Heavy equipment mechanical engineer Jobs

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Red Switch Technician I will be required to operate and maintain the DRSN facility in accordance with Defense Information Systems Agency (DISA) Regulations and guidelines. Responsible for organizing and implementing system and office upgrades with Raytheon, DISA and local offices. Prepare and maintain DRSN facility in accordance with various agency checklist requirements such as Quality Control (QC), DRSN Security, DISA Performance Evaluation (PE), Communications Security (COMSEC), etc. Responsible for ensuring subscribers are trained on the features and capabilities of their phone instruments and are operating their DRSN phones within the prescribed security requirements. Reports to Red Switch Supervisor. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver’s license in order to be qualified for this position. Responsibilities + Operation and Maintenance (O&amp;M) of the Digital Small Switch DSS-2A Monitor trunk and circuit outages as well as the administrative terminal and Enhanced Command Console (ECC). + Perform direct trunk dialing checks over trunk channels associated with the switch to ensure satisfactory operation of voice circuits (at least once each shift and following any trunk failure). + Perform Preventive Maintenance Inspections (PMIs) on the switch and peripheral equipment. + Conduct systems checks every 2 hours. + Create and update databases in the administrative terminal using information received from users, Raytheon, and DISA. + Perform database backups to CD-R discs. + Perform database downloads to update switch configurations. + Update and print out telephone console information and line strips for users. + Fabricate custom interface cables using hand tools and wiring diagrams. + Escort individuals requiring access to the Red Switch in the performance of their duties. + Ensure that all outages are reported in a timely manner to the DISA GNOSC, NOC-K, TCF, V2X management for tracking in Army Enterprise Service Management Platform (AESMP) ticketing system. + Provide hourly status updates to designated agencies regarding outages, etc. + Annotate all activities in the Master Station Log (MSL) database. + Prepare call detail history reports for DISA and military personnel as directed. + Contribute to weekly reports with regard to your additional duties and other assigned tasks. + Complete individual timesheets on a daily basis. + Check the Regional Cyber Center (RCC) website for accuracy regarding authorized service interruptions (ASIs) and outages. + Initiate Quality Control checklists as they pertain to your additional duties. + Update training records as needed. + Update memorandums and technical drawings (including block diagrams and schematics) as directed. + Inventory Communications Security (COMSEC) equipment and document DA Form 2653-R (each shift). + Work with military technical monitor(s), Special Security Office (SSO) and other Department of Defense contractors and civilians including local hires in support of the DRSN mission. + Interface with technicians from Outside Plant, DPW, FMO etc. regarding installations in support of the DRSN mission. + Coordinate with the Raytheon Help Desk for troubleshooting problems that cannot be resolved locally. + Contact the Return Merchandise Authorization (RMA) Help Desk in order to obtain an RMA for processing Depot equipment repairs. + Performs other duties and assignments as required. Qualifications + Qualifications + Security Clearance: + Active Top Secret SSBI within the past two years. + Individual must be eligible for Sensitive Compartmentalized Information (SCI) Access. + Education / Certifications: One year of related experience may be substituted for one year of education, if a degree is required. + High School Diploma required. + Bachelor’s Degree in IT or related field preferred. + Cardiopulmonary Resuscitation (CPR) (Provided by contract) + Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree. + Seven years’ experience in Communications-Electronics Maintenance functions: + installation, troubleshooting and repair of electronic communications equipment. + Use of phone + Digital sender, and desktop computer in a fast-paced office environment is desirable. + A working knowledge of Microsoft Office software is required. Must be able to work rotating shift schedules which provide 24-hour day/7-day week coverage. + Military or civilian technical training course of six (6) months or more is required. + This should be followed by a minimum of 24 months of on-the-job training (OJT). + A certificate of completion will suffice until verification of the training on your DD-214 can be completed. + Experience with a customer service-oriented company At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Inspect, repair, and maintain HVAC, air quality control, and refrigeration equipment. Maintain and conduct daily inspections of the mechanical plant. Monitor and control property temperature. Monitor and analyze energy and utilities usage. Calibrate all controls, gauges, meters, and other equipment. Assemble, install, test, repair, and maintain electrical systems or electronic wiring. Assemble, install, and maintain pipe assemblies, fittings, valves, etc. Perform routine pool and spa maintenance.<br>Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards and anticipate and address guests’ service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Reach overhead and below the knees. Move in confined or elevated spaces. Move over sloping, uneven, or slippery surfaces. Move up and down stairs, service ramps and/or a ladder. Grasp, turn, and manipulate objects of varying size and weight. Assist with moving, lifting, carrying, and placing of objects weighing in excess of 100 pounds. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.<br>PREFERRED QUALIFICATIONS&nbsp;<br>Education: Technical, Trade, or Vocational School Degree.<br>Related Work Experience: At least 3 years of related work experience.<br>Supervisory Experience: No supervisory experience.<br>REQUIRED QUALIFICATIONS<br>License or Certification: EPA Universal Certification<br>Driver's License<br>HVAC Certification<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>The world is a big place and Marriott Executive Apartments offers temporary housing that feels like home in the biggest and best cities for business travel across Europe, Asia, Latin America, Africa and the Middle East. Join the Marriott Executive Apartments team and help our guests adapt to a new locale and feel comfortable and cared for while living away from home. In joining Marriott Executive Apartments, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<p><h4>Position summary</h4> <p>Inspect, repair, and maintain laundry, HVAC, air quality control, and refrigeration equipment. Maintain and conduct daily inspections of the mechanical plant. Monitor and control property temperature. Monitor and analyze energy and utilities usage. Calibrate all controls, gauges, meters, and other equipment. Assemble, install, test, repair, and maintain electrical systems or electronic wiring. Assemble, install, and maintain pipe assemblies, fittings, valves, etc. Perform routine pool and spa maintenance.