فنى كابلات منخفض الفولت في الكويت

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Job Purpose:</b></p><ol><li>To ensure the successful execution of low voltage and ICT projects with strict adherence to QA/QC standards, while providing presales technical support and managing site activities to deliver projects on time and within budget.</li></ol><p><b>Key Responsibilities:</b></p><ul><li>Prepare and review <b>technical &amp; commercial proposals</b> for tenders and company projects.</li><li>Manage <b>QA/QC activities</b>, including preparation and review of SAT, FAT, ITP, NCR, and punch list closure.</li><li>Supervise installation, testing, and commissioning of low voltage systems such as:</li><li>CCTV</li><li>Access Control Systems</li><li>Gate Barrier &amp; Parking Management Systems</li><li>Public Address &amp; Voice Evacuation Systems</li><li>Audio Visual Systems</li><li>BMS (Johnson Controls, Siemens, Honeywell)</li><li>Coordinate with vendors and subcontractors to ensure compliance with project specifications.</li><li>Attend clarification meetings with clients and follow up on approvals.</li><li>Prepare site reports, monitor progress, and ensure compliance with health and safety standards.</li><li>Manage <b>handover documentation</b> and ensure smooth project delivery.</li><li>Stay updated with market requirements and general specifications.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Personal Skills:</b></p><ul><li>Strong communication and client-facing skills.</li><li>Ability to lead site teams and coordinate with multiple stakeholders.</li><li>Analytical thinking and problem-solving abilities.</li><li>High attention to detail and commitment to quality.</li><li>Ability to work under pressure and meet deadlines.</li></ul><p><br></p></div>

<p>Perform installation, maintenance and repair of telecommunications systems. Leverage an intermediate level of experience to perform inside/outside cable plant work.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High School Diploma/GED Required</li><li>3 - 5 years of related experience Required</li><li>Certification: Security+ CE</li><li>Installation of ducts and conduits, pulling cables, and terminating, testing, splicing, and repairing interior and outside copper, coaxial, and fiber optic cabling</li><li>Installation of fiber optic modems, fiber multiplex equipment, fiber patch panels, analog and digital copper patch panels, main and intermediate distribution frames,</li><li>Installation of lightning protection and supporting ground and power connections</li><li>Installation of cabinets, cable ladder and rack systems, and equipment components in the cabinets</li><li>Security Clearance Level: SECRET</li><li>Experience with the operation of heavy equipment as specified in the task order to include: track excavator-changeable scoop/hydraulic jackhammer, standard backhoe, bobcat, cable reel truck, and 20K all- terrain forklift</li><li>Location: On Customer Site</li><li>US Citizenship Required</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Summary: To efficiently perform installation &amp; commissioning of electrical installations within KDD in accordance with KDD as well as international standards and norms. Key Accountabilities: Ensure efficient execution of electrical installation, commissioning, testing, and validation activities in compliance with KDD and international standards. Deliver high-quality installation of electrical systems including LV/HV systems, control panels, fire alarm, network, and control wiring within project timelines. Maintain a safe, clean, and compliant working environment in accordance with HSE regulations of KDD and the State of Kuwait. Ensure accuracy and reliability in cable termination, tray installation, field wiring, and panel assembly activities. Support smooth project execution through effective coordination with project teams and other technical disciplines. Ensure all assigned tasks are completed as per management instructions and operational requirements. Roles &amp; Responsibilities: Perform electrical installation, commissioning, testing, and validation of control panels and electrical systems. Carry out cable tray installation, cable routing, termination, and field wiring for LV, HV, fire alarm (FA), network, and control systems. Assemble, install, and assist in commissioning electrical and control panel boards as per project specifications. Read and interpret electrical drawings, schematics, and technical documentation for proper execution of work. Maintain tools, equipment, and work areas in a safe and organized condition. Coordinate with engineers, supervisors, and other technicians to ensure timely completion of project activities. Adhere strictly to HSE policies, safety procedures, and quality standards at all times. Provide technical support to team members and assist in resolving site-related electrical issues when required. Follow all management instructions and support operational requirements as needed.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education Diploma / ITI in Electrical domain. Professional experience (years) 15+. Professional background Basic knowledge of MS office programs-Proficient Knowledge of HV, LV, FA &amp; Control Systems Installation &amp; Testing.