Tour operator Jobs

<p><h4>Program summary</h4> <p>KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services facilitate essential aircraft arrivals and departures services for United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers engineering support, NTV leasing, LAMS, power production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</p> <h4>Job summary</h4> <p>The Transient Aircraft Services (TAS) Technician is responsible for the execution of aircraft ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs aircraft arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</p> <p>This position ensures all aircraft servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for maintaining operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</p> <h4>Roles and responsibilities</h4> <ul> <li>Maintain a ZERO Harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE at all times.</li> <li>Perform aircraft marshaling, parking, and positioning in accordance with applicable Technical Orders and airfield procedures.</li> <li>Execute aircraft arrival and departure services, including chocking, grounding, and ensuring safe positioning on the flight line.</li> <li>Conduct aircraft servicing operations, including general ground handling tasks required to support aircraft turn-around and mission readiness.</li> <li>Assist in aircraft launch and recovery operations in coordination with Supervisors and Airfield Management.</li> <li>Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</li> <li>Maintain strict accountability of tools and equipment; ensure compliance with tool control programs at all times.</li> <li>Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</li> <li>Follow all applicable Technical Orders, safety directives, and standard operating procedures during all aircraft servicing operations.</li> <li>Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</li> <li>Identify and report safety hazards, equipment malfunctions, and operational issues to leadership immediately.</li> <li>Support documentation requirements, including aircraft servicing records, shift logs, and inspection checklists.</li> <li>Assist in maintaining cleanliness and organization of the flight line and work areas.</li> <li>Support training and qualification requirements to maintain mission readiness and compliance with certification standards.</li> <li>Perform duties in austere conditions, including extreme weather, while maintaining safety and operational discipline.</li> <li>Perform additional duties and tasks as assigned by the Supervisor or Site Manager.</li> </ul> <h4>Basic qualifications</h4> <ul> <li>Must be a U.S. citizen</li> <li>Ability to obtain and maintain a SECRET clearance</li> <li>Ability to maintain operational continuity across rotations and work within Government-led governance rhythms</li> <li>Minimum 3–5 years of experience in aviation operations, aircraft maintenance, or Transient Aircraft Services</li> <li>Hands-on experience working on a flight line or in aircraft ground operations</li> <li>Basic knowledge of: <ul> <li>Aircraft marshaling and ground handling procedures</li> <li>Flight line safety requirements</li> <li>Use of ground support equipment</li> </ul> </li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Prior experience supporting U.S. Air Force TAS operations</li> <li>FAA Airframe & Powerplant (A&P) certification or equivalent military experience</li> <li>Familiarity with FOD programs, tool control, and flight line safety compliance</li> <li>Experience coordinating with MOC, Airfield Management, and aircraft maintenance teams</li> </ul> <h4>KBR benefits</h4> <p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life</p><p></p>

<p><h4>Program summary</h4> <p>KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services facilitate essential aircraft arrivals and departures services for United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers engineering support, NTV leasing, LAMS, power production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</p> <h4>Job summary</h4> <p>The Transient Aircraft Services (TAS) Technician is responsible for the execution of aircraft ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs aircraft arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</p> <p>This position ensures all aircraft servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for maintaining operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</p> <h4>Roles and responsibilities</h4> <ul> <li>Maintain a ZERO Harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE at all times.</li> <li>Perform aircraft marshaling, parking, and positioning in accordance with applicable Technical Orders and airfield procedures.</li> <li>Execute aircraft arrival and departure services, including chocking, grounding, and ensuring safe positioning on the flight line.</li> <li>Conduct aircraft servicing operations, including general ground handling tasks required to support aircraft turn-around and mission readiness.</li> <li>Assist in aircraft launch and recovery operations in coordination with Supervisors and Airfield Management.</li> <li>Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</li> <li>Maintain strict accountability of tools and equipment; ensure compliance with tool control programs at all times.</li> <li>Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</li> <li>Follow all applicable Technical Orders, safety directives, and standard operating procedures during all aircraft servicing operations.</li> <li>Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</li> <li>Identify and report safety hazards, equipment malfunctions, and operational issues to leadership immediately.</li> <li>Support documentation requirements, including aircraft servicing records, shift logs, and inspection checklists.</li> <li>Assist in maintaining cleanliness and organization of the flight line and work areas.</li> <li>Support training and qualification requirements to maintain mission readiness and compliance with certification standards.</li> <li>Perform duties in austere conditions, including extreme weather, while maintaining safety and operational discipline.</li> <li>Perform additional duties and tasks as assigned by the Supervisor or Site Manager.</li> </ul> <h4>Basic qualifications</h4> <ul> <li>Must be a U.S. citizen</li> <li>Ability to obtain and maintain a SECRET clearance</li> <li>Ability to maintain operational continuity across rotations and work within Government-led governance rhythms</li> <li>Minimum 3–5 years of experience in aviation operations, aircraft maintenance, or Transient Aircraft Services</li> <li>Hands-on experience working on a flight line or in aircraft ground operations</li> <li>Basic knowledge of: <ul> <li>Aircraft marshaling and ground handling procedures</li> <li>Flight line safety requirements</li> <li>Use of ground support equipment</li> </ul> </li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Prior experience supporting U.S. Air Force TAS operations</li> <li>FAA Airframe & Powerplant (A&P) certification or equivalent military experience</li> <li>Familiarity with FOD programs, tool control, and flight line safety compliance</li> <li>Experience coordinating with MOC, Airfield Management, and aircraft maintenance teams</li> </ul> <h4>KBR benefits</h4> <p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance, AD</p><p></p>

