Cost Estimating Engineer Jobs - Capital Governorate (Kuwait) Kuwait

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Serves as a senior-level satellite communications subject matter expert responsible for advanced installation, configuration, troubleshooting, and sustainment of complex SATCOM systems. Provides technical leadership and oversight for mission-critical communications infrastructure. Lead the installation, operation, maintenance, and troubleshooting of advanced satellite communications systems supporting voice, video, RF, and data networks.Design, configure, and optimize SATCOM solutions in accordance with mission and task-order requirements.Diagnose and resolve complex technical issues involving satellite terminals, modems, and RF systems.Provide technical leadership, mentorship, and oversight to junior technicians.Exercise independent judgment in resolving system-level issues and implementing corrective actions.Support coordination with vendors, engineers, and government stakeholders.Ensure compliance with all security, safety, and operational standards.Maintain detailed technical documentation and reporting for systems and activities.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must meet certification requirements specified in the applicable SPIN-C or individual task order.</li><li>Clearance: Secret</li><li>General Experience: 5+ years of hands-on experience supporting installation, maintenance, repair, and troubleshooting of communications systems.</li><li>Demonstrated ability to solve complex technical problems and understand interrelationships of communications circuits and systems.</li><li>Experience providing technical leadership and supervision.</li><li>Specialized Experience: Expert-level experience with DSCS or commercial satellite terminals, including: X-, C-, Ka-, Ku-band and Tri-band satellite terminals FDMA, TDMA, and IP-based satellite modems</li></ul><p></p></section>

<p>Role &amp; Responsibilities We are seeking experienced Service Engineers, Senior Service Technicians, and Service Technicians for a leading Industrial Service Company in Kuwait specializing in compressed air systems. The candidate should have hands-on experience in maintenance, troubleshooting, overhaul, installation, commissioning, and repair of oil-injected rotary screw air compressors and compressed air dryers.</p><p>Compressor Brands Experience (Any One or More)</p><ul><li>Atlas Copco</li><li>Ingersoll Rand</li><li>Gardner Denver</li><li>Kaeser</li><li>Sullair</li><li>CompAir</li><li>ELGi</li><li>Chicago Pneumatic</li><li>Quincy</li><li>BOGE</li><li>Other internationally recognized industrial compressor brands</li></ul><p>Key Responsibilities</p><ul><li>Preventive and corrective maintenance of rotary screw air compressors.</li><li>Troubleshooting mechanical and electrical faults.</li><li>Major overhaul of compressor packages.</li><li>Airend inspection, repair, and replacement.</li><li>Bearing replacement and mechanical seal replacement.</li><li>Motor replacement and alignment.</li><li>Coupling alignment using dial indicators or laser alignment tools.</li><li>Maintenance of belt-drive and direct-drive compressor systems.</li><li>Oil system and cooling system servicing.</li><li>Replacement of oil separators, oil filters, and air filters.</li><li>Inlet valve, blowdown valve, minimum pressure valve, and thermostatic valve overhaul.</li><li>Solenoid valve troubleshooting and replacement.</li><li>Leak detection and repair.</li><li>Installation and commissioning of compressors after overhaul.</li><li>Performance testing and fault diagnosis.</li><li>Preparation of service reports and customer support documentation.</li></ul><p>Electrical Responsibilities</p><ul><li>Troubleshooting industrial electric motors.</li><li>Working knowledge of Star-Delta starters.</li><li>Experience with Soft Starters.</li><li>Experience with VFD/VSD drives.</li><li>Electrical control panel troubleshooting.</li><li>PLC and electronic compressor controller diagnostics.</li><li>Pressure and temperature sensor troubleshooting.</li><li>Reading and understanding electrical wiring diagrams.</li><li>Electrical fault diagnosis using multimeters and clamp meters.</li></ul><p>Air Dryer Experience</p><ul><li>Refrigerated Air Dryers.</li><li>Heatless Desiccant Dryers.</li><li>Heated Desiccant Dryers.</li><li>Automatic Condensate Drain Systems.</li><li>Air Filtration Systems.</li><li>Moisture Separators.</li><li>Dew Point Controllers.</li></ul><p>Tools Knowledge</p><p>Candidates should be familiar with :</p><ul><li>Dial Indicators</li><li>Laser Alignment Tools</li><li>Torque Wrenches</li><li>Bearing Pullers</li><li>Hydraulic Presses</li><li>Multimeters</li><li>Clamp Meters</li><li>Megger (Insulation Resistance Tester)</li><li>Pressure Gauges</li><li>Infrared Temperature Guns</li><li>Vibration Meters</li></ul><p>Other Requirements</p><ul><li>Good communication skills in English.</li><li>Ability to work independently at customer sites.</li><li>Strong troubleshooting skills.</li><li>Safety-conscious and team-oriented attitude.</li><li>Valid Passport preferred.</li><li>Ready to relocate to Kuwait.</li></ul><p><strong>Desired Candidate Profile</strong></p><h3>Preferred Candidate Profile</h3><p>Qualification</p><ul><li>ITI Mechanical / Electrical</li><li>Diploma in Mechanical Engineering</li><li>Diploma in Electrical Engineering</li><li>Equivalent Technical Qualification</li></ul><p>Experience</p><ul><li>3 to 15 years of relevant experience in industrial air compressor service and maintenance.