Fire Fighting EngineerJobs

<p>HVAC engineer wanted, experience in executing projects in the State of Kuwait, a Kuwaiti driver's license, and a transferable residence permit are required. Send your CV to the email address. / Email</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Mechanical Engineer ensures the safety, efficiency, and continuous operation of a facility’s water, sanitation, and fire suppression systems. They conduct routine inspections, manage preventive maintenance schedules, troubleshoot system failures, and ensure full compliance with international safety standards and local regulations.</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Responsibilities:</p><ul><li>Lead preventive and corrective maintenance (PM/CM) operations on plumbing and fire protection systems.</li><li>Troubleshoot faults, leaks, or pressure drops in domestic water, drainage, sewage, and firefighting systems.</li><li>Oversee the servicing of fire pumps, hydrants, standpipes, wet/dry risers, and sprinkler or clean-agent suppression systems.</li><li>Ensure all building operations comply with NFPA, local fire department mandates, and international plumbing codes.</li><li>Regularly audit, test, and recertify backflow preventers, fire alarms, and fire-rated barriers.</li><li>Conduct fire risk assessments and develop mitigation strategies for existing facility structures.</li><li>Supervise on-site technicians and review the performance of external maintenance contractors.</li><li>Evaluate proposed modifications or retrofits and write clear technical specifications for vendor procurement.</li><li>Candidates must be bilingual.</li><li>Should have a valid Kuwait Driving License.</li><li>Bachelor of Mechanical Engineering Degree.</li><li>Required minimum <b>10 years of experience</b> in the related field.&nbsp;</li></ul><p><br></p><p><br></p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Role &amp; responsibilities</b> 1. Design Review and Enhancement: Evaluate and enhance mechanical designs to ensure compliance with industry standards and project requirements. Provide technical expertise in HVAC equipment design and selection, offering optimization and efficiency improvement suggestions. 2. Systems Knowledge: Possess in-depth knowledge of HVAC systems, fire-fighting pump selection, and understanding of LPG, water, and drainage systems. Demonstrate proficiency in selecting and integrating HVAC equipment into project designs. 3. Statutory Compliance: Stay abreast of and ensure compliance with local regulations and statutory requirements related to HVAC, LPG, water, and drainage systems. Advise project teams on regulatory considerations and necessary adjustments to maintain compliance. 5. Maintenance Expertise: Exhibit knowledge and experience in maintaining HVAC equipment, providing valuable insights for optimal performance and longevity. 6. Consultant and Contractor Collaboration: Have a comprehensive background working in consultancy, contributing to developing and refining project designs. Collaborate effectively with contractors, offering technical support and guidance during project implementation. 7 . Site Evaluation: Oversee site evaluations, providing instructions to on-site engineers and addressing any issues. Ensure that project specifications are met during the evaluation/supervision phase.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>4. Experience: Bring a wealth of experience exceeding 5 years in mechanical engineering, focusing on HVAC systems and related disciplines.</p><p>Bachelors degree in mechanical engineering. work experience in consultancy and contracting firms.</p><p></p></section>

<p><b>Role: MEP Engineer</b></p><p>Industry Type: Oil &amp; Gas</p><p>Department: Construction &amp; Site Engineering</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Construction Engineering</p><p>Education</p><p>UG: B.Tech / B.E. in Mechanical Engineering, Electrical</p>

<p>Erection Engineer</p><p>&nbsp;</p><p>Bachelor Degree in Electrical Engineering according to Kuwait Bachelor Standard. Atleast 4 Years</p><p>7 Years of Minimum Experience</p><p>&nbsp;</p><p>Key Responsibilities</p><p>Shall have experience in installation of Indoor Gas Insulated Switchgear Substation Projects with exposure of 132KV to 400KV voltage level.&nbsp; Responsible to supervise all the activities at Substation as per Client’s requirement, in concern to complying project task with quality and under required safety measures.&nbsp;&nbsp;</p><p>&nbsp;</p><p>To coordinate with various Sub-contractors like civil, Fire-fighting &amp; HVAC works and to resolve arising site issues.&nbsp;&nbsp;</p><p>&nbsp;</p><p>Shall have good communication skills and knowledge to review all construction drawings, interfacing layouts and all other necessary drawings required for execution of works.</p><p>&nbsp;</p><p>Familiar to review BOMs, Quality plans and to maintain documentation like daily reports, preparation of work schedule, manpower record, material requisition etc.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Shall have experience in installation of Indoor Gas Insulated Switchgear Substation Projects with exposure of 132KV to 400KV voltage level. Responsible to supervise all the activities at Substation as per Client’s requirement, in concern to complying project task with quality and under required safety measures. To coordinate with various Sub-contractors like civil, Fire-fighting &amp; HVAC works and to resolve arising site issues. Shall have good communication skills and knowledge to review all construction drawings, interfacing layouts and all other necessary drawings required for execution of works. Familiar to review BOMs, Quality plans and to maintain documentation like daily reports, preparation of work schedule, manpower record, material requisition etc. </p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Minimum experience required: 7 years</p><p>4 Years BE / BTech degree in Electrical Engineering</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible to supervise all the activities at Substation as per Clients requirement, in concern to complying project task with quality and under required safety measures. To coordinate with various Sub-contractors like civil, Fire-fighting &amp; HAVC works and to resolve arising site issues. Shall have good communication skill and knowledge to review all construction drawings, interfacing layouts and all other necessary drawings required for execution of works. Familiar to review BOMs, Quality plans and to maintain documentation like daily reports, preparation of work schedule, manpower record, materials requisition etc.