Oil

<p><h4>Division / Project</h4> <p>KBR’s Sustainable Technology Solutions (STS) group is looking for a Lead Design Engineer I - Mechanical for a 5-year PMC contract for the supply of programme management services with Kuwait Oil Company. The contract serves to support KOC to achieve its objectives of reaching optimum capacity in its oilfields and enhancing its facilities by the most efficient and economical means available.</p> <p>The contract aims to provide project management, coordination, planning, design, engineering, construction management, contracting, procurement, project controls and other services for construction of new oil field facilities, upgrading of existing facilities, and transfer of technology.</p> <h4>Primary objectives</h4> <p>To ensure mechanical equipment design integrity whilst leading the mechanical equipment engineering group on specific projects.<br> To provide specialist rotating equipment input to conceptual studies, FEEDs and detailed design for oil and gas developments.</p> <h4>Responsibilities</h4> <ul> <li>Ensure that design is fully compliant with project specification and client, international and local standards.</li> <li>Preparation of specifications for, and evaluation of, rotating equipment packages.</li> <li>Perform engineering design as required.</li> <li>Duties will include conceptual design and specification of rotating and packaged equipment and review of EPC’s detailed designs, technical bid evaluation and vendor documentation.</li> <li>Allocate work to team members. Ensure that within assigned team, personnel work within their competencies and with appropriate supervision.</li> <li>Quality assurance – responsible for working within the provisions and guidelines of the quality assurance system.</li> <li>Safety – responsible for personal safety and safe working practices. Understand and follow OH&S procedures.</li> <li>Ensure that conceptual and detail design work is appropriate for the complexity of the construction tasks and achieving a good balance between design costs and implementation costs.</li> <li>Evidence of feedback from supervisors and/or superintendents that constructability issues are addressed adequately in design and that work packs contain sufficient detail with no unnecessary content.</li> <li>Conduct site investigations, prepare reports.</li> </ul> <h4>Mandatory requirements</h4> <ul> <li>Engineering degree in a relevant discipline</li> <li>15 years of total post graduation experience</li> <li>10 years mechanical design experience in the oil and gas environment</li> <li>5 years in the stated designation</li> <li>A minimum of 3 years in automation software</li> </ul> <h4>Essential skills / experience</h4> <ul> <li>Hands on experience with large gas turbine driven compressors, pumps, generators packages is mandatory. Experience of other packaged equipment is desirable.</li> <li>Experience with the development of layouts for new facilities</li> <li>Experienced in the specification for, evaluation of and documentation for rotating equipment packages in a PMC environment would be advantageous.</li> <li>Ability to work in accordance with broad technical guidelines and with minimal supervision.</li> <li>Ability to work on multiple assignments to tight deadlines and prioritization of work to achieve them.</li> </ul> <p><strong>Decarbonization – Energy Transition – Sustainability</strong></p> <p><strong>Belong. Connect. Grow. with KBR!</strong></p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Role:</b></p><p>We are seeking an experienced <b>Manager – Cementing Laboratory</b> to lead our cementing laboratory operations and provide technical expertise in support of cementing projects within the oil and gas industry. The successful candidate will oversee laboratory testing, cement job simulations, quality assurance, technical support, and continuous process improvement while ensuring compliance with industry standards and company HSE requirements.</p><p><br></p><p><b>Key Responsibilities:</b></p><ul><li>Lead and manage all cementing laboratory operations.</li><li>Design and perform cement job simulations, including pre- and post-job analysis.</li><li>Conduct laboratory testing of cement slurries and evaluate properties such as rheology, fluid loss, thickening time, and compressive strength.</li><li>Develop and optimize cementing formulations for primary and remedial cementing operations.</li><li>Provide technical support to Engineering, Operations, Sales, and Business Development teams.</li><li>Troubleshoot cementing challenges and recommend technical solutions.</li><li>Ensure laboratory equipment is properly maintained, calibrated, and operating efficiently.</li><li>Maintain quality standards, laboratory documentation, SOPs, and testing procedures.</li><li>Prepare technical reports, case studies, and presentations for internal and external stakeholders.</li><li>Support client requirements through technical consultation and job design.