Ship Mechanic Jobs

<p><h4>Job Description</h4> <p>The C-12/King Air Army Transport Aircraft Mechanic (FAA A&P) services, repairs, and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components.</p> <p>A valid (FAA) A&P Airframe and Powerplant Certificate is required.</p> <p>Seven (7) years’ experience as an (A&P) mechanic with seven (7) years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</p> <p>US citizenship is required to obtain a US government secret security clearance and for facility access.</p> <p>Operationally checks repaired or modified systems for proper operation.</p> <p>Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment.</p> <p>Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</p> <p>Examine engines for oil leaks and listen to operating engines to detect and diagnose malfunctions. Inspect turbine blades to detect cracks or breaks.</p> <p>Test engine operation, using troubleshooting procedures and diagnostic test equipment, to identify source of malfunction.</p> <p>Replace or repair worn or damaged components using hand tools, gauges, and test equipment. Remove and install engine from aircraft.</p> <p>Disassemble and inspect parts for wear, warping, or other defects.</p> <p>Repair or replace defective engine parts and reassemble and install engine in aircraft.</p> <p>Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.</p> <p>May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition.</p> <p>Knowledge of aircraft sub-systems, including maintenance parameters, systems operation, limitations, and technical orders.</p> <p>Ability to become qualified and perform engine runs for the aircraft type they are assigned to support.</p> <p>Ability to read, write, and interpret technical duties is required.</p> <p>Ability to communicate effectively with all levels of employees throughout the organization.</p> <p>May specialize in work, repair, and modification of structural, precision, and functional spare parts and assemblies.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum Requirements</h4> <ul> <li>High school diploma or GED equivalent is required.</li> <li>A valid (FAA) A&P Certificate is required.</li> <li>Seven (7) years’ experience as an (A&P) mechanic with seven (7) years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</li> <li>Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</li> <li>Recent full-time experience in aviation maintenance on the C-12/King Air turbo-prop aircraft during the past 12 months is required.</li> <li>Six (6) months of flight line and overhaul & inspection experience is preferred.</li> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li> <li>Mechanic tools/toolbox required; mechanics must provide their own shadowed toolbox with each tool etched with PID.</li> <li>A valid US passport is required for deployment/travel to Kuwait; passport must have a minimum of 18 months remaining before expiration date and must be able to obtain Kuwait visa.</li> <li>Must be able to pass and clear CENTCOM (CRC) deployment training and Army MOD17 medical for deployment. Ability to clear the Army MOD 17 medical is required for deployment to Kuwait and will occur while attending CRC (DIDC) deployment training.</li> <li>May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations.</li> </ul> <h4>Mechanic Pre-employment Medical Requirements (AR95-20)</h4> <p>Medical/Physical: All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed five (5) years.</p> <h4>Security Clearance Requirements</h4> <p>Must be able to obtain and maintain a US government secret security clearance. Must be able to obtain and maintain facility credentials and authorization. US citizenship is required to hold a US government secret clearance and facility credentials and authorization to work at this facility.</p> <h4>Physical and Additional Qualifications</h4> <ul> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to carry, push, or pull up to and may exceed 50 pounds.</li> <li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of seven feet.</li> <li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Must be able to distinguish color and judge three-dimensional depths.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li> <li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li> <li>Must be capable of living and working in a potentially hostile environment for an extended period.</li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> </ul> <h4>Compensation Details</h4> <p>41.89</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits Overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a Collective Bargaining Agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional Information</h4> <p>Original Posting: 06/05/2026 - Until Filled</p> <p>The company anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>The company is proud to be an Equal Opportunity Employer. Hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Job summary</h4> <p>The C-12/King Air Army transport aircraft mechanic (FAA A&P) services, repairs, and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components.