Mechanical Engineering Jobs - Capital Governorate (Kuwait) Kuwait

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a Mechanical Superintendent Deep Drilling with extensive drilling equipment maintenance experience for our client in Kuwait. Position Overview: The Mechanical Superintendent Deep Drilling will oversee mechanical maintenance activities for deep drilling land rig operations, ensuring equipment reliability, maintenance efficiency, and safe operations. Key Responsibilities: Maintenance Management: Supervise maintenance and repair activities for all rig mechanical systems. Develop maintenance strategies and schedules to maximize equipment availability. Monitor equipment performance and implement reliability improvement initiatives. Ensure preventive and predictive maintenance programs are effectively executed. Equipment Reliability: Lead troubleshooting and failure analysis activities. Coordinate major equipment overhauls and repairs. Ensure critical spare parts availability and inventory management. Support efforts to reduce non-productive time (NPT). Compliance &amp; Safety: Ensure compliance with company HSE standards and maintenance procedures. Participate in audits, inspections, and incident investigations. Maintain accurate maintenance records and reports. Leadership: Supervise mechanical maintenance teams and contractors. Mentor and develop technical competencies within the team. Coordinate with Rig Managers, OEMs, and service providers.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's Degree or Technical Diploma in Mechanical Engineering or related discipline.</li><li>Minimum 10+ years of drilling equipment maintenance experience.</li><li>At least 3 years in a supervisory or superintendent role.</li><li>Extensive experience supporting deep drilling land rigs (3000HP and above).</li><li>Strong knowledge of drilling equipment maintenance and reliability practices.</li><li>Experience using CMMS systems is preferred.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an experienced and results-driven <strong> HVAC Sales Engineer</strong> to join our growing team in <strong>Kuwait</strong>. The ideal candidate will have a strong background in HVAC project sales and business development, with proven experience selling Air Conditioning systems including <strong>Split AC, Ducted AC, Window AC, VRF/VRV systems</strong>, and related MEP solutions within the <strong>Kuwait/GCC market</strong>.</p><p>This role requires a proactive sales professional who can identify project opportunities, build strong relationships with contractors, consultants, developers, and end-users, and drive sustainable revenue growth.</p><p>Key Responsibilities</p><ul><li><p>Drive sales of Split AC, Window AC, Ducted AC Systems, VRF/VRV Systems, and associated MEP products for projects.</p></li><li><p>Generate new business through market visits, client meetings, networking, and business development activities.</p></li><li><p>Identify potential accounts and develop relationships with MEP contractors, consultants, developers, and project clients.</p></li><li><p>Promote and sell HVAC products along with related MEP solutions based on customer and project requirements.</p></li><li><p>Manage project sales opportunities and actively follow up on leads to achieve monthly and annual sales targets.</p></li><li><p>Build and maintain strong customer relationships to support long-term business growth.</p></li><li><p>Monitor market trends, competitor activities, and emerging project opportunities.</p></li><li><p>Coordinate with engineering, estimation, and project teams to ensure successful project execution and customer satisfaction.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum <strong>2-3 years of Kuwait/GCC experience</strong> in HVAC/AC project sales.</p></li><li><p>Strong experience in selling <strong>Split AC, Window AC, Ducted AC, and VRF/VRV Systems</strong>.</p></li><li><p>Previous experience working with reputed HVAC/AC brands is highly preferred.</p></li><li><p>Engineering background preferred.</p></li><li><p>Proven track record in business development, project sales, and customer relationship management.</p></li><li><p>Strong network with MEP contractors, consultants, developers, and project owners in Kuwait is an advantage.</p></li><li><p>Excellent communication, negotiation, and presentation skills.</p></li><li><p>Ability to work independently and drive sales growth.</p></li><li><p>Valid Kuwait Driving License is preferred.</p></li></ul><p>Preferred Qualifications</p><ul><li><p>Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related engineering field.</p></li><li><p>Experience in project sales of HVAC/AC equipment within the <strong>Kuwait market</strong>.</p></li><li><p>Familiarity with <strong>Kuwait Municipality regulations</strong>, local MEP standards, and HVAC installation practices.</p></li><li><p>Knowledge of project cost estimation, BOQ analysis, tendering, and contract documentation.</p></li><li><p>Experience using CRM software and preparing technical and commercial proposals.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Develop and maintain production schedules based on production requirements &amp; plant capacity to meet customer demands.</p></li><li><p>Identify delays and accordingly adjust schedule to meet deadlines and assist in production risk assessment and mitigation activities.</p></li><li><p>Ability to deal simultaneously with various work orders/products.</p></li><li><p>Collaborate with cross-functional teams, including production, engineering, purchasing, and quality control to ensure timely and efficient production which aligns with production plan.</p></li><li><p>Ensuring resource availability in coordination with associated departments.</p></li><li><p>Assist in employee hiring, training, and performance evaluation.</p></li><li><p>Assist in the development of scheduling tools to increase the level of automation and reduce the manual nature of the scheduling function.</p></li><li><p>Create and maintain production reports, including daily/weekly production reports, inventory reports, scheduling reports, KPI and charts.<br></p></li></ul><p>Skills Required:</p><p>Strong planning, analytical skill &amp; organizational skill, Inventory management, AutoCAD, Assembly procedures, ISO procedures, Lean manufacturing principles, Excellent communication skills, Detail oriented, Microsoft office (Proficient level), Safety procedures, Time study standard, Team attitude, eager to cooperate with others and Problem solving &amp; result oriented.