Equipment operator Jobs - Capital Governorate (Kuwait) Kuwait

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ol><li><p>Transport service technicians, tools, and equipment to customer sites across Kuwait.</p></li><li><p>Safely drive company vehicles (vans/pickup trucks) following all traffic laws..</p></li><li><p>Assist technicians with loading/unloading equipment, parts, and cleaning supplies as needed.</p></li><li><p>Maintain vehicle cleanliness and schedule routine maintenance (oil changes, tire pressure, fuel).</p></li><li><p>Report any vehicle damage, accidents, or maintenance issues immediately to supervisor.</p></li><li><p>Keep daily log of trips, mileage, fuel consumption, and delivery/pickup times.</p></li><li><p>Follow assigned routes and adjust for traffic or road closures as needed.</p></li><li><p>Ensure all required documents (registration, insurance, and driver’s license) are valid and in the vehicle at all times.</p></li></ol></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ol><li><p>2-3 years of experience in the same field.</p></li><li><p>Good Communication Skills with client and team. Able to speak basic Arabic and English (for reading addresses, delivery notes).</p></li><li><p>Valid Kuwait Transferable Visa and Kuwait Driving License.</p></li><li><p>Able to join immediately and can work on flexible timings.</p></li><li><p>Good knowledge of Kuwait roads, areas, and traffic regulations.</p></li><li><p>Ability to lift and carry equipment/tools (up to 20 kg).</p></li><li><p>Reliable, punctual, and responsible attitude.</p></li></ol><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>PREFERRED QUALIFICATIONS</h2><p>Education: High school diploma or G.E.D equivalent. Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting. Experience in hotel engineering or maintenance a plus. Supervisory Experience: No supervisory experience.</p><h2>REQUIRED QUALIFICATIONS</h2><p>License or Certification: Driver s License</p><p></p></section>

<p><h4>Job summary</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level electronic maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>USAF equivalent position is Avionics Technician Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Applies basic technical knowledge to solve unusually complex problems that affect operational and maintenance capabilities.</li> <li>Requires a basic understanding of the interrelationships of circuits and associated systems.</li> <li>Exercises independent judgment in performing assigned tasks in conjunction with designated direction from production staff, avionic leads, avionics/com technician IIIs, or avionics technician IIs.</li> <li>Uses common and complex test instruments in the performance of assigned duties.</li> <li>Maintains, repairs, and installs various types of electronic equipment and related devices.</li> <li>Applies basic technical knowledge of electronics principles in determining malfunctions and applies skill in restoring equipment operations.</li> <li>Must be able to work with limited supervision.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft avionics and/or GCS maintenance experience required.</li> <li>Must have basic knowledge of basic and complex electronics maintenance and repair.</li> <li>Must have basic knowledge of RFF systems, components, and accessories.</li> <li>Must possess general understanding of technical publications related to aircraft electronics maintenance.</li> <li>Must know basic theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a thorough understanding of electrical and electronic principles.</li> <li>Must be capable of using and reading blueprints, wiring diagrams, and data tables.</li> <li>Must be eligible to gain and maintain one of the following IAT Level II certifications: CCNA Security, CySA+, GICSP, Security+ CE, SSCP, or GSEC, IAW DOD 8570.01-M commensurate with the assigned duties within 90 days of hire or after the second deployment.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Current IAT Level II certification.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>MQ-9 experience as an avionics technician.</li> <li>Avionics technician experience within the last 10 years.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level electronic maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.USAF equivalent position is Avionics Technician Apprentice.Essential Responsibilities:Applies basic technical knowledge to solve unusually complex problems that affect operational and maintenance capabilities. Requires a basic understanding of the interrelationships of circuits and associated systems. Exercises independent judgment in performing assigned tasks in conjunction with designated direction from Production Staff, Avionic Leads, Avionics/Com Technician IIIs, or Avionics Technician IIs. Uses common and complex test instruments in the performance of assigned duties. Maintains, repairs, and installs various types of electronic equipment and related devices. Applies basic technical knowledge of electronics principles in determining malfunctions and applies skill in restoring equipment operations. Must be able to work with limited supervision. Performs all other duties as assigned as requested.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must have High School Diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Avionics and/or GCS maintenance experience required.</li><li>Must have basic knowledge of basic and complex electronics maintenance and repair.</li><li>Must have basic knowledge of RFF systems, components, and accessories.</li><li>Must possess general understanding of technical publications related to Aircraft electronics maintenance.</li><li>Must know basic theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a thorough understanding of electrical and electronic principles.</li><li>Must be capable of using and reading blueprints, wiring diagrams, and data tables.</li><li>Must be eligible to gain and maintain one of the following IAT Level II certifications: CCNA Security, CySA+, GICSP, Security+ CE, SSCP, or GSEC, IAW DOD 8570.01-M commensurate with the assigned duties within 90 days of hire or after the second deployment.</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months.</li><li>Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must have current/active State Issued Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster.</li><li>Accommodations may be available under limited circumstances.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Develop technical specifications, scopes of work, and procurement documents for IAQ and environmental systems. Review engineering drawings, technical datasheets, product catalogs, test reports, and manufacturer documentation. Evaluate supplier technical proposals and verify compliance with project specifications and applicable standards. Prepare technical bid evaluation reports and provide recommendations for supplier selection. Ensure procured equipment complies with applicable environmental, health, and safety regulations. Manage procurement activities from technical evaluation through delivery, installation, and warranty support. Maintain technical documentation, procurement records, equipment specifications, and asset information.