Heavy equipment mechanical engineer Jobs

<p><h4>Position summary</h4> <p>Ensure staff is working together as a team. Inspect grooming and attire of staff and rectify any deficiencies. Communicate with guests, other employees, or departments to ensure guest needs are met. Respond to and try to fulfill any special banquet event arrangements. Set up banquet area/room, ensuring cleanliness and proper set up of furniture/equipment. Inspect and maintain table set-ups for cleanliness, neatness and agreement with group requirements and company standards, and resolve any problems. Document pertinent information in appropriate department logbook.</p> <p>Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees. Develop and maintain positive working relationships with others, and support team to reach common goals. Follow all company and safety and security policies and procedures; report accidents, injuries, and unsafe work conditions to manager; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs,</p><p></p>

Company Description Ahmaedzai is a transportation-focused company that provides reliable trucking and delivery services to a range of clients. The organization values safety, punctuality, and professional conduct on every route. Ahmaedzai aims to build long-term relationships through consistent service quality and clear communication. Team members are supported with structured processes and expectations to help them perform at a high standard. The company is committed to fair, inclusive employment practices and a respectful working environment.<br>Role Description This is a full-time remote Driver role, with driving assignments starting from various locations depending on route and load requirements. The Driver will operate company trucks safely and efficiently, following all traffic laws and industry regulations. Daily tasks include inspecting the truck before and after trips, completing required logs and documentation, and coordinating with dispatch for schedules and route updates. The Driver will load and unload cargo as needed, secure freight properly, and ensure timely delivery to customers or partner facilities. The role also involves communicating professionally with customers and team members, reporting any incidents or vehicle issues, and adhering to company safety and maintenance standards.<br>Qualifications<br> <br>Strong truck operation skills, including Truck Driving and safe handling of commercial Truck equipment. Valid CDL Class A license and a clean driving record, with knowledge of relevant transportation regulations. Effective Communication abilities to coordinate with dispatch, report issues, and follow route instructions. Customer Service skills to interact respectfully with clients, manage delivery expectations, and represent the company professionally. Ability to work full time in a remote-driving capacity, manage time independently, and adapt to changing routes and schedules. Commitment to safety, including adherence to company policies, pre-trip and post-trip inspections, and basic vehicle care. Physical ability to sit for extended periods, handle loading or unloading tasks as required, and work in varying weather conditions. High school diploma or equivalent; prior experience as a commercial driver is preferred.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The Programmer/Analyst II is responsible for deploying and supporting custom built and out of the box solutions with SharePoint 2010. Also, the position supports and develops software applications using ASP.NET for internal customers. The role ensures programs are integrated with the services needed on the project and helps to automate functions wherever applicable. The Programmer/Analyst reports to the Operations Manager but takes direction from the Programmer Analyst III. Program: OMDAC-SWACA. This position offers company-paid housing and transportation, a completion bonus, and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver’s license in order to be qualified for this position. Responsibilities + Work with Technical Leads to gather user requirements and interpret into design specifications. + Design and develop reports, with input from the technical staff and user groups. + Conduct performance tuning of reports. + Design, implement, and maintain code needed for data extraction, transformation and loading. + Test enhancement and development programs and MS SQL code. + Participate in structured code reviews/walkthroughs. + Make sound recommendations on functional and technical improvements to the assigned system components and applications. + Provide strong SQL coding experience with high level knowledge of MS SQL database structure, stored procedures, etl, problem resolution, and routine maintenance. + Detailed functional and process knowledge. + Utilize deep modeling, design and coding skills. + The working environment will be 80% office and 20% on the road. + Performs other duties and assignments as required. Qualifications + Qualifications + Security Clearance: + Requires an active Secret Clearance. + Education/Certifications: One-year related experience may be substituted for one year of education if a degree is required. + Bachelor’s degree preferred, Master’s degree a plus. + This position requires candidates to adhere to DoD 8570.01M. All candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. Baseline Environment (BE) certifications cannot also be used as a Computing Environment (CE). + The authorized certifications for this job title are listed as follows: + BASELINE: + Cisco: CCNP: Certified Network Professional - Security + CompTIA: CASP+ ce: Advanced Security Practitioner + CompTIA: Security+ ce + GIAC: GCIH: Certified Incident Handler + GIAC: GSEC: Security Essentials + ISACA: CISA: Certified Information Systems Auditor + ISC2: CISSP (or Associate): Certified Information Systems Security Professional + ISC2: SSCP: Systems Security Certified Practitioner + COMPUTING ENVIRONMENT (CE): + Microsoft: Certified: Azure Database Administrator Associate + Microsoft: 365 Certified: Enterprise Administrator Expert + Microsoft: Certified: Azure Security Engineer Associate + Microsoft: Certified: Azure Solutions Architect Expert + Microsoft: MCPD: SharePoint Developer 2010 + Microsoft: MCSD: Certified Solutions Developer (Any) + Microsoft: MCSE: Core Infrastructure + Microsoft: MCSE: Database Management and Analytics + Microsoft: MCSE: Productivity Solutions Expert + Experience: + Two to three years of experience in developing custom UI solutions in SharePoint 2010/2013. + Migrating knowledge from SharePoint 2010 to 2013 big plus. Knowledge of installing and configuring SharePoint 2010. + Knowledge of integrating SharePoint with other web applications. + Experience