Architectural supervisor Jobs in Kuwait

As the OCN/LN Monitor (Escort) you will escort un-cleared personnel into areas and monitor un-cleared personnel while performing work. You will log in and out all LN/OCN contractors and count personnel before and after they perform duties; notify appropriate personnel of how many people and vehicles are being escorted.<br><br>Essential Job Functions<br><br>Performs a wide range of Local National/Other Country National (LN/OCN) escorting coverage. Makes contact with LN/OCN personnel at designated entry facility after they are processed for entry and receive their exchange badges; providing and briefing them on rules and procedures. Escorts LN/OCN personnel until daily work is completed, the work zone has been purged by trained Force Protection military personnel and all LNs/OCNs have exited base and/or returned to camps. Ensure LN/OCNs do not bring onto the base any prohibited or contraband items (i.e. weapons, drugs, etc.). Maintain sight of all vehicles and personnel when performing LN/OCN escort duties. Provide for safety and welfare of oneself and escorted personnel (such as evacuating to protective shelter in case of attack). Notify Project/Site Manager and the Safety staff as soon as possible of unsafe working conditions. Ensure proper housekeeping practices are strictly adhered to. Maintains an alert state of readiness and is prepared to properly respond to any situation that may occur; alerts appropriate personnel of any suspicious behaviors or comments of LN/OCNs. Performs other duties as assigned.<br><br>Minimum Qualifications<br><br>US Citizenship Valid US Passport (preferred) Valid US Driver's License with good driving report Must be able to meet all current USCENTCOM Deployment Policy Requirements, as outlined in the USCENTCOM APR 23 MOD EIGHTEEN TO USCENTCOM INDIVIDUAL AND INDIVIDUAL-UNIT DEPLOYMENT POLICYAble to obtain and maintain a valid Residency Visa at host nation. Must be able to work in extreme environmental conditions including dust and high temperatures. Must be able to endure long hours, exposure to weather and hazardous conditions.<br><br>TRAVEL: 100% deployed overseas<br><br>SECURITY CLEARANCE: NACI/Public Trust<br><br>Intrepid Acquisition Holdings, LLC<br><br>www.intrepidgs.com<br><br>Intrepid Acquisition Holdings, LLC. (IAH), is a leading provider of global-scale logistics, facilities management, and advanced professional and technical services. IAH provides a broad spectrum of services and solutions to U. S. and international government agencies, and organizations. As a world-class leader in providing seasoned program management, IAH leverages and integrates its capabilities to provide safe, innovative, and reliable solutions to meet customers' diverse and complex challenges.<br><br>Intrepid Acquisition Holdings, LLC. (“IAH” and/or “Company”) and its affiliates, including but not limited to IAP World Services, Inc., Readiness Management Support L. C., JPATS Logistics Services, LLC., and subsidiaries is an EOE, including disability/vets.<br><br>All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><br></p><p><b>Company Overview</b></p><p>British International for Education consists of The British School of Kuwait (BSK), The Sunshine Kindergarten (TSK), The British Academy of Sport (BAS) and The British Academy of International Arts (BAIA).</p><p>The British School of Kuwait (BSK) is recognised widely as Kuwait's premier school. In terms of the quality of educational provision; resourcing; the achievements of its students; the breadth of the curriculum; the extent of its extra-curricular provision; the commitment to continuing professional development and the embedding of technology into the teaching, learning and management of the school, BSK sets standards that very few other schools can match. Above all, it is renowned for the quality of its students and its teachers. All teachers at BSK are adventurous, capable and ambitious and whilst the average length of stay has been increasing, there remain frequent opportunities for colleagues to apply for positions of extra responsibility. Though BSK demands the highest standards of professionalism from its staff it remains an exciting environment in which to build a career in teaching.</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Job Summary</b></p><p>BIE hires a number of non-teaching roles in areas including Customer Service, Admissions &amp; Marketing, Operations, IT, HR, Procurement and Finance. Openings in specialist positions are posted on the job board. If you would like your profile to be considered and do not see a specialist job posting that matches your qualifications, please complete the employment application here.</p><p><b>Position Requirements</b></p><p>We are seeking a qualified and committed professionals to join our organisation.&nbsp;&nbsp;</p><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>this is a full-time, on-site Draftsman (Revit) role based in Kuwait. The Draftsman will create detailed architectural drawings and 3D models using Revit, ensuring compliance with project specifications, building codes, and office standards. Day-to-day tasks include developing floor plans, elevations, sections, and details; coordinating with architects and designers; and updating drawings based on design changes and review feedback. The role also involves organizing project documentation, supporting design presentations with accurate visuals, and collaborating closely with the project team to meet deadlines and maintain high drafting quality.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Strong proficiency in Revit for architectural drafting, modeling, and documentation. Working knowledge of other design and drafting tools (e.g., AutoCAD, SketchUp, Rhino, or similar) and familiarity with BIM workflows Understanding of architectural design principles, building codes, construction methods, and technical detailingAbility to read, interpret, and produce accurate architectural drawings from sketches, concepts, and design briefsEffective communication and collaboration skills, with the ability to work closely with architects, designers, and other team members on-siteStrong attention to detail, organizational skills, and ability to manage multiple tasks and deadlines in a fast-paced environmentDiploma or degree in Architecture, Architectural Technology, or a related field; relevant professional experience in drafting is highly beneficialExperience working in an architectural or design firm, preferably with exposure to international projects or standards, is an advantage</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Skills and Behavioral Competencies</b></p><p><b>Communication:</b></p><ul><li><b></b>The ability to communicate effectively verbally and in writing with employees and customers at all levels.</li><li> Effective communication with others (co-workers, supervisors, and other departments) through providing and exchanging information.</li></ul><p><b>Professional Skills and Abilities:</b></p><ul><li> Attention to detail and the ability to analyze results.</li><li> Good understanding of quality control procedures and international, local, and regional standards applicable to the food industry.</li><li> Attention to product details and accuracy of observation to detect any errors or defects that deviate from the agreed standards within the company.</li><li> Ability to handle responsibilities with precision.</li><li> Ability to research, analyze, create data, and statistics.</li><li> Ability to write and explain information and prepare professional reports.</li><li> Commitment to professionalism and objectivity.</li><li> Possession of organizational skills to arrange tasks.</li><li> Ability to apply logical analytical skills.</li><li> Quality and excellence in achieving tasks with results and specified quality standards.</li><li> Optimal interaction with the company's work team and mastery of work while maintaining company property and confidentiality.</li><li> Good knowledge of the company's operations and has alertness and strong observation skills.</li></ul><p><br></p><p><b>Tasks and Responsibilities</b></p><ul><li> Implementing policies and procedures of the work department according to the requirements of each of the applicable quality systems in the company, governance, and best practices.</li><li> Directly supporting the implementation of policies related to Total Quality Management (TQM) systems in coordination with the direct supervisor.</li><li> Executing all stages of approved departmental work programs and quality initiatives.</li><li> Maintaining and updating the quality management information database for future reference and reporting.