Electromechanical Engineer Jobs - Capital Governorate (Kuwait) Kuwait

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible to supervise all the activities at Substation as per Clients requirement, in concern to complying project task with quality and under required safety measures. To coordinate with various Sub-contractors like civil, Fire-fighting &amp; HAVC works and to resolve arising site issues. Shall have good communication skill and knowledge to review all construction drawings, interfacing layouts and all other necessary drawings required for execution of works. Familiar to review BOMs, Quality plans and to maintain documentation like daily reports, preparation of work schedule, manpower record, materials requisition etc.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>BE / Btech in Electrical Enigneering with minimum 7 years of experience. Shall have experience in installation of indoor Gas insulated Switchgear substation Projects with exposure of 132KV to 400 KV voltage level.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Develop technical specifications, scopes of work, and procurement documents for IAQ and environmental systems. Review engineering drawings, technical datasheets, product catalogs, test reports, and manufacturer documentation. Evaluate supplier technical proposals and verify compliance with project specifications and applicable standards. Prepare technical bid evaluation reports and provide recommendations for supplier selection. Ensure procured equipment complies with applicable environmental, health, and safety regulations. Manage procurement activities from technical evaluation through delivery, installation, and warranty support. Maintain technical documentation, procurement records, equipment specifications, and asset information.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in environmental engineering, Environmental Science, Chemical Engineering, Industrial Engineering, or a related field. Minimum experience in technical procurement, engineering, HVAC, indoor air quality, environmental systems, or related technical fields. Experience with public-sector procurement, EPC projects, or facility management is an advantage.</p><p></p></section>

<p><span >Preferred Qualifications and Experience : JOB PURPOSE Job Description: In this role, you'll work collaboratively with software engineering to deploy and operate various systems. Help automate and streamline our operations and processes. Build and maintain tools for deployment, monitoring, and operations. And troubleshoot and resolve issues in our dev, test and production environments. Responsibilities: Communicate efficiently with Developers to resolve Issues on Production, UAT and Dev environments. Help maintain code quality, organization, and automatization. Maintaining, and streamlining our automated build and release pipeline from code. Facilitating and championing the quick resolution of problems found during the daily build and deployment efforts. Creating and maintaining documentation of the build/release process. Investigating tools and processes and integrating them so that they can improve the reliability, stability, and efficiency with which we release our services. Requirements: Strong background in Linux/Unix Administration. Knowledge of Shell Scripting / Ansible. Strong Communication skill via chat and Phone, Must be a team player. Expert skills with Bitbucket/GIT administration, designing GIT based workflow (GITflow/ branching). Should have extensive experience with the CI/CD Tools like Jenkins, Pipelines. Strong Knowledge in Ansistrano. Experience with automation/configuration management using Ansible. Ability to use a wide variety of open source technologies and cloud services (experience with AWS is preferred). Extensive knowledge in Python/Powershell/Bash scripting. Knowledge of best practices and IT operations in an always-up, always-available service. Knowledge of JMeter and other performance measuring tool is preferred. Proactive and self-motivated willing to improve on existing processes to allow for faster iterations. Strong track record of learning new tools and technologies. RHCE Certification is a must. AWS Certification on DevOps will be a plus.</span></p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Prepare and develop FEED packages, including electrical design calculations, datasheets, and technical specifications.</p></li><li><p>Review and verify project drawings, datasheets, and technical documents for accuracy, completeness, and compliance with project requirements and standards.</p></li><li><p>Perform electrical design calculations, equipment selection, and material specification in line with project requirements.</p></li><li><p>Collaborate with multi-disciplinary teams, including piping, civil, electrical, and instrumentation engineers, to ensure integrated project delivery.</p></li><li><p>Ensure designs meet client requirements, project timelines, and international standards.</p></li><li><p>Provide technical support during project execution, including design modifications, clarifications, and troubleshooting.</p></li><li><p>Ensure all engineering deliverables adhere to HSE standards, company policies, and applicable codes.</p></li><li><p>Support procurement activities by providing technical input for electrical equipment and material selection and BOM.</p></li><li><p>Assist in developing project schedules, cost estimates, and technical reports.</p></li><li><p>Proven ability to review project drawings, technical documents, audits, and project meetings.</p></li></ul><p>Demonstrate excellent analytical, communication, and coordination skills to ensure effective collaboration and project delivery.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in electrical engineering or a related field.</p></li><li><p>Proficiency in engineering software/tools (e.g., AutoCAD, ETAB or similar).</p></li><li><p>Strong understanding of codes, and standards (ASME, API, ISO, etc.).</p></li><li><p>Minimum 12 years of experience in Electrical design within the Oil &amp; Gas sector.</p></li><li><p>Hands-on experience in FEED package preparation.</p></li><li><p>Strong capability in reviewing and interpreting project drawings and technical documentation.</p></li><li><p>Familiarity with project management tools and documentation control systems.</p></li><li><p>Strong problem-solving ability and attention to detail.</p></li><li><p>Kuwait based/Transferable Visa</p></li></ul><p></p></section>

<ol><li><p>Execute electrical installation, testing, commissioning, and maintenance activities.</p></li><li><p>Perform troubleshooting and fault diagnosis of electrical systems and equipment.</p></li><li><p>Read and interpret electrical drawings, schematics, and Single Line Diagrams (SLDs).</p></li><li><p>Install, inspect, and maintain substations, switchgear, transformers, control panels, and protection systems.</p></li><li><p>Ensure compliance with project specifications, quality standards, and safety regulations.</p></li><li><p>Coordinate with project teams to complete work efficiently and on schedule.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ol><li><p><strong>ITI / Diploma / B.E. (Electrical)</strong></p></li><li><p><strong>Minimum 5 years' relevant experience</strong></p></li><li><p><strong>Experience in GIS, DBB, Switchgear, Transformers & Protection Systems</strong></p></li><li><p><strong>Testing, Commissioning & Maintenance</strong></p></li><li><p><strong>Electrical Drawing & SLD Interpretation</strong></p></li><li><p><strong>GCC Experience Preferred</strong></p></li></ol>