<p><h4>Program summary</h4> <p>KBR, through the AFCAP V Program, assists the U.S. Air Force by offering Southwest Asia Transient Aircraft Services (SWA TAS). These services facilitate essential aircraft arrivals and departures services for United States and Coalition Forces. Alongside SWA Transient Aircraft Services, KBR delivers Engineering Support, NTV Leasing, LAMS, Power Production, BOS-I, and a range of quality-of-life solutions that help sustain base operations.</p> <h4>Job summary</h4> <p>The Transient Aircraft Services (TAS) Technician is responsible for the execution of aircraft ground handling and servicing operations at an assigned installation. Reporting directly to the Supervisor, the TAS Technician performs aircraft arrival, marshaling, parking, servicing, turn-around, and departure tasks in support of mission requirements.</p> <p>This position ensures all aircraft servicing activities are conducted safely, efficiently, and in full compliance with the Performance Work Statement (PWS), applicable Technical Orders, airfield safety standards, and U.S. Government/U.S. Air Force directives. The TAS Technician is accountable for maintaining operational readiness, adhering to strict safety protocols, and supporting continuous 24/7/365 flight line operations in a high-tempo, austere environment.</p> <h4>Roles and responsibilities</h4> <ul> <li>Maintain a ZERO Harm workplace by strictly adhering to all flight line safety requirements, including FOD prevention, tool control, and proper use of PPE at all times.</li> <li>Perform aircraft marshaling, parking, and positioning in accordance with applicable Technical Orders and airfield procedures.</li> <li>Execute aircraft arrival and departure services, including chocking, grounding, and ensuring safe positioning on the flight line.</li> <li>Conduct aircraft servicing operations, including general ground handling tasks required to support aircraft turn-around and mission readiness.</li> <li>Assist in aircraft launch and recovery operations in coordination with Supervisors and Airfield Management.</li> <li>Perform operator-level inspections and servicing of assigned equipment, including vehicles and support equipment used in TAS operations.</li> <li>Maintain strict accountability of tools and equipment; ensure compliance with tool control programs at all times.</li> <li>Participate in FOD prevention activities, including routine flight line inspections and immediate removal of foreign objects.</li> <li>Follow all applicable Technical Orders, safety directives, and standard operating procedures during all aircraft servicing operations.</li> <li>Communicate effectively with Supervisors and team members to ensure safe and efficient execution of tasks.</li> <li>Identify and report safety hazards, equipment malfunctions, and operational issues to leadership immediately.</li> <li>Support documentation requirements, including aircraft servicing records, shift logs, and inspection checklists.</li> <li>Assist in maintaining cleanliness and organization of the flight line and work areas.</li> <li>Support training and qualification requirements to maintain mission readiness and compliance with certification standards.</li> <li>Perform duties in austere conditions, including extreme weather, while maintaining safety and operational discipline.</li> <li>Perform additional duties and tasks as assigned by the Supervisor or Site Manager.</li> </ul> <h4>Basic qualifications</h4> <ul> <li>Must be a U.S. citizen</li> <li>Ability to obtain and maintain a SECRET clearance</li> <li>Ability to maintain operational continuity across rotations and work within Government-led governance rhythms</li> <li>Minimum 3–5 years of experience in aviation operations, aircraft maintenance, or Transient Aircraft Services</li> <li>Hands-on experience working on a flight line or in aircraft ground operations</li> <li>Basic knowledge of: <ul> <li>Aircraft marshaling and ground handling procedures</li> <li>Flight line safety requirements</li> <li>Use of ground support equipment</li> </ul> </li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Prior experience supporting U.S. Air Force TAS operations</li> <li>FAA Airframe & Powerplant (A&P) certification or equivalent military experience</li> <li>Familiarity with FOD programs, tool control, and flight line safety compliance</li> <li>Experience coordinating with MOC, Airfield Management, and aircraft maintenance teams</li> </ul> <h4>KBR benefits</h4> <p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance,</p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><strong>Overview</strong> <br> <br> <p> <strong> <span> <span>**This position will be physically located in Kuwait in support of LOGCAP**</span> </span></strong> </p> <p> </p> <p> <span>Under the supervision of the Pest Management Coordinator; a<span>ssures safety practices are followed. Major areas of responsibility include, but are not limited to: residential, commercial, and industrial pest management services, and the safe and efficient operation of industry-particular equipment for LOGCAP V AOR. Must be knowledgeable of laws governing the application of controlled and non-controlled pesticides and herbicides. Coordinates work/inspections with facility managers/occupants. Researches materials, and prepares necessary documents. Responds to emergency service calls during regular hours or after-duty on-call hours. </span> </span> </p> <br> <strong>Responsibilities</strong> <br> <br> <p> <strong> <em> <span> <span>This position description is subject to change at any time as needed to meet the requirements of the program or company.</span> </span></em> </strong> </p> <ul> <li>Assures safety practices are followed</li> <li>Major areas of responsibility include, but are not limited to: residential, commercial, and industrial pest management services, and the safe and efficient operation of industry-particular equipment for LOGCAP V AOR.</li> <li>Must be knowledgeable of laws governing the application of controlled and non-controlled pesticides and herbicides.</li> <li>Coordinates work/inspections with facility managers/occupants.</li> <li>Researches materials, and prepares necessary documents.</li> <li>Responds to emergency service calls during regular hours or after-duty on-call hours.</li> </ul> <br> <strong>Qualifications</strong> <br> <br> <ul> <li> <strong>Minimum Qualifications:</strong> Education/Certifications: One year related experience may be substituted for one year of education, if degree is required.<br> <ul> <li>Must be a U.S. Citizen</li> <li>A valid driver s license and the ability to obtain a U. S. Government Motor Vehicle Operator s License and host nation Driver s License, is required.</li> </ul> </li> <li> <strong>Education:</strong> <ul> <li>High school diploma or equivalent. Must provide a copy of the diploma.</li> </ul> </li> <li> <strong>Experience:</strong> <ul> <li>Minimum of one (1) year experience in the Pest Control field.</li> </ul> </li> <li> <strong>Skills:</strong> <ul> <li>Excellent communication and people skills</li> <li>Able to use computer-automated systems to perform assigned duties.</li> </ul> </li> <li> <strong>Working Conditions:</strong> <ul> <li>Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit.</li> <li>Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months).</li> <li>Includes some industrial production environment conditions as well.</li> </ul> </li> <li> <strong>Physical Requirements:</strong> <ul> <li>Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.</li> <li>Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents.</li> <li>Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices.</li> <li>Must comply with all Fire and Safety Regulations and post policies.</li> </ul> </li> </ul> At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Analyzes deficiencies in equipment and supervises necessary repairs</p> <ul> <li>Inspects equipment and as necessary, conducts repairs or replaces faulty components using a variety of hand tools and equipment</li> <li>Completes mechanical repairs or improvements on a variety of processes, equipment, fixtures, and unit operations</li> <li>Provides technical/operational guidance to ensure compliance with the PWS while delivering desired results</li> <li>Participates in the preventive and corrective maintenance programs</li> <li>Evaluates maintenance requests, sets priorities, and processes work assignments</li> <li>Inspects and tests facility components for proper operation IAW manufacturer s specifications</li> <li>Inspects hydraulic systems for wear, leaks and proper fluid level IAW manufacturer s specifications</li> <li>Working with sheet metal parts; repairs and installs hydraulic, pneumatic parts and systems</li> <li>Changes bearings, sprockets, chains, belts, shafts, cylinders, and other interchangeable components</li> <li>Guides technicians in the performance of basic pipefitting, plumbing, threading, and layout</li> <li>Provides reports on maintenance, safety and quality issues</li> <li>Performs other duties as assigned</li> </ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Minimum Qualifications: Education/Certifications:</strong> One-year related experience may be substituted for one year of education, if degree is required.