Document Controller

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Kuwait in support of WEXMAC*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The EMT Paramedic provides Advance Life Support (ALS), emergency medical response, patient assessment, stabilization, treatment, and medical transport support for the Udari Range Complex which include two remote site medical clinics and emergency medical services operations under the V2X program. The incumbent supports 24/7 emergency medical readiness and response capability for the Base support Operations mission within a remote and austere operational environment. The EMT Paramedic responds to medical emergencies across the northern Territory in Kuwait and supports emergency medical operations involving U.S. military personnel, contractors, civilians, and authorized personnel in accordance with applicable Department of Defense (DoD), U.S Army, EMS, and V2X operational requirements. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Provide Advance Life Support (ALS) emergency medical response, assessment, stabilization, treatment, and transport services for authorized personnel on Camp Buehring, K-Crossing and Udari Range Complex. + Respond to emergency medical incidents throughout the area of responsibility-controlled areas and facilities in accordance with established EMS response requirements and operational protocols. + Operate emergency medical vehicles, ambulances, and associated emergency response equipment safely and effectively. + Provide emergency trauma care, airway management, cardiac care, medication administration, and emergency stabilization within authorized scope of practice. + Support emergency medical response activities involving life, limb, or eyesight-saving interventions. + Coordinate patient transfer activities and support MEDEVAC operations as required. + Maintain ready-maintain after-hours emergency response requirements due to the operations location. + Support clinic operations, patient care activities, and emergency medical standby requirements as directed. + Document patient care activities, treatments, assessments, and operational reports in accordance with applicable EMS and medical documentation standards. + Maintain emergency medical equipment, medications, supplies, and operational readiness of response vehicles and equipment. + Participate in mass casualty response planning, emergency preparedness exercises, and contingency medical operations. + Coordinate with providers, nurses, laboratory personnel, firefighters, external agencies, and medical leadership during emergency operations. + Support operational medical readiness, patient safety, infection prevention, and quality assurance activities. + Maintain all required certifications, competencies, continuing education, and operational training requirements throughout employment. + Comply with Emergency Medical Services Protocols, AR 40-30, DoDI6055.06-M, DoDI 6055.06, and Army Fire &amp; Emergency Services EMS Playbook requirements. Qualifications Minimum Qualifications Education: + High school diploma or equivalent required. + Graduate of an accredited Paramedic program Experience: + Minimum of two (2) years of experience within the last three (3) years working as a Paramedic required. + Experience in emergency medical services, emergency response, trauma care, or critical care transport preferred. + Experience supporting remote, overseas, military, or austere operational environments preferred. + Prior experience supporting government healthcare contracts or operational medicine environments preferred. Certifications and Licensure + Current National Registry of Emergency Medical Technicians (NREMT) Paramedic certification is required. + Current unrestricted state or national Paramedic certification/license required. + Current Basic Life Support (BLS) certification required. + Current Advanced Cardiac Life Support (ACLS) certification required. + Pediatric Advanced Life Support (PALS) certification preferred. + Prehospital Trauma Life Support (PHTLS) or International Trauma Life Support (ITLS) certification preferred. + Must maintain all required continuing education, certifications, licenses, and credentialing requirements for the duration of employment. + If assigned to fire station operations, must meet firefighter certification requirements in accordance with DoDM 6055.06 + Firefighter I + Firefighter II + Hazardous Materials Operations + Airport Firefighter + Driver/Operator Pumper + Driver/Operator Aircraft Rescue and Firefighting + Driver/Operator Mobile Water Supply + Telecommunicator I/II Knowledge, Skills, and Abilities + Strong knowledge of emergency medical services, Advanced Life Support (ALS), trauma care, and emergency response procedures. + Familiarity with operational medicine, remote medical operations, and austere environment healthcare delivery. + Ability to rapidly assess, prioritize, stabilize, and treat critically ill or injured patients. + Ability to function effectively in high-stress emergency response situations. + Strong communication, teamwork, and decision-making skills. + Ability to operate ambulances, emergency response equipment, and medical monitoring devices safely. + Knowledge of infection prevention, patient safety, and EMS documentation standards. + Ability to work collaboratively with multidisciplinary emergency response and healthcare teams. Physical and Environmental Requirements + Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects + Ability to work in clinical, field, operational, and emergency response environments. + Capability to function effectively within remote or austere weather conditions. + Ability to respond to medical emergencies, disasters, and contingency operations at any time. + Ability to lift, carry, push, and move patients, stretchers, and medical equipment during emergency operations. + Ability to work extended hours, rotating schedules, on-call requirements, and emergency response shifts as required. + Ability to work outdoors in varying environmental and weather conditions. Additional Requirements + Must meet all medical, security, credentialing, and deployment requirements per contract and V2X policy. + Must be able to obtain and maintain required access credentials and base access authorization. + Valid passport and ability to travel internationally as required. + Ability to comply with all Kuwait Host Nations operational, environmental, and safety requirements. + Must maintain professional conduct, emergency response readiness, and operational readiness standards required for overseas contingency operations. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> What you will be doing<br><br> * BIM Standards &amp; Guidelines Optimisation: Develop and maintain BIM standards, guidelines, and templates in alignment with ISO 19650 to ensure firm-wide consistency and compliance.<br> * Collaborate with department and Digital Delivery leadership to ensure BIM initiatives align with overall digital delivery goals<br> * Conduct audits to maintain BIM standards, in line with ISO 19650, and identify areas for improvement across projects.<br> * Contribute to the development and refinement of a strategic roadmap, identifying improvement areas and recommending adjustments to support the department’s digital transformation efforts and project delivery excellence.<br> * Coordinate training programs and upskilling initiatives to ensure continuous staff development.<br> * Develop and tailor BEPs for each project, ensuring they align with ISO 19650 standards and company protocols.<br> * Enhance content library management by ensuring Revit families, CAD blocks, 2D details, schedules, and other resources are consistently updated, well-organized, and easily accessible across teams.<br> * Focus on maintaining the library's relevance and usability by regularly monitoring usage patterns, assessing content alignment with project standards, and implementing updates to support efficient, standardized project delivery.<br> * Establish and enforce protocols to ensure model quality, effective coordination, clash detection, and issue management workflows.<br> * Lead initial BIM kickoff meetings to set project strategy, establish roles, and outline key milestones.<br> * Identify emerging trends and business opportunities related to BIM.<br> * Maintain ongoing oversight of the CDE to monitor access, support seamless collaboration, and ensure compliance with project needs throughout its lifecycle.<br> * Manage and utilise digital tools to oversee content libraries, perform model health checks, and automate routine tasks. Ensure that content and models are efficient, optimized, and compliant with project standards.<br> * Manage the exchange of discipline-specific design models through the CDE or Electronic Document Management System (EDMS), ensuring compliance with established protocols and effective collaboration between teams.<br> * Monitor and assess project execution to identify and address any deviations from established standards, supporting project teams in achieving quality and regulatory compliance.<br> * Monitor the effectiveness of these tools, address issues as they arise, and provide training and support to project teams for their successful implementation.<br> * Monitor project progress, maintain high QA/QC standards, and ensure the delivery of accurate and consistent design models.<br> * Post initial setup is complete, transitions day-to-day BIM management responsibilities to the appropriate project team members, maintaining oversight and conducting periodic reviews to support quality assurance and address any issues as they arise.<br> * Oversee BIM processes across all project stages to ensure compliance with ISO 19650 and/or project standards, maintain rigorous QA/QC protocols, and uphold consistent BIM practices.<br> * Process Improvement &amp; Optimisation: Drive initiatives to streamline BIM processes by developing automation routines that improve productivity while ensuring adherence to established BIM standards and quality protocols.<br> * Provide comprehensive digital delivery and BIM orientation for new hires, ensuring familiarity with tools, standards, and processes to support a smooth transition into their roles.<br> * Set clear benchmarks and KPIs, tracking performance metrics, and providing regular reports on progress, challenges, and achievements.<br> * Review proposals for BIM requirements and provide input on best practices to support project goals.<br> * Support and promote Pace’s digital delivery and BIM capabilities by contributing to marketing efforts through material creation, web content, literature, interviews, and presentations at client-focused conferences and industry events.<br> * Stay informed on emerging industry trends, evaluating and recommending software solutions that support evolving project and organizational goals.<br> * Utilise established CDE templates as a baseline and configure them to suit project-specific requirements ensuring access controls, information exchange protocols, coordination workflows, and issue management processes are correctly defined and implemented.<br> * Support department management with allocating BIM resources strategically across projects to meet varying needs.<br> * Act as the primary BIM contact during project setup, coordinating requirements with clients and consultants and addressing escalated issues as required.<br><br><br>Required Experience<br><br> * Minimum 10 years’ experience in Infrastructure Department with expertise in BIM implementation and management.<br><br><br><br>Education<br><br> * Bachelor’s Degree in Civil Engineering.<br> * Master’s Degree in Structural Engineering or a related discipline (Preferred).<br><br><br>Certifications &amp; Memberships<br><br> * AutoCAD Civil 3D Certified Professional is Preferable.<br> * ISO 19650 Certification<br> * Recognized BIM qualification (Preferred)<br><br>Essential Skills<br><br> * Autodesk Construction Cloud (ACC), Revit, AutoCAD, Navisworks, Power BI.<br> * Etabs, Safe, SAP2000, S- Concrete, RAM Connections, Ram Concept, Concide Beam.<br> * IMAGINiT Clarity, Kinship (Preferred).<br> * Adobe Creative Cloud, Microsoft Office 365. &nbsp;<br> * Expertise in standards such as BS/PAS 1192 and ISO 19650.<br> * Strong understanding of BIM management processes, coordination workflows, and their application across design, construction, and delivery phases.<br> * Strong understanding of OIR (organisational data needs for strategic goals), AIR (data for asset management and lifecycle value), and PIR (project-specific data for design, construction, and delivery).<br> * Experience managing a Common Data Environment to ensure effective collaboration and information exchange.<br> * Knowledge of Dynamo automation and similar scripting tools (Preferred).<br> * Understanding of COBie/IFC workflows for data exchange and compliance (Preferred).<br> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills">About the Role<br><br> * The Senior Digital Delivery Coordinator (SDDC) / BIM Manager is responsible for the development, implementation, and enforcement of digital delivery and BIM standards, workflows, and best practices across the Infrastructure department, ensuring consistency in all BIM projects, files, models, and departmental processes. Based in Kuwait, the SDDC works closely with the Digital Delivery Department, IT, and the Director of Infrastructure Department, facilitating collaboration across teams to oversee both local and international projects. Directly reporting to their department's Director and indirectly report through a technical stream to the Director of the Digital Delivery Department.