</li><li>Hands-on field service experience is mandatory.</li><li>Experience in shutdowns, commissioning, and troubleshooting preferred.</li><li>Gulf experience will be an added advantage.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><span >Your Responsibilities</span></p><ul><li>Provide back-office support to the Professional Services team through Roche Field Service solutions, including case creation and dispatching to assigned personnel</li><li>Collaborate with the Service Team Leader to prepare necessary documents and schedule instrument implementations with customers, manage preventive maintenance (PM) schedules, and upload PM reports for invoicing processes for public and private hospitals.</li><li>Manage spare parts by arranging courier services, overseeing spare part inventory, ordering, and collaborating with supply chain for order follow-ups.</li><li>Liaise with various teams to prepare and send necessary documents (urgent letters, site service reports, etc.) to field engineers.</li><li>Collaborate with business partners (e.g., water units, UPS, 3rd-party materials, lab renovation contractors) to track daily pending issues and manage reminders.</li><li>Daily monitoring and updating of internal systems cases for field engineers; open, dispatch, and follow up on cases through to closure.</li><li>Archive both hard and soft copies of service documents and maintain organized filing systems in the office and core map.</li><li>Manage document flow between Roche, and the customers, including contracts, proposals, quotations, and repair requests.</li><li>Control the numbering, sorting, filing, and retrieval of documents produced by the technical team or department to ensure accuracy and security.</li><li>Support the team with petty cash management, handling departmental expenses, and processing documents efficiently.</li></ul><p>Your Opportunity</p><ul><li>Participants build an extensive network within Roche and upskill themselves</li><li>Best possible work environment is designed to foster participants' learning experience</li><li>Participants will have access to senior leaders and will be assigned to a mentor to support their career journey</li><li>Contributing to purpose driven projects and taking responsibilities from day 1</li></ul><p>Who You Are</p><ul><li>You hold a Bachelor degree in Life Sciences, Economy, Business Administration, or any related area</li><li>You are at an early stage in your career. Fresh graduates will be preferred</li><li>Having a basic understanding of healthcare system is preferred</li><li>You are eager to work with diverse cultures</li><li>You are curious and have passion for learning new things, and have high degree of integrity and courage</li><li>You have excellent communication and innovative skills</li><li>You are proficient in English</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>You hold a Bachelor degree in Life Sciences, Economy, Business Administration, or any related area</p><p>You are at an early stage in your career. Fresh graduates will be preferred</p><p>Having a basic understanding of healthcare system is preferred</p><p>You are eager to work with diverse cultures</p><p>You are curious and have passion for learning new things, and have high degree of integrity and courage</p><p>You have excellent communication and innovative skills</p><p>You are proficient in English</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Reporting: VP Financial Accounting &amp; Reporting Location: Kuwait Industry: Real Estate Industry Key Responsibilities: Reviews all financial statements and manages accounts on a monthly basis after receiving from Subsidiaries / Associates. Follow up on all financial records of the subsidiaries, ensuring that they are accurately updated. Reviews with external Tax auditors for final approval Prepares the company consolidation and a Monthly Closing to ensure completeness of organized processes for the company and subsidiaries. In charge of the Tax declaration for the company Kuwait and local subsidiaries Gather information from subsidiaries for DMTT tax, ensuring accurate calculations and a thorough understanding of applicable regulations. Comprehend intercompany transactions by applying the transfer pricing policies and procedures. Ensures that all subsidiaries submit their tax declarations accurately, minimizing payments based on actual data, and meet all deadlines. Prepares the consolidated financial statements of the company in compliance with IFRS. Analyzes the monthly reporting of the consolidated financial statements. Assists in the development and enhancement of team procedure manuals and processes. Maintains collaborative and effective relationships with other key management personnel and keeping abreast of significant reporting, and regulatory guidelines. Actively participates in assigned Cross-Functional Teams (CFT) and ensures timely dissemination of information to CFT.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Kuwaiti National is a must Bachelor s degree in Finance or Accounting with equivalent years of experience Strong English and Arabic language skills (written and spoken) 6 8 years of relevant experience Significant experience in the real estate industry, and relevant experience tax / Consolidations.