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>BE Mechanical / Electrical/ Production Engineering <br>Minimum 3 Years of experience</p><p></p></section>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions, or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems, and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential Responsibilities</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes, and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems, and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, including pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to lift, carry, and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> <li>Highly desired to have a U.S. passport valid for an additional two years with at least two facing pairs (four total) of blank visa pages.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><span >Mechanical Foreman</span></p><p>One of the Largest Cement Manufacturing ...</p><p>Posted by Mathew International</p><p>Company Logo</p><p>5 - 10 years</p><p>Kuwait</p><p>Posted: 1 day ago</p><p><br></p><p>Job description</p><p>ITI / Diploma in Mechanical Engineering</p><p>5 - 10 years of experience in Maintenance of Cement &amp; Raw Mill, Kiln, Packing Plant &amp; Rotating Equipment.</p><p>Checking the Running Plant observing condition &amp; monitoring.</p><p>Role: Production &amp; Manufacturing - Other</p><p>Industry Type: Building Material (Cement)</p><p>Department: Quality Assurance</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Production &amp; Manufacturing</p><p>Education</p><p>UG: Diploma in ITI</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>ITI / Diploma in Mechanical Engineering</li><li>5 - 10 years of experience in Maintenance of Cement &amp; Raw Mill, Kiln, Packing Plant &amp; Rotating Equipment.</li></ul><p></p></section>

<p><h4>Exceptional hospitality starts with you</h4> <p>Picture yourself brightening someone’s day. When you join our hotels team, that’s exactly what you’ll do every time you come to work! As an assistant chief engineer, you’re not just overseeing physical building and systems maintenance and repairs – you’re spreading the light and warmth of hospitality by delivering memorable experiences that make the stay for every guest.</p> <h4>Here's what you'll do during a typical day:</h4> <ul> <li><strong>Lead and develop a high-performing team:</strong> Recruit, train, supervise, and mentor team members; conduct performance evaluations, provide professional development opportunities, and recognise achievements to build a motivated and high-performing team.</li> <li><strong>Assist chief engineer with managing daily maintenance operations:</strong> Oversee maintenance activities, prioritize tasks, and verify completion through the property maintenance management system; ensure timely resolution of service requests, guest concerns, and emergencies.</li> <li><strong>Ensure safety and compliance:</strong> Oversee the maintenance of the physical building, mechanical systems, electrical systems, HVAC, and life safety systems; coordinate inspections and uphold safety and compliance standards in line with national and local regulations.</li> <li><strong>Assist chief engineer with driving engineering performance:</strong> Monitor departmental key performance indicators (KPIs), including equipment upkeep, audit results, and team productivity, and act as needed to improve performance.</li> <li><strong>Support hotel-wide operational leadership:</strong> Collaborate with the broader hotel leadership team in overseeing evacuation procedures, duty manager coverage, and other safety protocols as needed.</li> <li><strong>Oversee contractor work:</strong> Supervise external contractors and inspect completed work for quality and compliance.</li> <li><strong>Lead energy efficiency initiatives:</strong> Support and oversee property-wide energy conservation programs to reduce utility costs.</li> </ul> <h4>What it takes to make the stay</h4> <p>At Hilton, our core values define what it takes to succeed here and guide the qualities we look for in every team member: a passion for spreading the light and warmth of hospitality; acting with integrity and always doing the right thing; inspiring others through leadership; a belief that teamwork drives the best outcomes; a sense of ownership and accountability; and a focus on the now, bringing urgency and discipline to every moment, knowing it can make a lasting impact.</p> <h4>Join an award-winning workplace culture</h4> <p>At Hilton, we don’t just deliver exceptional experiences for our guests—we build an exceptional workplace for the team members who make it all possible. As a global leader in hospitality, we’ve welcomed more than 3 billion guests worldwide, all while staying true to our founding vision: to fill the earth with the light and warmth of hospitality.</p> <p>Our award-winning culture has earned us repeated recognition on the world’s best workplaces list by Great Place to Work and Fortune. With our suite of world-class brands and a company-wide commitment to providing the best stay for every guest, we’re setting new standards for the future of travel.</p> <p>Whether you’re starting your career or exploring something new, Hilton supports your journey every step of the way. Come for the job, stay for the career—and help us make every stay a little more magical.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The C-12/King Air Army Transport Aircraft Mechanic (FAA A&amp;P) services, repairs and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components. A valid (FAA) A&amp;P Airframe and Powerplant Certificate is Required. Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required. US Citizenship is Required to obtain a US Govt Secret Security Clearance, and for facility access. Operationally checks repaired or modified systems for proper operation. Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment. Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Examine engines for oil leaks and listens to operating engine to detect and diagnose malfunctions. Inspect turbine blades to detect cracks or breaks. Test engine operation, using troubleshooting procedures and diagnostic test equipment, to identify source of malfunction. Replace or repair worn or damaged components using hand tools, gauges, and test equipment. Remove and install engine from aircraft. Disassemble and inspect parts for wear, warping, or other defects. Repair or replace defective engine parts and reassembles and installs engine in aircraft. Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes. May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition. Knowledge of aircraft sub-systems, including maintenance parameter, systems operation, limitations, and technical orders. Ability to become qualified and perform engine runs for the aircraft type they are assigned to support. Ability to read, write, and interpret technical duties is required. Ability to communicate effectively with all levels of employees throughout the organization. May specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies. Perform other qualified duties as assigned. Minimum Requirements High school diploma or GED equivalent is Required. A valid (FAA) A&amp;P Certificate is Required. Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required. Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired. Recent full-time experience in aviation maintenance, on the C-12/King Air Turbo-prop aircraft during the past 12 months is Required. Six (6) months of flight line and overhaul &amp; inspection experience is preferred. Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit. Mechanic Tools/Toolbox Required; mechanics must provide their own shadowed toolbox with each tool etched with PID. *(Company will ship toolbox to Kuwait). A valid US Passport - is Required for deployment/travel to Kuwait; Passport must have a minimum of 18 months remaining before expiration date, must be able to obtain Kuwait Visa. Must be able to pass and clear CENTCOM (CRC) Deployment Training and Army MOD17 Medical for Deployment. Ability to clear the Army MOD 17 Medical is required for Deployment to Kuwait, will occur while attending CRC (DIDC) deployment training. May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations. (AR95-20) Mechanic Pre-employment Medical Requirements: Medical/Physical. All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years. Security Clearance Requirements: Must be able to obtain and maintain a US Govt Secret Security Clearance. Must be able to obtain and maintain facility credentials and authorization. US Citizenship is Required to hold a US Govt Secret Clearance, and facility credentials and authorization to work at this facility. Physical and Additional Qualifications Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit. Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs, ramps, ladders and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to carry, push or pull up to and may exceed 50 pounds. May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet. May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools. Must be able to type using a standard keyboard to communicate through e-mail and various software applications. Must be able to distinguish color and judge three dimensional depths. May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc. Must have minimum 20/100 near and far vision, correctable to 20/20. Must be capable of living and working in a potentially hostile environment for an extended period. May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>A valid (FAA) A&amp;P Airframe and Powerplant Certificate is Required.</li><li>Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required.</li><li>US Citizenship is Required to obtain a US Govt Secret Security Clearance, and for facility access.</li><li>High school diploma or GED equivalent is Required.</li><li>Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</li><li>Recent full-time experience in aviation maintenance, on the C-12/King Air Turbo-prop aircraft during the past 12 months is Required.</li><li>Six (6) months of flight line and overhaul &amp; inspection experience is preferred.</li><li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li><li>Mechanic Tools/Toolbox Required; mechanics must provide their own shadowed toolbox with each tool etched with PID.</li><li>A valid US Passport - is Required for deployment/travel to Kuwait; Passport must have a minimum of 18 months remaining before expiration date, must be able to obtain Kuwait Visa.</li><li>Must be able to pass and clear CENTCOM (CRC) Deployment Training and Army MOD17 Medical for Deployment.</li><li>Ability to clear the Army MOD 17 Medical is required for Deployment to Kuwait, will occur while attending CRC (DIDC) deployment training.</li><li>May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations.</li><li>Medical/Physical: All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years.</li><li>Must be able to obtain and maintain a US Govt Secret Security Clearance.</li><li>Must be able to obtain and maintain facility credentials and authorization.</li><li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to carry, push or pull up to and may exceed 50 pounds.</li><li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet.</li><li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Must be able to distinguish color and judge three dimensional depths.</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li><li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li><li>Must be capable of living and working in a potentially hostile environment for an extended period.</li><li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a dynamic and result-oriented Fire protection Engineer to drive business growth for our Fire Protection and Fire &amp; Gas (F&amp;G) Engineering Consultancy services. The successful candidate will be responsible for identifying new business opportunities, developing client relationships, preparing technical and commercial proposals, and converting opportunities into awarded projects across the Oil &amp; Gas, Petrochemical, Industrial, Power, Infrastructure, and Commercial sectors.</p><p>Identify and develop new business opportunities for Fire Protection and Fire &amp; Gas Engineering Consultancy services.</p><p>Develop and maintain a database of End Clients, EPC Contractors, PMC Consultants, and Industrial Customers.