Security Supervisor Jobs in Kuwait

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Kuwait in support of WEXMAC*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Position requires thorough knowledge of engineering design, engineering techniques, exceptional leadership and project managements skills. Responsible to manage the engineering, inspection and surveyors’ teams. Utilize best practice engineering methods and provides expert technical guidance for engineering initiatives. Run all the engineering activities within the organization and make sure these are aligned with the established policies and objectives of Vectrus. Plan and conduct independent work, requiring judgment in the evaluation, selection, application and adaptation of engineering techniques, procedures and criteria. Devise new approaches to problems, and monitor work for compliance to applicable codes, accepted engineering practices, Vectrus Safety Procedures and ASG-KU Standards. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Provide technical guidance to engineering, inspectors and surveyor’s teams + Direct and manage inspections for construction, installation, maintenance, support, documentation, and testing activities to ensure compliance with specifications, codes, operational safety standards and customer requirements. + Review detailed designs. + Provide advice and resolve creatively any emerging problems/deficiencies. + Oversee and mentor staff and liaise with a variety of stakeholders. + Comply with guidelines and regulations including permits, safety etc. and deliver technical files and other technical documentation as required. + Implementing best practice engineering methods. + Inspect completed installations and observe operations, to ensure conformance to design and equipment specifications and compliance with operational and safety standards. + Support establish of organizational objectives by developing goals and strategies. + Compile data and write reports regarding existing and potential civil studies and projects. + Assessing the potential risks of specific projects, as well as undertaking risk management in specialist roles. + Generating Statements of Work and reviewing Subcontractor Technical Proposals for accuracy and acceptance. + Assist and/ or confer with engineers, customers, and others in developing programs for new projects or plan existing major repair projects. + Direct and/or participate in job site visits to collect or deliver design and engineering data. + The analysis for the approval or disapproval in writing of submittals and materials. In case of disapproval, follow-up with the relevant department to reach the correction of the deficiency found. + Shall work special projects as assigned. + Performs other duties and assignments as required. Qualifications + Minimum Education: + BS/MA in a relevant engineering discipline. + Must possess a driver’s license from country of origin for the purpose of obtaining a Military or Kuwait driver’s license. + Experience: + Minimum 10 years’ experience relating to engineering managerial experience. + Five (5) years specialized experience operating managerial activities. + Ability to demonstrate and provide leadership and collaboration in diverse experiences to address operational methodologies in project planning and management and customer service PMP Certification. + Skills: + Knowledge of building mechanical codes, local Host Nation Codes, International Building Code (IBC) + Research UFC, US Army or other codes from standards as required by projects. + Technical competence + Strong numeracy and IT skills + Attention to detail, combined with the ability to oversee small and large projects + Excellent communication and team working skills + Knowledge of relevant legislation + Negotiation and leadership skills + High competency and demonstration of engineering skills. + High level of analytical and research skills translated and clearly expressed in written documents ranging from correspondence, statements of work, white papers and contribution to policy development. + A creative approach to problem-solving + Must be proficient in the use of MS Office (Word, Power Point, Excel and Outlook. + Candidate must possess professional interpersonal skills, as well as the ability to work independently, in a fast-paced environment with changing priorities. + Must have strong organizational and planning skills and manage workflow efficiently and accurately. + Capable of effectively communicating technical information in English, both written and verbal. + Knowledge of sustainable design practices + Physical Requirements + Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. If the use of arm and/or leg controls requires exertion of forces greater than that for sedentary work and the worker sits most of the time, the job is rated for light work. + Visual Acuity + The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. + Working Conditions: + The conditions the worker will be subject to in this position. (Please select all that apply) + The worker is subject to both environmental conditions. Activities occur inside and outside. + The worker is subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. + The worker is subject to vibration. Exposure to oscillating movements of the extremities or whole body. + The worker is subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Kuwait in support of WEXMAC*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Position requires thorough knowledge of engineering design, engineering techniques, exceptional leadership and project managements skills. Responsible to manage the engineering, inspection and surveyors’ teams. Utilize best practice engineering methods and provides expert technical guidance for engineering initiatives. Run all the engineering activities within the organization and make sure these are aligned with the established policies and objectives of Vectrus. Plan and conduct independent work, requiring judgment in the evaluation, selection, application and adaptation of engineering techniques, procedures and criteria. Devise new approaches to problems, and monitor work for compliance to applicable codes, accepted engineering practices, Vectrus Safety Procedures and ASG-KU Standards. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Provide technical guidance to engineering, inspectors and surveyor’s teams + Direct and manage inspections for construction, installation, maintenance, support, documentation, and testing activities to ensure compliance with specifications, codes, operational safety standards and customer requirements. + Review detailed designs. + Provide advice and resolve creatively any emerging problems/deficiencies. + Oversee and mentor staff and liaise with a variety of stakeholders. + Comply with guidelines and regulations including permits, safety etc. and deliver technical files and other technical documentation as required. + Implementing best practice engineering methods. + Inspect completed installations and observe operations, to ensure conformance to design and equipment specifications and compliance with operational and safety standards. + Support establish of organizational objectives by developing goals and strategies. + Compile data and write reports regarding existing and potential civil studies and projects. + Assessing the potential risks of specific projects, as well as undertaking risk management in specialist roles. + Generating Statements of Work and reviewing Subcontractor Technical Proposals for accuracy and acceptance. + Assist and/ or confer with engineers, customers, and others in developing programs for new projects or plan existing major repair projects. + Direct and/or participate in job site visits to collect or deliver design and engineering data. + The analysis for the approval or disapproval in writing of submittals and materials. In case of disapproval, follow-up with the relevant department to reach the correction of the deficiency found. + Shall work special projects as assigned. + Performs other duties and assignments as required. Qualifications + Minimum Education: + BS/MA in a relevant engineering discipline. + Must possess a driver’s license from country of origin for the purpose of obtaining a Military or Kuwait driver’s license. + Experience: + Minimum 10 years’ experience relating to engineering managerial experience. + Five (5) years specialized experience operating managerial activities. + Ability to demonstrate and provide leadership and collaboration in diverse experiences to address operational methodologies in project planning and management and customer service PMP Certification. + Skills: + Knowledge of building mechanical codes, local Host Nation Codes, International Building Code (IBC) + Research UFC, US Army or other codes from standards as required by projects. + Technical competence + Strong numeracy and IT skills + Attention to detail, combined with the ability to oversee small and large projects + Excellent communication and team working skills + Knowledge of relevant legislation + Negotiation and leadership skills + High competency and demonstration of engineering skills. + High level of analytical and research skills translated and clearly expressed in written documents ranging from correspondence, statements of work, white papers and contribution to policy development. + A creative approach to problem-solving + Must be proficient in the use of MS Office (Word, Power Point, Excel and Outlook. + Candidate must possess professional interpersonal skills, as well as the ability to work independently, in a fast-paced environment with changing priorities. + Must have strong organizational and planning skills and manage workflow efficiently and accurately. + Capable of effectively communicating technical information in English, both written and verbal. + Knowledge of sustainable design practices + Physical Requirements: + Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. If the use of arm and/or leg controls requires exertion of forces greater than that for sedentary work and the worker sits most of the time, the job is rated for light work. + Visual Acuity: + The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. + Working Conditions: + The worker is subject to both environmental conditions. Activities occur inside and outside. + The worker is subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. + The worker is subject to vibration. Exposure to oscillating movements of the extremities or whole body. + The worker is subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Kuwait in support of WEXMAC*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The purpose of this job is to perform specialized duty work functions in preparing for and responding to fire/medical emergency calls and providing support for the Advance life support EMT requiring emergency medical care and safely transporting them to the hospital or medical clinic. Duties and responsibilities include maintaining readiness for emergency call response; responding to fire, medical, and related emergency calls when dispatched and taking proper action; educating staff and public on fire safety/prevention; and performing Fire Department activities. Additionally, this position may involve staffing the Fire Alarm Communications Center (FACC) and receiving calls for emergency assistance, monitoring fire alarm systems and emergency reporting phones. and dispatching appropriate apparatus and personnel to emergencies. Performs other duties as assigned. