Low Voltage Cable Jointer in Kuwait

<p><h4>Function:</h4> <p>Provides training and advice for repair, calibration, and modification of the wide variety of complex precision measurement equipment utilized by the GOK activities. Provides technical and procedural advice and guidance to KAF personnel and other GOK personnel concerning metrology-related matters such as the repair, calibration, or modification of precision measurement equipment, the conduct of laboratory operations, and the resolution of customer measurement problems. Provides in-depth technical expertise in one or more of the following disciplinary categories and can provide on-the-job training or formal classroom training as required. Performs precision measurements, calibrations, modifications, maintenance and repair actions, and other functions as necessary in all areas of laboratory operations. Assists in obtaining and maintaining laboratory quality assurance accreditation.</p> <p>This DC/Low-Frequency discipline includes the following measurement areas: voltage, current, power, resistance, capacitance, inductance, time and frequency (500 MHz and below), and modulation. It also encompasses repair, calibration, and/or modification of items such as audio and low-frequency signal generators, oscilloscopes, digital and analog voltmeters, AC/DC ammeters, watt meters, electronic counters, pulse generators, resistance, capacitance, inductance bridges, automated test equipment, and other general purpose measuring equipment.</p> <p>It is anticipated that engineering technicians will be assigned as these job descriptions state and other related specific tasking details and priorities will be determined and set by the Commander, KAFMB, and communicated to the contractor lead.</p> <h4>Qualifications:</h4> <p><strong>Associate’s degree</strong> in electronics technology from an accredited school, and ten (10) years of work experience operating, maintaining, troubleshooting, repairing, and calibrating electronic precision measurement equipment and calibration laboratory reference standards, with a working knowledge of the basic concepts of electronics and science. This knowledge shall include basic electricity, electronics, circuit theory, digital logic, algebra, and physics. OR;</p> <p>Completion of a U.S. military precision measurement and calibration program, a precision measurement and calibration school at an accredited school, or within a specialized calibration firm, and twelve (12) years of work experience operating, maintaining, troubleshooting, repairing, and calibrating electronic TMDE such as analog and digital multimeters, electronic counters, function generators, signal generators, analog and digital tape recorders, oscilloscopes, spectrum analyzers, and calibration laboratory measurement standards. Demonstrated experience in troubleshooting TMDE and measurement standards by making measurements with test equipment to identify problems at the component level. Demonstrated basic electronic construction and repair skills, including soldering and wiring, and the ability to perform these functions on delicate circuit cards.</p> <p>Candidate must be able to obtain and maintain a US Secret Clearance (Note: US citizenship is required to obtain and maintain the clearance).</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsible for operating and maintaining power generation and aircraft arresting systems in accordance with the performance work statement. Operation and maintenance services inlude, but are not limited to: catapults, arresting gear, and associated mechanical, hydraulic, and control systems involved primarily in aircraft takeoff and landing operations. Duties include installing and maintaining visual landing aids; testing and maintaining launch and recovery equipment using electric and mechanical test equipment and hand tools; activating airfield arresting systems, such as crash barriers and cables, during emergency landing situations; directing aircraft launch and recovery operations using hand or light signals; and maintaining logs of airplane launches, recoveries, and equipment maintenance. Provide operation, maintenance, inspection, and repair of power generation systems and equipment such as diesel generators and light carts. Responsibilities + Installs, removes, and operates electrical power generating and control systems, automatic transfer switches, aircraft arresting systems, and associated equipment. Checks equipment for serviceability. Positions equipment such as gasoline and diesel engines, generators, switchgears, air compressors, and other power generating auxiliary equipment. Installs, positions, rewinds, and pretensions aircraft arresting systems. Certifies aircraft arresting systems as required. Checks installed equipment to ensure compliance with publications, policies, and directives. Inspects, tests, and services component systems such as safety, fuel, lubrication, cooling, air pressure, pumps, regulators, governors, and accessory equipment. Observes and interprets instruments such as ammeters, voltmeters, frequency meters, synchro scopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges. Adjusts engine generator systems to maintain proper voltage, current frequency, and synchronization. Synchronizes multiple generators. Operates high and low voltage switches, circuit breakers, rheostats, and other controls on switchgear and distribution panels. Performs electrical power control and distribution functions. + Maintains, modifies, and repairs electrical power generating and control systems, automatic transfer switches, aircraft arresting systems, and associated equipment. Performs inspections and interprets findings to determine corrective action. Identifies and records engine and generator malfunctions. Uses precision test equipment, troubleshoots malfunctions, and inspects parts for excessive wear and other conditions. Removes, repairs, and replaces defective power generating equipment components. Performs corrosion control. Inspects and replaces gauges and meters. Maintains aircraft arresting systems, including electrical, hydraulic, rewind, and pneumatic systems, and other electronic components. Bench checks components and subassemblies. Tests and calibrates repaired items. Reviews performance data and maintenance records to determine adequacy of maintenance. Interprets data related to electrical power generating and aircraft arresting systems to ensure overall mission success. + Maintains records. Posts entries on operation, inspection, and maintenance records. Records meter readings, wear and alignment measurements, fuel consumption, and other data in performance logs. Furnishes information for reports and recommends changes to correct defective equipment or improve operating procedures. Complies with environmental policies. + Ensure all work areas and equipment are kept clean, orderly and in a safe manner. + Performs quality and safety self-inspections. + Responsible for proper utilization and safeguarding of all government and contractor provided property (e.g., to include government facilities, equipment and tools). + Perform other duties as assigned in accordance with contractual, functional, and mission requirements. Qualifications Minimum Qualifications Education/Certifications: + Prior military service of AFSC 3E072, Power Production Journeyman + Must be MAAS/BAK-12 Factory Trained &amp; Certified + High school diploma or equivalent. + Must be a U.S. Citizen with a current, valid U. S. Passport and Driver’s License (able to drive manual transmission). + Must have and maintain a valid U. S. SECRET Security Clearance prior to deployment. + Must have the capability of obtaining an Air Force flight line driver’s license. + Must be able to pass a flight line access test and obtain flight line access badge. + Must be able to pass employment and deployment qualification requirements that include psychological, medical, dental, drug testing, background checks, etc. + Candidates must successfully complete both online and hands on CBRN (chemical, biological, radiological and nuclear) defense training. Training includes the successful fit testing of DOD provided protective gear. Experience: + Must have four years of experience in operation and maintenance of BAK-12 aircraft arresting systems and completed factory training on Mobile Aircraft Arresting Systems (MAAS)/BAK-12. + Shall have knowledge of principles of electronics and electricity including generation, conversion, transformation, distribution and utilization. + Must have three years of experience operating and maintaining prime power spot generators and backup generators. Skills: + Must be capable of giving and receiving instructions. + Must be fluent reading and speaking English. + Able and willing to work periods of long hours to meet mission requirements. + Military experience in a contingency environment and knowledge and experience working with government contracts preferred. Other Requirements: + Work will be outdoors and indoors. Work in extreme outside temperatures reaching 115 degrees and winds reaching 30mph may be required. Exposure to cold, dust, noise, and chemicals may occur. Overtime and shift work may be required depending on contractual needs. Employee must comply with all Federal, State and Local regulations and published Company work rules as well as written instructions. Task specific work environment training will be provided as required. Must be prepared to function in a wartime environment to support U. S. interests. 100% Overseas Assignment. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Conducts VTC conferences, operates VTC equipment such as VTC conferencing equipment, consoles, Digital Video Recorders (DVD), cameras, microphones, desktop and laptop computers supporting VTC events. Reports to the Site Manager as required. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position. Responsibilities Coordinates with customer to endure equipment is operational. Sets-up and operates VTC equipment. Establishes end to end secure and non-secure connectivity to support conferences. Establishes proper cable connection and routing to various Audio/Video and communication links. Adjusts sound and light levels for optimum performance of equipment and comfort of customers. Troubleshoots VTC and connectivity problems with local and distant end technical control facilities and help-desks to restore communication and resolve poor reception/transmission issues. Troubleshoots equipment; configures modems and data timing and transfer rates. Resolves connectivity problems with technical personnel. Performs weekly maintenance on all associated VTC equipment. Operates, administers, and maintains the VTC Bridge. Required to manipulate the bridge to provide technical support for all VTC circuits attached. Performs other duties and assignments as required.