<p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p><p>Data Center Network Engineers support the Enterprise-class infrastructure of the RCC-SWA. RCC-SWA engineers provide optimization, administration, and technical documentation of all enterprise infrastructure systems. Additionally, engineers resolve and appropriately complete assigned cases and change requests while acting as an escalation point for troubleshooting issues. The core infrastructure technology duties include an in-depth understanding of Cisco s Nexus switching, ASR routing, UCS compute platforms, and lifecycle management planning. The MCF is managed by the RCC-SWA and provides enterprise Information Technology (IT) services to approved Army customers. Program: OMDAC-SWACA</p><p>This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program!</p><p>You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position.</p><p>Responsibilities</p><ul><li>Produce enterprise-level support for a dynamic and large-scale networking infrastructure from the perspective of service origination in the data center, as well as service delivery in the global transport architecture.</li><li>Provide expert level knowledge of data center infrastructure hardware such as Nexus 9000 series switches, Fabric Extenders, UCS chassis and UCS Fabric Interconnects.</li><li>Along with assuming the expert role regarding vPC, FCoE, Catalyst VSS, MPLS L3VPN, eBGP/iBGP, OSPF/EIGRP, DMVPN, FlexPod design philosophy, among other tunneling and data center-centric technologies.</li><li>While also offering a basic understanding of VMware s vSphere infrastructure and the virtual networking components for troubleshooting purposes.</li><li>Installation, configuration, maintenance, and troubleshooting of the data center environment are primary roles in this position.</li><li>Provides change control and engages Cisco TAC for issues, modifications and best practices when needed.</li><li>Monitors availability and reliability of the data center network and supported infrastructure utilizing DX NetOps Spectrum, SolarWinds Orion and Cisco DNA Center.</li><li>Executes engineering best practices in network builds, integration, testing, and documentation while adhering to security fundamentals provided by DISA s Security Technical Implementation Guides (STIGs).</li><li>Perform regular system maintenance in support of IAVA vulnerabilities and CCRI compliance.</li><li>Ensure that all managed technologies are compliant with current DISA Security Technical Implementation Guides (STIGs).</li><li>Assist with identifying and investigating malicious network activity.</li><li>Create and track network issues/requests using the ServiceNow ticketing system.</li><li>Create, update and maintain detailed network diagrams.</li><li>Performs other duties and assignments as required.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Requires an active Secret Clearance</li><li>One-year related experience can be substituted for one year of education if the degree is required.</li><li>Bachelor s Degree or equivalent experience preferably in Computer Science or MIS, IS, Engineering or related field.</li><li>This position requires candidates to adhere to DoD 8570.01M. All candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. Baseline certifications cannot also be used as a Computing Environment (CE) certification.</li><li>Python and/or Ansible scripting</li><li>Cisco DevNet</li><li>Working knowledge of Linux</li><li>At least 10 years of practical experience working with network and systems technologies.</li><li>A full understanding of cloud computing and the different pillars that support cloud computing (IaaS, PaaS, SaaS).</li><li>Experience working with Cisco Nexus and cloud technologies.</li><li>Expert level of understanding and experience with data network systems, routing, switching, Virtual Routing and Forwarding (VRF), MPLS, and layer 2 protocols.</li><li>Experience with VPN technologies.</li><li>A solid background with TCP/IP and must be able to troubleshoot all supported network protocols.</li><li>Experience with creating and maintaining custom python scripts.</li><li>Experience working with and maintaining Cisco DNA Center.</li><li>Ability to verify that all systems under the direct control of RCC-SWA are properly configured in accordance with the NETCOM, RCC-SWA and DISA STIG configuration policies.</li><li>Ability to manage asset documentation for accreditation and authorization.</li><li>Ability to assess networking requirements and provide solutions.</li><li>Ability to make accurate and independent decisions under pressure.</li><li>Ability to successfully execute many complex tasks simultaneously.</li><li>Expert ability to troubleshoot infrastructure equipment.</li><li>Excellent organizational, interpersonal, written, and verbal communication skills</li><li>Ability to perform comfortably in a fast-paced, deadline-oriented work environment.</li><li>Ability to successfully execute many complex tasks simultaneously across departmental boundaries.</li><li>Experience with a customer service-oriented company</li></ul>

