Female Nurse Jobs in Kuwait

<p>Promotes and enforces the implementation of all QHSSE requirements and facilitates implementation and improvement of Barrier Management System (BMS) onboard the rig. Provides guidance and expertise to all personnel on Health, Safety, &amp; Environmental (HSE) standards and assists with related goals and programs. Ensures appropriate dissemination of HSE policies, procedures, and guidance documentation. Maintains a strong presence at the worksite, especially in high-risk, high-activity areas (i.e., deck, drill floor). Approximately 75% of the working day should be spent at the worksite, If this is not being met due to other administrative work loads then it must be raised first to STP then to Rig Manager and the office based QHSSE Focal Point assigned to the rig if not achieved in 1 hitch. Promotes Safety Programs (i.e., ADES 8 keys to incident-free) on the rig, ensuring each employee is aware of their standards and how to apply them. Promotes ADES Awards (i.e., TOFS award) to embed the concept into the rig culture. Assists in the management of the Stop, Hazard, Initiate, Engage, Learn and Demonstrate (SHIELD) program and encourage active participation by undertaking safety performance conversations by all persons on board. Ensures Stop Work Authority (SWA) obligation is understood by all persons on board and exercised promptly. This is integral to the Company s safety culture. The RSO is expected to lead by example and should coach all crew members by helping them intervene and stop work when opportunities arise. Assists the Senior Tool Pusher by monitoring/verifying compliance with control of work systems such as JSA, SOP s, PTW, Isolation, Confined Space, Rescue Planning etc. Complies with, monitor, and effectively contribute to the continuous improvement of BMS, HSE related policies and procedures, and relevant authority regulatory requirements. Identifies and addresses in collaboration with the site operations management by identifying and addressing HSE or noncompliance concerns. Assists with internal/external audit completion, close-out, and tracking. Consults with personnel including safety leaders and department heads on all matters concerning safety. Engages with crews during safety meetings and supervisors meetings; presents topics/findings. Monitors the selection of suitable personal protective equipment (PPE) including performing checks on sizing and suitability. Maintains awareness of substances hazardous to health and the correct storage, use, handling, and PPE requirements. Carries out onboard training and/or books crew training to ensure full compliance with the crew training matrix. Assist third-party trainers as necessary. Assists, monitors, and verifies compliance with the short-service employee (SSE) process to ensure effective implementation and that on-the-job training is being provided to develop the SSEs. Participate and assist the Rig Manager with rig-based incident reporting and investigations to determine root cause(s). Ensure investigation findings are shared between all crews on board. Assist with and deliver rig orientation and induction (as requested). Liaise with customer representatives and regulatory bodies as necessary. Perform emergency duties as per the rig station bill. Moderates the rig self-verification process.</p><p><strong>Desired Candidate Profile</strong></p><p>Education &amp; Experience:</p><ul><li>Bachelor's degree</li><li>Preferably a minimum of 2 years in an RSO role.</li><li>Previous experience within the drilling industry in an HSE role/position.</li></ul><p>Skills/Competencies Required:</p><ul><li>Completion of all required ADES mandatory training requirements.</li><li>Working knowledge of Microsoft Office products (Excel, Word, PowerPoint, etc.).</li><li>Excellent written and verbal communication skills.</li><li>Detail-oriented.</li><li>Analytical thinking and solution Decision-making.</li><li>Performance Management, planning, problem-solving, organizational, and time management skills.</li><li>Inspire Trust.</li></ul><p>Certifications:</p><ul><li>As per ADES Training Matrix.</li><li>Formal investigation training certification preferred (i.e., Taproot , Topset or equivalent).</li><li>Recognized HSE training qualification preferred (i.e., NEBOSH, IOSH, OSHA or equivalent).</li><li>Additional QHSSE audit certifications</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Job Title: </span><span>English Foundation Program Instructor</span></p><br> <p><span>Classification:</span>Faculty<br><span>Reports To:</span> Director, English and Math Foundation Program</p><br> <p><span>Location</span>: Kuwait City, Kuwait</p><br> <p><span>About The American International University</span></p><br> <p>American International University (AIU) is a private institution in Kuwait, founded in 2019, offering undergraduate programs based on the American model of higher education. AIU provides degrees in Engineering, Architecture and Design, and Business Administration, with English as the language of instruction. The University is committed to fostering intellectual, cultural, and personal growth, preparing graduates for leadership roles in a global society.</p><br> <p>For more information, visit:&nbsp;www.aiu.edu.kw</p><br> <p>The English Foundation Program serves as the academic bridge to undergraduate study by preparing students for success through intensive instruction in academic English, quantitative reasoning, and university learning skills.</p><br> <p><span>Position Summary</span></p><br> <p>The English Foundation Program at American International University (AIU) prepares students for success in English-medium degree programs through an intensive curriculum grounded in evidence-based pedagogy, active learning, and continuous improvement.</p><br> <p>The program emphasizes academic communication, critical thinking, learner autonomy, and the academic skills necessary for success in undergraduate study. Instruction is intentionally designed, evidence-informed, and aligned with clearly articulated Student Learning Outcomes.</p><br> <p>We seek faculty who approach teaching as a scholarly, evidence-informed practice and who are committed to advancing student learning through intentional course design, meaningful assessment, and continuous improvement. Successful candidates understand that effective instruction is outcomes-driven, informed by evidence of student learning, and strengthened through scholarly teaching, collaboration, and continuous professional growth.</p><br> <p><span>Minimum Qualifications</span></p><br> <ul> <li>Master's degree in TESOL, Applied Linguistics, TEFL, or a closely related discipline</li> <li>Minimum of three years of English language teaching experience</li> <li>Experience preparing students for academic study in English or English-medium education</li> <li>Native or near-native English proficiency</li> </ul> <p><span>Preferred Qualifications</span></p><br> <ul> <li>University Foundation Programs, Intensive English Programs (IEPs), English for Academic Purposes (EAP), or other English-medium higher education contexts</li> <li>Evidence-based, student-centered pedagogy and active learning</li> <li>Student Learning Outcomes (SLOs), constructive alignment, and outcomes-based curriculum and assessment</li> <li>Formative assessment and data-informed instructional decision-making</li> <li>Educational technology and the pedagogically appropriate integration of artificial intelligence (AI)</li> <li>Accreditation, quality assurance, curriculum review, and continuous improvement</li> </ul> <p><span>Responsibilities</span></p><br> <p>Faculty members are expected to contribute to teaching, curriculum development, assessment, and institutional service. Responsibilities include:</p><br> <ul> <li>Teach up to 20 contact hours per week.</li> <li>Design and deliver student-centered instruction using evidence-based pedagogical practices aligned with Student Learning Outcomes.</li> <li>Develop, administer, and evaluate assessments; use formative assessment and student learning data to inform instruction and continuous improvement.</li> <li>Integrate educational technologies, including the appropriate use of artificial intelligence (AI), to enhance teaching and learning while maintaining academic integrity.</li> <li>Maintain accurate attendance, grading, assessment, and student records, and hold regular office hours to support student success.</li> <li>Participate in curriculum development, placement testing, program assessment, and accreditation activities.</li> <li>Collaborate with colleagues to promote consistency in curriculum, assessment, and academic standards.</li> <li>Participate in professional development, committee service, and other academic responsibilities as assigned.</li> </ul> <p><span>How to Apply</span></p><br> <p>Interested candidates should visit the Job Opportunities section on our website and submit a resume and cover letter via:&nbsp;https://aiu.edu.kw/careers/jobs</p><br> <p>Applications will be reviewed on a rolling basis until the position is filled. The successful candidate is expected to commence employment on August 30, 2026.</p><br> <p><span>AIU is an equal opportunity employer committed to academic excellence, professional integrity, and the principled governance of Kuwaiti higher education.</span></p><br> </div>

