.</li><li>Identify development needs and participate in relevant training opportunities.</li><li>Maintain a high level of professionalism, accountability, and customer focus.</li><li>Keep abreast of business processes, technologies, and best practices.</li></ul>Minimum Qualifications, Experience and SkillsMinimum Qualification<ul><li>Diploma or Bachelor's Degree in Business Administration, Engineering, Information Systems, or related field.</li></ul>Years of Experience<ul><li>Minimum 3–5 years of experience in operations support, service coordination, reporting, administration, or related functions.</li></ul>Skills &amp; Experience<ul><li>Experience supporting service or field operations and coordinating with multiple stakeholders.</li><li>Experience in reporting, KPI tracking, dashboard preparation, and process coordination.</li><li>Strong Microsoft Excel skills; Power BI knowledge is preferred.</li><li>Strong analytical, communication, and stakeholder management skills.</li><li>Ability to manage multiple priorities and work independently in a fast-paced environment.</li><li>Experience with operational systems, digital tools, and reporting platforms is an advantage.</li></ul>Language Skills<ul><li>Fluent written and spoken English.</li><li>Arabic is an advantage..</li></ul><p>If you live in a city, chances are we will give you a lift or play a role in keeping you moving every day.&nbsp;</p><br><p>Otis is the world’s leading elevator and escalator manufacturing, installation, and service company. We move 2.4 billion people every day and maintain approximately 2.4 million customer units worldwide, the industry's largest Service portfolio.&nbsp;&nbsp;</p><br><p>You may recognize our products in some of the world’s most famous landmarks including the Eiffel Tower, Empire State Building, Burj Khalifa and the Petronas Twin Towers! We are 72,000 people strong, including engineers, digital technology experts, sales, and functional specialists, as well as factory and field technicians, all committed to meeting the diverse needs of our customers and passengers in more than 200 countries and territories worldwide. We are proud to be a diverse, global team with a proven legacy of innovation that continues to be the bedrock of a fast-moving, high-performance company.&nbsp;&nbsp;</p><br><p>When you join Otis, you become part of an innovative global industry leader with a resilient business model. You’ll belong to a diverse, trusted, and caring community where your contributions, and the skills and capabilities you’ll gain working alongside the best and brightest, keep us connected and on the cutting edge. &nbsp;</p><br><p>We provide opportunities, training, and resources, that build leadership and capabilities in Sales, Field, Engineering and Major Projects and our Employee Scholar Program is a notable point of pride, through which Otis sponsors colleagues to pursue degrees or certification programs.&nbsp;&nbsp;&nbsp;</p><br><p>Today, our focus more than ever is on people. As a global, people-powered company, we put people – passengers, customers, and colleagues – at the center of everything we do.&nbsp; We are guided by our values that we call our Three Absolutes – prioritizing Safety, Ethics, Quality in all that we do. If you would like to learn more about environmental, social and governance (ESG) at Otis click here.&nbsp;&nbsp;</p><br><p>Become a part of the Otis team and help us #Buildwhatsnext!&nbsp;</p><br><p><span><i>Otis is An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other protected class according to applicable law. To request an accommodation in completing an employment application due to a special need or a disability, please contact us at careers@otis.com.</i></span></p><br><br><br><p><b>Privacy Policy and Terms:</b></p><br><p><span>Click on this </span>link<span> to read the Policy and Terms</span></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>The Rig Liaisonman acts as the primary link between the drilling rig site, the Drilling &amp; Technical Department (DTD), Saudi Aramco representatives, and the contractor.<br> The position is responsible for coordinating rig activities, monitoring operational performance, ensuring compliance with approved drilling programs and Saudi Aramco requirements, and facilitating timely communication and resolution of operational issues.<br> Key Responsibilities Serve as the main liaison between the rig site, DTD, Saudi Aramco representatives, and drilling contractors.<br> Coordinate daily drilling and rig-related activities with relevant departments and stakeholders.<br> Monitor rig operations to ensure compliance with approved drilling programs, procedures, safety standards, and client requirements.<br> Review and communicate daily drilling reports, operational updates, equipment status, and performance information.<br> Follow up on rig activities, operational challenges, equipment issues, and required corrective actions.<br> Coordinate with drilling engineers, rig management, wellsite supervisors, service companies, and other stakeholders.<br> Escalate operational, technical, safety, and schedule-related issues to the appropriate DTD personnel.