فنى كابلات منخفض الفولت في الكويت

<p>Familiar with and knowledgeable in Permit to Work (PTW) systems applicable to Oil &amp; Gas operations. Responsible for overseeing and executing all field instrumentation activities (Fire Alarm, Gas Detection, and Fire Suppression Systems and Load shifting), including installation, testing, pre-commissioning, and commissioning during the construction phase. Verify that all activities are carried out in compliance with IFC drawings, approved method statements, and Inspection Test Plans (ITPs). Supervise instrumentation works such as cable pulling, cable termination, tubing installation, junction box installation, and panel wiring activities. Coordinate and assign daily work activities to subcontractors and submit daily progress reports to the Engineer. Ensure the safe installation, testing, and commissioning of instrumentation and control systems, including field devices, control panels, junction boxes, and cabling, in accordance with approved drawings and project specifications. Ensure proper segregation and routing of signal, control, and power cables during installation. Witness and support functional testing, loop checking, and pre-commissioning activities in coordination with QA/QC and commissioning teams. Assist in the preparation, tracking, and closure of punch list items arising from inspections, pre-commissioning, and commissioning activities. Maintain red-line mark-up drawings and support the design team during as-built documentation, loop folders, and handover dossiers. Coordinate closely with electrical, mechanical, and process disciplines to ensure smooth execution of multidisciplinary activities. Work in collaboration with the commissioning team to plan and execute system energization and loop testing activities. Ability to Supervise the load shifting of DCS, ESD. Liaise with client representatives to facilitate inspections, obtain approvals, and provide progress updates.</p>

<p>Key Responsibilities: Install, maintain, calibrate, troubleshoot, and repair industrial instrumentation and control systems. Perform installation and maintenance of pressure, temperature, flow, and level instruments. Carry out calibration and testing of field instruments as per specifications. Troubleshoot instrument faults and identify problems in control loops. Install and terminate instrument cables, tubing, junction boxes, and control wiring. Read and interpret instrumentation drawings, loop diagrams, P&amp;IDs, and wiring diagrams. Assist with commissioning, testing, and start-up of instrumentation systems. Maintain accurate calibration and maintenance records. Follow site safety procedures and quality standards. Technical Skills Hands-on experience with pressure, temperature, flow, and level transmitters. Knowledge of control valves, positioners, switches, gauges, sensors, and actuators. Experience with 4 20 mA, HART, pneumatic, and electronic instrumentation. Ability to use multimeters, loop calibrators, pressure calibrators, and other test equipment. Knowledge of instrument calibration, loop checking, and troubleshooting. Ability to read P&amp;IDs, instrument index, loop diagrams, cable schedules, and hook-up drawings. Basic knowledge of PLC, DCS, SCADA, and control systems is an advantage. Knowledge of instrument tubing, impulse lines, cable termination, and gland installation. Understanding of hazardous-area instrumentation and industrial safety is preferred.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidate Requirements : Minimum 3+ years of relevant industrial instrumentation experience. ITI/Diploma in Instrumentation, Electronics, Electrical, or related field preferred. Relevant technical qualification/certification is preferred. Strong troubleshooting and calibration skills. Good understanding of industrial instrumentation and control systems. Ability to work independently and as part of a technical team. Physically fit and willing to work in industrial/site environments.</p>

<p>Under general supervision, performs Artificial Lift (AL) installations and pulls, routine checks, and troubleshooting. Provides instruction and technical support to customer personnel in the proper handling and operating procedures of ALs. Performs basic well production analysis and repair of AL equipment and tests, splices, and repairs cable. Prepares paperwork to include IFTA reports, billable and non-billable hours, and mileage. Trains and coaches new hires in basic principles. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Maintains mechanical performance of truck used in transportation to and from the field. Trains and mentors lower level technicians at the well site. Performs basic mathematical calculations involving addition, subtraction, multiplication, and division is required. Basic reading comprehension and writing skills are required.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High School or Technical Diploma or a University Degree preferred</li><li>3 years to 8 years of experience in artificial lift operations including ESP Installations, pullouts, Y-tool, Shrouds and HPS is preferred</li><li>Willing work on a rotational schedule in remote locations in Kuwait (2 months On / 1 month Off)</li><li>Skills are typically acquired through completion of high school or similar education and 3 to 4 years of experience in artificial lift operations.</li></ul>