<p><h4>Job summary</h4> <p>Agility is looking for a lead technology architect to serve as the senior-most technical authority for our messaging, collaboration, and identity estate across multiple organizational environments.</p> <p>This is a hands-on leadership role — you will personally design, build, secure, and operate our platforms while setting technical standards and leading a small team of 1–2 administrators. There is no higher technical authority within the function; you will own critical decisions end-to-end.</p> <p>The portfolio spans Microsoft Entra ID, Active Directory, Exchange Online/Hybrid, Microsoft Teams and SBC voice, SharePoint/OneDrive, Microsoft Defender, Intune endpoint fleet, certificates, DNS, enterprise AI platforms (Claude + Microsoft Copilot), and a large SSO/application integration portfolio.</p> <h4>Your responsibilities</h4> <strong>Identity & access management</strong><br> <li>Administer Microsoft Entra ID and on-premises AD across all environments</li> <li>Design and maintain Conditional Access, PIM, RBAC, MFA, and SSO (OAuth, OIDC, SAML)</li> <li>Own hybrid identity via Entra Connect</li> <strong>Messaging & email</strong><br> <li>Administer Exchange Online and Exchange Server (hybrid), including DAG, mail flow, and transport rules</li> <li>Own email security (gateway, DMARC, DKIM, SPF) and manage mailbox migrations</li> <strong>Collaboration & voice</strong><br> <li>Administer Microsoft Teams policies, governance, and SBC-based enterprise voice (dial plans, call queues, PSTN)</li> <li>Manage SharePoint Online and OneDrive, including external sharing and Known Folder Move</li> <strong>Security & threat protection</strong><br> <li>Operate Microsoft Defender for Office 365 and Endpoint (EDR, ASR, security baselines)</li> <li>Lead incident response and maintain hardening controls aligned to CIS benchmarks</li> <strong>Endpoint management (Intune)</strong><br> <li>Manage a mid-to-large multi-country fleet (Windows, macOS, Android, iOS)</li> <li>Own Autopilot, compliance/configuration policies, update rings, app packaging, and PowerShell remediation scripts</li> <strong>Certificates, DNS & web publishing</strong><br> <li>Manage full SSL/TLS certificate lifecycle and DNS/CDN/WAF/DDoS platforms</li> <li>Own domain governance, registrations, and the web publishing approval workflow</li> <strong>Artificial intelligence</strong><br> <li>Administer enterprise AI platforms including Claude integrations and Microsoft Copilot</li> <li>Design AI workflows and agents, govern AI access, model organizational data, and manage AI licensing</li> <strong>Architecture, governance & leadership</strong><br> <li>Act as technical design authority; maintain standards, runbooks, and documentation</li> <li>Lead, mentor, and delegate to a small admin team</li> <li>Serve as final escalation point; on-call for critical incidents</li> <h4>Your qualifications</h4> <strong>Education</strong><br> <li>Bachelor's degree in Computer Science, IT, Engineering, or related field (Master's preferred)</li> <li>Exceptional hands-on experience may be considered in lieu of formal qualifications</li> <strong>Experience</strong><br> <li>12–15 years in enterprise IT infrastructure with deep Microsoft stack expertise</li> <li>5–7 years in a senior architect or technical lead role owning M365 environments end-to-end</li> <li>Proven hands-on experience with Exchange hybrid, Entra ID/AD, Intune at scale, and Microsoft Defender</li> <li>Practical experience with enterprise AI platforms (Claude, Microsoft Copilot), including workflow design and data modeling</li> <strong>Certifications (required/strongly preferred — candidates should hold several)</strong><br> <li>MS-102 — Microsoft 365 Enterprise Administrator Expert</li> <li>SC-300 — Identity and Access Administrator Associate</li> <li>SC-200 — Security Operations Analyst Associate</li> <li>MD-102 — Endpoint Administrator Associate</li> <li>MS-700 — Teams Administrator Associate</li> <li>AZ-104 — Azure Administrator Associate</li> <li>MS-203 — Messaging Administrator Associate (or equivalent)</li> <strong>Other requirements</strong><br> <li>Based in Kuwait or willing to relocate; on-site at Kuwait head office</li> <li>Eligible to hold Global Administrator / privileged access (enhanced background screening may apply)</li> <li>Fluent professional English; Arabic is an advantage</li> <li>On-call availability for critical incidents</li> <h4>Your proficiencies</h4> <li>Excellent problem-solving skills and attention to detail</li> <li>Effective communication and collaboration skills</li> <li>Ability to work independently and handle multiple tasks</li> <li>Analytical and troubleshooting skills</li> <li>Stakeholder management</li> <li>Technical leadership & collaborative influence</li> <li>Operational excellence & adaptive delivery</li> <li>Strategic problem-solving & architecture design</li> <li>Fluent professional English; Arabic is an advantage</li></p><p></p>