<br> </p><ul> <li>Must be a U.S. Citizen</li> <li>A valid driver s license and the ability to obtain a U. S. Government Motor Vehicle Operator s License and host nation Driver s License, is required.</li> </ul> <p></p> <p><strong>Education/Certifications:</strong> One-year related experience may be substituted for one year of education, if degree is required.<br> </p><ul> <li>Industry and trade certifications are required</li> <li>Specific training in the operation of hydraulic and pneumatic systems</li> </ul> <p></p> <p><strong>Experience:</strong> </p><ul> <li>4-7 years of mechanical maintenance experience</li> <li>4-5 years of experience planning, laying out, and installing electrical distribution systems</li> <li>Working knowledge of electrical systems including secondary distribution and interior systems</li> <li>Hands-on experience with electrical circuits, power cables, controls, and motors</li> <li>Ability to read blueprints, single-line diagrams, and rough shop drawings</li> <li>Must possess strong knowledge in a skilled trade (electrical, pneumatic, plumbing, etc.)</li> <li>Knowledge of U.S. Army Safety Guidelines and OSHA Standards preferred</li> </ul> <p></p> <p><strong>Skills:</strong> </p><ul> <li>Requires ability to analyze the operation of various infrastructure systems, determine the cause of malfunctions, and take corrective actions as required</li> <li>Strong leadership and analytical skills</li> <li>Effective communication, organizational, interpersonal and people management skills</li> <li>Mastery of engineering skills</li> </ul> <p></p> <p><strong>SUPERVISORY/BUDGET RESPONSIBILITIES:</strong> </p><ul> <li>Will have direct oversight of junior technicians and subcontracted personnel when they are on site</li> </ul> <p></p> <p><strong>Working Conditions:</strong> </p><ul> <li>Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit.</li> <li>Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months).</li> <li>Includes some industrial production environment conditions as well.</li> </ul> <p></p> <p><strong>Physical Requirements:</strong> </p><ul> <li>Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.</li> <li>Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents.</li> <li>Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices.</li> <li>Must comply with all Fire and Safety Regulations and post policies.</li> </ul> <p></p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under supervision of Trade Shop Supervisor and/or Facility Maintenance &amp; Repair Supervisor, Performs routine and emergency maintenance of electronic intrusion alarm systems and equipment, components, and subsystems, to include conductor splicing and terminating on associated systems. Performs major and minor installation and repairs to circuit boards, circuit breakers, transformers, filters, batteries, rectifiers, and associated components and accessories. Performs in secure-, critical-, and sensitive-designed areas under control of the U.S. Army IAW contract requirements.</p><p><b>Responsibilities</b></p><p>This position description is subject to change at any time as needed to meet the requirements of the program or company.</p><p>Provides direction in the accomplishment of the maintenance and repair of systems associated with fire detection, suppression and other equipment that is a component part of the overall fire protection system</p><p>Utilizes test equipment and meters such as voltmeters, ammeters, telephone test sets, smoke detector sensitivity testers, and wire tracing equipment, and others for locating and diagnosing equipment, distribution, and control system malfunctions.</p><p>Utilizes computer software to program fire alarm control panels and perform load calculations for installed systems</p><p>Utilizes various hand tools, shop tools, and equipment in accomplishing repairs and maintenance of these systems and components.</p><p>Troubleshoots and repairs fire protection circuits and equipment. Repairs or replaces defective components.</p><p>Requests and maintains accountability for parts, tools, equipment and materials required for work performance and work assignments.</p><p>May be required to conduct both routine and emergency services after normal work periods.</p><p>Performs the majority of work in the sensitive and secure areas of military installations and facilities in accordance with the established security procedures of the U.S. Army and contract requirements</p><p>Responsible for safe operation, cleanliness and operator maintenance of assigned vehicle.</p><p>Prepares and completes requires work documents.</p><p>Complies with safety/environmental standards and safe work practices</p><p>Acts as Subject Matter Expert for the AOR fire alarm/suppression systems</p><p>Provides recommendations to the US Government for the need for new systems and repairs.</p><p>Performs other duties as assigned</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Minimum Qualifications:</h2><p>Education/Certifications:</p><ul><li>One-year related experience may be substituted for one year of education, if degree is required.</li><li>Must possess a Trade Certification/License in one of the following trades: HVAC, Carpentry, Electrical, Plumbing and/or Mechanical.</li><li>Must possess a current Stateside driver's License unless otherwise stipulated</li><li>Ability to obtain host country driver s license.</li></ul><p>Experience:</p><ul><li>Associate's degree and minimum 5 years experience in one of the required trades. Examples include previous job descriptions, DD214 and Military/Civilian Performance reports, job experience letter on company or corporate letterhead from previous employers.</li></ul><p>Skills:</p><ul><li>Must have the ability to evaluate fire detection/suppression installations to determine corrective action.</li><li>Must have sufficient knowledge of English to understand technical instructions and documents and accomplish work from these documents.</li><li>MIRCOM PRO 2000, VESDA, and Chemetron Suppression Systems factory training desired (or equivalent).</li><li>Excellent organization and communications skills, both written and verbal, are required.</li><li>Must be computer literate in all aspects of Microsoft Office.</li></ul><p>Supervisory Responsibilities:</p><ul><li>Supervises a section of 11 technicians including required reporting and submission of inspection reports and required contract documentation.</li></ul><p>Working Conditions:</p><ul><li>Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit.</li><li>Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, duty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months).</li><li>Includes some industrial production environment conditions as well.</li></ul><p>Physical Requirements:</p><ul><li>Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.</li><li>If the use of arm and/or leg controls requires exertion of forces greater than that for sedentary work and the worker sits most of the time, the job is rated for light work.</li><li>Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents.</li><li>Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices.