Oil

<p>Carry out general activities related to lifting, rigging &amp; slinging of all loads lifted and moved by cranes and other lifting equipment, housekeeping, chipping, painting and repair of equipment in a proper &amp; timely manner to ensure a safe &amp; efficient operation.</p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>General duties:</strong> Performs general duties in such a manner which results in achieving the operating plan and objectives set forth by the Driller and STP that includes Safety, operating expectation and rig appearance and housekeeping. Assists other rig departments such as the drilling crew on rig floor, welder, Maintenance Team, etc.</p><p><strong>Lifting Operations:</strong> Hook on loads for the crane and forklift operators and act as a banksman when required. Assist crane and forklift operators in off-loading and loading all drilling materials and supplies as required. Comply and apply safe rigging &amp; slinging practices, from pre-lift requirements, wire inspections, correct use of taglines, proper use of hands-free tools and body placements, and the use of verbal and hand signaling methods.</p><p><strong>Rig Move:</strong> Carry out relevant duties and activities to prepare for rig moves as directed by the Driller.</p><p><strong>Drilling / Work-over Operations:</strong> Assists in operations for preparing drilling mud activities including mixing chemicals at the mixing hopper, cleaning out mud pits, etc. Assist in completing the cleaning, preparation and handling of tubulars and drilling tools. Supply the drill floor with tubulars, drilling tools and equipment as required. Liaise and co-operate with the Driller and Assistant Driller to ensure the safe and smooth running of operations.</p><p><strong>Materials &amp; Equipment:</strong> Ensures that lifting material and equipment are properly maintained, stored, inspected, and returned to its proper storage location in a condition where its ready to be used as per directed. Ensure thread protectors are properly installed on drill pipes, drill collars &amp; crossovers that are being hoisted or stored.</p><p><strong>Housekeeping:</strong> Ensures that the work area is clean and organized, free of hazards prior to &amp; upon completing the work tasks, or repairs. Ensure that housekeeping standards in all areas are in accordance with Company requirements. Disposes of debris as per the company hazardous material segregations policy/waste management policy taking into consideration the environmental &amp; safety aspects. Prepare surfaces for painting and apply paint as directed. Secure the current work area or operation before evacuating during emergency situations or drill.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Education &amp; Experience:</strong> High School or Technical Degree Preferably 1 year of working experience preferably in similar Oil and Gas industries. Minimum age 20 years up to 27 years old.</p><p><strong>Skills/Competencies Required:</strong> Elementary level of English language. Basic Mathematical skills adding, subtracting, dividing, multiplying . Situation Awareness / self-motivation, Teamwork, Time management / Managing work.</p><p><strong>Physical Requirements:</strong> Frequent climbing (stairs, ladders). Frequent lifting, pulling &amp; pushing as per Company procedure. Ability to work under different extreme weather conditions such as: Heat, Noise, Humidity &amp; Cold. Ability to work in day/night shifts.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p>

<p>Carry out general activities related to lifting, rigging &amp; slinging of all loads lifted and moved by cranes and other lifting equipment, housekeeping, chipping, painting and repair of equipment in a proper &amp; timely manner to ensure a safe &amp; efficient operation.</p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>General duties:</strong> Performs general duties in such a manner which results in achieving the operating plan and objectives set forth by the Driller and STP that includes Safety, operating expectation and rig appearance and housekeeping. Assists other rig departments such as the drilling crew on rig floor, welder, Maintenance Team, etc.</p><p><strong>Lifting Operations:</strong> Hook on loads for the crane and forklift operators and act as a banksman when required. Assist crane and forklift operators in off-loading and loading all drilling materials and supplies as required. Comply and apply safe rigging &amp; slinging practices, from pre-lift requirements, wire inspections, correct use of taglines, proper use of hands-free tools and body placements, and the use of verbal and hand signaling methods.</p><p><strong>Rig Move:</strong> Carry out relevant duties and activities to prepare for rig moves as directed by the Driller.</p><p><strong>Drilling / Work-over Operations:</strong> Assists in operations for preparing drilling mud activities including mixing chemicals at the mixing hopper, cleaning out mud pits, etc. Assist in completing the cleaning, preparation and handling of tubulars and drilling tools. Supply the drill floor with tubulars, drilling tools and equipment as required. Liaise and co-operate with the Driller and Assistant Driller to ensure the safe and smooth running of operations.</p><p><strong>Materials &amp; Equipment:</strong> Ensures that lifting material and equipment are properly maintained, stored, inspected, and returned to its proper storage location in a condition where its ready to be used as per directed. Ensure thread protectors are properly installed on drill pipes, drill collars &amp; crossovers that are being hoisted or stored.