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Responds to emergency calls, provides Support to Paramedic in accordance with EMS protocols, and assists other members of the department. + Provide Support to the Paramedic for immediate care to the critically ill and injured and transports the patient to the designated ambulance transfer + Provide pre ‐ hospital emergency medical care of simple and multiple system + Maintains vehicles and equipment in a serviceable and ready condition. + Participates in continuing medical education (CME) and training activities, both as an instructor and as a student, depending on the nature and purpose of the course. + Communicates effectively in writing, verbally and over the radio or telephone. + Performs various other tasks as assigned by the Fire Chief or designee. + Complies with all applicable rules, regulations/standard operating procedures, as directed By the Fire Chief, Program Manager and Base Commander. + Performs other duties and assignments as needed. Qualifications Minimum Qualifications Education/Certifications : Two years’ related experience may be substituted for one year of education, if degree is required. + + High school diploma or equivalent is required. + An associate’s degree is preferred. + Must be eligible and/or able to obtain and maintain Installation Access + Able to obtain a host nation driver’s license + Required to have IFSAC or Pro-Board Certification to these levels: + National Registry of Emergency Medical Technicians (NREMT) or State EMT + Healthcare Provider CPR/BLS/AED + Firefighter I + Firefighter II + Hazardous Materials Operations + Airport Firefighter + Driver/Operator Pumper + Driver/Operator Aircraft Rescue and Firefighting + Driver/Operator Mobile Water Supply + Telecommunicator I/II Skills: + + Must read, write, and speak English fluently. + Excellent communicative skills, both written &amp; verbal. Experience : + + Must have a minimum of Two years of experience working on an emergency response ambulance. + Must be in good standing with their certifying organization, and they must maintain these certifications for the duration of their employment. + Must have a minimum of 2 years’ experience in emergency health care setting. + Must have a minimum of two years of experience working on an emergency response ambulance. + Safely operate and drive fire department vehicles, including engines, ladder trucks, and other specialized apparatus, to emergency incidents in compliance with all traffic laws and department policies. + Position apparatus at emergency scenes strategically to maximize its effectiveness for fire suppression, rescue operations, and water supply, considering factors like structural stability, collapse zones, and overhead hazards. + Operate fire pumps to supply water at the correct pressure and volume to attack lines, ensuring a continuous and reliable water supply for interior and exterior firefighting crews. + Execute complex hydraulic calculations to account for friction loss, elevation, and appliance requirements, adjusting pump pressures accordingly to meet the demands of the incident. + Deploy and operate aerial devices, such as ladders and platforms, for rescue, elevated water streams, ventilation, and overhaul operations, ensuring the stability and safety of the device at all times. + Establish a secure and uninterrupted water supply by connecting to fire hydrants, drafting from static sources (lakes, pools, rivers), or coordinating water shuttle/tanker operations. + Conduct daily, weekly, and monthly inspections and operational readiness checks on assigned apparatus, including engine systems, pumps, aerial devices, fluid levels, and onboard equipment. + Excellent communicative skills, both written &amp; verbal. + Extensive Fire Fighting and Emergency Service Experience. (5 Years) + Possess knowledge of safety and environmental issues. + Be familiar with various Computerized Maintenance Management Systems (CMMS). Working Conditions : + + Must be capable of working in various weather conditions (i.e. humidity, rain/wet season, warm/hot, sunny). + The worker is subject to atmospheric conditions. One or more of the following conditions that affect the respiratory system of the skin: fumes, odors, dust, mist, gases, or poor ventilation. Physical Requirements : + + Driver Operator/Firefighter must have the ability to lift and carry a minimum of 45 lbs. and be able to collectively lift, carry, and balance patients who weigh in excess of 100 lbs. In addition, must have the ability to pull and reach with both hands; crawl, kneel, bend and climb; work outdoors in excessive heat or cold, high humidity or dry atmospheric conditions. + Firefighter/EMT will be exposed to lifting, pulling and numerous strenuous activities that paramedics face during medical response calls. Furthermore, the climate in which strenuous work activities will be required is extremely hot/humid or cold during certain parts of the year/time of day. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Kuwait in support of WEXMAC*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Oversee all food services operations under the general guidance of the DFAC Area Manager. The DFAC Manager will direct all work and be responsible for performance in designated facility (to include subcontractors) to meet the specific performance requirements and standards in the Performance Work Statement (PWS). Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + DFAC Managers are midlevel managers who operate facilities that fluctuate between 500 to 5000 personnel per meal, manage between 40 – 90 personnel and can be used as floaters to cover shifts when managers have days off, vacations, sick or administrative appointments. + DFAC Managers will be responsible for receiving, storing and issuing CLASS I Operational Rations; conducting the 28-day menu and planning with the Government Food Service Advisor; Requisitioning and Acquisition of Subsistence from Prime Vendors and utilizing the System Total Ordering Ration Electronic Receipt system (STORES) and DSCP. + Responsible for storing all subsistence to ensure food items are sanitary and remain fresh before consumed; subsistence is not handled in any manner that exposes the food items to unsanitary conditions or environmental temperature and humidity conditions that could damage or spoil the subsistence; comply with Chapter 13 of FM 10-23-2, Tri-Service Food Code (TB MED 530) and all US Department Health and Human Services Food Code standards, and keep records of all food received and stored as required, verifying proper handling and storage procedures are used. + Manage supervisors and subcontractors with food preparation, food serving, cashier operations, cleanliness of the dining areas, serving lines, kitchens, temperature danger zones, dishwashing area and storage areas IAW with PWS, Work Instructions, Military regulations, pamphlets, guides, Tri-Service Food Code and SOPs. + Maintain all equipment accountability and serviceability; ensure proper cleaning and maintenance is being conducted. + Maintain proper turn-in and ordering of stockage levels of both consumable and non-consumable products. + Ensure that all employees are always in compliance with all established Policies and Regulations. + Direct and ensure that HACCP procedures are followed. + Performs other duties and assignments as required. Qualifications Minimum Qualifications: + + Must have a High School diploma or equivalent, Associate’s Degree preferred. + Must have and maintain a current Serve-Safe certification (Within 3 years). + Must be have a current, valid U. S. Passport and U. S. or Local Driver’s License. + Must be able to read, write, speak and understand English fluently. + Must be able to pass MOD18 employment and deployment qualification requirements that include psychological, medical, dental, drug testing, background checks, etc Experience: + + Must have a minimum of 10 years of large-scale food operation experience with a minimum of 4 years large-scale food operation management, preferably military food service. + Prefer military food service experience in the grade of Sergeant First Class (E-7) or above within the past ten (10) years, four (4) years must have been served as a manager or assistant manager. Skills: + + Should be knowledgeable in AFMIS, STORES, inventory control. HACCP, FM-10-23-2, DA Pam.30-22, AR. 30-22, TB MED 530, AR 40-25, AR 30-21, and U.S Department of Health and Human Services Food Code standards. + Thorough understanding of quality customer food service and preparation of nutritional meals. + Must be able to work under pressure. Service oriented. Material &amp; Equipment Directly Used: + + Desktop computer, scanners, printers, copiers, and other office related equipment. + Microsoft Office Programs ~ Mainly PowerPoint, Excel, and Word Physical Requirements: + + Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. If the use of arm and/or leg controls requires exertion of forces greater than that for sedentary work and the worker sits most of the time, the job is rated for light work. Visual Acuity: + + The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Working Conditions: + + The worker is subject to extreme heat. Temperatures above 100 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity. + The worker is subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. + The worker is subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level. + The worker is subject to atmospheric conditions. One or more of the following conditions that affect the respiratory system of the skin: fumes, odors, dust, mists, gases, or poor ventilation. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Job Title: IT Support</span></p><br> <p><span><span>Classification:</span> Institutional Support</span><br><span><span>Reports To:</span> Technology Support Coordinator</span></p><br> <p><span><span>Location:</span> Saad Al Abdullah, Kuwait</span></p><br> <p><span>About The American International University</span></p><br> <p><span>American International University (AIU) is a private institution in Kuwait, founded in 2019, offering undergraduate programs based on the American model of higher education. AIU provides degrees in Engineering, Architecture and Design, and Business Administration, with English as the language of instruction. The University is committed to fostering intellectual, cultural, and personal growth, preparing graduates for leadership roles in a global society.