Materials Engineer Jobs

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis. Conduct the training and examination on all NDT methods to certify and to re- certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189. Determine test method and prepare fluids and parts for nondestructive inspection. Interpret nondestructive inspection test results and provide information about defects to repair center. Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action. Establish radiation areas for radiographic operations. Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data. Perform nondestructive inspection on structures, components, and systems. Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment. Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors. Operate, maintain, and inspect nondestructive equipment. Perform operator maintenance and service inspections on shop equipment and tools. Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment. Perform silver recovery functions. Handle and dispose of hazardous waste and materials Perform other qualified duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li><li>Three (3) years experience as a Non Destructive Inspection (NDI).</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li><li>Capable of assuming technical responsibility for the NDT facility and staff.</li><li>Capable of selecting the method and technique for a specific inspection.</li><li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li><li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li><li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b><u>Function:</u> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</b></p><p>The Senior QA/QC Officer is responsible for overseeing and maintaining the Quality Assurance and Quality Control(QA/QC) systems across all operational units and the Head Office. The role ensures that food products, processes, facilities and documentation comply with company standards, food safety regulations, customer requirements, and applicable quality management systems. The position serves as a key link between operations, productions, procurement and management to promote continuous improvement in food quality and safety.</p><p><br></p><p><b><u>Primary Duties &amp; responsibilities include but not limited to:</u></b></p><p><b>Quality Assurance &amp; Food Safety Management</b></p><ul><li>Implement, maintain, and continuously improve the company's Quality Management System (QMS) and Food Safety Management System (FSMS). </li><li>Ensure compliance with HACCP, GMP, GHP, food safety regulations, and company quality standards. </li><li>Develop, review, and update quality procedures, work instructions, policies, and records. </li><li>Monitor the effectiveness of food safety and quality programs across all operational locations.</li></ul><p><b>Quality Control Operations</b></p><ul><li>Oversee product inspections, process monitoring, and quality verification activities. </li><li>Ensure raw materials, packaging materials, and finished products meet established specifications. </li><li>Review and verify quality control records, inspection reports, and test results. </li><li>Investigate quality issues and implement corrective and preventive actions (CAPA).</li></ul><p><b>Head Office Responsibilities</b></p><ul><li>Maintain centralized QA/QC documentation and records. </li><li>Prepare quality reports, KPI dashboards, and management review presentations. </li><li>Coordinate quality-related communications between Head Office and operational sites. </li><li>Monitor compliance status and follow up on corrective actions across all branches or facilities. </li><li>Support management in developing quality objectives and improvement initiatives.</li></ul><p><b>Audits &amp; Compliance</b></p><ul><li>Plan and conduct internal quality and food safety audits. </li><li>Assist in regulatory inspections, customer audits, and third-party certification audits. </li><li>Ensure timely closure of audit findings and non-conformities. </li><li>Monitor compliance with local food regulations and certification requirements.</li></ul><p><b>Training &amp; Development</b></p><ul><li>Conduct quality and food safety training for employees. </li><li>Promote awareness of hygiene, sanitation, food safety, and quality standards. </li><li>Coach operational teams on best practices and compliance requirements.</li></ul><p><b>Supplier Quality Management</b></p><ul><li>Assist in supplier evaluation and approval processes. </li><li>Monitor supplier performance and quality compliance. </li><li>Investigate supplier-related quality issues and coordinate corrective actions. </li></ul><p><b>Continuous Improvement</b></p><ul><li>Analyze quality trends, complaints, audit findings, and non-conformance data. </li><li>Recommend process improvements to enhance product quality, food safety, and operational efficiency. </li><li>Participate in new product development and process validation activities as required.</li><li>Travel regionally as required to conduct audits and ensure standardization across all locations.</li><li>Perform any additional duties assigned by the Direct Manager.</li></ul><p>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b><u>Skills:</u></b></p><ul><li>Strong analytical and problem-solving skills.</li><li>Excellent communication and report-writing abilities.</li><li>Leadership and team coordination skills.</li><li>Attention to detail and organizational skills.</li><li>Ability to work independently and manage multiple priorities.</li><li>Knowledge of food manufacturing, catering, retail food operations, or central kitchen operations (as applicable).</li></ul><p><br></p><p><b><u>Qualifications:</u></b></p><ul><li>Bachelor's Degree in Food Science, Food Technology, Microbiology, Quality Management, or a related field.</li><li>Minimum 3–5 years of experience in QA/QC within the food industry.</li><li>Strong knowledge of HACCP, GMP, GHP, ISO 22000, and food safety regulations.</li><li>Experience in conducting internal audits and managing corrective actions.</li><li>Proficiency in Microsoft Office applications and quality documentation systems.</li></ul></div>

<p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p><p>The Aviation Support Equipment Technician diagnoses malfunctions repairs and maintains Support Equipment (SE); inspects and approves completed maintenance actions; troubleshoots discrepancies by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and historical maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs SE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on SE by inspecting, testing and operating SE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components, as well as stenciling and marking SE, storing, handling, labelling, using and disposing of hazardous materials and hazardous waste. The Technician prepares SE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles, to include Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety awareness.</p><p>Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify/inspect work performed by other technicians for which he/she is qualified to perform. Reviews, interprets, and applies maintenance procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Performs O , I and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals. Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications. Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins. Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. and performs proper handling and disposal of chemicals and petroleum products required during maintenance. Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system. Performs close tolerance adjustment, repair and rework of equipment in and out of shop area. Services, inspects and tests aviation support equipment used for direct and indirect aircraft support. Troubleshoots, inspects, services, tests and re-conditions storage batteries, to include lead-acid, gel and sealed type. Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE). Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment. Conducts off station maintenance when required. When necessary, perform other duties and functions critical to the support of the program.</p><p>Uses digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, diagnosing software, circuit card testers, transistor testers, and hand tools to analyze, diagnose, and repair applicable Support Equipment.</p><p>Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required.</p><p>The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High School Diploma</li><li>Must be able to obtain/maintain the following required certifications/qualifications: Applicable Support Equipment licensing: I Level &amp; O Level Tire &amp; Wheel certification Hydraulic Contamination certification Collateral Duty Inspector (CDI) qualification Corrosion Prevention and Control and Aircraft Paint qualification I Level Battery Maintenance certification</li><li>Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted.</li><li>Naval Aviation Maintenance Program (NAMP) 4790.2 or equivalent experience with Air Force Instruction 21-101 preferred.</li><li>Must have a working knowledge of first aid procedures to be used in an emergency.</li><li>Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures).</li><li>This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance.</li><li>Must be United States (U.S.) citizen, be able to read, write, and understand the English language</li><li>Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration.</li><li>Must have a valid U.S. Driver s License.</li><li>Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements.</li><li>Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc ) as required by local policies.</li><li>Must be willing and able to comply with all program functional requirements to include but not limited to: The performance of I Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp; MLG Tire re-building, MLG Brake repair/rebuilding, Battery maintenance support, and Oxygen Regulator testing/repair.</li><li>Must be willing and able to deploy off-site as required to support Kuwait Air Force operations.</li><li>Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required.</li><li>Must have the ability to communicate clearly, concisely and follow instructions when directed on assigned tasks.</li><li>Have a strong knowledge base of intermediate level maintenance business practices and procedures</li><li>Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions.</li><li>As a Subject Matter Expert, must be willing to perform in-depth research, troubleshoot, and perform O level, I level, and commercial level maintenance functions on all applicable SE systems and components necessary to return equipment to a Ready for Issue (RFI) status; this includes determining material requirements, researching part numbers, ordering, tracking, and receiving materials as required to facilitate SE inspections/repairs.</li><li>Must be able to communicate directly with the customer, pilots, air crew members, management, and maintenance personnel to gather and relay pertinent data/information necessary to ensure equipment is available to support aircraft launches and maintenance.</li><li>Must have an in-depth knowledge of applicable technical orders/job guides/publications read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications.</li><li>Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations.</li><li>Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations.</li><li>Must perform as a team member, contributing to the success of the KC-130J / Common Support Equipment (CSE) Program.</li><li>Must be willing and able to work with hazardous materials and conduct specialty on-the-job training.</li><li>Must be dependable and timely in managing assigned tasks, perform consistent quality maintenance.</li><li>Must have a proven ability to work independently with minimal direction.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a dynamic Sales and Marketing Supervisor to join our innovative team in the food manufacturing sector. This role is pivotal in driving sales strategies and marketing initiatives that resonate with our clients and elevate our brand presence in the marketplace. As a key player in our organization, you will have the opportunity to influence our growth trajectory while collaborating with a team that values creativity and strategic thinking.</p><p>In this position, you will not only manage day-to-day sales operations but also engage in market analysis to identify emerging trends and customer needs. You will be responsible for developing targeted marketing campaigns that effectively communicate our product offerings and enhance customer engagement. This role offers significant career growth opportunities, as you will be involved in decision-making processes that shape our marketing strategies and sales goals.</p><p>Our company fosters a collaborative culture that encourages professional development and continuous learning. You will have access to training programs and mentorship that will enhance your skills and prepare you for future leadership roles within the organization. Join us to be part of a team that values innovation, teamwork, and a commitment to excellence in the food manufacturing industry.</p><ol><li><b>Responsibilities:</b>Develop and implement comprehensive sales strategies that align with the company’s growth objectives, utilizing CRM software to track customer interactions and sales performance.</li><li>Conduct market research and competitive analysis to identify opportunities for product positioning and differentiation, ensuring our offerings meet customer demands effectively.</li><li>Collaborate with the marketing team to create engaging promotional materials and campaigns that drive brand awareness and customer loyalty.</li><li>Train and mentor junior sales staff, providing guidance on best practices in sales techniques and customer relationship management to enhance team performance.</li><li>Monitor sales metrics and prepare detailed reports for senior management, analyzing data to make informed decisions and adjust strategies as necessary.</li><li>Establish and maintain strong relationships with key clients, addressing their needs and concerns promptly to ensure high levels of customer satisfaction.</li><li>Participate in industry events and trade shows to represent the company, network with potential clients, and gather market intelligence.</li><li>Work closely with the production team to ensure product availability aligns with sales forecasts and customer demand, optimizing the supply chain process.</li><li>Develop and manage the sales budget, ensuring effective allocation of resources to maximize return on investment in marketing and sales initiatives.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Proven sales and marketing strategy development skills that drive business growth and customer engagement.</li><li>Strong analytical skills to interpret market data and make strategic decisions based on insights.</li><li>Excellent communication skills, both written and verbal, to effectively convey marketing messages and sales pitches.</li><li>Experience with CRM and marketing automation tools to streamline sales processes and enhance customer interactions.</li><li>Leadership abilities to mentor and guide a sales team toward achieving performance targets.</li><li>Creative thinking to develop innovative marketing campaigns that resonate with diverse audiences.</li><li>Strong organizational skills to manage multiple projects and deadlines effectively in a fast-paced environment.</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Commercial, Sales &amp; Brand Operations Manager – Kitchen Industry (Kuwait)</p><p>About the Company</p><p>We are a leading company in Kuwait specializing in the design, manufacturing, and installation of premium German kitchens, locally manufactured wooden kitchens, stainless steel kitchens, aluminum kitchens, wardrobes, interior fit-out solutions, and building materials.</p><p>We are seeking an exceptional <b>Commercial, Sales &amp; Brand Operations Manager</b> to lead the company's commercial growth, sales performance, brand development, and operational excellence.</p><p>Key Responsibilities</p><p>Commercial Leadership</p><ul><li>Develop and execute the company's commercial strategy to achieve sustainable growth and profitability.</li><li>Drive sales growth across retail, residential, corporate, and project sectors.</li><li>Build strategic partnerships with developers, consultants, architects, contractors, and key clients.</li><li>Identify new business opportunities and expand market share.</li></ul><p>Sales Management</p><ul><li>Lead, coach, and motivate the sales team to consistently exceed sales targets.</li><li>Establish KPIs, sales forecasts, budgets, and performance dashboards.</li><li>Monitor CRM activities, conversion rates, and customer pipelines.</li><li>Ensure exceptional customer experience from inquiry to project handover.</li></ul><p>Brand &amp; Marketing</p><ul><li>Develop and implement the company's branding and positioning strategy.</li><li>Manage digital marketing campaigns, social media, exhibitions, and promotional activities.</li><li>Coordinate with marketing agencies to maximize lead generation and return on investment (ROI).</li><li>Monitor competitors, pricing strategies, and market trends.</li></ul><p>Operations Management</p><ul><li>Coordinate closely with design, production, procurement, installation, and after-sales departments.</li><li>Improve operational efficiency, productivity, and quality standards.</li><li>Monitor project execution, delivery schedules, and customer satisfaction.</li><li>Ensure compliance with company procedures and quality management systems.</li></ul><p>Financial &amp; Business Performance</p><ul><li>Prepare annual business plans, budgets, and commercial forecasts.</li><li>Monitor profitability, gross margins, and operating expenses.</li><li>Analyze financial reports and recommend corrective actions.</li><li>Deliver monthly executive reports with measurable business outcomes.</li></ul><p>Required Qualifications</p><ul><li>Bachelor's degree in Business Administration, Marketing, Architecture, Interior Design, Engineering, or a related field.</li><li>MBA is an advantage.</li><li>Minimum <b>7 years</b> of progressive experience in sales, commercial management, or business development.</li><li>At least <b>3 years</b> in a leadership role within the kitchen, furniture, interior fit-out, or building materials industry.