<p><br></p> <p> <b>The opportunity</b> </p> <p> </p> <p>Join a team that specializes in providing remote and on-site services for protection systems in transmission and distribution substations, ensuring solutions that are timely, cost-effective, and aligned with customer expectations. Our work adheres to industry-standard processes, safety protocols, and best practices delivering reliability and excellence every step of the way.</p> <p> </p> <p> <b>How you ll make an impact </b> </p> <ul> <li> <p> <span>Driving service sales and business development activities across assigned countries and market segments (e.g., Utilities, Power Generation, Oil &amp; Gas, EPCs, Industrial clients).</span> </p> </li> <li> <p> <span>Performing relay testing, commissioning, maintenance, and troubleshooting at client substations.<br>Possess knowledge of structured programming, communication techniques, and protocols for Hitachi Energy relays and familiarity with other relays manufacturers is preferable.</span> </p> </li> <li> <p> <span>Troubleshooting system protection problems and schemes effectively and understanding different protection and communication schemes and supervising the installation and commissioning of automation systems, ensuring full compliance with standards and best practices.</span> </p> </li> <li> <p> <span>Demonstrate expertise in testing, commissioning, maintenance, and troubleshooting of protection systems for all equipment in substations up to 400 kV voltage level.</span> </p> </li> <li> <p> <span>Experience in testing, commissioning, maintenance, and troubleshooting of protection systems for all equipment in power stations and refinery environments.</span> </p> </li> <li> <p> <span>Training site operators in the use of works and ensure site-specific manuals and documentation are available before handover and are highly familiar with interlocking schemes and gas tripping schemes across all voltage levels from 380 V to 400 kV.</span> </p> </li> <li> <p> <span>Consult with clients or their representatives to determine their needs and priorities.</span> </p> </li> <li> <p> <span>Provide written procedures for switching, energization, isolation methods for testing, commissioning, and maintenance work.</span> </p> </li> <li> <p> <span>Coordinate and oversee substation technicians and electricians, and serve as project manager, serve as the primary customer contact for specific projects, maintain a professional presentation when dealing with employees, clients, and suppliers and be well-versed in technical and safety precautions when working in live substations.</span> </p> </li> <li> <p> <span>Possess leadership skills and the ability to lead, supervise, and assign work to the protection team and unnecessary outages while working in Brownfield substations or on any type of energized equipment and experience in troubleshooting electrical parts for various types of switchgear. </span> </p> </li> <li> <p> <span>You will be responsible for ensuring compliance with applicable external and internal regulations, procedures, and guidelines.</span> </p> </li> <li> <p> <span>Living Hitachi Energy s core values safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.</span> </p> </li> </ul> <p> </p> <p> <b>Your background</b> </p> <ul> <li> <p> <span>A bachelor s degree in electrical engineering is preferred.</span> </p> </li> <li> <p> <span>Minimum 7 years of relevant experience is required.</span> </p> </li> <li> <p> <span>Strong communication and interpersonal skills.</span> </p> </li> <li> <p> <span>Ability to work independently and as part of a team.</span> </p> </li> <li> <p> <span>Proficient in using testing and diagnostic equipment.</span> </p> </li> <li> <p> <span>Ability to interpret and work from electrical drawings and schematics.</span> </p> </li> <li> <p> <span>Strong organizational and time management skills.</span> </p> </li> <li> <p> <span>Commitment to continuous improvement and learning.</span> </p> </li> <li> <p> <span>Proficiency in both spoken &amp; written English language is required.</span> </p> </li> </ul> <p> </p> <p> </p> <p><br></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Source electrical equipment including emergency diesel generators, MV/LV transformers, MV switchgear and modifications woks, package substations, UPS systems, explosion-proof distribution boards, lighting fixtures, poles, local control stations, MOV isolating switches, HV/LV power/control cables, cable glands, earthing materials, and cable trays. Procure instrumentation/telecom equipment including control systems (PCS, ESD, FGS), telecom systems, motor-operated valves, ESD valves, pressure/temperature/level transmitters, Coriolis flowmeters, gauges, F&amp;G devices, auto sampling systems, I&amp;C cables, fiber optic cables, junction boxes, cable trays, glands, and tubes/fittings. Ensure compliance with electrical standards. Ensure compliance with instrumentation/telecom standards. Negotiate with suppliers the cost-effective electrical equipment. Negotiate with suppliers the cost-effective instrumentation / telecom / F&amp;G equipment. Collaborate with engineering teams for material compliance. Collaborate with engineering teams for material compliance. Close coordination with Post order team (Expediting Team) for Vendor deliverables Close coordination with Post order team (Expediting Team) for Vendor deliverables. Negotiate with suppliers for high-precision equipment.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>BSc in Electrical Instrumentation, or Telecom Engineering . Preference for graduates from recognized accredited universities or institutions in automation/control programs Knowledge of electrical systems (e.g., transformers, switchgear), of instrumentation/control systems, telecom equipment, and procurement, and safety standards. Oil &amp; gas I&amp;C experience, UAE/Kuwait standards.gas electrical systems experience, UAE/Kuwait standards. Enhances SCM team with electrical and I &amp; C expertise. 3 5 years of design and engineering experience in electrical systems as well as instrumentation and control prior to procurement role. Procurement experience in oil &amp; gas and marine projects.</p><p></p></section>

