Maintenance Technician Jobs - Capital Governorate (Kuwait) Kuwait

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide technical expertise on fire engines, rescue vehicles, airport rescue and firefighting (ARFF) vehicles, tankers, aerial platforms, and specialized firefighting vehicles.</p><p>Review and evaluate technical specifications, drawings, datasheets, and manufacturer documentation.</p><p>Support procurement activities by preparing technical specifications, evaluating vendor proposals, and participating in technical bid evaluations.</p><p>Ensure fire vehicles comply with applicable safety regulations, operational requirements, and recognized industry standards.</p><p>Recommend fleet upgrades, modifications, and equipment improvements to enhance operational capability.</p><p>Support emergency response operations by providing technical assistance when required.</p><p>Knowledge in:</p><ul><li>Fire vehicle construction and design</li><li>Fire pumps and water delivery systems</li><li>Foam proportioning systems</li><li>Hydraulic rescue equipment</li><li>Diesel engines and powertrains</li><li>Heavy vehicle electrical and electronic systems</li><li>Pneumatic and hydraulic systems</li><li>Vehicle diagnostics and troubleshooting</li><li>Preventive and corrective maintenance</li><li>Fleet management principles</li><li>Technical specifications and procurement</li><li>Inspection, testing, and commissioning of emergency vehicles</li><li>Occupational health and safety requirements</li><li>Emergency vehicle operational standards and best practices</li></ul><p>Skills:</p><ul><li>Strong technical and analytical skills</li><li>Ability to interpret engineering drawings and technical manuals</li><li>Inspection and quality assurance</li><li>Project coordination</li><li>Vendor and supplier coordination</li><li>Communication and presentation skills</li><li>Computer proficiency, including Microsoft Office and computerized maintenance management systems (CMMS)</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in mechanical engineering, Automotive Engineering, Fire Protection Engineering, or a related engineering discipline.</p><p>Relevant professional experience in fire vehicle maintenance, emergency vehicle engineering, fleet management, or heavy vehicle maintenance.</p><p>Experience with municipal, industrial, military, or airport firefighting vehicles is preferred.</p><p></p></section>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance. Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements.USAF equivalent position is Munitions/Weapons Technician Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li><li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li><li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li><li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li><li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li><li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li><li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li><li>Maintain weapons certification and currency.</li><li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li><li>Perform all other duties as assigned or requested.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have High School diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required.</li><li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li><li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li><li>Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> <b>Job Summary</b> </p> <p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. </p> <p> </p> <p>Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance. </p> <p> </p> <p>Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements. </p> <p> </p> <p>USAF equivalent position is Munitions/Weapons Technician Apprentice.<b> </b> </p> <p> </p> <p> <b>Essential Responsibilities: </b> </p> <p> </p> <p> Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. </p> <p> Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components. </p> <p> Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures. </p> <p> Inspect bomb release systems and missile launchers to determine need for repair or destruction. </p> <p> Assist in management of all inspection, maintenance, and storage of munitions and support equipment. </p> <p> Support quality assurance, compliance, continuity, and standardization of munitions programs. </p> <p> Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems. </p> <p> Maintain weapons certification and currency. </p> <p> Assist with availability and serviceability of munitions to support and meet customer requirements. </p> <p> Perform all other duties as assigned or requested.</p> <p> </p> <p> <b>Minimum Requirements:</b> </p> <p> </p> <p> Must have High School diploma or have completed relevant military and/or vocational technical school curriculum. </p> <p> Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required. </p> <p> Completed USAF Munitions/Weapons Tech School or DoD equivalent. </p> <p> Must possess basic knowledge of technical publications related to aircraft maintenance. </p> <ul> <li>Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo</li> </ul> <p> Must be able to inspect and operate ground support and auxiliary equipment. </p> <p> Must achieve a passing grade in all required courses/certifications for continued employment, as needed. </p> <p> Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment. </p> <ul> <li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li> </ul> <p> Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods. </p> <p> Must be able to speak, read, write, and understand English. </p> <p> Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance. </p> <p> Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</p> <p> Must submit updated SF-86 within 30 days of hire start date. </p> <p> Must have current/active State Issued Driver s License. </p> <p> Must be able to acquire and maintain a valid flight-line Government Driver s License. </p> <p> Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages. </p> <p> Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</p> <p> </p> <p> <b> Preferred Qualifications:</b> </p> <p> <b> </b> </p> <p> Associate degree in a relevant career field. </p> <p> RPA Deployment Experience. </p> <p> Prior Experience as a Defense Contractor. </p> <p> Munitions/Weapons experience within the last 10 years<b>. </b> </p> <p> </p></div></section>