</p><p>Generate qualified leads through market research, networking, industry events, and client engagement.</p><p>Build strong relationships with key decision-makers within client organizations.</p><p>Conduct client meetings to understand project requirements and identify engineering consultancy opportunities.</p><p>Deliver technical and business presentations showcasing the company's capabilities and value proposition.</p><p>Coordinate with the engineering team to develop technical solutions and commercial proposals.</p><p>Prepare, submit, and negotiate technical and commercial proposals.</p><p>Follow up on submitted proposals and actively drive opportunities through to Purchase Order (PO) award.</p><p>Maintain an opportunity pipeline and provide regular sales forecasts and progress reports.</p><p>Monitor market trends, competitor activities, and upcoming projects.</p><p>Support prequalification submissions, vendor registrations, and framework agreements.</p><p>Participate in exhibitions, conferences, and industry networking events to enhance business visibility.</p><p>Business Development</p><p>Technical Sales</p><p>Client Relationship Management</p><p>Proposal Preparation</p><p>Lead Generation</p><p>Tender Management</p><p>Presentation Skills</p><p>Negotiation Skills</p><p>Market Intelligence</p><p>Strategic Planning</p><p>Number of new clients developed.</p><p>Number of qualified opportunities generated.</p><p>Value of proposals submitted.</p><p>Proposal-to-order conversion rate.</p><p>Annual sales/revenue achieved.</p><p>Customer satisfaction and retention.</p><p>Growth of key accounts and repeat business.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's Degree in Mechanical, Fire Protection, Instrumentation, Electrical Engineering, or a related discipline.</li><li>10+ years of experience in business development, sales, or technical marketing within Fire Protection, Fire &amp; Gas Consultancy.</li><li>Experience in Oil &amp; Gas, Petrochemical, Industrial, Power, Infrastructure, or Commercial projects.</li><li>Knowledge of Fire Protection Systems, Fire Detection &amp; Alarm Systems, Gas Detection Systems, Passive Fire Protection.</li><li>Experience in the field of Sales and business development in Fire Protection and Fire &amp; Gas detection system Vendors in Kuwait</li><li>Familiarity with NFPA, API, IEC, FM, ISO, and client standards (e.g., KNPC, KOC and Other industrial clients) is an advantage.</li><li>Proven experience in proposal preparation, client presentations, and contract negotiations.</li><li>Excellent communication, presentation, negotiation, and interpersonal skills.</li><li>Proficiency in Microsoft Office (Word, Excel, PowerPoint, Outlook);</li><li>Valid Kuwait driving license is preferred.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><br></p> <p> </p> <p> <b>What You Will Do :</b> </p> <p>The Dimensional Test Equipment (DTE) / Automatic Test Equipment (ATE) Engineer</p> <p>As the principal authority for the support and maintenance of the contractor supplied</p> <p>PATRIOT depot test stations, except for General Electric Test Set, the ATE engineer shall:</p> <p>1. assist with determining operating ability of all contractor test equipment</p> <p>2. verify that all test station manuals, test procedures, test software, fixtures, and Units</p> <p>Under Test (UUT) are the correct configuration</p> <p>3. assist in isolating problems between test station hardware, software, and UUT</p> <p>4. assist and resolve test station software problems at system and UUT level</p> <p>5. provide direct interface with contractor test personnel when additional testing</p> <p>experience is required</p> <p>6. coordinate training with KAD Depot trained technicians</p> <p>7. schedule both informal classroom and practical exercise training activities that refresh previous depot training lessons</p> <p> </p> <p>The DTE/ATE support personnel provide the technical operating knowledge, electrically and mechanically, as well as extensive practical experience to effectively operate, maintain and provide self-sufficiency training to the in-country support personnel. The DTE specialist will provide hands-on maintenance support and operational training on the repair of the Radar transmitter Battery Replaceable Units (BRU s). Systems are computer driven and training will consist of both electronic and mechanical repair for the units under test. Working under a Patriot Test Station Lead, this position will require hands-on operation, maintenance and sustainment of the PAT 243 and PAT 247 Patriot test stations in support of Patriot Configuration 3+ systems. This will include operating troubleshooting and sustaining the coolant oil processing unit and Radar coolant group to ensure oil flow and glycol resistivity requirements are met for system unit operation. This will also include sustaining and troubleshooting converters, inverters and electric circuit s assembly for the transmission system, by tracking signals and measuring voltage, current and resistance measurements to isolate problems to the component level on the Pat 247 test station. Functionally verifies the operational condition of the PAT 243, 244 and PAT 247 test stations to verify operational status. Demonstrates proper maintenance, sustainment, repair procedures and techniques. Participates in on-the job training programs. Prepares, fills out and submits maintenance reports, system problem reports (SPR s) and performs other duties as directed.</p> <p> </p> <p> <b>This position is located in Kuwait.</b> </p> <p> </p> <p> </p> <p> <b> Qualifications You Must Have :</b> </p> <p>Must have four (4) years of demonstrated knowledge and experience in the operation, maintenance and sustainment of Dimensional Test Equipment (DTE) Station equipment and for testing, troubleshooting and repairing Patriot electronics Assemblies and Subassemblies to the component level, or equivalent test stations. Experienced in reading and understanding engineering drawings, schematics, books, technical documents and PC software. Demonstrated skills in using general tools and general use commercial test equipment, also in replacing component parts on circuit card assemblies. Must be able to work in extreme desert environments and lift 50 pounds. Must have a good understanding of standard industrial test equipment such as digital volt meters, high voltage probes, power meters, spectrum analyzers, frequency counters and oscilloscopes. A Secret Security Clearance is required.</p> <p> </p> <p> <b>Qualifications We Prefer:</b> </p> <p>A minimum of 6 to 8 years hands on knowledge and experience operating, maintaining and sustaining PAT 243, and PAT 244 test stations or equivalent test stations. Demonstrated experience working on Configuration 3 system assemblies and subassemblies. Experience working in and with a Middle East customer directly. Knowledge and experience in maintaining and sustaining DTE test station equipment.</p> <p> </p> <p> <b>Required Education:</b> </p> <p> </p> <p>Bachelor's degree in related field and 8-12 years of related experience. </p> <p> </p> <p><br></p></div></section>