<p><h4>Job summary</h4> <p>Agility is looking for a lead technology architect to serve as the senior-most technical authority for our messaging, collaboration, and identity estate across multiple organizational environments.</p> <p>This is a hands-on leadership role — you will personally design, build, secure, and operate our platforms while setting technical standards and leading a small team of 1–2 administrators. There is no higher technical authority within the function; you will own critical decisions end-to-end.</p> <p>The portfolio spans Microsoft Entra ID, Active Directory, Exchange Online/Hybrid, Microsoft Teams and SBC voice, SharePoint/OneDrive, Microsoft Defender, Intune endpoint fleet, certificates, DNS, enterprise AI platforms (Claude + Microsoft Copilot), and a large SSO/application integration portfolio.</p> <h4>Your responsibilities</h4> <strong>Identity & access management</strong><br> <ul> <li>Administer Microsoft Entra ID and on-premises AD across all environments</li> <li>Design and maintain Conditional Access, PIM, RBAC, MFA, and SSO (OAuth, OIDC, SAML)</li> <li>Own hybrid identity via Entra Connect</li> </ul> <strong>Messaging & email</strong><br> <ul> <li>Administer Exchange Online and Exchange Server (hybrid), including DAG, mail flow, and transport rules</li> <li>Own email security (gateway, DMARC, DKIM, SPF) and manage mailbox migrations</li> </ul> <strong>Collaboration & voice</strong><br> <ul> <li>Administer Microsoft Teams policies, governance, and SBC-based enterprise voice (dial plans, call queues, PSTN)</li> <li>Manage SharePoint Online and OneDrive, including external sharing and Known Folder Move</li> </ul> <strong>Security & threat protection</strong><br> <ul> <li>Operate Microsoft Defender for Office 365 and Endpoint (EDR, ASR, security baselines)</li> <li>Lead incident response and maintain hardening controls aligned to CIS benchmarks</li> </ul> <strong>Endpoint management (Intune)</strong><br> <ul> <li>Manage a mid-to-large multi-country fleet (Windows, macOS, Android, iOS)</li> <li>Own Autopilot, compliance/configuration policies, update rings, app packaging, and PowerShell remediation scripts</li> </ul> <strong>Certificates, DNS & web publishing</strong><br> <ul> <li>Manage full SSL/TLS certificate lifecycle and DNS/CDN/WAF/DDoS platforms</li> <li>Own domain governance, registrations, and the web publishing approval workflow</li> </ul> <strong>Artificial intelligence</strong><br> <ul> <li>Administer enterprise AI platforms including Claude integrations and Microsoft Copilot</li> <li>Design AI workflows and agents, govern AI access, model organizational data, and manage AI licensing</li> </ul> <strong>Architecture, governance & leadership</strong><br> <ul> <li>Act as technical design authority; maintain standards, runbooks, and documentation</li> <li>Lead, mentor, and delegate to a small admin team</li> <li>Serve as final escalation point; on-call for critical incidents</li> </ul> <h4>Your qualifications</h4> <strong>Education</strong><br> <p>Bachelor's degree in Computer Science, IT, Engineering, or related field (Master's preferred). Exceptional hands-on experience may be considered in lieu of formal qualifications.</p> <strong>Experience</strong><br> <ul> <li>12–15 years in enterprise IT infrastructure with deep Microsoft stack expertise</li> <li>5–7 years in a senior architect or technical lead role owning M365 environments end-to-end</li> <li>Proven hands-on experience with Exchange hybrid, Entra ID/AD, Intune at scale, and Microsoft Defender</li> <li>Practical experience with enterprise AI platforms (Claude, Microsoft Copilot), including workflow design and data modeling</li> </ul> <strong>Certifications (required/strongly preferred — candidates should hold several)</strong><br> <ul> <li>MS-102 — Microsoft 365 Enterprise Administrator Expert</li> <li>SC-300 — Identity and Access Administrator Associate</li> <li>SC-200 — Security Operations Analyst Associate</li> <li>MD-102 — Endpoint Administrator Associate</li> <li>MS-700 — Teams Administrator Associate</li> <li>AZ-104 — Azure Administrator Associate</li> <li>MS-203 — Messaging Administrator Associate (or equivalent)</li> </ul> <strong>Other requirements</strong><br> <ul> <li>Based in Kuwait or willing to relocate; on-site at Kuwait Head Office</li> <li>Eligible to hold Global Administrator / privileged access (enhanced background screening may apply)</li> <li>Fluent professional English; Arabic is an advantage</li> <li>On-call availability for critical incidents</li> </ul> <h4>Your proficiencies</h4> <ul> <li>Excellent problem-solving skills and attention to detail</li> <li>Effective communication and collaboration skills</li> <li>Ability to work independently and handle multiple tasks</li> <li>Analytical and troubleshooting skills</li> <li>Stakeholder management</li> <li>Technical leadership & collaborative influence</li> <li>Operational excellence & adaptive delivery</li> <li>Strategic problem-solving & architecture design</li> <li>Fluent professional English; Arabic is an advantage</li> </ul></p><p></p>

<p><h4>Environmental health & safety specialist</h4> <p>Are you looking for an interesting and inspiring opportunity?<br> Would you like to be part of a successful company? Join our HSE team!</p> <p><strong>Partner with the best</strong></p> <p>As an HSE lead, you will be responsible for:</p> <ul> <li>Engaging with business unit leadership team to drive a sense of shared accountability and continuous improvement in HSE performance and culture, and integrate HSE in business decisions and management systems.</li> <li>Driving a compelling sense of urgency across the different product lines to identify HSE hazards, develop and implement effective safety critical barriers, and validate them.</li> <li>Driving the same compelling sense of urgency across the different product lines to identify applicable HSE regulatory requirements and take actions to ensure compliance.</li> <li>Engaging and cooperating with the broader Baker Hughes HSE function to deploy HSE practices and standards and accelerate performance improvements.</li> <li>Taking an active and effective stance in representing the company in external industry or community events.</li> </ul> <p><strong>Fuel your passion</strong></p> <p>To be successful in this role you will:</p> <ul> <li>Have a bachelor's degree from an accredited university in HSE or engineering.</li> <li>Have a minimum of 5 years of professional experience in an HSE role, preferably in oil and gas, energy industries, or manufacturing.</li> <li>Be knowledgeable about Kuwait occupational safety & health regulations and standards, and experienced in working with relevant regulatory agencies.</li> <li>Have skills in interfacing effectively with all levels of the organization, as well as outside Baker Hughes, including contractors, vendors, and customers.</li> <li>Being approved as HSE by KOC is a plus.</li> </ul> <p><strong>Work in a way that works for you</strong></p> <p>We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns:</p> <p>When assignments are complete, in general, you won't be required to visit the office; however, you can operate from home and perform basic tasks like completing previous assignment reports, mobilization-related aspects, etc., before you take on your next projects. The company shall ensure a work-life balance for the individual.</p> <p><strong>Working with us</strong></p> <p>Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged, and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent, and develop leaders at all levels to bring out the best in each other.</p> <p><strong>Working for you</strong></p> <p>Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:</p> <ul> <li>Contemporary work-life balance policies and well-being activities.</li> <li>Comprehensive private medical care options.</li> <li>The safety net of life insurance and programs.</li> <li>Tailored financial programs.</li> <li>Additional elected or voluntary benefits.</li> </ul> <p>The Baker Hughes internal title for this role is: Environmental Health & Safety Specialist - Health and Safety</p> <p><strong>About us:</strong><br> We are an energy technology company that provides solutions to energy and industrial customers worldwide. Built on a century of experience and conducting business in over 120 countries, our innovative technologies and services are taking energy forward – making it safer, cleaner, and more efficient for people</p><p></p>