</p> <p>Follow all company and safety and security policies and procedures; report maintenance problems, safety hazards, accidents, or injuries; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards and anticipate and address guests’ service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings.</p> <p>Reach overhead and below the knees. Move in confined or elevated spaces. Move over sloping, uneven, or slippery surfaces. Move up and down stairs, service ramps, and/or a ladder. Grasp, turn, and manipulate objects of varying size and weight. Assist with moving, lifting, carrying, and placing of objects weighing in excess of 100 pounds. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Perform other reasonable job duties as requested by supervisors.</p> <h4>Preferred qualifications</h4> <p><strong>Education:</strong> Technical, trade, or vocational school degree.</p> <p><strong>Related work experience:</strong> At least 3 years of related work experience.</p> <p><strong>Supervisory experience:</strong> No supervisory experience.</p> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>Combining timeless glamour with a vanguard spirit, St. Regis Hotels & Resorts is committed to delivering exquisite experiences at more than 50 luxury hotels and resorts in the best addresses around the world. Beginning with the debut of The St. Regis hotel in New York by John Jacob Astor IV at the dawn of the twentieth century, the brand has remained committed to an uncompromising level of bespoke and anticipatory service for all of its guests, delivered flawlessly by a team of gracious hosts that combine classic sophistication and modern sensibility, as well as our signature Butler Service.</p> <p>We invite you to explore careers at St. Regis. In joining St. Regis, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p></p><p></p>

<p>Provide day-to-day onsite IT support for Landmark Hospitality offices and sites. Handle incidents and service requests through the ITSM/ticketing tool. Troubleshoot desktops, laptops, printers, phones, POS, network, Wi-Fi, and other IT devices. Support user onboarding, device setup, password reset, account unlock, and access-related requests. Provide Level 1 SOP-based support for business applications and escalate to the application/vendor team when required. Coordinate with third-party vendors for application, infrastructure, ISP, hardware, and AMC-related issues. Support basic server, network, firewall, VPN, and connectivity checks with remote teams. Assist in endpoint security, patching, vulnerability remediation, and IT audit activities. Maintain proper ticket updates, closure notes, asset details, and daily support status. Support P1/P2 incidents with immediate coordination and timely escalation. Ensure SLA compliance, user satisfaction, and quality communication.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum 5+ years of IT support experience preferred. Engineer with valid Driving License and Car is required.</p>

<p>Manage all contractual and commercial matters on a major Kuwait infrastructure project. Lead negotiations with the client, engineer, subcontractors and suppliers. Prepare and negotiate EOT, prolongation, disruption and variation claims. Administer the main contract and all subcontract agreements throughout delivery. Review and certify subcontractor payment applications and final accounts. Support dispute avoidance and resolution, including arbitration where required. Maintain claims registers, variation registers and contractual records. Support final account negotiation and contract close-out.</p><p><strong>Desired Candidate Profile</strong></p><p>10-15 years as a Contracts Manager with a Class 1 main contractor or claims consultancy. Experience handling sizable projects in the UAE. Strong working knowledge of FIDIC 1999/2017 contract conditions. Hands-on experience preparing EOT, variation and claims submissions. Bachelor's degree in Civil Engineering. Kuwait or wider GCC experience is an advantage. Litigation or arbitration dispute experience is an advantage. Relevant infrastructure or utilities project background is an advantage. MRICS, MCIArb or Certified FIDIC Contract Manager status is an advantage. Fluent English; Arabic language skills are an advantage.</p>

<p>Our client, a leading organization in the oil and gas sector, is seeking an experienced Civil Design Engineer to support critical TA26 projects at their PIC facility in Shuaiba, Kuwait. This temporary position plays a key role in delivering effective and efficient civil engineering design solutions that enhance plant output, performance and reliability within a demanding petrochemical environment.</p><p>Core Responsibilities</p><p>Provide robust civil engineering designs and solutions for TA26 projects, ensuring structural integrity, safety and durability of plant-related infrastructure.</p><p>Optimize civil designs to support maximum plant output and performance while aligning with technical, safety and operational standards.</p><p><strong>Desired Candidate Profile</strong></p><p>8-15 years of total experience in civil engineering, including a minimum of 8 years of hands on Design Engineering within the Oil &amp; Gas / Petrochemical industry. You will bring deep familiarity with industry standards, plant conditions and project execution in complex brownfield environments.</p><p>Bachelor's Degree in Civil Engineering, approved by the Kuwait Society of Engineers, ensuring compliance with local professional and regulatory requirements.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Electronica for Electrical Appliances is a Kuwait-based company providing integrated solutions across Electrical Appliances and Renewable Energy, with a focus on reliable products, professional engineering, and technical support.</p><p>Electronica is seeking a <b>Solar Energy Engineer</b> to join its team in Kuwait.</p><p><br></p><p><b>Key Responsibilities</b></p><p><br></p><ul><li>Design solar power systems for residential, commercial, and industrial projects.</li><li>Prepare technical drawings and engineering documentation.</li><li>Select appropriate system components, including solar panels, inverters, cables, and protection systems.</li><li>Integrate solar power systems with energy storage solutions such as batteries.</li><li>Supervise installation works and ensure high-quality execution.</li><li>Conduct system testing and commissioning to ensure operational readiness.</li><li>Monitor system performance and analyze energy production.</li><li>Coordinate with technical teams, contractors, and suppliers.