</li><li>Must comply with all Fire and Safety Regulations and post policies</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br>Supports an Aircraft Ground Equipment (AGE) shop in a medium to large-sized military aircraft flying organization. Ensures the timely and proper performance of scheduled and unscheduled maintenance on AGE equipment and light support vehicles. Inspects, tests, and operates AGE to determine equipment serviceability and proper operation. Diagnoses mechanical and electrical circuitry malfunctions. Interprets drawings, wiring diagrams, schematics, and technical data to facilitate repairs and/or modifications to ground support equipment.<br>Identifies appropriate replacement parts in TOs and technical documents and orders those parts. Removes, disassembles, repairs, cleans, treats for corrosion, assembles, and re-installs AGE accessories and components. Stencils and marks AGE as appropriate. Services equipment with fuel, oil, coolant, water, hydraulic fluid, and air as required. Operates, cleans, inspects, and services AGE tow vehicles. Maintains and documents AGE equipment and tow vehicle forms. Positions equipment to support aircraft maintenance and flying operations. Schedules PMIs as required. Adheres to safety procedures and follows technical orders as applicable.<br>USAF equivalent position is AGE Mechanic Apprentice.<br><b>Essential Responsibilities:</b><br>• Maintains external fuel and grounding systems; performs scheduled and unscheduled maintenance on GSE; inspects, tests, and operates GSE to determine equipment serviceability and proper operation; services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air; diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical publications.<br>• Disassembles and assembles malfunctioning basic GSE accessories and components; removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories; stencils and marks GSE in accordance with technical publications; stores, handles, labels, uses, and disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations.<br>• Prepares GSE for storage and mobility deployment; and operates, cleans, inspects, and services GSE towing vehicles.<br>• Assists in maintaining vehicle records and assists with updating paper and electronic equipment records; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations; practices good housekeeping, tool control, Foreign Object Damage prevention, and safety at all times.<br>• Performs all other duties as assigned or requested.<br>Minimum Requirements<br>• Must have High School Diploma or have completed relevant military and/or vocational technical school curriculum.<br>• Minimum of one-year actual AGE maintenance experience required.<br>• Must be qualified with most basic types and uses of AGE equipment.<br>• Must be familiar with diesel engine maintenance and repair, and HVAC maintenance and repair at the basic level.<br>• Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.<br>• Must be able to inspect, repair, and operate ground support and auxiliary equipment.<br>• Must achieve a passing grade in all required courses/certifications for continued employment, as needed.<br>• Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.<br>• Must be able to Deploy to Forward Locations (other countries) as Directed by the Government<br>• Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.<br>• Must be able to speak, read, write, and understand English.<br>• Must submit updated SF-86 within 30 days of hire start date.<br>• Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.<br>• Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.<br>• Must have current/active State Issued Driver s License.<br>• Must be able to acquire and maintain a valid flight-line Government Driver s License.<br>• Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.<br>• Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.<br><b>Preferred Qualifications</b><br>• Associate degree in a relevant career field.<br>• RPA Deployment experience.<br>• Prior experience as a Defense Contractor.<br>• Vehicle Operator Training.<br>• AGE Mechanic experience within the last 10 years.<br></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Supports an Aircraft Ground Equipment (AGE) shop in a medium to large-sized military aircraft flying organization. Ensures the timely and proper performance of scheduled and unscheduled maintenance on AGE equipment and light support vehicles. Inspects, tests, and operates AGE to determine equipment serviceability and proper operation. Diagnoses mechanical and electrical circuitry malfunctions. Interprets drawings, wiring diagrams, schematics, and technical data to facilitate repairs and/or modifications to ground support equipment. Identifies appropriate replacement parts in TOs and technical documents and orders those parts. Removes, disassembles, repairs, cleans, treats for corrosion, assembles, and re-installs AGE accessories and components. Stencils and marks AGE as appropriate. Services equipment with fuel, oil, coolant, water, hydraulic fluid, and air as required. Operates, cleans, inspects, and services AGE tow vehicles. Maintains and documents AGE equipment and tow vehicle forms. Positions equipment to support aircraft maintenance and flying operations. Schedules PMIs as required. Adheres to safety procedures and follows technical orders as applicable. USAF equivalent position is AGE Mechanic Apprentice. Essential Responsibilities: Maintains external fuel and grounding systems; performs scheduled and unscheduled maintenance on GSE; inspects, tests, and operates GSE to determine equipment serviceability and proper operation; services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air; diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical publications. Disassembles and assembles malfunctioning basic GSE accessories and components; removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories; stencils and marks GSE in accordance with technical publications; stores, handles, labels, uses, and disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations. Prepares GSE for storage and mobility deployment; and operates, cleans, inspects, and services GSE towing vehicles. Assists in maintaining vehicle records and assists with updating paper and electronic equipment records; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations; practices good housekeeping, tool control, Foreign Object Damage prevention, and safety at all times. Performs all other duties as assigned or requested.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must have High School Diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one-year actual AGE maintenance experience required.</li><li>Must be qualified with most basic types and uses of AGE equipment.</li><li>Must be familiar with diesel engine maintenance and repair, and HVAC maintenance and repair at the basic level.</li><li>Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li><li>Must be able to inspect, repair, and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications</p><ul><li>Associate degree in a relevant career field.</li><li>RPA Deployment experience.</li><li>Prior experience as a Defense Contractor.</li><li>Vehicle Operator Training.</li><li>AGE Mechanic experience within the last 10 years.</li></ul><p></p></section>