<p><h4>Position summary</h4> <p>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards.</p> <p>Display advanced ability to read standard blueprints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks.</p> <p>Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters—ensuring all methods, materials and practices meet company standards and local and national codes—with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TVs. Use the Lockout/Tagout system before performing any maintenance work.</p> <p>Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds.</p> <p>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs,</p><p></p>

<p><h4>Job summary</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance.</p> <p>Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements.</p> <p>USAF equivalent position is Munitions/Weapons Technician Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li> <li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li> <li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li> <li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li> <li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li> <li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li> <li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li> <li>Maintain weapons certification and currency.</li> <li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li> <li>Perform all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft munitions/weapons maintenance experience required.</li> <li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li> <li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Munitions/weapons experience within the last 10 years.</li> </ul></p><p></p>

<p><h4>About Jumeirah</h4> <p>Jumeirah, a global leader in luxury hospitality and a member of Dubai Holding, operates an exceptional portfolio of 29 properties across 11 countries in the Middle East, Europe, and Asia. In 1999, Jumeirah changed the face of luxury hospitality with the opening of the iconic Jumeirah Burj Al Arab and the brand is now renowned worldwide for its distinguished beachfront resorts, esteemed city hotels and exclusive residences. From the contemporary Maldivian island paradise at Jumeirah Olhahali Island to the art-inspired Jumeirah Capri Palace in Italy and the modern twist on a British classic at Jumeirah Carlton Tower in London, the brand has become synonymous with warm and generous service and the ability to craft distinctive and purposeful experiences that bring joy to guests from across the world.</p> <h4>About Jumeirah Messilah Beach</h4> <p>Jumeirah Messilah Beach is a beachfront resort in Kuwait, set in a secluded location with easy access to the city’s business district, airport and main attractions. The property offers a range of dining destinations, wellness experiences at Talise Spa, and dedicated facilities for meetings and events. Ideal for both business and leisure, it blends comfort, connectivity, and Arabian hospitality.</p> <h4>About the Job</h4> <p>An exciting opportunity has arisen for a Plumbing Technician to join the Engineering team at Jumeirah Messilah Beach.</p> <p>The main duties and responsibilities of this role include:</p> <ul> <li>Carry out preventive and corrective maintenance on all plumbing systems including water supply lines, drainage systems, pumps, water heaters, and sanitation fixtures.</li> <li>Inspect and repair leaks, clogs, and malfunctions in guest rooms, public areas, and service areas.</li> <li>Maintain proper and safe condition of all plant, plant rooms, equipment and work areas.</li> <li>Comply with JEMS and all fire, life, health, and safety standards.</li> <li>Install, replace, and maintain plumbing fixtures such as faucets, sinks, toilets, showers, and valves.</li> <li>Maintain and service water filtration, softening, and treatment systems.</li> <li>Maintain hot and cold-water systems, including calorifiers, boilers, circulation pumps, swimming pools, and fountains.</li> </ul> <h4>About You</h4> <p>The ideal candidate for this position will have the following experience and qualifications:</p> <ul> <li>Hold a diploma or certificate in plumbing / mechanical maintenance or related technical field.</li> <li>Demonstrate good oral and written communication is an advantage.</li> <li>Have at least a grade 10 level in education with a good moral background in educational attainment.</li> <li>Possess software competencies – Microsoft Office programs (intermediate).</li> <li>Have 1+ years of experience in the technical department.</li> </ul> <h4>About the Benefits</h4> <p>Besides generous F&B benefits and reduced hotel rates across our hotels globally, this role has excellent employee benefits making the role attractive to high performers and any applicant who likes to associate himself or herself with one of the most luxurious brands in the hospitality industry.