<br> * This role may occasionally require international travel for project coordination, cross-office collaboration, and participation in industry events to support best practices and continuous improvement.<br> * As a vital part of the Digital Delivery team, the SDDC collaborates with the infrastructure team to drive the adoption of digital standards, workflows, and information management strategies across the department. Working closely with department Digital Delivery Coordinators (DDCs), the SDDC ensures alignment with company objectives and industry best practices.<br> * This role oversees BIM processes across the department, ensuring compliance with ISO 19650 and supporting consistent, high-quality project delivery.<br> * In addition to project oversight, the SDDC works with the Digital Delivery Department and IT to maintain a robust digital infrastructure, including essential software and hardware, to support efficient project execution and data management.<br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities include maintenance and serviceability procedures for subsystem components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of airframes and power plants engineering principles, techniques, and methods in the maintainability of existing equipment and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Description: + Apply and provide a thorough working knowledge of airframes and power plant systems to include aircraft modification procedures and experience with specific airframe, hydraulic, engine, and propeller systems, systems integration, system/component failure analysis, inspection, repair, and testing of airframes and power plant systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. + Performance abilities include performance of maintenance and servicing related aircraft components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation and incorporates applicable technical directives and bulletins. + Troubleshoots and/or repairs malfunctions in the aircraft airframes and power plants systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J MRC/MIMs, to include performing calibration procedures and required functional tests. + Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. + Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged component + Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. + Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer’s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. + Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. + Performs applicable “O” and “I” level maintenance functions in support of In-Flight Refueling Systems and rebuild shop and Aircraft Tire &amp; Wheel rebuilding. + Perform scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment, pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated airframes and power plants equipment systems. + Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. + Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/ + Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures + When necessary, perform other duties and supervisory functions, critical to the function of the program and to assure compliance with the Performance Work Statement (PWS). Qualifications EDUCATION and/or EXPERIENCE: Graduation from a standard four (4) year high school or equivalent (GED) This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance. Material &amp; Equipment Directly Used Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arm What We Bring: At V2X we strive to be market competitive in our total reward offerings. Employee benefits include the following: + Healthcare coverage + Life insurance, AD&amp;D, and disability benefits + Retirement plan + Wellness programs + Paid time off, including holidays and leave of absences + Eligible Tuition Reimbursement + Learning and Development resources + Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> What you will be doing<br><br> * BIM Standards &amp; Guidelines Optimisation: Develop and maintain BIM standards, guidelines, and templates in alignment with ISO 19650 to ensure firm-wide consistency and compliance.<br> * Collaborate with department and Digital Delivery leadership to ensure BIM initiatives align with overall digital delivery goals<br> * Conduct audits to maintain BIM standards, in line with ISO 19650, and identify areas for improvement across projects.<br> * Contribute to the development and refinement of a strategic roadmap, identifying improvement areas and recommending adjustments to support the department’s digital transformation efforts and project delivery excellence.<br> * Coordinate training programs and upskilling initiatives to ensure continuous staff development.<br> * Develop and tailor BEPs for each project, ensuring they align with ISO 19650 standards and company protocols.<br> * Enhance content library management by ensuring Revit families, CAD blocks, 2D details, schedules, and other resources are consistently updated, well-organized, and easily accessible across teams.<br> * Focus on maintaining the library's relevance and usability by regularly monitoring usage patterns, assessing content alignment with project standards, and implementing updates to support efficient, standardized project delivery.<br> * Establish and enforce protocols to ensure model quality, effective coordination, clash detection, and issue management workflows.<br> * Lead initial BIM kickoff meetings to set project strategy, establish roles, and outline key milestones.<br> * Identify emerging trends and business opportunities related to BIM.<br> * Maintain ongoing oversight of the CDE to monitor access, support seamless collaboration, and ensure compliance with project needs throughout its lifecycle.<br> * Manage and utilise digital tools to oversee content libraries, perform model health checks, and automate routine tasks. Ensure that content and models are efficient, optimized, and compliant with project standards.<br> * Manage the exchange of discipline-specific design models through the CDE or Electronic Document Management System (EDMS), ensuring compliance with established protocols and effective collaboration between teams.<br> * Monitor and assess project execution to identify and address any deviations from established standards, supporting project teams in achieving quality and regulatory compliance.<br> * Monitor the effectiveness of these tools, address issues as they arise, and provide training and support to project teams for their successful implementation.<br> * Monitor project progress, maintain high QA/QC standards, and ensure the delivery of accurate and consistent design models.<br> * Post initial setup is complete, transitions day-to-day BIM management responsibilities to the appropriate project team members, maintaining oversight and conducting periodic reviews to support quality assurance and address any issues as they arise.<br> * Oversee BIM processes across all project stages to ensure compliance with ISO 19650 and/or project standards, maintain rigorous QA/QC protocols, and uphold consistent BIM practices.<br> * Process Improvement &amp; Optimisation: Drive initiatives to streamline BIM processes by developing automation routines that improve productivity while ensuring adherence to established BIM standards and quality protocols.<br> * Provide comprehensive digital delivery and BIM orientation for new hires, ensuring familiarity with tools, standards, and processes to support a smooth transition into their roles.<br> * Set clear benchmarks and KPIs, tracking performance metrics, and providing regular reports on progress, challenges, and achievements.<br> * Review proposals for BIM requirements and provide input on best practices to support project goals.<br> * Support and promote Pace’s digital delivery and BIM capabilities by contributing to marketing efforts through material creation, web content, literature, interviews, and presentations at client-focused conferences and industry events.<br> * Stay informed on emerging industry trends, evaluating and recommending software solutions that support evolving project and organizational goals.<br> * Utilise established CDE templates as a baseline and configure them to suit project-specific requirements ensuring access controls, information exchange protocols, coordination workflows, and issue management processes are correctly defined and implemented.<br> * Support department management with allocating BIM resources strategically across projects to meet varying needs.<br> * Act as the primary BIM contact during project setup, coordinating requirements with clients and consultants and addressing escalated issues as required.<br><br>Required Experience<br><br> * Minimum 10 years’ experience in Infrastructure Department with expertise in BIM implementation and management.<br><br><br><br>Education<br><br> * Bachelor’s Degree in Civil Engineering.<br> * Master’s Degree in Structural Engineering or a related discipline (Preferred).<br><br><br>Certifications &amp; Memberships<br><br> * AutoCAD Civil 3D Certified Professional is Preferable.<br> * ISO 19650 Certification<br> * Recognized BIM qualification (Preferred)<br><br>Essential Skills<br><br> * Autodesk Construction Cloud (ACC), Revit, AutoCAD, Navisworks, Power BI.<br> * Etabs, Safe, SAP2000, S- Concrete, RAM Connections, Ram Concept, Concide Beam.<br> * IMAGINiT Clarity, Kinship (Preferred).<br> * Adobe Creative Cloud, Microsoft Office 365. &nbsp;<br> * Expertise in standards such as BS/PAS 1192 and ISO 19650.<br> * Strong understanding of BIM management processes, coordination workflows, and their application across design, construction, and delivery phases.<br> * Strong understanding of OIR (organisational data needs for strategic goals), AIR (data for asset management and lifecycle value), and PIR (project-specific data for design, construction, and delivery).<br> * Experience managing a Common Data Environment to ensure effective collaboration and information exchange.<br> * Knowledge of Dynamo automation and similar scripting tools (Preferred).<br> * Understanding of COBie/IFC workflows for data exchange and compliance (Preferred).<br> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills">About the Role<br><br> * The Senior Digital Delivery Coordinator (SDDC) / BIM Manager is responsible for the development, implementation, and enforcement of digital delivery and BIM standards, workflows, and best practices across the Infrastructure department, ensuring consistency in all BIM projects, files, models, and departmental processes. Based in Kuwait, the SDDC works closely with the Digital Delivery Department, IT, and the Director of Infrastructure Department, facilitating collaboration across teams to oversee both local and international projects. Directly reporting to their department's Director and indirectly report through a technical stream to the Director of the Digital Delivery Department.<br> * This role may occasionally require international travel for project coordination, cross-office collaboration, and participation in industry events to support best practices and continuous improvement.<br> * As a vital part of the Digital Delivery team, the SDDC collaborates with the infrastructure team to drive the adoption of digital standards, workflows, and information management strategies across the department. Working closely with department Digital Delivery Coordinators (DDCs), the SDDC ensures alignment with company objectives and industry best practices.<br> * This role oversees BIM processes across the department, ensuring compliance with ISO 19650 and supporting consistent, high-quality project delivery.<br> * In addition to project oversight, the SDDC works with the Digital Delivery Department and IT to maintain a robust digital infrastructure, including essential software and hardware, to support efficient project execution and data management.<br> </div>

