Operation Specialist Jobs in Kuwait 2026

7 - 12 Years Naukri Gulf

Junior Red Switch Technician

On-site - Kuwait - Capital Governorate (Kuwait) 7 August 2026

Research & Development

Operation and Maintenance (O&M) of the Digital Small Switch DSS-2A Monitor trunk and circuit outages as well as the administrative terminal and Enhanced Command Console (ECC). Perform direct trunk dialing checks over trunk channels associated with the switch to ensure satisfactory operation of voice circuits (at least once each shift and following any trunk failure). Perform Preventive Maintenance Inspections (PMIs) on the switch and peripheral equipment. Conduct systems checks every 2 hours. Create and update databases in the administrative terminal using information received from users, Raytheon, and DISA. Perform database backups to CD-R discs. Perform database downloads to update switch configurations. Update and print out telephone console information and line strips for users. Fabricate custom interface cables using hand tools and wiring diagrams. Escort individuals requiring access to the Red Switch in the performance of their duties. Ensure that all outages are reported in a timely manner to the DISA GNOSC, NOC-K, TCF, V2X management for tracking in Army Enterprise Service Management Platform (AESMP) ticketing system. Provide hourly status updates to designated agencies regarding outages, etc. Annotate all activities in the Master Station Log (MSL) database. Prepare call detail history reports for DISA and military personnel as directed. Contribute to weekly reports with regard to your additional duties and other assigned tasks. Complete individual timesheets on a daily basis. Check the Regional Cyber Center (RCC) website for accuracy regarding authorized service interruptions (ASIs) and outages. Initiate Quality Control checklists as they pertain to your additional duties. Update training records as needed. Update memorandums and technical drawings (including block diagrams and schematics) as directed. Inventory Communications Security (COMSEC) equipment and document DA Form 2653-R (each shift). Work with military technical monitor(s), Special Security Office (SSO) and other Department of Defense contractors and civilians including local hires in support of the DRSN mission. Interface with technicians from Outside Plant, DPW, FMO etc. regarding installations in support of the DRSN mission. Coordinate with the Raytheon Help Desk for troubleshooting problems that cannot be resolved locally. Contact the Return Merchandise Authorization (RMA) Help Desk in order to obtain an RMA for processing Depot equipment repairs. Performs other duties and assignments as required.Desired Candidate Profile<ul><li>Active Top Secret SSBI within the past two years.</li><li>Individual must be eligible for Sensitive Compartmentalized Information (SCI) Access.</li><li>High School Diploma required.</li><li>Bachelor s Degree in IT or related field preferred.</li><li>Cardiopulmonary Resuscitation (CPR) ( Provided by contract )</li><li>One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree.</li><li>Seven years experience in Communications-Electronics Maintenance functions: installation, troubleshooting and repair of electronic communications equipment.</li><li>Use of phone Digital sender, and desktop computer in a fast-paced office environment is desirable.</li><li>A working knowledge of Microsoft Office software is required.</li><li>Must be able to work rotating shift schedules which provide 24-hour day/7-day week coverage.</li><li>Military or civilian technical training course of six (6) months or more is required.</li><li>This should be followed by a minimum of 24 months of on-the-job training (OJT).</li><li>A certificate of completion will suffice until verification of the training on your DD-214 can be completed.</li><li>Experience with a customer service-oriented company</li></ul>

0 to 0 years Naukri Gulf

Network Manager II

On-site - Kuwait - Capital Governorate (Kuwait) 12 June 2026

Information Technology

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">GDIT is seeking a Network Manager II to join their team. This role involves ensuring the functionality and efficiency of computer systems, maintaining workflows, and providing basic hardware and software audits. The Network Manager II will also be responsible for training end-users and ensuring the performance and security of network resources.</div></section><section>Desired Candidate ProfileHOW A NETWORK MANAGER II WILL MAKE AN IMPACTManages the functionality and efficiency of a group of computers running on one or more operating systemsMaintain organization's systems' workflows; responsible for upkeep, configuration, and reliable operationLeverage experience in systems management, monitoring and sustainment.Trains end users on the proper use of hardware and softwareConducts basic hardware and software audits of workstations and servers to ensure compliance with established standards, policies, and configuration guidelinesEnsures that performance and security of computers meet the needs of network usersWHAT YOU LL NEED TO SUCCEED:Education: Technical Training; Security+, MCSA, CCNP (RS or Datacenter)Required Experience: 1+ years of relatedRequired Technical Skills: Management of networks, software, hardware, configurations, and architecturesSecurity Clearance Level: SECRETRequired Skills and Abilities: Fixing network issues along with updating equipment and softwareLocation: On Customer SiteUS Citizenship Required: Security ClearanceCERTIFICATIONS: Must meet the certification requirement of DoW 8570.01-M or otherwise stated in SPIN-C or individual task order. The contractor is expected to have, but is not limited to, the following IT certificate: Security+ Microsoft Certified Solutions Associate (MCSA) Cisco Certified Network Professional (CCNP) RS or DatacenterGENERAL EXPERIENCE: Intermediate level of experience in design, maintenance, and operation of medium to large networks. Must have experience in systems management, monitoring and sustainment.</section>

