Mechanical Design Engineer Jobs in Kuwait

<p>Burgan Drilling Company is expanding its operations and is seeking experienced and motivated professionals to join our drilling teams. We are currently recruiting for the following positions:</p><p><strong>Senior Drilling Crew:</strong></p><ul><li>Rig Manager/ Sr. Tool Pusher</li><li>Night Tool Pusher</li><li>Driller</li><li>Assistant Driller</li><li>Chief Electrician</li><li>Chief Mechanic</li><li>Safety Officer</li></ul><p><strong>Junior Drilling Crew:</strong></p><ul><li>Derrickman</li><li>Floorman</li><li>Assistant Electrician</li><li>Assistant Mechanic</li></ul><p>Minimum Requirements:</p><ul><li>Relevant experience in Oil &amp; Gas specifically in deep drilling operations.</li><li>Experience in land drilling rigs is a MUST (3000HP &amp; above).</li><li>Looking for candidates with Intelligent, Pro-Active and proper planning skills.</li><li>Valid IWCF or IADC Well Control Certification for senior drilling crews (Supervisory Level / Driller Level Certificate as applicable)</li><li>Technical qualifications and trade certifications relevant to the position.</li><li>Good communication skills in English. (Reading &amp;Writing)</li><li>Medically fit and able to work in remote operational locations.</li><li>Strong commitment to safety and compliance with QHSE standards.</li></ul><p>Preferred Experience:</p><ul><li>Should have worked currently on 3000 HP or Minimum 2000HP Land Drilling Rigs.</li><li>Previous experience with International Drilling contractors is an advantage.</li><li>Middle East (GCC Countries) drilling experience is preferred.</li></ul><p>Interested candidates are invited to submit their updated CV, clearly indicating the position applied for with total years of drilling experience, rig types worked on, current location, availability with IWCF/Well Sharp Validity details.</p><p>Note: Only shortlisted candidates who meet the required qualifications and experience will be contacted.</p><p><strong>Desired Candidate Profile</strong></p><p><b>Minimum Requirements:</b></p><ul><li>Relevant experience in Oil &amp; Gas specifically in deep drilling operations.</li><li>Experience in land drilling rigs is a MUST (3000HP &amp; above).</li><li>Looking for candidates with Intelligent, Pro-Active and proper planning skills.</li><li>Valid IWCF or IADC Well Control Certification for senior drilling crews (Supervisory Level / Driller Level Certificate as applicable)</li><li>Technical qualifications and trade certifications relevant to the position.</li><li>Good communication skills in English. (Reading &amp;Writing)</li><li>Medically fit and able to work in remote operational locations.</li><li>Strong commitment to safety and compliance with QHSE standards.</li></ul><p>Preferred Experience:</p><ul><li>Should have worked currently on 3000 HP or Minimum 2000HP Land Drilling Rigs.</li><li>Previous experience with International Drilling contractors is an advantage.</li><li>Middle East (GCC Countries) drilling experience is preferred.</li></ul>

<p><h4>Division / Project</h4> <p>KBR’s Sustainable Technology Solutions (STS) group is looking for a Lead Design Engineer I - Mechanical for a 5-year PMC contract for the supply of programme management services with Kuwait Oil Company. The contract serves to support KOC to achieve its objectives of reaching optimum capacity in its oilfields and enhancing its facilities by the most efficient and economical means available.</p> <p>The contract aims to provide project management, coordination, planning, design, engineering, construction management, contracting, procurement, project controls and other services for construction of new oil field facilities, upgrading of existing facilities, and transfer of technology.</p> <h4>Primary objectives</h4> <p>To ensure mechanical equipment design integrity whilst leading the mechanical equipment engineering group on specific projects.<br> To provide specialist rotating equipment input to conceptual studies, FEEDs and detailed design for oil and gas developments.</p> <h4>Responsibilities</h4> <ul> <li>Ensure that design is fully compliant with project specification and client, international and local standards.</li> <li>Preparation of specifications for, and evaluation of, rotating equipment packages.</li> <li>Perform engineering design as required.</li> <li>Duties will include conceptual design and specification of rotating and packaged equipment and review of EPC’s detailed designs, technical bid evaluation and vendor documentation.</li> <li>Allocate work to team members. Ensure that within assigned team, personnel work within their competencies and with appropriate supervision.</li> <li>Quality assurance – responsible for working within the provisions and guidelines of the quality assurance system.</li> <li>Safety – responsible for personal safety and safe working practices. Understand and follow OH&S procedures.</li> <li>Ensure that conceptual and detail design work is appropriate for the complexity of the construction tasks and achieving a good balance between design costs and implementation costs.</li> <li>Evidence of feedback from supervisors and/or superintendents that constructability issues are addressed adequately in design and that work packs contain sufficient detail with no unnecessary content.</li> <li>Conduct site investigations, prepare reports.</li> </ul> <h4>Mandatory requirements</h4> <ul> <li>Engineering degree in a relevant discipline</li> <li>15 years of total post graduation experience</li> <li>10 years mechanical design experience in the oil and gas environment</li> <li>5 years in the stated designation</li> <li>A minimum of 3 years in automation software</li> </ul> <h4>Essential skills / experience</h4> <ul> <li>Hands on experience with large gas turbine driven compressors, pumps, generators packages is mandatory. Experience of other packaged equipment is desirable.</li> <li>Experience with the development of layouts for new facilities</li> <li>Experienced in the specification for, evaluation of and documentation for rotating equipment packages in a PMC environment would be advantageous.</li> <li>Ability to work in accordance with broad technical guidelines and with minimal supervision.</li> <li>Ability to work on multiple assignments to tight deadlines and prioritization of work to achieve them.</li> </ul> <p><strong>Decarbonization – Energy Transition – Sustainability</strong></p> <p><strong>Belong. Connect. Grow. with KBR!</strong></p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a skilled Diesel Mechanic to join our dynamic team within the construction and building industry in Kuwait. This role is crucial as it involves maintaining and repairing our fleet of heavy diesel machinery, which is essential for our ongoing projects. As a Diesel Mechanic, you will have the opportunity to work with cutting-edge technology and equipment, ensuring that our operations run smoothly and efficiently. This position not only offers a chance to showcase your technical skills but also provides a pathway for career advancement within our organization.</p><p>In this role, you will be part of a collaborative team that values innovation and continuous improvement. We believe in fostering a supportive work environment where employees can grow and develop their skills. You will receive training and mentorship from experienced professionals who are dedicated to your success. Our company culture emphasizes teamwork, respect, and shared goals, allowing you to thrive in your career while contributing to significant projects that make a difference in the community.</p><p>We are committed to your professional development, offering opportunities for further training and certifications in diesel technology and machinery maintenance. As you excel in your role, you will have the chance to take on more responsibilities and potentially move into supervisory or specialized positions. Join us and become a part of a company that invests in its employees and values their contributions to our success.</p><p><b>Responsibilities:</b></p><ol><li>Perform routine maintenance and repairs on diesel engines and related systems, using diagnostic tools and equipment to ensure optimal performance and compliance with safety standards.</li><li>Diagnose and troubleshoot mechanical issues in heavy machinery, utilizing your technical expertise to identify root causes and implement effective solutions.