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Source electrical equipment including emergency diesel generators, MV/LV transformers, MV switchgear and modifications woks, package substations, UPS systems, explosion-proof distribution boards, lighting fixtures, poles, local control stations, MOV isolating switches, HV/LV power/control cables, cable glands, earthing materials, and cable trays. Procure instrumentation/telecom equipment including control systems (PCS, ESD, FGS), telecom systems, motor-operated valves, ESD valves, pressure/temperature/level transmitters, Coriolis flowmeters, gauges, F&amp;G devices, auto sampling systems, I&amp;C cables, fiber optic cables, junction boxes, cable trays, glands, and tubes/fittings. Ensure compliance with electrical standards. Ensure compliance with instrumentation/telecom standards. Negotiate with suppliers the cost-effective electrical equipment. Negotiate with suppliers the cost-effective instrumentation / telecom / F&amp;G equipment. Collaborate with engineering teams for material compliance. Collaborate with engineering teams for material compliance. Close coordination with Post order team (Expediting Team) for Vendor deliverables Close coordination with Post order team (Expediting Team) for Vendor deliverables. Negotiate with suppliers for high-precision equipment.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>BSc in Electrical Instrumentation, or Telecom Engineering . Preference for graduates from recognized accredited universities or institutions in automation/control programs Knowledge of electrical systems (e.g., transformers, switchgear), of instrumentation/control systems, telecom equipment, and procurement, and safety standards. Oil &amp; gas I&amp;C experience, UAE/Kuwait standards.gas electrical systems experience, UAE/Kuwait standards. Enhances SCM team with electrical and I &amp; C expertise. 3 5 years of design and engineering experience in electrical systems as well as instrumentation and control prior to procurement role. Procurement experience in oil &amp; gas and marine projects.</p><p></p></section>

<p>Company : Leading company in Kuwait</p><p>Position : Electrical Design Engineer</p><p>Qualification : B.E/B.Tech in Electrical Engineering</p><p>Location : Kuwait</p><p>Salary : 600 - 700 KWD</p><p>Experience : Min 5 years</p><p>Company provides : Free Food, Accommodation &amp; local transportation</p><p>Interview mode : Online Interview</p><p>Job Description: Substation Design (Up to 400 kV), Review and develop, Single Line Diagrams (SLD), Protection schemes, Equipment layouts Coordinate GIS / AIS design requirements Ensure compliance with IEC and utility standards underground Cable Systems Design and review HV/EHV cable systems (up to 400 kV) Evaluate: Cable sizing, routing, and installation methods, Jointing and termination requirements Support technical submissions and approvals Overhead Transmission Lines Review and support design of OHL systems up to 400 kV</p><p><strong>Desired Candidate Profile</strong></p><p>Qualification : B.E/B.Tech in Electrical Engineering</p><p>Experience : Min 5 years</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p>Archirodon, having earned its reputation as a reliable and respected international contractor for more than a half century in the Engineering, Procurement and Construction (EPC) market, continues to create value to its stakeholders by executing complex EPC projects worldwide, in recognition of its superior standards of performance. &nbsp;</p><br><p>We are constantly growing and are currently looking for a full of potential and reliable <strong>Electrical Procurement Engineer (I &amp; C)</strong>&nbsp;to join our top qualified and knowledgeable team in one of our projects in Kuwait and electrical equipment and systems for project reliability and compliance, ensuring&nbsp;compatibility of electrical systems in hazardous environments.</p><br><br>Job Description<br><ul><li>Source electrical equipment including emergency diesel generators, MV/LV transformers, MV switchgear and modifications woks, package substations, UPS systems, explosion-proof distribution boards, lighting fixtures, poles, local control stations, MOV isolating switches, HV/LV power/control cables, cable glands, earthing materials, and cable trays.</li><li>Procure instrumentation/telecom equipment including control systems (PCS, ESD, FGS), telecom systems, motor-operated valves, ESD valves, pressure/temperature/level transmitters, Coriolis flowmeters, gauges, F&amp;G devices, auto sampling systems, I&amp;C cables, fiber optic cables, junction boxes, cable trays, glands, and tubes/fittings.</li><li>Ensure compliance with electrical standards.</li><li>Ensure compliance with instrumentation/telecom standards.</li><li>Negotiate with suppliers the cost-effective electrical equipment.</li><li>Negotiate with suppliers the cost-effective instrumentation / telecom / F&amp;G equipment.</li><li>Collaborate with engineering teams for material compliance.</li><li>Collaborate with engineering teams for material compliance.</li><li>Close coordination with Post order team (Expediting Team) for Vendor deliverables</li><li>Close coordination with Post order team (Expediting Team) for Vendor deliverables.</li><li>Negotiate with suppliers for high-precision equipment.</li></ul><br>Qualifications<br><ul><li><strong>BSc in Electrical &nbsp;</strong><strong>Instrumentation, or Telecom Engineering</strong>.<br> Preference for graduates from recognized accredited universities or institutions in automation/control programs</li><li>Knowledge of electrical systems (e.g., transformers, switchgear),&nbsp;of instrumentation/control systems, telecom equipment, and procurement, and safety standards.</li><li>Oil &amp; gas I&amp;C experience, UAE/Kuwait standards.gas electrical systems experience, UAE/Kuwait standards.</li><li>&nbsp;Enhances SCM team with electrical and I &amp; C expertise.</li><li>3–5 years of design and engineering experience in electrical systems as well as instrumentation and control prior to procurement role.</li><li>Procurement experience in oil &amp; gas and marine projects.</li></ul><br>Additional Information<br><p>You are someone who:</p><br><ul><li>Demonstrates strong analytical, detail-oriented, strong negotiation skills.