</span></p><br> <p><span>For more information, visit:&nbsp;www.aiu.edu.kw</span></p><br> <p><span><span>Job Summary</span><br>The IT Support Technician is responsible for providing frontline technical support to faculty, staff, and students at American International University (AIU). This role focuses on day-to-day troubleshooting, deployment, and maintenance of end-user technology, classrooms, laboratories, offices, academic software environments, and event-related IT systems. The position ensures a high level of service availability, responsiveness, and user satisfaction across the campus.</span></p><br> <p><span>Role Impact<br></span>This role directly supports the continuity of academic instruction and administrative operations by ensuring that technology issues are resolved promptly and learning and working environments remain fully functional. The IT Support Technician plays a key role in minimizing downtime, supporting classroom and laboratory readiness, enabling successful university events, and ensuring effective use of institutional technology resources for students, faculty, and staff.</p><br> <p><span><span>Key Responsibilities</span></span></p><br> <p><u>IT Support &amp; Helpdesk Operations</u></p><br> <ul> <li>Provide desktop and end-user support for PCs, laptops, printers, and peripherals across the university.</li> <li>Install, configure, and set up new computer systems, hardware, and standard software images.</li> <li>Diagnose and resolve hardware, operating system, and application issues in a timely and efficient manner.</li> <li>Log, track, and resolve incidents and service requests using the IT Helpdesk Ticketing System (ServiceDesk Plus).</li> <li>Support and train users on key university applications including Microsoft 365, Canvas LMS, and Banner SIS.</li> <li>Assist students, faculty, and staff with login issues, access problems, and basic authentication-related troubleshooting.</li> <li>Conduct IT orientation and onboarding support for new faculty and staff members.</li> <li>Test and validate software updates, patches, and application deployments prior to or following rollout.</li> <li>Printing Student and Staff ID Cards and granting necessary access.</li> <li>Escalate unresolved or complex issues to the Technology Support Coordinator with appropriate documentation.</li> </ul> <p><u>Classroom, Lab &amp; Office Technology Support </u></p><br> <ul> <li>Support daily operations of classrooms, laboratories, meeting rooms, and offices to ensure technology readiness.</li> <li>Assist with setup, testing, and troubleshooting of audio-visual systems, presentation equipment, and hybrid learning tools.</li> <li>Perform pre-session checks to ensure systems are operational for classes, exams, and meetings.</li> </ul> <p><u>Academic Software &amp; Lab Environment Support</u></p><br> <ul> <li>Install, configure, and maintain academic and instructional software within computer laboratories in coordination with Academic Affairs and IT leadership.</li> <li>Provide operational support for academic software platforms used in teaching and learning environments.</li> <li>Assist students and faculty with software access, licensing issues, and application-related troubleshooting during lab sessions.</li> <li>Ensure lab systems are configured consistently and remain compliant with academic and licensing requirements.</li> <li>Support testing and validation of academic software updates prior to semester rollouts.</li> </ul> <p><u>Endpoint Deployment &amp; Asset Support</u></p><br> <ul> <li>Assist with deployment, imaging, configuration, and replacement of Windows 10/11 PCs, laptops, and shared systems.</li> <li>Maintain and update IT asset inventory, including computers, peripherals, and assigned equipment.</li> <li>Support ID card printing management systems and associated hardware as required.</li> </ul> <p><u>User &amp; System Administration</u></p><br> <ul> <li>Assist with domain access, user account creation, and email registration under established procedures.</li> <li>Administer and maintain Active Directory accounts, group memberships, and basic permissions.</li> <li>Support Microsoft 365 user accounts, email configuration, and collaboration tools.</li> <li>Assist with user account setup, password resets, access requests, and basic identity-related troubleshooting.</li> <li>Support faculty, staff, and students in the effective use of Microsoft 365, email, and collaboration tools.</li> </ul> <p><u>Network &amp; Infrastructure Support</u></p><br> <ul> <li>Assist with basic network connectivity troubleshooting and performance-related issues.</li> <li>Support setup and management of laptops, projectors, and presentation equipment for classrooms and meetings.</li> <li>Support System Administrator and Network Engineer with diagnostics and implementation of systems.</li> </ul> <p><u>Event Technology &amp; Technical Support</u></p><br> <ul> <li>Coordinate the setup, configuration, and testing of technical requirements for university events, workshops, forums, and special activities.</li> <li>Provide on-site technical support during events to ensure uninterrupted operation of systems, presentations, and audio-visual equipment.</li> <li>Perform basic analysis of event technical requirements and proactively identify necessary systems, equipment, and configurations based on event type, scale, and venue.</li> <li>Demonstrate initiative in understanding requestor requirements and independently preparing appropriate technical solutions.</li> <li>Coordinate with the Events Department, internal IT teams, and external vendors to deliver reliable event technology support.</li> <li>Assist with setting up and teardown of event-related technology before and after events.</li> </ul> <p><u>Time Attendance System Administration</u></p><br> <ul> <li>Support administration and operational use of the Time Attendance System (COSEC).</li> <li>Generate payroll-related attendance reports and weekly faculty attendance reports as required.</li> <li>Upload and maintain monthly shift schedules within the COSEC system based on approved rosters.</li> <li>Implement approved shift changes and schedule updates requested by the HR Department.</li> <li>Assist with troubleshooting attendance discrepancies and system-related issues in coordination with HR and IT leadership.</li> </ul> <p><u>Documentation, Regulatory Compliance, and Continuous Improvement</u><br></p><br> <ul> <li>Document resolved issues, troubleshooting steps, and common fixes to support knowledge sharing.</li> <li>Follow IT policies, SOPs, security guidelines, and service standards.</li> <li>Identify recurring issues and suggest improvements to processes or configurations.</li> </ul> <p><span>Key Competencies</span></p><br> <ul> <li>Strong troubleshooting and problem-solving skills</li> <li>Practical knowledge of Windows, Mac and Linux operating systems, end-user hardware, and academic lab environments</li> <li>Ability to support students and faculty in high-usage instructional settings</li> <li>Basic understanding of networking, identity systems, and cloud-based productivity platforms</li> <li>Customer-service mindset with clear communication skills</li> <li>Ability to follow procedures, prioritize tasks, and work under supervision</li> <li>Willingness to support extended hours during peak academic periods or events</li> </ul> <p><span><span>Educational Qualifications &amp; Certification</span></span></p><br> <ul> <li><span>Diploma or bachelor’s degree in computer science, Information Technology, or a related field.</span></li> <li><span>Entry-level or relevant IT certifications are an advantage (e.g., Microsoft, CompTIA, or equivalent).</span></li> </ul> <p><span>How to Apply</span></p><br> <p>Interested candidates should visit the Job Opportunities section on our website and submit a resume and cover letter via:&nbsp;https://aiu.edu.kw/careers/jobs</p><br> <p>Applications will be reviewed on a rolling basis until the position is filled.</p><br> <p><span>AIU is an equal opportunity employer committed to academic excellence, professional integrity, and the principled governance of Kuwaiti higher education.</span></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Role and Objectives:&nbsp;Area Manager is responsible to ensure the delivery of exceptional operational and commercial standards throughout stores in their area. Area&nbsp;Manager will assume responsibility for the overall success of the stores by setting targets, supervising store managers and other shop staff and ensuring they are attained. The goal is to ensure our stores will meet and exceed expectations of business development and efficiency.&nbsp;Effective area managers are skilled in managing diverse operations from a distance He / She has a strategic mindset and are excellent leaders. Excellent abilities in financial and operations planning are also essential for the role.&nbsp;Responsibilities (In Order of Priority):&nbsp;Area Management:&nbsp; Works with the management team in contributing to short and long-term organizational planning, including initiatives geared towards operational excellence.&nbsp; Coordinates with Retail and Operations Managers for any sales activities, promotional campaigns/awareness programs&nbsp; Coordinates in communication of information/updates between Head&nbsp;Office and Store Management Teams.&nbsp; Direct the opening of new stores by ensuring the availability of needed resources (staff, Merchandise, logistics and others) and manage the closing of existing ones.  Manage and drive the performance of brands and areas.  Provide support to team in related area for training on specific brand information (Product Knowledge) and roll out of new collections across stores in accordance with Visual merchandising and Product management teams  Visit shops across different locations for Brand Performance Evaluation and Team Support.  Participate in development of the seasonal projection report and monitor competitors' new openings and street locations opportunities (when applicable) and inform the hierarchy accordingly.  Full aware of the procedures of Opening, Daily customer round &amp; Closing Stores  Follow up for any maintenance issues in the stores. Financial Controls and Profitability Management:&nbsp; Oversee the sale performance by comparing the actual sales versus the weekly targets and compare it with the previous years.&nbsp; Communicate and measure the sales target and objectives for shops (daily, weekly and monthly) with shops managers and seek maximize shops sales.&nbsp; Keep up to date for yearly calendar in coordination with Product management Team and direct the coordination of sales promotion activities and pricing of merchandising.&nbsp; Review KPI's (Daily, weekly, quarterly and yearly Sales vs budgets, Stock Reports etc.) daily and communicate to Shop Managers as necessary.&nbsp; Maximize the Sales per square meter for each store by monitoring the stores performance report and take the needed actions.  Monitor the sales performance of stores with shops managers and operations manager daily, monthly quarterly and yearly.  