Limousine Drivers Jobs - Capital Governorate (Kuwait) Kuwait

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Versatile, self-starting individual who works well on their own, with very little supervision, to develop/improve a behavior based Environmental, Safety and Health program candidate must have an in-depth knowledge of Federal, Local, and Army environmental, safety, and occupational health methods, practices, principles and procedures to perform effectively; promotes a wide variety of training activities designed to achieve awareness of environmental, safety, and health hazards and corresponding preventive procedures; on a recurring basis, inspect facilities and organizations to cite legal violations, recommend corrective actions, and insure that hazardous conditions are eliminated. Works with managers, supervisors, leads, and officials to eliminate or control hazardous operations or conditions. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Requires an active Secret Clearance</li><li>One-year related experience may be substituted for one year of education, if degree is required.</li><li>Bachelor s degree in environmental, safety, health or related discipline is preferred; or combination of Associate degree with two years experience.</li><li>One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience.</li><li>At least four years experience as environmental, safety, and health specialist with two years in a leadership position</li><li>Experience in a behavior-based safety and environmental compliance program</li><li>Experience with a customer service-oriented company.</li><li>Working knowledge of management systems such as OHSAS 18001 or ISO 14001</li><li>Familiarity with DOD, Army, EPA, and Federal regulations.</li><li>Military background and training is beneficial.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> <b>Job Summary</b> </p> <p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. </p> <p> </p> <p>Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance. </p> <p> </p> <p>Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements. </p> <p> </p> <p>USAF equivalent position is Munitions/Weapons Technician Apprentice.<b> </b> </p> <p> </p> <p> <b>Essential Responsibilities: </b> </p> <p> </p> <p> Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. </p> <p> Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components. </p> <p> Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures. </p> <p> Inspect bomb release systems and missile launchers to determine need for repair or destruction. </p> <p> Assist in management of all inspection, maintenance, and storage of munitions and support equipment. </p> <p> Support quality assurance, compliance, continuity, and standardization of munitions programs. </p> <p> Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems. </p> <p> Maintain weapons certification and currency. </p> <p> Assist with availability and serviceability of munitions to support and meet customer requirements. </p> <p> Perform all other duties as assigned or requested.</p> <p> </p> <p> <b>Minimum Requirements:</b> </p> <p> </p> <p> Must have High School diploma or have completed relevant military and/or vocational technical school curriculum. </p> <p> Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required. </p> <p> Completed USAF Munitions/Weapons Tech School or DoD equivalent. </p> <p> Must possess basic knowledge of technical publications related to aircraft maintenance. </p> <ul> <li>Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo</li> </ul> <p> Must be able to inspect and operate ground support and auxiliary equipment. </p> <p> Must achieve a passing grade in all required courses/certifications for continued employment, as needed. </p> <p> Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment. </p> <ul> <li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li> </ul> <p> Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods. </p> <p> Must be able to speak, read, write, and understand English. </p> <p> Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance. </p> <p> Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</p> <p> Must submit updated SF-86 within 30 days of hire start date. </p> <p> Must have current/active State Issued Driver s License. </p> <p> Must be able to acquire and maintain a valid flight-line Government Driver s License. </p> <p> Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages. </p> <p> Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</p> <p> </p> <p> <b> Preferred Qualifications:</b> </p> <p> <b> </b> </p> <p> Associate degree in a relevant career field. </p> <p> RPA Deployment Experience. </p> <p> Prior Experience as a Defense Contractor. </p> <p> Munitions/Weapons experience within the last 10 years<b>. </b> </p> <p> </p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance. Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements. USAF equivalent position is Munitions/Weapons Technician Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li><li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li><li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li><li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li><li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li><li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li><li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li><li>Maintain weapons certification and currency.</li><li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li><li>Perform all other duties as assigned or requested.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must have High School diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required.</li><li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li><li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li><li>Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications:</p><ul><li>Associate degree in a relevant career field.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Munitions/Weapons experience within the last 10 years .</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The Supply Technician II assists with documents pertaining to work orders completed within the MST (Maintenance Support Team) and is responsible for the OMDAC-SWACA calibration program. Provides weekly/monthly maintenance work order reports within the section and performs technical supply management tasks (e.g., inventory management, storage management, maintenance tagging of equipment). Has knowledge of supply operations and program requirements and the ability to apply established supply policies, day-to-day servicing techniques, regulations, and procedures. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Ability to obtain a National Agency Check with Inquires (NACI) to obtain a Common Access Card (CAC).</li><li>Ability to obtain and maintain a Secret level security clearance is preferred.</li><li>One-year related experience may be substituted for one year of education, if degree is required.</li><li>High School diploma or GED required.</li><li>Some college preferred.