<p><h4>Program summary</h4> <p>KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services facilitate essential aircraft arrivals and departures services for United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers engineering support, NTV leasing, LAMS, power production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</p> <h4>Job summary</h4> <p>The Transient Aircraft Services (TAS) Technician is responsible for the execution of aircraft ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs aircraft arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</p> <p>This position ensures all aircraft servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for maintaining operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</p> <h4>Roles and responsibilities</h4> <ul> <li>Maintain a ZERO Harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE at all times.</li> <li>Perform aircraft marshaling, parking, and positioning in accordance with applicable Technical Orders and airfield procedures.</li> <li>Execute aircraft arrival and departure services, including chocking, grounding, and ensuring safe positioning on the flight line.</li> <li>Conduct aircraft servicing operations, including general ground handling tasks required to support aircraft turn-around and mission readiness.</li> <li>Assist in aircraft launch and recovery operations in coordination with Supervisors and Airfield Management.</li> <li>Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</li> <li>Maintain strict accountability of tools and equipment; ensure compliance with tool control programs at all times.</li> <li>Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</li> <li>Follow all applicable Technical Orders, safety directives, and standard operating procedures during all aircraft servicing operations.</li> <li>Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</li> <li>Identify and report safety hazards, equipment malfunctions, and operational issues to leadership immediately.</li> <li>Support documentation requirements, including aircraft servicing records, shift logs, and inspection checklists.</li> <li>Assist in maintaining cleanliness and organization of the flight line and work areas.</li> <li>Support training and qualification requirements to maintain mission readiness and compliance with certification standards.</li> <li>Perform duties in austere conditions, including extreme weather, while maintaining safety and operational discipline.</li> <li>Perform additional duties and tasks as assigned by the Supervisor or Site Manager.</li> </ul> <h4>Basic qualifications</h4> <ul> <li>Must be a U.S. citizen</li> <li>Ability to obtain and maintain a SECRET clearance</li> <li>Ability to maintain operational continuity across rotations and work within Government-led governance rhythms</li> <li>Minimum 3–5 years of experience in aviation operations, aircraft maintenance, or Transient Aircraft Services</li> <li>Hands-on experience working on a flight line or in aircraft ground operations</li> <li>Basic knowledge of: <ul> <li>Aircraft marshaling and ground handling procedures</li> <li>Flight line safety requirements</li> <li>Use of ground support equipment</li> </ul> </li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Prior experience supporting U.S. Air Force TAS operations</li> <li>FAA Airframe & Powerplant (A&P) certification or equivalent military experience</li> <li>Familiarity with FOD programs, tool control, and flight line safety compliance</li> <li>Experience coordinating with MOC, Airfield Management, and aircraft maintenance teams</li> </ul> <h4>KBR benefits</h4> <p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance, AD</p><p></p>

<p><h4>Program summary</h4> <p>KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services facilitate essential aircraft arrivals and departures services for United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers engineering support, NTV leasing, LAMS, power production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</p> <h4>Job summary</h4> <p>The Transient Aircraft Services (TAS) Technician is responsible for the execution of aircraft ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs aircraft arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</p> <p>This position ensures all aircraft servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for maintaining operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</p> <h4>Roles and responsibilities</h4> <ul> <li>Maintain a ZERO Harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE at all times.</li> <li>Perform aircraft marshaling, parking, and positioning in accordance with applicable Technical Orders and airfield procedures.</li> <li>Execute aircraft arrival and departure services, including chocking, grounding, and ensuring safe positioning on the flight line.</li> <li>Conduct aircraft servicing operations, including general ground handling tasks required to support aircraft turn-around and mission readiness.</li> <li>Assist in aircraft launch and recovery operations in coordination with Supervisors and Airfield Management.</li> <li>Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</li> <li>Maintain strict accountability of tools and equipment; ensure compliance with tool control programs at all times.</li> <li>Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</li> <li>Follow all applicable Technical Orders, safety directives, and standard operating procedures during all aircraft servicing operations.</li> <li>Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</li> <li>Identify and report safety hazards, equipment malfunctions, and operational issues to leadership immediately.</li> <li>Support documentation requirements, including aircraft servicing records, shift logs, and inspection checklists.</li> <li>Assist in maintaining cleanliness and organization of the flight line and work areas.</li> <li>Support training and qualification requirements to maintain mission readiness and compliance with certification standards.</li> <li>Perform duties in austere conditions, including extreme weather, while maintaining safety and operational discipline.</li> <li>Perform additional duties and tasks as assigned by the Supervisor or Site Manager.</li> </ul> <h4>Basic qualifications</h4> <ul> <li>Must be a U.S. citizen</li> <li>Ability to obtain and maintain a SECRET clearance</li> <li>Ability to maintain operational continuity across rotations and work within Government-led governance rhythms</li> <li>Minimum 3–5 years of experience in aviation operations, aircraft maintenance, or Transient Aircraft Services</li> <li>Hands-on experience working on a flight line or in aircraft ground operations</li> <li>Basic knowledge of: <ul> <li>Aircraft marshaling and ground handling procedures</li> <li>Flight line safety requirements</li> <li>Use of ground support equipment</li> </ul> </li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Prior experience supporting U.S. Air Force TAS operations</li> <li>FAA Airframe & Powerplant (A&P) certification or equivalent military experience</li> <li>Familiarity with FOD programs, tool control, and flight line safety compliance</li> <li>Experience coordinating with MOC, Airfield Management, and aircraft maintenance teams</li> </ul> <h4>KBR benefits</h4> <p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life</p><p></p>

<p><h4>Program summary</h4> <p>KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services facilitate essential aircraft arrivals and departures services for United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers Engineering Support, NTV Leasing, LAMS, Power Production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</p> <h4>Job summary</h4> <p>The Transient Aircraft Services (TAS) Technician is responsible for the execution of aircraft ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs aircraft arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</p> <p>This position ensures all aircraft servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for maintaining operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</p> <h4>Roles and responsibilities</h4> <ul> <li>Maintain a ZERO Harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE at all times.</li> <li>Perform aircraft marshaling, parking, and positioning in accordance with applicable Technical Orders and airfield procedures.</li> <li>Execute aircraft arrival and departure services, including chocking, grounding, and ensuring safe positioning on the flight line.</li> <li>Conduct aircraft servicing operations, including general ground handling tasks required to support aircraft turn-around and mission readiness.</li> <li>Assist in aircraft launch and recovery operations in coordination with Supervisors and Airfield Management.</li> <li>Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</li> <li>Maintain strict accountability of tools and equipment; ensure compliance with tool control programs at all times.</li> <li>Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</li> <li>Follow all applicable Technical Orders, safety directives, and standard operating procedures during all aircraft servicing operations.</li> <li>Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</li> <li>Identify and report safety hazards, equipment malfunctions, and operational issues to leadership immediately.</li> <li>Support documentation requirements, including aircraft servicing records, shift logs, and inspection checklists.</li> <li>Assist in maintaining cleanliness and organization of the flight line and work areas.</li> <li>Support training and qualification requirements to maintain mission readiness and compliance with certification standards.</li> <li>Perform duties in austere conditions, including extreme weather, while maintaining safety and operational discipline.</li> <li>Perform additional duties and tasks as assigned by the Supervisor or Site Manager.</li> </ul> <h4>Basic qualifications</h4> <ul> <li>Must be a U.S. citizen</li> <li>Ability to obtain and maintain a SECRET clearance</li> <li>Ability to maintain operational continuity across rotations and work within Government-led governance rhythms</li> <li>Minimum 3–5 years of experience in aviation operations, aircraft maintenance, or Transient Aircraft Services</li> <li>Hands-on experience working on a flight line or in aircraft ground operations</li> <li>Basic knowledge of: <ul> <li>Aircraft marshaling and ground handling procedures</li> <li>Flight line safety requirements</li> <li>Use of ground support equipment</li> </ul> </li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Prior experience supporting U.S. Air Force TAS operations</li> <li>FAA Airframe & Powerplant (A&P) certification or equivalent military experience</li> <li>Familiarity with FOD programs, tool control, and flight line safety compliance</li> <li>Experience coordinating with MOC, Airfield Management, and aircraft maintenance teams</li> </ul> <h4>KBR benefits</h4> <p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance, AD</p><p></p>

