Security inspector Jobs - Capital Governorate (Kuwait) Kuwait

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Kuwait in support of WEXMAC*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Supervises custodial personnel and manages assigned area of responsibility, including scheduling daily activities, managing appropriate leaves, supervision of duties, and inspection of areas. Will assist in the setup of special events. Ensures personnel exhibit superior workmanship and focus on a quality end product. Follows Standard Operating Procedures (SOPs) to ensure all tasks are accomplished safely. Verifies actual hours worked by personnel to reduce manpower expenditure. Ensures personnel complete all tasks in accordance with the local Environmental, Safety and Health directives. Provides leadership and mentors junior personnel to develop appropriate skillsets. Addresses customer concerns in a prompt, professional and courteous manner. Uses Computer Maintenance Management System (Maximo) to correctly input data related to maintenance work orders, preventative maintenance inspections, and emergency/urgent customer requests. Ensures personnel correctly capture data on maintenance work order requests and preventative maintenance inspection forms for upload into Maximo. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Ensures that all assigned areas are cleaned in accordance with PWS and industry standard + Monitors the work of staff responsible for providing custodial services related to the care, maintenance and cleaning of assigned buildings and facilities + Facilitates planning, coordinating, directing and controlling activities performed by custodial and landscaping personnel + Performs inventory control and transports supplies to various work sites; monitor the use and care of the supplies and equipment + Performs routine inspections of assigned areas and evaluates the work of employees against established standards + Directs or performs a variety of tasks which may include, but is not limited to, moving or setting up furniture, sand removal, sweeping walkways, bathroom checks, waxing floors, and other miscellaneous cleanup + Maintain adequate supplies in utility closets and custodial carts + Ensures training needs are met, and employees are counseled on job performance + Develops information, maintains records, and prepares a variety of reports e.g. custodial workloads, service requirements and employee job performance + Performs other duties and assignments as required Qualifications Minimum Qualifications: + + High School diploma plus vocational training in administrative sciences, Associate degree preferred + Must possess a driver’s license for the purpose of obtaining a military and/or Kuwait driver’s license OCN Experience: + + Requires eight (8) years custodial experience + Requires three (3) years supervisory experience – custodial field preferred Supervisory Responsibilities: + + Will have direct oversight of junior custodians. Skills: + + Interpersonal skills, and dexterity are needed to maintain holistic management of the custodial department, because this is an area that requires constant problem solving skills as maintenance issues, supply issues, and personnel issues + Communication and interpersonal skills are needed to manage personnel and to exceed the customer’s expectations + Requires ability to analyze the operation of various infrastructure systems, determine the cause of problems/malfunctions, and take corrective actions as required + Knowledge of U.S. Army Safety Guidelines and OSHA Standards Working Conditions: + + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. Physical Requirements: + + Medium to Heavy Work Exerting up to 50 to 100 pounds of force occasionally, and/or up to 20 to 50 pounds of force frequently, and/or up to 10 to 20 pounds of force constantly to move objects. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Kuwait in support of WEXMAC*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The Water Compliance Supervisor will assist with the day-to-day operation of compliance and monitoring activities of drinking water and wastewater program. Support SOW services in the areas of drinking water, wastewater treatment and collection, and sampling. The Water Compliance supervisor will oversee the water, and wastewater compliance specialist that collect samples and perform inspections to ensure compliance with the applicable environmental and DoD regulations. Provide training, feedback, development, timecard approval, counseling on performance for direct reports. Ensure weekly reports are completed and submitted to the Sr. Engineer and the information is accurate. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Responsible for training and evaluating water and wastewater compliance specialist. Training includes instructing specialist on work instruction, standard procedures of operations, as well as proper sampling collect techniques and inspections. + Scheduling and implementation of all water quality sampling activities, wastewater treatment and collection, compliance inspections and confirm that the specialists can perform proper field sample techniques. + Collect ice and water samples, wastewater samples, and conduct inspection, as needed. + Ensure specialists are completing and submitting water analytical reports correctly for verification. + Maintain appropriate and accurate records of water and wastewater sampling and inspection reports, chain of custody records, and other written correspondence on share drive. + Provide data and assist in the revision of work instructions, standard operation procedures and plans, and assist in quality audits. + Assists with the preparation of sampling and management reports. + Able to interpret and maintain current knowledge of DoD, U.S. Army, and host nation water regulations (i.e., OEBGD, Final Governing Standards, and AR 200-1). + Coordinate and assist with other departments and installation with environmental needs, as required. + Report any environmental issues and concerns involving water compliance to Sr. Environmental Engineer and/or management. + Must be able to drive and obtain a valid driver’s license and host nation driver’s license. + Submit weekly reports/slide presentations and ensure the data is accurate. + Perform other duties or tasks as assigned. Qualifications + Minimum Qualifications: Education/Certifications: One-year related experience may be substituted for one year of education, if degree is required. + Must be CAC eligible and/or able to obtain a Common Access Card (CAC) + Must be a U.S. Citizen + A valid driver’s license and the ability to obtain a U. S. Government Motor Vehicle Operator’s License and host nation Driver’s License, is required. + Bachelor's degree in environmental management program or an OSHA related field. + Skill level and/or years of experience: + Prior experience working as EHS specialist, environmental health and safety assistant, environmental health and safety professional, Health Safety consultant. + Licenses/Certifications: + Certified Environmental Specialist, Training/Certification HAZWOPER: 40-Hr, maintain the annual 24-hr, or 8-hr. course whichever is required. + Skills: + Ability to inspect all ESH material or HAZMAST material holding stations, monitor and document all material movements, from initial receipt to written confirmation of acceptance at the destination + Ability to Ensure that all EPA, OSHA and DoD regulations are implemented. + Ability to schedule and hold training sessions on all aspects of the program functional areas. + Working Conditions: + Must be capable of working in an extreme weather condition with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, duty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. + Physical Requirements: + Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p><br></p><p>Reports to the TLSF Manager. Responsible for the full spectrum of maintenance operations; oversee Go/No-Go Testing of all government furnished equipment retrograded from the forward deployed sites for redistribution. Manages refurbishment programs for deep cleaning, upgrade, repair and configuration of IGX and other electronic systems. Directs and supervises Maintenance Support Teams (MST) supporting communication towers, telephony switching systems, and other communication systems. Manage field and sustainment maintenance to all strategic communications systems under the command of the 160th Signal Brigade, its subordinate units and the RCC. Monitors production for compliance with scheduling directives, cost factors, and standards. Develops performance standards, conducts employee counseling, and makes suggestions for formal and informal performance appraisals. Manages the calibration of Government Furnished Property (GFP) test equipment assigned to the Program. Directs, controls, and supervises antenna and tower maintenance in their respective countries, or areas they may be deployed too. Plans and coordinates scheduled maintenance visits for antenna/towers as required. Responsible for providing trip reports to the TLSF Manager as work is performed and completed. Performs a variety of duties pertaining to the operation, maintenance and repair of antennas and associated mounting hardware, tower systems, waveguide, lighting equipment and grounding systems. Will be responsible for accountability of Government Furnished Property (GFP) in their possession or under their control.