</li><li>Maintain accurate records of repairs and maintenance activities, ensuring compliance with company policies and contributing to inventory management for parts and tools.</li><li>Collaborate with other mechanics and engineers to develop maintenance schedules that minimize downtime and enhance the efficiency of our equipment.</li><li>Conduct inspections of machinery before and after use, ensuring that all safety protocols are adhered to and that equipment is in safe working condition.</li><li>Assist in the training of junior mechanics, sharing your knowledge and experience to foster a culture of learning and development within the team.</li><li>Stay updated on industry trends and advancements in diesel technology, applying new techniques and practices to improve maintenance processes.</li><li>Support the procurement process by advising on necessary parts and tools required for repairs and maintenance, ensuring minimal disruption to operations.</li><li>Participate in safety meetings and contribute to a culture of safety, ensuring that all work is performed in accordance with established safety regulations and best practices.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Proficient in diagnosing and repairing diesel engines and components.</li><li>Strong understanding of hydraulic and electrical systems in heavy machinery.</li><li>Experience with diagnostic tools and software for troubleshooting mechanical issues.</li><li>Ability to read and interpret technical manuals and schematics.</li><li>Excellent problem-solving skills and attention to detail.</li><li>Strong communication skills for effective collaboration with team members.</li><li>Commitment to safety and adherence to industry regulations.</li></ul></div>

EPP III, Generator (3 - 150KW) and HVAC Technician Kuwait, Perform troubleshooting, diagnostics, maintenance, and services on all types of military and commercial generators and HVAC systems used by the U.S. Army to include the 150kW EPP III generators. MEANINGFUL WORK AND PERSONAL IMPACT As a Generator and HVAC Mechanic, the work you ll do at GDIT will be impactful to the mission of the Worldwide Field Support contract for the U.S. Army. You ll play a crucial role in providing on-site technical and maintenance assistance, analyzing complex technical problems, and providing training to site operations and maintenance personnel. Perform maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Troubleshoot and repair HVAC, Chillers, and Environmental Control Units some are standalone units and others are mounted on trailers and vehicles. Maintain all types of commercial power generation equipment; military spec generators and Uninterrupted Power Systems (UPS). Operate a Load bank during testing Fabricate wire harnesses and solder terminals. Some work will be in a generator shop environment, and some work will be in a field environment. Other duties as assigned. WHAT YOU LL NEED TO SUCCEED Bring your Generator and HVAC expertise along with a drive for innovation to GDIT. The Generator and HVAC Mechanic must have: Education: High School diploma Experience: BA/BS plus 2 years experience, AA/AS/plus 4 years experience, or a High School diploma and 7 years experience Technical skills: Extensive diesel generator experience. Knowledge of generator parallel systems and switch gear. Experience with brazing copper tubing and evacuating and recharging refrigerant. Security Clearance: Secret Travel to Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, Iraq Role requirements: US passport must not expire for at least 2 years, valid US driver s license, and an international driver s permit (AAA) Skills Generator Repair HVAC Repair/Troubleshooting Generator Troubleshooting Power Generation Certifications Section 608 Technician Certification EPA is a plusMust meet CRC fitness standards for deployment to SWA (southwest Asia) and maintain those standards annually while on contract in SWA. GDIT IS YOUR PLACE At GDIT, the mission is our purpose, and our people are at the center of everything we do. Growth: AI-powered career tool that identifies career steps and learning opportunities. Support: An internal mobility team focused on helping you achieve your career goals. Rewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay. Community: Award-winning culture of innovation and a military-friendly workplace. OWN YOUR OPPORTUNITY Explore a career in program management at GDIT and you ll find endless opportunities to grow alongside colleagues who share your passion for the mission and delivering results. #GDITPriority #CECOMWFS #DefenseOCONUS

<p>Generator (3 - 150KW) and HVAC Technician Kuwait Perform troubleshooting, diagnostics, maintenance, and services on all types of military and commercial generators and HVAC systems used by the U.S. Army to include the 150kw generators. MEANINGFUL WORK AND PERSONAL IMPACT As a Generator and HVAC Mechanic, the work you ll do at GDIT will be impactful to the mission of the Worldwide Field Support contract for the U.S. Army. You ll play a crucial role in providing on-site technical and maintenance assistance, analyzing complex technical problems, and providing training to site operations and maintenance personnel.Perform maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories.Perform overhaul, maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories.Troubleshoot and repair HVAC, Chillers, and Environmental Control Units some are standalone units and others are mounted on trailers and vehicles.Maintain all types of commercial power generation equipment; military spec generators and Uninterrupted Power Systems (UPS).Operate a Load bank during testingFabricate wire harnesses and solder terminals.Some work will be in a generator shop environment, and some work will be in a field environment.Other duties as assigned. WHAT YOU LL NEED TO SUCCEED Bring your Generator and HVAC expertise along with a drive for innovation to GDIT. The Generator and HVAC Mechanic must have:Extensive diesel generator experience. Knowledge of generator parallel systems and switch gear. Experience with brazing copper tubing and evacuating and recharging refrigerant.Able to obtain and maintain a Secret Clearance.Travel to Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, IraqRole requirements: US passport must not expire for at least 2 years, valid US driver s license, and an international driver s permit (AAA). Ability to pass CRC to deploy.SkillsGenerator RepairHVAC Repair/TroubleshootingGenerator TroubleshootingPower Generation CertificationsSection 608 Technician Certification EPA is a plus GDIT IS YOUR PLACE At GDIT, the mission is our purpose, and our people are at the center of everything we do.Growth: AI-powered career tool that identifies career steps and learning opportunities.Support: An internal mobility team focused on helping you achieve your career goals.Rewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay.Community: Award-winning culture of innovation and a military-friendly workplace. OWN YOUR OPPORTUNITY Explore a career in program management at GDIT and you ll find endless opportunities to grow alongside colleagues who share your passion for the mission and delivering results. #GDITPriority #CECOMWFS #DefenseOCONUS</p><p><strong>Desired Candidate Profile</strong></p><p>Education: High School diplomaExperience: BA/BS plus 2 years experience, AA/AS/plus 4 years experience, or a High School diploma and 7 years experienceTechnical skills: Extensive diesel generator experience. Knowledge of generator parallel systems and switch gear. Experience with brazing copper tubing and evacuating and recharging refrigerant.Security Clearance: Able to obtain and maintain a Secret Clearance.Travel to Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, IraqRole requirements: US passport must not expire for at least 2 years, valid US driver s license, and an international driver s permit (AAA). Ability to pass CRC to deploy.SkillsGenerator RepairHVAC Repair/TroubleshootingGenerator TroubleshootingPower Generation CertificationsSection 608 Technician Certification EPA is a plus</p>