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Bachelor’s degree in Renewable Energy Engineering, Electrical Engineering, or a related engineering field.</li><li><b>Minimum 2 years of experience</b> in the solar energy sector.</li><li>Good knowledge of engineering design software.</li><li>Strong understanding of electrical systems and safety standards.</li><li>Ability to manage projects and work effectively within a team.</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Job Summary:</b></p><p>The Cost Control Engineer will be responsible for monitoring and controlling project and company operational costs to support effective financial and commercial management. Duties include tracking expenditures, analyzing cost data, monitoring budgets, preparing cost reports and forecasts, and coordinating with project teams and internal departments on cost-related matters. The role requires strong analytical and numerical skills, knowledge of cost control principles, attention to detail, proficiency in reporting tools, and effective communication and coordination skills.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Qualifications:</b></p><ul><li>Bachelor’s Degree in Engineering or a related discipline</li><li>Minimum of 5 years of relevant experience in cost control, cost management, and project financial monitoring, preferably within the construction, engineering, or oil &amp; gas industry.</li><li>Proficient in cost estimation, budget monitoring, cost reporting, WBS development and costing, expenditure tracking, forecasting, and variance analysis.</li><li>Demonstrates strong analytical and numerical skills, attention to detail, effective communication, coordination, problem-solving, and the ability to work with project teams and internal departments.</li><li>• Must be available in Kuwait with valid transferrable visa</li></ul></div>

<p><br></p><p>Reports to the TLSF Manager. Responsible for the full spectrum of maintenance operations; oversee Go/No-Go Testing of all government furnished equipment retrograded from the forward deployed sites for redistribution. Manages refurbishment programs for deep cleaning, upgrade, repair and configuration of IGX and other electronic systems. Directs and supervises Maintenance Support Teams (MST) supporting communication towers, telephony switching systems, and other communication systems. Manage field and sustainment maintenance to all strategic communications systems under the command of the 160th Signal Brigade, its subordinate units and the RCC. Monitors production for compliance with scheduling directives, cost factors, and standards. Develops performance standards, conducts employee counseling, and makes suggestions for formal and informal performance appraisals. Manages the calibration of Government Furnished Property (GFP) test equipment assigned to the Program. Directs, controls, and supervises antenna and tower maintenance in their respective countries, or areas they may be deployed too. Plans and coordinates scheduled maintenance visits for antenna/towers as required. Responsible for providing trip reports to the TLSF Manager as work is performed and completed. Performs a variety of duties pertaining to the operation, maintenance and repair of antennas and associated mounting hardware, tower systems, waveguide, lighting equipment and grounding systems. Will be responsible for accountability of Government Furnished Property (GFP) in their possession or under their control.</p><p>Program: OMDAC-SWACA</p><p>This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position.</p><p>Responsibilities</p><p>Provides guidance and mentoring to personnel assigned to the section. Processes Purchase Requests required to support daily maintenance operations. Reviews receipt, control and processing of work orders. Collects and analyzes data necessary to manage resources. Monitors material stock level to support maintenance activities. Advises the Program Management of the status of work orders and scheduling of maintenance schedule. May be required to prepare and present briefs on maintenance-related activities. Maintains situational awareness of logistics and maintenance activities at all operational sites, including the status of any operational, maintenance, and resource issues, including the glide path for the resolution of any of these issues. Manage and monitor the Test, Measurement and Diagnostic Equipment (TMDE) Repair and Calibration program. Ensures obligations are being fulfilled as per the Performance Work Statement (PWS). Monitors staffing levels and creates projections to ensure proper manning is maintained in all situations; to include adequate coverage during vacation/holiday periods and for replacement of personnel who are projected to depart. Provides direct communication and coordination with associated military counterparts (such as Brigade S-4 and S-3) to facilitate mission support. Establishes rapport and effectively maintains liaison and coordination between the working elements of the department, management, customers and staff. Help develop best/alternative solutions to maintain smooth operations. Will work with and in conjunction with other departmental sections to accomplish all required taskings. Supervises and directs the Antenna Maintenance Support Team (AMST) in the performance of on-site and off-site routine and emergency maintenance support on towers, antennas, transmission lines and associated equipment. Perform quality assurance/quality control inspections on work performed. Performs organizational level repair maintenance through off-site general Support maintenance of support equipment including disassembly, testing, fault isolation and piece part replacement. Also performs technical inspections to determine maintenance requirements and approximate repair costs. Coordinates with sites and Operations and Maintenance staff in scheduled/unscheduled maintenance to ensure maximum system availability is maintained. Conducts, attends, and prepares for meetings and briefings as required. Performs other duties and assignments assigned.</p><p><b>Qualifications</b></p><p>Security Clearance: Ability to obtain a National Agency Check with Inquires (NACI) in order to obtain a Common Access Card (CAC). Ability to obtain and maintain a Secret level security clearance is preferred.</p><p>Education / Certifications:</p><p>One-year related experience may be substituted for one year of education if a degree is required. High School diploma or GED required. Cardiopulmonary Resuscitation (CPR) Training &amp; Certification ( Provided by the contract. ) Tower training: Tower Safety &amp; Rescue; Height &amp; Harness Safety Course or equivalent Requires a training certificate which meets one of the following requirements: OSHA 1910 ( Fall Protection Requirements ) OSHA 1926 ( Fall Protection Requirements ) ANSI/ASSE Z359</p><p>Experience:</p><p>One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience. Experience with a customer service-oriented company. 