Full Time 5 to 10 years Tanqeeb.com

Senior Electrician

On-site - Kuwait - Al Farwaniyah 5 June 2026

Residence Co. For Building Construction is looking for qualified electricians to join our team for residential villa and housing projects in Kuwait. Available Positions: 1️⃣ Electrician Responsibilities:• Carry out electrical rough-in and wiring works for residential buildings and villas.• Read and execute basic electrical drawings.• Install sub-distribution boards.• Perform electrical finishing works.• Install switches, sockets, and lighting fixtures.• Diagnose and repair common electrical faults.• Follow safety and quality standards on site. Requirements:• Practical experience in electrical rough-in and finishing works.• Ability to work with limited supervision.• Commitment, discipline, and ability to work under pressure. Salary: 160 KD per month. ━━━━━━━━━━━━━━ 2️⃣ Senior Electrician / Lead Electrician Responsibilities:• Execute all electrical works from drawing stage to final handover.• Supervise and assign tasks to electricians and helpers.• Determine and request required materials for the site.• Review and implement electrical drawings.• Test electrical circuits and distribution boards to ensure proper operation.• Troubleshoot and solve complex electrical issues.• Coordinate directly with the site engineer and project management.• Handle maintenance and after-sales service during the warranty period. Requirements:• Strong experience in residential villas and housing electrical projects.• Ability to lead and manage a site electrical team.• Good knowledge of electrical drawings and site execution.• Strong problem-solving and decision-making skills. Salary: 250 KD per month. ━━━━━━━━━━━━━━ Benefits:✓ Free accommodation provided by the company.✓ Basic food supplies provided at the workers’ accommodation.✓ Free transportation to and from work sites.✓ Stable working environment.✓ Career growth and promotion opportunities. Working Schedule:• 6 working days per week. Preferred Nationalities:• Filipino• Indian• Pakistani Location:Kuwait

1 - 3 Years Naukri Gulf

Lead Pest Controller

On-site - Kuwait - Capital Governorate (Kuwait) 3 June 2026

Research & Development

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">Overview **This position will be physically located in Kuwait in support of LOGCAP** Under the supervision of the Pest Management Supervisor, the Pest Controller Lead is responsible to the assigned supervisor in performance of their duties. Assigns work to and oversees work being accomplished by Pest Controllers. Assures safety practices are followed. Major areas of responsibility include, but are not limited to: residential, commercial, and industrial pest management services, and the safe and efficient operation of industry particular equipment for LOGCAP V AOR. Must be knowledgeable of laws governing the application of controlled and non-controlled pesticides and herbicides Coordinates work/inspections with facility managers/occupants. Researches materials, and prepares necessary documents. Responds to emergency service calls during regular hours or after-duty on-call hours. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. <ul> <li>Assigns work to and oversees work being accomplished by Pest Controllers.</li> <li>Assures safety practices are followed. Major areas of responsibility include, but are not limited to: residential, commercial, and industrial pest management services, and the safe and efficient operation of industry particular equipment for LOGCAP V AOR.</li> <li>Must be knowledgeable of laws governing the application of controlled and non-controlled pesticides and herbicides Coordinates work/inspections with facility managers/occupants.</li> <li>Researches materials, and prepares necessary documents.</li> <li>Responds to emergency service calls during regular hours or after-duty on-call hours.</li> </ul> Qualifications <ul> <li> Minimum Qualifications: Education/Certifications: One year related experience may be substituted for one year of education, if degree is required. <ul> <li>Must be a U.S. Citizen High School Graduate or equivalent</li> <li>Capable of effectively communicating technical information in English, both written and verbal</li> <li>Must possess a valid/current (DoD or State) Pesticide Applicator License</li> </ul> </li> <li> Experience: <ul> <li>Minimum of two (2) year experience in the Pest Control field</li> </ul> </li> <li> Skills: <ul> <li>Excellent communication and people skills.</li> <li>Able to use computer-automated systems to perform assigned duties</li> </ul> </li> <li> Working Conditions: <ul> <li>Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit.</li> <li>Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months).</li> <li>Includes some industrial production environment conditions as well.</li> </ul> </li> <li> Physical Requirements: <ul> <li>Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects.</li> <li>If the use of arm and/or leg controls requires exertion of forces greater than that for sedentary work and the worker sits most of the time, the job is rated for light work.</li> <li>Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices.</li> <li>Must comply with all Fire and Safety Regulations and post policies.</li> </ul> </li> </ul> At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</div></section>

1 - 3 Years Naukri Gulf

Pest Management Supervisor

On-site - Kuwait - Capital Governorate (Kuwait) 3 June 2026

Research & Development

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">Overview **This position will be physically located in Kuwait in support of LOGCAP** Under the supervision of the Pest Management Coordinator; assures safety practices are followed. Major areas of responsibility include, but are not limited to: residential, commercial, and industrial pest management services, and the safe and efficient operation of industry-particular equipment for LOGCAP V AOR. Must be knowledgeable of laws governing the application of controlled and non-controlled pesticides and herbicides. Coordinates work/inspections with facility managers/occupants. Researches materials, and prepares necessary documents. Responds to emergency service calls during regular hours or after-duty on-call hours. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. <ul> <li>Assures safety practices are followed</li> <li>Major areas of responsibility include, but are not limited to: residential, commercial, and industrial pest management services, and the safe and efficient operation of industry-particular equipment for LOGCAP V AOR.</li> <li>Must be knowledgeable of laws governing the application of controlled and non-controlled pesticides and herbicides.</li> <li>Coordinates work/inspections with facility managers/occupants.</li> <li>Researches materials, and prepares necessary documents.</li> <li>Responds to emergency service calls during regular hours or after-duty on-call hours.</li> </ul> Qualifications <ul> <li> Minimum Qualifications: Education/Certifications: One year related experience may be substituted for one year of education, if degree is required. <ul> <li>Must be a U.S. Citizen</li> <li>A valid driver s license and the ability to obtain a U. S. Government Motor Vehicle Operator s License and host nation Driver s License, is required.</li> </ul> </li> <li> Education: <ul> <li>High school diploma or equivalent. Must provide a copy of the diploma.</li> </ul> </li> <li> Experience: <ul> <li>Minimum of one (1) year experience in the Pest Control field.</li> </ul> </li> <li> Skills: <ul> <li>Excellent communication and people skills</li> <li>Able to use computer-automated systems to perform assigned duties.</li> </ul> </li> <li> Working Conditions: <ul> <li>Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit.</li> <li>Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months).</li> <li>Includes some industrial production environment conditions as well.</li> </ul> </li> <li> Physical Requirements: <ul> <li>Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.</li> <li>Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents.</li> <li>Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices.</li> <li>Must comply with all Fire and Safety Regulations and post policies.</li> </ul> </li> </ul> At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</div></section>