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Security Clearance: Requires an active Secret Clearance</p><p>Education/Certifications: One year related experience may be substituted for one year of education, if degree is required. High School diploma or GED required.</p><p>Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience. Requires a minimum of 5 years experience in Video Teleconferencing or Audio Video Productions. Must be able to work rotating shift schedules which provide 24 hour day/7 day week coverage. Experience with a customer service-oriented company.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>As a Senior Program Specialist at Honeywell, you will play a crucial role in managing and executing complex Extra-Low Voltage (ELV) programs that enhance operational efficiency and customer satisfaction. You will be the operational backbone for critical systems—including Security, BMS, FAS, and ICT—navigating the complete project lifecycle from pre-sales engagement to final delivery. Your leadership will be vital in ensuring programs are delivered on time, within budget, and in alignment with Honeywell’s strategic objectives and quality standards.</p><br><br><span>Honeywell helps organizations solve the world's most complex challenges in automation, the future of aviation and energy transition. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments – powered by our Honeywell Forge software – that help make the world smarter, safer and more sustainable.</span><br>Responsibilities:<br><ul><li><strong>Project Execution</strong>: Lead the overall execution of ELV projects, with a focus on mainly airport projects, following best-in-class methodologies.</li><li><strong>Stakeholder Management:&nbsp;</strong>Serve as the primary point of contact for day-to-day activities with all project stakeholders, ensuring clear communication and satisfaction.</li><li><strong>Financial Performance:&nbsp;</strong>Monitor monthly financial measures including revenue recognition, margins, invoicing, and cash collection to drive a positive P&amp;L.</li><li><strong>Project Planning:&nbsp;</strong>Develop and implement comprehensive Project Management Plans, including Scope, Execution, Quality, and Procurement plans.</li><li><strong>Risk &amp; Change Management:&nbsp;</strong>Identify risks and develop mitigation plans while managing scope changes through variation orders and contract alignment.</li><li><strong>Sales Collaboration:&nbsp;</strong>Engage early with Sales and Estimation teams during bidding stages and lead the formal hand-over process.</li><li><strong>Performance Tracking:&nbsp;</strong>Monitor project performance against defined KPIs and utilize Honeywell’s operating systems, such as Cora PPM, for records management and forecasting.</li><li><span><strong>Health &amp; Safety:&nbsp;</strong>Manage all HSE-related project activities in strict coordination with the HSE department to ensure a safe work environment</span></li></ul><br>Qualifications:<br><ul><li><strong>Education:&nbsp;</strong>Bachelor’s degree in engineering (Electrical, Electronics, or relevant field).</li><li><strong>Experience:</strong> 10+ years of project management experience specifically with ELV Systems and Software Integrations.</li><li><strong>Language:</strong> Native or fluent proficiency in both Arabic and English.</li><li><strong>Technical Knowledge:</strong> Strong expertise in Security, BMS, and Fire Alarm Systems (FAS).</li><li><strong>Portfolio Management:</strong> Proven ability to manage a portfolio of projects concurrently while meeting tight deadlines under pressure.</li><li><strong>WE VALUE</strong></li><li><strong>Certification:</strong> Project Management Professional (PMP) certification is highly preferred.</li><li><strong>Domain Expertise:</strong> Prior experience managing large-scale projects in Airports, Smart Cities, or IoT domains.</li><li><strong>Contractual Acumen:</strong> Knowledge of contract types and the ability to effectively communicate with legal and contract teams.</li><li><strong>Leadership Skills:</strong> A proactive approach to problem-solving, strong negotiation skills, and the ability to lead cross-functional teams.</li><li><strong>Software Proficiency:</strong> Familiarity with project management tools (e.g., MS Office, Cora PPM) and SAP modules.</li></ul><p>We are an equal opportunity employer and value diversity at our company. We do&nbsp;not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.</p><br><p>We will ensure that individuals with disabilities are provided reasonable accommodation to&nbsp;participate in the job application or interview process, to&nbsp;perform crucial job functions, and to&nbsp;receive other benefits and privileges of employment. Please contact us to&nbsp;request accommodation.</p><br> </div>

<p>We know that a business only thrives if our people are thriving. That s why we always put our people first. Our global and diverse team would be happy to support you and challenge you to grow in many ways. Who knows where our joint journey will take you? Siemens strongly believes in the value of a Digital Portfolio, hence Smart Infrastructure combines Digital Power Distribution and Digital Building Infrastructure technologies. Our Digital Portfolio will enable our customers to enjoy occupant s intuitive buildings which are comfortable, safe, secure and energy efficient. Smart infrastructure thoughtfully connects energy systems, buildings and industries to adapt and evolve the way we live and work. We work together with customers and partners to build an ecosystem that intuitively responds to the needs of people and helps customers to better use resources. It helps our customers to thrive, communities to progress and supports sustainable development. Join our Smart Infrastructure GridSoftware division as the Telecommunications specialist and help us re-imagine the world by finding solutions and making the world a more inquisitive place for tomorrow. You ll make a difference by Lead the installation and commissioning of communication systems tailored to customer requirements. Ensure maintenance and troubleshooting of telecommunication equipment at substations. Participate in call duty and regular troubleshooting operations. Prepare detailed technical reports, protocols, and approval documentation for internal teams and customers. Create and update design documentation via AutoCAD. Read and interpret technical drawings, cable plans, and site layouts accurately. Coordinate telemetry installation works in new substations, including panels, batteries, chargers, and cabling. Collaborate with cross-functional teams to ensure smooth project delivery and high-quality customer outcomes. Monitor and recommend improvements for telecommunication systems and procedures. Stay up-to-date with emerging technologies and best practices within the industry.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum 5 years of experience in telecommunication technologies within power grids.</li><li>Hands-on experience with PDH, SDH, MPLS-TP, routing, and switching.</li><li>Knowledge of MPLS-TP &amp; NMS for Infinera and Huawei, Digital Inter-trip equipment, Siemens L3/L2 equipment, and Fortinet Firewalls.</li><li>Strong technical documentation skills and ability to translate plans into actionable site tasks.</li><li>Excellent problem-solving, troubleshooting, and organizational abilities.</li><li>Experience working in international or multi-cultural teams.</li><li>Comfortable working on-site in a fast-paced, high-pressure environment.</li><li>Strong communication skills, with the ability to interact effectively with customers and internal stakeholders.</li><li>Proactive mindset with a drive to learn and adapt to new technologies.</li></ul>

<p>The Leidos Defense Sector is hiring a Field Service Technician to support US Army Central G2. The program provides IT repair, maintenance, operations, logistics, and engineering services to help ensure secure, reliable, and uninterrupted availability of Army Military Intelligence Enterprise IT Systems as well as network administration support for an organization comprised mostly of a Microsoft Enterprise software environment residing on multiple networks. The Field Service Technician will be part of a dynamic team supporting customers throughout the ARCENT Area of Responsibility including both U.S. and coalition personnel. This is a deployed position located at Camp Arifjan, Kuwait. Duty hours are 12 hours per day, 7 days per week, and are subject to local labor laws. This position also requires 24/7 on call availability, including weekends and holidays.</p><p>Primary Responsibilities:</p><ul><li>Provide Tier I and II customer service support as part of a service desk team across multiple networks, facilities, and locations (in-person telephonically or electronically submitted via ticket system); escalate incidents to higher Tier II or Tier III when required</li><li>Complete basic and advanced hardware and infrastructure work including cable management at both workstations and in-server rooms, workstation installations, checking UPS systems, replacing hardware components of laptops &amp; desktops, basic printer maintenance, etc.</li><li>Remediate problems with Windows desktops, laptops, printers, digital senders, video teleconference systems, VOIPs</li><li>Execute basic Active Directory tasks and manage NTFS permissions such as share folder access, etc.</li><li>Troubleshoot, diagnose, and resolve software issues with MS Office and Outlook, Adobe, Java, PKIs</li><li>Apply patches and updates to workstations both locally and remotely, and using PowerShell, RDP</li><li>Track all work in designated incident database tools &amp; systems (such as Remedy), ensure tickets are completed accurately and in a timely manner</li><li>Support In &amp; Out process users, including creating accounts, setting up workstations, mapping drives, and printers</li><li>Schedule and de-conflict Video Teleconferences</li><li>Conduct site surveys and installation of IT equipment</li><li>Participate in or lead special projects and day to day operations as needed or assigned by the site lead, including surging to alternate locations for customer requirements or to backfill personnel during R&amp;R or other absences</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Basic Qualifications:</strong></p><ul><li>Bachelor's degree and 2+ years of prior relevant experience. Additional years of experience may be considered in lieu of a degree.</li><li>Active TS/SCI security clearance (in DISS).</li><li>Active 8570 IAT II (or higher) Baseline Certification, such as: Security+|ce.</li><li>Active Windows Computing Environment certification, such as: MS-900: Microsoft 365 Fundamentals, MD-102: Microsoft 365: Endpoint administrator Associate, etc., or the ability to obtain after hire.</li><li>Experience resolving Tier I and II hardware, software and application issues (printer, basic network (LAN), scheduling &amp; troubleshooting video tele-conferences (VTCs).</li><li>Working knowledge of Active Directory Users &amp; Computers, security groups/NTFS permissions, Cisco network/LAN principles, MS Windows 11, MS Office, desktop &amp; laptop hardware, etc.</li><li>Ability to work 12-hour shifts on-site, 7 days per week.</li><li>On-call availability 24x7, including weekends and holidays.</li><li>Current U.S. passport with at least 36 months validity and 5 blank pages.</li><li>Must successfully complete CRC processing and medical screening and be designated fit for deployment (including medical tests and BMI analysis).</li><li>Must obtain and maintain host nation work visa, including required local/regional medical testing.</li><li>Must be willing to live and work in the State of Kuwait or deploy to austere forward locations as required.</li><li>Must comply with all corporate policies, local site policies, host nation laws, customs, and courtesies.</li></ul><p><strong>Preferred Qualifications:</strong></p><ul><li>Active IT certification, such as: AZ-802:Windows Server hybrid administrator, CCNA, VCTA, NCDA.</li><li>Experience with US Intelligence networks and organizations in South-West Asia or on a Camp Arifjan service desk.</li><li>AMSOPP1</li></ul>