with PowerShell scripting in SharePoint environment. + 5+ years of coding in .Net and Object-Oriented development. + Experience with ASP.NET and MVC framework. + Proficiency in using Visual Studio 2012, TFS, SQL Server Management Studio and SQL Server Profiler. + Solid experience in developing custom responsive UI solutions using CSS, jQuery, JS and HTML5. Advanced knowledge of using MS SQL (stored procedure, Views, Functions). + Working knowledge of the following languages is a must (C#, VB.net, MS SQL, PowerShell, JavaScript, HTML5 and CSS3). + Familiarity using one of the following libraries or similar other libraries (Bootstrap, jQuery, Underscore.js, Handlebars.js or mustache.js). + Knowledge of network infrastructure and Windows operating systems preferred. + Strong troubleshooting skills. + Experience with a customer service-oriented company. Working Environment + The work environment will be 95% indoors and 5% outdoors. + The outdoor work environment may exceed temperatures 100 degrees F. Candidate must be able to physically withstand extreme heat. Physical Requirements + Must be capable of lifting, pushing, and pulling items weighing up to 50 lbs. + Must be capable of wearing Personal Protective Equipment (helmet and plated vest) which can weigh 25 to 40lbs, for extended periods of time. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients. #LI-YG1 #clearance</p> </div>

<p>Boeing Operations International Incorporated Kuwait The Boeing Company is currently seeking a C-17 Product Repair/Mod Technician to support Boeing Global Services in Al Mubarak Air Base Kuwait . This position is part of the on-site C-17 Globemaster III Integrated Sustainment Program maintenance team supporting the Kuwait Air Force (KAF) C-17 aircraft based at Al Mubarak Air Base Kuwait. Applicants will participate in organizational level maintenance activities (e.g. flight line tasks including aircraft servicing, inspections, fault diagnosis and component replacement) associated with day-to-day operations of C-17 Globemaster III aircraft to meet KAF mission requirements. Additionally, participation in Intermediate level maintenance activities (e.g. back-shop tasks including component repair, test set operation, battery charging, and scheduled periodic inspections) will be required. This position is required to work one of two shifts Sunday through Thursday, weekends and holidays as required to support the flight line maintenance requirements. Position Responsibilities: English is the primary language of the KAF community on the airbase in Kuwait. All technical data to perform the tasks and training are in English. Competency in reading, comprehension and speaking the English language is necessary. Leads the assembly, disassembly and/or modification of systems by the change, removal, replacement or upgrade of aerospace vehicle components to correct failures or implement changes. Oversee assembly, disassembly or overhaul. Configure aerospace vehicles and bench test equipment. Directs troubleshooting of complex pneumatic, hydraulic, electrical and avionics systems to isolate mechanical or electrical faults and repair faulty components. Oversees validation/verification testing of systems and components. Document procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspects components and verifies repairs for flight worthiness requirements. Leads and supervises others to perform tasks associated with the safe handling of an aerospace vehicle (e.g. jacking, towing, system operations). Provides training and mentors others. Works under minimal direction.</p><p><strong>Desired Candidate Profile</strong></p><p>Basic Qualifications (Required Skills/Experience):<br>5+ years of C17 maintenance experience Candidate must be able to meet the cultural requirements of the country as applicable. This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship. An interim and/or final U.S. secret clearance Post Start is required.</p>

<p>Job Summary We are looking for an experienced Low Voltage Engineer to supervise and manage low-voltage electrical and ELV systems. The candidate should have good technical knowledge, project coordination skills, and experience in installation, testing, and maintenance.</p><p>Key Responsibilities:</p><ul><li>Supervise and coordinate LV/ELV installation and maintenance works.</li><li>Review electrical drawings, layouts, and project specifications.</li><li>Coordinate with technicians, contractors, and other engineering teams.</li><li>Monitor installation, testing, and commissioning activities.</li><li>Inspect completed works and ensure quality and safety standards.</li><li>Troubleshoot technical issues and provide suitable solutions.</li><li>Prepare work progress reports and material requirements.</li><li>Ensure compliance with project specifications and safety procedures.</li></ul><p>Technical Skills:</p><ul><li>Good knowledge of Low Voltage (LV) and ELV systems.</li><li>Experience with distribution boards, cables, circuit breakers, and control panels.</li><li>Knowledge of systems such as CCTV, access control, fire alarm, structured cabling, and intercom.</li><li>Ability to read and understand electrical and ELV drawings.</li><li>Basic knowledge of testing and commissioning.</li><li>Knowledge of AutoCAD is an advantage.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Candidate Requirements :</p><ul><li>Degree/Diploma in Electrical Engineering, Electronics, or related field.</li><li>Minimum 3+ years of relevant experience.</li><li>Strong technical and problem-solving skills.</li><li>Good communication and coordination abilities.</li><li>Ability to supervise site activities and manage deadlines.</li></ul>

<p>e-Portal is actively recruiting for the role of SI Senior Computing Engineer . In this role, you will be responsible designing, implementing, and supporting computing infrastructures across multiple customer environments. This includes servers, storage, hypervisors, operating systems, cloud platforms, backup solutions, and hyper converged infrastructure (HCI) and ensures SLA compliance through preventive maintenance, proactive monitoring, and advanced L3 troubleshooting by collaborating with clients, vendors, and cross functional teams, they deliver seamless integration and reliable performance.</p><p>Roles and Responsibilities:</p><p>Your responsibilities will include, but not be limited to, the following:</p><ul><li>Design, implement, and support IT infrastructure including servers, storage, cloud platforms, HCI, and backup solutions.</li><li>Ensure system reliability through monitoring, preventive maintenance, and advanced (L3) troubleshooting while meeting SLA requirements.</li><li>Collaborate with clients, vendors, and internal teams to deliver integrated and successful solutions.