Bayt

Lead Pest Controller

On-site - Kuwait 31 May 2026

Other

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Overview **This position will be physically located in Kuwait in support of LOGCAP** Under the supervision of the Pest Management Supervisor, the Pest Controller Lead is responsible to the assigned supervisor in performance of their duties. Assigns work to and oversees work being accomplished by Pest Controllers. Assures safety practices are followed. Major areas of responsibility include, but are not limited to: residential, commercial, and industrial pest management services, and the safe and efficient operation of industry particular equipment for LOGCAP V AOR. Must be knowledgeable of laws governing the application of controlled and non-controlled pesticides and herbicides Coordinates work/inspections with facility managers/occupants. Researches materials, and prepares necessary documents. Responds to emergency service calls during regular hours or after-duty on-call hours. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Assigns work to and oversees work being accomplished by Pest Controllers. + Assures safety practices are followed. Major areas of responsibility include, but are not limited to: residential, commercial, and industrial pest management services, and the safe and efficient operation of industry particular equipment for LOGCAP V AOR. + Must be knowledgeable of laws governing the application of controlled and non-controlled pesticides and herbicides Coordinates work/inspections with facility managers/occupants. + Researches materials, and prepares necessary documents. + Responds to emergency service calls during regular hours or after-duty on-call hours. Qualifications + Minimum Qualifications: Education/Certifications: One year related experience may be substituted for one year of education, if degree is required. + Must be a U.S. Citizen High School Graduate or equivalent + Capable of effectively communicating technical information in English, both written and verbal + Must possess a valid/current (DoD or State) Pesticide Applicator License + Experience: + Minimum of two (2) year experience in the Pest Control field + Skills: + Excellent communication and people skills. + Able to use computer-automated systems to perform assigned duties + Working Conditions: + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. + Physical Requirements: + Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. + If the use of arm and/or leg controls requires exertion of forces greater than that for sedentary work and the worker sits most of the time, the job is rated for light work. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients. </div>

Full Time Bayt

General Electrician

On-site - Kuwait 16 August 2026

Technical & Labor

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Skills and Behavioral CompetenciesCommunication:<ul><li> Ability to communicate effectively verbally and in writing.</li><li>Effective communication with others (co-workers, supervisors, and other departments) through providing and exchanging information.</li></ul>Professional Skills and Abilities:<ul><li>Practical experience in maintaining electrical installations and control panels.</li><li>Hands-on experience in diagnosing and identifying electrical faults in equipment.</li><li>Familiarity with how to install spare parts and conduct routine checks for the efficiency of electrical components.</li><li>Thorough understanding of the nature of work, equipment, and materials used in the company.</li><li>Strong manual skills and physical abilities to stand for long hours during work.</li><li>Proficiency in work, and speed in performing assigned tasks.</li><li>Ability to work in a noisy environment.</li><li>Adherence to all safety precautions.</li><li>Attention to detail.</li><li>Optimal interaction with employees in the company and mastery of work while maintaining the company’s properties and secrets.</li><li>Ability to work under pressure.</li></ul>Languages:• Ability to communicate in Arabic or English conversationally at least.Personal Skills:<ul><li>Flexibility in work and teamwork skills.</li><li>Ability to take responsibility and build trust with others.</li><li>Knowledge of labor laws.</li><li>Calm and non-reactive demeanor.</li></ul>Tasks and Responsibilities<ul><li>Identify required materials for the maintenance of equipment and electrical control systems and their specifications, and estimate their quantities according to the approved user manuals from manufacturers.</li><li>Prepare the necessary tools, equipment, materials, and instruments for inspection, installation, maintenance, and repair work.</li><li>Install and replace electrical spare parts and repair electrical faults.</li><li>Diagnose, troubleshoot, and repair electrical faults in equipment and control systems.</li><li>Replace defective electrical equipment and components when required.</li><li>Install and connect electrical wiring and provide electrical connections for equipment and machinery.</li><li>Read and interpret electrical, technical, and equipment diagrams.</li><li>Conduct routine inspections and preventive maintenance of electrical and electronic circuits, equipment, and control systems.</li><li>Maintain accurate maintenance records, including standard spare parts replacement and consumption intervals.</li><li>Coordinate with relevant departments to ensure the availability of required spare parts.</li><li>Coordinate with mechanical maintenance technicians and other teams involved in maintenance activities.</li><li>Ensure compliance with company health, safety, and occupational safety standards and procedures.</li><li>Follow approved equipment operation and electrical maintenance procedures and technical supervisor instructions.</li><li>Prepare periodic reports on equipment condition, maintenance activities, and upcoming maintenance schedules.</li><li>Monitor spare parts inventory and prepare proactive requests for frequently consumed parts.</li><li>Verify spare parts specifications and ensure the use of genuine parts to maintain equipment efficiency and reliability.</li><li>Record maintenance observations and discuss them with the technical supervisor to improve maintenance efficiency.</li><li>Keep up to date with industry trends and developments in equipment maintenance and electrical control systems.</li><li>Perform any other duties related to the role as assigned by the supervisor.</li></ul>Qualifications:<ul><li>Electrical Engineering, Maintenance, or equivalent</li><li>High School Diploma</li></ul>Experience:<ul><li>Minimum 3 years of experience in installation and maintenance of equipment and device electrical systems</li><li>Minimum 5 years of experience in installation and maintenance of equipment and device electrical systems</li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills">Job SummaryResponsible for inspecting, maintaining, troubleshooting, and repairing electrical systems, equipment, and control panels to ensure safe, reliable, and efficient operation. The role involves preventive maintenance, fault diagnosis, electrical installations, spare parts replacement, and coordination with maintenance and technical teams.Key Responsibilities<ul><li>Identify required materials, spare parts, tools, and equipment for electrical maintenance activities based on approved manufacturer manuals and specifications.</li><li>Prepare the necessary tools, equipment, materials, and instruments for inspection, installation, maintenance, and repair work.</li><li>Install and replace electrical spare parts and repair electrical faults.</li><li>Diagnose, troubleshoot, and repair electrical faults in equipment and control systems.</li><li>Replace defective electrical equipment and components when required.</li><li>Install and connect electrical wiring and provide electrical connections for equipment and machinery.</li><li>Read and interpret electrical, technical, and equipment diagrams.</li><li>Conduct routine inspections and preventive maintenance of electrical and electronic circuits, equipment, and control systems.</li><li>Maintain accurate maintenance records, including standard spare parts replacement and consumption intervals.</li><li>Coordinate with relevant departments to ensure the availability of required spare parts.</li><li>Coordinate with mechanical maintenance technicians and other teams involved in maintenance activities.</li><li>Ensure compliance with company health, safety, and occupational safety standards and procedures.</li><li>Follow approved equipment operation and electrical maintenance procedures and technical supervisor instructions.</li><li>Prepare periodic reports on equipment condition, maintenance activities, and upcoming maintenance schedules.</li><li>Monitor spare parts inventory and prepare proactive requests for frequently consumed parts.</li><li>Verify spare parts specifications and ensure the use of genuine parts to maintain equipment efficiency and reliability.</li><li>Record maintenance observations and discuss them with the technical supervisor to improve maintenance efficiency.</li><li>Keep up to date with industry trends and developments in equipment maintenance and electrical control systems.</li><li>Perform any other duties related to the role as assigned by the supervisor.</li></ul>Required Skills & Competencies<ul><li>Practical experience in electrical installation maintenance and control panels.</li><li>Hands-on experience in diagnosing and troubleshooting electrical equipment faults.</li><li>Knowledge of electrical spare parts installation and routine testing of electrical components.</li><li>Good understanding of electrical equipment, machinery, and control systems.</li><li>Ability to read and understand technical and electrical drawings.</li><li>Strong practical and manual skills.</li><li>Ability to stand and work for extended periods and work in noisy environments.</li><li>Strong attention to detail and accuracy.</li><li>Ability to complete assigned tasks efficiently and effectively.</li><li>Ability to work under pressure.</li><li>Strong commitment to health and safety procedures.</li><li>Good teamwork, flexibility, and interpersonal skills.</li><li>Responsible, trustworthy, calm, and professional approach to work.</li><li>Ability to maintain company property and confidentiality.</li></ul>Language Requirements<ul><li>Ability to communicate in Arabic or English, at least at a conversational level.</li></ul>Qualifications:<ul><li>Electrical Engineering, Maintenance, or equivalent</li><li>High School Diploma</li></ul>Experience:<ul><li>Minimum 3 years of experience in installation and maintenance of equipment and device electrical systems</li><li>Minimum 5 years of experience in installation and maintenance of equipment and device electrical systems</li></ul> </div>

