Embedded Systems Engineer Jobs - Capital Governorate (Kuwait) Kuwait

<p>We are looking for an experienced Planning Engineer to join the NBTC Kuwait Operations Equipment Division.</p><p><br></p><p>Role: Other</p><p>Industry Type: Engineering &amp; Construction</p><p>Department: Other</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Other</p><p>Education</p><p>UG: B.Tech / B.E. in Any Specialization</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis. Conduct the training and examination on all NDT methods to certify and to re- certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189. Determine test method and prepare fluids and parts for nondestructive inspection. Interpret nondestructive inspection test results and provide information about defects to repair center. Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action. Establish radiation areas for radiographic operations. Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data. Perform nondestructive inspection on structures, components, and systems. Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment. Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors. Operate, maintain, and inspect nondestructive equipment. Perform operator maintenance and service inspections on shop equipment and tools. Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment. Perform silver recovery functions. Handle and dispose of hazardous waste and materials Perform other qualified duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li><li>Three (3) years experience as a Non Destructive Inspection (NDI).</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li><li>Capable of assuming technical responsibility for the NDT facility and staff.</li><li>Capable of selecting the method and technique for a specific inspection.</li><li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li><li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li><li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul><p></p></section>

<p><h4>Job description</h4> <p>The electrical metrology engineer is the resident expert in his field and, in conjunction with the Kuwait senior engineer, provides engineering and consultant services to the government of Kuwait (GOK). Conducts research and studies new equipment to ensure that the latest developments in technique and equipment are included in metrology planning for future acquisition. Assists in the development and implementation of a metrology QA program as required. Assists in obtaining and maintaining laboratory QA accreditation.</p> <p>Assesses requirements and develops new measurement techniques and approaches related to electrical, electronic, and microwave measurement areas. Develops, tests, and evaluates new calibration methodology, as well as performs analysis and evaluation of equipment. Establishes test and performance criteria, and prescribes calibration approaches, tests, equipment, and servicing requirements necessary to ensure measurement traceability. Directs, conducts, and evaluates the development of calibration procedures for assigned equipment. Conducts liaison and coordinates with technical societies and engineering facilities of other countries to remain current with state-of-the-art and new measurement techniques.</p> <p>Conducts detailed laboratory capability studies to achieve greater support efficiency. Develops laboratory operational, environmental, performance, and safety criteria, and ensures implementation and maintenance.</p> <p>It is anticipated that engineers will be assigned as these job descriptions state and other related specific tasking details and priorities will be determined and set by the commander, KAFMB and communicated to the contractor lead.</p> <h4>Qualifications</h4> <p>Requires an associate’s degree in electrical engineering, engineering technology, physics, or a related technical field from an accredited college or university, and twelve (12) years of work experience operating, maintaining, troubleshooting, repairing, and calibrating electronic precision measurement equipment and calibration laboratory reference standards.</p> <p>Completion of a U.S. military precision measurement and calibration school and twelve (12) years of work experience in the metrology and calibration field.</p> <p>Completion of a precision measurement and calibration school at an accredited school, or within a specialized calibration firm, and twelve (12) years of work experience operating, maintaining, troubleshooting, repairing, and calibrating electronic precision measurement equipment and calibration laboratory reference standards.</p> <p>Five (5) years of experience in technical oversight and training responsibilities of calibration and repair technicians with three (3) years within the last five (5).</p> <p>Experience in researching requirements and maintaining calibration laboratory facility and related environmental control systems.</p> <p>Must have an active US government secret clearance.</p> <p><strong>Note:</strong> US citizenship is required to obtain a secret clearance.</p> <h4>Compensation details</h4> <p>$100,000.00</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p><strong>Note:</strong> Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions and benefits.</p> <h4>Original posting</h4> <p>05/08/2026 - Until filled</p> <p>Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <h4>Equal opportunity employer statement</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under federal laws and supplemental language at labor laws posters.</p></p><p></p>

<p>About the Role: We are seeking an experienced and hands-on Site Supervisor to oversee daily marine construction activities including dredging, piling, rock filling, quay wall construction, and subsea pipeline support works. The ideal candidate will have strong supervisory skills, practical knowledge of marine operations, and the ability to manage site crews, equipment, and subcontractors to ensure safe and efficient project execution. Key Responsibilities: • Supervise daily marine construction activities including dredging, piling, rock dumping, quay wall construction, and pipeline support works • Manage site crews including foremen, operators, riggers, and general workers; assign tasks and monitor productivity • Ensure all activities comply with approved method statements, drawings, specifications, and safety standards • Coordinate with project engineers, superintendents, and subcontractors for smooth execution of marine works • Monitor marine plant and equipment including barges, excavators, cranes, tugs, and dredgers • Conduct daily pre-start inspections of equipment and ensure all machinery is in safe working condition • Enforce HSE protocols including permits, toolbox talks, PPE compliance, and emergency procedures • Monitor material deliveries including rock, aggregates, concrete, and steel; ensure proper handling and storage • Maintain accurate daily records including work progress, manpower, equipment usage, and materials consumed • Report delays, incidents, or technical issues to the Construction Manager or Project Engineer • Liaise with survey teams for positioning, bathymetry, and as-built verification • Ensure vessels and barges are properly moored, secured, and compliant with safety regulations • Coordinate with marine coordinators for vessel movements and logistics • Conduct quality inspections to ensure work meets project specifications • Participate in daily progress meetings and provide input on construction sequences • Mentor and guide junior staff and crew members • Ensure site housekeeping and organization at all times • Assist in preparing daily and weekly progress reports for project management</p><p>Qualifications & Experience: • Diploma or certificate in Civil Engineering, Marine Engineering, Nautical Science, or related field • Minimum 5-7 years of experience as a Site Supervisor in marine construction, dredging, or offshore projects • Strong knowledge of marine construction methods including piling, dredging, rock filling, concrete works, and subsea operations • Experience with marine equipment including barges, excavators, cranes, dredgers, and tugs • Understanding of safety regulations including SOLAS, MARPOL, and local marine requirements • Valid offshore safety certifications (BOSIET/HUET) preferred if working offshore • Familiarity with permit-to-work systems and risk assessment procedures • Proficiency in MS Office; knowledge of planning software is an advantage • Fluency in English; knowledge of Hindi/Urdu or Arabic is a plus • Valid driver's license is preferred Required Skills: • Strong leadership and team management abilities • Effective communication and coordination skills • Problem-solving for operational and technical issues • Attention to detail for quality and safety compliance • Ability to work under pressure and meet deadlines • Physical fitness for on-site work in marine environments • Ability to read and interpret construction drawings and specifications</p>