<p><b>Job Details</b></p><p>Position: Machine Mechanic</p><p>Location: Kuwait</p><p>Experience: Minimum 23 Years</p><p>Qualification: ITI / Diploma in Mechanical preferred</p><p>Industry: FMCG / Food &amp; Beverage / Bottling / Packaging</p><p>Required Experience</p><p>Candidate should have hands-on experience in FMCG/production plants and be able to independently handle maintenance and breakdown of:</p><ul><li>Filling Machines</li><li>Bottling Machines</li><li>Packaging Machines</li><li>Production Line Machinery</li><li>Conveyor Systems</li><li>Mechanical equipment</li></ul><p>Key Responsibilities</p><ul><li>Preventive and breakdown maintenance of production machinery</li><li>Troubleshooting and repairing mechanical faults</li><li>Regular inspection and servicing of machines</li><li>Machine overhauling, alignment and replacement of mechanical parts</li><li>Maintenance of hydraulic and pneumatic systems</li><li>Minimize machine breakdown and production downtime</li><li>Follow safety and maintenance procedures</li></ul><p>Benefits</p><ul><li>Accommodation Company Provided</li><li>Transportation Company Provided</li><li>8 Hours Duty</li><li>6 Days Working</li><li>Overtime Available</li></ul><p>Interested candidates can apply with their updated CV.</p><p>Kuwait | Immediate Hiring</p><p><strong>Desired Candidate Profile</strong></p><p>FMCG / Beverage / Bottling / Food Processing / Packaging industry experience is highly preferred. Only candidates with relevant production machinery maintenance experience will be considered.</p>

<p><b>Job Details</b></p><p>Position: Machine Mechanic</p><p>Location: Kuwait</p><p>Experience: Minimum 23 Years</p><p>Qualification: ITI / Diploma in Mechanical preferred</p><p>Industry: FMCG / Food &amp; Beverage / Bottling / Packaging</p><p>Required Experience</p><p>Candidate should have hands-on experience in FMCG/production plants and be able to independently handle maintenance and breakdown of:</p><ul><li>Filling Machines</li><li>Bottling Machines</li><li>Packaging Machines</li><li>Production Line Machinery</li><li>Conveyor Systems</li><li>Mechanical equipment</li></ul><p>Key Responsibilities</p><ul><li>Preventive and breakdown maintenance of production machinery</li><li>Troubleshooting and repairing mechanical faults</li><li>Regular inspection and servicing of machines</li><li>Machine overhauling, alignment and replacement of mechanical parts</li><li>Maintenance of hydraulic and pneumatic systems</li><li>Minimize machine breakdown and production downtime</li><li>Follow safety and maintenance procedures</li></ul><p>Benefits</p><ul><li>Accommodation</li><li>Company Provided Transportation</li><li>Company Provided 8 Hours Duty</li><li>6 Days Working</li><li>Overtime Available</li></ul><p>Interested candidates can apply with their updated CV.</p><p>Kuwait | Immediate Hiring</p><p><strong>Desired Candidate Profile</strong></p><p>FMCG / Beverage / Bottling / Food Processing / Packaging industry experience is highly preferred.Only candidates with relevant production machinery maintenance experience will be considered.</p>

<p><strong>Job Responsibilities:</strong></p><ul><li>Ensure that the warranty job card has all the correct details recorded for processing the claim such as (Technicians time recorded on card, along with a complete right-up).</li><li>Ensure that warranty parts are properly tagged, kept in safe storage and available for warranty audit by manufacture.</li><li>Supervise and check all warranty parts are scrapped in line with manufacture guidelines.</li><li>Complete warranty submitted report for Technical Manger approval.</li><li>Report any abnormalities to the Technical Manager.</li><li>Perform other ad-hoc duties given by the Technical Manager.</li></ul><p><strong>Education</strong></p><p>Bachelor's Degree or College Diploma Mechanical Engineering or anything related to Automobile Mechanic.</p><p><strong>Experience:</strong></p><p>Minimum 3-4 years of experience within Similar role in Automotive sector.</p><p><strong>Knowledge &amp; Skills:</strong></p><ul><li>Knowledge of auto electrical and auto-mechanical parts and auto-components &amp; its claim process</li><li>Good communication and organizational skills</li><li>Ability to work under pressure</li><li>Problem solving skills</li><li>Strong customer handling skills</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Supports an aircraft ground equipment (AGE) shop in a medium to large-sized military aircraft flying organization. Ensures the timely and proper performance of scheduled and unscheduled maintenance on AGE equipment and light support vehicles. Inspects, tests, and operates AGE to determine equipment serviceability and proper operation. Diagnoses mechanical and electrical circuitry malfunctions. Interprets drawings, wiring diagrams, schematics, and technical data to facilitate repairs and/or modifications to ground support equipment.</p> <p>Identifies appropriate replacement parts in TOs and technical documents and orders those parts. Removes, disassembles, repairs, cleans, treats for corrosion, assembles, and re-installs AGE accessories and components. Stencils and marks AGE as appropriate. Services equipment with fuel, oil, coolant, water, hydraulic fluid, and air as required. Operates, cleans, inspects, and services AGE tow vehicles. Maintains and documents AGE equipment and tow vehicle forms. Positions equipment to support aircraft maintenance and flying operations. Schedules PMIs as required. Adheres to safety procedures and follows technical orders as applicable.</p> <p>USAF equivalent position is AGE Mechanic Apprentice.</p> <h4>Essential responsibilities</h4> <ul> <li>Maintains external fuel and grounding systems; performs scheduled and unscheduled maintenance on GSE; inspects, tests, and operates GSE to determine equipment serviceability and proper operation; services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air; diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical publications.</li> <li>Disassembles and assembles malfunctioning basic GSE accessories and components; removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories; stencils and marks GSE in accordance with technical publications; stores, handles, labels, uses, and disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations.</li> <li>Prepares GSE for storage and mobility deployment; and operates, cleans, inspects, and services GSE towing vehicles.</li> <li>Assists in maintaining vehicle records and assists with updating paper and electronic equipment records; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations; practices good housekeeping, tool control, foreign object damage prevention, and safety at all times.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one-year actual AGE maintenance experience required.</li> <li>Must be qualified with most basic types and uses of AGE equipment.</li> <li>Must be familiar with diesel engine maintenance and repair, and HVAC maintenance and repair at the basic level.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect, repair, and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Vehicle operator training.</li> <li>AGE mechanic experience within the last 10 years.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Overview</b><br>With over 17,000 employees worldwide, the Microsoft Customer Experience &amp; Success (CE&amp;S) organization is responsible for the strategy, design, and implementation of Microsoft's end-to-end customer experience. Come join CE&amp;S and help us build a future where customers come to us not only because we provide industry-leading products and services, but also because we provide a differentiated and connected customer experience.<br>We are looking for a highly motivated and passionate&nbsp;<strong>Data Security Cloud Solution Architect (CSA)</strong>&nbsp;to drive our customer's security transformation on the&nbsp;Microsoft 365 Platforms. This is a customer-facing role, owning the security-focused technical relationship and strategy between the customer and Microsoft as well customer engagements, including architecture, implementation, and operational health.<br>The ideal candidate will have&nbsp;<strong>hands-on project delivery experience</strong>&nbsp;in customer-facing roles and success in leading in-depth&nbsp;<strong>technical data security architecture discussions</strong>&nbsp;with senior customer executives, Enterprise Security Architects, Enterprise Architects, IT Management, and Developers to Secure our customer's technology estate and drive Security as an enabler for Microsoft security solutions.&nbsp;<br><br><br><b>Responsibilities</b><br><strong>Trusted Advisor</strong>&nbsp;- Empower customers in their Microsoft Security adoption journey, being hands on with them to envision and define a Secure strategy, Architecture, and implementation of necessary security controls aligned with Microsoft 365 Azure Data Security workloads while ensuring operational health.