</p><p>Program: OMDAC-SWACA</p><p>This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position.</p><p>Responsibilities</p><p>Provides guidance and mentoring to personnel assigned to the section. Processes Purchase Requests required to support daily maintenance operations. Reviews receipt, control and processing of work orders. Collects and analyzes data necessary to manage resources. Monitors material stock level to support maintenance activities. Advises the Program Management of the status of work orders and scheduling of maintenance schedule. May be required to prepare and present briefs on maintenance-related activities. Maintains situational awareness of logistics and maintenance activities at all operational sites, including the status of any operational, maintenance, and resource issues, including the glide path for the resolution of any of these issues. Manage and monitor the Test, Measurement and Diagnostic Equipment (TMDE) Repair and Calibration program. Ensures obligations are being fulfilled as per the Performance Work Statement (PWS). Monitors staffing levels and creates projections to ensure proper manning is maintained in all situations; to include adequate coverage during vacation/holiday periods and for replacement of personnel who are projected to depart. Provides direct communication and coordination with associated military counterparts (such as Brigade S-4 and S-3) to facilitate mission support. Establishes rapport and effectively maintains liaison and coordination between the working elements of the department, management, customers and staff. Help develop best/alternative solutions to maintain smooth operations. Will work with and in conjunction with other departmental sections to accomplish all required taskings. Supervises and directs the Antenna Maintenance Support Team (AMST) in the performance of on-site and off-site routine and emergency maintenance support on towers, antennas, transmission lines and associated equipment. Perform quality assurance/quality control inspections on work performed. Performs organizational level repair maintenance through off-site general Support maintenance of support equipment including disassembly, testing, fault isolation and piece part replacement. Also performs technical inspections to determine maintenance requirements and approximate repair costs. Coordinates with sites and Operations and Maintenance staff in scheduled/unscheduled maintenance to ensure maximum system availability is maintained. Conducts, attends, and prepares for meetings and briefings as required. Performs other duties and assignments assigned.</p><p><b>Qualifications</b></p><p>Security Clearance: Ability to obtain a National Agency Check with Inquires (NACI) in order to obtain a Common Access Card (CAC). Ability to obtain and maintain a Secret level security clearance is preferred.</p><p>Education / Certifications:</p><p>One-year related experience may be substituted for one year of education if a degree is required. High School diploma or GED required. Cardiopulmonary Resuscitation (CPR) Training &amp; Certification ( Provided by the contract. ) Tower training: Tower Safety &amp; Rescue; Height &amp; Harness Safety Course or equivalent Requires a training certificate which meets one of the following requirements: OSHA 1910 ( Fall Protection Requirements ) OSHA 1926 ( Fall Protection Requirements ) ANSI/ASSE Z359</p><p>Experience:</p><p>One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience. Experience with a customer service-oriented company. 3-5 years of supervisory preferred. Must have knowledge and comply with OSHA 29 CFR Standard 1PHONE_NUMBER for all tower and antenna work. Must have the ability to comprehend and interpret complex technical data. Must have familiarity with logistical, maintenance, and purchasing operations. Must be familiar with maintenance operations, transportation, logistical, supply and services, military operations. Experience with a customer service-oriented company.</p><p>Skills &amp; Technology Used:</p><p>Proficiency in using a computer - desktop or laptop. Proficiency in using Microsoft productivity software. Proficiency in using Email client software. Other software / work management tools as directed Harness and fall protection equipment</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Ability to obtain a National Agency Check with Inquires (NACI) in order to obtain a Common Access Card (CAC).</li><li>Ability to obtain and maintain a Secret level security clearance is preferred.</li><li>High School diploma or GED required.</li><li>Cardiopulmonary Resuscitation (CPR) Training &amp; Certification ( Provided by the contract. )</li><li>Tower training: Tower Safety &amp; Rescue; Height &amp; Harness Safety Course or equivalent</li><li>Requires a training certificate which meets one of the following requirements: OSHA 1910 ( Fall Protection Requirements ) OSHA 1926 ( Fall Protection Requirements ) ANSI/ASSE Z359</li><li>One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience.</li><li>Experience with a customer service-oriented company.</li><li>3-5 years of supervisory preferred.</li><li>Must have knowledge and comply with OSHA 29 CFR Standard 1PHONE_NUMBER for all tower and antenna work.</li><li>Must have the ability to comprehend and interpret complex technical data.</li><li>Must have familiarity with logistical, maintenance, and purchasing operations.</li><li>Must be familiar with maintenance operations, transportation, logistical, supply and services, military operations.</li><li>Proficiency in using a computer - desktop or laptop.</li><li>Proficiency in using Microsoft productivity software.</li><li>Proficiency in using Email client software.</li><li>Other software / work management tools as directed</li><li>Harness and fall protection equipment</li><li>Must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position.</li></ul>

Responsibilities<br><br>What will I be doing?<br><br>Responsibilities<br><br>As Guest Relations Executive, you will directly address the needs of VIP Guests and inform other Team Members of VIP needs in order to ensure an exceptional Guest experience. A Guest Relations Executive is responsible for managing the first impressions of our Guests and, therefore, must perform the following tasks to the highest standards:<br><br>Meet, greet and direct Guests who enter the lobby area Serve as the main point of contact for VIP Guests and ensure hotel departments are fully briefed on their requirements Seek verbal feedback from customers on a regular basis and respond to all Guest queries in a timely and efficient manner Serve as a point of contact for long-stay Guests of 14 days or longer ensuring they feel comfortable and can ask advice or information from Guest Relations Manage, record and resolve promptly Guest or customer complaints Ensure a very high level of customer service is constantly maintained for Reception, Lobby area and Executive Lounge Demonstrate a thorough understanding of all facilities and services provided within the hotel and identify opportunities for up-selling and promoting when appropriate Show creativity with ideas regarding lobby/reception decoration at suitable seasonal time periods in order to enhance the overall image and warmth of this area for the Guest Communicate with the Executive Lounge Manager and track and reward regular Guests for their loyalty and creativity; choose rewards that meet Guest preferences while remaining within the allocated budget Maintain good communication and work relationships in all hotel areas Maintain staffing levels to meet business demands Attend all Reception meetings and Executive Lounge Meetings Comply with hotel security, fire regulations and all health and safety legislation Act in accordance with policies and procedures when working with front of house equipment and property management systems Assist with other departments, as necessary<br><br>Qualifications<br><br>What are we looking for?<br><br>Skills<br><br>Guest Relations Executives serving Hilton brands are always working on behalf of our Guests and working with other Team Members. To successfully fill this role, you should maintain the attitude, behaviours, skills, and values that follow:<br><br>An ability to listen and respond to demanding Guest needs Excellent leadership, interpersonal and communication skills Accountable and resilient Commitment to delivering a high level of customer service Ability to work under pressure Flexibility to respond to a variety of different work situations<br><br>It would be advantageous in this position for you to demonstrate the following capabilities and distinctions:<br><br>Previous experience in a customer service function or in a similar role A passion for delivering an exceptional level of Guest service High level of IT proficiency<br><br>What will it be like to work for Hilton?<br><br>Hilton is the leading global hospitality company, spanning the lodging sector from luxurious full-service hotels and resorts to extended-stay suites and mid-priced hotels. For nearly a century, Hilton has offered business and leisure travelers the finest in accommodations, service, amenities and value. Hilton is dedicated to continuing its tradition of providing exceptional guest experiences across its global brands . Our vision “to fill the earth with the light and warmth of hospitality” unites us as a team to create remarkable hospitality experiences around the world every day. And, our amazing Team Members are at the heart of it all!

