Heavy equipment mechanical engineer Jobs - Capital Governorate (Kuwait) Kuwait

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>PREFERRED QUALIFICATIONS</h2><p>Education: High school diploma or G.E.D equivalent. Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting. Experience in hotel engineering or maintenance a plus. Supervisory Experience: No supervisory experience.</p><h2>REQUIRED QUALIFICATIONS</h2><p>License or Certification: Driver s License</p><p></p></section>

Others<br><br> Job Id :100195306<br><br>Hire Resume Writers<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>A leading Oil & Gas company in Kuwait is looking for the position of a Boom Truck Operator<br><br>Candidates must have experience in driving Boom Trucks.<br><br>Candidates must have 2 licenses (Heavy & Operator license)<br><br>Salary Range: KWD 250 + Company Accommodation<br><br>Interested candidates with a transferable visa who can join immediately are encouraged to send their updated resume via Whats App at +965 9667 0984<br><br>Basic Details<br><br>salary : 250 KD<br><br>Qualification<br><br>Posted : 2 days ago<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Learn Arabic Online<br><br>Contact Info<br><br>Mobile : +965 96670984<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : Not-Mentioned

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Long Description <br><br>Job Summary <br></span><p>Drive a truck (HGV) primarily to deliver or pick up merchandise or to deliver packages. May load and unload vehicle.</p><br> <br><br>Job Responsibilities <br><ul> <li>Ensuring that trucks and vehicles are always clean and well driven so as to represent the company correctly;</li> <li>Following delivery schedules;</li> <li>Using the company mobile phones in a proper mannner and strictly only for business purposes;</li> <li>Ensuring all trucks and vehicles are maintained and fuelled correctly according to schedule;</li> <li>Overseeing the correct loading and unloading of vehicles;</li> <li>Assisting Installers with delivery and assembly;</li> <li>Driving in a manner which ensures the products and staff are safe;</li> <li>Having sound knowledge of the country and area for delivery and checking destination knowledge in advance with Supervisor/Manager of unknown;</li> <li>Follow the strictest of road safety procedures and local driving laes without fail;</li> <li>Taking care not to damage product.</li> </ul> <br><br>Candidate Requirements <br><ul> <li>Full and clean Heavy Goods Vehicle driving license;</li> <li>Minimum 2 years driving experience;</li> <li>Written and spoken English;</li> </ul> <br><br>Education <br>Bachelor’s Degree<br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Hiring for Kuwait for the long-term project.<br><br>Requirements &amp; Qualifications<br><br><br></span><ul><li><span><span><b>Education:</b> Diploma in Mechanical Engineering or ITI (Industrial Training Institute) / Trade Certificate in Machinist or Fitter.</span></span><br><br></li><li><span><span><b>Experience:</b> Minimum 5 to 7 years of hands-on mechanical maintenance experience in oil &amp; gas, refineries, petrochemical, or power plants.</span></span><br></li><li><span><span><b>Specially for motor maintenance activities and alignment</b></span></span></li><li><span><span><b>Technical Skills:</b></span></span><ul><li><span><span>Proficient in reading piping and instrumentation diagrams (P&amp;IDs), mechanical blueprints, and equipment manuals.</span></span><br></li><li><span><span>Strong knowledge of mechanical seals, bearings, couplings, and alignment techniques.</span></span><br></li><li><span><span>Experience with rigging, lifting, and handling heavy machinery using cranes or hoists.</span></span><br></li></ul><br></li></ul>Contact Details:<br>8928069532&nbsp;<br>Email ID: amberesumes@indianpersonnel.com<br>Regards,<br>Ambe International&nbsp;<br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a skilled Diesel Mechanic to join our dynamic team within the construction and building industry in Kuwait. This role is crucial as it involves maintaining and repairing our fleet of heavy diesel machinery, which is essential for our ongoing projects. As a Diesel Mechanic, you will have the opportunity to work with cutting-edge technology and equipment, ensuring that our operations run smoothly and efficiently. This position not only offers a chance to showcase your technical skills but also provides a pathway for career advancement within our organization.</p><p>In this role, you will be part of a collaborative team that values innovation and continuous improvement. We believe in fostering a supportive work environment where employees can grow and develop their skills. You will receive training and mentorship from experienced professionals who are dedicated to your success. Our company culture emphasizes teamwork, respect, and shared goals, allowing you to thrive in your career while contributing to significant projects that make a difference in the community.</p><p>We are committed to your professional development, offering opportunities for further training and certifications in diesel technology and machinery maintenance. As you excel in your role, you will have the chance to take on more responsibilities and potentially move into supervisory or specialized positions. Join us and become a part of a company that invests in its employees and values their contributions to our success.</p><p><b>Responsibilities:</b></p><ol><li>Perform routine maintenance and repairs on diesel engines and related systems, using diagnostic tools and equipment to ensure optimal performance and compliance with safety standards.</li><li>Diagnose and troubleshoot mechanical issues in heavy machinery, utilizing your technical expertise to identify root causes and implement effective solutions.</li><li>Maintain accurate records of repairs and maintenance activities, ensuring compliance with company policies and contributing to inventory management for parts and tools.</li><li>Collaborate with other mechanics and engineers to develop maintenance schedules that minimize downtime and enhance the efficiency of our equipment.</li><li>Conduct inspections of machinery before and after use, ensuring that all safety protocols are adhered to and that equipment is in safe working condition.</li><li>Assist in the training of junior mechanics, sharing your knowledge and experience to foster a culture of learning and development within the team.</li><li>Stay updated on industry trends and advancements in diesel technology, applying new techniques and practices to improve maintenance processes.</li><li>Support the procurement process by advising on necessary parts and tools required for repairs and maintenance, ensuring minimal disruption to operations.</li><li>Participate in safety meetings and contribute to a culture of safety, ensuring that all work is performed in accordance with established safety regulations and best practices.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Proficient in diagnosing and repairing diesel engines and components.</li><li>Strong understanding of hydraulic and electrical systems in heavy machinery.</li><li>Experience with diagnostic tools and software for troubleshooting mechanical issues.</li><li>Ability to read and interpret technical manuals and schematics.</li><li>Excellent problem-solving skills and attention to detail.</li><li>Strong communication skills for effective collaboration with team members.</li><li>Commitment to safety and adherence to industry regulations.</li></ul></div>