<p>The Marketing Manager leads the planning and execution of marketing agenda across retail promotions, digital media, social channels, customer engagement, partnerships, events and in-store communication. The role combines market insight, creative leadership and disciplined performance analysis to grow revenue, customer frequency, basket value, loyalty and brand preference.</p><p>A hands-on retail marketer who understands Kuwaiti consumers, translates commercial priorities into effective campaigns, controls agencies and budgets, and uses data to improve sales, traffic, conversion, retention and marketing return.</p><p><br></p><p><strong>KEY ACCOUNTABILITIES</strong></p><ol><li>Marketing Strategy and Annual Plan Develop the annual marketing strategy, budget and campaign calendar in line with sales targets, category priorities and management direction. Translate business objectives into integrated customer-acquisition, retention, promotion, brand and channel plans. Define target audiences, positioning, value propositions and channel roles for major campaigns and commercial periods. Maintain a rolling 90-day activation plan and ensure clear ownership, timing, budget and success measures for every initiative.</li><li>Customer, Market and Competitor Insight Monitor consumer behavior, retail trends, competitor pricing, promotional activity, media activity and local market developments. Analyze customer segments, purchase patterns, category performance, traffic, conversion and basket behavior to identify growth opportunities. Commission or conduct practical customer research and convert findings into campaign, assortment, pricing and service recommendations. Provide management with concise insight on market opportunities, competitive threats and emerging customer expectations.</li><li>Brand and Creative Management Maintain a clear and consistent Panda Market Kuwait brand identity across stores, digital platforms, delivery channels and external communication. Develop campaign concepts, briefs, messaging and content standards that are locally relevant and commercially focused. Review and approve creative materials, photography, video, Arabic and English copy, signage and promotional collateral before release. Protect brand reputation and ensure all communication is accurate, culturally appropriate and aligned with company values.</li><li>Retail Promotions and In-store Activation Plan seasonal campaigns, category promotions, new-product launches, clearance events and tactical sales-driving offers with Commercial and Operations teams. Coordinate promotional mechanics, supplier participation, pricing communication, store displays, point-of-sale material and execution deadlines. Ensure stores receive complete campaign toolkits and audit the quality and consistency of implementation. Evaluate promotional uplift, margin impact, stock availability, cannibalisation and post-campaign learning.</li><li>Digital, social media and Performance Marketing Lead social-media, search, display, video, email, messaging and other digital activity using a disciplined content and media calendar. Set objectives and audiences for paid campaigns; control media buying, tracking, optimization and reporting. Grow qualified reach, engagement, store visits, leads and sales while improving cost per acquisition and return on advertising spend. Maintain rapid, professional responses to online comments, messages and reputation issues in coordination with Customer Service and Operations.</li><li>CRM, Loyalty and Customer Retention Develop customer databases, segmentation, consent practices and targeted communication journeys in line with applicable requirements. Design loyalty, repeat-purchase, reactivation and customer-lifecycle initiatives that improve visit frequency and lifetime value. Use transaction and campaign data to personalize offers and test customer propositions by segment. Track retention, repeat purchase, redemption and response rates and recommend improvements based on evidence.</li><li>E-commerce and Delivery-channel Marketing Coordinate marketing for the company's online, WhatsApp, delivery-platform or other remote-order channels as applicable. Improve digital merchandising, campaign visibility, product content and conversion in partnership with Operations and IT. Align online prices, offers and availability with approved commercial plans and protect a consistent customer experience. Analyze digital-channel traffic, conversion, order value, acquisition source and promotion effectiveness.</li><li>Partnerships, Events and Public Relations Develop commercially relevant partnerships with suppliers, payment providers, local communities, media, influencers and service platforms. Plan store events, launches, sponsorships and activations that generate measurable awareness, traffic, engagement or sales. Manage media enquiries, public announcements and reputation-sensitive communication with appropriate approval. Evaluate partners and influencers for audience relevance, brand fit, credibility, cost and measurable results.</li><li>Budget, Analytics and Marketing Effectiveness Prepare and control the marketing budget, commitments, purchase requests, invoices, accruals and supplier reconciliations. Define campaign KPIs before launch and maintain dashboards for sales uplift, traffic, conversion, reach, engagement, acquisition cost and return. Conduct campaign post-evaluations, distinguish incremental impact from normal trading, and document practical lessons. Reallocate spending toward higher-performing channels and stop low-value activity when evidence does not support continuation.</li><li>Team, Agency and Cross-functional Leadership Lead and develop the marketing team and manage agencies, freelancers, media partners, printers, photographers and production suppliers. Set clear briefs, deliverables, quality standards, deadlines and service expectations; challenge costs and approve work within authority. Partner closely with Sales, Purchasing, Operations, Warehouse, E-commerce, Finance, HR, IT and Customer Service. Build a culture of creativity, commercial accountability, disciplined execution, learning and respectful teamwork.</li></ol><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Marketing, Business Administration, Communications or a closely related discipline.</li><li>Minimum 6-8 years of progressive marketing experience, including at least 3 years in a managerial or senior supervisory role.</li><li>Strong retail, supermarket, department-store, FMCG, consumer-goods or e-commerce experience is required; Kuwait-market exposure is strongly preferred.</li><li>Demonstrated responsibility for campaigns that delivered measurable sales, traffic, customer acquisition, retention or market-share outcomes.</li><li>Hands-on knowledge of social media, paid media, content, CRM, analytics, campaign tracking and digital performance optimization.</li><li>Practical experience with promotional calendars, in-store communication, supplier-funded campaigns, events and local activations.</li><li>Strong Excel and presentation skills; familiarity with analytics dashboards, advertising platforms, CRM tools and creative-workflow systems.</li><li>Full professional proficiency in Arabic and English, with strong written, presentation and copy review capability.</li><li>Mobility ability to attend stores, events, agencies and partners are preferred.</li><li><strong>REQUIRED COMPETENCIES</strong></li><li>Commercial orientation Connects brand and customer activity to sales, margin, traffic, conversion, frequency and return on investment.</li><li>Customer insight Understands Kuwaiti consumers, identifies meaningful segments and turns data into relevant propositions.</li><li>Creative judgment Produces clear briefs, recognizes strong ideas and maintains high standards across Arabic and English communication.</li><li>Digital fluency Uses channel data and experimentation to improve targeting, creative, conversion and media efficiency.</li><li>Planning Coordinates multiple campaigns, suppliers and deadlines without losing accuracy or store execution quality.</li><li>Influence Builds productive relationships and secures alignment across owners, commercial teams, operations, suppliers and agencies.</li><li>Leadership Sets priorities, coaches the team, manages performance and creates accountability for measurable outcomes.</li></ul>

<p>POSITION SUMMARY Process all reservation requests, changes, and cancellations received by phone, fax, or mail. Identify guest reservation needs and determine appropriate room type. Verify availability of room type and rate. Explain guarantee, special rate, and cancellation policies to callers. Accommodate and document special requests. Answer questions about property facilities/services and room accommodations. Follow sales techniques to maximize revenue. Input and access data in reservation system. Indicate special room reservation types (e.g., complimentary rooms, employee discounts, travel agent inspection rates, and wholesale reservations) by inputting the correct code and rate into the reservation system. Follow proper escalation procedures when addressing guest concerns. Follow all company policies and procedures; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets; protect the privacy and security of guests and coworkers. Welcome and acknowledge all guests according to company standards; anticipate and address guests service needs; assist individuals with disabilities; thank guests with genuine appreciation. Speak with others using clear and professional language; answer telephones using appropriate etiquette. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Comply with quality assurance expectations and standards. Move, lift, carry, push, pull, and place objects weighing less than or equal to 10 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.</p><p><strong>Desired Candidate Profile</strong></p><p>Education: High school diploma or G.E.D. equivalent. Related Work Experience: No related work experience. Supervisory Experience: No supervisory experience. License or Certification: None</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities include maintenance and serviceability procedures for subsystem components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of airframes and power plants engineering principles, techniques, and methods in the maintainability of existing equipment and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Major Job Activities Description: · Apply and provide a thorough working knowledge of airframes and power plant systems to include aircraft modification procedures and experience with specific airframe, hydraulic, engine, and propeller systems, systems integration, system/component failure analysis, inspection, repair, and testing of airframes and power plant systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. · Performance abilities include performance of maintenance and servicing related aircraft components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation and incorporates applicable technical directives and bulletins. · Troubleshoots and/or repairs malfunctions in the aircraft airframes and power plants systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J MRC/MIMs, to include performing calibration procedures and required functional tests. · Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. · Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components · Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. · Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer’s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. · Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. · Performs applicable “O” and “I” level maintenance functions in support of In-Flight Refueling Systems and rebuild shop and Aircraft Tire &amp; Wheel rebuilding. · Perform scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment, pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated airframes and power plants equipment systems. · Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. · Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/ · Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures · When necessary, perform other duties and supervisory functions, critical to the function of the program and to assure compliance with the Performance Work Statement (PWS). Qualifications EDUCATION and/or EXPERIENCE: Graduation from a standard four (4) year high school or equivalent (GED) This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance. Material &amp; Equipment Directly Used Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arm. What We Bring: At V2X we strive to be market competitive in our total reward offerings. Employee benefits include the following: Healthcare coverage Life insurance, AD&amp;D, and disability benefits Retirement plan Wellness programs Paid time off, including holidays and leave of absences Eligible Tuition Reimbursement Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p><strong>Job Description:</strong></p><p>Our client, EL-KADESIA Engineering Industries, is an established company operating within the engineering and industrial sector. The company is seeking a technically skilled and customer-focused IT Helpdesk Engineer to provide reliable IT support, maintain day-to-day technology operations, and ensure efficient resolution of end-user technical issues.</p><p><strong>Job Summary:</strong></p><p>Our client is looking for an experienced and service-oriented IT Helpdesk Engineer to provide first-line technical support to employees across on-site and remote environments. The successful candidate will be responsible for troubleshooting hardware, software, network, email, and user-access issues while supporting systems including Windows, Microsoft Office, Active Directory, CCTV, and telephone infrastructure. The role requires strong troubleshooting and problem-solving abilities, excellent communication skills, and the ability to prioritize and resolve multiple technical requests while maintaining high standards of service and information security.</p><p><strong>Key Responsibilities:</strong></p><p><strong>IT Helpdesk &amp; User Support</strong></p><ul><li>Provide first-line technical support to users both on-site and remotely.</li><li>Diagnose and resolve hardware, software, and user-related technical issues.</li><li>Troubleshoot computers, printers, peripheral devices, and software applications.</li><li>Respond to support requests according to established priorities and service levels.</li><li>Document technical issues, solutions, and actions taken.</li><li>Escalate complex incidents to the appropriate technical support level when required.</li></ul><p><strong>Systems &amp; Software Support</strong></p><ul><li>Install, configure, and maintain Windows operating systems and Microsoft Office applications.</li><li>Perform software installations, updates, and configurations in accordance with company policies.</li><li>Manage user accounts and access permissions through Active Directory, including account creation, modification, disabling, and password resets.</li><li>Provide support for Outlook and Exchange, including troubleshooting email synchronization and connectivity issues.</li><li>Support endpoint security solutions, including antivirus and basic cybersecurity tools.</li></ul><p><strong>Network &amp; Infrastructure Support</strong></p><ul><li>Troubleshoot basic LAN, Wi-Fi, and internet connectivity issues.</li><li>Apply practical knowledge of IP addressing, DNS, and DHCP to diagnose network problems.</li><li>Support basic data backup and restoration activities in accordance with approved policies and authorization levels.