0 to 0 years Naukri Gulf

Electrical Superintendent

On-site - Kuwait - Capital Governorate (Kuwait) 2 July 2026

Engineering

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">We are seeking Electrical Superintendents for deep drilling onshore rigs for our client in Kuwait. Position Overview: The Electrical Superintendent is responsible for leading and supervising all electrical maintenance activities across assigned onshore deep drilling rigs, ensuring safe, reliable, and efficient operation of rig electrical systems. Key Responsibilities Supervise and coordinate all electrical maintenance activities on drilling rigs, including preventive, predictive, and corrective maintenance. Ensure reliable operation of rig power generation, distribution systems, and drilling electrical equipment. Troubleshoot and resolve complex electrical and control system failures in a timely manner. Oversee maintenance of SCR/AC drive systems, VFDs, MCCs, PLCs, and rig instrumentation systems. Ensure proper functioning of critical equipment such as top drives, drawworks, mud pumps, and auxiliary systems. Plan and execute electrical maintenance schedules in coordination with rig and maintenance management. Monitor equipment performance and ensure high standards of reliability and operational readiness. Ensure compliance with OEM guidelines, maintenance procedures, and company technical standards. Maintain accurate maintenance records using CMMS or other maintenance tracking systems. Manage electrical spare parts usage and support inventory control processes. HSE Responsibilities Enforce strict adherence to electrical safety standards and company HSE policies. Ensure compliance with Permit-to-Work (PTW), Lockout/Tagout (LOTO), and isolation procedures. Conduct and participate in risk assessments and toolbox talks. Support incident investigations and implementation of corrective actions. Promote a strong safety culture across all rig electrical operations. Leadership & Coordination Supervise and mentor rig electricians and junior electrical staff. Provide technical guidance and on-the-job training to improve workforce competency. Coordinate with Mechanical, Drilling, and Maintenance teams to ensure smooth operations. Support mobilization, commissioning, and startup of rigs when required.</div></section><section>Desired Candidate ProfileDiploma or Bachelor's degree in Electrical Engineering or equivalent technical qualification. Candidates from Canada, United States, Europe, Eastern Europe, Australia, China are preferred. Experience of 8+ years in oil & gas drilling with 3 5 years in a supervisory role on onshore drilling rigs. Strong hands-on experience with SCR/AC drilling rigs in deep drilling operations. GCC/Middle East experience is highly preferred.</section>