<p><h4>Building on our past. Ready for the future</h4> <p>Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We’re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.</p> <h4>Primary objective:</h4> <p>To support the project control personnel of various projects utilising the Worley project control systems in the set-up and execution phases of the project.</p> <p>Responsible for establishing all projects planning, cost estimation, cost controls, auditing controls and assurance processes including auditing to contractors and subcontractors.</p> <p>Responsible for the projects commercial and contractual management, people, administrative, finance, accounting and invoicing management.</p> <p>Manages all contract related matters.</p> <p>Supports the project control activities of various projects utilising the KERP project control systems and contractors requirement in the set-up and execution phases of the project.</p> <h4>Specific accountabilities:</h4> <ul> <li>Provide specialist project control services for the support of the KERP project control system.</li> <li>Liaise with project teams to ensure the correct utilization of the project control system based on project specific requirements and corporate guidelines.</li> <li>Take ownership of the project control function and ensure integrity of the data being processed.</li> <li>Prepare project planning dossier including project control procedure, project baseline schedule, deliverable register, S curve and histogram.</li> <li>Monitor the project based on baseline and submit both internal and external reports on time.</li> <li>Interface with project personnel to develop project forecasts for both schedule and cost.</li> <li>Actively participate in project management of changes.</li> <li>Liaise to clarify cost related issues and develop timely and meaningful monthly invoices.</li> <li>Coordinate and manage sub contracts.</li> <li>Implement financial controls including controlling authorizations of expenditure and cash flow projections.</li> <li>Must have proven track record in leading a team.</li> </ul> <h4>Qualification and experience:</h4> <ul> <li>Full-time bachelor’s degree in engineering (any discipline) from an accredited university.</li> <li>Minimum 10 years of total experience post graduate studies.</li> <li>Minimum 5 years of experience as a lead in project controls or similar title.</li> <li>Experience working in a PMC (Project Management Consultancy) environment.</li> <li>Demonstrated experience working in the Middle East project environment.</li> <li>Previous experience working with a contractor or in a comparable delivery model.</li> </ul> <h4>Moving forward together</h4> <p>We’re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.</p> <p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.</p> <p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.</p> <p>Whatever your ambition, there’s a path for you here. And there’s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">Job Summary <p>Agility is looking for a Lead Technology Architect to serve as the senior-most technical authority for our messaging, collaboration, and identity estate across multiple organizational environments.</p> <p>This is a hands-on leadership role you will personally design, build, secure, and operate our platforms while setting technical standards and leading a small team of 1 2 administrators. There is no higher technical authority within the function; you will own critical decisions end-to-end.</p> <p>The portfolio spans Microsoft Entra ID, Active Directory, Exchange Online/Hybrid, Microsoft Teams and SBC voice, SharePoint/OneDrive, Microsoft Defender, Intune endpoint fleet, certificates, DNS, enterprise AI platforms (Claude + Microsoft Copilot), and a large SSO/application integration portfolio.</p> <p> </p> Your Responsibilities Identity &amp; Access Management <ul> <li>Administer Microsoft Entra ID and on-premises AD across all environments</li> <li>Design and maintain Conditional Access, PIM, RBAC, MFA, and SSO (OAuth, OIDC, SAML)</li> <li>Own hybrid identity via Entra Connect</li> </ul> Messaging &amp; Email <ul> <li>Administer Exchange Online and Exchange Server (hybrid), including DAG, mail flow, and transport rules</li> <li>Own email security (gateway, DMARC, DKIM, SPF) and manage mailbox migrations</li> </ul> Collaboration &amp; Voice <ul> <li>Administer Microsoft Teams policies, governance, and SBC-based enterprise voice (dial plans, call queues, PSTN)</li> <li>Manage SharePoint Online and OneDrive, including external sharing and Known Folder Move</li> </ul> Security &amp; Threat Protection <ul> <li>Operate Microsoft Defender for Office 365 and Endpoint (EDR, ASR, security baselines)</li> <li>Lead incident response and maintain hardening controls aligned to CIS benchmarks</li> </ul> Endpoint Management (Intune) <ul> <li>Manage a mid-to-large multi-country fleet (Windows, macOS, Android, iOS)</li> <li>Own Autopilot, compliance/configuration policies, update rings, app packaging, and PowerShell remediation scripts</li> </ul> Certificates, DNS &amp; Web Publishing <ul> <li>Manage full SSL/TLS certificate lifecycle and DNS/CDN/WAF/DDoS platforms</li> <li>Own domain governance, registrations, and the web publishing approval workflow</li> </ul> Artificial Intelligence <ul> <li>Administer enterprise AI platforms including Claude integrations and Microsoft Copilot</li> <li>Design AI workflows and agents, govern AI access, model organizational data, and manage AI licensing</li> </ul> Architecture, Governance &amp; Leadership <ul> <li>Act as technical design authority; maintain standards, runbooks, and documentation</li> <li>Lead, mentor, and delegate to a small admin team</li> <li>Serve as final escalation point; on-call for critical incidents</li> </ul> <p> </p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">Your Qualifications Education </p><ul> <li>Bachelor's degree in Computer Science, IT, Engineering, or related field (Master's preferred)</li> <li>Exceptional hands-on experience may be considered in lieu of formal qualifications</li> </ul> Experience <ul> <li>12 15 years in enterprise IT infrastructure with deep Microsoft stack expertise</li> <li>5 7 years in a senior architect or technical lead role owning M365 environments end-to-end</li> <li>Proven hands-on experience with Exchange hybrid, Entra ID/AD, Intune at scale, and Microsoft Defender</li> <li>Practical experience with enterprise AI platforms (Claude, Microsoft Copilot), including workflow design and data modeling</li> </ul> Certifications (Required/Strongly Preferred candidates should hold several) <ul> <li>MS-102 Microsoft 365 Enterprise Administrator Expert</li> <li>SC-300 Identity and Access Administrator Associate</li> <li>SC-200 Security Operations Analyst Associate</li> <li>MD-102 Endpoint Administrator Associate</li> <li>MS-700 Teams Administrator Associate</li> <li>AZ-104 Azure Administrator Associate</li> <li>MS-203 Messaging Administrator Associate (or equivalent)</li> </ul> Other Requirements <ul> <li>Based in Kuwait or willing to relocate; on-site at Kuwait Head Office</li> <li>Eligible to hold Global Administrator / privileged access (enhanced background screening may apply)</li> <li>Fluent professional English; Arabic is an advantage</li> <li>On-call availability for critical incidents</li> </ul> <p> </p> <p> <strong>Your Proficiencies </strong> </p> <ul> <li>Excellent problem-solving skills and attention to detail </li> <li>Effective communication and collaboration skills </li> <li>Ability to work independently and handle multiple tasks </li> <li>Analytical and troubleshooting skills </li> <li>Stakeholder Management</li> <li>Technical Leadership &amp; Collaborative Influence</li> <li>Operational Excellence &amp; Adaptive Delivery</li> <li>Strategic Problem-Solving &amp; Architecture Design</li> <li>Fluent professional English; Arabic is an advantage</li> </ul> <p> </p><p></p></section>