<p><h4>Program summary</h4> <p>KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services facilitate essential aircraft arrivals and departures services for United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers Engineering Support, NTV Leasing, LAMS, Power Production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</p> <h4>Job summary</h4> <p>The Transient Aircraft Services (TAS) Technician is responsible for the execution of aircraft ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs aircraft arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</p> <p>This position ensures all aircraft servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for maintaining operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</p> <h4>Roles and responsibilities</h4> <ul> <li>Maintain a ZERO Harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE at all times.</li> <li>Perform aircraft marshaling, parking, and positioning in accordance with applicable Technical Orders and airfield procedures.</li> <li>Execute aircraft arrival and departure services, including chocking, grounding, and ensuring safe positioning on the flight line.</li> <li>Conduct aircraft servicing operations, including general ground handling tasks required to support aircraft turn-around and mission readiness.</li> <li>Assist in aircraft launch and recovery operations in coordination with Supervisors and Airfield Management.</li> <li>Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</li> <li>Maintain strict accountability of tools and equipment; ensure compliance with tool control programs at all times.</li> <li>Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</li> <li>Follow all applicable Technical Orders, safety directives, and standard operating procedures during all aircraft servicing operations.</li> <li>Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</li> <li>Identify and report safety hazards, equipment malfunctions, and operational issues to leadership immediately.</li> <li>Support documentation requirements, including aircraft servicing records, shift logs, and inspection checklists.</li> <li>Assist in maintaining cleanliness and organization of the flight line and work areas.</li> <li>Support training and qualification requirements to maintain mission readiness and compliance with certification standards.</li> <li>Perform duties in austere conditions, including extreme weather, while maintaining safety and operational discipline.</li> <li>Perform additional duties and tasks as assigned by the Supervisor or Site Manager.</li> </ul> <h4>Basic qualifications</h4> <ul> <li>Must be a U.S. citizen</li> <li>Ability to obtain and maintain a SECRET clearance</li> <li>Ability to maintain operational continuity across rotations and work within Government-led governance rhythms</li> <li>Minimum 3–5 years of experience in aviation operations, aircraft maintenance, or Transient Aircraft Services</li> <li>Hands-on experience working on a flight line or in aircraft ground operations</li> <li>Basic knowledge of: <ul> <li>Aircraft marshaling and ground handling procedures</li> <li>Flight line safety requirements</li> <li>Use of ground support equipment</li> </ul> </li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Prior experience supporting U.S. Air Force TAS operations</li> <li>FAA Airframe & Powerplant (A&P) certification or equivalent military experience</li> <li>Familiarity with FOD programs, tool control, and flight line safety compliance</li> <li>Experience coordinating with MOC, Airfield Management, and aircraft maintenance teams</li> </ul> <h4>KBR benefits</h4> <p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance, AD</p><p></p>

<p><h4>Program summary</h4> <p>KBR, through the AFCAP V program, assists the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services facilitate essential aircraft arrivals and departures services for United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers engineering support, NTV leasing, LAMS, power production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</p> <h4>Job summary</h4> <p>The Transient Aircraft Services (TAS) Technician is responsible for the execution of aircraft ground handling and servicing operations at an assigned installation. Reporting directly to the supervisor, the TAS Technician performs aircraft arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</p> <p>This position ensures all aircraft servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for maintaining operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</p> <h4>Roles and responsibilities</h4> <ul> <li>Maintain a ZERO Harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE at all times.</li> <li>Perform aircraft marshaling, parking, and positioning in accordance with applicable Technical Orders and airfield procedures.</li> <li>Execute aircraft arrival and departure services, including chocking, grounding, and ensuring safe positioning on the flight line.</li> <li>Conduct aircraft servicing operations, including general ground handling tasks required to support aircraft turn-around and mission readiness.</li> <li>Assist in aircraft launch and recovery operations in coordination with supervisors and airfield management.</li> <li>Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</li> <li>Maintain strict accountability of tools and equipment; ensure compliance with tool control programs at all times.</li> <li>Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</li> <li>Follow all applicable Technical Orders, safety directives, and standard operating procedures during all aircraft servicing operations.</li> <li>Communicate effectively with supervisors and team members to ensure safe and efficient execution of tasks.</li> <li>Identify and report safety hazards, equipment malfunctions, and operational issues to leadership immediately.</li> <li>Support documentation requirements, including aircraft servicing records, shift logs, and inspection checklists.</li> <li>Assist in maintaining cleanliness and organization of the flight line and work areas.</li> <li>Support training and qualification requirements to maintain mission readiness and compliance with certification standards.</li> <li>Perform duties in austere conditions, including extreme weather, while maintaining safety and operational discipline.</li> <li>Perform additional duties and tasks as assigned by the supervisor or site manager.</li> </ul> <h4>Basic qualifications</h4> <ul> <li>Must be a U.S. citizen</li> <li>Ability to obtain and maintain a SECRET clearance</li> <li>Ability to maintain operational continuity across rotations and work within government-led governance rhythms</li> <li>Minimum 3–5 years of experience in aviation operations, aircraft maintenance, or Transient Aircraft Services</li> <li>Hands-on experience working on a flight line or in aircraft ground operations</li> <li>Basic knowledge of: <ul> <li>Aircraft marshaling and ground handling procedures</li> <li>Flight line safety requirements</li> <li>Use of ground support equipment</li> </ul> </li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Prior experience supporting U.S. Air Force TAS operations</li> <li>FAA Airframe & Powerplant (A&P) certification or equivalent military experience</li> <li>Familiarity with FOD programs, tool control, and flight line safety compliance</li> <li>Experience coordinating with MOC, Airfield Management, and aircraft maintenance teams</li> </ul> <h4>KBR benefits</h4> <p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance, AD</p><p></p>