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>BE / Btech in Electrical Enigneering with minimum 7 years of experience. Shall have experience in installation of indoor Gas insulated Switchgear substation Projects with exposure of 132KV to 400 KV voltage level.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b><u>Duties &amp; Responsibilities included but not limited to:</u></b></p><p><b><u>&nbsp;</u></b></p><ul><li>Assign, supervise, review, and participate in the work of the team that is responsible for the maintenance of HVAC / Fire Fighting / electrical/ Mechanical / MHE’s / Civil works</li><li>Monitor and control parts supplies and equipment as required</li><li>Assist the technical team in analyzing and solving problems</li><li>Organize planned preventive and corrective maintenance of all trades</li><li>Monitor all work activities and ensure compliance with the company policies and procedures, and safety protocols</li><li>Coordinate with clients, suppliers, contractors, subcontractors, etc</li><li>Coordinate with team, follow up and respond to the emails.</li><li>Prepare all necessary documents and statement, technical proposal to ensure smooth transition of works</li><li>Submit update schedules of project status, etc.</li><li>Prepare report related to the project status.</li><li>Manage budgeting and costing for each specific facilities management function.</li><li>Create and manage a system for material procurement, storage, and dispatch based on bar code scanning and software</li><li>Negotiate contracts with clients and vendors.</li><li>Supervise all facilities staff and external contractors</li><li>Manage budgeting and costing for each specific facilities management function</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Advanced knowledge of Microsoft Office Suite - Word, Excel, PowerPoint, Outlook, etc</p><p>• Technical report writing skills</p><p>• Background in technical/engineering operations and facilities management best practices</p><p>• Knowledge of basic accounting and finance principles, and experience in controlling cost, labor, material, equipment, etc</p><p>• Leadership and management skills</p><p>• Technical report writing skills</p><p>• Technical background</p><p>• Highly analytical, and able to make well-informed and timely decisions</p><p>• Excellent client management skills</p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a dynamic and result-oriented Fire protection Engineer to drive business growth for our Fire Protection and Fire &amp; Gas (F&amp;G) Engineering Consultancy services. The successful candidate will be responsible for identifying new business opportunities, developing client relationships, preparing technical and commercial proposals, and converting opportunities into awarded projects across the Oil &amp; Gas, Petrochemical, Industrial, Power, Infrastructure, and Commercial sectors.</p><p>Identify and develop new business opportunities for Fire Protection and Fire &amp; Gas Engineering Consultancy services.</p><p>Develop and maintain a database of End Clients, EPC Contractors, PMC Consultants, and Industrial Customers.</p><p>Generate qualified leads through market research, networking, industry events, and client engagement.</p><p>Build strong relationships with key decision-makers within client organizations.</p><p>Conduct client meetings to understand project requirements and identify engineering consultancy opportunities.</p><p>Deliver technical and business presentations showcasing the company's capabilities and value proposition.</p><p>Coordinate with the engineering team to develop technical solutions and commercial proposals.</p><p>Prepare, submit, and negotiate technical and commercial proposals.</p><p>Follow up on submitted proposals and actively drive opportunities through to Purchase Order (PO) award.</p><p>Maintain an opportunity pipeline and provide regular sales forecasts and progress reports.</p><p>Monitor market trends, competitor activities, and upcoming projects.</p><p>Support prequalification submissions, vendor registrations, and framework agreements.</p><p>Participate in exhibitions, conferences, and industry networking events to enhance business visibility.</p><p>Business Development</p><p>Technical Sales</p><p>Client Relationship Management</p><p>Proposal Preparation</p><p>Lead Generation</p><p>Tender Management</p><p>Presentation Skills</p><p>Negotiation Skills</p><p>Market Intelligence</p><p>Strategic Planning</p><p>Number of new clients developed.</p><p>Number of qualified opportunities generated.</p><p>Value of proposals submitted.</p><p>Proposal-to-order conversion rate.</p><p>Annual sales/revenue achieved.</p><p>Customer satisfaction and retention.</p><p>Growth of key accounts and repeat business.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's Degree in Mechanical, Fire Protection, Instrumentation, Electrical Engineering, or a related discipline.</li><li>10+ years of experience in business development, sales, or technical marketing within Fire Protection, Fire &amp; Gas Consultancy.</li><li>Experience in Oil &amp; Gas, Petrochemical, Industrial, Power, Infrastructure, or Commercial projects.</li><li>Knowledge of Fire Protection Systems, Fire Detection &amp; Alarm Systems, Gas Detection Systems, Passive Fire Protection.</li><li>Experience in the field of Sales and business development in Fire Protection and Fire &amp; Gas detection system Vendors in Kuwait</li><li>Familiarity with NFPA, API, IEC, FM, ISO, and client standards (e.g., KNPC, KOC and Other industrial clients) is an advantage.</li><li>Proven experience in proposal preparation, client presentations, and contract negotiations.</li><li>Excellent communication, presentation, negotiation, and interpersonal skills.</li><li>Proficiency in Microsoft Office (Word, Excel, PowerPoint, Outlook);</li><li>Valid Kuwait driving license is preferred.</li></ul><p></p></section>