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in environmental engineering, Environmental Science, Chemical Engineering, Industrial Engineering, or a related field. Minimum experience in technical procurement, engineering, HVAC, indoor air quality, environmental systems, or related technical fields. Experience with public-sector procurement, EPC projects, or facility management is an advantage.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> </p> <ul> <li> <strong>Install and Configure Network Equipment</strong> </li> <li>Set up routers, switches, firewalls, wireless access points, and network cabling. </li> <li>Configure LAN, WAN, VPN, and wireless networks. </li> <li> <strong>Monitor Network Performance</strong> </li> <li>Continuously monitor network availability and performance. </li> <li>Identify and resolve network bottlenecks and outages. </li> <li>Ensure maximum uptime and reliability. </li> <li> <strong>Troubleshoot Network Issues</strong> </li> <li>Diagnose hardware, software, and connectivity problems. </li> <li>Resolve internet, server, and communication issues. </li> <li>Provide technical support to employees experiencing network-related problems. </li> <li> <strong>Maintain Network Security</strong> </li> <li>Configure and manage firewalls and intrusion prevention systems. </li> <li>Implement security policies and access controls. </li> <li>Monitor for cyber threats and respond to security incidents. </li> <li>Apply security patches and firmware updates. </li> <li> <strong>Manage User Accounts and Access</strong> </li> <li>Create, modify, and remove user accounts. </li> <li>Assign appropriate network permissions. </li> <li>Support authentication services such as Active Directory. </li> <li> <strong>Perform Network Maintenance</strong> </li> <li>Upgrade network hardware and software. </li> <li>Replace faulty equipment. </li> <li>Conduct preventive maintenance to minimize downtime. </li> <li> <strong>Backup and Disaster Recovery</strong> </li> <li>Maintain backup systems for network configurations and critical data. </li> <li>Develop and test disaster recovery procedures. </li> <li>Restore network services after failures or disasters. </li> <li> <strong>Document Network Infrastructure</strong> </li> <li>Maintain network diagrams and configuration records. </li> <li>Document IP addressing schemes, device inventories, and procedures. </li> <li>Keep maintenance and incident logs up to date. </li> <li> <strong>Support Servers and Network Services</strong> </li> <li>Manage services such as DNS, DHCP, VPN, email, and file sharing. </li> <li>Ensure servers and network applications operate efficiently. </li> <li> <strong>Plan Network Expansion</strong> </li> <li>Evaluate future networking requirements. </li> <li>Recommend hardware and software upgrades. </li> <li>Assist in designing scalable network infrastructure. </li> <li> <strong>Ensure Compliance</strong> </li> <li>Follow organizational IT policies and industry standards. </li> <li>Help ensure compliance with security and data protection regulations. </li> <li> <strong>Coordinate with Vendors</strong> </li> <li>Work with internet service providers and equipment vendors. </li> <li>Arrange repairs, replacements, and technical support. </li> <li>Evaluate new networking technologies and solutions.</li> <li> </li> </ul> <br> <p> <strong>Preferred candidate profile</strong> </p> <br> <p> <strong> <u>Qualification : </u> </strong> <br> B. E., (or) B. Sc., Computer Science (4/3 Years Full Time Course).<br> CCNA Certification is Must.<br> <strong> <u>Experience :</u> </strong> <br> Minimum 6 Years Experience in Network Administrator role. Good communication skills / computer skills (MS Office).<br> Hands on experience in networking, routing and switching, Knowledge of best practices around management, control &amp; monitoring of server infrastructure.<br> Experience with firewalls, Internet VPNs remote implementation, troubleshooting, and problem resolution is Mandatory.<br> Ability to set up and configure server hardware. Familiarity with backup and recovery software and methodologies</p></div></section>

<p>Job Overview Weatherford is seeking a skilled and results-driven Field Specialist III MPD to join our team. This pivotal role is responsible for optimizing MPD and drilling processes, enhancing efficiency, and driving profitability. The ideal candidate will work closely with country and regional team to ensure accurate reporting and compliance. Additionally, this role plays a key part in conducting Operations safely and with minimal interruption to drilling. The job requires occasional package preparation in the Weatherford base where full compliance to Weatherford performance standards is required.</p><p>Responsibilities:</p><p>Conducts maintenance of the Managed Pressure Drilling Services equipment at the job site and workshop when required.</p><p>Responsible for daily MPD reporting, hydraulic calculations, simulations and supervises shift personnel.</p><p>At the discretion of product line management (such as the Engineering Manager, Operations Manager, or their designee) will be responsible for working in the shop. This will include but not limited to green tagging, preparing, and/or assisting with shipping equipment to job site.</p><p>Rig up, operate and perform troubleshooting of the Managed Pressure Drilling Services equipment at the job site or workshop, ensure all paperwork and HSE requirements are met and complied with</p><p>Perform green tagging, In Casing Test, or other operational activities required on location or in the shop and all documented procedures for the Managed Pressure Drilling Services equipment on location.</p><p>Perform all RCD operations and monitoring.</p><p>Performs field operations of Managed Pressure Drilling Services equipment including operating the MPD Choke from the Operator s Panel</p><p>Troubleshoot all electrical/electronic components and repair/maintain chokes and other mechanical equipment as necessary.</p><p>Completes all the necessary reports/paperwork related to Managed Pressure Drilling Services operations.</p><p>Keeps updated on all inspection requirements for the Managed Pressure Drilling Services equipment on the job site and in the shop.</p><p>Demonstrate and apply knowledge and understanding of all matters related to the Managed Pressure Drilling Services equipment and accessories.</p><p>Provides onsite job support to include but not limited to: mechanical, hydraulic functionality, revision changes, compatibility issues, troubleshooting, system versions, of Managed Pressure Drilling Services components.</p><p>Keep updated on Managed Pressure Drilling Services equipment, mechanical and hydraulic equipment manufacturing or regulatory standards.</p><p>Know and understand Weatherford Quality Policy and comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Workplace Instructions</p><p>Comply with Weatherford and client Quality, Health, Security and Environment (QHSE) procedures and documentation on site for specific shift.</p><p>Document all jobs and incidents in the Weatherford Performance Tracking System (WPTS).</p><p>Participate in the Permit to Work process.</p><p>Actively participate in ToolBox talks.</p><p>Must understand and comply with all safety rules and company policies of Weatherford</p><p>Required to complete the competency and training requirements identified by Global and Regional Management.