<br><strong>Security Services Acquisition and Expansion&nbsp;</strong>- Position and deliver solutions that drive Data Security products usage with a focus on Microsoft Purview. Collaborate with Azure Infrastructure, Data, Apps teams to expand Security of cloud migration and AI projects.&nbsp;<br><strong>Understand Customer/Partner Technical Environment</strong>&nbsp;- Accelerate Business Value of overall Security adoption by improving security posture and ensuring that the solution exhibits "Secure by Design" and Zero Trust framework.&nbsp;<br><strong>Architecture Design and Deployment</strong>&nbsp;- Run Architectural Design Session to build a plan for implementing the data security solution — governing design in line with customer business goals and their technical environment. Outcome is consensus on solution design and next steps toward production<br><strong>Practice Development</strong>&nbsp;- Collaborate and orchestrate with other Cloud Solution Architects and Microsoft stakeholders including FastTrack, partner, and Microsoft Services in developing complex end-to-end Enterprise solutions with the Microsoft Security platform<br><strong>Voice of the Customer</strong>- Be a Voice of Customer to share insights and best practices, connect with Global Security teams at Microsoft, Engineering and Product teams to remove blockers and influence the solution roadmap.<br><br><b>Qualifications</b><br>Bachelor's Degree in Computer Science, Information Technology, Engineering, Business,<br>Cybersecurity, or related field 5+ years experience in data security technologies, cybersecurity, information technology (IT) consulting/support, systems administration, network operations, software development/support, technology solutions, practice development, architecture, and/or consulting OR equivalent experience.<br>Candidates should have broad experience in security and expertise around related technologies and concepts such as Zero Trust , threat management,<strong>&nbsp;AI Security,&nbsp;Data Security&nbsp;</strong>and Extended Detection &amp; Response (XDR) and Identity. Candidates should have knowledge as a data security engineer or consultant to understand industry trends and competitive landscape, advise customers on ways to strengthen their security posture or health, and land customer value through security.<br>The technical aptitude and experience to learn new cloud security technologies and understand relevant cloud security market trends.<br>Knowledge of cloud security platforms and competitors. Breadth of technical security experience and knowledge, with depth / Subject Matter Expertise in following security solutions:<br><ul><li><strong>Data Security - Microsoft Purview (hands on project delivery experience required) -&nbsp;</strong>Data Protection, Governance, Compliance, Data Loss Prevention, Data Security POsture Management / AI Data Security</li><li><strong>Threat protection -&nbsp;</strong>Microsoft Defender XDR, Defender for Cloud, Endpoint, Identity and O365&nbsp;</li><li>Identity and Access Management (Microsoft Entra)</li></ul>Microsoft certifications in those technologies prefered.&nbsp;<br> <br><p>This position will be open for a minimum of 5 days, with applications accepted on an ongoing basis until the position is filled.</p><br><br><br><p>Microsoft is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, citizenship, color, family or medical care leave, gender identity or expression, genetic information, immigration status, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran or military status, race, ethnicity, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable local laws, regulations and ordinances. If you need assistance with religious accommodations and/or a reasonable accommodation due to a disability during the application process, read more about <b><u>requesting accommodations.</u></b></p><br> </div>

<p><strong>Mechanic (HGV/LGV/Bus/Car)</strong> <strong>– UK & IRELAND ����</strong></p><p><strong>USI Global Recruitment</strong> is currently recruiting skilled and experienced professionals for multiple opportunities across the <strong>UK & Ireland</strong>.</p><p><strong> CURRENT VACANCIES</strong></p><p><strong>Mechanics</strong></p><ul><li><p>HGV Mechanics</p></li><li><p>LGV Mechanics</p></li><li><p>Truck Mechanics</p></li><li><p>Bus Mechanics</p></li><li><p>Car Mechanics</p></li></ul><br><br><p>�� IRELAND � Salary: €36,700 – €55,000 ✅ Minimum 3+ years of relevant experience ✅ Good technical skills ✅ Good English communication skills ✅ IELTS is not mandatory for many roles ✅ Eligibility and experience requirements apply depending on the position �� UK � Salary: £41,700 – £47,000 ✅ Minimum 3+ years of relevant experience ✅ Relevant qualifications/experience required ✅ UK ENIC qualification assessment may be required, where applicable ✅ English language requirements apply depending on the role </p><p><strong>Desired Candidate Profile</strong></p><p>� WHY USI GLOBAL RECRUITMENT? ✅ MEA Licensed Recruitment Agency ✅ ISO 9001:2015 Certified ✅ 5,000+ candidates successfully supported since 2020 ✅ 200+ international vacancies ✅ Recruitment opportunities across the UK & Ireland ✅ Professional guidance and support throughout the recruitment process</p><p><br></p><p><strong>Other Opportunities</strong></p><ul><li><p>TIG / MIG / ARC Welders</p></li><li><p>Vehicle Panel Beaters</p></li><li><p>Vehicle Spray Painters</p></li><li><p>Fabricators</p></li><li><p>CNC Programmers & Operators</p></li><li><p>Chef</p></li><li><p>NMBI-Registered Nurses</p></li></ul><p><br></p><p>� REFERRAL OPPORTUNITY If you have friends, relatives, colleagues or professional contacts who are experienced in any of the above positions and are interested in working in the UK or Ireland, please feel free to refer this opportunity to them. � Interested candidates can share their CV for suitable opportunities.</p><p>USI Global Recruitment – Connecting Skilled Professionals with International Career Opportunities.</p><p><br><br><br></p>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship. USAF equivalent position is Aircraft Mechanic Apprentice. Essential Responsibilities: Performs all daily launch/recovery duties in support of operational requirements. Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems. Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion. Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools. Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs. Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft. Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks. May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Must be able to work with little-to-no supervision. Performs all other duties as assigned as requested.</p><p><strong>Desired Candidate Profile</strong></p><p>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum. Minimum of one year of actual Aircraft Mechanic maintenance experience required. Must have basic knowledge of basic and complex mechanical maintenance and repair. Must possess basic knowledge of technical publications related to aircraft mechanical maintenance. Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems. Must be able to inspect and operate ground support and auxiliary equipment. Must achieve a passing grade in all required courses/certifications for continued employment, as needed. Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment. Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods. Must be able to speak, read, write, and understand English. Must submit updated SF-86 within 30 days of hire start date. Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance. Must have current/active State Issued Driver s License. Must be able to acquire and maintain a valid flight-line Government Driver s License. Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages. Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</p>