<p>Familiar with and knowledgeable in Permit to Work (PTW) systems applicable to Oil &amp; Gas operations. Responsible for overseeing and executing all field instrumentation activities (Fire Alarm, Gas Detection, and Fire Suppression Systems and Load shifting), including installation, testing, pre-commissioning, and commissioning during the construction phase. Verify that all activities are carried out in compliance with IFC drawings, approved method statements, and Inspection Test Plans (ITPs). Supervise instrumentation works such as cable pulling, cable termination, tubing installation, junction box installation, and panel wiring activities. Coordinate and assign daily work activities to subcontractors and submit daily progress reports to the Engineer. Ensure the safe installation, testing, and commissioning of instrumentation and control systems, including field devices, control panels, junction boxes, and cabling, in accordance with approved drawings and project specifications. Ensure proper segregation and routing of signal, control, and power cables during installation. Witness and support functional testing, loop checking, and pre-commissioning activities in coordination with QA/QC and commissioning teams. Assist in the preparation, tracking, and closure of punch list items arising from inspections, pre-commissioning, and commissioning activities. Maintain red-line mark-up drawings and support the design team during as-built documentation, loop folders, and handover dossiers. Coordinate closely with electrical, mechanical, and process disciplines to ensure smooth execution of multidisciplinary activities. Work in collaboration with the commissioning team to plan and execute system energization and loop testing activities. Ability to Supervise the load shifting of DCS, ESD. Liaise with client representatives to facilitate inspections, obtain approvals, and provide progress updates.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>To be responsible for the execution, supervision, and technical coordination of electrical works on site, ensuring compliance with contract specifications, approved drawings, and applicable codes (NFPA/IEC/local authority requirements as applicable to KNPC-regulated projects). The candidate will coordinate with the Project Manager, subcontractors, and Client/Consultant representatives to ensure timely execution, quality control, and adherence to safety standards.</p><p><br></p><p><b>Experience:</b> Minimum 10 years' relevant experience in electrical engineering, preferably within MEP/construction contracting environment</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Bachelor's degree in Electrical Engineering</li><li>Minimum 10 years' experience in electrical works within oil &amp; gas, industrial, or institutional construction projects</li><li>Prior experience with KNPC or similar authority-regulated projects preferred</li><li>Hands-on experience in fire alarm systems installation, testing, and commissioning</li><li>Strong knowledge of power distribution, lighting, cabling, and electrical systems installation, testing, and commissioning</li><li>Familiarity with NFPA and local fire authority (Kuwait Fire Force) requirements</li><li>Experience in shop drawing review, material submittals, and as-built documentation</li><li>Professional command of English (spoken and written) for technical correspondence and reporting</li><li>Valid Kuwait driving license and transferable residency</li><li>Ability to work full-time on-site on a daily basis</li></ul><p><br></p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">Ensure the health, safety, and environmental (HSE) compliance of maritime &amp; cargo operations. Oversee everything from heavy crane operations &amp; hazardous material handling. Inspect marine vessels, port jetties heavy lifting gear to ensure SWL limits<br> <br> <p> <b>Required Candidate profile</b> </p>Functional safety, hazard identification (HAZID)&amp; knowledge of port yard &amp; stevedoring operations. B.E (Mechanical, Marine, or Industrial) combined with specialized HSE or fire safety qualifications</div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul><li><span>Familiar with and knowledgeable in Permit to Work (PTW) systems applicable to Oil &amp; Gas operations.</span></li><li><span>Responsible for overseeing and executing all field instrumentation activities (Fire Alarm, Gas Detection, and Fire Suppression Systems and Load shifting), including installation, testing, pre-commissioning, and commissioning during the construction phase.</span></li><li><span>Verify that all activities are carried out in compliance with IFC drawings, approved method statements, and Inspection Test Plans (ITPs).</span></li><li><span>Supervise instrumentation works such as cable pulling, cable termination, tubing installation, junction box installation, and panel wiring activities.</span></li><li><span>Coordinate and assign daily work activities to subcontractors and submit daily progress reports to the Engineer.</span></li><li><span>Ensure the safe installation, testing, and commissioning of instrumentation and control systems, including field devices, control panels, junction boxes, and cabling, in accordance with approved drawings and project specifications.</span></li><li><span>Ensure proper segregation and routing of signal, control, and power cables during installation.</span></li><li><span>Witness and support functional testing, loop checking, and pre-commissioning activities in coordination with QA/QC and commissioning teams.</span></li><li><span>Assist in the preparation, tracking, and closure of punch list items arising from inspections, pre-commissioning, and commissioning activities.</span></li><li><span>Maintain red-line mark-up drawings and support the design team during as-built documentation, loop folders, and handover dossiers.</span></li><li><span>Coordinate closely with electrical, mechanical, and process disciplines to ensure smooth execution of multidisciplinary activities.</span></li><li><span>Work in collaboration with the commissioning team to plan and execute system energization and loop testing activities.</span></li><li><span>Ability to Supervise the load shifting of DCS, ESD.</span></li><li><span>Liaise with client representatives to facilitate inspections, obtain approvals, and provide progress updates.&nbsp;</span></li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Requirements &amp; Responsibilities:</p><ul><li>Secondary School completion with <b>IFSAC / PRO-BOARDS / JOIFF Certification (or Equivalent) Firefighter II (Advanced Exterior, Interior Structural).