</p><p>Working Days / Timings: Sunday Thursday, 8:00 AM to 4:00 PM</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Summary: To efficiently perform installation &amp; commissioning of electrical installations within KDD in accordance with KDD as well as international standards and norms. Key Accountabilities: Ensure efficient execution of electrical installation, commissioning, testing, and validation activities in compliance with KDD and international standards. Deliver high-quality installation of electrical systems including LV/HV systems, control panels, fire alarm, network, and control wiring within project timelines. Maintain a safe, clean, and compliant working environment in accordance with HSE regulations of KDD and the State of Kuwait. Ensure accuracy and reliability in cable termination, tray installation, field wiring, and panel assembly activities. Support smooth project execution through effective coordination with project teams and other technical disciplines. Ensure all assigned tasks are completed as per management instructions and operational requirements. Roles &amp; Responsibilities: Perform electrical installation, commissioning, testing, and validation of control panels and electrical systems. Carry out cable tray installation, cable routing, termination, and field wiring for LV, HV, fire alarm (FA), network, and control systems. Assemble, install, and assist in commissioning electrical and control panel boards as per project specifications. Read and interpret electrical drawings, schematics, and technical documentation for proper execution of work. Maintain tools, equipment, and work areas in a safe and organized condition. Coordinate with engineers, supervisors, and other technicians to ensure timely completion of project activities. Adhere strictly to HSE policies, safety procedures, and quality standards at all times. Provide technical support to team members and assist in resolving site-related electrical issues when required. Follow all management instructions and support operational requirements as needed.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education Diploma / ITI in Electrical domain. Professional experience (years) 15+. Professional background Basic knowledge of MS office programs-Proficient Knowledge of HV, LV, FA &amp; Control Systems Installation &amp; Testing.</p><p></p></section>

<p>The role is responsible for achieving <strong>KD 400,000 annual enterprise revenue</strong> by driving <strong>Sales and Pre-Sales activities</strong> across <strong>Lenovo infrastructure, Microsoft cloud &amp; licensing, and Cybersecurity solutions</strong>.</p><p>The position plays a key role in establishing and scaling <strong>WITS’ Enterprise business in Kuwait</strong>, operating within a <strong>basic reseller ecosystem</strong> and competing against established Gold/Premium partners.</p><p>&nbsp;</p><p><strong>Key Responsibilities</strong></p><ul><li>Own the <strong>end-to-end enterprise sales lifecycle</strong> aligned with monthly, quarterly, and annual KPIs.</li><li>Build and manage a <strong>qualified enterprise pipeline</strong> across Government, Oil &amp; Gas, FSI, Healthcare, Education, and corporate sectors.</li><li>Lead <strong>RFP/RFQ/RFI responses</strong>, including requirement analysis, solution design, BOM, compliance, and pricing.</li><li>Position and sell:<ul><li><strong>Lenovo:</strong> Servers, storage, HCI, data centre infrastructure</li><li><strong>Microsoft:</strong> Licensing, Azure, M365, cloud migration</li><li><strong>Cybersecurity:</strong> SOC/MSSP, network, endpoint, and cloud security</li></ul></li><li>Conduct <strong>customer presentations, demos, and technical discussions</strong> to support deal closure.</li><li>Work closely with distributors and OEMs for <strong>deal registration, pricing support, and forecasts</strong>.</li><li>Maintain <strong>accurate weekly pipeline reporting and revenue forecasting</strong> as per KPI template.</li></ul><p>30–60–90 Day Execution Plan</p><p>First 30 Days – Foundation</p><ul><li>Complete onboarding on <strong>WITS offerings, pricing models, and KPI reporting</strong>.</li><li>Align with <strong>Lenovo, Microsoft, and Cybersecurity distributors/OEMs</strong>.</li><li>Identify and map <strong>top 20–30 target enterprise accounts</strong> and decision-makers.</li><li>Build an initial <strong>pipeline covering at least 1.5x of quarterly target</strong>.</li><li>Initiate customer meetings and capability presentations.</li></ul><p><strong>60 Days – Pipeline Expansion</strong></p><ul><li>Grow pipeline to <strong>2.5x–3x of quarterly target</strong>.</li><li>Actively engage in <strong>RFPs, RFQs, and technical workshops</strong>.</li><li>Submit qualified proposals and <strong>register deals</strong> with distributors/OEMs.</li><li>Advance opportunities to mid/late pipeline stages.</li></ul><p><strong>90 Days – Revenue Delivery</strong></p><ul><li>Achieve <strong>first closed-won enterprise deals</strong> aligned with KPI expectations.</li><li>Establish <strong>WITS visibility</strong> with key enterprise customers and partners.</li><li>Maintain a sustainable <strong>3x–4x pipeline</strong> for upcoming quarters.</li><li>Present a <strong>rolling 6–9-month revenue and account expansion plan</strong>.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for a motivated and creative Junior Landscape Designer to join our growing team. The successful candidate will support the design department by preparing landscape concepts, technical drawings, 3D visualizations, and presentation materials for residential and commercial landscape projects. The ideal candidate is passionate about landscape design, has a strong eye for detail, is eager to learn, and is comfortable using modern design technologies, including AI tools, to improve productivity and design quality.