</li><li> Using approved electronic systems to manage and improve quality data and information.</li><li> Monitoring departmental Key Performance Indicators (KPIs), tracking achievement rates, and preparing performance reports for the direct supervisor.</li><li> Ensuring quality awareness guidelines, policies, and instructions are properly communicated and displayed in designated areas.</li><li> Monitoring the implementation of quality management policies and procedures in accordance with the latest applicable international standards and requirements.</li><li> Analyzing quality-related data, statistics, and performance indicators and submitting findings to the direct supervisor.</li><li> Identifying and documenting operational non-conformities through <b>Non-Conformance Reports (NCRs)</b>.</li><li> Monitoring the implementation of approved corrective and preventive actions related to identified non-conformities.</li><li> Conducting compliance checks to ensure adherence to the company's applicable quality management standards and procedures.</li><li> Supporting departments and production facilities during internal quality audits and following up on audit requirements to ensure compliance.</li><li> Monitoring the company's quality documentation and forms management system to ensure all departments are using the latest approved versions of procedures, policies, and quality forms.</li><li> Monitoring product quality and identifying any defects or deviations from established company standards.</li><li> Preparing and submitting quality-related reports to the direct supervisor, including:</li><li> Quality Control Reports</li><li> Non-Conformance Reports (NCRs)</li><li> Quality Objectives Reports</li><li> KPI Analysis Reports</li><li> Quality Performance Reports</li><li> Other reports related to quality management activities.</li><li> Supporting continuous improvement initiatives by identifying trends, potential risks, and opportunities for improving quality performance.</li><li> Performing any other duties within the scope of the position as assigned by the supervisor.</li></ul><p>Required Skills &amp; Competencies</p><ul><li> Good understanding of quality control procedures and international, local, and regional standards applicable to the food industry.</li><li> Strong attention to detail and ability to identify product defects or deviations from established quality standards.</li><li> Strong analytical and logical thinking skills.</li><li> Ability to collect, analyze, and interpret data and statistics.</li><li> Ability to prepare professional reports and clearly communicate technical information.</li><li> Strong organizational and time-management skills.</li><li> High level of accuracy, accountability, and attention to detail.</li><li> Professional, objective, and ethical approach.</li><li> Strong observation and problem-solving skills.</li><li> Good knowledge of company operations and quality requirements.</li><li> Ability to work effectively with different departments and teams.</li><li> Ability to maintain company confidentiality and protect company property.</li></ul><p>Language Requirements</p><ul><li> Ability to communicate effectively in <b>Arabic or English</b>, both verbally and in writing.</li></ul><p>Educational Qualifications &amp; Experience</p><p><b>Educational Qualifications:</b></p><ul><li>Bachelor's degree in <b>Science or Engineering</b>, or equivalent.</li><li>Diploma in <b>Science or Engineering</b>.</li><li> Preferably, professional certifications in the following areas:</li><li><b>Quality Management Systems – ISO 9001 Lead Auditor</b></li><li><b>Lean Six Sigma</b></li><li><b>Total Quality Management (TQM)</b></li><li><b>Environmental Management System (EMS)</b></li><li><b>Food Safety Management System – ISO 22000</b></li><li><b>FSSC 22000</b></li><li><b>ISO 45001</b></li><li><b>ISO 14001</b></li><li><b>HACCP</b></li><li><b>VACCP</b></li><li><b>TACCP</b></li><li><b>Halal</b></li><li><b>GMP</b></li></ul><p><b>Experience:</b></p><ul><li>Bachelor's degree: <b>Minimum 5 years of experience</b> in the food manufacturing industry, preferably in a government entity.</li><li>Diploma: <b>Minimum 3 years of experience</b> in the food manufacturing industry, preferably in a government entity.</li></ul><p><br></p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Job Summary</p><p>Responsible for monitoring and implementing quality management policies and procedures across the company, particularly within food industry operations. The role involves analyzing quality data, monitoring compliance, identifying non-conformities, supporting corrective actions, maintaining quality documentation, and preparing reports to ensure adherence to established quality standards and continuous improvement objectives.</p><p>Key Responsibilities</p><ul><li>Implement department policies and procedures in accordance with the company's quality management systems, governance requirements, and best practices.</li><li>Support the implementation and maintenance of Total Quality Management (TQM) systems in coordination with the direct supervisor.</li><li>Execute approved departmental work programs and quality initiatives.</li><li>Maintain and update the quality management information database for future reference and reporting.</li><li>Use approved electronic systems to manage and improve quality data and information.</li><li>Monitor departmental Key Performance Indicators (KPIs), track achievement rates, and prepare performance reports for the direct supervisor.</li><li>Ensure quality awareness guidelines, policies, and instructions are properly communicated and displayed in designated areas.</li><li>Monitor the implementation of quality management policies and procedures in accordance with the latest applicable international standards and requirements.</li><li>Analyze quality-related data, statistics, and performance indicators and submit findings to the direct supervisor.</li><li>Identify and document operational non-conformities through <b>Non-Conformance Reports (NCRs)</b>.</li><li>Monitor the implementation of approved corrective and preventive actions related to identified non-conformities.</li><li>Conduct compliance checks to ensure adherence to the company's applicable quality management standards and procedures.</li><li>Support departments and production facilities during internal quality audits and follow up on audit requirements to ensure compliance.</li><li>Monitor the company's quality documentation and forms management system to ensure all departments are using the latest approved versions of procedures, policies, and quality forms.</li><li>Monitor product quality and identify any defects or deviations from established company standards.</li><li>Prepare and submit quality-related reports to the direct supervisor, including:</li><li>Quality Control Reports</li><li>Non-Conformance Reports (NCRs)</li><li>Quality Objectives Reports</li><li>KPI Analysis Reports</li><li>Quality Performance Reports</li><li>Other reports related to quality management activities.</li><li>Support continuous improvement initiatives by identifying trends, potential risks, and opportunities for improving quality performance.</li><li>Perform any other duties within the scope of the position as assigned by the supervisor.</li></ul><p>Required Skills &amp; Competencies</p><ul><li>Good understanding of quality control procedures and international, local, and regional standards applicable to the food industry.</li><li>Strong attention to detail and ability to identify product defects or deviations from established quality standards.</li><li>Strong analytical and logical thinking skills.</li><li>Ability to collect, analyze, and interpret data and statistics.</li><li>Ability to prepare professional reports and clearly communicate technical information.</li><li>Strong organizational and time-management skills.</li><li>High level of accuracy, accountability, and attention to detail.</li><li>Professional, objective, and ethical approach.</li><li>Strong observation and problem-solving skills.</li><li>Good knowledge of company operations and quality requirements.</li><li>Ability to work effectively with different departments and teams.</li><li>Ability to maintain company confidentiality and protect company property.</li></ul><p>Language Requirements</p><ul><li>Ability to communicate effectively in <b>Arabic or English</b>, both verbally and in writing.</li></ul><p>Educational Qualifications &amp; Experience</p><p><b>Educational Qualifications:</b></p><ul><li>Bachelor's degree in <b>Science or Engineering</b>, or equivalent.