</b></li><li>Minimum <b>6 years of practical experience</b> in a similar trade. Oil &amp; Gas experience will be an added advantage.</li><li>Serves as a member of firefighting and control crew operating in case of fire or emergency in assigned areas. Works under conditions of extreme personal hazards at any location within facility jurisdiction.</li><li>Ability to operate fixed fire protection systems via electrical/mechanical means.</li><li>Control breathing, use SCBA in limited visibility conditions, replace SCBA air cylinders, use SCBA to exit through restricted passages, initiate and complete emergency procedures in the event of SCBA failure or air depletion, and complete donning procedures.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Ability to operate charged hose lines of <b>63 mm (2 ½ in.) diameter or larger</b>; couple and uncouple various handline connections; carry hose; attack fires; and locate and suppress hidden fires.</li><li>Ability to prepare a foam concentrate supply for use and assemble foam stream components.</li><li>Ability to operate a special agent supply system (example: <b>Hydro-Chem operations</b>).</li><li>Understanding of different types of alarms, implementing the appropriate response, and providing information through communications.</li><li>Ability to operate disentanglement tools, initiate protective measures, identify and eliminate points of entrapment, and maintain incident stability and scene safety (Vehicle rescue).</li><li>Ability to identify entry and exit points and probable victim locations, and assess and evaluate the impact of vehicle stability on the incident (Vehicle rescue).</li><li>Fluent in written and spoken <b>English</b>. Arabic will be an added advantage.</li><li>Physically and mentally fit for the job.</li><li>Ready to work in <b>rotating shifts</b>.&nbsp;</li></ul><p><br></p></div>

Job description:<br><br> What you will be doing Understand the project requirements, scope of work, project delivery schedule, project deliverables, etc. Develop a thorough understanding of client design requirements prior to the commencement of designproject. Coordinate with the Lead / Senior ELV Engineer for further clarifications on design requirements. Share the heat dissipation calculation with the Lead/Senior ELV Engineer. Revise the report based on client’s comments (if required). Share the electrical load requirements with the Lead/Senior ELV Engineer. Review data collection drawings / documents about the existing utilities around the project. Respond to site RFIs related to design. Review the drawings prepared by the modelers and ensure that all the client’s and authorities’requirements are respected. Also ensure that all the contractual obligations are followed. Maintain continuous quality control on all drawings produced under the section, ensuring that they adhereto PACE quality and CAD standards (e.g., high standards of visual presentation, error free, properlydimensioned, x-referenced etc.) Ensure that ELV Model is shared every Thursday as per Pace protocol with all the discipline working on theproject for coordination. Coordinate the major space requirements for the ELV services such as but not limited to MOC Room, Main Server Room, Security Control Room, IDF rooms, etc. with the project Architects. Assist in conducing site surveys (as and when required) to investigate the layout of existing ELV systemsprior to design. Assist on site ELV engineers by responding to technical queries which they raise. Attend project coordination workshops, and site visits during the project design and implement theoutcome of the same in the design. Based on the approved concept design, prepare the scheme for the ELV services for the project. Brief the same to the ELV Modelers and guide them for modelling the ELV services for the project. Based on the received information’s prepare the design and layout plans for ELV systems. Coordinate with HVAC Engineer for smoke zones used in the project and ensure that the Fire Alarm Zoneare in line with the smoke zones. Coordinate with team members effectively to ensure that all projects progress as planned in order not tocause project delays or budget over runs. Coordinate with the Architects and receive the area schedules and other project information. Ensure all the project deliverables are fulfilled during the different project submission stages. Prepare calculations and electrical load requirement for the ELV Systems. Prepare concept narrative report. Coordinate with Architects for the ELV services space requirements in the project. Assist site staff in verifying sample materials submitted by contractors (as and when required) to ensurecompliance against ministerial requirements and specifications. Attend site visit as required. Required Experience 5+ years Experience in designing ELV Systems. Awareness of Local and International Guidelines/ Codes/ Regulations for ELV Systems. Knowledge of Local and International codes such as KFF (local civil defence), GCC codes & regulations and NFPA. Knowledge of building managment system design Full knowledge of preparation of technical specification for ELV systems. Basic Knowledge in Auto CAD and Revit. Previous experience in value engineering study to ELV systems. Experience in handling multiple projects simultaneously in a similar environment. Working knowledge of MS Office. Cad, Revit software. Possess regional experience in design of ELV system. Previous experience shall include design of ELV system for Mega Projects of different categories such as Mixed Use Development, Educational buildings, Health Care, Hotel, Sport Facilities, Neighbourhoods, High Rise buildings, etc. Shall be capable of providing project presentations to client and authorities. Education Bachelor's degree in Electrical Engineering or equivalent. Professional certification or relevant ELV certifications will be an advantage. Certifications & Memberships Kuwait Society of Engineers (KSE) Membership or Any local Engineer's society membership (for hiring outside Kuwait). Any Certifications related to ELV systems. Training or course certificates from ELV Manufacturers. Essential Skills Experience of managing teams efficiently in a similar environment and on multiple projects. Proven record of interpersonal skills such as client interaction, he must be a strong team