Production Technician Jobs

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description<br></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Mechanical Supervisor</b> in <b>Kuwait</b>. Our client is a reputed organization in the <b>Power Generation</b> sector seeking skilled and motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Supervise mechanical maintenance activities in a large-scale power plant.<br></li><li>Lead maintenance teams during planned and emergency shutdowns.<br></li><li>Inspect boilers, turbines, pumps, compressors, and rotating equipment.<br></li><li>Ensure preventive and corrective maintenance schedules are followed.<br></li><li>Coordinate with operations and engineering teams for plant reliability.<br></li><li>Ensure compliance with safety regulations and maintenance standards.<br></li><li>Prepare maintenance reports and documentation.<br></li><li>Guide technicians and ensure quality workmanship.<br></li></ul>Required Skills<br><ul><li>Mechanical maintenance of power plant equipment.<br></li><li>Preventive &amp; corrective maintenance planning.<br></li><li>Shutdown and turnaround maintenance.<br></li><li>Reading engineering drawings and technical manuals.<br></li><li>Team leadership with strong safety practices.<br></li></ul>Preferred Skills<br><ul><li>CMMS knowledge.<br></li><li>Root Cause Analysis (RCA).<br></li><li>Leadership in multicultural work environments.<br></li></ul>Work Experience Requirements<br><p>Candidates must possess a <b>minimum of 10 years</b> of experience in mechanical maintenance within a <b>large-scale power plant</b>. Experience supervising maintenance teams and handling critical plant equipment is essential.<br></p><br>Education<br><ul><li><b>Minimum:</b> Diploma in Mechanical Engineering<br></li><li><b>Preferred:</b> Bachelor's Degree in Mechanical Engineering<br></li><li><b>Additional:</b> Relevant maintenance or safety certifications<br></li></ul>Contact Number - 9786888866<br><br><br> </div>

<p>Role: Clinical Nurse Specialist</p><p>Industry Type: Medical Services / Hospital</p><p>Department: Healthcare &amp; Life Sciences</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Nursing</p><p>Education</p><p>UG: Diploma in General Nursing And Midwifery, B.Sc in Nursing</p><p><strong>Desired Candidate Profile</strong></p><p>REQUIRED NURSING CANDIDATES @ KUWAIT BASED PRIVATE MEDICAL CENTER MALE OR FEMALE CANDIDATES EXP : BSC /GNM WITH 3 YEARS PROMETRIC : MUST BEFORE APPLYING</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span><strong>Job Overview&nbsp;</strong></span></span></p><br><p><span><span>Weatherford is seeking a skilled and results-driven Field Specialist IV – MPD to join our team. This pivotal role is responsible for optimizing MPD and drilling processes, enhancing efficiency, and driving profitability. The ideal candidate will work closely with country and regional team to ensure accurate reporting and compliance. Additionally, this role plays a key part in conducting Operations safely and with minimal interruption to drilling. The job requires occasional package preparation in the Weatherford base where full compliance to Weatherford performance standards is required.</span></span></p><br><p><span><span><strong>Responsibilities:</strong></span></span></p><br><ul><li><span><span>Conducts maintenance of the Managed Pressure Drilling Services equipment at the job site and workshop when required.</span></span></li><li><span><span>Responsible for managing all aspects of the field/offshore</span></span></li><li><span><span>Directly responsible for the safe delivery of all MPD related services onsite.&nbsp;</span></span></li><li><span><span>On call 24hrs while on site.&nbsp;</span></span></li><li><span><span>Responsible for daily MPD reporting, hydraulic calculations, simulations and supervises shift personnel.</span></span></li><li><span><span>At the discretion of product line management (such as the Engineering Manager, Operations Manager, or their designee) will be responsible for working in the shop. This will include but not limited to green tagging, preparing, and/or assisting with shipping equipment to job site.</span></span></li><li><span><span>Rig up, operate and perform troubleshooting of the Managed Pressure Drilling Services equipment at the job site or workshop, ensure all paperwork and HSE requirements are met and complied with</span></span></li><li><span><span>Perform green tagging, In Casing Test, or other operational activities required on location or in the shop and all documented procedures for the Managed Pressure Drilling Services equipment on location.</span></span></li><li><span><span>Perform all RCD operations and monitoring.</span></span></li><li><span><span>Performs field operations of Managed Pressure Drilling Services equipment including operating the MPD Choke from the Operator’s Panel</span></span></li><li><span><span>Troubleshoot all electrical/electronic components and repair/maintain chokes and other mechanical equipment as necessary.</span></span></li><li><span><span>Completes all the necessary reports/paperwork related to Managed Pressure Drilling Services operations.</span></span></li><li><span><span>Keeps updated on all inspection requirements for the Managed Pressure Drilling Services equipment on the job site and in the shop.</span></span></li><li><span><span>Demonstrate and apply knowledge and understanding of all matters related to the Managed Pressure Drilling Services equipment and accessories.</span></span></li><li><span><span>Provides onsite job support to include but not limited to: mechanical, hydraulic functionality, revision changes, compatibility issues, troubleshooting, system versions, of Managed Pressure Drilling Services components.</span></span></li><li><span><span>Keep updated on Managed Pressure Drilling Services equipment, mechanical and hydraulic equipment manufacturing or regulatory standards.</span></span></li><li><span><span>Know and understand Weatherford Quality Policy and comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Workplace Instructions</span></span></li><li><span><span>Comply with Weatherford and client Quality, Health, Security and Environment (QHSE) procedures and documentation on site for specific shift.</span></span></li><li><span><span>Document all jobs and incidents in the Weatherford Performance Tracking System (WPTS).</span></span></li><li><span><span>Participate in the Permit to Work process.</span></span></li><li><span><span>Actively participate in ToolBox talks.</span></span></li><li><span><span>Must understand and comply with all safety rules and company policies of Weatherford</span></span></li><li><span><span>Required to complete the competency and training requirements identified by Global and Regional Management.</span></span></li><li><span><span>Complete training in order to meet the minimum HSE certification and technical requirements required perform their jobs</span></span></li><li><span><span>Perform all duties regarding Managed Pressure Drilling Services and Weatherford assigned by management or supervisors within the physical demand of the job description.</span></span></li></ul><p><strong>Skills</strong></p><br><ul><li><span><span>Mechanical ability necessary to perform repairs&nbsp;</span></span></li><li><span><span>Excellent Microsoft Outlook, Word and Excel computer skills&nbsp;</span></span></li><li><span><span>Self-motivator, self-starter&nbsp;</span></span></li><li><span><span>Good oral and written communication skills&nbsp;</span></span></li><li><span><span>Must be able to follow instructions Able to work closely with fellow employees</span></span></li><li><span><span>Customer focused.</span></span></li><li><span><span>General understanding of products and their application.