<p>The Leidos Defense Sector is hiring a Field Service Technician to support US Army Central G2. The program provides IT repair, maintenance, operations, logistics, and engineering services to help ensure secure, reliable, and uninterrupted availability of Army Military Intelligence Enterprise IT Systems as well as network administration support for an organization comprised mostly of a Microsoft Enterprise software environment residing on multiple networks. The Field Service Technician will be part of a dynamic team supporting customers throughout the ARCENT Area of Responsibility including both U.S. and coalition personnel. This is a deployed position located at Camp Arifjan, Kuwait. Duty hours are 12 hours per day, 7 days per week, and are subject to local labor laws. This position also requires 24/7 on call availability, including weekends and holidays.</p><p>Primary Responsibilities:</p><ul><li>Provide Tier I and II customer service support as part of a service desk team across multiple networks, facilities, and locations (in-person telephonically or electronically submitted via ticket system); escalate incidents to higher Tier II or Tier III when required</li><li>Complete basic and advanced hardware and infrastructure work including cable management at both workstations and in-server rooms, workstation installations, checking UPS systems, replacing hardware components of laptops &amp; desktops, basic printer maintenance, etc.</li><li>Remediate problems with Windows desktops, laptops, printers, digital senders, video teleconference systems, VOIPs</li><li>Execute basic Active Directory tasks and manage NTFS permissions such as share folder access, etc.</li><li>Troubleshoot, diagnose, and resolve software issues with MS Office and Outlook, Adobe, Java, PKIs</li><li>Apply patches and updates to workstations both locally and remotely, and using PowerShell, RDP</li><li>Track all work in designated incident database tools &amp; systems (such as Remedy), ensure tickets are completed accurately and in a timely manner</li><li>Support In &amp; Out process users, including creating accounts, setting up workstations, mapping drives, and printers</li><li>Schedule and de-conflict Video Teleconferences</li><li>Conduct site surveys and installation of IT equipment</li><li>Participate in or lead special projects and day to day operations as needed or assigned by the site lead, including surging to alternate locations for customer requirements or to backfill personnel during R&amp;R or other absences</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree and 2+ years of prior relevant experience. Additional years of experience may be considered in lieu of a degree. Active TS/SCI security clearance (in DISS). Active 8570 IAT II (or higher) Baseline Certification, such as: Security+|ce. Active one Windows Computing Environment certification, such as: MS-900: Microsoft 365 Fundamentals, MD-102: Microsoft 365: Endpoint administrator Associate, etc. Experience resolving Tier I and II hardware, software and application issues (printer, basic network (LAN), scheduling &amp; troubleshooting video tele-conferences (VTCs). Working knowledge of Active Directory Users &amp; Computers, security groups/NTFS permissions, Cisco network/LAN principles, MS Windows 11, MS Office, desktop &amp; laptop hardware, etc. Ability to work 12-hour shifts on-site, 7 days per week. On-call availability 24x7, including weekends and holidays. Current U.S. passport with at least 36 months validity and 5 blank pages. Must successfully complete CRC processing and medical screening and be designated fit for deployment (including medical tests and BMI analysis). Must obtain and maintain host nation work visa, including required local/regional medical testing. Must be willing to live and work in the State of Kuwait or deploy to austere forward locations as required. Must comply with all corporate policies, local site policies, host nation laws, customs, and courtesies.</p><p>Preferred Qualifications: Active IT certification, such as: AZ-802:Windows Server hybrid administrator, CCNA, VCTA, NCDA. Experience with US Intelligence networks and organizations in South-West Asia or on a Camp Arifjan service desk. AMSOPP1</p>

<p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p><p>Responsible for operating and maintaining power generation and aircraft arresting systems in accordance with the performance work statement. Operation and maintenance services inlude, but are not limited to: catapults, arresting gear, and associated mechanical, hydraulic, and control systems involved primarily in aircraft takeoff and landing operations. Duties include installing and maintaining visual landing aids; testing and maintaining launch and recovery equipment using electric and mechanical test equipment and hand tools; activating airfield arresting systems, such as crash barriers and cables, during emergency landing situations; directing aircraft launch and recovery operations using hand or light signals; and maintaining logs of airplane launches, recoveries, and equipment maintenance. Provide operation, maintenance, inspection, and repair of power generation systems and equipment such as diesel generators and light carts.</p><p><strong>Responsibilities</strong></p><ul><li>Installs, removes, and operates electrical power generating and control systems, automatic transfer switches, aircraft arresting systems, and associated equipment.</li><li>Checks equipment for serviceability.</li><li>Positions equipment such as gasoline and diesel engines, generators, switchgears, air compressors, and other power generating auxiliary equipment.</li><li>Installs, positions, rewinds, and pretensions aircraft arresting systems.</li><li>Certifies aircraft arresting systems as required.</li><li>Checks installed equipment to ensure compliance with publications, policies, and directives.</li><li>Inspects, tests, and services component systems such as safety, fuel, lubrication, cooling, air pressure, pumps, regulators, governors, and accessory equipment.</li><li>Observes and interprets instruments such as ammeters, voltmeters, frequency meters, synchro scopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges.</li><li>Adjusts engine generator systems to maintain proper voltage, current frequency, and synchronization.</li><li>Synchronizes multiple generators.</li><li>Operates high and low voltage switches, circuit breakers, rheostats, and other controls on switchgear and distribution panels.</li><li>Performs electrical power control and distribution functions.</li><li>Maintains, modifies, and repairs electrical power generating and control systems, automatic transfer switches, aircraft arresting systems, and associated equipment.</li><li>Performs inspections and interprets findings to determine corrective action.</li><li>Identifies and records engine and generator malfunctions.</li><li>Uses precision test equipment, troubleshoots malfunctions, and inspects parts for excessive wear and other conditions.</li><li>Removes, repairs, and replaces defective power generating equipment components.</li><li>Performs corrosion control.</li><li>Inspects and replaces gauges and meters.</li><li>Maintains aircraft arresting systems, including electrical, hydraulic, rewind, and pneumatic systems, and other electronic components.</li><li>Bench checks components and subassemblies.</li><li>Tests and calibrates repaired items.</li><li>Reviews performance data and maintenance records to determine adequacy of maintenance.</li><li>Interprets data related to electrical power generating and aircraft arresting systems to ensure overall mission success.</li><li>Maintains records.</li><li>Posts entries on operation, inspection, and maintenance records.</li><li>Records meter readings, wear and alignment measurements, fuel consumption, and other data in performance logs.</li><li>Furnishes information for reports and recommends changes to correct defective equipment or improve operating procedures.</li><li>Complies with environmental policies.</li><li>Ensure all work areas and equipment are kept clean, orderly and in a safe manner.</li><li>Performs quality and safety self-inspections.</li><li>Responsible for proper utilization and safeguarding of all government and contractor provided property (e.g., to include government facilities, equipment and tools).</li><li>Perform other duties as assigned in accordance with contractual, functional, and mission requirements.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Prior military service of AFSC 3E072, Power Production Journeyman</li><li>Must be MAAS/BAK-12 Factory Trained &amp; Certified</li><li>High school diploma or equivalent.</li><li>Must be a U.S. Citizen with a current, valid U. S. Passport and Driver s License (able to drive manual transmission).</li><li>Must have and maintain a valid U. S. SECRET Security Clearance prior to deployment.</li><li>Must have the capability of obtaining an Air Force flight line driver s license.</li><li>Must be able to pass a flight line access test and obtain flight line access badge.</li><li>Must be able to pass employment and deployment qualification requirements that include psychological, medical, dental, drug testing, background checks, etc.</li><li>Candidates must successfully complete both online and hands on CBRN (chemical, biological, radiological and nuclear) defense training. Training includes the successful fit testing of DOD provided protective gear.</li><li>Must have four years of experience in operation and maintenance of BAK-12 aircraft arresting systems and completed factory training on Mobile Aircraft Arresting Systems (MAAS)/BAK-12.</li><li>Shall have knowledge of principles of electronics and electricity including generation, conversion, transformation, distribution and utilization.