<p>The Data Center Electrical Engineer is responsible for the engineering-level ownership, reliability, safety, and performance of the data center electrical power infrastructure, from the utility intake through to the rack level. The role manages electrical maintenance strategy, switching procedures, electrical safety programs, vendor activities, spare parts planning, and system performance. The Electrical Engineer also directs the electrical manning technicians, authorizes and leads critical switching operations, and acts as the electrical authority during incidents and escalations.</p><p>Key Responsibilities</p><ul><li>Take engineering ownership of the data center electrical infrastructure, including MV/LV distribution systems, HV/MV switchgear, GIS/AIS, transformers, RMUs, UPS systems, STS/ATS systems, generators, fuel systems, batteries, and protection systems.</li><li>Develop, maintain, and control electrical switching procedures.</li><li>Authorize, lead, and supervise HV/MV and critical LV switching operations.</li><li>Manage the arc flash and electrical safety program for the data center.</li><li>Ensure full compliance with Lockout/Tagout, LOTO, Permit to Work, PTW, and electrical isolation requirements.</li><li>Develop and manage the annual electrical Planned Preventive Maintenance, PPM, program in line with OEM recommendations.</li><li>Coordinate generator load-bank testing and generator readiness programs in accordance with NFPA 110.</li><li>Prepare, review, and maintain electrical Standard Operating Procedures, SOPs, Methods of Procedure, MOPs, and Emergency Operating Procedures, EOPs.</li><li>Review and approve the safe execution of electrical procedures and maintenance activities.</li><li>Coordinate electrical maintenance vendors and supervise OEM major services, testing, repairs, and equipment overhauls.</li><li>Develop and maintain the spare-parts and critical-inventory plan for electrical systems.</li><li>Analyze electrical system performance, protection settings, load profiles, power usage, and equipment capacity.</li><li>Identify and implement opportunities for energy optimization and improved electrical system performance.</li><li>Lead root cause analysis for electrical faults, failures, alarms, and service interruptions.</li><li>Develop and follow up corrective and preventive actions arising from electrical incidents.</li><li>Direct, support, develop, and train the electrical manning technicians.</li><li>Support integrated systems testing, testing and commissioning, and electrical system readiness activities.</li><li>Support predictive maintenance programs, including thermography, transformer oil sampling, and condition monitoring.</li><li>Act as the electrical technical authority during incidents, emergencies, and operational escalations.</li><li>Provide 24/7 on-call support and shift coverage assistance when required.</li></ul><p>Minimum Qualifications</p><ul><li>Bachelor s degree in Electrical Engineering.</li><li>Minimum of five years of experience in electrical operations and maintenance involving MV/LV electrical systems.</li><li>At least two years of experience in a data center, critical facility, industrial facility, or similarly high-availability environment.</li><li>Practical experience with HV/MV switching and critical LV switching operations.</li><li>Working knowledge of electrical protection systems, switching procedures, isolation practices, and electrical safety requirements.</li><li>Working knowledge of generator control systems such as DeepSea, ComAp, or Woodward.</li><li>Familiarity with NFPA 110 and applicable NEC references.</li><li>Demonstrated experience in electrical maintenance planning, technical procedure writing, and vendor management.</li><li>Strong technical reporting and documentation skills.</li><li>Fluency in written and spoken English.</li></ul><p>Preferred Qualifications and Certifications</p><ul><li>HV/MV switching authorization or license issued or recognized by the relevant GCC regulatory authority.</li><li>OEM training or certification related to UPS and critical-power systems from Schneider Electric, Eaton, Vertiv, ABB, or an equivalent manufacturer.</li><li>OEM training or certification related to MV/LV switchgear and protection systems from Schneider Electric, ABB, Siemens, Eaton, or an equivalent manufacturer.</li><li>OEM training or certification related to generators from Caterpillar, Cummins, MTU, Rolls-Royce, Kohler, SDMO, or an equivalent manufacturer.