</p><p><strong>Housekeeping:</strong> Ensures that the work area is clean and organized, free of hazards prior to &amp; upon completing the work tasks, or repairs. Ensure that housekeeping standards in all areas are in accordance with Company requirements. Disposes of debris as per the company hazardous material segregations policy/waste management policy taking into consideration the environmental &amp; safety aspects. Prepare surfaces for painting and apply paint as directed. Secure the current work area or operation before evacuating during emergency situations or drill.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Job Requirements:</strong></p><p><strong>Education &amp; Experience:</strong> High School or Technical Degree Preferably 1 year of working experience preferably in similar Oil and Gas industries. Minimum age 20 years up to 27 years old.</p><p><strong>Skills/Competencies Required:</strong> Elementary level of English language. Basic Mathematical skills adding, subtracting, dividing, multiplying . Situation Awareness / self-motivation, Teamwork, Time management / Managing work.</p><p><strong>Physical Requirements:</strong> Frequent climbing (stairs, ladders). Frequent lifting, pulling &amp; pushing as per Company procedure. Ability to work under different extreme weather conditions such as: Heat, Noise, Humidity &amp; Cold. Ability to work in day/night shifts.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p>

<p><strong>Job Summary:</strong> Carry out general activities related to lifting, rigging &amp; slinging of all loads lifted and moved by cranes and other lifting equipment, housekeeping, chipping, painting and repair of equipment in a proper &amp; timely manner to ensure a safe &amp; efficient operation.</p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>General duties:</strong> Performs general duties in such a manner which results in achieving the operating plan and objectives set forth by the Driller and STP that includes Safety, operating expectation and rig appearance and housekeeping. Assists other rig departments such as the drilling crew on rig floor, welder, Maintenance Team, etc.</p><p><strong>Lifting Operations:</strong> Hook on loads for the crane and forklift operators and act as a banksman when required. Assist crane and forklift operators in off-loading and loading all drilling materials and supplies as required. Comply and apply safe rigging &amp; slinging practices, from pre-lift requirements, wire inspections, correct use of taglines, proper use of hands-free tools and body placements, and the use of verbal and hand signaling methods.</p><p><strong>Rig Move:</strong> Carry out relevant duties and activities to prepare for rig moves as directed by the Driller.</p><p><strong>Drilling / Work-over Operations:</strong> Assists in operations for preparing drilling mud activities including mixing chemicals at the mixing hopper, cleaning out mud pits, etc. Assist in completing the cleaning, preparation and handling of tubulars and drilling tools. Supply the drill floor with tubulars, drilling tools and equipment as required. Liaise and co-operate with the Driller and Assistant Driller to ensure the safe and smooth running of operations.</p><p><strong>Materials &amp; Equipment:</strong> Ensures that lifting material and equipment are properly maintained, stored, inspected, and returned to its proper storage location in a condition where its ready to be used as per directed. Ensure thread protectors are properly installed on drill pipes, drill collars &amp; crossovers that are being hoisted or stored.</p><p><strong>Housekeeping:</strong> Ensures that the work area is clean and organized, free of hazards prior to &amp; upon completing the work tasks, or repairs. Ensure that housekeeping standards in all areas are in accordance with Company requirements. Disposes of debris as per the company hazardous material segregations policy/waste management policy taking into consideration the environmental &amp; safety aspects. Prepare surfaces for painting and apply paint as directed. Secure the current work area or operation before evacuating during emergency situations or drill.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Job Requirements:</strong></p><p><strong>Education &amp; Experience:</strong> High School or Technical Degree Preferably 1 year of working experience preferably in similar Oil and Gas industries. Minimum age 20 years up to 27 years old.</p><p><strong>Skills/Competencies Required:</strong> Elementary level of English language. Basic Mathematical skills adding, subtracting, dividing, multiplying . Situation Awareness / self-motivation, Teamwork, Time management / Managing work.</p><p><strong>Physical Requirements:</strong> Frequent climbing (stairs, ladders). Frequent lifting, pulling &amp; pushing as per Company procedure. Ability to work under different extreme weather conditions such as: Heat, Noise, Humidity &amp; Cold. Ability to work in day/night shifts.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> <strong> <u>Job Summary:</u> </strong> </p> <p>Carry out general activities related to lifting, rigging &amp; slinging of all loads lifted and moved by cranes and other lifting equipment, housekeeping, chipping, painting and repair of equipment in a proper &amp; timely manner to ensure a safe &amp; efficient operation.