</p><p>Key Responsibilities:</p><ul><li>Prepare landscape concept designs and detailed landscape plans.</li><li>Produce accurate AutoCAD drawings and construction details.</li><li>Create high-quality 3D models using SketchUp.</li><li>Produce realistic renderings and animations using Lumion.</li><li>Prepare presentation boards using Photoshop.</li><li>Assist with plant selection, hardscape materials, and outdoor furniture layouts.</li><li>Coordinate with senior designers and project engineers during design development.</li><li>Revise drawings based on client and management feedback.</li><li>Attend site visits when required to verify site conditions and support project execution.</li><li>Maintain organized project files and documentation.</li><li>Utilize AI tools to improve design workflows, visualization, productivity, and presentation quality.</li><li>Experience using AI tools for design, visualization, image enhancement, presentations, or workflow automation.</li></ul><p>Software Skills:</p><ul><li>AutoCAD</li><li>SketchUp</li><li>Lumion</li><li>Adobe Photoshop</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s degree in Landscape Architecture, Architecture, or a related field</li><li>1 3 years of experience in landscape design</li><li>Experience working in the GCC is highly preferred</li><li>Experience using AI tools for design, visualization, image enhancement, presentations, or workflow automation</li><li>Indian nationals preferred</li><li>We are open to hire from GCC &amp; India.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> </p> <p> We are seeking a highly capable and technically grounded Technical Delivery Lead to guide and coordinate a cross-functional software engineering team building advanced digital solutions for the oilfield domain. This role combines technical leadership, solution architecture, and delivery oversight across backend, frontend, DevOps, QA, and datacentric development. </p> <br> <ul> <li> Strong experience in backend development (Java, Spring Boot preferred) and solid understanding of microservice architectures. </li> <li> Strong Experience with frontend architectures (Angular, modular SPAs, TypeScript) and integration points. </li> </ul> <br> <p> The ideal candidate has deep hands-on experience in software engineering (especially backend or systems design) and is skilled at mentoring senior developers, setting standards, and delivering high-quality, enterprise-grade applications in cloud-native and domain-heavy environments. Experience in the oil &amp; gas digital space is a strong advantage. </p> <br> <p> <b>Key Respo</b>nsibilities: </p> <ul> <li> Own the technical delivery of complex software products that integrate backend services, frontend interfaces, testing, and cloud infrastructure. </li> <li> Provide technical leadership and architectural guidance across backend, frontend, QA, and DevOps workstreams. </li> <li> Facilitate collaboration between developers, testers, DevOps engineers, and domain SMEs to ensure cohesive, end-to-end solutions. </li> <li> Work with product managers and business stakeholders to translate requirements into technical plans, stories, and release roadmaps. </li> <li> Ensure adherence to best practices in code quality, security, performance, observability, and maintainability. </li> <li> Guide architectural decisions related to scalability, modularity, cloud cost optimization, and data flow. </li> <li> Review code and architecture contributions and mentor team members to elevate technical capabilities across the board. </li> <li> Drive continuous integration, deployment, and automation efforts alongside </li> <li> DevOps to streamline release pipelines. </li> <li> Help resolve technical blockers and maintain momentum across active sprints and project phases. </li> <li> Champion quality engineering practices, including unit/integration testing and automated test coverage. </li> </ul> <br> <p> <b>Required Skills and Experience:</b> </p> <ul> <li> 10+ years of software engineering experience, with at least 3 years in a technical or team leadership role. </li> <li> Strong experience in backend development (Java, Spring Boot preferred) and solid understanding of microservice architectures. </li> <li> Familiarity with frontend architectures (Angular, modular SPAs, TypeScript) and integration points. </li> <li> Deep understanding of CI/CD, DevOps tooling (GitLab CI, Docker, Kubernetes, Terraform). </li> <li> Hands-on experience leading cross-functional agile teams and delivering enterprise-scale softwareproducts. </li> <li> Strong knowledge of cloud-native development, preferably on Azure. </li> <li> Proficient in system and application architecture, integration design, and service scalability patterns. </li> <li> Understanding of QA methodologies, test automation, and performance testing frameworks. </li> </ul> <br> <p> <b>Nice to Have:</b> </p> <ul> <li> Background in Digital Oilfield (DOF), upstream workflows, or related oil &amp; gas engineering software </li> <li> Domains. </li> <li> Experience integrating or supporting ML/AI features or intelligent automation in software systems. </li> <li> Familiarity with event-driven systems and real-time data integration. </li> <li> Exposure to agentic AI design or AI augmentation of engineering workflows is a plus. </li> </ul></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Architecture &amp; Development: Architect, develop, and maintain robust, scalable, and secure front-end applications using Angular (latest versions). Data Visualization: Build high-performance dashboards capable of handling real-time, high-frequency data streams, time-series data, and complex industrial charting. Technical Leadership: Mentoring junior/mid-level developers, establishing front-end coding standards, conducting rigorous code reviews, and driving UI/UX best practices. Collaboration: Work closely with product managers, data scientists, backend engineers, and industrial domain experts to translate complex operational requirements into clean interfaces. Performance Optimization: Optimize application performance for maximum speed, scalability, and seamless rendering of massive datasets. Modernization: Drive the migration of legacy front-end systems into modern, modular Angular architectures (e.g., Micro-frontends, Monorepos).</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum of 10+ years of professional software development experience, with a strict focus on front-end technologies.</li><li>Angular Expertise: 6+ years of deep, hands-on experience with Angular (including RxJS, NgRx/state management, Angular CLI, and standalone components).</li><li>Core Web Tech: Mastery of JavaScript (ES6+), TypeScript, HTML5, and advanced CSS/SASS.</li><li>Testing &amp; CI/CD: Strong experience with front-end testing frameworks (Jest, Cypress, Karma) and integrating front-end builds into CI/CD pipelines.</li><li>Data &amp; APIs: Proficient in consuming complex RESTful APIs and WebSocket connections for real-time data streaming.</li><li>Good communication with English</li><li>Good problem-solving skills</li><li>Good documentation skills</li><li>Flexible to travel to Kuwait</li><li>Experience working as oil and gas domain is preferred</li><li>Landmark Business Domain is preferred</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Our client in Kuwait is seeking an experienced Sourcing Specialist to join their Supply Chain Division on a permanent basis . The successful candidate will be responsible for identifying and developing reliable local and international suppliers, supporting sourcing strategies, conducting commercial analysis, and assisting procurement activities to ensure cost-effective and reliable supply solutions. Key Responsibilities Identify, evaluate, and develop qualified suppliers. Support supplier prequalification, commercial evaluations, and vendor performance tracking. Conduct pricing analysis, supplier benchmarking, and market research. Support procurement negotiations through commercial insights and supplier intelligence. Maintain sourcing databases and procurement documentation. Collaborate with internal stakeholders to support sourcing decisions and business continuity. Benefit of Working with Visuna? A dedicated member of the team responsible for your placements and welfare Some of the best day rates in the industry FREE worldwide insurance and Medevac cover whist on a Placement 24/7 access to our specialist support team Assistance and advice on a range of business topics FREE access to our Competency Scheme Increased exposure to potential clients and more placement opportunities Share:</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s degree in Supply Chain Management, Business Administration, Engineering, Chemistry, Industrial Management, or related field.</li><li>4 7 years experience in sourcing, procurement, vendor development, or supply chain.</li><li>Experience in oil &amp; gas, manufacturing, chemicals, industrial materials, or technical procurement is preferred.</li><li>Strong knowledge of supplier sourcing, prequalification, and commercial evaluation.</li><li>Proficiency in Microsoft Excel; ERP/procurement system experience is an advantage.</li><li>Strong analytical, organizational, and communication skills with high attention to detail and integrity.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Rig Manager Deep Drilling We are currently looking for a Rig Manager Deep Drilling Land Rigs (3000 HP / HPHT) to join our client's operations in Kuwait. Position Overview: The Rig Manager Deep Drilling will be responsible for the safe, efficient, and cost-effective execution of drilling operations on deep drilling land rigs in Kuwait. The role will provide overall leadership for rig operations, ensuring operational excellence, equipment reliability, and compliance with company and regulatory requirements. Key Responsibilities: Rig Operations: Direct and oversee all drilling and rig operations to ensure safe and efficient execution. Ensure drilling activities are performed in accordance with approved drilling programs and operational procedures. Monitor rig performance and optimize operational efficiency while minimizing non-productive time (NPT). Coordinate daily drilling activities with Drilling Superintendents and onshore support teams. Ensure proper well control practices are maintained at all times. Operational Excellence: Drive continuous improvement initiatives to enhance drilling performance and equipment utilization. Monitor operational KPIs and implement corrective actions when required. Coordinate with maintenance teams to ensure timely repairs and preventive maintenance activities. Compliance &amp; Safety: Ensure compliance with company HSE policies, industry standards, and regulatory requirements. Promote a strong safety culture and ensure adherence to well control procedures. Lead incident investigations and implement corrective actions. Participate in audits, inspections, and emergency response activities. Leadership: Lead and supervise all rig personnel and contractors on site. Mentor and develop crew competency through training and coaching. Coordinate with Toolpushers, Drilling Engineers, service companies, and contractors. Foster effective collaboration within multicultural work environments.