Inspection Engineer Jobs - Capital Governorate (Kuwait) Kuwait

<p>Implement and maintain the Project Quality Management System (QMS) in accordance with project specifications and international standards. Review and ensure compliance with Inspection and Test Plans (ITPs), Quality Control Procedures (QCPs), and Method Statements. Monitor fabrication, erection, installation, and testing activities for mechanical equipment and piping. Conduct inspections of pressure vessels, storage tanks, heat exchangers, boilers, pumps, compressors, and piping systems. Verify incoming material inspection (MIR) and ensure material traceability throughout the project. Coordinate with construction, engineering, clients, and third-party inspection agencies for quality inspections. Ensure welding activities comply with approved WPS, PQR, and welder qualifications. Review welding records, fit-up inspections, visual inspections, and NDT reports.</p><p><strong>Desired Candidate Profile</strong></p><p>Qualification : BE/B tech-#Mechanical Industry : #Oil &amp; Gas exp #KOC Approved added advantage Experience : Min 10 years (8 years in Oil&amp;Gas)</p>

<p>Familiar with and knowledgeable in Permit to Work (PTW) systems applicable to Oil &amp; Gas operations. Responsible for overseeing and executing all field instrumentation activities (Fire Alarm, Gas Detection, and Fire Suppression Systems and Load shifting), including installation, testing, pre-commissioning, and commissioning during the construction phase. Verify that all activities are carried out in compliance with IFC drawings, approved method statements, and Inspection Test Plans (ITPs). Supervise instrumentation works such as cable pulling, cable termination, tubing installation, junction box installation, and panel wiring activities. Coordinate and assign daily work activities to subcontractors and submit daily progress reports to the Engineer. Ensure the safe installation, testing, and commissioning of instrumentation and control systems, including field devices, control panels, junction boxes, and cabling, in accordance with approved drawings and project specifications. Ensure proper segregation and routing of signal, control, and power cables during installation. Witness and support functional testing, loop checking, and pre-commissioning activities in coordination with QA/QC and commissioning teams. Assist in the preparation, tracking, and closure of punch list items arising from inspections, pre-commissioning, and commissioning activities. Maintain red-line mark-up drawings and support the design team during as-built documentation, loop folders, and handover dossiers. Coordinate closely with electrical, mechanical, and process disciplines to ensure smooth execution of multidisciplinary activities. Work in collaboration with the commissioning team to plan and execute system energization and loop testing activities. Ability to Supervise the load shifting of DCS, ESD. Liaise with client representatives to facilitate inspections, obtain approvals, and provide progress updates.</p>

Technician <br><br> Job Id :100195398<br><br>Jobboard subscription<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>???? WE ARE HIRING | KUWAIT ????????<br><br>We are looking for experienced engineering and technical professionals to join our Hygiene Products Manufacturing Team in Kuwait.<br><br>???? ENGINEERING POSITIONS<br><br> Production Engineer Mechanical Engineer Electrical Engineer<br><br>???? TECHNICIAN POSITIONS<br><br> Mechanical Technician Electrical Technician<br><br>Requirements<br><br>✅ 3–5+ years of experience in manufacturing<br><br>✅ Hands-on experience with production machinery<br><br>✅ Strong troubleshooting and maintenance skills<br><br>✅ Preventive & breakdown maintenance experience<br><br>✅ Engineering/technical qualification relevant to the position<br><br>⭐ Experience in tissue converting, paper converting, packaging, FMCG or similar manufacturing machinery will be highly preferred.<br><br>???? Candidates from Kuwait and overseas are welcome to apply.<br><br>???? Send Your CV<br><br>???? Whats App: +965 97256555<br><br>???? recruit.k81@gmail.com<br><br>Please mention the position applied for when sending your cv<br><br>Basic Details<br><br>Qualification<br><br>Posted : Today<br><br>Job Type : Full-Time<br><br>Jobboard subscription<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : +965 97256555<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : Not-Mentioned

<p><h4>Division / Project</h4> <p>KBR’s Sustainable Technology Solutions (STS) group is looking for a Quality Assurance & Quality Control Engineer for a 5-year PMC contract for the supply of programme management services with Kuwait Oil Company. The contract serves to support KOC to achieve its objectives of reaching optimum capacity in its oilfields and enhancing its facilities by the most efficient and economical means available.</p> <p>The contract aims to provide project management, coordination, planning, design, engineering, construction management, contracting, procurement, project controls, and other services for construction of new oil field facilities, upgrading of existing facilities, and transfer of technology.</p> <h4>Primary Objectives</h4> <p>Facilitate the development and effective implementation of Project Quality Management Systems by the Project Team in a manner that meets corporate, location, and contractual requirements.</p> <p>Manage project service and product verification and inspection consistent with criticality assessments and contractual and regulatory obligations.</p> <p>Manage project quality support functions including quality planning, preventive action, non-conformance control, corrective action, audits, and project quality reporting and review.</p> <h4>Qualifications including Required Education, Experience, & Skills</h4> <ul> <li>Bachelor’s degree in engineering</li> <li>8 years industry experience</li> <li>5 years post-graduation experience in oil and gas projects</li> <li>3 years post-graduation experience in the same designation</li> <li>Thorough understanding of the principles and practice of quality management and the implementation and improvement of management systems</li> <li>Practical experience of plant and vendor inspection of all types of mechanical equipment typically required at oil and gas installations, both onshore and offshore</li> <li>Ability to develop, maintain, and update in-house technical standards and specifications</li> <li>Communication skills – verbal and written – to report standards and presentation skills</li> <li>Demonstrable capabilities in planning and organising projects and activities to meet project requirements, e.g., quality planning and resourcing for projects to ensure they are suitably resourced with sufficient and capable quality management expertise</li> <li>Experience in managing a team of quality practitioners</li> <li>Familiarity with ISO 9000 and 14000 series and international standards relevant to the oil and gas industry</li> <li>Fully conversant with NDE requirements and sour environments</li> <li>Eligible for auditor registration or equivalent</li> </ul> <h4>Responsibilities</h4> <p>Work with the HSE / QA QC Manager and the Project Management Team to ensure:</p> <ul> <li>Project Management Plans and dependent systems and procedures are developed and implemented in compliance with the requirements of the WorleyParsons Project Management Process (WPMP) and Enterprise Management System (EMS), consistent with specific location, regulatory, and contractual requirements</li> <li>Project personnel are suitably trained in project plan requirements and to access and apply dependent systems, procedures, and reference materials</li> <li>Effectiveness of quality planning to ensure that process controls and prerequisite product and service verification and inspection arrangements are established and resourced for the project consistent with criticality, statutory, and contractual obligations</li> <li>Effective planning and implementation of design control, verification, validation, and review activities</li> <li>Effective implementation and coordination of vendor assessment and inspection activities</li> <li>Effective implementation and verification of construction inspection and testing activities</li> <li>Effective implementation of non-conformance, corrective action, and preventive action management processes</li> <li>Establishment of an effective risk-based audit program</li> <li>Effectiveness of Project Management Review Programs including collection, analysis, and reporting of project performance measures</li> <li>Participation in the global quality learning community initiative to enable quality professionals to communicate with each other and receive updates on latest developments</li> <li>Facilitation of the implementation of existing and new company processes and capability enhancements across the Project Operations</li> <li>Facilitation of independent review/certification of Project Quality Management Systems in line with company and customer requirements</li> <li>Ensure that the customer’s quality management requirements and concerns and the needs of multiple stakeholders are being identified and managed by the Project Team effectively</li> </ul> <h4>Decarbonization – Energy Transition – Sustainability</h4> <p>Belong. Connect. Grow. with KBR!</p></p><p></p>