0 to 0 years Naukri Gulf

Roustabout

On-site - Kuwait - Capital Governorate (Kuwait) 16 July 2026

Engineering

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">Carry out general activities related to lifting, rigging & slinging of all loads lifted and moved by cranes and other lifting equipment, housekeeping, chipping, painting and repair of equipment in a proper & timely manner to ensure a safe & efficient operation.Roles & Responsibilities:General duties: Performs general duties in such a manner which results in achieving the operating plan and objectives set forth by the Driller and STP that includes Safety, operating expectation and rig appearance and housekeeping. Assists other rig departments such as the drilling crew on rig floor, welder, Maintenance Team, etc.Lifting Operations: Hook on loads for the crane and forklift operators and act as a banksman when required. Assist crane and forklift operators in off-loading and loading all drilling materials and supplies as required. Comply and apply safe rigging & slinging practices, from pre-lift requirements, wire inspections, correct use of taglines, proper use of hands-free tools and body placements, and the use of verbal and hand signaling methods.Rig Move: Carry out relevant duties and activities to prepare for rig moves as directed by the Driller.Drilling / Work-over Operations: Assists in operations for preparing drilling mud activities including mixing chemicals at the mixing hopper, cleaning out mud pits, etc. Assist in completing the cleaning, preparation and handling of tubulars and drilling tools. Supply the drill floor with tubulars, drilling tools and equipment as required. Liaise and co-operate with the Driller and Assistant Driller to ensure the safe and smooth running of operations.Materials & Equipment: Ensures that lifting material and equipment are properly maintained, stored, inspected, and returned to its proper storage location in a condition where its ready to be used as per directed. Ensure thread protectors are properly installed on drill pipes, drill collars & crossovers that are being hoisted or stored.Housekeeping: Ensures that the work area is clean and organized, free of hazards prior to & upon completing the work tasks, or repairs. Ensure that housekeeping standards in all areas are in accordance with Company requirements. Disposes of debris as per the company hazardous material segregations policy/waste management policy taking into consideration the environmental & safety aspects. Prepare surfaces for painting and apply paint as directed. Secure the current work area or operation before evacuating during emergency situations or drill.</div></section><section>Desired Candidate ProfileEducation & Experience: High School or Technical Degree Preferably 1 year of working experience preferably in similar Oil and Gas industries. Minimum age 20 years up to 27 years old.Skills/Competencies Required: Elementary level of English language. Basic Mathematical skills adding, subtracting, dividing, multiplying . Situation Awareness / self-motivation, Teamwork, Time management / Managing work.Physical Requirements: Frequent climbing (stairs, ladders). Frequent lifting, pulling & pushing as per Company procedure. Ability to work under different extreme weather conditions such as: Heat, Noise, Humidity & Cold. Ability to work in day/night shifts.Certifications: As per ADES Training Matrix.</section>

Full Time 8+ Years of Experience Bayt

Mechanical Engineer

On-site - Kuwait 10 August 2026

Manufacturing & Production

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Mechanical Engineer ensures the safety, efficiency, and continuous operation of a facility’s water, sanitation, and fire suppression systems. They conduct routine inspections, manage preventive maintenance schedules, troubleshoot system failures, and ensure full compliance with international safety standards and local regulations. </div><h2 class="h5">Skills</h2> <div data-jb-field="skills">Responsibilities:<ul><li>Lead preventive and corrective maintenance (PM/CM) operations on plumbing and fire protection systems.</li><li>Troubleshoot faults, leaks, or pressure drops in domestic water, drainage, sewage, and firefighting systems.</li><li>Oversee the servicing of fire pumps, hydrants, standpipes, wet/dry risers, and sprinkler or clean-agent suppression systems.</li><li>Ensure all building operations comply with NFPA, local fire department mandates, and international plumbing codes.</li><li>Regularly audit, test, and recertify backflow preventers, fire alarms, and fire-rated barriers.</li><li>Conduct fire risk assessments and develop mitigation strategies for existing facility structures.</li><li>Supervise on-site technicians and review the performance of external maintenance contractors.</li><li>Evaluate proposed modifications or retrofits and write clear technical specifications for vendor procurement.</li><li>Candidates must be bilingual.</li><li>Should have a valid Kuwait Driving License.</li><li>Bachelor of Mechanical Engineering Degree.</li><li>Required minimum 10 years of experience in the related field. </li></ul> </div>

1 - 5 Years Naukri Gulf

Floor Man

On-site - Kuwait - Capital Governorate (Kuwait) 7 August 2026

Oil, Gas & Energy

Our Company Delivering world-class drilling services Headquartered in Al Khobar of Saudi Arabia, ADES owns and operates an elite portfolio of offshore and onshore rigs across the Middle East and Asia. We pride ourselves on providing safe, client-centric services through our world-class operational excellence programs and highly trained workforce. Our resilient business model and efficient cost structure have very well served our growth journey from humble beginnings as a single-string operation two decades ago, to the current industry-leading position as the world s largest offshore drilling service provider.Our Culture Committed to taking care of our people We take care of our people, and in turn, our people take care of our valuable clients. At ADES, you are not a number in a list; you are the one who makes a difference each and every day. Why ADES? Together towards tomorrow At ADES, we provide industry-leading service to our customers and a people-first approach to our team members. Together, we can help drive a successful tomorrow in all that we do.

Full Time 2 years Gulf Talnet

Data Center Technician II

On-site - Kuwait - Capital Governorate (Kuwait) 8 June 2026

Information Technology

<h4>Minimum qualifications:</h4> <ul> <li>Experience with performing component-level repairs and troubleshooting on technical equipment.</li> <li>Experience diagnosing and troubleshooting one of the following: operating systems, computer/server hardware, or networking protocols.</li> <li>Ability to lift/move 50lb (23kg) of equipment and ability to exert yourself physically over extended periods of time, including frequent bending, kneeling, climbing, pushing/pulling and lifting.</li> <li>Ability to work non-standard hours, including working weekends, night shifts, holidays and on shift-based schedules as required.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Bachelor's degree or equivalent practical experience.</li> <li>Completion of the online Google IT Support Professional Certificate program.</li> <li>2 years of experience diagnosing and troubleshooting one of the following: operating systems and computer/server hardware or networking protocols.</li> <li>Experience working within a data center or network operation center environment.</li> <li>Experience with performing component-level repairs and troubleshooting on IT equipment or in a similar role (e.g., Systems Administration, Network Deployment Engineer, Help Desk Technician, etc.).</li> <li>Ability to collaborate and partner with teams to overcome challenges, and to adapt to changes in a dynamic work environment.</li> </ul>