<p>About the Role: We are seeking a competent Site Engineer specializing in civil pipeline works for marine GRP (Glass Reinforced Plastic) pipe installations. The ideal candidate will be responsible for supervising the installation, testing, and commissioning of GRP pipelines in marine and offshore environments, ensuring compliance with project specifications, international standards, and safety requirements. Key Responsibilities: • Supervise and coordinate daily pipeline installation activities including trenching, pipe laying, jointing, lamination, and backfilling for marine GRP pipelines • Ensure all GRP pipe installation works comply with approved drawings, method statements, specifications, and international standards (ISO 14692, AWWA M45) • Monitor trench excavation, dewatering, pipe bedding, and backfilling operations in accordance with project requirements • Supervise GRP pipe jointing and lamination procedures including adhesive bonding, coupling installation, and flange bolting • Coordinate with survey teams for pipeline route alignment, setting out, and as-built verification • Conduct site inspections and quality checks to verify adherence to specifications, safety regulations, and environmental standards • Review and interpret isometric drawings, spool drawings, and pipeline alignment sheets • Prepare and submit inspection requests (RFIs), method statements, and risk assessments • Monitor material deliveries including GRP pipes, fittings, couplings, and consumables; ensure proper handling and storage • Liaise with clients, consultants, subcontractors, and QAQC teams for inspections and approvals • Maintain accurate daily records including progress reports, manpower, equipment usage, and material consumption • Enforce HSE protocols including permits, toolbox talks, PPE compliance, and emergency procedures • Assist in pre-commissioning and commissioning activities including hydrotesting, flushing, and pressure testing • Prepare test packs and maintain documentation for pipeline testing and handover • Report delays, technical issues, or incidents to the Project Manager or Construction Manager • Provide technical guidance to site supervisors, foremen, and pipeline installation crews</p><p>Qualifications & Experience: Bachelor's degree in Civil Engineering, Mechanical Engineering, or related field Minimum 5+ years of experience in pipeline installation, with specific experience in GRP/FRP piping for marine or offshore projects Strong knowledge of GRP pipe materials, jointing methods (adhesive bonded, coupling), and lamination procedures Familiarity with international standards including ISO 14692 (GRP piping for offshore applications) and AWWA M45 • Experience with marine pipeline installation methods including trenching, floating installation, or underwater pull-in • Proficiency in MS Office, AutoCAD, and project management software • Knowledge of hydrotesting, pressure testing, and pipeline commissioning procedures • Valid safety certifications (NEBOSH, IOSH, OSHA) preferred • Offshore survival certificates (BOSIET/HUET) if required • Fluency in English; Arabic or Hindi/Urdu is a plus Required Skills: • Strong technical knowledge of GRP pipeline installation in marine environments • Excellent supervision and coordination abilities • Attention to detail for quality and compliance • Good communication and report writing skills • Problem-solving for site and technical issues • Ability to work under pressure and meet project deadlines • Team collaboration with site staff, subcontractors, and management</p>

<p>About the Role: We are seeking a competent Site Engineer specializing in civil pipeline works for marine GRP (Glass Reinforced Plastic) pipe installations. The ideal candidate will be responsible for supervising the installation, testing, and commissioning of GRP pipelines in marine and offshore environments, ensuring compliance with project specifications, international standards, and safety requirements. Key Responsibilities: • Supervise and coordinate daily pipeline installation activities including trenching, pipe laying, jointing, lamination, and backfilling for marine GRP pipelines • Ensure all GRP pipe installation works comply with approved drawings, method statements, specifications, and international standards (ISO 14692, AWWA M45) • Monitor trench excavation, dewatering, pipe bedding, and backfilling operations in accordance with project requirements • Supervise GRP pipe jointing and lamination procedures including adhesive bonding, coupling installation, and flange bolting • Coordinate with survey teams for pipeline route alignment, setting out, and as-built verification • Conduct site inspections and quality checks to verify adherence to specifications, safety regulations, and environmental standards • Review and interpret isometric drawings, spool drawings, and pipeline alignment sheets • Prepare and submit inspection requests (RFIs), method statements, and risk assessments • Monitor material deliveries including GRP pipes, fittings, couplings, and consumables; ensure proper handling and storage • Liaise with clients, consultants, subcontractors, and QAQC teams for inspections and approvals • Maintain accurate daily records including progress reports, manpower, equipment usage, and material consumption • Enforce HSE protocols including permits, toolbox talks, PPE compliance, and emergency procedures • Assist in pre-commissioning and commissioning activities including hydrotesting, flushing, and pressure testing • Prepare test packs and maintain documentation for pipeline testing and handover • Report delays, technical issues, or