<p>About the Role: We are seeking a competent Site Engineer specializing in civil pipeline works for marine GRP (Glass Reinforced Plastic) pipe installations. The ideal candidate will be responsible for supervising the installation, testing, and commissioning of GRP pipelines in marine and offshore environments, ensuring compliance with project specifications, international standards, and safety requirements. Key Responsibilities: • Supervise and coordinate daily pipeline installation activities including trenching, pipe laying, jointing, lamination, and backfilling for marine GRP pipelines • Ensure all GRP pipe installation works comply with approved drawings, method statements, specifications, and international standards (ISO 14692, AWWA M45) • Monitor trench excavation, dewatering, pipe bedding, and backfilling operations in accordance with project requirements • Supervise GRP pipe jointing and lamination procedures including adhesive bonding, coupling installation, and flange bolting • Coordinate with survey teams for pipeline route alignment, setting out, and as-built verification • Conduct site inspections and quality checks to verify adherence to specifications, safety regulations, and environmental standards • Review and interpret isometric drawings, spool drawings, and pipeline alignment sheets • Prepare and submit inspection requests (RFIs), method statements, and risk assessments • Monitor material deliveries including GRP pipes, fittings, couplings, and consumables; ensure proper handling and storage • Liaise with clients, consultants, subcontractors, and QAQC teams for inspections and approvals • Maintain accurate daily records including progress reports, manpower, equipment usage, and material consumption • Enforce HSE protocols including permits, toolbox talks, PPE compliance, and emergency procedures • Assist in pre-commissioning and commissioning activities including hydrotesting, flushing, and pressure testing • Prepare test packs and maintain documentation for pipeline testing and handover • Report delays, technical issues, or incidents to the Project Manager or Construction Manager • Provide technical guidance to site supervisors, foremen, and pipeline installation crews</p><p>Qualifications & Experience: Bachelor's degree in Civil Engineering, Mechanical Engineering, or related field Minimum 5+ years of experience in pipeline installation, with specific experience in GRP/FRP piping for marine or offshore projects Strong knowledge of GRP pipe materials, jointing methods (adhesive bonded, coupling), and lamination procedures Familiarity with international standards including ISO 14692 (GRP piping for offshore applications) and AWWA M45 • Experience with marine pipeline installation methods including trenching, floating installation, or underwater pull-in • Proficiency in MS Office, AutoCAD, and project management software • Knowledge of hydrotesting, pressure testing, and pipeline commissioning procedures • Valid safety certifications (NEBOSH, IOSH, OSHA) preferred • Offshore survival certificates (BOSIET/HUET) if required • Fluency in English; Arabic or Hindi/Urdu is a plus Required Skills: • Strong technical knowledge of GRP pipeline installation in marine environments • Excellent supervision and coordination abilities • Attention to detail for quality and compliance • Good communication and report writing skills • Problem-solving for site and technical issues • Ability to work under pressure and meet project deadlines • Team collaboration with site staff, subcontractors, and management</p>

<p>About the Role: We are seeking a competent Site Engineer specializing in civil pipeline works for marine GRP (Glass Reinforced Plastic) pipe installations. The ideal candidate will be responsible for supervising the installation, testing, and commissioning of GRP pipelines in marine and offshore environments, ensuring compliance with project specifications, international standards, and safety requirements. Key Responsibilities: • Supervise and coordinate daily pipeline installation activities including trenching, pipe laying, jointing, lamination, and backfilling for marine GRP pipelines • Ensure all GRP pipe installation works comply with approved drawings, method statements, specifications, and international standards (ISO 14692, AWWA M45) • Monitor trench excavation, dewatering, pipe bedding, and backfilling operations in accordance with project requirements • Supervise GRP pipe jointing and lamination procedures including adhesive bonding, coupling installation, and flange bolting • Coordinate with survey teams for pipeline route alignment, setting out, and as-built verification • Conduct site inspections and quality checks to verify adherence to specifications, safety regulations, and environmental standards • Review and interpret isometric drawings, spool drawings, and pipeline alignment sheets • Prepare and submit inspection requests (RFIs), method statements, and risk assessments • Monitor material deliveries including GRP pipes, fittings, couplings, and consumables; ensure proper handling and storage • Liaise with clients, consultants, subcontractors, and QAQC teams for inspections and approvals • Maintain accurate daily records including progress reports, manpower, equipment usage, and material consumption • Enforce HSE protocols including permits, toolbox talks, PPE compliance, and emergency procedures • Assist in pre-commissioning and commissioning activities including hydrotesting, flushing, and pressure testing • Prepare test packs and maintain documentation for pipeline testing and handover • Report delays, technical issues, or incidents to the Project Manager or Construction Manager • Provide technical guidance to site supervisors, foremen, and pipeline installation crews</p><p>Qualifications & Experience: Bachelor's degree in Civil Engineering, Mechanical Engineering, or related field Minimum 5+ years of experience in pipeline installation, with specific experience in GRP/FRP piping for marine or offshore projects Strong knowledge of GRP pipe materials, jointing methods (adhesive bonded, coupling), and lamination procedures Familiarity with international standards including ISO 14692 (GRP piping for offshore applications) and AWWA M45 • Experience with marine pipeline installation methods including trenching, floating installation, or underwater pull-in • Proficiency in MS Office, AutoCAD, and project management software • Knowledge of hydrotesting, pressure testing, and pipeline commissioning procedures • Valid safety certifications (NEBOSH, IOSH, OSHA) preferred • Offshore survival certificates (BOSIET/HUET) if required • Fluency in English; Arabic or Hindi/Urdu is a plus Required Skills: • Strong technical knowledge of GRP pipeline installation in marine environments • Excellent supervision and coordination abilities • Attention to detail for quality and compliance • Good communication and report writing skills • Problem-solving for site and technical issues • Ability to work under pressure and meet project deadlines • Team collaboration with site staff, subcontractors, and management</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>COMBINED GENERAL URGENT REQUIREMENT KUWAIT LONG-TERM OIL &amp; GAS PROJECT</p><p>Job Category: Oil &amp; Gas Construction / EPC Project</p><p>INTERVIEW MODE: ONLINE INTERVIEW</p><p><br></p><p>EXPERIENCE REQUIRED</p><p>Minimum: 8 