3-5 years of supervisory preferred. Must have knowledge and comply with OSHA 29 CFR Standard 1PHONE_NUMBER for all tower and antenna work. Must have the ability to comprehend and interpret complex technical data. Must have familiarity with logistical, maintenance, and purchasing operations. Must be familiar with maintenance operations, transportation, logistical, supply and services, military operations. Experience with a customer service-oriented company.</p><p>Skills &amp; Technology Used:</p><p>Proficiency in using a computer - desktop or laptop. Proficiency in using Microsoft productivity software. Proficiency in using Email client software. Other software / work management tools as directed Harness and fall protection equipment</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Ability to obtain a National Agency Check with Inquires (NACI) in order to obtain a Common Access Card (CAC).</li><li>Ability to obtain and maintain a Secret level security clearance is preferred.</li><li>High School diploma or GED required.</li><li>Cardiopulmonary Resuscitation (CPR) Training &amp; Certification ( Provided by the contract. )</li><li>Tower training: Tower Safety &amp; Rescue; Height &amp; Harness Safety Course or equivalent</li><li>Requires a training certificate which meets one of the following requirements: OSHA 1910 ( Fall Protection Requirements ) OSHA 1926 ( Fall Protection Requirements ) ANSI/ASSE Z359</li><li>One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience.</li><li>Experience with a customer service-oriented company.</li><li>3-5 years of supervisory preferred.</li><li>Must have knowledge and comply with OSHA 29 CFR Standard 1PHONE_NUMBER for all tower and antenna work.</li><li>Must have the ability to comprehend and interpret complex technical data.</li><li>Must have familiarity with logistical, maintenance, and purchasing operations.</li><li>Must be familiar with maintenance operations, transportation, logistical, supply and services, military operations.</li><li>Proficiency in using a computer - desktop or laptop.</li><li>Proficiency in using Microsoft productivity software.</li><li>Proficiency in using Email client software.</li><li>Other software / work management tools as directed</li><li>Harness and fall protection equipment</li><li>Must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position.</li></ul>

<p>We are hiring experienced Junior Sous Chef for a reputed restaurant group in Kuwait. Key Responsibilities Assist the Sous Chef and Head Chef in daily kitchen operations Supervise and guide kitchen staff during food preparation and service Ensure food is prepared and presented according to restaurant standards Monitor portion control, food quality, and consistency Maintain cleanliness, hygiene, and food safety standards in the kitchen Support inventory control, stock rotation, and minimizing food wastage Ensure proper storage and handling of food products Coordinate with other kitchen sections for smooth operations Train and mentor junior kitchen staff and commis chefs Assist in menu preparation and recipe standardization Ensure kitchen equipment is properly used and maintained Handle kitchen operations effectively during the absence of the Sous Chef Job Location : Qatar &amp; Kuwait Benefits: Attractive Salary Accommodation &amp; Transportation Provided</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma or certification in Culinary Arts or Hospitality preferred 4 6 years of experience in restaurant or hotel kitchens Previous experience as Demi Chef De Partie or similar role preferred Strong knowledge of international cuisine, food preparation, and plating Ability to work under pressure in a fast-paced environment Good leadership, communication, and team management skills Knowledge of food safety and HACCP standards</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job Description <br></p><br><p>We are hiring experienced <strong>Junior Sous Chef</strong> for a reputed restaurant group in Kuwait.</p><br><br><br>Key Responsibilities<p>. Assist the Sous Chef and Head Chef in daily kitchen operations</p><br><br><p>. Supervise and guide kitchen staff during food preparation and service</p><br><br><p>. Ensure food is prepared and presented according to restaurant standards</p><br><br><p>. Monitor portion control, food quality, and consistency</p><br><br><p>. Maintain cleanliness, hygiene, and food safety standards in the kitchen</p><br><br><p>. Support inventory control, stock rotation, and minimizing food wastage</p><br><br><p>. Ensure proper storage and handling of food products</p><br><br><p>. Coordinate with other kitchen sections for smooth operations</p><br><br><p>. Train and mentor junior kitchen staff and commis chefs</p><br><br><p>. Assist in menu preparation and recipe standardization</p><br><br><p>. Ensure kitchen equipment is properly used and maintained</p><br><br><p>. Handle kitchen operations effectively during the absence of the Sous Chef</p><br><br><br><p><strong>Job Location : Qatar &amp; Kuwait</strong></p><br><br><br><p> <strong>Benefits:</strong></p><br><br><p>✔ Attractive Salary</p><br><br><p>✔ Accommodation &amp; Transportation Provided</p><br><br><br><br>Requirements <br><p>. Diploma or certification in Culinary Arts or Hospitality preferred</p><br><br><p>. 4-6 years of experience in restaurant or hotel kitchens</p><br><br><p>. Previous experience as Demi Chef De Partie or similar role preferred</p><br><br><p>. Strong knowledge of international cuisine, food preparation, and plating</p><br><br><p>. Ability to work under pressure in a fast-paced environment</p><br><br><p>. Good leadership, communication, and team management skills</p><br><br><p>. Knowledge of food safety and HACCP standards</p><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Kuwait in support of WEXMAC*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Quality Auditor II is responsible for performance monitoring of program functional areas. Quality Auditor II independently performs audit surveillances of Program internal procedures, Statements of Work (SOW), and other governing documents to ensure compliance and continuous improvement of processes. Responsibilities also include gathering and analyzing data and recommending courses of action to improve performance or resolve problems. This position will report to the Quality Manager, Lead, or designee. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Conducts high volume of both scheduled and unscheduled audit/surveillances and preparing accompanying reports on a continuous basis in functional or operational areas as assigned; frequent travel to offsite military bases and local Kuwait commercial establishments as required. + Monitors program functions for compliance with the PWS &amp; ISO 9001:2015 Quality Management System (QMS). + Assists in root cause analysis and development of corrective/preventive action plans as required; performs follow up audits and Correction Action Report (CAR) verifications to determine completeness and effectiveness of corrective/preventive actions. + Minimum typing level of 40 wpm + Provides mentorship to Quality Auditor I. + Other duties as assigned. Qualifications Education/Certifications: + + Education/Certifications: Two years related experience may be substituted for one year of education, if degree is required. + High School Diploma; ISO 9001: 2015 Auditor certification (or able to obtain within 90 days). + Must possess and maintain a valid driver’s license from country of origin for the purpose of obtaining and maintaining a valid military or Kuwait Driver’s License. Experience: + + Minimum of five (5) years in Contracting / DOD environment + Minimum of three (3) to five (5) years auditing experience + Must have advanced knowledge of ISO 9001:2015; and working familiarity with FAR, DoD and Army Regulations (AR), and Army Technical Bulletins (TB), and Technical Manuals (TM). Skills + + Candidate must be able to work under pressure, manage multiple assignments simultaneously, and have excellent interpersonal skills + Candidate must possess be able to think logically and have some expertise in reviewing and understanding contractual documents such as Performance Work Statement (PWS), Statements of Work (SOW) and Quality Management System (QMS). + Must have basic experience with all Microsoft office products, such as excel, word, power point and database management. Supervisory Responsibilities + + May fill in as a Quality Lead as necessary. Working Conditions: + + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, duty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. Physical Requirements: + + Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. If the use of arm and/or leg controls requires exertion of forces greater than that for sedentary work and the worker sits most of the time, the job is rated for light work. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p>Carry out general activities related to lifting, rigging &amp; slinging of all loads lifted and moved by cranes and other lifting equipment, housekeeping, chipping, painting and repair of equipment in a proper &amp; timely manner to ensure a safe &amp; efficient operation.</p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>General duties:</strong> Performs general duties in such a manner which results in achieving the operating plan and objectives set forth by the Driller and STP that includes Safety, operating expectation and rig appearance and housekeeping. Assists other rig departments such as the drilling crew on rig floor, welder, Maintenance Team, etc.</p><p><strong>Lifting Operations:</strong> Hook on loads for the crane and forklift operators and act as a banksman when required. Assist crane and forklift operators in off-loading and loading all drilling materials and supplies as required. Comply and apply safe rigging &amp; slinging practices, from pre-lift requirements, wire inspections, correct use of taglines, proper use of hands-free tools and body placements, and the use of verbal and hand signaling methods.</p><p><strong>Rig Move:</strong> Carry out relevant duties and activities to prepare for rig moves as directed by the Driller.</p><p><strong>Drilling / Work-over Operations:</strong> Assists in operations for preparing drilling mud activities including mixing chemicals at the mixing hopper, cleaning out mud pits, etc. Assist in completing the cleaning, preparation and handling of tubulars and drilling tools. Supply the drill floor with tubulars, drilling tools and equipment as required. Liaise and co-operate with the Driller and Assistant Driller to ensure the safe and smooth running of operations.</p><p><strong>Materials &amp; Equipment:</strong> Ensures that lifting material and equipment are properly maintained, stored, inspected, and returned to its proper storage location in a condition where its ready to be used as per directed. Ensure thread protectors are properly installed on drill pipes, drill collars &amp; crossovers that are being hoisted or stored.</p><p><strong>Housekeeping:</strong> Ensures that the work area is clean and organized, free of hazards prior to &amp; upon completing the work tasks, or repairs. Ensure that housekeeping standards in all areas are in accordance with Company requirements. Disposes of debris as per the company hazardous material segregations policy/waste management policy taking into consideration the environmental &amp; safety aspects. Prepare surfaces for painting and apply paint as directed. Secure the current work area or operation before evacuating during emergency situations or drill.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Education &amp; Experience:</strong> High School or Technical Degree Preferably 1 year of working experience preferably in similar Oil and Gas industries. Minimum age 20 years up to 27 years old.</p><p><strong>Skills/Competencies Required:</strong> Elementary level of English language. Basic Mathematical skills adding, subtracting, dividing, multiplying . Situation Awareness / self-motivation, Teamwork, Time management / Managing work.</p><p><strong>Physical Requirements:</strong> Frequent climbing (stairs, ladders). Frequent lifting, pulling &amp; pushing as per Company procedure. Ability to work under different extreme weather conditions such as: Heat, Noise, Humidity &amp; Cold. Ability to work in day/night shifts.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p>

<p>A <strong>Chemical Plant In-Charge </strong>(often referred to as a Plant Manager or Production Manager) is responsible for overseeing the daily operations of a chemical manufacturing plant. Their role involves ensuring the plant runs efficiently, safely, and in compliance with all regulations while meeting production targets. </p><br><p><strong>Job Title:</strong> Chemical Plant In-Charge</p><br><p><strong>Key Responsibilities:</strong></p><br><p><strong>Operational Management:</strong></p><ul><li><p>Supervise and manage the day-to-day operations of the chemical plant, ensuring smooth production processes.</p></li><li><p>Monitor production activities to ensure compliance with safety, environmental, and quality standards.</p></li><li><p>Optimize production efficiency and minimize downtime through effective scheduling and resource management.</p><br></li></ul><p><strong>Staff Supervision:</strong></p><ul><li><p>Lead, manage, and train plant personnel, including operators, technicians, and engineers.</p></li><li><p>Assign tasks and responsibilities to staff and monitor their performance.</p></li><li><p>Conduct regular performance reviews and support the development of team skills and capabilities.</p><br></li></ul><p><strong>Safety and Compliance:</strong></p><ul><li><p>Ensure the plant adheres to all safety protocols, environmental regulations, and industry standards.</p></li><li><p>Implement and enforce safety programs, conduct risk assessments, and address any unsafe practices.