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Please submit your CV in English and indicate your level of English proficiency.<br> Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems.<br> Participation is project-based, not permanent employment.<br> About the Role You’ll design coding tasks that challenge frontier AI coding agents.<br> Each task is a self-contained Docker environment with a broken piece of software; an AI agent attempts the fix; automated tests verify the outcome.<br> Your deliverable is the full task package: broken code, tests, instructions, and a reference solution proving the task is solvable.<br> Responsibilities : Invent a realistic developer scenario — a real bug, a broken ETL, a missing feature — not a toy problem.<br> Build a reproducible Docker environment with pinned dependencies.<br> Write a pytest that verifies outcomes, not specific commands — deterministic, non-flaky, and does not leak the fix.<br> Write an instruction.<br>md that reads like a Jira ticket a developer would receive.<br> Write a reference solve.<br>sh proving the task is solvable.<br> Calibrate difficulty so current state-of-the-art agents solve the task 20–60% of the time.<br> Iterate based on feedback from expert QA reviewers.<br> Later: review other authors’ tasks as a QA reviewer.<br> Not in scope Data labeling, prompt engineering.<br> Production code to ship — you design problems and verification for AI agents.<br> Leetcode puzzles — scenarios must look like real developer work.<br> Not every candidate task ships — quality over quantity.<br> Requirements 3+ years of production software development in one backend stack — Python, Go, Node.<br>js, Java, or Rust.<br> Depth in one stack beats breadth.<br> Python + pytest fluency — required regardless of primary stack.<br> The task harness is pytest-based even when the broken app is in another language.<br> Fixtures, parametrize, monkeypatch, timeouts, conftest.<br>py. Docker authoring — reproducible Dockerfiles, pinned dependencies, multi-stage builds when needed, non-root user.<br> Linux &amp; Bash — comfort debugging inside containers (strace, lsof, journalctl); shell beyond set -euo pipefail.<br> AI coding agent experience — Claude Code, Cursor, Roo Code, or similar, on non-trivial work.<br> You can cite a specific time the AI was confidently wrong and how you caught it.<br> English — B2+ written.<br> Not a fit Data Science, ML, or Computer Vision engineers without backend-engineering output.<br> Manual QA testers without automation or test authoring.<br> Frontend-only, low-code / no-code, IT Support, or Business Analysts.<br> Engineers who have never written pytest from scratch.<br> Junior, intern, or assistant as the most recent role.<br> Preferred qualifications Domain depth in Security, System Administration (nginx / systemd / cron), Scientific Computing (NumPy / PyTorch / SciPy), DevOps, or Git internals.<br> Modern Python tooling (uv, poetry, pyproject.<br>toml). Coverage tooling (pytest-cov, coverage.<br>py, gcov, llvm-cov, kcov).<br> Fuzzing or property-based testing (Hypothesis).<br> Prior contribution to agent-evaluation benchmarks or related frameworks.<br> Process Apply → Pass qualification (90-minute sample-task screen + short behavioral interview) → Join a project → Complete tasks → Get paid.<br> Time commitment Onboarding: ~10 hours per first task.<br> Steady state: ~5 hours per task, 2–4 parallel tasks per author.<br> Realistic weekly load: 8–20 hours.<br> Higher volume available for top performers.<br> You choose when and how to contribute; tasks must be submitted by the deadline and meet acceptance criteria.<br> Compensation: Paid contributions, rates up to $35/hour *.<br> Task-based compensation equivalent to hourly rate, depending on performance and volume.<br> Some projects include incentive payments.<br> *Rates vary based on expertise, skills assessment, location, project needs, and other factors.<br> Higher rates may be provided to highly specialized experts.<br> Lower rates may apply during onboarding or non-core project phases.<br> Payment details are shared per project.<br> Apply Submit your CV via the Mindrift platform.<br> Indicate your English level, note this role (Software Engineering Evaluation Specialist — Terminal Bench), and include a GitHub profile link if available.<br></span> </div>

<p>We are seeking an experienced Senior Corporate Card acquisition manager with experience in virtual payment solutions to drive the growth, commercialization, and adoption of corporate cards solutions in a leading issuer in Kuwait.</p><p>The ideal candidate will bring extensive experience from the payments solutions industry or a leading financial institution, with a strong background in commercial cards, virtual payments, virtual cards, B2B payments, T&amp;E solutions, corporate client acquisition, and relationship management.</p><p>The role will focus on expanding the corporate payments portfolio, developing strategic partnerships, driving client acquisition and onboarding, supporting product commercialization initiatives, and managing key corporate relationships across large enterprises, government entities, and multinational organizations.</p><p><strong>Core Responsibilities and Accountabilities:</strong></p><p><strong>Commercial Card &amp; B2B Payments Growth:</strong></p><ul><li>Drive acquisition of new corporate clients for commercial card, Virtual cards and B2B payment solutions</li><li>Develop and execute sales strategies to grow corporate card spend, virtual card volumes on supplier payments, procurement, T&amp;E solutions</li><li>Identify opportunities across T&amp;E, procurement, accounts payable, fleet, purchasing, and virtual card use cases.</li><li>Build and manage a pipeline of corporate opportunities across large corporates, SMEs, and government entities.</li></ul><p><strong>Product Commercialization &amp; Enablement:</strong></p><ul><li>Develop go-to-market plans for commercial card and payment solutions.</li><li>Execute client outreach campaigns, sales enablement activities, and product awareness initiatives.</li><li>Create use-case-led value propositions tailored to key industry segments.</li><li>Coordinate product launches, client onboarding, and implementation activities.</li></ul><p><strong>Implementation &amp; Stakeholder Management:</strong></p><ul><li>Partner with operations, risk, product, and implementation teams to ensure seamless onboarding.</li><li>Support client implementation of corporate card programs, virtual card solutions, and expense management capabilities.</li><li>Monitor onboarding progress and address client issues proactively.</li><li>Ensure a high-quality customer experience throughout the sales and implementation lifecycle.</li></ul><p><strong>Client Management &amp; Portfolio Development:</strong></p><ul><li>Manage strategic relationships with CFOs, finance directors, procurement heads, and treasury teams.</li><li>Conduct clients need assessments and identify opportunities for upsell and cross-sell.</li><li>Drive portfolio expansion through increased card penetration and incremental spend capture.</li><li>Serve as a trusted advisor on payment optimization and working capital strategies.</li><li>Ensure a high-quality customer experience throughout the sales and implementation lifecycle.</li></ul><p><strong>Strategic Partnerships:</strong></p><ul><li>Identify and develop strategic partnerships with fintechs, travel management companies, ERP providers, and procurement platforms.</li><li>Collaborate with ecosystem partners to accelerate implementation and portfolio growth.</li><li>Drive engagement with internal and external stakeholders to execute strategic growth initiatives.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>8-15 years of experience in Commercial Cards, Corporate Payments, B2B Payments, Corporate Banking, Business Development, Portfolio Management, Corporate Sales.</li><li>Demonstrated experience engaging with CEOs, CFOs, Treasury Teams, Procurement Leaders, Finance Directors, Corporate Decision Makers.</li><li>Strong network within corporate banking and large enterprise sectors.</li><li>Proven track record of exceeding revenue and portfolio growth targets.</li><li>Passion for driving adoption of innovative payment solutions and digital commercial payment products.</li><li>Mandatory Skills: Previous experience within Banking, Digital Payment &amp; Card solutions or the FinTech industry.</li><li>Strong background working with corporate payment solution providers.</li><li>Regional experience across the GCC, including working in a faced-paced matrix organisation.</li><li>Excellent communication skills in English (written, verbal, and presentation); Arabic preferred.</li><li>Preferred Skills: The ability to analyse data, troubleshoot payment issues, optimize processes, and make data-driven decisions.</li><li>Good understanding of payment systems, digital platforms, system workflows, security basics, and industry technologies.</li><li>An understanding of regional regulations across financial services or payment networks.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Ensure staff is working together as a team. Inspect grooming and attire of staff and rectify any deficiencies. Communicate with guests, other employees, or departments to ensure guest needs are met. Respond to and try to fulfill any special banquet event arrangements. Set up banquet area/room, ensuring cleanliness and proper set up of furniture/equipment. Inspect and maintain table set-ups for cleanliness, neatness and agreement with group requirements and company standards, and resolve any problems. Document pertinent information in appropriate department logbook.<br>Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees. Develop and maintain positive working relationships with others, and support team to reach common goals. Follow all company and safety and security policies and procedures; report accidents, injuries, and unsafe work conditions to manager; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Speak with others using clear and professional language, and answer telephones using appropriate etiquette. Ensure adherence to quality expectations and standards. Read and visually verify information in a variety of formats (e.g., small print). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and objects weighing in excess of 75 pounds with assistance. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested.<br>PREFERRED QUALIFICATIONS<br>Education: High school diploma or G.E.D. equivalent.<br>Related Work Experience: At least 1 year of related work experience.<br>Supervisory Experience: At least 1 year of supervisory experience.