Years</p><p>Maximum: 10 Years</p><p>Key Highlights for Poster:</p><ul><li>510+ Years Oil &amp; Gas Experience Required</li><li>Kuwait Society of Engineering Approval (Engineers)</li><li>Oil Company Approval Preferred</li><li>CSWIP / NACE / HSE Certifications Required</li><li>Accommodation Provided (Selected Categories)</li></ul><p>Interview Mode: Online Interview</p><p>Education Section:</p><p>QA/QC Engineer (Mechanical)</p><ul><li>Ensure project quality standards and specifications are followed</li><li>Review drawings, procedures, ITPs, and inspection documents</li><li>Conduct inspections for mechanical works, piping, equipment installation</li><li>Prepare QA/QC reports and coordinate with client inspectors</li></ul><p>Civil Site Engineer</p><ul><li>Supervise civil construction activities at site</li><li>Monitor concrete works, foundations, structures, and site execution</li><li>Ensure work follows drawings, specifications, and safety standards</li><li>Coordinate with contractors and project teams</li></ul><p>Mechanical Site Engineer</p><ul><li>Supervise mechanical installation activities</li><li>Monitor piping, equipment erection, and mechanical works</li><li>Ensure compliance with engineering standards and project requirements</li><li>Coordinate inspections and site progress</li></ul><p>Electrical Site Engineer</p><ul><li>Supervise electrical installation works</li><li>Ensure proper execution of electrical systems and equipment</li><li>Review drawings and conduct inspections</li><li>Coordinate testing and commissioning activities</li></ul><p>HSE / Safety Engineer</p><ul><li>Implement HSE policies and safety procedures</li><li>Conduct safety inspections, audits, and toolbox talks</li><li>Monitor site safety compliance</li><li>Prepare safety reports and incident investigation.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor of Engineering (B.E)</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><br></p> <p> </p> <p> <strong>Your Development Journey</strong> </p> <p>You ll be enrolled in our 4-year Field Engineer Technical Development Program, which blends classroom learning with real-world experience: </p> <ul> <li>Year 1: Work with guidance and take part in hands-on training at one of our global centers. Travel may be needed to gain real-world experience </li> <li>Year 2: Take on more responsibility at the wellsite while continuing to grow your technical skills through hands-on and classroom training </li> <li>Years 3 &amp; 4: Expanding your knowledge and skills, and may lead teams at the wellsite while serving as the main contact for our clients </li> </ul> <p> </p> <p> <strong>Your day-to-day could include: </strong> </p> <ul> <li>Prepare, deploy, and operate advanced downhole tools to meet specific wellsite objectives </li> <li>Utilize cutting-edge simulation software to design and optimize wellsite solutions tailored to client needs </li> <li>Analyse performance data and recommend improvements </li> <li>Manage equipment logistics and ensure seamless setup and operation at the rig site </li> <li>Create detailed post-job reports and share actionable insights with clients and internal teams </li> <li>Champion a culture of continuous improvement with a strong focus on safety, quality, and performance </li> <li>Deliver front-line engineering support to our customers throughout operations, resolving issues independently </li> </ul> <p> </p> <p> <strong>What We re Looking For</strong> </p> <ul> <li>Graduated with bachelor s degree in engineering (all fields) within the last 24 months </li> <li>No more than 1 year of experience </li> <li>English language fluent proficiency (written and spoken) </li> <li>Strong communication and interpersonal skills </li> <li>Ability to analyse complex problems, apply critical thinking, and make informed decisions </li> <li>A passion for hands-on work and learning in dynamic environments (onshore and offshore) </li> </ul> <p> </p> <p> <strong>What to Expect</strong> </p> <p>This role is physically and mentally demanding. You ll work 12-hour shifts (day or night), often in tough weather conditions. You may be away from home for extended periods, including weekends and holidays. But if you re up for the challenge, the rewards are big. </p> <p>You ll join one of our specialized product lines, such as: </p> <ul> <li>Completions </li> <li>Drilling Services </li> <li>Wireline Services </li> <li>Artificial Lift </li> <li>Well Services </li> <li>Managed Pressure Drilling and many more </li> </ul> <p> </p> <p><br></p> <p> </p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an experienced and results-driven <strong> HVAC Sales Engineer</strong> to join our growing team in <strong>Kuwait</strong>. The ideal candidate will have a strong background in HVAC project sales and business development, with proven experience selling Air Conditioning systems including <strong>Split AC, Ducted AC, Window AC, VRF/VRV systems</strong>, and related MEP solutions within the <strong>Kuwait/GCC market</strong>.</p><p>This role requires a proactive sales professional who can identify project opportunities, build strong relationships with contractors, consultants, developers, and end-users, and drive sustainable revenue growth.</p><p>Key Responsibilities</p><ul><li><p>Drive sales of Split AC, Window AC, Ducted AC Systems, VRF/VRV Systems, and associated MEP products for projects.</p></li><li><p>Generate new business through market visits, client meetings, networking, and business development activities.</p></li><li><p>Identify potential accounts and develop relationships with MEP contractors, consultants, developers, and project clients.</p></li><li><p>Promote and sell HVAC products along with related MEP solutions based on customer and project requirements.</p></li><li><p>Manage project sales opportunities and actively follow up on leads to achieve monthly and annual sales targets.</p></li><li><p>Build and maintain strong customer relationships to support long-term business growth.</p></li><li><p>Monitor market trends, competitor activities, and emerging project opportunities.</p></li><li><p>Coordinate with engineering, estimation, and project teams to ensure successful project execution and customer satisfaction.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum <strong>2-3 years of Kuwait/GCC experience</strong> in HVAC/AC project sales.</p></li><li><p>Strong experience in selling <strong>Split AC, Window AC, Ducted AC, and VRF/VRV Systems</strong>.</p></li><li><p>Previous experience working with reputed HVAC/AC brands is highly preferred.</p></li><li><p>Engineering background preferred.</p></li><li><p>Proven track record in business development, project sales, and customer relationship management.</p></li><li><p>Strong network with MEP contractors, consultants, developers, and project owners in Kuwait is an advantage.</p></li><li><p>Excellent communication, negotiation, and presentation skills.</p></li><li><p>Ability to work independently and drive sales growth.</p></li><li><p>Valid Kuwait Driving License is preferred.</p></li></ul><p>Preferred Qualifications</p><ul><li><p>Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related engineering field.</p></li><li><p>Experience in project sales of HVAC/AC equipment within the <strong>Kuwait market</strong>.</p></li><li><p>Familiarity with <strong>Kuwait Municipality regulations</strong>, local MEP standards, and HVAC installation practices.</p></li><li><p>Knowledge of project cost estimation, BOQ analysis, tendering, and contract documentation.</p></li><li><p>Experience using CRM software and preparing technical and commercial proposals.</p></li></ul><p></p></section>

