Solar Power Engineer Jobs in Kuwait

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description<br></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Mechanical Supervisor</b> in <b>Kuwait</b>. Our client is a reputed organization in the <b>Power Generation</b> sector seeking skilled and motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Supervise mechanical maintenance activities in a large-scale power plant.<br></li><li>Lead maintenance teams during planned and emergency shutdowns.<br></li><li>Inspect boilers, turbines, pumps, compressors, and rotating equipment.<br></li><li>Ensure preventive and corrective maintenance schedules are followed.<br></li><li>Coordinate with operations and engineering teams for plant reliability.<br></li><li>Ensure compliance with safety regulations and maintenance standards.<br></li><li>Prepare maintenance reports and documentation.<br></li><li>Guide technicians and ensure quality workmanship.<br></li></ul>Required Skills<br><ul><li>Mechanical maintenance of power plant equipment.<br></li><li>Preventive &amp; corrective maintenance planning.<br></li><li>Shutdown and turnaround maintenance.<br></li><li>Reading engineering drawings and technical manuals.<br></li><li>Team leadership with strong safety practices.<br></li></ul>Preferred Skills<br><ul><li>CMMS knowledge.<br></li><li>Root Cause Analysis (RCA).<br></li><li>Leadership in multicultural work environments.<br></li></ul>Work Experience Requirements<br><p>Candidates must possess a <b>minimum of 10 years</b> of experience in mechanical maintenance within a <b>large-scale power plant</b>. Experience supervising maintenance teams and handling critical plant equipment is essential.<br></p><br>Education<br><ul><li><b>Minimum:</b> Diploma in Mechanical Engineering<br></li><li><b>Preferred:</b> Bachelor's Degree in Mechanical Engineering<br></li><li><b>Additional:</b> Relevant maintenance or safety certifications<br></li></ul>Contact Number - 9786888866<br><br><br> </div>

<p><h4>Principal Accountabilities:</h4> <p>Performs design work for new construction, renovations and improvement projects for real property facilities.<br> Interprets and adapts traditional methods and approaches in developing design calculations, layouts, drawings, and specifications that support project objectives and standards.<br> Responsible for selected construction inspections, quality control and submittal reviews beyond the expertise of construction managers.<br> Develops cost estimates and time schedules. Reviews and analyzes preliminary and final designs, plans and specifications for technical efficiency and adequacy.<br> Prepares necessary correspondence, technical reports, contract documents, fact sheets and status reports and prepares final construction drawings suitable for obtaining qualified bids from contractors.<br> Monitors and/or manages projects for new construction, renovations and improvements to real property facilities, utilizing a professional knowledge of engineering.<br> Responsible for the correct and efficient execution of assigned work involving the installation, removal, inspection, maintenance and repair of all electrical systems, distribution systems and fixtures.<br> Supervises and coordinates activities of workers engaged in the assembly, installation and repair of electrical cables, systems power distribution systems, distribution panels, inspections, etc.<br> Secures the cooperation of other crafts/trades supervisors and instills within the assigned electrical staff the cooperative attitude necessary for working closely with other maintenance trade workers.<br> May at times be obligated to perform actual maintenance and repair work.<br> Complies with health, safety and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.<br> Performs other qualified duties as assigned.<br> Living and working conditions at the assignment location could be remote and uncomfortable.<br> Long hours, exposure to weather and hazardous conditions.<br> Personnel should be aware of moving on short notice and under adverse conditions.<br> Ability to travel domestically and internationally.</p> <h4>Minimum Requirements:</h4> <p>Must be a degreed electrical engineer (licensed electrical engineer is preferred).<br> Minimum four (4) years of design experience and be capable of complete design and investigative services including electric power distribution networks, power load determination, exterior electric, interior electric, fire alarm systems, and site lighting.<br> Should have experience in controls systems designs.<br> Must be proficient in AutoCAD 2012 or later and have experience with power system analysis software.<br> Must be able to obtain and maintain a Secret US Government Clearance. Note: US citizenship is required to obtain a Secret Clearance.</p> <h4>Preferred Qualifications:</h4> <p>Excellent communications, effective leadership and interpersonal skills.<br> Capable of complete design services including electric power distribution networks, power load determination, exterior electric, interior electric, and site lighting.<br> Working knowledge of design review, project mobilization, quality compliance, QA, safety, project controls, and capture management.<br> Proficient in AutoCAD 2009 or later, and use AutoCAD to create presentable and accurate facility and infrastructure plans for concept and statement of work requirements for project execution.<br> Computer literate; can use Microsoft Office and Project, etc.<br> Additional knowledge/skills may be required by contract or assignment.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Dpay Consultancy Service Pvt Ltd</b></p><p>Position Details:</p><p>Job Title: Microsoft Dynamics 365 CRM Technical Consultant</p><p>Role: Lead technical consultant</p><p>Experience: 912+ Years (10+ Preferred)</p><p>Employment Type: Contract (5 months may be extended)</p><p>Location: Kuwait City, Kuwait (On-site)</p><p>Positions: 2</p><p>We are looking for experienced Microsoft Dynamics 365 CRM Technical Consultants with expertise in Dynamics 365 CE, Project Operations, Dataverse, integrations, Azure services, and ERP Integrations (Preferred with Oracle), Dual-write, PPAC. The consultant must design, develop, customise, integrate, and support both cloud and onPrem.</p><p>Required Experience</p><p>Minimum 8 years in Microsoft Dynamics 365 CRM Technical Consultant with Project Operations.</p><p>Preferred 10+ years End-to-End Implementations</p><p>Technical Skills</p><ul><li>Dynamics 365 CRM, CE, Project Operations.</li><li>Dataverse, Model-driven Apps Power Platform solutions</li><li>ERP Integration (Dynamics 365 Finance/F&amp;O, SAP, Oracle, NetSuite)</li><li>C#, .NET, ASP.NET, JavaScript, TypeScript, HTML, CSS</li><li>Plugins, Custom Workflows, Business Rules, Ribbon Workbench</li><li>REST APIs, SOAP, JSON, XML, OData</li><li>Azure Functions, Logic Apps, Service Bus, APIM</li><li>Microsoft Graph API, OAuth 2.0, Webhooks</li><li>Dual-write</li><li>SQL Server, FetchXML, SSRS, Git, Azure DevOps</li></ul><p>Roles &amp; Responsibilities</p><ul><li>Develop and customise Dynamics 365 CRM.</li><li>Develop and customise Project Operations.</li><li>Build plugins, workflows, APIs, and integrations.</li><li>Integrate App with ERP systems.</li><li>Develop Power Automate flows.</li><li>Perform code reviews and troubleshooting.</li><li>Support deployments and documentation.