</li><li>Must have three years of experience operating and maintaining prime power spot generators and backup generators.</li><li>Must be capable of giving and receiving instructions.</li><li>Must be fluent reading and speaking English.</li><li>Able and willing to work periods of long hours to meet mission requirements.</li><li>Military experience in a contingency environment and knowledge and experience working with government contracts preferred.</li><li>Work will be outdoors and indoors.</li><li>Work in extreme outside temperatures reaching 115 degrees and winds reaching 30mph may be required.</li><li>Exposure to cold, dust, noise, and chemicals may occur.</li><li>Overtime and shift work may be required depending on contractual needs.</li><li>Employee must comply with all Federal, State and Local regulations and published Company work rules as well as written instructions.</li><li>Task specific work environment training will be provided as required.</li><li>Must be prepared to function in a wartime environment to support U. S. interests.</li><li>100% Overseas Assignment.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>About Surbana Jurong</b></p><br><p>Surbana Jurong Group (SJ) is a leading global urban, infrastructure, and engineering consulting firm headquartered in Singapore. Driven by a vision to build cities and shape lives, SJ delivers sustainable, innovative, and integrated solutions across the built environment. With a strong presence across Asia, the Middle East, and Africa, SJ provides multidisciplinary expertise in transport, ports, marine, water, energy, buildings, and large-scale infrastructure projects.</p><br><p>SJ partners with governments, multilateral development agencies, and private sector clients to plan, design, supervise, and manage complex infrastructure projects throughout their lifecycle. By combining global expertise with local knowledge, SJ delivers practical, high-impact solutions that enhance connectivity, strengthen communities, and support long-term sustainable development.</p><br><p><b>The role</b></p><br><p>We are seeking an experienced <b>Senior Pipeline Infrastructure Engineer/</b> <b>Senior Pipeline &amp; Utilities Engineer</b> to support the delivery of major water, utility, and infrastructure projects. The successful candidate will provide technical oversight of pipeline construction, installation, testing, quality assurance, and commissioning activities, ensuring works are delivered safely, efficiently, and in accordance with project specifications and industry standards.</p><br><ul><li>Provide technical supervision of pipeline installation and construction activities, including transmission pipelines, valves, chambers, and associated infrastructure works.</li><li>Review engineering drawings, alignment plans, welding and jointing procedures, construction methodologies, and contractor submissions.</li><li>Monitor installation, inspection, testing, commissioning, and performance verification activities to ensure compliance with project requirements.</li><li>Support hydrostatic testing, pressure testing, pipeline integrity assessments, and acceptance testing processes.</li><li>Oversee trenching, bedding, backfilling, reinstatement, and associated civil works related to pipeline construction activities.</li><li>Coordinate with contractors, utility stakeholders, and multidisciplinary project teams to facilitate successful project execution.</li><li>Ensure compliance with applicable specifications, standards, quality assurance requirements, and safety procedures.</li><li>Maintain inspection records, technical documentation, defect registers, and project reporting requirements.</li><li>Review as-built documentation, completion records, and handover deliverables for pipeline infrastructure projects.</li><li>Provide technical expertise in troubleshooting, risk mitigation, construction planning, and project performance improvement initiatives.</li></ul><p>With a track record of achievement in a related role, you will have gained your experience in a consultancy environment and have a passion for building trusted relationships to drive positive change and win new work.</p><br><p>Suitable applicants will have/be:</p><br><ul><li>Bachelor’s Degree in Civil Engineering, Mechanical Engineering, or a related discipline.</li><li>Minimum 15 years’ experience in pipeline engineering, construction supervision, or delivery of major infrastructure projects.</li><li>Demonstrated experience with large-diameter transmission pipelines, utility networks, or major water conveyance systems.</li><li>Strong knowledge of pipeline construction methodologies, welding and jointing practices, pressure testing, quality assurance, and inspection procedures.</li><li>Proven experience managing both pipeline and associated civil works activities during construction phases.</li><li>Experience reviewing engineering drawings, technical specifications, contractor documentation, and construction methodologies.</li><li>Knowledge of pipeline commissioning, operational readiness, and asset handover processes.</li><li>Experience with trenchless works, utility crossings, road crossings, or complex pipeline installation environments.</li><li>Excellent communication, stakeholder management, and technical reporting skills with strong English language proficiency.</li></ul><p>Surbana Jurong Group is an equal opportunity employer. We believe that diversity, equity, and inclusion strengthen our people, enrich our perspectives, and enable us to deliver better outcomes for our clients, partners, and the communities we serve.</p><br><p><b>How to apply </b></p><br><p>All applications must be submitted online and for a confidential discussion regarding this opportunity, please contact<b>&nbsp;Taimoor Tariq - </b><b>Taimoor.tariq@sjgroup.com</b></p><br><p>For further information about Surbana Jurong Group, please visit our website at www.surbanajurong.com.</p><br><p>To explore career opportunities and learn more about working with SJ Group, please visit our Careers page at SJ Careers.</p><br><p>All recruitment activities are managed by the Recruitment &amp; Talent team. At this stage, this position does not require agency support. Kindly do not forward resumes directly to SJ Group employees.</p><br><p>At Surbana Jurong, we put talent, hard work, teamwork and a fun workplace together to approach problems and solve them creatively and collaboratively. Join us in making a positive impact on the world!</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>IT Support Officer</p><p><b>Location:</b> Dajeej, Kuwait</p><p><br></p><p>Job Summary</p><p>We are seeking a dedicated and proactive IT Support Officer to join our team. The successful candidate will be responsible for supporting the organization's daily IT operations, including CCTV systems, network infrastructure, computers, printers, and user support. The ideal candidate should be technically skilled, eager to learn, and capable of handling multiple IT tasks in a fast-paced environment.</p><p><br></p><p>Key Responsibilities</p><ul><li>Monitor, operate, and troubleshoot CCTV surveillance systems.</li><li>Install, configure, and maintain IP and analog CCTV cameras.</li><li>Perform network cable installation, termination, and testing.</li><li>Configure and troubleshoot routers, switches, wireless access points, and network devices.</li><li>Install, configure, and maintain Windows operating systems.</li><li>Install, upgrade, and troubleshoot computer hardware and software.</li><li>Install, configure, and maintain printers, scanners, and other office equipment.</li><li>Create and manage user accounts, email accounts, and shared folders.</li><li>Configure network printers and file sharing.</li><li>Perform routine preventive maintenance on IT equipment.</li><li>Respond to user support requests and resolve technical issues promptly.</li><li>Maintain inventory records of IT equipment and accessories.</li><li>Coordinate with third-party vendors for IT-related services when required.</li><li>Assist in IT documentation, backups, and system maintenance.</li><li>Ensure all IT equipment is functioning efficiently and report any major issues to the IT Manager.</li><li>Support the installation of new IT equipment and office setups.</li></ul><p><br></p><p>Requirements</p><p><br></p><ul><li>Diploma or Bachelor's degree in Information Technology, Computer Science, or a related field.</li><li>1-3 years of experience in IT support or a similar role.</li><li>Good knowledge of Windows 10/11 installation, configuration, and troubleshooting.</li><li>Basic understanding of TCP/IP, LAN/WAN, DNS, DHCP, VPN, and network troubleshooting.</li><li>Experience with IP CCTV systems and DVR/NVR configuration.</li><li>Knowledge of structured cabling and network rack organization.</li><li>Experience installing and troubleshooting printers and multifunction devices.</li><li>Familiarity with Microsoft Office 365 and Outlook.</li><li>Basic knowledge of Active Directory and user account management.</li><li>Experience with antivirus software, system updates, and endpoint security.</li><li>Ability to diagnose hardware faults and replace computer components.</li><li>Good problem-solving and communication skills.</li><li>Ability to work independently and as part of a team.</li><li>Willingness to work flexible hours when required.</li><li>Valid Kuwait driving license will be an added advantage.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Strong troubleshooting and analytical thinking skills.</p><p>Hands-on experience with CCTV, networking, and end-user support.</p><p>Good understanding of IT hardware, peripherals, and office equipment.</p><p>Ability to prioritize tasks and manage multiple support requests efficiently.</p><p>Strong attention to detail and commitment to maintaining accurate records.</p><p>Good customer service skills with a professional and helpful attitude.</p><p>Ability to communicate technical issues clearly to non-technical users.</p><p>Basic knowledge of server support and backup procedures.</p><p>Familiarity with Microsoft Windows Server environments is an advantage.</p><p>Experience with remote support tools and ticketing systems is a plus.</p><p>Ability to work under pressure and respond quickly to urgent issues.</p><p>Willingness to learn new technologies and adapt to changing IT needs.</p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Leidos Defense Sector is hiring a <b>Field Service Technician</b> to support US Army Central G2. The program provides IT repair, maintenance, operations, logistics, and engineering services to help ensure secure, reliable, and uninterrupted availability of Army Military Intelligence Enterprise IT Systems as well as network administration support for an organization comprised mostly of a Microsoft Enterprise software environment residing on multiple networks.