<p><h4>Job Description</h4> <p>The Mechanical Metrology Engineer is the resident expert in his field and, in conjunction with the Kuwait Senior Engineer, provides engineering and consultant services to the GOK. Conducts research and studies new equipment to ensure that the latest developments in technique and equipment are included in metrology planning for future acquisition. Assists in the development and implementation of a Metrology QA Program as required. Assists in obtaining and maintaining laboratory QA accreditation.</p> <p>Assesses requirements and develops new measurement techniques and approaches related to mechanical, electro-mechanical, optical, electro-optical, chemical, and electro-chemical calibration methodology. Also performs analysis and evaluation of equipment test and performance requirements, and prescribes calibration approaches, test equipment, and servicing requirements necessary to assure measurement traceability. Directs, conducts, and evaluates the development of calibration procedures for assigned equipment categories. Conducts liaison and coordinates with technical societies and engineering facilities of other countries to remain current with the state-of-the-art and new measurement techniques.</p> <p>Responsible for laboratory facility and related environmental control development, operation, and maintenance. Coordinates with civilian contractor and military civil engineering organizations on all projects affecting metrology facilities to ensure timely completion. Acts as consultant to GOK military and ministries on matters pertaining to metrology facilities and environmental requirements. Conducts liaison and coordination with technical societies and engineering facilities of other countries to remain current with state-of-the-art for metrology facilities and environmental control systems. Works with the Electrical Engineer on all matters associated with power production and facilities.</p> <p>It is anticipated that engineers will be assigned as these job descriptions state and other related specific tasking details and priorities will be determined and set by the Commander, KAFMB and communicated to the contractor lead.</p> <h4>Qualifications</h4> <ul> <li>An associate’s degree in mechanical engineering, physics, or a related technical field from an accredited college or university and twelve (12) years of work experience operating, maintaining, troubleshooting, repairing, calibrating electronic precision measurement equipment and calibration laboratory reference standards. Includes qualification requirements D and E. OR;</li> <li>Completion of a U.S. military precision measurement and calibration school and twelve (12) years of work experience in the metrology and calibration field.</li> <li>Completion of a precision measurement and calibration school at an accredited school, or within a specialized calibration firm, and twelve (12) years of experience operating, maintaining, troubleshooting, repairing, and calibrating physical/dimensional precision measurement equipment and calibration laboratory reference standards.</li> <li>Five (5) years of experience in technical oversight and training responsibilities of calibration and repair technicians with three (3) years within the last five (5) years.</li> <li>Experience in researching requirements and maintaining calibration laboratory facility and related environmental control systems.</li> <li>Must have an active secret US government clearance.</li> <li>US citizenship is required to obtain a secret clearance.</li> </ul></p><p></p>

<p><br></p><p><b>Responsibilities:</b></p><ul><li>Conduct installation, de-installation, reconfiguration, modification work orders and updates of computer hardware and software in local, regional, or global intelligence architectures including NIPRNet, SIPRNet, JWICS, TDN2, Special Access Programs (SAP) networks and coalition networks.</li><li>Assist with configuration assessments, fielding, testing, modernization, reset, de-fielding, demilitarization and disposal of sensitive equipment.</li><li>Inspect, test, diagnose, troubleshoot, repair and perform preventive maintenance on complex antenna and radio frequency distribution systems.</li><li>Performs tests on electrical, electro-optical, and electro-mechanical equipment using multi-meters, oscilloscopes, signal generators, spectrum analyzers, bit error rate testers (BERT), and other complex and specialized test measurement and diagnostic equipment (TMDE), wire diagrams, logic and signal flow charts, technical manuals, troubleshooting charts, performance aids, schematic, and logic diagrams.</li><li>Repair analog and fiber optics cables.</li><li>Perform pre and post flight inspections on Guardrail Common Sensor (GRCS) mission equipment and data link.</li><li>Submit standard and non-standard repair parts requests.</li><li>Prepare equipment for transportation or shipment.</li><li>Prepare maintenance, property accountability, and transportation forms and records.</li><li>Coordinate and execute basic Able to maneuver in small spaces and lift up to 50lbs.</li><li>Must meet deploy ability standards and be willing to commit for a minimum of 12 months</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's Degree in Electronics or related fields from an accredited college/university and two years of relevant experience or seven years of military training in MI Systems Maintenance and Integration.</li><li>Experience on maintenance and integration on one or more of the following: GRCS; Enhanced Medium Altitude Reconnaissance Surveillance System (EMARSS) mission equipment; Tactical Command Data Link (TDCL); GRCS Operational Ground Station (OGS); Distributed Common Ground Station- Army (DCGS-A); software defined SIGINT collection platforms; biometrics collection, processing, exploitation, and dissemination equipment; CI/HUMINT support systems; TROJAN systems or satellite communication terminals providing TDN2; TENCAP systems; or intelligence non-standard equipment.</li><li>Information assurance certifications for Tier I and II computer, servers, networks and global intelligence architectures integration and maintenance.</li><li>US Citizen with active TS/SCI clearance is required.</li><li>This position or assignment may require a Polygraph, especially those requiring access to TDN2.</li></ul>