<p><strong>Job Description:</strong></p><p>Our client, EL-KADESIA Engineering Industries, is an established company operating within the engineering and industrial sector. The company is seeking a technically skilled and customer-focused IT Helpdesk Engineer to provide reliable IT support, maintain day-to-day technology operations, and ensure efficient resolution of end-user technical issues.</p><p><strong>Job Summary:</strong></p><p>Our client is looking for an experienced and service-oriented IT Helpdesk Engineer to provide first-line technical support to employees across on-site and remote environments. The successful candidate will be responsible for troubleshooting hardware, software, network, email, and user-access issues while supporting systems including Windows, Microsoft Office, Active Directory, CCTV, and telephone infrastructure. The role requires strong troubleshooting and problem-solving abilities, excellent communication skills, and the ability to prioritize and resolve multiple technical requests while maintaining high standards of service and information security.</p><p><strong>Key Responsibilities:</strong></p><p><strong>IT Helpdesk &amp; User Support</strong></p><ul><li>Provide first-line technical support to users both on-site and remotely.</li><li>Diagnose and resolve hardware, software, and user-related technical issues.</li><li>Troubleshoot computers, printers, peripheral devices, and software applications.</li><li>Respond to support requests according to established priorities and service levels.</li><li>Document technical issues, solutions, and actions taken.</li><li>Escalate complex incidents to the appropriate technical support level when required.</li></ul><p><strong>Systems &amp; Software Support</strong></p><ul><li>Install, configure, and maintain Windows operating systems and Microsoft Office applications.</li><li>Perform software installations, updates, and configurations in accordance with company policies.</li><li>Manage user accounts and access permissions through Active Directory, including account creation, modification, disabling, and password resets.</li><li>Provide support for Outlook and Exchange, including troubleshooting email synchronization and connectivity issues.</li><li>Support endpoint security solutions, including antivirus and basic cybersecurity tools.</li></ul><p><strong>Network &amp; Infrastructure Support</strong></p><ul><li>Troubleshoot basic LAN, Wi-Fi, and internet connectivity issues.</li><li>Apply practical knowledge of IP addressing, DNS, and DHCP to diagnose network problems.</li><li>Support basic data backup and restoration activities in accordance with approved policies and authorization levels.</li><li>Coordinate with IT and telecommunications service providers when required.</li></ul><p><strong>CCTV &amp; Telephone Systems</strong></p><ul><li>Provide basic technical support for CCTV systems, including monitoring, camera connectivity, and troubleshooting.</li><li>Support IP and analog telephone systems and internal extensions.</li><li>Coordinate with external vendors and service providers to resolve infrastructure-related issues.</li></ul><p><strong>IT Service Management</strong></p><ul><li>Log, classify, track, update, and close incidents through the company's IT ticketing system.</li><li>Maintain accurate records of incidents, resolutions, and recurring technical issues.</li><li>Prepare clear technical documentation to support knowledge sharing and future troubleshooting.</li></ul><p><strong>Qualifications</strong></p><p><strong>Education</strong></p><ul><li>Bachelor's degree in Computer Science, Information Technology, Management Information Systems (MIS), or a related field.</li><li>Equivalent practical experience may be considered where appropriate.</li></ul><p><strong>Experience</strong></p><ul><li>3-5 years of practical experience in an IT Helpdesk, IT Support, or similar technical support role.</li><li>Hands-on experience supporting end users in a corporate or industrial environment is preferred.</li></ul><p><strong>Required Skills</strong></p><ul><li>Strong knowledge of Windows operating systems and Microsoft Office applications.</li><li>Hands-on experience with Active Directory and user account/access management.</li><li>Practical understanding of networking fundamentals, including IP, DNS, and DHCP.</li><li>Strong troubleshooting, analytical, and problem-solving capabilities.</li><li>Good knowledge of Outlook and email troubleshooting.</li><li>Ability to manage multiple support requests and prioritize tasks effectively.</li><li>Strong communication skills with the ability to explain technical solutions clearly to non-technical users.</li><li>Good understanding of information security, confidentiality, and protection of company data.</li><li>Strong customer-service orientation and ability to remain calm when handling urgent incidents.</li><li>Good organizational and time-management skills.</li><li>Ability to work independently as well as collaboratively with internal teams and external service providers.</li></ul><p><strong>Preferred Skills &amp; Experience</strong></p><ul><li>Experience with FortiGate, VPNs, and remote-access solutions.</li><li>Familiarity with IT Service Management and ticketing platforms such as ServiceNow or Jira.</li><li>Basic knowledge of Linux or macOS.</li><li>Good understanding of cybersecurity principles and endpoint-protection solutions.</li><li>Experience supporting CCTV systems and IP/analog telephone systems.</li><li>Experience coordinating with telecommunications, IT, and technology service providers.</li></ul><p><strong>Behavioral &amp; Professional Competencies</strong></p><ul><li>High level of commitment, integrity, confidentiality, and professionalism.</li><li>Strong internal customer-service and active-listening skills.</li><li>Ability to handle urgent technical incidents calmly and professionally.</li><li>Strong ability to prioritize tasks and manage multiple support requests.</li><li>Willingness to continuously learn and develop technical knowledge.</li><li>Ability to prepare clear and accurate technical documentation.</li><li>Strong teamwork and coordination skills.</li><li>Ability to work effectively with different departments, vendors, and external service providers.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Computer Science, Information Technology, Management Information Systems (MIS), or a related field. Equivalent practical experience may be considered where appropriate.</li><li>3-5 years of practical experience in an IT Helpdesk, IT Support, or similar technical support role. Hands-on experience supporting end users in a corporate or industrial environment is preferred.</li><li>Strong knowledge of Windows operating systems and Microsoft Office applications.</li><li>Hands-on experience with Active Directory and user account/access management.</li><li>Practical understanding of networking fundamentals, including IP, DNS, and DHCP.</li><li>Strong troubleshooting, analytical, and problem-solving capabilities.</li><li>Good knowledge of Outlook and email troubleshooting.</li><li>Ability to manage multiple support requests and prioritize tasks effectively.</li><li>Strong communication skills with the ability to explain technical solutions clearly to non-technical users.</li><li>Good understanding of information security, confidentiality, and protection of company data.</li><li>Strong customer-service orientation and ability to remain calm when handling urgent incidents.</li><li>Good organizational and time-management skills.</li><li>Ability to work independently as well as collaboratively with internal teams and external service providers.</li><li>Experience with FortiGate, VPNs, and remote-access solutions.</li><li>Familiarity with IT Service Management and ticketing platforms such as ServiceNow or Jira.</li><li>Basic knowledge of Linux or macOS.</li><li>Good understanding of cybersecurity principles and endpoint-protection solutions.</li><li>Experience supporting CCTV systems and IP/analog telephone systems.</li><li>Experience coordinating with telecommunications, IT, and technology service providers.</li><li>High level of commitment, integrity, confidentiality, and professionalism.</li><li>Strong internal customer-service and active-listening skills.</li><li>Ability to handle urgent technical incidents calmly and professionally.</li><li>Strong ability to prioritize tasks and manage multiple support requests.</li><li>Willingness to continuously learn and develop technical knowledge.</li><li>Ability to prepare clear and accurate technical documentation.</li><li>Strong teamwork and coordination skills.</li><li>Ability to work effectively with different departments, vendors, and external service providers.</li></ul>