</li><li>Track progress, manage tickets, monitor KPIs, and prevent SLA breaches through effective workload management.</li><li>Mentor junior engineers, maintain documentation, and contribute to technology planning aligned with business needs.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>To qualify for this role, you must meet the below minimum requirements:</p><ul><li>Bachelor's degree in computer science, Information Security, or a related field.</li><li>Minimum of 5-7 years of experience.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview **This position will be physically located in Kuwait** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Performs complex administrative tasks in receiving, storing, inventorying, and issuing Government Material/Property and compiles automated stock records in Maximo, IFS, and GCSS-A systems. Submits acquisitions, tracks orders, and perform receipt transactions in GCSS-A system. Processes customers’ materiel/equipment orders and validates contractual requirement to acquire IAW the Program’s PWS. Perform 3-way match, receive, segregate and issue materiel/equipment to customers. “CAC” – should have the ability to obtain one. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Screens and validates acquisitions throughout the entire LCV KU TO. + Validates acquisitions’ financial and contractual compliance. + Submits customer acquisitions and tracks orders in Maximo, IFS, and GCSS-A system. + Coordinates, reconciles, and expedites materiel/equipment acquisitions. + Accesses DLA Logistics systems to track incoming shipments. + Performs receipt transactions in Maximo, IFS, and GCSS-A system. + Validates and processes suppliers’ invoices for approval and payments. + Maintains files used and prepared in accordance with governing rules, regulations, and policies, to include archiving records using GCSS-Army system. + Runs daily reports in MAXIMO, IFS, and GCSS-A systems. + Runs the warehouses Re-order analysis report and analyzes the stockage levels. + Submits replenishment orders in Maximo and GCSS-A systems. + Prepare, read, and analyze records and reports necessary to execute actions accordingly. + Perform other duties as required. Qualifications + Education/Experience Requirements + Minimum Qualifications: Education/Certifications: One-year related experience may be substituted for one year of education, if degree is required. + High School Diploma or equivalent. + GCSS-A Certification desired. If no certification, must successfully complete web based or in-person training courses within 90 days of assuming the position. + Must be CAC eligible and/or able to obtain a Common Access Card (CAC) + Must be a U.S. Citizen + Skills + Experience in military or commercial supply management system. GCSS-Army and DLA Program experience is preferred. + Strong- knowledge level of automated financial and accounting systems. + IFS experience is desired. + Maximo system experience is desired. + Ability to develop training materials using the latest electronic tools and deliver training to a multinational work force with varying language skills. + Microsoft Office, with intermediate to advanced Excel skills + Strong analytical skills + Customer Service training + Physical Requirements + Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. + Visual Acuity + The worker is required to have visual acuity to determine the accuracy, neatness, and thoroughness of the work assigned (i.e., custodial, food services, general laborer, etc.) or to make general observations of facilities or structures (i.e., security guard, inspection, etc.). + Working Conditions + The worker is subject to extreme cold. Temperatures typically below 32 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity. + The worker is subject to extreme heat. Temperatures above 100 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity. + The worker is subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Red Switch Technician II will supervisor Red Switch Technician I personnel and operate and maintain (O&amp;M) the Defense Red Switch Network (DRSN) facility in accordance with Defense Information Systems Agency (DISA) regulations and guidelines. Responsible for organizing and implementing system and facility upgrades with Raytheon, DISA, and local agencies. Prepare and maintain DRSN facility in accordance with various agency checklist requirements such as Quality Control (QC), DRSN Security, DISA Performance Evaluation (PE), Communications Security (COMSEC), etc. Train DRSN technicians and military deployment teams on operation, maintenance, and troubleshooting of equipment. Brief various levels of management within the civilian and military sector on DRSN operations and requirements. Responsible for ensuring subscribers are trained on the features and capabilities of their phone instruments and are operating their DRSN phones within the prescribed security requirements. Responsible for providing DRSN Operations and Maintenance (O&amp;M) support. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver’s license in order to be qualified for this position. Responsibilities + O&amp;M of the Digital Small Switch (DSS-2A). Monitor trunk and circuit outages as well as the administrative terminal and Enhanced Command Console (ECC). + Perform direct trunk dialing checks on trunk channels associated with the switch to ensure satisfactory operation of voice circuits (at least once each shift and following any trunk failure). + Perform Preventive Maintenance Inspections (PMIs) on the switch and peripheral equipment. + Create and update databases in the administrative terminal using information received from users, Raytheon, and DISA. + Perform database backups to CD-R discs. + Perform database downloads to update switch configurations. + Update and print out telephone console information and line strips for users. + Fabricate custom interface cables using hand tools and wiring diagrams. + Escort individuals requiring access to the Red Switch in the performance of their duties. + Ensure that all outages are reported in a timely manner to the DISA GNOSC, NOC-K, TCF, V2X management for tracking in Army Enterprise Service Management Platform (AESMP) ticketing system. + Provide hourly status updates to designated agencies in regard to outages, etc. + Annotate all activities in the Master Station Log (MSL) database. + Prepare call detail history reports for DISA and military personnel as directed. + Contribute to weekly reports with regard to your additional duties and other assigned tasks. + Complete individual timesheets on a daily basis. + Check the Regional Cyber Center (RCC) website for accuracy with regard to authorized service