<p>CACI is seeking a MI Systems Maintainer Integrator to support our mission critical program in Kuwait. The Opportunity: As the selected MI Systems Maintainer Integrator candidate, you will perform installation, integration, configuration, employment, preventive maintenance, precision alignment, detailed and complicated diagnostics, troubleshooting, corrective maintenance, electronics monitoring and teardown of complex Command, Control, Communications, Computers, Intelligence, Surveillance, and Reconnaissance (C4ISR) and systems supporting SIGINT, FISINT, GEOINT, HUMINT, CI, TECHINT, OSINT, and All Source Intelligence for tasking, collection, processing, exploitation, production and dissemination at all echelons from tactical to national in multi-domain environments. Responsibilities: Conduct installation, de-installation, reconfiguration, modification work orders and updates of computer hardware and software in local, regional, or global intelligence architectures including NIPRNet, SIPRNet, JWICS, TDN2, Special Access Programs (SAP) networks and coalition networks. Assist with configuration assessments, fielding, testing, modernization, reset, de-fielding, demilitarization and disposal of sensitive equipment. Inspect, test, diagnose, troubleshoot, repair and perform preventive maintenance on complex antenna and radio frequency distribution systems. Perform tests on electrical, electro-optical, and electro-mechanical equipment using multi-meters, oscilloscopes, signal generators, spectrum analyzers, bit error rate testers (BERT), and other complex and specialized test measurement and diagnostic equipment (TMDE), wire diagrams, logic and signal flow charts, technical manuals, troubleshooting charts, performance aids, schematic, and logic diagrams. Repair analog and fiber optics cables. Perform pre and post flight inspections on Guardrail Common Sensor (GRCS) mission equipment and data link. Submit standard and non-standard repair parts requests. Prepare equipment for transportation or shipment. Prepare maintenance, property accountability, and transportation forms and records. Able to maneuver in small spaces and lift up to 50lbs. What You Can Expect: A culture of integrity. At CACI, we place character and innovation at the center of everything we do. As a valued team member, you ll be part of a high-performing group dedicated to our customer s missions and driven by a higher purpose to ensure the safety of our nation. An environment of trust. CACI values the unique contributions that every employee brings to our company and our customers - every day. You ll have the autonomy to take the time you need through a unique flexible time off benefit and have access to robust learning resources to make your ambitions a reality. A focus on continuous growth. Together, we will advance our nation's most critical missions, build on our lengthy track record of business success, and find opportunities to break new ground in your career and in our legacy. CACI is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.</p><p><strong>Desired Candidate Profile</strong></p><p>Associate Degree in Electronics or related field from an accredited college/university + two years of relevant experience OR Four years of military training in MI Systems Maintenance and Integration may be considered in lieu of degree Experience on maintenance and integration on one or more of the following: GRCS; Enhanced Medium Altitude Reconnaissance Surveillance System (EMARSS) mission equipment; Tactical Command Data Link (TDCL); GRCS Operational Ground Station (OGS); Distributed Common Ground Station- Army (DCGS-A); software defined SIGINT collection platforms; biometrics collection, processing, exploitation, and dissemination equipment; CI/HUMINT support systems; TROJAN systems or satellite communication terminals providing TDN2; TENCAP systems; or intelligence non-standard equipment. Information assurance certifications for Tier I and II computer, servers, networks and global intelligence architectures integration and maintenance are desired. US Citizen with active TS/SCI clearance is required Willing to work shift work, to include weekends and potentially holidays.</p>

<p><h4>Position summary</h4> <p>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards.</p> <p>Display advanced ability to read standard blueprints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks.</p> <p>Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters—ensuring all methods, materials and practices meet company standards and local and national codes—with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TVs. Use the Lockout/Tagout system before performing any maintenance work.</p> <p>Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds.</p> <p>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs,</p><p></p>

<p>CACI is seeking a MI Systems Maintainer Integrator II to support our mission critical Program in Kuwait. As the selected candidate, you will perform installation, integration, configuration, employment, preventive maintenance, precision alignment, detailed and complicated diagnostics, troubleshooting, corrective maintenance, electronics monitoring and teardown of complex Command, Control, Communications, Computers, Intelligence, Surveillance, and Reconnaissance (C4ISR) and systems supporting SIGINT, FISINT, GEOINT, HUMINT, CI, TECHINT, OSINT, and All Source Intelligence for tasking, collection, processing, exploitation, production and dissemination at all echelons from tactical to national in multi-domain environments.</p><p>Responsibilities:</p><ul><li>Conduct installation, de-installation, reconfiguration, modification work orders and updates of computer hardware and software in local, regional, or global intelligence architectures including NIPRNet, SIPRNet, JWICS, TDN2, Special Access Programs (SAP) networks and coalition networks.</li><li>Assist with configuration assessments, fielding, testing, modernization, reset, de-fielding, demilitarization and disposal of sensitive equipment.</li><li>Inspect, test, diagnose, troubleshoot, repair and perform preventive maintenance on complex antenna and radio frequency distribution systems.</li><li>Perform tests on electrical, electro-optical, and electro-mechanical equipment using multi-meters, oscilloscopes, signal generators, spectrum analyzers, bit error rate testers (BERT), and other complex and specialized test measurement and diagnostic equipment (TMDE), wire diagrams, logic and signal flow charts, technical manuals, troubleshooting charts, performance aids, schematic, and logic diagrams.</li><li>Repair analog and fiber optics cables.</li><li>Perform pre and post flight inspections on Guardrail Common Sensor (GRCS) mission equipment and data link.</li><li>Submit standard and non-standard repair parts requests.</li><li>Prepare equipment for transportation or shipment.</li><li>Prepare maintenance, property accountability, and transportation forms and records.</li><li>Able to maneuver in small spaces and lift up to 50lbs.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><p>Associate Degree in Electronics or related field from an accredited college/university + 4 years of relevant experience OR Six years of military training in MI Systems Maintenance and Integration may be considered in lieu of degree</p><p>Experience on maintenance and integration on one or more of the following: GRCS; Enhanced Medium Altitude Reconnaissance Surveillance System (EMARSS) mission equipment; Tactical Command Data Link (TDCL); GRCS Operational Ground Station (OGS); Distributed Common Ground Station- Army (DCGS-A); software defined SIGINT collection platforms; biometrics collection, processing, exploitation, and dissemination equipment; CI/HUMINT support systems; TROJAN systems or satellite communication terminals providing TDN2; TENCAP systems; or intelligence non-standard equipment.</p><p>Information assurance certifications for Tier I and II computer, servers, networks and global intelligence architectures integration and maintenance are desired.</p><p>US Citizen with active TS/SCI clearance is required</p><p>Willing to work shift work, to include weekends and potentially holidays.</p><p>Must be able to meet the requirements to obtain a work Visa 18 for Kuwait</p>