&nbsp;</span></span></li><li><span><span>Individual must be adaptive to change, have multi-tasking ability.&nbsp;</span></span></li><li><span><span>Ability to work in a team environment.&nbsp;</span></span></li><li><span><span>Ability to work in high and cold temperature environment&nbsp;</span></span></li><li><span><span>Should be able to work closely with all levels of personnel and outside contractors.</span></span></li></ul><p><strong>Qualifications:</strong></p><br><ul><li><span><span>+5 years related to MPD field experience&nbsp;</span></span></li><li><span><span>Bachelor's degree</span></span></li><li><span><span>Strong MPD knowledge&nbsp;</span></span></li></ul><p><span><span>#LI-MD1</span></span></p><br><br> <p><span>Weatherford is a leading global energy services company. Our world-class experts partner with customers to optimize their resources and realize the full potential of their assets. Across our operating locations, including manufacturing, research and development, service, and training facilities, operators choose us for strategic solutions that add efficiency, flexibility, and responsibility to any energy operation.&nbsp;&nbsp;</span></p><br> <p><span>We are focused on technology development, digital solutions, and defining our footprint in the new energy space. Our ability to provide integrated solutions across our segments will be critical to growth in our core operations and the energy transition.&nbsp;&nbsp;</span></p><br> <p><span>Energy producers face unique challenges every day, so it is our job to create solutions that enhance safety, streamline operations, and sustain uptime to meet or exceed their targets. We operate across the global energy landscape employing some of the best diverse talent in the industry. At Weatherford, we understand the value each individual brings to the table. We celebrate diversity in all its forms and are immensely proud of our workforce. We invite you to join our passionate, talented, world-class team.&nbsp;&nbsp;</span></p><br> <p><span>When you join Weatherford, you instantly feel connected to something bigger – a community that is grounded by our core values and driven to create innovative solutions for our customers. We celebrate each other’s successes, grow together, and learn from each other constantly. Individually, we are impressive. Together, we are unstoppable. We are One Weatherford.&nbsp;</span></p><br> <p><b><span>Join Us:&nbsp;</span></b></p><br> <p><span>Weatherford is producing energy for today and tomorrow- with global opportunities as unlimited as your sense of adventure. Join us to make an impact on our customers, the industry, and the world.&nbsp;&nbsp;</span></p><br> <p><span>Weatherford is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.</span></p><br> <br> <br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description<br></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Electrical Supervisor</b> in <b>Kuwait</b>. Our client is a reputed organization in the industrial maintenance sector seeking skilled and motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Supervise electrical maintenance activities for cranes and lifting equipment.<br></li><li>Plan and execute preventive and corrective maintenance.<br></li><li>Diagnose electrical faults and ensure timely repairs.<br></li><li>Ensure compliance with electrical safety standards and procedures.<br></li><li>Coordinate maintenance schedules with operations teams.<br></li><li>Maintain maintenance records and equipment documentation.<br></li><li>Guide and supervise technicians during maintenance activities.<br></li><li>Ensure maximum equipment uptime and operational efficiency.<br></li></ul>Required Skills<br><ul><li><b>Electrical Maintenance</b> – Industrial electrical troubleshooting and repair.<br></li><li><b>Crane Maintenance</b> – Experience with crane electrical systems.<br></li><li><b>Lifting Equipment Maintenance</b> – Inspection and maintenance knowledge.<br></li><li><b>Preventive Maintenance</b> – Planning and execution of PM schedules.<br></li><li><b>Safety Compliance</b> – Knowledge of industrial electrical safety standards.<br></li></ul>Preferred Skills<br><ul><li>PLC troubleshooting<br></li><li>GCC/Kuwait maintenance experience<br></li><li>Team leadership and reporting<br></li></ul>Work Experience Requirements<br><p>Candidates should have a <b>minimum of 5 years</b> of relevant experience in electrical maintenance, specifically involving cranes and lifting equipment. Experience in industrial plants, construction, or heavy engineering environments is preferred.<br></p><br>Education<br><ul><li><b>Minimum:</b> Diploma in Electrical Engineering<br></li><li><b>Preferred:</b> Bachelor's Degree in Electrical Engineering<br></li><li><b>Additional:</b> Electrical Safety or Crane Maintenance Certifications (if available)<br></li></ul>Contact Number - 9786888866<br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><span><strong>Internship Overview</strong></span></p><br> <p><span>The Customer Relations &amp; Technical Support Intern will support the BTB team by assisting with customer communication, service request tracking, and coordination with technical teams. The intern will help improve customer experience through timely follow-up, accurate documentation, and efficient case monitoring while gaining hands-on exposure to customer service and technical support operations.</span></p><br> <p><span><strong>Key Responsibilities</strong></span></p><br> <ul> <li><span>Handle and track customer inquiries, ensuring accurate record maintenance.</span></li> <li><span>Coordinate with technical teams to monitor the progress of customer cases and service requests.</span></li> <li><span>Update customer records, service reports, and internal tracking systems.</span></li> <li><span>Follow up with customers regarding service requests and case updates.</span></li> <li><span>Support the preparation of customer service reports and maintain proper documentation.</span></li> <li><span>Assist in monitoring open cases and ensuring timely communication between customers and technical teams.</span></li> <li><span>Contribute ideas and recommendations to improve customer service processes.</span></li> </ul> <p><span><strong>Candidate Requirements</strong></span></p><br> <ul> <li><span>Current student or recent graduate in Business Administration, Management, Marketing, Information Technology, Engineering, or a related field.</span></li> <li><span>Strong verbal and written communication skills.</span></li> <li><span>Customer-oriented with excellent interpersonal skills.</span></li> <li><span>Good organizational and time-management abilities.</span></li> <li><span>Attention to detail and accuracy in documentation.</span></li> <li><span>Proficient in Microsoft Office applications (Excel, Word, PowerPoint).</span></li> <li><span>Ability to work collaboratively in a team environment.</span></li> <li><span>Proactive, professional, and eager to learn.</span></li> </ul> </div>