</p> <p> </p> <p>The Field Service Technician will be part of a dynamic team supporting customers throughout the ARCENT Area of Responsibility including both U.S. and coalition personnel.</p> <p> </p> <p>This is a deployed position located at Camp Arifjan, Kuwait.</p> <p> </p> <p>Duty hours are 12 hours per day, 7 days per week, and are subject to local labor laws. This position also requires 24/7 on call availability, including weekends and holidays.</p> <p> </p> <p> <b>Primary Responsibilities: </b> </p> <ul> <li>Provide Tier I and II customer service support as part of a service desk team across multiple networks, facilities, and locations (in-person telephonically or electronically submitted via ticket system); escalate incidents to higher Tier II or Tier III when required</li> <li>Complete basic and advanced hardware and infrastructure work including cable management at both workstations and in-server rooms, workstation installations, checking UPS systems, replacing hardware components of laptops &amp; desktops, basic printer maintenance, etc.</li> <li>Remediate problems with Windows desktops, laptops, printers, digital senders, video teleconference systems, VOIPs</li> <li>Execute basic Active Directory tasks and manage NTFS permissions such as share folder access, etc.</li> <li>Troubleshoot, diagnose, and resolve software issues with MS Office and Outlook, Adobe, Java, PKIs</li> <li>Apply patches and updates to workstations both locally and remotely, and using PowerShell, RDP</li> <li>Track all work in designated incident database tools &amp; systems (such as Remedy), ensure tickets are completed accurately and in a timely manner</li> <li>Support In &amp; Out process users, including creating accounts, setting up workstations, mapping drives, and printers</li> <li>Schedule and de-conflict Video Teleconferences</li> <li>Conduct site surveys and installation of IT equipment</li> <li>Participate in or lead special projects and day to day operations as needed or assigned by the site lead, including surging to alternate locations for customer requirements or to backfill personnel during R&amp;R or other absences</li> </ul> <p> </p> <p> <b>Basic Qualifications:</b> </p> <ul> <li>Bachelor's degree and 2+ years of prior relevant experience. Additional years of experience may be considered in lieu of a degree.</li> <li>Active TS/SCI security clearance (in DISS).</li> <li>Active 8570 IAT II (or higher) Baseline Certification, such as: Security+|ce.</li> <li>Active one Windows Computing Environment certification, such as: MS-900: Microsoft 365 Fundamentals, MD-102: Microsoft 365: Endpoint administrator Associate, etc.</li> <li>Experience resolving Tier I and II hardware, software and application issues (printer, basic network (LAN), scheduling &amp; troubleshooting video tele-conferences (VTCs).</li> <li>Working knowledge of Active Directory Users &amp; Computers, security groups/NTFS permissions, Cisco network/LAN principles, MS Windows 11, MS Office, desktop &amp; laptop hardware, etc.</li> <li>Ability to work 12-hour shifts on-site, 7 days per week.</li> <li>On-call availability 24x7, including weekends and holidays.</li> <li>Current U.S. passport with at least 36 months validity and 5 blank pages.</li> <li>Must successfully complete CRC processing and medical screening and be designated fit for deployment (including medical tests and BMI analysis).</li> <li>Must obtain and maintain host nation work visa, including required local/regional medical testing.</li> <li>Must be willing to live and work in the State of Kuwait or deploy to austere forward locations as required.</li> <li>Must comply with all corporate policies, local site policies, host nation laws, customs, and courtesies.</li> </ul> <p> </p> <p> <b>Preferred Qualifications: </b> </p> <ul> <li>Active IT certification, such as: AZ-802:Windows Server hybrid administrator, CCNA, VCTA, NCDA.</li> <li>Experience with US Intelligence networks and organizations in South-West Asia or on a Camp Arifjan service desk.</li> </ul> <p> </p> <p>AMSOPP1</p> <p> </p> <p>If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 and moving faster than anyone else dares.</p> <u> <b>Original Posting:</b> </u> June 12, 2026<div> <div> <div> <div> <div> <div> <div> <p> </p> <p>For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.</p> </div> </div> </div> </div> </div> </div> </div> <div> </div> <p> </p> <b> <u>Pay Range:</u> </b> Pay Range $59,150.00 - $106,925.00<p> </p> <p>The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.</p></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><br></p><p>Responsibilities</p><p><br></p><p>a) The primary purpose of this job is to conduct daily inspections of Lifting Equipment as required.</p><p>b) He shall be capable of handling customer technical queries related to lifting equipment and providing technical support,</p><p>guidance, and assistance to field inspectors.</p><p>c) As a LEEA certified “Competent Person” he/she should be qualified to test, examine and ensure that lifting equipment/lifting</p><p>accessories are safe before being put into or reintroduced into service.</p><p>d) He should be familiar with the prevailing standards viz-a-vis BS, ASME, ISO, API, DNV, L.E.E.A Code of practice and other</p><p>relevant local or regional standards.</p><p>e) He should be capable of conducting a thorough examination of an offshore container and making recommendations with</p><p>regards to those lifting accessories best suited for a given container as per DNV 2.7-1 and BS EN 12079 pt.2:2006, if so required.</p><p>f) He should be capable of conducting thorough examination of steel framed units and cargo baskets.</p><p>g) He shall be capable of conducting a thorough examination of powered lifting equipment, particularly Mobile Crane, Overhead</p><p>travelling Crane and Gantry cranes.</p><p>h) He shall be capable of conducting a thorough examination of manually operated LE devices particularly chain blocks, lever</p><p>blocks, cable pulling machines, hydraulic jacks, pulley blocks etc.</p><p>i) He shall be capable of conducting a thorough examination of lifting gears particularly shackles, wire rope slings, chain slings,</p><p>webbing slings, swivels, eye bolts etc.</p><p>j) He shall be capable of conducting SIGS standard NDT techniques on lifting equipment, handling/hoisting tools and Rig sub-</p><p>structure and derrick mast structure as per API 4G, 8B and 7K recommended practice. In this regard, NDT training for LE</p><p>inspectors will focus mainly on Magnetic Particle Testing, Liquid Penetrant Testing, Visual Testing, Eddy Current Testing using</p><p>single or dual frequency impedance plane graphical output EC detectors, Ultrasonic Thickness Gaging and Ultrasonic Flaw</p><p>Detection.</p><p>k) He shall be capable of conducting DROPS Survey for the rig structure and related accessories.</p><p>l) Be capable of supervising and providing hands-on training to trainees in the field.</p><p>m) Interpret and evaluate inspection findings against the applicable specifications and prepare professional reports against the</p><p>same.</p><p>n) He/she shall be capable of conducting manual operations such equipment cleaning, painting, stamping, moving/pushing/</p><p>pulling activities while in the field.</p><p><br></p><p>4 Accountability a) Accountable to the Field Supervisor and Inspection Manager, in that order, against all duties highlighted above.</p><p>5 Authority a) Authorized to independently conduct NDT, DROPS and Lifting equipment / accessories inspections for which training has been</p><p><br></p><p>received as well as sign and issue inspection reports/certificates against the same.</p><p>b) Authorized to supervise field inspections for level I NDT inspectors, LE trainees and helpers.</p><p>c) Authorized to quarantine any defective item and duly designate/mark the same as such.</p><p>d) Authorized to stop any unsafe conditions if observed in the workplace.</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><br></p><p> a) Completion of a University degree.</p><p>b) Minimum Engineering Diploma or Science Graduate</p><p>c) Possess at least 2 of the major LEEA Qualifications or equivalent.</p><p>d) Possess at least 5 (MT,PT,UT,VT,ET) of the NDT Level II Qualifications.</p><p>e) Completed the applicable internal lifting trainings.</p><p>f) Basic Orientation on SIGS OPM, Quality Manuals and HSE Requirements.</p><p>g) Basic Orientation on the relevant local &amp;amp; regional inspection requirements.</p><p>h) Possess the applicable government related LEI approvals .</p><p>i) Over one and up through two years LEI field experience.</p><p><br></p><p>2 Organizational</p><p>Knowledge</p><p><br></p><p>a) Know the overall Inspection Department Structure as well as the full inspection process.</p><p>b) Know the contents of the applicable regional/country-specific regulations as well as the applicable technical /administrative</p><p>standards and specifications.</p><p>c) Possess Operational knowledge of the applicable field inspection equipment used by the organization.</p><p>d) Knowledge of how to read, interpret and apply inspection procedures, standards, specifications, Eng. Drawings and/or OEM</p><p>manuals, as applicable.</p><p>e) Basic knowledge of engineering principles &amp;amp; operational aspects of field inspection equipment in relation to mechanical,</p><p>electrical, electronic, magnetic, pneumatic and/or hydraulic systems of operation, especially in relation to lifting matters.</p><p>f) Knowledge of basic calibration and maintenance procedures/requirements applicable to field inspection equipment.</p><p>g) Knowledge of proper PPE to be worn during field operations.</p><p><br></p></div>