<p><strong>Job Overview</strong> Weatherford is seeking a skilled and results-driven Field Specialist IV MPD to join our team. This pivotal role is responsible for optimizing MPD and drilling processes, enhancing efficiency, and driving profitability. The ideal candidate will work closely with country and regional team to ensure accurate reporting and compliance. Additionally, this role plays a key part in conducting Operations safely and with minimal interruption to drilling. The job requires occasional package preparation in the Weatherford base where full compliance to Weatherford performance standards is required.</p><p><strong>Responsibilities:</strong> Conducts maintenance of the Managed Pressure Drilling Services equipment at the job site and workshop when required. Responsible for managing all aspects of the field/offshore Directly responsible for the safe delivery of all MPD related services onsite. On call 24hrs while on site. Responsible for daily MPD reporting, hydraulic calculations, simulations and supervises shift personnel. At the discretion of product line management (such as the Engineering Manager, Operations Manager, or their designee) will be responsible for working in the shop. This will include but not limited to green tagging, preparing, and/or assisting with shipping equipment to job site. Rig up, operate and perform troubleshooting of the Managed Pressure Drilling Services equipment at the job site or workshop, ensure all paperwork and HSE requirements are met and complied with Perform green tagging, In Casing Test, or other operational activities required on location or in the shop and all documented procedures for the Managed Pressure Drilling Services equipment on location. Perform all RCD operations and monitoring. Performs field operations of Managed Pressure Drilling Services equipment including operating the MPD Choke from the Operator s Panel Troubleshoot all electrical/electronic components and repair/maintain chokes and other mechanical equipment as necessary. Completes all the necessary reports/paperwork related to Managed Pressure Drilling Services operations. Keeps updated on all inspection requirements for the Managed Pressure Drilling Services equipment on the job site and in the shop. Demonstrate and apply knowledge and understanding of all matters related to the Managed Pressure Drilling Services equipment and accessories. Provides onsite job support to include but not limited to: mechanical, hydraulic functionality, revision changes, compatibility issues, troubleshooting, system versions, of Managed Pressure Drilling Services components. Keep updated on Managed Pressure Drilling Services equipment, mechanical and hydraulic equipment manufacturing or regulatory standards. Know and understand Weatherford Quality Policy and comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Workplace Instructions Comply with Weatherford and client Quality, Health, Security and Environment (QHSE) procedures and documentation on site for specific shift. Document all jobs and incidents in the Weatherford Performance Tracking System (WPTS). Participate in the Permit to Work process. Actively participate in ToolBox talks. Must understand and comply with all safety rules and company policies of Weatherford Required to complete the competency and training requirements identified by Global and Regional Management. Complete training in order to meet the minimum HSE certification and technical requirements required perform their jobs Perform all duties regarding Managed Pressure Drilling Services and Weatherford assigned by management or supervisors within the physical demand of the job description.</p><p><strong>Skills</strong> Mechanical ability necessary to perform repairs Excellent Microsoft Outlook, Word and Excel computer skills Self-motivator, self-starter Good oral and written communication skills Must be able to follow instructions Able to work closely with fellow employees Customer focused. General understanding of products and their application. Individual must be adaptive to change, have multi-tasking ability. Ability to work in a team environment. Ability to work in high and cold temperature environment Should be able to work closely with all levels of personnel and outside contractors.</p><p><strong>Desired Candidate Profile</strong></p><p><strong>Qualifications:</strong> +5 years related to MPD field experience Bachelor's degree Strong MPD knowledge #LI-MD1</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Junior IT Support Company: Oryx Ltd.<br> Employment: Full-time, Permanent Reports to: Managing Partner Department: ICT Location: Kuwait City, Kuwait About Us Oryx Ltd.<br> has a global investment mandate spanning private equity, venture capital, public markets, real estate, and alternative investments.<br> The group’s primary focus is the USA and the GCC, with additional exposure across the UK, Europe, and select global markets.<br> It operates through specialist subsidiaries and takes a principal-led, long-term approach to building and managing assets.<br> The Role Reporting to the Managing Partner and working day to day with the IT Manager, the Junior IT Support owns hands-on device support and onboarding/offboarding logistics across the Oryx organization.<br> You prepare and configure laptops, phones, IT accounts, and application access for new joiners — including urgent, on-the-spot cases — and provide day-to-day hardware and software support across Windows, Apple, and Android devices.<br> This is a permanent role created to remove a recurring operational bottleneck: it frees senior IT to stay focused on infrastructure, governance, automation, and AI work.<br> It is an excellent fit for a capable, self-driven fresh graduate or intern-level candidate who wants real ownership from day one and a structured path into systems administration.<br> Success looks like new joiners fully set up on day one — device, accounts, and access ready; urgent requests handled calmly on the spot; accurate device and stock records; and senior IT rarely interrupted for device-level work.<br> Key Responsibilities Device Setup &amp; Support • Set up and configure Windows OS and business applications for staff across the group • Support Apple (macOS/iOS) and Android devices — configuration, updates, and troubleshooting • Provide hardware support and troubleshooting for laptops, desktops, phones, and peripherals Onboarding &amp; Offboarding • Prepare laptops, phones, IT accounts, application access, and device configurations for new joiners — including urgent hiring cases • Execute onboarding and offboarding setups end to end, including urgent/on-the-spot cases • Coordinate with HR on new joiner and leaver timelines IT Supplies, Procurement &amp; Stock • Coordinate with the IT Manager on IT supplies, PRs/POs, documents, and stock • Maintain accurate records of devices, accounts, and IT stock and asset inventory Reporting &amp; Escalation • Escalate complex infrastructure or access issues to the IT Manager and document resolutions • Track assigned work and report status on Asana • Carry out any other tasks as required by management What We Offer • Real ownership from day one — you run device support and onboarding across the group • Structured training into Active Directory, Azure / Microsoft 365, and SharePoint administration • A modern tool stack and genuine appetite for automation and AI • Competitive compensation commensurate with experience • A role that grows with you — this is a foundation, not a ceiling How to Apply Complete the application form at https://airtable.<br>com/appwm2VUujXVQ2mIB/shrBmmYJs7pftZ2kJ.<br> Select “Junior IT Support” as the job position and reference code.<br> Alternatively, email your CV directly to hr@oryx1.<br>com with the subject line “Junior IT Support”.<br> Only shortlisted candidates will be contacted.<br> We appreciate all applications.<br> Attitude and curiosity are weighted above degree pedigree.<br> Essential • Education: Bachelor’s degree in Information Technology, Computer Science, or Computer Engineering — fresh graduates and intern-level candidates welcome • Device skills: Confident hands-on setup of Windows, macOS, and Android devices • Troubleshooting: Hardware troubleshooting with a methodical, reasoned approach — able to explain why a fix works, not just what to click • Independence: A self-sufficient, independent operator who owns a task end to end — be ready to give concrete examples • Learning: A natural proclivity to learn and visible curiosity — evidence such as a home lab, self-pursued certifications, or side projects • English: Strong written and verbal English We Will Train You On — growth areas, not filters • Active Directory, DNS, DHCP • Azure / Microsoft 365 administration • Basic integrations and SharePoint administration Preferred — aptitude matters more than credentials • AI tools familiarity is a strong plus — ChatGPT, Claude, or similar • Entry-level certifications such as CompTIA A+ or Microsoft fundamentals • Arabic language skills — working knowledge for end-user support</span> </div>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Supports an aircraft ground equipment (AGE) shop in a medium to large-sized military aircraft flying organization. Ensures the timely and proper performance of scheduled and unscheduled maintenance on AGE equipment and light support vehicles. Inspects, tests, and operates AGE to determine equipment serviceability and proper operation. Diagnoses mechanical and electrical circuitry malfunctions. Interprets drawings, wiring diagrams, schematics, and technical data to facilitate repairs and/or modifications to ground support equipment.