<p>E-portal is actively recruiting for the role of Senior Presales Network and Infrastructure Engineer. In this role, you will be the lead technical presales specialist for campus, branch, WAN, data center, private cloud, edge, server, storage, virtualization-led opportunities. The role bridges pure networking proposals with wider transformation outcomes such as resilience, automation, observability, TCO reduction, workload performance, and secure user experience. Roles and Responsibilities: Lead technical discovery for campus, branch, data center, private cloud, WAN, WI-FI, compute, storage and back-up requirements. Build integrated infrastructure architectures that combine network, security, compute, storage, virtualization, and automation rather than treating them as separate silos. Design infrastructure refresh, consolidation, and modernization roadmaps, including migration from legacy WAN or traditional campus networks to software-defined and automated environments. Create HLDs, BOMs, RFP responses, migration plans, and technical risk registers for enterprise and government bids. Run customer workshops, solution demonstrations, interoperability discussions, and proof-of-concept or pilot activities. Partner with delivery teams to ensure architecture integrity across implementation, tuning, optimization, and lifecycle support.</p><p><strong>Desired Candidate Profile</strong></p><p>To be considered for the role, you will need to meet the below criteria:<br>A minimum of 11 years of experience across enterprise networking and infrastructure, with strong exposure to SD-WAN, campus switching and wireless, network access control, data center fabrics, private cloud or HCI, compute and storage platforms, observability, and automation. Hold at least one current expert-level infrastructure certifications such as CCEI Enterprise Infrastructure, HPE Aruba Networking Certified Expert variants, Juniper JNCIE-ENT or JNCEI-DC, and VMware Certified Distinguished Expert. Bachelor degree. Master's degree is a plus. Majors preferred are in networks, systems engineering, or infrastructurarchitecture.</p>