</li><li>Collaborate with functional consultants and business users.</li><li>Lead the subordinates of the team.</li></ul><p>Preferred Certifications</p><p>Microsoft Certification</p><p>Education</p><p>Any degree.</p><p>Soft Skills</p><p>Excellent communication, analytical thinking, client-facing experience, teamwork, and problem- solving.</p><p><br></p><ul><li><br></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum 8 years in Microsoft Dynamics 365 CRM Technical Consultant with Project Operations.</li><li>Preferred 10+ years End-to-End Implementations</li><li>Technical Skills: Dynamics 365 CRM, CE, Project Operations, Dataverse, Model-driven Apps Power Platform solutions, ERP Integration (Dynamics 365 Finance/F&amp;O, SAP, Oracle, NetSuite), C#, .NET, ASP.NET, JavaScript, TypeScript, HTML, CSS, Plugins, Custom Workflows, Business Rules, Ribbon Workbench, REST APIs, SOAP, JSON, XML, OData, Azure Functions, Logic Apps, Service Bus, APIM, Microsoft Graph API, OAuth 2.0, Webhooks, Dual-write, SQL Server, FetchXML, SSRS, Git, Azure DevOps</li><li>Roles &amp; Responsibilities: Develop and customise Dynamics 365 CRM, Develop and customise Project Operations, Build plugins, workflows, APIs, and integrations, Integrate App with ERP systems, Develop Power Automate flows, Perform code reviews and troubleshooting, Support deployments and documentation, Collaborate with functional consultants and business users, Lead the subordinates of the team.</li><li>Preferred Certifications: Microsoft Certification</li><li>Education: Any degree.</li><li>Soft Skills: Excellent communication, analytical thinking, client-facing experience, teamwork, and problem-solving.</li><li>Candidate Preferences: Nationality: Indian, Gender: Any, Valid Passport, Excellent English communication, Immediate joiners preferred, Willingness to relocate to Kuwait.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing calibration procedures and required functional tests in support of the KAF 4790 manual series.</p><p>The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities include maintenance and serviceability procedures for subsystem components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of airframes and power plants engineering principles, techniques, and methods in the maintainability of existing equipment and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</p><p>Apply and provide a thorough working knowledge of airframes and power plant systems to include aircraft modification procedures and experience with specific airframe, hydraulic, engine, and propeller systems, systems integration, system/component failure analysis, inspection, repair, and testing of airframes and power plant systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. Performance abilities include performance of maintenance and servicing related aircraft components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation and incorporates applicable technical directives and bulletins. Troubleshoots and/or repairs malfunctions in the aircraft airframes and power plants systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J MRC/MIMs, to include performing calibration procedures and required functional tests. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. Performs applicable O and I level maintenance functions in support of In-Flight Refueling Systems and rebuild shop and Aircraft Tire &amp; Wheel rebuilding. Perform scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment, pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated airframes and power plants equipment systems. Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/ Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures When necessary, perform other duties and supervisory functions, critical to the function of the program and to assure compliance with the Performance Work Statement (PWS).</p><p>Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems.</p><p>Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required.</p><p>The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arm</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>EDUCATION and/or EXPERIENCE: Graduation from a standard four (4) year high school or equivalent (GED)</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description<br></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Instrument Supervisor</b> in <b>Kuwait</b>. Our client is a reputed organization in the <b>Power Plant / Energy</b> sector seeking skilled and motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Supervise instrumentation installation, maintenance and commissioning activities.<br></li><li>Lead preventive and corrective maintenance of plant instrumentation.<br></li><li>Monitor calibration of transmitters, gauges and control valves.<br></li><li>Coordinate with operations and maintenance teams for shutdown activities.<br></li><li>Diagnose and resolve instrumentation faults to minimise downtime.<br></li><li>Ensure compliance with safety standards and maintenance procedures.<br></li><li>Maintain maintenance records and technical documentation.<br></li><li>Guide and supervise instrumentation technicians.<br></li></ul>Required Skills<br><ul><li>Power Plant Instrumentation – Experience with large-scale power plant systems.<br></li><li>Instrument Calibration – Calibration of field instruments and transmitters.<br></li><li>PLC/DCS Systems – Monitoring and troubleshooting automation systems.<br></li><li>Preventive Maintenance – Planning and execution of maintenance schedules.<br></li><li>Team Leadership – Supervising instrumentation personnel.<br></li></ul>Preferred Skills<br><ul><li>Shutdown maintenance experience.<br></li><li>Root cause analysis.<br></li><li>SAP CMMS or maintenance management software.<br></li></ul>Work Experience Requirements<br><p>Candidates must possess a <b>minimum of 10 years of experience</b> in instrumentation maintenance within a <b>large-scale power plant</b> environment. Experience supervising instrumentation teams and handling plant maintenance activities is essential.<br></p><br>Education<br><ul><li><b>Minimum:</b> Diploma in Instrumentation &amp; Control (I&amp;C)<br></li><li><b>Preferred:</b> Bachelor's Degree in Instrumentation/Electrical Engineering<br></li><li><b>Additional:</b> Relevant industrial safety or instrumentation certifications<br></li></ul>Contact Number - 9786888866<br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Detailed Engineering of Electrical Substations including Design/ Layout of Substation Building &amp; Equipment, Floor Opening, Earthing, Cable Trays, SLD, Lighting &amp; Small Power System etc. Vendor drawing reviews of 400kV GIS, 132kV GIS, 300MVA, 400/132/33kV Power Transformer, Shunt Reactor, Fire Fighting system, Cables etc. Calculation for cables, Earthing, Lightning, Lighting, Cable Tray, DC UPS &amp; Heat Load Calculation etc. (Oil &amp; Gas and substations) Knowledge in Scheme review &amp; Power and control cable schedule. Experience in tender estimation. Experience in using ETAP software, AutoCAD &amp; DIALLUX Coordination with site team. Relay Setting Calculation.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>BE / B Tech in Electrical Engineer with minimum 5 years of exp. Experience in 400kV/300kV/132kV Substation Design &amp; Packaged Type Substation Design.</p><p></p></section>