interruptions (ASIs) and outages. + Initiate Quality Control checklists as they pertain to your additional duties. + Update training records as needed. + Update memorandums and technical drawings (including block diagrams and schematics) as directed. Inventory Communications Security (COMSEC) equipment and document DA Form 2653-R (each shift). + Work with military technical monitor(s), Special Security Office (SSO) and other Department of Defense contractors and civilians including local hires in support of the DRSN mission. + Interface with technicians from Outside Plant, DPW, etc. regarding installations in support of the DRSN mission. + Coordinate with the Raytheon Help Desk for troubleshooting problems that cannot be resolved locally. + Contact the Return Merchandise Authorization (RMA) Help Desk in order to obtain a RMA for processing depot equipment repairs. + Performs other duties and assignments as required. Qualifications + Qualifications: + Security Clearance: + Active Top Secret SSBI within the past two years. + Individual must be eligible for Sensitive Compartmentalized Information (SCI) Access. + Education / Certifications: One year of related experience may be substituted for one year of education, if a degree is required. + High School Diploma required. + Bachelor’s Degree in IT or related field preferred. + Cardiopulmonary Resuscitation (CPR) (Training provided by contract) + This position requires candidates to adhere to DISA requirement. All candidates are required to maintain at least one (1) baseline certification. + The authorized certification for this job title are listed as follows: + Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience. + Seven years’ experience in Communications-Electronics Maintenance functions: + installation, troubleshooting and repair of electronic communications equipment. + Use of phone + Digital sender, and desktop computer in a fast-paced office environment is desirable. + A working knowledge of Microsoft Office software is required. Must be able to work rotating shift schedules which provide 24-hour day/7-day week coverage. + Military or civilian technical training course of six (6) months or more is required. + This should be followed by a minimum of 24 months of on-the-job training (OJT). + A certificate of completion will suffice until verification of the training on your DD-214 can be completed. + Experience with a customer service-oriented company. + SUPERVISORY / BUDGETARY RESPONSIBILITIES + At least two years of supervisory or lead experience is preferred. + Update proprietary applications regarding: + Update section employee daily status, leave, sick, on site, etc. + Verify and track accomplishment of section monthly or quarterly safety and compliance training + Purge section employee expired certifications + Verify section employee compliance training in Virtual Training Record + Verify section vehicle logs are being kept accurately and uploaded + Ensure section personnel are maintaining their 8570 / 8140 certifications + Review weekly training compliance reports for accomplishment prior to suspense. + Review and approve leave forms ensuring before approval all compliance training is current. + Coordinate transportation and integration of new and returning employees. + Document and promptly counsel poor performance and policy violations. + Enforce all V2X, GO 1, and dress code policies. + Provide annual employee appraisal feedback in a professional and constructive manner. + Demonstrate V2X values Integrity, Respect, Responsibility, and Professionalism. + Ensure the safety of personnel and monthly safety inspections are properly conducted. + Communicate effectively up and down the chain of command. + Manage work schedules. + Conduct proper new and returning employee orientation and ensure employee thorough understanding and can accomplish all tasks in the Employee Job Certification (EJC) + Work with employees and HR when emergencies or abnormal circumstances occur. + To the best of your ability render all decisions based upon our company values and principles of Integrity, Respect, Responsibility, and Professionalism. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Prepares weekly, monthly, quarterly, and annual utilization schedules for maintenance. Maintains proficiency in operations of the USAF Maintenance Information System including Core Automated Maintenance System (CAMS), Centralized Engine Management System (CEMS), and other maintenance management database library programs. Maintains equipment records in library files. Collects, reviews, and files documented information for planning and scheduling of various maintenance activities. Ensures accurate documentation is maintained for aircraft engines, munitions, missiles, AGE configurations, Time Compliance Technical Orders, time change items, and special inspections.</p> <p>USAF equivalent position is Aircraft Scheduling & Documentation Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Assist in the preparations of the weekly, monthly, quarterly, and annual utilization schedules for maintenance.</li> <li>Will oversee TCTO process for completion and proper documentation with IMDS and/or CEMS.</li> <li>Maintains assigned aircraft/equipment records in database library files within IMDS and/or CEMS.</li> <li>Assists in the collection, review, and filing of documented information for planning and scheduling of RPA maintenance activities.</li> <li>Ensure accurate documentation is maintained for aircraft engines, munitions, missiles, AGE configurations, Time Compliance Technical Orders, time change items, and special inspections.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one-year actual aircraft plans & scheduling experience required.</li> <li>Must possess basic planning and organizational skills.</li> <li>Must be able to work under deadlines with minimal supervision.</li> <li>Must be able to gain/maintain CEMS access for engine management purposes.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have a current/active U.S. driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Plans and scheduling experience within the last 10 years.</li> <li>RPA operations & deployment experience.</li> <li>Previous experience as engine manager with CEMS experience.</li> <li>Prior experience as a defense contractor.</li> <li>Previous MQ-9 plans and scheduling experience desired.</li> </ul></p><p></p>