Benchmark shops against each other, set/reset/clarify objectives and identify Best Practices monthly to achieve the sales target.&nbsp; Conduct competitors' survey and share with division head.&nbsp;Stock Management:&nbsp; Achieve the stock control targets in line with the company guidelines to prevent financial loss.  Review and monitor inventory level reports and coordinate with product management team to take the appropriate action in a timely manner.&nbsp; Provide feedback about customer feedback related to brand and stocks to brand managers and operations manager.&nbsp; Ensure best seller stock availability and display in focal point.&nbsp;Customer Service Management:  Conduct customer surveys and get feedback from customers about quality of services&nbsp; Review customer complaints and provide support appropriately in addition to communicate as necessary to operations manager.  Ensure exceptional customer service is provided at all times.&nbsp; Database management.&nbsp;People Management&nbsp; Maintain and enhance the skills of the shops managers at managing individuals and their teams and getting the best out of them.&nbsp; Ensure shops teams are trained and coached on selling skills, merchandising &amp; exceptional Customer Service&nbsp; Monitor the scheduling of all types of leaves for store management staff, in terms of weekly schedule and rotation.  Assist in shops recruitment and inductions for new joiners.  Assess shops managers' performance and identify their training, coaching setting career plan needed and identify potential employees.&nbsp; Plan and execute Best Practice with shops managers.&nbsp;Store's Administration:&nbsp; Ensure marketing plans are implemented and followed up in stores.  Ensure all policies and procedures and other legal requirements needed are followed properly  Audit the stores and their premises are maintained to company standards/franchise standards, policies and procedures  Monitor Adherence safety, security and cleanliness of store in accordance with shops managers  Ensure maintenance of store for all aspects Store's Image:&nbsp; Collate and provide constructive feedback on VM Standards to the business.  Ensure the visual presentation of all stores presents the brand image  Ensure standards and guidelines of visual merchandising are followed and recommend brands positioning and image.&nbsp;Store's Visit:&nbsp; Periodically store visit with checking the store manager check list, make sure employees are following company standards and make randomly audit for cash and sending/receiving stocks.&nbsp; Quarterly visit the store for OVR (Operations Visit Review) List.&nbsp;Any other task within the business' need.&nbsp;Accountabilities (KPIs):  Sales and ATV &amp; UPT Target Achievement  Team Management &amp; Development&nbsp; Store Operational Processes&nbsp;&nbsp; Financial &amp; Profit&nbsp;&nbsp;&nbsp;Relation Ship Span Internal Relation Ship&nbsp;40% 30% 20% 10% Product management Department External Relation Ship&nbsp;Marketing Department HR Department Customers Logistics Department Training Department&nbsp;Mall Management IT Department Suppliers Project Department&nbsp;VM Department Reports Required:  Business Reviews  People Development  Commercial Feedback  Presentations  Key Items&nbsp;Will be provided as per the business' need.&nbsp;</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Qualifications and Requirements:&nbsp; Dynamic &amp; Result Oriented Personality  Strong Leader Ship Skills  The ability to work calmly under pressure  Initiative and enthusiasm.  The ability to motivate and lead a team.  Excellent communication and 'people skills'  Excellent planning and organizational skills.&nbsp; Time Management &amp; Flexible in working times.  Reading reports and analysis skills  Bachelor Degree in Management, Marketing, Fashion or any relevant qualification.  5 years of experience in fashion retail industry.  Computer Literacy (MS Office).  Excellent Command in Arabic &amp; English Languages.&nbsp;</p></div>

Department: Controllership Location: Kuwait<br><br>Description<br><br>Tabby is the GCC's leading shopping and payments platform, giving millions of people across Saudi Arabia and the UAE more control in the way they spend, save and earn. Headquartered in Riyadh, we've grown into one of the largest fintech companies to come out of the Arab world, working with +65,000 sellers, from global names like Apple, IKEA, Adidas and Shein to the region's leading retail groups.<br><br>We're now building a local team on the ground in Kuwait, with a renewed presence in the market coming soon. This is a rare chance to join us at the start of a local launch, shaping how we show up for Kuwaiti shoppers and sellers from day one, backed by the scale, technology and track record we've built across the region.<br><br>If you want to help us build something significant in Kuwait, backed by proven regional success, we want to hear from you.<br><br>ROLE PURPOSE<br><br>The Head of Finance, Kuwait is the senior finance leader in country and the accountable owner of the Kuwait entity’s<br>books, records, statutory reporting and financial control environment. The mandate is deliberately weighted towards<br>controllership and financial reporting: designing the close, the chart of accounts, the reporting pack and the control<br>framework correctly the first time, so that Kuwait scales without accumulating reporting debt.<br><br>Key Responsibilities<br><br>1. Financial reporting and controllership (primary focus)<br><br>Own the Kuwait books: Full accountability for the general ledger, chart of accounts, accounting manual and month-end close for the Kuwait entity, aligned to Group policy and the group accounting platform.<br>Deliver the monthly close: Run a disciplined close calendar with defined cut-offs, task ownership and dependencies; deliver the Kuwait reporting pack to Group Finance on the group timetable, complete with variance commentary and balance sheet substantiation.<br>Statutory financial statements: Prepare the Kuwait statutory financial statements and notes to a publication standard, including Arabic-language reconciliation where required, statutory reserve transfers under the Kuwait Companies Law, and full cross-reference, casting and footing checks before issue.<br>Group consolidation: Ensure Kuwait reports cleanly into the group consolidation — intercompany reconciliation and settlement, transfer pricing support, related-party disclosure, and consistent application of group accounting policies.<br>Reconciliations and substantiation: Own a complete reconciliation framework: bank and payment-service provider settlement, receivables subledger to GL, merchant payables, collections and recoveries, and suspense clearing with ageing and escalation of unresolved items.<br><br>2. Regulatory, tax and statutory compliance<br>Central Bank of Kuwait reporting: Own the preparation, review and timely submission of all CBK regulatory returns and prudential reporting applicable to the licensed entity, and act as the finance counterpart on regulatory queries, inspections and information requests.<br>Licensing and capital: Support the licensing and authorisation process with financial projections, capital adequacy analysis and regulatory capital monitoring, and maintain compliance with minimum capital and any prudential ratios imposed on the entity. (Note: appointment to senior positions in CBK-supervised entities is subject to regulatory fit-and-proper assessment and non-objection.)<br>Tax: Manage all Kuwait tax obligations and filings, including corporate income tax where applicable based on the entity’s ownership structure, Zakat and KFAS contributions for Kuwaiti shareholding companies, withholding and retention requirements on payments to contractors and suppliers, and any applicable domestic minimum top-up tax assessment for the group. Coordinate with Group Tax and external advisers.<br>Statutory and corporate filings: Maintain good standing across all statutory filings and renewals — Ministry of Commerce and Industry, commercial registration, social insurance, labour and any sector-specific obligations.<br><br>3. Controls, audit and risk<br><br>Control environment: Design and operate the Kuwait financial control framework — delegation of authority, segregation of duties, payment and journal approval workflows, and access controls in the accounting and payment systems.<br>External audit: Own the annual audit end to end: audit planning, PBC schedules, technical positions and memoranda, resolution of findings, and timely signed accounts.<br>Documentation: Maintain written accounting policies, process narratives and technical position papers so that judgements are auditable and survive personnel change.<br><br>4. Market entry, build-out and leadership<br>Build the team: Recruit, develop and lead a small high-calibre finance team as the market scales, and build local bench strength rather than dependency on a single individual.<br>Stakeholder management: Act as the trusted finance voice in the Kuwait leadership team and a reliable, low-surprise partner to Group Finance, Legal, Compliance, Risk and Treasury.<br><br><br>Skills, Knowledge and Expertise<br><br>Professional accounting qualification — ACA, ACCA, CPA, CA or equivalent.8–12+ years of progressive finance experience, including a period in an audit or advisory practice (Big Four) and demonstrable ownership of a controllership function. Deep, practical IFRS expertise with a track record of preparing IFRS financial statements and technical position papers that have withstood audit scrutiny. Hands-on IFRS 9 expected credit loss experience in a lending, consumer finance, BNPL, banking or receivables-intensive business Experience of a regulated financial-services environment, including regulatory reporting to a central bank or comparable supervisor. Working knowledge of the Kuwait regulatory, tax and statutory landscape, or clearly transferable GCC experience with the ability to get current quickly. Proven month-end close ownership with a strong reconciliation and control discipline, and evidence of having built or materially improved a close process. Comfort operating with limited infrastructure — a builder who is equally willing to design the policy and clear thereconciliation. Fluent English; professional Arabic (essential for statutory, regulatory and audit interaction in Kuwait). Based in Kuwait<br><br>Preferred Prior experience launching a new legal entity, licence or market — including entity incorporation, systems set-up and first audit. Fintech, payments or high-growth technology experience, with an appreciation of scale, automation and data quality. Experience within a multi-entity group reporting into a central group finance function and consolidation. Exposure to receivables financing, securitisation or debt facility reporting and covenant compliance. Strong systems capability — ERP implementation, reporting automation, and comfort working directly with large datasets.

Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.<br><br>Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance.<br><br>Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements.<br><br>USAF equivalent position is Munitions/Weapons Technician Apprentice.<br><br>Essential Responsibilities: <br><br> Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components. Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction. Assist in management of all inspection, maintenance, and storage of munitions and support equipment. Support quality assurance, compliance, continuity, and standardization of munitions programs. Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems. Maintain weapons certification and currency. Assist with availability and serviceability of munitions to support and meet customer requirements. Perform all other duties as assigned or requested. <br><br>Minimum Requirements:<br><br> Must have High School diploma or have completed relevant military and/or vocational technical school curriculum. Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required. Completed USAF Munitions/Weapons Tech School or DoD equivalent. Must possess basic knowledge of technical publications related to aircraft maintenance. Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo Must be able to inspect and operate ground support and auxiliary equipment. Must achieve a passing grade in all required courses/certifications for continued employment, as needed. Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment. Must be able to Deploy to Forward Locations (other countries) as Directed by the Government. Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods. Must be able to speak, read, write, and understand English. Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance. Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment. Must submit updated SF-86 within 30 days of hire start date. Must have current/active State Issued Driver’s License. Must be able to acquire and maintain a valid flight-line Government Driver’s License. Must have valid U. S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages. Must be fully COVID-19 vaccinated with booster.  Accommodations may be available under limited circumstances. <br><br> Preferred Qualifications:<br><br> Associate degree in a relevant career field. RPA Deployment Experience. Prior Experience as a Defense Contractor. Munitions/Weapons experience within the last 10 years.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span>Manager – Student Well Being</span></p><br> <p><span><span>Classification:</span>Enrollment &amp; Student Affairs</span></p><br> <p><span><span>Reports To:</span>Director – Student Affairs</span></p><br> <p><span><span>Location:</span>Jahra, Kuwait</span></p><br> <p><span><span>About The American International University</span></span></p><br> <p><span>American International University (AIU) is a private institution in Kuwait, founded in 2019, offering undergraduate programs based on the American model of higher education. AIU provides degrees in Engineering, Architecture and Design, and Business Administration, with English as the language of instruction. The University is committed to fostering intellectual, cultural, and personal growth, preparing graduates for leadership roles in a global society.</span></p><br> <p><span>For more information, visit:www.aiu.edu.kw</span></p><br> <p><span>Job Purpose</span></p><br> <p><span>The Manager – Student Well Being is responsible for leading the University's student wellbeing services by developing, implementing, and overseeing programs that promote students' mental health, emotional wellbeing, resilience, and overall wellness. The role provides leadership for student wellbeing initiatives, counselling services, crisis intervention, and preventative education programs while fostering a supportive, inclusive, and healthy campus environment that contributes to student success and retention.</span></p><br> <p><span>Key Responsibilities</span></p><br> <ul> <li><span>Lead and oversee the University's Student Wellbeing Office and related wellbeing initiatives.</span></li> <li><span>Supervise the Mental Health Counsellor and provide leadership, guidance, coaching, and professional support.</span></li> <li><span>Develop and implement comprehensive student wellbeing strategies, programs, and services that promote mental health, emotional wellbeing, resilience, and healthy lifestyles.</span></li> <li><span>Establish policies, procedures, and operational standards for student wellbeing and counselling services in accordance with University policies and professional best practices.</span></li> <li><span>Coordinate student wellbeing awareness campaigns, workshops, seminars, wellness events, and preventative education initiatives.</span></li> <li><span>Oversee the provision of counselling and referral services for students experiencing personal, emotional, psychological, or academic challenges.</span></li> <li><span>Coordinate crisis intervention, risk assessment, and student support responses in collaboration with Student Affairs, Academic Affairs, Campus Security, and external healthcare providers when required.</span></li> <li><span>Develop partnerships with healthcare providers, community organizations, and external specialists to strengthen student support services.</span></li> <li><span>Collaborate with Student Affairs staff, faculty members, and other University departments to identify and support students requiring wellbeing interventions.</span></li> <li><span>Monitor student wellbeing trends, service utilization, program effectiveness, and key performance indicators, preparing reports and recommendations for continuous improvement.</span></li> <li><span>Ensure compliance with professional ethical standards, confidentiality requirements, University policies, and applicable laws governing student wellbeing services.</span></li> <li><span>Manage departmental resources, budgets, and operational planning to ensure effective service delivery.</span></li> <li><span>Support institutional initiatives that promote student engagement, retention, and overall student success.</span></li> <li><span>Perform other duties as assigned.</span><br></li> </ul> <p><span>Required Skills and Qualifications</span></p><br> <ul> <li><span>Strong knowledge of student wellbeing, mental health services, counselling program administration, and higher education student support.</span></li> <li><span>Demonstrated experience managing wellbeing, counselling, or student support programs.</span></li> <li><span>Strong understanding of crisis intervention, student development, and mental health promotion.</span></li> <li><span>Excellent leadership, organizational, and project management skills.</span></li> <li><span>Strong interpersonal, communication, and relationship-building abilities.</span></li> <li><span>Ability to work collaboratively with academic and administrative departments, healthcare professionals, and external stakeholders.</span></li> <li><span>High level of professionalism, integrity, discretion, and ability to manage highly confidential information.</span></li> <li><span>Strong analytical, problem-solving, and decision-making skills.</span></li> <li><span>Proficiency in Microsoft Office and student services or case management systems.</span></li> </ul> <p><span>Education and Experience</span></p><br> <ul> <li><span>Master's degree in Psychology, Counselling, Social Work, Mental Health, Higher Education Administration, Student Affairs, or a related field from a reputable university.</span></li> <li><span>Minimum of<span>5–10 years</span>of progressively responsible experience in student wellbeing, counselling services, mental health, student affairs, or higher education administration.</span></li> <li><span>Minimum of<span>3–5 years</span>of leadership or supervisory experience.</span></li> <li><span>Experience managing student wellbeing programs, counselling services, crisis intervention, and wellness initiatives within a higher education institution is highly desirable.</span></li> <li><span>Professional licensure or certification in counselling, psychology, or a related discipline is considered an advantage.</span></li> </ul> <p><span>How to Apply</span></p><br> <p><span>Interested candidates should visit the Job Opportunities section on our website and submit a resume and cover letter via:&nbsp;https://aiu.edu.kw/careers/jobs</span></p><br> <p><span>Applications will be reviewed on a rolling basis until the position is filled. The successful candidate is expected to commence employment immediately.</span></p><br> <p><span>AIU is an equal opportunity employer committed to academic excellence, professional integrity, and the principled governance of Kuwaiti higher education.</span></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Project Engineer I - Buildings Projects<br><br><br><br><br><p><b>Job Title </b></p><br><br><br><p><b><i>Project Engineer I- Buildings Projects</i></b></p><br><br><br><p><b>Division /Project </b></p><br><br><br><p>KBR's Sustainable Technology Solutions (STS) group is seeking a <b>Project Engineer I – Building &amp; Office Tower Projects</b> to support the planning, design, procurement, construction, and commissioning of office towers, administration buildings, control centers, and associated facility infrastructure under PMC contracts.</p><br><br><br><p><b>Primary Objectives</b></p><br><br><ul><li>Management of support services for supervising and directing engineering, procurement and management of construction contractors appointed by the Client.</li><li>Ensure the successful delivery of projects through all phases, including concept design, FEED, detailed engineering, tendering, construction, commissioning, and handover.</li><li>Act as primary technical coordination interface with client to ensure that the client’s expectations are satisfied.</li></ul><ul><li>Ensure the project conforms to the client’s approved Basis of Design and local authority requirements, building regulations, sustainability objectives, and applicable international codes and standards.</li></ul><ul><li>Coordinate architectural, structural, MEP, fire protection, security, ICT, vertical transportation, and interior fit-out disciplines to achieve an integrated design solution</li></ul><br><p><b>Responsibilities</b></p><br><br><ul><li>Support project mobilization, setup, takeover, and handover activities</li><li>Set-up, take over / hand over of projects</li><li>Establish clear objectives and deliverables for design consultants and engineering teams</li><li>Management of PMC’s engineering teams during FEED, Prepare and review scopes of work, technical specifications, employer requirements, and tender documentation</li><li>Compilation of the of scope of work documents, technical part of Invitation to Bid documents and the documentation of Project Milestone Reviews</li><li>Coordination of reviews and comments on engineering and other technical deliverables of 3rd party companies like P&amp;IDs, line lists, equipment datasheets, instrumentation index, cable routing, etc. within the agreed review time.</li><li>Ensures compliance with all applicable project standards and specifications</li><li>Ensures proper compilation and updating of as-built documents, redlines, MTOs, loop folders and commissioning binders and handover documentation.</li><li>Ensures the delivery of the as built (End of Job) documentation to the client in time and good quality</li><li>Contribution to the development of overall project schedule.</li><li>Ensures work progress as per approved schedule in close cooperation with Project Controls Team</li><li>Set up and regularly maintaining a project dashboard in close cooperation with Project Controls Team</li><li>Monitors with support of the Project Controls Team cost aspects of the project within direct control to forecast final costs, trends and takes action to avoid cost overruns.</li><li>Evaluation of Earned Value / value of work for project completion with support of the Project Controls Team</li><li>Builds and maintains a healthy relationship with clients and acts as project focal point for the client</li><li>Proactively resolves scope and schedule issues with the 3rd party contractor as they arise.</li><li>Knows the contract between the FEED- or EPC-Contractor and between the Client and 3rd party contracts.