</li><li>Diploma in <b>Science or Engineering</b>.</li><li>Preferably, professional certifications in the following areas:</li><li><b>Quality Management Systems – ISO 9001 Lead Auditor</b></li><li><b>Lean Six Sigma</b></li><li><b>Total Quality Management (TQM)</b></li><li><b>Environmental Management System (EMS)</b></li><li><b>Food Safety Management System – ISO 22000</b></li><li><b>FSSC 22000</b></li><li><b>ISO 45001</b></li><li><b>ISO 14001</b></li><li><b>HACCP</b></li><li><b>VACCP</b></li><li><b>TACCP</b></li><li><b>Halal</b></li><li><b>GMP</b></li></ul><p><b>Experience:</b></p><ul><li>Bachelor's degree: <b>Minimum 5 years of experience</b> in the food manufacturing industry, preferably in a government entity.</li><li>Diploma: <b>Minimum 3 years of experience</b> in the food manufacturing industry, preferably in a government entity.</li></ul><p><br></p><p><br></p><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities The Maintenance Controller for the Kuwait KC-130J Program at Al Mubarak airfield in Kuwait has is responsible for assisting the Maintenance Manager in daily operation and management and administration of the aircraft maintenance program, maintenance personnel, and maintenance actions required to support the customer’s missions and flight schedules. The Maintenance Controller assigns priorities and directs maintenance personnel to correct discrepancies, generate work orders, track and comply with all inspection requirements, compile and record maintenance data applicable to the Maintenance Information System (MIS), provide the ability to compare records and reports on consumption of material, quality control, and other aspects of production. Description: + Act as point of contact for all aircraft discrepancies that may affect daily operations and mission success. + Direct and coordinate all scheduled and unscheduled maintenance actions and workload planning + Attend meetings with the customer and provide information, reports, and official correspondence regarding aircraft status, mission capability, and maintenance planning information. + Coordinate with the Maintenance Manager and customer representatives in the management of scheduled and unscheduled maintenance to ensure the most efficient use of time and resources. + Analyze maintenance data to identify trends and initiate corrective actions as necessary. + Manage completion of maintenance actions and ensure the complete and accurate entry of data into the Maintenance Information System (MIS). + Coordinate with adjacent contractors and supporting agencies to acquire necessary tools, parts, support, materials, and equipment to prevent maintenance stoppages. + Ensure accuracy of documentation, (i.e., aircraft, engine, propeller, logbooks, weight and balance records, and MIS) and adherence to technical publications, policies, procedures, and safe maintenance practices. + Prepares and sends required reports and attend staff / customer meetings as required. + Coordinate troubleshooting efforts on complex maintenance discrepancies, making recommendations for courses of action based on aircraft service history analysis, applicable Maintenance Manual guidance, and operator experience. + Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts. + Monitor and track all life limited components, periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by the Periodic Maintenance Requirements Manual, Maintenance Requirement Cards (MRC)s, manufacturer’s specifications, and all applicable directives, orders, and instructions. + Coordinate with operations personnel and aircrew members to ensure the flight schedule is adequately supported and missions are able to be conducted within prescribed timelines. + Conduct off-station maintenance when required. + Assist in the conduct of maintenance on the flight line and back shops as required to ensure aircraft are available to support the flight schedule. + When necessary, perform other duties and functions critical to the support of the program. Qualifications Education / Certifications: + High School Diploma Must be able to obtain/maintain the following required certifications/qualifications: + This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance. + Aircraft Weight &amp; Balance certification + Safe for Flight certification + Aviation Gas Free Engineering (AVGFE) certification + Hydraulic Contamination certification + “I” Level &amp; “O” Level Tire &amp; Wheel certification + “I” Level MLG Brake repair / rebuilding qualification + Auxiliary Power Unit (APU) run qualification + Applicable Support Equipment licensing + Collateral Duty Inspector (CDI) qualification + Collateral Duty Quality Assurance Representative (CDQAR) qualification + Corrosion Prevention and Control and Aircraft Paint qualification + Confined Space Entry certification Experience: • Eight years’ aircraft maintenance experience with five years’ experience working on C-130J aircraft preferred. • Naval Aviation Maintenance Program (NAMP) 4790.2 or equivalent experience with Air Force Instruction 21-101 preferred. • Safe for Flight experience and certification specific to C-130J aircraft preferred. • Must have a working knowledge of first aid procedures to be used in an emergency. • Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures). Specific Requirements: + Must be United States (U.S.) citizen, be able to read, write, and understand the English language + Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration. + Must have a valid U.S. Driver’s License. + Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements. + Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc…) as required by local policies. + Must be willing and able to comply with all program functional requirements to include but not limited to: The performance of “I” Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp; MLG Tire re-building, MLG Brake repair/rebuilding, Battery maintenance support, and Oxygen Regulator testing/repair. + Must be willing and able to deploy off-site as required to support Kuwait Air Force operations. + Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required. + Must have the ability to communicate clearly, concisely and follow instructions when directed on assigned tasks. + Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions, to include but not limited to: The performance and completion of daily inspections (including the ability to inspect/sign off on all associated aircraft maintenance/technician specialties), marshalling/recovering aircraft, fueling, towing, mooring, and conducting post flight procedures to ensure aircraft are properly secured upon completion of maintenance. + As a Subject Matter Expert, must be willing to perform in-depth research, troubleshoot, and perform “O” and “I” level maintenance functions on all applicable aircraft systems and components necessary to return aircraft to a Full Mission Capable status; this includes determining material requirements, researching part numbers, ordering, tracking, and receiving materials as required to facilitate aircraft inspections/repairs. + Must be able to communicate directly with the customer, pilots, air crew members, management, and maintenance personnel to gather and relay pertinent data/information necessary to ensure aircraft depart timely and launches are not delayed. + Must have an in-depth knowledge of aircraft technical orders/job guides/publications—read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications. + Must be proficient in the use of Microsoft Office Programs, including Word, Excel, and PowerPoint to create/modify briefs, spreadsheets, and formal requests/documentation. + Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations. + Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations. + Must perform as a team member, contributing to the success of the C-130J maintenance department. + Must be dependable and timely in managing assigned tasks, perform consistent quality maintenance. + Must have a proven ability to work independently with minimal direction. Material &amp; Equipment Directly Used Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds What We Bring: At V2X we strive to be market competitive in our total reward offerings. Employee benefits include the following: • Healthcare coverage • Life insurance, AD&amp;D, and disability benefits • Retirement plan • Wellness programs • Paid time off, including holidays and leave of absences • Eligible Tuition Reimbursement • Learning and Development resources • Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are looking for a Senior Credit and Collection Controller to be part of our Finance team in Kuwait.