</p><p>Complete training in order to meet the minimum HSE certification and technical requirements required perform their jobs</p><p>Perform all duties regarding Managed Pressure Drilling Services and Weatherford assigned by management or supervisors within the physical demand of the job description.</p><p>Skills</p><p>Mechanical ability necessary to perform repairs</p><p>Excellent Microsoft Outlook, Word and Excel computer skills</p><p>Self-motivator, self-starter</p><p>Good oral and written communication skills</p><p>Must be able to follow instructions</p><p>Able to work closely with fellow employees</p><p>Customer focused.</p><p>General understanding of products and their application.</p><p>Individual must be adaptive to change, have multi-tasking ability.</p><p>Ability to work in a team environment.</p><p>Ability to work in high and cold temperature environment</p><p>Should be able to work closely with all levels of personnel and outside contractors.</p><p><strong>Desired Candidate Profile</strong></p><p>Qualifications: 3 - 5 years related to MPD field experience Bachelor's degree Strong MPD knowledge #LI-MD1</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>ZAIN2396 - System Controls</p><p>• Operation Zain Kuwait • Division Finance • Location Kuwait - Kuwait City • Closing Date 13-Aug-2026</p><p>About Zain Zain is the pioneer of mobile telecommunications in the Middle East. We began life in 1983 in Kuwait as the region s first mobile operator, and since the initiation of our expansion strategy in 2003, we have expanded rapidly. Read more here: https://zain.com/en/about-us/overview</p><p>About the Role The Systems Controls Data is responsible for detecting, minimizing and preventing all types of Technical Fraud, ensure correct system functionality and ensure technical restrictions are in place to secure the business.</p><p>Responsibilities:</p><ul><li>Understand the Zain Network Architecture and the technical details behind the services provided by Zain (eg. Calls, SMS,)</li><li>Understand technical systems by analyzing /investigating multiple systems (CDR, SDR etc.) to identify unmatched records and inconsistencies concerning revenue customer gaps and abuse</li><li>Ensure that all activities are systematically being recorded correctly (roaming calls, minutes used etc.)</li><li>Performs network trend analysis to provide early warning signs of potential abuse / misuse by fraudsters</li><li>Perform checks on profile integrity and reconcile data to ensure risk classification, dunning classification, correct cohort classification (categorization, segmentation etc.)</li><li>Participate in technical fraud control activities involving systematic controls</li><li>Monitoring of changes occurring network elements/mediations/billing to ensure no Fraud results due to improper implementation</li><li>Maintain Fraud Management system s smooth operation and ensure proper implementation of business rules and escalate bugs and system related issues</li><li>Carry out risk assessments for new technical systems to ensure no fraud loss result due to implementation</li><li>Assist in maintaining, designing and implementing existing and new fraud detection tools to ensure that no fraud cases occur</li><li>Assist in automating tasks and reports by building and maintaining data warehouses for different sources of information</li><li>Handling all technical communications including and not limited to: communication with vendors, communication with internal IT department or other departments for implementation or detailed technical evaluation</li><li>Develop customer credit limit policies, i.e. business rules for credit risk categorization &amp; credit limits assignment.</li><li>Continuous enhancement of Customer Risk Model to ensure correct and accurate classification of customers</li><li>Be aware of, and adhere to, all environmental requirements as set by the statutory bodies in Kuwait, or by the published policies of Zain Group/Kuwait to liaise with our partners.</li><li>Zain abides by fulfilling the occupational health and safety certificate requirements that establishes and maintains an OH&amp;S management system that eliminates hazards and minimizes OH&amp;S risks (including system deficiencies), takes advantage of OH&amp;S opportunities and addresses OH&amp;S management system nonconformities associated with its activities</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Ability to communicate, present and influence all levels of the organization</li><li>Expertise in technical fraud operations</li><li>Understanding of technical telecom systems</li><li>Understanding of modelling, financial accounting and reporting</li><li>Ability to run deep dive analyses</li><li>Experience with analytics, dashboards and problem structuring</li><li>Strong SQL skills</li><li>Advanced MS Office skills (Excel, Word, PowerPoint, etc.)</li><li>Clear ability to understand the dynamics of financial data to extract relevant information</li><li>Experience working independently across a cross-functional team</li><li>Experience answering big picture questions by framing the business question into an analytical plan and communicate to stakeholders</li><li>Strong problem-solving skills and ability to identify and frame key issues</li><li>Excellent written and verbal communication skills</li><li>Ability to analyze a situation and produce creative, original and useful solutions</li><li>Experience designing KPIs, reports, dashboards</li><li>Strong understanding of telecommunications products, trends and technology markets</li><li>Bachelor s Degree required; In Computer Science, Computer Engineering, Management Information Systems, or a related field that bridges business and technical disciplines.</li><li>2-4 Years Of Experience</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br>Supports an Aircraft Ground Equipment (AGE) shop in a medium to large-sized military aircraft flying organization. Ensures the timely and proper performance of scheduled and unscheduled maintenance on AGE equipment and light support vehicles. Inspects, tests, and operates AGE to determine equipment serviceability and proper operation. Diagnoses mechanical and electrical circuitry malfunctions. Interprets drawings, wiring diagrams, schematics, and technical data to facilitate repairs and/or modifications to ground support equipment.<br>Identifies appropriate replacement parts in TOs and technical documents and orders those parts. Removes, disassembles, repairs, cleans, treats for corrosion, assembles, and re-installs AGE accessories and components. Stencils and marks AGE as appropriate. Services equipment with fuel, oil, coolant, water, hydraulic fluid, and air as required. Operates, cleans, inspects, and services AGE tow vehicles. Maintains and documents AGE equipment and tow vehicle forms. Positions equipment to support aircraft maintenance and flying operations. Schedules PMIs as required. Adheres to safety procedures and follows technical orders as applicable.<br>USAF equivalent position is AGE Mechanic Apprentice.<br><b>Essential Responsibilities:</b><br>• Maintains external fuel and grounding systems; performs scheduled and unscheduled maintenance on GSE; inspects, tests, and operates GSE to determine equipment serviceability and proper operation; services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air; diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical publications.