</p> <h4>Requirements</h4> <p>A valid FAA A&P Airframe and Powerplant certificate is required.</p> <p>Seven years’ experience as an A&P mechanic with seven years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</p> <p>US citizenship is required to obtain a US government secret security clearance and for facility access.</p> <h4>Responsibilities</h4> <ul> <li>Operationally check repaired or modified systems for proper operation.</li> <li>Repair and replace aircraft structures such as wings and fuselage, and functional components including rigging, surface controls, plumbing, and hydraulic units using hand tools, power tools, machines, and associated equipment.</li> <li>Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</li> <li>Examine engines for oil leaks and listen to operating engines to detect and diagnose malfunctions.</li> <li>Inspect turbine blades to detect cracks or breaks.</li> <li>Test engine operation using troubleshooting procedures and diagnostic test equipment to identify the source of malfunction.</li> <li>Replace or repair worn or damaged components using hand tools, gauges, and test equipment.</li> <li>Remove and install engines from aircraft.</li> <li>Disassemble and inspect parts for wear, warping, or other defects.</li> <li>Repair or replace defective engine parts and reassemble and install engines in aircraft.</li> <li>Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.</li> <li>May service engines and airframe components at line stations making repairs short of overhaul required to keep aircraft in safe operating condition.</li> <li>Maintain knowledge of aircraft sub-systems, including maintenance parameters, systems operation, limitations, and technical orders.</li> <li>Ability to become qualified and perform engine runs for the aircraft type assigned to support.</li> <li>Ability to read, write, and interpret technical duties is required.</li> <li>Ability to communicate effectively with all levels of employees throughout the organization.</li> <li>May specialize in work, repair, and modification of structural, precision, and functional spare parts and assemblies.</li> <li>Perform other qualified duties as assigned.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>High school diploma or GED equivalent is required.</li> <li>A valid FAA A&P certificate is required.</li> <li>Seven years’ experience as an A&P mechanic with seven years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</li> <li>Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate US government armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</li> <li>Recent full-time experience in aviation maintenance on the C-12/King Air turbo-prop aircraft during the past 12 months is required.</li> <li>Six months of flight line and overhaul and inspection experience is preferred.</li> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft-specific specifications for weight limit.</li> <li>Mechanic tools and toolbox required; mechanics must provide their own shadowed toolbox with each tool etched with PID.</li> <li>A valid US passport is required for deployment and travel; passport must have a minimum of 18 months remaining before expiration and must be able to obtain required visas.</li> <li>Must be able to pass and clear CENTCOM (CRC) deployment training and Army MOD17 medical for deployment.</li> <li>May be required to travel to and between remote locations in austere and/or hostile environments in support of mission operations.</li> <li>Mechanic pre-employment medical requirements: all personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within ten feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations and subsequently on a specified periodic basis not to exceed five years.</li> <li>Security clearance requirements: must be able to obtain and maintain a US government secret security clearance and facility credentials and authorization. US citizenship is required.</li> </ul> <h4>Physical and additional qualifications</h4> <ul> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft-specific specifications for weight limit.</li> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above and below shoulders.</li> <li>May be required to carry, push, or pull up to and may exceed 50 pounds.</li> <li>May be required to lift up to 50 pounds to a height of four feet and up to 35 pounds to a height of seven feet.</li> <li>May be required to see aircraft in flight, read dials and gauges, identify small objects and hand tools.</li> <li>Must be able to type using a standard keyboard to communicate through email and various software applications.