</li><li>IASSC: Lean Six Sigma: Green Belt preferred</li><li>One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience.</li><li>A minimum of five years experience in Supply operations.</li><li>Experience with automated supply management systems.</li><li>Must be able to obtain a forklift license.</li><li>Experience with a customer service-oriented company.</li><li>At least two years of supervisory or lead experience is preferred.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Conducts VTC conferences, operates VTC equipment such as VTC conferencing equipment, consoles, Digital Video Recorders (DVD), cameras, microphones, desktop and laptop computers supporting VTC events. Reports to the Site Manager as required. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position. Responsibilities Coordinates with customer to endure equipment is operational. Sets-up and operates VTC equipment. Establishes end to end secure and non-secure connectivity to support conferences. Establishes proper cable connection and routing to various Audio/Video and communication links. Adjusts sound and light levels for optimum performance of equipment and comfort of customers. Troubleshoots VTC and connectivity problems with local and distant end technical control facilities and help-desks to restore communication and resolve poor reception/transmission issues. Troubleshoots equipment; configures modems and data timing and transfer rates. Resolves connectivity problems with technical personnel. Performs weekly maintenance on all associated VTC equipment. Operates, administers, and maintains the VTC Bridge. Required to manipulate the bridge to provide technical support for all VTC circuits attached. Performs other duties and assignments as required.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Security Clearance: Requires an active Secret Clearance</p><p>Education/Certifications: One year related experience may be substituted for one year of education, if degree is required. High School diploma or GED required.</p><p>Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience. Requires a minimum of 5 years experience in Video Teleconferencing or Audio Video Productions. Must be able to work rotating shift schedules which provide 24 hour day/7 day week coverage. Experience with a customer service-oriented company.</p><p></p></section>

<p>POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.</p><p><strong>Desired Candidate Profile</strong></p><h2>PREFERRED QUALIFICATIONS</h2><p>Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver s License</p><h2>REQUIRED QUALIFICATIONS</h2><p>Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements.</p>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level electronic maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. USAF equivalent position is Avionics Technician Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Applies basic technical knowledge to solve unusually complex problems that affect operational and maintenance capabilities.</li><li>Requires a basic understanding of the interrelationships of circuits and associated systems.</li><li>Exercises independent judgment in performing assigned tasks in conjunction with designated direction from Production Staff, Avionic Leads, Avionics/Com Technician IIIs, or Avionics Technician IIs.</li><li>Uses common and complex test instruments in the performance of assigned duties.</li><li>Maintains, repairs, and installs various types of electronic equipment and related devices.</li><li>Applies basic technical knowledge of electronics principles in determining malfunctions and applies skill in restoring equipment operations.</li><li>Must be able to work with limited supervision.</li><li>Performs all other duties as assigned as requested.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have High School Diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Avionics and/or GCS maintenance experience required.</li><li>Must have basic knowledge of basic and complex electronics maintenance and repair.</li><li>Must have basic knowledge of RFF systems, components, and accessories.</li><li>Must possess general understanding of technical publications related to Aircraft electronics maintenance.</li><li>Must know basic theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a thorough understanding of electrical and electronic principles.</li><li>Must be capable of using and reading blueprints, wiring diagrams, and data tables.</li><li>Must be eligible to gain and maintain one of the following IAT Level II certifications: CCNA Security, CySA+, GICSP, Security+ CE, SSCP, or GSEC, IAW DOD 8570.01-M commensurate with the assigned duties within 90 days of hire or after the second deployment.</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must have current/active State Issued Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li><li>Current IAT Level II Certification.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>MQ-9 Experience as an Avionics Technician.</li><li>Avionics Technician experience within the last 10 years.</li></ul>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level electronic maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.USAF equivalent position is Avionics Technician Apprentice.</p><p><b><br></b></p><p><b>Essential Responsibilities:</b></p><ul><li>Applies basic technical knowledge to solve unusually complex problems that affect operational and maintenance capabilities.</li><li>Requires a basic understanding of the interrelationships of circuits and associated systems.</li><li>Exercises independent judgment in performing assigned tasks in conjunction with designated direction from Production Staff, Avionic Leads, Avionics/Com Technician IIIs, or Avionics Technician IIs.</li><li>Uses common and complex test instruments in the performance of assigned duties.</li><li>Maintains, repairs, and installs various types of electronic equipment and related devices.</li><li>Applies basic technical knowledge of electronics principles in determining malfunctions and applies skill in restoring equipment operations.</li><li>Must be able to work with limited supervision.</li><li>Performs all other duties as assigned as requested.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Must have High School Diploma or have completed relevant military and/or vocational technical school curriculum.</p><p>Minimum of one year of actual Aircraft Avionics and/or GCS maintenance experience required.</p><p>Must have basic knowledge of basic and complex electronics maintenance and repair.</p><p>Must have basic knowledge of RFF systems, components, and accessories.</p><p>Must possess general understanding of technical publications related to Aircraft electronics maintenance.</p><p>Must know basic theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a thorough understanding of electrical and electronic principles.</p><p>Must be capable of using and reading blueprints, wiring diagrams, and data tables.</p><p>Must be eligible to gain and maintain one of the following IAT Level II certifications: CCNA Security, CySA+, GICSP, Security+ CE, SSCP, or GSEC, IAW DOD 8570.01-M commensurate with the assigned duties within 90 days of hire or after the second deployment.</p><p>Must be able to inspect and operate ground support and auxiliary equipment.</p><p>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</p><p>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</p><p>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</p><p>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</p><p>Must be able to speak, read, write, and understand English.</p><p>Must submit updated SF-86 within 30 days of hire start date.</p><p>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</p><p>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</p><p>Must have current/active State Issued Driver s License.</p><p>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</p><p>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</p>