0 to 0 years Bayt

Warehouseman

On-site - Kuwait 24 July 2026

Logistics, Supply Chain & Procurement

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Long Description Job Summary Responsible to do warehouse activities for both Inbound and Outbound activities for all Businesses assigned by management. Job Responsibilities •    Receiving / Put-away / Feeding / Replenishment etc. •    Picking orders from the picking list as per the priority and standard set by management •    Placing orders into the appropriate Staging area and advising  Team Leader of any discrepancies •    Loading vehicles in the appropriate order •    Maintain highest standards of housekeeping •    Ensure damaged/exceptional products are reported to Supervisor/ Team Leader •    Ensure/Assist in the process of receiving goods accurately •    Provide assistance in stock counting •    Provide assistance in value added activities (Re-packing / Labeling etc.) •    De-stuffing & Deliveries •    When required, will assume / do other warehouse role  / activities as per Management / Superior’s requirement •    Support the Superior in achieving daily task targets set by Management   Candidate Requirements •    Able to meet Performance Standards •    Forklift driving ( Advantage) •    Health & Safety Knowledge & Adherence (including compactor operation) •    Basic Computers Skills (RF) •    Good Communication skills – able to read and write in English  •    SAP Knowledge required •    Flexible/Enthusiastic -  no issues on shifting timing •    Team Player    Education </div>

3 - 6 Years Naukri Gulf

Barista

On-site - Kuwait - Capital Governorate (Kuwait) 6 August 2026

Administration

<div> </div><div>KEY DUTIES</div><div>1. Prepare and serve hot and cold beverages: espresso, cappuccino, latte, Americano, cold brew, and specialty drinks to the highest quality standards 2. Strong knowledge of coffee beans, roasting profiles, grind sizes, and brewing techniques to deliver the perfect cup</div><div>3. Operate and maintain espresso machines, grinders, and coffee equipment efficiently and safely</div><div>4. Create latte art and maintain a high standard of beverage presentation 5. Manage the coffee station independently, ensuring speed and accuracy during peak service hours</div><div>6. Maintain a clean, organized, and hygienic work station at all times 7. Assist customers with beverage recommendations and provide</div><div>friendly, professional service</div><div>8. Monitor stock levels of coffee, milk, syrups, and supplies and report replenishment needs</div><div>9. Develop and suggest new seasonal beverages and specialty drink menus</div><div> </div><div>QUALIFICATIONS</div><div>• Education: High School Diploma or equivalent; barista certification is a strong advantage</div><div>• Experience: Minimum 5 years as a Barista in a cafe, coffee shop, or food service environment</div><div>• Industry: Experience in specialty coffee shops or international cafe chains is highly preferred</div><div>• Languages: English is a strong advantage</div><div>• Skills: Espresso machine operation; latte art skills; strong customer service skills</div><div> </div>

4 - 9 Years Naukri Gulf

Technician I Level

On-site - Kuwait - Capital Governorate (Kuwait) 3 June 2026

Engineering

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">The incumbent of this task will perform I-Level composite structural repair to aircraft parts and components and perform "on aircraft repair" to flight control surfaces.Perform structural repairs to aircraft components and parts. Perform "on aircraft repair" to flight control surfaces and aircraft skins manufactured from composite/honeycomb cured materials. Materials include, but are not limited to, graphite epoxy, Kevlar, fiberglass, aramid and titanium. Perform aircraft component modifications. Assist I Level Structures and Tire Shop when not engaged in composite repairs. Support OJT and cross training of KAF personnel.</div></section><section>Desired Candidate Profile<ul><li>Minimum of four (4) years of experience at an I-Level airframe repair shop or a depot level structural repair facility, and three (3) years experience in composite repair techniques.</li><li>Must have the following: Corrosion control course with knowledge of corrosion identification and treatment.</li><li>A formal composite repair school, and have knowledge of the operation of composite repair temp/vacuum repair sets, the application of composite adhesives, and the special tools required for composite repair.</li><li>Ability to read and interpret blueprints.</li><li>USAF, USN, USMC, Kuwaiti, Canadian and Australian Air Force experience is also applicable to these tasks.</li><li>No security clearance required.</li></ul></section>

0 to 0 years Bayt

Assistant Outlet Manager

On-site - Kuwait 6 July 2026

Hospitality & Tourism

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About Four Seasons: Four Seasons is powered by our people. We are a collective of individuals who crave to become better, to push ourselves to new heights and to treat each other as we wish to be treated in return. Our team members around the world create amazing experiences for our guests, residents, and partners through a commitment to luxury with genuine heart. We know that the best way to enable our people to deliver these exceptional guest experiences is through a world-class employee experience and company culture. At Four Seasons, we believe in recognizing a familiar face, welcoming a new one and treating everyone we meet the way we would want to be treated ourselves. Whether you work with us, stay with us, live with us or discover with us, we believe our purpose is to create impressions that will stay with you for a lifetime. It comes from our belief that life is richer when we truly connect to the people and the world around us. About the location: A resort-like sanctuary in Kuwait’s heart. Discover a modern urban sanctuary in the heart of Kuwait City: a contemporary curation of Middle Eastern architecture, dazzling art and resort-like spaciousness, where striking sculptures seamlessly merge with traditional design. In this enclave of wonder – the first and only hotel in Kuwait to receive the prestigious Forbes Five-Star rating – you’ll find soaring rooftop restaurants, leisure facilities and the city’s largest guest rooms. Catch up with friends in the chic surrounds of Al Soor (known as La Chocolaterie of Kuwait), relax in air-conditioned cabanas by the infinity pool, ascend to a buzzing rooftop and wander the lush adjacent parkland. And with the city’s malls and souks within a few minutes’ drive, you can experience all the spoils of the city without spoiling your precious relaxation time. What You Will Do <ul><li>Select, train, evaluate, plan schedules and ensure high employee performance, motivate, coach, and discipline all employees in the Hotel’s Li Beirut (authentic Lebanese cuisine) Restaurant to ensure that established cultural and core standards are met. </li><li>Manage the Restaurant Dining operation as well as the Private Bar activities and its respective employees. </li><li>Control labor and operating expenses through effective scheduling, budgeting, purchasing decisions, and inventory and cash control. </li><li>Be visible in the operation, provide recognition, promote good public relations, and handle complaints, concerns or special requests for guests, clients, and group contacts. </li><li>Attend regular operational meetings to ensure effective coordination and cooperation between departments </li></ul> What You Bring <ul><li>Minimum 3 years of previous experience in similar role in a five-star luxury hotel or high end Lebanese restaurant in the Middle East. </li><li>Must have fluent level of English & Arabic languages both written and spoken. </li><li>Excellent organizational and time management skills </li><li>Ability to multitask and prioritize daily workload </li></ul> What We Offer <ul><li>Full board single living accommodation in a high quality, well-resourced accommodation with Wi-Fi internet. </li><li>Complimentary nights at FS Hotels worldwide. </li><li>Regular social and sporting events </li><li>Paid home leave tickets </li><li>Free transportation to and from work with Wi-Fi internet. </li><li>Full medical coverage </li></ul> Work Authorization Hotel will apply for the work authorization for the successful candidate We look forward to receiving your application! </div>