<br> Assist in ensuring that drilling operations remain aligned with the approved program and project schedule.<br> Track the status of rig moves, rig readiness, equipment availability, maintenance requirements, and operational priorities.<br> Support coordination of logistics, materials, personnel, services, and other resources required for rig operations.<br> Participate in meetings, operational reviews, coordination meetings, and incident investigations when required.<br> Maintain accurate records and provide regular updates to DTD management.<br> Bachelor’s degree or diploma in Drilling Engineering, Petroleum Engineering, Mechanical Engineering, or a related discipline ; or equivalent relevant experience.<br> Typically 8–15 years of experience in drilling and rig operations , preferably in the oil and gas industry.<br> Previous experience working with Saudi Aramco operations or Saudi Aramco-approved contractors is highly preferred.<br> Strong knowledge of land rig operations, drilling activities, wellsite coordination, and oilfield services.<br> Experience liaising with drilling contractors, service companies, client representatives, and technical departments.<br> Familiarity with Saudi Aramco safety, operational, and reporting requirements.<br></span> </div>

Inventory Management Executive<br><br> Job Id :100195269<br><br>Hire Resume Writers<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>We are looking for a candidate with strong ERP and Advanced Excel experience to manage and control inventory.<br><br>Key Requirements<br><br>Experience in Inventory Management<br><br>Strong knowledge of ERP systems<br><br>Advanced Microsoft Excel skills<br><br>Experience in stock control, inventory tracking, and reporting<br><br>Ability to monitor stock movements and maintain accurate records<br><br>Good analytical and organizational skills<br><br>Previous Inventory Experience Is Preferred<br><br>Main Role: Manage inventory, stock records, and inventory reporting using ERP and Advanced Excel.<br><br>Basic Details<br><br>Location : Shuwaikh , Kuwait<br><br>Download Interactive Maps<br><br>Qualification<br><br>Posted : 2 days ago<br><br>Job Type : Full-Time<br><br>Company : Karyan Group<br><br>Posted By: masoud herami<br><br>Contact Info<br><br>Mobile : +965 96690131<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : karyanservice@gmail.com

<p><h4>Job Description</h4> <p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Conduct the training and examination on all NDT methods to certify and to re-certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.</p> <p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p> <p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p> <p>Establish radiation areas for radiographic operations.</p> <p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p> <p>Perform nondestructive inspection on structures, components, and systems.</p> <p>Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p> <p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p> <p>Operate, maintain, and inspect nondestructive equipment.</p> <p>Perform operator maintenance and service inspections on shop equipment and tools.</p> <p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p> <p>Perform silver recovery functions.</p> <p>Handle and dispose of hazardous waste and materials.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum Requirements:</h4> <ul> <li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li> <li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li> <li>Three (3) years’ experience as a Non Destructive Inspection (NDI).</li> <li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/DIDC Training).</li> <li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li> </ul> <h4>Security Clearance Requirements:</h4> <ul> <li>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance.</li> <li>Must be able to obtain and maintain facility credentials/authorization.</li> <li>US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li> </ul> <h4>Additional and Preferred Qualifications:</h4> <ul> <li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li> <li>Capable of assuming technical responsibility for the NDT facility and staff.</li> <li>Capable of selecting the method and technique for a specific inspection.</li> <li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li> <li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li> <li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical Requirements/Working Environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Conduct the training and examination on all NDT methods to certify and to re-certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.</p> <p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p> <p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p> <p>Establish radiation areas for radiographic operations.</p> <p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p> <p>Perform nondestructive inspection on structures, components, and systems.</p> <p>Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p> <p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p> <p>Operate, maintain, and inspect nondestructive equipment.</p> <p>Perform operator maintenance and service inspections on shop equipment and tools.