</li><li>Has a result-driven and decisive personality</li><li>Demonstrates&nbsp;attention to detail</li><li>Enjoys challenge, working with different cultures and travelling</li></ul><p><u><strong>What's in it for you:</strong></u><br> Expat package is on the shelf, yet the real joy comes from being a member of smart and passionate teams, within an international leading EPC Group on a mission that matters. We create mega construction projects - literally around the globe - with meaningful impact on the local communities for the years to come. At Archirodon, you will find a proud, productive and human-centric culture, caring for and building on our people and their development!</p><br><p><em>Please note that you will be contacted only in case you are shortlisted for an interview. In the meantime, do not hesitate to stay in touch and keep monitoring our open vacancies and our LinkedIn page! Depending on the nature of the position and its associated compliance risk level, a background check on your profile may be carried out.</em></p><br><p><em>Rest assured that your application will be treated with strict confidentiality and under all applicable data privacy regulations.</em></p><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>System Support</strong></p><ul><li><p>MS-Windows Server and Client OS installation and basic configurations.</p></li><li><p>System Image Deployment and collecting.</p></li><li><p>System Updates Deployment and releases execution.</p></li><li><p>MS-SQL installation and basic configurations.</p></li><li><p>Custom Application support (Troubleshoot , diagnose and logs collection).</p></li><li><p>Troubleshoot, diagnose, and resolve application, user, and system issues in a timely and effective manner.</p></li><li><p>Ensure high performance and availability of Systems.</p></li><li><p>Hardware installation, support, and troubleshooting Workstations PC , Desktop printer, and Kiosks machines.</p></li></ul><br><br><p><strong>Cable Installation &amp; Laying</strong></p><ul><li><p>Install, route, and lay structured cabling systems including CAT5e, CAT6, CAT7, and serial cables (RS232 &amp; RS485)</p></li><li><p>Ensure cables are properly organized, labelled, and managed in compliance industry standards</p></li><li><p>Terminate copper cables at patch panels, wall outlets, and equipment</p></li><li><p>Perform cable splicing, crimping, and connector installation to required standards</p></li><li><p>Conduct cable testing using appropriate tools to verify signal integrity and performance</p></li><li><p>Identify, troubleshoot, and rectify faults or failures in cabling infrastructure</p></li><li><p>Support the configuration and verification of basic connectivity across sites</p></li><li><p>Adhere to health, safety, and quality standards during all installation activities</p></li></ul><br><p><strong>Others</strong></p><ul><li><p>Perform basic electrical measurements including voltage, current, resistance, and power readings using standard instruments (multi-meters, clamp meters, etc.).</p></li><li><p>Carry out installation, configuration and termination of uninterruptible power supply (UPS) systems and connected electric cables.</p></li><li><p>Carry out site surveys and assessments prior to installation works.</p></li><li><p>Coordinate team members to meet the timelin<strong>e.</strong></p></li></ul><br><br><br><p><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Experience:</strong></p><ul><li><p>Minimum 2 years of experience in IT support or a closely related technical role.</p></li></ul><br><br><p><strong>OTHER REQUIREMENTS</strong></p><ul><li><p>Valid Kuwait Residence Permit.</p></li><li><p>Valid Kuwait Driving License and personal vehicle.</p></li><li><p>IT graduation (bachelor’s l<strong>evel)</strong></p></li></ul><br><br><p><strong>ADDITIONAL CONSIDERATIONS</strong></p><ul><li><p>Willingness to travel to physical sites across the network as operational needs arise.</p></li><li><p>Availability to participate in an on-call rotation to provide after-hours support when necessary</p></li></ul><p></p></section>

<p>About the Role: We are seeking a competent Site Engineer specializing in civil pipeline works for marine GRP (Glass Reinforced Plastic) pipe installations. The ideal candidate will be responsible for supervising the installation, testing, and commissioning of GRP pipelines in marine and offshore environments, ensuring compliance with project specifications, international standards, and safety requirements. Key Responsibilities: • Supervise and coordinate daily pipeline installation activities including trenching, pipe laying, jointing, lamination, and backfilling for marine GRP pipelines • Ensure all GRP pipe installation works comply with approved drawings, method statements, specifications, and international standards (ISO 14692, AWWA M45) • Monitor trench excavation, dewatering, pipe bedding, and backfilling operations in accordance with project requirements • Supervise GRP pipe jointing and lamination procedures including adhesive bonding, coupling installation, and flange bolting • Coordinate with survey teams for pipeline route alignment, setting out, and as-built verification • Conduct site inspections and quality checks to verify adherence to specifications, safety regulations, and environmental standards • Review and interpret isometric drawings, spool drawings, and pipeline alignment sheets • Prepare and submit inspection requests (RFIs), method statements, and risk assessments • Monitor material deliveries including GRP pipes, fittings, couplings, and consumables; ensure proper handling and storage • Liaise with clients, consultants, subcontractors, and QAQC teams for inspections and approvals • Maintain accurate daily records including progress reports, manpower, equipment usage, and material consumption • Enforce HSE protocols including permits, toolbox talks, PPE compliance, and emergency procedures • Assist in pre-commissioning and commissioning activities including hydrotesting, flushing, and pressure testing • Prepare test packs and maintain documentation for pipeline testing and handover • Report delays, technical issues, or incidents