<p>Under general supervision, performs Artificial Lift (AL) installations and pulls, routine checks, and troubleshooting. Provides instruction and technical support to customer personnel in the proper handling and operating procedures of ALs. Performs basic well production analysis and repair of AL equipment and tests, splices, and repairs cable. Prepares paperwork to include IFTA reports, billable and non-billable hours, and mileage. Trains and coaches new hires in basic principles. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Maintains mechanical performance of truck used in transportation to and from the field. Trains and mentors lower level technicians at the well site. Performs basic mathematical calculations involving addition, subtraction, multiplication, and division is required. Basic reading comprehension and writing skills are required.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High School or Technical Diploma or a University Degree preferred</li><li>3 years to 8 years of experience in artificial lift operations including ESP Installations, pullouts, Y-tool, Shrouds and HPS is preferred</li><li>Willing work on a rotational schedule in remote locations in Kuwait (2 months On / 1 month Off)</li><li>Skills are typically acquired through completion of high school or similar education and 3 to 4 years of experience in artificial lift operations.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>To perform internal audit assignments in accordance with approved audit plans and accepted<br>auditing standards to evaluate the adequacy and effectiveness of internal controls, identify<br>risks, and recommend improvements to business processes and operational efficiency.</p> <p>Key Responsibilities:</p> <p> Perform internal audit assignments in accordance with the approved audit plan and under the<br>guidance of the Team Leader.<br> Conduct audit procedures by reviewing records, transactions, systems, and internal controls<br>to assess compliance with company policies, procedures, applicable regulations, and<br>management directives.<br> Collect, review, and analyze audit evidence to support audit findings and conclusions.<br> Conduct interviews with relevant personnel and review documents to understand business<br>processes and identify control weaknesses.<br> Prepare and maintain complete and accurate audit working papers in accordance with<br>internal audit standards.<br> Identify audit findings, control deficiencies, operational risks, and opportunities for process<br>improvement.<br> Prepare draft audit observations and recommendations for review by the Team Leader.<br> Assist in preparing audit reports, including supporting documentation and risk ratings.<br> Perform follow-up reviews to verify the implementation and effectiveness of agreed corrective<br>actions.<br> Maintain confidentiality of audit information and perform duties with integrity, objectivity, and<br>professional skepticism.<br> Keep up to date with internal auditing standards, applicable regulations, and best practices.<br> Perform any other duties assigned by the Team Leader.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Bachelor's Degree in Finance, Accounting, Business Administration,<br>or equivalent. <br>2-4 years of relevant internal audit experience. <br>CIA certification or progress toward CIA certification is preferred.</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b><u>Duties &amp; Responsibilities included but not limited to:</u></b></p><p><b><u>&nbsp;</u></b></p><ul><li>Assign, supervise, review, and participate in the work of the team that is responsible for the maintenance of HVAC / Fire Fighting / electrical/ Mechanical / MHE’s / Civil works</li><li>Monitor and control parts supplies and equipment as required</li><li>Assist the technical team in analyzing and solving problems</li><li>Organize planned preventive and corrective maintenance of all trades</li><li>Monitor all work activities and ensure compliance with the company policies and procedures, and safety protocols</li><li>Coordinate with clients, suppliers, contractors, subcontractors, etc</li><li>Coordinate with team, follow up and respond to the emails.</li><li>Prepare all necessary documents and statement, technical proposal to ensure smooth transition of works</li><li>Submit update schedules of project status, etc.</li><li>Prepare report related to the project status.</li><li>Manage budgeting and costing for each specific facilities management function.</li><li>Create and manage a system for material procurement, storage, and dispatch based on bar code scanning and software</li><li>Negotiate contracts with clients and vendors.</li><li>Supervise all facilities staff and external contractors</li><li>Manage budgeting and costing for each specific facilities management function</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Advanced knowledge of Microsoft Office Suite - Word, Excel, PowerPoint, Outlook, etc</p><p>• Technical report writing skills</p><p>• Background in technical/engineering operations and facilities management best practices</p><p>• Knowledge of basic accounting and finance principles, and experience in controlling cost, labor, material, equipment, etc</p><p>• Leadership and management skills</p><p>• Technical report writing skills</p><p>• Technical background</p><p>• Highly analytical, and able to make well-informed and timely decisions</p><p>• Excellent client management skills</p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an experienced Manager Cementing Laboratory to lead cementing laboratory operations and provide technical support for oil &amp; gas cementing projects. The role is responsible for laboratory testing, cement slurry design, job simulations, quality assurance, troubleshooting, and team leadership while ensuring compliance with API and QHSE standards.</p><p>Key Responsibilities</p><ul><li>Manage day-to-day cementing laboratory operations.</li><li>Design and evaluate cement slurries for primary and remedial cementing.</li><li>Conduct laboratory testing, including rheology, fluid loss, thickening time, and compressive strength.</li><li>Provide technical support to engineering, operations, sales, and clients.</li><li>Troubleshoot cementing challenges and recommend solutions.</li><li>Maintain laboratory equipment, SOPs, and quality documentation.</li><li>Lead and develop laboratory personnel while promoting a strong safety culture.</li><li>Ensure compliance with API standards, QHSE policies, and continuous improvement initiatives.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s degree in Engineering, Chemistry, or related discipline (Master s preferred).</li><li>12 15 years of cementing laboratory experience in the oil &amp; gas industry.</li><li>Strong expertise in cement slurry design, laboratory testing, and job simulation software.</li><li>Previous leadership experience managing laboratory teams.</li><li>Excellent analytical, communication, and stakeholder management skills.</li></ul><p>Benefit of Working with Visuna?</p><ul><li>A dedicated member of the team responsible for your placements and welfare</li><li>Some of the best day rates in the industry</li><li>FREE worldwide insurance and Medevac cover whist on a Placement</li><li>24/7 access to our specialist support team</li><li>Assistance and advice on a range of business topics</li><li>FREE access to our Competency Scheme</li><li>Increased exposure to potential clients and more placement opportunities</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul><li>Manage day-to-day body shop operations, including scheduling, workflow, and production control</li><li>Supervise and lead body shop technicians, painters, estimators, and support staff &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>Ensure all collision and body repairs meet dealership, OEM, and insurance company standards&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>Review and approve repair estimates, supplements, and final invoices&nbsp;&nbsp;</li><li>Coordinate with insurance adjusters and vendors to ensure timely approvals and parts availability </li><li>Monitor cycle time, productivity, quality, and profitability of body shop operations &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>&nbsp;Ensure proper use and maintenance of tools, equipment, and paint systems&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>Maintain a clean, safe, and compliant work environment&nbsp;&nbsp;&nbsp;&nbsp;</li><li>Handle customer concerns, complaints, and follow-ups to ensure high satisfaction levels&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li><li>Control costs, manage inventory, and minimize waste and rework&nbsp;&nbsp;&nbsp;&nbsp;</li><li>Ensure accurate documentation, billing, and record-keeping </li><li>Support training, performance evaluations, and continuous improvement initiatives </li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>High school diploma or equivalent (technical or vocational training preferred) </li><li>Proficiency in dealership management software and MS Office Suite (Word, Excel, Outlook, PowerPoint).