</p><p>As a company specializing in Mechanical &amp; Electrical (MEP) Contracting, Facility Management, and After-Sales Services, we seek a results-driven professional with strong experience in credit control and collections.</p><p><strong>Key Responsibilities:</strong></p><ul><li>Monitor customer accounts and ensure timely collection of outstanding payments.</li><li>Manage aging reports and follow up on overdue receivables.</li><li>Review customer credit limits and assess credit risks.</li><li>Conduct collection negotiations while maintaining strong customer relationships.</li><li>Review contracts and payment terms to minimize financial risk.</li><li>Prepare collection reports and support month-end financial activities.</li><li>Coordinate with internal departments to resolve billing and payment issues.</li></ul><p><strong>Qualifications:</strong></p><ul><li>Bachelor's degree in Commerce, Finance, Accounting, or a related field.</li><li>5–7 years of experience in credit control, collections, or accounts receivable.</li><li>Proven experience in managing aging reports, client accounts, and achieving collection targets.</li><li>Experience in contract review, customer negotiations, and credit risk assessment.</li><li>Familiarity with ERP systems and financial reporting tools is preferred.</li><li>Previous experience in the MEP contracting, construction, engineering, facility management, or after-sales services sectors is highly preferred.</li><li>Valid driving license is required.</li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Credit control and accounts receivable management</p><p>AR aging analysis, DSO tracking, and collection forecasting</p><p>Credit risk assessment and customer credit limit review</p><p>Collection negotiation and dispute resolution</p><p>Contract and payment-terms review, including retention and progress billing</p><p>Account reconciliation and statement of account preparation</p><p>ERP systems and advanced Excel; financial reporting tools</p><p>Strong communication in Arabic and English</p><p>Cross-functional coordination with Sales, Projects, and Legal</p><p>High attention to detail, persistence, and professional integrity</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Material Controller role is integral to our operations within the Oil &amp; Gas sector, specifically focusing on managing piping and instrument materials. In this position, you will play a crucial role in ensuring that all materials are sourced, tracked, and maintained efficiently to support our project and construction planning initiatives. As a Material Controller, you will be at the forefront of our supply chain management, ensuring that we meet project deadlines and maintain high standards of quality and safety.</p><p>Joining our dynamic team means you will have the opportunity to grow your career in a fast-paced environment that values innovation and collaboration. We prioritize continuous learning and professional development, offering training programs that enhance your skills in material management and project execution. You will work closely with cross-functional teams, gaining insights into various aspects of project planning and execution, which will be invaluable for your career progression.</p><p>We foster a culture of teamwork and respect, where every member's contribution is valued. As you manage the logistics of materials, you will develop strong relationships with suppliers and internal stakeholders, enhancing your negotiation and communication skills. This role not only allows you to influence project outcomes but also positions you for future leadership opportunities within our organization.</p><p><b>Responsibilities:</b></p><ol><li>Oversee the procurement process for piping and instrument materials, ensuring timely delivery and compliance with project specifications to maintain project timelines.</li><li>Maintain accurate records of material inventory, utilizing inventory management systems to track stock levels and forecast future material needs based on project requirements.</li><li>Collaborate with project managers to understand material requirements, providing insights on material availability and lead times to optimize project planning.</li><li>Conduct regular audits of material usage and inventory levels, identifying discrepancies and implementing corrective actions to prevent material shortages or excesses.</li><li>Establish and maintain relationships with suppliers, negotiating contracts and pricing to ensure the best value for materials while adhering to quality standards.</li><li>Prepare and submit reports on material status and inventory levels to management, providing actionable insights that support decision-making processes.</li><li>Train and mentor junior staff on best practices in material management, fostering a culture of continuous improvement and knowledge sharing within the team.</li><li>Ensure compliance with safety and environmental regulations related to material handling and storage, minimizing risks associated with material management.</li><li>Participate in project meetings, contributing material-related insights that influence project strategies and execution plans.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Strong knowledge of material management processes, particularly in the Oil &amp; Gas industry, to ensure efficient procurement and inventory control.</li><li>Excellent communication skills, allowing for effective collaboration with suppliers and internal teams.</li><li>Proficiency in inventory management software and tools to track materials and manage stock levels effectively.</li><li>Strong analytical skills to assess material needs and forecast future requirements accurately.</li><li>Negotiation skills to secure favorable terms and pricing with suppliers, ensuring cost-effective procurement.</li><li>Attention to detail to maintain accurate records and compliance with project specifications and regulations.</li><li>Ability to work under pressure and manage multiple priorities, ensuring timely completion of material-related tasks.</li></ul></div>

<strong>Overview</strong> <br> <br> <p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p> <br> <strong>Responsibilities</strong> <br> <br> <p>The Maintenance Controller for the Kuwait KC-130J Program at Al Mubarak airfield in Kuwait has is responsible for assisting the Maintenance Manager in daily operation and management and administration of the aircraft maintenance program, maintenance personnel, and maintenance actions required to support the customer s missions and flight schedules. The Maintenance Controller assigns priorities and directs maintenance personnel to correct discrepancies, generate work orders, track and comply with all inspection requirements, compile and record maintenance data applicable to the Maintenance Information System (MIS), provide the ability to compare records and reports on consumption of material, quality control, and other aspects of production.</p> <p> </p> <p> <strong>Description:</strong> </p> <ul> <li>Act as point of contact for all aircraft discrepancies that may affect daily operations and mission success.</li> <li>Direct and coordinate all scheduled and unscheduled maintenance actions and workload planning</li> <li>Attend meetings with the customer and provide information, reports, and official correspondence regarding aircraft status, mission capability, and maintenance planning information.</li> <li>Coordinate with the Maintenance Manager and customer representatives in the management of scheduled and unscheduled maintenance to ensure the most efficient use of time and resources.</li> <li>Analyze maintenance data to identify trends and initiate corrective actions as necessary.</li> <li>Manage completion of maintenance actions and ensure the complete and accurate entry of data into the Maintenance Information System (MIS).</li> <li>Coordinate with adjacent contractors and supporting agencies to acquire necessary tools, parts, support, materials, and equipment to prevent maintenance stoppages.</li> <li>Ensure accuracy of documentation, (i.e., aircraft, engine, propeller, logbooks, weight and balance records, and MIS) and adherence to technical publications, policies, procedures, and safe maintenance practices.</li> <li>Prepares and sends required reports and attend staff / customer meetings as required.</li> <li>Coordinate troubleshooting efforts on complex maintenance discrepancies, making recommendations for courses of action based on aircraft service history analysis, applicable Maintenance Manual guidance, and operator experience.</li> <li>Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts.</li> <li>Monitor and track all life limited components, periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by the Periodic Maintenance Requirements Manual, Maintenance Requirement Cards (MRC)s, manufacturer s specifications, and all applicable directives, orders, and instructions.</li> <li>Coordinate with operations personnel and aircrew members to ensure the flight schedule is adequately supported and missions are able to be conducted within prescribed timelines.</li> <li>Conduct off-station maintenance when required.</li> <li>Assist in the conduct of maintenance on the flight line and back shops as required to ensure aircraft are available to support the flight schedule.</li> <li>When necessary, perform other duties and functions critical to the support of the program.<br> </li> </ul> <br> <strong>Qualifications</strong> <br> <br> <p> <strong>Education / Certifications:</strong> </p> <ul> <li>High School Diploma</li> </ul> <p>Must be able to obtain/maintain the following required certifications/qualifications:</p> <ul> <li> <p>This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance.</p> </li> <li>Aircraft Weight &amp; Balance certification</li> <li>Safe for Flight certification</li> <li>Aviation Gas Free Engineering (AVGFE) certification</li> <li>Hydraulic Contamination certification</li> <li> I Level &amp; O Level Tire &amp; Wheel certification</li> <li> I Level MLG Brake repair / rebuilding qualification</li> <li>Auxiliary Power Unit (APU) run qualification</li> <li>Applicable Support Equipment licensing</li> <li>Collateral Duty Inspector (CDI) qualification</li> <li>Collateral Duty Quality Assurance Representative (CDQAR) qualification</li> <li>Corrosion Prevention and Control and Aircraft Paint qualification</li> <li>Confined Space Entry certification</li> </ul> <p> <strong>Experience:</strong> </p> <p> Eight years aircraft maintenance experience with five years experience working on C-130J aircraft preferred.<br> Naval Aviation Maintenance Program (NAMP) 4790.2 or equivalent experience with Air Force Instruction 21-101 preferred.<br> Safe for Flight experience and certification specific to C-130J aircraft preferred.<br> Must have a working knowledge of first aid procedures to be used in an emergency.<br> Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures).</p> <p> </p> <p> <strong>Specific Requirements:</strong> </p> <ul> <li>Must be United States (U.S.) citizen, be able to read, write, and understand the English language</li> <li>Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration.</li> <li>Must have a valid U.S. Driver s License.</li> <li>Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements.</li> <li>Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc ) as required by local policies.</li> <li>Must be willing and able to comply with all program functional requirements to include but not limited to: The performance of I Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp;&nbsp;</li></ul> <p> </p> <p> </p>

URGENT REQUIREMENT FOR OIL & GAS SECTOR - BI Developer / Analyst<br><br>Developer <br><br> Job Id :100193615<br><br>Jobs<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>Applications are invited from qualified and experienced professionals for manpower supply on a secondment basis for a prestigious Oil & Gas Project in Kuwait with very attractive salary (to be disclosed once shortlisted):<br><br>Role Name: IT-09 – BI Developer / Analyst<br><br>Relevant Experience: Minimum 10 Years<br><br>Job Profile: Responsible for designing, developing, and maintaining business intelligence solutions including dashboards, reports, and analytics models that support data-driven decision-making.<br><br>Required Qualifications: Bachelor of Engineering [Information Technology / Computer etc.] or Equivalent Degree (> 3 years of course).<br><br>Interested candidates may send their CV, Degree Copy, Copy of passport & Kuwait Civil ID Copy (if available).<br><br>All applications shall be sent to: kuwait.hr@tcil.net.in<br><br>Last date of application: 15th August 2026<br><br>Candidates must clearly mention the Job Code being applied for in the email subject while applying. " IT-09 – BI Developer / Analyst "<br><br>Human Resources<br><br>Basic Details<br><br>Location : Ahmadi , Kuwait<br><br>Qualification<br><br>Posted : 1 month ago<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : Not-Mentioned<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : kuwait.hr@tcil.net.in

<p>Dean School of Architecture &amp; Design Classification: Executive / Academic Leadership Reports To: Vice President for Academic Affairs (VPAA)</p><p>The Dean of School of Architecture and Design serves as the chief academic officer, providing strategic vision and operational leadership for the School. The Dean promotes excellence in teaching, scholarship, and community engagement; supports innovative academic programs; and advances diversity in faculty and student recruitment. The role also involves fostering interdisciplinary collaboration, strengthening connections with local and international communities, and enhancing the School's visibility and resources to support its academic mission and future growth.</p><p>Key Responsibilities</p><ul><li>Provide strategic leadership and operational oversight for the School of Architecture and Design, including faculty, academic programs, budgets, and administrative functions.</li><li>Lead faculty recruitment, evaluation, mentoring, and professional development while fostering a culture of research, scholarship, and creative activity.</li><li>Maintain engagement with the Industry Advisory Committee and strengthen partnerships with industry, professional organizations, and community stakeholders to support internships, experiential learning, and graduate employability.</li><li>Support studio-based learning, student exhibitions, competitions, portfolios, and professional practice opportunities.</li><li>Ensure effective representation of the School in university leadership activities and maintain accurate public communications regarding programs, achievements, and student opportunities.</li><li>Lead institutional and programmatic accreditation, quality assurance, assessment, and continuous improvement initiatives, with knowledge of American higher education accreditation standards.</li><li>Manage strategic planning, resource allocation, and budget oversight for the School.</li><li>Oversee Architecture, Interior Design, and Graphic Design programs, ensuring academic excellence through curriculum development, assessment, scheduling, accreditation, and continuous improvement.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>Minimum Qualifications:</h2><p>The ideal candidate shall demonstrate experience in professional and academic positions, as well as a strong record in teaching and outstanding academic achievements at the international level. The candidate is expected to demonstrate ongoing contributions in their field of specialization through published research in recognized international scientific journals, as well as participation in exhibitions, conferences, and symposiums, in addition to possessing the following degrees, qualifications, and professional experience:</p><ul><li>Ph.D. or equivalent from a recognized university.</li><li>Rank of Professor in Architecture, Interior Design, Graphic Design, or a related discipline.</li><li>Distinguished record of teaching, research, scholarship, creative activity, and/or professional practice, with ongoing contributions through publications, exhibitions, conferences, and professional engagement.</li><li>Proven academic leadership experience, preferably at Dean level or equivalent, with a demonstrated ability to lead strategic initiatives and School development.</li><li>Experience with accreditation, assessment, quality assurance, and continuous improvement processes within architecture, design, or related disciplines.</li><li>Familiarity with credit-hour and semester-based academic systems.</li><li>Knowledge of higher education administration, including budgeting, human resources, and operational management.</li><li>Strong communication, stakeholder engagement, and partnership-building skills.</li><li>Experience working within American or internationally accredited higher education systems preferred.</li><li>Demonstrated ability to lead creative, design-oriented academic disciplines.</li><li>English proficiency required; Arabic proficiency is an advantage.</li></ul><h2>Additional Qualifications</h2><p>Priority will be given to applicants with the following qualifications:</p><ul><li>Managerial experience and the skills necessary to launch pioneering projects.</li><li>Multi-cultural skills.</li><li>Active participation in reputable organizations.</li><li>Knowledge of the methods of evaluation and related matters.</li><li>Documentation demonstrating support for the achievements of teachers and students.</li><li>Understanding of the latest teaching methods, including the use of technology in the teaching process.</li><li>Demonstration of a commitment to enriching the educational experience of students.</li></ul>