<br>• Disassembles and assembles malfunctioning basic GSE accessories and components; removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories; stencils and marks GSE in accordance with technical publications; stores, handles, labels, uses, and disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations.<br>• Prepares GSE for storage and mobility deployment; and operates, cleans, inspects, and services GSE towing vehicles.<br>• Assists in maintaining vehicle records and assists with updating paper and electronic equipment records; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations; practices good housekeeping, tool control, Foreign Object Damage prevention, and safety at all times.<br>• Performs all other duties as assigned or requested.<br>Minimum Requirements<br>• Must have High School Diploma or have completed relevant military and/or vocational technical school curriculum.<br>• Minimum of one-year actual AGE maintenance experience required.<br>• Must be qualified with most basic types and uses of AGE equipment.<br>• Must be familiar with diesel engine maintenance and repair, and HVAC maintenance and repair at the basic level.<br>• Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.<br>• Must be able to inspect, repair, and operate ground support and auxiliary equipment.<br>• Must achieve a passing grade in all required courses/certifications for continued employment, as needed.<br>• Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.<br>• Must be able to Deploy to Forward Locations (other countries) as Directed by the Government<br>• Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.<br>• Must be able to speak, read, write, and understand English.<br>• Must submit updated SF-86 within 30 days of hire start date.<br>• Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.<br>• Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.<br>• Must have current/active State Issued Driver s License.<br>• Must be able to acquire and maintain a valid flight-line Government Driver s License.<br>• Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.<br>• Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.<br><b>Preferred Qualifications</b><br>• Associate degree in a relevant career field.<br>• RPA Deployment experience.<br>• Prior experience as a Defense Contractor.<br>• Vehicle Operator Training.<br>• AGE Mechanic experience within the last 10 years.<br></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Supports an Aircraft Ground Equipment (AGE) shop in a medium to large-sized military aircraft flying organization. Ensures the timely and proper performance of scheduled and unscheduled maintenance on AGE equipment and light support vehicles. Inspects, tests, and operates AGE to determine equipment serviceability and proper operation. Diagnoses mechanical and electrical circuitry malfunctions. Interprets drawings, wiring diagrams, schematics, and technical data to facilitate repairs and/or modifications to ground support equipment. Identifies appropriate replacement parts in TOs and technical documents and orders those parts. Removes, disassembles, repairs, cleans, treats for corrosion, assembles, and re-installs AGE accessories and components. Stencils and marks AGE as appropriate. Services equipment with fuel, oil, coolant, water, hydraulic fluid, and air as required. Operates, cleans, inspects, and services AGE tow vehicles. Maintains and documents AGE equipment and tow vehicle forms. Positions equipment to support aircraft maintenance and flying operations. Schedules PMIs as required. Adheres to safety procedures and follows technical orders as applicable. USAF equivalent position is AGE Mechanic Apprentice. Essential Responsibilities: Maintains external fuel and grounding systems; performs scheduled and unscheduled maintenance on GSE; inspects, tests, and operates GSE to determine equipment serviceability and proper operation; services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air; diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical publications. Disassembles and assembles malfunctioning basic GSE accessories and components; removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories; stencils and marks GSE in accordance with technical publications; stores, handles, labels, uses, and disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations. Prepares GSE for storage and mobility deployment; and operates, cleans, inspects, and services GSE towing vehicles. Assists in maintaining vehicle records and assists with updating paper and electronic equipment records; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations; practices good housekeeping, tool control, Foreign Object Damage prevention, and safety at all times. Performs all other duties as assigned or requested.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must have High School Diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one-year actual AGE maintenance experience required.</li><li>Must be qualified with most basic types and uses of AGE equipment.</li><li>Must be familiar with diesel engine maintenance and repair, and HVAC maintenance and repair at the basic level.</li><li>Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li><li>Must be able to inspect, repair, and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications</p><ul><li>Associate degree in a relevant career field.</li><li>RPA Deployment experience.</li><li>Prior experience as a Defense Contractor.</li><li>Vehicle Operator Training.</li><li>AGE Mechanic experience within the last 10 years.</li></ul><p></p></section>

<p><strong>Job Overview</strong> Weatherford is seeking a skilled and results-driven Field Specialist IV MPD to join our team. This pivotal role is responsible for optimizing MPD and drilling processes, enhancing efficiency, and driving profitability. The ideal candidate will work closely with country and regional team to ensure accurate reporting and compliance. Additionally, this role plays a key part in conducting Operations safely and with minimal interruption to drilling. The job requires occasional package preparation in the Weatherford base where full compliance to Weatherford performance standards is required.