</p> <p> <strong> <u>Roles &amp; Responsibilities:</u> </strong> </p> <p> <strong>General duties:</strong> </p> <ul> <li>Performs general duties in such a manner which results in achieving the operating plan and objectives set forth by the Driller and STP that includes Safety, operating expectation and rig appearance and housekeeping.</li> <li>Assists other rig departments such as the drilling crew on rig floor, welder, Maintenance Team, etc.</li> </ul> <p> <strong>Lifting Operations:</strong> </p> <ul> <li>Hook on loads for the crane and forklift operators and act as a banksman when required. </li> <li>Assist crane and forklift operators in off-loading and loading all drilling materials and supplies as required. </li> <li>Comply and apply safe rigging &amp; slinging practices, from pre-lift requirements, wire inspections, correct use of taglines, proper use of hands-free tools and body placements, and the use of verbal and hand signaling methods.</li> </ul> <p> <strong>Rig Move:</strong> </p> <ul> <li>Carry out relevant duties and activities to prepare for rig moves as directed by the Driller.</li> </ul> <p> <strong>Drilling / Work-over Operations:</strong> </p> <ul> <li>Assists in operations for preparing drilling mud activities including mixing chemicals at the mixing hopper, cleaning out mud pits, etc.</li> <li>Assist in completing the cleaning, preparation and handling of tubulars and drilling tools. Supply the drill floor with tubulars, drilling tools and equipment as required.</li> <li>Liaise and co-operate with the Driller and Assistant Driller to ensure the safe and smooth running of operations.</li> </ul> <p> <strong>Materials &amp; Equipment:</strong> </p> <ul> <li>Ensures that lifting material and equipment are properly maintained, stored, inspected, and returned to its proper storage location in a condition where its ready to be used as per directed.</li> <li>Ensure thread protectors are properly installed on drill pipes, drill collars &amp; crossovers that are being hoisted or stored.</li> </ul> <p> <strong>Housekeeping:</strong> </p> <ul> <li>Ensures that the work area is clean and organized, free of hazards prior to &amp; upon completing the work tasks, or repairs.</li> <li>Ensure that housekeeping standards in all areas are in accordance with Company requirements.</li> <li>Disposes of debris as per the company hazardous material segregations policy/waste management policy taking into consideration the environmental &amp; safety aspects.</li> <li>Prepare surfaces for painting and apply paint as directed. </li> <li>Secure the current work area or operation before evacuating during emergency situations or drill.</li> </ul> <p> <strong> <u>Job Requirements:</u> </strong> </p> <p> <strong>Education &amp; Experience:</strong> </p> <ul> <li>High School or Technical Degree</li> <li>Preferably 1 year of working experience preferably in similar Oil and Gas industries.</li> <li>Minimum age 20 years up to 27 years old.</li> </ul> <p> <strong>Skills/Competencies Required:</strong> </p> <ul> <li>Elementary level of English language.</li> <li>Basic Mathematical skills adding, subtracting, dividing, multiplying .</li> <li>Situation Awareness / self-motivation, Teamwork, Time management / Managing work.</li> </ul> <p> <strong>Physical Requirements:</strong> </p> <ul> <li>Frequent climbing (stairs, ladders).</li> <li>Frequent lifting, pulling &amp; pushing as per Company procedure.</li> <li>Ability to work under different extreme weather conditions such as: Heat, Noise, Humidity &amp; Cold.</li> <li>Ability to work in day/night shifts.</li> </ul> <p> <strong>Certifications:</strong> </p> <ul> <li>As per ADES Training Matrix.</li> </ul></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> <strong> <u>Job Summary:</u> </strong> </p> <p>Carry out general activities related to lifting, rigging &amp; slinging of all loads lifted and moved by cranes and other lifting equipment, housekeeping, chipping, painting and repair of equipment in a proper &amp; timely manner to ensure a safe &amp; efficient operation.</p> <p> <strong> <u>Roles &amp; Responsibilities:</u> </strong> </p> <p> <strong>General duties:</strong> </p> <ul> <li>Performs general duties in such a manner which results in achieving the operating plan and objectives set forth by the Driller and STP that includes Safety, operating expectation and rig appearance and housekeeping.</li> <li>Assists other rig departments such as the drilling crew on rig floor, welder, Maintenance Team, etc.</li> </ul> <p> <strong>Lifting Operations:</strong> </p> <ul> <li>Hook on loads for the crane and forklift operators and act as a banksman when required. </li> <li>Assist crane and forklift operators in off-loading and loading all drilling materials and supplies as required. </li> <li>Comply and apply safe rigging &amp; slinging practices, from pre-lift requirements, wire inspections, correct use of taglines, proper use of hands-free tools and body placements, and the use of verbal and hand signaling methods.</li> </ul> <p> <strong>Rig Move:</strong> </p> <ul> <li>Carry out relevant duties and activities to prepare for rig moves as directed by the Driller.</li> </ul> <p> <strong>Drilling / Work-over Operations:</strong> </p> <ul> <li>Assists in operations for preparing drilling mud activities including mixing chemicals at the mixing hopper, cleaning out mud pits, etc.