<p>The Driller is responsible for ensuring that the work in and around the drill floor and BOP as well as the rig up and rig down procedures and the drilling operations occurs in a safe and effective manner thereby meeting and / or exceeding Nabors Drilling Company's and the contracting Company's goals and objective for safety, production and budget. The Driller works under the direction and supervision of the Rig Manager. By leveraging its core competencies, particularly in drilling, engineering, automation, data science and manufacturing, Nabors aims to innovate the future of energy and enable the transition to a lower carbon world. Ability to perform essential functions of this position with or without reasonable Accommodations. Minimum 3 years experience as Driller with 3000 HP Rig Strong knowledge of the Floorhand, Motorhand and Derrickhand positions. Ability to wear respiratory protective devices. Ability to communicate in English - read-write -speak fluently.</p><p>Preferred Qualifications:</p><ul><li>High school diploma, certificate or equivalent</li><li>AC and/or SCR Rig experience</li><li>Completion of Certified Driller Level - Well Control course that is unexpired</li><li>Experience using computer and multiple screens to monitor drilling activities</li></ul><p>Anticipate potential problems, pre plan and implement corrective action in a timely manner thereby helping to ensure outcomes reach company goals for the drilling operations</p><p>Work with the Rig Manager to assist with post analysis reviews of critical actions and implement ongoing best practice activities for future operations.</p><p>Ensuring the safety of the drill crew and all support personnel working in and about the drill floor. Oversee proper rig up and rig down, continual preventive maintenance and repair of the equipment used in the drilling operations along with ensuring continual cleaning and housekeeping in and about the drill floor. Ensure drilling operations follow established plan. Substitute for a Floorhand in the absence of a trained Floorhand</p><p>Together with the Rig manager, continually train and develop employees working on the drilling rig so as to meet the employee's career goals while at the same time meeting the needs of the company.</p><p>Responsible for monitoring the progress of the drilling operation, determine when bits need to be changed while operating pumps, rotary table, draw-works and drill pipe. Ability to operate rig utilizing rig controls while monitoring operation of various equipment (pump pressures, weight indicator, drill string weight, etc.) Knowledge of Drilling rig equipment capacity and functionality including but not limited to Canrig Top Drives, accumulator units, draw works. Adjust mud pumps to maintain the proper circulation rate. Ability to perform basic math functions.</p><p>Essential Functions:</p><ul><li>Attention span to stay alert and attentive for up to 12 hour tour.</li><li>Able to works 28 days on and 28 days off, including holidays, weekends and or days and nights.</li><li>Able to work well with others while working in a close environment for extended periods of time with minimal ability to leave the driller's cabin.</li><li>Make important judgment decisions that affect the safety of the crew.</li><li>Give verbal instructions clearly and concisely.</li><li>Advanced knowledge of the emergency shut-in procedures and be able to respond to any emergency efficiently and professionally</li><li>Able to stand or stand and walk throughout the tour while wearing steel toed boots.</li><li>Occasionally climb steep stairs and walking on steel decking as well as gravel, board roads and area that can be covered in drilling fluids, mud, snow and ice.</li><li>Must be able to repetitively climb stairs and ladders, work in an unprotected environment as well as be able to lift / carry and work with items weighing upwards of 35 lbs.</li><li>Assist the Rig Manager with trouble shooting and problem-solving duties and decisive manner.</li><li>Other duties as required by the Rig Manager.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Ability to perform essential functions of this position with or without reasonable Accommodations.</li><li>Minimum 3 years experience as Driller with 3000 HP Rig</li><li>Strong knowledge of the Floorhand, Motorhand and Derrickhand positions.</li><li>Ability to wear respiratory protective devices.</li><li>Ability to communicate in English - read-write -speak fluently.</li><li>High school diploma, certificate or equivalent</li><li>AC and/or SCR Rig experience</li><li>Completion of Certified Driller Level - Well Control course that is unexpired</li><li>Experience using computer and multiple screens to monitor drilling activities</li><li>Attention span to stay alert and attentive for up to 12 hour tour.</li><li>Able to works 28 days on and 28 days off, including holidays, weekends and or days and nights.</li><li>Able to work well with others while working in a close environment for extended periods of time with minimal ability to leave the driller's cabin.</li><li>Make important judgment decisions that affect the safety of the crew.</li><li>Give verbal instructions clearly and concisely.</li><li>Advanced knowledge of the emergency shut-in procedures and be able to respond to any emergency efficiently and professionally</li><li>Able to stand or stand and walk throughout the tour while wearing steel toed boots.</li><li>Occasionally climb steep stairs and walking on steel decking as well as gravel, board roads and area that can be covered in drilling fluids, mud, snow and ice.</li><li>Must be able to repetitively climb stairs and ladders, work in an unprotected environment as well as be able to lift / carry and work with items weighing upwards of 35 lbs.</li><li>Assist the Rig Manager with trouble shooting and problem-solving duties and decisive manner.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>RESPONSIBILTIES:-<span></span></b></p><p>&nbsp;</p><p>&nbsp;</p><ul><li>Responsible for successful initiation, planning, design, execution, monitoring, controlling and closure of a projects to a high standard, and ensure projects compliance with Projects Division/ company policies and legal requirements.</li><li>Responsible for the commercial performance of the project including the preparation and submission of payment applications, preparation and submission of variations, and agreement of the same.</li><li>Ensure the Project activities adhere to the requirements of the QHSE Management System.</li><li>Prepare periodic reports for management including status of budgets, variance/change claims, schedules, disputes, up-coming activities &amp; safety records.</li><li>Ensure project estimates are accurate and the project scope is executable within the budget.</li><li>Prepare project implementation schedules.</li><li>Manage the appropriate purchase and sub-contract orders as required on the projects.</li><li>Create project organization charts and contact lists.</li><li>Coordinate with clients on project documentation, health and safety requirements and subcontractor compliance.