</li><li>5+ years of automotive body shop or collision repair experience. </li><li>Strong knowledge of automotive parts and warehouse workflows</li><li>Experience using DMS systems</li><li>Excellent organizational and problem-solving skills</li><li>Ability to lead, train, and motivate warehouse staff</li><li>&nbsp;Strong customer service and problem-solving abilities </li><li>Ability to work in a fast-paced dealership environment </li><li>&nbsp;Excellent leadership, organizational, and communication skills </li></ul></div>

<p>Candidates must have at least Bachelor's / College Degree</p><p>The job requires both Male and Female applicants.</p><p>Minimum of 2 years working experience is required for this position</p><p>Additional Qualifications:</p><p>PRC-licensed Nurse with experience in a dental clinic</p><p><strong>Desired Candidate Profile</strong></p><p>Candidates must have at least Bachelor's / College Degree</p><p>The job requires both Male and Female applicants.</p><p>Minimum of 2 years working experience is required for this position</p><p>PRC-licensed Nurse with experience in a dental clinic</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>About Surbana Jurong</b></p><br><p>Surbana Jurong Group (SJ) is a leading global urban, infrastructure, and engineering consulting firm headquartered in Singapore. Driven by a vision to build cities and shape lives, SJ delivers sustainable, innovative, and integrated solutions across the built environment. With a strong presence across Asia, the Middle East, and Africa, SJ provides multidisciplinary expertise in transport, ports, marine, water, energy, buildings, and large-scale infrastructure projects.</p><br><p>SJ partners with governments, multilateral development agencies, and private sector clients to plan, design, supervise, and manage complex infrastructure projects throughout their lifecycle. By combining global expertise with local knowledge, SJ delivers practical, high-impact solutions that enhance connectivity, strengthen communities, and support long-term sustainable development.</p><br><p><b>The role</b></p><br><p>We are seeking an experienced <b>Senior Instrument &amp; Control Engineer </b>to support the delivery of major utility, industrial, and infrastructure projects. The successful candidate will provide technical oversight of instrumentation, automation, control, and SCADA systems throughout construction, testing, commissioning, and handover phases, ensuring reliable system integration and operational performance.</p><br><ul><li>Provide technical supervision of instrumentation, automation, control, telemetry, and SCADA system installation activities across complex infrastructure projects.</li><li>Review engineering documentation, instrumentation layouts, control philosophies, P&amp;IDs, loop diagrams, technical submittals, and construction methodologies.</li><li>Monitor installation, testing, commissioning, and system performance verification activities to ensure compliance with project requirements and industry standards.</li><li>Support factory and site acceptance testing, loop checking, system integration, and operational readiness assessments.</li><li>Oversee quality assurance and quality control processes for instrumentation, control, and automation systems.</li><li>Coordinate closely with multidisciplinary engineering teams to support seamless integration of electrical, mechanical, process, and control systems.</li><li>Maintain commissioning records, technical documentation, defect tracking registers, and project reporting requirements.</li><li>Review as-built documentation, operation and maintenance manuals, and handover deliverables.</li><li>Provide technical support for troubleshooting, system optimization, risk mitigation, and continuous improvement initiatives.</li></ul><p>With a track record of achievement in a related role, you will have gained your experience in a consultancy environment and have a passion for building trusted relationships to drive positive change and win new work.</p><br><p>Suitable applicants will have/be:</p><br><ul><li>Bachelor’s Degree in Instrumentation Engineering, Control Engineering, Electrical Engineering, Automation Engineering, or a related discipline.</li><li>Minimum 15 years’ experience in instrumentation, control, automation, or SCADA engineering on major utility, industrial, water, or infrastructure projects.</li><li>Strong knowledge of PLC, SCADA, telemetry, field instrumentation, control systems, communication networks, and integrated plant automation.</li><li>Demonstrated experience in testing, commissioning, loop checking, system integration, and performance verification of complex control systems.</li><li>Proven ability to review engineering documentation, control philosophies, instrumentation drawings, technical submissions, and contractor deliverables.</li><li>Experience coordinating multidisciplinary interfaces during construction, commissioning, and operational handover phases.</li><li>Excellent communication, stakeholder engagement, and technical reporting skills with strong English language proficiency.</li></ul><p>Surbana Jurong Group is an equal opportunity employer. We believe that diversity, equity, and inclusion strengthen our people, enrich our perspectives, and enable us to deliver better outcomes for our clients, partners, and the communities we serve.</p><br><p><b>How to apply </b></p><br><p>All applications must be submitted online and for a confidential discussion regarding this opportunity, please contact<b>&nbsp;Taimoor Tariq - </b><b>Taimoor.tariq@sjgroup.com</b></p><br><p>For further information about Surbana Jurong Group, please visit our website at www.surbanajurong.com.</p><br><p>To explore career opportunities and learn more about working with SJ Group, please visit our Careers page at SJ Careers.</p><br><p>All recruitment activities are managed by the Recruitment &amp; Talent team. At this stage, this position does not require agency support. Kindly do not forward resumes directly to SJ Group employees.</p><br><p>At Surbana Jurong, we put talent, hard work, teamwork and a fun workplace together to approach problems and solve them creatively and collaboratively. Join us in making a positive impact on the world!</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> <strong> <u>Job Summary:</u> </strong> </p> <p>Promotes and enforces the implementation of all QHSSE requirements and facilitates implementation and improvement of Barrier Management System (BMS) onboard the rig. Provides guidance and expertise to all personnel on Health, Safety, &amp; Environmental (HSE) standards and assists with related goals and programs.</p> <p> <strong> <u>Roles &amp; Responsibilities:</u> </strong> </p> <ul> <li>Ensures appropriate dissemination of HSE policies, procedures, and guidance documentation.</li> <li>Maintains a strong presence at the worksite, especially in high-risk, high-activity areas (i.e., deck, drill floor). Approximately 75% of the working day should be spent at the worksite, If this is not being met due to other administrative work loads then it must be raised first to STP then to Rig Manager and the office based QHSSE Focal Point assigned to the rig if not achieved in 1 hitch.