</li> <li>Assist in completing the cleaning, preparation and handling of tubulars and drilling tools. Supply the drill floor with tubulars, drilling tools and equipment as required.</li> <li>Liaise and co-operate with the Driller and Assistant Driller to ensure the safe and smooth running of operations.</li> </ul> <p> <strong>Materials &amp; Equipment:</strong> </p> <ul> <li>Ensures that lifting material and equipment are properly maintained, stored, inspected, and returned to its proper storage location in a condition where its ready to be used as per directed.</li> <li>Ensure thread protectors are properly installed on drill pipes, drill collars &amp; crossovers that are being hoisted or stored.</li> </ul> <p> <strong>Housekeeping:</strong> </p> <ul> <li>Ensures that the work area is clean and organized, free of hazards prior to &amp; upon completing the work tasks, or repairs.</li> <li>Ensure that housekeeping standards in all areas are in accordance with Company requirements.</li> <li>Disposes of debris as per the company hazardous material segregations policy/waste management policy taking into consideration the environmental &amp; safety aspects.</li> <li>Prepare surfaces for painting and apply paint as directed. </li> <li>Secure the current work area or operation before evacuating during emergency situations or drill.</li> </ul> <p> <strong> <u>Job Requirements:</u> </strong> </p> <p> <strong>Education &amp; Experience:</strong> </p> <ul> <li>High School or Technical Degree</li> <li>Preferably 1 year of working experience preferably in similar Oil and Gas industries.</li> <li>Minimum age 20 years up to 27 years old.</li> </ul> <p> <strong>Skills/Competencies Required:</strong> </p> <ul> <li>Elementary level of English language.</li> <li>Basic Mathematical skills adding, subtracting, dividing, multiplying .</li> <li>Situation Awareness / self-motivation, Teamwork, Time management / Managing work.</li> </ul> <p> <strong>Physical Requirements:</strong> </p> <ul> <li>Frequent climbing (stairs, ladders).</li> <li>Frequent lifting, pulling &amp; pushing as per Company procedure.</li> <li>Ability to work under different extreme weather conditions such as: Heat, Noise, Humidity &amp; Cold.</li> <li>Ability to work in day/night shifts.</li> </ul> <p> <strong>Certifications:</strong> </p> <ul> <li>As per ADES Training Matrix.</li> </ul></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Perform maintenance and repair of major assemblies and subassemblies of the T700/701C/D, T55-714 and auxiliary power units.</b></p> <ul> <li><p>Inspect engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks.</p></li> <li><p>Perform blade blending and blade replacement in cold section of powerplants.</p></li> <li><p>Replace or repair worn or damaged components, such as generators, alternators, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves.</p></li> <li><p>Ability to Perform hot section inspections and determine replacement of hot section components (GG rotors, stators, fuel injectors, igniters, power turbine.)</p></li> <li><p>Disassemble and inspect parts for wear, cracks, security, or other defects.</p></li> <li><p>Perform engine removal, replacement, reinstallation, and quick-change assembly (QCA) maintenance tasks.</p></li> </ul> <p><b>Knowledge &amp; Skills</b></p> <ul> <li><p>General knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</p></li> <li><p>Thorough knowledge of aircraft electrical and avionics component and system troubleshooting, repair procedures and replacement of parts.</p></li> <li><p>Thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers.</p></li> <li><p>Working knowledge of technical publications and Logistics Information Systems.</p></li> <li><p>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</p></li> <li><p>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</p></li> <li><p>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p></li> </ul> <p><b>Physical Requirements/Working Environment</b></p> <ul> <li><p>May work in aircraft maintenance hangar or outside.</p></li> <li><p>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</p></li> <li><p>May be exposed to extreme noise from turbine and jet engine aircraft.</p></li> <li><p>May be exposed to fumes or airborne particles; may be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft.</p></li> <li><p>Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day.</p></li> <li><p>Must be able to climb stairs, ramps, ladders, and work stands.</p></li> <li><p>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</p></li> <li><p>May be required to lift up to 50 pounds.</p></li> <li><p>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</p></li> <li><p>Must be able to see imperfections, micrometer readings and other small scales.</p></li> <li><p>Must be able to communicate by voice and detect sound by ear.</p></li> <li><p>Must be able to distinguish color and judge three-dimensional depth.</p></li> <li><p>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, APU, etc.</p></li> </ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><b>The Aircraft Mechanic II -</b> <b>Powerplant/Engine Back Shop Mechanic (T700/701C/D, T55-714)</b> <b>with experience in all three MDS UH60, CH47 &amp; AH64</b> performs and inspects aviation unit (<b>AVUM</b>), intermediate (<b>AVIM</b>) and <b>depot maintenance</b> on assigned aircraft systems.</p> <p><b>Minimum Requirements</b></p> <ul> <li>High School Graduate or equivalent is required. </li> <li>Five (5) years of recent applicable aircraft maintenance experience is required.