<p>Role &amp; Responsibilities We are seeking experienced Service Engineers, Senior Service Technicians, and Service Technicians for a leading Industrial Service Company in Kuwait specializing in compressed air systems. The candidate should have hands-on experience in maintenance, troubleshooting, overhaul, installation, commissioning, and repair of oil-injected rotary screw air compressors and compressed air dryers.</p><p>Compressor Brands Experience (Any One or More)</p><ul><li>Atlas Copco</li><li>Ingersoll Rand</li><li>Gardner Denver</li><li>Kaeser</li><li>Sullair</li><li>CompAir</li><li>ELGi</li><li>Chicago Pneumatic</li><li>Quincy</li><li>BOGE</li><li>Other internationally recognized industrial compressor brands</li></ul><p>Key Responsibilities</p><ul><li>Preventive and corrective maintenance of rotary screw air compressors.</li><li>Troubleshooting mechanical and electrical faults.</li><li>Major overhaul of compressor packages.</li><li>Airend inspection, repair, and replacement.</li><li>Bearing replacement and mechanical seal replacement.</li><li>Motor replacement and alignment.</li><li>Coupling alignment using dial indicators or laser alignment tools.</li><li>Maintenance of belt-drive and direct-drive compressor systems.</li><li>Oil system and cooling system servicing.</li><li>Replacement of oil separators, oil filters, and air filters.</li><li>Inlet valve, blowdown valve, minimum pressure valve, and thermostatic valve overhaul.</li><li>Solenoid valve troubleshooting and replacement.</li><li>Leak detection and repair.</li><li>Installation and commissioning of compressors after overhaul.</li><li>Performance testing and fault diagnosis.</li><li>Preparation of service reports and customer support documentation.</li></ul><p>Electrical Responsibilities</p><ul><li>Troubleshooting industrial electric motors.</li><li>Working knowledge of Star-Delta starters.</li><li>Experience with Soft Starters.</li><li>Experience with VFD/VSD drives.</li><li>Electrical control panel troubleshooting.</li><li>PLC and electronic compressor controller diagnostics.</li><li>Pressure and temperature sensor troubleshooting.</li><li>Reading and understanding electrical wiring diagrams.</li><li>Electrical fault diagnosis using multimeters and clamp meters.</li></ul><p>Air Dryer Experience</p><ul><li>Refrigerated Air Dryers.</li><li>Heatless Desiccant Dryers.</li><li>Heated Desiccant Dryers.</li><li>Automatic Condensate Drain Systems.</li><li>Air Filtration Systems.</li><li>Moisture Separators.</li><li>Dew Point Controllers.</li></ul><p>Tools Knowledge</p><p>Candidates should be familiar with :</p><ul><li>Dial Indicators</li><li>Laser Alignment Tools</li><li>Torque Wrenches</li><li>Bearing Pullers</li><li>Hydraulic Presses</li><li>Multimeters</li><li>Clamp Meters</li><li>Megger (Insulation Resistance Tester)</li><li>Pressure Gauges</li><li>Infrared Temperature Guns</li><li>Vibration Meters</li></ul><p>Other Requirements</p><ul><li>Good communication skills in English.</li><li>Ability to work independently at customer sites.</li><li>Strong troubleshooting skills.</li><li>Safety-conscious and team-oriented attitude.</li><li>Valid Passport preferred.</li><li>Ready to relocate to Kuwait.</li></ul><p><strong>Desired Candidate Profile</strong></p><h3>Preferred Candidate Profile</h3><p>Qualification</p><ul><li>ITI Mechanical / Electrical</li><li>Diploma in Mechanical Engineering</li><li>Diploma in Electrical Engineering</li><li>Equivalent Technical Qualification</li></ul><p>Experience</p><ul><li>3 to 15 years of relevant experience in industrial air compressor service and maintenance.</li><li>Hands-on field service experience is mandatory.</li><li>Experience in shutdowns, commissioning, and troubleshooting preferred.</li><li>Gulf experience will be an added advantage.</li></ul>

Job Title: MI Systems Maintainer Integrator II<br><br>Job Category: Engineering and Technical Support<br><br>Time Type: Full time<br><br>Minimum Clearance Required to Start: TS/SCI<br><br>Employee Type: Regular-Long Term Assignment<br><br>Percentage of Travel Required: Up to 25%<br><br>Type of Travel: Local<br><br>* * *<br><br>The Opportunity<br><br>CACI has an immediate opening for a MI Systems Maintainer Integrator to support our mission critical program in Kuwait City, Kuwait.<br><br>As the selected candidate, you will, in part, perform installation, integration, configuration, employment, preventive maintenance, precision alignment, detailed and complicated diagnostics, troubleshooting, corrective maintenance, electronics monitoring and teardown of complex Command, Control, Communications, Computers, Intelligence, Surveillance, and Reconnaissance (C4ISR) and systems supporting SIGINT, FISINT, GEOINT, HUMINT, CI, TECHINT, OSINT, and All Source Intelligence for tasking, collection, processing, exploitation, production and dissemination at all echelons from tactical to national in multi-domain environments.<br><br>Responsibilities<br><br>Conduct installation, de-installation, reconfiguration, modification work orders and updates of computer hardware and software in local, regional, or global intelligence architectures including NIPRNet, SIPRNet, JWICS, TDN2, Special Access Programs (SAP) networks and coalition networks. Assist with configuration assessments, fielding, testing, modernization, reset, de-fielding, demilitarization and disposal of sensitive equipment. Inspect, test, diagnose, troubleshoot, repair and perform preventive maintenance on complex antenna and radio frequency distribution systems. Performs tests on electrical, electro-optical, and electro-mechanical equipment using multi-meters, oscilloscopes, signal generators, spectrum analyzers, bit error rate testers (BERT), and other complex and specialized test measurement and diagnostic equipment (TMDE), wire diagrams, logic and signal flow charts, technical manuals, troubleshooting charts, performance aids, schematic, and logic diagrams. Repair analog and fiber optics cables. Perform pre and post flight inspections on Guardrail Common Sensor (GRCS) mission equipment and data link. Submit standard and non-standard repair parts requests. Prepare equipment for transportation or shipment. Prepare maintenance, property accountability, and transportation forms and records. Coordinate and execute basic Able to maneuver in small spaces and lift up to 50lbs. Must meet deploy ability standards and be willing to commit for a minimum of 12 months<br><br>Qualifications<br><br>Required: <br><br>Bachelor's Degree in Electronics or related fields from an accredited college/university and two years of relevant experience or seven years of military training in MI Systems Maintenance and Integration. Experience on maintenance and integration on one or more of the following: GRCS; Enhanced Medium Altitude Reconnaissance Surveillance System (EMARSS) mission equipment; Tactical Command Data Link (TDCL); GRCS Operational Ground Station (OGS); Distributed Common Ground Station- Army (DCGS-A); software defined SIGINT collection platforms; biometrics collection, processing, exploitation, and dissemination equipment; CI/HUMINT support systems; TROJAN systems or satellite communication terminals providing TDN2; TENCAP systems; or intelligence non-standard equipment. Information assurance certifications for Tier I and II computer, servers, networks and global intelligence architectures integration and maintenance. US Citizen with active TS/SCI clearance is required. <br><br>Desired<br><br>This position or assignment may require a Polygraph, especially those requiring access to TDN2.<br><br>What You Can Expect<br><br> A culture of integrity.<br><br>At CACI, we place character and innovation at the center of everything we do. As a valued team member, you’ll be part of a high-performing group dedicated to our customer’s missions and driven by a higher purpose – to ensure the safety of our nation.<br><br>An environment of trust.<br><br>CACI values the unique contributions that every employee brings to our company and our customers - every day. You’ll have the autonomy to take the time you need through a unique flexible time off benefit and have access to robust learning resources to make your ambitions a reality.<br><br>A focus on continuous growth.<br><br>Together, we will advance our nation's most critical missions, build on our lengthy track record of business success, and find opportunities to break new ground — in your career and in our legacy.<br><br>Pay Range<br><br>There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits.<br><br>The Proposed Salary Range For This Position Is<br><br>$68,400-$143,700<br><br>CACI is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.