<p>Provides centralized retail supply and maintenance support; performs aspects of supply management work (e.g., inventory management, storage management, bar coding, property utilization) related to depot, local, or other supply activities. Has a knowledge of supply operations and program requirements and the ability to apply established supply policies, day-to-day servicing techniques, regulations, and procedures.</p><p><strong>Program:</strong> OMDAC-SWACA</p><p>This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position.</p><p><strong>Responsibilities</strong></p><ul><li>Performs inventory management procedures, including ordering, receiving and storing supplies.</li><li>Selects the correct stock for issue, creates and process material release orders, and keeps records on incoming and outgoing stock.</li><li>Reconciles customer documentation with the PSRA and SSA on issues, receipts, storage of supplies and equipment, and financial discrepancies.</li><li>Screens dues-out reconciliation listings &amp; prepares cancellation/follow up documents.</li><li>Establishes and maintains automated and manual accounting records and corrects errors and exception documents.</li><li>Provides status on supply requests, shipments and job-ordered items.</li><li>Operates a Cannibalization Point in accordance with AR 710-2.</li><li>Reconciles open requests, repairable exchange items and cannibalization items.</li><li>Establishes and maintains stock records and other documents such as inventory, material control, accounting and supply reports.</li><li>Assists in validating property book inventories for equipment at the sites.</li><li>Performs prescribed load list and shop stock list duties to assist the DSSTs.</li><li>Compare packing lists, receipt documents, bills of lading, inspection reports, other documents, with purchase orders/requisitions to verify accuracy of stock data and quantities received against bills of lading, and shipping documents.</li><li>Assures stock numbers/prices/sources of data are correct through use of Army Master Data File (AMDF), Supply Bulletins (SBs), supply letters, regulations, etc.</li><li>Revises quantities ordered based on number of items on hand &amp; reviews records for possible substitution of items.</li><li>Unloads, unpacks, inspects, counts, segregates and stores incoming supplies.</li><li>Prepare Forms 2404, 2407) to submit a work order to the maintenance department.</li><li>Repair and constructs fiberboard or wooden containers.</li><li>Constructs bins, shelving and other storage aids.</li><li>Packs, crates, stencils, weigh and bands equipment and supplies.</li><li>Loads, unloads and moves stock using equipment such as forklifts and hand trucks.</li><li>Required to climb a ladder and stand for long periods of time.</li><li>Performs other duties and assignments assigned.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Ability to obtain a National Agency Check with Inquires (NACI) to obtain a Common Access Card (CAC).</li><li>Ability to obtain and maintain a Secret level security clearance is preferred.</li><li>High School Diploma required.</li><li>Some college preferred.</li><li>OSHA 10-Hour General Industry certification</li><li>Minimum three years experience in Unit Level Supply Management and Property Control.</li><li>Must have a working knowledge of Microsoft Office, SAMS, and ULLS-G.</li><li>Knowledge of principles and methods for accountability of supplies and equipment at retail/wholesale level, warehousing and moving goods by air, rail, sea, or road.</li><li>Experience with a customer service-oriented company.</li><li>Proficiency in using a computer - desktop or laptop.</li><li>Proficiency in using Microsoft productivity software.</li><li>Proficiency in using Email client software.</li><li>Other software / work management tools as directed</li><li>Forklift operation</li></ul>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level electronic maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.USAF equivalent position is Avionics Technician Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Applies basic technical knowledge to solve unusually complex problems that affect operational and maintenance capabilities.</li><li>Requires a basic understanding of the interrelationships of circuits and associated systems.</li><li>Exercises independent judgment in performing assigned tasks in conjunction with designated direction from Production Staff, Avionic Leads, Avionics/Com Technician IIIs, or Avionics Technician IIs.</li><li>Uses common and complex test instruments in the performance of assigned duties.</li><li>Maintains, repairs, and installs various types of electronic equipment and related devices.</li><li>Applies basic technical knowledge of electronics principles in determining malfunctions and applies skill in restoring equipment operations.</li><li>Must be able to work with limited supervision.</li><li>Performs all other duties as assigned as requested.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have High School Diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Avionics and/or GCS maintenance experience required.</li><li>Must have basic knowledge of basic and complex electronics maintenance and repair.</li><li>Must have basic knowledge of RFF systems, components, and accessories.</li><li>Must possess general understanding of technical publications related to Aircraft electronics maintenance.</li><li>Must know basic theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a thorough understanding of electrical and electronic principles.</li><li>Must be capable of using and reading blueprints, wiring diagrams, and data tables.</li><li>Must be eligible to gain and maintain one of the following IAT Level II certifications: CCNA Security, CySA+, GICSP, Security+ CE, SSCP, or GSEC, IAW DOD 8570.01-M commensurate with the assigned duties within 90 days of hire or after the second deployment.</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months.</li><li>Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must have current/active State Issued Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster.</li></ul><p>Preferred Qualifications:</p><ul><li>Current IAT Level II Certification.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>MQ-9 Experience as an Avionics Technician.</li><li>Avionics Technician experience within the last 10 years.</li></ul>