</li><li>Lead, mentor, and develop laboratory personnel while promoting a strong safety culture.</li><li>Ensure compliance with company QHSE policies and industry best practices.</li><li>Support digitalization initiatives and continuous improvement within laboratory operations.</li></ul><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Qualifications:</b></p><ul><li>Bachelor's degree in Engineering, Chemistry, or a related technical discipline.</li><li>Master's degree is an advantage.</li></ul><p><b>Experience</b></p><ul><li>12–15 years of experience in cementing laboratory operations within the oil &amp; gas industry.</li><li>Proven experience in cement slurry design, laboratory testing, and cementing job simulations.</li><li>Previous leadership or supervisory experience managing laboratory teams.</li><li>Strong understanding of API standards and cementing best practices.</li></ul><p><b>Skills &amp; Competencies</b></p><ul><li>Strong technical knowledge of cementing materials, additives, and laboratory testing.</li><li>Experience with cementing software and job design programs.</li><li>Excellent analytical and troubleshooting skills.</li><li>Strong leadership, communication, and stakeholder management abilities.</li><li>Ability to manage multiple projects in a fast-paced environment.</li><li>Commitment to quality, operational excellence, and HSE compliance.</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Scope of Job:</b></p><p>The Information Technology Specialist is responsible for maintaining, supporting, and improving the organization's IT infrastructure, systems, and services to ensure reliable and secure operations.</p><p><br></p><p><b>Principal Duties and Responsibilities:</b></p><ul><li>Install, configure, and maintain hardware and software systems. </li><li>Monitor and manage servers, networks, and cloud environments. </li><li>Troubleshoot and resolve technical issues. </li><li>Provide user support and technical assistance. </li><li>Implement and maintain cybersecurity controls. </li><li>Perform system upgrades, patches, and backups. </li><li>Maintain technical documentation and procedures. </li><li>Coordinate with vendors and service providers.</li><li>Ensure compliance with IT policies and standards.</li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Minimum 5–8 years of hands-on IT experience. </li><li>Experience in system administration, networking, technical support, cybersecurity, or cloud technologies. </li><li>Oil and Gas experience.</li><li>Kuwait based /transferable visa</li></ul></div>

<p>Position Title: Corporate HSE Manager Employment Type: Full Time Salary: up to 30,000 AED depending on experience and qualifications plus transportation, accommodation & meal Job Location: Kuwait About the Client: A highly trusted EPC team in Kuwait, with proven records of successful piping projects within the Middle East region. Job Description: • Lead and manage plant piping construction activities for large-scale Oil & Gas EPC projects. • Oversee project execution, planning, manpower, subcontractors, and quality of resource allocation of projects across the UAE, KSA, and Kuwait. • Ensure compliance with client specifications, HSE requirements, QA/QC standards, and contractual obligations throughout the project lifecycle. • Coordinate with engineering, procurement, planning, QA/QC, and client teams to achieve project milestones, budget, up to completion.</p><p>• Bachelor's Degree in Engineering (B. Tech or equivalent). • Minimum 15 yrs of HSE experience with at least 10 years in senior HSE leadership within the Oil & Gas/EPC construction industry. • Strong knowledge of ISO 45001, ISO 14001, OSHA, HSE audits, risk assessments, incident investigations, and regulatory compliance. With NEBOSH IGC or NEBOSH Diploma (mandatory). • Proven experience managing multiple HSE teams and projects across different countries/regions.</p>

<p>Position Title: Corporate HSE Manager Employment Type: Full Time Salary: up to 30,000 AED depending on experience and qualifications plus transportation, accommodation & meal Job Location: Kuwait About the Client: A highly trusted EPC team in Kuwait, with proven records of successful piping projects within the Middle East region. Job Description: • Lead and manage plant piping construction activities for large-scale Oil & Gas EPC projects. • Oversee project execution, planning, manpower, subcontractors, and quality of resource allocation of projects across the UAE, KSA, and Kuwait. • Ensure compliance with client specifications, HSE requirements, QA/QC standards, and contractual obligations throughout the project lifecycle. • Coordinate with engineering, procurement, planning, QA/QC, and client teams to achieve project milestones, budget , up to completion.</p><p>• Bachelor's Degree in Engineering (B. Tech or equivalent). • Minimum 15 yrs of HSE experience with at least 10 years in senior HSE leadership within the Oil & Gas/EPC construction industry. • Strong knowledge of ISO 45001, ISO 14001, OSHA, HSE audits, risk assessments, incident investigations, and regulatory compliance. With NEBOSH IGC or NEBOSH Diploma (mandatory). • Proven experience managing multiple HSE teams and projects across different countries/regions.</p>