<strong>Overview</strong> <br> <br> <p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p> <br> <strong>Responsibilities</strong> <br> <br> <p>The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities include maintenance and serviceability procedures for subsystem components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of airframes and power plants engineering principles, techniques, and methods in the maintainability of existing equipment and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</p> <p> </p> <p> <strong>Major Job Activities</strong> </p> <p> <strong>Description:</strong> </p> <p> </p> <p> Apply and provide a thorough working knowledge of airframes and power plant systems to include aircraft modification procedures and experience with specific airframe, hydraulic, engine, and propeller systems, systems integration, system/component failure analysis, inspection, repair, and testing of airframes and power plant systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems.</p> <p> </p> <p> Performance abilities include performance of maintenance and servicing related aircraft components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation and incorporates applicable technical directives and bulletins.</p> <p> Troubleshoots and/or repairs malfunctions in the aircraft airframes and power plants systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J MRC/MIMs, to include performing calibration procedures and required functional tests.</p> <p> </p> <p> Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs.</p> <p> </p> <p> Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components</p> <p> </p> <p> Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions.</p> <p> Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control.</p> <p> Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system.</p> <p> Performs applicable O and I level maintenance functions in support of In-Flight Refueling Systems and rebuild shop and Aircraft Tire &amp; Wheel rebuilding.</p> <p> Perform scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment, pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated airframes and power plants equipment systems.</p> <p> Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures.</p> <p> Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/</p> <p> Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures</p> <p> When necessary, perform other duties and supervisory functions, critical to the function of the program and to assure compliance with the Performance Work Statement (PWS).</p> <br> <strong>Qualifications</strong> <br> <br> <p> <strong>EDUCATION and/or EXPERIENCE:</strong> </p> <p>Graduation from a standard four (4) year high school or equivalent (GED)</p> <p> </p> <p>This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance.<br> </p> <p> </p> <p> <strong>Material &amp; Equipment Directly Used</strong> </p> <p> </p> <p>Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems.</p> <p> </p> <p><br></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsible for operating and maintaining power generation and aircraft arresting systems in accordance with the performance work statement. Operation and maintenance services inlude, but are not limited to: catapults, arresting gear, and associated mechanical, hydraulic, and control systems involved primarily in aircraft takeoff and landing operations. Duties include installing and maintaining visual landing aids; testing and maintaining launch and recovery equipment using electric and mechanical test equipment and hand tools; activating airfield arresting systems, such as crash barriers and cables, during emergency landing situations; directing aircraft launch and recovery operations using hand or light signals; and maintaining logs of airplane launches, recoveries, and equipment maintenance. Provide operation, maintenance, inspection, and repair of power generation systems and equipment such as diesel generators and light carts. Responsibilities + Installs, removes, and operates electrical power generating and control systems, automatic transfer switches, aircraft arresting systems, and associated equipment. Checks equipment for serviceability. Positions equipment such as gasoline and diesel engines, generators, switchgears, air compressors, and other power generating auxiliary equipment. Installs, positions, rewinds, and pretensions aircraft arresting systems. Certifies aircraft arresting systems as required. Checks installed equipment to ensure compliance with publications, policies, and directives. Inspects, tests, and services component systems such as safety, fuel, lubrication, cooling, air pressure, pumps, regulators, governors, and accessory equipment. Observes and interprets instruments such as ammeters, voltmeters, frequency meters, synchro scopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges. Adjusts engine generator systems to maintain proper voltage, current frequency, and synchronization. Synchronizes multiple generators. Operates high and low voltage switches, circuit breakers, rheostats, and other controls on switchgear and distribution panels. Performs electrical power control and distribution functions. + Maintains, modifies, and repairs electrical power generating and control systems, automatic transfer switches, aircraft arresting systems, and associated equipment. Performs inspections and interprets findings to determine corrective action. Identifies and records engine and generator malfunctions. Uses precision test equipment, troubleshoots malfunctions, and inspects parts for excessive wear and other conditions. Removes, repairs, and replaces defective power generating equipment components. Performs corrosion control. Inspects and replaces gauges and meters. Maintains aircraft arresting systems, including electrical, hydraulic, rewind, and pneumatic systems, and other electronic components. Bench checks components and subassemblies. Tests and calibrates repaired items. Reviews performance data and maintenance records to determine adequacy of maintenance. Interprets data related to electrical power generating and aircraft arresting systems to ensure overall mission success. + Maintains records. Posts entries on operation, inspection, and maintenance records. Records meter readings, wear and alignment measurements, fuel consumption, and other data in performance logs. Furnishes information for reports and recommends changes to correct defective equipment or improve operating procedures. Complies with environmental policies. + Ensure all work areas and equipment are kept clean, orderly and in a safe manner. + Performs quality and safety self-inspections. + Responsible for proper utilization and safeguarding of all government and contractor provided property (e.g., to include government facilities, equipment and tools). + Perform other duties as assigned in accordance with contractual, functional, and mission requirements. Qualifications Minimum Qualifications Education/Certifications: + Prior military service of AFSC 3E072, Power Production Journeyman + Must be MAAS/BAK-12 Factory Trained &amp; Certified + High school diploma or equivalent. + Must be a U.S. Citizen with a current, valid U. S. Passport and Driver’s License (able to drive manual transmission). + Must have and maintain a valid U. S. SECRET Security Clearance