</p></li><li><p>Stay updated with local, national, and international regulatory changes and ensure plant operations comply with these laws.</p></li></ul><br><p><strong>Maintenance and Equipment Management:</strong></p><p>Oversee the maintenance, repair, and calibration of plant machinery and equipment.</p><p>Coordinate with the maintenance team to ensure timely and efficient upkeep of plant infrastructure to prevent breakdowns.</p><br><p><strong>Quality Control:</strong></p><p>Ensure that all products meet the required quality standards and specifications.</p><p>Implement quality control checks throughout the production process and work with the Quality Assurance team to resolve any quality issues.</p><br><p><strong>Inventory and Supply Chain Management:</strong></p><ul><li><p>Monitor the inventory of raw materials, chemicals, and finished products to ensure smooth operations.</p></li><li><p>Coordinate with suppliers and vendors to ensure timely delivery of materials and supplies.</p><br></li></ul><p><strong>Budgeting and Cost Control:</strong></p><ul><li><p>Manage the plant’s budget, ensuring that operations stay within financial targets.</p></li><li><p>Identify areas for cost reduction and implement strategies to improve operational cost efficiency.</p></li></ul><br><p><strong>Reporting and Documentation:</strong></p><ul><li><p>Maintain detailed reports of production schedules, inventory levels, and maintenance activities.</p></li><li><p>Prepare regular reports for upper management on plant performance, safety audits, production statistics, and other key metrics.</p></li></ul><br><p><strong>Continuous Improvement:</strong></p><ul><li><p>Identify and implement process improvements to increase plant efficiency and reduce costs.</p></li></ul><p>Evaluate plant performance and implement best practices for enhanced productivity.</p><br><p><strong>Emergency Response:</strong></p><ul><li><p>Manage emergency situations (e.g., chemical spills, accidents) and coordinate the emergency response team.</p></li><li><p>Ensure that plant staff are properly trained in emergency protocols.</p><br></li></ul><p><strong>Required Qualifications:</strong></p><ul><li><p>Education: Bachelor's or Master's degree in Chemical Engineering, Mechanical Engineering, or a related field.</p></li><li><p>Experience: Several years of experience in a chemical plant or manufacturing environment, with proven experience in plant management or supervision.</p></li></ul><br><p><strong>Skills:</strong></p><ul><li><p>Strong leadership, organizational, and problem-solving skills.</p></li><li><p>Proficient in plant operations, safety regulations, and quality control processes.</p></li><li><p>Ability to work under pressure and manage multiple tasks.</p></li><li><p>Good communication skills, both verbal and written.</p></li><li><p>Knowledge of Lean manufacturing principles and continuous improvement practices.</p><br></li></ul><p><strong>Preferred Qualifications:</strong></p><ul><li><p>Advanced certifications in Safety Management or Process Optimization.</p></li><li><p>Familiarity with process automation and control systems.</p></li></ul><br><p><strong>Work Environment:</strong></p><ul><li><p>The position is typically based on-site at the plant.</p></li><li><p>May require irregular hours or on-call availability in case of emergencies or plant shutdowns.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are looking for a skilled CNC machine operator to join our outstanding team in Kuwait. The ideal candidate will be proficient in using Articam software. This role is essential to ensuring the accuracy of our manufacturing processes, which is critical to delivering high-quality products to our customers. As a CNC machine operator, you will work with state-of-the-art machinery and technology, making this a fantastic opportunity for individuals passionate about engineering and manufacturing. Our company values ​​innovation and efficiency, and we are committed to fostering a culture of continuous improvement and professional development.</p><p><br></p><p>In this role, you will have the opportunity to develop your skills and advance your career within our organization. We believe in investing in our employees through training programs and practical experience, ensuring you stay at the forefront of industry advancements. Our collaborative work environment encourages knowledge sharing and mentorship, allowing you to learn from experienced experts and contribute your unique perspective. As you gain experience, you will find numerous career development opportunities, from leadership positions to specialized technical roles.</p><p><br></p><p>Joining our team means being part of a company that prioritizes your growth and success. We are committed to providing a supportive work environment where every member of our team feels valued and empowered. As a CNC Machine Operator, you will play a pivotal role in our operations, and your contributions will directly impact our ability to meet customer demands and maintain our outstanding reputation. If you are ready to advance your career and make a real difference, we encourage you to apply and join our innovative team.</p><p><br></p><p>Responsibilities:</p><p><br></p><p>Set up and operate CNC machines, including lathes and milling machines, ensuring they are calibrated and ready for production, thus improving efficiency and minimizing downtime.</p><p><br></p><p>Interpret drawings and technical specifications to produce parts that meet quality standards, using precise measuring instruments to verify dimensions and tolerances.</p><p><br></p><p>Monitor machine operations during production cycles and make necessary adjustments to maintain optimal performance and product quality.</p><p><br></p><p>Perform routine maintenance on CNC equipment to prevent breakdowns and ensure a safe working environment, minimizing process disruptions.</p><p><br></p><p>Collaborate with engineers and production supervisors to improve manufacturing processes and implement best practices, contributing to overall operational excellence.</p><p><br></p><p>Document production data and maintain accurate records of machine performance and output, contributing to performance analysis and continuous improvement initiatives. Train and mentor junior operators in CNC machine operation and safety protocols, fostering a culture of knowledge sharing and skills development within the team.</p><p><br></p><p>Adhere to safety guidelines and protocols during machine operation, ensuring compliance with industry regulations to maintain a safe working environment.</p><p><br></p><ol><li>Participate in team meetings, contribute to problem-solving discussions, and assist in identifying and effectively resolving production challenges.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>PrProficient in operating CNC machines and accurately reading technical drawings.</p><p><br></p><p>Also proficient in using ArtCAM software.</p><p><br></p><p>Deep understanding of machining processes and selecting appropriate tools for various materials.</p><p><br></p><p>Ability to efficiently diagnose and resolve mechanical problems in CNC equipment.</p><p><br></p><p>Experience in quality control procedures and the use of precision measuring instruments.</p><p><br></p><p>Knowledge of safety regulations and best practices in the manufacturing environment.</p><p><br></p><p>Excellent communication skills for effective collaboration with team members and supervisors.</p><p><br></p><ul><li>Willingness to learn and adapt to new technologies and manufacturing methods.</li></ul></div>