QC Engineer <br><br> Job Id :100195374<br><br>Jobboard subscription<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>???? **URGENT VACANCIES – KUWAIT**<br><br>???? QA/QC Engineer – Mechanical<br><br> Experience: 10–15 years<br><br>???? QA/QC Inspector – E&I<br><br> Experience: 5–10 years<br><br>Industry Experience Required<br><br>Candidates should have relevant experience in **Power, Water, Oil & Gas, and Construction Projects**.<br><br>Required Documents** Updated CV Civil ID Copy Work Permit Copy Passport Copy<br><br>Requirements<br><br>✅ Candidates must be **locally available in Kuwait**<br><br>✅ **Immediate joiners** preferred<br><br>???? **Send your updated CV to:**<br><br>**[career@falghanim.com](mailto:career@falghanim.com)**<br><br>Basic Details<br><br>Qualification<br><br>Posted : Today<br><br>Job Type : Full-Time<br><br>Jobboard subscription<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : Not-Mentioned<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : career@falghanim.com

Quality Control OFFICER<br><br>Job Id :100195395<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>HIRING – MMC Catering compny<br><br>Quality Control<br><br>Requirements<br><br>Experience in Food & Beverage / Central Kitchen<br><br>Knowledge of Food Safety & HACCP<br><br>Experience in Quality Control<br><br>Good knowledge of food hygiene and sanitation<br><br>Good communication and reporting skills<br><br>Send CV: drodesahcraigco@gmail.com<br><br>Basic Details<br><br>salary : 250 KWD<br><br>Experience : 2 Years<br><br>Location : Kuwait , Kuwait<br><br>Qualification<br><br>Posted : Today<br><br>Job Type : Full-Time<br><br>Company : MMC<br><br>Posted By: Dr. Odesah Craig Farm<br><br>Contact Info<br><br>Mobile : Not-Mentioned<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : drodesahcraigco@gmail.com

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Collaboration &amp; Coordination: </b></p><ul><li>Define cost control execution strategy, develop &amp; implement cost controls processes, practices and work instructions</li><li>Define project structure, develop &amp; maintain the project work breakdown structure (WBS) and cost breakdown structure (CBS)</li><li>Drive process improvements - Lead initiatives to improve cost control processes, enhancing project efficiency and predictability</li><li>Risk Mitigation - Develop proactive strategies to identify and mitigate cost-related risks across all project phases</li><li>Stakeholder Relations - Build strong relationships with key stakeholders, providing strategic insights to support informed decision-making</li><li>Lead initiatives to improve cost control processes, enhancing project efficiency, </li><li>Lead cross-functional meetings to communicate cost status and potential risks to key stakeholders</li></ul><p><b>Cost Control &amp; Reporting:</b></p><ul><li>Work with the estimate team to cascade the estimate into the control budget</li><li>Develop a control account system</li><li>Support PO generation and update process, Track actual cost, Review and coordinate invoices &amp; approval and Develop &amp; update cost reporting</li><li>Date Driven Decision making - Analyze project cost reports to support strategic planning and improve decision-making processes</li><li>Trend - Performance analysis - Conduct trend analysis on cost performance metrics to identify patterns and anticipate potential issues</li><li>KIP development - Establish, oversee, maintain and provide analysis on cost controls reporting, including earned value management EVM, dashboards and key performance indicators (KPI)</li><li>continuously monitor cost against the forecast, identifying variances and potential budget overruns</li></ul><p><b>Checks &amp; Balances:</b></p><ul><li>Audit - compliance - Conduct regular audits of data &amp; reports and invoices to maintain compliance with contracts and improve accountability</li><li>Lead cost review and change management meetings and secure approvals for major changes as needed and directed by management</li><li>Variance analysis - Track progress against baseline, analyze deviations</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Effective Communication: Facilitate timely communication of cost reports, risk to the project stakeholders</li><li>Cross Functional Collaboration: Foster strong partnerships with project managers to ensure alignment</li><li>Stakeholder Coordination - Serve as the primary point of contact for budget and cost-related discussions</li><li>Reporting &amp; Presentations: Develop and deliver detailed reports on cost performance for the entire project</li></ul></div>

<p><b>WHAT S ON YOUR PLATE? I</b>nbound &amp; Putaway: Receive GRNs against POs, check quantity/quality/expiry/temperature, label and put away using FIFO/FEFO and slotting rules. Picking &amp; Packing: Pick waves for store replenishment and customer orders using RF scanners; pack with correct dunnage and cold-chain handling. Dispatch &amp; Handover: Stage orders by route/store, load vehicles, hand over to last-mile teams with full documentation (STNs/DOs). Inventory Control: Daily cycle counts, weekly reconciliations, investigate variances, manage near-expiry, damages, RTVs. Quality &amp; Compliance: Maintain hygiene, HACCP/ISO 22000 checklists, temperature logs, pest control records, PPE, and 5S standards. Systems &amp; Reporting: Operate WMS/RF devices, update statuses in real time; prepare simple shift reports (receipts, pick lines, shrink). Cross-Functional: Coordinate with Demand planning, Ops, and Transport on delivery schedules, priorities, and exceptions.</p><p><strong>Desired Candidate Profile</strong></p><p>1-3 years in warehouse/DC (FMCG retail, e-commerce, or darkstore preferred). Working knowledge of FIFO/FEFO, batch/expiry control, and cold-chain handling. Comfortable with WMS/RF scanners; basic Excel/Google Sheets. Detail-oriented, fast, and reliable under time pressure; English required.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Role Purpose</p><p>The QA/QC &amp; Maintenance Manager acts as the operational custodian of product integrity, food safety compliance, and equipment reliability across the dates processing value chain.</p><p>This role drives end-to-end quality governance, enforces global food safety frameworks, and ensures uninterrupted asset performance to safeguard production continuity and regulatory compliance.</p><p>The position demands a hands-on leader with extensive experience in food manufacturing, strong command skills, and the ability to enforce standards on the production floor while fostering a culture of continuous improvement.</p><p><br></p><p>Key Focus Areas &amp; Responsibilities</p><p><br></p><p>QUALITY AND FOOD SAFETY MANAGEMENT ACTIVITIES</p><ul><li>Formulation of QA/QC goals &amp; objectives related to food safety systems</li><li>Research and development activities (new production procedures, formulation of new products and improving the techniques used in manufacturing)</li></ul><p>QUALITY ASSURANCE ACTIVITIES</p><ul><li>Oversee in-process quality checks and ensure compliance with product specifications during grading, washing, pitting, filling, pressing, and packing stages.</li><li>Implementing all activities related to prerequisite programs (PRPs) and Good Manufacturing Practices (GMP) and adopted food safety management system / assure that the systems are fully functional and audit-ready.