<p>Greetings from MEIL!!! We have Openings for #Engineer construction piping I #Kuwait (KOC) Qualification : B tech- #Mechanical Industry : #Oil &amp; Gas exp #KOC Approved added advantage Experience : Min 10+ years (8years in Oil&amp;Gas) Job Description : Should have experience in EPC Companies Oil &amp; Gas refinery projects. Execute piping construction activities for oil &amp; gas, refinery, petrochemical, LNG, and EPC projects. Supervise piping fabrication, erection, installation, and testing activities in accordance with approved drawings, specifications, and project procedures. Review P&amp;IDs, piping isometrics, GA drawings, plot plans, and piping layouts before execution. Coordinate with engineering, civil, mechanical, electrical, instrumentation, QA/QC, planning, and HSE teams to ensure seamless project execution. Coordinate NDT activities, weld repairs, and inspection clearance with QA/QC teams. Ensure completion of hydrotesting, pneumatic testing, flushing, air blowing, chemical cleaning, and reinstatement activities. Location : Kuwait If your Interested and Suitable Candidates for this position send your updated cv along with below details to EMAIL_ADDRESS . Total Exp: Relevant Exp : Qualification : DOB : Age : Current Company : Current location : Native : Current CTC : Expected CTC : Notice Period : Willing to relocate for Kuwait location. Reason for job change: Passport Validity : Note 1 : Mandatory to have min 10 years all previous companies experience letters</p><p><strong>Desired Candidate Profile</strong></p><p>Qualification : B tech- #Mechanical Industry : #Oil &amp; Gas exp #KOC Approved added advantage Experience : Min 10+ years (8years in Oil&amp;Gas)</p>

<p><h4>Exceptional hospitality starts with you</h4> <p>Picture yourself brightening someone’s day. When you join our hotels team, that’s exactly what you’ll do every time you come to work! As an assistant chief engineer, you’re not just overseeing physical building and systems maintenance and repairs – you’re spreading the light and warmth of hospitality by delivering memorable experiences that make the stay for every guest.</p> <h4>Here's what you'll do during a typical day:</h4> <ul> <li><strong>Lead and develop a high-performing team:</strong> Recruit, train, supervise, and mentor team members; conduct performance evaluations, provide professional development opportunities, and recognise achievements to build a motivated and high-performing team.</li> <li><strong>Assist chief engineer with managing daily maintenance operations:</strong> Oversee maintenance activities, prioritize tasks, and verify completion through the property maintenance management system; ensure timely resolution of service requests, guest concerns, and emergencies.</li> <li><strong>Ensure safety and compliance:</strong> Oversee the maintenance of the physical building, mechanical systems, electrical systems, HVAC, and life safety systems; coordinate inspections and uphold safety and compliance standards in line with national and local regulations.</li> <li><strong>Assist chief engineer with driving engineering performance:</strong> Monitor departmental key performance indicators (KPIs), including equipment upkeep, audit results, and team productivity, and act as needed to improve performance.</li> <li><strong>Support hotel-wide operational leadership:</strong> Collaborate with the broader hotel leadership team in overseeing evacuation procedures, duty manager coverage, and other safety protocols as needed.</li> <li><strong>Oversee contractor work:</strong> Supervise external contractors and inspect completed work for quality and compliance.</li> <li><strong>Lead energy efficiency initiatives:</strong> Support and oversee property-wide energy conservation programs to reduce utility costs.</li> </ul> <h4>What it takes to make the stay</h4> <p>At Hilton, our core values define what it takes to succeed here and guide the qualities we look for in every team member: a passion for spreading the light and warmth of hospitality; acting with integrity and always doing the right thing; inspiring others through leadership; a belief that teamwork drives the best outcomes; a sense of ownership and accountability; and a focus on the now, bringing urgency and discipline to every moment, knowing it can make a lasting impact.</p> <h4>Join an award-winning workplace culture</h4> <p>At Hilton, we don’t just deliver exceptional experiences for our guests—we build an exceptional workplace for the team members who make it all possible. As a global leader in hospitality, we’ve welcomed more than 3 billion guests worldwide, all while staying true to our founding vision: to fill the earth with the light and warmth of hospitality.</p> <p>Our award-winning culture has earned us repeated recognition on the world’s best workplaces list by Great Place to Work and Fortune. With our suite of world-class brands and a company-wide commitment to providing the best stay for every guest, we’re setting new standards for the future of travel.</p> <p>Whether you’re starting your career or exploring something new, Hilton supports your journey every step of the way. Come for the job, stay for the career—and help us make every stay a little more magical.</p></p><p></p>

<p><h4>About us</h4> <p>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.</p> <h4>Primary objective</h4> <p>Facilitate the development and effective implementation of Project Quality Management Systems by the Project Team in a manner that meets corporate, location and contractual requirements.</p> <p>Manage project service and product verification and inspection of the project consistent with criticality assessments and contractual and regulatory obligations.</p> <p>Manage project quality support functions including quality planning, preventive action, non-conformance control, corrective action, audits and project quality reporting and review.</p> <p>Accountable for QA/QC related matters at project sites.</p> <p>Must have experience in inspections of all stages of projects in oil & gas installations and construction QA/QC works.</p> <p>Excellent written, coordination and verbal communication skills.</p> <p>Ability to develop, update and maintain in-house technical standards and specifications.</p> <p>Familiarity with ISO 9000 series and international standards relevant to the oil and gas industry.</p> <h4>What you will bring:</h4> <strong>HSE Management</strong><br> <p>Demonstrate behavior and practices consistent with managerial, co-worker and community duty of care obligations.</p> <p>Work with the Project HSE Advisor and the Project Management Team to ensure that all areas of the project’s operations conform to applicable WorleyParsons, regulatory and contractual HSE obligations.</p> <strong>Quality Management</strong><br> <p>Work with the Location Quality Manager and the Project Management Team to ensure:</p> <ul> <li>Project Management Plans and dependent systems and procedures are developed and implemented in compliance with the requirements of the WorleyParsons Project Management Process (WPMP) and Enterprise Management System (EMS) consistent with specific location, regulatory and contractual requirements.</li> <li>Project personnel are suitably trained in project plan requirements and to access and apply dependent systems, procedures and reference materials via the Project Web Site, EMS, WPMP and the Knowledge Communities as applicable.</li> <li>Effectiveness of quality planning to ensure that process controls and prerequisite product and service verification and inspection arrangements are established and resourced for the project consistent with criticality, statutory and contractual obligations.</li> <li>Effective planning and implementation of design control, verification, validation and review activities.</li> <li>Effective implementation and coordination of vendor assessment and inspection activities.</li> <li>Effective implementation and verification of construction inspection and testing activities.</li> <li>Effective implementation of non-conformance, corrective action, and preventive action management processes.</li> <li>Establishment of an effective risk-based audit program.</li> <li>Effectiveness of Project Management Review Programs including collection, analysis and reporting of project performance measures.</li> </ul> <strong>Capability Enhancement</strong><br> <ul> <li>Participate in the global quality learning community initiative to enable quality professionals to communicate with each other and receive updates on latest developments.</li> <li>Support in-house education, promotion and awareness programs relating to sound quality management practice and WorleyParsons quality strategies.</li> <li>Facilitate the implementation of existing and new company processes and capability enhancements across the Project Operations.</li> <li>Determine areas of potential improvement and, in consultation with the Location Quality Manager and Project Management Team, facilitate the implementation of improvements to address these areas and evaluate the outcomes of the improvements. If this position has identified such areas, he or she should take ownership.