<p>We are looking for a Systems Engineer to work closely with a sales representative in a defined territory. The Systems Engineer's main mission will be to support the sales organization in all technical matters regarding OT/Cyber Security, pre-sales, sales calls, and post-sales. This exciting role will require an OT/Cyber Security technical expert, who will have a focused messaging, proactively approach customer OT buying centres, create positive awareness around Fortinet OT proposition. You will support your Sales colleagues to develop and close OT opportunities.</p><p>With us you will Lead all technical aspects of a sales cycle with the Enterprise customers, from the initial RFIs, through to RFPs &amp; RFQs when required. This includes the project management and active participation in POCs in partnership with the relevant teams both internally and within the customer and/or commercial partner. Have the ability to listen and to understand the technical requirements of the customer, reading between the lines to build a solution which outperforms the competitor offering. Be the primary technical point of contact for the customer(s) and partners in close collaboration with your sales partner. Continuously strive to improve knowledge around the Fortinet products and solutions, along with maintaining a deep understanding of the competitive landscape and Fortinet s ability to provide long lasting protection against the ever-evolving threats. Have a strong ability to position Fortinet solutions to the customer, whether this be remotely or in person. This requires strong communication skills and the ability to confidently present through whiteboarding, technical white papers, technical plans or customer discussions. Manage your time effectively when working on multiple deals simultaneously, ensuring a positive customer experience is maintained. Maintain accurate activity, contact, and account technical information of all customers and prospects in our CRM (Salesforce).</p><p>What you can expect from us Excellent training and development opportunities, providing you with all the tools you need to be successful. An open working environment, sharing knowledge and information collaboratively and transparently, with respect to everyone s thoughts and opinions. The opportunity to be part of an innovative, collaborative and winning team. A competitive salary and incentive compensation package, including stock awards, health and welfare benefits.</p><p>From the start, the Fortinet vision has been to deliver broad, truly integrated, high-performance security across the IT infrastructure. Today, we secure the largest enterprises, service providers and government organizations around the world. Fortinet empowers its customers with intelligent, seamless protection across the expanding attack surface and the power to take on ever-increasing performance requirements of the borderless network today and into the future. We have proven to be a truly innovative technology driven network security company with over 619 registered Global Patents. This is over 3 times more than our closest most innovative competitor!</p><p>Why Join Us: At Fortinet, we embrace diversity and inclusivity. We encourage applications from diverse backgrounds and identities. Explore our welcoming work environment designed for a rewarding career journey with an attractive Total Rewards package to support you with your overall health and financial well-being. Join us in bringing solutions that make a meaningful and lasting impact to our 660,000+ customers around the globe.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Have a high aptitude for security technology, specifically encryption, authentication, with further knowledge of network security, intrusion detection, anti-virus, routing, switching, LAN and WAN being desirable. The CISSP accreditation would also be beneficial.</li><li>Are currently or have previously worked in a pre-sales engineer role, managing end to end technical aspects of deals, through to technical closure.</li><li>Can demonstrate your problem solving skills and how this has impacted key wins within your current organisation.</li><li>Understand and can demonstrate your ability to build and maintain customer relationships, including your ability to effectively communicate technically to a range of both external and internal stakeholders.</li><li>Have a strong understanding of RADIUS, PKI, IKE, Certificates, L2TP, IPSEC, FIREWALL, 802.1Q, MD5, SSH, SSL, SHA1, DES, 3DES</li></ul>

<p><h4>Job description</h4> <p>The aircraft mechanic II - powerplant/engine – back shop mechanic (T700/701C/D, T55-714) with experience in all three MDS UH60, CH47 & AH64 performs and inspects aviation unit (AVUM), intermediate (AVIM) and depot maintenance on assigned aircraft systems.</p> <p>Perform maintenance and repair of major assemblies and subassemblies of the T700/701C/D, T55-714 and auxiliary power units.</p> <p>Inspect engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks.</p> <p>Perform blade blending and blade replacement in cold section of powerplants.</p> <p>Replace or repair worn or damaged components, such as generators, alternators, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves.</p> <p>Ability to perform hot section inspections and determine replacement of hot section components (GG rotors, stators, fuel injectors, igniters, power turbine).</p> <p>Disassemble and inspect parts for wear, cracks, security, or other defects.</p> <p>Perform engine removal, replacement, reinstallation, and quick-change assembly (QCA) maintenance tasks.</p> <h4>Minimum requirements</h4> <ul> <li>High school graduate or equivalent is required.</li> <li>Five (5) years of recent applicable aircraft maintenance experience is required.</li> <li>With A&P: two (2) years aviation maintenance experience, and two (2) years' experience on MDS UH60, CH47, & AH64 is required.</li> <li>Without A&P: must have three (3) years aviation maintenance experience, three (3) years rotary wing aircraft experience and two (2) years on the assigned mission design series UH-60, AH-64, CH-47 (MDS) to qualify.</li> <li>All experience must be within the five (5) most recent years.