</li><li>OEM training or certification related to STS, ATS, and power-distribution systems from Vertiv, ABB, Eaton, Socomec, or an equivalent manufacturer.</li></ul><p>Other Requirements</p><ul><li>Willingness to work in a critical data center environment.</li><li>Availability for 24/7 on-call support.</li><li>Ability to support shift coverage, planned maintenance, emergency response, and critical switching activities.</li><li>Ability to coordinate with operations, facilities, safety, vendors, and OEM service teams.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in Electrical Engineering.</li><li>Minimum of five years of experience in electrical operations and maintenance involving MV/LV electrical systems.</li><li>At least two years of experience in a data center, critical facility, industrial facility, or similarly high-availability environment.</li><li>Practical experience with HV/MV switching and critical LV switching operations.</li><li>Working knowledge of electrical protection systems, switching procedures, isolation practices, and electrical safety requirements.</li><li>Working knowledge of generator control systems such as DeepSea, ComAp, or Woodward.</li><li>Familiarity with NFPA 110 and applicable NEC references.</li><li>Demonstrated experience in electrical maintenance planning, technical procedure writing, and vendor management.</li><li>Strong technical reporting and documentation skills.</li><li>Fluency in written and spoken English.</li><li>HV/MV switching authorization or license issued or recognized by the relevant GCC regulatory authority.</li><li>OEM training or certification related to UPS and critical-power systems from Schneider Electric, Eaton, Vertiv, ABB, or an equivalent manufacturer.</li><li>OEM training or certification related to MV/MV switchgear and protection systems from Schneider Electric, ABB, Siemens, Eaton, or an equivalent manufacturer.</li><li>OEM training or certification related to generators from Caterpillar, Cummins, MTU, Rolls-Royce, Kohler, SDMO, or an equivalent manufacturer.</li><li>OEM training or certification related to STS, ATS, and power-distribution systems from Vertiv, ABB, Eaton, Socomec, or an equivalent manufacturer.</li><li>Willingness to work in a critical data center environment.</li><li>Availability for 24/7 on-call support.</li><li>Ability to support shift coverage, planned maintenance, emergency response, and critical switching activities.</li><li>Ability to coordinate with operations, facilities, safety, vendors, and OEM service teams.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p> The position contributes directly to revenue growth and market expansion by identifying new project opportunities, supporting tendering activities, and managing assigned accounts. The role supports the company’s strategic objectives by strengthening its presence in the electrical projects market and ensuring customer satisfaction through effective coordination and project follow-up.</p><ul><li>Manage project opportunities from inquiry to award.</li><li>Coordinate technical and commercial proposals with internal teams.</li><li>Follow up on quotations, negotiations, and project progress.</li><li>Drive sales for all electrical products (LV switchgear, busducts, Earthing, lighting,&nbsp;wiring devices, etc.).</li><li>Identify and develop opportunities with contractors, consultants, EPCs, and end-users.</li><li>Review project specifications and provide suitable technical solutions and proposals.</li><li>Prepare accurate BOQs, quotations, and technical/commercial submissions.</li><li>Follow up on tenders, approvals, and project awards.</li><li>Build strong relationships with VIP consultancy offices, VVIP clients, and major Kuwaiti ministries.</li><li>Conduct site visits to support project execution and resolve issues.</li><li>Monitor market trends and maintain updated sales forecasts and reports.</li><li>Support product development, identify market needs, introduce new product lines, and establish new strategic relationships with suppliers and partners.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>4–6 years of experience in Project Sales.</li><li>Experience in LV Switchgear and other related electrical products.</li><li>Strong communication and relationship-building skills.</li><li>Strong exposure to LV/MV switchgear, busducts, and related electrical products</li><li>Experience in handling government, industrial, and large construction projects</li></ul><p><br></p></div>