<p><h4>Division / Project</h4> <p>KBR's Sustainable Technology Solutions (STS) group is seeking a Project Engineer I – Building & Office Tower Projects to support the planning, design, procurement, construction, and commissioning of office towers, administration buildings, control centers, and associated facility infrastructure under PMC contracts.</p> <h4>Primary objectives</h4> <ul> <li>Management of support services for supervising and directing engineering, procurement, and management of construction contractors appointed by the client.</li> <li>Ensure the successful delivery of projects through all phases, including concept design, FEED, detailed engineering, tendering, construction, commissioning, and handover.</li> <li>Act as primary technical coordination interface with client to ensure that the client’s expectations are satisfied.</li> <li>Ensure the project conforms to the client’s approved basis of design and local authority requirements, building regulations, sustainability objectives, and applicable international codes and standards.</li> <li>Coordinate architectural, structural, MEP, fire protection, security, ICT, vertical transportation, and interior fit-out disciplines to achieve an integrated design solution.</li> </ul> <h4>Responsibilities</h4> <ul> <li>Support project mobilization, setup, takeover, and handover activities.</li> <li>Set up, take over / hand over of projects.</li> <li>Establish clear objectives and deliverables for design consultants and engineering teams.</li> <li>Management of PMC’s engineering teams during FEED. Prepare and review scopes of work, technical specifications, employer requirements, and tender documentation.</li> <li>Compilation of the scope of work documents, technical part of invitation to bid documents, and the documentation of project milestone reviews.</li> <li>Coordination of reviews and comments on engineering and other technical deliverables of third-party companies like P&IDs, line lists, equipment datasheets, instrumentation index, cable routing, etc. within the agreed review time.</li> <li>Ensure compliance with all applicable project standards and specifications.</li> <li>Ensure proper compilation and updating of as-built documents, redlines, MTOs, loop folders, commissioning binders, and handover documentation.</li> <li>Ensure the delivery of the as-built (end of job) documentation to the client in time and good quality.</li> <li>Contribute to the development of overall project schedule.</li> <li>Ensure work progress as per approved schedule in close cooperation with project controls team.</li> <li>Set up and regularly maintain a project dashboard in close cooperation with project controls team.</li> <li>Monitor with support of the project controls team cost aspects of the project within direct control to forecast final costs, trends, and take action to avoid cost overruns.</li> <li>Evaluate earned value / value of work for project completion with support of the project controls team.</li> <li>Build and maintain a healthy relationship with clients and act as project focal point for the client.</li> <li>Proactively resolve scope and schedule issues with the third-party contractor as they arise.</li> <li>Know the contract between the FEED- or EPC-contractor and between the client and third-party contracts.</li> <li>Know the PMC contract between KBR and the client.</li> <li>Ensure change order recording and participation from project team in technical parts of change order assessment.</li> <li>Regularly provide input to project reports to internal project management and the clients.</li> <li>Assess and provide feedback on third-party contractor’s project reports.</li> <li>Define and communicate team’s priorities such as achievement of milestones and other key project objectives.</li> <li>Listen to the team, discuss the issues, resolve problems, and direct activities to remove roadblocks and achieve objectives.</li> <li>Effective communication with the design and engineering teams (inside PMC and third parties) and other project stakeholders like operations, maintenance, etc.</li> <li>Regularly chair and record project team meetings within the PMC organisation and with the client and with the third-party contractors or consultants.</li> <li>Responsible for preparation and status tracking of all projects related correspondence and transmittals / project documents.</li> <li>Perform together with relevant discipline engineers technical bid evaluations (TBE) and award recommendations.</li> <li>Participate or delegate participation of discipline engineers in factory and site acceptance tests.</li> </ul> <h4>Qualifications including required education, experience, & skills</h4> <ul> <li>B. Sc. Eng from an accredited college or university.</li> <li>Minimum 15 years post-graduation total experience.</li> <li>Minimum 10 years experience post qualification in infrastructure, buildings projects.</li> <li>Minimum 5 years of experience in a senior project engineer / project manager role.</li> <li>Must have demonstrated ability of effective functioning in a multi-cultural environment, preferably in the Middle East.</li> </ul> <h4>Essential skills / experience</h4> <ul> <li>Project planning and execution.</li> <li>Multidisciplinary design coordination.</li> <li>Commercial and contract awareness.</li> <li>Construction and commissioning management.</li> <li>Stakeholder engagement and client management.</li> <li>Problem-solving and decision-making.</li> <li>Strong written and verbal communication skills.</li> <li>Presentation and reporting skills.</li> <li>Leadership and team coordination.</li> <li>Risk management and change control.</li> <li>Proficiency with project management and BIM platforms.</li> <li>Analysis and problem solving.</li> <li>Creativity / innovation.</li> <li>Communications, written and oral.</li> <li>Ability to influence and persuade.</li> <li>Decarbonization – energy transition – sustainability.</li> </ul> <p><strong>Belong. Connect. Grow. with KBR!</strong></p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Leidos Defense Sector is hiring a <b>Field Service Technician</b> to support US Army Central G2.  The program provides IT repair, maintenance, operations, logistics, and engineering services to help ensure secure, reliable, and uninterrupted availability of Army Military Intelligence Enterprise IT Systems as well as network administration support for an organization comprised mostly of a Microsoft Enterprise software environment residing on multiple networks.</p><br><p>The Field Service Technician will be part of a dynamic team supporting customers throughout the ARCENT Area of Responsibility including both U.S. and coalition personnel.</p><br><p>This is a deployed position located at Camp Arifjan, Kuwait.</p><br><p>Duty hours are 12 hours per day, 7 days per week, and are subject to local labor laws. This position also requires 24/7 on call availability, including weekends and holidays.</p><br><p><b>Primary Responsibilities: </b></p><br><ul><li>Provide Tier I and II customer service support as part of a service desk team across multiple networks, facilities, and locations (in-person telephonically or electronically submitted via ticket system); escalate incidents to higher Tier II or Tier III when required</li><li>Complete basic and advanced hardware and infrastructure work including cable management at both workstations and in-server rooms, workstation installations, checking UPS systems, replacing hardware components of laptops &amp; desktops, basic printer maintenance, etc.</li><li>Remediate problems with Windows desktops, laptops, printers, digital senders, video teleconference systems, VOIPs</li><li>Execute basic Active Directory tasks and manage NTFS permissions such as share folder access, etc.</li><li>Troubleshoot, diagnose, and resolve software issues with MS Office and Outlook, Adobe, Java, PKIs</li><li>Apply patches and updates to workstations both locally and remotely, and using PowerShell, RDP</li><li>Track all work in designated incident database tools &amp; systems (such as Remedy), ensure tickets are completed accurately and in a timely manner</li><li>Support In &amp; Out process users, including creating accounts, setting up workstations, mapping drives, and printers</li><li>Schedule and de-conflict Video Teleconferences</li><li>Conduct site surveys and installation of IT equipment</li><li>Participate in or lead special projects and day‐to‐day operations as needed or assigned by the site lead, including surging to alternate locations for customer requirements or to backfill personnel during R&amp;R or other absences</li></ul><p><b>Basic Qualifications:</b></p><br><ul><li>Bachelor's degree and 2+ years of prior relevant experience. Additional years of experience may be considered in lieu of a degree.</li><li>Active TS/SCI security clearance (in DISS).</li><li>Active 8570 IAT II (or higher) Baseline Certification, such as: Security+|ce.</li><li>Active Windows Computing Environment certification, such as: MS-900: Microsoft 365 Fundamentals, MD-102: Microsoft 365: Endpoint administrator Associate, etc., or the ability to obtain after hire.</li><li>Experience resolving Tier I and II hardware, software and application issues (printer, basic network (LAN), scheduling &amp; troubleshooting video tele-conferences (VTCs).</li><li>Working knowledge of Active Directory Users &amp; Computers, security groups/NTFS permissions, Cisco network/LAN principles, MS Windows 11, MS Office, desktop &amp; laptop hardware, etc.</li><li>Ability to work 12-hour shifts on-site, 7 days per week.</li><li>On-call availability 24x7, including weekends and holidays.</li><li>Current U.S. passport with at least 36 months validity and 5 blank pages.</li><li>Must successfully complete CRC processing and medical screening and be designated “fit for deployment” (including medical tests and BMI analysis).</li><li>Must obtain and maintain host nation work visa, including required local/regional medical testing.</li><li>Must be willing to live and work in the State of Kuwait or deploy to austere forward locations as required.</li><li>Must comply with all corporate policies, local site policies, host nation laws, customs, and courtesies.</li></ul><p><b>Preferred Qualifications: </b></p><br><ul><li>Active IT certification, such as: AZ-802:Windows Server hybrid administrator, CCNA, VCTA, NCDA.</li><li>Experience with US Intelligence networks and organizations in South-West Asia or on a Camp Arifjan service desk.</li></ul><p>AMSOPP1</p><br><p>If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares.</p><br><u><b>Original Posting:</b></u>September 1, 2026<p>For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.</p><br><br><br><br><br><br><br><br><b><u>Pay Range:</u></b>Pay Range $59,150.00 - $106,925.00<p><span>The Leidos pay range for this job level is a general guideline only&nbsp;and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.</span></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Leidos Defense Sector is hiring a <b>Field Service Technician</b> to support US Army Central G2.  The program provides IT repair, maintenance, operations, logistics, and engineering services to help ensure secure, reliable, and uninterrupted availability of Army Military Intelligence Enterprise IT Systems as well as network administration support for an organization comprised mostly of a Microsoft Enterprise software environment residing on multiple networks.</p><br><p>The Field Service Technician will be part of a dynamic team supporting customers throughout the ARCENT Area of Responsibility including both U.S. and coalition personnel.</p><br><p>This is a deployed position located at Camp Arifjan, Kuwait.</p><br><p>Duty hours are 12 hours per day, 7 days per week, and are subject to local labor laws. This position also requires 24/7 on call availability, including weekends and holidays.</p><br><p><b>Primary Responsibilities: </b></p><br><ul><li>Provide Tier I and II customer service support as part of a service desk team across multiple networks, facilities, and locations (in-person telephonically or electronically submitted via ticket system); escalate incidents to higher Tier II or Tier III when required</li><li>Complete basic and advanced hardware and infrastructure work including cable management at both workstations and in-server rooms, workstation installations, checking UPS systems, replacing hardware components of laptops &amp; desktops, basic printer maintenance, etc.