<p>Position Title: Corporate HSE Manager Employment Type: Full Time Salary: up to 2,550 KWD depending on experience and qualifications plus transportation, accommodation & meal Job Location: Kuwait About the Client: A highly trusted EPC team in Kuwait, with proven records of successful piping projects within the Middle East region. Job Description: • Lead and manage plant piping construction activities for large-scale Oil & Gas EPC projects. • Oversee project execution, planning, manpower, subcontractors, and quality of resource allocation of projects across the UAE, KSA, and Kuwait. • Ensure compliance with client specifications, HSE requirements, QA/QC standards, and contractual obligations throughout the project lifecycle. • Coordinate with engineering, procurement, planning, QA/QC, and client teams to achieve project milestones, budget , up to completion.</p><p>• Bachelor's Degree in Engineering (B. Tech or equivalent). • Minimum 15 yrs of HSE experience with at least 10 years in senior HSE leadership within the Oil & Gas/EPC construction industry. • Strong knowledge of ISO 45001, ISO 14001, OSHA, HSE audits, risk assessments, incident investigations, and regulatory compliance. With NEBOSH IGC or NEBOSH Diploma (mandatory). • Proven experience managing multiple HSE teams and projects across different countries/regions.</p>

<p>Position Title: Corporate HSE Manager Employment Type: Full Time Salary: up to 30,000 AED depending on experience and qualifications plus transportation, accommodation & meal Job Location: Kuwait About the Client: A highly trusted EPC team in Kuwait, with proven records of successful piping projects within the Middle East region. Job Description: • Lead and manage plant piping construction activities for large-scale Oil & Gas EPC projects. • Oversee project execution, planning, manpower, subcontractors, and quality of resource allocation of projects across the UAE, KSA, and Kuwait. • Ensure compliance with client specifications, HSE requirements, QA/QC standards, and contractual obligations throughout the project lifecycle. • Coordinate with engineering, procurement, planning, QA/QC, and client teams to achieve project milestones, budget, up to completion.</p><p>• Bachelor's Degree in Engineering (B. Tech or equivalent). • Minimum 15 yrs of HSE experience with at least 10 years in senior HSE leadership within the Oil & Gas/EPC construction industry. • Strong knowledge of ISO 45001, ISO 14001, OSHA, HSE audits, risk assessments, incident investigations, and regulatory compliance. With NEBOSH IGC or NEBOSH Diploma (mandatory). • Proven experience managing multiple HSE teams and projects across different countries/regions.</p>

<p>Position Title: Corporate HSE Manager Employment Type: Full Time Salary: up to 2,550 KWD depending on experience and qualifications plus transportation, accommodation & meal Job Location: Kuwait About the Client: A highly trusted EPC team in Kuwait, with proven records of successful piping projects within the Middle East region. Job Description: • Lead and manage plant piping construction activities for large-scale Oil & Gas EPC projects. • Oversee project execution, planning, manpower, subcontractors, and quality of resource allocation of projects across the UAE, KSA, and Kuwait. • Ensure compliance with client specifications, HSE requirements, QA/QC standards, and contractual obligations throughout the project lifecycle. • Coordinate with engineering, procurement, planning, QA/QC, and client teams to achieve project milestones, budget , up to completion.</p><p>• Bachelor's Degree in Engineering (B. Tech or equivalent). • Minimum 15 yrs of HSE experience with at least 10 years in senior HSE leadership within the Oil & Gas/EPC construction industry. • Strong knowledge of ISO 45001, ISO 14001, OSHA, HSE audits, risk assessments, incident investigations, and regulatory compliance. With NEBOSH IGC or NEBOSH Diploma (mandatory). • Proven experience managing multiple HSE teams and projects across different countries/regions.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Provide independent technical oversight of, and influence over, EPCC engineering workflows and deliverables quality to ensure their fitness for purpose.</p></li><li><p>Acts as the SF manager’s technical guardian across engineering deliverables, without duplicating EPCC design authority.