<p><h4>Company description<\/h4>\n<p>Join us at Accor, where life pulses with passion! As a pioneer in the art of responsible hospitality, the Accor Group gathers more than 45 brands, 5,600 hotels, 10,000 restaurants, and lifestyle destinations in 110 countries. While each brand has its own personality, where you will be able to truly find yourself, they all share a common ambition: to keep innovating and challenging the status quo.<\/p>\n<p>By joining us, you will become a Heartist\u00ae, because hospitality is, first and foremost, a work of heart.<\/p>\n<p>You will join a caring environment and a team where you can be all you are. You will be in a supportive place to grow, to fulfil yourself, to discover other professions and to pursue career opportunities, in your hotel or in other hospitality environments, in your country or anywhere in the world!<\/p>\n<p>You will enjoy exclusive benefits, specific to the sector and beyond, as well as strong recognition for your daily commitment.<\/p>\n<p>Everything you will do with us, regardless of your profession, will offer a deep sense of meaning, to create lasting, memorable and impactful experiences for your customers, for your colleagues and for the planet.<\/p>\n<p>Hospitality is a work of heart, join us and become a Heartist\u00ae.<\/p>\n\n<h4>Job description<\/h4>\n\n<h4>Key roles & responsibilities<\/h4>\n<li>Pick-up and delivery: Responsible for the punctual and professional collection and delivery of all guest laundry and dry-cleaning items.<\/li>\n<li>Marking and recording: Count and verify all items collected against the laundry list provided by the guest. Ensure guest names, room numbers, and item counts are accurately recorded to avoid discrepancies.<\/li>\n<li>Item inspection: Thoroughly check garments for any existing damage, stains, or items left in pockets (e.g., jewelry, cash) and report these to a supervisor immediately before processing.<\/li>\n<li>Adherence to brand standards: Ensure all procedures and quality standards are strictly followed during the pick-up and delivery process.<\/li>\n<li>Guest request fulfillment: Confirm that specific instructions\u2014such as folding trousers, light starch, or folding shirts\u2014are perfectly adhered to.<\/li>\n<li>Administrative support: Accurately record guest and staff laundry charges and assist with tracking staff uniforms in a timely manner.<\/li>\n<li>Operational assistance: Carry out general valet services as needed, including the delivery of fresh linen and assisting with inventories.<\/li>\n\n<h4>Qualifications<\/h4>\n\n<h4>Qualifications & attributes<\/h4>\n<li>Experience: Typically requires at least 2 years of experience in a similar capacity within a luxury hotel environment.<\/li>\n<li>Communication skills: Must have a good command of English (reading, writing, and oral proficiency) to handle guest queries professionally.<\/li>\n<li>Professionalism: Must be well-presented and maintain high standards of grooming and hygiene at all times.<\/li>\n<li>Key traits: High attention to detail, strong interpersonal skills, and a \"guest-focused\" mindset are essential for this high-touch role.<\/li>\n\n<h4>Additional information<\/h4>\n<p><strong>Why work for Accor<\/strong><\/p>\n<li>Develop your talent through Accor\u2019s learning programs.<\/li>\n<li>Opportunity to grow within your property and across the world!<\/li>\n<li>Ability to contribute to the community and make a difference through our Corporate Social Responsibility and Environmental, Social, and Governance (ESG) activities.<\/li>\n<p><strong>Our commitment to diversity & inclusion:<\/strong><\/p>\n<p>We are an inclusive company and our ambition is to attract, recruit and promote diverse talent.<\/p><\/p><p><\/p>

<p><h4>Program summary</h4> <p>KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services facilitate essential aircraft arrivals and departures services for United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers engineering support, NTV leasing, LAMS, power production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</p> <h4>Job summary</h4> <p>The Transient Aircraft Services (TAS) Technician is responsible for the execution of aircraft ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs aircraft arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</p> <p>This position ensures all aircraft servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for maintaining operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</p> <h4>Roles and responsibilities</h4> <ul> <li>Maintain a ZERO Harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE at all times.</li> <li>Perform aircraft marshaling, parking, and positioning in accordance with applicable Technical Orders and airfield procedures.</li> <li>Execute aircraft arrival and departure services, including chocking, grounding, and ensuring safe positioning on the flight line.</li> <li>Conduct aircraft servicing operations, including general ground handling tasks required to support aircraft turn-around and mission readiness.</li> <li>Assist in aircraft launch and recovery operations in coordination with Supervisors and Airfield Management.</li> <li>Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</li> <li>Maintain strict accountability of tools and equipment; ensure compliance with tool control programs at all times.</li> <li>Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</li> <li>Follow all applicable Technical Orders, safety directives, and standard operating procedures during all aircraft servicing operations.</li> <li>Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</li> <li>Identify and report safety hazards, equipment malfunctions, and operational issues to leadership immediately.</li> <li>Support documentation requirements, including aircraft servicing records, shift logs, and inspection checklists.</li> <li>Assist in maintaining cleanliness and organization of the flight line and work areas.</li> <li>Support training and qualification requirements to maintain mission readiness and compliance with certification standards.</li> <li>Perform duties in austere conditions, including extreme weather, while maintaining safety and operational discipline.</li> <li>Perform additional duties and tasks as assigned by the Supervisor or Site Manager.</li> </ul> <h4>Basic qualifications</h4> <ul> <li>Must be a U.S. citizen</li> <li>Ability to obtain and maintain a SECRET clearance</li> <li>Ability to maintain operational continuity across rotations and work within Government-led governance rhythms</li> <li>Minimum 3–5 years of experience in aviation operations, aircraft maintenance, or Transient Aircraft Services</li> <li>Hands-on experience working on a flight line or in aircraft ground operations</li> <li>Basic knowledge of: <ul> <li>Aircraft marshaling and ground handling procedures</li> <li>Flight line safety requirements</li> <li>Use of ground support equipment</li> </ul> </li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Prior experience supporting U.S. Air Force TAS operations</li> <li>FAA Airframe & Powerplant (A&P) certification or equivalent military experience</li> <li>Familiarity with FOD programs, tool control, and flight line safety compliance</li> <li>Experience coordinating with MOC, Airfield Management, and aircraft maintenance teams</li> </ul> <h4>KBR benefits</h4> <p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life</p><p></p>

<p><h4>Program summary</h4> <p>KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services facilitate essential aircraft arrivals and departures services for United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers engineering support, NTV leasing, LAMS, power production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</p> <h4>Job summary</h4> <p>The Transient Aircraft Services (TAS) Technician is responsible for the execution of aircraft ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs aircraft arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</p> <p>This position ensures all aircraft servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for maintaining operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</p> <h4>Roles and responsibilities</h4> <ul> <li>Maintain a ZERO Harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE at all times.</li> <li>Perform aircraft marshaling, parking, and positioning in accordance with applicable Technical Orders and airfield procedures.</li> <li>Execute aircraft arrival and departure services, including chocking, grounding, and ensuring safe positioning on the flight line.</li> <li>Conduct aircraft servicing operations, including general ground handling tasks required to support aircraft turn-around and mission readiness.</li> <li>Assist in aircraft launch and recovery operations in coordination with Supervisors and Airfield Management.</li> <li>Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</li> <li>Maintain strict accountability of tools and equipment; ensure compliance with tool control programs at all times.</li> <li>Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</li> <li>Follow all applicable Technical Orders, safety directives, and standard operating procedures during all aircraft servicing operations.</li> <li>Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</li> <li>Identify and report safety hazards, equipment malfunctions, and operational issues to leadership immediately.</li> <li>Support documentation requirements, including aircraft servicing records, shift logs, and inspection checklists.</li> <li>Assist in maintaining cleanliness and organization of the flight line and work areas.</li> <li>Support training and qualification requirements to maintain mission readiness and compliance with certification standards.</li> <li>Perform duties in austere conditions, including extreme weather, while maintaining safety and operational discipline.</li> <li>Perform additional duties and tasks as assigned by the Supervisor or Site Manager.</li> </ul> <h4>Basic qualifications</h4> <ul> <li>Must be a U.S. citizen</li> <li>Ability to obtain and maintain a SECRET clearance</li> <li>Ability to maintain operational continuity across rotations and work within Government-led governance rhythms</li> <li>Minimum 3–5 years of experience in aviation operations, aircraft maintenance, or Transient Aircraft Services</li> <li>Hands-on experience working on a flight line or in aircraft ground operations</li> <li>Basic knowledge of: <ul> <li>Aircraft marshaling and ground handling procedures</li> <li>Flight line safety requirements</li> <li>Use of ground support equipment</li> </ul> </li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Prior experience supporting U.S. Air Force TAS operations</li> <li>FAA Airframe & Powerplant (A&P) certification or equivalent military experience</li> <li>Familiarity with FOD programs, tool control, and flight line safety compliance</li> <li>Experience coordinating with MOC, Airfield Management, and aircraft maintenance teams</li> </ul> <h4>KBR benefits</h4> <p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance, AD</p><p></p>