<p>Who Are We We Are Foodics! a leading restaurant management ecosystem and payment tech provider. Founded in 2014 with headquarter in Riyadh and offices across 5 countries, including UAE, Egypt, Jordan and Kuwait. We are currently serving customers and partners in over 35 different countries worldwide. Our innovative products have successfully processed over 6 billion (yes, billion with a B) orders so far! making Foodics one of the most rapidly evolving SaaS companies to ever emerge from the MENA region. Also Foodics has achieved three rounds of funding, with the latest raising $170 million in the largest SaaS funding round in MENA, boosting its innovation capabilities to better serve business owners.</p><p>The Job in a Nutshell We are looking to hire a dynamic and energetic Sales Executive to join our team. This role is crucial in driving Foodics growth by sourcing, closing, and actively maximizing revenue from new and existing partners, particularly focusing on selling our SaaS software to restaurants. The Sales Executive will play a pivotal role in expanding our international reach and boosting collaboration with digital third-party integration apps. If you are passionate about sales, technology, and thrive in a fast-paced environment, we want to hear from you!</p><p><b>What Will You Do</b></p><ul><li>Achieve Targets: Maintain a high closing ratio on qualified leads. Meet and exceed daily, weekly, and monthly KPIs to hit sales targets.</li><li>Lead Generation and Acquisition: Generate new leads by leveraging digital marketing campaigns and participating in industry networking events. Convert demo sessions into confirmed sales.</li><li>Relationship Management: Establish relationships with new strategic partners and maintain positive business relationships with existing and potential partners to ensure future sales.</li><li>CRM Proficiency: Use CRM systems to follow up on projects and cases related to customers, ensuring meticulous tracking and reporting of sales activities.</li><li>Data-Driven Approach: Leverage data and CRM insights to inform sales strategies and optimize performance.</li><li>Pipeline Generation: Proven ability to generate a sales pipeline that is four times the monthly quota.</li><li>Skill Development: Complete all scheduled training sessions on new product features and advanced sales techniques. Achieve high scores on product knowledge assessments.</li><li>Innovative Mindset: Foster a creative and dynamic startup attitude, contributing innovative ideas to drive business growth.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>What Are We Looking For</h2><ul><li><strong>Educational Background:</strong> BS/BA degree in Business, Information Technology, Computer Science, or a related field.</li><li><strong>Sales Experience:</strong> 2-3 years of direct sales experience in Information Technology, FMCG, Software, or SaaS industries is preferred. Talented fresh graduates with a passion for SaaS sales will also be considered.</li><li><strong>Analytical Skills:</strong> Strong analytical and problem-solving abilities.</li><li><strong>Communication Skills:</strong> Excellent communication skills in English and Arabic. Fluency in other languages is a plus.</li><li><strong>Mobility:</strong> Valid driver s license and access to a personal car, with a willingness to conduct fieldwork.</li><li><strong>Independence:</strong> Self-starter with the ability to work independently across functional groups and manage multiple initiatives simultaneously.</li><li><strong>Adaptability:</strong> Flexibility to thrive in a fast-paced and evolving environment.</li><li><strong>Passion:</strong> Enthusiasm for technology and being part of a fast-growing SaaS company.</li></ul><h2>Who Will Excel</h2><ul><li>Previous experience in the SaaS, technology, or F&amp;B industry.</li><li>A proactive approach with a track record of exceeding sales targets.</li><li>A collaborative team player with a passion for driving growth and innovation.</li></ul>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.USAF equivalent position is Aircraft Mechanic Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Performs all daily launch/recovery duties in support of operational requirements.</li><li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li><li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li><li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li><li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li><li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li><li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li><li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li><li>Must be able to work with little-to-no supervision.</li><li>Performs all other duties as assigned as requested.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Mechanic maintenance experience required.</li><li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li><li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li><li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications</p><ul><li>Associate degree in a relevant career field.</li><li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Aircraft Mechanic Experience within the last 10 years.</li><li>MQ-9 Experience as an Aircraft Mechanic.</li><li>MQ-9 Aircraft Composite Repair / Replacement Experience.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">The Transportation Lead provides comprehensive movement control, transportation synchronization, and multimodal distribution support across the USCENTCOM Area of Responsibility. This role integrates Air Coordination Cell operations, container management, convoy coordination, customer service, staging area management, and HAZMAT documentation. The position requires proficiency with IBS-CMM, CMOS, RFID systems, and compliance with DTR 4500.9-R Part II. Additionally, the role supports operational sustainment, movement control, and distribution activities for the 1st Theater Sustainment Command (1 TSC), including planning, tracking, and coordinating strategic and tactical movement of personnel, cargo, and equipment across air, land, and sea. The position ensures accurate execution of provisioning, inventory, maintenance, repair, and transportation activities while contributing to the refinement of logistics policies and the integration of processes across teams and partner organizations.HOW YOU WILL MAKE AN IMPACT:Provide leadership to CRSP teams including Line Haul, Air Coordination Cell, Container Processing, Container Fabrication, Customs Clearance, and TAS teams.Verify DD Form 1149, TAC Codes, DODAACs, shipment priority, and POC information.Receive cargo from all transportation modes and process for delivery.Validate manifests, MROs, DD Form 1149, and DD Form 1384.Prepare sensitive cargo documentation including DD Form 1387-2 and DD Form 1907.Coordinate pre-Joint Inspections and Joint Inspections.Build and inspect 463L pallets IAW DTR 4500.9-R Part II.Coordinate with KMOI and MCTs for required movement.Perform pre-JIs to ensure