Urgent Requirements<br><br> Electrician <br><br> Job Id :100195420<br><br>Jobboard subscription<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>9/9/2026<br><br>Fahaheel - AL DARWAZA GENERAL TRADING COMPANY<br><br>Candidates Only from Inside Kuwait ( Local requirement )<br><br>Transportation available from Fahaheel, Mangaf<br><br>Helper. = 200 KD ( 8 Hours 26 days )<br><br>Electrician ( GI pipe conduit & cable Tray trunk ) = 270 KD<br><br>Every month date 15'th will provide salary )<br><br>( faheel, Mangaf only these areas Candidates call me )<br><br>Contact : 97961420 , *<br><br>Basic Details<br><br>Location : Fahaheel , Kuwait<br><br>Qualification<br><br>Posted : Today<br><br>Job Type : Full-Time<br><br>Jobboard subscription<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : +965 97961420<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : Not-Mentioned

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Long Description <br><br>Job Summary <br><br>Job Responsibilities <br> Job description </span><p><strong>Job Purpose:</strong></p><br> <ol> <li>To ensure the successful execution of low voltage and ICT projects with strict adherence to QA/QC standards, while providing presales technical support and managing site activities to deliver projects on time and within budget.</li> </ol> <p><strong>Key Responsibilities:</strong></p><br> <ul> <li>Prepare and review&nbsp;<strong>technical &amp; commercial proposals</strong>&nbsp;for tenders and company projects.</li> <li>Manage&nbsp;<strong>QA/QC activities</strong>, including preparation and review of SAT, FAT, ITP, NCR, and punch list closure.</li> <li>Supervise installation, testing, and commissioning of low voltage systems such as:</li> <li>CCTV</li> <li>Access Control Systems</li> <li>Gate Barrier &amp; Parking Management Systems</li> <li>Public Address &amp; Voice Evacuation Systems</li> <li>Audio Visual Systems</li> <li>BMS (Johnson Controls, Siemens, Honeywell)</li> <li>Coordinate with vendors and subcontractors to ensure compliance with project specifications.</li> <li>Attend clarification meetings with clients and follow up on approvals.</li> <li>Prepare site reports, monitor progress, and ensure compliance with health and safety standards.</li> <li>Manage&nbsp;<strong>handover documentation</strong>&nbsp;and ensure smooth project delivery.</li> <li>Stay updated with market requirements and general specifications.</li> </ul> <br> <br> <br><br>Candidate Requirements <br><p>•&nbsp;&nbsp; &nbsp;Bachelor Degree in engineering field&nbsp;<br>•&nbsp;&nbsp; &nbsp;3 to 5 &nbsp;years of experience in smilar position<br>•&nbsp;&nbsp; &nbsp;Ability to work in team&nbsp;</p><br> <p>•&nbsp;&nbsp; &nbsp;good interpersonal skills.</p><br> <p>•&nbsp;&nbsp; &nbsp;Attention to details&nbsp;<br>&nbsp;</p><br><br><br>Education <br><br><br> </div>

Urgent Requirements<br><br> Helper <br><br> Job Id :100194086<br><br>Jobs<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>17/8/2026<br><br>Fahaheel - AL DARWAZA GENERAL TRADING COMPANY<br><br>Candidates Only from Inside Kuwait ( Local requirement )<br><br>Transportation available from Fahaheel, Mangaf, Mahaboullah.<br><br>GI Cable tray fabricator ( Must be need experienced candidates ) = 300 KD<br><br>Fabricator structure ( Must be need very well drowning knowledge) = 325 KD ( 8 hours 26 days )<br><br>Fitter ( Must be knowledge of Gas cutting & fittings) = 260 KD<br><br>Helper. = 200 KD<br><br>Grinder. = 200 KD<br><br>Tack welder + Grinder = 220 KD<br><br>Mig welder ( Co2 ) = 305 KD<br><br>Rigger ( over head operator crane ) = 240 KD<br><br>Sand Blaster = 270 KD<br><br>Spray Painter ( Airless ) = 280 KD<br><br>( faheel, Mangaf & Mahabulla only these areas Candidates call me )<br><br>Contact : 97961420 , *<br><br>Geographic Reference<br><br>Basic Details<br><br>Location : Fahaheel , Kuwait<br><br>Qualification<br><br>Posted : 23 days ago<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : +965 97961420<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : Not-Mentioned