<p><h4>Program summary</h4> <p>KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services facilitate essential aircraft arrivals and departures services for United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers Engineering Support, NTV Leasing, LAMS, Power Production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</p> <h4>Job summary</h4> <p>The Transient Aircraft Services (TAS) Technician is responsible for the execution of aircraft ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs aircraft arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</p> <p>This position ensures all aircraft servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for maintaining operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</p> <h4>Roles and responsibilities</h4> <ul> <li>Maintain a ZERO Harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE at all times.</li> <li>Perform aircraft marshaling, parking, and positioning in accordance with applicable Technical Orders and airfield procedures.</li> <li>Execute aircraft arrival and departure services, including chocking, grounding, and ensuring safe positioning on the flight line.</li> <li>Conduct aircraft servicing operations, including general ground handling tasks required to support aircraft turn-around and mission readiness.</li> <li>Assist in aircraft launch and recovery operations in coordination with Supervisors and Airfield Management.</li> <li>Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</li> <li>Maintain strict accountability of tools and equipment; ensure compliance with tool control programs at all times.</li> <li>Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</li> <li>Follow all applicable Technical Orders, safety directives, and standard operating procedures during all aircraft servicing operations.</li> <li>Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</li> <li>Identify and report safety hazards, equipment malfunctions, and operational issues to leadership immediately.</li> <li>Support documentation requirements, including aircraft servicing records, shift logs, and inspection checklists.</li> <li>Assist in maintaining cleanliness and organization of the flight line and work areas.</li> <li>Support training and qualification requirements to maintain mission readiness and compliance with certification standards.</li> <li>Perform duties in austere conditions, including extreme weather, while maintaining safety and operational discipline.</li> <li>Perform additional duties and tasks as assigned by the Supervisor or Site Manager.</li> </ul> <h4>Basic qualifications</h4> <ul> <li>Must be a U.S. citizen</li> <li>Ability to obtain and maintain a SECRET clearance</li> <li>Ability to maintain operational continuity across rotations and work within Government-led governance rhythms</li> <li>Minimum 3–5 years of experience in aviation operations, aircraft maintenance, or Transient Aircraft Services</li> <li>Hands-on experience working on a flight line or in aircraft ground operations</li> <li>Basic knowledge of: <ul> <li>Aircraft marshaling and ground handling procedures</li> <li>Flight line safety requirements</li> <li>Use of ground support equipment</li> </ul> </li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Prior experience supporting U.S. Air Force TAS operations</li> <li>FAA Airframe & Powerplant (A&P) certification or equivalent military experience</li> <li>Familiarity with FOD programs, tool control, and flight line safety compliance</li> <li>Experience coordinating with MOC, Airfield Management, and aircraft maintenance teams</li> </ul> <h4>KBR benefits</h4> <p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance,</p><p></p>

<p><h4>About us</h4> <p>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.</p> <h4>Primary objective</h4> <p>Manages, provides advice on and administers all activities concerned with contracts for works and services associated with oil and gas facilities projects carried out under various contract forms and modes of reimbursement.</p> <h4>Specific accountabilities</h4> <ul> <li>Responsible for pre–award activities including bid invitation preparation, processing queries from bidders, preparation of bid evaluation programmes, evaluation of bids, negotiation, contract preparation and award formalities.</li> <li>Responsible for post–award activities including conducting kick–off meetings, coordinating all contract submittals and correspondence, preparation and processing of variation orders, claims and close out.</li> <li>Manages the drafting of Invitation to Tender packages for contracts for large O&G facilities projects. Reviews and, if necessary, proposes comments on and proposes alternative text/clauses to client contract conditions.</li> <li>Reviews issues with legal, risk management, tax, and accounting personnel as a condition precedent to submitting to management for approval.</li> <li>Functions as a part of a negotiating team consisting of project management staff, to establish the terms and conditions of a contract.</li> <li>Monitors and ensures the business provisions of assigned contracts are administered to ensure compliance with contractual terms and conditions. Keeps the Projects Contracts Manager advised as to the scope, financial, and risk features of applicable contracts.</li> <li>Ensures documentation to negotiate change orders are properly produced and maintained.</li> <li>Prepares letters to clients requesting approvals and interpretations necessary to comply with the provisions of the contract.</li> <li>Ensures project/facility acceptance documents are prepared and are followed through and that acceptances are signed by the client.</li> <li>Furnishes business and financial information requested by the client concerning the project, as delegated by the Project Manager.</li> <li>Identifies contractual problems and takes appropriate action to ensure a satisfactory resolution. Follows up on those problems which demand management attention, to ensure timely response to the client.</li> <li>Management of contract quality standards.</li> </ul> <h4>Qualifications and experience</h4> <ul> <li>Full time bachelor's degree in engineering or degree in science, commerce or law from an accredited university.</li> <li>IACCM professional certification in 'Contract and Commercial Management Advanced Practitioner' or equivalent.</li> <li>Minimum 12 years of total experience post graduate studies.</li> <li>Minimum 5 years experience as a lead contracts administrator or equivalent title.</li> <li>Extensive knowledge of contractual terms & conditions and commercial contract law.</li> <li>Experienced in developing contract strategy & contract development, post award, contract administration and claims functions.</li> </ul> <h4>Moving forward together</h4> <p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p> <p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p> <p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p></p><p></p>

<p>• Create and prepare artwork and design files for print production. • Develop creative designs based on customer requirements and specifications. • Ensure all artwork meets printing and production standards. • Modify and revise designs as required. • Coordinate with the production team to ensure accurate and timely delivery of print materials. • Maintain organized design files and project documentation.</p><p>• Proficiency in Adobe Illustrator is mandatory. • Experience in the printing industry or large-format printing environment is preferred but not required. • Strong attention to detail and understanding of print-ready artwork preparation. • Good communication skills in English; Arabic language skills are an advantage. • Ability to work in a fast-paced environment and manage multiple projects. • Candidates who are immediately available or can join at short notice will be given preference. • Must provide a digital portfolio showcasing previous design work.</p>