</p></p><p></p>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance. Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements. USAF equivalent position is Munitions/Weapons Technician Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li><li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li><li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li><li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li><li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li><li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li><li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li><li>Maintain weapons certification and currency.</li><li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li><li>Perform all other duties as assigned or requested.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have High School diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required.</li><li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li><li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li><li>Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications:</p><ul><li>Associate degree in a relevant career field.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Munitions/Weapons experience within the last 10 years .</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance. Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements. USAF equivalent position is Munitions/Weapons Technician Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li><li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li><li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li><li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li><li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li><li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li><li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li><li>Maintain weapons certification and currency.</li><li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li><li>Perform all other duties as assigned or requested.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must have High School diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required.</li><li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li><li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li><li>Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications:</p><ul><li>Associate degree in a relevant career field.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Munitions/Weapons experience within the last 10 years .</li></ul><p></p></section>

<p><h4>Job Description</h4> <p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Conduct the training and examination on all NDT methods to certify and to re-certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.</p> <p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p> <p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p> <p>Establish radiation areas for radiographic operations.</p> <p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p> <p>Perform nondestructive inspection on structures, components, and systems.</p> <p>Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p> <p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p> <p>Operate, maintain, and inspect nondestructive equipment.</p> <p>Perform operator maintenance and service inspections on shop equipment and tools.</p> <p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p> <p>Perform silver recovery functions.</p> <p>Handle and dispose of hazardous waste and materials.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum Requirements:</h4> <ul> <li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li> <li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li> <li>Three (3) years’ experience as a Non Destructive Inspection (NDI).</li> <li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/DIDC Training).</li> <li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li> </ul> <h4>Security Clearance Requirements:</h4> <ul> <li>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance.</li> <li>Must be able to obtain and maintain facility credentials/authorization.</li> <li>US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li> </ul> <h4>Additional and Preferred Qualifications:</h4> <ul> <li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li> <li>Capable of assuming technical responsibility for the NDT facility and staff.</li> <li>Capable of selecting the method and technique for a specific inspection.</li> <li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li> <li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li> <li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical Requirements/Working Environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Title: Master HVAC Technician - TS/SCI Job Category: Engineering and Technical Support Time Type: Full time Minimum Clearance Required to Start: TS/SCI Employee Type: Regular-Long Term Assignment Percentage of Travel Required: Up to 10% Type of Travel: Outside Continental US * * * The Opportunity: CACI is seeking a Master HVAC Technician to support our program in support to our mission critical client in Kuwait. As the selected candidate, you will perform inspections on HVAC systems and components (e.g. heating units, building exhaust fans, ventilation units, etc.) to evaluate condition, identify necessary repairs and recommend or perform preventive maintenance. Cleans, lubricates, and repacks the working parts of the system. Responsibilities: Tracks performance of routine and preventative maintenance to