</li> <li>Promotes Safety Programs (i.e., ADES 8 keys to incident-free) on the rig, ensuring each employee is aware of their standards and how to apply them.</li> <li>Promotes ADES Awards (i.e., TOFS award) to embed the concept into the rig culture.</li> <li>Assists in the management of the Stop, Hazard, Initiate, Engage, Learn and Demonstrate (SHIELD) program and encourage active participation by undertaking safety performance conversations by all persons on board.</li> <li>Ensures Stop Work Authority (SWA) obligation is understood by all persons on board and exercised promptly. This is integral to the Company s safety culture. The RSO is expected to lead by example and should coach all crew members by helping them intervene and stop work when opportunities arise.</li> <li>Assists the Senior Tool Pusher by monitoring/verifying compliance with control of work systems such as JSA, SOP s, PTW, Isolation, Confined Space, Rescue Planning etc.</li> <li>Complies with, monitor, and effectively contribute to the continuous improvement of BMS, HSE related policies and procedures, and relevant authority regulatory requirements.</li> <li>Identifies and addresses in collaboration with the site operations management by identifying and addressing HSE or noncompliance concerns.</li> <li>Assists with internal/external audit completion, close-out, and tracking.</li> <li>Consults with personnel including safety leaders and department heads on all matters concerning safety.</li> <li>Engages with crews during safety meetings and supervisors meetings; presents topics/findings.</li> <li>Monitors the selection of suitable personal protective equipment (PPE) including performing checks on sizing and suitability.</li> <li>Maintains awareness of substances hazardous to health and the correct storage, use, handling, and PPE requirements.</li> <li>Carries out onboard training and/or books crew training to ensure full compliance with the crew training matrix. Assist third-party trainers as necessary.</li> <li>Assists, monitors, and verifies compliance with the short-service employee (SSE) process to ensure effective implementation and that on-the-job training is being provided to develop the SSEs.</li> <li>Participate and assist the Senior Tool Pusher with rig-based incident reporting and investigations to determine root cause(s). Ensure investigation findings are shared between all crews on board.</li> <li>Assist with and deliver rig orientation and induction (as requested).</li> <li>Liaise with customer representatives and regulatory bodies as necessary.</li> <li>Perform emergency duties as per the rig station bill.</li> <li>Moderates the rig self-verification process.</li> </ul> <p> <strong> <u>Job Requirements:</u> </strong> </p> <p> <strong>Education &amp; Experience:</strong> </p> <ul> <li>Bachelor s degree</li> <li>Preferably a minimum of 2 years in an RSO role.</li> <li>Previous experience within the drilling industry in an HSE role/position. </li> </ul> <p> <strong>Skills/Competencies Required:</strong> </p> <ul> <li>Completion of all required ADES mandatory training requirements. </li> <li>Working knowledge of Microsoft Office products (Excel, Word, PowerPoint, etc.). </li> <li>Excellent written and verbal communication skills. </li> <li>Detail-oriented. </li> <li>Analytical thinking and solution Decision-making. </li> <li>Performance Management, planning, problem-solving, organizational, and time management skills. </li> <li>Inspire Trust.</li> </ul> <p> <strong>Certifications:</strong> </p> <ul> <li>As per ADES Training Matrix.</li> <li>Formal investigation training certification preferred (i.e., Taproot , Topset or equivalent). </li> <li>Recognized HSE training qualification preferred (i.e., NEBOSH, IOSH, OSHA or equivalent). </li> <li>Additional QHSSE audit certifications </li> </ul> <div><br></div></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Date Posted:</b></p><br><br>2026-08-12&amp;#xa;&amp;#xa;<p><b>Country:</b></p><br><br>United States of America&amp;#xa;&amp;#xa;<p><b>Location:</b></p><br><br>US-TX-EL PASO-M2 ~ 7201 Montana Ave ~ BLDG M2&amp;#xa;&amp;#xa;<p><b>Position Role Type:</b></p><br><br>Onsite&amp;#xa;&amp;#xa;<p><b><span>U.S. Citizen, U.S. Person, or Immigration Status Requirements:</span> </b></p><br><br>Active and transferable U.S. government issued security clearance is required prior to start date.​ U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance​&amp;#xa;&amp;#xa;<p><b>Security Clearance Type: </b></p><br><br>DoD Clearance: Secret&amp;#xa;&amp;#xa;<p><b>Security Clearance Status: </b></p><br><br>Active and existing security clearance required on day 1<br><br><p>At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.</p><br><br><br><p><b>What You Will Do :</b></p><br><br><p>The MIR will provide in-depth system knowledge and field experience related to the theory of operation and troubleshooting skills required to resolve complex Patriot missile system Major End Items (MEI) electronic and mechanical problems. The MIR will provide day-to-day execution on the Kuwait Patriot TA program as well as demonstrate the ability to perform depot level diagnostic, fault isolation, cleanup and repair capability for Patriot Weapon System MEIs. The MIR must affect all electronic repairs on location with detailed system knowledge, the ability to use all the hardware and software tools currently available to Organizational and Intermediate Maintenance.</p><br><br><p>This position also requires logistics experience as the role is to provide logistics support and services, logistics provisioning, analysis, data, and guidance. This position will also require tracking parts and incorporate in the Next Higher Assemblies (NHA) and assets installed into baselined Major Equipment Items (MEI). The logistics MIR will be the main focal point for the creation of the estimate Bill of Material (BOM) by coordinating with hardware, maintenance and other functions involved with the final priced Bill of material (BOM).</p><br><br><br><p><b>This position is located in Kuwait.</b></p><br><br><br><p><b>Qualifications You Must Have :</b></p><br><br><ul><li>Successful completion of a Patriot System Intermediate Maintenance Course&nbsp;for MOS 27X/94S/140L/916A or an equivalent course of instruction on a similar electronic system conducted by the military or the system contractor</li><li>Demonstrated 4 years of field maintenance experience troubleshooting, fault isolation, repair, and functional verifications of the Patriot Air Defense system or similar electronic systems using maintenance diagnostics, unit self-tests, BITE, tools and available test equipment</li><li>Demonstrated experience with Department of the Army Modification Work Order (DAMWO) installations, to include system integration and checkout</li><li>Secret Security Clearance required</li><li>Advanced knowledge of Microsoft Office software.</li><li>Experience creating tailored reports in Microsoft Excel from external and often compiled data sources.</li><li>Advanced experience using inventory, maintenance, and baseline configuration control database software systems.</li><li>Ability to read and understand technical drawings.</li><li>Experience with spares analysis and procurement.</li><li>Familiarity with Turn Around Time (TAT) analysis.