</p></li><li><p>Review EPCC engineering deliverables and identify problems</p></li><li><p>Ensure compliance with client standards, project basis, and specs</p></li><li><p>Track engineering maturity, deliverable quality, and technical risk</p></li><li><p>Harmonize SF technical interfaces across disciplines</p></li><li><p>Advise on deviations, concessions, and technical risk exposure</p></li><li><p>Ensure readiness of documents for client approval cycles</p></li><li><p>Monitor and manage engineering MOC</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Holds a bachelor's degree in mechanical engineering or relevant</p></li><li><p>15+ years oil &amp; gas facilities engineering</p></li><li><p>Core discipline: piping, mechanical, or process</p></li><li><p>Broad multi-discipline understanding (E&amp;I, civils, layout)</p></li><li><p>High familiarity with EPC deliverables lifecycles</p></li><li><p>Experience with client approvals, Master Document List, and assurance</p></li><li><p>Good judgement; able to challenge without re-engineering</p></li><li><p>Good technical questioning ability to unearth and foresee problems</p></li><li><p>Kuwait based/ transferable visa</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Scope of Job:</b></p><p>The Technology Advisor provides expert guidance on technology strategy, innovation, and digital transformation initiatives. The role ensures that technology investments and solutions align with organizational objectives and industry best practices.</p><p><br></p><p><b>Principal Duties and Responsibilities:</b></p><ul><li>Develop and recommend technology strategies and roadmaps. </li><li>Advise management on technology trends, risks, and opportunities. </li><li>Evaluate emerging technologies and their business impact. </li><li>Support digital transformation and modernization initiatives. </li><li>Conduct technology assessments and feasibility studies. </li><li>Recommend IT governance and cybersecurity improvements. </li><li>Participate in technology procurement and vendor evaluations.</li><li>Prepare reports, presentations, and strategic recommendations for senior management.</li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Minimum 8–15 years of professional IT experience. </li><li>At least 3–5 years in technology strategy, digital transformation, enterprise architecture, or IT leadership roles. </li><li>Oil and Gas experience</li><li>Male Gender</li><li>Kuwait based / Transferable Visa</li></ul><p><br></p></div>

<p>Operate wireline equipment and perform rig-up and rig-down activities at well sites while safely transporting personnel, tools, and equipment to field locations. Support day-to-day wireline operations, conduct equipment inspections, and ensure compliance with HSE standards and company procedures. This role involves approximately 50% heavy vehicle driving and 50% wireline operator duties.</p><p><strong>Desired Candidate Profile</strong></p><p>Skills Valid heavy vehicle driving skills (Kuwait licence required) Wireline equipment operation Rig-up and rig-down experience Familiarity with Kuwait oilfield operations Strong commitment to health, safety, and quality standards Excellent teamwork, responsibility, and reliability Qualifications Valid Kuwait Heavy Driving Licence Minimum 1 year of experience in wireline operations and heavy vehicle driving Familiarity with Kuwait oilfield locations and operations Minimum High School Diploma or Diploma Must be currently based in Kuwait.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>About us</strong>&nbsp;</span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.&nbsp;</span></p><br><p><span><strong>Role Purpose</strong></span></p><br><p><span>You will lead civil and structural engineering delivery to ensure safe, high-quality, and cost-effective outcomes. You will be responsible for maintaining structural design integrity while guiding a multidisciplinary team to deliver projects successfully across their lifecycle.</span><span>This role requires proven experience in the Middle East and a strong background in Project Management Consultancy (PMC) environments.</span></p><br><p><span><strong>What You Will Do</strong></span></p><br><ul><li><span>Supervise civil/structural engineers.</span></li><li><span>Ensure the integrity of civil/structural design within the defined scope and maintain applicable standards.</span></li><li><span>Identify and implement civil/structural software required for the effective functioning of the civil/structural team.</span></li><li><span>Manage civil/structural engineering design and any design changes within budget and schedule.</span></li><li><span>Provide technical supervision to assigned civil/structural designers and draftsmen in the execution of their responsibilities.</span></li><li><span>Ensure compliance with Quality Assurance requirements and relevant guidelines applicable to the business unit.</span></li><li><span>Promote safe working practices and ensure adherence to OH&amp;S procedures.</span></li><li><span>Monitor and achieve cost and budget KPIs for design activities</span></li><li><span>Ensure the level of design is appropriate to the complexity of construction, maintaining a balance between design cost and implementation cost.