</li> <li>Facilitate independent review and certification of Project Quality Management Systems in line with corporate, legislative or customer requirements.</li> </ul> <strong>Customer Relationships</strong><br> <p>Ensure that the customer’s quality management requirements and concerns and the needs of multiple stakeholders are being identified and managed by the Project Team effectively.</p> <strong>Resources</strong><br> <ul> <li>In conjunction with the Project Management Team and the Location Quality Manager, recruit and allocate quality practitioners to project verification and inspection roles to ensure these activities are suitably resourced.</li> <li>Ensure that new quality practitioners are effectively inducted in all aspects that relate to the quality aspects of the project.</li> </ul> <strong>Performance Management</strong><br> <ul> <li>In conjunction with the Project Management Team and the Location Quality Manager, provide functional leadership for project quality personnel.</li> <li>Strengthen and coach project quality personnel to support development, management and administration of project quality management systems in response to project and customer expectations.</li> </ul> <h4>Qualifications / Experience:</h4> <ul> <li>Full-time Bachelor’s Degree in Engineering (any discipline) from an accredited university.</li> <li>Minimum 8 years of total experience post graduate studies.</li> <li>Minimum 5 years of experience in the oil & gas, refinery, or petrochemical industry.</li> <li>Minimum 5 years of experience as a QA/QC Engineer or equivalent.</li> <li>Must have experience in inspections of all stages of projects in oil & gas installations and construction QA/QC works.</li> <li>Must have experience in developing, updating and maintaining in-house technical standards and specifications.</li> <li>Fully conversant with NDE requirements and sour environments.</li> <li>Familiarity with ISO 9000 and 14000 series and international standards relevant to the oil and gas industry.</li> <li>Excellent written, coordination and verbal communication skills.</li> </ul> <h4>Moving forward together</h4> <p>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</p> <p>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</p> <p>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</p></p><p></p>

<p>Job Purpose The Data Center Mechanical Engineer owns the mechanical and cooling infrastructure of the data center at engineering level, from the central cooling plant through to the data hall cooling environment. The role is responsible for mechanical maintenance strategy, system reliability, operational procedures, environmental performance, vendor management, safety compliance, spare-parts planning, and emergency response. The Mechanical Engineer directs the Mechanical Manning Technicians, authorizes equipment changeovers and critical maintenance activities, approves mechanical procedures, and acts as the mechanical technical authority during incidents and operational escalations.</p><p>Key Responsibilities and Areas of Ownership</p><ul><li>Take engineering ownership of the data center mechanical and cooling infrastructure, including chillers, cooling towers, chilled-water pumps, condenser-water pumps, heat exchangers, CRAH units, CRAC units, AHUs, ventilation systems, fans, filters, coils, valves, actuators, piping systems, and associated controls.</li><li>Manage the operation, reliability, and performance of chilled-water and precision-cooling systems serving the data halls and supporting areas.</li><li>Own mechanical equipment operating procedures, changeover procedures, start-up and shutdown sequences, and equipment rotation plans.</li><li>Authorize, lead, and supervise critical mechanical activities, including chiller changeovers, pump changeovers, cooling-tower changeovers, isolation activities, system draining, system filling, and restoration of equipment to service.</li><li>Monitor and maintain data hall environmental conditions, including temperature, humidity, airflow, differential pressure, cooling capacity, and equipment loading.</li><li>Review chilled-water supply and return temperatures, water flow, system pressure, differential pressure, valve positions, and system delta-T to identify performance issues and operational risks.</li><li>Manage cooling redundancy and capacity to ensure sufficient cooling remains available during maintenance, equipment failure, testing, or abnormal operating conditions.</li><li>Own the mechanical safety program, including Lockout/Tagout, Permit to Work, risk assessments, safe isolation, refrigerant safety, chemical-handling controls, and compliance with HSE requirements.</li><li>Develop and manage the annual mechanical Planned Preventive Maintenance program in accordance with OEM recommendations, equipment criticality, maintenance history, and operational requirements.</li><li>Prepare, review, approve, and maintain mechanical Standard Operating Procedures, Methods of Procedure, Emergency Operating Procedures, maintenance instructions, risk assessments, and equipment changeover procedures.</li><li>Ensure that all mechanical maintenance activities are planned around available cooling redundancy and executed without compromising data center availability.</li><li>Own vendor coordination for mechanical maintenance activities and supervise OEM major services, equipment overhauls, repairs, inspections, and specialist testing.</li><li>Review vendor method statements, risk assessments, service reports, test results, recommendations, and corrective-action requirements.</li><li>Manage critical spare-parts and inventory planning for chillers, pumps, cooling towers, CRAH and CRAC units, valves, actuators, sensors, filters, belts, bearings, motors, VFDs, and other mechanical systems.</li><li>Analyze cooling-system performance, equipment efficiency, energy consumption, operating trends, alarm history, temperature profiles, water-flow conditions, and equipment loading.</li><li>Identify and implement opportunities to improve cooling efficiency, airflow management, chilled-water performance, equipment sequencing, and overall energy performance without reducing system resilience.</li><li>Investigate mechanical faults, high-temperature conditions, leaks, abnormal vibration, low-flow conditions, low delta-T, equipment trips, control failures, and recurring alarms.</li><li>Lead root cause analysis for mechanical incidents and equipment failures and implement corrective and preventive actions.</li><li>Direct, develop, and train Mechanical Manning Technicians in operational procedures, inspections, first-line maintenance, alarm response, safe isolation, and incident escalation.</li><li>Review technician shift logs, inspection checklists, operating readings, alarm reports, and job-card closure records.</li><li>Support testing and commissioning activities, integrated systems testing, functional performance testing, equipment acceptance, redundancy verification, and operational-readiness activities.</li><li>Support predictive and condition-based maintenance programs, including vibration analysis, oil analysis, refrigerant checks, water and coolant sampling, thermal inspections, leak detection, and equipment-performance trending.</li><li>Manage liquid-cooling systems, Cooling Distribution Units, coolant loops, leak-detection systems, valves, pumps, and associated controls where installed.</li><li>Coordinate water-treatment activities, water-quality monitoring, chemical dosing, sampling, and corrective actions for chilled-water, condenser-water, and liquid-cooling systems where applicable.</li><li>Support WTP, STP, plumbing, drainage, and mechanical fire-protection systems where included within the data center operational scope.</li><li>Coordinate with electrical, BMS, IT, operations, HSE, vendors, and management teams during planned maintenance, incidents, testing, and emergency situations.</li><li>Maintain accurate mechanical documentation, asset records, maintenance reports, operating procedures, equipment histories, incident reports, testing records, and technical drawings.</li><li>Act as the mechanical technical authority during cooling incidents and operational escalations on a 24/7 on-call basis.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Engineer Level</li><li>Bachelor's degree in Mechanical Engineering.