<p><h4>Job description</h4> <p>The aircraft mechanic II - powerplant/engine – back shop mechanic (T700/701C/D, T55-714) with experience in all three MDS UH60, CH47 & AH64 performs and inspects aviation unit (AVUM), intermediate (AVIM) and depot maintenance on assigned aircraft systems.</p> <p>Perform maintenance and repair of major assemblies and subassemblies of the T700/701C/D, T55-714 and auxiliary power units.</p> <p>Inspect engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks.</p> <p>Perform blade blending and blade replacement in cold section of powerplants.</p> <p>Replace or repair worn or damaged components, such as generators, alternators, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves.</p> <p>Ability to perform hot section inspections and determine replacement of hot section components (GG rotors, stators, fuel injectors, igniters, power turbine).</p> <p>Disassemble and inspect parts for wear, cracks, security, or other defects.</p> <p>Perform engine removal, replacement, reinstallation, and quick-change assembly (QCA) maintenance tasks.</p> <h4>Minimum requirements</h4> <ul> <li>High school graduate or equivalent is required.</li> <li>Five (5) years of recent applicable aircraft maintenance experience is required.</li> <li>With A&P: two (2) years aviation maintenance experience, and two (2) years' experience on MDS UH60, CH47, & AH64 is required.</li> <li>Without A&P: must have three (3) years aviation maintenance experience, three (3) years rotary wing aircraft experience and two (2) years on the assigned mission design series UH-60, AH-64, CH-47 (MDS) to qualify.</li> <li>All experience must be within the five (5) most recent years.</li> <li>Must be in possession of a valid U.S. passport for travel internationally. Passport must contain a minimum of 6 blank pages and 2 years remaining before expiration date.</li> <li>Ability to obtain/maintain a US government security clearance (NAC-I T1) public trust. US citizenship is required to obtain a security clearance, and for facility access to this site.</li> <li>Able to clear CENTCOM MOD physicals requirement for deployment (attend CRC).</li> <li>Must be able to obtain Kuwait visa.</li> </ul> <h4>Knowledge & skills</h4> <ul> <li>General knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</li> <li>Thorough knowledge of aircraft electrical and avionics component and system troubleshooting, repair procedures and replacement of parts.</li> <li>Thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers.</li> <li>Working knowledge of technical publications and logistics information systems.</li> <li>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</li> <li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>May work in aircraft maintenance hangar or outside.</li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> <li>May be exposed to extreme noise from turbine and jet engine aircraft.</li> <li>May be exposed to fumes or airborne particles; may be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft.</li> <li>Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift up to 50 pounds.</li> <li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li> <li>Must be able to see imperfections, micrometer readings and other small scales.</li> <li>Must be able to communicate by voice and detect sound by ear.</li> <li>Must be able to distinguish color and judge three-dimensional depth.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li> </ul> <h4>Compensation details</h4> <p>Not applicable</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Original posting</h4> <p>The company anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>The company is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p>Perform 3KW 150 KW maintenance to include EPP III Engine, Main Gen, and Control Panel overhaul, troubleshooting, diagnostics, maintenance, and services on all types of military and commercial generators and HVAC systems used by the U.S. Army. MEANINGFUL WORK AND PERSONAL IMPACT As a Generator rebuild and HVAC Technician, the work you ll do at GDIT will be impactful to the mission of the Worldwide Field Support contract for the U.S. Army. You ll play a crucial role in providing on-site technical and maintenance assistance, analyzing complex technical problems, and providing training to site operations and maintenance personnel. Perform overhaul, maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Troubleshoot and repair HVAC, Chillers, and Environmental Control Units some are standalone units and others are mounted on trailers and vehicles. Maintain all types of commercial power generation equipment; military spec generators and Uninterrupted Power Systems (UPS). Operate a Load bank and dynometer during testing Fabricate wire harnesses and solder terminals. Some work will be in a generator shop environment, and some work will be in a field environment. Other duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><p>Bring your Generator and HVAC expertise along with a drive for innovation to GDIT. The Generator and HVAC Mechanic must have:Education/Experience: High School diploma &amp; 6 yrs or BA/BS plus 2 years experience, AA/AS/plus 4 years experience,Technical skills: Extensive diesel engine rebuild and generator experience. Knowledge of generator parallel systems and switch gear.Experience with brazing copper tubing and evacuating and recharging refrigerant.Security Clearance: Ability to obtain and maintain a Secret clearance within 12 months of the start dateCitizenship: US citizenship requiredRole requirements: US passport must not expire for at least 2 years, valid US driver s license, and an international driver s permit (AAA)Must pass all medical requirements of CRC in order to deploy to the CENTCOM Area of OperationsSkillsMechanical Equipment RepairHVAC RepairMechanical TroubleshootingPower Generators CertificationsSection 608 Technician Certification EPA (must obtain within 6 months of hire)</p>

<p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The SharePoint Administrator/Developer will provide enterprise-level SharePoint administration, development, and customer support to military and civilian users. This role requires expertise in SharePoint infrastructure design, deployment, customization, and maintenance to ensure optimal system performance and user experience. The administrator will be responsible for gathering business requirements, designing tailored SharePoint solutions, and implementing best practices for collaboration, document management, automation, and security. This position demands strong skills in SharePoint Online, SharePoint 2019, Power Platform (Power Automate, Power Apps, Power BI), and Microsoft 365 integration to enhance operational efficiency. The candidate will work closely with stakeholders to analyze business needs, develop scalable solutions, and ensure compliance with enterprise security policies and military standards. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position.</p><p><strong>Responsibilities</strong></p><ul><li>Administer and configure Microsoft SharePoint 2019 and SharePoint Online at an enterprise level.</li><li>Manage SharePoint Enterprise Search, including index configurations and scheduling.</li><li>Plan, install, and maintain service packs, hotfixes, updates, and patches in a multi-server SharePoint environment during off-peak hours.</li><li>Utilize tools such as Event Viewer, ULS logs, Power BI, and Microsoft Graph API for troubleshooting and performance monitoring.</li><li>Implement Microsoft 365 integration, including Teams, OneDrive, and Power Platform (Power Apps, Power Automate, and Power BI).</li><li>Develop and maintain high-level technical and engineering documentation.</li><li>Act as the SharePoint subject matter expert, providing training and end-user support.</li><li>Demonstrate expertise in modern web development technologies, including SPFx (SharePoint Framework), React, TypeScript, PnP (Patterns and Practices), and the Client-Side Object Model (CSOM).</li><li>Customize SharePoint Online and SharePoint 2019 sites using modern design templates, JSON formatting, and adaptive cards.</li><li>Develop, automate, and manage workflows using Power Automate (Flow) and Microsoft Forms.</li><li>Ensure compliance with Zero Trust Security models, Microsoft Security &amp; Compliance Center policies, and Information Assurance (IA) standards.</li><li>Apply Security Technical Implementation Guidelines (STIGs) for governance and security.</li><li>Troubleshoot site-related issues, manage user permissions, and assist with site creation and configuration.</li><li>Automate SharePoint administration tasks using PowerShell and Microsoft Graph API.</li><li>Assist database administrators with configuring and monitoring SQL Server databases supporting SharePoint.</li><li>Performs other duties and assignments as required.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Requires an active Secret Clearance.</li><li>One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree in a Software Engineering or Business Information Systems discipline for three years general experience.