player skill and shall haveability to work pleasantly with a diverse work force. Track record in multitasking and shall have proven decision making ability. Good Internal and external communication skill such as ability to handle internal project coordination meeting with alldisciplines, dealing with authorities, presentation to clients, etc. Proven track record of the ability to express innovative ideas. Demonstrated experience in excellent communication skills both verbal and written. Demonstrated problem solving skills in previous roles and projects. Project Management experience. <br><br>Profile description:<br><br> About the Role Designing ELV Systems for various projects, and handle projects from the irinitiation to closure, and shall ensure adherence to the project deadlines and quality requirements in order to fulfill clientrequirements. Extra Low Voltage Engineers are responsible for ensuring that the Structured Cabling System, Converged Network System, Security System, Fire Alarm and Voice Evacuation System, IPTV and Digital Signage System, AV PA Systemetc. design of the project is in line with all the relevant authorities’ requirements and satisfying the contractual obligations.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Project Engineer I - Buildings Projects<br><br><br><br><br><p><b>Job Title </b></p><br><br><br><p><b><i>Project Engineer I- Buildings Projects</i></b></p><br><br><br><p><b>Division /Project </b></p><br><br><br><p>KBR's Sustainable Technology Solutions (STS) group is seeking a <b>Project Engineer I – Building &amp; Office Tower Projects</b> to support the planning, design, procurement, construction, and commissioning of office towers, administration buildings, control centers, and associated facility infrastructure under PMC contracts.</p><br><br><br><p><b>Primary Objectives</b></p><br><br><ul><li>Management of support services for supervising and directing engineering, procurement and management of construction contractors appointed by the Client.</li><li>Ensure the successful delivery of projects through all phases, including concept design, FEED, detailed engineering, tendering, construction, commissioning, and handover.</li><li>Act as primary technical coordination interface with client to ensure that the client’s expectations are satisfied.</li></ul><ul><li>Ensure the project conforms to the client’s approved Basis of Design and local authority requirements, building regulations, sustainability objectives, and applicable international codes and standards.</li></ul><ul><li>Coordinate architectural, structural, MEP, fire protection, security, ICT, vertical transportation, and interior fit-out disciplines to achieve an integrated design solution</li></ul><br><p><b>Responsibilities</b></p><br><br><ul><li>Support project mobilization, setup, takeover, and handover activities</li><li>Set-up, take over / hand over of projects</li><li>Establish clear objectives and deliverables for design consultants and engineering teams</li><li>Management of PMC’s engineering teams during FEED, Prepare and review scopes of work, technical specifications, employer requirements, and tender documentation</li><li>Compilation of the of scope of work documents, technical part of Invitation to Bid documents and the documentation of Project Milestone Reviews</li><li>Coordination of reviews and comments on engineering and other technical deliverables of 3rd party companies like P&amp;IDs, line lists, equipment datasheets, instrumentation index, cable routing, etc. within the agreed review time.</li><li>Ensures compliance with all applicable project standards and specifications</li><li>Ensures proper compilation and updating of as-built documents, redlines, MTOs, loop folders and commissioning binders and handover documentation.</li><li>Ensures the delivery of the as built (End of Job) documentation to the client in time and good quality</li><li>Contribution to the development of overall project schedule.</li><li>Ensures work progress as per approved schedule in close cooperation with Project Controls Team</li><li>Set up and regularly maintaining a project dashboard in close cooperation with Project Controls Team</li><li>Monitors with support of the Project Controls Team cost aspects of the project within direct control to forecast final costs, trends and takes action to avoid cost overruns.</li><li>Evaluation of Earned Value / value of work for project completion with support of the Project Controls Team</li><li>Builds and maintains a healthy relationship with clients and acts as project focal point for the client</li><li>Proactively resolves scope and schedule issues with the 3rd party contractor as they arise.</li><li>Knows the contract between the FEED- or EPC-Contractor and between the Client and 3rd party contracts.</li><li>Knowing the PMC Contract between KBR and the Client</li><li>Ensures Change Order recording and participation from project team in technical parts of change order assessment</li><li>Regularly provides input to project reports to internal Project Management and the Clients</li><li>Assessment and feedback of third-party contractor’s project reports</li><li>Defines and communicates team’s priorities such as achievement of milestones and other key project objectives.</li><li>Listens to the team, discusses the issues, resolves problems and directs activities to remove roadblocks and achieve objectives.</li><li>Effective communication with the design and engineering teams (inside PMC and third parties) and other project stakeholders like operations, maintenance etc.</li><li>Regularly chairs and records project team meetings within the PMC organisation and with the client and with the 3rd party contractors or consultants.</li><li>Responsibility for preparation and status tracking of all projects related correspondence and transmittals / project documents.</li><li>Perform together with relevant discipline engineers technical bid evaluations (TBE) and award recommendations</li><li>Participates or delegates participation of discipline engineers in Factory and Site Acceptance Tests</li></ul><br><p><b>Qualifications including Required Education, Experience, &amp; Skills</b></p><br><br><ul><li><span>B. Sc. Eng from an accredited college or university.