</p><p><strong>Responsibilities:</strong> Conducts maintenance of the Managed Pressure Drilling Services equipment at the job site and workshop when required. Responsible for managing all aspects of the field/offshore Directly responsible for the safe delivery of all MPD related services onsite. On call 24hrs while on site. Responsible for daily MPD reporting, hydraulic calculations, simulations and supervises shift personnel. At the discretion of product line management (such as the Engineering Manager, Operations Manager, or their designee) will be responsible for working in the shop. This will include but not limited to green tagging, preparing, and/or assisting with shipping equipment to job site. Rig up, operate and perform troubleshooting of the Managed Pressure Drilling Services equipment at the job site or workshop, ensure all paperwork and HSE requirements are met and complied with Perform green tagging, In Casing Test, or other operational activities required on location or in the shop and all documented procedures for the Managed Pressure Drilling Services equipment on location. Perform all RCD operations and monitoring. Performs field operations of Managed Pressure Drilling Services equipment including operating the MPD Choke from the Operator s Panel Troubleshoot all electrical/electronic components and repair/maintain chokes and other mechanical equipment as necessary. Completes all the necessary reports/paperwork related to Managed Pressure Drilling Services operations. Keeps updated on all inspection requirements for the Managed Pressure Drilling Services equipment on the job site and in the shop. Demonstrate and apply knowledge and understanding of all matters related to the Managed Pressure Drilling Services equipment and accessories. Provides onsite job support to include but not limited to: mechanical, hydraulic functionality, revision changes, compatibility issues, troubleshooting, system versions, of Managed Pressure Drilling Services components. Keep updated on Managed Pressure Drilling Services equipment, mechanical and hydraulic equipment manufacturing or regulatory standards. Know and understand Weatherford Quality Policy and comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Workplace Instructions Comply with Weatherford and client Quality, Health, Security and Environment (QHSE) procedures and documentation on site for specific shift. Document all jobs and incidents in the Weatherford Performance Tracking System (WPTS). Participate in the Permit to Work process. Actively participate in ToolBox talks. Must understand and comply with all safety rules and company policies of Weatherford Required to complete the competency and training requirements identified by Global and Regional Management. Complete training in order to meet the minimum HSE certification and technical requirements required perform their jobs Perform all duties regarding Managed Pressure Drilling Services and Weatherford assigned by management or supervisors within the physical demand of the job description.</p><p><strong>Skills</strong> Mechanical ability necessary to perform repairs Excellent Microsoft Outlook, Word and Excel computer skills Self-motivator, self-starter Good oral and written communication skills Must be able to follow instructions Able to work closely with fellow employees Customer focused. General understanding of products and their application. Individual must be adaptive to change, have multi-tasking ability. Ability to work in a team environment. Ability to work in high and cold temperature environment Should be able to work closely with all levels of personnel and outside contractors.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Qualifications:</strong> +5 years related to MPD field experience Bachelor's degree Strong MPD knowledge #LI-MD1</p>

<p><h4>Job summary</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance.</p> <p>Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements.</p> <p>USAF equivalent position is Munitions/Weapons Technician Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li> <li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li> <li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li> <li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li> <li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li> <li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li> <li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li> <li>Maintain weapons certification and currency.</li> <li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li> <li>Perform all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft munitions/weapons maintenance experience required.</li> <li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li> <li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Munitions/weapons experience within the last 10 years.</li> </ul></p><p></p>

<p><h4>Job summary</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance.</p> <p>Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements.</p> <p>USAF equivalent position is Munitions/Weapons Technician Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li> <li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li> <li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li> <li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li> <li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li> <li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li> <li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li> <li>Maintain weapons certification and currency.</li> <li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li> <li>Perform all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft munitions/weapons maintenance experience required.</li> <li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li> <li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Munitions/weapons experience within the last 10 years.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> <b>Job Summary</b> </p> <p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. </p> <p> </p> <p>Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance. </p> <p> </p> <p>Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements. </p> <p> </p> <p>USAF equivalent position is Munitions/Weapons Technician Apprentice.<b> </b> </p> <p> </p> <p> <b>Essential Responsibilities: </b> </p> <p> </p> <p> Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. </p> <p> Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components. </p> <p> Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures. </p> <p> Inspect bomb release systems and missile launchers to determine need for repair or destruction. </p> <p> Assist in management of all inspection, maintenance, and storage of munitions and support equipment. </p> <p> Support quality assurance, compliance, continuity, and standardization of munitions programs. </p> <p> Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems. </p> <p> Maintain weapons certification and currency. </p> <p> Assist with availability and serviceability of munitions to support and meet customer requirements. </p> <p> Perform all other duties as assigned or requested.</p> <p> </p> <p> <b>Minimum Requirements:</b> </p> <p> </p> <p> Must have High School diploma or have completed relevant military and/or vocational technical school curriculum. </p> <p> Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required. </p> <p> Completed USAF Munitions/Weapons Tech School or DoD equivalent. </p> <p> Must possess basic knowledge of technical publications related to aircraft maintenance. </p> <ul> <li>Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo</li> </ul> <p> Must be able to inspect and operate ground support and auxiliary equipment. </p> <p> Must achieve a passing grade in all required courses/certifications for continued employment, as needed. </p> <p> Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment. </p> <ul> <li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li> </ul> <p> Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods. </p> <p> Must be able to speak, read, write, and understand English. </p> <p> Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance. </p> <p> Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</p> <p> Must submit updated SF-86 within 30 days of