</li> <li><b>With A&amp;P</b> Two (2) years aviation maintenance experience, and Two (2) years' experience on MDS <b>UH60, CH47, &amp; AH64</b>is required.</li> <li><b>Without A&amp;P,</b> must have Three (3) years aviation maintenance experience, Three (3) years rotary wing aircraft experience and Two (2) years on the assigned Mission Design Series UH-60, AH-64, CH-47 (MDS) to qualify.</li> <li>All experience must be within the Five (5) most recent years.</li> <li>Must be in possession of a <b>Valid U.S. Passport</b> for travel internationally. Passport must contain a minimum of 6 Blank pages and 2 years remaining before expiration date.</li> <li>Ability to obtain/maintain a US Government Security Clearance (NAC-I T1) Public Trust. <b>US Citizenship is Required</b> to obtain a Security Clearance, and for facility access to this site.</li> <li>Able to clear CENTCOM MOD Physicals requirement for deployment. (Attend CRC).</li> <li>Must be able to obtain Kuwait Visa.</li> </ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for the right people - people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world's largest providers of products and services to the global energy industry.</p><p>Job Duties</p><p>Under general supervision, supports the effective operation and improvement of one or more HR processes. Collaborates with stakeholders, creates tools and resources, and executes basic programs and projects. Develops subject matter expertise in one or more of the following disciplines: Compensation, Benefits, International HR/Global Mobility, Employee Relations, Learning and Development, Talent Acquisition, HR Information Systems, or HR Operations. Supports the efficient delivery of processes, programs and policies through the application of specialized knowledge and skills, analysis, and business acumen. Assists with HR data reporting and analysis used to determine meaningful recommendations and actions to improve overall HR service delivery. May advise HR and business leaders across the organization on best practices.</p><p>Qualifications</p><p>Requires an undergraduate degree in Human Resources Management, Business Administration, or a similar discipline. Master's degree and Professional HR Certification preferred. A minimum of 1 to 2 years experience in HR Operations, HR Generalist is a plus &amp; fresh HR graduates are also encourage to apply!</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Requires an undergraduate degree in Human Resources Management, Business Administration, or a similar discipline.</li><li>Master's degree and Professional HR Certification preferred.</li><li>A minimum of 1 to 2 years experience in HR Operations, HR Generalist is a plus &amp; fresh HR graduates are also encourage to apply!</li></ul><p></p></section>

<p>Should have an Interdisciplinary knowledge in Technical and Commercial document understanding, standards and regulations.</p><p>Should have Minimum 8 years of work experiences in construction/execution, estimation, planning in international EPC/Multi discipline construction companies serving the oil and gas/refinery/petrochemical.</p><p>Hands on experience in generation of MTO’s /BOQ’s from the drawings.</p><p>Able to read and understand GA Drawings, P&amp;IDs.</p><p>&nbsp;</p>

<p><b>Role: MEP Engineer</b></p><p>Industry Type: Oil &amp; Gas</p><p>Department: Construction &amp; Site Engineering</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Construction Engineering</p><p>Education</p><p>UG: B.Tech / B.E. in Mechanical Engineering, Electrical</p>

<p>Minimum 6 years exp. in Oil &amp; Gas Experience. Able to position a fire department pumper to operate at a fire hydrant and at a static water source, power transfer from vehicle engine to pump, draft, operate pumper pressure control systems.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The suitable candidate should have a minimum of 12-15 years of relevant mechanical experience within the Oil &amp; Gas industry together with a minimum of 2-5 years' experience in the design and construction of onshore plants. The ideal candidate shall be familiar with industry standard codes and construction practises. Will perform liaison duties between Client and Contractor reporting to the Resident Engineer.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>12+ Years experience required</p><p>Candidate available immediately within Kuwait preferred</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The suitable candidate should have a minimum of 12-15 years of relevant mechanical experience within the Oil &amp; Gas industry together with a minimum of 2-5 years' experience in the design and construction of onshore plants. The ideal candidate shall be familiar with industry standard codes and construction practises. Will perform liaison duties between Client and Contractor reporting to the Resident Engineer.