to the Project Manager or Construction Manager • Provide technical guidance to site supervisors, foremen, and pipeline installation crews</p><p>Qualifications & Experience: Bachelor's degree in Civil Engineering, Mechanical Engineering, or related field Minimum 5+ years of experience in pipeline installation, with specific experience in GRP/FRP piping for marine or offshore projects Strong knowledge of GRP pipe materials, jointing methods (adhesive bonded, coupling), and lamination procedures Familiarity with international standards including ISO 14692 (GRP piping for offshore applications) and AWWA M45 • Experience with marine pipeline installation methods including trenching, floating installation, or underwater pull-in • Proficiency in MS Office, AutoCAD, and project management software • Knowledge of hydrotesting, pressure testing, and pipeline commissioning procedures • Valid safety certifications (NEBOSH, IOSH, OSHA) preferred • Offshore survival certificates (BOSIET/HUET) if required • Fluency in English; Arabic or Hindi/Urdu is a plus Required Skills: • Strong technical knowledge of GRP pipeline installation in marine environments • Excellent supervision and coordination abilities • Attention to detail for quality and compliance • Good communication and report writing skills • Problem-solving for site and technical issues • Ability to work under pressure and meet project deadlines • Team collaboration with site staff, subcontractors, and management</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Detailed Engineering of Electrical Substations including Design/ Layout of Substation Building &amp; Equipment, Floor Opening, Earthing, Cable Trays, SLD, Lighting &amp; Small Power System etc. Vendor drawing reviews of 400kV GIS, 132kV GIS, 300MVA, 400/132/33kV Power Transformer, Shunt Reactor, Fire Fighting system, Cables etc. Calculation for cables, Earthing, Lightning, Lighting, Cable Tray, DC UPS &amp; Heat Load Calculation etc. (Oil &amp; Gas and substations) Knowledge in Scheme review &amp; Power and control cable schedule. Experience in tender estimation. Experience in using ETAP software, AutoCAD &amp; DIALLUX Coordination with site team. Relay Setting Calculation.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>BE / B Tech in Electrical Engineer with minimum 5 years of exp. Experience in 400kV/300kV/132kV Substation Design &amp; Packaged Type Substation Design.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Work includes GI conduit installation, panel termination, cable tray, wiring, calibration, loop checking, troubleshooting. Oil &amp; Gas/EPC project. Salary negotiable. Apply: EMAIL_ADDRESS</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h3>Required Candidate profile</h3><p>ITI/Diploma in Instrumentation/E&amp;I with 3 10 yrs experience in Oil &amp; Gas/EPC projects. Skilled in GI conduit, panel termination, cable tray, loop checking, calibration,troubleshooting, reading drawing</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible for operating and maintaining power generation and aircraft arresting systems in accordance with the performance work statement. Operation and maintenance services inlude, but are not limited to: catapults, arresting gear, and associated mechanical, hydraulic, and control systems involved primarily in aircraft takeoff and landing operations. Duties include installing and maintaining visual landing aids; testing and maintaining launch and recovery equipment using electric and mechanical test equipment and hand tools; activating airfield arresting systems, such as crash barriers and cables, during emergency landing situations; directing aircraft launch and recovery operations using hand or light signals; and maintaining logs of airplane launches, recoveries, and equipment maintenance. Provide operation, maintenance, inspection, and repair of power generation systems and equipment such as diesel generators and light carts.</p><p><strong>Major Responsibilities:</strong> Installs, removes, and operates electrical power generating and control systems, automatic transfer switches, aircraft arresting systems, and associated equipment. Checks equipment for serviceability. Positions equipment such as gasoline and diesel engines, generators, switchgears, air compressors, and other power generating auxiliary equipment. Installs, positions, rewinds, and pretensions aircraft arresting systems. Certifies aircraft arresting systems as required. Checks installed equipment to ensure compliance with publications, policies, and directives. Inspects, tests, and services component systems such as safety, fuel, lubrication, cooling, air pressure, pumps, regulators, governors, and accessory equipment. Observes and interprets instruments such as ammeters, voltmeters, frequency meters, synchro scopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges. Adjusts engine generator systems to maintain proper voltage, current frequency, and synchronization. Synchronizes multiple generators. Operates high and low voltage switches, circuit breakers, rheostats, and other controls on switchgear and distribution panels. Performs electrical power control and distribution functions. Maintains, modifies, and repairs electrical power generating and control systems, automatic transfer switches, aircraft arresting systems, and associated equipment. Performs inspections and interprets findings to determine corrective action. Identifies and records engine and generator malfunctions. Uses precision test equipment, troubleshoots malfunctions, and inspects parts for excessive wear and other conditions. Removes, repairs, and replaces defective power generating equipment components. Performs corrosion control. Inspects and replaces gauges and meters. Maintains aircraft arresting systems, including electrical, hydraulic, rewind, and pneumatic systems, and other electronic components. Bench checks components and