<p>Job Overview The TCP Specialist Wireline is responsible for planning, preparing, and executing Tubing Conveyed Perforating (TCP) operations safely and efficiently in support of customer well completion and intervention activities. This role provides advanced technical expertise in TCP systems, explosive handling, pressure control equipment, and perforating technologies while ensuring compliance with Weatherford operational procedures, HSE standards, and customer requirements. Working closely with customers, drilling and completion teams, field operations, and engineering personnel, the TCP Specialist serves as the technical lead for TCP operations, ensuring equipment readiness, operational excellence, service quality, and successful project execution across onshore and offshore environments.</p><p>Responsibilities:</p><ul><li>Plan, coordinate, and execute Tubing Conveyed Perforating (TCP) operations in accordance with approved engineering programs, customer requirements, and Weatherford procedures.</li><li>Prepare, inspect, assemble, test, and maintain TCP equipment, perforating guns, firing heads, setting tools, and associated downhole equipment.</li><li>Ensure all explosive materials are handled, transported, stored, and utilized in compliance with company procedures and regulatory requirements.</li><li>Conduct pre-job planning, risk assessments, Job Safety Analyses (JSAs), and operational briefings before each job.</li><li>Verify equipment readiness, certification, maintenance status, and documentation prior to mobilization.</li><li>Supervise rig-up, pressure testing, execution, troubleshooting, and rig-down of TCP equipment at customer well sites.</li><li>Monitor operational performance and resolve technical issues during well completion and perforating operations.</li><li>Coordinate activities with customer representatives, drilling contractors, rig personnel, and other service providers to ensure seamless execution.</li><li>Prepare accurate operational reports, service tickets, equipment records, and post-job documentation.</li><li>Investigate operational failures, perform root cause analysis, and implement corrective and preventive actions.</li><li>Maintain inventory accuracy and ensure proper storage, preservation, and maintenance of TCP tools and explosive equipment.</li><li>Mentor and provide technical guidance to junior Wireline Engineers, Field Specialists, and operators.</li><li>Support new technology implementation, field trials, and continuous improvement initiatives.</li><li>Ensure compliance with Weatherford HSE policies, customer standards, API requirements, and local regulatory requirements.</li><li>Promote operational excellence, service quality, and customer satisfaction throughout all field activities.</li></ul><p>Skills:</p><ul><li>Strong knowledge of Tubing Conveyed Perforating (TCP) systems and completion operations.</li><li>Experience with perforating guns, firing heads, detonators, setting tools, and explosive systems.</li><li>Knowledge of explosive safety regulations, transportation, storage, and handling procedures.</li><li>Strong understanding of pressure control equipment (PCE) and well control principles.</li><li>Experience with wireline and completion equipment used during TCP operations.</li><li>Excellent troubleshooting and technical problem-solving skills.</li><li>Strong mechanical aptitude and equipment maintenance capabilities.</li><li>Knowledge of API standards, HSE requirements, and industry best practices.</li><li>Effective communication and customer relationship management skills.</li><li>Strong planning, organizational, and documentation skills.</li><li>Ability to work independently under demanding operational conditions.</li><li>Leadership and mentoring capabilities.</li><li>Computer proficiency in operational reporting and Microsoft Office applications.</li><li>Ability to travel and work rotational schedules in onshore and offshore environments.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Qualifications:</p><ul><li>High School Diploma, Technical Diploma, or Bachelor's degree in Mechanical Engineering, Petroleum Engineering, or a related technical discipline.</li><li>Minimum 5 8 years of Wireline experience, including significant hands-on experience in Tubing Conveyed Perforating (TCP) operations.</li><li>Proven experience supporting onshore and offshore well completion and perforating projects.</li><li>Strong knowledge of pressure control equipment, perforating systems, and well intervention practices.</li><li>Valid IWCF or IADC Well Control Certification is preferred.</li><li>Valid explosives handling certification or equivalent regulatory authorization (where applicable).</li><li>Offshore certifications such as BOSIET, H S, First Aid/CPR, and medical certification are preferred for offshore assignments.</li><li>Experience working with Weatherford TCP systems and operational procedures is highly desirable.</li><li>Strong commitment to safety, operational excellence, quality, and customer service.</li><li>Willingness to travel internationally and work rotational field assignments as required.</li></ul><p>#LI-MD1 Weatherford supports the sustainable development and production of oil and gas resources, wherever they exist, to ensure the world’s current and future energy needs can be met safely, efficiently and economically.</p>

<strong>Overview</strong> <br> <br> <p> <strong>**This position will be physically located in Kuwait**</strong> </p> <p> </p> <p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p> <p> </p> <p>Under the supervision of the Project Manager (PM), the Lead Technical Inspector (Quality Assurance) performs Field and Sustainment-Level Initial, In-Process, Verification, and Final Inspections of equipment and process outputs, in support of LOGCAP V Contract. As Lead technical Inspector, provide technical guidance and supervision to subordinates. Perform estimated Cost of Damage (ECOD), Actual Cost of Damage (ACOD), Estimated Costs of Fabrications (ECOF) and Estimated Cost of Repair (ECOR) inspections and verify condition codes. Performs Quality Assurance/Quality Control (QA/QC) functions. Understands all shop functional requirements and provides assistance and coverage whenever needed.</p> <br> <strong>Responsibilities</strong> <br> <br> <p> <em> <span>This position description is subject to change at any time as needed to meet the requirements of the program or company.</span></em> </p> <ul> <li> <p>Perform initial, in-progress and final inspections on IAW applicable Army Regulations, Technical Manual &amp; Industry Standards.</p> </li> <li> <p>Reads blueprints, sketches and modification orders to plan the process and layout to be performed in an expeditious, economical and effective manner.