</li><li>Associate Degree or equivalent experience preferably in Computer Science or MIS, IS, Engineering or related field.</li><li>This position requires candidates to adhere to DoD 8570.01. All candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. Baseline certifications cannot also be used as a Computing Environment (CE) certification. The authorized certifications for this job title are listed as follows: BASELINE: Cisco: CCNA: Certified Network Associate - Security Cisco: CCNP: Certified Network Professional - Security CompTIA: CASP+ ce: Advanced Security Practitioner CompTIA: Security+ ce CompTIA: SecurityX ce GIAC: GCED: Certified Enterprise Defender GIAC: GCIH: Certified Incident Handler GIAC: GICSP: Industrial Cyber Security Professional GIAC: GSEC: Security Essentials ISC2: CISSP ( or Associate ): Certified Information Systems Security Professional COMPUTING ENVIRONMENT (CE): Microsoft: 365 Certified: Enterprise Administrator Expert Microsoft: Certified: Azure Database Administrator Associate Microsoft: Certified: Azure Security Engineer Associate Microsoft: Certified: Azure Solutions Architect Expert Microsoft: MCA: Certified Architect ( Any ) Microsoft: MCITP: Database Administrator 2008 Microsoft: MCITP: Database Developer 2008 Microsoft: MCITP: Enterprise Administrator Microsoft: MCITP: SharePoint Administrator 2010 ( Technical III for SharePoint Admin only ) Microsoft: MCSA: Certified Solutions Associate: SQL Server 2012 Microsoft: MCSA: SQL 2016 Database Admin Microsoft: MCSA: SQL 2016 Database BI Development Microsoft: MCSA: SQL 2016 Database Dev Microsoft: MCSA: Windows Server 2008/2012/2016 Microsoft: MCSD: Microsoft Certified Solutions Developer ( Any ) Microsoft: MCSE: Core Infrastructure Microsoft: MCSE: Data Management and Analytics Microsoft: MCSE: Productivity Solutions Expert</li><li>One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree in a Software Engineering or Business Information Systems discipline for three years general experience.</li><li>At least five years of hands-on experience with Windows Server administration and Active Directory management, with a strong understanding of security principles, access controls, and compliance best practices in an enterprise environment.</li><li>Expert proficiency in web design and development, including HTML5, CSS3, JavaScript, and modern SharePoint Framework (SPFx), React, and TypeScript.</li><li>Proven ability to develop, deploy, and manage SharePoint web parts, lists, libraries, and workflows while designing, maintaining, and administering SharePoint portals.</li><li>Strong documentation skills with the ability to create technical documentation, user guides, and training materials, along with the capability to interact with key stakeholders, gather business requirements, and translate them into effective SharePoint solutions.</li><li>Experience working with Infrastructure, Web Servers (IIS), SharePoint Administration, and Microsoft 365 integration, as well as knowledge of Power Platform (Power Automate, Power Apps, Power BI) for workflow automation and business process optimization.</li><li>Experience with a customer service-oriented company.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Job Details</strong></p><p>Job Title Sr. Andorid Developer Job Code KWDEV2-102 Job Country Kuwait Zone Al Asimah Duties &amp; Responsibilities</p><p>Job title: Dotnet Developer Job Type: Permanent Job, Full Time Place of work: Udaipur Working hours: 9 hours (including 1-hour break) Minimum level of Education: Must be Engineering Graduate/ Post Graduate preferred Reporting line: Development Manager / Team Leader / CEO</p><p><strong>Requirements:</strong></p><ol><li>Proven work experience in as a computer software engineer or software developer</li><li>Hands-on experience in designing interactive applications</li><li>Ability to develop software in C, C++, C#, Java or other selected languages</li><li>Excellent knowledge of Relational Databases, SQL and ORM technologies (JPA2, Hibernate)</li><li>Experience in developing web applications using at least one popular web framework (JSF, Wicket, GWT, and Spring MVC)</li><li>Experience with test-driven development</li><li>Mastery of software engineering tools</li><li>Ability to document requirements and specifications</li><li>Familiarity with software development methodology and release processes</li><li>Minimum Bachelor degree in Computer Science or Engineering</li></ol><p><strong>Qualities:</strong></p><ol><li>Determines operational feasibility by evaluating analysis, problem definition, requirements, solution development, and proposed solutions.</li><li>Documents and demonstrates solutions by developing documentation, flowcharts, layouts, diagrams, charts, code comments and clear code.</li><li>Prepares and installs solutions by determining and designing system specifications, standards, and programming.</li><li>Improves operations by conducting systems analysis; recommending changes in policies and procedures.</li><li>Obtains and licenses software by obtaining required information from vendors; recommending purchases; testing and approving products.</li><li>Updates job knowledge by studying state-of-the-art development tools, programming techniques, and computing equipment; participating in educational opportunities; reading professional publications; maintaining personal networks; participating in professional organizations.</li><li>Protects operations by keeping information confidential.</li><li>Provides information by collecting, analyzing, and summarizing development and service issues.</li><li>Accomplishes engineering and organization mission by completing related results as needed.</li><li>Develops software solutions by studying information needs; conferring with users; studying systems flow, data usage, and work processes; investigating problem areas; following the software development lifecycle</li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Proven work experience in as a computer software engineer or software developer</li><li>Hands-on experience in designing interactive applications</li><li>Ability to develop software in C, C++, C#, Java or other selected languages</li><li>Excellent knowledge of Relational Databases, SQL and ORM technologies (JPA2, Hibernate)</li><li>Experience in developing web applications using at least one popular web framework (JSF, Wicket, GWT, and Spring MVC)</li><li>Experience with test-driven development</li><li>Mastery of software engineering tools</li><li>Ability to document requirements and specifications</li><li>Familiarity with software development methodology and release processes</li><li>Minimum Bachelor degree in Computer Science or Engineering</li></ul><p><strong>Qualities:</strong></p><ol><li>Determines operational feasibility by evaluating analysis, problem definition, requirements, solution development, and proposed solutions.</li><li>Documents and demonstrates solutions by developing documentation, flowcharts, layouts, diagrams, charts, code comments and clear code.</li><li>Prepares and installs solutions by determining and designing system specifications, standards, and programming.</li><li>Improves operations by conducting systems analysis; recommending changes in policies and procedures.</li><li>Obtains and licenses software by obtaining required information from vendors; recommending purchases; testing and approving products.</li><li>Updates job knowledge by studying state-of-the-art development tools, programming techniques, and computing equipment; participating in educational opportunities; reading professional publications; maintaining personal networks; participating in professional organizations.</li><li>Protects operations by keeping information confidential.</li><li>Provides information by collecting, analyzing, and summarizing development and service issues.</li><li>Accomplishes engineering and organization mission by completing related results as needed.</li><li>Develops software solutions by studying information needs; conferring with users; studying systems flow, data usage, and work processes; investigating problem areas; following the software development lifecycle</li></ol><p></p></section>