subassemblies. Tests and calibrates repaired items. Reviews performance data and maintenance records to determine adequacy of maintenance. Interprets data related to electrical power generating and aircraft arresting systems to ensure overall mission success. Maintains records. Posts entries on operation, inspection, and maintenance records. Records meter readings, wear and alignment measurements, fuel consumption, and other data in performance logs. Furnishes information for reports and recommends changes to correct defective equipment or improve operating procedures. Complies with environmental policies. Ensure all work areas and equipment are kept clean, orderly and in a safe manner. Performs quality and safety self-inspections. Responsible for proper utilization and safeguarding of all government and contractor provided property (e.g., to include government facilities, equipment and tools). Perform other duties as assigned in accordance with contractual, functional, and mission requirements.</p><p><strong>Other Requirements:</strong> Work will be outdoors and indoors. Work in extreme outside temperatures reaching 115 degrees and winds reaching 30mph may be required. Exposure to cold, dust, noise, and chemicals may occur. Overtime and shift work may be required depending on contractual needs. Employee must comply with all Federal, State and Local regulations and published Company work rules as well as written instructions. Task specific work environment training will be provided as required. Must be prepared to function in a wartime environment to support U. S. interests. 100% Overseas Assignment.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>One year related experience may be substituted for one year of education, if degree is required.</li><li>Prior military service of AFSC 3E072, Power Production Journeyman</li><li>Must be MAAS/BAK-12 Factory Trained &amp; Certified</li><li>High school diploma or equivalent.</li><li>Must be a U.S. Citizen with a current, valid U. S. Passport and Driver s License (able to drive manual transmission).</li><li>Must have and maintain a valid U. S. SECRET Security Clearance prior to deployment.</li><li>Must have the capability of obtaining an Air Force flight line driver s license.</li><li>Must be able to pass a flight line access test and obtain flight line access badge.</li><li>Must be able to pass employment and deployment qualification requirements that include psychological, medical, dental, drug testing, background checks, etc.</li><li>Candidates must successfully complete both online and hands on CBRN (chemical, biological, radiological and nuclear) defense training. Training includes the successful fit testing of DOD provided protective gear.</li><li>Must have four years of experience in operation and maintenance of BAK-12 aircraft arresting systems and completed factory training on Mobile Aircraft Arresting Systems (MAAS)/BAK-12.</li><li>Shall have knowledge of principles of electronics and electricity including generation, conversion, transformation, distribution and utilization.</li><li>Must have three years of experience operating and maintaining prime power spot generators and backup generators.</li><li>Must be capable of giving and receiving instructions.</li><li>Must be fluent reading and speaking English.</li><li>Able and willing to work periods of long hours to meet mission requirements.</li><li>Military experience in a contingency environment and knowledge and experience working with government contracts preferred.</li></ul><p></p></section>

<p>Familiar with and knowledgeable in Permit to Work (PTW) systems applicable to Oil &amp; Gas operations. Responsible for overseeing and executing all field instrumentation activities (Fire Alarm, Gas Detection, and Fire Suppression Systems and Load shifting), including installation, testing, pre-commissioning, and commissioning during the construction phase. Verify that all activities are carried out in compliance with IFC drawings, approved method statements, and Inspection Test Plans (ITPs). Supervise instrumentation works such as cable pulling, cable termination, tubing installation, junction box installation, and panel wiring activities. Coordinate and assign daily work activities to subcontractors and submit daily progress reports to the Engineer. Ensure the safe installation, testing, and commissioning of instrumentation and control systems, including field devices, control panels, junction boxes, and cabling, in accordance with approved drawings and project specifications. Ensure proper segregation and routing of signal, control, and power cables during installation. Witness and support functional testing, loop checking, and pre-commissioning activities in coordination with QA/QC and commissioning teams. Assist in the preparation, tracking, and closure of punch list items arising from inspections, pre-commissioning, and commissioning activities. Maintain red-line mark-up drawings and support the design team during as-built documentation, loop folders, and handover dossiers. Coordinate closely with electrical, mechanical, and process disciplines to ensure smooth execution of multidisciplinary activities. Work in collaboration with the commissioning team to plan and execute system energization and loop testing activities. Ability to Supervise the load shifting of DCS, ESD. Liaise with client representatives to facilitate inspections, obtain approvals, and provide progress updates.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul><li><span>Familiar with and knowledgeable in Permit to Work (PTW) systems applicable to Oil &amp; Gas operations.</span></li><li><span>Responsible for overseeing and executing all field instrumentation activities (Fire Alarm, Gas Detection, and Fire Suppression Systems and Load shifting), including installation, testing, pre-commissioning, and commissioning during the construction phase.