<p><h4>Job Description</h4> <p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Conduct the training and examination on all NDT methods to certify and to re-certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.</p> <p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p> <p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p> <p>Establish radiation areas for radiographic operations.</p> <p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p> <p>Perform nondestructive inspection on structures, components, and systems.</p> <p>Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p> <p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p> <p>Operate, maintain, and inspect nondestructive equipment.</p> <p>Perform operator maintenance and service inspections on shop equipment and tools.</p> <p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p> <p>Perform silver recovery functions.</p> <p>Handle and dispose of hazardous waste and materials.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum Requirements:</h4> <ul> <li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li> <li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li> <li>Three (3) years’ experience as a Non Destructive Inspection (NDI).</li> <li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/DIDC Training).</li> <li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li> </ul> <h4>Security Clearance Requirements:</h4> <ul> <li>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance.</li> <li>Must be able to obtain and maintain facility credentials/authorization.</li> <li>US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li> </ul> <h4>Additional and Preferred Qualifications:</h4> <ul> <li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li> <li>Capable of assuming technical responsibility for the NDT facility and staff.</li> <li>Capable of selecting the method and technique for a specific inspection.</li> <li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li> <li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li> <li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical Requirements/Working Environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Quantity Surveyor shall monitor the BOQ's, estimates, schedule of rates and material take-offs as presented by the PC Contractor. These shall be verified by site measuremenunt of materials and manhours expended on the varying workpacks across all disciplines. He shall support the Contract Engineer in the compilation of cost reports and forecasts to completion as required. Measurement and evaluation of final accounts including claims, extra items, deviations, variations and amendments to contracts, Candidate shall be degree qualified and MCIRS affiliated. Will perform liaison duties between Client and Contractor . </p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>12+ Years experience</p><p>Immediately available candidates within Kuwait preferred</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Detailed Engineering of Electrical Substations including Design/ Layout of Substation Building &amp; Equipment, Floor Opening, Earthing, Cable Trays, SLD, Lighting &amp; Small Power System etc. Vendor drawing reviews of 400kV GIS, 132kV GIS, 300MVA, 400/132/33kV Power Transformer, Shunt Reactor, Fire Fighting system, Cables etc. Calculation for cables, Earthing, Lightning, Lighting, Cable Tray, DC UPS &amp; Heat Load Calculation etc. (Oil &amp; Gas and substations) Knowledge in Scheme review &amp; Power and control cable schedule. Experience in tender estimation. Experience in using ETAP software, AutoCAD &amp; DIALLUX Coordination with site team. Relay Setting Calculation.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>BE / B Tech in Electrical Engineer with minimum 5 years of exp. Experience in 400kV/300kV/132kV Substation Design &amp; Packaged Type Substation Design.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Serves as a senior-level satellite communications subject matter expert responsible for advanced installation, configuration, troubleshooting, and sustainment of complex SATCOM systems. Provides technical leadership and oversight for mission-critical communications infrastructure. Lead the installation, operation, maintenance, and troubleshooting of advanced satellite communications systems supporting voice, video, RF, and data networks.Design, configure, and optimize SATCOM solutions in accordance with mission and task-order requirements.Diagnose and resolve complex technical issues involving satellite terminals, modems, and RF systems.Provide technical leadership, mentorship, and oversight to junior technicians.Exercise independent judgment in resolving system-level issues and implementing corrective actions.Support coordination with vendors, engineers, and government stakeholders.Ensure compliance with all security, safety, and operational standards.Maintain detailed technical documentation and reporting for systems and activities.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must meet certification requirements specified in the applicable SPIN-C or individual task order.</li><li>Clearance: Secret</li><li>General Experience: 5+ years of hands-on experience supporting installation, maintenance, repair, and troubleshooting of communications systems.</li><li>Demonstrated ability to solve complex technical problems and understand interrelationships of communications circuits and systems.</li><li>Experience providing technical leadership and supervision.</li><li>Specialized Experience: Expert-level experience with DSCS or commercial satellite terminals, including: X-, C-, Ka-, Ku-band and Tri-band satellite terminals FDMA, TDMA, and IP-based satellite modems</li></ul><p></p></section>

<p>Our client, a leading organization in the oil and gas sector, is seeking an experienced Civil Design Engineer to support critical TA26 projects at their PIC facility in Shuaiba, Kuwait. This temporary position plays a key role in delivering effective and efficient civil engineering design solutions that enhance plant output, performance and reliability within a demanding petrochemical environment.</p><p>Core Responsibilities</p><p>Provide robust civil engineering designs and solutions for TA26 projects, ensuring structural integrity, safety and durability of plant-related infrastructure.</p><p>Optimize civil designs to support maximum plant output and performance while aligning with technical, safety and operational standards.</p><p><strong>Desired Candidate Profile</strong></p><p>8-15 years of total experience in civil engineering, including a minimum of 8 years of hands on Design Engineering within the Oil &amp; Gas / Petrochemical industry. You will bring deep familiarity with industry standards, plant conditions and project execution in complex brownfield environments.</p><p>Bachelor's Degree in Civil Engineering, approved by the Kuwait Society of Engineers, ensuring compliance with local professional and regulatory requirements.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Architecture &amp; Development: Architect, develop, and maintain robust, scalable, and secure front-end applications using Angular (latest versions). Data Visualization: Build high-performance dashboards capable of handling real-time, high-frequency data streams, time-series data, and complex industrial charting. Technical Leadership: Mentoring junior/mid-level developers, establishing front-end coding standards, conducting rigorous code reviews, and driving UI/UX best practices. Collaboration: Work closely with product managers, data scientists, backend engineers, and industrial domain experts to translate complex operational requirements into clean interfaces. Performance Optimization: Optimize application performance for maximum speed, scalability, and seamless rendering of massive datasets. Modernization: Drive the migration of legacy front-end systems into modern, modular Angular architectures (e.g., Micro-frontends, Monorepos).</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum of 10+ years of professional software development experience, with a strict focus on front-end technologies.</li><li>Angular Expertise: 6+ years of deep, hands-on experience with Angular (including RxJS, NgRx/state management, Angular CLI, and standalone components).</li><li>Core Web Tech: Mastery of JavaScript (ES6+), TypeScript, HTML5, and advanced CSS/SASS.</li><li>Testing &amp; CI/CD: Strong experience with front-end testing frameworks (Jest, Cypress, Karma) and integrating front-end builds into CI/CD pipelines.</li><li>Data &amp; APIs: Proficient in consuming complex RESTful APIs and WebSocket connections for real-time data streaming.</li><li>Good communication with English</li><li>Good problem-solving skills</li><li>Good documentation skills</li><li>Flexible to travel to Kuwait</li><li>Experience working as oil and gas domain is preferred</li><li>Landmark Business Domain is preferred</li></ul><p></p></section>