<br>License or Certification: None<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>At Courtyard, we’re passionate about better serving the needs of travelers everywhere. It’s what inspired us to create the first hotel designed specifically for business travelers, and it’s why the Courtyard experience today empowers our guests, no matter the purpose of their trip. We’re looking for achievers who are passionate about providing a guest experience that goes above and beyond, enjoy being part of a small yet ambitious team, and love learning how to always improve – all while having fun. <br>In joining Courtyard, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<p>As Store Manager, you will be responsible for the customer journey, services and operational service management within the store.Responsible to lead, support, coach, and translating the service vision and plans into tangible actions enabling store leaders and store team to reach and exceed their service targets.Build, develop, and implement store service plans to maximize sales and KPIs performance. Key Accountabilities Client Experience Embody Sephora Attitude and set an example in front of the team. Provide support to the team in difficult situations ensuring client s satisfaction. Provide extensive coaching and training to assist the team in meeting all commercial and operational KPI s. Take over floor leadership segments and ensure the floor is always managed and covered. Energize and motivate the team through effective floor management to guarantee an addictive experience for our clients. Use suitable tools for analyzing overall satisfaction and propose action plans to enhance the customer experience. Inspire the team to use digital tools to deliver a customized service. Work in partnership with the Supervisor and coach the team to offer our Beauty Services to maximize client satisfaction. Provide support for the Area Manager in analyzing results and proposing action plans to enhance client experience. Maintain and enforcing quality customer service and resolve customer service complaints. People Motivate and develop the team through daily coaching / observations. Communicate and inspire the team on business strategy, vision and relevant information through animate briefings, coaching s, and trainings. Increase the team confidence and motivation by praise and feedback for their performance. Identify, engage in recruiting, and develop talents and secure succession plans in collaboration with the Area Manager. Ensure the team is attending training and follow up is done after the training is attended. Ensure the team is using E-learning tools; daily follow up on average training frequency for each team member. Ensure an addictive beauty experience through performing monthly assessments. Facilitate team monthly meetings to analyze and discuss their performance. Be responsible for the Development and improvement plans of the entire assigned team. Oversee the annual leave of the team and liaise with the Area Manager for final validation according to business needs. Sales Inspire the team in achieving commercial and operational KPI s and create improvement plans to drive them. Reinforce sales policies and techniques established at the Sephora University with all team members. Balance and drive the sales target. Achieve the desired market share for services. Ensure achievements by hour are shared with colleagues and are an active part of animating the floor and motivating the team. Create disruptive internal competitions to motivate the team and boost the achievements. analyzing the results achieved during the shift/floor leadership segment and create action plans during the day to achieve set target. Operations Apply the policies and procedures referring to products, testers, prices, merchandising and other partners (Brands, helpers, security) and provide feedback. Contribute to the store projection of an excellent image through cleanliness and product restocking. Enforce the team to apply and follow established policies and procedures regarding store operations. Accurately monitor stock availability Propose podium order and track daily performance. Drive all operational KPIs and create improvement plans for each. Align with Category Departments on Shelving plans, novelties, brand relocations, gird changes etc... and communicate to your assigned team. Business Provide support to the Area Manager with knowledge of the market conditions, competition, client needs, etc. Analyze all relevant KPIs and propose action plans for improvement. Develop and propose short- and long-term strategies to drive top and bottom line/brands sales. Manages business KPIs and team selling behavior in our higher volume stores, while delivering a memorable customer experience. Proactively provide product recommendations and qualitative feedback based on local knowledge about the market and client needs. Put in place action plans to boost business and maximize product performance, leveraging visual merchandising, training, and monthly trends. Plan, implement and oversee in-store promotional events or displays. Following trends and perform market visits and analyses to understand the local market and work to determine business growth opportunities. Ensure all Business reports are completed efficiently when required. Know How Project an exceptional image and body language in accordance with the guidelines set by Sephora. Keep up to date on trends and products. Inspire, mentor and coach the team. Transfer knowledge and create a highly performing culture in the store.</p><p><strong>Desired Candidate Profile</strong></p><p>Skills &amp; Experience Requirements: Advanced Product Knowledge. Intermediate knowledge on health and safety procedures. Proven successful role in managing. Minimum 5 years experience in store management. Bachelor's degree. English advanced level Arabic is a plus Most importantly, She/he needs to live and breathe the Sephora Culture, DNA and Employee Value propositions (EVP) with a passion for people and making a difference. She/he need to have excellent authentic communication and influencing skills and be energized by working in a fast paced, dynamic environment. HERE, YOU WILL FIND:Community, in which authenticity is embraced, and the strength of our differences fuels our collective spiritCulture of empowerment, learning &amp; growth, that offers you the tools, space and opportunity to learn, innovate and leadWork that brings fulfillment. From delighting clients every day, to inspiring our industry at large, every action makes a difference. Join us and belong to something beautiful.</p>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential Responsibilities</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship. USAF equivalent position is Aircraft Mechanic Apprentice. Essential Responsibilities: Performs all daily launch/recovery duties in support of operational requirements. Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems. Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion. Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools. Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs. Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft. Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks. May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Must be able to work with little-to-no supervision. Performs all other duties as assigned as requested.</p><p><strong>Desired Candidate Profile</strong></p><p>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum. Minimum of one year of actual Aircraft Mechanic maintenance experience required. Must have basic knowledge of basic and complex mechanical maintenance and repair. Must possess basic knowledge of technical publications related to aircraft mechanical maintenance. Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems. Must be able to inspect and operate ground support and auxiliary equipment. Must achieve a passing grade in all required courses/certifications for continued employment, as needed. Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment. Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods. Must be able to speak, read, write, and understand English. Must submit updated SF-86 within 30 days of hire start date. Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance. Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment. Must have current/active State Issued Driver s License. Must be able to acquire and maintain a valid flight-line Government Driver s License. Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages. Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</p> <p>Associate degree in a relevant career field. Licensed by the FAA as an Airframe and Powerplant Mechanic. RPA Deployment Experience. Prior Experience as a Defense Contractor. Aircraft Mechanic Experience within the last 10 years. MQ-9 Experience as an Aircraft Mechanic. MQ-9 Aircraft Composite Repair / Replacement Experience.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>ASAB ESS: Alternate Site Manager (Secret Clearance)<br><br><p><b>Belong, Connect, Grow, with KBR! </b></p><br><br><br><p><b>Program Summary</b></p><br><br><p><b>KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Logistics Support (SWA Log). These services provide inventory management, property accountability, equipment movement, and logistics coordination for U.S. Air Force operations across multiple locations in Southwest Asia. Alongside SWA Logistics, KBR delivers Engineering Support, NTV Leasing, LAMS, Power Production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</b></p><br><br><br><p><b>Job Summary</b></p><br><br><p>The Alternate Site Manager / Mechanical Engineer serves in a dual role supporting the successful execution of Engineering Support Services at AASAB and associated sites. The position provides mechanical engineering expertise while also supporting the Site Manager with the day-to-day leadership, coordination, and administration of Task Order activities.</p><br><br><p>In the absence of the Site Manager, the Alternate Site Manager (ASM) will assume responsibility for site operations and serve as the primary KBR representative for coordination with Government personnel, subcontractors, employees, and other mission partners. The position ensures work is performed safely, efficiently, and in accordance with the Performance Work Statement (PWS), Task Order Management Plan (TOMP), applicable Air Force requirements, engineering standards, and KBR policies.</p><br><br><p>As the Mechanical Engineer, the employee will provide technical engineering support related to mechanical systems, facility infrastructure, utilities, HVAC, plumbing, fire protection, mechanical equipment, and other installation engineering requirements.</p><br><br><br><p><b>Roles and Responsibilities </b></p><br><br><ul><li>Assist the Site Manager with the overall management and execution of Engineering Support Services at AASAB and associated locations.</li><li>Assume Site Manager responsibilities during the Site Manager’s absence and provide continuous leadership and operational oversight.</li><li>Serve as a primary point of coordination between KBR personnel, Government representatives, subcontractors, and mission partners.</li><li>Provide professional mechanical engineering support for facilities, utilities, infrastructure, and installation engineering requirements.