</li> <li>Must be able to distinguish color and judge three-dimensional depths.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li> <li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li> <li>Must be capable of living and working in a potentially hostile environment for an extended period.</li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> </ul> <h4>Compensation details</h4> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits including 401(k) matching</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement, the McNamara-O'Hara Service Contract Act, or other employment contracts may include different provisions and benefits.</p> <h4>Additional information</h4> <p>Original posting date: 06/10/2026 - until filled.</p> <p>The company anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <h4>Equal opportunity employer statement</h4> <p>The company is proud to be an equal opportunity employer. Hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>All candidates shall possess the required technical competence, relevant qualifications, and practical experience to perform their assigned duties efficiently.</p><p><br></p><ol><li>OO Experience in Operation and Maintenance of Sewage Pumping Stations.</li><li>OO Minimum 3 years</li></ol><p><br></p><p><br></p><p>/ REQUIRED POSITIONS /</p><p><br></p><ol><li>OO Electrical Engineer</li><li>OO Mechanical Engineer</li><li>OO Instrumentation Engineer</li><li>OO Safety Engineer</li><li>OO Scada Operator</li><li>OO Lift Operator</li><li>OO AC Technician</li><li>OO Pumping Station Operator</li><li>OO Electrician </li><li> OO Mechanic</li><li> OO Rotating Mechanic</li><li> OO Mechanical Technician</li><li> OO Electrical Technician</li><li> OO HVAC / Chiller Technician</li><li> OO Plumber</li><li>. OO Labour</li><li>. OO Helper (Mechanical)</li><li>. OO Labour / Helper (HVAC)</li><li>. OO Instrumentation Technician</li></ol><p><br></p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>As mentioned </p></div>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential Responsibilities</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential Responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum Requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> <li>Highly desired to have a U.S. passport valid for an additional two years with at least two facing pairs (four total) of blank visa pages.</li> </ul></p><p></p>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship. USAF equivalent position is Aircraft Mechanic Apprentice. Essential Responsibilities: Performs all daily launch/recovery duties in support of operational requirements. Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems. Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion. Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools. Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs. Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft. Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks. May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Must be able to work with little-to-no supervision. Performs all other duties as assigned as requested.</p><p><strong>Desired Candidate Profile</strong></p><p>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum. Minimum of one year of actual Aircraft Mechanic maintenance experience required. Must have basic knowledge of basic and complex mechanical maintenance and repair. Must possess basic knowledge of technical publications related to aircraft mechanical maintenance. Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems. Must be able to inspect and operate ground support and auxiliary equipment. Must achieve a passing grade in all required courses/certifications for continued employment, as needed. Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment. Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods. Must be able to speak, read, write, and understand English. Must submit updated SF-86 within 30 days of hire start date. Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance. Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment. Must have current/active State Issued Driver s License. Must be able to acquire and maintain a valid flight-line Government Driver s License. Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages. Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</p> <p>Associate degree in a relevant career field. Licensed by the FAA as an Airframe and Powerplant Mechanic. RPA Deployment Experience. Prior Experience as a Defense Contractor. Aircraft Mechanic Experience within the last 10 years. MQ-9 Experience as an Aircraft Mechanic. MQ-9 Aircraft Composite Repair / Replacement Experience.