ensure availability of HVAC systems and troubleshoot HVAC/R systems with complex problems and extensive repairs requiring judgement to locate malfunctions. Respond to service calls and preventive maintenance inspections and produce reports in writing through computerized maintenance management system (CMMS) regarding malfunctioning/inoperable equipment. Responds to emergency situations during and after hours to resolve issues. Diagnoses causes of problems and/or failures in HVAC systems for the purpose of identifying equipment and/or systems repair and/or replacement needs. Install, repair, and maintain large commercial and industrial ventilation, refrigeration, air conditioning (AC), and cooling systems with complex problems and extensive repairs. Independently perform recurring work on exhaust fans, boilers, air handlers, pump, motors, air dryers, and other related HVAC equipment but not limited to HVAC control and monitoring systems. Installs, modifies, overhauls, repairs, and maintains a variety of complex HVAC equipment air conditioning, air handlers, pumps, motors, valves, heating systems, and associated auxiliary and control equipment. Works with engineering or scientific personnel to discuss plans, modifications, and user needs. Reviews available plans, specifications, or drawings; determines the size, shape, and location of equipment. Performs design, modification, maintenance and repair of critical environmental and energy support systems and associated highly sensitive state-of-the-art computerized controls and air quality monitoring systems located within US-Only areas of Intelligence and Security Command (INSCOM) Sensitive Compartmented Information Facilities (SCIFs). Provides critical advanced technical knowledge in support of unique security requirements inherent in Intelligence and Security Command (INSCOM) Sensitive Compartmented Information Facilities (SCIFs)operations including sound baffling techniques/equipment and the resolution of compromising electrical currents, as sustainment of high system availability rates. Produces classified technical documentation outlining in depth technical findings and recommendations. Provides design, emergency non-routine fault isolation of smoke removal systems, fire detection/suppression equipment used exclusively in critical, highly sensitive Military Forces installations. Performs system and subsystem diagnostics and scheduling and maintaining complex electronic environmental systems, calibration, and lubrication of unique components and controls that are used to provide and monitor precise environmental conditions within SCIFs housing unique military intelligence equipment, scientific devices, and technologies. Performs periodic, worldwide deployments in strategic and tactical mobile facility environments. Provides expert technical assistance for a 24-hour operational environment with limited documentation resources. Responds to off-duty (evening and weekend) calls to support critical system outages and to provide rapid fault isolation and resolution concerning environmental factors affecting ISR system performance to include developing technical documentation for ISR support system layouts. Supports US Army systems on site whenever and wherever deployed. Available to deploy to other countries and/or theaters to perform quick reaction technical support to US forces worldwide military contingency missions and requirements in potentially hazardous work environments. What You Can Expect: A culture of integrity. At CACI, we place character and innovation at the center of everything we do. As a valued team member, you ll be part of a high-performing group dedicated to our customer s missions and driven by a higher purpose to ensure the safety of our nation. An environment of trust. CACI values the unique contributions that every employee brings to our company and our customers - every day. You ll have the autonomy to take the time you need through a unique flexible time off benefit and have access to robust learning resources to make your ambitions a reality. A focus on continuous growth. Together, we will advance our nation's most critical missions, build on our lengthy track record of business success, and find opportunities to break new ground in your career and in our legacy. Pay Range : There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. The proposed salary range for this position is: $51,800-$106,200 CACI is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree and three years of experience College, Vocational School, or High School diploma or equivalent and a combination of 10 years education and experience with a valid Master HVAC license, or equivalent, at a State level; or 12 years experience in an equivalent Military HVAC training/certification. Specific experience in fault isolation and resolution of tactical and strategic environmental systems and their sophisticated electronic support systems. Ability to plan, install, troubleshoot and repair equipment and systems not fully covered by technical manuals, schematics, etc. 4 years experience with HVAC control and monitoring systems and their components. Experience with computerized maintenance management systems (CMMS). Expert level experience in design, installation and sustainment of computer controlled environmental systems in mobile secure facilities. Required to meet US Government accepted and industry standards criteria for technically complex computer environmental systems, uninterrupted power distribution systems, and power control equipment. Possess a North American Technician Excellence (NATE) certification. Able to maneuver in small spaces and lift up to 50lbs. US Citizen. Active TS/SCI clearance REQUIRED.</p><p></p></section>