incidents to the Project Manager or Construction Manager • Provide technical guidance to site supervisors, foremen, and pipeline installation crews</p><p>Qualifications & Experience: Bachelor's degree in Civil Engineering, Mechanical Engineering, or related field Minimum 5+ years of experience in pipeline installation, with specific experience in GRP/FRP piping for marine or offshore projects Strong knowledge of GRP pipe materials, jointing methods (adhesive bonded, coupling), and lamination procedures Familiarity with international standards including ISO 14692 (GRP piping for offshore applications) and AWWA M45 • Experience with marine pipeline installation methods including trenching, floating installation, or underwater pull-in • Proficiency in MS Office, AutoCAD, and project management software • Knowledge of hydrotesting, pressure testing, and pipeline commissioning procedures • Valid safety certifications (NEBOSH, IOSH, OSHA) preferred • Offshore survival certificates (BOSIET/HUET) if required • Fluency in English; Arabic or Hindi/Urdu is a plus Required Skills: • Strong technical knowledge of GRP pipeline installation in marine environments • Excellent supervision and coordination abilities • Attention to detail for quality and compliance • Good communication and report writing skills • Problem-solving for site and technical issues • Ability to work under pressure and meet project deadlines • Team collaboration with site staff, subcontractors, and management</p>

<p><h4>Division / Project</h4> <p>KBR’s Sustainable Technology Solutions (STS) group is looking for a Quality Assurance & Quality Control Engineer for a 5-year PMC contract for the supply of programme management services with Kuwait Oil Company. The contract serves to support KOC to achieve its objectives of reaching optimum capacity in its oilfields and enhancing its facilities by the most efficient and economical means available.</p> <p>The contract aims to provide project management, coordination, planning, design, engineering, construction management, contracting, procurement, project controls, and other services for construction of new oil field facilities, upgrading of existing facilities, and transfer of technology.</p> <h4>Primary Objectives</h4> <p>Facilitate the development and effective implementation of Project Quality Management Systems by the Project Team in a manner that meets corporate, location, and contractual requirements.</p> <p>Manage project service and product verification and inspection consistent with criticality assessments and contractual and regulatory obligations.</p> <p>Manage project quality support functions including quality planning, preventive action, non-conformance control, corrective action, audits, and project quality reporting and review.</p> <h4>Qualifications including Required Education, Experience, & Skills</h4> <ul> <li>Bachelor’s degree in engineering</li> <li>8 years industry experience</li> <li>5 years post-graduation experience in oil and gas projects</li> <li>3 years post-graduation experience in the same designation</li> <li>Thorough understanding of the principles and practice of quality management and the implementation and improvement of management systems</li> <li>Practical experience of plant and vendor inspection of all types of mechanical equipment typically required at oil and gas installations, both onshore and offshore</li> <li>Ability to develop, maintain, and update in-house technical standards and specifications</li> <li>Communication skills – verbal and written – to report standards and presentation skills</li> <li>Demonstrable capabilities in planning and organising projects and activities to meet project requirements, e.g., quality planning and resourcing for projects to ensure they are suitably resourced with sufficient and capable quality management expertise</li> <li>Experience in managing a team of quality practitioners</li> <li>Familiarity with ISO 9000 and 14000 series and international standards relevant to the oil and gas industry</li> <li>Fully conversant with NDE requirements and sour environments</li> <li>Eligible for auditor registration or equivalent</li> </ul> <h4>Responsibilities</h4> <p>Work with the HSE / QA QC Manager and the Project Management Team to ensure:</p> <ul> <li>Project Management Plans and dependent systems and procedures are developed and implemented in compliance with the requirements of the WorleyParsons Project Management Process (WPMP) and Enterprise Management System (EMS), consistent with specific location, regulatory, and contractual requirements</li> <li>Project personnel are suitably trained in project plan requirements and to access and apply dependent systems, procedures, and reference materials</li> <li>Effectiveness of quality planning to ensure that process controls and prerequisite product and service verification and inspection arrangements are established and resourced for the project consistent with criticality, statutory, and contractual obligations</li> <li>Effective planning and implementation of design control, verification, validation, and review activities</li> <li>Effective implementation and coordination of vendor assessment and inspection activities</li> <li>Effective implementation and verification of construction inspection and testing activities</li> <li>Effective implementation of non-conformance, corrective action, and preventive action management processes</li> <li>Establishment of an effective risk-based audit program</li> <li>Effectiveness of Project Management Review Programs including collection, analysis, and reporting of project performance measures</li> <li>Participation in the global quality learning community initiative to enable quality professionals to communicate with each other and receive updates on latest developments</li> <li>Facilitation of the implementation of existing and new company processes and capability enhancements across the Project Operations</li> <li>Facilitation of independent review/certification of Project Quality Management Systems in line with company and customer requirements</li> <li>Ensure that the customer’s quality management requirements and concerns and the needs of multiple stakeholders are being identified and managed by the Project Team effectively</li> </ul> <h4>Decarbonization – Energy Transition – Sustainability</h4> <p>Belong. Connect. Grow. with KBR!</p></p><p></p>