compliance with Air Force regulations.Transport or coordinate transportation to/from APOE/D.Prepare DD Form 1384 TCMD and complete prime/trailer card entries.Conduct export inspections with Military Customs.Compute center of balance and weight for rolling stock.Maintain historical cargo movement data across the AOR.Operate MHE including 4K 100K forklifts and container handlers.Support ocean freight movement through designated SPOE/D.Lead convoy operations ensuring preparation, safety, and accountability.Deliver daily and weekly safety briefings.Support logistics requirements through analysis, planning, and coordination.Manage LIS data including GCSS-Army.Oversee purchasing, transportation, warehousing, and production control.Ensure host-nation compliance for company/contract vehicle documentation.Plan and coordinate logistics, transportation, and customer service activities.Ensure compliance with legal, military, and ISO requirements.Plan, schedule, and track movements across all transportation nodes.Create and manage TMRs using LOADOUT and other LIS tools.Coordinate route, highway, airspace, and customs clearances.Support intermodal operations including distribution, retrograde, and onward movement.Maintain ITV using approved DoD systems.Assist with BBPCT (blocking, bracing, packing, crating, and tie-down).Participate in movement boards and multinational coordination meetings.Ensure documentation compliance per DTR 4500.9-R.Support container management and ensure accurate JCM reporting.Ensure adherence to U.S., USCENTCOM, USARCENT, and 1 TSC policies.Maintain awareness of HAZMAT requirements and ensure certification compliance.WORKING ENVIRONMENTWork is performed in outdoor, warehouse, and operational environments with potential exposure to physical, chemical, and biological hazards. PPE is required in designated areas. Must comply with OSHA, EPA, Fire Regulations, host-nation policies, and company safety standards.PHYSICAL ACTIVITIESWork requires heavy lifting up to 70 pounds, climbing, stooping, prolonged standing or sitting, and working near hazardous materials or equipment.MINIMUM QUALIFICATIONSHigh school diploma and 9 yrs of experience. (will consider other combinations of education, military, training and experience) Ability to obtain a Kuwait/Host Nation Driver s License.Minimum of seven (7) years of related logistics, transportation, distribution, movement control, or DoD operations experience. Knowledgeable in HAZMAT certification, TMR, and TCMD processing. Experience working in austere environments preferred.Supervisory, leadership, or management experience.Ability to engage with employees and customers with a service-oriented attitude.Knowledge of strategic planning, resource allocation, and workflow coordination.Strong interpersonal and negotiation skills.Ability to prioritize and manage demanding workloads.Ability to work under pressure.Intermediate proficiency in Word, Excel, and Outlook.Strong organizational and analytical skills.Ability to interpret transportation regulations including DTR 4500.9-R.Experience with stock control and asset management.Proficiency with LIS systems including LOADOUT, GCSS-Army, IGC, and JCM.Strong attention to detail.Valid US and Host Nation driver s license.Active U.S. SECRET clearance.Valid U.S. passport (minimum 2 years validity, 4 blank pages).Ability to pass CRC requirements and work a 48-hour workweek.Willingness to deploy to Iraq, Kuwait, Jordan, Saudi Arabia, Bahrain, Qatar, UAE, or other assigned areas.CERTIFICATIONSHAZMAT/HAZCOM certification (required or obtainable).Additional theater-required certifications including AT, OPSEC, Cyber, etc. GDIT IS YOUR PLACEAt GDIT, the mission is our purpose, and our people are at the center of everything we do. Growth: AI-powered career tool that identifies career steps and learning opportunities Support: An internal mobility team focused on helping you achieve your career goals Rewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay and paid time off Community: Award-winning culture of innovation and a military-friendly workplaceOWN YOUR OPPORTUNITYExplore a career in supply chain and logistics at GDIT and you ll find endless opportunities to grow alongside colleagues who thrive on efficiency, accuracy, and accountability.</div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship. USAF equivalent position is Aircraft Mechanic Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Performs all daily launch/recovery duties in support of operational requirements.</li><li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li><li>Supports aircraft utilization and maintenance activity schedules.</li><li>Maintains accurate parts inventory during all maintenance activities.</li><li>Performs maintenance and repair tasks and ensures their successful completion.</li><li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability.</li><li>Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li><li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc.</li><li>Diagnoses malfunctions, isolate causes and corrects breaks.</li><li>Tests engine operations, using testing equipment to locate source(s) of malfunction.</li><li>Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li><li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices.</li><li>Disassembles and inspects parts for wear, warping, or other defects.</li><li>Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li><li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories.</li><li>Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li><li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions.</li><li>May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li><li>Must be able to work with little-to-no supervision.</li><li>Performs all other duties as assigned as requested.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Mechanic maintenance experience required.</li><li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li><li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li><li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications</p><ul><li>Associate degree in a relevant career field.</li><li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Aircraft Mechanic Experience within the last 10 years.</li><li>MQ-9 Experience as an Aircraft Mechanic.</li><li>MQ-9 Aircraft Composite Repair / Replacement Experience.</li><li>Highly desired to have a U.S. Passport valid for an additional two years with at least two facing pairs (four total) of blank Visa pages.