</li><li>Previous experience in German kitchen brands is highly preferred.</li></ul><p>Technical Knowledge</p><ul><li>Strong understanding of German kitchens, wooden kitchens, stainless steel kitchens, aluminum kitchens, wardrobes, and interior finishing.</li><li>Knowledge of kitchen manufacturing processes and materials.</li><li>Ability to read architectural drawings and kitchen layouts.</li><li>Familiarity with design software such as Winner, AutoCAD, SketchUp, or similar.</li><li>Experience with ERP and CRM systems (Odoo, SAP, Microsoft Dynamics, Salesforce, or equivalent).</li></ul><p>Leadership Competencies</p><ul><li>Strategic thinking and business planning.</li><li>Commercial negotiation and contract management.</li><li>Team leadership, coaching, and performance management.</li><li>Strong analytical and financial decision-making skills.</li><li>Excellent communication and presentation abilities.</li><li>Results-oriented mindset with exceptional problem-solving capabilities.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Key Performance Indicators (KPIs)</p><ul><li>Revenue Growth.</li><li>Gross Profit Margin.</li><li>Sales Target Achievement.</li><li>Lead Conversion Rate.</li><li>Customer Satisfaction (CSAT).</li><li>Market Share Growth.</li><li>Brand Awareness.</li><li>Project Delivery Performance.</li><li>Team Productivity.</li><li>CRM Compliance.</li><li>Customer Retention.</li><li>Business Development Success.</li></ul><p>Requirements</p><ul><li>Currently residing in Kuwait or previous Kuwait market experience.</li><li>Valid driving license.</li><li>Fluent in English (Arabic is a strong advantage).</li></ul><p>Compensation</p><ul><li>Competitive salary based on qualifications and experience.</li><li>Performance-based bonus.</li><li>Sales commission.</li><li>Career growth opportunities.</li><li>Professional development and training.</li><li>Leadership role within a rapidly growing organization.</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job Purpose The POS Development &amp; Implementation Specialist is responsible for the end-to-end planning, coordination, implementation, and tracking of Point-of-Sale Materials (POSM) across all channels and brands. The role serves as the key liaison between Trade Marketing, Marketing, Sales, Supply Chain, and other stakeholders to ensure POSM activities are delivered on time, executed effectively in the market, and aligned with business objectives. Key Responsibilities POSM Planning &amp; Execution • Develop and maintain the annual POSM and promotional activity calendar. • Coordinate with Sales, Marketing, and Trade Marketing Operations (TMO) to align POSM requirements and timelines. • Translate marketing activities into actionable POSM briefs and production plans. • Monitor project milestones and proactively address risks to ensure timely delivery. Sales &amp; Cross-Functional Coordination • Provide clear guidance to Sales teams on POSM priorities and activity execution. • Ensure effective communication and alignment between Sales, Marketing, and Trade Marketing teams. • Support the successful implementation of promotional campaigns across all channels. POSM Inventory &amp; Distribution Management • Manage POSM inventory and maintain accurate stock records. • Coordinate warehouse-to-market distribution to ensure timely deployment of POSM materials. • Track POSM usage, availability, and deployment status across locations. • Develop and implement plans for excess or obsolete POSM inventory to minimize waste and costs. Proof of Performance (POP) Management • Coordinate the collection of execution evidence, including photos and field reports. • Review POP submissions to ensure compliance and execution quality. • Prepare performance reports and provide actionable insights to stakeholders. • Recommend improvements to enhance future POSM execution and effectiveness. New Product Listings &amp; Sampling Support • Coordinate new SKU listing requirements with Sales, Marketing, and Trade Marketing Operations. • Organize and distribute product samples for customer presentations and listing activities. • Monitor and report on sample distribution and utilization. Qualifications &amp; Experience • 4–6 years of experience in trade marketing, commercial operations, or a related field. Hands-on experience in POSM management and in-store execution is required. Background in FMCG or consumer goods is strongly preferred. • Strong organisational and follow-up skills — able to manage multiple tasks and deadlines simultaneously. • Clear and confident communicator, comfortable coordinating across Sales, Marketing, and Operations teams. • Detail-oriented with a practical, hands-on approach to execution. • Comfortable working with trackers, calendars, and reporting tools (MS Excel and PowerPoint proficiency required). • Proactive in flagging issues and following through to resolution. • Fluency in English (written and spoken) is required. • Arabic is a plus. • Availability to conduct periodic store visits and field checks.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p> Fluency in English (written and spoken) is required. • Arabic is a plus. </p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Common Support Equipment Technician diagnoses, repairs, and maintains Common Support Equipment (CSE). Responsibilities include troubleshooting malfunctions, performing scheduled and unscheduled maintenance, analyzing maintenance trends, and documenting actions using automated systems. Technicians utilize various diagnostic tools, such as multi-meters and oscilloscopes, to repair mechanical and electronic systems. They also handle fluids, conduct corrosion treatments, manage hazardous materials, and prepare CSE for deployment. The role includes operating and servicing support equipment and tow vehicles, while adhering to safety, Tool Control, and Foreign Object Damage prevention standards at all times.</p><p>SUMMARY The Common Support Equipment Technician diagnoses malfunctions and repairs Common Support Equipment (CSE); inspects and approves completed maintenance actions; solves repair problems by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on CSE by inspecting, testing and operating CSE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components. As well as stenciling and marking CSE, storing, handling, labeling, using and disposing of hazardous materials and hazardous waste. The Technician prepares CSE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles such as Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety at all times.</p><p>ESSENTIAL FUNCTIONS Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify work performed by another for which he/she is qualified to perform. Reviews, interprets, and applies the assigned maintenance manual procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data. Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Performs O , I and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals. Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications. Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins. Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. Analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, circuit card testers, transistor testers, and hand tools. Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. Performs proper handling and disposal of chemicals and petroleum products required during maintenance. Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system. Performs close tolerance adjustment, repair and rework of equipment in and out of shop area. Services, inspects and tests aviation support equipment used for direct and indirect aircraft support. Troubleshoots, inspects, services, tests and conditions storage batteries to include lead-acid, gel and sealed type. Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE). Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment. Conduct off station maintenance when required. When necessary, performs other duties and supervisory functions, critical to the function of the program and to ensure compliance with the Performance Work Statement (PWS).</p><p>PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is frequently required to use hands to finger, handle, or feel; sit, stand and reach with hands and arms; walk, climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee must be able to lift 20 lbs. and occasionally lift and/or move up to 50 lbs. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must be able to adhere to and comply with all Kuwaiti Labor and Immigration requirements.</li><li>Must be United States (U.S.) citizen, have a high school diploma or equivalent, be able to read, write, and understand the English language.</li><li>Must be able to obtain a United States Passport. If you currently possess a United States Passport and it must have at least 24 months of time remaining before expiration.</li><li>Graduation from a standard four (4) year high school or equivalent (GED).</li><li>Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted.</li><li>Have a strong knowledge base of aviation maintenance procedures (safety, tool control, HAZMAT, Inspection programs, Administrative requirements, support equipment, calibration/torque procedures).