</li><li>Evaluate existing mechanical systems and provide recommendations for repair, replacement, modification, or improvement.</li><li>Support HVAC, plumbing, piping, pumps, water systems, wastewater systems, fire protection, mechanical equipment, and other facility infrastructure.</li><li>Conduct facility assessments, field investigations, site surveys, inspections, and technical evaluations.</li><li>Review mechanical drawings, specifications, calculations, scopes of work, technical submittals, shop drawings, and Requests for Information (RFIs).</li><li>Support the planning, programming, design, execution, inspection, acceptance, and closeout of engineering and construction projects.</li><li>Assist with the preparation of Statements of Work, technical requirements, cost estimates, project packages, schedules, and engineering documentation.</li><li>Coordinate mechanical requirements with civil, electrical, structural, architectural, and other engineering disciplines.</li><li>Ensure engineering recommendations and project execution comply with applicable Unified Facilities Criteria (UFC), Air Force requirements, OSHA standards, codes, and accepted engineering practices.</li><li>Monitor Task Order performance and ensure work is performed in accordance with the PWS, Task Order Management Plan (TOMP), applicable regulations, and established performance standards.</li><li>Support the development, implementation, and maintenance of the TOMP and identify changes in scope, workload, staffing, or Government requirements that may require updates or contractual modification.</li><li>Coordinate staffing, scheduling, training, equipment, tools, vehicles, and other resources required to accomplish mission requirements.</li><li>Ensure personnel performing assigned work are properly trained, qualified, and competent through education and experience.</li><li>Monitor employee performance, productivity, safety, quality, and compliance with established procedures.</li><li>Identify operational, technical, schedule, and performance risks and develop appropriate mitigation strategies.</li><li>Provide technical support during equipment failures, utility outages, emergency repairs, and other mission-critical situations.</li><li>Prepare and support reports, briefings, schedules, staffing updates, performance metrics, engineering documentation, and other required Task Order deliverables.</li><li>Participate in Government meetings, project reviews, site inspections, construction meetings, and technical coordination activities.</li><li>Maintain effective communication with Government customers and provide timely updates regarding technical issues, project status, risks, and emerging requirements.</li><li>Promote a strong safety culture and ensure work is properly planned and executed in accordance with KBR, Air Force, OSHA, and site-specific safety requirements.</li><li>Maintain accurate documentation of engineering findings, inspections, recommendations, project status, corrective actions, and completed work.</li><li>Support personnel accountability, workforce planning, and day-to-day site administration as required.</li><li>Travel between AASAB and associated sites as necessary to support mission and engineering requirements.</li><li>Perform other duties and responsibilities necessary to support successful Task Order execution and the mission of the 386th Air Expeditionary Wing and its mission partners.</li></ul><p><b>Basic Qualifications </b></p><br><br><ul><li>U.S. National (USN) with an active Secret Security Clearance</li></ul><ul><li>Bachelor's degree in Mechanical Engineering from an accredited institution.</li><li>Demonstrated professional experience in mechanical engineering, facilities engineering, construction management, installation engineering, or a related field.</li><li>Previous leadership, supervisory, project management, or site management experience.</li><li>Experience supporting facility mechanical systems such as HVAC, plumbing, piping, pumps, utilities, and related infrastructure.</li><li>Ability to interpret engineering drawings, specifications, technical standards, and construction documents.</li><li>Knowledge of engineering design, construction, inspection, maintenance, and project execution processes.</li></ul><p><b>Preferred Qualifications</b></p><br><br><ul><li>Professional Engineer (PE) license or Engineer-in-Training (EIT) certification.</li><li>Previous AFCAP, U.S. Air Force, Department of Defense, or contingency operations experience.</li><li>Previous experience working at an overseas military installation or deployed location.</li><li>Experience managing multidisciplinary engineering teams.</li><li>Experience supporting U.S. Air Force Civil Engineer or installation engineering organizations.</li><li>Familiarity with Unified Facilities Criteria (UFC), Department of the Air Force Instructions (DAFI), OSHA requirements, and applicable U.S. building and engineering codes.</li></ul><br><p><b>KBR Benefits</b></p><br><br><p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance, AD&amp;D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development.</p><br><br><br><br><br> </div>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential Responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneumatic/hydraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, including pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<p><strong>Job Overview</strong> Weatherford is seeking a skilled and results-driven Field Specialist IV MPD to join our team. This pivotal role is responsible for optimizing MPD and drilling processes, enhancing efficiency, and driving profitability. The ideal candidate will work closely with country and regional team to ensure accurate reporting and compliance. Additionally, this role plays a key part in conducting Operations safely and with minimal interruption to drilling. The job requires occasional package preparation in the Weatherford base where full compliance to Weatherford performance standards is required.</p><p><strong>Responsibilities:</strong> Conducts maintenance of the Managed Pressure Drilling Services equipment at the job site and workshop when required. Responsible for managing all aspects of the field/offshore Directly responsible for the safe delivery of all MPD related services onsite. On call 24hrs while on site. Responsible for daily MPD reporting, hydraulic calculations, simulations and supervises shift personnel. At the discretion of product line management (such as the Engineering Manager, Operations Manager, or their designee) will be responsible for working in the shop. This will include but not limited to green tagging, preparing, and/or assisting with shipping equipment to job site. Rig up, operate and perform troubleshooting of the Managed Pressure Drilling Services equipment at the job site or workshop, ensure all paperwork and HSE requirements are met and complied with Perform green tagging, In Casing Test, or other operational activities required on location or in the shop and all documented procedures for the Managed Pressure Drilling Services equipment on location. Perform all RCD operations and monitoring. Performs field operations of Managed Pressure Drilling Services equipment including operating the MPD Choke from the Operator s Panel Troubleshoot all electrical/electronic components and repair/maintain chokes and other mechanical equipment as necessary. Completes all the necessary reports/paperwork related to Managed Pressure Drilling Services operations. Keeps updated on all inspection requirements for the Managed Pressure Drilling Services equipment on the job site and in the shop. Demonstrate and apply knowledge and understanding of all matters related to the Managed Pressure Drilling Services equipment and accessories. Provides onsite job support to include but not limited to: mechanical, hydraulic functionality, revision changes, compatibility issues, troubleshooting, system versions, of Managed Pressure Drilling Services components. Keep updated on Managed Pressure Drilling Services equipment, mechanical and hydraulic equipment manufacturing or regulatory standards. Know and understand Weatherford Quality Policy and comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Workplace Instructions Comply with Weatherford and client Quality, Health, Security and Environment (QHSE) procedures and documentation on site for specific shift. Document all jobs and incidents in the Weatherford Performance Tracking System (WPTS). Participate in the Permit to Work process. Actively participate in ToolBox talks. Must understand and comply with all safety rules and company policies of Weatherford Required to complete the competency and training requirements identified by Global and Regional Management. Complete training in order to meet the minimum HSE certification and technical requirements required perform their jobs Perform all duties regarding Managed Pressure Drilling Services and Weatherford assigned by management or supervisors within the physical demand of the job description.</p><p><strong>Skills</strong> Mechanical ability necessary to perform repairs Excellent Microsoft Outlook, Word and Excel computer skills Self-motivator, self-starter Good oral and written communication skills Must be able to follow instructions Able to work closely with fellow employees Customer focused. General understanding of products and their application. Individual must be adaptive to change, have multi-tasking ability. Ability to work in a team environment. Ability to work in high and cold temperature environment Should be able to work closely with all levels of personnel and outside contractors.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Qualifications:</strong> +5 years related to MPD field experience Bachelor's degree Strong MPD knowledge #LI-MD1</p>