</span></li></ul><br><ul><li><span>Minimum 15 years post-graduation total experience</span></li></ul><br><ul><li><span>10 years minimum experience post qualification in infrastructure, buildings projects</span></li></ul><br><ul><li><span>5 years of minimum experience in a Senior Project Engineer/Project Manager role</span></li></ul><br><ul><li><span>Must have demonstrated ability of effective functioning in a multi-cultural environment, preferably in the Middle East.</span></li></ul><br><b>Essential skills/experience</b><ul><li>Project planning and execution.</li><li>Multidisciplinary design coordination.</li><li>Commercial and contract awareness.</li><li>Construction and commissioning management.</li><li>Stakeholder engagement and client management.</li><li>Problem-solving and decision-making.</li><li>Strong written and verbal communication skills.</li><li>Presentation and reporting skills.</li><li>Leadership and team coordination.</li><li>Risk management and change control.</li><li>Proficiency with project management and BIM platforms.</li><li>Analysis and problems solving</li><li>Creativity/innovation</li><li>Communications, written and oral.</li><li>Ability to influence and persuade.</li></ul><br><p><b>Decarbonization – Energy Transition – Sustainability </b></p><br><br><p><b>Belong. Connect. Grow. with KBR! </b></p><br><br><br><br><br> </div>

Building on our past. Ready for the future<br><br>Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We’re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.<br><br>Primary Objective<br><br>To coordinate implementation of the KOC PMC Safety policies, HSE Management System and Project specific HSE. Management Plans as they apply to the project. Ensure that the site complies with the relevant HSE Legislation and KOC HSE requirements. Develop and implement the project HSE MS. Develop and maintain Statistical data for the Project. Prepare reports as required for the Worley Parsons KOC PMC HSEQ Manager. Position Reports to: HSE / QA / QC Manager.<br><br>Specific Accountabilities<br><br>Monitor the EPC contractor HSE Management System and provide advice and assistance to EPC HSE managers so they comply in a consistent way to reduce the risk to the project employees and the environment. Ensure the EPC contractors develop implement and maintain a specific project Risk Management Plan. Ensure EPC contractor subcontractor selection (ITB) processes are developed and implemented on a timely basis in accordance with KOC expectations. Provide advice and guidance to the EPC contractor management team on HSE issues through the interpretation of KOC policies and statutory requirements. Ensure EPC contractors establish and maintain statistical data concerning all matters of health and safety, training programs with which to provide a basis for development of further health and safety activities, to highlight trends for future action. Monitor compliance with all Kuwait legislative requirements including the dissemination of information to PMC and EPC managers and employees regarding amendments/ additions to requirements as they come into effect. Review EPC contractor Safety Management System and advise of required changes. Develop and maintain professional relationships with KOC, regulatory bodies and EPC contractor to foster the professional image of Worley Parsons. Visit the project site on a regular basis to ensure interest and awareness of HSE is maintained, conduct regular safety talks and safety training sessions relative to the nature of activities being undertaken. Other key activities shall include but not be limited to the following:Pro-actively visit site and with the EPC contractor implement safety measures- promote/ensure safe work practices. Ensure quality safety observation program is implemented and maintained on each site/project and ensure follow up on findings. Assist EPC contractor construction management personnel in identifying hazards and in planning and organizing the work such that a safe working environment is maintained. Assist EPC sub-contractor Safety advisors and site management in the development and revision of specific site safety programmers. Maintain a HS&E audit and assessment program for the location. Carry out regular inspections of the work areas with the respective EPC contractor line manager and or HSE representative and prepare reports. Disseminate safety information throughout the workplace via bulletin boards, posters, newsletters etc. Assist EPC contractor line management and or construction supervisors in accident investigation process and report accordingly. Develop and implement safety initiatives to continually improve, achieve and maintain stated safety performance and objectives. Ensure HSE safety inductions are undertaken in accordance with the EPC contractor SMS requirements for all new employees of the company and its subcontractors Monitor the availability and use of safety apparel and equipment. Provide advice to the EPC subcontractor supervision on the development of project specific procedures and Job Safety Analysis (JSA) training,Advise subcontractor supervisory staff and employees in the implementation of strategies to identify and control potential hazards and in the use of the hierarchy of controls Ensure all lines of communication on HSE-matters remain open and effective between all parties particularly KOC, Worley Parsons, EPC contractors and their subcontractors.<br><br>Qualification<br><br>Bachelor's degree in engineering (Mechanical, Chemical, Petroleum, Fire & Safety, Environment, Production, Industrial, Electrical, Instrumentation or Civil.) Minimum years total post-graduation experience. Minimum years Oil & Gas post-graduation experience. Minimum years' experience in a Safety /HSE Engineer. Practical experience with HSE management systems, reporting and audit procedures. Ability to develop, update and maintain in – house procedures. Must be conversant with local & international safety standards and norms. Practical experience of design, construction, commissioning and maintenance aspects of oil & gas installations.<br><br>Moving forward together<br><br>We’re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.<br><br>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.<br><br>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.