0 to 0 years Naukri Gulf

Aircraft Mechanic

On-site - Kuwait - Capital Governorate (Kuwait) 12 June 2026

Engineering

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">The C-12/King Air Army Transport Aircraft Mechanic (FAA A&P) services, repairs and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components.Operationally checks repaired or modified systems for proper operation.Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment.Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.Examine engines for oil leaks and listens to operating engine to detect and diagnose malfunctions. Inspect turbine blades to detect cracks or breaks.Test engine operation, using troubleshooting procedures and diagnostic test equipment, to identify source of malfunction.Replace or repair worn or damaged components using hand tools, gauges, and test equipment. Remove and install engine from aircraft.Disassemble and inspect parts for wear, warping, or other defects.Repair or replace defective engine parts and reassembles and installs engine in aircraft.Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition.Knowledge of aircraft sub-systems, including maintenance parameter, systems operation, limitations, and technical orders.Ability to become qualified and perform engine runs for the aircraft type they are assigned to support.Ability to read, write, and interpret technical duties is required.Ability to communicate effectively with all levels of employees throughout the organization.May specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies.Perform other qualified duties as assigned.Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.Must be able to climb stairs, ramps, ladders and work stands.Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.May be required to carry, push or pull up to and may exceed 50 pounds.May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet.May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.Must be able to type using a standard keyboard to communicate through e-mail and various software applications.Must be able to distinguish color and judge three dimensional depths.May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.Must have minimum 20/100 near and far vision, correctable to 20/20.Must be capable of living and working in a potentially hostile environment for an extended period.May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</div></section><section>Desired Candidate ProfileA valid (FAA) A&P Airframe and Powerplant Certificate is Required.Seven (7) years experience as an (A&P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required.US Citizenship is Required to obtain a US Govt Secret Security Clearance, and for facility access.Minimum RequirementsHigh school diploma or GED equivalent is Required.A valid (FAA) A&P Certificate is Required.Seven (7) years experience as an (A&P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required.Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.Recent full-time experience in aviation maintenance, on the C-12/King Air Turbo-prop aircraft during the past 12 months is Required.Six (6) months of flight line and overhaul & inspection experience is preferred.Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.Mechanic Tools/Toolbox Required; mechanics must provide their own shadowed toolbox with each tool etched with PID. *(Company will ship toolbox to Kuwait).A valid US Passport - is Required for deployment/travel to Kuwait; Passport must have a minimum of 18 months remaining before expiration date, must be able to obtain Kuwait Visa.Must be able to pass and clear CENTCOM (CRC) Deployment Training and Army MOD17 Medical for Deployment. Ability to clear the Army MOD 17 Medical is required for Deployment to Kuwait, will occur while attending CRC (DIDC) deployment training.May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations. (AR95-20)Mechanic Pre-employment Medical Requirements:Medical/Physical. All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years.Security Clearance Requirements:Must be able to obtain and maintain a US Govt Secret Security Clearance. Must be able to obtain and maintain facility credentials and authorization. US Citizenship is Required to hold a US Govt Secret Clearance, and facility credentials and authorization to work at this facility.</section>

0 to 0 years Naukri Gulf

RPA Aircraft Mechanic I/Deployment Pool

On-site - Kuwait - Capital Governorate (Kuwait) 2 June 2026

Engineering

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship. USAF equivalent position is Aircraft Mechanic Apprentice. Essential Responsibilities: Performs all daily launch/recovery duties in support of operational requirements. Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems. Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion. Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools. Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs. Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft. Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks. May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Must be able to work with little-to-no supervision. Performs all other duties as assigned as requested.</div></section><section>Desired Candidate ProfileMust have High school diploma or have completed relevant military and/or vocational technical school curriculum. Minimum of one year of actual Aircraft Mechanic maintenance experience required. Must have basic knowledge of basic and complex mechanical maintenance and repair. Must possess basic knowledge of technical publications related to aircraft mechanical maintenance. Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems. Must be able to inspect and operate ground support and auxiliary equipment. Must achieve a passing grade in all required courses/certifications for continued employment, as needed. Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment. Must be able to Deploy to Forward Locations (other countries) as Directed by the Government Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods. Must be able to speak, read, write, and understand English. Must submit updated SF-86 within 30 days of hire start date. Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance. Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment. Must have current/active State Issued Driver s License. Must be able to acquire and maintain a valid flight-line Government Driver s License. Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages. Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.Associate degree in a relevant career field. Licensed by the FAA as an Airframe and Powerplant Mechanic. RPA Deployment Experience. Prior Experience as a Defense Contractor. Aircraft Mechanic Experience within the last 10 years. MQ-9 Experience as an Aircraft Mechanic. MQ-9 Aircraft Composite Repair / Replacement Experience.</section>