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Transportation Coordinator is responsible for comprehensive movement control, operational sustainment, and multimodal transportation support across air, land, and sea. This role merges tactical convoy and movement tracking responsibilities with theater-level logistics integration, enabling effective planning, distribution, and accountability of personnel, equipment, and materiel across all operational nodes. How a Transportation Coordinator will make an impact:Monitors all transportation movements and scheduled distribution activities.Supports analysis, planning, and coordination of daily provisioning, maintenance, and repair activities.Conducts convoy briefings, staging area management, and safety briefings.Inputs, validates, and closes movement data in TC-AIMS II, MTS, BCS3, and other systems.Tracks convoys and retrieves reports from Movement Control Teams (MCTs).Maintains historical transportation and movement records.Creates circulation overlays and supports route planning.Analyzes freight cost performance and assists with sourcing transportation carriers.Ensures HAZMAT documentation, certification, and regulatory compliance.Uses LIS systems including GCSS-Army, LOADOUT, IGC, and JCM.Creates and manages Transportation Movement Requests (TMRs).Supports intermodal operations including distribution, retrograde, and container management.Ensures convoy security coordination and link-up with MCTs.Leads cargo truck convoys ensuring mission readiness, safety, and accountability.Supports blocking, bracing, packing, crating, and tie-down operations.Maintains compliance with DTR 4500.9-R, ISO, and host-nation requirements.Participates in movement boards and multinational coordination meetings.Maintains in-transit visibility (ITV) using RFID and DoD systems.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>HS Diploma or equivalent and 6 years related experience (or military experience in lieu of education).</li><li>Working Knowledge of transportation, distribution, warehouse operations, and inventory management.</li><li>Experience in convoy operations, movement control, and transportation documentation.</li><li>Proficiency with LIS systems including LOADOUT, IGC, JCM, GCSS-Army, TC-AIMS II, and MTS.</li><li>Knowledge of HAZMAT certification and handling requirements.</li><li>Experience with MHE (4K, 6K, 10K, 12K, 14K forklifts and 100K container handlers).</li><li>Understanding of intermodal operations and sustainment logistics.</li><li>Strong communication, analytical, and problem-solving skills.</li><li>Ability to work in austere or deployed environments.</li><li>Active U.S. SECRET clearance.</li><li>Valid U.S. passport (minimum 2 years validity, 4 blank pages).</li><li>Ability to pass CRC requirements and work a 48-hour workweek.</li><li>Willingness to deploy to Iraq, Kuwait, Jordan, Saudi Arabia, Bahrain, Qatar, UAE, or other assigned areas.</li><li>Valid US and Host Nation driver s license.</li><li>Certifications:HAZMAT / HAZCOM certification (required or obtainable after hire).Theater-required certifications (AT, OPSEC, Cyber, etc.).Forklift certification for required MHE equipment.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Common Support Equipment Technician diagnoses, repairs, and maintains Common Support Equipment (CSE). Responsibilities include troubleshooting malfunctions, performing scheduled and unscheduled maintenance, analyzing maintenance trends, and documenting actions using automated systems. Technicians utilize various diagnostic tools, such as multi-meters and oscilloscopes, to repair mechanical and electronic systems. They also handle fluids, conduct corrosion treatments, manage hazardous materials, and prepare CSE for deployment. The role includes operating and servicing support equipment and tow vehicles, while adhering to safety, Tool Control, and Foreign Object Damage prevention standards at all times.</p><p>SUMMARY The Common Support Equipment Technician diagnoses malfunctions and repairs Common Support Equipment (CSE); inspects and approves completed maintenance actions; solves repair problems by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on CSE by inspecting, testing and operating CSE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components. As well as stenciling and marking CSE, storing, handling, labeling, using and disposing of hazardous materials and hazardous waste. The Technician prepares CSE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles such as Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety at all times.</p><p>ESSENTIAL FUNCTIONS Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify work performed by another for which he/she is qualified to perform. Reviews, interprets, and applies the assigned maintenance manual procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data. Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Performs O , I and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals. Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications. Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins. Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. Analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, circuit card testers, transistor testers, and hand tools. Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. Performs proper handling and disposal of chemicals and petroleum products required during maintenance. Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system. Performs close tolerance adjustment, repair and rework of equipment in and out of shop area. Services, inspects and tests aviation support equipment used for direct and indirect aircraft support. Troubleshoots, inspects, services, tests and conditions storage batteries to include lead-acid, gel and sealed type. Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE). Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment. Conduct off station maintenance when required. When necessary, performs other duties and supervisory functions, critical to the function of the program and to ensure compliance with the Performance Work Statement (PWS).</p><p>PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is frequently required to use hands to finger, handle, or feel; sit, stand and reach with hands and arms; walk, climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee must be able to lift 20 lbs. and occasionally lift and/or move up to 50 lbs. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must be able to adhere to and comply with all Kuwaiti Labor and Immigration requirements.</li><li>Must be United States (U.S.) citizen, have a high school diploma or equivalent, be able to read, write, and understand the English language.</li><li>Must be able to obtain a United States Passport. If you currently possess a United States Passport and it must have at least 24 months of time remaining before expiration.</li><li>Graduation from a standard four (4) year high school or equivalent (GED).</li><li>Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted.</li><li>Have a strong knowledge base of aviation maintenance procedures (safety, tool control, HAZMAT, Inspection programs, Administrative requirements, support equipment, calibration/torque procedures).</li><li>Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc ) as required by local policies.</li><li>Must be able to obtain / maintain the following required certifications / qualifications: -Applicable Support Equipment licensing - I Level &amp; O Level Tire &amp; Wheel certification -Hydraulic Contamination certification -Collateral Duty Inspector (CDI) qualification</li><li>Must be willing and able to deploy off-site as required to support Kuwait Air Force operations.