</li><li>Remediate problems with Windows desktops, laptops, printers, digital senders, video teleconference systems, VOIPs</li><li>Execute basic Active Directory tasks and manage NTFS permissions such as share folder access, etc.</li><li>Troubleshoot, diagnose, and resolve software issues with MS Office and Outlook, Adobe, Java, PKIs</li><li>Apply patches and updates to workstations both locally and remotely, and using PowerShell, RDP</li><li>Track all work in designated incident database tools &amp; systems (such as Remedy), ensure tickets are completed accurately and in a timely manner</li><li>Support In &amp; Out process users, including creating accounts, setting up workstations, mapping drives, and printers</li><li>Schedule and de-conflict Video Teleconferences</li><li>Conduct site surveys and installation of IT equipment</li><li>Participate in or lead special projects and day‐to‐day operations as needed or assigned by the site lead, including surging to alternate locations for customer requirements or to backfill personnel during R&amp;R or other absences</li></ul><p><b>Basic Qualifications:</b></p><br><ul><li>Bachelor's degree and 2+ years of prior relevant experience. Additional years of experience may be considered in lieu of a degree.</li><li>Active TS/SCI security clearance (in DISS).</li><li>Active 8570 IAT II (or higher) Baseline Certification, such as: Security+|ce.</li><li>Active one Windows Computing Environment certification, such as: MS-900: Microsoft 365 Fundamentals, MD-102: Microsoft 365: Endpoint administrator Associate, etc.</li><li>Experience resolving Tier I and II hardware, software and application issues (printer, basic network (LAN), scheduling &amp; troubleshooting video tele-conferences (VTCs).</li><li>Working knowledge of Active Directory Users &amp; Computers, security groups/NTFS permissions, Cisco network/LAN principles, MS Windows 11, MS Office, desktop &amp; laptop hardware, etc.</li><li>Ability to work 12-hour shifts on-site, 7 days per week.</li><li>On-call availability 24x7, including weekends and holidays.</li><li>Current U.S. passport with at least 36 months validity and 5 blank pages.</li><li>Must successfully complete CRC processing and medical screening and be designated “fit for deployment” (including medical tests and BMI analysis).</li><li>Must obtain and maintain host nation work visa, including required local/regional medical testing.</li><li>Must be willing to live and work in the State of Kuwait or deploy to austere forward locations as required.</li><li>Must comply with all corporate policies, local site policies, host nation laws, customs, and courtesies.</li></ul><p><b>Preferred Qualifications: </b></p><br><ul><li>Active IT certification, such as: AZ-802:Windows Server hybrid administrator, CCNA, VCTA, NCDA.</li><li>Experience with US Intelligence networks and organizations in South-West Asia or on a Camp Arifjan service desk.</li></ul><p>AMSOPP1</p><br><p>If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares.</p><br><u><b>Original Posting:</b></u>August 10, 2026<p>For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.</p><br><br><br><br><br><br><br><br><b><u>Pay Range:</u></b>Pay Range $59,150.00 - $106,925.00<p><span>The Leidos pay range for this job level is a general guideline only&nbsp;and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.</span></p><br> </div>

<p>The Non-Destruction Inspection Technician (NDI) II inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis. Determine test method and prepare fluids and parts for nondestructive inspection. Interpret nondestructive inspection test results and provide information about defects to repair center. Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action. Establish radiation areas for radiographic operations. Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data. Perform nondestructive inspection on structures, components, and systems. Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrate testing, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment. Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors. Operate, maintain, and inspect nondestructive equipment. Perform operator maintenance and service inspections on shop equipment and tools. Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment. Perform silver recovery functions. Handle and dispose of hazardous waste and materials. Perform other qualified duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent required. U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Completion of a initial Non Destructive Inspection Level II training Course and current basic qualification.</li><li>Three (3) or more years experience as an aviation inspector and a minimum of one year experience on the assigned(MDS) airframe . (UH60, AH64, CH47 )</li><li>Shall be trained and qualified per NAS 410 or ASNT-CP-189 to the level assigned.</li><li>Must be in possession of a U.S. Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</li><li>Must be a US Citizen.</li><li>Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust. ** US Citizenship is required to obtain a T1/CAC NACI Clearance.</li><li>Able to clear CENTCOM Medical requirements for deployment.</li><li>Ability to obtain and maintain Kuwait Visa</li><li>Previous experience in the maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components (UH60, AH64, CH47).</li><li>Have the skills and knowledge to set up and standardize equipment, conduct tests, interpret and evaluate for acceptance or rejection, and document.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and Level I personnel in the technique/method in which they are certified.</li><li>Familiar with the codes, standards, and other contractual documents that control the method as utilized by the employer.</li><li>Capable of developing written instructions from approved general procedures. Such instructions shall require final approval by a Level III.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Conducts VTC conferences, operates VTC equipment such as VTC conferencing equipment, consoles, Digital Video Recorders (DVD), cameras, microphones, desktop and laptop computers supporting VTC events. Reports to the Site Manager as required. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver’s license in order to be qualified for this position. Responsibilities + Coordinates with customer to endure equipment is operational. + Sets-up and operates VTC equipment. + Establishes end to end secure and non-secure connectivity to support conferences. + Establishes proper cable connection and routing to various Audio/Video and communication links. + Adjusts sound and light levels for optimum performance of equipment and comfort of customers. + Troubleshoots VTC and connectivity problems with local and distant end technical control facilities and help-desks to restore communication and resolve poor reception/transmission issues. + Troubleshoots equipment; configures modems and data timing and transfer rates. + Resolves connectivity problems with technical personnel. + Performs weekly maintenance on all associated VTC equipment. + Operates, administers, and maintains the VTC Bridge. Required to manipulate the bridge to provide technical support for all VTC circuits attached. + Performs other duties and assignments as required. Qualifications + Qualifications + Security Clearance: + Requires an active Secret Clearance + Education/Certifications: One year related experience may be substituted for one year of education, if degree is required. + High School diploma or GED required. + Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience. + Requires a minimum of 5 years experience in Video Teleconferencing or Audio Video Productions. + Must be able to work rotating shift schedules which provide 24 hour day/7 day week coverage. + Experience with a customer service-oriented company. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Project Engineer I<br><br><br><p><b>Job Title </b></p><br><br><br><p><b><i>Project Engineer I</i></b></p><br><br><br><p><b>Division /Project </b></p><br><br><br><p>KBR’s Sustainable Technology Solutions (STS) group is looking for a Project Engineer I for <span>5-year</span> PMC contract for the supply of Programme Management services with Kuwait Oil Company. The contract serves to support KOC to achieve its objectives of reaching optimum capacity in its oilfields and enhancing its facilities by the most efficient and economical means available.</p><br><br><p>The contract aims to provide project management, co-ordination, planning, design, engineering, construction management, contracting, procurement, project controls and other services for construction of new oil field facilities, up-grading of existing facilities, and transfer of technology.</p><br><br><p><b>Primary Objectives</b></p><br><br><ul><li>Management of support services for supervising and directing engineering, procurement and management of construction contractors appointed by the Client.</li><li>Management of services for Oil &amp; Gas production activities including start-up and initial operations assistance as well as operational personnel and systems as required by the Client.</li><li>Manage and coordinate multidiscipline engineering activities to ensure projects such as FEED (front end engineering design) studies and preparation, ITB (invitation to bid) check estimate preparation, LSTK (lump sum turnkey) tender package preparation are executed in a safe, efficient, cost effective and timely manner.</li><li>Act as primary technical coordination interface with client to ensure that the client’s expectations are satisfied.</li><li>Ensure the project conforms to the client’s approved Basis of Design and all applicable regulatory and code requirements.</li></ul><br><p><b>Responsibilities</b></p><br><br><ul><li>Set-up, take over / hand over of projects</li><li>Setting clear objectives to the PMC’s design / engineering team</li><li>Management of PMC’s engineering teams during FEED, bidding and EPC phases</li><li>Compilation of the of scope of work documents, technical part of Invitation to Bid documents and the documentation of Project Milestone Reviews</li><li>Coordination of reviews and comments on engineering and other technical deliverables of 3rd party companies like P&amp;IDs, line lists, equipment datasheets, instrumentation index, cable routing, etc. within the agreed review time.