<div><span style="font-size: 11px;">Position in Organization</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">To perform dismantle inspections and root cause failure analysis of Electrical Submersible Pump systems, ensuring accurate diagnosis of failure modes and providing actionable recommendations to improve reliability and extend equipment run life.</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Key Responsibilities</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Disassemble ESP components (pump, motor, seals, gas separators, intakes) following API RP 11S1 and company procedures. Inspect for wear, corrosion, erosion, abrasives, and mechanical damage failure Analysis &amp; Reporting:</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Perform detailed failure mode identification and root cause analysis using structured methodologies. Prepare comprehensive DIFA reports with photographic evidence and technical observations. Convert data into information and provide evidence-based conclusions in a word format professionally written report use framework Situation Complication Question and Answer (SCQA) with evidence-based conclusions. Creates, reviews, updates process and product assembly procedures. May have additional duties to support Workshop, Field Service and other departments.</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Financial &amp; Profit and Loss responsibility</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Prepare summary information for ESP and 3rd party products and service failures direct and indirect cost for the last reporting period. List of recommendations related to product, process improvements inner and with customer. Estimate investment cost to a product and process improvement direct and indirect gains. Drive continuous improvement initiatives to improve ESP Up-time, and ESP failure rates that fall below Target Run Lives.</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">HSE, Quality &amp; Compliance</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Demonstrate proactive reporting, safety ownership, and continuous improvement. Ensure adherence to HSE standards during dismantling and inspection activities. Maintain certifications for electrical safety and hoisting obtentions the current legislation of the State of Kuwait.</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">The Charter of Action Energy Company (hereinafter the Company), decisions, orders and other mandatory regulatory documents.</span></div><div><span style="font-size: 11px;">Company's policies and standards.</span></div><div><span style="font-size: 11px;">Company internal labor regulations.</span></div><div><span style="font-size: 11px;">This job description.</span></div><div><span style="font-size: 11px;">Requirements for regulatory documents of the quality management system.</span></div><div><span style="font-size: 11px;">Rules and regulations of Environment Health and Safety, Industrial Sanitation and Fire Safety.</span></div><div><span style="font-size: 11px;">Rules of labor protection during the operation with electrical equipment (International, Client and Company Electrical Safety standards).</span></div><div><span style="font-size: 11px;">Traffic Rules of the State of Kuwait and Company Driving and Journey Management Standard (when driving a Company or Contracted light vehicle).</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">People Leadership and Development</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Focus efforts on achieving functional objectives, assessing performance, and following individual development plans.</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Technology &amp; Continuous Improvement</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Track equipment performance statistics with a target to improve in company product solutions.</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Qualifications &amp; Experience</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Education: Bachelor’s degree in mechanical, Electrical, or Petroleum Engineering. The DIFA Expert shall have the minimum experience below: -</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Minimum five (5) years’ experience in SPS and Alternate SPS manufacturing, dismantle, inspection and testing. Minimum 2–5 years in ESP systems dismantle inspection and failure analysis. Familiarity with API RP 11S1 standards and artificial lift systems.</span></div><div><span style="font-size: 11px;">For Kuwaiti, minimum two (2) years’ experience in SPS and Alternate SPS manufacturing, dismantle, inspection and testing. Technical Skills: Knowledge of ESP components and failure mechanisms. Proficiency in root cause analysis tools and reporting software. Ability to interpret equipment drawings and operational data. 2. ALS ESP Application Engineer Course DIFA training course. Human error theory. Certifications: Electrical safety certification Hoisting equipment operation certification.</span></div><div><br></div>

<p><h4>Division / Project</h4> <p>KBR's Sustainable Technology Solutions (STS) group is seeking a Project Engineer I – Building & Office Tower Projects to support the planning, design, procurement, construction, and commissioning of office towers, administration buildings, control centers, and associated facility infrastructure under PMC contracts.</p> <h4>Primary objectives</h4> <ul> <li>Management of support services for supervising and directing engineering, procurement, and management of construction contractors appointed by the client.</li> <li>Ensure the successful delivery of projects through all phases, including concept design, FEED, detailed engineering, tendering, construction, commissioning, and handover.</li> <li>Act as primary technical coordination interface with client to ensure that the client’s expectations are satisfied.</li> <li>Ensure the project conforms to the client’s approved basis of design and local authority requirements, building regulations, sustainability objectives, and applicable international codes and standards.</li> <li>Coordinate architectural, structural, MEP, fire protection, security, ICT, vertical transportation, and interior fit-out disciplines to achieve an integrated design solution.</li> </ul> <h4>Responsibilities</h4> <ul> <li>Support project mobilization, setup, takeover, and handover activities.</li> <li>Set up, take over / hand over of projects.</li> <li>Establish clear objectives and deliverables for design consultants and engineering teams.</li> <li>Management of PMC’s engineering teams during FEED. Prepare and review scopes of work, technical specifications, employer requirements, and tender documentation.</li> <li>Compilation of the scope of work documents, technical part of invitation to bid documents, and the documentation of project milestone reviews.</li> <li>Coordination of reviews and comments on engineering and other technical deliverables of third-party companies like P&IDs, line lists, equipment datasheets, instrumentation index, cable routing, etc. within the agreed review time.</li> <li>Ensure compliance with all applicable project standards and specifications.</li> <li>Ensure proper compilation and updating of as-built documents, redlines, MTOs, loop folders, commissioning binders, and handover documentation.</li> <li>Ensure the delivery of the as-built (end of job) documentation to the client in time and good quality.</li> <li>Contribute to the development of overall project schedule.</li> <li>Ensure work progress as per approved schedule in close cooperation with project controls team.</li> <li>Set up and regularly maintain a project dashboard in close cooperation with project controls team.</li> <li>Monitor with support of the project controls team cost aspects of the project within direct control to forecast final costs, trends, and take action to avoid cost overruns.</li> <li>Evaluate earned value / value of work for project completion with support of the project controls team.</li> <li>Build and maintain a healthy relationship with clients and act as project focal point for the client.</li> <li>Proactively resolve scope and schedule issues with the third-party contractor as they arise.</li> <li>Know the contract between the FEED- or EPC-contractor and between the client and third-party contracts.</li> <li>Know the PMC contract between KBR and the client.</li> <li>Ensure change order recording and participation from project team in technical parts of change order assessment.</li> <li>Regularly provide input to project reports to internal project management and the clients.</li> <li>Assess and provide feedback on third-party contractor’s project reports.</li> <li>Define and communicate team’s priorities such as achievement of milestones and other key project objectives.</li> <li>Listen to the team, discuss the issues, resolve problems, and direct activities to remove roadblocks and achieve objectives.</li> <li>Effective communication with the design and engineering teams (inside PMC and third parties) and other project stakeholders like operations, maintenance, etc.</li> <li>Regularly chair and record project team meetings within the PMC organisation and with the client and with the third-party contractors or consultants.</li> <li>Responsible for preparation and status tracking of all projects related correspondence and transmittals / project documents.</li> <li>Perform together with relevant discipline engineers technical bid evaluations (TBE) and award recommendations.</li> <li>Participate or delegate participation of discipline engineers in factory and site acceptance tests.</li> </ul> <h4>Qualifications including required education, experience, & skills</h4> <ul> <li>B. Sc. Eng from an accredited college or university.</li> <li>Minimum 15 years post-graduation total experience.</li> <li>Minimum 10 years experience post qualification in infrastructure, buildings projects.</li> <li>Minimum 5 years of experience in a senior project engineer / project manager role.</li> <li>Must have demonstrated ability of effective functioning in a multi-cultural environment, preferably in the Middle East.</li> </ul> <h4>Essential skills / experience</h4> <ul> <li>Project planning and execution.</li> <li>Multidisciplinary design coordination.</li> <li>Commercial and contract awareness.</li> <li>Construction and commissioning management.</li> <li>Stakeholder engagement and client management.</li> <li>Problem-solving and decision-making.</li> <li>Strong written and verbal communication skills.</li> <li>Presentation and reporting skills.</li> <li>Leadership and team coordination.</li> <li>Risk management and change control.</li> <li>Proficiency with project management and BIM platforms.</li> <li>Analysis and problem solving.</li> <li>Creativity / innovation.</li> <li>Communications, written and oral.</li> <li>Ability to influence and persuade.</li> <li>Decarbonization – energy transition – sustainability.</li> </ul> <p><strong>Belong. Connect. Grow. with KBR!</strong></p></p><p></p>