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>12+ Years experience required</p><p>Candidate available immediately within Kuwait preferred</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Electrician works as a member of the engineering team. This team, consisting of the Mechanic, Electrician, Motorman (where appropriate), and Welder, work under the supervision and direction of the Toolpusher. As such, it is imperative that each member of the team be a self-starter and willing to assist the other worker in the performance of the job when requested to do so. The Electrician is also responsible for the simple repair and general maintenance of the following areas of the rig:</p><ul><li>1. Deck Equipment<ul><li>a. Leg depth indicator</li><li>b. A.C. motors that drive;<ul><li>1. Elevator motor units (jacking)</li><li>2. Skidder gear unit (longitude and transvers</li><li>3. Raw water tour gear unit</li><li>4. Raw water pump</li></ul></li><li>c. Electric cranes and controls</li></ul></li><li>2. Drilling Equipment<ul><li>a. Electrical brake</li><li>b. Drilling equipment control console</li><li>c. Mud pump control console</li><li>d. A.C. motors that drive:<ul><li>1. Draw-works clutch and brake cooling pump</li><li>2. Crane</li><li>3. Draw-works drive blower</li><li>4. Rotary table drive blower</li><li>5. Rig floor hydraulic power unit</li><li>6. Bulk air compressor</li><li>7. Mud mixer</li><li>8. Hopper pump</li><li>9. Shale shaker</li><li>10. Degasser pump</li><li>11. Accumulator unit</li><li>12. Desander pump</li></ul></li><li>d. D.C. motors that drive:<ul><li>1. Draw-works</li><li>2. Rotary table</li><li>3. Top Drive</li></ul></li></ul></li><li>3. Engine Room<ul><li>a. A.C. motors that drive:<ul><li>1. Saltwater pump system</li><li>2. Non portable water pump system</li><li>3. Oil pump system</li><li>4. Air compressor system</li><li>5. Vent exhaust and supply fans</li></ul></li><li>b. Bus, control circuits and individual feeders</li><li>c. Switchboard</li><li>d. A.D. generators</li><li>e. Motor generator set</li><li>f. SCR system</li><li>g. Tachometer generator</li><li>h. Engine alarm system</li><li>i. Battery charger</li><li>j. Ventilation system</li></ul></li><li>4. Living Quarters<ul><li>a. Marine range</li><li>b. Fry range</li></ul></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Diploma / Graduate Degree in Electrical Engineering ( coupled with required experience as mentioned)</p><p>Training in Top Drive systems / Canrig systems</p><p>Current - valid training</p><p>Certifications required by KOC for their Oil Fields will be an advantage.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>An internship is your opportunity to understand how we work and whether our culture is right for you. It's also your chance to show us that you have the right skills and attitude to succeed here. Our internships are paid positions, and last between a few months to a whole year-offering opportunities to use what you've learned at university on real projects.</p><br><p>We offer two different internships in Operations. If you're applying for a Field Engineer internship, you must have completed your second year of an undergraduate degree in engineering or a relevant science. If you're applying for a Field Specialist internship, you must be working towards a two-year technical diploma or associate degree.</p><br><p>SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><br> </div>

<p>The Manager, IT Services, provides strategic and operational leadership for IT services across Precision Drilling's Middle East operations, ensuring reliable technology infrastructure, cybersecurity, vendor management, and project delivery. This role partners closely with regional business leaders, vendors, and global IT teams to deliver technology solutions that support business performance and operational excellence.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Degree or diploma in Information Technology, Computer Science, or related field (or equivalent experience)</li><li>3+ years of experience in IT infrastructure, operations, or technical support, including experience leading teams, vendors, projects, or cross-functional initiatives</li><li>Strong knowledge of Microsoft 365, networking, endpoint management, cybersecurity, identity and access management, and IT service management</li><li>Experience managing third-party vendors and telecommunications providers; exposure to SAP, ServiceNow, ITIL, or relevant technical certifications is an asset</li><li>Strong leadership, communication, problem-solving, and customer service skills with the ability to manage competing priorities and build relationships across technical and business teams</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Zeal Group is an award-winning FinTech organisation offering a variety of products. Established in 2017, we have rapidly expanded to a team of over 700 employees globally. Traze is a subsidiary brand of Zeal Group. Our headquarters are in London and have offices spanning Europe, Asia, North and South Africa, the Middle East, and Cyprus is the home of our Technology Hub. We are a product and people focused company who are passionate about growth, innovative technology, and collaboration</p><p>Responsibilities</p><ul><li>Build and develop relationships with potential Clients and Partners who may have clients interested in trading multi-asset products such as Gold, Oil, FX, and Cryptocurrencies.</li><li>On-board IB s and help them increase accounts, deposits, and revenues.</li><li>Identify and target known Money Managers and IB s in the MENA Region.</li><li>Organically build a book of business through relationships in and outside the market targeting potential IB s from multiple industries.</li><li>Determine customers' trading needs and prepare proposals to sell services that address these needs.</li><li>Cross-sell retail clients who meet the IB threshold to grow their business and walk them through the client growth life cycle.</li><li>Stay up to date on market news and trends in FX, Commodities, Stocks, and Indices.