</li><li>Coordinate with IT and telecommunications service providers when required.</li></ul><p><strong>CCTV &amp; Telephone Systems</strong></p><ul><li>Provide basic technical support for CCTV systems, including monitoring, camera connectivity, and troubleshooting.</li><li>Support IP and analog telephone systems and internal extensions.</li><li>Coordinate with external vendors and service providers to resolve infrastructure-related issues.</li></ul><p><strong>IT Service Management</strong></p><ul><li>Log, classify, track, update, and close incidents through the company's IT ticketing system.</li><li>Maintain accurate records of incidents, resolutions, and recurring technical issues.</li><li>Prepare clear technical documentation to support knowledge sharing and future troubleshooting.</li></ul><p><strong>Qualifications</strong></p><p><strong>Education</strong></p><ul><li>Bachelor's degree in Computer Science, Information Technology, Management Information Systems (MIS), or a related field.</li><li>Equivalent practical experience may be considered where appropriate.</li></ul><p><strong>Experience</strong></p><ul><li>3-5 years of practical experience in an IT Helpdesk, IT Support, or similar technical support role.</li><li>Hands-on experience supporting end users in a corporate or industrial environment is preferred.</li></ul><p><strong>Required Skills</strong></p><ul><li>Strong knowledge of Windows operating systems and Microsoft Office applications.</li><li>Hands-on experience with Active Directory and user account/access management.</li><li>Practical understanding of networking fundamentals, including IP, DNS, and DHCP.</li><li>Strong troubleshooting, analytical, and problem-solving capabilities.</li><li>Good knowledge of Outlook and email troubleshooting.</li><li>Ability to manage multiple support requests and prioritize tasks effectively.</li><li>Strong communication skills with the ability to explain technical solutions clearly to non-technical users.</li><li>Good understanding of information security, confidentiality, and protection of company data.</li><li>Strong customer-service orientation and ability to remain calm when handling urgent incidents.</li><li>Good organizational and time-management skills.</li><li>Ability to work independently as well as collaboratively with internal teams and external service providers.</li></ul><p><strong>Preferred Skills &amp; Experience</strong></p><ul><li>Experience with FortiGate, VPNs, and remote-access solutions.</li><li>Familiarity with IT Service Management and ticketing platforms such as ServiceNow or Jira.</li><li>Basic knowledge of Linux or macOS.</li><li>Good understanding of cybersecurity principles and endpoint-protection solutions.</li><li>Experience supporting CCTV systems and IP/analog telephone systems.</li><li>Experience coordinating with telecommunications, IT, and technology service providers.</li></ul><p><strong>Behavioral &amp; Professional Competencies</strong></p><ul><li>High level of commitment, integrity, confidentiality, and professionalism.</li><li>Strong internal customer-service and active-listening skills.</li><li>Ability to handle urgent technical incidents calmly and professionally.</li><li>Strong ability to prioritize tasks and manage multiple support requests.</li><li>Willingness to continuously learn and develop technical knowledge.</li><li>Ability to prepare clear and accurate technical documentation.</li><li>Strong teamwork and coordination skills.</li><li>Ability to work effectively with different departments, vendors, and external service providers.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor's degree in Computer Science, Information Technology, Management Information Systems (MIS), or a related field. Equivalent practical experience may be considered where appropriate.</li><li>3-5 years of practical experience in an IT Helpdesk, IT Support, or similar technical support role. Hands-on experience supporting end users in a corporate or industrial environment is preferred.</li><li>Strong knowledge of Windows operating systems and Microsoft Office applications.</li><li>Hands-on experience with Active Directory and user account/access management.</li><li>Practical understanding of networking fundamentals, including IP, DNS, and DHCP.</li><li>Strong troubleshooting, analytical, and problem-solving capabilities.</li><li>Good knowledge of Outlook and email troubleshooting.</li><li>Ability to manage multiple support requests and prioritize tasks effectively.</li><li>Strong communication skills with the ability to explain technical solutions clearly to non-technical users.</li><li>Good understanding of information security, confidentiality, and protection of company data.</li><li>Strong customer-service orientation and ability to remain calm when handling urgent incidents.</li><li>Good organizational and time-management skills.</li><li>Ability to work independently as well as collaboratively with internal teams and external service providers.</li><li>Experience with FortiGate, VPNs, and remote-access solutions.</li><li>Familiarity with IT Service Management and ticketing platforms such as ServiceNow or Jira.</li><li>Basic knowledge of Linux or macOS.</li><li>Good understanding of cybersecurity principles and endpoint-protection solutions.</li><li>Experience supporting CCTV systems and IP/analog telephone systems.</li><li>Experience coordinating with telecommunications, IT, and technology service providers.</li><li>High level of commitment, integrity, confidentiality, and professionalism.</li><li>Strong internal customer-service and active-listening skills.</li><li>Ability to handle urgent technical incidents calmly and professionally.</li><li>Strong ability to prioritize tasks and manage multiple support requests.</li><li>Willingness to continuously learn and develop technical knowledge.</li><li>Ability to prepare clear and accurate technical documentation.</li><li>Strong teamwork and coordination skills.</li><li>Ability to work effectively with different departments, vendors, and external service providers.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Job Title: IT Support</span></p><br> <p><span><span>Classification:</span> Institutional Support</span><br><span><span>Reports To:</span> Technology Support Coordinator</span></p><br> <p><span><span>Location:</span> Saad Al Abdullah, Kuwait</span></p><br> <p><span>About The American International University</span></p><br> <p><span>American International University (AIU) is a private institution in Kuwait, founded in 2019, offering undergraduate programs based on the American model of higher education. AIU provides degrees in Engineering, Architecture and Design, and Business Administration, with English as the language of instruction. The University is committed to fostering intellectual, cultural, and personal growth, preparing graduates for leadership roles in a global society.</span></p><br> <p><span>For more information, visit:&nbsp;www.aiu.edu.kw</span></p><br> <p><span><span>Job Summary</span><br>The IT Support Technician is responsible for providing frontline technical support to faculty, staff, and students at American International University (AIU). This role focuses on day-to-day troubleshooting, deployment, and maintenance of end-user technology, classrooms, laboratories, offices, academic software environments, and event-related IT systems. The position ensures a high level of service availability, responsiveness, and user satisfaction across the campus.</span></p><br> <p><span>Role Impact<br></span>This role directly supports the continuity of academic instruction and administrative operations by ensuring that technology issues are resolved promptly and learning and working environments remain fully functional. The IT Support Technician plays a key role in minimizing downtime, supporting classroom and laboratory readiness, enabling successful university events, and ensuring effective use of institutional technology resources for students, faculty, and staff.</p><br> <p><span><span>Key Responsibilities</span></span></p><br> <p><u>IT Support &amp; Helpdesk Operations</u></p><br> <ul> <li>Provide desktop and end-user support for PCs, laptops, printers, and peripherals across the university.</li> <li>Install, configure, and set up new computer systems, hardware, and standard software images.</li> <li>Diagnose and resolve hardware, operating system, and application issues in a timely and efficient manner.</li> <li>Log, track, and resolve incidents and service requests using the IT Helpdesk Ticketing System (ServiceDesk Plus).</li> <li>Support and train users on key university applications including Microsoft 365, Canvas LMS, and Banner SIS.</li> <li>Assist students, faculty, and staff with login issues, access problems, and basic authentication-related troubleshooting.</li> <li>Conduct IT orientation and onboarding support for new faculty and staff members.</li> <li>Test and validate software updates, patches, and application deployments prior to or following rollout.</li> <li>Printing Student and Staff ID Cards and granting necessary access.</li> <li>Escalate unresolved or complex issues to the Technology Support Coordinator with appropriate documentation.</li> </ul> <p><u>Classroom, Lab &amp; Office Technology Support </u></p><br> <ul> <li>Support daily operations of classrooms, laboratories, meeting rooms, and offices to ensure technology readiness.</li> <li>Assist with setup, testing, and troubleshooting of audio-visual systems, presentation equipment, and hybrid learning tools.</li> <li>Perform pre-session checks to ensure systems are operational for classes, exams, and meetings.</li> </ul> <p><u>Academic Software &amp; Lab Environment Support</u></p><br> <ul> <li>Install, configure, and maintain academic and instructional software within computer laboratories in coordination with Academic Affairs and IT leadership.</li> <li>Provide operational support for academic software platforms used in teaching and learning environments.</li> <li>Assist students and faculty with software access, licensing issues, and application-related troubleshooting during lab sessions.</li> <li>Ensure lab systems are configured consistently and remain compliant with academic and licensing requirements.</li> <li>Support testing and validation of academic software updates prior to semester rollouts.</li> </ul> <p><u>Endpoint Deployment &amp; Asset Support</u></p><br> <ul> <li>Assist with deployment, imaging, configuration, and replacement of Windows 10/11 PCs, laptops, and shared systems.</li> <li>Maintain and update IT asset inventory, including computers, peripherals, and assigned equipment.</li> <li>Support ID card printing management systems and associated hardware as required.</li> </ul> <p><u>User &amp; System Administration</u></p><br> <ul> <li>Assist with domain access, user account creation, and email registration under established procedures.</li> <li>Administer and maintain Active Directory accounts, group memberships, and basic permissions.</li> <li>Support Microsoft 365 user accounts, email configuration, and collaboration tools.</li> <li>Assist with user account setup, password resets, access requests, and basic identity-related troubleshooting.</li> <li>Support faculty, staff, and students in the effective use of Microsoft 365, email, and collaboration tools.</li> </ul> <p><u>Network &amp; Infrastructure Support</u></p><br> <ul> <li>Assist with basic network connectivity troubleshooting and performance-related issues.</li> <li>Support setup and management of laptops, projectors, and presentation equipment for classrooms and meetings.</li> <li>Support System Administrator and Network Engineer with diagnostics and implementation of systems.</li> </ul> <p><u>Event Technology &amp; Technical Support</u></p><br> <ul> <li>Coordinate the setup, configuration, and testing of technical requirements for university events, workshops, forums, and special activities.</li> <li>Provide on-site technical support during events to ensure uninterrupted operation of systems, presentations, and audio-visual equipment.</li> <li>Perform basic analysis of event technical requirements and proactively identify necessary systems, equipment, and configurations based on event type, scale, and venue.</li> <li>Demonstrate initiative in understanding requestor requirements and independently preparing appropriate technical solutions.</li> <li>Coordinate with the Events Department, internal IT teams, and external vendors to deliver reliable event technology support.</li> <li>Assist with setting up and teardown of event-related technology before and after events.</li> </ul> <p><u>Time Attendance System Administration</u></p><br> <ul> <li>Support administration and operational use of the Time Attendance System (COSEC).</li> <li>Generate payroll-related attendance reports and weekly faculty attendance reports as required.</li> <li>Upload and maintain monthly shift schedules within the COSEC system based on approved rosters.</li> <li>Implement approved shift changes and schedule updates requested by the HR Department.</li> <li>Assist with troubleshooting attendance discrepancies and system-related issues in coordination with HR and IT leadership.</li> </ul> <p><u>Documentation, Regulatory Compliance, and Continuous Improvement</u><br></p><br> <ul> <li>Document resolved issues, troubleshooting steps, and common fixes to support knowledge sharing.</li> <li>Follow IT policies, SOPs, security guidelines, and service standards.</li> <li>Identify recurring issues and suggest improvements to processes or configurations.</li> </ul> <p><span>Key Competencies</span></p><br> <ul> <li>Strong troubleshooting and problem-solving skills</li> <li>Practical knowledge of Windows, Mac and Linux operating systems, end-user hardware, and academic lab environments</li> <li>Ability to support students and faculty in high-usage instructional settings</li> <li>Basic understanding of networking, identity systems, and cloud-based productivity platforms</li> <li>Customer-service mindset with clear communication skills</li> <li>Ability to follow procedures, prioritize tasks, and work under supervision</li> <li>Willingness to support extended hours during peak academic periods or events</li> </ul> <p><span><span>Educational Qualifications &amp; Certification</span></span></p><br> <ul> <li><span>Diploma or bachelor’s degree in computer science, Information Technology, or a related field.</span></li> <li><span>Entry-level or relevant IT certifications are an advantage (e.g., Microsoft, CompTIA, or equivalent).</span></li> </ul> <p><span>How to Apply</span></p><br> <p>Interested candidates should visit the Job Opportunities section on our website and submit a resume and cover letter via:&nbsp;https://aiu.edu.kw/careers/jobs</p><br> <p>Applications will be reviewed on a rolling basis until the position is filled.</p><br> <p><span>AIU is an equal opportunity employer committed to academic excellence, professional integrity, and the principled governance of Kuwaiti higher education.</span></p><br> </div>