</li><li>Minimum of 5 years of mechanical, HVAC, cooling-plant, or critical-facility operations and maintenance experience.</li><li>At least 2 years of experience in a data center or another critical facility where loss of cooling could affect essential operations.</li><li>Demonstrated engineering-level experience with chilled-water systems, precision cooling, or critical HVAC systems.</li><li>Practical knowledge of chillers, pumps, cooling towers, heat exchangers, CRAH units, CRAC units, AHUs, valves, actuators, VFDs, and mechanical controls.</li><li>Experience in managing cooling redundancy, equipment capacity, environmental conditions, and critical maintenance activities in a live operational environment.</li><li>Demonstrated ownership of mechanical maintenance planning, technical procedure writing, incident response, vendor management, and spare-parts planning.</li><li>Experience preparing or approving SOPs, MOPs, EOPs, risk assessments, isolation plans, and maintenance procedures.</li><li>Ability to read and interpret P&amp;IDs, mechanical drawings, equipment schematics, sequence-of-operation documents, control diagrams, and OEM technical manuals.</li><li>Working knowledge of BMS or BAS platforms, mechanical alarms, equipment trends, sensors, control sequences, and environmental monitoring.</li><li>Good understanding of chilled-water temperatures, flow, pressure, differential pressure, delta-T, heat transfer, airflow, humidity, and cooling-capacity principles.</li><li>Experience with root cause analysis, corrective-action planning, and technical incident reporting.</li><li>Familiarity with testing, commissioning, integrated systems testing, and mechanical-system operational-readiness activities.</li><li>Fluent written and spoken English with strong technical reporting and communication skills.</li></ul><p>Other Requirements</p><ul><li>The role is fully on-site within an operational data center environment.</li><li>Availability for 24/7 on-call support is required.</li><li>The employee must be available to support planned shutdowns, emergency maintenance, testing activities, shift coverage, weekends, nights, and public holidays when operationally required.</li><li>The employee must comply with all company, client, data center, HSE, Permit to Work, LOTO, security, and access-control requirements.</li><li>The employee must be able to coordinate effectively with technicians, contractors, OEM vendors, operations teams, IT teams, and other engineering disciplines.</li></ul>

<p>The SOC Engineer is responsible for the design, implementation, configuration, and continuous optimization of ZainTECH's Security Operations Centre (SOC) technology platforms, ensuring secure, scalable, and resilient security monitoring services for enterprise and government customers across the MENA region. This is a hands-on engineering role focused on designing and maintaining Security Information and Event Management (SIEM), Security Orchestration, Automation and Response (SOAR), and supporting security technologies. The role owns the end-to-end lifecycle of security monitoring capabilities - from onboarding new log sources and developing detection content to automating operational workflows and continuously enhancing SOC performance - while ensuring solutions align with customer requirements, cybersecurity best practices, and operational standards. Responsibilities: SIEM &amp; Security Platform Engineering Design, implement, configure, and maintain enterprise SIEM and SOAR platforms supporting ZainTECH's Managed Security Services portfolio. Deploy and maintain highly available, scalable, and secure SOC infrastructure across customer environments. Manage platform upgrades, patching, configuration management, and lifecycle activities to ensure platform stability and performance. Ensure SOC technologies remain aligned with operational, security, and customer requirements. Detection Engineering &amp; Security Content Develop, maintain, and optimise SIEM detection content, including correlation rules, dashboards, reports, alerts, watchlists, and use cases. Improve detection capabilities by analysing emerging threats, attack techniques, and operational trends. Reduce false positives through continuous tuning and refinement of detection logic. Map detection capabilities to recognised cybersecurity frameworks such as MITRE ATT&amp;CK. Platform Integration &amp; Automation Integrate security technologies, cloud platforms, infrastructure, and third-party solutions into the SIEM ecosystem. Develop custom parsers, connectors, and data ingestion mechanisms to support new customer environments. Design and implement SOAR playbooks to automate investigation, enrichment, notification, and response activities. Optimise data collection, normalisation, and event processing to improve operational efficiency. Operational Support &amp; Continuous Improvement Provide technical support to SOC Analysts during security investigations and major incident response activities. Troubleshoot platform issues and perform root cause analysis to maintain service availability. Produce technical documentation, implementation guides, and operational runbooks. Identify opportunities to improve SOC maturity through automation, process optimisation, and engineering best practices. Collaborate with Cybersecurity Consulting, Incident Response, Product Management, and Delivery teams to continuously enhance Managed Security Services.</p><p><strong>Desired Candidate Profile</strong></p><p>3-5 years of hands-on experience designing, implementing, and administering SIEM platforms within enterprise or Managed Security Services environments. Strong experience with one or more SIEM platforms such as Microsoft Sentinel, Splunk Enterprise Security, IBM QRadar, ArcSight, LogRhythm, or Elastic Security. Experience integrating multiple security technologies, including EDR, firewalls, IDS/IPS, cloud security platforms, identity platforms, and threat intelligence feeds. Working knowledge of Windows, Linux, networking, scripting, APIs, and automation technologies. Experience implementing SOAR platforms and security automation workflows. Knowledge of MITRE ATT&amp;CK, threat intelligence integration, and detection engineering principles. Experience supporting enterprise cloud environments including Microsoft Azure, AWS, or Google Cloud Platform. Experience working within a Managed Security Services Provider (MSSP) environment. Bachelor s degree in Cybersecurity, Information Security, Computer Science, Information Technology, Engineering, or a related field. Security +, CEH or any relevant certification preferred</p>

<p><h4>Division / Project</h4> <p>KBR’s Sustainable Technology Solutions (STS) group is looking for a Lead Quality Assurance & Quality Control Engineer for a 5-year PMC contract for the supply of Programme Management services with Kuwait Oil Company. The contract serves to support KOC to achieve its objectives of reaching optimum capacity in its oilfields and enhancing its facilities by the most efficient and economical means available.</p> <p>The contract aims to provide project management, coordination, planning, design, engineering, construction management, contracting, procurement, project controls, and other services for construction of new oil field facilities, upgrading of existing facilities, and transfer of technology.</p> <h4>Primary Objectives</h4> <p>Facilitate the development and effective implementation of Project Quality Management Systems by the Project Team in a manner that meets corporate, location, and contractual requirements.<br> Manage project service and product verification and inspection consistent with criticality assessments and contractual and regulatory obligations.<br> Manage project quality support functions including quality planning, preventive action, non-conformance control, corrective action, audits, and project quality reporting and review.