<ul><li><p>Design and detailed engineering of API 650 and API 620 storage tanks.</p></li><li><p>Review tender documents, client specifications, and design basis.</p></li><li><p>Prepare design calculations for tank shells, roofs, bottoms, nozzles, wind girders, anchor bolts, and foundation loading.</p></li><li><p>Prepare RFQs, Material Requisitions, Technical Specifications, BOQs, and Tank Design Reports.</p></li><li><p>Design Cone Roof, Dome Roof, Internal Floating Roof (IFR), External Floating Roof (EFR), and Aluminium Geodesic Dome Roof tanks.</p></li><li><p>Prepare General Arrangement (GA) drawings, nozzle orientation drawings, plate arrangement drawings, and fabrication detailing.</p></li><li><p>Review vendor drawings, FEA reports, and perform technical bid evaluations.</p></li><li><p>Coordinate with Civil, Process, Piping, Structural, Electrical, and Instrumentation teams.</p></li><li><p>Support fabrication, erection, hydrotesting, commissioning, and troubleshooting.</p></li><li><p>Conduct site surveys and recommend repair or fitness-for-service solutions.</p></li><li><p>Prepare as-built documentation and resolve technical queries.</p></li></ul><p><strong>Codes & Standards</strong></p><p><strong>Desired Candidate Profile</strong></p><ol><li><p>Storage tank engineering</p></li><li><p>Hydrocarbon storage terminals</p></li><li><p>Tank fabrication and erection</p></li><li><p>Welding, inspection, and testing</p></li><li><p>Material selection and corrosion engineering</p></li><li><p>Vendor document review</p></li><li><p>Technical bid evaluation</p></li><li><p>Mechanical design calculations</p></li><li><p>EPC project coordination</p></li><li><p>Strong communication and problem-solving skills</p></li></ol>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The SharePoint Administrator/Developer will provide enterprise-level SharePoint administration, development, and customer support to military and civilian users. This role requires expertise in SharePoint infrastructure design, deployment, customization, and maintenance to ensure optimal system performance and user experience. The administrator will be responsible for gathering business requirements, designing tailored SharePoint solutions, and implementing best practices for collaboration, document management, automation, and security. This position demands strong skills in SharePoint Online, SharePoint 2019, Power Platform (Power Automate, Power Apps, Power BI), and Microsoft 365 integration to enhance operational efficiency. The candidate will work closely with stakeholders to analyze business needs, develop scalable solutions, and ensure compliance with enterprise security policies and military standards. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver’s license in order to be qualified for this position. . Responsibilities + Administer and configure Microsoft SharePoint 2019 and SharePoint Online at an enterprise level. + Manage SharePoint Enterprise Search, including index configurations and scheduling. + Plan, install, and maintain service packs, hotfixes, updates, and patches in a multi-server SharePoint environment during off-peak hours. + Utilize tools such as Event Viewer, ULS logs, Power BI, and Microsoft Graph API for troubleshooting and performance monitoring. + Implement Microsoft 365 integration, including Teams, OneDrive, and Power Platform (Power Apps, Power Automate, and Power BI). + Develop and maintain high-level technical and engineering documentation. + Act as the SharePoint subject matter expert, providing training and end-user support. + Demonstrate expertise in modern web development technologies, including SPFx (SharePoint Framework), React, TypeScript, PnP (Patterns and Practices), and the Client-Side Object Model (CSOM). + Customize SharePoint Online and SharePoint 2019 sites using modern design templates, JSON formatting, and adaptive cards. + Develop, automate, and manage workflows using Power Automate (Flow) and Microsoft Forms. + Ensure compliance with Zero Trust Security models, Microsoft Security &amp; Compliance Center policies, and Information Assurance (IA) standards. + Apply Security Technical Implementation Guidelines (STIGs) for governance and security. + Troubleshoot site-related issues, manage user permissions, and assist with site creation and configuration. + Automate SharePoint administration tasks using PowerShell and Microsoft Graph API. + Assist database administrators with configuring and monitoring SQL Server databases supporting SharePoint. + Performs other duties and assignments as required. Qualifications + Qualifications: + Security Clearance: + Requires an active Secret Clearance. + Education / Certifications: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree in a Software Engineering or Business Information Systems discipline for three years general experience. + Associate Degree or equivalent experience preferably in Computer Science or MIS, IS, Engineering or related field. + This position requires candidates to adhere to DoD 8570.01. All candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. Baseline certifications cannot also be used as a Computing Environment (CE) certification. + The authorized certifications for this job title are listed as follows: + BASELINE: + Cisco: CCNA: Certified Network Associate - Security + Cisco: CCNP: Certified Network Professional - Security + CompTIA: CASP+ ce: Advanced Security Practitioner + CompTIA: Security+ ce + CompTIA: SecurityX ce + GIAC: GCED: Certified Enterprise Defender + GIAC: GCIH: Certified Incident Handler + GIAC: GICSP: Industrial Cyber Security Professional + GIAC: GSEC: Security Essentials + ISC2: CISSP (or Associate): Certified Information Systems Security Professional + COMPUTING ENVIRONMENT (CE): + Microsoft: 365 Certified: Enterprise Administrator Expert + Microsoft: Certified: Azure Database Administrator Associate + Microsoft: Certified: Azure Security Engineer Associate + Microsoft: Certified: Azure Solutions Architect Expert + Microsoft: MCA: Certified Architect (Any) + Microsoft: MCITP: Database Administrator 2008 + Microsoft: MCITP: Database Developer 2008 + Microsoft: MCITP: Enterprise Administrator + Microsoft: MCITP: SharePoint Administrator 2010 (Technical III for SharePoint Admin only) + Microsoft: MCSA: Certified Solutions Associate: SQL Server 2012 + Microsoft: MCSA: SQL 2016 Database Admin + Microsoft: MCSA: SQL 2016 Database BI Development + Microsoft: MCSA: SQL 2016 Database Dev + Microsoft: MCSA: Windows Server 2008/2012/2016 + Microsoft: MCSD: Microsoft Certified Solutions Developer (Any) + Microsoft: MCSE: Core Infrastructure + Microsoft: MCSE: Data Management and Analytics + Microsoft: MCSE: Productivity Solutions Expert + Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree in a Software Engineering or Business Information Systems discipline for three years general experience. + At least five years of hands-on experience with Windows Server administration and Active Directory management, with a strong understanding of security principles, access controls, and compliance best practices in an enterprise environment. + Expert proficiency in web design and development, including HTML5, CSS3, JavaScript, and modern SharePoint Framework (SPFx), React, and TypeScript. + Proven ability to develop, deploy, and manage SharePoint web parts, lists, libraries, and workflows while designing, maintaining, and administering SharePoint portals. + Strong documentation skills with the ability to create technical documentation, user guides, and training materials, along with the capability to interact with key stakeholders, gather business requirements, and translate them into effective SharePoint solutions. + Experience working with Infrastructure, Web Servers (IIS), SharePoint Administration, and Microsoft 365 integration, as well as knowledge of Power Platform (Power Automate, Power Apps, Power BI) for workflow automation and business process optimization. + Experience with a customer service-oriented company. + Skills &amp; Technology Used: + Ability to Administer and configure Microsoft SharePoint 2019 and SharePoint Online at an enterprise level. + Manage SharePoint Enterprise Search, including index configurations and scheduling. + Ability to Plan, install, and maintain service packs, hotfixes, updates, and patches in a multi-server SharePoint environment during off-peak hours. + Ability to Utilize tools such as Event Viewer, ULS logs, Power BI, and Microsoft Graph API for troubleshooting and performance monitoring. + Ability to Implement Microsoft 365 integration, including Teams, OneDrive, and Power Platform (Power Apps, Power Automate, and Power BI). + Develop and maintain high-level