</li><li>Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc ) as required by local policies.</li><li>Must be able to obtain / maintain the following required certifications / qualifications: -Applicable Support Equipment licensing - I Level &amp; O Level Tire &amp; Wheel certification -Hydraulic Contamination certification -Collateral Duty Inspector (CDI) qualification</li><li>Must be willing and able to deploy off-site as required to support Kuwait Air Force operations.</li><li>Must be able to work day shift, night shift or weekend duty and travel as part of a maintenance repair team as required.</li><li>Have a strong knowledge base of Intermediate Level Maintenance business procedures.</li><li>Must have a current civilian driver's license, and be able to obtain and maintain a government flight line driver s license.</li><li>Must have an in-depth knowledge of technical orders/job guides/publications read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications.</li><li>Must be able overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations.</li><li>Must have a working knowledge (input and extract data) of computers.</li><li>Must be willing and able to work with job required hazardous materials.</li><li>Must be willing and able to conduct specialty on the job training.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Assistant Well Site Leader is responsible for providing clear leadership in every aspect of HSE protection, ensuring safe working practices are used. They assist the Well Site Leader in conducting well operations safely, in accordance with the approved well operations program, and in compliance with the applicable policies/standards/procedures and regulatory requirements within the allocated time/cost with optimal use of resources. They develop required training and on-the-job exposure to develop the skills needed to become a Well Site Leader. Organize and lead brief and debrief safety and operations meetings that are related to well operations. Lead daily planning meetings and discuss operations with customer representatives, contractors, PL and third-party supervisors. Attend daily planning call with supervisors from various parties. Update forecast and planned activity to anticipate resource requirements to meet well demands and provide optimum efficiency of services. Check that equipment and services comply with the contract. Manage proper inventory of tangibles such as, but not limited to, cement, barite, bits, as well as rental equipment, and coordinate with PL OP and third-party suppliers as needed. Prepare and ensure material and equipment requests are issued in a timely manner to avoid disruption of operation. Ensure that operations are conducted to prevent the risk of well control, stuck pipe, and any other project and operational risks. Prepare detailed procedures for specific operations (i.e., running casing, cementing, etc.), including technical and operational calculations as relevant to the well- or rig-site operations (e.g., casing volume.) Ensure compliance with Schlumberger policies and Integration PL standards, including standing orders. Manage and monitor operations communications to ensure stakeholders are kept informed and service providers possess information they need to perform their services. Prepare daily cost estimates based on goods consumed and services provided. Participate in operational performance improvements and program changes with the project team. Review operational problems and support job incidents, changes, incident response and recovery, including coordination with the individual PLs and key contractors. Ensure support to other functional processes and product lines with proper handoffs at key interfaces.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>10+ SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Kana Group is seeking a creative and detail-oriented Graphic Designer to develop engaging visual content across its beauty, retail, healthcare, e-commerce, and F&amp;B brands. The ideal candidate will be responsible for creating compelling designs for digital and print platforms, ensuring brand consistency, and supporting marketing campaigns that enhance customer engagement and brand awareness. Kana Group operates multiple businesses across Kuwait and the UAE, including beauty salons, retail, healthcare, and F&amp;B concepts.</p><p><br></p><p><b>Key Responsibilities:</b></p><p><br></p><p><b>Graphic Design &amp; Branding</b></p><ul><li>Create high-quality visual content for social media, websites, e-commerce platforms, email marketing, and digital advertising campaigns.</li><li>Design marketing collateral including brochures, flyers, posters, banners, POS materials, presentations, and promotional assets.</li><li>Ensure brand consistency across all touchpoints and business units.</li><li>Develop creative concepts and layouts aligned with campaign objectives and brand guidelines.</li></ul><p><br></p><p><b>Digital Content Creation</b></p><ul><li>Design engaging social media creatives, stories, reels covers, and digital advertisements.</li><li>Support content creation initiatives through image editing, retouching, and basic motion graphics.</li><li>Coordinate with the marketing team to create visually impactful campaigns that drive engagement and conversions.</li></ul><p><br></p><p><b>Print &amp; Production</b></p><ul><li>Prepare print-ready artwork and coordinate with suppliers and printers to ensure quality output.</li><li>Review final designs and production materials for accuracy and brand compliance.</li></ul><p><br></p><p><b>Collaboration &amp; Project Management</b></p><ul><li>Work closely with e-commerce, operations, and management teams to understand project requirements.</li><li>Manage multiple projects simultaneously while meeting deadlines in a fast-paced environment.</li><li>Stay updated on industry trends, design techniques, and emerging creative tools.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Technical Skills</b></p><ul><li>Proficiency in Adobe Creative Suite (Photoshop, Illustrator, InDesign).</li><li>Knowledge of Adobe Premiere Pro and After Effects is preferred.</li><li>Familiarity with Figma, Canva, and other design tools.</li><li>Basic photography, videography, and photo-retouching skills are advantageous.</li><li>Understanding of typography, layout design, branding, and visual storytelling. </li></ul><p><br></p><p><b>Competencies</b></p><ul><li>Creative thinking and strong visual design skills.</li><li>Excellent attention to detail.</li><li>Strong time management and organizational abilities.</li><li>Ability to receive feedback and implement revisions effectively.</li><li>Strong communication and teamwork skills.</li><li>Ability to work under pressure and manage multiple deadlines.</li></ul><p><br></p><p><b>Qualifications &amp; Experience</b></p><ul><li>Bachelor's Degree or Diploma in Graphic Design, Visual Communications, Fine Arts, or a related field.</li><li>2–4 years of experience in graphic design, preferably within retail, beauty, lifestyle, healthcare, hospitality, or consumer-focused industries.</li><li>Strong portfolio showcasing digital and print design work.</li><li>Experience in multi-brand environments is an advantage.</li></ul><p><br></p><p><br></p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under the supervision of the Pest Management Supervisor, the Pest Controller Lead is responsible to the assigned supervisor in performance of their duties. Assigns work to and oversees work being accomplished by Pest Controllers. Assures safety practices are followed. Major areas of responsibility include, but are not limited to: residential, commercial, and industrial pest management services, and the safe and efficient operation of industry particular equipment for LOGCAP V AOR. Must be knowledgeable of laws governing the application of controlled and non-controlled pesticides and herbicides Coordinates work/inspections with facility managers/occupants. Researches materials, and prepares necessary documents. Responds to emergency service calls during regular hours or after-duty on-call hours.</p><br> <strong>Responsibilities</strong><br><br> <ul> <li>Assigns work to and oversees work being accomplished by Pest Controllers.</li> <li>Assures safety practices are followed. Major areas of responsibility include, but are not limited to: residential, commercial, and industrial pest management services, and the safe and efficient operation of industry particular equipment for LOGCAP V AOR.</li> <li>Must be knowledgeable of laws governing the application of controlled and non-controlled pesticides and herbicides Coordinates work/inspections with facility managers/occupants.</li> <li>Researches materials, and prepares necessary documents.</li> <li>Responds to emergency service calls during regular hours or after-duty on-call hours.</li> </ul><br></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Minimum Qualifications: Education/Certifications:</strong> One year related experience may be substituted for one year of education, if degree is required.