<p>Job Overview Weatherford is seeking a skilled and results-driven Field Specialist III MPD to join our team. This pivotal role is responsible for optimizing MPD and drilling processes, enhancing efficiency, and driving profitability. The ideal candidate will work closely with country and regional team to ensure accurate reporting and compliance. Additionally, this role plays a key part in conducting Operations safely and with minimal interruption to drilling. The job requires occasional package preparation in the Weatherford base where full compliance to Weatherford performance standards is required.</p><p>Responsibilities:</p><p>Conducts maintenance of the Managed Pressure Drilling Services equipment at the job site and workshop when required.</p><p>Responsible for daily MPD reporting, hydraulic calculations, simulations and supervises shift personnel.</p><p>At the discretion of product line management (such as the Engineering Manager, Operations Manager, or their designee) will be responsible for working in the shop. This will include but not limited to green tagging, preparing, and/or assisting with shipping equipment to job site.</p><p>Rig up, operate and perform troubleshooting of the Managed Pressure Drilling Services equipment at the job site or workshop, ensure all paperwork and HSE requirements are met and complied with</p><p>Perform green tagging, In Casing Test, or other operational activities required on location or in the shop and all documented procedures for the Managed Pressure Drilling Services equipment on location.</p><p>Perform all RCD operations and monitoring.</p><p>Performs field operations of Managed Pressure Drilling Services equipment including operating the MPD Choke from the Operator s Panel</p><p>Troubleshoot all electrical/electronic components and repair/maintain chokes and other mechanical equipment as necessary.</p><p>Completes all the necessary reports/paperwork related to Managed Pressure Drilling Services operations.</p><p>Keeps updated on all inspection requirements for the Managed Pressure Drilling Services equipment on the job site and in the shop.</p><p>Demonstrate and apply knowledge and understanding of all matters related to the Managed Pressure Drilling Services equipment and accessories.</p><p>Provides onsite job support to include but not limited to: mechanical, hydraulic functionality, revision changes, compatibility issues, troubleshooting, system versions, of Managed Pressure Drilling Services components.</p><p>Keep updated on Managed Pressure Drilling Services equipment, mechanical and hydraulic equipment manufacturing or regulatory standards.</p><p>Know and understand Weatherford Quality Policy and comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Workplace Instructions</p><p>Comply with Weatherford and client Quality, Health, Security and Environment (QHSE) procedures and documentation on site for specific shift.</p><p>Document all jobs and incidents in the Weatherford Performance Tracking System (WPTS).</p><p>Participate in the Permit to Work process.</p><p>Actively participate in ToolBox talks.</p><p>Must understand and comply with all safety rules and company policies of Weatherford</p><p>Required to complete the competency and training requirements identified by Global and Regional Management.</p><p>Complete training in order to meet the minimum HSE certification and technical requirements required perform their jobs</p><p>Perform all duties regarding Managed Pressure Drilling Services and Weatherford assigned by management or supervisors within the physical demand of the job description.</p><p>Skills</p><p>Mechanical ability necessary to perform repairs</p><p>Excellent Microsoft Outlook, Word and Excel computer skills</p><p>Self-motivator, self-starter</p><p>Good oral and written communication skills</p><p>Must be able to follow instructions</p><p>Able to work closely with fellow employees</p><p>Customer focused.</p><p>General understanding of products and their application.</p><p>Individual must be adaptive to change, have multi-tasking ability.</p><p>Ability to work in a team environment.</p><p>Ability to work in high and cold temperature environment</p><p>Should be able to work closely with all levels of personnel and outside contractors.</p><p><strong>Desired Candidate Profile</strong></p><p>Qualifications: 3 - 5 years related to MPD field experience Bachelor's degree Strong MPD knowledge #LI-MD1</p>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance. Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements.USAF equivalent position is Munitions/Weapons Technician Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li><li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li><li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li><li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li><li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li><li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li><li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li><li>Maintain weapons certification and currency.</li><li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li><li>Perform all other duties as assigned or requested.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have High School diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required.</li><li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li><li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li><li>Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><br>POSITION SUMMARY<br>Ensure staff is working together as a team to ensure optimum service and that guest needs are met. Inspect grooming and attire of staff, and rectify any deficiencies. Complete opening and closing duties including setting up necessary supplies and tools, cleaning all equipment and areas, locking doors, etc. Inspect storage areas for organization, use of FIFO, and cleanliness. Complete scheduled inventories and stock and requisition necessary supplies. Monitor dining rooms for seating availability, service, safety, and well being of guests. Complete work orders for maintenance repairs.<br>Assist management in hiring, training, scheduling, evaluating, counseling, disciplining, and motivating and coaching employees; and serve as a role model and first point of contact of the Guarantee of Fair Treatment/Open Door Policy process. Follow all company and safety and security policies and procedures; report accidents, injuries, and unsafe work conditions to manager; and complete safety training and certifications. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Speak with others using clear and professional language. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Read and visually verify information in a variety of formats (e.g., small print). Visually inspect tools, equipment, or machines (e.g., to identify defects). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Grasp, turn, and manipulate objects of varying size and weight, requiring fine motor skills and hand-eye coordination. Move through narrow, confined, or elevated spaces. Move up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors.<br>PREFERRED QUALIFICATIONS<br>Education: High school diploma or G.E.D. equivalent.<br>Related Work Experience: At least 2 years of related work experience.<br>Supervisory Experience: At least 1 year of supervisory experience.<br>License or Certification: None<br>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.<br>At Courtyard, we’re passionate about better serving the needs of travelers everywhere. It’s what inspired us to create the first hotel designed specifically for business travelers, and it’s why the Courtyard experience today empowers our guests, no matter the purpose of their trip. We’re looking for achievers who are passionate about providing a guest experience that goes above and beyond, enjoy being part of a small yet ambitious team, and love learning how to always improve – all while having fun. <br>In joining Courtyard, you join a portfolio of brands with Marriott International. Be where you can do your best work,​ begin&nbsp;your purpose,&nbsp;belong&nbsp;to an amazing global​&nbsp;team, and&nbsp;become&nbsp;the best version of you.</span> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><br></p> <p> </p> <p> <b>What You Will Do :</b> </p> <p>The Dimensional Test Equipment (DTE) / Automatic Test Equipment (ATE) Engineer</p> <p>As the principal authority for the support and maintenance of the contractor supplied</p> <p>PATRIOT depot test stations, except for General Electric Test Set, the ATE engineer shall:</p> <p>1. assist with determining operating ability of all contractor test equipment</p> <p>2. verify that all test station manuals, test procedures, test software, fixtures, and Units</p> <p>Under Test (UUT) are the correct configuration</p> <p>3. assist in isolating problems between test station hardware, software, and UUT</p> <p>4. assist and resolve test station software problems at system and UUT level</p> <p>5. provide direct interface with contractor test personnel when additional testing</p> <p>experience is required</p> <p>6. coordinate training with KAD Depot trained technicians</p> <p>7. schedule both informal classroom and practical exercise training activities that refresh previous depot training lessons</p> <p> </p> <p>The DTE/ATE support personnel provide the technical operating knowledge, electrically and mechanically, as well as extensive practical experience to effectively operate, maintain and provide self-sufficiency training to the in-country support personnel. The DTE specialist will provide hands-on maintenance support and operational training on the repair of the Radar transmitter Battery Replaceable Units (BRU s). Systems are computer driven and training will consist of both electronic and mechanical repair for the units under test. Working under a Patriot Test Station Lead, this position will require hands-on operation, maintenance and sustainment of the PAT 243 and PAT 247 Patriot test stations in support of Patriot Configuration 3+ systems. This will include operating troubleshooting and sustaining the coolant oil processing unit and Radar coolant group to ensure oil flow and glycol resistivity requirements are met for system unit operation. This will also include sustaining and troubleshooting converters, inverters and electric circuit s assembly for the transmission system, by tracking signals and measuring voltage, current and resistance measurements to isolate problems to the component level on the Pat 247 test station. Functionally verifies the operational condition of the PAT 243, 244 and PAT 247 test stations to verify operational status. Demonstrates proper maintenance, sustainment, repair procedures and techniques. Participates in on-the job training programs. Prepares, fills out and submits maintenance reports, system problem reports (SPR s) and performs other duties as directed.</p> <p> </p> <p> <b>This position is located in Kuwait.</b> </p> <p> </p> <p> </p> <p> <b> Qualifications You Must Have :</b> </p> <p>Must have four (4) years of demonstrated knowledge and experience in the operation, maintenance and sustainment of Dimensional Test Equipment (DTE) Station equipment and for testing, troubleshooting and repairing Patriot electronics Assemblies and Subassemblies to the component level, or equivalent test stations. Experienced in reading and understanding engineering drawings, schematics, books, technical documents and PC software. Demonstrated skills in using general tools and general use commercial test equipment, also in replacing component parts on circuit card assemblies. Must be able to work in extreme desert environments and lift 50 pounds. Must have a good understanding of standard industrial test equipment such as digital volt meters, high voltage probes, power meters, spectrum analyzers, frequency counters and oscilloscopes. A Secret Security Clearance is required.</p> <p> </p> <p> <b>Qualifications We Prefer:</b> </p> <p>A minimum of 6 to 8 years hands on knowledge and experience operating, maintaining and sustaining PAT 243, and PAT 244 test stations or equivalent test stations. Demonstrated experience working on Configuration 3 system assemblies and subassemblies. Experience working in and with a Middle East customer directly. Knowledge and experience in maintaining and sustaining DTE test station equipment.