</li><li>Knowing the PMC Contract between KBR and the Client</li><li>Ensures Change Order recording and participation from project team in technical parts of change order assessment</li><li>Regularly provides input to project reports to internal Project Management and the Clients</li><li>Assessment and feedback of third-party contractor’s project reports</li><li>Defines and communicates team’s priorities such as achievement of milestones and other key project objectives.</li><li>Listens to the team, discusses the issues, resolves problems and directs activities to remove roadblocks and achieve objectives.</li><li>Effective communication with the design and engineering teams (inside PMC and third parties) and other project stakeholders like operations, maintenance etc.</li><li>Regularly chairs and records project team meetings within the PMC organisation and with the client and with the 3rd party contractors or consultants.</li><li>Responsibility for preparation and status tracking of all projects related correspondence and transmittals / project documents.</li><li>Perform together with relevant discipline engineers technical bid evaluations (TBE) and award recommendations</li><li>Participates or delegates participation of discipline engineers in Factory and Site Acceptance Tests</li></ul><br><p><b>Qualifications including Required Education, Experience, &amp; Skills</b></p><br><br><ul><li><span>B. Sc. Eng from an accredited college or university.</span></li></ul><br><ul><li><span>Minimum 15 years post-graduation total experience</span></li></ul><br><ul><li><span>10 years minimum experience post qualification in infrastructure, buildings projects</span></li></ul><br><ul><li><span>5 years of minimum experience in a Senior Project Engineer/Project Manager role</span></li></ul><br><ul><li><span>Must have demonstrated ability of effective functioning in a multi-cultural environment, preferably in the Middle East.</span></li></ul><br><b>Essential skills/experience</b><ul><li>Project planning and execution.</li><li>Multidisciplinary design coordination.</li><li>Commercial and contract awareness.</li><li>Construction and commissioning management.</li><li>Stakeholder engagement and client management.</li><li>Problem-solving and decision-making.</li><li>Strong written and verbal communication skills.</li><li>Presentation and reporting skills.</li><li>Leadership and team coordination.</li><li>Risk management and change control.</li><li>Proficiency with project management and BIM platforms.</li><li>Analysis and problems solving</li><li>Creativity/innovation</li><li>Communications, written and oral.</li><li>Ability to influence and persuade.</li></ul><br><p><b>Decarbonization – Energy Transition – Sustainability </b></p><br><br><p><b>Belong. Connect. Grow. with KBR! </b></p><br><br><br><br><br> </div>

<p><h4>Job summary</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance.</p> <p>Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements.</p> <p>USAF equivalent position is Munitions/Weapons Technician Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li> <li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li> <li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li> <li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li> <li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li> <li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li> <li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li> <li>Maintain weapons certification and currency.</li> <li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li> <li>Perform all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft munitions/weapons maintenance experience required.</li> <li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li> <li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Munitions/weapons experience within the last 10 years.</li> </ul></p><p></p>

<p><h4>Job summary</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance.</p> <p>Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements.</p> <p>USAF equivalent position is Munitions/Weapons Technician Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li> <li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li> <li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li> <li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li> <li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li> <li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li> <li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li> <li>Maintain weapons certification and currency.</li> <li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li> <li>Perform all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft munitions/weapons maintenance experience required.</li> <li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li> <li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Munitions/weapons experience within the last 10 years.</li> </ul></p><p></p>

<p><h4>Principal accountabilities</h4> <p>Inspects and approves completed maintenance actions, solves repair problems by studying drawings, wiring diagrams and schematics, and technical publications.<br> Inspects, instructs, services and certifies individual and crew equipment.<br> Order, receive and inventory kits and components.<br> Resolve shipping discrepancies.<br> Ensure proper fit of crew member clothing.<br> Maintain ALSE and NVD for DoS and DI personnel.<br> Maintain computerized inventories and records to ensure timely and accurate compliance with inspection intervals.<br> Provides instruction to contractor and host nation personnel regarding the proper use and care of equipment.<br> Perform other duties as assigned.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent is required.<br> One (1) year verifiable experience as an ALSE technician.<br> Must possess a certificate of training as a school trained ALSE technician.<br> Valid US passport (minimum 2.5 years validity) required for deployment to Germany.<br> Ability to obtain and maintain a US government security clearance, NAC-I T1 public trust. US citizenship is required to obtain a T1/CAC NACI clearance.<br> Must meet and be able to pass CENTCOM medical requirements prior to deployment.<br> Ability to obtain a favorable background check for Kuwait PCC and obtain a Kuwait visa.</p> <h4>Knowledge & skills</h4> <ul> <li>CMF 92 supply & services MOS series or other military/commercial equivalent (92R MOS preferred).</li> <li>Must have working knowledge of aircrew and aircraft LSE requirements for extreme environmental and high risk areas of operation.</li> <li>Must be able to ascertain LSE requirements for a multi-type aircraft environment.</li> <li>Must have knowledge of basic theory of flight and aircraft systems nomenclatures.</li> <li>Must have knowledge of flight line/ramp safety procedures and aircraft fire-fighting procedures.</li> <li>Must have knowledge of aviation maintenance data systems and associated documentation/forms.</li> <li>Must have knowledge of life support equipment maintenance tools and tool control procedures.</li> <li>Must be knowledgeable of principles of instruction.</li> <li>Must have knowledge of seat kit survival components.</li> <li>Must have knowledge of aircrew life raft and life preserver inspections/maintenance.</li> <li>The ability to obtain and maintain a moderate risk public trust (MRPT) through Department of State background investigation is a condition of continued employment.</li> <li>Must possess or have the ability to obtain a U.S. passport before assignment, including renewal and additional pages if applicable.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for up to six hours per day and sit for up to two hours per day.</li> <li>Must be able to climb stairs, ramps, ladders and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to carry, push or pull up to 50 pounds.</li> <li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of seven feet.</li> <li>Must be able to communicate by voice and detect sounds.</li> <li>Must be able to distinguish color and judge three dimensional depths.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must have minimum 20/100 near and far vision, correctable to 20/20. Also must be able to focus night vision devices (NVD) at a distance of at least 20 feet.</li> <li>Be able to travel to and between remote location(s).</li> <li>Travel to austere or inhospitable high stress environments may be required.</li> <li>Ability to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure may be required.</li> <li>May be exposed to extreme noise from turbine and jet engine aircraft.</li> <li>May be exposed to fumes or airborne particles.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, and aircraft.</li> <li>Will be exposed to surface obstructions (ladders, stairs, etc.).</li> <li>May be exposed to chemical, mist, gas, vapors, ultra-violet and infra-red radiation.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Prepare special meals or substitute items. Regulate temperature of ovens, broilers, grills, and roasters. Pull food from freezer storage to thaw in the refrigerator. Ensure proper portion, arrangement, and food garnish. Maintain food logs. Monitor the quality and quantity of food that is prepared. Communicate assistance needed during busy periods. Inform Chef of excess food items for use in daily specials. Inform Food &amp; Beverage service staff of menu specials and out of stock menu items. Ensure the quality of the food items. Prepare and cook food according to recipes, quality standards, presentation standards, and food preparation checklist. Prepare cold foods.<br>Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees; serve as a role model. Follow all company and safety and security policies and procedures; report maintenance needs, accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Anticipate and address guests’ service needs. Speak with others using clear and professional language. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards. Stand, sit, or walk for an extended period of time. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.<br>PREFERRED QUALIFICATION<br>Education: Technical, Trade, or Vocational School Degree.<br>Related Work Experience: At least 3 years of related work experience.<br>Supervisory Experience: No supervisory experience.<br>License or Certification: None<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>Marriott Hotels strive to elevate the art of hospitality, innovating at every opportunity while keeping the comfort of the oh-so-familiar all around the globe. As a host with Marriott Hotels, you will help keep the promise of “Wonderful Hospitality. Always.” by delivering thoughtful, heartfelt, forward-thinking service that upholds and builds upon this living legacy. With the name that’s synonymous with hospitality the world over, we are proud to welcome you to explore a career with Marriott Hotels. In joining Marriott Hotels, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you. <br>JW Marriott&nbsp;is part of Marriott International's luxury portfolio and consists of more than 100 beautiful properties in gateway cities and distinctive resort locations around the world. JW believes our associates come first. Because if you’re happy, our guests will be happy. JW Marriott associates are confident, innovative, genuine, intuitive, and carry on the legacy of the brand’s namesake and company founder, J.Willard Marriott. Our hotels offer a work experience unlike any other, where you’ll be part of a community and enjoy true camaraderie with a diverse group of co-workers. JW creates opportunities for training, development, recognition and most importantly, a place where you can pursue your passions in a luxury environment with a focus on holistic well-being. Treating guests exceptionally starts with the way we take care of our associates. That’s The JW Treatment™. In joining JW Marriott, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Aviation Life Support Equipment (ALSE) Technician serves as focal point for all logistics and repair functions for all supplied ALSE, first aid kits and Night Vision Devices. Principal Accountabilities Inspects and approves completed maintenance actions, solves repair problems by studying drawings, wiring diagrams and schematics, and technical publications. Inspects, instructs, services and certifies individual and crew equipment Order, receive and inventory kits and components Resolve shipping discrepancies Ensure proper fit of crew member clothing Maintain ALSE and NVD for DoS and DI personnel Maintain computerized inventories and records to ensure timely and accurate compliance with inspection intervals Provides instruction to contractor and host nation personnel regarding the proper use and care of equipment Perform other duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High School diploma or equivalent is required.