</p> <h4>Qualifications including Required Education, Experience, & Skills</h4> <ul> <li>Bachelor in Engineering Degree</li> <li>12 years total post graduation experience</li> <li>8 years post graduation experience in oil and gas projects</li> <li>5 years post graduation experience in same designation</li> <li>Thorough understanding of the principles and practice of Quality Management and the implementation and improvement of management systems</li> <li>Practical experience of plant and vendor inspection of all types of mechanical equipment typically required at oil & gas installations, both onshore and offshore</li> <li>Ability to develop, maintain, and update in-house technical standards and specifications</li> <li>Communication skills – verbal and written – to report standards and presentation skills</li> <li>Demonstrable capabilities in planning and organizing projects and activities to meet project requirements, e.g. quality planning and resourcing for projects to ensure they are suitably resourced with sufficient and capable quality management expertise</li> <li>Experience in managing a team of quality practitioners</li> <li>Fully conversant with NDE requirements and sour environments</li> <li>Excellent written, coordination, and verbal communication skills</li> <li>Familiarity with ISO 9000 and 14000 Series and international standards relevant to oil and gas industry</li> </ul> <h4>Responsibilities</h4> <p>Work with the HSE / QA QC Manager and the Project Management Team to ensure:</p> <ul> <li>Project Management Plans and dependent systems and procedures are developed and implemented in compliance with the requirements of the WorleyParsons Project Management Process (WPMP) and Enterprise Management System (EMS) consistent with specific location, regulatory, and contractual requirements</li> <li>Project personnel are suitably trained in project plan requirements and to access and apply dependent systems, procedures, and reference materials</li> <li>Effectiveness of quality planning to ensure that process controls and prerequisite product and service verification and inspection arrangements are established and resourced for the project consistent with criticality, statutory, and contractual obligations</li> <li>Effective planning and implementation of design control, verification, validation, and review activities</li> <li>Effective implementation and coordination of vendor assessment and inspection activities</li> <li>Effective implementation and verification of construction inspection and testing activities</li> <li>Effective implementation of non-conformance, corrective action, and preventive action management processes</li> <li>Establishment of an effective risk-based audit program</li> <li>Effectiveness of Project Management Review Programs including collection, analysis, and reporting of project performance measures</li> <li>Participation in the global quality learning community initiative to enable quality professionals to communicate with each other and receive updates on latest developments</li> <li>Facilitation of the implementation of existing and new company processes and capability enhancements across the Project Operations</li> <li>Facilitation of independent review/certification of Project Quality Management Systems in line with company and customer requirements</li> <li>Ensuring that the customer’s quality management requirements and concerns and the needs of multiple stakeholders are identified and managed by the Project Team effectively</li> </ul> <h4>Decarbonization – Energy Transition – Sustainability</h4> <p>Belong. Connect. Grow.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The PKI Certificate Authority Engineer is required to be certified at the expert level in multiple disciplines of systems and security (e.g. MCSE &amp; CISSP). The engineer provides expert level engineering support for all Public Key Infrastructure services. A PKI Certificate Authority Engineer supports Enterprise-class infrastructure in the RCC-SWA by providing optimization, administration, and technical documentation of all Public Key Infrastructure systems. The engineer shall perform discovery, analysis, monitoring, and management of all digital certificates deployed by the Certificate Authority (CA). The position will collaborate with system owners and serve as the primary support entity for problem escalation, reporting directly to the section team lead. Broad knowledge and expert level hands-on experience in a large Enterprise are essential for success in this role. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position.</p><p>Responsibilities</p><ul><li>Operate and maintain Certificate Authority Servers but not limited to databases and Hardware Security Module on NIPR, SIPR and Coalition enclaves.</li><li>Manage the CA life cycle, including generation, revocation, expiry, and updating to determine where each certificate is installed.</li><li>Troubleshoot Active Directory Certificate Services, HSMs, Certificate Enrollment Web Services, Certificate Enrollment Policy Web Service, and Internet Information Services (IIS).</li><li>Aid with defining and developing the strategic plan for Public Key Infrastructure (PKI) and assist with the implementation of PKI and other certificate related technologies.</li><li>Create and maintain system documentation for certificate-based technologies, including installation, configuration, and appropriate troubleshooting steps.</li><li>Improve existing processes through solutions to recurring problems and enhancements to existing solutions or documentation.</li><li>Performs other duties and assignments as required.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><b>Qualifications</b></p><p>Security Clearance: Requires an active Secret Clearance</p><p>Education / Certifications: One-year related experience may be substituted for one year of education, if degree is required. Bachelor s Degree or equivalent experience preferably in Computer Science or MIS, IS, Engineering or related field. This position requires candidates to adhere to DoD 8570.01M. All candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. Baseline certifications cannot also be used as a Computing Environment (CE) certification. The authorized certifications for this job title are listed as follows:</p><p>BASELINE: Cisco: CCNP Security CompTIA: CASP+ ce: Advanced Security Practitioner GIAC: GCED: Certified Enterprise Defender GIAC: GCIH: Certified Incident Handler ISACA: CISA: Certified Information Systems Auditor ISC2: CCSP Certified Cloud Security Professional ISC2: CISSP ( or Associate ): Certified Information Systems Security Professional</p><p>COMPUTING ENVIRONMENT (CE): Microsoft: 365 Certified: Enterprise Administrator Expert Microsoft: Certified: Azure Database Administrator Associate Microsoft: Certified: Azure Security Engineer Associate Microsoft: Certified: Azure Solutions Architect Expert Microsoft: MCSA: Cloud Platform Microsoft: MCSA: Windows Server 2012 Microsoft: MCSA: Windows Server 2016 Microsoft: MCSE: Cloud Platform and Infrastructure Microsoft: MCSE: Core Infrastructure Microsoft: MCSE: Data Management and Analytics Microsoft: MCSE: Productivity Solutions Expert Microsoft: MCSE: Server Infrastructure 2012</p><p>Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree in a Software Engineering or Business Information Systems discipline for three years general experience. At least five (5) years of practical experience working with:</p><ul><li>MS Active Directory Domain Services</li><li>MS Active Directory Certificate Services ( AD CS )</li><li>Public Key Infrastructure ( PKI )</li><li>Cryptography Standards</li><li>Managing keystores ( JKS, JCEKS, PKCS #12 )</li><li>Windows MSCS) and trust stores</li><li>Hardware security modules ( HSM's )</li><li>Key management services ( KMS )</li><li>Online Certificate Status Protocol ( OCSP )</li><li>Two-factor authentication: RSA, Smartcards ( CAC ).</li></ul><p>Understanding of FIPS 140-2 compliance and Standard Technical Implementation Guides ( STIGs ).</p><p>Experience with a customer service-oriented company.