<p>• Create and prepare artwork and design files for print production. • Develop creative designs based on customer requirements and specifications. • Ensure all artwork meets printing and production standards. • Modify and revise designs as required. • Coordinate with the production team to ensure accurate and timely delivery of print materials. • Maintain organized design files and project documentation.</p><p>• Proficiency in Adobe Illustrator is mandatory. • Experience in the printing industry or large-format printing environment is preferred but not required. • Strong attention to detail and understanding of print-ready artwork preparation. • Good communication skills in English; Arabic language skills are an advantage. • Ability to work in a fast-paced environment and manage multiple projects. • Candidates who are immediately available or can join at short notice will be given preference. • Must provide a digital portfolio showcasing previous design work.</p>

<p>Promotes and enforces the implementation of all QHSSE requirements and facilitates implementation and improvement of Barrier Management System (BMS) onboard the rig. Provides guidance and expertise to all personnel on Health, Safety, &amp; Environmental (HSE) standards and assists with related goals and programs.</p><p>Ensures appropriate dissemination of HSE policies, procedures, and guidance documentation. Maintains a strong presence at the worksite, especially in high-risk, high-activity areas (i.e., deck, drill floor). Approximately 75% of the working day should be spent at the worksite, If this is not being met due to other administrative work loads then it must be raised first to STP then to Rig Manager and the office based QHSSE Focal Point assigned to the rig if not achieved in 1 hitch. Promotes Safety Programs (i.e., ADES 8 keys to incident-free) on the rig, ensuring each employee is aware of their standards and how to apply them. Promotes ADES Awards (i.e., TOFS award) to embed the concept into the rig culture. Assists in the management of the Stop, Hazard, Initiate, Engage, Learn and Demonstrate (SHIELD) program and encourage active participation by undertaking safety performance conversations by all persons on board. Ensures Stop Work Authority (SWA) obligation is understood by all persons on board and exercised promptly. This is integral to the Company s safety culture. The RSO is expected to lead by example and should coach all crew members by helping them intervene and stop work when opportunities arise. Assists the Senior Tool Pusher by monitoring/verifying compliance with control of work systems such as JSA, SOP s, PTW, Isolation, Confined Space, Rescue Planning etc. Complies with, monitor, and effectively contribute to the continuous improvement of BMS, HSE related policies and procedures, and relevant authority regulatory requirements. Identifies and addresses in collaboration with the site operations management by identifying and addressing HSE or noncompliance concerns. Assists with internal/external audit completion, close-out, and tracking. Consults with personnel including safety leaders and department heads on all matters concerning safety. Engages with crews during safety meetings and supervisors meetings; presents topics/findings. Monitors the selection of suitable personal protective equipment (PPE) including performing checks on sizing and suitability. Maintains awareness of substances hazardous to health and the correct storage, use, handling, and PPE requirements. Carries out onboard training and/or books crew training to ensure full compliance with the crew training matrix. Assist third-party trainers as necessary. Assists, monitors, and verifies compliance with the short-service employee (SSE) process to ensure effective implementation and that on-the-job training is being provided to develop the SSEs. Participate and assist the Senior Tool Pusher with rig-based incident reporting and investigations to determine root cause(s). Ensure investigation findings are shared between all crews on board. Assist with and deliver rig orientation and induction (as requested). Liaise with customer representatives and regulatory bodies as necessary. Perform emergency duties as per the rig station bill. Moderates the rig self-verification process.</p><p><strong>Desired Candidate Profile</strong></p><p>Education &amp; Experience:</p><ul><li>Bachelor's degree</li><li>Preferably a minimum of 2 years in an RSO role.</li><li>Previous experience within the drilling industry in an HSE role/position.</li></ul><p>Skills/Competencies Required:</p><ul><li>Completion of all required ADES mandatory training requirements.</li><li>Working knowledge of Microsoft Office products (Excel, Word, PowerPoint, etc.).</li><li>Excellent written and verbal communication skills.</li><li>Detail-oriented.</li><li>Analytical thinking and solution Decision-making.</li><li>Performance Management, planning, problem-solving, organizational, and time management skills.</li><li>Inspire Trust.</li></ul><p>Certifications:</p><ul><li>As per ADES Training Matrix.</li><li>Formal investigation training certification preferred (i.e., Taproot , Topset or equivalent).</li><li>Recognized HSE training qualification preferred (i.e., NEBOSH, IOSH, OSHA or equivalent).</li><li>Additional QHSSE audit certifications'</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job description</p><p><br></p><p>Position: Dental CAD/CAM Technician</p><p><br></p><p>Location: Overseas</p><p><br></p><p><br></p><p>Requirements:</p><p><br></p><p>Minimum 5 years of experience in Dental CAD/CAM</p><p>Diploma in Dental Technology / Dental Mechanics (2 years)</p><p>Valid Dental Technician Professional License</p><p>Expertise in Exocad and/or 3Shape</p><p>Experience in Crown &amp; Bridge Design</p><p>Implant Prosthesis</p><p>Digital Dental Workflow</p><p>STL &amp; CAM Workflow</p><p>Strong communication skills</p><p>Interested candidates should send:</p><p><br></p><p>Updated CV</p><p>Diploma Certificate</p><p>Professional License</p><p>Experience Certificates</p><p>Passport Copy</p><p>Only shortlisted candidates will be contacted.</p><p><br></p><p>Role: Healthcare &amp; Life Sciences - Other</p><p>Industry Type: Recruitment / Staffing</p><p>Department: Healthcare &amp; Life Sciences</p><p>Employment Type: Full Time, Temporary/Contractual</p><p>Role Category: Healthcare &amp; Life Sciences - Other</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum 5 years of experience in Dental CAD/CAM</li><li>Diploma in Dental Technology / Dental Mechanics (2 years)</li><li>Valid Dental Technician Professional License</li><li>Expertise in Exocad and/or 3Shape</li><li>Experience in Crown &amp; Bridge Design</li><li>Implant Prosthesis</li><li>Digital Dental Workflow</li><li>STL &amp; CAM Workflow</li><li>Strong communication skills</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Production Specialist is responsible for overseeing and executing all aspects of media and content production, including video, photography, and digital materials. This role ensures that all visual and multimedia content reflects the college s brand identity and supports internal and external communication goals. The Production Specialist collaborates closely with the marketing and design teams to produce engaging and high-quality media for events, social media, and institutional campaigns.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s degree in Media Production, Film, Communication, or a related field.</li><li>3-5 years of experience in media production, videography, or content creation.</li><li>Proficiency in video editing software (Adobe Premiere Pro, After Effects, Final Cut Pro, etc.).</li><li>Knowledge of photography techniques, lighting, and sound production.</li><li>Strong organizational and time management skills with attention to detail.</li><li>Ability to work collaboratively in a fast-paced, deadline-driven environment.</li><li>Creativity and technical expertise in visual storytelling.</li><li>Fluent in English (Arabic is an advantage).</li></ul><p></p></section>