</p> </li> <li> <p>Input all deficiencies and shortcoming as well as parts needed in GCSS-Army </p> </li> <li> <p>Conduct research for manuals and parts</p> </li> <li> <p>Determines type and quantity of material, and orders material required to perform repair or fabrication IAW customer work request.</p> </li> <li>Assists in coaching subordinates in ensuring all current Internal Operating Procedures (IOP) and quality regulations are complied with.</li> <li>Completes and reviews work order documentation to ensure for accuracy and completeness.</li> <li>Responsible for observing all current ES&amp;H and fire regulations. Ensures a safe work area by ensuring employees are utilizing appropriate personal protective equipment (PPE), warning devices, and proper vehicle/equipment placement.</li> <li>Prepares necessary paperwork showing labor and supplies used for job order.</li> <li>Uses proper Test, Measurement and Diagnostic Equipment (TMDE) in the daily operations phase.</li> <li>Interprets technical references.</li> <li>Performs other duties and assignments as required.</li> </ul> <br> <strong>Qualifications</strong> <br> <br> <ul> <li> <strong>Education/Certifications: </strong> <br> <ul> <li>One year related experience may be substituted for one year of education, if degree is required.</li> <li>High school diploma or equivalent. Must provide a copy of the diploma.</li> <li>Formal training (completion of MOS 91C, D, J or L course conducted under the auspices of the USA Ordinance School) is mandatory or meet verifiable civilian acquired skills criteria. </li> <li>Must be CAC eligible and/or able to obtain a Common Access Card (CAC)</li> <li>Must be a U.S. Citizen</li> <li>A valid driver s license and the ability to obtain a U. S. Government Motor Vehicle Operator s License and host nation Driver s License, is required.</li> <li>A valid driver s license and the ability to obtain a U.S. Government Motor Vehicle Operator s License and Kuwait Heavy Duty Driver s License.</li> </ul> </li> <li> <strong>Experience:</strong> <br> <ul> <li>Minimum of (2) years of experience as a heating, ventilation, and air conditioning (HVAC) technician; or a combination of formal training and experience totaling.</li> <li>A minimum of 8-10 years of experience performing technical inspection of tactical military equipment is required with a minimum of two (2) years of experience in supervisory leadership.</li> </ul> </li> <li> <strong>Skills:</strong> <br> <ul> <li>Strong interpersonal and negotiation skills.</li> <li>Collaborative work style fostering cooperation and teamwork.</li> <li>Ability to work effectively with employees and management of all levels to include multi-national staff, superiors, and ranking military officers.</li> <li>Ability to handle confidential company and employee information with complete discretion.</li> <li>High-level communication skills in English, both verbally and written.</li> <li>Basic proficiency in Word, Excel, and Outlook applications.</li> <li>High-level organization and planning skills so workflow is managed efficiently and accurately.</li> <li>Ability to read, analyzes, and interprets reports and documents.</li> <li>Expert knowledge in welding and repair requirements for military equipment/ferrous and nonferrous metals using oxyacetylene, electric arc, and inert gas welding equipment.</li> <li>Expert knowledge of Field Level Maintenance Metal Worker tasks.</li> <li>Ability to obtain a CAC and GCSS-Army access.</li> </ul> </li> <li> <strong>Working Conditions:</strong> <br> <ul> <li>Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit.</li> <li>Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months).</li> <li>Includes some industrial production environment conditions as well.</li> </ul> </li> <li> <strong>Physical Requirements:</strong> <br> <ul> <li>Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.</li> <li>Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents.</li> <li>Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices.</li> <li>Must comply with all Fire and Safety Regulations and post policies.</li> </ul> </li> </ul> <p> </p>

Job Overview<br><br> JOB DESCRIPTION <br><br>The TCP Specialist – Wireline is responsible for planning, preparing, and executing Tubing Conveyed Perforating (TCP) operations safely and efficiently in support of customer well completion and intervention activities. This role provides advanced technical expertise in TCP systems, explosive handling, pressure control equipment, and perforating technologies while ensuring compliance with Weatherford operational procedures, HSE standards, and customer requirements.<br><br>Working closely with customers, drilling and completion teams, field operations, and engineering personnel, the TCP Specialist serves as the technical lead for TCP operations, ensuring equipment readiness, operational excellence, service quality, and successful project execution across onshore and offshore environments.<br><br>Responsibilities<br><br> Plan, coordinate, and execute Tubing Conveyed Perforating (TCP) operations in accordance with approved engineering programs, customer requirements, and Weatherford procedures. Prepare, inspect, assemble, test, and maintain TCP equipment, perforating guns, firing heads, setting tools, and associated downhole equipment. Ensure all explosive materials are handled, transported, stored, and utilized in compliance with company procedures and regulatory requirements. Conduct pre-job planning, risk assessments, Job Safety Analyses (JSAs), and operational briefings before each job. Verify equipment readiness, certification, maintenance status, and documentation prior to mobilization. Supervise rig-up, pressure testing, execution, troubleshooting, and rig-down of TCP equipment at customer well sites. Monitor operational performance and resolve technical issues during well completion and perforating operations. Coordinate activities with customer representatives, drilling contractors, rig personnel, and other service providers to ensure seamless execution. Prepare accurate operational reports, service tickets, equipment records, and post-job documentation. Investigate operational failures, perform root cause analysis, and implement corrective and preventive actions. Maintain inventory accuracy and ensure proper storage, preservation, and maintenance of TCP tools and explosive equipment. Mentor and provide technical guidance to junior Wireline Engineers, Field Specialists, and operators. Support new technology implementation, field trials, and continuous improvement initiatives. Ensure compliance with Weatherford HSE policies, customer standards, API requirements, and local regulatory requirements. Promote operational excellence, service quality, and customer satisfaction throughout all field activities. <br><br>Skills<br><br> Strong knowledge of Tubing Conveyed Perforating (TCP) systems and completion operations. Experience with perforating guns, firing heads, detonators, setting tools, and explosive systems. Knowledge of explosive safety regulations, transportation, storage, and handling procedures. Strong