<p><h4>Job description</h4> <p>The Army Aviation GSE - Ground Support Equipment Mechanic diagnoses malfunctions and repairs ground support equipment.</p> <p>Three (3) years of aviation GSE experience in the last six (6) years. Actual and recent aviation-related experience in the repair, modification, maintenance, and overhaul of related equipment being serviced and their associated components (APUs, etc).</p> <p>Inspects and approves completed maintenance actions, solves repair problems by studying drawings, wiring diagrams and schematics, and technical publications.</p> <p>Uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, maintain equipment records, and document maintenance actions, and analyzes, diagnoses, and repairs GSE using conventional and digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, circuit card testers, transistor testers, and hand tools.</p> <p>Maintains external fuel and grounding systems.</p> <p>Performs scheduled and unscheduled maintenance on GSE - inspects, tests, and operates GSE to determine equipment serviceability and proper operation.</p> <p>Services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air.</p> <p>Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical publications.</p> <p>Disassembles and assembles malfunctioning GSE accessories and components.</p> <p>Removes, disassembles, repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories, stencils and marks GSE in accordance with technical publications, stores, handles, labels, uses, and disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations.</p> <p>Prepares GSE for storage and mobility deployment; and operates, cleans, inspects, and services GSE towing vehicles.</p> <p>Maintains vehicle records.</p> <p>Maintains and updates paper and electronic equipment records.</p> <p>Provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations.</p> <p>Practices good housekeeping, tool control, foreign object damage prevention, and safety at all times.</p> <p>Performs other qualified duties as requested.</p> <h4>Minimum requirements</h4> <ul> <li>High school diploma or equivalent.</li> <li>U.S. military technical school or specialized training course is desired.</li> <li>Three (3) years of aviation GSE experience in the last six (6) years. Actual and recent aviation-related experience in the repair, modification, maintenance, and overhaul of related equipment being serviced and their associated components (APUs, etc).</li> <li>Valid U.S. passport required, and able to travel internationally with minimum 6 blank pages and two (2) plus years' validity on passport expiration date at the time of hiring.</li> <li>Must be able to obtain and maintain facility Public Trust NAC-I. Note: U.S. citizenship is required for facility Public Trust NAC-I at this work location.</li> <li>Able to pass CENTCOM medical requirements for deployment (attend CRC).</li> <li>Must be able to obtain a Kuwait visa.</li> </ul> <h4>Knowledge & skills</h4> <ul> <li>Knowledge of inspection, servicing, troubleshooting, and repair of ground support equipment.</li> <li>Knowledge of military publications (including electronic manuals), drawings, blueprints, microfilm, diagrams, and schematics is mandatory.</li> <li>Knowledge of military and/or company forms required by work assignments.</li> <li>Individual must be able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical requirements</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper personal protective equipment (PPE).</li> <li>Must be able to pass a respirator physical and fit test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all-weather conditions.</li> </ul> <h4>Compensation details</h4> <p>Not applicable.</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance.</li> <li>Paid time off and holidays.</li> <li>Retirement benefits (including 401(k) matching).</li> <li>Educational reimbursement.</li> <li>Parental leave.</li> <li>Employee stock purchase plan.</li> <li>Tax-saving options.</li> <li>Disability and life insurance.</li> <li>Pet insurance.</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Original posting: 06/10/2026 - Until filled.</p> <p>The company anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>The company is proud to be an equal opportunity employer. Hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><br></p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>Drilling Operations:</strong> Ensures the safety of personnel, equipment, and the efficiency of operations on the drill floor and other drilling operation associated areas. Plans and schedules all drilling and associated activity. Directs personnel towards achieving optimum job performance according to the client s requirements. Ensures any deviation from client well plan (Game Plan) is approved by STP, and that Client representative has documented in written form, and that necessary management of change or deviation is approved in Synergi prior to operation starts. Consult with the STP and Client s Representative regarding the progress of the Drilling program and associated operations, keeping the driller informed about the ongoing drilling program objectives and communicating any changes in plans. Ensure that space-out drawings are correct and are posted in the drillers cabin. Overseeing that post-jarring sheet are filled out and understood by the driller. Relieve the Driller at the Driller s console as operational requirement demands. Ensures that all necessary equipment is ready for the next phase of the Drilling / Workover program and that necessary rig procedures, including JSA and PTW, are prepared on time and with good quality for the actual operations. Assists &amp; supervises drilling crew at the location at all relevant times, ensuring circulating time is sufficient and the well is stable on trips, when the BHA is being worked and whenever there is a hole problem. Operates the drilling unit with strict adherence to company Drilling &amp; Well Control manuals, by reviewing and approving all drilling related work permits.</p><p><strong>Well Control:</strong> Ensure that well control requirements are in place according to operational requirements - assist in supervising well killing operations in any well control situation. Plans &amp; monitors comprehensive well control parameters to proactively identify any signs of well control issues for early detection and swift response. Maintains and regularly tests well control equipment, in accordance with Company s and Client s requirement, ensuring its readiness and effectiveness in critical situations. Perform all well control calculations (i.e., mud weight increase, initial and final circulating pressures, number of strokes, etc.).</p><p><strong>Management of Major Emergencies:</strong> To be part of the Rig s Emergency Response Team as detailed in the Emergency Plan and Company Procedures. Ensure that all personnel are instructed in the procedures to be adopted in the case of an emergency. Ensure that Well Control and general safety drills are held and recorded in accordance with Company requirements.</p><p><strong>Materials &amp; Equipment:</strong> Assist STP in ensuring the location has sufficient stock of parts and materials to perform drilling and associated operations as per contractual requirements. Ensure planned maintenance and repair of drilling equipment including draw-works, mud pumps, top drive, rotary table, and BOP are completed and documented to ensure optimum condition and proper availability of required tools. Responsible for housekeeping standards in all drilling areas, sack store and mud pump room.</p><p><strong>Rig Move:</strong> Support STP in planning all related rigs move activities, equipment, supplies, personnel in compliance with the Rig move Procedures. Assesses the current and new location, considering factors such as safety, lifting equipment availability at location, preparation for rig-up operations, Supervise the Rig move team during rigging down and rigging up activities to ensure they are followed efficiently and safely.</p><p><strong>Client Management:</strong> Develops and maintains positive working relationships with other department heads, supervisors, operator's representatives, subcontractors, and all personnel on the rig. Responds to client requests and needs concerning materials, equipment, and personnel after getting adequate management approval.</p><p><strong>Reporting and Documentation:</strong> Maintains proper logs and records, promptly submitting required reports as per company protocols and regulatory standards. Prepare accurate and timely reports, including daily drilling reports, equipment status reports and incident reports, to document drilling activities and operational performance. Review all operational/technical bulletins, communicate pertinent points to crew members and implement all directives as required. Assist STP in initiating, monitoring, and recording all maintenance and repairs work in collaboration with maintenance department.</p><p><strong>People Management &amp; Development:</strong> Provide clear instructions to their team regarding their duties, responsibilities, and any necessary safety precautions prior to commencing work. Mentor, develop and train their team to ensure safe and effective operations. Identifies opportunities for skill and career advancement, works to support the professional growth of their team members. Ensure their team receives the necessary required training to perform their duties safely and effectively through on-the-job training, classroom training and participation in safety drills and exercises. Support, promote and actively participate in ADES s Competency Assurance Program for their team. Evaluates the performance of their team on constant and fair feedback basis, identify areas for improvement, drive ADVANCE process to formalize a performance management culture.</p><p><strong>Job Requirements:</strong></p><p><strong>Education &amp; Experience:</strong> Minimum education level required: High School or Vocational/Technical Qualification. Minimum (8) years of working experience in land drilling and workover operations with contractors with a career history showing time served as Assistant Driller, Driller, and Tool pusher. Must have working experience on Onshore rigs.</p><p><strong>Skills/Competencies Required:</strong> Fluent in English (written &amp; spoken). PC literate in Microsoft Office Advanced Mathematical skills adding, subtracting, dividing, multiplying , drilling practice, drilling fluids. Leadership, Situation Awareness, Communication, Teamwork, Performance shaping factors stress and fatigue, inspecting work.</p><p><strong>Physical Requirements:</strong> Regularly climbing (stairs, ladders). Regularly bending, twisting, and standing. Ability to work outdoors under all extreme weather conditions (Noise / Humidity / Cold / Heat etc.). Ability to work on day/night shifts.</p><p><strong>Certifications:</strong> As per ADES Training Matrix. Valid Well Control (Well Sharp / IADC) Certificate.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Education &amp; Experience:</strong> Minimum education level required: High School or Vocational/Technical Qualification. Minimum (8) years of working experience in land drilling and workover operations with contractors with a career history showing time served as Assistant Driller, Driller, and Tool pusher. Must have working experience on Onshore rigs.</p><p><strong>Skills/Competencies Required:</strong> Fluent in English (written &amp; spoken). PC literate in Microsoft Office Advanced Mathematical skills adding, subtracting, dividing, multiplying , drilling practice, drilling fluids. Leadership, Situation Awareness, Communication, Teamwork, Performance shaping factors stress and fatigue, inspecting work.</p><p><strong>Physical Requirements:</strong> Regularly climbing (stairs, ladders). Regularly bending, twisting, and standing. Ability to work outdoors under all extreme weather conditions (Noise / Humidity / Cold / Heat etc.). Ability to work on day/night shifts.</p><p><strong>Certifications:</strong> As per ADES Training Matrix. Valid Well Control (Well Sharp / IADC) Certificate.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><br></p><p><b>Responsibilities:</b></p><ol><li>Operate and maintain advanced laser equipment for various dermatological procedures, ensuring compliance with safety protocols and standards to deliver effective treatment outcomes.