<br><br>Whatever your ambition, there’s a path for you here. And there’s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description<br></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Electrical Engineer</b> in <b>Kuwait</b>. Our client is a reputed organization in the <b>Power Generation</b> sector seeking skilled and motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Maintain and troubleshoot electrical systems in a large-scale power plant.<br></li><li>Perform preventive and corrective maintenance of electrical equipment.<br></li><li>Ensure reliable operation of transformers, switchgear, and motors.<br></li><li>Monitor electrical distribution systems for safe and efficient performance.<br></li><li>Coordinate shutdown and maintenance activities.<br></li><li>Ensure compliance with electrical safety standards and regulations.<br></li><li>Prepare maintenance reports and technical documentation.<br></li><li>Support continuous improvement initiatives for plant reliability.<br></li></ul>Required Skills<br><ul><li>Power Plant Electrical Maintenance – Experience in utility-scale power plants.<br></li><li>High Voltage Systems – Handling HV equipment safely.<br></li><li>Electrical Troubleshooting – Diagnose and resolve electrical faults.<br></li><li>Switchgear &amp; Transformers – Maintenance and operation.<br></li><li>Electrical Safety Standards – Compliance with industrial safety practices.<br></li></ul>Preferred Skills<br><ul><li>Protection Relay Knowledge<br></li><li>SCADA/DCS Exposure<br></li><li>SAP Maintenance Module Experience<br></li></ul>Work Experience Requirements<br><p>Candidates should have a minimum of <b>10 years</b> of experience in electrical maintenance within a large-scale power plant environment. Experience with power generation equipment, high-voltage systems, and industrial maintenance practices is essential.<br></p><br>Education<br><ul><li><b>Minimum:</b> B.E. Electrical<br></li><li><b>Preferred:</b> Master's Degree in Electrical Engineering (Typical)<br></li><li><b>Additional Certifications:</b> Industrial Electrical Safety / HV Switching Certification (Typical)<br></li></ul>Contact Number - 9786888866<br><br><br> </div>

<p>Job Purpose The Data Center Mechanical Engineer owns the mechanical and cooling infrastructure of the data center at engineering level, from the central cooling plant through to the data hall cooling environment. The role is responsible for mechanical maintenance strategy, system reliability, operational procedures, environmental performance, vendor management, safety compliance, spare-parts planning, and emergency response. The Mechanical Engineer directs the Mechanical Manning Technicians, authorizes equipment changeovers and critical maintenance activities, approves mechanical procedures, and acts as the mechanical technical authority during incidents and operational escalations.</p><p>Key Responsibilities and Areas of Ownership</p><ul><li>Take engineering ownership of the data center mechanical and cooling infrastructure, including chillers, cooling towers, chilled-water pumps, condenser-water pumps, heat exchangers, CRAH units, CRAC units, AHUs, ventilation systems, fans, filters, coils, valves, actuators, piping systems, and associated controls.</li><li>Manage the operation, reliability, and performance of chilled-water and precision-cooling systems serving the data halls and supporting areas.</li><li>Own mechanical equipment operating procedures, changeover procedures, start-up and shutdown sequences, and equipment rotation plans.</li><li>Authorize, lead, and supervise critical mechanical activities, including chiller changeovers, pump changeovers, cooling-tower changeovers, isolation activities, system draining, system filling, and restoration of equipment to service.</li><li>Monitor and maintain data hall environmental conditions, including temperature, humidity, airflow, differential pressure, cooling capacity, and equipment loading.</li><li>Review chilled-water supply and return temperatures, water flow, system pressure, differential pressure, valve positions, and system delta-T to identify performance issues and operational risks.</li><li>Manage cooling redundancy and capacity to ensure sufficient cooling remains available during maintenance, equipment failure, testing, or abnormal operating conditions.</li><li>Own the mechanical safety program, including Lockout/Tagout, Permit to Work, risk assessments, safe isolation, refrigerant safety, chemical-handling controls, and compliance with HSE requirements.</li><li>Develop and manage the annual mechanical Planned Preventive Maintenance program in accordance with OEM recommendations, equipment criticality, maintenance history, and operational requirements.</li><li>Prepare, review, approve, and maintain mechanical Standard Operating Procedures, Methods of Procedure, Emergency Operating Procedures, maintenance instructions, risk assessments, and equipment changeover procedures.</li><li>Ensure that all mechanical maintenance activities are planned around available cooling redundancy and executed without compromising data center availability.</li><li>Own vendor coordination for mechanical maintenance activities and supervise OEM major services, equipment overhauls, repairs, inspections, and specialist testing.</li><li>Review vendor method statements, risk assessments, service reports, test results, recommendations, and corrective-action requirements.</li><li>Manage critical spare-parts and inventory planning for chillers, pumps, cooling towers, CRAH and CRAC units, valves, actuators, sensors, filters, belts, bearings, motors, VFDs, and other mechanical systems.</li><li>Analyze cooling-system performance, equipment efficiency, energy consumption, operating trends, alarm history, temperature profiles, water-flow conditions, and equipment loading.</li><li>Identify and implement opportunities to improve cooling efficiency, airflow management, chilled-water performance, equipment sequencing, and overall energy performance without reducing system resilience.</li><li>Investigate mechanical faults, high-temperature conditions, leaks, abnormal vibration, low-flow conditions, low delta-T, equipment trips, control failures, and recurring alarms.</li><li>Lead root cause analysis for mechanical incidents and equipment failures and implement corrective and preventive actions.</li><li>Direct, develop, and train Mechanical Manning Technicians in operational procedures, inspections, first-line maintenance, alarm response, safe isolation, and incident escalation.