understanding of pressure control equipment (PCE) and well control principles. Experience with wireline and completion equipment used during TCP operations. Excellent troubleshooting and technical problem-solving skills. Strong mechanical aptitude and equipment maintenance capabilities. Knowledge of API standards, HSE requirements, and industry best practices. Effective communication and customer relationship management skills. Strong planning, organizational, and documentation skills. Ability to work independently under demanding operational conditions. Leadership and mentoring capabilities. Computer proficiency in operational reporting and Microsoft Office applications. Ability to travel and work rotational schedules in onshore and offshore environments. <br><br>Qualifications<br><br> High School Diploma, Technical Diploma, or Bachelor's degree in Mechanical Engineering, Petroleum Engineering, or a related technical discipline. Minimum 5–8 years of Wireline experience, including significant hands-on experience in Tubing Conveyed Perforating (TCP) operations. Proven experience supporting onshore and offshore well completion and perforating projects. Strong knowledge of pressure control equipment, perforating systems, and well intervention practices. Valid IWCF or IADC Well Control Certification is preferred. Valid explosives handling certification or equivalent regulatory authorization (where applicable). Offshore certifications such as BOSIET, H₂S, First Aid/CPR, and medical certification are preferred for offshore assignments. Experience working with Weatherford TCP systems and operational procedures is highly desirable. Strong commitment to safety, operational excellence, quality, and customer service. Willingness to travel internationally and work rotational field assignments as required.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>Job Overview</strong></span></p><br><p><span>The TCP Specialist – Wireline is responsible for planning, preparing, and executing Tubing Conveyed Perforating (TCP) operations safely and efficiently in support of customer well completion and intervention activities. This role provides advanced technical expertise in TCP systems, explosive handling, pressure control equipment, and perforating technologies while ensuring compliance with Weatherford operational procedures, HSE standards, and customer requirements.</span></p><br><p><span>Working closely with customers, drilling and completion teams, field operations, and engineering personnel, the TCP Specialist serves as the technical lead for TCP operations, ensuring equipment readiness, operational excellence, service quality, and successful project execution across onshore and offshore environments.</span></p><br><p><span><strong>Responsibilities:</strong></span></p><br><ul><li><span>Plan, coordinate, and execute Tubing Conveyed Perforating (TCP) operations in accordance with approved engineering programs, customer requirements, and Weatherford procedures.&nbsp;</span></li><li><span>Prepare, inspect, assemble, test, and maintain TCP equipment, perforating guns, firing heads, setting tools, and associated downhole equipment.&nbsp;</span></li><li><span>Ensure all explosive materials are handled, transported, stored, and utilized in compliance with company procedures and regulatory requirements.&nbsp;</span></li><li><span>Conduct pre-job planning, risk assessments, Job Safety Analyses (JSAs), and operational briefings before each job.&nbsp;</span></li><li><span>Verify equipment readiness, certification, maintenance status, and documentation prior to mobilization.&nbsp;</span></li><li><span>Supervise rig-up, pressure testing, execution, troubleshooting, and rig-down of TCP equipment at customer well sites.&nbsp;</span></li><li><span>Monitor operational performance and resolve technical issues during well completion and perforating operations.&nbsp;</span></li><li><span>Coordinate activities with customer representatives, drilling contractors, rig personnel, and other service providers to ensure seamless execution.&nbsp;</span></li><li><span>Prepare accurate operational reports, service tickets, equipment records, and post-job documentation.&nbsp;</span></li><li><span>Investigate operational failures, perform root cause analysis, and implement corrective and preventive actions.&nbsp;</span></li><li><span>Maintain inventory accuracy and ensure proper storage, preservation, and maintenance of TCP tools and explosive equipment.&nbsp;</span></li><li><span>Mentor and provide technical guidance to junior Wireline Engineers, Field Specialists, and operators.&nbsp;</span></li><li><span>Support new technology implementation, field trials, and continuous improvement initiatives.&nbsp;</span></li><li><span>Ensure compliance with Weatherford HSE policies, customer standards, API requirements, and local regulatory requirements.&nbsp;</span></li><li><span>Promote operational excellence, service quality, and customer satisfaction throughout all field activities.&nbsp;</span></li></ul><p><span><strong>Skills:</strong></span></p><br><ul><li><span>Strong knowledge of Tubing Conveyed Perforating (TCP) systems and completion operations.&nbsp;</span></li><li><span>Experience with perforating guns, firing heads, detonators, setting tools, and explosive systems.&nbsp;</span></li><li><span>Knowledge of explosive safety regulations, transportation, storage, and handling procedures.&nbsp;</span></li><li><span>Strong understanding of pressure control equipment (PCE) and well control principles.&nbsp;</span></li><li><span>Experience with wireline and completion equipment used during TCP operations.&nbsp;</span></li><li><span>Excellent troubleshooting and technical problem-solving skills.&nbsp;</span></li><li><span>Strong mechanical aptitude and equipment maintenance capabilities.&nbsp;</span></li><li><span>Knowledge of API standards, HSE requirements, and industry best practices.&nbsp;</span></li><li><span>Effective communication and customer relationship management skills.&nbsp;</span></li><li><span>Strong planning, organizational, and documentation skills.&nbsp;</span></li><li><span>Ability to work independently under demanding operational conditions.&nbsp;</span></li><li><span>Leadership and mentoring capabilities.&nbsp;</span></li><li><span>Computer proficiency in operational reporting and Microsoft Office applications.&nbsp;</span></li><li><span>Ability to travel and work rotational schedules in onshore and offshore environments.&nbsp;</span></li></ul><p><span><strong>Qualifications:</strong></span></p><br><ul><li><span>High School Diploma, Technical Diploma, or Bachelor's degree in Mechanical Engineering, Petroleum Engineering, or a related technical discipline.&nbsp;</span></li><li><span>Minimum 5–8 years of Wireline experience, including significant hands-on experience in Tubing Conveyed Perforating (TCP) operations.&nbsp;</span></li><li><span>Proven experience supporting onshore and offshore well completion and perforating projects.&nbsp;</span></li><li><span>Strong knowledge of pressure control equipment, perforating systems, and well intervention practices.&nbsp;</span></li><li><span>Valid IWCF or IADC Well Control Certification is preferred.&nbsp;</span></li><li><span>Valid explosives handling certification or equivalent regulatory authorization (where applicable).&nbsp;</span></li><li><span>Offshore certifications such as BOSIET, H₂S, First Aid/CPR, and medical certification are preferred for offshore assignments.&nbsp;</span></li><li><span>Experience working with Weatherford TCP systems and operational procedures is highly desirable.&nbsp;</span></li><li><span>Strong commitment to safety, operational excellence, quality, and customer service.&nbsp;</span></li><li><span>Willingness to travel internationally and work rotational field assignments as required.</span></li></ul><p><span>#LI-MD1</span></p><br><br> </div>