</p> <p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p> <p>Perform silver recovery functions.</p> <p>Handle and dispose of hazardous waste and materials.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum requirements</h4> <p>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</p> <p>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</p> <p>Three (3) years’ experience as a Non Destructive Inspection (NDI).</p> <p>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/DIDC Training).</p> <h4>Security clearance requirements</h4> <p>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a clearance and for facility credentials/authorization to work at this facility.</p> <h4>Additional and preferred qualifications</h4> <ul> <li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li> <li>Capable of assuming technical responsibility for the NDT facility and staff.</li> <li>Capable of selecting the method and technique for a specific inspection.</li> <li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li> <li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li> <li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis. Conduct the training and examination on all NDT methods to certify and to re- certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189. Determine test method and prepare fluids and parts for nondestructive inspection. Interpret nondestructive inspection test results and provide information about defects to repair center. Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action. Establish radiation areas for radiographic operations. Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data. Perform nondestructive inspection on structures, components, and systems. Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment. Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors. Operate, maintain, and inspect nondestructive equipment. Perform operator maintenance and service inspections on shop equipment and tools. Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment. Perform silver recovery functions. Handle and dispose of hazardous waste and materials Perform other qualified duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li><li>Three (3) years experience as a Non Destructive Inspection (NDI).</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li><li>Capable of assuming technical responsibility for the NDT facility and staff.</li><li>Capable of selecting the method and technique for a specific inspection.</li><li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li><li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li><li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p><p>• Conduct the training and examination on all NDT methods to certify and to re- certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p><p>• Determine test method and prepare fluids and parts for nondestructive inspection.</p><p>• Interpret nondestructive inspection test results and provide information about defects to repair center.</p><p>• Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p><p>• Establish radiation areas for radiographic operations.</p><p>• Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p><p>• Perform nondestructive inspection on structures, components, and systems.</p><p>• Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p><p>• Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p><p>• Operate, maintain, and inspect nondestructive equipment.</p><p>• Perform operator maintenance and service inspections on shop equipment and tools.</p><p>• Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p><p>• Perform silver recovery functions.</p><p>• Handle and dispose of hazardous waste and materials</p><p>• Perform other qualified duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li><li>Three (3) years experience as a Non Destructive Inspection (NDI).</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li><li>Capable of assuming technical responsibility for the NDT facility and staff.</li><li>Capable of selecting the method and technique for a specific inspection.</li><li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li><li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li><li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Rig Manager Deep Drilling We are currently looking for a Rig Manager Deep Drilling Land Rigs (3000 HP / HPHT) to join our client's operations in Kuwait. Position Overview: The Rig Manager Deep Drilling will be responsible for the safe, efficient, and cost-effective execution of drilling operations on deep drilling land rigs in Kuwait. The role will provide overall leadership for rig operations, ensuring operational excellence, equipment reliability, and compliance with company and regulatory requirements. Key Responsibilities: Rig Operations: Direct and oversee all drilling and rig operations to ensure safe and efficient execution. Ensure drilling activities are performed in accordance with approved drilling programs and operational procedures. Monitor rig performance and optimize operational efficiency while minimizing non-productive time (NPT). Coordinate daily drilling activities with Drilling Superintendents and onshore support