hire start date. </p> <p> Must have current/active State Issued Driver s License. </p> <p> Must be able to acquire and maintain a valid flight-line Government Driver s License. </p> <p> Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages. </p> <p> Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</p> <p> </p> <p> <b> Preferred Qualifications:</b> </p> <p> <b> </b> </p> <p> Associate degree in a relevant career field. </p> <p> RPA Deployment Experience. </p> <p> Prior Experience as a Defense Contractor. </p> <p> Munitions/Weapons experience within the last 10 years<b>. </b> </p> <p> </p></div></section>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Supports an aircraft ground equipment (AGE) shop in a medium to large-sized military aircraft flying organization. Ensures the timely and proper performance of scheduled and unscheduled maintenance on AGE equipment and light support vehicles. Inspects, tests, and operates AGE to determine equipment serviceability and proper operation. Diagnoses mechanical and electrical circuitry malfunctions. Interprets drawings, wiring diagrams, schematics, and technical data to facilitate repairs and/or modifications to ground support equipment.</p> <p>Identifies appropriate replacement parts in TOs and technical documents and orders those parts. Removes, disassembles, repairs, cleans, treats for corrosion, assembles, and re-installs AGE accessories and components. Stencils and marks AGE as appropriate. Services equipment with fuel, oil, coolant, water, hydraulic fluid, and air as required. Operates, cleans, inspects, and services AGE tow vehicles. Maintains and documents AGE equipment and tow vehicle forms. Positions equipment to support aircraft maintenance and flying operations. Schedules PMIs as required. Adheres to safety procedures and follows technical orders as applicable.</p> <p>USAF equivalent position is AGE Mechanic Apprentice.</p> <h4>Essential responsibilities</h4> <ul> <li>Maintains external fuel and grounding systems; performs scheduled and unscheduled maintenance on GSE; inspects, tests, and operates GSE to determine equipment serviceability and proper operation; services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air; diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical publications.</li> <li>Disassembles and assembles malfunctioning basic GSE accessories and components; removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories; stencils and marks GSE in accordance with technical publications; stores, handles, labels, uses, and disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations.</li> <li>Prepares GSE for storage and mobility deployment; and operates, cleans, inspects, and services GSE towing vehicles.</li> <li>Assists in maintaining vehicle records and assists with updating paper and electronic equipment records; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations; practices good housekeeping, tool control, foreign object damage prevention, and safety at all times.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one-year actual AGE maintenance experience required.</li> <li>Must be qualified with most basic types and uses of AGE equipment.</li> <li>Must be familiar with diesel engine maintenance and repair, and HVAC maintenance and repair at the basic level.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect, repair, and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Vehicle operator training.</li> <li>AGE mechanic experience within the last 10 years.</li> </ul></p><p></p>

<p><h4>Program summary</h4> <p>KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services facilitate essential aircraft arrivals and departures services for United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers Engineering Support, NTV Leasing, LAMS, Power Production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</p> <h4>Job summary</h4> <p>The Transient Aircraft Services (TAS) Technician is responsible for the execution of aircraft ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs aircraft arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</p> <p>This position ensures all aircraft servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for maintaining operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</p> <h4>Roles and responsibilities</h4> <ul> <li>Maintain a zero harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE at all times.</li> <li>Perform aircraft marshaling, parking, and positioning in accordance with applicable Technical Orders and airfield procedures.</li> <li>Execute aircraft arrival and departure services, including chocking, grounding, and ensuring safe positioning on the flight line.</li> <li>Conduct aircraft servicing operations, including general ground handling tasks required to support aircraft turn-around and mission readiness.</li> <li>Assist in aircraft launch and recovery operations in coordination with Supervisors and Airfield Management.</li> <li>Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</li> <li>Maintain strict accountability of tools and equipment; ensure compliance with tool control programs at all times.</li> <li>Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</li> <li>Follow all applicable Technical Orders, safety directives, and standard operating procedures during all aircraft servicing operations.</li> <li>Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</li> <li>Identify and report safety hazards, equipment malfunctions, and operational issues to leadership immediately.</li> <li>Support documentation requirements, including aircraft servicing records, shift logs, and inspection checklists.</li> <li>Assist in maintaining cleanliness and organization of the flight line and work areas.</li> <li>Support training and qualification requirements to maintain mission readiness and compliance with certification standards.</li> <li>Perform duties in austere conditions, including extreme weather, while maintaining safety and operational discipline.</li> <li>Perform additional duties and tasks as assigned by the Supervisor or Site Manager.</li> </ul> <h4>Basic qualifications</h4> <ul> <li>Must be a U.S. citizen</li> <li>Ability to obtain and maintain a secret clearance</li> <li>Ability to maintain operational continuity across rotations and work within government-led governance rhythms</li> <li>Minimum 3–5 years of experience in aviation operations, aircraft maintenance, or Transient Aircraft Services</li> <li>Hands-on experience working on a flight line or in aircraft ground operations</li> <li>Basic knowledge of: <ul> <li>Aircraft marshaling and ground handling procedures</li> <li>Flight line safety requirements</li> <li>Use of ground support equipment</li> </ul> </li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Prior experience supporting U.S. Air Force TAS operations</li> <li>FAA Airframe & Powerplant (A&P) certification or equivalent military experience</li> <li>Familiarity with FOD programs, tool control, and flight line safety compliance</li> <li>Experience coordinating with MOC, Airfield Management, and aircraft maintenance teams</li> </ul> <h4>KBR benefits</h4> <p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development.</p></p><p></p>