</li><li>Advise on trading strategies, options, and risk management strategies.</li><li>Explain industry terms or trading practices to clients.</li><li>Attend industry and company events to source own potential clients as directed by management.</li><li>Achieve sales targets.</li><li>Contact prospective or existing customers to discuss their queries and requirements.</li><li>Develop sales presentations or proposals to explain service specifications.</li><li>Maintain customer records by using the CRM and logging communication.</li><li>Receive and follow-up on clients funding, volume, and new account activations.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Academic Qualification Requirement: B.Sc. Degree from any discipline</p><p>4+ years of extensive experience in Forex / CFD brokerage sales environments</p><p>Professional Key Knowledge Area Requirement:</p><ul><li>Strong understanding of FX, commodities, indices, and equity markets</li><li>A hunter mindset, you chase targets, not titles</li><li>Excellent communication and negotiation skills across cultures and regions</li><li>Strategic thinking paired with hands-on execution</li><li>Financial markets knowledge in FX, Stocks, Commodities</li><li>Technical and Fundamental analysis</li></ul><p>Skills &amp; Competencies</p><ul><li>Strong relationship management and networking skills</li><li>Selling Skills.</li><li>Communication skills.</li><li>Customer orientation.</li><li>Learning flexibility</li></ul><p></p></section>

<p>The Aircraft Mechanic III performs the full range of military tactical aircraft maintenance and maintains repairs and modifies aircraft structures and structural components of complex to extreme difficulty. Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components. Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. Apply professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Make entries in aircraft logs and records, and responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts. Plan, conduct, and supervise aircraft technical inspections. Compute basic weight and balance records. Participate in maintenance test flights and operation checks as required. Ensure compliance with aircraft configuration control, Army oil analysis Program and test measuring diagnostic equipment calibration. Provide lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards and operational policies. Prepare evaluations, special reports, and records pertaining to aircraft maintenance repair and related activities. Perform other duties as requested.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>This role requires candidate to obtain Disclosure and Barring Service (DBS) check through UK Govt prior to deployment.</li><li>Completion of high school or equivalent required. Five (5) or more year s aviation maintenance experience within the past ten (10) years on that mission design series (MDS).</li><li>Experience in maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components.</li><li>Must be in possession of a Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</li><li>Able to clear CENTCOM Medical for deployment.</li></ul><h2>Knowledge &amp; Skills</h2><ul><li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</li><li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li><li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</li><li>Working knowledge of technical publications and Logistics Information Systems.</li><li>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</li><li>Participate in maintenance test flights and operation checks as required.</li><li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</li><li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li></ul><h2>Physical Requirements/Working Environment</h2><ul><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders, and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Will handle dirty parts and lubricants.</li><li>Will be required to wear proper Personal Protective Equipment (PPE).</li><li>Must be able to pass a Respirator Physical and Fit Test qualification.</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds.</li><li>May work in maintenance shop or outside.</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li><li>May be exposed to extreme noise from operating equipment.</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul>

<p>The Aircraft Mechanic III performs the full range of military tactical aircraft maintenance and maintains repairs and modifies aircraft structures and structural components of complex to extreme difficulty.</p><p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components.</p><p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation.</p><p>Apply professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals.</p><p>Make entries in aircraft logs and records, and responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.</p><p>Plan, conduct, and supervise aircraft technical inspections.</p><p>Compute basic weight and balance records.</p><p>Participate in maintenance test flights and operation checks as required.</p><p>Ensure compliance with aircraft configuration control, Army oil analysis Program and test measuring diagnostic equipment calibration.</p><p>Provide lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards and operational policies.</p><p>Prepare evaluations, special reports, and records pertaining to aircraft maintenance repair and related activities.</p><p>Perform other duties as requested.