Boom Truck Operator<br><br> Job Id :100195337<br><br>Jobboard subscription<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>A leading Oil and Gas company in Kuwait is hiring for the position of Boom Truck Operator<br><br> Candidates must have experience driving in Boom Truck Operator in Kuwait. Candidates must have both licenses (Heavy License and Operating License - Inshaya). Salary: KWD 250 + Company Accommodation<br><br>Interested candidates with a transferable visa who can join immediately or within 1 month are encouraged to send their updated resume via Whats App at +965 9667 0984.<br><br>Basic Details<br><br>salary : 250 KWD<br><br>Location : Wafra , Kuwait<br><br>Qualification<br><br>Posted : Today<br><br>Job Type : Full-Time<br><br>Jobboard subscription<br><br>Company : Kuwait Jobs<br><br>Posted By: HR YZ<br><br>Contact Info<br><br>Mobile : +965 96670984<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : job707832@gmail.com

<p><h4>Job description</h4> <p>The UH-60 aircraft mechanic AM-I (UH-60) troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneumatic and hydraulic systems, engines, auxiliary power unit, and ventilation and heating systems.<br> Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.<br> Service and lubricate aircraft and subsystems.<br> Safely prepare aircraft for inspections and maintenance checks and services.<br> Perform scheduled inspections and assist in performing special inspections.<br> Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.<br> Use and perform operator maintenance on tools, special tools and aircraft ground support equipment.<br> Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft technical manuals, maintenance information and action messages and all technical guidance provided through government official representatives.<br> Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.<br> Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and/or operation.<br> Participate in maintenance test flights and operation checks as required.<br> Perform other duties as requested.</p> <h4>Minimum requirements</h4> <ul> <li>High school diploma or equivalent required.</li> <li>A valid up-to-date FAA A&P certificate is preferred.</li> <li>If no FAA A&P certificate, candidate must have three (3) years aviation maintenance experience, with a minimum of two (2) years on the assigned UH-60 mission design series (MDS).</li> <li>All experience must be within the six (6) most recent years.</li> <li>Must be in possession of a U.S. passport with a minimum of two plus years validity and be able to travel internationally.</li> <li>Must be able to obtain and maintain facility public trust NAC-I. Note: US citizenship is required for facility public trust NAC-I at this work location.</li> <li>Must be able to pass the CENTCOM medical requirement to deploy.</li> <li>Must be able to obtain Kuwait visa.</li> </ul> <h4>Knowledge and skills</h4> <ul> <li>General knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</li> <li>Basic knowledge of aircraft sheet metal and structural modifications and repair.</li> <li>General knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and shears.</li> <li>Working knowledge of technical publications and logistics information systems.</li> <li>Able to prioritize workloads to maintain schedules on assigned projects.</li> <li>Participate in maintenance test flights and operation checks as required.</li> <li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical requirements and working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper personal protective equipment (PPE).</li> <li>Must be able to pass a respirator physical and fit test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>Occasionally lifts objects up to 50 pounds.</li> <li>Most heavy lifting is accomplished through the use of mechanical devices.</li> <li>May be expected to work in austere environments and all-weather conditions.</li> </ul></p><p></p>

<p> <b>The UH-60 Aircraft Mechanic AM-I (UH-60)</b> troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.</p> <ul> <li> <p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</p> </li> <li> <p>Service and lubricate aircraft and subsystems.</p> </li> <li> <p>Safely prepare aircraft for inspections and maintenance checks and services.</p> </li> <li> <p>Perform scheduled inspections and assist in performing special inspections.</p> </li> <li> <p>Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.</p> </li> <li> <p>Use and perform operator maintenance on tools, special tools and aircraft ground support equipment.</p> </li> <li> <p>Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives.</p> </li> <li> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> </li> <li> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation.</p> </li> <li> <p>Participate in maintenance test flights and operation checks as required.</p> </li> <li> <p>Perform other duties as requested.</p> </li> </ul> <p> </p> <p> <b>Minimum Requirements:</b> </p> <ul> <li> <p>High School Diploma or equivalent required.</p> </li> <li> <p>A valid up-to-date FAA A&amp;P certificate is preferred.</p> </li> <li> <p>If No FAA A&amp;P certificate; candidate Must have Three (3) years aviation maintenance experience, with a minimum of two (2) years on the assigned <b>UH-60 </b>Mission Design Series (MDS). </p> </li> <li> <p>All experience must be within the Six (6) most recent years. </p> </li> <li> <p>Must be in possession of a U.S. Passport with a min. 2 plus years validity and be able to travel internationally.</p> </li> <li> <p>Must be able to obtain and maintain facility Public Trust NAC-I. Note: <b>US Citizenship is required </b>for facility Public Trust NAC-I at this work location.</p> </li> <li> <p>Must be able to pass the CENTCOM Medical requirement to deploy.</p> </li> <li> <p>Must be able to obtain Kuwait Visa</p> </li> </ul> <p> </p> <p> <b>Knowledge &amp; Skills</b> </p> <ul> <li> <p>General knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</p> </li> <li> <p>Basic knowledge of aircraft sheet metal/structural modifications and repair.</p> </li> <li> <p>General knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</p> </li> <li> <p>Working knowledge of technical publications and Logistics Information Systems.</p> </li> <li> <p>Able to prioritize workloads to maintain schedules on assigned projects.</p> </li> <li> <p>Participate in maintenance test flights and operation checks as required.