<p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p><p>The Assistant Site Manager supports the Site Manager in overseeing daily operations and compliance for Civil Engineer (CE) maintenance activities under the AFCAP V contract. This role provides supervisory and administrative support to ensure mission-critical facility systems including HVAC, fire suppression, water treatment, and building automation are maintained in accordance with Air Force CE standards, DoD requirements, and contractual obligations. The Assistant Site Manager acts as a deputy leader, ensuring continuity of operations, quality assurance, and effective communication with government stakeholders and contractor personnel.</p><p>Responsibilities</p><ul><li>Assist the Site Manager in directing and supervising site personnel and subcontractors.</li><li>Oversee contract operations in the absence of the Site Manager with full delegated authority.</li><li>Provide daily oversight to craft leads and technicians as assigned.</li><li>Help ensure all work is executed in accordance with PWS requirements, Air Force standards, and AFCAP contract obligations.</li><li>Interact with base CE personnel, tenants, and CORs to resolve issues and coordinate maintenance requirements.</li><li>Act as the primary point of contact for the ACO, COR, and Government personnel in the Site Manager's absence, with the ability to meet on-site within 4 hours as required.</li><li>Provide regular updates on site activities to Task Order Manager, Program Manager, and Government representatives as needed.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have a High School diploma or equivalent, Associate or Bachelor Degree preferred.</li><li>Must be able to receive and maintain a valid visa14 or 18 for Kuwait.</li><li>Must have a current, valid U. S. Passport and U. S. Driver's License.</li><li>Must have and maintain a valid U. S. SECRET Security Clearance prior to deployment.</li><li>Must be able to read, write, speak and understand English fluently.</li><li>Must be able to pass employment and deployment qualification requirements that include psychological, medical, dental, drug testing, background checks, etc.</li><li>Candidates must successfully complete both online and hands on CBRN (chemical, biological, radiological and nuclear) defense training. Training includes the successful fit testing of DoD provided protective gear.</li><li>A minimum of 6 years of experience in facilities operations,maintenance, or military contracting.</li><li>Strong organizational and analytical skills.</li><li>Ability to manage multiple functional responsibilities simultaneously.</li><li>Able and willing to work periods of long hours to meet mission requirements</li><li>Military experience in a contingency environment and knowledge and experience working with government contracts preferred.</li></ul>

<p><h4>Energy Jobline Overview</h4> <p>Energy Jobline is the largest and fastest growing global energy job board and energy hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.</p> <p>We focus on the oil & gas, renewables, engineering, power, and nuclear markets as well as emerging technologies in EV, battery, and fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.</p> <h4>Job Summary</h4> <p>We are seeking a highly experienced network engineer to be based in Kuwait on a contract hire basis. The successful candidate will be responsible for the design, deployment, optimization, and administration of high performance, low latency enterprise networks in a complex, mixed vendor environment. This role requires deep hands-on expertise in advanced routing technologies and enterprise scale network infrastructure.</p> <h4>Key Responsibilities</h4> <li>Design, deploy, and maintain high performance, low latency enterprise network infrastructures</li> <li>Lead network architecture design for complex, multisite environments</li> <li>Implement and troubleshoot advanced routing protocols in mixed environments: <br>OSPF <br>BGP <br>ISIS </li> <li>Perform network optimization, capacity planning, and performance tuning</li> <li>Ensure high availability, resilience, and security of network services</li> <li>Diagnose and resolve complex network issues at L2/L3 levels</li> <li>Collaborate with infrastructure, security, and application teams during project delivery</li> <li>Produce and maintain detailed network documentation, diagrams, and standards</li> <li>Support network migrations, upgrades, and technology refresh initiatives</li> <li>Provide technical guidance and mentorship to junior engineers where required</li> <li>Ensure compliance with enterprise IT policies, standards, and best practices</li> <h4>Mandatory Requirements (Must Have)</h4> <p><strong>Experience</strong></p> <li>Minimum 10+ years of hands-on experience in network administration and engineering</li> <li>Proven experience designing and deploying enterprise scale, high performance networks</li> <p><strong>Education</strong></p> <p>Bachelor’s degree in one of the following fields:</p> <li>Information technology</li> <li>Information systems</li> <li>Computer science</li> <li>Communications engineering</li> <li>Or a closely related discipline</li> <p><strong>Certifications</strong></p> <li>Valid CCIE Enterprise Infrastructure certification (mandatory)</li> <p><strong>Technical Expertise</strong></p> <li>Strong, hands-on knowledge of: <br>Advanced routing protocols: OSPF, BGP, ISIS </li> <li>Enterprise routing and switching environments</li> <li>Network performance optimization and low latency design principles</li> <li>Experience working in mixed vendor network environments</li> <h4>Nice to Have (Advantageous)</h4> <li>Experience in service provider or large enterprise environments</li> <li>Exposure to data center networking and high availability architectures</li> <li>Knowledge of network security concepts and integration with security platforms</li> <li>Experience supporting mission critical or 24/7 operational networks</li> <li>Prior experience working in the Middle East region</li> <h4>Soft Skills & Competencies</h4> <li>Strong analytical and troubleshooting skills</li> <li>Ability to work independently in a contract based role</li> <li>Excellent documentation and communication skills</li> <li>Proactive, detail oriented, and solution focused mindset</li> <li>Ability to perform under pressure in complex operational environments</li></p><p></p>