???? URGENT HIRING – MULTIPLE POSITIONS – KUWAIT ???????? ???????? INDIAN NATIONALS ONLY ⚡ IMMEDIATE JOINING<br><br>Qc Inspector <br><br> Job Id :100194047<br><br>Jobs<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>???? URGENT HIRING – MULTIPLE POSITIONS – KUWAIT ????????<br><br>???????? INDIAN NATIONALS ONLY<br><br>⚡ Immediate Joining Required<br><br>We are urgently looking for qualified candidates for Oil & Gas / KNPC Projects in Kuwait.<br><br> MECHANICAL QC INSPECTOR<br><br>✔ Diploma / Degree in Mechanical Engineering<br><br>✔ Minimum 5+ years of relevant experience<br><br>✔ AWS / CSWIP Certification Mandatory<br><br>✔ Strong experience in piping, welding inspection, WPS/PQR, NDT and QA/QC documentation<br><br>✔ KNPC / KOC project experience is mandatory<br><br> CIVIL QC SUPERVISOR<br><br>✔ Diploma / Degree in Civil Engineering<br><br>✔ Minimum 5+ years of relevant experience<br><br>✔ Strong experience in Civil QA/QC activities, inspection, ITP, method statements, concrete and structural works<br><br>✔ KNPC / KOC project experience is mandatory<br><br> SAFETY ENGINEER<br><br>✔ Bachelor's Degree in Engineering<br><br>✔ Minimum 8+ years of relevant HSE / Safety experience<br><br>✔ Strong experience in Oil & Gas / EPC projects<br><br>✔ Knowledge of HSE procedures, risk assessment, PTW and site safety requirements<br><br>✔ KNPC / KOC project experience is mandatory<br><br> ELECTRICAL SUPERVISOR<br><br>✔ Degree in Electrical Engineering<br><br>✔ Minimum 6–8 Years Of Relevant Experience<br><br>✔ Strong experience in electrical installation, testing, commissioning and site supervision<br><br>✔ Experience in Oil & Gas / EPC projects<br><br>✔ KNPC / KOC project experience is mandatory<br><br>⚠️ INDIAN NATIONALS ONLY<br><br>⚠️ Only candidates who are ready for immediate joining should apply.<br><br>???? IMPORTANT: Please ensure your CV file is named with the position applied for.<br><br>Example: Mechanical QC Inspector – Your Name.pdf<br><br>???? Salary: Negotiable<br><br>???? STRICTLY NO CALLS – CALLS WILL NOT BE ENTERTAINED.<br><br>???? SEND YOUR CV ONLY VIA WHATSAPP: 69606248<br><br>Recruitment& Staffing<br><br>Basic Details<br><br>Qualification<br><br>Posted : 24 days ago<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : +965 69606248<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : Not-Mentioned

<p><b>Role: Mechanical Engineer</b></p><p>Industry Type: Engineering &amp; Construction</p><p>Department: Construction &amp; Site Engineering</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Construction Engineering</p><p>Education</p><p>UG: B.Tech / B.E. in Mechanical Engineering</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

We are hiring!<br><br> Technician <br><br> Job Id :100195079<br><br>Hire Resume Writers<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>We are looking for an experienced and skilled professional for the following positions<br><br> Reheating Furnace Supervisor Electrical Supervisor Electrical Technician Electrical Engineer EOT Crane Technician Roll Assembly Operator Guide Fitter Chemical & Mechanical Lab Operators Scrap Inspectors Raw Material Inspector<br><br>Interested candidates can share their CV's to career120295@gmail.com<br><br>Please mention the position applied for in the subject line.<br><br>Thank you<br><br>Hire Resume Writers<br><br>Basic Details<br><br>Qualification<br><br>Posted : 5 days ago<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : Not-Mentioned<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : career120295@gmail.com