</li><li>One (1) year verifiable experience as an ALSE technician.</li><li>Must possess a certificate of training as a school trained ALSE Technician.</li><li>Valid US Passport (minimum 2.5 years validity) Required for deployment to Germany.</li><li>Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust.</li><li>** US Citizenship is required to obtain a T1/CAC NACI Clearance.</li><li>Must meet and be able to pass CENTCOM Medical requirements, prior to deployment.</li><li>Ability to obtain a favorable background check for Kuwait PCC and obtain a Kuwait Visa.</li></ul><p>Knowledge &amp; Skills</p><ul><li>CMF 92 Supply &amp; Services MOS series or other military/commercial equivalent (92R MOS preferred)</li><li>Must have working knowledge of aircrew and aircraft LSE requirements for extreme environmental and high risk areas of operation</li><li>Must be able to ascertain LSE requirements for a multi-type aircraft environment</li><li>Must have knowledge of basic theory of flight and aircraft systems nomenclatures</li><li>Must have knowledge of flight line/ramp safety procedures and aircraft fire-fighting procedures</li><li>Must have knowledge of aviation maintenance data systems and associated documentation/forms</li><li>Must have knowledge of life support equipment maintenance tools and tool control procedures</li><li>Must knowledgeable of principles of instruction</li><li>Must have knowledge of seat kit survival components</li><li>Must have knowledge of aircrew life raft and life preserver inspections/maintenance</li><li>The ability to obtain and maintain a Moderate Risk Public Trust (MRPT) through Department of State Background Investigation is a condition of continued employment</li><li>Must possess or have the ability to obtain a U.S. Passport before assignment, this includes renewal and additional pages if applicable.</li></ul><p>Physical Requirements/Working Environment</p><ul><li>Must be able to walk and stand on level and/or inclined surfaces for up to six hours per day and sit for up to two hours per day</li><li>Must be able to climb stairs, ramps, and ladders and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to carry, push or pull up to 50 pounds</li><li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet</li><li>Must be able to communicate by voice and detect sounds</li><li>Must be able to distinguish color and judge three dimensional depths</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc</li><li>Must have minimum 20/100 near and far vision, correctable to 20/20. Also must be able to focus night vision devices (NVD) at a distance of at least 20 feet</li><li>Be able to travel to and between remote location(s)</li><li>Travel to austere or inhospitable high stress environments may be required</li><li>Ability to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure may be required</li><li>May be exposed to extreme noise from turbine and jet engine aircraft</li><li>May be exposed to fumes or airborne particles</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, and aircraft</li><li>Will be exposed to surface obstructions (ladders, stairs, etc)</li><li>May be exposed to chemical, mist, gas, vapors, ultra-violet and infra-red radiation.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.<br>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.<br>PREFERRED QUALIFICATIONS&nbsp;<br>Education: High school diploma or G.E.D equivalent.<br>Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting.<br>Experience in hotel engineering or maintenance a plus.<br>Supervisory Experience: No supervisory experience.&nbsp;<br>REQUIRED QUALIFICATIONS<br>License or Certification: Driver’s License<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>At Courtyard, we’re passionate about better serving the needs of travelers everywhere. It’s what inspired us to create the first hotel designed specifically for business travelers, and it’s why the Courtyard experience today empowers our guests, no matter the purpose of their trip. We’re looking for achievers who are passionate about providing a guest experience that goes above and beyond, enjoy being part of a small yet ambitious team, and love learning how to always improve – all while having fun. <br>In joining Courtyard, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> <b>Job Summary</b> </p> <p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. </p> <p> </p> <p>Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance. </p> <p> </p> <p>Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements. </p> <p> </p> <p>USAF equivalent position is Munitions/Weapons Technician Apprentice.<b> </b> </p> <p> </p> <p> <b>Essential Responsibilities: </b> </p> <p> </p> <p> Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. </p> <p> Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components. </p> <p> Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures. </p> <p> Inspect bomb release systems and missile launchers to determine need for repair or destruction. </p> <p> Assist in management of all inspection, maintenance, and storage of munitions and support equipment. </p> <p> Support quality assurance, compliance, continuity, and standardization of munitions programs. </p> <p> Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems. </p> <p> Maintain weapons certification and currency. </p> <p> Assist with availability and serviceability of munitions to support and meet customer requirements. </p> <p> Perform all other duties as assigned or requested.</p> <p> </p> <p> <b>Minimum Requirements:</b> </p> <p> </p> <p> Must have High School diploma or have completed relevant military and/or vocational technical school curriculum. </p> <p> Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required. </p> <p> Completed USAF Munitions/Weapons Tech School or DoD equivalent. </p> <p> Must possess basic knowledge of technical publications related to aircraft maintenance. </p> <ul> <li>Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo</li> </ul> <p> Must be able to inspect and operate ground support and auxiliary equipment. </p> <p> Must achieve a passing grade in all required courses/certifications for continued employment, as needed. </p> <p> Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment. </p> <ul> <li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li> </ul> <p> Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods. </p> <p> Must be able to speak, read, write, and understand English. </p> <p> Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance. </p> <p> Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</p> <p> Must submit updated SF-86 within 30 days of hire start date. </p> <p> Must have current/active State Issued Driver s License. </p> <p> Must be able to acquire and maintain a valid flight-line Government Driver s License. </p> <p> Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages. </p> <p> Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</p> <p> </p> <p> <b> Preferred Qualifications:</b> </p> <p> <b> </b> </p> <p> Associate degree in a relevant career field. </p> <p> RPA Deployment Experience. </p> <p> Prior Experience as a Defense Contractor. </p> <p> Munitions/Weapons experience within the last 10 years<b>. </b> </p> <p> </p></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Kuwait in support of WEXMAC*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Under the supervision of the Public Works Director, responsible for facilities engineering, maintenance, operations, and application of quality management programs within Public Works Operations and Maintenance (O&amp;M) activities. Works on solutions exercising independent judgment in developing methods, techniques and evaluation criteria for obtaining results for total program in concert with and at the direction of the Public Works Director. Administrator of the Public Works O&amp;M program(s), having full authority and responsibility for ensuring performance objectives and standards are met. The Facilities Operations &amp; Maintenance Manager (O&amp;M) or designated alternate shall be readily available on-site during regular working hours (the designated alternate manager shall be assigned by the Public Works Director from one of the Public Works Departments). Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Responsible for all operations aspects of implementing the contract including cost management, schedule management, data management, and other related operations and maintenance activities. + Ensures that the Public Works Organization properly receives, responds to, executes, and concludes all trouble calls, facility modification requests, and any other requests for special work, including identifying the work being requested, defining the scope of the work, making any necessary repairs, and/or identifying and receiving any required approvals to such work. + Ensures all Public Works activities are performed in accordance with all applicable laws, regulations, standards and codes imposed by the U.S. Government and all applicable agreements with the government of host nation. + Communicates professionally, both orally and in writing, with the Client, Task Order Manager, Deputy Task Order Manager, Sr. Director and subordinates, as needed, to relay information. This includes, but is not limited to, reports to the Client, subcontractors, staff meetings, performance appraisals, job requirements, + Infrastructure metrics, projects, Quality Standard Procedures, and safety practices. + Responsible for managing and leading lower level managers and employees performing facilities operations and maintenance related activities. + Develops and executes integrated corporate and departmental policies and procedures and provides input on departmental business and technical strategies, objectives and goals. + Acquires resources for activity, provides technical coordination of suppliers and leads process improvements. + Develops and maintains relationships and partnerships with customers, peers, stakeholders, and partners. + Provides oversight and approval of technical approaches, products and processes. + Ensures both prime and subcontractors abide by program, contractual, and industrial standards/best practices, where required, which meet the requirements of the contract. + Determines need and provides training for personnel to implement and complete projects as directed by the Public Works Director. + Participates in various program meeting/reviews and participates in formal briefings to both Customers and corporate management personnel. + Generates various reports/deliverables including monthly program status reports to the appropriate management personnel as required by the Public Works Director. + Develops and supports achievement of performance metrics for Public Works Activities. Reviews programs with subordinates to ensure a high degree of achievement + Performs Job Duties as assigned. Qualifications + Education/Experience Requirements: + Bachelor of Science (BS) degree in engineering or related technical field/discipline required. + Facility Management Professional or Project Management Professional desirable + Ability to obtain host nation driver license. + Must be CAC eligible and/or ability to obtain a CAC. + Experience: + 7 years of experience in facility engineering, Operations, and Maintenance of facility assets and utility infrastructure comparable to/being offered under this contract. + Experience in military environment preferred. + Skills + Must know or capable to gain an understanding of the operations and administration associated with the mission of the Public Works Directorate. + Knowledge of business and management principles involved in strategic planning, resource allocation, leadership technique, production methods, and coordination of people and resources. + Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction. + Knowledgeable of how to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. + Requires a collaborative work style, fostering cooperation and teamwork. + Must exercise discretion and good sound judgment. + Must have high level of proficiency in the use of MS Office and/or other related applications. + The Facilities Operations &amp; Maintenance Manager must have strong capabilities in team building and personnel development. + Knowledge of customers (e.g. Department of Defense, United States Army Corps of Engineers and/or Department of State), as appropriate to the specific contract, is required. + Working Conditions: + Subject to extreme cold. Temperatures typically at or below 50 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity. + Subject to extreme heat. Temperatures above 100 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity. + Subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. + Physical Requirements: + Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Kuwait in support of WEXMAC*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Under supervision of Management Operations Center Manager, performs a full range of tasks to ensure V2X and its subcontractors have a culture of compliance and zero tolerance for Trafficking in Persons (TIPs) in accordance with (IAW) US Public Law (USPL), the Federal Acquisition Regulations (FAR), USG supplements thereto, as well as Local Laws. Manages employee trainings and implementing other management methods as assigned to ensure compliance with regulations and internal controls. Manages team that reviews and enforces compliance with standards or regulations imposed by contract requirements and the company’s internal guidelines. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Applies knowledge of international standards related to exploitative child labor, forced labor, and human trafficking to specific case contexts. International standards include C138; C182; C029; C105; social, political and economic factors contributing to child labor and forced labor; UN Convention on the Rights of the Child; trafficking in persons, in general; Executive Order 13126 – Prohibition of Acquisition of Products Produced by Forced or Indentured Child Labor; Trade and Development Act of 2000; FAR 52.222-50, KSCR1-2 and Trafficking Victims Protection Act. Conducts substantive legal and regulatory research on Human Trafficking &amp; labor issues. + Manages a the CTIPS training program and reviews training materials, compliance plans, pay slips, financials and program management practices/policies to ensure compliance to applicable requirements. Responds within 24 hours to allegations, audit findings or requests for investigation, compliance audits or advocacy services for potential victims of human trafficking. Receive, track and manage to closure allegations, requests for information and referrals. + Responsible for assessing the productivity, effectiveness, and efficiency of assigned program operations and objectives; + Ensures compliance with regulations and controls by examining and analyzing records, reports, operating practices, and documentation; recommending opportunities to strengthen the internal control structure. + Identification of noncompliance’s, and corrective actions; identification of ways to improve the efficiency and effectiveness of policies at both the program and Subcontractor level. + Supports external auditors by coordinating information and logistics support requirements. + Continually develops self-knowledge of issues of compliance, human trafficking, and related laws/ policies; Participates in all assigned or recommended training opportunities. Updates job knowledge by seeking out and participating in educational opportunities and reading professional publications + Adheres to the confidentiality policy regarding the company, its Subcontractors, as well as potential victims of trafficking. + Performs other duties as assigned Qualifications Minimum Qualifications: Education/Certifications: One year related experience may be substituted for one year of education, if degree is required. + High School Diploma; + Be able to obtain ISO 9001:2015 Auditor certification; + Ability to obtain host nation driver license. + Must be CAC eligible and/or ability to obtain a CAC Experience : + 2 - 3 years’ compliance, contract management, subcontract management, safety or quality experience with a minimum of one year auditing experience preferred. + 1 – 2 years in overseas contracting environment highly desirable. + Must have an understanding of DoD Human Trafficking regulations Skills + Attention to detail and strong communication, analytical, reporting and decision-making skills are among the most important traits a Compliance Auditor must have to be successful in this position. The ability to work both individually and in teams is also important. A Compliance Auditor should be particularly vigilant in following up to ensure that developed plans addressing compliance issues and problems have been implemented. + Proactive, hands-on strategic thinker who is approachable and comfortable working in partnership with all levels of staff; Able to work effectively and productively in a professional team environment; Ability to work independently and exhibits sound and accurate judgment + Demonstrated flexibility and openness in responding to changing work priorities; Planning and project management skills, and capable of multi-tasking in a dynamic environment; attention to detail and follow-up; Self-motived with excellent organizational skills. Ability to think critically and manage multiple tasks simultaneously; + Accuracy and the ability to communicate clearly and attention to detail are a must. Strong skill in effective verbal and written communications, including active listening skills and skill in presenting audit findings and recommendations. Ability to inspire and motivate participants and help them overcome barriers. + Ability to interpret statutes, regulations and guidelines + Maintain all organizational and professional ethical standards + Ability to demonstrate sensitivity to the cultural/ethnic diversity of the service population and to be sensitive to the needs of special populations + Able to promote teamwork Working Conditions: + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). Includes some industrial production environment conditions as well. Physical Requirements: + Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. If the use of arm and/or leg controls requires exertion of forces greater than that for sedentary work and the worker sits most of the time, the job is rated for light work. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Kuwait in support of WEXMAC*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Under the supervision of the HQ Government Property Director and Task Order Manager, manages the 10 life cycle outcomes of Property Management for the V2X program in accordance with FAR Clause 52.245-1, Performance Work Statement, and the Property Management Plan. Manage the company fiduciary accounts with the Theater Property and the Installation Property Book Office ensuring accuracy and compliance of records. Coordinate transfers and support to the customer in accordance with AR 735-5 for property and materiel responsibility transfers. Must be able to maintain a professional transparent relationship with auditing agency ensuring timely submissions and responses to all requested actions. Provides guidance on government regulations pertaining to property accountability; develops, recommends and implement property administration policy. Provide training, mentoring, effective and efficient management of all Government Furnished Property and Company Acquired Property for Vectrus. Coordinate with Property Custodians to ensure and maintain 100% accountability of Government Property in accordance with applicable Government regulations and Vectrus Property Management Plan. Ensures compliance with prescribed Vectrus Property Management Plan, Performance Work Statement, and Federal Acquisition Regulations. Provide the government with routine, monthly, special, and annual reports. Maintain an IUID registry for all assets procured or transferred that meets the governments requirements. Ensures all Government Furnished Property (GFP) and Contractor Acquired Property (CAP) are properly tracked, documented, and identified in Vectrus Property Book records. Maintain 100% accountability of all company property records through the Maximo Implementation System and must have knowledge of Army Supply System including DLIS Fed log. Provides management direction, training and oversight to include overseeing day to day property control operations; may include but not limited to Custodial record management, administrative adjustment reports, cyclic inventory reporting, proper storage of property, sensitive items inventories, receiving, shipping and preparation of all supporting documentation. Routinely visits all work locations to provide assistance and ensure that the program is being managed properly and effectively in accordance with prescribed directives. Perform duties involving requesting, receiving, issuing, accountability, and preservation of all GFP, and review complete work for accuracy and compliance with established procedures. Provide technical assistance to departments and upper management as needed. Manage and maintain through periodic maintenance, administrative records and submit program status reports IAW established project operating procedures (POP), standard operating procedures (SOP), work instructions (WI) and the contract. Perform duties involving LOSS process through the Property Administrator Reach Back Program, and request for Letter of Technical Direction (LOTD) for gains or losses for assets not procured or disposed of by routine methods. Performs other duties as required. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Manages the 10 life cycle outcomes of Property Management for the V2X program in accordance with FAR Clause 52.245-1, Performance Work Statement, and the Property Management Plan. + Manage the company fiduciary accounts with the Theater Property and the Installation Property Book Office ensuring accuracy and compliance of records. + Coordinate transfers and support to the customer in accordance with AR 735-5 for property and materiel responsibility transfers. + Must be able to maintain a professional transparent relationship with auditing agency ensuring timely submissions and responses to all requested actions. + Provides guidance on government regulations pertaining to property accountability; develops, recommends and implement property administration policy. + Provide training, mentoring, effective and efficient management of all Government Furnished Property and Company Acquired Property for V2X. Qualifications Minimum Qualifications: + + Bachelor’s degree and two years’ experience or High School diploma and eight years’ experience. + One year related experience maybe substitute for one year of education, if degree is required. + A minimum certification of a Certified Property Professional Administrator from the National Property Management Agency. + Must be CAC eligible and/or able to obtain a Common Access Card (CAC) + Must be a U.S. Citizen + A valid driver’s license and the ability to obtain a U. S. Government Motor Vehicle Operator’s License and host nation Driver’s License, is required. Experience: + + Minimum of 6 years specialized experience in property management operations. + Must be familiar and able to train Property Management operating systems. + Must be familiar with appropriate FAR, DFAR’s, AR’s (Army Regulations) and correct publications concerning 10 Lifecycle outcomes. Skills: + + Must exhibit strong organization and communication skills. + Must feel comfortable delegating and possess skills to include scheduling workers, keeping track of staffing and keeping their staff motivated. + The most significant experience is education or training from work experience in a related occupation. Supervisory Responsibilities: + + Supervises a department consisting of approximately 30 personnel Working Conditions: + + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. Physical Requirements: + + Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>