<p><h4>Job description</h4> <p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Conduct the training and examination on all NDT methods to certify and to re-certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.</p> <p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p> <p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p> <p>Establish radiation areas for radiographic operations.</p> <p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p> <p>Perform nondestructive inspection on structures, components, and systems.</p> <p>Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p> <p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p> <p>Operate, maintain, and inspect nondestructive equipment.</p> <p>Perform operator maintenance and service inspections on shop equipment and tools.</p> <p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p> <p>Perform silver recovery functions.</p> <p>Handle and dispose of hazardous waste and materials.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum requirements</h4> <p>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</p> <p>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</p> <p>Three (3) years’ experience as a Non Destructive Inspection (NDI).</p> <p>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/DIDC Training).</p> <h4>Security clearance requirements</h4> <p>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a clearance and for facility credentials/authorization to work at this facility.</p> <h4>Additional and preferred qualifications</h4> <ul> <li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li> <li>Capable of assuming technical responsibility for the NDT facility and staff.</li> <li>Capable of selecting the method and technique for a specific inspection.</li> <li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li> <li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li> <li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p><p>• Conduct the training and examination on all NDT methods to certify and to re- certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p><p>• Determine test method and prepare fluids and parts for nondestructive inspection.</p><p>• Interpret nondestructive inspection test results and provide information about defects to repair center.</p><p>• Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p><p>• Establish radiation areas for radiographic operations.</p><p>• Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p><p>• Perform nondestructive inspection on structures, components, and systems.</p><p>• Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p><p>• Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p><p>• Operate, maintain, and inspect nondestructive equipment.</p><p>• Perform operator maintenance and service inspections on shop equipment and tools.</p><p>• Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p><p>• Perform silver recovery functions.</p><p>• Handle and dispose of hazardous waste and materials</p><p>• Perform other qualified duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li><li>Three (3) years experience as a Non Destructive Inspection (NDI).</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li><li>Capable of assuming technical responsibility for the NDT facility and staff.</li><li>Capable of selecting the method and technique for a specific inspection.</li><li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li><li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li><li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul><p></p></section>

<p><h4>Principal accountabilities</h4> <p>Inspects and approves completed maintenance actions, solves repair problems by studying drawings, wiring diagrams and schematics, and technical publications.<br> Inspects, instructs, services and certifies individual and crew equipment.<br> Order, receive and inventory kits and components.<br> Resolve shipping discrepancies.<br> Ensure proper fit of crew member clothing.<br> Maintain ALSE and NVD for DoS and DI personnel.<br> Maintain computerized inventories and records to ensure timely and accurate compliance with inspection intervals.<br> Provides instruction to contractor and host nation personnel regarding the proper use and care of equipment.<br> Perform other duties as assigned.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent is required.<br> One (1) year verifiable experience as an ALSE technician.<br> Must possess a certificate of training as a school trained ALSE technician.<br> Valid US passport (minimum 2.5 years validity) required for deployment to Germany.<br> Ability to obtain and maintain a US government security clearance, NAC-I T1 public trust. US citizenship is required to obtain a T1/CAC NACI clearance.<br> Must meet and be able to pass CENTCOM medical requirements prior to deployment.<br> Ability to obtain a favorable background check for Kuwait PCC and obtain a Kuwait visa.</p> <h4>Knowledge & skills</h4> <ul> <li>CMF 92 supply & services MOS series or other military/commercial equivalent (92R MOS preferred).</li> <li>Must have working knowledge of aircrew and aircraft LSE requirements for extreme environmental and high risk areas of operation.</li> <li>Must be able to ascertain LSE requirements for a multi-type aircraft environment.</li> <li>Must have knowledge of basic theory of flight and aircraft systems nomenclatures.</li> <li>Must have knowledge of flight line/ramp safety procedures and aircraft fire-fighting procedures.