</p>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential Responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneumatic/hydraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, including pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<p> seeking a skilled and hands-on Mechanic to support our growing service operations in Kuwait. The role involves diagnosing, repairing, and maintaining a wide range of equipment including diesel generators, tractors, and light construction machinery. This position is primarily field-based and requires strong practical experience and the ability to work independently under site conditions.</p><p><strong>Desired Candidate Profile</strong></p><p>Key Responsibilities</p><ul><li><p>Diagnose, repair, and maintain diesel generators, tractors, and light construction equipment</p></li><li><p>Perform preventive maintenance in line with manufacturer standards</p></li><li><p>Troubleshoot mechanical issues related to engines, fuel systems, cooling systems, and hydraulics</p></li><li><p>Attend on-site service calls, breakdowns, and emergency repairs</p></li><li><p>Assist in installation and commissioning of equipment</p></li><li><p>Prepare clear and accurate service reports</p></li><li><p>Ensure proper handling of tools and company equipment</p></li><li><p>Follow safety procedures and company protocols</p></li></ul><p>Requirements</p><ul><li><p>Proven experience as a Mechanic (diesel engines and equipment)</p></li><li><p>Strong knowledge of diesel engine systems, hydraulics, and basic electrical troubleshooting</p></li><li><p>Ability to diagnose faults independently in field conditions</p></li><li><p>Experience with generators and/or tractors is preferred</p></li><li><p>Willingness to work on-site across Kuwait</p></li><li><p>Basic English communication skills</p></li><li><p>Valid driving license is preferred</p></li></ul><p>Compensation & Benefits</p><ul><li><p>Competitive salary package</p></li><li><p>Company vehicle for field duties</p></li><li><p>Career growth opportunities</p></li><li><p>Exposure to international equipment brands<br><br></p></li></ul>

<p>Key Responsibilities: Diagnose, repair, and maintain cars, vans, and light commercial vehicles. Perform servicing and repairs on engines, transmissions, brakes, suspension, steering, and cooling systems. Identify mechanical and electrical faults using diagnostic equipment. Carry out oil changes, filter replacement, brake servicing, battery checks, and general vehicle maintenance. Inspect vehicles and identify worn or damaged components. Repair or replace defective mechanical and electrical parts. Perform vehicle testing after repairs to ensure proper operation. Maintain service records and follow workshop safety procedures.</p> <p>Technical Skills: Strong knowledge of petrol and diesel vehicle systems. Experience with engine repair, transmission, clutch, braking, suspension, and steering systems. Knowledge of automotive electrical and electronic systems. Ability to use OBD/diagnostic scanners and automotive testing tools. Experience with AC systems, cooling systems, fuel systems, and exhaust systems. Ability to troubleshoot mechanical, electrical, and electronic faults. Knowledge of wheel alignment, balancing, and tyre-related maintenance is an advantage. Ability to read basic vehicle service manuals and technical specifications.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidate Requirements: Minimum 3+ years of relevant experience as an Auto Mechanic. ITI/Diploma/Automotive Trade Certificate or equivalent qualification preferred. Relevant mechanic certification is an advantage. Strong hands-on experience in vehicle servicing and repairs. Good diagnostic and troubleshooting skills. Ability to work independently and as part of a workshop team. Good attention to detail and safety awareness. Physically fit and comfortable working in a workshop environment.</p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> <li>Highly desired to have a U.S. passport valid for an additional two years with at least two facing pairs (four total) of blank visa pages.</li> </ul> <h4>Compensation details</h4> <p>34.17</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Would you like the opportunity to collaborate on a wide range of technical products?</p><br><p>Do you enjoy creating innovative and strategic solutions to solve complex problems?</p><br><p><b>Join our cutting-edge Drilling Services team</b></p><br><p>At Baker Hughes our purpose is clear. We take energy forward making it safer, cleaner and more efficient for people and the planet. Our team partners with the business to effectively enable and sustain change to improve our performance.</p><br><p><b>Partner with the best</b></p><br><p>As an Electro-Mechanic Master / General, you will troubleshoot, test, assemble, disassemble and perform the visual inspection of mechanical assemblies. Whilst assisting in repairing and modifying non-conforming equipment, you will perform all test with minimal instruction.