<p>Supervise telecom civil works including tower foundations, precast installation, equipment plinths, fencing, cable trenching, earthing, and related civil works. Ensure work is executed according to approved drawings, specifications, quality standards, and client requirements. Coordinate with clients, subcontractors, suppliers, and internal project teams. Conduct site inspections and resolve technical/site issues. Monitor project progress, workmanship, measurements, materials, and manpower. Prepare daily progress reports, work schedules, and project documentation. Ensure compliance with HSE requirements and company safety procedures. Support project handover, snag rectification, and client acceptance activities. Manage multiple project sites and provide timely progress updates.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma or Bachelor s Degree in Civil Engineering.</li><li>Minimum 3 5 years of experience in telecom civil construction.</li><li>Experience in telecom tower foundations and site infrastructure.</li><li>Good knowledge of engineering drawings and project specifications.</li><li>Strong communication, leadership, coordination, and problem-solving skills.</li><li>Proficiency in MS Office and technical report preparation.</li><li>Ability to travel independently to multiple project sites.</li><li>Valid Kuwait Driving License is mandatory.</li></ul>

Urgent Requirements<br><br> Helper <br><br> Job Id :100194042<br><br>Hire Resume Writers<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>16/8/2026<br><br>Fahaheel - AL DARWAZA GENERAL TRADING COMPANY<br><br>Candidates Only from Inside Kuwait ( Local requirement )<br><br>Transportation available from Fahaheel, Mangaf, Mahaboullah.<br><br>GI Cable tray fabricator ( Must be need experienced candidates ) = 300 KD<br><br>Fabricator structure ( Must be need very well drowning knowledge) = 325 KD ( 8 hours 26 days )<br><br>Fitter ( Must be knowledge of Gas cutting & fittings) = 260 KD<br><br>Helper. = 200 KD<br><br>Grinder. = 200 KD<br><br>Tack welder + Grinder = 220 KD<br><br>Mig welder ( Co2 ) = 305 KD<br><br>Rigger ( over head operator crane ) = 240 KD<br><br>Sand Blaster = 270 KD<br><br>Spray Painter ( Airless ) = 280 KD<br><br>( faheel, Mangaf & Mahabulla only these areas Candidates call me )<br><br>Contact : 97961420 , *<br><br>Book Walking Tours<br><br>Basic Details<br><br>Location : Fahaheel , Kuwait<br><br>Qualification<br><br>Posted : 24 days ago<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : +965 97961420<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : Not-Mentioned

Urgent Requirements<br><br> Helper <br><br> Job Id :100193948<br><br>Hire Resume Writers<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>14/8/2026<br><br>Fahaheel - AL DARWAZA GENERAL TRADING COMPANY<br><br>Candidates Only from Inside Kuwait ( Local requirement )<br><br>Transportation available from Fahaheel, Mangaf, Mahaboullah.<br><br>GI Cable tray fabricator ( Must be need experienced candidates ) = 300 KD<br><br>Fabricator structure ( Must be need very well drowning knowledge) = 325 KD ( 8 hours 26 days )<br><br>Fitter ( Must be knowledge of Gas cutting & fittings) = 260 KD<br><br>Helper. = 200 KD<br><br>Grinder. = 200 KD<br><br>Tack welder + Grinder = 220 KD<br><br>Mig welder ( Co2 ) = 305 KD<br><br>Rigger ( over head operator crane ) = 240 KD<br><br>Sand Blaster = 270 KD<br><br>Spray Painter ( Airless ) = 280 KD<br><br>( faheel, Mangaf & Mahabulla only these areas Candidates call me )<br><br>Contact : 97961420* , ***<br><br>Download Interactive Maps<br><br>Basic Details<br><br>Location : Fahaheel , Kuwait<br><br>Qualification<br><br>Posted : 25 days ago<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : +965 97961420<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : Not-Mentioned