</p> </li> <li> <p>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</p> </li> <li> <p>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, and may be required to make entries in aircraft logs and records.</p> </li> </ul> <p> </p> <p> <b>Physical Requirements/Working Environment</b> </p> <ul> <li> <p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p> </li> <li> <p>Must be able to climb stairs, ramps, ladders, and work stands.</p> </li> <li> <p>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</p> </li> <li> <p>May be required to lift heavy objects whose weight may exceed 50 pounds.</p> </li> <li> <p>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p> </li> <li> <p>Will handle dirty parts and lubricants.</p> </li> <li> <p>Will be required to wear proper Personal Protective Equipment (PPE).</p> </li> <li> <p>Must be able to pass a Respirator Physical and Fit Test qualification.</p> </li> <li> <p>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</p> </li> <li> <p>Must be able to lift/push/pull minimum of 50 pounds.</p> </li> <li> <p>May work in maintenance shop or outside.</p> </li> <li> <p>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p> </li> <li> <p>May be exposed to extreme noise from operating equipment.</p> </li> <li> <p>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p> </li> <li> <p>Occasionally lifts objects up to 50 pounds.</p> </li> <li> <p>Most heavy lifting is accomplished through the use of mechanical devices.</p> </li> <li> <p>May be expected to work in austere environments and all-weather conditions.</p> </li> </ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Basic Scope of Job:</b></p><p>Construction Engineer – Mechanical with hands-on experience in the Oil &amp; Gas industry. The ideal candidate will be responsible for supervising and coordinating Mechanical/Piping/Pipeline construction activities, Testing &amp; commissioning, ensuring installation works are executed safely on schedule, and in accordance with approved drawings, project specifications, quality requirements, codes, and client standards.</p><p><br></p><p><b>Principal Duties and Responsibilities:</b></p><ul><li>Supervise and coordinate mechanical, piping and pipeline construction activities, including installation of equipment, piping, supports, and associated mechanical systems.</li><li>Review approved-for-construction drawings, method statements, procedures, material specifications, and technical documents prior to site execution.</li><li>Ensure all mechanical, piping and pipeline works are carried out in accordance with project specifications, approved drawings, applicable codes, standards, and client requirements.</li><li>Coordinate with civil, electrical, CP, instrumentation, QA/QC, HSE, and other disciplines to resolve site interfaces and construction issues.</li><li>Monitor site progress, manpower, materials, tools, and equipment to ensure achievement of project schedules and construction targets. </li><li>Coordinate with Contractor Key personnel to accelerate the progress &amp; to provide adequate resources. Also, monitor construction progress in line with approved program of work.</li><li>Provide technical support and resolve site queries, field changes, clashes, and construction-related issues in coordination with engineering and project teams.</li><li>Ensure compliance with HSE requirements, permit-to-work procedures, company policies, and safe construction practices at all times.</li><li>Coordinate material receiving, inspection, storage, and issuance, and verify that materials and equipment comply with approved specifications and project requirements.</li><li>Support QA/QC activities including inspections, test records, punch listing, mechanical completion, pre-commissioning, and handover documentation.</li><li>Participate in construction meetings, progress reviews, site inspections, audits, and coordination meetings with clients, contractors, and subcontractors.</li><li>Prepare and maintain construction reports, progress updates, red-line markups, as-built information, and other project documentation as required.</li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Education and Qualification:</p><ul><li>Bachelor’s degree in Mechanical Engineering or a related field.</li><li>Good knowledge of construction drawings, method statements, inspection requirements, and engineering software/tools such as AutoCAD and related project systems.</li><li>Strong understanding of mechanical construction practices, equipment and piping installation, and applicable codes and standards (ASME, API, ISO, etc.)</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>The Rig Liaisonman acts as the primary link between the drilling rig site, the Drilling &amp; Technical Department (DTD), Saudi Aramco representatives, and the contractor.<br> The position is responsible for coordinating rig activities, monitoring operational performance, ensuring compliance with approved drilling programs and Saudi Aramco requirements, and facilitating timely communication and resolution of operational issues.<br> Key Responsibilities Serve as the main liaison between the rig site, DTD, Saudi Aramco representatives, and drilling contractors.<br> Coordinate daily drilling and rig-related activities with relevant departments and stakeholders.<br> Monitor rig operations to ensure compliance with approved drilling programs, procedures, safety standards, and client requirements.<br> Review and communicate daily drilling reports, operational updates, equipment status, and performance information.<br> Follow up on rig activities, operational challenges, equipment issues, and required corrective actions.<br> Coordinate with drilling engineers, rig management, wellsite supervisors, service companies, and other stakeholders.<br> Escalate operational, technical, safety, and schedule-related issues to the appropriate DTD personnel.<br> Assist in ensuring that drilling operations remain aligned with the approved program and project schedule.<br> Track the status of rig moves, rig readiness, equipment availability, maintenance requirements, and operational priorities.<br> Support coordination of logistics, materials, personnel, services, and other resources required for rig operations.<br> Participate in meetings, operational reviews, coordination meetings, and incident investigations when required.<br> Maintain accurate records and provide regular updates to DTD management.<br> Bachelor’s degree or diploma in Drilling Engineering, Petroleum Engineering, Mechanical Engineering, or a related discipline ; or equivalent relevant experience.<br> Typically 8–15 years of experience in drilling and rig operations , preferably in the oil and gas industry.<br> Previous experience working with Saudi Aramco operations or Saudi Aramco-approved contractors is highly preferred.<br> Strong knowledge of land rig operations, drilling activities, wellsite coordination, and oilfield services.<br> Experience liaising with drilling contractors, service companies, client representatives, and technical departments.