</span></li><li><span>Ensure feedback from supervisors or superintendents confirms that constructability requirements are adequately addressed and that work packs contain sufficient and relevant detail.</span></li><li><span>Allocate design and drafting tasks to team members, ensuring work is carried out within competency levels and with appropriate supervision.</span></li><li><span>Act as Design Master Controller (DMC), managing civil/structural design documentation and drawings for the assigned asset in accordance with Worley procedures.</span></li><li><span>Conduct site investigations and prepare reports.</span></li></ul> <p><span><strong>What You Will Bring</strong></span></p><br><p><span><strong>Experience &amp; Capability</strong></span></p><br><ul><li><span>Extensive experience in civil and civil/structural engineering within oil &amp; gas, refinery, or petrochemical projects.</span></li><li><span>Demonstrated experience working in the Middle East project environment.</span></li><li><span>Strong background in PMC roles, including managing client-side expectations and multi-contractor interfaces.</span></li><li><span>Proven ability to lead engineering teams and deliver complex projects.</span></li><li><span>Strong understanding of design, drafting, and engineering processes across 2D and 3D environments.</span></li><li><span>Experience managing design budgets, schedules, and performance metrics.</span></li><li><span>Hands-on experience with industry-standard civil/structural engineering and design software.</span></li></ul><p><span><strong>Qualifications</strong></span></p><br><ul><li><span>Full-time Bachelor’s Degree in Civil or Structural Engineering from an accredited university.&nbsp;</span></li><li><span>Atleast 15 years of total experience post graduate studies.</span></li><li><span>Atleast 10 years in the oil &amp; gas / petrochemical / refinery industry.</span></li><li><span>Atleast last 5 years in a similar leadership or specialist role.</span></li><li><span>Previous experience working with a contractor or in a comparable delivery model.</span></li></ul><p><span><strong>Why This Role Matters</strong></span></p><br><ul><li><span>You will play a key role in delivering safe, sustainable infrastructure by leading a high-performing team and ensuring engineering excellence across all phases of the project. Your regional experience and PMC background will be critical in navigating project complexity and delivering value to our clients.</span></li></ul><p><span><strong>Moving forward together</strong></span></p><br><p><span>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</span></p><br><p><span>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</span></p><br><p><span>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</span></p><br> </div>

<p>Burgan Drilling Company is expanding its operations and is seeking experienced and motivated professionals to join our drilling teams. We are currently recruiting for the following positions:</p><p><strong>Senior Drilling Crew:</strong></p><ul><li>Rig Manager/ Sr. Tool Pusher</li><li>Night Tool Pusher</li><li>Driller</li><li>Assistant Driller</li><li>Chief Electrician</li><li>Chief Mechanic</li><li>Safety Officer</li></ul><p><strong>Junior Drilling Crew:</strong></p><ul><li>Derrickman</li><li>Floorman</li><li>Assistant Electrician</li><li>Assistant Mechanic</li></ul><p>Minimum Requirements:</p><ul><li>Relevant experience in Oil &amp; Gas specifically in deep drilling operations.</li><li>Experience in land drilling rigs is a MUST (3000HP &amp; above).</li><li>Looking for candidates with Intelligent, Pro-Active and proper planning skills.</li><li>Valid IWCF or IADC Well Control Certification for senior drilling crews (Supervisory Level / Driller Level Certificate as applicable)</li><li>Technical qualifications and trade certifications relevant to the position.</li><li>Good communication skills in English. (Reading &amp;Writing)</li><li>Medically fit and able to work in remote operational locations.</li><li>Strong commitment to safety and compliance with QHSE standards.</li></ul><p>Preferred Experience:</p><ul><li>Should have worked currently on 3000 HP or Minimum 2000HP Land Drilling Rigs.</li><li>Previous experience with International Drilling contractors is an advantage.</li><li>Middle East (GCC Countries) drilling experience is preferred.</li></ul><p>Interested candidates are invited to submit their updated CV, clearly indicating the position applied for with total years of drilling experience, rig types worked on, current location, availability with IWCF/Well Sharp Validity details.</p><p>Note: Only shortlisted candidates who meet the required qualifications and experience will be contacted.</p><p><strong>Desired Candidate Profile</strong></p><p><b>Minimum Requirements:</b></p><ul><li>Relevant experience in Oil &amp; Gas specifically in deep drilling operations.