</li><li>Must be able to work day shift, night shift or weekend duty and travel as part of a maintenance repair team as required.</li><li>Have a strong knowledge base of Intermediate Level Maintenance business procedures.</li><li>Must have a current civilian driver's license, and be able to obtain and maintain a government flight line driver s license.</li><li>Must have an in-depth knowledge of technical orders/job guides/publications read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications.</li><li>Must be able overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations.</li><li>Must have a working knowledge (input and extract data) of computers.</li><li>Must be willing and able to work with job required hazardous materials.</li><li>Must be willing and able to conduct specialty on the job training.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Overview ***This position is physically located in Kuwait in support of LOGCAP*** Under the Supervision of MHE Supervisor, Crane operator provides lift, move, position and support to the Roads and Grounds Section. Exhibits superior workmanship and focuses upon a quality end product. Follows Standard Operating Procedures (SOPs) to ensure all tasks are accomplished safely and with a focus on quality. Completes all tasks in accordance with local Environmental, Health and Safety directives. Assists leadership with the mentoring of new-hire personnel to develop appropriate skillsets. Addresses customer concerns in a prompt, professional and courteous manner. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. Develops an effective plan for the layout, security, and safekeeping of materials and equipment during loading, delivering, and unloading Performs daily preventative maintenance inspections on assigned vehicles and ensures vehicles meet all Kuwaiti and US Government safety requirements for operation on public roadways Maintains a vehicle log in accordance with applicable rules and regulation Follows appropriate safety procedures when transporting equipment Responsible for inspecting the condition of the work site prior to setting up the crane Manipulates the machine to hoist position and/or transport material such as machinery, equipment and other construction products Must be aware of load limits based upon weather conditions and crane capacity Reports vehicle defects, malfunctions, accidents, traffic violations, or damage to the vehicles immediately to the supervisor or manager Control cranes, lifts and other equipment using standard operating procedures to ensure effective transportation of materials and safety for all personnel on site</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High School diploma or equivalent is required</li><li>Must be CAC eligible and/or able to obtain a Common Access Card (CAC)</li><li>Home of country Heavy duty driver s license for operating crane equipment, and the ability to obtain a U.S. Government Motor Vehicle Operator s license.</li><li>National Commission of Certification of Crane Operators (NCCCO)) is a mandatory.</li><li>A minimum of 4 years of operating mobile cranes with Certificate.</li><li>Experience with material handling equipment (forklifts) is a plus</li><li>Basic mechanical knowledge preferred</li><li>Demonstrated ability to read and interpret road maps, traffic signs, traffic signals and other posted regulations regarding transportation and parking</li><li>Knowledge of proper securing methods for various types of cargo; using ropes, blocks, chain, binders, and/or covers</li><li>Knowledge of proper rigging techniques for lifting objects and materials</li><li>Knowledge of US and Kuwait driving regulations and guidelines is preferred</li><li>Must have an excellent understanding of all safety directives and polices regarding the operation of equipment</li><li>Ability to operate a Crane and Heavy Equipment</li><li>Ability to perform safety inspections of crane, heavy equipment, wire rope, hooks, slings and rigging</li><li>Communicates professionally, both orally and in writing</li><li>Interact professionally with the customer, military, and other agency officials</li></ul><p></p></section>

Job Description<br><br>The Fishing Tool Supervisor will support fishing and well re-entry operations in the field. This role involves running a wide variety of fishing and re-entry equipment, while proactively advising clients during open-hole and cased-hole fishing operations, workovers, slot recoveries, and abandonment projects. This is a senior level job for experienced Field Specialists, requiring strong technical expertise and the ability to support decision-making during ongoing operations in often dynamic and fast-changing environments. The Fishing Tool Supervisor plays a crucial role in executing field operations in accordance with operational plans and ensuring deliveries meet or exceed customer expectations. A good knowledge of fishing tools, the well environment and rig systems is essential for this role.<br><br>Responsibilities<br><br> Operate and maintain Fishing and Re-entry equipment in the field. Provide onsite support to customer during ongoing field operations. Assist in testing and adjusting equipment to obtain optimum operating performance. Daily reporting of field operations for ongoing Fishing and Re-entry operations. Work hand in hand with the onshore operations team. Recommend measures to improve methods, performance, and quality to increase efficiency. Accurate and thorough completion of job reports in a timely basis. Support onshore maintenance activities if required. Participate in all client and Weatherford safety systems during ongoing operations as required. Must have the ability to grasp and adapt to changing work environment and conditions. Must be able to perform basic problem solving and troubleshooting when needed. Continue training to expand knowledge and experience of Fishing and Re-entry operations and services. Know and understand Weatherford Quality Policy and comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Workplace Instructions. Must understand and comply with all safety rules and company policies of Weatherford. Work assignments carried out to the highest quality level. Required to work on 24-hour call status. Perform various other duties and activities as assigned by supervisor within the physical constraints of the job. <br><br>Required<br><br> 10-15 + years drilling, fishing and whipstock experience. General knowledge of oilfield equipment. Mechanical ability necessary to perform repairs. Valid Driver license. Basic Microsoft Outlook, Word and Excel computer skills. Self-motivated and capable of working independently when required. Strong team player who collaborates closely with colleagues. Effective teamwork is non-negotiable for success in this role. Excellent English verbal and written communication skills. Must be able to follow instructions. Ability to be on-call 24/7. <br><br>Preferred<br><br>Open Hole & Cased Hole<br><br>Qualification<br><br> High School diploma (or Secondary School Diploma or equivalent) as minimum. Preferred 2 years College degree.