</li></ul><p>(tool for verification and validation)</p><ul><li>internal audits and readiness exercises for regulatory, customer, and third-party audits. (based on food safety management system requirements)</li><li>Execute daily inspection routines covering personnel hygiene, facility sanitation, production lines, and utilities. (as a part of system validation and verification)</li></ul><p>QUALITY CONTROL ACTIVITIES</p><ul><li>Material sampling and examination (materials conformity according to national, international and company standards) which include raw material, packaging material, intermediate and final products</li><li>Investigate non-conforming materials or products, recommend disposition actions (according to handling of potentially unsafe products in food safety management system)</li><li>Establishing and implementing materials traceability system (with withdrawal and recall drills to assure traceability system validity)</li><li>Documentation, reports formulation, and appropriate actions taking according to analysis results (which include correction and corrective action selection)</li><li>Coordinate calibration for all critical measuring and monitoring devices. (based on control of monitoring and measuring activities in food safety management system)</li><li>Supplier evaluation based on materials inspection results and quality control activities related to material inspection (as a apart of material management)</li><li>Customer complains investigation, trouble shooting, and correction of root causes of such problems which are related to the production</li></ul><p>FOOD SAFETY MANAGEMENT ACTIVITIES</p><ul><li>Establishing and Implementing ISO 22000 system, formulation of prerequisite programs, operational prerequisite programs, and critical control points measures according to GMP, HACCP, ISO/FSSC 22000, and any relevant industry certifications as applicable in the scope of operations</li><li>Validation and Verification planning of all food safety prerequisite programs, including:</li><li>Personal hygiene and staff sanitation compliance</li><li>Cleaning and sanitation programs for equipment, utensils, and infrastructure</li><li>Pest/vermin control verification</li><li>Waste management and disposal controls</li><li>Allergen and cross-contamination control</li><li>Lead food safety incident investigations, risk assessments, and corrective/preventive action plans (CAPA).</li><li>Maintain an audit-ready environment at all times, with documentation, logs, and reports properly controlled and accessible.</li><li>Continual food safety management system based on information’s collected from quality management, internal and external auditing notes, management requirements, and modification on national and international standards</li></ul><p><br></p><p>Leadership, Training &amp; People Development</p><ul><li>Train production and QC personnel on food safety, hygiene, GMP, SOP adherence, and inspection routines.</li><li>Demonstrate strong leadership and the ability to command respect on the production floor while maintaining team engagement.</li><li>Foster a disciplined, process-driven, and safety-first culture across all shifts.</li><li>Ensure adequate knowledge transfer and upskilling to empower teams to perform tasks independently.</li><li>Lead toolbox talks, refresher training programs, and performance coaching sessions.</li></ul><p><br></p><p>Reporting, Documentation &amp; Communication</p><ul><li>Ensure all activities are recorded with accuracy, including inspection logs, deviation reports, monitoring sheets, maintenance logs, and CAPA actions.</li><li>Produce structured daily/weekly quality and maintenance reports for management review.</li><li>Communicate effectively across departments—production, procurement, warehouse, and management—to ensure alignment and fast decision-making.</li><li>Maintain document control in line with food safety management standards.</li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><br></p><p>Qualifications</p><ul><li>Bachelor’s degree in Food Science, Food Technology, Industrial Engineering, Mechanical Engineering, or relevant field.</li><li>Minimum 7–10 years of experience in food processing, ideally in high-volume production environments.</li><li>Certification in HACCP, FSSC 22000, or Lead Auditor training</li><li>Strong working knowledge of HACCP, GMP, FSSC/ISO standards, and food safety risk management and control</li><li>Proven experience in quality assurance, quality control, and production process monitoring.</li><li>Demonstrated capability in troubleshooting, root-cause analysis, and implementing CAPA.</li><li>Competent leadership skills with ability to enforce compliance and manage diverse teams.</li><li>Strong communication, reporting, and documentation skills.</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p>Talabat is part of the Delivery Hero Group, the world’s pioneering local delivery platform, our mission is to deliver an amazing experience—fast, easy, and to your door. We operate in around 65 countries worldwide. Headquartered in Berlin, Germany. Delivery Hero has been listed on the Frankfurt Stock Exchange since 2017 and is part of the MDAX stock market index.</p><br><br>Job Description<br><p><strong>WHAT’S ON YOUR PLATE?</strong></p><br><ul><li>Inbound &amp; Putaway: Receive GRNs against POs, check quantity/quality/expiry/temperature, label and put away using FIFO/FEFO and slotting rules.</li><li>Picking &amp; Packing: Pick waves for store replenishment and customer orders using RF scanners; pack with correct dunnage and cold-chain handling.</li><li>Dispatch &amp; Handover: Stage orders by route/store, load vehicles, hand over to last-mile teams with full documentation (STNs/DOs).</li><li>Inventory Control: Daily cycle counts, weekly reconciliations, investigate variances, manage near-expiry, damages, RTVs.</li><li>Quality &amp; Compliance: Maintain hygiene, HACCP/ISO 22000 checklists, temperature logs, pest control records, PPE, and 5S standards.</li><li>Systems &amp; Reporting: Operate WMS/RF devices, update statuses in real time; prepare simple shift reports (receipts, pick lines, shrink).</li><li>Cross-Functional: Coordinate with Demand planning, Ops, and Transport on delivery schedules, priorities, and exceptions.</li></ul><p><strong>KPIs</strong></p><br><ul><li>Receiving accuracy ≥99%; Pick accuracy ≥99.5%</li><li>On-time dispatch (OTD/OTIF) ≥98%</li><li>Inventory variance ≤0.2%, shrink % within target</li><li>Hygiene &amp; temperature log 100% compliance</li></ul><br>Qualifications<br><p><strong>WHAT DID WE ORDER?</strong></p><br><ul><li>1–3 years in warehouse/DC (FMCG retail, e-commerce, or darkstore preferred).</li><li>Working knowledge of FIFO/FEFO, batch/expiry control, and cold-chain handling.</li><li>Comfortable with WMS/RF scanners; basic Excel/Google Sheets.</li><li>Detail-oriented, fast, and reliable under time pressure; English required..</li></ul><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>About the opportunity<br><p><strong>WHAT’S ON YOUR PLATE?</strong></p><br><br><ul><li>Inbound &amp; Putaway: Receive GRNs against POs, check quantity/quality/expiry/temperature, label and put away using FIFO/FEFO and slotting rules.</li><li>Picking &amp; Packing: Pick waves for store replenishment and customer orders using RF scanners; pack with correct dunnage and cold-chain handling.</li><li>Dispatch &amp; Handover: Stage orders by route/store, load vehicles, hand over to last-mile teams with full documentation (STNs/DOs).</li><li>Inventory Control: Daily cycle counts, weekly reconciliations, investigate variances, manage near-expiry, damages, RTVs.</li><li>Quality &amp; Compliance: Maintain hygiene, HACCP/ISO 22000 checklists, temperature logs, pest control records, PPE, and 5S standards.</li><li>Systems &amp; Reporting: Operate WMS/RF devices, update statuses in real time; prepare simple shift reports (receipts, pick lines, shrink).</li><li>Cross-Functional: Coordinate with Demand planning, Ops, and Transport on delivery schedules, priorities, and exceptions.</li></ul><p><strong>KPIs</strong></p><br><br><ul><li>Receiving accuracy ≥99%; Pick accuracy ≥99.5%</li><li>On-time dispatch (OTD/OTIF) ≥98%</li><li>Inventory variance ≤0.2%, shrink % within target</li><li>Hygiene &amp; temperature log 100% compliance</li></ul><br>What you need to be successful<br><p><strong>WHAT DID WE ORDER?</strong></p><br><br><ul><li>1–3 years in warehouse/DC (FMCG retail, e-commerce, or darkstore preferred).</li><li>Working knowledge of FIFO/FEFO, batch/expiry control, and cold-chain handling.</li><li>Comfortable with WMS/RF scanners; basic Excel/Google Sheets.</li><li>Detail-oriented, fast, and reliable under time pressure; English required..</li></ul><br>Who we are<br><p>Talabat is part of the Delivery Hero Group, the world’s pioneering local delivery platform, our mission is to deliver an amazing experience—fast, easy, and to your door. We operate in around 65 countries worldwide. Headquartered in Berlin, Germany. Delivery Hero has been listed on the Frankfurt Stock Exchange since 2017 and is part of the MDAX stock market index.</p><br><br> <br><br> </div>