</li><li>Experience in land drilling rigs is a MUST (3000HP &amp; above).</li><li>Looking for candidates with Intelligent, Pro-Active and proper planning skills.</li><li>Valid IWCF or IADC Well Control Certification for senior drilling crews (Supervisory Level / Driller Level Certificate as applicable)</li><li>Technical qualifications and trade certifications relevant to the position.</li><li>Good communication skills in English. (Reading &amp;Writing)</li><li>Medically fit and able to work in remote operational locations.</li><li>Strong commitment to safety and compliance with QHSE standards.</li></ul><p>Preferred Experience:</p><ul><li>Should have worked currently on 3000 HP or Minimum 2000HP Land Drilling Rigs.</li><li>Previous experience with International Drilling contractors is an advantage.</li><li>Middle East (GCC Countries) drilling experience is preferred.</li></ul>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> <li>Highly desired to have a U.S. passport valid for an additional two years with at least two facing pairs (four total) of blank visa pages.</li> </ul> <h4>Compensation details</h4> <p>34.17</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a talented Process Engineer with upstream project experience in the oil and gas sector to join our dynamic team. In this pivotal role, you will be responsible for designing, implementing, and optimizing processes that enhance efficiency and effectiveness in our projects. Your expertise will directly contribute to our mission of delivering high-quality results while adhering to safety and environmental standards. This position offers a unique opportunity to work in a collaborative environment where innovation is encouraged and valued.</p><p>As a Process Engineer, you will engage with cross-functional teams, providing your insights to shape the future of our projects. We pride ourselves on fostering a culture of continuous improvement and professional development. You will have access to training programs and mentorship from industry leaders, allowing you to expand your skill set and advance your career. Our commitment to employee growth ensures that you will find ample opportunities to progress within the organization, taking on greater responsibilities as you prove your capabilities.</p><p>In this role, you will have the chance to make a strategic impact on our operations, influencing key decisions that drive project success. Your contributions will not only enhance our current projects but also help us innovate and explore new avenues in the oil and gas sector. Join us and be part of a forward-thinking company that values your input and strives for excellence in every endeavor.</p><p><b>Responsibilities:</b></p><ol><li>Develop and implement process designs for upstream oil and gas projects, utilizing simulation software to optimize production efficiency and reduce costs.</li><li>Conduct feasibility studies and process evaluations to identify areas for improvement, ensuring alignment with project goals and industry standards.</li><li>Collaborate with multidisciplinary teams to integrate process engineering solutions into project planning, ensuring seamless execution and adherence to timelines.</li><li>Monitor and analyze process performance data, using statistical tools to identify trends and recommend corrective actions when necessary.</li><li>Prepare technical documentation and reports for internal and external stakeholders, clearly communicating process designs and improvements.</li><li>Provide technical support during project execution, troubleshooting issues and implementing solutions to minimize downtime and enhance productivity.</li><li>Conduct risk assessments and develop safety protocols to ensure compliance with health, safety, and environmental regulations throughout project lifecycles.</li><li>Participate in project reviews and audits, providing insights and recommendations for continuous improvement and best practices.</li><li>Mentor junior engineers and interns, sharing knowledge and fostering a culture of learning and development within the team.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Strong analytical skills to evaluate complex process systems and identify optimization opportunities.</li><li>Proficiency in process simulation software such as Aspen HYSYS or similar tools.</li><li>Excellent communication skills for effective collaboration with cross-functional teams and stakeholders.</li><li>In-depth knowledge of industry standards and regulations related to oil and gas operations.</li><li>Ability to conduct feasibility studies and risk assessments to inform project decisions.</li><li>Experience in project management methodologies to ensure timely and successful project delivery.</li><li>Strong problem-solving skills to troubleshoot process-related issues and implement effective solutions.