</p><ul> <li>Must be a U.S. Citizen High School Graduate or equivalent</li> <li>Capable of effectively communicating technical information in English, both written and verbal</li> <li>Must possess a valid/current (DoD or State) Pesticide Applicator License</li> </ul> <p></p> <li><strong>Experience:</strong> <ul> <li>Minimum of two (2) year experience in the Pest Control field</li> </ul> </li> <li><strong>Skills:</strong> <ul> <li>Excellent communication and people skills.</li> <li>Able to use computer-automated systems to perform assigned duties</li> </ul> </li> <li><strong>Working Conditions:</strong> <ul> <li>Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit.</li> <li>Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months).</li> <li>Includes some industrial production environment conditions as well.</li> </ul> </li> <li><br><ul> </ul> </li><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">The Transportation Lead provides comprehensive movement control, transportation synchronization, and multimodal distribution support across the USCENTCOM Area of Responsibility. This role integrates Air Coordination Cell operations, container management, convoy coordination, customer service, staging area management, and HAZMAT documentation. The position requires proficiency with IBS-CMM, CMOS, RFID systems, and compliance with DTR 4500.9-R Part II. Additionally, the role supports operational sustainment, movement control, and distribution activities for the 1st Theater Sustainment Command (1 TSC), including planning, tracking, and coordinating strategic and tactical movement of personnel, cargo, and equipment across air, land, and sea. The position ensures accurate execution of provisioning, inventory, maintenance, repair, and transportation activities while contributing to the refinement of logistics policies and the integration of processes across teams and partner organizations.HOW YOU WILL MAKE AN IMPACT:Provide leadership to CRSP teams including Line Haul, Air Coordination Cell, Container Processing, Container Fabrication, Customs Clearance, and TAS teams.Verify DD Form 1149, TAC Codes, DODAACs, shipment priority, and POC information.Receive cargo from all transportation modes and process for delivery.Validate manifests, MROs, DD Form 1149, and DD Form 1384.Prepare sensitive cargo documentation including DD Form 1387-2 and DD Form 1907.Coordinate pre-Joint Inspections and Joint Inspections.Build and inspect 463L pallets IAW DTR 4500.9-R Part II.Coordinate with KMOI and MCTs for required movement.Perform pre-JIs to ensure compliance with Air Force regulations.Transport or coordinate transportation to/from APOE/D.Prepare DD Form 1384 TCMD and complete prime/trailer card entries.Conduct export inspections with Military Customs.Compute center of balance and weight for rolling stock.Maintain historical cargo movement data across the AOR.Operate MHE including 4K 100K forklifts and container handlers.Support ocean freight movement through designated SPOE/D.Lead convoy operations ensuring preparation, safety, and accountability.Deliver daily and weekly safety briefings.Support logistics requirements through analysis, planning, and coordination.Manage LIS data including GCSS-Army.Oversee purchasing, transportation, warehousing, and production control.Ensure host-nation compliance for company/contract vehicle documentation.Plan and coordinate logistics, transportation, and customer service activities.Ensure compliance with legal, military, and ISO requirements.Plan, schedule, and track movements across all transportation nodes.Create and manage TMRs using LOADOUT and other LIS tools.Coordinate route, highway, airspace, and customs clearances.Support intermodal operations including distribution, retrograde, and onward movement.Maintain ITV using approved DoD systems.Assist with BBPCT (blocking, bracing, packing, crating, and tie-down).Participate in movement boards and multinational coordination meetings.Ensure documentation compliance per DTR 4500.9-R.Support container management and ensure accurate JCM reporting.Ensure adherence to U.S., USCENTCOM, USARCENT, and 1 TSC policies.Maintain awareness of HAZMAT requirements and ensure certification compliance.WORKING ENVIRONMENTWork is performed in outdoor, warehouse, and operational environments with potential exposure to physical, chemical, and biological hazards. PPE is required in designated areas. Must comply with OSHA, EPA, Fire Regulations, host-nation policies, and company safety standards.PHYSICAL ACTIVITIESWork requires heavy lifting up to 70 pounds, climbing, stooping, prolonged standing or sitting, and working near hazardous materials or equipment.MINIMUM QUALIFICATIONSHigh school diploma and 9 yrs of experience. (will consider other combinations of education, military, training and experience) Ability to obtain a Kuwait/Host Nation Driver s License.Minimum of seven (7) years of related logistics, transportation, distribution, movement control, or DoD operations experience. Knowledgeable in HAZMAT certification, TMR, and TCMD processing. Experience working in austere environments preferred.Supervisory, leadership, or management experience.Ability to engage with employees and customers with a service-oriented attitude.Knowledge of strategic planning, resource allocation, and workflow coordination.Strong interpersonal and negotiation skills.Ability to prioritize and manage demanding workloads.Ability to work under pressure.Intermediate proficiency in Word, Excel, and Outlook.Strong organizational and analytical skills.Ability to interpret transportation regulations including DTR 4500.9-R.Experience with stock control and asset management.Proficiency with LIS systems including LOADOUT, GCSS-Army, IGC, and JCM.Strong attention to detail.Valid US and Host Nation driver s license.Active U.S. SECRET clearance.Valid U.S. passport (minimum 2 years validity, 4 blank pages).Ability to pass CRC requirements and work a 48-hour workweek.Willingness to deploy to Iraq, Kuwait, Jordan, Saudi Arabia, Bahrain, Qatar, UAE, or other assigned areas.CERTIFICATIONSHAZMAT/HAZCOM certification (required or obtainable).Additional theater-required certifications including AT, OPSEC, Cyber, etc. GDIT IS YOUR PLACEAt GDIT, the mission is our purpose, and our people are at the center of everything we do. Growth: AI-powered career tool that identifies career steps and learning opportunities Support: An internal mobility team focused on helping you achieve your career goals Rewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay and paid time off Community: Award-winning culture of innovation and a military-friendly workplaceOWN YOUR OPPORTUNITYExplore a career in supply chain and logistics at GDIT and you ll find endless opportunities to grow alongside colleagues who thrive on efficiency, accuracy, and accountability.</div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Fleet Sales Executive role offers a unique opportunity for a driven individual to thrive in the auto spare parts industry. This position is integral to our sales team, focusing on building relationships with fleet operators, transportation companies, and logistics firms. Your expertise will be vital in driving sales growth and expanding our market presence in Al Kuwait. This is not just a sales role; it's a chance to make a significant impact on our organization through strategic client engagement and solution-oriented selling.</p><p>Joining our team means becoming part of a culture that values collaboration, innovation, and continuous improvement. We are committed to your professional development, providing ongoing training and resources to help you excel. As you grow in your role, you will have opportunities to take on more responsibilities and advance your career in sales and account management. The supportive environment encourages you to share your ideas and contribute to team success, making it an ideal place for ambitious individuals.</p><p>In this position, you will leverage your knowledge of automotive spare parts and vehicle applications to deliver tailored solutions to our clients. Your ability to understand client needs and provide exceptional service will be key to building lasting relationships. With a competitive salary and commission structure, as well as additional benefits, this role rewards your dedication and hard work in the auto spare parts sector. If you are ready to take the next step in your career, we encourage you to apply and join our team.</p><p><b>Responsibilities:</b></p><ol><li>Develop and implement effective sales strategies to achieve and exceed sales targets while ensuring customer satisfaction and retention through strong relationship management.</li><li>Identify new business opportunities within the fleet management sector, utilizing market research and analysis to target potential clients effectively.</li><li>Conduct engaging product demonstrations and tailored presentations to showcase the benefits of our auto spare parts, driving sales conversions and enhancing client engagement.</li><li>Collaborate with the marketing team to create promotional materials and campaigns that effectively highlight our products and generate quality leads.</li><li>Maintain organized records of all sales activities, customer interactions, and market intelligence using CRM software to ensure effective tracking and reporting of sales performance.</li><li>Provide outstanding after-sales support to clients, addressing any issues promptly to maintain high levels of customer satisfaction and loyalty.