</li> <li>Must have knowledge of aviation maintenance data systems and associated documentation/forms.</li> <li>Must have knowledge of life support equipment maintenance tools and tool control procedures.</li> <li>Must be knowledgeable of principles of instruction.</li> <li>Must have knowledge of seat kit survival components.</li> <li>Must have knowledge of aircrew life raft and life preserver inspections/maintenance.</li> <li>The ability to obtain and maintain a moderate risk public trust (MRPT) through Department of State background investigation is a condition of continued employment.</li> <li>Must possess or have the ability to obtain a U.S. passport before assignment, including renewal and additional pages if applicable.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for up to six hours per day and sit for up to two hours per day.</li> <li>Must be able to climb stairs, ramps, ladders and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to carry, push or pull up to 50 pounds.</li> <li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of seven feet.</li> <li>Must be able to communicate by voice and detect sounds.</li> <li>Must be able to distinguish color and judge three dimensional depths.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must have minimum 20/100 near and far vision, correctable to 20/20. Also must be able to focus night vision devices (NVD) at a distance of at least 20 feet.</li> <li>Be able to travel to and between remote location(s).</li> <li>Travel to austere or inhospitable high stress environments may be required.</li> <li>Ability to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure may be required.</li> <li>May be exposed to extreme noise from turbine and jet engine aircraft.</li> <li>May be exposed to fumes or airborne particles.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, and aircraft.</li> <li>Will be exposed to surface obstructions (ladders, stairs, etc.).</li> <li>May be exposed to chemical, mist, gas, vapors, ultra-violet and infra-red radiation.</li> </ul></p><p></p>

<p><h4>Job summary</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance.</p> <p>Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements.</p> <p>USAF equivalent position is Munitions/Weapons Technician Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li> <li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li> <li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li> <li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li> <li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li> <li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li> <li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li> <li>Maintain weapons certification and currency.</li> <li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li> <li>Perform all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft munitions/weapons maintenance experience required.</li> <li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li> <li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Munitions/weapons experience within the last 10 years.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Prepares weekly, monthly, quarterly, and annual utilization schedules for maintenance. Maintains proficiency in operations of the USAF Maintenance Information System including Core Automated Maintenance System (CAMS), Centralized Engine Management System (CEMS), and other maintenance management database library programs. Maintains equipment records in library files. Collects, reviews, and files documented information for planning and scheduling of various maintenance activities. Ensures accurate documentation is maintained for aircraft engines, munitions, missiles, AGE configurations, Time Compliance Technical Orders, time change items, and special inspections.</p> <p>USAF equivalent position is Aircraft Scheduling & Documentation Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Assist in the preparations of the weekly, monthly, quarterly, and annual utilization schedules for maintenance.</li> <li>Will oversee TCTO process for completion and proper documentation with IMDS and/or CEMS.</li> <li>Maintains assigned aircraft/equipment records in database library files within IMDS and/or CEMS.</li> <li>Assists in the collection, review, and filing of documented information for planning and scheduling of RPA maintenance activities.</li> <li>Ensure accurate documentation is maintained for aircraft engines, munitions, missiles, AGE configurations, Time Compliance Technical Orders, time change items, and special inspections.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one-year actual aircraft plans & scheduling experience required.</li> <li>Must possess basic planning and organizational skills.</li> <li>Must be able to work under deadlines with minimal supervision.</li> <li>Must be able to gain/maintain CEMS access for engine management purposes.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have a current/active U.S. driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Plans and scheduling experience within the last 10 years.</li> <li>RPA operations & deployment experience.</li> <li>Previous experience as engine manager with CEMS experience.</li> <li>Prior experience as a defense contractor.</li> <li>Previous MQ-9 plans and scheduling experience desired.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis. Conduct the training and examination on all NDT methods to certify and to re- certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189. Determine test method and prepare fluids and parts for nondestructive inspection. Interpret nondestructive inspection test results and provide information about defects to repair center. Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action. Establish radiation areas for radiographic operations. Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data. Perform nondestructive inspection on structures, components, and systems. Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment. Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors. Operate, maintain, and inspect nondestructive equipment. Perform operator maintenance and service inspections on shop equipment and tools. Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment. Perform silver recovery functions. Handle and dispose of hazardous waste and materials Perform other qualified duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li><li>Three (3) years experience as a Non Destructive Inspection (NDI).</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li><li>Capable of assuming technical responsibility for the NDT facility and staff.</li><li>Capable of selecting the method and technique for a specific inspection.</li><li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li><li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li><li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Aviation Life Support Equipment (ALSE) Technician serves as focal point for all logistics and repair functions for all supplied ALSE, first aid kits and Night Vision Devices. Principal Accountabilities Inspects and approves completed maintenance actions, solves repair problems by studying drawings, wiring diagrams and schematics, and technical publications. Inspects, instructs, services and certifies individual and crew equipment Order, receive and inventory kits and components Resolve shipping discrepancies Ensure proper fit of crew member clothing Maintain ALSE and NVD for DoS and DI personnel Maintain computerized inventories and records to ensure timely and accurate compliance with inspection intervals Provides instruction to contractor and host nation personnel regarding the proper use and care of equipment Perform other duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High School diploma or equivalent is required.</li><li>One (1) year verifiable experience as an ALSE technician.</li><li>Must possess a certificate of training as a school trained ALSE Technician.</li><li>Valid US Passport (minimum 2.5 years validity) Required for deployment to Germany.</li><li>Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust.</li><li>** US Citizenship is required to obtain a T1/CAC NACI Clearance.</li><li>Must meet and be able to pass CENTCOM Medical requirements, prior to deployment.</li><li>Ability to obtain a favorable background check for Kuwait PCC and obtain a Kuwait Visa.</li></ul><p>Knowledge &amp; Skills</p><ul><li>CMF 92 Supply &amp; Services MOS series or other military/commercial equivalent (92R MOS preferred)</li><li>Must have working knowledge of aircrew and aircraft LSE requirements for extreme environmental and high risk areas of operation</li><li>Must be able to ascertain LSE requirements for a multi-type aircraft environment</li><li>Must have knowledge of basic theory of flight and aircraft systems nomenclatures</li><li>Must have knowledge of flight line/ramp safety procedures and aircraft fire-fighting procedures</li><li>Must have knowledge of aviation maintenance data systems and associated documentation/forms</li><li>Must have knowledge of life support equipment maintenance tools and tool control procedures</li><li>Must knowledgeable of principles of instruction</li><li>Must have knowledge of seat kit survival components</li><li>Must have knowledge of aircrew life raft and life preserver inspections/maintenance</li><li>The ability to obtain and maintain a Moderate Risk Public Trust (MRPT) through Department of State Background Investigation is a condition of continued employment</li><li>Must possess or have the ability to obtain a U.S. Passport before assignment, this includes renewal and additional pages if applicable.</li></ul><p>Physical Requirements/Working Environment</p><ul><li>Must be able to walk and stand on level and/or inclined surfaces for up to six hours per day and sit for up to two hours per day</li><li>Must be able to climb stairs, ramps, and ladders and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to carry, push or pull up to 50 pounds</li><li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet</li><li>Must be able to communicate by voice and detect sounds</li><li>Must be able to distinguish color and judge three dimensional depths</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc</li><li>Must have minimum 20/100 near and far vision, correctable to 20/20. Also must be able to focus night vision devices (NVD) at a distance of at least 20 feet</li><li>Be able to travel to and between remote location(s)</li><li>Travel to austere or inhospitable high stress environments may be required</li><li>Ability to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure may be required</li><li>May be exposed to extreme noise from turbine and jet engine aircraft</li><li>May be exposed to fumes or airborne particles</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, and aircraft</li><li>Will be exposed to surface obstructions (ladders, stairs, etc)</li><li>May be exposed to chemical, mist, gas, vapors, ultra-violet and infra-red radiation.</li></ul><p></p></section>