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day s activities and problems that occur to the other shifts using approved communication programs and standards. Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement and the complete and thorough cleanup of the painting or repair area. Test, troubleshoot and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TV's and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>PREFERRED QUALIFICATIONS</h2><p>Education: High school diploma or G.E.D equivalent. Related Work Experience: Some experience in general maintenance, exterior and interior surface preparation and painting. Experience in hotel engineering or maintenance a plus. Supervisory Experience: No supervisory experience.</p><h2>REQUIRED QUALIFICATIONS</h2><p>License or Certification: Driver s License</p><p></p></section>

<p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p><p>The Defensive Cyber Operations (DCO) division within the USARCC-SWA is looking for a Cyber Threat Analyst candidate with strong scripting abilities, experience with systems security administration, and network security technologies. The Cyber Threat Analyst will design, implement, automate, maintain, and optimize measures protecting systems, networks, and information.</p><p>This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program!</p><p>You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position.</p><p>Responsibilities</p><ul><li>Monitor, detect, analyze, and correlate events for potential threat activity using Security Information Event Management (SIEM) systems, Big Data Analytics, and other supporting platforms or applications.</li><li>Investigate and identify the cause, source, and methodology of compromises or incidents.</li><li>Initiate computer incident handling procedures to isolate and investigate potential network information system compromises.</li><li>Perform trend analysis on events and incidents to identify and characterize threats.</li><li>Conduct open-source research to identify commercial exploits or vulnerabilities (i.e., Zero - Day) requiring response actions.</li><li>Prepare formal comprehensive reports and presentations for both technical and executive audiences.</li><li>Configure and optimize software and hardware detection and prevention capabilities.</li><li>Perform host and network-based signature development and standardization for implementation on end-point products or sensor grid.</li><li>Develop, document, and refine Tactics, Techniques, and Procedures (TTP).</li><li>Provide support to the Computer Defense Assistance Program (CDAP).</li><li>Collaborate on the continuous improvement and optimization of DCO strategies and countermeasures.</li><li>Stay informed about the latest cybersecurity threats, technologies, and best practices.</li><li>Collaborate with cross-functional teams to enhance overall DCO posture.</li><li>Maintain up-to-date knowledge of relevant compliance requirements and ensure adherence.</li><li>Assist in incident response planning, coordination, execution, and reporting.</li><li>Collaborate with external organizations and agencies to share threat intelligence and enhance DCO capabilities.</li><li>Performs other duties and assignments as required.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Requires an active Top Secret Clearance with SCI.</li><li>Bachelors Degree or equivalent experience preferably in Computer Science or MIS, IS, Engineering or related field.</li><li>This position requires candidates to adhere to DoD 8570.01M. All candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. Baseline Environment (BE) certifications cannot also be used as a Computing Environment (CE) certification. The authorized certifications for this job title are listed as follows: Baseline: Cisco: CCNA: Certified Network Associate Security Cisco: CyberOps Professional Cisco: SCYBER: Cybersecurity Specialist CompTIA: Cloud+ ce CompTIA: CySA+ ce: Cybersecurity Analyst CompTIA: PenTest+ ce CyberSec: CFR: First Responder EC-Council: CEH: Certified Ethical Hacker GIAC: GCIA: Certified Intrusion Analyst GIAC: GCIH: Certified Incident Handler GIAC: GICSP: Industrial Cyber Security Professional Computer Environment (CE): Cisco: CCNP: Certified Network Professional ( Any ) EC Council: ECIH: Certified Incident Handler EC-Council: CHFI: Certified Hacking Forensic Investigator GIAC: GCDA: Certified Detection Analyst ( Preferred ) GIAC: GCFA: Certified Forensic Analyst GIAC: GCIA: Certified Intrusion Analyst GIAC: GCIH: Certified Incident Handler GIAC: GCWN: Certified Windows Security Administrator GIAC: GDAT: Defending Advanced Threats GIAC: GREM: Reverse Engineering Malware GIAC: GSEC: Security Essentials Offensive Security: Certified Expert Offensive Security: Certified Professional</li><li>One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree in a Business Information Systems discipline for three years general experience.</li><li>At least five (5) years of practical experience working with various data (network and system) technologies, with a minimum of two of those years focused on information systems security, cyber threats and SIEM event analysis.</li><li>Experience with a customer service-oriented company.</li><li>Ability to troubleshoot servers and infrastructure equipment.</li><li>Ability to assess networking requirements and provide solutions.</li><li>Ability to make accurate and independent decisions under pressure.</li><li>Ability to perform comfortably in a fast-paced, deadline-oriented work environment.</li><li>Ability to successfully execute many complex tasks simultaneously.</li><li>Visualization of quantitative (numerical) or qualitative information.</li><li>Excellent interpersonal, organizational, written and verbal communication, and briefing skills.</li><li>Excellent analytical and problem-solving skills.</li><li>Threat Intelligence and visualization technologies.</li><li>Security enclave engineering.</li></ul>