</p><br><p>As an Electro-Mechanic Master, you will be responsible for:</p><br><ul><li>Reviewing procedures for assembly, disassembly, and test verification accuracy Configuring test stations and systems</li><li>Analysing and interpreting data from environmental tests, and troubleshooting equipment problems</li><li>Assisting in the set-up of experiments and the recordings of experimental data in collaboration with Engineering and Reliability groups</li><li>Testing and evaluating the performance and, if required, repairing general purpose test equipment</li><li>Performing quality assurance activities required by manufacturing or engineering specifications and ISO requirements to ensure compliance.</li><li>Working in compliance with HS&amp;E policies and procedures</li></ul><p><b>Fuel your passion</b></p><br><p>To be successful in this role you will:</p><br><ul><li>Have a 3-year technical diploma or associate degree in the electrical/Mechanical field or higher</li><li>Have at least 5 - 10 years of related experience in electro-mechanical function in oil and Gas industry/domain</li><li>High level of knowledge in the maintenance of electronics</li><li>Have advanced skills in soldering and assembling of electro-mechanical devices</li><li>Have the ability to read and interpret blueprints, wiring diagrams, assembly prints and parts lists</li><li>Demonstrate the ability to identify problems and be able to develop solutions</li><li>Have previous experience with Baker Hughes (preferred)</li><li>Display an advanced mechanical aptitude and experience with general hand tools and precision measuring equipment.</li></ul><p><b>Work in a way that works for you</b></p><br><p>We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns:</p><br><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; This role is a shift-based working pattern.</p><br><p><b>Working with us</b></p><br><p>Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.</p><br><p><b>Working for you</b></p><br><p>Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:</p><br><ul><li>Contemporary work-life balance policies and wellbeing activities</li><li>Comprehensive private medical care options</li><li>Safety net of life insurance and disability programs</li><li>Tailored financial programs</li><li>Additional elected or voluntary benefits</li></ul><p>LI_Onsite</p><br>The Baker Hughes internal title for this role is: ARMO Mechanic Master </div>

<p>Heavy Equipment Mechanic skilled in repairing excavators, loaders, bulldozers, cranes, forklifts, and dump trucks. Experienced in diesel engines, hydraulics, transmissions, brakes, electrical systems, troubleshooting, and preventive maintenance.</p>

<p>Hydraulic Mechanic skilled in maintenance, troubleshooting, repair, and overhauling of pumps, motors, cylinders, valves, hoses, and pipes. Experienced in pressure testing, leak detection, component replacement, and hydraulic circuit diagrams.</p>

<p>Hydraulic Mechanic experienced in maintenance, troubleshooting, repair, and overhauling of hydraulic pumps, motors, valves, cylinders, hoses, and control systems. Skilled in pressure testing, leak repair, hydraulic diagrams, and supervising helpers.</p>

<p>Burgan Drilling Company is expanding its operations and is seeking experienced and motivated professionals to join our drilling teams. We are currently recruiting for the following positions:</p><p><strong>Senior Drilling Crew:</strong></p><ul><li>Rig Manager/ Sr. Tool Pusher</li><li>Night Tool Pusher</li><li>Driller</li><li>Assistant Driller</li><li>Chief Electrician</li><li>Chief Mechanic</li><li>Safety Officer</li></ul><p><strong>Junior Drilling Crew:</strong></p><ul><li>Derrickman</li><li>Floorman</li><li>Assistant Electrician</li><li>Assistant Mechanic</li></ul><p>Minimum Requirements:</p><ul><li>Relevant experience in Oil &amp; Gas specifically in deep drilling operations.</li><li>Experience in land drilling rigs is a MUST (3000HP &amp; above).</li><li>Looking for candidates with Intelligent, Pro-Active and proper planning skills.</li><li>Valid IWCF or IADC Well Control Certification for senior drilling crews (Supervisory Level / Driller Level Certificate as applicable)</li><li>Technical qualifications and trade certifications relevant to the position.</li><li>Good communication skills in English. (Reading &amp;Writing)</li><li>Medically fit and able to work in remote operational locations.</li><li>Strong commitment to safety and compliance with QHSE standards.</li></ul><p>Preferred Experience:</p><ul><li>Should have worked currently on 3000 HP or Minimum 2000HP Land Drilling Rigs.</li><li>Previous experience with International Drilling contractors is an advantage.</li><li>Middle East (GCC Countries) drilling experience is preferred.