</li><li>Stay informed about industry trends, competitor activities, and emerging technologies to enhance sales strategies and improve product offerings.</li><li>Participate in trade shows and industry events to network with potential clients and promote the company’s brand effectively.</li><li>Work closely with logistics and supply chain teams to ensure timely product delivery to clients, optimizing inventory levels and reducing operational costs.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Bachelor's Degree in Business Administration, Marketing, Automotive Engineering, or a related field is preferred.</li><li>3–5 years of experience in Fleet Sales, B2B Sales, or Automotive Spare Parts Sales is essential.</li><li>Proven track record of achieving sales targets and managing client relationships effectively.</li><li>Strong knowledge of automotive spare parts and vehicle applications to provide informed solutions to clients.</li><li>Excellent sales, negotiation, and presentation skills to engage clients and drive sales conversions.</li><li>Strong account management and business development capabilities to foster long-term client relationships.</li><li>Proficiency in CRM software and sales analytics tools to manage customer relationships and track sales performance.</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a dynamic and results-oriented Salesman to join our thriving accounting firm in Kuwait. This role is perfect for individuals who are passionate about sales and eager to make a significant impact in the financial services sector. As a Salesman, you will be responsible for promoting our accounting services to potential clients, building strong relationships, and driving business growth. This is an exciting opportunity to develop your sales skills while working in a supportive and collaborative environment.</p><p>In our company, we believe in fostering personal and professional growth. You will receive comprehensive training and mentorship from experienced professionals who are dedicated to helping you succeed. Our team culture is centered around innovation, teamwork, and continuous improvement, which means you will have plenty of opportunities to learn and advance your career. We encourage our employees to take initiative and bring new ideas to the table, allowing you to not only meet your sales targets but also contribute to the overall success of the organization.</p><p>As you embark on this journey with us, you will find that your contributions are valued and recognized. With a strong emphasis on career progression, we provide pathways for advancement within our organization. You will have the chance to take on additional responsibilities and grow into more senior sales roles as you demonstrate your abilities. Join us in making a difference in the accounting industry while achieving your career aspirations!</p><p><b>Responsibilities:</b></p><ol><li>Develop and implement effective sales strategies to attract new clients, utilizing market research and analysis to identify potential leads and opportunities.</li><li>Build and maintain strong relationships with clients through regular communication and follow-ups, ensuring their needs are met and fostering long-term partnerships.</li><li>Conduct presentations and product demonstrations to showcase our accounting services, highlighting the unique value propositions that differentiate us from competitors.</li><li>Collaborate with the marketing team to create promotional materials and campaigns that effectively communicate our services and drive lead generation.</li><li>Track and analyze sales performance metrics, providing regular reports to management and adjusting strategies as needed to meet or exceed sales targets.</li><li>Attend industry events, trade shows, and networking functions to represent the company and expand your professional network.</li><li>Provide excellent customer service by addressing client inquiries and resolving issues promptly, ensuring a positive experience that encourages referrals.</li><li>Stay updated on industry trends, competitor offerings, and regulatory changes to effectively position our services and maintain a competitive edge.</li><li>Participate in training and development programs to enhance your sales skills and knowledge of accounting services, contributing to your personal growth and career advancement.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Proven sales experience, demonstrating a track record of meeting or exceeding sales targets in a competitive environment.</li><li>Strong communication skills, both verbal and written, enabling effective interaction with clients and team members.</li><li>Excellent negotiation skills, with the ability to persuade and influence others to achieve desired outcomes.</li><li>Knowledge of accounting principles and services, allowing for informed discussions with potential clients.</li><li>Proficiency in CRM software and sales analytics tools to manage leads and track performance effectively.</li><li>Ability to work independently and as part of a team, demonstrating flexibility and adaptability in a fast-paced environment.</li><li>Strong problem-solving skills, with the capacity to identify challenges and develop effective solutions to meet client needs.</li></ul></div>

<p><h4>Job description</h4> <p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Conduct the training and examination on all NDT methods to certify and to re-certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.</p> <p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p> <p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p> <p>Establish radiation areas for radiographic operations.</p> <p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p> <p>Perform nondestructive inspection on structures, components, and systems.</p> <p>Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p> <p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p> <p>Operate, maintain, and inspect nondestructive equipment.</p> <p>Perform operator maintenance and service inspections on shop equipment and tools.</p> <p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p> <p>Perform silver recovery functions.</p> <p>Handle and dispose of hazardous waste and materials.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum requirements</h4> <p>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</p> <p>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</p> <p>Three (3) years’ experience as a Non Destructive Inspection (NDI).</p> <p>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/DIDC Training).</p> <h4>Security clearance requirements</h4> <p>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a clearance and for facility credentials/authorization to work at this facility.</p> <h4>Additional and preferred qualifications</h4> <ul> <li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li> <li>Capable of assuming technical responsibility for the NDT facility and staff.</li> <li>Capable of selecting the method and technique for a specific inspection.</li> <li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li> <li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li> <li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p><p>• Conduct the training and examination on all NDT methods to certify and to re- certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p><p>• Determine test method and prepare fluids and parts for nondestructive inspection.</p><p>• Interpret nondestructive inspection test results and provide information about defects to repair center.</p><p>• Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p><p>• Establish radiation areas for radiographic operations.</p><p>• Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p><p>• Perform nondestructive inspection on structures, components, and systems.</p><p>• Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p><p>• Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p><p>• Operate, maintain, and inspect nondestructive equipment.</p><p>• Perform operator maintenance and service inspections on shop equipment and tools.</p><p>• Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p><p>• Perform silver recovery functions.</p><p>• Handle and dispose of hazardous waste and materials</p><p>• Perform other qualified duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li><li>Three (3) years experience as a Non Destructive Inspection (NDI).</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li><li>Capable of assuming technical responsibility for the NDT facility and staff.</li><li>Capable of selecting the method and technique for a specific inspection.</li><li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li><li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li><li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Overview</b><br>With over 17,000 employees worldwide, the Microsoft Customer Experience &amp; Success (CE&amp;S) organization is responsible for the strategy, design, and implementation of Microsoft's end-to-end customer experience. Come join CE&amp;S and help us build a future where customers come to us not only because we provide industry-leading products and services, but also because we provide a differentiated and connected customer experience.