<p>Candidates must demonstrate direct, hands-on experience in all of the following areas</p><ul><li>Quality audits - conducting structured, recurring audits of service delivery and staff performance</li><li>SOP development and enforcement - authoring, updating, and ensuring adherence to operational standards</li><li>Staff evaluations - formal performance assessment of frontline and field-based employees</li><li>Training and coaching - developing and delivering quality-focused training programs for service staff</li><li>Root-cause analysis - systematically diagnosing recurring service failures and quality gaps</li><li>Corrective action programs - designing and tracking closure of corrective and preventive actions</li><li>Service quality improvement initiatives - leading structured programs with defined KPIs and outcomes</li><li>Customer complaint investigations - managing escalations, resolutions, and pattern analysis</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b><u>Function:</u> &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</b></p><p>The Senior QA/QC Officer is responsible for overseeing and maintaining the Quality Assurance and Quality Control(QA/QC) systems across all operational units and the Head Office. The role ensures that food products, processes, facilities and documentation comply with company standards, food safety regulations, customer requirements, and applicable quality management systems. The position serves as a key link between operations, productions, procurement and management to promote continuous improvement in food quality and safety.</p><p><br></p><p><b><u>Primary Duties &amp; responsibilities include but not limited to:</u></b></p><p><b>Quality Assurance &amp; Food Safety Management</b></p><ul><li>Implement, maintain, and continuously improve the company's Quality Management System (QMS) and Food Safety Management System (FSMS). </li><li>Ensure compliance with HACCP, GMP, GHP, food safety regulations, and company quality standards. </li><li>Develop, review, and update quality procedures, work instructions, policies, and records. </li><li>Monitor the effectiveness of food safety and quality programs across all operational locations.</li></ul><p><b>Quality Control Operations</b></p><ul><li>Oversee product inspections, process monitoring, and quality verification activities. </li><li>Ensure raw materials, packaging materials, and finished products meet established specifications. </li><li>Review and verify quality control records, inspection reports, and test results. </li><li>Investigate quality issues and implement corrective and preventive actions (CAPA).</li></ul><p><b>Head Office Responsibilities</b></p><ul><li>Maintain centralized QA/QC documentation and records. </li><li>Prepare quality reports, KPI dashboards, and management review presentations. </li><li>Coordinate quality-related communications between Head Office and operational sites. </li><li>Monitor compliance status and follow up on corrective actions across all branches or facilities. </li><li>Support management in developing quality objectives and improvement initiatives.</li></ul><p><b>Audits &amp; Compliance</b></p><ul><li>Plan and conduct internal quality and food safety audits. </li><li>Assist in regulatory inspections, customer audits, and third-party certification audits. </li><li>Ensure timely closure of audit findings and non-conformities. </li><li>Monitor compliance with local food regulations and certification requirements.</li></ul><p><b>Training &amp; Development</b></p><ul><li>Conduct quality and food safety training for employees. </li><li>Promote awareness of hygiene, sanitation, food safety, and quality standards. </li><li>Coach operational teams on best practices and compliance requirements.</li></ul><p><b>Supplier Quality Management</b></p><ul><li>Assist in supplier evaluation and approval processes. </li><li>Monitor supplier performance and quality compliance. </li><li>Investigate supplier-related quality issues and coordinate corrective actions. </li></ul><p><b>Continuous Improvement</b></p><ul><li>Analyze quality trends, complaints, audit findings, and non-conformance data. </li><li>Recommend process improvements to enhance product quality, food safety, and operational efficiency. </li><li>Participate in new product development and process validation activities as required.</li><li>Travel regionally as required to conduct audits and ensure standardization across all locations.</li><li>Perform any additional duties assigned by the Direct Manager.</li></ul><p>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b><u>Skills:</u></b></p><ul><li>Strong analytical and problem-solving skills.</li><li>Excellent communication and report-writing abilities.</li><li>Leadership and team coordination skills.</li><li>Attention to detail and organizational skills.</li><li>Ability to work independently and manage multiple priorities.</li><li>Knowledge of food manufacturing, catering, retail food operations, or central kitchen operations (as applicable).</li></ul><p><br></p><p><b><u>Qualifications:</u></b></p><ul><li>Bachelor's Degree in Food Science, Food Technology, Microbiology, Quality Management, or a related field.</li><li>Minimum 3–5 years of experience in QA/QC within the food industry.</li><li>Strong knowledge of HACCP, GMP, GHP, ISO 22000, and food safety regulations.</li><li>Experience in conducting internal audits and managing corrective actions.</li><li>Proficiency in Microsoft Office applications and quality documentation systems.</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a dedicated CCTV and Networking Technician to join our dynamic team in Kuwait. This role is perfect for individuals with a passion for technology and a desire to make a significant impact in the field of security and networking. As a technician, you will have the opportunity to work with cutting-edge technology and contribute to the safety and security of various environments. This position is not just a job; it's a stepping stone for your career in a rapidly evolving industry.</p><p>At our company, we believe in fostering a culture of continuous learning and professional development. You will have access to training programs that enhance your technical skills and keep you updated with the latest industry trends. Our supportive team environment encourages collaboration and knowledge sharing, ensuring that you grow alongside your colleagues. We understand that your career progression is important, and we are committed to providing you with the resources and opportunities to advance your career.</p><p>As a CCTV and Networking Technician, you will play a crucial role in maintaining and installing security systems that protect our clients' assets. You will be involved in troubleshooting issues, ensuring systems are operational, and providing exceptional customer service. If you are looking for a role that offers both challenges and rewards, this is the perfect opportunity to elevate your career in the technology sector.</p><p><b>Responsibilities:</b></p><ol><li>Install, configure, and maintain CCTV systems, ensuring high-quality video surveillance and optimal performance for various clients.</li><li>Conduct thorough troubleshooting of networking issues, using diagnostic tools to identify and resolve connectivity problems effectively.</li><li>Provide technical support to clients, addressing inquiries and ensuring their security systems operate seamlessly.</li><li>Collaborate with team members to design and implement network infrastructures that meet clients' specific security needs and requirements.</li><li>Document installation processes and maintenance activities to maintain accurate records and facilitate future troubleshooting.</li><li>Stay updated on industry trends and advancements in CCTV and networking technologies to provide clients with the best solutions available.</li><li>Train clients on the proper use of installed systems, ensuring they are equipped to utilize the technology effectively.</li><li>Perform regular system checks and preventive maintenance to ensure all equipment remains in optimal condition.</li><li>Assist in the development of proposals and project plans to expand our service offerings and enhance client satisfaction.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Proficiency in installing and configuring CCTV systems to ensure optimal security coverage.</li><li>Strong understanding of networking principles and troubleshooting techniques for effective problem resolution.</li><li>Excellent customer service skills to provide support and training to clients.</li><li>Knowledge of industry standards and best practices in security system installations.</li><li>Ability to work collaboratively within a team to achieve project goals efficiently.</li><li>Strong documentation skills to maintain accurate records of installations and maintenance.</li><li>Willingness to stay updated with evolving technologies and industry trends to enhance service offerings.</li></ul></div>