</li></ul><p>Interested candidates are invited to submit their updated CV, clearly indicating the position applied for with total years of drilling experience, rig types worked on, current location, availability with IWCF/Well Sharp Validity details.</p><p>Note: Only shortlisted candidates who meet the required qualifications and experience will be contacted.</p><p><strong>Desired Candidate Profile</strong></p><p><b>Minimum Requirements:</b></p><ul><li>Relevant experience in Oil &amp; Gas specifically in deep drilling operations.</li><li>Experience in land drilling rigs is a MUST (3000HP &amp; above).</li><li>Looking for candidates with Intelligent, Pro-Active and proper planning skills.</li><li>Valid IWCF or IADC Well Control Certification for senior drilling crews (Supervisory Level / Driller Level Certificate as applicable)</li><li>Technical qualifications and trade certifications relevant to the position.</li><li>Good communication skills in English. (Reading &amp;Writing)</li><li>Medically fit and able to work in remote operational locations.</li><li>Strong commitment to safety and compliance with QHSE standards.</li></ul><p>Preferred Experience:</p><ul><li>Should have worked currently on 3000 HP or Minimum 2000HP Land Drilling Rigs.</li><li>Previous experience with International Drilling contractors is an advantage.</li><li>Middle East (GCC Countries) drilling experience is preferred.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a skilled Diesel Mechanic to join our dynamic team within the construction and building industry in Kuwait. This role is crucial as it involves maintaining and repairing our fleet of heavy diesel machinery, which is essential for our ongoing projects. As a Diesel Mechanic, you will have the opportunity to work with cutting-edge technology and equipment, ensuring that our operations run smoothly and efficiently. This position not only offers a chance to showcase your technical skills but also provides a pathway for career advancement within our organization.</p><p>In this role, you will be part of a collaborative team that values innovation and continuous improvement. We believe in fostering a supportive work environment where employees can grow and develop their skills. You will receive training and mentorship from experienced professionals who are dedicated to your success. Our company culture emphasizes teamwork, respect, and shared goals, allowing you to thrive in your career while contributing to significant projects that make a difference in the community.</p><p>We are committed to your professional development, offering opportunities for further training and certifications in diesel technology and machinery maintenance. As you excel in your role, you will have the chance to take on more responsibilities and potentially move into supervisory or specialized positions. Join us and become a part of a company that invests in its employees and values their contributions to our success.</p><p><b>Responsibilities:</b></p><ol><li>Perform routine maintenance and repairs on diesel engines and related systems, using diagnostic tools and equipment to ensure optimal performance and compliance with safety standards.</li><li>Diagnose and troubleshoot mechanical issues in heavy machinery, utilizing your technical expertise to identify root causes and implement effective solutions.</li><li>Maintain accurate records of repairs and maintenance activities, ensuring compliance with company policies and contributing to inventory management for parts and tools.</li><li>Collaborate with other mechanics and engineers to develop maintenance schedules that minimize downtime and enhance the efficiency of our equipment.</li><li>Conduct inspections of machinery before and after use, ensuring that all safety protocols are adhered to and that equipment is in safe working condition.</li><li>Assist in the training of junior mechanics, sharing your knowledge and experience to foster a culture of learning and development within the team.</li><li>Stay updated on industry trends and advancements in diesel technology, applying new techniques and practices to improve maintenance processes.</li><li>Support the procurement process by advising on necessary parts and tools required for repairs and maintenance, ensuring minimal disruption to operations.</li><li>Participate in safety meetings and contribute to a culture of safety, ensuring that all work is performed in accordance with established safety regulations and best practices.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Proficient in diagnosing and repairing diesel engines and components.</li><li>Strong understanding of hydraulic and electrical systems in heavy machinery.</li><li>Experience with diagnostic tools and software for troubleshooting mechanical issues.</li><li>Ability to read and interpret technical manuals and schematics.</li><li>Excellent problem-solving skills and attention to detail.</li><li>Strong communication skills for effective collaboration with team members.</li><li>Commitment to safety and adherence to industry regulations.</li></ul></div>