</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Job Summary:</b></p><p>The Contracts and Claims Manager will be responsible for managing the full contract lifecycle including claims administration to ensure company interests and support successful project delivery. Duties include contract review and management, claims preparation and evaluation, commercial negotiations, contractual correspondence, risk identification, and coordination with project teams, clients, and stakeholders. The role requires strong knowledge of contract administration, claims management, commercial practices, excellent negotiation and communication skills, attention to detail, and the ability to manage multiple projects within the construction, infrastructure, oil &amp; gas, and government sectors.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Qualifications:</b></p><ul><li>Bachelor’s Degree in Civil, Mechanical, Electrical Engineering or any related discipline</li><li>Minimum of 15 years of relevant experience in contract management, claims administration, and commercial management within the construction, infrastructure, oil &amp; gas, or government projects.</li><li>Proficient in contract lifecycle management, claims preparation and evaluation, contractual correspondence, commercial negotiations, dispute resolution, and administration of FIDIC and other international contract forms.</li><li>Strong knowledge of construction contracts, project delivery processes, contractual obligations, variations, extensions of time (EOT), and claims procedures.</li><li>Fluent in Arabic and English, with strong written and verbal communication skills.</li><li>Demonstrates strong negotiation, analytical, leadership, and stakeholder management skills, attention to detail, and the ability to manage complex contractual matters across multiple projects.</li><li>Must be available in Kuwait with valid transferrable visa</li></ul></div>

<p>Position Title: Corporate HSE Manager Employment Type: Full Time Salary: up to 30,000 AED depending on experience and qualifications plus transportation, accommodation & meal Job Location: Kuwait About the Client: A highly trusted EPC team in Kuwait, with proven records of successful piping projects within the Middle East region. Job Description: • Lead and manage plant piping construction activities for large-scale Oil & Gas EPC projects. • Oversee project execution, planning, manpower, subcontractors, and quality of resource allocation of projects across the UAE, KSA, and Kuwait. • Ensure compliance with client specifications, HSE requirements, QA/QC standards, and contractual obligations throughout the project lifecycle. • Coordinate with engineering, procurement, planning, QA/QC, and client teams to achieve project milestones, budget , up to completion.</p><p>• Bachelor's Degree in Engineering (B. Tech or equivalent). • Minimum 15 yrs of HSE experience with at least 10 years in senior HSE leadership within the Oil & Gas/EPC construction industry. • Strong knowledge of ISO 45001, ISO 14001, OSHA, HSE audits, risk assessments, incident investigations, and regulatory compliance. With NEBOSH IGC or NEBOSH Diploma (mandatory). • Proven experience managing multiple HSE teams and projects across different countries/regions.</p>

<p>Role &amp; Responsibilities We are seeking experienced Service Engineers, Senior Service Technicians, and Service Technicians for a leading Industrial Service Company in Kuwait specializing in compressed air systems. The candidate should have hands-on experience in maintenance, troubleshooting, overhaul, installation, commissioning, and repair of oil-injected rotary screw air compressors and compressed air dryers.</p><p>Compressor Brands Experience (Any One or More)</p><ul><li>Atlas Copco</li><li>Ingersoll Rand</li><li>Gardner Denver</li><li>Kaeser</li><li>Sullair</li><li>CompAir</li><li>ELGi</li><li>Chicago Pneumatic</li><li>Quincy</li><li>BOGE</li><li>Other internationally recognized industrial compressor brands</li></ul><p>Key Responsibilities</p><ul><li>Preventive and corrective maintenance of rotary screw air compressors.</li><li>Troubleshooting mechanical and electrical faults.</li><li>Major overhaul of compressor packages.</li><li>Airend inspection, repair, and replacement.</li><li>Bearing replacement and mechanical seal replacement.</li><li>Motor replacement and alignment.</li><li>Coupling alignment using dial indicators or laser alignment tools.</li><li>Maintenance of belt-drive and direct-drive compressor systems.</li><li>Oil system and cooling system servicing.</li><li>Replacement of oil separators, oil filters, and air filters.</li><li>Inlet valve, blowdown valve, minimum pressure valve, and thermostatic valve overhaul.</li><li>Solenoid valve troubleshooting and replacement.</li><li>Leak detection and repair.</li><li>Installation and commissioning of compressors after overhaul.</li><li>Performance testing and fault diagnosis.</li><li>Preparation of service reports and customer support documentation.