<p><h4>Program summary</h4> <p>KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services facilitate essential aircraft arrivals and departures services for United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers Engineering Support, NTV Leasing, LAMS, Power Production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</p> <h4>Job summary</h4> <p>The Transient Aircraft Services (TAS) Technician is responsible for the execution of aircraft ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs aircraft arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</p> <p>This position ensures all aircraft servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for maintaining operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</p> <h4>Roles and responsibilities</h4> <ul> <li>Maintain a ZERO Harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE at all times.</li> <li>Perform aircraft marshaling, parking, and positioning in accordance with applicable Technical Orders and airfield procedures.</li> <li>Execute aircraft arrival and departure services, including chocking, grounding, and ensuring safe positioning on the flight line.</li> <li>Conduct aircraft servicing operations, including general ground handling tasks required to support aircraft turn-around and mission readiness.</li> <li>Assist in aircraft launch and recovery operations in coordination with Supervisors and Airfield Management.</li> <li>Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</li> <li>Maintain strict accountability of tools and equipment; ensure compliance with tool control programs at all times.</li> <li>Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</li> <li>Follow all applicable Technical Orders, safety directives, and standard operating procedures during all aircraft servicing operations.</li> <li>Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</li> <li>Identify and report safety hazards, equipment malfunctions, and operational issues to leadership immediately.</li> <li>Support documentation requirements, including aircraft servicing records, shift logs, and inspection checklists.</li> <li>Assist in maintaining cleanliness and organization of the flight line and work areas.</li> <li>Support training and qualification requirements to maintain mission readiness and compliance with certification standards.</li> <li>Perform duties in austere conditions, including extreme weather, while maintaining safety and operational discipline.</li> <li>Perform additional duties and tasks as assigned by the Supervisor or Site Manager.</li> </ul> <h4>Basic qualifications</h4> <ul> <li>Must be a U.S. citizen</li> <li>Ability to obtain and maintain a SECRET clearance</li> <li>Ability to maintain operational continuity across rotations and work within Government-led governance rhythms</li> <li>Minimum 3–5 years of experience in aviation operations, aircraft maintenance, or Transient Aircraft Services</li> <li>Hands-on experience working on a flight line or in aircraft ground operations</li> <li>Basic knowledge of: <ul> <li>Aircraft marshaling and ground handling procedures</li> <li>Flight line safety requirements</li> <li>Use of ground support equipment</li> </ul> </li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Prior experience supporting U.S. Air Force TAS operations</li> <li>FAA Airframe & Powerplant (A&P) certification or equivalent military experience</li> <li>Familiarity with FOD programs, tool control, and flight line safety compliance</li> <li>Experience coordinating with MOC, Airfield Management, and aircraft maintenance teams</li> </ul> <h4>KBR benefits</h4> <p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development.</p></p><p></p>

<p><h4>Program summary</h4> <p>KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services facilitate essential aircraft arrivals and departures services for United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers engineering support, NTV leasing, LAMS, power production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</p> <h4>Job summary</h4> <p>The Transient Aircraft Services (TAS) Technician is responsible for the execution of aircraft ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs aircraft arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</p> <p>This position ensures all aircraft servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for maintaining operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</p> <h4>Roles and responsibilities</h4> <ul> <li>Maintain a ZERO Harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE at all times.</li> <li>Perform aircraft marshaling, parking, and positioning in accordance with applicable Technical Orders and airfield procedures.</li> <li>Execute aircraft arrival and departure services, including chocking, grounding, and ensuring safe positioning on the flight line.</li> <li>Conduct aircraft servicing operations, including general ground handling tasks required to support aircraft turn-around and mission readiness.</li> <li>Assist in aircraft launch and recovery operations in coordination with Supervisors and Airfield Management.</li> <li>Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</li> <li>Maintain strict accountability of tools and equipment; ensure compliance with tool control programs at all times.</li> <li>Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</li> <li>Follow all applicable Technical Orders, safety directives, and standard operating procedures during all aircraft servicing operations.</li> <li>Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</li> <li>Identify and report safety hazards, equipment malfunctions, and operational issues to leadership immediately.</li> <li>Support documentation requirements, including aircraft servicing records, shift logs, and inspection checklists.</li> <li>Assist in maintaining cleanliness and organization of the flight line and work areas.</li> <li>Support training and qualification requirements to maintain mission readiness and compliance with certification standards.</li> <li>Perform duties in austere conditions, including extreme weather, while maintaining safety and operational discipline.</li> <li>Perform additional duties and tasks as assigned by the Supervisor or Site Manager.</li> </ul> <h4>Basic qualifications</h4> <ul> <li>Must be a U.S. citizen</li> <li>Ability to obtain and maintain a SECRET clearance</li> <li>Ability to maintain operational continuity across rotations and work within Government-led governance rhythms</li> <li>Minimum 3–5 years of experience in aviation operations, aircraft maintenance, or Transient Aircraft Services</li> <li>Hands-on experience working on a flight line or in aircraft ground operations</li> <li>Basic knowledge of: <ul> <li>Aircraft marshaling and ground handling procedures</li> <li>Flight line safety requirements</li> <li>Use of ground support equipment</li> </ul> </li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Prior experience supporting U.S. Air Force TAS operations</li> <li>FAA Airframe & Powerplant (A&P) certification or equivalent military experience</li> <li>Familiarity with FOD programs, tool control, and flight line safety compliance</li> <li>Experience coordinating with MOC, Airfield Management, and aircraft maintenance teams</li> </ul> <h4>KBR benefits</h4> <p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance, AD</p><p></p>