EPP III, Generator (3 - 150KW) and HVAC Technician Kuwait, Perform troubleshooting, diagnostics, maintenance, and services on all types of military and commercial generators and HVAC systems used by the U.S. Army to include the 150kW EPP III generators. MEANINGFUL WORK AND PERSONAL IMPACT As a Generator and HVAC Mechanic, the work you ll do at GDIT will be impactful to the mission of the Worldwide Field Support contract for the U.S. Army. You ll play a crucial role in providing on-site technical and maintenance assistance, analyzing complex technical problems, and providing training to site operations and maintenance personnel. Perform maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Troubleshoot and repair HVAC, Chillers, and Environmental Control Units some are standalone units and others are mounted on trailers and vehicles. Maintain all types of commercial power generation equipment; military spec generators and Uninterrupted Power Systems (UPS). Operate a Load bank during testing Fabricate wire harnesses and solder terminals. Some work will be in a generator shop environment, and some work will be in a field environment. Other duties as assigned. WHAT YOU LL NEED TO SUCCEED Bring your Generator and HVAC expertise along with a drive for innovation to GDIT. The Generator and HVAC Mechanic must have: Education: High School diploma Experience: BA/BS plus 2 years experience, AA/AS/plus 4 years experience, or a High School diploma and 7 years experience Technical skills: Extensive diesel generator experience. Knowledge of generator parallel systems and switch gear. Experience with brazing copper tubing and evacuating and recharging refrigerant. Security Clearance: Secret Travel to Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, Iraq Role requirements: US passport must not expire for at least 2 years, valid US driver s license, and an international driver s permit (AAA) Skills Generator Repair HVAC Repair/Troubleshooting Generator Troubleshooting Power Generation Certifications Section 608 Technician Certification EPA is a plusMust meet CRC fitness standards for deployment to SWA (southwest Asia) and maintain those standards annually while on contract in SWA. GDIT IS YOUR PLACE At GDIT, the mission is our purpose, and our people are at the center of everything we do. Growth: AI-powered career tool that identifies career steps and learning opportunities. Support: An internal mobility team focused on helping you achieve your career goals. Rewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay. Community: Award-winning culture of innovation and a military-friendly workplace. OWN YOUR OPPORTUNITY Explore a career in program management at GDIT and you ll find endless opportunities to grow alongside colleagues who share your passion for the mission and delivering results. #GDITPriority #CECOMWFS #DefenseOCONUS

<p>Generator (3 - 150KW) and HVAC Technician Kuwait Perform troubleshooting, diagnostics, maintenance, and services on all types of military and commercial generators and HVAC systems used by the U.S. Army to include the 150kw generators. MEANINGFUL WORK AND PERSONAL IMPACT As a Generator and HVAC Mechanic, the work you ll do at GDIT will be impactful to the mission of the Worldwide Field Support contract for the U.S. Army. You ll play a crucial role in providing on-site technical and maintenance assistance, analyzing complex technical problems, and providing training to site operations and maintenance personnel.Perform maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories.Perform overhaul, maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories.Troubleshoot and repair HVAC, Chillers, and Environmental Control Units some are standalone units and others are mounted on trailers and vehicles.Maintain all types of commercial power generation equipment; military spec generators and Uninterrupted Power Systems (UPS).Operate a Load bank during testingFabricate wire harnesses and solder terminals.Some work will be in a generator shop environment, and some work will be in a field environment.Other duties as assigned. WHAT YOU LL NEED TO SUCCEED Bring your Generator and HVAC expertise along with a drive for innovation to GDIT. The Generator and HVAC Mechanic must have:Extensive diesel generator experience. Knowledge of generator parallel systems and switch gear. Experience with brazing copper tubing and evacuating and recharging refrigerant.Able to obtain and maintain a Secret Clearance.Travel to Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, IraqRole requirements: US passport must not expire for at least 2 years, valid US driver s