teams. Ensure proper well control practices are maintained at all times. Operational Excellence: Drive continuous improvement initiatives to enhance drilling performance and equipment utilization. Monitor operational KPIs and implement corrective actions when required. Coordinate with maintenance teams to ensure timely repairs and preventive maintenance activities. Compliance &amp; Safety: Ensure compliance with company HSE policies, industry standards, and regulatory requirements. Promote a strong safety culture and ensure adherence to well control procedures. Lead incident investigations and implement corrective actions. Participate in audits, inspections, and emergency response activities. Leadership: Lead and supervise all rig personnel and contractors on site. Mentor and develop crew competency through training and coaching. Coordinate with Toolpushers, Drilling Engineers, service companies, and contractors. Foster effective collaboration within multicultural work environments.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's Degree or Technical Diploma in Petroleum, Mechanical Engineering, or related discipline.</li><li>Minimum 8+ years of drilling rig operations experience.</li><li>At least 3 years in a Rig Manager, Senior Toolpusher, or equivalent leadership role.</li><li>Extensive experience supporting deep drilling land rigs (3000HP, HPHT, and complex drilling operations).</li><li>Strong understanding of drilling operations, well control, and rig equipment.</li><li>Current IWCF or IADC WellSharp certification is preferred.</li><li>Excellent communication and leadership skills in English.</li><li>Candidates from Canada, United States, Europe, Eastern Europe, Australia, China are preferred.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a highly organized and experienced Senior Supply Chain Officer to oversee procurement, inventory control, warehouse coordination, and logistics operations within a manufacturing environment. The ideal candidate will have strong experience in end-to-end supply chain management, supplier relationship management, and ERP systems, ensuring efficient operations while maintaining cost-effectiveness, quality, and timely delivery.</p><p>Key Responsibilities:</p><ul><li>Manage procurement and supplier relationships</li><li>Coordinate inventory and warehouse operations</li><li>Monitor stock levels and ensure timely replenishment</li><li>Coordinate local and international shipments</li><li>Prepare supply chain reports and maintain accurate records</li><li>Ensure compliance with company policies and procedures</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Requirement open for Bilingual Arab nationals</li><li>Minimum 5-7 years of relevant experience in Manufacturing Industry preferred</li><li>Strong knowledge of procurement, inventory management, and logistics</li><li>Proficient in Microsoft Excel and ERP systems</li><li>Excellent communication and organizational skills</li><li>Ability to work under pressure and meet deadlines</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a dedicated and experienced Foreman in the Civil sector to join our dynamic team in Kuwait. This role is pivotal in overseeing construction projects, ensuring they are completed on time, within budget, and to the highest standards of quality. As a Foreman, you will play a crucial role in coordinating the efforts of various teams, managing resources, and maintaining a safe work environment. Your expertise will guide the team, fostering a culture of collaboration and excellence.</p><p>In this position, you will have the opportunity to grow your career within a supportive environment that values continuous learning and professional development. Our company is committed to investing in our employees, offering training programs and mentorship opportunities to enhance your skills and knowledge in the field. You will be part of a team that prioritizes safety, innovation, and efficiency, enabling you to make a significant impact on our projects and the community.</p><p>As you take on this leadership role, you will be responsible for implementing best practices and ensuring compliance with industry standards. Your ability to communicate effectively with team members and stakeholders will be essential in driving project success. Join us and be a part of a forward-thinking organization that recognizes and rewards hard work, paving the way for your advancement in the civil construction industry.</p><p><b>Responsibilities:</b></p><ol><li>Oversee daily operations on construction sites, ensuring adherence to project plans and specifications while maintaining safety protocols and quality standards.</li><li>Coordinate with subcontractors and suppliers to ensure timely delivery of materials and services, optimizing workflow and minimizing delays.</li><li>Conduct regular inspections of work processes and site conditions, identifying potential issues and implementing corrective actions to maintain project timelines.</li><li>Manage and mentor a team of construction workers, providing guidance and support to enhance their skills and productivity.</li><li>Prepare and maintain detailed project documentation, including progress reports, schedules, and budgets, to ensure transparency and accountability.