</li><li>Ensure standard documents are continually used and maintained. These include but are not restricted to progress schedules, technical submittals, RFI’s, etc. Ensure customer satisfaction is maintained.</li><li>Leadership in the resolution of issues or conflicts, healthy decision-making is utilized and recorded, Ensures that the close out activities are completed.</li><li>Attend regular meetings (on work progress, coordination, design, etc.) with Main Contractor and Consultant to discuss key issues related to the project and take effective corrective actions.</li><li>Monitor project budgets and schedule and oversee performance to ensure on time, quality and on budget project execution.</li><li>Provides guidance, managerial, technical support to complete project team.</li><li>Lead and Communicate with project site engineers, subcontractors and vendors to assist them in working to the Project schedule.</li><li>Represent GEC with customers, clients, consultants, Government Authorities, vendors and subcontractors.</li><li>Review subcontractor references, obtain Subcontractor bonds, and maintain project files.</li><li>Attend all schedule and management MEP meetings necessary to monitor and manage the projects, chairing as appropriate.</li><li>Manage all requisitions and payments including lien releases and project payroll and maintains best possible cash flow throughout the project, communicating issues proactively.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>QUALIFICATIONS &amp; COMPETENCIES:</p><p><br></p><ul><li>Bachelor Degree in Mechanical Engineering from a recognized institute.</li><li>Experience with minimum 10 + years in progressively responsible Project Management roles leading larger teams in the MEP industry.</li><li>Must be certificate holder of PMP (Project Management Professional).</li><li>Strong problem solving, negotiations and creative skills.</li><li>High level of integrity and dependability with a strong sense of urgency and results-orientation. </li><li>Excellent command in English and Arabic.</li><li>Self-driven, detail-oriented with analytical mindset.</li><li>Excellent interpersonal and communication skills.</li><li>Decision Making &amp; Leadership Skills.</li><li>Strategy Development &amp; Technical Competence.</li><li>Project Planning &amp;Team Management.</li><li>Risk Management.</li><li>Cost Management.</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are looking for an experienced <b>After Sales Manager – Technical Support</b> to establish and lead a dedicated post-sales technical support function for an elevator and components business.</p><p>The successful candidate will provide technical support to internal Installation and Maintenance teams, as well as external B2B elevator installers and component customers. The role will serve as a technical authority, supporting installation, commissioning, troubleshooting, controller programming, and product-related technical issues.</p><p>Key Responsibilities</p><ul><li>Establish and manage a structured technical support hotline/helpdesk through phone, email, and Odoo ticketing.</li><li>Provide second-line technical support to Installation teams for commissioning issues, controller programming, and non-standard configurations.</li><li>Support Maintenance teams with complex elevator breakdown diagnostics and troubleshooting.</li><li>Provide technical assistance to independent installers purchasing complete elevators from the Factory.</li><li>Support customers purchasing elevator components, including machines, controllers, door operators, and landing mechanisms.</li><li>Prepare and maintain installation manuals, wiring diagrams, commissioning checklists, troubleshooting guides, and technical FAQs.</li><li>Coordinate with R&amp;D, Quality, Factory, Installation, Maintenance, and Sales teams to resolve recurring technical issues.</li><li>Identify recurring field issues and provide feedback to R&amp;D and Factory teams for product and process improvement.</li><li>Develop and deliver technical training sessions for independent installers and component customers.</li><li>Monitor technical support KPIs, including response time, resolution time, and first-time-fix rate.</li><li>Escalate critical technical, safety, cost, or reputational issues to the COO.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>equirements</p><ul><li>Bachelor’s degree in <b>Electrical, Mechanical, or Mechatronic Engineering</b>.</li><li><b>6–8+ years of experience</b> in technical support, field service engineering, after-sales technical support, or product support.</li><li>Experience in the <b>elevator, MEP, industrial equipment, or related technical sector</b> is strongly preferred.</li><li>Strong hands-on knowledge of elevator machines, controllers/control panels, and door operators.</li><li>Ability to read and interpret electrical/wiring diagrams.</li><li>Experience with controller parameterization and programming.</li><li>Experience supporting external B2B customers, installers, dealers, or technical partners is an advantage.</li><li>Strong troubleshooting and problem-solving skills.</li><li>Excellent communication and customer service skills.</li><li><b>Fluent in Arabic and English.</b></li><li>Ability to work effectively under field pressure and manage multiple technical issues simultaneously</li></ul><p>Key Competencies</p><ul><li>Strong technical and product knowledge.</li><li>Excellent troubleshooting and analytical skills.</li><li>Strong communication and training abilities.</li><li>Customer-focused and service-oriented approach.</li><li>Ability to work cross-functionally with technical and commercial teams.</li><li>Strong organizational and documentation skills.</li><li>Proactive, calm, and structured approach to technical problem-solving.</li><li>Ability to build and develop a technical support function from the ground up.</li></ul><p><br></p></div>