</li></ul><br><p><b>Qualifications We Prefer:</b> </p><br><br><ul><li>Above qualifications plus five (5) years Patriot Depot Forward maintenance experience</li><li>Demonstrated experience with Raytheon Quality Control procedures</li><li>Demonstrated experience of the Patriot refurbishment, modification, and Enhanced Deep Maintenance</li><li>Experience using program management tools such as Earned Value Management System (EVMS), Integrated Master Plan (IMP) / Integrated Master Schedule (IMS), Risk and Opportunity Management or similar business processes</li><li>Demonstrated experience with Contractor Logistics Support</li><li>Demonstrated comprehensive planning skills</li><li>Exceptional judgment and decision-making skills</li><li>Strong interpersonal skills with special focus on achieving active participation of appropriate individuals across the business</li><li>Proficient with Microsoft Office and Project</li><li>Demonstrated experience with training of team members</li><li>Previous experience in International Patriot FMS Programs</li><li>Experience living and working in an overseas location</li><li>Raytheon Six Sigma Certified</li></ul><br><p><b>Required Education:</b></p><br><br><br><p>Bachelor’s Degree with 5 years of related experience, or Associates Degree with 8 years’ experience or HS Diploma/GED with 12 years of related experience. </p><br><br><br><p><b>What We Offer:</b></p><br><br><p>Whether you’re just starting out on your career journey or are an experienced professional, we offer a total rewards package that goes above and beyond with compensation; healthcare, wellness, retirement, and work/life benefits; career development and recognition programs. Some of the benefits we offer include parental (including paternal) leave, flexible work schedules, achievement awards, educational assistance, and child/adult backup care.</p><br><br><br><p><b>Additional Information:</b></p><br><br><br><p>Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products</p><br><br><br><p>#Patriot</p><br><br><br><br><p><i><b>As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend&nbsp;select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.</b></i></p><br><br><br>The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.<br><br><br>Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.<br><br>Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.<br><br>This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.<br><br>RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.<br><br><p><span><i>RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.</i> </span></p><br><br><br><br><p><b>Privacy Policy and Terms:</b></p><br><br><p><span>Click on this </span>link<span> to read the Policy and Terms</span></p><br><br><br> </div>

<p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p><p>The Service Desk Administrator plays a critical role in maintaining and supporting enterprise IT systems and services. Certified at the associate specialist level in multiple disciplines, such as systems, networks, and security (e.g., MCSA, CCNA-Security), this individual ensures the seamless operation of core systems through proactive monitoring, troubleshooting, and resolution of incidents and requests reported to the RCC-SWA. Key responsibilities include performing initial assessments, triage, research, and resolution of technical issues while maintaining clear communication with customers. The Service Desk Administrator also monitors and analyzes both scheduled and unscheduled Authorized Service Interruptions (ASIs) affecting Defense Information Systems (DISA) and CENTCOM facilities. They interpret network topologies to identify and address Hazardous Conditions (HAZCON) within the Southwest Asia Area of Responsibility (AOR). Equipped with a solid understanding of DISA guidelines and ITIL processes, the Service Desk Administrator is responsible for managing tickets throughout their lifecycle, ensuring timely updates, resolution, and customer satisfaction. This position combines technical expertise with a commitment to delivering high-quality support for mission-critical operations.</p><p>Program: OMDAC-SWACA</p><p>This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position.</p><p><strong>Responsibilities</strong></p><p><strong>Technical and Incident Support:</strong></p><ul><li>Provide enterprise-level technical and non-technical support for AESMP incidents and requests.</li><li>Act as an escalation point for complex application or system issues, offering guidance and resolution strategies.</li></ul><p><strong>Incident Analysis and Reporting:</strong></p><ul><li>Deliver feedback and analysis on technical and non-technical events to internal Vectrus leadership and Watch Officers.</li><li>Document all duty shift activities impacting theater operations, including outages, Authorized Service Interruptions (ASI), Hazardous Conditions (HAZCONs), receipt of Network Tasking Orders (NTO), and network trends or metrics.</li></ul><p><strong>Customer Service Excellence:</strong></p><ul><li>Maintain a high level of customer service during support interactions, adhering to service management principles and ensuring effective communication.</li></ul><p><strong>Regional Coordination:</strong></p><ul><li>Serve as the primary point of contact (POC) with Regional Network Operations Centers (NOCs), CENTCOM, and NETCOM to manage, monitor, and maintain awareness of ASIs within the RCC-SWA Area of Responsibility (AOR).</li></ul><p><strong>Documentation and Standardization:</strong></p><ul><li>Provide input and updates for Site Operating Procedures (SOPs) and Work Instructions (WIs) to standardize and improve processes.</li></ul><p><strong>Account and System Management:</strong></p><ul><li>Create, modify, and delete user and computer objects within Active Directory.</li><li>Provision, modify, and delete enterprise email accounts using DISA DEPO or the Army365 account portal.</li></ul><p><strong>Service Coordination:</strong></p><ul><li>Create, modify, and coordinate ASI requests with designated organizations for theater operations.</li></ul><p><strong>Work Environment:</strong></p><ul><li>Perform effectively in a fast-paced, deadline-driven environment, ensuring smooth operational continuity and swift issue resolution.</li><li>This role demands a combination of technical expertise, attention to detail, and the ability to collaborate across multiple stakeholders to support critical theater operations.</li></ul><p>Performs other duties and assignments assigned.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Requires an active active Secret Clearance</li><li>High School diploma or GED required.</li><li>Associate's degree in Computer Science, Management Information Systems (MIS), Information Systems (IS), Engineering, or a related field preferred.</li><li>All candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. Baseline certifications cannot also be used as a Computing Environment (CE) certification. The authorized certifications for this job title are listed as follows:</li><ul><li><strong>Baseline:</strong> Cisco: CCNA: Certified Network Associate - Security; CompTIA: CySA+ ce: Cybersecurity Analyst; CompTIA: Security+ ce; EC-Council: CND: Certified Network Defender; GIAC: GICSP: Industrial Cyber Security Professional; GIAC: GSEC: Security Essentials; ISC2: SSCP: Systems Security Certified Practitioner</li><li><strong>Computing Environment (CE):</strong> Cisco: CCNA: Certified Network Associate; CompTIA: Server+; Juniper: Networks Certified Internet Specialist (Any specialization); Microsoft: 365 Certified: Endpoint Administrator Associate; Microsoft: 365 Certified: Messaging Administrator Associate; Microsoft: 365 Certified: Modern Desktop Administrator Associate; Microsoft: 365 Certified: Security Administrator Associate; Microsoft: Certified: Azure Administrator Associate; Microsoft: Certified: Identity and Access Administrator Associate; Microsoft: Certified: Information Protection Administrator Associate; Microsoft: Certified: Security Operations Analyst Associate; Microsoft: MCSA: Windows 10; Microsoft: MCSA: Windows Server 2016; Red Hat: RHCSA: Certified Systems Administrator</li></ul><li>A minimum of 4 years of professional experience in roles demonstrating technical, administrative, managerial, or analytical expertise in management information systems.</li><li>Experience with a customer service-oriented company.</li><li>Academic study beyond high school (up to a bachelor s degree) in Software Engineering, Business Information Systems, or a similar discipline may substitute for up to three years of general experience.</li><li>Equivalent experience may substitute for formal education on a year-for-year basis: One year of relevant professional experience can replace one year of education if a degree is required.</li></ul>