</li><li>Collaborate with project managers and engineers to develop strategies for efficient resource allocation and risk management throughout the project lifecycle.</li><li>Facilitate effective communication between all parties involved in the project, ensuring everyone is informed of updates and changes to plans.</li><li>Implement and enforce health and safety regulations on-site, conducting safety meetings and training sessions to promote a culture of safety.</li><li>Analyze project performance and provide recommendations for improvements, leveraging lessons learned to enhance future project execution.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Strong leadership skills to effectively manage and motivate a diverse team of construction professionals.</li><li>Excellent communication skills, both verbal and written, to facilitate collaboration and convey critical information.</li><li>Proficient in project management software and tools to track progress and manage resources efficiently.</li><li>In-depth knowledge of civil construction processes and safety regulations to ensure compliance and quality.</li><li>Problem-solving abilities to address challenges and implement effective solutions on-site.</li><li>Time management skills to prioritize tasks and meet deadlines without compromising quality.</li><li>Ability to read and interpret blueprints and technical drawings, translating them into actionable plans for the team.</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Long Description <br><br>Job Summary <br><br>Job Responsibilities <br></span><p>•&nbsp;&nbsp; &nbsp;Review EH&amp;S policy &amp; arrangements, identify areas for improvement as required.<br> •&nbsp;&nbsp; &nbsp;Conduct and write risk assessments for specific tasks or processes, ensure that suitable controls are implemented, communicated to BU’s and those workers concerned .&nbsp;<br> •&nbsp;&nbsp; &nbsp;Monitor contractor compliance In line with Alghanim Facilities contractor code of conduct.<br> •&nbsp;&nbsp; &nbsp;Review and approve contractor RAMS before any work commence.&nbsp;<br> •&nbsp;&nbsp; &nbsp;Record and Investigate accidents, incidents &amp; Near misses and ensure that root cause identification, &nbsp;and that suitable controls are put in place to prevent a recurrence.&nbsp;<br> •&nbsp;&nbsp; &nbsp;Maintain records of all Accident, injury and near miss statistics, raise safety alerts.<br> •&nbsp;&nbsp; &nbsp;Attend Monthly site EH&amp;S meetings with Bu’s key stakeholders, ensure that records and an action log of these Monthly EH&amp;S &nbsp;meetings maintained.<br> •&nbsp;&nbsp; &nbsp;Attend other Safety related meetings or inspections with Ministry or regulatory bodies.<br> •&nbsp;&nbsp; &nbsp;Provide E.H&amp;S support and advice to the business units on request.<br> •&nbsp;&nbsp; &nbsp;Plan to ensure that the Monthly site EH&amp;S audit schedule is met.<br> •&nbsp;&nbsp; &nbsp;Carry our safety audits work with facilities supervisors and local management team to ensure that corrective actions are completed.&nbsp;<br> •&nbsp;&nbsp; &nbsp;Plan and execute annual fire drills&nbsp;<br> •&nbsp;&nbsp; &nbsp;Plan schedule &amp; Deliver Fire awareness and first aid training to staff.<br> •&nbsp;&nbsp; &nbsp;Identify site specific EH&amp;S training needs for staff and ensure that you provide site specific &amp; relevant staff training and Toolbox Talks for the sites you audit and support.&nbsp;<br> •&nbsp;&nbsp; &nbsp;Carry out inspections of contractor’s , work site &nbsp;and working practices , and address &amp; report any safety violations, or unsafe behaviours. &nbsp;<br> &nbsp;</p><br> <br><br>Candidate Requirements <br><p>•&nbsp;&nbsp; &nbsp;Graduate / Diploma in Safety or Engineering Discipline.<br> •&nbsp;&nbsp; &nbsp;3 + Years’ experience working in a H&amp;S safety officer or Safety supervisory role would be an advantage.<br> •&nbsp;&nbsp; &nbsp;NEBOSH general certificate&nbsp;<br> •&nbsp;&nbsp; &nbsp;Certified ISO 45001 Lead auditor,&nbsp;<br> •&nbsp;&nbsp; &nbsp;Certified trainer , desirable<br> •&nbsp;&nbsp; &nbsp;Knowledge of MS Office solutions (Excel, Word, Power point)<br> •&nbsp;&nbsp; &nbsp;English – Verbal &amp; Written (Arabic an advantage<br> •&nbsp;&nbsp; &nbsp;Knowledge of KFF , MOSA &amp; PAM regulations&nbsp;<br> •&nbsp;&nbsp; &nbsp;A flexible team worker who role models good E.H&amp;S practices&nbsp;<br> •&nbsp;&nbsp; &nbsp;Valid Driving License&nbsp;<br> &nbsp;</p><br> <br><br>Education <br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Long Description <br><br>Job Summary <br></span><p>Reporting to the Marketing Manager, the Marketing Executive is responsible for developing and implementing the marketing plan for the Automotive division of Alghanim Industries.</p><br> <br><br>Job Responsibilities <br><ul> <li>Develop and implement the marketing plan.</li> <li>Plan and oversee the development and execution of all marketing communication initiatives and advertising activities.</li> <li>Develop sales promotion and merchandising strategies to ensure maximum market penetration.</li> <li>Develop and implement systems to monitor competitive market position in relation to own product lines, including pricing, product features and sales strategy.