</span></li><li><span>Verify that all activities are carried out in compliance with IFC drawings, approved method statements, and Inspection Test Plans (ITPs).</span></li><li><span>Supervise instrumentation works such as cable pulling, cable termination, tubing installation, junction box installation, and panel wiring activities.</span></li><li><span>Coordinate and assign daily work activities to subcontractors and submit daily progress reports to the Engineer.</span></li><li><span>Ensure the safe installation, testing, and commissioning of instrumentation and control systems, including field devices, control panels, junction boxes, and cabling, in accordance with approved drawings and project specifications.</span></li><li><span>Ensure proper segregation and routing of signal, control, and power cables during installation.</span></li><li><span>Witness and support functional testing, loop checking, and pre-commissioning activities in coordination with QA/QC and commissioning teams.</span></li><li><span>Assist in the preparation, tracking, and closure of punch list items arising from inspections, pre-commissioning, and commissioning activities.</span></li><li><span>Maintain red-line mark-up drawings and support the design team during as-built documentation, loop folders, and handover dossiers.</span></li><li><span>Coordinate closely with electrical, mechanical, and process disciplines to ensure smooth execution of multidisciplinary activities.</span></li><li><span>Work in collaboration with the commissioning team to plan and execute system energization and loop testing activities.</span></li><li><span>Ability to Supervise the load shifting of DCS, ESD.</span></li><li><span>Liaise with client representatives to facilitate inspections, obtain approvals, and provide progress updates.&nbsp;</span></li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsible for operating and maintaining power generation and aircraft arresting systems in accordance with the performance work statement. Operation and maintenance services inlude, but are not limited to: catapults, arresting gear, and associated mechanical, hydraulic, and control systems involved primarily in aircraft takeoff and landing operations. Duties include installing and maintaining visual landing aids; testing and maintaining launch and recovery equipment using electric and mechanical test equipment and hand tools; activating airfield arresting systems, such as crash barriers and cables, during emergency landing situations; directing aircraft launch and recovery operations using hand or light signals; and maintaining logs of airplane launches, recoveries, and equipment maintenance. Provide operation, maintenance, inspection, and repair of power generation systems and equipment such as diesel generators and light carts. Responsibilities Major Responsibilities: + Installs, removes, and operates electrical power generating and control systems, automatic transfer switches, aircraft arresting systems, and associated equipment. Checks equipment for serviceability. Positions equipment such as gasoline and diesel engines, generators, switchgears, air compressors, and other power generating auxiliary equipment. Installs, positions, rewinds, and pretensions aircraft arresting systems. Certifies aircraft arresting systems as required. Checks installed equipment to ensure compliance with publications, policies, and directives. Inspects, tests, and services component systems such as safety, fuel, lubrication, cooling, air pressure, pumps, regulators, governors, and accessory equipment. Observes and interprets instruments such as ammeters, voltmeters, frequency meters, synchro scopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges. Adjusts engine generator systems to maintain proper voltage, current frequency, and synchronization. Synchronizes multiple generators. Operates high and low voltage switches, circuit breakers, rheostats, and other controls on switchgear and distribution panels. Performs electrical power control and distribution functions. + Maintains, modifies, and repairs electrical power generating and control systems, automatic transfer switches, aircraft arresting systems, and associated equipment. Performs inspections and interprets findings to determine corrective action. Identifies and records engine and generator malfunctions. Uses precision test equipment, troubleshoots malfunctions, and inspects parts for excessive wear and other conditions. Removes, repairs, and replaces defective power generating equipment components. Performs corrosion control. Inspects and replaces gauges and meters. Maintains aircraft arresting systems, including electrical, hydraulic, rewind, and pneumatic systems, and other electronic components. Bench checks components and subassemblies. Tests and calibrates repaired items. Reviews performance data and maintenance records to determine adequacy of maintenance. Interprets data related to electrical power generating and aircraft arresting systems to ensure overall mission success. + Maintains records. Posts entries on operation, inspection, and maintenance records. Records meter readings, wear and alignment measurements, fuel consumption, and other data in performance logs. Furnishes information for reports and recommends changes to correct defective equipment or improve operating procedures. Complies with environmental policies. + Ensure all work areas and equipment are kept clean, orderly and in a safe manner. + Performs quality and safety self-inspections. + Responsible for proper utilization and safeguarding of all government and contractor provided property (e.g., to include government facilities, equipment and tools). + Perform other duties as assigned in accordance with contractual, functional, and mission requirements. Other Requirements: + Work will be outdoors and indoors. + Work in extreme outside temperatures reaching 115 degrees and