<ul><li><p>Owns test strategy, BDD framework, automation coverage targets, and QA team co-management.</p></li><li><p>Lead the QA automation testing function, ensuring efficiency, reliability, and scalable automated testing across software applications.</p></li><li><p>Define and implement automation testing strategies, frameworks, standards, and best practices aligned with the software delivery lifecycle.</p></li><li><p>Design, develop, and maintain automated test scripts for functional, regression, API, integration, and end-to-end testing.</p></li><li><p>Select and implement appropriate automation tools and frameworks to improve test coverage, execution speed, and quality assurance effectiveness.</p></li><li><p>Integrate automated testing into CI/CD pipelines to support continuous testing and faster software releases.</p></li><li><p>Review requirements, user stories, and technical specifications to create comprehensive test scenarios and automation plans.</p></li><li><p>Manage automated test execution, analyze results, identify defects, and collaborate with development teams for resolution.</p></li><li><p>Maintain automation frameworks, improve test stability, and reduce manual testing efforts through continuous optimization.</p></li><li><p>Establish QA automation metrics, reporting dashboards, and quality indicators to track testing effectiveness.</p></li><li><p>Support defect management, root cause analysis, and production issue validation.</p></li><li><p>Provide technical guidance, coaching, and mentoring to QA automation engineers.</p></li><li><p>Ensure adherence to testing standards, quality processes, and organizational governance requirements. </p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in computer science, Software Engineering, Information Technology, Computer Engineering, or a related field.</p></li><li><p>ISTQB Certified Tester (Foundation Level / Advanced Test Automation Engineer)</p></li><li><p>Certified Selenium Tester or equivalent automation framework certification</p></li><li><p>Certified Agile Tester (CAT)</p></li><li><p>Kuwait / Transferable </p></li></ul>

<div> <p> <strong>POSITION SUMMARY</strong> </p> <p> </p> <p>Our Utility Cleaners play an important role in support of a number of vital hotel functions. At our hotels these associates may work across departments (e.g., kitchen, food and beverage, laundry) to support cleaning needs. Whether preparing fresh clean linen and spotless dining ware for guests to enjoy, operating and maintaining cleaning equipment and tools (e.g., dish washing machines, hand wash stations, linen washers and dryers), or transporting dishware or linens across the hotel, these associates do whatever it takes to get the job done.</p> <p> </p> <p>No matter what position you are in, there are a few things that are critical to success creating a safe workplace, following company policies and procedures, upholding quality standards, and ensuring your uniform, personal appearance, and communications are professional. Ensure adherence to quality expectations and standards, develop and maintain positive working relationships with other employees and departments, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Report accidents, injuries, and unsafe work conditions to manager. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Stand, sit, or walk for an extended period of time. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors.</p> <p> </p> <p><b><br></b></p><p><b>PREFERRED QUALIFICATIONS</b></p> <p>Education: No high school diploma or G.E.D. equivalent.</p> <p>Related Work Experience: No related work experience.</p> <p>Supervisory Experience: No supervisory experience.</p> <p>License or Certification: None</p> <p> </p> <p> </p> </div> <div> </div> <p><br></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>As a Senior Network Administrator, you will be responsible for the design, implementation, and maintenance of the company's network infrastructure. You will work closely with the IT team to ensure that the network meets the needs of the organization and remains secure and reliable. You will also provide technical support and troubleshooting for network issues. Direct Supervisor:&nbsp;Manager – Network, IT Department:&nbsp;PWC Technology Job Classification: Sr. Professional Matrix Supervisor: none Direct Report/s:&nbsp;none&nbsp;Local Kuwait&nbsp;&nbsp;&nbsp;Regional _________&nbsp;&nbsp;Global Your Responsibilities • Design and implement network solutions based on business requirements • Configure and maintain network equipment, including switches, routers, and firewalls • Monitor and optimize network performance • Perform routine network maintenance tasks, such as software upgrades and patch management • Troubleshoot network issues and provide timely resolution • Collaborate with other IT teams to ensure seamless integration of network infrastructure • Stay up to date with the latest network technologies and trends </p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Your Qualifications • Bachelor's degree in Computer Science, Information Technology, or a related field • Minimum of 5 years of experience in network administration or a related role • Cisco Certified Network Professional (CCNP) certification or equivalent • Strong knowledge of networking concepts and protocols, such as TCP/IP, DNS, DHCP, VLANs Your Proficiencies • Experience with network monitoring and troubleshooting tools • Excellent problem-solving skills and attention to detail • Effective communication and collaboration skills • Ability to work independently and handle multiple tasks • Knowledge of security best practices and experience with network security technologies • Analytical and troubleshooting skills&nbsp;</p></div>

<p>To provide specialized services related to the design and construction of orthodontic appliances, and to participate in prosthetics work covering both full and partial removable appliances.</p><p>Design and construct the orthodontic appliances for each case by receiving master impression from orthodontic clinic via supervisor and discusses course of action, duration of work and potential problems with supervisor. </p><p>Specialized in the technical aspect of orthodontic work according to the latest technology applied i.e. construct appliances to the specification of the orthodontist by preparing study models, fixing springs, retraction hooks and expansion screws to ensure desired effect, assembling on to a master model, waxing on to a base and processing in acrylic resin.</p><p>Construct both full and partially upper and lower denture by designing wax bite block, selecting teeth and carving them to desired shape, processing with acrylic resin and trimming and polishing. </p><p>Design and construct silver cap splints for (fractured jaws) injuries by preparing a model on an articulator to re-produce patient bites, involves positioning, locking plates and soldering the splints to the locking plates. </p><p>Carries out other related duties such as maintaining workbench equipment in a safe manner, assisting colleagues by undertaking prosthetic activities as workload demands. </p><p><strong>Desired Candidate Profile</strong></p><p>Education: Diploma in Dental Technology plus advanced diploma (or equivalent experiences) from a recognized institution.</p><p>Experience: 6 years.</p><p>Practicing license from Ministry of Health – Kuwait. </p>