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's Degree or Technical Diploma in Petroleum, Mechanical Engineering, or related discipline.</li><li>Minimum 8+ years of drilling rig operations experience.</li><li>At least 3 years in a Rig Manager, Senior Toolpusher, or equivalent leadership role.</li><li>Extensive experience supporting deep drilling land rigs (3000HP, HPHT, and complex drilling operations).</li><li>Strong understanding of drilling operations, well control, and rig equipment.</li><li>Current IWCF or IADC WellSharp certification is preferred.</li><li>Excellent communication and leadership skills in English.</li><li>Candidates from Canada, United States, Europe, Eastern Europe, Australia, China are preferred.</li></ul><p></p></section>

<p><h4>Job Description</h4> <p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Conduct the training and examination on all NDT methods to certify and to re-certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.</p> <p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p> <p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p> <p>Establish radiation areas for radiographic operations.</p> <p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p> <p>Perform nondestructive inspection on structures, components, and systems.</p> <p>Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p> <p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p> <p>Operate, maintain, and inspect nondestructive equipment.</p> <p>Perform operator maintenance and service inspections on shop equipment and tools.</p> <p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p> <p>Perform silver recovery functions.</p> <p>Handle and dispose of hazardous waste and materials.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum Requirements:</h4> <ul> <li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li> <li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li> <li>Three (3) years’ experience as a Non Destructive Inspection (NDI).</li> <li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/DIDC Training).</li> <li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li> </ul> <h4>Security Clearance Requirements:</h4> <ul> <li>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance.</li> <li>Must be able to obtain and maintain facility credentials/authorization.</li> <li>US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li> </ul> <h4>Additional and Preferred Qualifications:</h4> <ul> <li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li> <li>Capable of assuming technical responsibility for the NDT facility and staff.</li> <li>Capable of selecting the method and technique for a specific inspection.</li> <li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li> <li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li> <li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical Requirements/Working Environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Conduct the training and examination on all NDT methods to certify and to re-certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.</p> <p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p> <p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p> <p>Establish radiation areas for radiographic operations.</p> <p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p> <p>Perform nondestructive inspection on structures, components, and systems.</p> <p>Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p> <p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p> <p>Operate, maintain, and inspect nondestructive equipment.</p> <p>Perform operator maintenance and service inspections on shop equipment and tools.</p> <p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p> <p>Perform silver recovery functions.</p> <p>Handle and dispose of hazardous waste and materials.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum requirements</h4> <p>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</p> <p>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</p> <p>Three (3) years’ experience as a Non Destructive Inspection (NDI).</p> <p>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/DIDC Training).</p> <h4>Security clearance requirements</h4> <p>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a clearance and for facility credentials/authorization to work at this facility.</p> <h4>Additional and preferred qualifications</h4> <ul> <li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li> <li>Capable of assuming technical responsibility for the NDT facility and staff.</li> <li>Capable of selecting the method and technique for a specific inspection.</li> <li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li> <li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li> <li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis. Conduct the training and examination on all NDT methods to certify and to re- certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189. Determine test method and prepare fluids and parts for nondestructive inspection. Interpret nondestructive inspection test results and provide information about defects to repair center. Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action. Establish radiation areas for radiographic operations. Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data. Perform nondestructive inspection on structures, components, and systems. Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment. Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors. Operate, maintain, and inspect nondestructive equipment. Perform operator maintenance and service inspections on shop equipment and tools. Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment. Perform silver recovery functions. Handle and dispose of hazardous waste and materials Perform other qualified duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li><li>Three (3) years experience as a Non Destructive Inspection (NDI).</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li><li>Capable of assuming technical responsibility for the NDT facility and staff.</li><li>Capable of selecting the method and technique for a specific inspection.</li><li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li><li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li><li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p><p>• Conduct the training and examination on all NDT methods to certify and to re- certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p><p>• Determine test method and prepare fluids and parts for nondestructive inspection.</p><p>• Interpret nondestructive inspection test results and provide information about defects to repair center.</p><p>• Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p><p>• Establish radiation areas for radiographic operations.</p><p>• Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p><p>• Perform nondestructive inspection on structures, components, and systems.</p><p>• Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p><p>• Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p><p>• Operate, maintain, and inspect nondestructive equipment.</p><p>• Perform operator maintenance and service inspections on shop equipment and tools.</p><p>• Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p><p>• Perform silver recovery functions.</p><p>• Handle and dispose of hazardous waste and materials</p><p>• Perform other qualified duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li><li>Three (3) years experience as a Non Destructive Inspection (NDI).</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li><li>Capable of assuming technical responsibility for the NDT facility and staff.</li><li>Capable of selecting the method and technique for a specific inspection.</li><li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li><li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li><li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an Electrical Maintenance Manager - Residential for our client in Kuwait. Position Overview: The Electrical Maintenance Manager is responsible for planning, directing, and managing all electrical maintenance activities for a fleet of onshore drilling rigs and associated equipment. Key Responsibilities: Maintenance Management: Develop, implement, and continuously improve preventive, predictive, and corrective electrical maintenance programs for land drilling rigs. Ensure maximum reliability and availability of drilling electrical systems and associated equipment. Plan and supervise major electrical overhauls, rig upgrades, and refurbishment projects. Review equipment performance and implement reliability improvement initiatives. Monitor equipment failures and perform root cause failure analysis (RCFA) to eliminate recurring issues. Ensure maintenance activities comply with OEM recommendations and industry best practices. Fleet Support: Provide technical support to multiple onshore drilling rigs. Coordinate troubleshooting of complex electrical failures affecting drilling operations. Monitor rig electrical KPIs including equipment availability, MTBF, MTTR, and maintenance compliance. Conduct periodic inspections and audits of rig electrical systems. Standardize maintenance procedures across the drilling fleet. Equipments: Responsible for electrical maintenance of: SCR and AC/VFD drilling rigs, Rig power generation systems, Diesel generators, Motor Control Centers (MCC), Variable Frequency Drives (VFD), Silicon Controlled Rectifier (SCR) systems, Top Drive electrical systems, Drawworks electrical systems, Mud pump electrical systems, Rotary equipment, Air compressors, Lighting systems, Rig camp electrical distribution systems, High and low voltage distribution systems, UPS systems, PLC and control systems, Instrumentation interfaces, Emergency shutdown systems, Rig communication systems, Electrical protection systems. Planning &amp; Asset Management: Develop annual electrical maintenance plans and budgets. Manage spare parts inventory and critical electrical components. Coordinate procurement of electrical materials and services. Optimize maintenance costs while maintaining equipment reliability. Maintain accurate maintenance records using a Computerized Maintenance Management System (CMMS). Leadership: Lead, mentor, and supervise Electrical Superintendents, Electrical Supervisors, Electrical Engineers, and field electricians. Allocate manpower effectively across multiple drilling rigs. Conduct performance evaluations and competency assessments. Identify training needs and develop technical competency programs. HSE &amp; Compliance: Ensure compliance with company HSE policies and client requirements. Promote a strong electrical safety culture. Ensure compliance with: Lock Out/Tag Out (LOTO) Electrical isolation procedures Permit to Work (PTW) Hazard identification and risk assessment Safe electrical work practices Participate in incident investigations and implement corrective actions. Ensure compliance with applicable electrical codes and standards. Quality &amp; Continuous Improvement: Develop and update electrical maintenance procedures. Conduct reliability analysis and continuous improvement initiatives. Evaluate new technologies to improve drilling equipment reliability. Support rig commissioning, acceptance testing, and startup activities.