winds reaching 30mph may be required. + Exposure to cold, dust, noise, and chemicals may occur. + Overtime and shift work may be required depending on contractual needs. + Employee must comply with all Federal, State and Local regulations and published Company work rules as well as written instructions. + Task specific work environment training will be provided as required. + Must be prepared to function in a wartime environment to support U. S. interests. + 100% Overseas Assignment. Qualifications Minimum Qualifications: Education/Certifications : One year related experience may be substituted for one year of education, if degree is required. + Prior military service of AFSC 3E072, Power Production Journeyman + Must be MAAS/BAK-12 Factory Trained &amp; Certified + High school diploma or equivalent. + Must be a U.S. Citizen with a current, valid U. S. Passport and Driver’s License (able to drive manual transmission). + Must have and maintain a valid U. S. SECRET Security Clearance prior to deployment. + Must have the capability of obtaining an Air Force flight line driver’s license. + Must be able to pass a flight line access test and obtain flight line access badge. + Must be able to pass employment and deployment qualification requirements that include psychological, medical, dental, drug testing, background checks, etc. + Candidates must successfully complete both online and hands on CBRN (chemical, biological, radiological and nuclear) defense training. Training includes the successful fit testing of DOD provided protective gear. Experience: + Must have four years of experience in operation and maintenance of BAK-12 aircraft arresting systems and completed factory training on Mobile Aircraft Arresting Systems (MAAS)/BAK-12. + Shall have knowledge of principles of electronics and electricity including generation, conversion, transformation, distribution and utilization. + Must have three years of experience operating and maintaining prime power spot generators and backup generators. Skills : + Must be capable of giving and receiving instructions. + Must be fluent reading and speaking English. + Able and willing to work periods of long hours to meet mission requirements. + Military experience in a contingency environment and knowledge and experience working with government contracts preferred. We are committed to an inclusive and diverse workplace that values and supports the contributions of each individual. This commitment along with our common Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation and expand our success in the global marketplace. V2X is an Equal Opportunity /Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, protected veteran status or status as an individual with a disability. EOE/Minority/Female/Disabled/Veteran. #clearance #LI-RB1</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Long Description <br><br>Job Summary <br><br>Job Responsibilities <br> Job description </span><p><strong>Job Purpose:</strong></p><br> <ol> <li>To ensure the successful execution of low voltage and ICT projects with strict adherence to QA/QC standards, while providing presales technical support and managing site activities to deliver projects on time and within budget.</li> </ol> <p><strong>Key Responsibilities:</strong></p><br> <ul> <li>Prepare and review&nbsp;<strong>technical &amp; commercial proposals</strong>&nbsp;for tenders and company projects.</li> <li>Manage&nbsp;<strong>QA/QC activities</strong>, including preparation and review of SAT, FAT, ITP, NCR, and punch list closure.</li> <li>Supervise installation, testing, and commissioning of low voltage systems such as:</li> <li>CCTV</li> <li>Access Control Systems</li> <li>Gate Barrier &amp; Parking Management Systems</li> <li>Public Address &amp; Voice Evacuation Systems</li> <li>Audio Visual Systems</li> <li>BMS (Johnson Controls, Siemens, Honeywell)</li> <li>Coordinate with vendors and subcontractors to ensure compliance with project specifications.</li> <li>Attend clarification meetings with clients and follow up on approvals.</li> <li>Prepare site reports, monitor progress, and ensure compliance with health and safety standards.</li> <li>Manage&nbsp;<strong>handover documentation</strong>&nbsp;and ensure smooth project delivery.</li> <li>Stay updated with market requirements and general specifications.</li> </ul> <br> <br> <br><br>Candidate Requirements <br><p>•&nbsp;&nbsp; &nbsp;Bachelor Degree in engineering field&nbsp;<br>•&nbsp;&nbsp; &nbsp;3 to 5 &nbsp;years of experience in smilar position<br>•&nbsp;&nbsp; &nbsp;Ability to work in team&nbsp;</p><br> <p>•&nbsp;&nbsp; &nbsp;good interpersonal skills.</p><br> <p>•&nbsp;&nbsp; &nbsp;Attention to details&nbsp;<br>&nbsp;</p><br><br><br>Education <br><br><br> </div>

<p>Maintenance &amp; Testing Engineer Salary - 400 to 600Kwd (Rs.1,23,000 to 1,85,000) 5 - 7 years of Experience in Low Voltage Switchgear, Transformer, Medium Voltage Switchgear upto 11kv Must have Knowledge of Switchgear, Transformer, Ups &amp; Battery System Required Candidate profile Good knowledge to work as a team leader Good English Speaking Able to lead a team and handle site activities independently Engineering Degree Mandatory Salary Negotiable Location - Kuwait. Perks and benefits Accommodation, Transportation, Medical Insurance</p><p><strong>Desired Candidate Profile</strong></p><p>Good knowledge to work as a team leader Good English Speaking Able to lead a team and handle site activities independently Engineering Degree Mandatory</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p> The position contributes directly to revenue growth and market expansion by identifying new project opportunities, supporting tendering activities, and managing assigned accounts. The role supports the company’s strategic objectives by strengthening its presence in the electrical projects market and ensuring customer satisfaction through effective coordination and project follow-up.