<br> Familiarity with Saudi Aramco safety, operational, and reporting requirements.<br></span> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide technical expertise on fire engines, rescue vehicles, airport rescue and firefighting (ARFF) vehicles, tankers, aerial platforms, and specialized firefighting vehicles.</p><p>Review and evaluate technical specifications, drawings, datasheets, and manufacturer documentation.</p><p>Support procurement activities by preparing technical specifications, evaluating vendor proposals, and participating in technical bid evaluations.</p><p>Ensure fire vehicles comply with applicable safety regulations, operational requirements, and recognized industry standards.</p><p>Recommend fleet upgrades, modifications, and equipment improvements to enhance operational capability.</p><p>Support emergency response operations by providing technical assistance when required.</p><p>Knowledge in:</p><ul><li>Fire vehicle construction and design</li><li>Fire pumps and water delivery systems</li><li>Foam proportioning systems</li><li>Hydraulic rescue equipment</li><li>Diesel engines and powertrains</li><li>Heavy vehicle electrical and electronic systems</li><li>Pneumatic and hydraulic systems</li><li>Vehicle diagnostics and troubleshooting</li><li>Preventive and corrective maintenance</li><li>Fleet management principles</li><li>Technical specifications and procurement</li><li>Inspection, testing, and commissioning of emergency vehicles</li><li>Occupational health and safety requirements</li><li>Emergency vehicle operational standards and best practices</li></ul><p>Skills:</p><ul><li>Strong technical and analytical skills</li><li>Ability to interpret engineering drawings and technical manuals</li><li>Inspection and quality assurance</li><li>Project coordination</li><li>Vendor and supplier coordination</li><li>Communication and presentation skills</li><li>Computer proficiency, including Microsoft Office and computerized maintenance management systems (CMMS)</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in mechanical engineering, Automotive Engineering, Fire Protection Engineering, or a related engineering discipline.</p><p>Relevant professional experience in fire vehicle maintenance, emergency vehicle engineering, fleet management, or heavy vehicle maintenance.</p><p>Experience with municipal, industrial, military, or airport firefighting vehicles is preferred.</p><p></p></section>

<p>About the Role: We are seeking an experienced and hands-on Site Supervisor to oversee daily marine construction activities including dredging, piling, rock filling, quay wall construction, and subsea pipeline support works. The ideal candidate will have strong supervisory skills, practical knowledge of marine operations, and the ability to manage site crews, equipment, and subcontractors to ensure safe and efficient project execution. Key Responsibilities: • Supervise daily marine construction activities including dredging, piling, rock dumping, quay wall construction, and pipeline support works • Manage site crews including foremen, operators, riggers, and general workers; assign tasks and monitor productivity • Ensure all activities comply with approved method statements, drawings, specifications, and safety standards • Coordinate with project engineers, superintendents, and subcontractors for smooth execution of marine works • Monitor marine plant and equipment including barges, excavators, cranes, tugs, and dredgers • Conduct daily pre-start inspections of equipment and ensure all machinery is in safe working condition • Enforce HSE protocols including permits, toolbox talks, PPE compliance, and emergency procedures • Monitor material deliveries including rock, aggregates, concrete, and steel; ensure proper handling and storage • Maintain accurate daily records including work progress, manpower, equipment usage, and materials consumed • Report delays, incidents, or technical issues to the Construction Manager or Project Engineer • Liaise with survey teams for positioning, bathymetry, and as-built verification • Ensure vessels and barges are properly moored, secured, and compliant with safety regulations • Coordinate with marine coordinators for vessel movements and logistics • Conduct quality inspections to ensure work meets project specifications • Participate in daily progress meetings and provide input on construction sequences • Mentor and guide junior staff and crew members • Ensure site housekeeping and organization at all times • Assist in preparing daily and weekly progress reports for project management</p><p>Qualifications & Experience: • Diploma or certificate in Civil Engineering, Marine Engineering, Nautical Science, or related field • Minimum 5-7 years of experience as a Site Supervisor in marine construction, dredging, or offshore projects • Strong knowledge of marine construction methods including piling, dredging, rock filling, concrete works, and subsea operations • Experience with marine equipment including barges, excavators, cranes, dredgers, and tugs • Understanding of safety regulations including SOLAS, MARPOL, and local marine requirements • Valid offshore safety certifications (BOSIET/HUET) preferred if working offshore • Familiarity with permit-to-work systems and risk assessment procedures • Proficiency in MS Office; knowledge of planning software is an advantage • Fluency in English; knowledge of Hindi/Urdu or Arabic is a plus • Valid driver's license is preferred Required Skills: • Strong leadership and team management abilities • Effective communication and coordination skills • Problem-solving for operational and technical issues • Attention to detail for quality and safety compliance • Ability to work under pressure and meet deadlines • Physical fitness for on-site work in marine environments • Ability to read and interpret construction drawings and specifications</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Join our dynamic team as a Heavy Vehicle Driver in the thriving construction and building industry in Kuwait. This role is not just about driving; it’s about being an integral part of our projects that shape the urban landscape. As a Heavy Vehicle Driver, you will be responsible for transporting materials and equipment to various job sites, ensuring that our operations run smoothly and efficiently. Your expertise will contribute significantly to the success of our projects, providing you with the opportunity to grow within our organization.</p><p>We pride ourselves on fostering a supportive and collaborative work environment where every team member is valued. As you embark on this journey with us, you will receive comprehensive training and development opportunities to enhance your skills and advance your career. Our commitment to your professional growth means you will have access to ongoing learning and mentorship from experienced colleagues, allowing you to reach your full potential.</p><p>In this role, you will be at the forefront of our construction efforts, driving heavy vehicles and ensuring compliance with safety regulations. The impact of your work will be visible in the structures that rise around you, making this position both rewarding and fulfilling. If you are looking for a stable career with opportunities for advancement in a respected company, we invite you to apply and be part of our journey towards excellence in the construction industry.