<p>We are seeking a highly motivated and experienced Project Management Engineering Professional (Project Lead Engineer) to join our dynamic team at Hitachi, Ltd. This role will be responsible for leading the technical aspects of complex engineering projects from conception to completion, ensuring successful delivery within scope, budget, and schedule. The ideal candidate will possess a strong blend of technical expertise, project management skills, and leadership capabilities.</p><p><strong>Job Responsibilities</strong></p><ul><li>Lead and manage the technical execution of engineering projects, overseeing design, development, testing, and deployment phases.</li><li>Define project technical objectives, scope, and deliverables in collaboration with stakeholders and ensure alignment with business goals.</li><li>Develop and maintain comprehensive project plans, schedules, and resource allocation strategies.</li><li>Identify, assess, and mitigate technical risks and issues throughout the project lifecycle.</li><li>Manage and mentor project engineering teams, providing technical guidance and fostering a collaborative work environment.</li><li>Communicate project status, technical challenges, and solutions effectively to internal and external stakeholders.</li><li>Ensure adherence to relevant engineering standards, quality procedures, and regulatory requirements.</li><li>Conduct technical reviews and approvals of designs, specifications, and documentation.</li><li>Contribute to the continuous improvement of engineering processes and methodologies.</li><li>Collaborate with cross-functional teams, including R&amp;D, manufacturing, procurement, and sales, to achieve project objectives.</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Job Qualifications</strong></p><ul><li>Bachelor's degree in Electrical Engineering</li><li>Minimum of 14 years of experience in engineering, with at least 5 years in a project lead role</li><li>Proven track record of successfully leading and delivering complex engineering projects.</li><li>Excellent leadership, communication, and interpersonal skills.</li><li>Ability to manage multiple priorities and work effectively in a fast-paced environment.</li><li>Strong analytical and problem-solving abilities.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><br></p><p><b>Job Responsibilities:</b></p><ul><li>Supervise and coordinate mechanical works for villa projects.</li><li>Manage <b>DX air-conditioning/HVAC installation works</b>, including indoor and outdoor units, refrigerant piping, drainage, ducting, and ventilation systems.</li><li>Review HVAC/mechanical drawings and ensure installation is carried out as per approved drawings and specifications.</li><li>Coordinate with civil, electrical, and other MEP teams to avoid site conflicts.</li><li>Monitor subcontractors and technicians and ensure proper execution of work.</li><li>Conduct inspections and ensure the quality of installation.</li><li>Coordinate and support <b>testing, commissioning, and troubleshooting</b> of DX HVAC systems.</li><li>Monitor project progress and ensure works are completed within the required schedule.</li><li>Prepare daily/weekly progress reports and maintain project documentation.</li><li>Ensure compliance with project specifications, safety procedures, and HSE requirements.</li><li>Coordinate with consultants and clients for inspections and technical matters.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Requirements:</b></p><ul><li>Bachelor's Degree in <b>Mechanical Engineering</b>.</li><li><b>5–8 years of experience</b> in HVAC/MEP projects.</li><li>Strong practical experience in <b>DX HVAC systems and villa projects</b>.</li><li>Good knowledge of VRF/VRV, split units, package units, ducting, ventilation, and refrigerant piping.</li><li>Experience in HVAC installation, testing, commissioning, and troubleshooting.</li><li>Ability to read and understand HVAC/MEP drawings.</li><li>Good site supervision and coordination skills.</li><li><b>Kuwait/GCC experience is preferred.</b></li></ul><p><br></p></div>

<p>Diagnose and treat skin, hair, and nail disorders. Conduct patient consultations and develop treatment plans. Perform dermatological and aesthetic procedures as required. Maintain accurate medical records and patient documentation. Ensure compliance with medical regulations and clinical standards. Provide professional patient care and follow-up consultations. Collaborate with nursing and administrative staff to ensure smooth clinic operations.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Master's Degree in Dermatology is mandatory.</li><li>Minimum 2 years of experience as a Dermatologist.</li><li>Previous GCC experience is highly preferred.</li><li>Valid medical license/eligibility to practice Dermatology.</li><li>Strong communication and patient management skills.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>At Roche you can show up as yourself, embraced for the unique qualities you bring. Our culture encourages personal expression, open dialogue, and genuine connections, &nbsp;where you are valued, accepted and respected for who you are, allowing you to thrive both personally and professionally. This is how we aim to prevent, stop and cure diseases and ensure everyone has access to healthcare today and for generations to come. Join Roche, where every voice matters.</p><br>The Position<p>The Senior Field Service Engineer is responsible for providing on-site technical support for the installation, commissioning, preventative maintenance, and troubleshooting of Roche equipment. This role involves traveling to customer sites to ensure equipment is operating at peak performance. This individual will work under general supervision, handling routine service calls independently while assisting team members on more complex issues.&nbsp;You will play an important role in ensuring healthcare professionals and laboratories can operate with confidence, helping support better outcomes for patients across Kuwait.</p><br><p><b>Your Responsibilities</b></p><br><ul><li><p>Deliver the planned system installations and carry out installations as per Roche standards.</p><br></li><li><p>Ensure all service activities are performed and documented in a timely manner as per Roche standards.&nbsp;</p><br></li><li><p>Ensures coverage and support in line with agreements with customers and necessary accreditation requirements are met.&nbsp;</p><br></li><li><p>Escalate technical issues, PRI/PSI to appropriate internal stakeholder and follow up for closure.</p><br></li><li><p>Timely forecast spare parts of systems for line of expertise.&nbsp;</p><br></li><li><p>Ensure Key deliverables i.e. Uptime, customer satisfaction, Value of service to manage expectations for assigned strategic customers are met.</p><br></li><li><p>Accountable for mandatory upgrades/ modifications for assigned systems and ensure that been done for all systems in the country.