</p><ul><li>Manage project opportunities from inquiry to award.</li><li>Coordinate technical and commercial proposals with internal teams.</li><li>Follow up on quotations, negotiations, and project progress.</li><li>Drive sales for all electrical products (LV switchgear, busducts, Earthing, lighting,&nbsp;wiring devices, etc.).</li><li>Identify and develop opportunities with contractors, consultants, EPCs, and end-users.</li><li>Review project specifications and provide suitable technical solutions and proposals.</li><li>Prepare accurate BOQs, quotations, and technical/commercial submissions.</li><li>Follow up on tenders, approvals, and project awards.</li><li>Build strong relationships with VIP consultancy offices, VVIP clients, and major Kuwaiti ministries.</li><li>Conduct site visits to support project execution and resolve issues.</li><li>Monitor market trends and maintain updated sales forecasts and reports.</li><li>Support product development, identify market needs, introduce new product lines, and establish new strategic relationships with suppliers and partners.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>4–6 years of experience in Project Sales.</li><li>Experience in LV Switchgear and other related electrical products.</li><li>Strong communication and relationship-building skills.</li><li>Strong exposure to LV/MV switchgear, busducts, and related electrical products</li><li>Experience in handling government, industrial, and large construction projects</li></ul><p><br></p></div>

<p>Under general supervision, performs Artificial Lift (AL) installations and pulls, routine checks, and troubleshooting. Provides instruction and technical support to customer personnel in the proper handling and operating procedures of ALs. Performs basic well production analysis and repair of AL equipment and tests, splices, and repairs cable. Prepares paperwork to include IFTA reports, billable and non-billable hours, and mileage. Trains and coaches new hires in basic principles. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Maintains mechanical performance of truck used in transportation to and from the field. Trains and mentors lower level technicians at the well site. Performs basic mathematical calculations involving addition, subtraction, multiplication, and division is required. Basic reading comprehension and writing skills are required.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High School or Technical Diploma or a University Degree preferred</li><li>3 years to 8 years of experience in artificial lift operations including ESP Installations, pullouts, Y-tool, Shrouds and HPS is preferred</li><li>Willing work on a rotational schedule in remote locations in Kuwait (2 months On / 1 month Off)</li><li>Skills are typically acquired through completion of high school or similar education and 3 to 4 years of experience in artificial lift operations.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Perform preventive, corrective, and breakdown maintenance of protection systems in EHV, HV, and LV substations. Maintain, test, calibrate, and troubleshoot various protection relays and associated control circuits. Handle protection schemes including distance, differential, overcurrent, earth fault, busbar, transformer, feeder, and motor protection systems. Conduct relay testing using secondary injection and relay test equipment. Analyze relay operation records and fault reports to identify system abnormalities and recommend corrective actions. Test, maintain, and troubleshoot battery chargers, DC systems, batteries, and associated electronic circuits. Ensure proper operation of protection panels, annunciation systems, trip circuits, and interlocking schemes. Assist in commissioning, modification, and upgrading of protection systems and substation equipment. Prepare maintenance reports, relay settings records, testing documentation, and technical reports. Ensure compliance with utility standards, safety procedures, and maintenance schedules. Coordinate with operations and maintenance teams during shutdowns and emergency maintenance activities. Support troubleshooting activities during system faults and power interruptions.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's Degree in Electrical Engineering (as per Kuwait Bachelor's Degree Standard) Minimum 4 years of relevant experience in protection system maintenance Maximum Age: 40 Years Preferred Total Experience: 8 Years</p><p>Strong knowledge of EHV, HV, and LV substation protection systems. Hands-on experience with numerical and electromechanical relays. Familiarity with protection relay testing equipment such as Omicron, Megger, or equivalent. Ability to read and interpret protection drawings, schematics, and single-line diagrams. Knowledge of battery chargers, DC supply systems, and electronic circuits. Good analytical, troubleshooting, and problem-solving skills. Excellent communication and technical reporting abilities.</p><p>Experience with utility, transmission, distribution, or switchgear maintenance projects. Gulf/Kuwait substation maintenance experience will be an added advantage. Experience working on protection relays from manufacturers such as Siemens, ABB, Schneider Electric, and GE Grid Solutions.</p><p></p></section>

<p>Protection Maintenance Engineer</p><p>&nbsp;</p><p>Qualification</p><p>Bachelor Degree in Electrical Engineering according to Kuwait Bachelor Standard. Atleast 4 Years</p><p>10 Years of Minimum Experience</p><p>&nbsp;</p><p>Key Responsibilities</p><p>* Experience in maintenance of protective equipment’s involved in EHV, HV and LV substations.</p><p>* He should have theoretical and practical know how of all types of protection relays including distance protection relays in the substations including testing.</p><p>* He should be able to test and maintain battery charger and electronic circuit.</p>