prior to deployment. + Must have the capability of obtaining an Air Force flight line driver’s license. + Must be able to pass a flight line access test and obtain flight line access badge. + Must be able to pass employment and deployment qualification requirements that include psychological, medical, dental, drug testing, background checks, etc. + Candidates must successfully complete both online and hands on CBRN (chemical, biological, radiological and nuclear) defense training. Training includes the successful fit testing of DOD provided protective gear. Experience: + Must have four years of experience in operation and maintenance of BAK-12 aircraft arresting systems and completed factory training on Mobile Aircraft Arresting Systems (MAAS)/BAK-12. + Shall have knowledge of principles of electronics and electricity including generation, conversion, transformation, distribution and utilization. + Must have three years of experience operating and maintaining prime power spot generators and backup generators. Skills: + Must be capable of giving and receiving instructions. + Must be fluent reading and speaking English. + Able and willing to work periods of long hours to meet mission requirements. + Military experience in a contingency environment and knowledge and experience working with government contracts preferred. Other Requirements: + Work will be outdoors and indoors. Work in extreme outside temperatures reaching 115 degrees and winds reaching 30mph may be required. Exposure to cold, dust, noise, and chemicals may occur. Overtime and shift work may be required depending on contractual needs. Employee must comply with all Federal, State and Local regulations and published Company work rules as well as written instructions. Task specific work environment training will be provided as required. Must be prepared to function in a wartime environment to support U. S. interests. 100% Overseas Assignment. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description<br></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Safety Officer (A)</b> in <b>Kuwait</b>. Our client is a reputed organization in the <b>Oil &amp; Gas / Power</b> sector seeking skilled, motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Monitor compliance with HSE policies and procedures.<br></li><li>Conduct workplace safety inspections and audits.<br></li><li>Perform risk assessments and hazard identification.<br></li><li>Ensure Permit to Work (PTW) procedures are followed.<br></li><li>Investigate incidents and recommend corrective actions.<br></li><li>Conduct safety inductions and toolbox talks.<br></li><li>Ensure compliance with local and international safety standards.<br></li><li>Maintain safety documentation and reports.<br></li></ul>Required Skills<br><ul><li>HSE Management – Implement and monitor safety systems.<br></li><li>Risk Assessment – Identify and mitigate workplace hazards.<br></li><li>Permit to Work System – Ensure safe execution of maintenance activities.<br></li><li>Incident Investigation – Analyse accidents and recommend improvements.<br></li><li>Oil &amp; Gas / Power Maintenance Safety – Maintain safe operational practices.<br></li></ul>Preferred Skills<br><ul><li>NEBOSH/IOSH Certification<br></li><li>Emergency Response Planning<br></li><li>Safety Training &amp; Leadership<br></li></ul>Work Experience Requirements<br><p>Candidates should possess a minimum of <b>10 years</b> of experience in Oil &amp; Gas or Power Plant maintenance environments. Experience in implementing HSE standards, conducting safety audits, and managing site safety compliance is essential.<br></p><br>Education<br><ul><li><b>Minimum:</b> Any Degree<br></li><li><b>Preferred:</b> Safety-related certification<br></li><li><b>Additional:</b> NEBOSH / IOSH (Preferred)<br></li></ul>Contact Number - 9786888866<br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities include maintenance and serviceability procedures for subsystem components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of airframes and power plants engineering principles, techniques, and methods in the maintainability of existing equipment and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Major Job Activities Description: · Apply and provide a thorough working knowledge of airframes and power plant systems to include aircraft modification procedures and experience with specific airframe, hydraulic, engine, and propeller systems, systems integration, system/component failure analysis, inspection, repair, and testing of airframes and power plant systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. · Performance abilities include performance of maintenance and servicing related aircraft components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation and incorporates applicable technical directives and bulletins. · Troubleshoots and/or repairs malfunctions in the aircraft airframes and power plants systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J MRC/MIMs, to include performing calibration procedures and required functional tests. · Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. · Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components · Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. · Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer’s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. · Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. · Performs applicable “O” and “I” level maintenance functions in support of In-Flight Refueling Systems and rebuild shop and Aircraft Tire &amp; Wheel rebuilding. · Perform scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment, pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated airframes and power plants equipment systems. · Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. · Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/ · Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures · When necessary, perform other duties and supervisory functions, critical to the function of the program and to assure compliance with the Performance Work Statement (PWS). Qualifications EDUCATION and/or EXPERIENCE: Graduation from a standard four (4) year high school or equivalent (GED) This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance. Material &amp; Equipment Directly Used Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arm. What We Bring: At V2X we strive to be market competitive in our total reward offerings. Employee benefits include the following: Healthcare coverage Life insurance, AD&amp;D, and disability benefits Retirement plan Wellness programs Paid time off, including holidays and leave of absences Eligible Tuition Reimbursement Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are excited to announce an opening for a Project Administrative Assistant in Al Kuwait, specifically focused on supporting operations within the power industry. This role is essential in providing comprehensive administrative support for projects related to the Ministry of Electricity, Water, and Renewable Energy (MEWRE). As a Project Administrative Assistant, you will play a vital role in coordinating tasks and facilitating communication among various stakeholders, ensuring that projects run smoothly and efficiently. Your organizational skills and ability to manage multiple responsibilities will be key to your success in this position.