<p><h4>Division / Project</h4> <p>KBR’s Sustainable Technology Solutions (STS) group is looking for a Lead Quality Assurance & Quality Control Engineer for a 5-year PMC contract for the supply of Programme Management services with Kuwait Oil Company. The contract serves to support KOC to achieve its objectives of reaching optimum capacity in its oilfields and enhancing its facilities by the most efficient and economical means available.</p> <p>The contract aims to provide project management, coordination, planning, design, engineering, construction management, contracting, procurement, project controls, and other services for construction of new oil field facilities, upgrading of existing facilities, and transfer of technology.</p> <h4>Primary Objectives</h4> <p>Facilitate the development and effective implementation of Project Quality Management Systems by the Project Team in a manner that meets corporate, location, and contractual requirements.<br> Manage project service and product verification and inspection consistent with criticality assessments and contractual and regulatory obligations.<br> Manage project quality support functions including quality planning, preventive action, non-conformance control, corrective action, audits, and project quality reporting and review.</p> <h4>Qualifications including Required Education, Experience, & Skills</h4> <ul> <li>Bachelor in Engineering Degree</li> <li>12 years total post graduation experience</li> <li>8 years post graduation experience in oil and gas projects</li> <li>5 years post graduation experience in same designation</li> <li>Thorough understanding of the principles and practice of Quality Management and the implementation and improvement of management systems</li> <li>Practical experience of plant and vendor inspection of all types of mechanical equipment typically required at oil & gas installations, both onshore and offshore</li> <li>Ability to develop, maintain, and update in-house technical standards and specifications</li> <li>Communication skills – verbal and written – to report standards and presentation skills</li> <li>Demonstrable capabilities in planning and organizing projects and activities to meet project requirements, e.g. quality planning and resourcing for projects to ensure they are suitably resourced with sufficient and capable quality management expertise</li> <li>Experience in managing a team of quality practitioners</li> <li>Fully conversant with NDE requirements and sour environments</li> <li>Excellent written, coordination, and verbal communication skills</li> <li>Familiarity with ISO 9000 and 14000 Series and international standards relevant to oil and gas industry</li> </ul> <h4>Responsibilities</h4> <p>Work with the HSE / QA QC Manager and the Project Management Team to ensure:</p> <ul> <li>Project Management Plans and dependent systems and procedures are developed and implemented in compliance with the requirements of the WorleyParsons Project Management Process (WPMP) and Enterprise Management System (EMS) consistent with specific location, regulatory, and contractual requirements</li> <li>Project personnel are suitably trained in project plan requirements and to access and apply dependent systems, procedures, and reference materials</li> <li>Effectiveness of quality planning to ensure that process controls and prerequisite product and service verification and inspection arrangements are established and resourced for the project consistent with criticality, statutory, and contractual obligations</li> <li>Effective planning and implementation of design control, verification, validation, and review activities</li> <li>Effective implementation and coordination of vendor assessment and inspection activities</li> <li>Effective implementation and verification of construction inspection and testing activities</li> <li>Effective implementation of non-conformance, corrective action, and preventive action management processes</li> <li>Establishment of an effective risk-based audit program</li> <li>Effectiveness of Project Management Review Programs including collection, analysis, and reporting of project performance measures</li> <li>Participation in the global quality learning community initiative to enable quality professionals to communicate with each other and receive updates on latest developments</li> <li>Facilitation of the implementation of existing and new company processes and capability enhancements across the Project Operations</li> <li>Facilitation of independent review/certification of Project Quality Management Systems in line with company and customer requirements</li> <li>Ensuring that the customer’s quality management requirements and concerns and the needs of multiple stakeholders are identified and managed by the Project Team effectively</li> </ul> <h4>Decarbonization – Energy Transition – Sustainability</h4> <p>Belong. Connect. Grow.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Walk-in for Civil Engineer with 10-12 years of experience in Oil &amp; Gas Industries. Minimum 3 years of experience in Middle East Oil &amp; Gas Construction Project is a must.</p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an Assistant Resident Engineer to join our team for an exciting port project in Kuwait. In this role, you will be responsible for supporting the Resident Engineer in overseeing project management, construction management, and supervision services for a major port project. Assist in managing day-to-day project activities, ensuring adherence to schedules, budgets, and quality standards Conduct regular site inspections and monitor construction progress Collaborate with all project stakeholders to resolve technical issues and ensure project compliance Support the Resident Engineer in coordinating with local authorities and regulatory bodies Participate in project meetings and contribute to decision-making processes Ensure compliance with safety regulations and environmental standards Assist in quality control and quality assurance activities throughout the project lifecycle Monitor and report on project risks, recommending mitigation strategies as needed</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree in Civil Engineering or related field Minimum of 12 years of experience in civil engineering, preferably in port projects or marine construction Strong knowledge of project management principles and construction management techniques Excellent skills in Microsoft Office Suite, including Project and Excel Strong analytical and problem-solving skills Excellent organizational and time management abilities Effective communication and interpersonal skills Ability to work in a multicultural environment Willingness to relocate to Kuwait for the duration of the project</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Safety Engineer with 10 Years experience in Construction / infrastructure development projects. Preferably experience in Airport, Highway, Roads etc. Must be well knowledge of safety measures in Gulf.