technical and engineering documentation. + Act as the SharePoint subject matter expert, providing training and end-user support. + Demonstrate expertise in modern web development technologies, including SPFx (SharePoint Framework), React, TypeScript, PnP (Patterns and Practices), and the Client-Side Object Model (CSOM).Demonstrate expertise in modern web development technologies, including: + SPFx (SharePoint Framework) + React + TypeScript + PnP (Patterns and Practices) + Client-Side Object Model (CSOM) At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<strong>Overview</strong> <br> <br> <p> <strong>**This position will be physically located in Kuwait**</strong> </p> <p> </p> <p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p> <p> </p> <p>Under the supervision of the Lead Technical Inspector, performs initial, in-progress and final inspections on various types of military, commercial, and other forms of Automotive equipment. Makes proper classification determinations as it pertains to U.S. Government property. Assists Shops as needed with Troubleshooting processes. Uses proper Test Measurement and Diagnostics Equipment (TMDE) in the daily operations phase. Conducts Actual Cost of Damages (ACOD), Estimated Cost of Damages (ECOD), and Estimated Cost of Repairs (ECOR). Conduct Tests on Serviced, Repaired and Overhauled equipment to ensure operating efficiency before returning to customer. Understands the automotive repair shop equipment and functions in order to provide assistance and coverage whenever needed. Perform technical research and ensure operational readiness of assigned equipment.</p> <br> <strong>Responsibilities</strong> <br> <br> <p> <em> <span>This position description is subject to change at any time as needed to meet the requirements of the program or company.</span></em> </p> <ul> <li>Perform initial, in-progress, classification and final inspections.</li> <li>Utilize Global Combat Support System-Army (GCSS-A), DOD CAC access required. </li> <li>Operate and inspect equipment to diagnose and troubleshoot defects.</li> <li>Use technical manuals, bulletins and written directives in the performance of all inspections.</li> <li>Examine parts for damage or excessive wear using micrometers and gauges.</li> <li>Order required repair parts using appropriate military or COTS technical manuals.</li> <li>Perform battlefield damage assessment and repair (BDAR).</li> </ul> <br> <strong>Qualifications</strong> <br> <br> <ul> <li> <strong>MINIMUM QUALIFICATIONS:</strong> </li> <li> <strong>Education/Certifications:</strong> One year related experience may be substituted for one year of education, if degree is required.<br> <ul> <li>High School Graduate or equivalent.</li> <li>Requires civilian trade qualification or US Army/Air Force/USMC Wheel Mechanic or equivalent (DD214 required).</li> <li>A valid US Driver s License and the ability to obtain a U.S. Government Motor Vehicle Operator s License and Kuwait Driver s License are required.</li> </ul> </li> <li> <strong>Experience:</strong> <br> <ul> <li>A minimum of Five (5) years experience in Automotive Repair, Shop operations or equivalent combination of education and experience is required.</li> <li>A minimum of two (2) years experience as a Technical Inspector is required.</li> </ul> </li> <li> <strong>Skills:</strong> <br> <ul> <li>Must possess the technical skills to identify different repair requirements as it pertains to Automotive Equipment.</li> <li>Must have expert knowledge of Technical and Commercial manuals for Servicing, Operational and Repair so that the correct procedures are used on the proper equipment.</li> <li>Must be an expert in Corrective Actions performed by the Maintenance Teams and only ensure that equipment is FMC when cleared by the shops</li> <li>Must have full knowledge of TMDE and its proper usage.</li> <li>Must be proficient in how the repair parts system works and what to do when it doesn t work correctly.</li> <li>Must be proficient in all phases of the paperwork that pertains to the Services, maintenance, repairs, classification and etc.</li> <li>Must have expert knowledge of the maintenance prints so as to be able to establish workload priority.</li> <li>Must have expert knowledge of Load Test procedures and processes.</li> <li>Must have expert knowledge of equipment operations as it is critical to working as a master driver for that shop.</li> <li>Ability to inspect check and test all types of automotive equipment.</li> <li>Must have a working knowledge of the Army Corrosion Prevention program.</li> <li>Must be Knowledgeable of the Army Maintenance Management Systems (TAMMS)</li> </ul> </li> <li> <strong>Physical Requirements</strong> <br> <ul> <li>Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.</li> </ul> </li> <li> <strong>Working Conditions</strong> <br> <ul> <li>The worker is subject to extreme cold. Temperatures typically below 32 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity.</li> <li>The worker is subject to extreme heat. Temperatures above 100 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity.</li> <li>The worker is subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.</li> <li>The worker is subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals.</li> </ul> </li> </ul> <p> </p>

Marble Works Supervisor & Technical Designer<br><br> Engineer , Sales Engineer <br><br>Civil Engineering<br><br> Job Id :100194776<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>Position: Marble Works Supervisor & Technical Designer<br><br>Location: Kuwait<br><br>Company: Studio Marmi<br><br>About The Role<br><br>Studio Marmi is looking for an experienced and motivated Marble Works Supervisor & Technical Designer to join our team. The ideal candidate must have strong practical experience in marble and natural stone projects, from material selection and fabrication to installation and project completion.<br><br>The candidate should be capable of combining technical design expertise with hands-on site supervision to ensure that all projects are completed according to company standards, specifications, and deadlines.<br><br>Key Responsibilities<br><br>Minimum 3 Years Of Experience Preferred.<br><br>Supervise all stages of marble works, including cutting, shaping, fabrication, and installation.<br><br>Prepare accurate and detailed Shop Drawings using Auto CAD.<br><br>Create 3D models and technical designs using Sketch Up.<br><br>Read and interpret architectural and structural drawings.<br><br>Perform quantity surveying and prepare material takeoffs.<br><br>Prepare cost estimates and price quotations based on project specifications.<br><br>Coordinate with suppliers, contractors, and installation teams.<br><br>Monitor project progress and ensure work is completed according to quality standards.<br><br>Minimize material waste and improve cost efficiency.<br><br>Provide practical solutions for site-related challenges.<br><br>Ensure projects are completed on time and within budget.<br><br>Required Qualifications<br><br>Bachelor's<br><br>Previous experience in the marble and natural stone industry is mandatory.<br><br>Strong experience in marble fabrication and installation supervision.<br><br>Proficiency in Auto CAD.<br><br>Proficiency in Sketch Up.<br><br>Strong knowledge of quantity surveying and cost estimation.<br><br>Ability to prepare Shop Drawings.<br><br>Excellent understanding of architectural and structural drawings.<br><br>Strong organizational and communication skills.<br><br>Ability to manage multiple projects simultaneously.<br><br>Preferred Skills<br><br>Leadership and team management skills.<br><br>Strong problem-solving abilities.<br><br>Attention to detail.<br><br>Ability to work under pressure and meet deadlines.<br><br>If you have the required experience and technical expertise in marble works, we would like to hear from you.<br><br>Please send your Cv's on- hr@studiomarmi.com.kw<br><br>Application Question(s)<br><br>Current Salary<br><br>Expected Salary<br><br>Age<br><br>Visa Status<br><br>Work Location: In person<br><br>Building Materials & Supplies<br><br>Basic Details<br><br>salary : 800-850 KWD<br><br>Experience : 2-3 Years<br><br>Location : Shuwaikh , Kuwait<br><br>Qualification : Bachelor<br><br>Posted : 9 days ago<br><br>Job Type : Full-Time<br><br>Company : Studio Marmi<br><br>Posted By: HR Studiomarmi<br><br>Contact Info<br><br>Mobile : +965 55386500<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : hr@studiomarmi.com.kw