</p><p>This role presents an excellent opportunity for career growth, particularly for individuals interested in the engineering, procurement, and construction sectors within the power industry.</p><p><b>Responsibilities:</b></p><ol><li>Coordinate project schedules by organizing meetings, managing calendars, and ensuring that all team members are aligned on deadlines and deliverables, which enhances overall project efficiency.</li><li>Assist in the preparation of project documentation, including reports, presentations, and proposals, utilizing software tools to ensure accuracy and professionalism in all materials produced.</li><li>Maintain and update project tracking systems, ensuring that all project milestones are recorded and communicated effectively to stakeholders for full transparency and accountability.</li><li>Support the project manager in resource allocation by monitoring team workload and identifying any potential bottlenecks to optimize workflow and project outcomes.</li><li>Act as a liaison between team members and external clients, facilitating communication and addressing inquiries to ensure client satisfaction and project success.</li><li>Conduct research and gather information relevant to ongoing projects, utilizing various sources to provide insights that inform project strategies and decisions.</li><li>Prepare meeting agendas and take detailed minutes during project meetings, distributing them to relevant parties to ensure accountability and effective follow-up on action items.</li><li>Assist in onboarding new team members by providing them with necessary resources and training materials, fostering a welcoming and supportive environment for all staff.</li><li>Monitor project budgets and expenses, providing regular updates to the project manager to ensure financial objectives are met and resources are utilized efficiently throughout the project lifecycle.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Bachelor's degree in any discipline, providing a solid educational foundation for administrative tasks and project management.</li><li>Minimum of three years of relevant experience in administrative support, particularly within the engineering, procurement, and construction sectors of the power industry.</li><li>Proficient in project management software, essential for tracking progress and managing timelines effectively across multiple projects.</li><li>Strong communication skills in both Arabic and English to facilitate collaboration among team members and external stakeholders, ensuring clarity and understanding.</li><li>Excellent organizational abilities to manage multiple tasks and prioritize effectively in a fast-paced environment while maintaining attention to detail.</li><li>Familiarity with engineering terminology and document types, enhancing your effectiveness in supporting technical projects.</li><li>Experience dealing with government ministries or public relations, which is crucial for navigating project requirements and compliance.</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview **This position will be physically located in Kuwait in support of LOGCAP** Under supervision of Master Electrician, : Installs, inspects, troubleshoots, repairs, operates, and maintains electrical systems and components of electrical power distribution and generating equipment. Performs operations and maintenance duties to maintain power to telecommunications equipment, and maintains the facility’s physical electrical distribution system in good repair. Electrical work experience includes electrical installation in commercial and industrial categories. Electrician complies with National Electrical Code (NEC) 2008 for repairs and upgrades to existing construction, and NEC 2011 standards apply for new construction, contract specifications, and MIL Standards/Regulations. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Installs, inspects, troubleshoots, repairs, operates, and maintains electrical systems and components of electrical power distribution and generating equipment. + Performs operations and maintenance duties to maintain power to telecommunications equipment, and maintains the facility’s physical electrical distribution system in good repair. + Electrical work experience includes electrical installation in commercial and industrial categories. + Electrician complies with National Electrical Code (NEC) 2008 for repairs and upgrades to existing construction, and NEC 2011 standards apply for new construction, contract specifications, and MIL Standards/Regulations. + Performs other duties as assigned. Qualifications + Minimum Qualifications: + Education/Certifications: One-year related experience may be substituted for one year of education, if degree is required. + High School Diploma or equivalent. + Must possess Journeyman Electrician license + Must be able to obtain and maintain a host country driver's license. + Experience: + Minimum of five (5) to seven (7) years of work experience in the electrical wiring industry, including experience in planning, laying out, and installing electrical distribution systems IAW the NEC, and will have been under the direct supervision of a qualifying electrician for a licensed electrical contractor. + Skills: + Thorough knowledge of Electrical Codes + Ability to manage multiple job sites and priorities + Ability to communicate, interact and work effectively and cooperatively with all people including those from diverse ethnic and educational backgrounds + Ability to recognize the importance of safety in the workplace, follow safety rules, practice safe work habits, utilize appropriate safety equipment and report unsafe conditions to the appropriate administrator + Must have basic computer skills + Working Conditions: + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. + Physical Requirements: + Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. If the use of arm and/or leg controls requires exertion of forces greater than that for sedentary work and the worker sits most of the time, the job is rated for light work. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship. USAF equivalent position is Aircraft Mechanic Apprentice. Essential Responsibilities: Performs all daily launch/recovery duties in support of operational requirements. Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems. Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion. Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools. Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs. Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft. Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks. May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Must be able to work with little-to-no supervision. Performs all other duties as assigned as requested.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum. Minimum of one year of actual Aircraft Mechanic maintenance experience required. Must have basic knowledge of basic and complex mechanical maintenance and repair. Must possess basic knowledge of technical publications related to aircraft mechanical maintenance. Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems. Must be able to inspect and operate ground support and auxiliary equipment. Must achieve a passing grade in all required courses/certifications for continued employment, as needed. Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment. Must be able to Deploy to Forward Locations (other countries) as Directed by the Government Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods. Must be able to speak, read, write, and understand English. Must submit updated SF-86 within 30 days of hire start date. Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance. Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment. Must have current/active State Issued Driver s License. Must be able to acquire and maintain a valid flight-line Government Driver s License. Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages. Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</p><p>Associate degree in a relevant career field. Licensed by the FAA as an Airframe and Powerplant Mechanic. RPA Deployment Experience. Prior Experience as a Defense Contractor. Aircraft Mechanic Experience within the last 10 years. MQ-9 Experience as an Aircraft Mechanic. MQ-9 Aircraft Composite Repair / Replacement Experience.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Sales Engineer will be responsible for driving sales, providing technical support, and delivering excellent customer service. The day-to-day tasks include identifying sales opportunities, maintaining customer relationships, conducting product demonstrations, and providing after-sales support to ensure customer satisfaction.</p><p><br></p><p><b>Key Responsibilities:</b></p><p><br></p><ul><li>Develop and maintain relationships with end users.</li><li>Promote CAT Power Tools &amp; Accessories through targeted customer visits and product demonstrations at clients sites to increase product awareness, generate new opportunities, and drive sales.</li><li>Conduct regular client visits across All industries</li><li>Prepare proposals, quotations, and close sales deals</li><li>Achieve sales targets and maintain client database</li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Bachelor's degree in Engineering or relevant field</li><li>Technical Support skills and experience</li><li>Strong Communication and Customer Service skills</li><li>Problem-solving abilities and a detail-oriented mindset</li><li>Experience in the power tools .</li><li>4-5 years sales experience in Kuwaiti Market.</li></ul><p><br></p></div>

<ul><li>Prepare and maintain the L3 schedule with Primavera P6</li><li>Lead as Project Control Planning Manager is responsible for preparing.</li><li>Updating and maintaining project L3/L4 schedule including engineering, procurement, construction, start up and operations on Primavera P6. </li><li>In-depth working knowledge of P6 software is mandatory for this position.</li><li>Job include planning cost and resource loading on P6 software and preparing various reports such as critical path report, variance report, daily report, weekly report, monthly report etc.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor’s degree in civil, mechanical, or electrical engineering. </li><li>PMP Certification is an added advantage</li><li>10 Years Total and Minimum 5 years of experience in EPC environment with past projects in Combined Cycle Power Project (CCPP) and Sea Water Reverse Osmosis Project (SWRO)</li><li> Mandatory Requirements: Combined Cycle Power Project (CCPP) and Sea Water Reverse Osmosis Project (SWRO) experience. </li></ul>

<p>The Data Center Electrical Engineer is responsible for the engineering-level ownership, reliability, safety, and performance of the data center electrical power infrastructure, from the utility intake through to the rack level. The role manages electrical maintenance strategy, switching procedures, electrical safety programs, vendor activities, spare parts planning, and system performance. The Electrical Engineer also directs the electrical manning technicians, authorizes and leads critical switching operations, and acts as the electrical authority during incidents and escalations.</p><p>Key Responsibilities</p><ul><li>Take engineering ownership of the data center electrical infrastructure, including MV/LV distribution systems, HV/MV switchgear, GIS/AIS, transformers, RMUs, UPS systems, STS/ATS systems, generators, fuel systems, batteries, and protection systems.</li><li>Develop, maintain, and control electrical switching procedures.</li><li>Authorize, lead, and supervise HV/MV and critical LV switching operations.</li><li>Manage the arc flash and electrical safety program for the data center.</li><li>Ensure full compliance with Lockout/Tagout, LOTO, Permit to Work, PTW, and electrical isolation requirements.</li><li>Develop and manage the annual electrical Planned Preventive Maintenance, PPM, program in line with OEM recommendations.</li><li>Coordinate generator load-bank testing and generator readiness programs in accordance with NFPA 110.</li><li>Prepare, review, and maintain electrical Standard Operating Procedures, SOPs, Methods of Procedure, MOPs, and Emergency Operating Procedures, EOPs.</li><li>Review and approve the safe execution of electrical procedures and maintenance activities.</li><li>Coordinate electrical maintenance vendors and supervise OEM major services, testing, repairs, and equipment overhauls.</li><li>Develop and maintain the spare-parts and critical-inventory plan for electrical systems.</li><li>Analyze electrical system performance, protection settings, load profiles, power usage, and equipment capacity.</li><li>Identify and implement opportunities for energy optimization and improved electrical system performance.</li><li>Lead root cause analysis for electrical faults, failures, alarms, and service interruptions.</li><li>Develop and follow up corrective and preventive actions arising from electrical incidents.</li><li>Direct, support, develop, and train the electrical manning technicians.</li><li>Support integrated systems testing, testing and commissioning, and electrical system readiness activities.</li><li>Support predictive maintenance programs, including thermography, transformer oil sampling, and condition monitoring.</li><li>Act as the electrical technical authority during incidents, emergencies, and operational escalations.</li><li>Provide 24/7 on-call support and shift coverage assistance when required.</li></ul><p>Minimum Qualifications</p><ul><li>Bachelor s degree in Electrical Engineering.</li><li>Minimum of five years of experience in electrical operations and maintenance involving MV/LV electrical systems.</li><li>At least two years of experience in a data center, critical facility, industrial facility, or similarly high-availability environment.</li><li>Practical experience with HV/MV switching and critical LV switching operations.</li><li>Working knowledge of electrical protection systems, switching procedures, isolation practices, and electrical safety requirements.</li><li>Working knowledge of generator control systems such as DeepSea, ComAp, or Woodward.</li><li>Familiarity with NFPA 110 and applicable NEC references.</li><li>Demonstrated experience in electrical maintenance planning, technical procedure writing, and vendor management.</li><li>Strong technical reporting and documentation skills.</li><li>Fluency in written and spoken English.</li></ul><p>Preferred Qualifications and Certifications</p><ul><li>HV/MV switching authorization or license issued or recognized by the relevant GCC regulatory authority.