<p>Protection Maintenance Engineer</p><p>&nbsp;</p><p>Qualification</p><p>Bachelor Degree in Electrical Engineering according to Kuwait Bachelor Standard. Atleast 4 Years</p><p>10 Years of Minimum Experience</p><p>&nbsp;</p><p>Key Responsibilities</p><p>* Experience in maintenance of protective equipment’s involved in EHV, HV and LV substations.</p><p>* He should have theoretical and practical know how of all types of protection relays including distance protection relays in the substations including testing.</p><p>* He should be able to test and maintain battery charger and electronic circuit.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Experience in Maintenance of protective equipments involved in EHV, HV and LV substations. He should have theoretical and practical knows how of all types of protection relays including Bus Bar protection relays. He should be able to test and maintain battery charger and electronic circuit in the Substation. He should be able to use all types of test kits and well versed in drawing and testing of protection relays.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>BE / B Tech in Electrical Engineering</p><p></p></section>

Job description:<br><br> What you will be doing Understand the project requirements, scope of work, project delivery schedule, project deliverables, etc. Develop a thorough understanding of client design requirements prior to the commencement of designproject. Coordinate with the Lead / Senior ELV Engineer for further clarifications on design requirements. Share the heat dissipation calculation with the Lead/Senior ELV Engineer. Revise the report based on client’s comments (if required). Share the electrical load requirements with the Lead/Senior ELV Engineer. Review data collection drawings / documents about the existing utilities around the project. Respond to site RFIs related to design. Review the drawings prepared by the modelers and ensure that all the client’s and authorities’requirements are respected. Also ensure that all the contractual obligations are followed. Maintain continuous quality control on all drawings produced under the section, ensuring that they adhereto PACE quality and CAD standards (e.g., high standards of visual presentation, error free, properlydimensioned, x-referenced etc.) Ensure that ELV Model is shared every Thursday as per Pace protocol with all the discipline working on theproject for coordination. Coordinate the major space requirements for the ELV services such as but not limited to MOC Room, Main Server Room, Security Control Room, IDF rooms, etc. with the project Architects. Assist in conducing site surveys (as and when required) to investigate the layout of existing ELV systemsprior to design. Assist on site ELV engineers by responding to technical queries which they raise. Attend project coordination workshops, and site visits during the project design and implement theoutcome of the same in the design. Based on the approved concept design, prepare the scheme for the ELV services for the project. Brief the same to the ELV Modelers and guide them for modelling the ELV services for the project. Based on the received information’s prepare the design and layout plans for ELV systems. Coordinate with HVAC Engineer for smoke zones used in the project and ensure that the Fire Alarm Zoneare in line with the smoke zones. Coordinate with team members effectively to ensure that all projects progress as planned in order not tocause project delays or budget over runs. Coordinate with the Architects and receive the area schedules and other project information. Ensure all the project deliverables are fulfilled during the different project submission stages. Prepare calculations and electrical load requirement for the ELV Systems. Prepare concept narrative report. Coordinate with Architects for the ELV services space requirements in the project. Assist site staff in verifying sample materials submitted by contractors (as and when required) to ensurecompliance against ministerial requirements and specifications. Attend site visit as required. Required Experience 5+ years Experience in designing ELV Systems. Awareness of Local and International Guidelines/ Codes/ Regulations for ELV Systems. Knowledge of Local and International codes such as KFF (local civil defence), GCC codes & regulations and NFPA. Knowledge of building managment system design Full knowledge of preparation of technical specification for ELV systems. Basic Knowledge in Auto CAD and Revit. Previous experience in value engineering study to ELV systems. Experience in handling multiple projects simultaneously in a similar environment. Working knowledge of MS Office. Cad, Revit software. Possess regional experience in design of ELV system. Previous experience shall include design of ELV system for Mega Projects of different categories such as Mixed Use Development, Educational buildings, Health Care, Hotel, Sport Facilities, Neighbourhoods, High Rise buildings, etc. Shall be capable of providing project presentations to client and authorities. Education Bachelor's degree in Electrical Engineering or equivalent. Professional certification or relevant ELV certifications will be an advantage. Certifications & Memberships Kuwait Society of Engineers (KSE) Membership or Any local Engineer's society membership (for hiring outside Kuwait). Any Certifications related to ELV systems. Training or course certificates from ELV Manufacturers. Essential Skills Experience of managing teams efficiently in a similar environment and on multiple projects. Proven record of interpersonal skills such as client interaction, he must be a strong team player skill and shall haveability to work pleasantly with a diverse work force. Track record in multitasking and shall have proven decision making ability. Good Internal and external communication skill such as ability to handle internal project coordination meeting with alldisciplines, dealing with authorities, presentation to clients, etc. Proven track record of the ability to express innovative ideas. Demonstrated experience in excellent communication skills both verbal and written. Demonstrated problem solving skills in previous roles and projects. Project Management experience. <br><br>Profile description:<br><br> About the Role Designing ELV Systems for various projects, and handle projects from the irinitiation to closure, and shall ensure adherence to the project deadlines and quality requirements in order to fulfill clientrequirements. Extra Low Voltage Engineers are responsible for ensuring that the Structured Cabling System, Converged Network System, Security System, Fire Alarm and Voice Evacuation System, IPTV and Digital Signage System, AV PA Systemetc. design of the project is in line with all the relevant authorities’ requirements and satisfying the contractual obligations.