</li><li>Review technician shift logs, inspection checklists, operating readings, alarm reports, and job-card closure records.</li><li>Support testing and commissioning activities, integrated systems testing, functional performance testing, equipment acceptance, redundancy verification, and operational-readiness activities.</li><li>Support predictive and condition-based maintenance programs, including vibration analysis, oil analysis, refrigerant checks, water and coolant sampling, thermal inspections, leak detection, and equipment-performance trending.</li><li>Manage liquid-cooling systems, Cooling Distribution Units, coolant loops, leak-detection systems, valves, pumps, and associated controls where installed.</li><li>Coordinate water-treatment activities, water-quality monitoring, chemical dosing, sampling, and corrective actions for chilled-water, condenser-water, and liquid-cooling systems where applicable.</li><li>Support WTP, STP, plumbing, drainage, and mechanical fire-protection systems where included within the data center operational scope.</li><li>Coordinate with electrical, BMS, IT, operations, HSE, vendors, and management teams during planned maintenance, incidents, testing, and emergency situations.</li><li>Maintain accurate mechanical documentation, asset records, maintenance reports, operating procedures, equipment histories, incident reports, testing records, and technical drawings.</li><li>Act as the mechanical technical authority during cooling incidents and operational escalations on a 24/7 on-call basis.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Engineer Level</li><li>Bachelor's degree in Mechanical Engineering.</li><li>Minimum of 5 years of mechanical, HVAC, cooling-plant, or critical-facility operations and maintenance experience.</li><li>At least 2 years of experience in a data center or another critical facility where loss of cooling could affect essential operations.</li><li>Demonstrated engineering-level experience with chilled-water systems, precision cooling, or critical HVAC systems.</li><li>Practical knowledge of chillers, pumps, cooling towers, heat exchangers, CRAH units, CRAC units, AHUs, valves, actuators, VFDs, and mechanical controls.</li><li>Experience in managing cooling redundancy, equipment capacity, environmental conditions, and critical maintenance activities in a live operational environment.</li><li>Demonstrated ownership of mechanical maintenance planning, technical procedure writing, incident response, vendor management, and spare-parts planning.</li><li>Experience preparing or approving SOPs, MOPs, EOPs, risk assessments, isolation plans, and maintenance procedures.</li><li>Ability to read and interpret P&amp;IDs, mechanical drawings, equipment schematics, sequence-of-operation documents, control diagrams, and OEM technical manuals.</li><li>Working knowledge of BMS or BAS platforms, mechanical alarms, equipment trends, sensors, control sequences, and environmental monitoring.</li><li>Good understanding of chilled-water temperatures, flow, pressure, differential pressure, delta-T, heat transfer, airflow, humidity, and cooling-capacity principles.</li><li>Experience with root cause analysis, corrective-action planning, and technical incident reporting.</li><li>Familiarity with testing, commissioning, integrated systems testing, and mechanical-system operational-readiness activities.</li><li>Fluent written and spoken English with strong technical reporting and communication skills.</li></ul><p>Other Requirements</p><ul><li>The role is fully on-site within an operational data center environment.</li><li>Availability for 24/7 on-call support is required.</li><li>The employee must be available to support planned shutdowns, emergency maintenance, testing activities, shift coverage, weekends, nights, and public holidays when operationally required.</li><li>The employee must comply with all company, client, data center, HSE, Permit to Work, LOTO, security, and access-control requirements.</li><li>The employee must be able to coordinate effectively with technicians, contractors, OEM vendors, operations teams, IT teams, and other engineering disciplines.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>To prepare accurate cost estimates, quotations, and tender submissions for plumbing and firefighting projects, ensuring competitive pricing and compliance with project requirements.</p><p><br></p><p>Key Responsibilities:</p><p><br></p><ul><li>Review tender documents, drawings, specifications, BOQs, and project requirements.</li><li>Prepare detailed cost estimates for <b>plumbing and firefighting systems</b>.</li><li>Prepare quantity take-offs from drawings and BOQs.</li><li>Calculate material, manpower, equipment, and subcontractor costs.</li><li>Obtain and evaluate quotations from suppliers and subcontractors.</li><li>Prepare RFQs and coordinate with suppliers for competitive prices.</li><li>Analyze project specifications and identify scope of work and exclusions.</li><li>Prepare technical and commercial tender submissions.</li><li>Coordinate with suppliers, subcontractors, engineering, and project teams during the tendering process.</li><li>Identify discrepancies, missing information, and variations in tender documents.</li><li>Ensure estimates are accurate and submitted within the required deadline.</li><li>Assist in preparing value engineering and cost-saving proposals.</li><li>Maintain records of previous estimates, supplier quotations, and project cost data.</li><li>Participate in tender clarification meetings and provide necessary technical/commercial clarifications.</li><li>Follow up on submitted tenders and assist with negotiations when required.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Bachelor's Degree/Diploma in <b>Mechanical Engineering, Plumbing, or a related field</b>.</li><li><b>5–8 years of relevant experience</b> in estimation and tendering, preferably in Kuwait/GCC.</li><li>Strong experience in <b>Plumbing &amp; Firefighting estimation and tendering</b>.</li><li>Good knowledge of MEP drawings, specifications, and BOQs.</li><li>Good knowledge of MS Excel and estimation/tendering software.</li><li>Good communication and negotiation skills.</li></ul><p><br></p><p>Preferred Experience</p><p>Experience in <b>MEP contracting, commercial buildings, residential projects, hospitals, or infrastructure projects</b> will be an advantage.</p></div>