</li><li>OEM training or certification related to UPS and critical-power systems from Schneider Electric, Eaton, Vertiv, ABB, or an equivalent manufacturer.</li><li>OEM training or certification related to MV/LV switchgear and protection systems from Schneider Electric, ABB, Siemens, Eaton, or an equivalent manufacturer.</li><li>OEM training or certification related to generators from Caterpillar, Cummins, MTU, Rolls-Royce, Kohler, SDMO, or an equivalent manufacturer.</li><li>OEM training or certification related to STS, ATS, and power-distribution systems from Vertiv, ABB, Eaton, Socomec, or an equivalent manufacturer.</li></ul><p>Other Requirements</p><ul><li>Willingness to work in a critical data center environment.</li><li>Availability for 24/7 on-call support.</li><li>Ability to support shift coverage, planned maintenance, emergency response, and critical switching activities.</li><li>Ability to coordinate with operations, facilities, safety, vendors, and OEM service teams.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in Electrical Engineering.</li><li>Minimum of five years of experience in electrical operations and maintenance involving MV/LV electrical systems.</li><li>At least two years of experience in a data center, critical facility, industrial facility, or similarly high-availability environment.</li><li>Practical experience with HV/MV switching and critical LV switching operations.</li><li>Working knowledge of electrical protection systems, switching procedures, isolation practices, and electrical safety requirements.</li><li>Working knowledge of generator control systems such as DeepSea, ComAp, or Woodward.</li><li>Familiarity with NFPA 110 and applicable NEC references.</li><li>Demonstrated experience in electrical maintenance planning, technical procedure writing, and vendor management.</li><li>Strong technical reporting and documentation skills.</li><li>Fluency in written and spoken English.</li><li>HV/MV switching authorization or license issued or recognized by the relevant GCC regulatory authority.</li><li>OEM training or certification related to UPS and critical-power systems from Schneider Electric, Eaton, Vertiv, ABB, or an equivalent manufacturer.</li><li>OEM training or certification related to MV/MV switchgear and protection systems from Schneider Electric, ABB, Siemens, Eaton, or an equivalent manufacturer.</li><li>OEM training or certification related to generators from Caterpillar, Cummins, MTU, Rolls-Royce, Kohler, SDMO, or an equivalent manufacturer.</li><li>OEM training or certification related to STS, ATS, and power-distribution systems from Vertiv, ABB, Eaton, Socomec, or an equivalent manufacturer.</li><li>Willingness to work in a critical data center environment.</li><li>Availability for 24/7 on-call support.</li><li>Ability to support shift coverage, planned maintenance, emergency response, and critical switching activities.</li><li>Ability to coordinate with operations, facilities, safety, vendors, and OEM service teams.</li></ul>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship. USAF equivalent position is Aircraft Mechanic Apprentice. Essential Responsibilities: Performs all daily launch/recovery duties in support of operational requirements. Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems. Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion. Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools. Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs. Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft. Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks. May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Must be able to work with little-to-no supervision. Performs all other duties as assigned as requested.</p><p><strong>Desired Candidate Profile</strong></p><p>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum. Minimum of one year of actual Aircraft Mechanic maintenance experience required. Must have basic knowledge of basic and complex mechanical maintenance and repair. Must possess basic knowledge of technical publications related to aircraft mechanical maintenance. Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems. Must be able to inspect and operate ground support and auxiliary equipment. Must achieve a passing grade in all required courses/certifications for continued employment, as needed. Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment. Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods. Must be able to speak, read, write, and understand English. Must submit updated SF-86 within 30 days of hire start date. Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance. Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment. Must have current/active State Issued Driver s License. Must be able to acquire and maintain a valid flight-line Government Driver s License. Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages. Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</p> <p>Associate degree in a relevant career field. Licensed by the FAA as an Airframe and Powerplant Mechanic. RPA Deployment Experience. Prior Experience as a Defense Contractor. Aircraft Mechanic Experience within the last 10 years. MQ-9 Experience as an Aircraft Mechanic. MQ-9 Aircraft Composite Repair / Replacement Experience.</p>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.USAF equivalent position is Aircraft Mechanic Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Performs all daily launch/recovery duties in support of operational requirements.</li><li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li><li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li><li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li><li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li><li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li><li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li><li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li><li>Must be able to work with little-to-no supervision.</li><li>Performs all other duties as assigned as requested.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Mechanic maintenance experience required.</li><li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li><li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li><li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications</p><ul><li>Associate degree in a relevant career field.</li><li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Aircraft Mechanic Experience within the last 10 years.</li><li>MQ-9 Experience as an Aircraft Mechanic.</li><li>MQ-9 Aircraft Composite Repair / Replacement Experience.