</p><p>Skills &amp; Technology Used: Ability to troubleshoot servers and infrastructure equipment, assess networking requirements and provide solutions, and make accurate and independent decisions under pressure. Excellent organizational, interpersonal, written, and verbal communication skills. Ability to perform comfortably in a fast-paced, deadline-oriented work environment and to successfully execute many complex tasks simultaneously. MS Active Directory Domain Services. MS Active Directory Certificate Services (AD CS ). Public Key Infrastructure ( PKI ). Cryptography Standards. JKS, JCEKS, PKCS #12, Windows MSCS. </p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an Assistant Resident Engineer to join our team for an exciting port project in Kuwait. In this role, you will be responsible for supporting the Resident Engineer in overseeing project management, construction management, and supervision services for a major port project. Assist in managing day-to-day project activities, ensuring adherence to schedules, budgets, and quality standards Conduct regular site inspections and monitor construction progress Collaborate with all project stakeholders to resolve technical issues and ensure project compliance Support the Resident Engineer in coordinating with local authorities and regulatory bodies Participate in project meetings and contribute to decision-making processes Ensure compliance with safety regulations and environmental standards Assist in quality control and quality assurance activities throughout the project lifecycle Monitor and report on project risks, recommending mitigation strategies as needed</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree in Civil Engineering or related field Minimum of 12 years of experience in civil engineering, preferably in port projects or marine construction Strong knowledge of project management principles and construction management techniques Excellent skills in Microsoft Office Suite, including Project and Excel Strong analytical and problem-solving skills Excellent organizational and time management abilities Effective communication and interpersonal skills Ability to work in a multicultural environment Willingness to relocate to Kuwait for the duration of the project</p><p></p></section>

<p>About the Role: We are seeking a skilled Technical Engineer to provide technical support for marine construction and offshore projects. The ideal candidate will be responsible for reviewing designs, preparing technical documentation, coordinating with engineering teams, and ensuring that project activities comply with specifications, codes, and client requirements. Key Responsibilities: • Review and interpret engineering drawings, specifications, and technical documents for marine construction projects • Prepare technical submittals including method statements, calculations, and material specifications • Coordinate with design engineers, project managers, and site teams to resolve technical issues • Ensure all technical activities comply with project specifications, international codes (ISO, BS, ASTM, API), and client requirements • Assist in preparing and reviewing shop drawings, as-built drawings, and technical reports • Provide technical support during construction, installation, and commissioning phases • Conduct technical inspections and quality checks to verify compliance with approved documents • Liaise with clients, consultants, subcontractors, and suppliers on technical matters • Review and approve subcontractor technical submittals and material approvals • Prepare technical queries (TQs) and coordinate with consultants for resolution • Support procurement team in technical evaluation of suppliers and materials • Maintain accurate technical documentation and filing systems • Assist in preparing project close-out reports and technical handover documents • Stay updated on latest engineering standards, technologies, and industry best practices • Provide training and guidance to junior engineers and site staff</p><p>Qualifications & Experience: • Bachelor's degree in Civil Engineering, Mechanical Engineering, Marine Engineering, or related field • Minimum 5+ years of experience as Technical Engineer in marine, construction, or oil & gas industries • Strong knowledge of engineering principles, codes, and standards (ISO, BS, ASTM, API, etc.) • Experience with marine construction, piling, subsea pipelines, or offshore structures is highly preferred • Proficiency in engineering software such as AutoCAD, STAAD Pro, or similar • Familiarity with project documentation and technical submittal processes • Strong understanding of quality assurance and quality control (QAQC) principles • Valid safety certifications (NEBOSH, IOSH, OSHA) preferred • Fluency in English; Arabic or Hindi/Urdu is a plus • Professional membership (e.g., ICE, IMarEST) is an advantage Required Skills: • Strong technical knowledge and analytical abilities • Good communication and coordination skills • Attention to detail for documentation and compliance • Problem-solving and technical troubleshooting skills • Ability to work under pressure and meet deadlines • Team collaboration with engineering, procurement, and construction teams</p>

<p>About the Role: We are seeking a skilled Technical Engineer to provide technical support for marine construction and offshore projects. The ideal candidate will be responsible for reviewing designs, preparing technical documentation, coordinating with engineering teams, and ensuring that project activities comply with specifications, codes, and client requirements. Key Responsibilities: • Review and interpret engineering drawings, specifications, and technical documents for marine construction projects • Prepare technical submittals including method statements, calculations, and material specifications • Coordinate with design engineers, project managers, and site teams to resolve technical issues • Ensure all technical activities comply with project specifications, international codes (ISO, BS, ASTM, API), and client requirements • Assist in preparing and reviewing shop drawings, as-built drawings, and technical reports • Provide technical support during construction, installation, and commissioning phases • Conduct technical inspections and quality checks to verify compliance with approved documents • Liaise with clients, consultants, subcontractors, and suppliers on technical matters • Review and approve subcontractor technical submittals and material approvals • Prepare technical queries (TQs) and coordinate with consultants for resolution • Support procurement team in technical evaluation of suppliers and materials • Maintain accurate technical documentation and filing systems • Assist in preparing project close-out reports and technical handover documents • Stay updated on latest engineering standards, technologies, and industry best practices • Provide training and guidance to junior engineers and site staff</p><p>Qualifications & Experience: • Bachelor's degree in Civil Engineering, Mechanical Engineering, Marine Engineering, or related field • Minimum 5+ years of experience as Technical Engineer in marine, construction, or oil & gas industries • Strong knowledge of engineering principles, codes, and standards (ISO, BS, ASTM, API, etc.) • Experience with marine construction, piling, subsea pipelines, or offshore structures is highly preferred • Proficiency in engineering software such as AutoCAD, STAAD Pro, or similar • Familiarity with project documentation and technical submittal processes • Strong understanding of quality assurance and quality control (QAQC) principles • Valid safety certifications (NEBOSH, IOSH, OSHA) preferred • Fluency in English; Arabic or Hindi/Urdu is a plus • Professional membership (e.g., ICE, IMarEST) is an advantage Required Skills: • Strong technical knowledge and analytical abilities • Good communication and coordination skills • Attention to detail for documentation and compliance • Problem-solving and technical troubleshooting skills • Ability to work under pressure and meet deadlines • Team collaboration with engineering, procurement, and construction teams</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Inspector shall have a demonstrated knowledge of ASME Sec. II, V, IX, VIII, ASME B31.3, 31.4, 31.8, API 620, API 1104, API 650 &amp; AWS D1.1, etc. Experience in Oil &amp; Gas Brownfield EPC Projects Knowledge and exp. in Interpretation of RT Films, NDT, Preparation of New WPS &amp; PQR, Welder test, Review of Inspection Test Plan (ITP) &amp; procedures, specifications, etc. related to brownfield projects. Knowledge of Client standards such as KOC, JO, Shell, etc.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>1. Diploma/ Degree in Mechanical Engineering.<br>2. Inspector shall be Certified as an American Welding Society CWI/ CSWIP certified Welding Inspector and NACE/BGAS Level II.<br>3. Minimum 4years of gulf experience required in oil &amp; gas sector<br>4. Relevant Client approval (Oil Companies) is mandatory.<br>5. 10 years of relevant industrial experience in Oil &amp; Gas</p><p></p></section>