<p><h4>Program summary</h4> <p>KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services facilitate essential aircraft arrivals and departures services for United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers engineering support, NTV leasing, LAMS, power production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</p> <h4>Job summary</h4> <p>The Transient Aircraft Services (TAS) Technician is responsible for the execution of aircraft ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs aircraft arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</p> <p>This position ensures all aircraft servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for maintaining operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</p> <h4>Roles and responsibilities</h4> <ul> <li>Maintain a ZERO Harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE at all times.</li> <li>Perform aircraft marshaling, parking, and positioning in accordance with applicable Technical Orders and airfield procedures.</li> <li>Execute aircraft arrival and departure services, including chocking, grounding, and ensuring safe positioning on the flight line.</li> <li>Conduct aircraft servicing operations, including general ground handling tasks required to support aircraft turn-around and mission readiness.</li> <li>Assist in aircraft launch and recovery operations in coordination with Supervisors and Airfield Management.</li> <li>Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</li> <li>Maintain strict accountability of tools and equipment; ensure compliance with tool control programs at all times.</li> <li>Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</li> <li>Follow all applicable Technical Orders, safety directives, and standard operating procedures during all aircraft servicing operations.</li> <li>Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</li> <li>Identify and report safety hazards, equipment malfunctions, and operational issues to leadership immediately.</li> <li>Support documentation requirements, including aircraft servicing records, shift logs, and inspection checklists.</li> <li>Assist in maintaining cleanliness and organization of the flight line and work areas.</li> <li>Support training and qualification requirements to maintain mission readiness and compliance with certification standards.</li> <li>Perform duties in austere conditions, including extreme weather, while maintaining safety and operational discipline.</li> <li>Perform additional duties and tasks as assigned by the Supervisor or Site Manager.</li> </ul> <h4>Basic qualifications</h4> <ul> <li>Must be a U.S. citizen</li> <li>Ability to obtain and maintain a SECRET clearance</li> <li>Ability to maintain operational continuity across rotations and work within Government-led governance rhythms</li> <li>Minimum 3–5 years of experience in aviation operations, aircraft maintenance, or Transient Aircraft Services</li> <li>Hands-on experience working on a flight line or in aircraft ground operations</li> <li>Basic knowledge of: <ul> <li>Aircraft marshaling and ground handling procedures</li> <li>Flight line safety requirements</li> <li>Use of ground support equipment</li> </ul> </li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Prior experience supporting U.S. Air Force TAS operations</li> <li>FAA Airframe & Powerplant (A&P) certification or equivalent military experience</li> <li>Familiarity with FOD programs, tool control, and flight line safety compliance</li> <li>Experience coordinating with MOC, Airfield Management, and aircraft maintenance teams</li> </ul> <h4>KBR benefits</h4> <p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life</p><p></p>

<p><h4>Program summary</h4> <p>KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services facilitate essential aircraft arrivals and departures services for United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers Engineering Support, NTV Leasing, LAMS, Power Production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</p> <h4>Job summary</h4> <p>The Transient Aircraft Services (TAS) Technician is responsible for the execution of aircraft ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs aircraft arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</p> <p>This position ensures all aircraft servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for maintaining operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</p> <h4>Roles and responsibilities</h4> <ul> <li>Maintain a ZERO Harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE at all times.</li> <li>Perform aircraft marshaling, parking, and positioning in accordance with applicable Technical Orders and airfield procedures.</li> <li>Execute aircraft arrival and departure services, including chocking, grounding, and ensuring safe positioning on the flight line.</li> <li>Conduct aircraft servicing operations, including general ground handling tasks required to support aircraft turn-around and mission readiness.</li> <li>Assist in aircraft launch and recovery operations in coordination with Supervisors and Airfield Management.</li> <li>Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</li> <li>Maintain strict accountability of tools and equipment; ensure compliance with tool control programs at all times.</li> <li>Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</li> <li>Follow all applicable Technical Orders, safety directives, and standard operating procedures during all aircraft servicing operations.</li> <li>Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</li> <li>Identify and report safety hazards, equipment malfunctions, and operational issues to leadership immediately.</li> <li>Support documentation requirements, including aircraft servicing records, shift logs, and inspection checklists.</li> <li>Assist in maintaining cleanliness and organization of the flight line and work areas.</li> <li>Support training and qualification requirements to maintain mission readiness and compliance with certification standards.</li> <li>Perform duties in austere conditions, including extreme weather, while maintaining safety and operational discipline.</li> <li>Perform additional duties and tasks as assigned by the Supervisor or Site Manager.</li> </ul> <h4>Basic qualifications</h4> <ul> <li>Must be a U.S. citizen</li> <li>Ability to obtain and maintain a SECRET clearance</li> <li>Ability to maintain operational continuity across rotations and work within Government-led governance rhythms</li> <li>Minimum 3–5 years of experience in aviation operations, aircraft maintenance, or Transient Aircraft Services</li> <li>Hands-on experience working on a flight line or in aircraft ground operations</li> <li>Basic knowledge of: <ul> <li>Aircraft marshaling and ground handling procedures</li> <li>Flight line safety requirements</li> <li>Use of ground support equipment</li> </ul> </li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Prior experience supporting U.S. Air Force TAS operations</li> <li>FAA Airframe & Powerplant (A&P) certification or equivalent military experience</li> <li>Familiarity with FOD programs, tool control, and flight line safety compliance</li> <li>Experience coordinating with MOC, Airfield Management, and aircraft maintenance teams</li> </ul> <h4>KBR benefits</h4> <p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance, AD</p><p></p>