license, and an international driver s permit (AAA). Ability to pass CRC to deploy.SkillsGenerator RepairHVAC Repair/TroubleshootingGenerator TroubleshootingPower Generation CertificationsSection 608 Technician Certification EPA is a plus GDIT IS YOUR PLACE At GDIT, the mission is our purpose, and our people are at the center of everything we do.Growth: AI-powered career tool that identifies career steps and learning opportunities.Support: An internal mobility team focused on helping you achieve your career goals.Rewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay.Community: Award-winning culture of innovation and a military-friendly workplace. OWN YOUR OPPORTUNITY Explore a career in program management at GDIT and you ll find endless opportunities to grow alongside colleagues who share your passion for the mission and delivering results. #GDITPriority #CECOMWFS #DefenseOCONUS</p><p><strong>Desired Candidate Profile</strong></p><p>Education: High School diplomaExperience: BA/BS plus 2 years experience, AA/AS/plus 4 years experience, or a High School diploma and 7 years experienceTechnical skills: Extensive diesel generator experience. Knowledge of generator parallel systems and switch gear. Experience with brazing copper tubing and evacuating and recharging refrigerant.Security Clearance: Able to obtain and maintain a Secret Clearance.Travel to Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, IraqRole requirements: US passport must not expire for at least 2 years, valid US driver s license, and an international driver s permit (AAA). Ability to pass CRC to deploy.SkillsGenerator RepairHVAC Repair/TroubleshootingGenerator TroubleshootingPower Generation CertificationsSection 608 Technician Certification EPA is a plus</p>

<p><b>Job Details</b></p><p>Position: Machine Mechanic</p><p>Location: Kuwait</p><p>Experience: Minimum 23 Years</p><p>Qualification: ITI / Diploma in Mechanical preferred</p><p>Industry: FMCG / Food &amp; Beverage / Bottling / Packaging</p><p>Required Experience</p><p>Candidate should have hands-on experience in FMCG/production plants and be able to independently handle maintenance and breakdown of:</p><ul><li>Filling Machines</li><li>Bottling Machines</li><li>Packaging Machines</li><li>Production Line Machinery</li><li>Conveyor Systems</li><li>Mechanical equipment</li></ul><p>Key Responsibilities</p><ul><li>Preventive and breakdown maintenance of production machinery</li><li>Troubleshooting and repairing mechanical faults</li><li>Regular inspection and servicing of machines</li><li>Machine overhauling, alignment and replacement of mechanical parts</li><li>Maintenance of hydraulic and pneumatic systems</li><li>Minimize machine breakdown and production downtime</li><li>Follow safety and maintenance procedures</li></ul><p>Benefits</p><ul><li>Accommodation Company Provided</li><li>Transportation Company Provided</li><li>8 Hours Duty</li><li>6 Days Working</li><li>Overtime Available</li></ul><p>Interested candidates can apply with their updated CV.</p><p>Kuwait | Immediate Hiring</p><p><strong>Desired Candidate Profile</strong></p><p>FMCG / Beverage / Bottling / Food Processing / Packaging industry experience is highly preferred. Only candidates with relevant production machinery maintenance experience will be considered.</p>

<p><b>Job Details</b></p><p>Position: Machine Mechanic</p><p>Location: Kuwait</p><p>Experience: Minimum 23 Years</p><p>Qualification: ITI / Diploma in Mechanical preferred</p><p>Industry: FMCG / Food &amp; Beverage / Bottling / Packaging</p><p>Required Experience</p><p>Candidate should have hands-on experience in FMCG/production plants and be able to independently handle maintenance and breakdown of:</p><ul><li>Filling Machines</li><li>Bottling Machines</li><li>Packaging Machines</li><li>Production Line Machinery</li><li>Conveyor Systems</li><li>Mechanical equipment</li></ul><p>Key Responsibilities</p><ul><li>Preventive and breakdown maintenance of production machinery</li><li>Troubleshooting and repairing mechanical faults</li><li>Regular inspection and servicing of machines</li><li>Machine overhauling, alignment and replacement of mechanical parts</li><li>Maintenance of hydraulic and pneumatic systems</li><li>Minimize machine breakdown and production downtime</li><li>Follow safety and maintenance procedures</li></ul><p>Benefits</p><ul><li>Accommodation</li><li>Company Provided Transportation</li><li>Company Provided 8 Hours Duty</li><li>6 Days Working</li><li>Overtime Available</li></ul><p>Interested candidates can apply with their updated CV.</p><p>Kuwait | Immediate Hiring</p><p><strong>Desired Candidate Profile</strong></p><p>FMCG / Beverage / Bottling / Food Processing / Packaging industry experience is highly preferred.Only candidates with relevant production machinery maintenance experience will be considered.</p>