</p> <p>Identifies appropriate replacement parts in TOs and technical documents and orders those parts. Removes, disassembles, repairs, cleans, treats for corrosion, assembles, and re-installs AGE accessories and components. Stencils and marks AGE as appropriate. Services equipment with fuel, oil, coolant, water, hydraulic fluid, and air as required. Operates, cleans, inspects, and services AGE tow vehicles. Maintains and documents AGE equipment and tow vehicle forms. Positions equipment to support aircraft maintenance and flying operations. Schedules PMIs as required. Adheres to safety procedures and follows technical orders as applicable.</p> <p>USAF equivalent position is AGE Mechanic Apprentice.</p> <h4>Essential responsibilities</h4> <ul> <li>Maintains external fuel and grounding systems; performs scheduled and unscheduled maintenance on GSE; inspects, tests, and operates GSE to determine equipment serviceability and proper operation; services equipment with fuel, oil, water, coolant, hydraulic fluid, refrigerant, and compressed air; diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical publications.</li> <li>Disassembles and assembles malfunctioning basic GSE accessories and components; removes, disassembles repairs, cleans, treats for corrosion, assembles, and reinstalls GSE components and accessories; stencils and marks GSE in accordance with technical publications; stores, handles, labels, uses, and disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations.</li> <li>Prepares GSE for storage and mobility deployment; and operates, cleans, inspects, and services GSE towing vehicles.</li> <li>Assists in maintaining vehicle records and assists with updating paper and electronic equipment records; provides dispatch service for GSE, including positioning equipment to support aircraft maintenance and flying operations; practices good housekeeping, tool control, foreign object damage prevention, and safety at all times.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one-year actual AGE maintenance experience required.</li> <li>Must be qualified with most basic types and uses of AGE equipment.</li> <li>Must be familiar with diesel engine maintenance and repair, and HVAC maintenance and repair at the basic level.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect, repair, and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Vehicle operator training.</li> <li>AGE mechanic experience within the last 10 years.</li> </ul></p><p></p>

<p>The Non-Destruction Inspection Technician (NDI) II inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis. Determine test method and prepare fluids and parts for nondestructive inspection. Interpret nondestructive inspection test results and provide information about defects to repair center. Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action. Establish radiation areas for radiographic operations. Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data. Perform nondestructive inspection on structures, components, and systems. Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrate testing, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment. Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors. Operate, maintain, and inspect nondestructive equipment. Perform operator maintenance and service inspections on shop equipment and tools. Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment. Perform silver recovery functions. Handle and dispose of hazardous waste and materials. Perform other qualified duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent required. U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Completion of a initial Non Destructive Inspection Level II training Course and current basic qualification.</li><li>Three (3) or more years experience as an aviation inspector and a minimum of one year experience on the assigned(MDS) airframe . (UH60, AH64, CH47 )</li><li>Shall be trained and qualified per NAS 410 or ASNT-CP-189 to the level assigned.</li><li>Must be in possession of a U.S. Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</li><li>Must be a US Citizen.</li><li>Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust. ** US Citizenship is required to obtain a T1/CAC NACI Clearance.</li><li>Able to clear CENTCOM Medical requirements for deployment.</li><li>Ability to obtain and maintain Kuwait Visa</li><li>Previous experience in the maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components (UH60, AH64, CH47).</li><li>Have the skills and knowledge to set up and standardize equipment, conduct tests, interpret and evaluate for acceptance or rejection, and document.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and Level I personnel in the technique/method in which they are certified.</li><li>Familiar with the codes, standards, and other contractual documents that control the method as utilized by the employer.</li><li>Capable of developing written instructions from approved general procedures. Such instructions shall require final approval by a Level III.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul>

<p>The Non-Destruction Inspection Technician (NDI) II inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p><p>Determine test method and prepare fluids and parts for nondestructive inspection.</p><p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p><p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p><p>Establish radiation areas for radiographic operations.</p><p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p><p>Perform nondestructive inspection on structures, components, and systems.</p><p>Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrate testing, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p><p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p><p>Operate, maintain, and inspect nondestructive equipment.</p><p>Perform operator maintenance and service inspections on shop equipment and tools.</p><p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p><p>Perform silver recovery functions.</p><p>Handle and dispose of hazardous waste and materials.</p><p>Perform other qualified duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent required.</li><li>U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Completion of a initial Non Destructive Inspection Level II training Course and current basic qualification.</li><li>Three (3) or more years experience as an aviation inspector and a minimum of one year experience on the assigned(MDS) airframe . (UH60, AH64, CH47 )</li><li>Shall be trained and qualified per NAS 410 or ASNT-CP-189 to the level assigned.</li><li>Must be in possession of a U.S. Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</li><li>Must be a US Citizen.</li><li>Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust. ** US Citizenship is required to obtain a T1/CAC NACI Clearance.</li><li>Able to clear CENTCOM Medical requirements for deployment.</li><li>Ability to obtain and maintain Kuwait Visa</li><li>Previous experience in the maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components (UH60, AH64, CH47).</li><li>Have the skills and knowledge to set up and standardize equipment, conduct tests, interpret and evaluate for acceptance or rejection, and document.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and Level I personnel in the technique/method in which they are certified.</li><li>Familiar with the codes, standards, and other contractual documents that control the method as utilized by the employer.</li><li>Capable of developing written instructions from approved general procedures. Such instructions shall require final approval by a Level III.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul>