</p><p><b>Responsibilities:</b></p><ol><li>Safely operate heavy vehicles, including trucks and construction machinery, to transport materials to job sites, ensuring timely delivery and adherence to schedules.</li><li>Conduct pre-trip and post-trip inspections of vehicles, checking for mechanical issues and ensuring compliance with safety regulations to maintain operational integrity.</li><li>Collaborate with site supervisors and project managers to determine transportation needs and logistics, optimizing routes to enhance efficiency and reduce costs.</li><li>Load and unload materials, utilizing appropriate equipment and techniques to prevent damage and ensure safety during handling.</li><li>Maintain accurate records of deliveries, mileage, and fuel consumption, providing reports to management for tracking and analysis purposes.</li><li>Adhere to all traffic laws and company policies while driving, promoting a culture of safety and responsibility on the road.</li><li>Assist in training new drivers on safe driving practices and vehicle operation, contributing to a knowledgeable and skilled workforce.</li><li>Participate in regular safety meetings and training sessions, staying updated on best practices and regulatory changes in the construction industry.</li><li>Support other team members in various tasks as needed, demonstrating flexibility and a team-oriented approach to achieving project goals.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Proven experience operating heavy vehicles, demonstrating a strong understanding of vehicle mechanics and safety protocols.</li><li>Excellent navigation and route planning skills, ensuring timely and efficient transportation of materials.</li><li>Strong communication abilities, facilitating effective collaboration with team members and site supervisors.</li><li>Knowledge of safety regulations and compliance standards in the construction industry, ensuring adherence to best practices.</li><li>Ability to perform basic vehicle maintenance and troubleshooting, enhancing operational efficiency.</li><li>Physical stamina and strength, enabling the handling of heavy materials and equipment safely.</li><li>Commitment to continuous learning and improvement, embracing training opportunities to advance skills and knowledge.</li></ul></div>

<p>FOR KUWAIT COMPANY MANUFACTUING POSTION MECHANICAL MAINTENANCE ENGINEER 05 12 YRS, in Molding SALARY NEGOTIABLE Duty 09 hours. / 06 DAYS Online Interview Apply with all doc Contact PHONE_NUMBER /PHONE_NUMBER Email EMAIL_ADDRESS.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>maintenance of all machinery, equipment, and safety systems, including boilers, cooling towers, diesel tanks, molding machines, block machines, cutting machines, cup machines, crash machines</li></ul>

<p><h4>Division / Project</h4> <p>KBR’s Sustainable Technology Solutions (STS) group is looking for a Lead Design Engineer I - Mechanical for a 5-year PMC contract for the supply of programme management services with Kuwait Oil Company. The contract serves to support KOC to achieve its objectives of reaching optimum capacity in its oilfields and enhancing its facilities by the most efficient and economical means available.</p> <p>The contract aims to provide project management, coordination, planning, design, engineering, construction management, contracting, procurement, project controls and other services for construction of new oil field facilities, upgrading of existing facilities, and transfer of technology.</p> <h4>Primary objectives</h4> <p>To ensure mechanical equipment design integrity whilst leading the mechanical equipment engineering group on specific projects.<br> To provide specialist rotating equipment input to conceptual studies, FEEDs and detailed design for oil and gas developments.</p> <h4>Responsibilities</h4> <ul> <li>Ensure that design is fully compliant with project specification and client, international and local standards.</li> <li>Preparation of specifications for, and evaluation of, rotating equipment packages.</li> <li>Perform engineering design as required.</li> <li>Duties will include conceptual design and specification of rotating and packaged equipment and review of EPC’s detailed designs, technical bid evaluation and vendor documentation.</li> <li>Allocate work to team members. Ensure that within assigned team, personnel work within their competencies and with appropriate supervision.</li> <li>Quality assurance – responsible for working within the provisions and guidelines of the quality assurance system.</li> <li>Safety – responsible for personal safety and safe working practices. Understand and follow OH&S procedures.</li> <li>Ensure that conceptual and detail design work is appropriate for the complexity of the construction tasks and achieving a good balance between design costs and implementation costs.</li> <li>Evidence of feedback from supervisors and/or superintendents that constructability issues are addressed adequately in design and that work packs contain sufficient detail with no unnecessary content.</li> <li>Conduct site investigations, prepare reports.</li> </ul> <h4>Mandatory requirements</h4> <ul> <li>Engineering degree in a relevant discipline</li> <li>15 years of total post graduation experience</li> <li>10 years mechanical design experience in the oil and gas environment</li> <li>5 years in the stated designation</li> <li>A minimum of 3 years in automation software</li> </ul> <h4>Essential skills / experience</h4> <ul> <li>Hands on experience with large gas turbine driven compressors, pumps, generators packages is mandatory. Experience of other packaged equipment is desirable.</li> <li>Experience with the development of layouts for new facilities</li> <li>Experienced in the specification for, evaluation of and documentation for rotating equipment packages in a PMC environment would be advantageous.</li> <li>Ability to work in accordance with broad technical guidelines and with minimal supervision.</li> <li>Ability to work on multiple assignments to tight deadlines and prioritization of work to achieve them.</li> </ul> <p><strong>Decarbonization – Energy Transition – Sustainability</strong></p> <p><strong>Belong. Connect. Grow. with KBR!</strong></p></p><p></p>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions, or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems, and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential Responsibilities</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes, and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems, and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, including pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to lift, carry, and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> <li>Highly desired to have a U.S. passport valid for an additional two years with at least two facing pairs (four total) of blank visa pages.</li> </ul></p><p></p>