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>This role requires candidate to obtain Disclosure and Barring Service (DBS) check through UK Govt prior to deployment.</li><li>Completion of high school or equivalent required.</li><li>Five (5) or more year s aviation maintenance experience within the past ten (10) years on that mission design series (MDS).</li><li>Experience in maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components.</li><li>Must be in possession of a Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</li><li>Able to clear CENTCOM Medical for deployment.</li></ul><h3>Knowledge &amp; Skills</h3><ul><li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</li><li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li><li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</li><li>Working knowledge of technical publications and Logistics Information Systems.</li><li>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</li><li>Participate in maintenance test flights and operation checks as required.</li><li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</li><li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li></ul><h3>Physical Requirements/Working Environment</h3><ul><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders, and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Will handle dirty parts and lubricants.</li><li>Will be required to wear proper Personal Protective Equipment (PPE).</li><li>Must be able to pass a Respirator Physical and Fit Test qualification.</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds.</li><li>May work in maintenance shop or outside.</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li><li>May be exposed to extreme noise from operating equipment.</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul>

<p>About the Role: We are seeking a skilled Technical Engineer to provide technical support for marine construction and offshore projects. The ideal candidate will be responsible for reviewing designs, preparing technical documentation, coordinating with engineering teams, and ensuring that project activities comply with specifications, codes, and client requirements. Key Responsibilities: • Review and interpret engineering drawings, specifications, and technical documents for marine construction projects • Prepare technical submittals including method statements, calculations, and material specifications • Coordinate with design engineers, project managers, and site teams to resolve technical issues • Ensure all technical activities comply with project specifications, international codes (ISO, BS, ASTM, API), and client requirements • Assist in preparing and reviewing shop drawings, as-built drawings, and technical reports • Provide technical support during construction, installation, and commissioning phases • Conduct technical inspections and quality checks to verify compliance with approved documents • Liaise with clients, consultants, subcontractors, and suppliers on technical matters • Review and approve subcontractor technical submittals and material approvals • Prepare technical queries (TQs) and coordinate with consultants for resolution • Support procurement team in technical evaluation of suppliers and materials • Maintain accurate technical documentation and filing systems • Assist in preparing project close-out reports and technical handover documents • Stay updated on latest engineering standards, technologies, and industry best practices • Provide training and guidance to junior engineers and site staff</p><p>Qualifications & Experience: • Bachelor's degree in Civil Engineering, Mechanical Engineering, Marine Engineering, or related field • Minimum 5+ years of experience as Technical Engineer in marine, construction, or oil & gas industries • Strong knowledge of engineering principles, codes, and standards (ISO, BS, ASTM, API, etc.) • Experience with marine construction, piling, subsea pipelines, or offshore structures is highly preferred • Proficiency in engineering software such as AutoCAD, STAAD Pro, or similar • Familiarity with project documentation and technical submittal processes • Strong understanding of quality assurance and quality control (QAQC) principles • Valid safety certifications (NEBOSH, IOSH, OSHA) preferred • Fluency in English; Arabic or Hindi/Urdu is a plus • Professional membership (e.g., ICE, IMarEST) is an advantage Required Skills: • Strong technical knowledge and analytical abilities • Good communication and coordination skills • Attention to detail for documentation and compliance • Problem-solving and technical troubleshooting skills • Ability to work under pressure and meet deadlines • Team collaboration with engineering, procurement, and construction teams</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The suitable candidate should have a minimum of 12 years of relevant designs, installs, and maintains cathodic protection systems to prevent corrosion of pipelines, storage tanks, and other metallic structures. They conduct corrosion surveys, monitor system performance, and perform testing to ensure effective protection. The role involves troubleshooting CP systems, preparing technical reports, and ensuring compliance with industry standards. They work extensively in the oil &amp; gas, petrochemical, marine, and infrastructure sectors.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>12+ Years experience required </p><p>Candidate available within Kuwait preferred</p><p></p></section>