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Engineering graduate with minimum 10 Years experience in infrastructure development construction. Good communication skill. Site management, training.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a highly skilled Data Engineer to join our growing team in Kuwait. In this role, you will be responsible for designing, building, and maintaining scalable data pipelines and infrastructure that empower data-driven decision-making across the entire organization. You will work with cutting-edge technologies and collaborate closely with data scientists, analysts, and business stakeholders to unlock the full potential of our data assets.</p><p>The purpose of this role is to architect, develop, and manage robust data pipelines and infrastructure that ensure high availability, quality, and performance of data systems. The Data Engineer will enable seamless data flow, optimize storage and processing costs, reduce latency, and empower business teams with self-service analytics capabilities to drive informed decision-making across the organization in Kuwait.</p><p>Build reliable ETL/ELT data pipelines</p><p>Ensure 99.9% data availability and quality</p><p>Optimize data warehouse performance and cost</p><p>Reduce data processing latency by 30%</p><p>Enable self-service analytics for business teams</p><p>Design and implement scalable data architectures</p><p>Monitor and maintain data pipeline health and reliability</p><p>Collaborate with cross-functional teams to understand data requirements</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>SQL</li><li>Python</li><li>Apache Spark</li><li>Apache Kafka</li><li>Airflow</li><li>AWS/GCP/Azure</li><li>Snowflake/BigQuery/Redshift</li><li>Docker/Kubernetes</li><li>Git</li><li>Data modeling</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Production Optimization Engineer is responsible for assisting in delivery of safe, efficient, and reliable products and services to our customers. The job consults with operations groups as needed to support the area of expertise and identifies opportunities for continuous improvement of product and service delivery and formally communicates findings. The Production Optimization Engineer actively participates in promoting new technology and services offerings and supports the PL in risk management and applying lessons learned to improve job design and execution as related to the area of expertise. They provide real-time support to operations as required. Provide technical support in the area of expertise throughout the Sales and Product and Service Delivery process. Assist as required with the development of technical job designs for PLs. Assist with identifying areas where new and cost effective techniques can be applied. Explore opportunities for value-added products and services. Consult with Design/Technical Engineer role as required to optimize the technical design. Assist in real-time incident response, recovery, and investigation as related to the area of expertise. Assist in evaluating technical viability and overall appraisal of tenders as related to the area of expertise. Remain current on new technologies. Maintain customer visibility through active participation in professional society activities and calls for papers. Understand the competition s technical offering. Participate in external technical societies and communities. Contribute, write and review technical publications. Engage with local universities, Customer institutes and research organizations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><br></p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Process Engineer shall monitor and check all Contractor requisitions, work packages, risk and method statements etc. to ensure optimized work processes. Witness and verify compliance with the design specification including oversight of construction and Commissioning to ensure QHSE standards are maintained. In addition he shall provide on the job training to his client counterpart. The suitable candidate should have minimum of 12 years of relevant process experience within the Oil &amp; Gas industry together with a minimum of 10 years' experience in the design and construction of onshore plants. The ideal candidate shall be familiar with industry standard codes and construction practices. Will perform liaison duties between client and Contractor.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>12+ Years experience required</p><p>Candidate available immediately within Kuwait preferred</p><p></p></section>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will supervise, perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply advanced technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Craftsman.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic and advanced technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to acquire and maintain SCR task(s) for position, as required (MQ-9 Engine Run, Flex Borescope, etc.)</li> <li>Must be able to work without supervision.</li> <li>Provides technical and directional leadership guidance to lower-level Aircraft Mechanics.</li> <li>Provides training to lower-level Aircraft Mechanics.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of five years of actual aircraft mechanic maintenance experience required.</li> <li>Minimum of two years’ experience on MQ-9 aircraft, as aircraft mechanic.</li> <li>Must have advanced knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess advanced knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have an advanced understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>