<div><span style="font-size: 11px;"><b>ABOUT THE JOB</b></span></div><div><span style="font-size: 11px;">We are seeking an ambitious, hands-on Mission Operations Specialist to lead the deployment, user training, and day-to-day operational success of our Connected Warfare products in Kuwait.</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">Based out of our UAE office, you will be the primary technical and operational bridge to our Kuwaiti defense and national security customers. This is not a desk job. You will be on the ground in Kuwait up to 50% of the time, working directly with end-users, setting up tactical mesh networks, integrating sensors, and ensuring our command and control (C2) software performs flawlessly in the field.&nbsp;</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;">This is an execution-focused role designed for a highly capable, technically minded professional ready to take immense ownership of a key GCC defense account.</span></div><div><span style="font-size: 11px;"><br></span></div><div><span style="font-size: 11px;"><b>Key Responsibilities:</b></span></div><div><span style="font-size: 11px;">Orchestrate Tactical Deployments: Lead the physical deployment and configuration of our Connected Warfare hardware, software, and sensor networks in support of Kuwaiti customer missions.</span></div><div><span style="font-size: 11px;">Train the Operator: Design and deliver hands-on training to military, security, and tactical operators, ensuring they are fully capable of utilizing our mesh networks and C2 systems.</span></div><div><span style="font-size: 11px;">Bridge the Gap to Engineering: Work side-by-side with users in the field to understand their specific workflow challenges, translating real-world operational requirements back to our engineering teams in the UAE and globally.</span></div><div><span style="font-size: 11px;">Drive Local Account Success: Build trust-based relationships with mid-level officers and technical stakeholders in Kuwait to ensure high system adoption and uncover future mission needs.</span></div><div><span style="font-size: 11px;">Cross-Functional Execution: Coordinate with UAE-based logistics, legal, and engineering teams to ensure deployments in Kuwait are executed seamlessly and meet strict timelines.</span></div><div><span style="font-size: 11px;">WHAT WE’RE LOOKING FOR</span></div><div><span style="font-size: 11px;">Mission-First Mindset: You put the needs of the customer and the mission first. You are motivated by the opportunity to radically evolve national and international defense capabilities.</span></div><div><span style="font-size: 11px;">Extreme Ownership: We look for owners. You will be entrusted with high levels of responsibility in Kuwait. You must be comfortable stepping up, solving vague technical problems, and driving tasks to completion on the ground without constant supervision.</span></div><div><span style="font-size: 11px;">Technical &amp; Tactical Aptitude: We are first and foremost a deep-tech company working with machine learning, distributed networking, and sensor fusion. You must have a strong desire to understand how complex hardware/software systems operate and be comfortable troubleshooting them in high-pressure field environments.</span></div><div><span style="font-size: 11px;">Collaboration &amp; Adaptability: You thrive in unstructured environments and enjoy working as part of a flat, low-ego, fast-moving team that values teamwork over hierarchy.</span></div><div><span style="font-size: 11px;">WHAT YOU’LL DO:</span></div><div><span style="font-size: 11px;">Serve in a customer-facing capacity, working directly with Kuwaiti defense/security entities to deploy Connected Warfare products.</span></div><div><span style="font-size: 11px;">Own the delivery of operational contracts, including system setups, performance monitoring, and creating user engagement roadmaps.</span></div><div><span style="font-size: 11px;">Design and implement user feedback loops to gather, triage, and prioritize requirements and software bugs found during field use or training exercises.</span></div><div><span style="font-size: 11px;">Provide direct input to product development teams to drive features that enhance user workflows and operational efficiency.</span></div><div><span style="font-size: 11px;">Travel frequently between the UAE and Kuwait (up to 50% travel) to support active operations, field testing, and training events.</span></div><div><span style="font-size: 11px;"><b>REQUIRED QUALIFICATIONS:</b></span></div><div><span style="font-size: 11px;">Prior experience in field operations, technical deployment, defense technology, tactical communications, systems integration, or technical customer success roles.</span></div><div><span style="font-size: 11px;">Strong technical aptitude with a proven ability to troubleshoot hardware, software, and basic IP networking/RF communications in the field.</span></div><div><span style="font-size: 11px;">Outstanding interpersonal and communication skills, with the ability to build rapport with tactical operators and technical teams.</span></div><div><span style="font-size: 11px;">Excellent written and spoken English.</span></div><div><span style="font-size: 11px;">Based in the UAE (or willing to relocate) with a passport/visa status that allows for rapid, seamless travel to Kuwait.</span></div><div><span style="font-size: 11px;">Ability to obtain and maintain necessary local security clearances required for Kuwaiti military and government installations.</span></div><div><span style="font-size: 11px;"><b>PREFERRED QUALIFICATIONS:</b></span></div><div><span style="font-size: 11px;">Academic background in Engineering, Computer Science, Information Technology, or a related technical field.</span></div><div><span style="font-size: 11px;">Prior experience or familiarity with military operations, C2 (Command &amp; Control) systems, intelligence workflows, or unmanned systems.</span></div><div><span style="font-size: 11px;">Experience configuring or troubleshooting tactical networks, sensors, or edge-computing devices.</span></div><p><strong>Desired Candidate Profile</strong></p><ul><li>Prior experience in field operations, technical deployment, defense technology, tactical communications, systems integration, or technical customer success roles.</li><li>Strong technical aptitude with a proven ability to troubleshoot hardware, software, and basic IP networking/RF communications in the field.</li><li>Outstanding interpersonal and communication skills, with the ability to build rapport with tactical operators and technical teams.</li><li>Excellent written and spoken English.</li><li>Based in the UAE (or willing to relocate) with a passport/visa status that allows for rapid, seamless travel to Kuwait.</li><li>Ability to obtain and maintain necessary local security clearances required for Kuwaiti military and government installations.</li><li>Academic background in Engineering, Computer Science, Information Technology, or a related technical field.</li><li>Prior experience or familiarity with military operations, C2 (Command &amp; Control) systems, intelligence workflows, or unmanned systems.</li><li>Experience configuring or troubleshooting tactical networks, sensors, or edge-computing devices.</li></ul>