</p> <p> </p> <p> <b>Required Education:</b> </p> <p> </p> <p>Bachelor's degree in related field and 8-12 years of related experience. </p> <p> </p> <p><br></p></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Kuwait in support of WEXMAC*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. This position is for the Management Operations Center Manage (MOC) supporting WEXMAC in Kuwait. The MOC Manager support role is expected to oversee and coordinate the operational aspects of ongoing projects across the entire program and serves as a liaison between program management, directorates, and site management teams. This role is responsible for the schedule and technical performance of the WEXMAC KU program. As MOC Manager, you will lead an operations team to capture and analyze workload, lessen costs, enhance quality, improve performance and reliability, and increase the overall competitiveness of our service delivery line. This position serves as a key client contact on status and performance as well as anticipating and fulfilling client needs to ensure contract compliance and mission assurance. The MOC Manager assesses project issues and in coordination with the respective directorates develops mechanisms for monitoring project progress. This role involves problem-solving and requires interaction with multiple directorates, including Public Works, Information Management, Installation Logistics, Emergency Services, Community Services, Supply Chain, Business Advisories, and Program Managers. Specific tasks include ensuring contract compliance IAW the Technical Data Package (TDP), monitoring contract workload, CDRL submittals, developing and managing METs, and analyzing directorate submittals. The position will be expected to interact daily with directorate resources to ensure all program requirements are met and ensure that all supported contracts meet their delivery schedule, cost, and performance requirements. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Develop detailed work plans, schedules, resource plans, and status reports and oversee the development and delivery of all program and contract deliverables, ensuring adherence to timelines, contract requirements, and quality standards. + Prepares, develops, and coordinates the Mile Execution Tracker (MET) to meet all program and contract objectives. Ensures program schedules are horizontally and vertically integrated. + Work closely with the Site Managers and Directors in the planning and execution of tasks and projects to ensure requirements are met, communication is open and transparent, and any issues are resolved in a timely manner. + Perform risk and opportunity management (RSKOM) functions for the contract scope in concert with the overall program objectives. + Generation of reports, logs and metrics as determined by the Program Management Team . This includes daily/weekly/monthly reports, monthly performance metrics, and other reports as requested. + Conducts project status and review meetings with key program stakeholders and is responsible for project tracking and analysis. + Interface with the WEXMAC Professionals or US Government customers as needed. + Provide programmatic, technical, and analytical guidance to the program team. Recommend and take action to direct the analysis and solutioning of problems. + Other assigned duties as assigned by the Manager. Qualifications Minimum Qualifications: Education/Certifications: One-year related experience may be substituted for one year of education, if degree is required. + + Must be CAC eligible and/or able to obtain a Common Access Card (CAC) + Must be a U.S. Citizen + A valid driver’s license and the ability to obtain a U. S. Government Motor Vehicle Operator’s License and host nation Driver’s License, is required. Education: + + BS/BA Degree or equivalent Experience: Experience: + + Minimum of 5 years experience in Base Operations and Support Service contracts. Skills: + + Ability to generate reports, logs and metrics as determined by the Program Management Team. This includes daily/weekly/monthly reports, monthly performance metrics, and other reports as requested + Ability to provide performance objectives, periodic performance evaluations, performance improvement plans, on-the-job training, mentorship and leadership to personnel assigned as your direct reports. + Ability to develop draft communications, as needed, for TO management relating to corporate services bulletins, updates, upcoming trainings, and reporting changes. + Extremely proficient with project management systems (Microsoft Project, Excel, PowerPoint, and Word). Working Conditions: + + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, duty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. Physical Requirements: + + Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2>Overview</h2>***This position is physically located in Kuwait in support of WEXMAC*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The purpose of this job is to perform specialized duty work functions in preparing for and responding to fire/medical emergency calls and in providing basic EMT level treatment to patients requiring emergency medical care and safely transporting them to the hospital or medical clinic. Duties and responsibilities include maintaining readiness for emergency call response; responding to fire, medical, and related emergency calls when dispatched and taking proper action; educating staff and public on fire safety/prevention; and performing Fire Department activities. Additionally, this position may involve staffing the Fire Alarm Communications Center (FACC ) and receiving calls for emergency assistance, monitoring fire alarm systems and emergency reporting phones. and dispatching appropriate apparatus and personnel to emergencies. Performs other duties as assigned.<h2>Responsibilities</h2>This position description is subject to change at any time as needed to meet the requirements of the program or company. Responds to emergency calls, provides Basic life support in accordance with EMS protocols, and assists other members of the department. Provide efficient and immediate care to the critically ill and injured and transports the patient to the designated ambulance transfer Provide pre hospital emergency medical care of simple and multiple system Assist the Paramedic in determining the nature and extent of illness or injury and establishing priorities for required emergency Maintains vehicles and equipment in a serviceable and ready condition. Participates in continuing medical education (CME) and training activities, both as an instructor and as a student, depending on the nature and purpose of the course. Communicates effectively in writing, verbally and over the radio or telephone. Performs various other tasks as assigned by the Fire Chief or designee. Complies with all applicable rules, regulations/standard operating procedures, as directed By the Fire Chief, Program Manager and Base Commander. Performs other duties and assignments as needed.<h2>Qualifications</h2>Minimum Qualifications Education/Certifications : Two years related experience may be substituted for one year of education, if degree is required. High school diploma or equivalent is required. An associate s degree is preferred. Must be CAC eligible and/or able to obtain a Common Access Card (CAC) Must be a U.S. Citizen Required to have IFSAC or Pro-Board Certification to these levels: National Registry of Emergency Medical Technicians (NREMT) or State EMT Healthcare Provider CPR/BLS/AED Firefighter I Firefighter II Hazardous Materials Operations Airport Firefighter Driver/Operator Pumper Driver/Operator Aircraft Rescue and Firefighting Driver/Operator Mobile Water Supply Telecommunicator I/II Must read, write, and speak English fluently. Able to obtain on host nation drivers license Experience : Must have a minimum of two years of experience working on an emergency response ambulance. Must be in good standing with their certifying organization, and they must maintain these certifications for the duration of their employment. Must have a minimum of 2 years experience in emergency health care setting. Skills: Excellent communicative skills, both written &amp; verbal. Extensive Fire Fighting and Emergency Service Experience. (5 Years) Possess knowledge of safety and environmental issues. Be familiar with various Computerized Maintenance Management Systems (CMMS).<h2>Working Conditions</h2>: Must be capable of working in various weather conditions (i.e. humidity, rain/wet season, warm/hot, sunny). The worker is subject to atmospheric conditions. One or more of the following conditions that affect the respiratory system of the skin: fumes, odors, dust, mists, gases, or poor ventilation.<h2>Physical Requirements</h2>: Firefighter/EMT must have the ability to lift and carry a minimum of 45 lbs. and be able to collectively lift, carry, and balance patients who weigh in excess of 100 lbs. In addition, the Paramedic must have the ability to pull and reach with both hands; crawl, kneel, bend and climb; work outdoors in excessive heat or cold, high humidity or dry atmospheric conditions. Firefighter/EMT will be exposed to lifting, pulling and numerous strenuous activities that paramedics face during medical response calls. Furthermore, the climate in which strenuous work activities will be required is extremely hot/humid or cold during certain parts of the year/time of day.<p><strong>Desired Candidate Profile</strong></p><h2>Qualifications</h2>Minimum Qualifications Education/Certifications : Two years related experience may be substituted for one year of education, if degree is required. High school diploma or equivalent is required. An associate s degree is preferred. Must be CAC eligible and/or able to obtain a Common Access Card (CAC) Must be a U.S. Citizen Required to have IFSAC or Pro-Board Certification to these levels: National Registry of Emergency Medical Technicians (NREMT) or State EMT Healthcare Provider CPR/BLS/AED Firefighter I Firefighter II Hazardous Materials Operations Airport Firefighter Driver/Operator Pumper Driver/Operator Aircraft Rescue and Firefighting Driver/Operator Mobile Water Supply Telecommunicator I/II Must read, write, and speak English fluently. Able to obtain on host nation drivers license Experience : Must have a minimum of two years of experience working on an emergency response ambulance. Must be in good standing with their certifying organization, and they must maintain these certifications for the duration of their employment. Must have a minimum of 2 years experience in emergency health care setting. Skills: Excellent communicative skills, both written &amp; verbal. Extensive Fire Fighting and Emergency Service Experience. (5 Years) Possess knowledge of safety and environmental issues. Be familiar with various Computerized Maintenance Management Systems (CMMS).