</li><li>Coordination of PMC and client participation in team reviews like P&amp;ID reviews, HAZID, HAZOP, SIL, 3D models, constructability reviews and other technical project reviews</li><li>Ensures compliance with all applicable project standards and specifications</li><li>Support of field engineering, Monitoring of status of test packages, welding maps, spool tracking, and field progress</li><li>Coordinates with the commissioning team participation of the engineering team in punch walks, loop checks, PSSR reviews and assists in in preparing Mechanical Completion (MC) and Ready for Start-Up (RFSU) dossiers</li><li>Ensures proper compilation and updating of as-built documents, redlines, MTOs, loop folders and commissioning binders and handover documentation.</li><li>Ensures the delivery of the as built (End of Job) documentation to the client in time and good quality</li><li>Contribution to the development of overall project schedule.</li><li>Ensures work progress as per approved schedule in close cooperation with Project Controls Team</li><li>Set up and regularly maintaining a project dashboard in close cooperation with Project Controls Team</li><li>Monitors with support of the Project Controls Team cost aspects of the project within direct control to forecast final costs, trends and takes action to avoid cost overruns.</li><li>Evaluation of Earned Value / value of work for project completion with support of the Project Controls Team</li><li>Builds and maintains a healthy relationship with clients and acts as project focal point for the client</li><li>Proactively resolves scope and schedule issues with the 3rd party contractor as they arise.</li><li>Knows the contract between the FEED- or EPC-Contractor and between the Client and 3rd party contracts.</li><li>Knowing the PMC Contract between KBR and the Client</li><li>Ensures Change Order recording and participation from project team in technical parts of change order assessment</li><li>Regularly provides input to project reports to internal Project Management and the Clients</li><li>Assessment and feedback of third-party contractor’s project reports</li><li>Defines and communicates team’s priorities such as achievement of milestones and other key project objectives.</li><li>Listens to the team, discusses the issues, resolves problems and directs activities to remove roadblocks and achieve objectives.</li><li>Effective communication with the design and engineering teams (inside PMC and third parties) and other project stakeholders like operations, maintenance etc.</li><li>Regularly chairs and records project team meetings within the PMC organisation and with the client and with the 3rd party contractors or consultants.</li><li>Responsibility for preparation and status tracking of all projects related correspondence and transmittals / project documents.</li><li>Perform together with relevant discipline engineers technical bid evaluations (TBE) and award recommendations</li><li>Participates or delegates participation of discipline engineers in Factory and Site Acceptance Tests</li></ul><br><p><b>Qualifications including Required Education, Experience, &amp; Skills</b></p><br><br><ul><li><span>B. Sc. Eng from an accredited college or university.</span></li></ul><br><ul><li><span>Minimum 15 years post-graduation total experience</span></li></ul><br><ul><li><span>10 years minimum experience post qualification in Oil &amp; Gas, refinery, or petrochemical industry, with exposure to heavy oil projects</span></li></ul><br><ul><li><span>5 years of minimum experience in related designation / specialty.</span></li></ul><br><ul><li><span>Must have proven track record of managing and leading teams for large sized projects in the Oil &amp; Gas industry</span></li></ul><br><ul><li><span>Must have demonstrated ability of effective functioning in a multi-cultural environment, preferably in the Middle East.</span></li></ul><br><b>Essential skills/experience</b><ul><li>Analysis and problems solving</li><li>Creativity/innovation</li><li>Communications, written and oral.</li><li>Formal presentation skills</li><li>Ability to influence and persuade.</li></ul><br><p><b>Decarbonization – Energy Transition – Sustainability </b></p><br><br><p><b>Belong. Connect. Grow. with KBR! </b></p><br><br><br><br><br> </div>

<p><h4>Job Description</h4> <p>The Non-Destruction Inspection Technician (NDI) II inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.<br> Interpret nondestructive inspection test results and provide information about defects to repair center.<br> Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.<br> Establish radiation areas for radiographic operations.<br> Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.<br> Perform nondestructive inspection on structures, components, and systems.<br> Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant testing, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.<br> Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.<br> Operate, maintain, and inspect nondestructive equipment.<br> Perform operator maintenance and service inspections on shop equipment and tools.<br> Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.<br> Perform silver recovery functions.<br> Handle and dispose of hazardous waste and materials.<br> Perform other qualified duties as assigned.</p> <h4>Minimum Requirements</h4> <p>High school diploma or equivalent required.<br> U.S. military technical school or specialized training course is desired; certification of education level is required.<br> Completion of an initial Non Destructive Inspection Level II training course and current basic qualification.<br> Three (3) or more years’ experience as an aviation inspector and a minimum of one year experience on the assigned (MDS) airframe (UH60, AH64, CH47).<br> Shall be trained and qualified per NAS 410 or ASNT-CP-189 to the level assigned.<br> Must be in possession of a U.S. Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.<br> Must be a US citizen.<br> Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust. US citizenship is required to obtain a T1/CAC NACI clearance.<br> Able to clear CENTCOM medical requirements for deployment.<br> Ability to obtain and maintain Kuwait visa.</p> <h4>Knowledge & Skills</h4> <ul> <li>Previous experience in the maintenance, modification, and repair of tactical aircraft systems of the type being serviced and their associated components (UH60, AH64, CH47).</li> <li>Have the skills and knowledge to set up and standardize equipment, conduct tests, interpret and evaluate for acceptance or rejection, and document.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and Level I personnel in the technique/method in which they are certified.</li> <li>Familiar with the codes, standards, and other contractual documents that control the method as utilized by the employer.</li> <li>Capable of developing written instructions from approved general procedures. Such instructions shall require final approval by a Level III.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic, and pneumatic systems or other technology as applicable to fabrication, repair, operation, and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and shears, etc. is required.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical Requirements / Working Environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<p>About the Role: We are seeking an experienced and results-driven Project Manager to lead marine construction projects involving dredging, GRP pipeline installation, and intake tower structures. The ideal candidate will be responsible for overall project planning, execution, and delivery, ensuring compliance with client requirements, international standards, and safety regulations. Key Responsibilities: • Project Planning and Execution: Oversee the full project lifecycle including tendering, planning, execution, monitoring, and handover • Manage dredging operations including capital and maintenance dredging, reclamation, and material disposal • Supervise installation of GRP pipelines including trenching, pipe laying, jointing, lamination, and backfilling in marine environments • Lead construction of intake towers including piling, structural concrete, mechanical and electrical installations, and marine outfall structures • Develop and manage project budgets, cost estimates, and financial forecasts; ensure cost control • Prepare, maintain, and update detailed project schedules using Primavera P6 or MS Project • Coordinate with design engineers, surveyors, marine superintendents, and subcontractors for seamless project execution • Manage client relations and ensure client satisfaction; attend progress meetings and present updates • Ensure all project activities comply with local and international codes, standards, and regulations (ISO, BS, ASTM, IMO, SOLAS, MARPOL) • Manage subcontractors including dredging companies, pipeline installation specialists, and civil contractors • Procure equipment, materials, and subcontractor services as required • Conduct risk assessments and implement mitigation strategies • Enforce strict HSE compliance across all project activities • Prepare and submit regular progress reports, cost reports, and risk assessments to senior management • Lead, mentor, and motivate the project team including engineers, supervisors, and site staff • Negotiate contracts, change orders, and variations with clients and subcontractors • Manage project documentation including method statements, inspection test plans (ITPs), and as-built drawings • Oversee project close-out including final inspections, documentation, and handover to client • Ensure successful completion of pre-commissioning and commissioning activities including hydrotesting, pressure testing, and flushing</p><p>Qualifications & Experience: • Bachelor's degree in Civil Engineering, Marine Engineering, or related field (Master's preferred) • Minimum 10-15 years of experience in project management of marine construction projects • Proven experience in dredging, GRP pipeline installation, and intake tower/outfall structure construction • Strong knowledge of international standards and guidelines for marine structures, pipelines, and dredging (PIANC, IMO, ISO, BS, AWWA M45, ISO 14692) • Experience in FIDIC, NEC, or other standard contract forms and commercial management • Proficiency in Primavera P6 and MS Project for scheduling and project controls • Valid safety certifications (NEBOSH, IOSH, OSHA) • Offshore survival certificates (BOSIET/HUET) if required • Fluency in English; Arabic is a plus • PMP or equivalent project management certification is preferred Required Skills: • Strong leadership, negotiation, and decision-making abilities • Excellent communication, presentation, and stakeholder management skills • Commercial awareness for budgeting and contract management • Technical knowledge of dredging, pipeline installation, and marine concrete works • Ability to manage multiple aspects of projects including design, procurement, construction, and commissioning • Problem-solving and risk management skills • Ability to work under pressure and meet deadlines • Team collaboration with engineering, operations, and HSE teams</p>