</p><br></li><li><p>Provide expert technical opinion, identify possible solutions and recommend strategies that lead to timely and effective resolution of high priority issues. Act as mentor and lend support to FSEs to resolve complex and persistent issues.&nbsp;</p><br></li><li><p>Accountable for assigned administrative tasks (PPM scheduling, Modifications, e services, Service Marketing, Service revenue).</p><br></li><li><p>Establishes and develops a relationship with the customer that enhances the reputation and professionalism of Roche Diagnostics.&nbsp;</p><br></li><li><p>Provides clear and appropriate customer communication, including pro-active arrangement of routine preventative and corrective maintenance visits.</p><br></li><li><p>Ensures that all administration and back office tasks are completed in a timely and accurate manner.</p><br></li></ul><p><b>Who You Are</b></p><br><p><span>You are a proactive and customer-focused technical professional who enjoys solving problems and working in a dynamic field-based environment. You are able to work independently while maintaining strong collaboration with internal stakeholders and customers.</span></p><br><p><span>To be successful in this role, you bring:</span></p><br><ul><li><p><span>You hold a Bachelor degree in Engineering, Biomedical, Electronic, Mechatronics or relevant fields</span></p><br></li><li><p><span>You built 5 to 7 years of hands-on experience in a technical support, maintenance, or field service role. The ideal candidate built experience handling Roche IVD instruments such as Pre and Post Analytics / C6800 / Ultra plus / U6500 / Cobas PRO / Cobas Pure</span></p><br></li><li><p><span>You have advanced problem-solving skills, and the ability to communicate and collaborate effectively with customers and colleagues</span></p><br></li><li><p><span>You are able to manage multiple projects simultaneously and work under tight deadline</span></p><br></li><li><p><span>You are proactive with learning-oriented mindset, and are motivated to work in a hands-on environment and support field operations</span></p><br></li><li><p><span>You have deep understanding of digital technologies, Automation and their application in service operations&nbsp;</span></p><br></li><li><p><span>You have excellent communication skills and interpersonal skills with the ability to convey strategic concepts to a diverse audience&nbsp;</span></p><br></li><li><p><span>You are detail-oriented and able to work independently as well as collaboratively in a team environment</span></p><br></li><li><p><span>You are fluent in English; Arabic language is considered a plus</span></p><br></li></ul>Who we are<p>A healthier future drives us to innovate. Together, more than 100’000 employees across the globe are dedicated to advance science, ensuring everyone has access to healthcare today and for generations to come. Our efforts result in more than 26 million people treated with our medicines and over 30 billion tests conducted using our Diagnostics products. We empower each other to explore new possibilities, foster creativity, and keep our ambitions high, so we can deliver life-changing healthcare solutions that make a global impact.</p><br><p><br>Let’s build a healthier future, together.</p><br><p><b>Roche is an Equal Opportunity Employer.</b></p><br> </div>

<p>Responsible for efficiently managing and supervising the installation, commissioning, testing, and validation of electrical installations within KDD, ensuring compliance with KDD requirements, international standards, and applicable safety regulations. The role involves reviewing project specifications and user requirements, coordinating electrical works with project teams and contractors, monitoring project progress, and ensuring that all electrical systems are installed and commissioned safely, efficiently, and according to approved specifications and quality standards. Job duties include but are not limited to:</p><ul><li>Review project specifications, drawings, and user requirements to determine electrical installation requirements.</li><li>Supervise and coordinate electrical installation, commissioning, testing, and validation activities.</li><li>Ensure all electrical works are carried out in accordance with KDD standards, approved specifications, international standards, and applicable safety regulations.</li><li>Monitor the progress and quality of electrical works and ensure timely completion of assigned activities.</li><li>Coordinate with Project Managers, engineers, contractors, consultants, and other departments to ensure smooth execution of electrical projects.</li><li>Inspect electrical installations and verify that all works meet approved drawings, specifications, and quality requirements.</li><li>Identify and resolve electrical installation issues, technical problems, and site-related challenges.</li><li>Review and verify electrical drawings, layouts, specifications, and technical documentation.</li><li>Supervise contractors and subcontractors and ensure compliance with project requirements, safety procedures, and quality standards.</li><li>Conduct and oversee testing, commissioning, and validation of electrical systems and equipment.</li><li>Ensure proper documentation of inspections, testing, commissioning, and project handover activities.</li><li>Monitor the use of electrical materials, tools, and equipment and ensure compliance with approved standards.</li><li>Coordinate preventive and corrective actions related to electrical systems and installations.</li><li>Ensure compliance with electrical safety procedures and participate in risk assessments and safety inspections.</li><li>Provide technical guidance and support to electrical technicians and other team members.</li><li>Prepare progress reports and provide regular updates to the Project Manager on project status, issues, and completion.</li><li>Support the preparation of project schedules, resource requirements, and material requirements.</li><li>Ensure that electrical works are completed within the approved scope, schedule, quality, and budget requirements.</li><li>Perform other related duties and responsibilities as assigned by the Project Manager.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>Required Qualification:</h2><p>Bachelor's degree in electrical engineering or a related field. Minimum 5 years of relevant experience in electrical installation, commissioning, testing, and project supervision. Experience in supervising electrical installation and project activities. Experience in coordinating contractors and subcontractors for electrical works. Experience in industrial or manufacturing environments is preferred.</p><h2>Required Professional Skills:</h2><ul><li>Strong electrical troubleshooting and problem-solving skills.</li><li>Ability to interpret and analyze electrical drawings, schematics, and technical documentation.</li><li>Strong knowledge of electrical systems, equipment, and industrial applications.</li><li>Knowledge of applicable electrical standards, codes, and safety requirements.</li><li>Strong technical decision-making and analytical skills.</li><li>Effective project coordination and task management skills.</li><li>Strong planning, organizational, and time management skills.</li><li>Ability to identify technical issues and recommend appropriate solutions.</li><li>Strong communication and interpersonal skills.</li><li>Ability to work effectively with multidisciplinary teams and external stakeholders.</li><li>Good reporting and documentation skills.</li><li>Proficiency in Microsoft Office applications and relevant engineering software.</li><li>Strong attention to detail and commitment to quality.</li><li>Ability to work under pressure and manage multiple priorities.</li><li>Strong commitment to safety and compliance.</li></ul>