<ol><li><p>Fabricate Corian and solid-surface products according to approved drawings and measurements.</p></li><li><p>Cut, route, shape, bond, and assemble solid-surface materials.</p></li><li><p>Create <strong>seamless and professionally finished joints</strong>.</p></li><li><p>Sand, polish, and finish surfaces to the required quality standard.</p></li><li><p>Repair cracks, chips, scratches, and other surface defects.</p></li><li><p>Read and follow shop drawings, templates, and production specifications.</p></li><li><p>Take accurate measurements and prepare templates for custom fabrication.</p></li><li><p>Operate and maintain fabrication tools and equipment safely.</p></li><li><p>Inspect finished products for dimensions, surface quality, edges, and joint visibility.</p></li><li><p>Identify and resolve fabrication or installation problems.</p></li><li><p>Perform installation and adjustments at the site when required.</p></li><li><p>Maintain a clean, organized, and safe work area.</p></li><li><p>Report material defects, technical issues, or production problems to the supervisor.</p></li><li><p>Follow company quality, safety, and production procedures.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ol><li><p><strong>Minimum 4 years of hands-on experience</strong> in Corian, solid-surface, or similar material fabrication.</p></li><li><p>Proven experience in <strong>cutting, routing, bonding, jointing, sanding, and polishing</strong> solid-surface materials.</p></li><li><p>Strong experience in <strong>seamless jointing and surface finishing</strong>.</p></li><li><p>Experience repairing <strong>cracks, chips, scratches, and damaged surfaces</strong>.</p></li><li><p>Ability to <strong>read shop drawings, measurements, and templates</strong>.</p></li><li><p>Experience fabricating <strong>countertops, vanities, sinks, wall panels, or custom solid-surface products</strong>.</p></li><li><p>Ability to use <strong>routers, saws, sanders, drills, clamps, and related fabrication tools</strong>.</p></li><li><p>Ability to take accurate measurements and prepare <strong>physical or digital templates</strong>.</p></li><li><p>Basic knowledge of <strong>tool maintenance and dust-extraction systems</strong>.</p></li><li><p>Good understanding of <strong>quality control and workshop safety procedures</strong>.</p></li><li><p><strong>Technical/Vocational Certificate</strong> in carpentry, joinery, interior fit-out, or a related field is preferred.</p></li><li><p>Strong <strong>hands-on skills, attention to detail, and problem-solving ability</strong>.</p></li><li><p>Experience with <strong>site installation and adjustment</strong> is an advantage.</p></li></ol>