</li></ul><p>Electrical Responsibilities</p><ul><li>Troubleshooting industrial electric motors.</li><li>Working knowledge of Star-Delta starters.</li><li>Experience with Soft Starters.</li><li>Experience with VFD/VSD drives.</li><li>Electrical control panel troubleshooting.</li><li>PLC and electronic compressor controller diagnostics.</li><li>Pressure and temperature sensor troubleshooting.</li><li>Reading and understanding electrical wiring diagrams.</li><li>Electrical fault diagnosis using multimeters and clamp meters.</li></ul><p>Air Dryer Experience</p><ul><li>Refrigerated Air Dryers.</li><li>Heatless Desiccant Dryers.</li><li>Heated Desiccant Dryers.</li><li>Automatic Condensate Drain Systems.</li><li>Air Filtration Systems.</li><li>Moisture Separators.</li><li>Dew Point Controllers.</li></ul><p>Tools Knowledge</p><p>Candidates should be familiar with :</p><ul><li>Dial Indicators</li><li>Laser Alignment Tools</li><li>Torque Wrenches</li><li>Bearing Pullers</li><li>Hydraulic Presses</li><li>Multimeters</li><li>Clamp Meters</li><li>Megger (Insulation Resistance Tester)</li><li>Pressure Gauges</li><li>Infrared Temperature Guns</li><li>Vibration Meters</li></ul><p>Other Requirements</p><ul><li>Good communication skills in English.</li><li>Ability to work independently at customer sites.</li><li>Strong troubleshooting skills.</li><li>Safety-conscious and team-oriented attitude.</li><li>Valid Passport preferred.</li><li>Ready to relocate to Kuwait.</li></ul><p><strong>Desired Candidate Profile</strong></p><h3>Preferred Candidate Profile</h3><p>Qualification</p><ul><li>ITI Mechanical / Electrical</li><li>Diploma in Mechanical Engineering</li><li>Diploma in Electrical Engineering</li><li>Equivalent Technical Qualification</li></ul><p>Experience</p><ul><li>3 to 15 years of relevant experience in industrial air compressor service and maintenance.</li><li>Hands-on field service experience is mandatory.</li><li>Experience in shutdowns, commissioning, and troubleshooting preferred.</li><li>Gulf experience will be an added advantage.</li></ul>

<p>Urgent Hiring – Project Engineer | Kuwait Engineers India Limited (EIL) is hiring experienced professionals for a client project based in Kuwait. • Location: Client Site, Kuwait Key Responsibilities: • Coordinate engineering and construction activities. • Monitor project progress, schedules, and deliverables. • Liaise with clients, contractors, and multidisciplinary teams. • Ensure compliance with project specifications, quality, HSE, and client requirements. • Prepare and review technical documentation and project reports. • Support project planning, execution, and close-out activities. Preferred Skills: • Strong project coordination and communication skills. • Knowledge of engineering standards and project management practices. • Ability to work in a multidisciplinary team environment. • Proficiency in MS Office and project documentation. Employment Type: • Client Site Deployment (Kuwait)</p><p> • Minimum 10 years of relevant experience • Educational background in Electrical, Instrumentation, Mechanical, Civil, or Chemical Engineering Experience: • Minimum 10 years of relevant experience in engineering projects. • Experience in project execution, coordination, construction, or maintenance is preferred. Educational Qualification: • Bachelor's Degree in Electrical, Instrumentation, Mechanical, Civil, or Chemical Engineering. Preferred Industry: • Oil & Gas / Petrochemical / Refinery / EPC / Industrial Projects</p>

<p>Urgent Hiring – Project Engineer | Kuwait Engineers India Limited (EIL) is hiring experienced professionals for a client project based in Kuwait. • Location: Client Site, Kuwait Key Responsibilities: • Coordinate engineering and construction activities. • Monitor project progress, schedules, and deliverables. • Liaise with clients, contractors, and multidisciplinary teams. • Ensure compliance with project specifications, quality, HSE, and client requirements. • Prepare and review technical documentation and project reports. • Support project planning, execution, and close-out activities. Preferred Skills: • Strong project coordination and communication skills. • Knowledge of engineering standards and project management practices. • Ability to work in a multidisciplinary team environment. • Proficiency in MS Office and project documentation. Employment Type: • Client Site Deployment (Kuwait)</p><p> • Minimum 10 years of relevant experience • Educational background in Electrical, Instrumentation, Mechanical, Civil, or Chemical Engineering Experience: • Minimum 10 years of relevant experience in engineering projects. • Experience in project execution, coordination, construction, or maintenance is preferred. Educational Qualification: • Bachelor's Degree in Electrical, Instrumentation, Mechanical, Civil, or Chemical Engineering. Preferred Industry: • Oil & Gas / Petrochemical / Refinery / EPC / Industrial Projects</p>