<p><h4>Principal accountabilities</h4> <p>Typical duties include the following, although specific duties vary by assignment or contract.</p> <ul> <li>Supervises the total construction effort to ensure the project is constructed in accordance with the design, budget and schedule.</li> <li>Ensures construction adheres to construction specifications.</li> <li>Reads, interprets, and deciphers all construction documents (schedules, specifications, blueprints, schematics, diagrams, etc.). Provides technical assistance and interpretation of drawings, recommending construction methods and equipment as required.</li> <li>Logs, references, distributes, and files all related correspondence, drawings, and documents.</li> <li>Plans, coordinates, and supervises on-site functions (scheduling, material control, and day-to-day direction of on-site administrative staff, when assigned).</li> <li>Ensures all project staff and subcontractors employed to execute engineering-construction tasks conform to applicable work rules and standard operating procedures for security, safety, environmental controls, hazardous materials and underground utilities.</li> <li>Visits construction sites and submits required construction reports to monitor progress against schedule and timelines.</li> <li>Cooperates with visiting government and department of defense personnel conducting official inspection visits and surveys and participates in their briefing or orientation.</li> <li>Provides leadership, mentoring, and professional development to assigned staff.</li> <li>Manages the work of teams to procure and construct work.</li> <li>Leads, manages and mentors the assigned technical and professional staff responsible for the facilities construction from contract development through construction completion.</li> <li>Attends meetings as required including design and construction reviews and construction kickoff meetings.</li> <li>Performs other qualified duties as assigned.</li> </ul> <h4>Knowledge & skills</h4> <ul> <li>Knowledge of cost controls, contractual and project management of international construction projects.</li> <li>Shall also be versed in the International Building Code, NFPA fire codes and the NEC in addition to general construction practices.</li> <li>Knowledge of construction materials, processes, techniques, and methods.</li> <li>Thorough knowledge of the Federal Acquisition Regulation (FAR), Defense Federal Acquisition Regulations (DFAR) and related federal and state legislation and regulations.</li> <li>Knowledge of Service Contract Act and Truth in Negotiations Act.</li> <li>Knowledge of international business management and International Traffic in Arms Regulations (ITAR) if required for contract.</li> <li>Knowledge and understanding of the Foreign Corrupt Practices Act (FCPA).</li> <li>Knowledge of accounting practices including disclosed accounting practices.</li> <li>Effective leadership and interpersonal skills.</li> <li>Requires a thorough knowledge of practices, standards, and regulations as they apply to the design and construction of the regional camps, forward operating bases, and major civil projects.</li> <li>Excellent communication and organizational skills are essential.</li> <li>Able to use project and construction management planning and reporting tools such as Microsoft Project and Primavera.</li> </ul> <h4>Experience & education</h4> <ul> <li>High school diploma or equivalent.</li> <li>Bachelor’s degree in engineering, construction technology, or construction management (preferred).</li> <li>Must be able to obtain and maintain a secret clearance; note US citizenship is required to obtain a secret clearance.</li> <li>Minimum seven years of construction field experience in all phases of civil and building construction or a two-year associate degree in construction management or related field and five years of field experience.</li> <li>Experience with mechanical projects (HVAC, plumbing) and electrical projects.</li> <li>Experience in civil and structural projects and hold an American Concrete Institute (ACI) concrete testing certification.</li> <li>Construction inspector shall also be versed in the International Building Code (IBC), NFPA fire codes, British Standard (BS) electrical code, and the National Electric Code (NEC) in addition to general construction practices.</li> <li>Must be able to read, interpret, and decipher all construction documents (schedules, specifications, blueprints, schematics, diagrams, and related documents); analyze procedures to identify deficiencies, review time and cost estimates, monitor project phasing and ensure adherence to approved safety standards, observe and inspect ongoing construction work, oversee construction record keeping activities, recommend payments to contractors, recommend change orders, review proposed change orders submitted by construction contractors, prepare and submit reports, and keep a daily log of all activities, weather conditions and work quantities.</li> <li>An Engineer in Training (EIT) or professional certification/project management certification is desired.</li> <li>Additional knowledge and skills may be required by contract or assignment.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Works in a normal office environment with controlled temperature and lighting conditions.</li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> </ul> <h4>Other responsibilities</h4> <p><strong>Safety</strong> - The company enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the quality policy and carry out job activities in compliance with applicable quality system documents and customer contracts. Each employee must read and understand his or her quality management and customer satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to the job.</p></p><p></p>