<p>Role &amp; Responsibilities We are seeking experienced Service Engineers, Senior Service Technicians, and Service Technicians for a leading Industrial Service Company in Kuwait specializing in compressed air systems. The candidate should have hands-on experience in maintenance, troubleshooting, overhaul, installation, commissioning, and repair of oil-injected rotary screw air compressors and compressed air dryers.</p><p>Compressor Brands Experience (Any One or More)</p><ul><li>Atlas Copco</li><li>Ingersoll Rand</li><li>Gardner Denver</li><li>Kaeser</li><li>Sullair</li><li>CompAir</li><li>ELGi</li><li>Chicago Pneumatic</li><li>Quincy</li><li>BOGE</li><li>Other internationally recognized industrial compressor brands</li></ul><p>Key Responsibilities</p><ul><li>Preventive and corrective maintenance of rotary screw air compressors.</li><li>Troubleshooting mechanical and electrical faults.</li><li>Major overhaul of compressor packages.</li><li>Airend inspection, repair, and replacement.</li><li>Bearing replacement and mechanical seal replacement.</li><li>Motor replacement and alignment.</li><li>Coupling alignment using dial indicators or laser alignment tools.</li><li>Maintenance of belt-drive and direct-drive compressor systems.</li><li>Oil system and cooling system servicing.</li><li>Replacement of oil separators, oil filters, and air filters.</li><li>Inlet valve, blowdown valve, minimum pressure valve, and thermostatic valve overhaul.</li><li>Solenoid valve troubleshooting and replacement.</li><li>Leak detection and repair.</li><li>Installation and commissioning of compressors after overhaul.</li><li>Performance testing and fault diagnosis.</li><li>Preparation of service reports and customer support documentation.</li></ul><p>Electrical Responsibilities</p><ul><li>Troubleshooting industrial electric motors.</li><li>Working knowledge of Star-Delta starters.</li><li>Experience with Soft Starters.</li><li>Experience with VFD/VSD drives.</li><li>Electrical control panel troubleshooting.</li><li>PLC and electronic compressor controller diagnostics.</li><li>Pressure and temperature sensor troubleshooting.</li><li>Reading and understanding electrical wiring diagrams.</li><li>Electrical fault diagnosis using multimeters and clamp meters.</li></ul><p>Air Dryer Experience</p><ul><li>Refrigerated Air Dryers.</li><li>Heatless Desiccant Dryers.</li><li>Heated Desiccant Dryers.</li><li>Automatic Condensate Drain Systems.</li><li>Air Filtration Systems.</li><li>Moisture Separators.</li><li>Dew Point Controllers.</li></ul><p>Tools Knowledge</p><p>Candidates should be familiar with :</p><ul><li>Dial Indicators</li><li>Laser Alignment Tools</li><li>Torque Wrenches</li><li>Bearing Pullers</li><li>Hydraulic Presses</li><li>Multimeters</li><li>Clamp Meters</li><li>Megger (Insulation Resistance Tester)</li><li>Pressure Gauges</li><li>Infrared Temperature Guns</li><li>Vibration Meters</li></ul><p>Other Requirements</p><ul><li>Good communication skills in English.</li><li>Ability to work independently at customer sites.</li><li>Strong troubleshooting skills.</li><li>Safety-conscious and team-oriented attitude.</li><li>Valid Passport preferred.</li><li>Ready to relocate to Kuwait.</li></ul><p><strong>Desired Candidate Profile</strong></p><h3>Preferred Candidate Profile</h3><p>Qualification</p><ul><li>ITI Mechanical / Electrical</li><li>Diploma in Mechanical Engineering</li><li>Diploma in Electrical Engineering</li><li>Equivalent Technical Qualification</li></ul><p>Experience</p><ul><li>3 to 15 years of relevant experience in industrial air compressor service and maintenance.</li><li>Hands-on field service experience is mandatory.</li><li>Experience in shutdowns, commissioning, and troubleshooting preferred.</li><li>Gulf experience will be an added advantage.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Conducts VTC conferences, operates VTC equipment such as VTC conferencing equipment, consoles, Digital Video Recorders (DVD), cameras, microphones, desktop and laptop computers supporting VTC events. Reports to the Site Manager as required. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position. Responsibilities Coordinates with customer to endure equipment is operational. Sets-up and operates VTC equipment. Establishes end to end secure and non-secure connectivity to support conferences. Establishes proper cable connection and routing to various Audio/Video and communication links. Adjusts sound and light levels for optimum performance of equipment and comfort of customers. Troubleshoots VTC and connectivity problems with local and distant end technical control facilities and help-desks to restore communication and resolve poor reception/transmission issues. Troubleshoots equipment; configures modems and data timing and transfer rates. Resolves connectivity problems with technical personnel. Performs weekly maintenance on all associated VTC equipment. Operates, administers, and maintains the VTC Bridge. Required to manipulate the bridge to provide technical support for all VTC circuits attached. Performs other duties and assignments as required.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Security Clearance: Requires an active Secret Clearance</p><p>Education/Certifications: One year related experience may be substituted for one year of education, if degree is required. High School diploma or GED required.</p><p>Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience. Requires a minimum of 5 years experience in Video Teleconferencing or Audio Video Productions. Must be able to work rotating shift schedules which provide 24 hour day/7 day week coverage. Experience with a customer service-oriented company.</p><p></p></section>