<br>We are looking for a highly motivated and passionate&nbsp;<strong>Data Security Cloud Solution Architect (CSA)</strong>&nbsp;to drive our customer's security transformation on the&nbsp;Microsoft 365 Platforms. This is a customer-facing role, owning the security-focused technical relationship and strategy between the customer and Microsoft as well customer engagements, including architecture, implementation, and operational health.<br>The ideal candidate will have&nbsp;<strong>hands-on project delivery experience</strong>&nbsp;in customer-facing roles and success in leading in-depth&nbsp;<strong>technical data security architecture discussions</strong>&nbsp;with senior customer executives, Enterprise Security Architects, Enterprise Architects, IT Management, and Developers to Secure our customer's technology estate and drive Security as an enabler for Microsoft security solutions.&nbsp;<br><br><br><b>Responsibilities</b><br><strong>Trusted Advisor</strong>&nbsp;- Empower customers in their Microsoft Security adoption journey, being hands on with them to envision and define a Secure strategy, Architecture, and implementation of necessary security controls aligned with Microsoft 365 Azure Data Security workloads while ensuring operational health.<br><strong>Security Services Acquisition and Expansion&nbsp;</strong>- Position and deliver solutions that drive Data Security products usage with a focus on Microsoft Purview. Collaborate with Azure Infrastructure, Data, Apps teams to expand Security of cloud migration and AI projects.&nbsp;<br><strong>Understand Customer/Partner Technical Environment</strong>&nbsp;- Accelerate Business Value of overall Security adoption by improving security posture and ensuring that the solution exhibits "Secure by Design" and Zero Trust framework.&nbsp;<br><strong>Architecture Design and Deployment</strong>&nbsp;- Run Architectural Design Session to build a plan for implementing the data security solution — governing design in line with customer business goals and their technical environment. Outcome is consensus on solution design and next steps toward production<br><strong>Practice Development</strong>&nbsp;- Collaborate and orchestrate with other Cloud Solution Architects and Microsoft stakeholders including FastTrack, partner, and Microsoft Services in developing complex end-to-end Enterprise solutions with the Microsoft Security platform<br><strong>Voice of the Customer</strong>- Be a Voice of Customer to share insights and best practices, connect with Global Security teams at Microsoft, Engineering and Product teams to remove blockers and influence the solution roadmap.<br><br><b>Qualifications</b><br>Bachelor's Degree in Computer Science, Information Technology, Engineering, Business,<br>Cybersecurity, or related field 5+ years experience in data security technologies, cybersecurity, information technology (IT) consulting/support, systems administration, network operations, software development/support, technology solutions, practice development, architecture, and/or consulting OR equivalent experience.<br>Candidates should have broad experience in security and expertise around related technologies and concepts such as Zero Trust , threat management,<strong>&nbsp;AI Security,&nbsp;Data Security&nbsp;</strong>and Extended Detection &amp; Response (XDR) and Identity. Candidates should have knowledge as a data security engineer or consultant to understand industry trends and competitive landscape, advise customers on ways to strengthen their security posture or health, and land customer value through security.<br>The technical aptitude and experience to learn new cloud security technologies and understand relevant cloud security market trends.<br>Knowledge of cloud security platforms and competitors. Breadth of technical security experience and knowledge, with depth / Subject Matter Expertise in following security solutions:<br><ul><li><strong>Data Security - Microsoft Purview (hands on project delivery experience required) -&nbsp;</strong>Data Protection, Governance, Compliance, Data Loss Prevention, Data Security POsture Management / AI Data Security</li><li><strong>Threat protection -&nbsp;</strong>Microsoft Defender XDR, Defender for Cloud, Endpoint, Identity and O365&nbsp;</li><li>Identity and Access Management (Microsoft Entra)</li></ul>Microsoft certifications in those technologies prefered.&nbsp;<br> <br><p>This position will be open for a minimum of 5 days, with applications accepted on an ongoing basis until the position is filled.</p><br><br><br><p>Microsoft is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, citizenship, color, family or medical care leave, gender identity or expression, genetic information, immigration status, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran or military status, race, ethnicity, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable local laws, regulations and ordinances. If you need assistance with religious accommodations and/or a reasonable accommodation due to a disability during the application process, read more about <b><u>requesting accommodations.</u></b></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Job Description </b></p><ol><li>Holder of a valid Aircraft License </li><li>Possess aircraft type-rating experience with practical experience in line maintenance, base maintenance, troubleshooting, inspections, and maintenance certification activities.</li><li>Carry out all directions of the Senior Manager - Aviation Training, with regard to student practical activities in the workshop/ hangar.</li><li>Assist with daily operations of workshop/ hangar in general on a full-time basis.</li><li>To assist in the smooth running of the workshop/ hangar, with regards to its logistical needs in material preparation, storage and ordering of materials.</li><li>To ensure that health and safety procedure is practiced and enforced and reported to the workshop/ hangar supervisor in this regard.</li><li>Ensure that the workshop/ hangar are organized and prepared for the following day’s requirements, i.e. work is stored properly, equipment is left in a safe condition etc.</li><li>Assist and maintain an inventory of all tools and equipment.</li><li>Assist in the upkeep of registers and log books as required by OH&amp;S.</li><li>Record, issue and receive tools from/ to students.</li><li>Prepare raw materials for student projects (cutting to rough size).</li><li> Assist instructors during practical classes/ assessments.</li><li> Carry out minor repairs and routine maintenance, under supervision of the workshop supervisor, on tools &amp; equipment to comply with OH&amp;S so that is it is safe to sue and is in proper operating condition.</li><li> Liaise with instructors to ensure 100% availability of tools and consumables during all classes.</li><li> Design and fabricate equipment and teaching aids where appropriate with the assistance of instructors. Oversee cleaning of the workshop facility on a daily basis.</li><li> Follow the University rules and regulations.</li><li> Responsible for providing quality support towards workshop/ hangar activities.</li><li> Perform any other practical/ theoretical training related duties, as required by the Senior Manager- Aviation Training.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Degree\ Diploma in the relevant field </li><li>3 years experience in a technical environment.</li><li>A commitment to maintain high standards of workplace occupational health and safety.</li><li>Good communication and interpersonal skills in the English language.</li><li>Ability to maintain stock and equipment inventories.</li><li>Basic maintenance and servicing experience of tools and equipment.</li></ul></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Job Title:</b> Full-Time Faculty Position Biology and Biotechnology</p><p><b>Classification:</b> Faculty (Institutional Support)</p><p><b>Reports To:</b> Dean, School of Arts and Sciences</p><p><b>Location:</b> Kuwait City, Kuwait</p><p><span >.</span></p><p><b>Scope of Work</b></p><p>The Dean of the School of Arts and Sciences serves as the chief academic officer, providing strategic vision and operational leadership for the School. The Dean promotes excellence in teaching, scholarship, and community engagement; supports innovative academic programs; and advances diversity in faculty and student recruitment. The role also involves fostering interdisciplinary collaboration, strengthening connections with local and international communities, and enhancing the School's visibility and resources to support its academic mission and future growth.</p><p><b>Job Purpose</b></p><p>American International University (AIU) invites applications for Full-Time Faculty positions from qualified and motivated individuals committed to excellence in teaching, research, and service. Faculty members will contribute to the academic mission of the University by delivering high-quality teaching, supporting curriculum development, engaging in scholarly activities, mentoring students, and participating in departmental and institutional initiatives.