</li><li>Conduct thorough patient assessments to determine the suitability of laser treatments, utilizing your expertise to recommend appropriate procedures based on individual needs.</li><li>Monitor and document patient progress throughout the treatment process, using electronic health records to track outcomes and communicate findings to the healthcare team.</li><li>Provide pre-treatment consultations to educate patients about the procedures, potential risks, and expected results, fostering a trusting relationship and enhancing patient satisfaction.</li><li>Collaborate with dermatologists and other medical professionals to develop personalized treatment plans that align with the latest advancements in dermatological care.</li><li>Stay updated on industry trends and technological advancements in laser treatments, participating in ongoing training to enhance your skills and knowledge.</li><li>Ensure a clean and safe working environment by adhering to infection control protocols and maintaining equipment in optimal condition to prevent complications.</li><li>Assist in marketing initiatives by sharing success stories and patient testimonials, contributing to the growth of the practice and enhancing its reputation in the community.</li><li>Participate in team meetings and training sessions, sharing insights and experiences to promote a culture of continuous improvement and professional development.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Proficient in operating various laser technologies used in dermatology, ensuring optimal treatment delivery.</li><li>Strong understanding of dermatological conditions and treatment protocols to provide informed patient care.</li><li>Excellent communication skills to effectively educate patients and collaborate with medical staff.</li><li>Detail-oriented with strong organizational skills to manage patient records and treatment documentation accurately.</li><li>Ability to work in a fast-paced environment while maintaining a high level of patient care and safety.</li><li>Commitment to continuous learning and professional development in the field of dermatology.</li><li>Team player with a positive attitude, contributing to a supportive and collaborative work culture.</li></ul></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Role &amp; responsibilities Perform quality control (QC) tests on raw materials, ingredients, finished beverages, and packaging materials. Collect and analyze samples from production lines according to quality control procedures. Conduct physical, chemical, and microbiological tests as per PepsiCo quality standards. Test water quality, including pH, hardness, TDS, chlorine, conductivity, and microbiological parameters. Analyze syrup and beverage samples for Brix (sugar content), acidity, CO levels, color, and taste. Verify product specifications before production, during processing, and after packaging. Monitor Critical Control Points (CCPs) in accordance with HACCP and Food Safety Management Systems. Ensure compliance with GMP (Good Manufacturing Practices), HACCP, ISO 22000, and food safety regulations. Calibrate and maintain laboratory instruments such as pH meters, refractometers, spectrophotometers, conductivity meters, and weighing balances. Record, document, and maintain accurate laboratory test results and quality reports. Report non-conforming products immediately and assist in root cause analysis. Support production teams by providing timely quality feedback and corrective actions. Monitor sanitation and hygiene standards in laboratory and production areas. Verify cleaning and sanitation effectiveness through environmental monitoring. Conduct shelf-life and stability testing of finished products. Assist during internal, customer, and external quality audits. Ensure proper storage, handling, and disposal of laboratory chemicals and reagents. Follow laboratory safety procedures and use appropriate Personal Protective Equipment (PPE). Maintain laboratory cleanliness and ensure all equipment is in good working condition. Participate in continuous improvement initiatives to enhance product quality and laboratory efficiency.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Diploma/Bachelor's degree in Food Technology, Food Science, Chemistry, Microbiology, Biotechnology, or a related field. Experience: 25 years in a beverage, soft drink, bottled water, dairy, or food manufacturing company. Experience in multinational FMCG companies such as PepsiCo, Coca-Cola, Nestl, or similar food and beverage manufacturers is highly preferred.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The Systems Administrator II is responsible for the administration and operational support for servers, workstations and applications in a Windows Active Directory environment. The candidate must be able to coordinate, troubleshoot and oversee system backups, hardware installation, software installation, and system upgrades. The position will require individuals to solve complex technology problems, providing solutions and mentorship to internal and external customers that will have a positive impact on the day-to-day efficiencies. The Systems Administrator maintains exceptional conduct, discipline, and communicate effectively with a diverse work force to perform assigned tasks. This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver’s license in order to be qualified for this position. Responsibilities + Operates and maintains all aspects of server administration to include, but is not limited. + to, Microsoft 2008 Active Directory, Windows Internet Name Service (WINS), Domain Name System (DNS), Domain Host Configuration Protocol (DHCP), print queues, etc. + Responsible for the daily administration of Exchange servers (2008 or higher) and Outlook Web Access (OWA). + Management of Microsoft Systems Management Server (SMS), Microsoft Operations Manager (MOM) or Microsoft System Center Operations Manager (SCOM), Microsoft System Center Configuration Manager (SCCM), and Microsoft Windows Server Update Services (WSUS). + Uses VERITAS Backup Exec to conduct file server backup and restores. + Maintains systems availability and performs regular maintenance on equipment. + Proficient at hardware maintenance and troubleshooting of various vendor server platforms including Dell, HP, LTO tape library, fiber switch, and SANs. + Maintains antivirus and security requirements by the US Army standards and regulations. + Provides user and Microsoft Exchange account maintenance as required. + Establishes shift schedules. + Performs employee appraisals, training records and is well versed with the V2X Leadership guide. + Performs other duties and assignments as required. Qualifications + Qualifications + Security Clearance: + Requires an active Secret Clearance. + Education / Certifications: One-year related experience may be substituted for one year of education if degree is required. + Bachelor’s Degree in Information Technology (IT). + This position requires candidates to adhere to DoD 8570.01M. All candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. Baseline certifications cannot also be used as a Computing Environment (CE) certification. + The authorized certifications for this job title are listed as follows: + BASELINE: + Cisco: CCNA: Certified Network Associate - Security + Cisco: CCNP: Certified Network Professional - Security + CompTIA: CASP+ ce: Advanced Security Practitioner + CompTIA: CySA+ ce: Cybersecurity Analyst (Cannot be used as a dual qualifier) + CompTIA: Security+ ce + GIAC: GCED: Certified Enterprise Defender + GIAC: GCIH: Certified Incident Handler: Certified Incident Handler + GIAC: GICSP: Industrial Cyber Security Professional + GIAC: GSEC: Security Essentials + ISACA: CISA: Certified Information Systems Auditor + ISC2: CISSP (or Associate): Certified Information Systems Security Professional + ISC2: SSCP: Systems Security Certified Practitioner + COMPUTING ENVIRONMENT (CE): + CompTIA: Server + + CompTIA: CySA+ ce: Cybersecurity Analyst (Cannot be used as a dual qualifier) + Microsoft: 365 Certified: Endpoint Administrator Associate + Microsoft: 365 Certified: Enterprise Administrator Expert + Microsoft: 365 Certified: Messaging Administrator Associate + Microsoft: 365 Certified: Modern Desktop Administrator Associate + Microsoft: 365 Certified: Security Administrator Associate + Microsoft: Certified: Azure Administrator Associate + Microsoft: Certified: Azure Database Administrator Associate + Microsoft: Certified: Azure Security Engineer Associate + Microsoft: Certified: Azure Solutions Architect Expert + Microsoft: Certified: Identity and Access Administrator Associate + Microsoft: Certified: Information Protection Administrator Associate + Microsoft: Certified: Security Operations Analyst Associate + Microsoft: MCSA: SQL 2016 Database Admin + Microsoft: MCSA: SQL 2016 Database BI Development + Microsoft: MCSA: SQL 2016 Database Dev + Microsoft: MCSA: Windows 10 + Microsoft: MCSA: Windows Server 2012 + Microsoft: MCSA: Windows Server 2016 + Microsoft: MCSE: Cloud Platform and Infrastructure + Microsoft: MCSE: Core Infrastructure + Microsoft: MCSE: Database Management and Analytics + Microsoft: MCSE: Enterprise Devices and Apps + Microsoft: MCSE: Private Cloud 2012 + Microsoft: MCSE: Productivity Solutions Expert + Microsoft: MCSE: Server Infrastructure 2012 + Microsoft: MCT: Certified IT Professional + Microsoft: MCT: Certified Systems Administrator + Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree in a Software Engineering or Business Information Systems discipline for three years general experience. + The Systems Administrator II is required to be an expert in all functions of both IAT Level I and IAT Level II positions relating to a Windows Server operating system environment. + The Systems Administrator II must be able to apply extensive knowledge of a variety of the IA field’s concepts, practices, and procedures to ensure the secure integration and operation of all enclaves (NIPR, SIPR, etc.) systems. + Must be able to rely on extensive experience and judgment to plan and accomplish goals for the enclave environment. + Must have at least five (5) years of practical experience working with Windows Server 2012 or higher operating systems (OS) and Active Directory tools. + Candidate must possess a basic understanding of security principles and their application to an enterprise AD environment. + SUPERVISORY / BUDGETARY RESPONSIBILITIES + At least two years of supervisory or lead experience is preferred. + Update proprietary applications regarding: + Update section employee daily status, leave, sick, on site, etc. + Verify and track accomplishment of section monthly or quarterly safety and compliance training. + Purge section employee expired certifications. + Verify section employee compliance training in Virtual Training Record. + Verify section vehicle logs are being kept accurately and uploaded. + Ensure section personnel are maintaining their 8570 / 8140 certifications. + Review weekly training compliance reports for accomplishment prior to suspense. + Review and approve leave forms ensuring before approval all compliance training is current. + Coordinate transportation and integration of new and returning employees. + Document and promptly counsel poor performance and policy violations. + Enforce all V2X, GO 1, and dress code policies. + Provide annual employee appraisal feedback in a professional and constructive manner. + Demonstrate V2X values Integrity, Respect, Responsibility, and Professionalism. + Ensure the safety of personnel and monthly safety inspections are properly conducted. + Communicate effectively up and down the chain of command. + Manage work schedules. + Conduct proper new and returning employee orientation and ensure employee thorough understanding and can accomplish all tasks in the Employee Job Certification (EJC). + Work with employees and HR when emergencies or abnormal circumstances occur. + To the best of your ability render all decisions based upon our company values and principles of Integrity, Respect, Responsibility, and Professionalism. Working Environment + The work environment will be 95% indoors and 5% outdoors. + The outdoor work environment may exceed temperatures 100 Degrees F. Candidate must be able to physically withstand extreme heat. Physical Activities + Must be capable of lifting, pushing, and pulling items weighing up to 50 lbs. + Must be capable of wearing Personal Protective Equipment (helmet and plated vest) which can weigh 25 to 40lbs, for extended preiods of time. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients. #LI-YG1 #clearance</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview This position description is subject to change at any time as needed to meet the requirements of the program or company. Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. AH-64E Helicopter Instructor / Operator (LCT): Ali Al Salem Air Base, Kuwait V2X GTS has a requirement for an Instructor / Operator (IO) in support of the Kuwaiti Air Force at Ali Al Salem Air Base, Kuwait . The Instructor / Operator (I/O) delivers high quality simulator instruction for the AH64E and serves as a technical expert in AH64E aircrew training. This role oversees mission setup, instruction, evaluation, and simulator operation required under W-TRS TDL 025 and reports directly to the V2X-GTS Program Manager. The successful candidate must be a United States citizen, with proof of citizenship and a current U.S. passport. Standard work week is five (5) days per week for up to eight (8) hours per day while at OCONUS work site(s). Responsibilities Responsibilities: Flight Instruction &amp; Tactical Training: + Advanced Instruction: Deliver advanced AH-64E flight instruction following the U.S. Army Aircrew Training Manual (ATM). + Core Systems: Train pilots in aircraft systems, instrument flight, and flight management system operation. + Emergency Procedures: Teach emergency response protocols and critical flight safety procedures. + Tactical Operations: Instruct students in mission scenarios, terrain flight, combat tactics, and gunnery. + Environmental Modes: Provide day, night, and Night Vision Goggle (NVG) instruction. + Flight Briefings: Conduct formal pre-flight briefs, in-flight instruction, and comprehensive post-flight debriefs. Student Evaluation &amp; Performance Tracking: + Multi-Environment Assessment: Mentor Kuwaiti student pilots across classroom, simulator, and in-flight environments. + Progression Testing: Conduct end-of-stage check rides and formal evaluations under applicable ATMs. + Aviation Regulations: Ensure compliance with Aircrew Training Manuals and FAA Order 7110.65 air traffic standards. + Flight Plan Critique: Review and critique pilot flight planning for accuracy, providing corrective guidance. + Records Management: Document performance grades and feedback in Individual Aircrew Training Folders (IATF). + After Action Reviews: Facilitate formal After Action Reviews (AARs) to track pilot development. Simulator Operations &amp; Technical Management: + I/O Support: Provide Instructor / Operator (IO) support, services, and oversight for all TADSS platforms. + Scenario Development: Build simulator profiles featuring instrument flight, fault insertion, and weather control. + Mission Configuration: Configure simulators with requested mission scenarios, weather, and active flight planning data. + Pre-Flight Prep: Check in aircrews and provide required operational publications, forms, and checklists. + Event Monitoring: Monitor real-time simulator training events to answer questions and provide instant feedback. Curriculum Development &amp; Domain Expertise: + SME Advisory: Serve as Subject Matter Expert (SME) for aircrew training manuals, aviation procedures, and simulator employment. + Courseware Design: Develop, update, and deliver tutorials, courseware, and Programs of Instruction (POIs) in a format that meets host country expectations. + Continuous Improvement: Recommend targeted updates to courses, SOPs, and training materials to improve efficiency. + SOP Management: Author and maintain a flight simulator training Standard Operating Procedure (SOP) governing qualifications. + Standards Alignment: Determine training objectives, scope, and criteria to meet U.S. Army and host nation standards. Maintenance, Logistics &amp; Facility Operations: + TADSS Inspections: Conduct pre-flight / post-flight simulator inspections, operational readiness checks, and maintenance test flights. + Equipment Troubleshooting: Assist with maintenance assessments and troubleshoot TADSS weapon simulation equipment. + Facility Infrastructure: Coordinate annual services for LCT HVAC and generator systems following OEM manuals. + Asset Accountability: Safeguard government and company property, materials, and training facilities. + Device Scheduling: Prepare simulator flight hour utilization and scheduling reports to maximize uptime. Program Administration &amp; International Relations: + Host Nation Liaison: Coordinate with host nation and FMS representatives to deconflict training and maintenance schedules. + VIP Engagement: Support host nation briefings, capability demonstrations, and VIP visits. + Cross-Cultural Communication: Communicate clearly with U.S., host nation, and contractor personnel. + Contractual Compliance: Ensure strict compliance with contract standards, specifications, and Quality Control (QC) requirements. + Customer Assistance: Deliver timely technical advice to a diverse, multi-national customer base. + Program Support: Execute additional mission tasks as directed by the V2X Program Manager. Qualifications Basic Qualifications: + Prior AH‑64E Instructor Pilot (IP) experience at company level or higher. + Trained and certified aviation educator with demonstrated AH‑64E instructional experience. + Strong understanding of U.S. Army Aircrew Training Manuals, aviation publications, and regulations. + Experience conducting simulator‑based training, evaluations, and check rides. + Proficiency in instrument flight, mission planning, emergency procedures, NVG operations, and tactical employment. + Strong English communication skills (verbal and written). Additional Required Qualifications: + Bachelors Degree + Graduate of the U.S. Army AH-64E Instructor Pilot and Methods of Instruction course + AH-64Ev6 qualification preferred. + Fundamentally computer literate to include (but not limited to) using a personal computer, performing word processing, performing database input, access electronic publications, accessing the world wide web, briefing and debriefing software, and filling out electronic forms and grade sheets. + Ability to support periodic travel. + Must be familiar with the operation of a military flight training base. + Strong communication and interpersonal skills are required. + Must be able to work overtime as required. + Must be able to wear appropriate Personal Protective Equipment (PPE) and lift a maximum of 50 pounds. Preferred Qualifications + Previous experience supporting Foreign Military Sales (FMS) or working with host‑nation air forces. + Prior experience the CENTCOM AOR, or similar overseas operating environments. + Experience developing SOPs, courseware, and POIs for aviation training. + Familiarity with FAA Order 7110.65 and ATC procedures as applied to simulator training. Working Environment: + 90% of the regular work environment is inside simulation facilities either onsite or a Point of Need (PoN) location wherever training is being conducted. + 10% of the regular work is within an office environment. + Must be able to meet requirements to obtain Work Permit and Residency Visa in Kuwait. + Must have a valid driver’s license and able to obtain an International Driver’s Permit. + Applicant may be required to travel and will be required to work in compliance with OSHA and V2X Safety policies and procedures. + Must possess a US Passport with at least 2 years of remaining eligibility. Physical Activities: + Physical activities include stooping, bending, lifting and/or carrying up to 50 lbs. + Must be able to wear appropriate Personal Protective Equipment (PPE). + Short periods of walking and standing for extended periods are likely. + Walk or stand on level and/or inclined surfaces up to 8-hours/day &amp; sit for up to 3 hours/day; climb/descend stairs; grasp or handle objects; use finger dexterity; bend elbows/knees; reach above/below shoulders; read/interpret typewritten print; communicate by voice &amp; detect sound by ear Clearance: Secret At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

Company Description Gradida is shaping the future of personalized education through an AI-powered platform that connects learners with experienced professionals across diverse industries. Gradida’s intelligent learning tools are designed to help people learn more efficiently, access specialized expertise, and advance their careers. By combining technology and human insight, Gradida aims to expand opportunities for learners in an increasingly knowledge-driven world.<br>Role Description The Business Development Specialist role at Gradida is a full-time, on-site position based in Kuwait City. In this role, the specialist identifies and nurtures new business opportunities, including partnerships with organizations, educational institutions, and industry experts. Day-to-day responsibilities include conducting market research, generating and qualifying leads, managing a pipeline of prospects, and presenting Gradida’s solutions to potential partners and clients. The specialist collaborates with internal teams to refine value propositions, support marketing initiatives, and contribute to revenue growth. They also maintain strong relationships with existing partners, provide responsive customer support, and ensure a high-quality experience for all stakeholders using the platform.<br>Qualifications Candidates should possess strong Analytical Skills and the ability to interpret data, identify trends, and make informed business decisions. Candidates should possess excellent Communication and Customer Service skills to build relationships, present solutions, and support partners and clients effectively. Candidates should possess Lead Generation and Market Research capabilities to identify prospects, understand market needs, and evaluate competitive landscapes. Candidates should possess basic proficiency with CRM tools and productivity software to manage pipelines, track activities, and document interactions. Relevant experience in business development, sales, or partnerships within tech, education, or Saa S environments is beneficial. A bachelor’s degree in Business, Marketing, Communications, or a related field is preferred. Ability to work on-site in Kuwait City and collaborate with cross-functional teams in a fast-paced, growth-oriented environment.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Position: Director of Office of Strategy, Institutional Performance &amp; Emerging Technology Classification: Director Level Reports To: President</p><p>The Office of Strategy, Institutional Performance &amp; Emerging Technology operates as a direct extension of the President's Office, serving as the institutional coordination and performance intelligence function that supports the execution of AIU's strategic priorities. Rather than functioning as a traditional planning department, the Office ensures that institutional strategy is translated into measurable outcomes through performance management, executive reporting, and strategic technology evaluation. The Office owns three interconnected responsibilities that together strengthen AIU's institutional effectiveness:</p><p>Strategy &amp; Institutional Performance: Leading the RISE Strategy execution cycle, institutional KPI monitoring, quarterly performance reporting, Board reporting, annual strategy review, and continuous improvement of AIU's institutional performance management framework using the Balanced Scorecard methodology.</p><p>Emergent Technology Intelligence: Scouting, evaluating, and piloting emerging technologies relevant to AIU's academic and administrative operations functioning as an innovation incubator that identifies what is ready for institutional adoption before the CIO integrates it at scale.</p><p>Strategic Project Alignment: Coordinating with the University's existing PMO and Special Projects structure to monitor the strategic alignment and progress of major institutional initiatives, ensuring the President receives timely updates on projects that materially affect strategic objectives.</p><p>The Director, Office of Strategy, Institutional Performance &amp; Emerging Technology carries three complementary mandates that reinforce one another. Institutional strategy provides direction, performance management measures progress, and emerging technology enables innovation that supports AIU's long-term strategic priorities. The Director ensures these three functions operate in alignment to support informed executive decision-making.</p><p><strong>Key Responsibilities</strong></p><p>1. RISE Strategy Execution and Balanced Scorecard Management</p><ul><li>Own the AIU RISE Strategy execution cycle translating Board-approved strategic objectives into annual operating plans, quarterly milestones, and individual VP and Dean accountability commitments</li><li>Design, maintain, and continuously improve AIU's Balanced Scorecard the institutional performance management framework that cascades RISE Strategy KPIs from institutional level through school, department, and individual levels ensuring that every function can see how its work connects to the strategy</li><li>Conduct quarterly strategy performance reviews with each VP reviewing KPI progress, identifying risks to delivery, proposing course corrections, and escalating material issues to the President with recommended responses</li><li>Prepare the Annual Strategic Progress Report the principal annual document presented to the Board of Trustees each November synthesizing Balanced Scorecard data, institutional KPI achievements, variance explanations, and the following year's adjusted priorities into a clear, evidence-based narrative for Board review</li><li>Manage the annual strategic planning calendar coordinating the February environmental scan, April-May VP planning submissions, June-July budget-strategy alignment, September Board approval, and November Board progress review ensuring that planning is a continuous cycle rather than an annual event</li><li>Maintain the RISE Strategy risk register identifying strategic risks, assessing likelihood and impact, tracking mitigation actions, and reporting to the President and Board Audit &amp; Risk Committee quarterly</li><li>Coordinate with the Institutional Research Office to ensure that all Balanced Scorecard data is sourced from verified institutional systems no KPI reported to the Board may be based on unverified or manually assembled data.