</li> <li>Must be in possession of a valid U.S. passport for travel internationally. Passport must contain a minimum of 6 blank pages and 2 years remaining before expiration date.</li> <li>Ability to obtain/maintain a US government security clearance (NAC-I T1) public trust. US citizenship is required to obtain a security clearance, and for facility access to this site.</li> <li>Able to clear CENTCOM MOD physicals requirement for deployment (attend CRC).</li> <li>Must be able to obtain Kuwait visa.</li> </ul> <h4>Knowledge & skills</h4> <ul> <li>General knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</li> <li>Thorough knowledge of aircraft electrical and avionics component and system troubleshooting, repair procedures and replacement of parts.</li> <li>Thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers.</li> <li>Working knowledge of technical publications and logistics information systems.</li> <li>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</li> <li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>May work in aircraft maintenance hangar or outside.</li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> <li>May be exposed to extreme noise from turbine and jet engine aircraft.</li> <li>May be exposed to fumes or airborne particles; may be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft.</li> <li>Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift up to 50 pounds.</li> <li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li> <li>Must be able to see imperfections, micrometer readings and other small scales.</li> <li>Must be able to communicate by voice and detect sound by ear.</li> <li>Must be able to distinguish color and judge three-dimensional depth.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li> </ul> <h4>Compensation details</h4> <p>Not applicable</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Original posting</h4> <p>The company anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>The company is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p><h4>Position summary</h4> <p>Ensure staff is working together as a team. Inspect grooming and attire of staff and rectify any deficiencies. Communicate with guests, other employees, or departments to ensure guest needs are met. Respond to and try to fulfill any special banquet event arrangements. Set up banquet area/room, ensuring cleanliness and proper set up of furniture/equipment. Inspect and maintain table set-ups for cleanliness, neatness and agreement with group requirements and company standards, and resolve any problems. Document pertinent information in appropriate department logbook.</p> <p>Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees. Develop and maintain positive working relationships with others, and support team to reach common goals. Follow all company and safety and security policies and procedures; report accidents, injuries, and unsafe work conditions to manager; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs,</p><p></p>

Company Description Ahmaedzai is a transportation-focused company that provides reliable trucking and delivery services to a range of clients. The organization values safety, punctuality, and professional conduct on every route. Ahmaedzai aims to build long-term relationships through consistent service quality and clear communication. Team members are supported with structured processes and expectations to help them perform at a high standard. The company is committed to fair, inclusive employment practices and a respectful working environment.<br>Role Description This is a full-time remote Driver role, with driving assignments starting from various locations depending on route and load requirements. The Driver will operate company trucks safely and efficiently, following all traffic laws and industry regulations. Daily tasks include inspecting the truck before and after trips, completing required logs and documentation, and coordinating with dispatch for schedules and route updates. The Driver will load and unload cargo as needed, secure freight properly, and ensure timely delivery to customers or partner facilities. The role also involves communicating professionally with customers and team members, reporting any incidents or vehicle issues, and adhering to company safety and maintenance standards.<br>Qualifications<br> <br>Strong truck operation skills, including Truck Driving and safe handling of commercial Truck equipment. Valid CDL Class A license and a clean driving record, with knowledge of relevant transportation regulations. Effective Communication abilities to coordinate with dispatch, report issues, and follow route instructions. Customer Service skills to interact respectfully with clients, manage delivery expectations, and represent the company professionally. Ability to work full time in a remote-driving capacity, manage time independently, and adapt to changing routes and schedules. Commitment to safety, including adherence to company policies, pre-trip and post-trip inspections, and basic vehicle care. Physical ability to sit for extended periods, handle loading or unloading tasks as required, and work in varying weather conditions. High school diploma or equivalent; prior experience as a commercial driver is preferred.

<p>Job Summary We are looking for an experienced Low Voltage Engineer to supervise and manage low-voltage electrical and ELV systems. The candidate should have good technical knowledge, project coordination skills, and experience in installation, testing, and maintenance.</p><p>Key Responsibilities:</p><ul><li>Supervise and coordinate LV/ELV installation and maintenance works.</li><li>Review electrical drawings, layouts, and project specifications.</li><li>Coordinate with technicians, contractors, and other engineering teams.</li><li>Monitor installation, testing, and commissioning activities.</li><li>Inspect completed works and ensure quality and safety standards.</li><li>Troubleshoot technical issues and provide suitable solutions.</li><li>Prepare work progress reports and material requirements.</li><li>Ensure compliance with project specifications and safety procedures.</li></ul><p>Technical Skills:</p><ul><li>Good knowledge of Low Voltage (LV) and ELV systems.</li><li>Experience with distribution boards, cables, circuit breakers, and control panels.</li><li>Knowledge of systems such as CCTV, access control, fire alarm, structured cabling, and intercom.</li><li>Ability to read and understand electrical and ELV drawings.</li><li>Basic knowledge of testing and commissioning.</li><li>Knowledge of AutoCAD is an advantage.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Candidate Requirements :</p><ul><li>Degree/Diploma in Electrical Engineering, Electronics, or related field.</li><li>Minimum 3+ years of relevant experience.</li><li>Strong technical and problem-solving skills.</li><li>Good communication and coordination abilities.</li><li>Ability to supervise site activities and manage deadlines.</li></ul>