<p>The Office Manager leads day-to-day office administration, management support, meeting coordination, facilities services, suppliers, records, correspondence, office purchasing and administrative controls. The role ensures that leaders and teams receive timely, professional support while company information, commitments, costs and workplace standards remain well controlled</p><p><strong>POSITION PURPOSE</strong></p><p>The Office Manager leads day-to-day office administration, management support, meeting coordination, facilities services, suppliers, records, correspondence, office purchasing and administrative controls. The role ensures that leaders and teams receive timely, professional support while company information, commitments, costs and workplace standards remain well controlled</p><p><strong>SUCCESS PROFILE</strong></p><p>A discreet, service-minded and highly organized administrator who anticipates needs, keeps executives and teams aligned, protects confidential information, controls vendors and office costs, and closes administrative actions reliably.</p><p><strong>KEY ACCOUNTABILITIES</strong></p><ol><li><strong>Executive and Management Support</strong><br>Manage calendars, appointments, meeting schedules and priorities for the General Manager or Owner as assigned. Prepare agendas, briefing materials, presentations, correspondence and management documents to a high standard. Record accurate meeting minutes, maintain action logs, follow up owners and escalate overdue commitments. Coordinate business travel, visitor arrangements and confidential matters with discretion and sound judgement.</li><li><strong>Daily Office Operations</strong><br>Maintain an orderly, professional and service-oriented office environment, reception flow and shared administrative calendar. Coordinate incoming calls, mail, couriers, visitors, deliveries, meeting rooms, refreshments and routine office requests. Establish clear office procedures, service standards, checklists and escalation routes for recurring activities. Monitor administrative workload and ensure requests are completed accurately and within agreed timelines.</li><li><strong>Facilities and Workplace Services</strong><br>Coordinate assigned office facilities, utilities, maintenance, cleaning, pest control, security access and workplace services. Maintain service schedules, asset and key registers, maintenance logs and workplace inspection records. Raise and track faults, arrange approved repairs, verify completion and escalate safety or business-continuity risks. Support workspace planning, office moves and ergonomic, housekeeping and employee-welfare requirements.</li><li><strong>Suppliers, Purchasing and Contracts</strong><br>Source office supplies and administrative services through approved quotations, purchase requests and authorization controls. Maintain supplier records, contracts, insurance documents, renewal dates, service-level expectations and performance reviews. Verify delivery, quality and invoice accuracy before routing documentation for Finance approval and payment. Challenge recurring costs, consolidate demand and identify practical savings without reducing service quality.</li><li><strong>Records, Correspondence and Document Control</strong><br>Maintain secure physical and electronic filing systems with clear naming, access, retention and retrieval standards. Control official correspondence, management approvals, contracts, certificates, policies and administrative registers. Track expiries and renewals for assigned licences, subscriptions, agreements and company documents. Protect confidential employee, commercial, legal and management information from unauthorized access or disclosure</li><li><strong>Internal Communication and Coordination</strong><br>Act as a reliable coordination point between management, departments, stores, warehouse teams and external parties. Draft and distribute approved notices, circulars, schedules and instructions in clear Arabic and English. Maintain action trackers for cross-functional commitments and provide concise status updates to management. Handle enquiries professionally and direct sensitive or specialized matters to the appropriate owner promptly.</li><li><strong>Administrative Budget and Financial Controls</strong><br>Prepare and monitor the office and administration budget, routine commitments, purchase requests and monthly forecasts. Administer approved petty cash or expense claims with complete receipts, reconciliation and segregation of duties. Track recurring expenses, supplier invoices, deposits, subscriptions and administrative accruals with Finance. Report cost variances, unusual spending, control gaps and savings opportunities accurately and on time.</li><li><strong>Administrative Team and HR Support</strong><br>Supervise reception, office support, drivers, messengers or other assigned administrative staff and service providers. Set priorities, schedules, service standards and performance expectations; coach staff and address recurring gaps. Support HR with onboarding logistics, access cards, workstations, attendance documents and employee events as requested. Coordinate staff transport, uniforms, welfare items or accommodation administration only were assigned by management.</li><li><strong>Events, Visits and Business Logistics</strong><br>Coordinate management meetings, interviews, audits, supplier visits, internal events and company functions. Prepare venues, materials, attendance lists, access, catering, transport and other logistical requirements. Support VIP and official visits with appropriate protocol, confidentiality and professional hospitality. Close each event or visit with documented expenses, outstanding actions and supplier-performance feedback.</li><li><strong>Compliance, Risk and Business Continuity</strong><br>Follow company policies, Kuwait requirements and approved authority limits for purchases, records and administration. Coordinate administrative documents with the company's authorized government-relations representative when required. Maintain emergency contacts, call trees, key documents and office-continuity arrangements in coordination with management. Report confidentiality breaches, safety concerns, vendor failures, expired documents and other material risks promptly.</li></ol><p><strong>Desired Candidate Profile</strong></p><p><strong>REQUIREMENTS</strong></p><p><strong>Education</strong><br>Bachelor's degree or diploma in Business Administration, Office Management, Management, Secretarial Studies or a related discipline.</p><p><strong>Experience</strong><br>Minimum 5-7 years of progressive office administration or executive-support experience, including at least 2 years coordinating staff or suppliers.</p><p><strong>Kuwait exposure</strong><br>Practical experience working in Kuwait and familiarity with local business practices, service providers and documentation are strongly preferred.</p><p><strong>Sector background</strong><br>Retail, trading, distribution, FMCG, hospitality or another fast-paced multi-department environment is preferred.</p><p><strong>Executive support</strong><br>Demonstrated capability in calendars, meetings, minutes, correspondence, travel, presentations and confidential management support.</p><p><strong>Administration</strong><br>Strong experience with facilities services, suppliers, purchasing, records, contracts, office budgets and service follow-up.</p><p><strong>Systems and tools</strong><br>Advanced Microsoft Office capability, particularly Outlook, Word, Excel and PowerPoint; familiarity with ERP, document-management or workflow tools is preferred.</p><p><strong>Languages</strong><br>Full professional proficiency in Arabic and English, with strong written communication and document-review capability.</p><p><strong>Mobility</strong><br>ability to attend suppliers, offices and company locations are preferred.</p><p><strong>REQUIRED COMPETENCIES</strong></p><p><strong>Organization</strong><br>Plans ahead, manages competing priorities and keeps calendars, records, actions and deadlines under control.</p><p><strong>Discretion</strong><br>Handles confidential management, employee and commercial information with maturity and integrity.</p><p><strong>Service orientation</strong><br>Responds professionally, anticipates practical needs and follows requests through to satisfactory closure.</p><p><strong>Communication</strong><br>Writes clearly in Arabic and English and adapts tone appropriately for executives, staff, visitors and suppliers.</p><p><strong>Attention to detail</strong><br>Produces accurate documents, minutes, invoices, schedules, registers and reconciliations.</p><p><strong>Problem solving</strong><br>Resolves routine issues independently, makes sensible trade-offs and escalates material risks early.</p><p><strong>Cost consciousness</strong><br>Protects company resources, challenges waste and balances service quality with value for money</p>