</li> <li>Analyse sales results and provide recommendations.</li> <li>Participate in setting the sales and pricing strategy.</li> <li>Is responsible for showroom display and merchandising.</li> <li>Plan and conduct market research.</li> </ul> <br><br>Candidate Requirements <br><ul> <li>3-4 years in Automotive Marketing Experience, preferably with a multinational company</li> <li>Excellent communication and presentation skills.</li> <li>Proven analytical and organizational skills.</li> <li>Self motivated with strong leadership and team player skills.</li> <li>Ability to work in a fast-paced and demanding environment.</li> <li>Bilingual (English/Arabic).</li> </ul> <br><br>Education <br>Bachelor’s Degree in Business Administration<br>MBA in Business Administration<br><br><br><br> </div>

Key Responsibilities:<br>- Maintain and continuously update the Group Fixed Assets Register.- Verify the existence, condition, and location of all assets through regular physical checks.- Coordinate with Finance and Supply Chain Division on capitalization, tagging, tracking, and reconciliation.- Manage asset transfers, disposals, and depreciation.- Confirm asset availability before approving new purchases.- Lead full physical stock takes across all sites.- Ensure all asset data is accurately recorded and reconciled in IFS Cloud and the Fixed Assets Management (FAM) system.- Support the implementation of asset tagging solutions (QR codes / GPS where applicable).- Enforce Fixed Assets policies and internal controls across the Group.<br>What We’re Looking For:<br>- Bachelor’s degree in accounting, Finance, Business Administration, or Engineering.- 5+ years of experience in Fixed Assets Management, Asset Control, or Financial Accounting.- Strong experience with ERP systems (IFS Cloud experience is a plus).- Proven experience handling multi-site asset portfolios.- Hands-on experience in physical asset verification and monitoring.- Strong coordination, leadership, and analytical skills.<br>Applicants must have a valid Kuwait Driver's License.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are looking for a creative and detail-oriented Photographer to join our team in Kuwait. The ideal candidate will have at least 1 year of experience in product photography and a strong eye for aesthetics, lighting, and composition. This role also involves supporting content creation for social media, including basic videography.</p><p>&nbsp;</p><p>Key Responsibilities:</p><p>- Capture high-quality product photos for e-commerce, social media, and marketing campaigns</p><p>- Plan and execute creative photoshoots aligned with brand identity</p><p>- Edit and retouch images to meet brand standards</p><p>- Assist in styling setups (props, backgrounds, lighting)</p><p>- Shoot and edit basic video content (Reels, short-form videos)</p><p>- Collaborate with the marketing team on campaigns and mood boards</p><p>&nbsp;</p><p>Requirements:</p><p>- Minimum 1 year of experience in photography (preferably product photography)</p><p>- Strong portfolio showcasing product and creative work</p><p>- Proficiency in editing tools (Adobe Lightroom, Photoshop, or similar)</p><p>- Basic videography and video editing skills (preferred)</p><p>- Creative mindset with attention to detail</p><p>- Ability to work under deadlines</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Preferred Skills:</p><p>- Experience with social media content creation</p><p>- Knowledge of lighting techniques and studio setup</p><p>- Ability to bring creative ideas to life</p><p>&nbsp;</p><p>&nbsp;</p><p><br></p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Evaluate partners and identify weaknesses. Identify training needs according to business needs. Based on research, plan and implement training programs that will prepare partners for success on talabat. Build a daily, weekly, or monthly training program. Present and understand all the technical and support training requirements. Encourage all relevant stakeholders to attend the training. Oversee partner attendance and performance. Track partner success and progress. Manage the production of program material in collaboration with the Vendor Operations Specialist and TGO team. Communicate all the training programs on a timely basis. Prepare and deliver training courses. Showcase and explain the main KPIs we will monitor in the future. Prepare and present reports on training program KPIs.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>1-3 years of experience as a Training Specialist or similar role.</li><li>1-3 years of experience with designing training programs and workshops.</li><li>Ability to lead a full training cycle.</li><li>Knowledge of various training and teaching methods.</li><li>Excellent decision making and organizational skills.</li><li>A sense of ownership and pride in your performance and its impact on the company s success.</li><li>Critical thinker and problem-solving skills.</li><li>Team player.</li><li>Good time-management skills.</li><li>Great interpersonal and communication skills.</li><li>Proficiency in MS Office and database software.</li></ul><p></p></section>