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>Qualifications:</b></p><p>Bachelor's Degree in Electrical Engineering or equivalent. Professional certifications in electrical engineering or maintenance management are advantageous. Experience of 8+ years of electrical maintenance experience in the oil and gas drilling industry with minimum 5 years in a managerial or superintendent-level position. Candidates from Canada, United States, Europe, Eastern Europe, Australia, China are preferred. Experience managing electrical maintenance across multiple drilling rigs. Strong knowledge of AC and SCR drilling rig electrical systems. Experience working in GCC/Middle East drilling operations is highly desirable.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Title: Solution Engineering Manager Siemens Grid Software Location: Kuwait City, Kuwait About the role: This is a senior leadership role at the intersection of engineering excellence and regional energy transformation. As Solution Engineering Manager, you will be the driving force behind the technical delivery of Siemens Grid Software portfolio overseeing multidisciplinary teams and managing a portfolio of high-impact infrastructure projects that directly support national agendas, including Kuwait Vision and broader grid modernization programs. Key Responsibilities Lead end-to-end technical execution of Grid Software projects in Kuwait, ensuring delivery on time, within scope, budget, and quality standards Define project objectives, technical scope, resource allocation, and delivery strategies in collaboration with key stakeholders Drive engineering best practices through the reuse of standard components, templates, and proven delivery frameworks Ensure full compliance with Siemens architectural standards, technical governance, cybersecurity requirements, and EHS policies Represent Siemens in senior-level engagements with government entities, utilities, EPC contractors, and strategic partners Support pre-sales activities, strategic customer engagements, and long-term account retention initiatives Contribute to regional go-to-market strategy and business development planning in alignment with sales and regional management Build and maintain trusted relationships with customers, partners, vendors, and internal stakeholders at all levels Lead and coordinate internal engineering resources, project managers, lifecycle teams, and third-party vendors across geographically distributed teams Coach and develop Technical Project Leads, Engineers, and delivery teams fostering a high-performance, collaborative culture Monitor project performance through robust reporting, scheduling, and quality management mechanism Identify, manage, and resolve technical risks, bottlenecks, and escalation topics throughout the project lifecycle Oversee budget accountability and P&amp;L contribution for the territory's engineering portfolio Lead operational improvement initiatives and support business transformation programs within the territory Manage scope, schedule, and cost changes using structured governance and changing control processes Collaborate with global component teams to ensure alignment with Siemens' architectural and delivery standards</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Your Profile Bachelor s degree in electrical engineering, Electronic Engineering, Telecommunications, Computer Science, IT, or a related technical discipline 10 15 years of progressive experience in project execution and engineering leadership, with a focus on medium to large-scale infrastructure or Grid Software projects Proven track record leading multicultural, multidisciplinary engineering and project management teams in international environments Strong background in the Transmission and Distribution sector, with expertise in SCADA systems, IT/OT integration, digitalization, IoT, and cybersecurity Deep technical knowledge of Substation Automation and Telecommunication Systems, including familiarity with Siemens and competitor solutions Experience managing matrix organizations and navigating complex, multi-stakeholder project environments Experience working within Kuwait or broader markets is strongly preferred Established network and familiarity with Kuwait utilities, transmission operators, or government entities is a distinct advantage Understanding of regional regulatory, procurement, and project delivery frameworks in Kuwait and in the Gulf Exceptional communication, stakeholder management, negotiation, and executive presentation skills Demonstrated passion for developing people, coaching technical teams, and building high-performance cultures Strong commercial acumen with solid understanding of project controlling, scheduling, and corrective action frameworks Fluent in English (written and spoken) while Arabic language is highly advantageous</p><p></p></section>