</li></ul>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential Responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneumatic/hydraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, including pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities Job Details / Position Summary The KC-130J Avionics/COM/NAV Technician will troubleshoot and/or repair malfunctions in the aircraft avionics/communication/navigation systems and all other supporting aircraft systems that require avionics skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities will include the application of troubleshooting, maintenance, and servicing procedures to include the inspection and repair of aircraft wiring/wiring connector, breaker assemblies, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of electrical, avionics, and COM/NAV engineering principles, techniques, and methods necessary to repair and maintain aircraft, applicable equipment, and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Major Job Activities Description: + Applies and has a thorough working knowledge of COM/NAV and avionics systems to include; aircraft modification procedures and experience with specific avionics systems, e.g., data bus, antennas, software, displays, communications/navigation equipment, systems integration, system/component failure analysis, inspection, repair, and testing of COM/NAV and electrical systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. + Troubleshoots and/or repairs malfunctions in the aircraft avionics/communication/navigation systems and all other supporting aircraft systems that require avionics skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J maintenance requirement cards (MRC)s and maintenance instruction manuals (MIM)s, to include performing calibration procedures and required functional tests. + Performance abilities include maintenance and serviceability procedures to supported components, to include wiring and wiring connector condition, breaker assemblies, component removal, inspection, reinstallation, and incorporates applicable technical directives and bulletins. + Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. + Has a strong understanding and ability to interpret maintenance instruction manuals (MIMS) and all associated maintenance publications, orders, and directives and the processes to document such maintenance actions + Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components + Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. + Has the ability to review, interpret, and apply the assigned maintenance manual procedures in support of assigned maintenance actions. Apply practical knowledge of wiring schematics of aircraft COM/NAV and avionics systems and the interpretation of technical data contained within those schematics and/or sources of maintenance data + Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer’s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. + Removes, troubleshoots, inspects, reinstalls, and/or replaces aircraft COM/NAV and avionics components, radios, antennas, electrical wiring, and all other associated electronic components that support the operation and use of the aircraft systems/capabilities as directed by approved maintenance manuals/procedures and/or Maintenance Control + Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. + Performs applicable “O” and “I” level battery maintenance functions as required per applicable maintenance manuals. + Performs required tasks associated with EKMS as directed by Kuwait Air Force and NAVAIR + Performs scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment (life rafts, first aid kits, etc..), pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated aviation life support equipment, airframes, and power plants systems. + Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. + Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures + Conducts off station maintenance when required. + When necessary, perform other duties and functions critical to the support of the program. Qualifications Education / Certifications: + High School Diploma + Must be able to obtain/maintain the following required certifications/qualifications: - Aviation Gas Free Engineering (AVGFE) certification - Auxiliary Power Unit (APU) run qualification -“I” Level Battery Maintenance certification - Applicable Support Equipment licensing - Electric Shop &amp; Comm Nav (210 &amp; 220) Collateral Duty Inspector (CDI) qualification - Electric Shop &amp; Comm Nav (210 &amp; 220) Collateral Duty Quality Assurance Representative (CDQAR) qualification - Corrosion Prevention and Control qualification - Confined Space Entry certification Experience: + Four years’ maintenance experience in the C-130J Avionics/Communications/Navigations specialty preferred.. + Must have a working knowledge of first aid procedures to be used in an emergency. + Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures). Specific Requirements: + Must be United States (U.S.) citizen , be able to read, write, and understand the English language + Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration. + Must be able to obtain and maintain at a Secret Security Clearance. + Must have a valid U.S. Driver’s License. + Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements. + Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc…) as required by local policies. + Must be willing and able to comply with all program functional requirements to include but not limited to: The performance of “I” Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp; MLG Tire re-building, MLG Brake repair/rebuilding, Battery maintenance support, and Oxygen Regulator testing/repair. + Must be willing and able to deploy off-site as required to support Kuwait Air Force operations. + Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required. + Must have the ability to communicate clearly, concisely and follow instructions when directed on assigned tasks. + Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions, to include but not limited to: The performance and completion of daily inspections (including the ability to inspect/sign off on all associated aircraft maintenance/technician specialties), marshalling/recovering aircraft, fueling, towing, mooring, and conducting post flight procedures to ensure aircraft are properly secured upon completion of maintenance. + As a Subject Matter Expert, must be willing to perform in-depth research, troubleshoot, and perform “O” and “I” level maintenance functions on all applicable aircraft systems and components necessary to return aircraft to a Full Mission Capable status; this includes determining material requirements, researching part numbers, ordering, tracking, and receiving materials as required to facilitate aircraft inspections/repairs. + Must be able to communicate directly with the customer, pilots, air crew members, management, and maintenance personnel to gather and relay pertinent data/information necessary to ensure aircraft depart timely and launches are not delayed. + Must have an in-depth knowledge of aircraft technical orders/job guides/publications—read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications. + Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations. + Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations. + Must perform as a team member, contributing to the success of the C-130J maintenance department. + Must be dependable and timely in managing assigned tasks, perform consistent quality maintenance. + Must have a proven ability to work independently with minimal direction. Material &amp; Equipment Directly Used Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds What We Bring: At V2X we strive to be market competitive in our total reward offerings. Employee benefits include the following: + Healthcare coverage + Life insurance, AD&amp;D, and disability benefits + Retirement plan + Wellness programs + Paid time off, including holidays and leave of absences + Eligible Tuition Reimbursement + Learning and Development resources + Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>