<p>POSITION SUMMARY Our Utility Cleaners play an important role in support of a number of vital hotel functions. At our hotels these associates may work across departments (e.g., kitchen, food and beverage, laundry) to support cleaning needs. Whether preparing fresh clean linen and spotless dining ware for guests to enjoy, operating and maintaining cleaning equipment and tools (e.g., dish washing machines, hand wash stations, linen washers and dryers), or transporting dishware or linens across the hotel, these associates do whatever it takes to get the job done. No matter what position you are in, there are a few things that are critical to success creating a safe workplace, following company policies and procedures, upholding quality standards, and ensuring your uniform, personal appearance, and communications are professional. Ensure adherence to quality expectations and standards, develop and maintain positive working relationships with other employees and departments, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Report accidents, injuries, and unsafe work conditions to manager. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Stand, sit, or walk for an extended period of time. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>No high school diploma or G.E.D. equivalent.</li><li>No related work experience.</li><li>No supervisory experience.</li><li>None</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION SUMMARY Our Utility Cleaners play an important role in support of a number of vital hotel functions. At our hotels these associates may work across departments (e.g., kitchen, food and beverage, laundry) to support cleaning needs. Whether preparing fresh clean linen and spotless dining ware for guests to enjoy, operating and maintaining cleaning equipment and tools (e.g., dish washing machines, hand wash stations, linen washers and dryers), or transporting dishware or linens across the hotel, these associates do whatever it takes to get the job done. No matter what position you are in, there are a few things that are critical to success creating a safe workplace, following company policies and procedures, upholding quality standards, and ensuring your uniform, personal appearance, and communications are professional. Ensure adherence to quality expectations and standards, develop and maintain positive working relationships with other employees and departments, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Report accidents, injuries, and unsafe work conditions to manager. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Stand, sit, or walk for an extended period of time. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>PREFERRED QUALIFICATIONS</h2><ul><li>Education: No high school diploma or G.E.D. equivalent.</li><li>Related Work Experience: No related work experience.</li><li>Supervisory Experience: No supervisory experience.</li><li>License or Certification: None</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Our Utility Cleaners play an important role in support of a number of vital hotel functions. At our hotels these associates may work across departments (e.g., kitchen, food and beverage, laundry) to support cleaning needs. Whether preparing fresh clean linen and spotless dining ware for guests to enjoy, operating and maintaining cleaning equipment and tools (e.g., dish washing machines, hand wash stations, linen washers and dryers), or transporting dishware or linens across the hotel, these associates do whatever it takes to get the job done.<br>No matter what position you are in, there are a few things that are critical to success – creating a safe workplace, following company policies and procedures, upholding quality standards, and ensuring your uniform, personal appearance, and communications are professional. Ensure adherence to quality expectations and standards, develop and maintain positive working relationships with other employees and departments, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Report accidents, injuries, and unsafe work conditions to manager. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Stand, sit, or walk for an extended period of time. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors.<br>PREFERRED QUALIFICATIONS<br>Education: No high school diploma or G.E.D. equivalent.<br>Related Work Experience: No related work experience.<br>Supervisory Experience: No supervisory experience.<br>License or Certification: None<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>At Courtyard, we’re passionate about better serving the needs of travelers everywhere. It’s what inspired us to create the first hotel designed specifically for business travelers, and it’s why the Courtyard experience today empowers our guests, no matter the purpose of their trip. We’re looking for achievers who are passionate about providing a guest experience that goes above and beyond, enjoy being part of a small yet ambitious team, and love learning how to always improve – all while having fun. <br>In joining Courtyard, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>&nbsp;construction company in Kuwait is seeking a Senior Interior Fit-Out Engineer for a hotel project currently in the close-out and final handover stage.</p><p>Employment Details:</p><p>• Project Type: Hotel Project</p><p>• Contract Duration: 3–4 months</p><p>• Expected Joining Date: Between 1 and 15 October 2026</p><p>• Monthly Salary: KWD 800–1,000, depending on qualifications and experience</p><p>• Location: Kuwait</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>• Complete and close out all outstanding interior fit-out and finishing works.</p><p>• Manage, follow up, and close all project snag lists.</p><p>• Coordinate and supervise subcontractors and site teams to complete the remaining works.</p><p>• Ensure that all rectification works comply with the approved drawings, specifications, and required quality standards.</p><p>• Arrange inspections and obtain snag clearance from the Consultant.</p><p>• Coordinate the final handover of completed works to the Consultant and Hotel Operator.</p><p>• Follow up on all required close-out and handover documentation.</p><p>Requirements:</p><p>• Bachelor’s Degree in Civil Engineering, Architecture, or a related discipline.</p><p>• 10–12 years of relevant experience in interior fit-out and finishing works.</p><p>• Previous experience in hotel or high-end hospitality projects is highly preferred.</p><p>• Strong experience in project close-out, snag-list management, inspections, and final handover.</p><p>• Good knowledge of joinery, gypsum board, marble, ceilings, flooring, painting, and other finishing works.</p><p>• Strong coordination skills with consultants, hotel operators, subcontractors, MEP teams, and suppliers.</p><p>• Candidates must currently be residing in Kuwait.</p><p>• Candidates must be available to join between 1 and 15 October 2026.</p></div>