Bayt

Coating Advisor

On-site - Kuwait 11 August 2026

Technical & Labor

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> SUMMARY OF THE ROLE As Coating Advisor in the Technical Team, you will provide professional technical advice to our customers, by on-site support on paint application and inspections to ensure that the coating specification is met, and the job is completed according to the contract and the customer’s satisfaction. This position is based in Kuwait and reports to the Technical Service Manager.Responsibilities:  <ul><li>Provide clear, practical guidance to customers and relevant Jotun teams on coating application, working directly on site with client representatives to ensure specifications and customer expectations are met.</li><li>Independently carry out inspections on assigned projects in line with the Inspection and Test Plan (ITP), relevant procedures, and agreed specifications.</li><li>Identify and follow up on coating application requirements, ensuring work is carried out according to the approved specification and quality standards.</li><li>Compile inspection findings and prepare accurate reports to document compliance with project requirements and inspection criteria.</li><li>Work closely with customers, applicators, and relevant Jotun colleagues to address coating-related matters and support successful project execution.</li><li>Represent Jotun professionally on site and contribute to strong customer relationships through technical expertise and practical support.</li></ul>Qualifications: <ul><li>Relevant previous experience as a Coating Advisor is preferred, with experience across both Marine and Protective segments considered an advantage.</li><li>Offshore experience is preferred.</li><li>NACE Level II or FROSIO Level III certification is required as a minimum.</li><li>Good English proficiency is required.</li></ul>WHAT WE ARE LOOKING FOR AND WHAT WE OFFER We look for someone who: <ul><li>Uses a methodical and systematic approach; plans ahead, defines clear priorities and allocates resources effectively</li><li>Builds a useful network of contacts and relationships and utilizes it to achieve objectives.</li><li>Communicates in a clear, precise and structured way; speaks with authority and conviction; presents effectively.</li><li>Identifies and seizes commercial opportunities; has a strong positive impact on business growth and profitability.</li><li>Adheres to company rules and procedures; executes plans with commitment and determination; achieves high quality results.</li><li>Demonstrates specialist knowledge and expertise in own area; participates in continuous professional development.</li></ul>We Offer: <ul><li>Competitive compensation and benefits.</li><li>Continuous learning opportunities and training activities through on-the-job training and our in-house learning Jotun Academy.</li><li>Career development opportunities across multiple disciplines and geographies.</li><li>Leaders who focus on engaging and enabling their team, proven by consistently high employee feedback scores.</li><li>A supportive and inclusive company culture where you can be your authentic self.</li><li>A focus on having fun together through team buildings and social activities.</li></ul> POSITION INFORMATION Company: Jotun U.A.E. Ltd. (L.L.C.) Contract Type: RegularTime Type: Full timeCLOSING DATE (dd.mm.yyyy): 23.08.2026WHO WE ARE Jotun’s story in the MEIA region (Middle East, India and Africa) began in 1962, and has grown to include 18 legal entities committed to achieving success and growth of the Jotun Group. Throughout our history, we have focused on providing our employees with meaningful and challenging work, rewarding them through continued learning and development, underpinned by our values of Loyalty, Care, Respect and Boldness.Jotun U.A.E. Ltd. (LLC), established in 1974, is one of the key markets within the MEIA region. Jotun’s business in the countries of Bahrain and Kuwait are also part of Jotun U.A.E. Ltd. and function as its branches. With a production facility, 3 warehouses and more than 400 employees, we aim to further strengthen Jotun’s position in the region through ambitious market growth plans that focus on innovation, efficiency and profitability.Visit our Career Page to know more about life at Jotun. Jotun’s company culture welcomes and values differences in people. Our more than 10,200 employees on all continents represent 90 nationalities, four generations and diversity of professions, gender, abilities, ethnicities, beliefs, cultures etc. We are committed to represent the societies we operate in, promoting equality, equity and zero-tolerance for discrimination. If you are applying to a position and require any additional support in the interview process, please let us know how we can accommodate this.   If you think that this role is what you could be doing next, apply now! </div>

Bayt

Instrument & Control Engineer

On-site - Kuwait 30 July 2026

Legal

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Description We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of Instrument & Control Engineer in Kuwait. Our client is a reputed organization in the Power Generation sector seeking skilled and motivated professionals. If you meet the requirements below, apply early as positions are limited. Key Responsibilities <ul><li>Maintain and troubleshoot instrumentation systems in a large-scale power plant. </li><li>Calibrate field instruments and transmitters. </li><li>Monitor and maintain DCS and PLC control systems. </li><li>Diagnose instrumentation faults and ensure minimal downtime. </li><li>Perform preventive and corrective maintenance activities. </li><li>Ensure compliance with plant safety standards. </li><li>Coordinate with electrical and mechanical maintenance teams. </li><li>Prepare maintenance reports and documentation. </li></ul>Required Skills <ul><li>Power Plant Instrumentation </li><li>DCS Operation & Troubleshooting </li><li>PLC Systems </li><li>Instrument Calibration </li><li>Preventive & Breakdown Maintenance </li></ul>Preferred Skills <ul><li>Commissioning experience </li><li>Root Cause Analysis </li><li>SAP Maintenance Module </li></ul>Work Experience Requirements Candidates must possess a minimum of 10 years of experience in instrumentation within a large-scale power plant environment. Experience in DCS, PLC systems, calibration, and plant maintenance is essential. Education <ul><li>Minimum: B.E. Instrumentation & Control Engineering </li><li>Preferred: M.E./Relevant Technical Certification </li><li>Additional Certifications: Instrumentation, PLC/DCS Training (preferred) </li></ul>Contact Number - 9786888866 </div>

Operation Specialist Jobs in Kuwait

Junior Red Switch Technician

Network Manager II

Senior Electrician

Lead Pest Controller

Pest Management Supervisor

Lead Pest Controller

General Electrician

Electrical Superintendent

Roustabout

Mechanical Engineer

Floor Man

Data Center Technician II

Warehouseman

Barista

Technician I Level

Assistant Outlet Manager

Aircraft Mechanic

RPA Aircraft Mechanic I/Deployment Pool

Coating Advisor

Instrument & Control Engineer

Site Owners

Employers

Job Seekers

Operation Specialist Jobs in Kuwait

Receive email alerts for Operation Specialist Jobs in Kuwait jobs