POSITION OBJECTIVE<br><br> The position is responsible to develop, deliver and communicate visual concepts and promote the brand, products and services in-store Train and coach the store team to perform merchant based VP and manage the daily, weekly and seasonal VP tasks<br><br>Key Responsibilities<br><br>Brand Image - Ensure that the brand identity and presentation standards in both windows and in-store are achieved consistently by creating eye catching displays whilst incorporating commercial sales opportunities<br><br> Implements the brand specific visual merchandising standards Coordinating store display in line with brand guidelines and strategy Developing floor plans and maximize visual impact Arranges merchandise, signage, fixtures and in-store layout guide Taking Photograph in every changes done in the merchandise display Make use of creative lighting for windows Maximizing placement of new lines, re-merchandising the store when new trends build Creates layout of the store according to its categories Ensures proper merchandising of the items Collect review and feedback of the merchandise Other Responsibilities Working closely with the operations and brand management team to increase sales Working with VM Manager and sales team to achieve commercial goals Involve in Pre-Opening of the stores and timely visit to ensure that brand’s standard are properly implemented and followed Conduct research of the current market trends and lifestyle

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Byron Recruitment is currently seeking experienced Secondary School teachers to join our team in Kuwait working with a U.K. Curriculum. As an IGCSE English Teacher , you will be responsible for creating a safe and nurturing environment where our students can learn and develop. Start Date September 2026. Responsibilities: Plan and deliver a high-quality curriculum that meets the needs of all students Create a warm and welcoming environment where students feel safe, valued, and respected Observe and assess students' development, and use this information to plan next steps in their learning Work in partnership with parents and carers to support students' learning and development Maintain accurate records of students' progress and achievements Attend staff meetings, training sessions, and other professional development opportunities as required Ensure that the classroom environment is clean, tidy, and well-organized Support students's personal, social, and emotional development, as well as their physical and cognitive development</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree in Education At least 3-5 years of experience Knowledge of the British curriculum and assessment framework Excellent English communication skills, both verbal and written Ability to work collaboratively with colleagues, parents, and other stakeholders Strong organizational and time management skills Ability to adapt to a new culture and work in a multicultural setting If you are passionate about working with young children and are looking for a new challenge, we encourage you to apply for this exciting opportunity.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>About the opportunity<br><ul><li>Evaluate partners and identify weaknesses.</li><li>Identify training needs according to business needs.</li><li>Based on research, plan and implement training programs that will prepare partners for success on talabat.</li><li>Build a daily, weekly, or monthly training program.</li><li>Present and understand all the technical and support training requirements.</li><li>Encourage all relevant stakeholders to attend the training.</li><li>Oversee partner attendance and performance.</li><li>Track partner success and progress.</li><li>Manage the production of program material in collaboration with the Vendor Operations Specialist and TGO team.</li><li>Communicate all the training programs on a timely basis.</li><li>Prepare and deliver training courses.</li><li>Showcase and explain the main KPIs we will monitor in the future.</li><li>Prepare and present reports on training program KPIs.</li></ul><br>What you need to be successful<br><ul><li>1-3 years of experience as a Training Specialist or similar role.</li><li>1-3 years of experience with designing training programs and workshops.</li><li>Ability to lead a full training cycle.</li><li>Knowledge of various training and teaching methods.</li><li>Excellent decision making and organizational skills.</li><li>A sense of ownership and pride in your performance and its impact on the company’s success.</li><li>Critical thinker and problem-solving skills.</li><li>Team player.</li><li>Good time-management skills.</li><li>Great interpersonal and communication skills.</li><li>Proficiency in MS Office and database software.<br> </li></ul><br>Who we are<br><p>Talabat is part of the Delivery Hero Group, the world’s pioneering local delivery platform, our mission is to deliver an amazing experience—fast, easy, and to your door. We operate in around 65 countries worldwide. Headquartered in Berlin, Germany. Delivery Hero has been listed on the Frankfurt Stock Exchange since 2017 and is part of the MDAX stock market index.</p><br><br> <br><br> </div>