</li></ul><p>2. Emergent Technology Intelligence and Innovation Piloting</p><ul><li>Lead AIU's horizon scanning function systematically monitoring emerging technologies relevant to higher education (generative AI, adaptive learning systems, learning analytics, spatial computing, research tools) and producing quarterly Technology Intelligence Briefings for the President and Senior Leadership Team</li><li>Design and manage AIU's innovation piloting programme a structured process for testing emerging technologies in controlled institutional environments before recommending them for full adoption. Pilots are time-bounded, evidence-evaluated, and documented for institutional learning regardless of outcome</li><li>Coordinate with the CIO to ensure that emergent technology intelligence flows effectively between the scouting function (this Office) and the operational integration function (CIO/Digital Transformation Office) the Director scouts and pilots; the CIO scales and operates</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Minimum Qualifications:</h2><p><strong>Education</strong></p><p>Doctoral degree required in Strategy, Higher Education Management, Business Administration (MBA), Public Administration, Project Management, or a closely related field. Candidates with strong GCC higher education strategic planning experience are strongly considered.</p><p><strong>Experience</strong></p><ul><li>Minimum eight (8) years of progressive experience in higher education, with at least four (4) years in a strategic planning, institutional effectiveness, or senior project management leadership role at a GCC university.</li><li>Demonstrated experience managing a university's strategic planning cycle from environmental scanning through KPI development, annual review, Board reporting, and plan revision in a GCC institutional context.</li><li>Proven experience implementing or managing a Balanced Scorecard or equivalent institutional performance management framework candidates must be able to describe a specific implementation, not just familiarity with the concept.</li><li>Experience working with institutional project portfolios and executive reporting, including monitoring strategic initiatives, interpreting project status information, and advising senior leadership on institutional priorities and risks</li><li>Direct experience working with or reporting to a university President or equivalent executive candidates must be comfortable advising at C-suite level, preparing Board-level documents, and maintaining professional discretion in a senior advisory role.</li><li>Experience with WASC or comparable institutional accreditation project management understanding how accreditation timelines translate into institutional project portfolios is a material advantage.</li></ul><p><strong>Technical and Analytical Knowledge</strong></p><ul><li>Proficiency with strategic planning and Balanced Scorecard frameworks candidates must demonstrate working knowledge of the BSC four-perspective model (financial, stakeholder, internal processes, learning &amp; growth) and its application in a higher education context.</li><li>Strong data analytics and visualization capability the Director must produce Balanced Scorecard dashboards and strategic performance reports that Board members with no higher education background can read and act on.</li><li>Project management methodology proficiency (Prince2, PMP, or equivalent). Working knowledge of project management methodologies sufficient to interpret project reporting, assess strategic risks, and support executive oversight of institutional initiatives. PMP certification is considered an advantage.</li><li>Technology literacy sufficient to evaluate emerging technologies at a strategic level the Director does not need to be a technologist, but must be literate enough to assess a vendor demonstration, understand integration implications, and ask the right questions of the CIO.</li><li>Familiarity with Kuwait's higher education regulatory environment PUC requirements, institutional governance obligations, and the competitive landscape of Kuwait's private university sector.</li></ul><p><strong>Skills, Competencies and Personal Attributes</strong></p><ul><li>The political intelligence to hold VPs and Deans accountable for RISE Strategy delivery without making accountability feel like surveillance the Director must be seen as a partner in execution, not an auditor of failure</li><li>Exceptional executive communication the ability to translate complex institutional performance data into a three-paragraph President's briefing, a ten-slide Board presentation, or a one-page project status update all with the same rigour and none of the same length</li><li>Strategic patience combined with operational awareness the ability to maintain a five-year strategic perspective while monitoring the progress, risks, and institutional impact of major strategic initiatives.</li><li>Cultural intelligence appropriate to AIU's multicultural GCC environment working effectively with Kuwaiti faculty, international administrators, owner Board members, PUC representatives, and WSCUC accreditation staff requires different registers and relationship norms.</li><li>Professional discretion at the highest level the Director has access to the most sensitive institutional information: financial projections, personnel decisions, accreditation risks, and Board deliberations. This access is a privilege that requires absolute confidentiality.</li></ul><h2>Preferred Qualifications:</h2><ul><li>PMP (Project Management Professional) certification. The formal credential is considered an advantage for interpreting project reporting and supporting executive oversight of institutional initiatives.</li><li>Experience with a university s WASC accreditation project portfolio, including sequencing of eligibility, self-study, SAV1, and SAV2 milestones as institutional activities with named owners and defined escalation paths.</li><li>Prior experience in a Chief of Staff or Strategy Director role in a GCC university. Candidates who have served as principal strategic advisors to a university President in the Gulf will have strong familiarity with institutional dynamics, stakeholder relationships, and cultural context.</li><li>Published research or professional contribution to strategic planning or institutional effectiveness in GCC higher education, demonstrating thought leadership rather than solely operational experience.</li><li>Arabic language proficiency is an advantage for engagement with Kuwaiti Board members, MOHE officials, and Arabic-speaking stakeholders.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION SUMMARY Ensure staff is working together as a team. Inspect grooming and attire of staff and rectify any deficiencies. Communicate with guests, other employees, or departments to ensure guest needs are met. Respond to and try to fulfill any special banquet event arrangements. Set up banquet area/room, ensuring cleanliness and proper set up of furniture/equipment. Inspect and maintain table set-ups for cleanliness, neatness and agreement with group requirements and company standards, and resolve any problems. Document pertinent information in appropriate department logbook. Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees. Develop and maintain positive working relationships with others, and support team to reach common goals. Follow all company and safety and security policies and procedures; report accidents, injuries, and unsafe work conditions to manager; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Speak with others using clear and professional language, and answer telephones using appropriate etiquette. Ensure adherence to quality expectations and standards. Read and visually verify information in a variety of formats (e.g., small print). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and objects weighing in excess of 75 pounds with assistance. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Education: High school diploma or G.E.D. equivalent.</li><li>Related Work Experience: At least 1 year of related work experience.</li><li>Supervisory Experience: At least 1 year of supervisory experience.</li><li>License or Certification: None</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Role Summary</b></p> <p>The Product Development Manager/Sr. Food Technologist leads technical product development across salty snacks portfolio — including chips, extruded snacks, and baked products. The role drives the innovation pipeline, ensuring that all products meet sensory, cost, and regulatory requirements while maintaining company reputation for quality and consumer appeal.</p> <p><b>Key Responsibilities</b></p> <p><b><span>A. Product Development &amp; Innovation</span></b></p> <ul> <li><span>Lead the formulation, bench development, and pilot-plant trials for new salty snack products.</span></li> <li><span>Work with Marketing to translate consumer insights into viable product concepts.</span></li> <li><span>Optimize formulations for cost, functionality, and sensory performance.</span></li> <li><span>Develop flavor and seasoning systems in partnership with suppliers.</span></li> <li><span>Coordinate sensory evaluations and shelf-life studies.</span></li> </ul> <p><b><span>B. Process Development</span></b></p> <ul> <li><span>Own the technical validation of new products on production lines (extruders, fryers, and dryers).</span></li> <li><span>Collaborate with Engineering on new equipment commissioning and process setup.</span></li> <li><span>Establish and document process parameters, standard operating procedures (SOPs), and line capability studies.</span></li> <li><span>Drive yield and oil absorption optimization.</span></li> </ul> <p><b><span>C. Cross-Functional Collaboration</span></b></p> <ul> <li><span>Partner with QA, Procurement, and Operations to ensure successful scale-up.</span></li> <li><span>Support Marketing in preparing product specifications, claims, and packaging validations.</span></li> <li><span>Liaise with supply chain and finance teams to cost models and margin targets.</span></li> </ul> <p><b><span>D. Continuous Improvement</span></b></p> <ul> <li><span>Analyze process data and implement improvements in product stability, quality, and efficiency.</span></li> <li><span>Benchmark KITCO's snack products against global competitors.</span></li> <li><span>Stay up to date on ingredient innovations, healthier oil alternatives, and flavor trends.</span></li> </ul> <p><b><span>E. Leadership &amp; Documentation</span></b></p> <ul> <li><span>Manage R&amp;D technologists or assistants assigned to snack development.</span></li> <li><span>Maintain full technical documentation: formulations, process sheets, trial reports, and product specifications.</span></li> <li><span>Ensure full compliance with Mezzan's HSE and Food Safety policies.</span></li> </ul> <p>&nbsp;</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul> <li><span>10-15 years' experience in savory snack manufacturing (extruded, pellet, and potato-based products).</span></li> <li><span>Proven track record of developing commercially successful products in regional or international snack companies.</span></li> <li><span>Strong understanding of formulation, processing, and frying systems (pellet frying, batch, and continuous lines).</span></li> <li><span>Capable of managing pilot trials, scale-up, and industrial validation in collaboration with operations and quality.</span></li> <li><span>Familiar with seasoning systems, oil management, shelf-life testing, and packaging interactions.</span></li> <li><span>Excellent project management and cross-functional coordination skills (Marketing, Procurement, QA, and Manufacturing).</span></li> <li><span>Ideally experienced with Middle East markets and consumer preferences.</span></li> </ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Please submit your CV in English and indicate your level of English proficiency.<br> Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems.<br> Participation is project-based, not permanent employment.<br> What this opportunity involves While each project involves unique tasks, contributors may: Evaluate AI-generated auto insurance claims decisions for accuracy, coverage correctness, and regulatory compliance; Design FNOL scenarios with deliberate contradictions, decoy files, and outdated documents to test agent robustness; Write and grade fraud-flagging scenarios using structured reason codes (late reporting, recently purchased policy, inconsistent damage) for SIU referral; Build subrogation test cases applying state-specific negligence rules (comparative vs.<br> contributory) and assess likelihood of recovery; Document test cases clearly with correct answers, policy citations, and payout calculations.<br> What we look for This opportunity is a good fit for professionals with a background in insurance claims, legal services, or broader financial services who are open to part-time, non-permanent projects.<br> Ideally, contributors will have: Degree in Insurance, Risk Management, Business Administration, Finance, Law, or any related field; 3+ years of insurance, claims, legal, or financial services experience; Current or recent experience in claims &amp; adjusting or adjacent roles; Familiarity with auto insurance coverage decisions, state-specific negligence rules, and adjuster authority-limit culture; AIC, CPCU, CIFI, or SCLA credential is a strong positive signal, though not required if hands-on experience is solid; Strong written English (C1+).<br> How it works Apply → Pass qualification(s) → Join a project → Complete tasks → Get paid Project time expectations For this project, tasks are estimated to require around 10–20 hours per week during active phases, based on project requirements.<br> This is an estimate, not a guaranteed workload, and applies only while the project is active.<br> Compensation On this project, contributors can earn up to $50 per hour equivalent , depending on their level and pace of contribution.<br> Compensation varies across projects depending on scope, complexity, and required expertise.<br> Please note that other projects on the platform may offer different earning levels based on their requirements.<br></span> </div>