</p><p><b>Position Overview</b></p><p>Full-time faculty members will be responsible for teaching undergraduate courses in Biology and Biotechnology, developing and updating course materials, assessing student learning outcomes, and contributing to program development and accreditation activities. Faculty members are also expected to engage in research and scholarly activities, provide academic advising, and participate actively in departmental committees and community outreach initiatives.</p><p><b>Required Qualifications</b></p><p>Ph.D. in Biotechnology, Molecular Biology, Genetics, Genomics, Biology, Biochemistry, Bioinformatics, Microbiology or a closely related discipline from an accredited institution.</p><p>Demonstrated university-level teaching experience in relevant subject areas.</p><p>Strong oral and written communication skills in English.</p><p>Evidence of research productivity and scholarly engagement.</p><p>Commitment to student-centered teaching and academic excellence.</p><p><b>Preferred Qualifications</b></p><p>Industry or professional experience relevant to Biotechnology or Biological Sciences.</p><p>Experience with curriculum development, assessment, and accreditation processes.</p><p>Expertise in emerging areas of Biotechnology, including 3-D Bioprinting, Clinical Sciences, Tissue Engineering, Bioinformatics, Genomics, and related fields.</p><p>Experience in supervising student research projects and internships.</p><p>Proficiency in the use of educational technologies and learning management systems.</p><p><b>Key Responsibilities</b></p><p><b>Teaching and Learning</b></p><p>Teach courses (minimum 12 credit hours per week) which may include General Biology, Cell and Molecular Biology, Genetics, Microbiology, and specialized and applied Biotechnology courses covering clinical sciences/Tissue engineering/Bioinformatics.</p><p>Develop course syllabi, instructional materials, laboratory activities, and assessments.</p><p>Evaluate student performance and provide timely feedback.</p><p>Maintain accurate academic records in accordance with university policies.</p><p>Collaborate with faculty in curriculum development.</p><p>Actively contribute to the intellectual and cultural growth of AIU s academic community.</p><p><b>Research and Scholarly Activities</b></p><p>Conduct research and scholarly activities within the candidate s area of expertise.</p><p>Support undergraduate student research initiatives.</p><p><b>Knowledge, Skills, and Competencies</b></p><p>Strong subject-matter expertise in Biology and Biotechnology.</p><p>Effective classroom management and student engagement skills.</p><p>Ability to work collaboratively in a multicultural academic environment.</p><p>Commitment to professional development and continuous learning.</p><p><b>Employment Type</b></p><p>Full-Time Faculty Position</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">Ph.D. in Biotechnology, Molecular Biology, Genetics, Genomics, Biology, Biochemistry, Bioinformatics, Microbiology or a closely related discipline from an accredited institution.<br>Demonstrated university-level teaching experience in relevant subject areas.<br>Strong oral and written communication skills in English.<br>Evidence of research productivity and scholarly engagement.<br>Commitment to student-centered teaching and academic excellence.<br>Industry or professional experience relevant to Biotechnology or Biological Sciences.<br>Experience with curriculum development, assessment, and accreditation processes.<br>Expertise in emerging areas of Biotechnology, including 3-D Bioprinting, Clinical Sciences, Tissue Engineering, Bioinformatics, Genomics, and related fields.<br>Experience in supervising student research projects and internships.<br>Proficiency in the use of educational technologies and learning management systems.</p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job description</p><p>Hiring | Radiographer (Radiography)</p><p>Location: Kuwait</p><p>We are looking for an experienced Radiographer (Radiography) to join our team in Kuwait.</p><p>Key Responsibilities:</p><p>-Prepare patients for x-ray examinations following receipt of requests from attending dental surgeons.</p><p>-Ability to sue Periapical, O.P.G., Cephalometric and digital x-ray and tomography x-rays.</p><p>-Perform some basic technical duties, which involves ensuring all radiographic equipment in excellent functioning condition, mixing the processing solutions and changing them as appropriate</p><p>-Accountable for the consumable materials (availability, needed quantity, to maintain the quality of the digital sensors)</p><p>-Perform necessary daily maintenance to the equipment and make necessary contact for professional maintenance/repair needed</p><br></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requirements:</p><p>-Completion of basic Secondary Education.</p><p>-Five years relevant experience</p><p>-Should have license from the Radiation Protection Division</p><p>-Prometric examination must be cleared</p><p>-Qualified in General Radiography in order to obtain licenses from MOH, Kuwait.</p><p>-Quadrabay Verification Report Required (For Educational and Experience Certificates)</p><p><br></p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Duct Manager position is a crucial role within our innovative Project &amp; Construction Planning team in Kuwait. As a Duct Manager, you will be responsible for overseeing the fabrication and installation of duct systems, ensuring that all projects meet the highest standards of quality and efficiency. This role not only requires technical expertise but also strong leadership skills, providing an exceptional opportunity to influence the direction of our projects and contribute to the success of our team.</p><p>In this position, you will play a vital role in production planning and manpower supervision, ensuring that all team members are well-trained and equipped to perform their tasks effectively. We foster a culture of collaboration and continuous learning, offering various training opportunities that will help you develop professionally and advance in your career. Your ability to motivate and guide your team will be essential for creating a positive work environment and achieving project goals.</p><p>As a Duct Manager, you will have the opportunity to make strategic decisions that impact project outcomes. Your experience in quality control, material management, and timely project completion will be invaluable as you navigate complex challenges and drive efficiency. We are seeking a proactive leader with a forward-thinking mindset who is eager to embrace new technologies and methodologies in duct management. Join us and take your career to new heights while contributing to groundbreaking projects in the construction industry.</p><p><b>Responsibilities:</b></p><ol><li>Oversee the duct fabrication and installation processes, ensuring compliance with project specifications, safety standards, and timely completion while coordinating with other trades to minimize disruptions.</li><li>Lead and supervise a team of duct fabricators and installers, providing effective training and mentorship to enhance their skills and ensure adherence to best practices and safety protocols.</li><li>Develop and implement production planning strategies, optimizing resource allocation and workflow to maximize efficiency and meet project deadlines effectively.</li><li>Conduct regular quality control inspections throughout the ductwork production and installation phases, addressing any discrepancies promptly to maintain high-quality standards.</li><li>Manage material procurement and inventory for duct fabrication, ensuring that all necessary materials are available on-site and that costs are kept within budget.</li><li>Prepare and maintain accurate documentation of all ductwork activities, including production schedules, quality reports, and progress updates for stakeholders.</li><li>Collaborate closely with project managers and engineers to review designs and specifications, providing insights on duct system optimization for improved functionality and efficiency.</li><li>Implement safety measures and compliance checks throughout the duct installation process, fostering a culture of safety awareness among team members.</li><li>Stay abreast of industry trends and advancements in duct fabrication technology, integrating innovative techniques and tools into project workflows to enhance productivity.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Extensive experience in duct fabrication and workshop management, ensuring high-quality production and adherence to project timelines.</li><li>Strong leadership skills, capable of supervising and motivating teams to achieve project goals and maintain a positive work environment.</li><li>Proficient in production planning and resource management, optimizing workflows to enhance efficiency and reduce costs.</li><li>Thorough understanding of quality control processes and safety regulations related to ductwork fabrication and installation.</li><li>Excellent communication skills, facilitating clear collaboration with project stakeholders, including engineers and architects.</li><li>Strong analytical and problem-solving skills, enabling quick identification and resolution of challenges during duct installation.</li><li>Familiarity with industry-specific software and tools for project management and ductwork design, improving operational efficiency.</li></ul></div>