<ul><li><p>Owns test strategy, BDD framework, automation coverage targets, and QA team co-management.</p></li><li><p>Lead the QA automation testing function, ensuring efficiency, reliability, and scalable automated testing across software applications.</p></li><li><p>Define and implement automation testing strategies, frameworks, standards, and best practices aligned with the software delivery lifecycle.</p></li><li><p>Design, develop, and maintain automated test scripts for functional, regression, API, integration, and end-to-end testing.</p></li><li><p>Select and implement appropriate automation tools and frameworks to improve test coverage, execution speed, and quality assurance effectiveness.</p></li><li><p>Integrate automated testing into CI/CD pipelines to support continuous testing and faster software releases.</p></li><li><p>Review requirements, user stories, and technical specifications to create comprehensive test scenarios and automation plans.</p></li><li><p>Manage automated test execution, analyze results, identify defects, and collaborate with development teams for resolution.</p></li><li><p>Maintain automation frameworks, improve test stability, and reduce manual testing efforts through continuous optimization.</p></li><li><p>Establish QA automation metrics, reporting dashboards, and quality indicators to track testing effectiveness.</p></li><li><p>Support defect management, root cause analysis, and production issue validation.</p></li><li><p>Provide technical guidance, coaching, and mentoring to QA automation engineers.</p></li><li><p>Ensure adherence to testing standards, quality processes, and organizational governance requirements. </p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in computer science, Software Engineering, Information Technology, Computer Engineering, or a related field.</p></li><li><p>ISTQB Certified Tester (Foundation Level / Advanced Test Automation Engineer)</p></li><li><p>Certified Selenium Tester or equivalent automation framework certification</p></li><li><p>Certified Agile Tester (CAT)</p></li><li><p>Kuwait / Transferable </p></li></ul>

<p><h4>About us</h4> <p>Zaleej Real Estate Co. is the Kuwait real estate company that manages a diversified portfolio of commercial and residential properties across Kuwait, combining institutional-grade asset management with hands-on operational excellence.</p> <h4>Role overview</h4> <p>The Property Manager assumes full ownership of the day-to-day operations of Zaleej’s Kuwait portfolio, covering both commercial and residential assets. This role exists to protect and enhance asset value, maintain high occupancy, and deliver a seamless tenant experience — while driving process improvements and accurate reporting through YARDI. Success in the first 12 months looks like a measurable improvement in portfolio occupancy, fully embedded YARDI workflows, and a property management team operating with clear SOPs and accountability. The role sits within the Property Management department and works closely with leasing, finance, and facilities functions.</p> <h4>Key responsibilities</h4> <ul> <li>Oversee the full property management cycle for a portfolio of commercial and residential assets in Kuwait, ensuring occupancy targets, rent collection, and service quality benchmarks are consistently met.</li> <li>Lead, supervise, and develop regional property administrators; establish clear performance standards and serve as operational backup when required.</li> <li>Design and implement standardized property management processes and SOPs to improve efficiency, with a focus on embedding and optimizing the YARDI system across all workflows.</li> <li>Manage the end-to-end leasing cycle — including tenant sourcing, lease negotiation, renewals, statutory compliance checks, and marketing coordination — to minimize void periods.</li> <li>Monitor all vendor and service contracts for compliance, cost control, and performance; coordinate planned and reactive maintenance within approved budgets and SLAs.</li> <li>Prepare and present accurate monthly portfolio performance reports covering occupancy, rental income, arrears, maintenance expenditure, and market trends.</li> <li>Analyze market conditions and competitor activity in the Kuwait real estate market; recommend pricing adjustments, capital improvements, or repositioning strategies.</li> <li>Act as the primary liaison between tenants and management for property-related issues, ensuring prompt resolution and high tenant satisfaction and retention.</li> <li>Secure management approvals on capital and operational expenditure, maintaining full documentation and audit trails.</li> <li>Respond to after-hours property emergencies, coordinating contractors and communicating resolutions to stakeholders.</li> </ul> <h4>Requirements</h4> <p><strong>Essential (must-have)</strong></p> <ul> <li>Bachelor’s degree in Business Administration, Real Estate, Property Management, or a related discipline.</li> <li>Minimum 5 years’ hands-on experience in property and leasing management within the Kuwait market, covering both commercial and residential assets.</li> <li>Demonstrated proficiency with YARDI (or equivalent property management software) and Microsoft 365.</li> <li>Bilingual fluency in English and Arabic (written and spoken) — essential for tenant relations, regulatory filings, and internal reporting.</li> <li>Strong financial literacy: ability to prepare budgets, analyse rent rolls, track variances, and report clearly to management.</li> <li>Thorough knowledge of Kuwait property management regulations, Ministry of Justice lease registration, and municipality compliance requirements.</li> <li>Valid Kuwait driving license and transferable Article 18 residency visa.</li> </ul> <p><strong>Preferred (nice-to-have)</strong></p> <ul> <li>Exposure to GCC, US, or European real estate markets in addition to Kuwait.</li> <li>Background in project management methodology or a relevant certification (e.g. PMP, PRINCE2).</li> <li>Experience with financial analysis at the property or portfolio level.</li> <li>Familiarity with customer service best practices and facilities coordination.</li> <li>Established network of government and industry contacts in Kuwait.</li> </ul> <h4>Benefits</h4> <p><strong>What we offer</strong></p> <ul> <li>Opportunity to manage a diversified and growing portfolio within a principal-led, long-term investment group.</li> <li>Direct exposure to senior leadership and real influence over portfolio strategy and operational standards.</li> <li>A collaborative, entrepreneurial environment that values initiative, integrity, and continuous improvement.</li> </ul></p><p></p>

<p>POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.</p><p><strong>Desired Candidate Profile</strong></p><h2>PREFERRED QUALIFICATIONS</h2><p>Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver s License</p><h2>REQUIRED QUALIFICATIONS</h2><p>Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements.</p>