<strong>Overview</strong> <br> <br> <p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p> <br> <strong>Responsibilities</strong> <br> <br> <p>The Maintenance Controller for the Kuwait KC-130J Program at Al Mubarak airfield in Kuwait has is responsible for assisting the Maintenance Manager in daily operation and management and administration of the aircraft maintenance program, maintenance personnel, and maintenance actions required to support the customer s missions and flight schedules. The Maintenance Controller assigns priorities and directs maintenance personnel to correct discrepancies, generate work orders, track and comply with all inspection requirements, compile and record maintenance data applicable to the Maintenance Information System (MIS), provide the ability to compare records and reports on consumption of material, quality control, and other aspects of production.</p> <p> </p> <p> <strong>Description:</strong> </p> <ul> <li>Act as point of contact for all aircraft discrepancies that may affect daily operations and mission success.</li> <li>Direct and coordinate all scheduled and unscheduled maintenance actions and workload planning</li> <li>Attend meetings with the customer and provide information, reports, and official correspondence regarding aircraft status, mission capability, and maintenance planning information.</li> <li>Coordinate with the Maintenance Manager and customer representatives in the management of scheduled and unscheduled maintenance to ensure the most efficient use of time and resources.</li> <li>Analyze maintenance data to identify trends and initiate corrective actions as necessary.</li> <li>Manage completion of maintenance actions and ensure the complete and accurate entry of data into the Maintenance Information System (MIS).</li> <li>Coordinate with adjacent contractors and supporting agencies to acquire necessary tools, parts, support, materials, and equipment to prevent maintenance stoppages.</li> <li>Ensure accuracy of documentation, (i.e., aircraft, engine, propeller, logbooks, weight and balance records, and MIS) and adherence to technical publications, policies, procedures, and safe maintenance practices.</li> <li>Prepares and sends required reports and attend staff / customer meetings as required.</li> <li>Coordinate troubleshooting efforts on complex maintenance discrepancies, making recommendations for courses of action based on aircraft service history analysis, applicable Maintenance Manual guidance, and operator experience.</li> <li>Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts.</li> <li>Monitor and track all life limited components, periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by the Periodic Maintenance Requirements Manual, Maintenance Requirement Cards (MRC)s, manufacturer s specifications, and all applicable directives, orders, and instructions.</li> <li>Coordinate with operations personnel and aircrew members to ensure the flight schedule is adequately supported and missions are able to be conducted within prescribed timelines.</li> <li>Conduct off-station maintenance when required.</li> <li>Assist in the conduct of maintenance on the flight line and back shops as required to ensure aircraft are available to support the flight schedule.</li> <li>When necessary, perform other duties and functions critical to the support of the program.<br> </li> </ul> <br> <strong>Qualifications</strong> <br> <br> <p> <strong>Education / Certifications:</strong> </p> <ul> <li>High School Diploma</li> </ul> <p>Must be able to obtain/maintain the following required certifications/qualifications:</p> <ul> <li> <p>This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance.</p> </li> <li>Aircraft Weight &amp; Balance certification</li> <li>Safe for Flight certification</li> <li>Aviation Gas Free Engineering (AVGFE) certification</li> <li>Hydraulic Contamination certification</li> <li> I Level &amp; O Level Tire &amp; Wheel certification</li> <li> I Level MLG Brake repair / rebuilding qualification</li> <li>Auxiliary Power Unit (APU) run qualification</li> <li>Applicable Support Equipment licensing</li> <li>Collateral Duty Inspector (CDI) qualification</li> <li>Collateral Duty Quality Assurance Representative (CDQAR) qualification</li> <li>Corrosion Prevention and Control and Aircraft Paint qualification</li> <li>Confined Space Entry certification</li> </ul> <p> <strong>Experience:</strong> </p> <p> Eight years aircraft maintenance experience with five years experience working on C-130J aircraft preferred.<br> Naval Aviation Maintenance Program (NAMP) 4790.2 or equivalent experience with Air Force Instruction 21-101 preferred.<br> Safe for Flight experience and certification specific to C-130J aircraft preferred.<br> Must have a working knowledge of first aid procedures to be used in an emergency.<br> Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures).</p> <p> </p> <p> <strong>Specific Requirements:</strong> </p> <ul> <li>Must be United States (U.S.) citizen, be able to read, write, and understand the English language</li> <li>Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration.</li> <li>Must have a valid U.S. Driver s License.</li> <li>Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements.</li> <li>Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc ) as required by local policies.</li> <li>Must be willing and able to comply with all program functional requirements to include but not limited to: The performance of I Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp;&nbsp;</li></ul> <p> </p> <p> </p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><strong>Overview</strong> <br> <br> <p> <strong> <span> <span>**This position will be physically located in Kuwait in support of LOGCAP**</span> </span></strong> </p> <p> </p> <p>Under the supervision of the Material Maintenance Manager &amp; Technical Inspector Lead, performs initial, in-progress and final inspections on various types of military, commercial, and other forms of Automotive equipment. Makes proper classification determinations as it pertains to U.S. Government property. Assists Shops as needed with Troubleshooting processes. Uses proper Test Measurement and Diagnostics Equipment (TMDE) in the daily operations phase. Conducts Actual Cost of Damages (ACOD), Estimated Cost of Damages (ECOD), and Estimated Cost of Repairs (ECOR). Conduct Tests on Serviced, Repaired and Overhauled equipment to ensure operating efficiency before returning to customer. Understands the automotive repair shop equipment and functions in order to provide assistance and coverage whenever needed. Perform technical research and ensure operational readiness of assigned equipment.</p> <br> <strong>Responsibilities</strong> <br> <br> <p> <strong> <em> <span> <span>This position description is subject to change at any time as needed to meet the requirements of the program or company.</span> </span></em> </strong> </p> <ul> <li>Perform initial, in-progress, classification and final inspections.</li> <li>Utilize Global Combat Support System-Army (GCSS-A), DOD CAC access required.</li> <li>Operate and inspect equipment to diagnose and troubleshoot defects.</li> <li>Use technical manuals, bulletins and written directives in the performance of all inspections.</li> <li>Examine parts for damage or excessive wear using micrometers and gauges.</li> <li>Order required repair parts using appropriate military or COTS technical manuals.</li> <li>Perform battlefield damage assessment and repair (BDAR).</li> <li>Classifies equipment for disposal IAW Army regulations and verify equipment condition codes.</li> <li>Perform testing and certification of equipment and material during Load Testing Process.</li> <li>Perform PDQR process when receiving improper or damaged repair parts.</li> <li>Perform load testing of various equipment IAW applicable technical reference.</li> <li>Performs other duties as assigned.</li> <li>Suggests improvements to processes and have the capability of writing or rewriting process improvements as needed.</li> </ul> <br> <strong>Qualifications</strong> <br> <br> <ul> <li> <strong>MINIMUM QUALIFICATIONS:</strong> <ul> <li>Education/Certifications: One year related experience may be substituted for one year of education, if degree is required.</li> <li>High School Graduate or equivalent.</li> <li>Requires civilian trade qualification or US Army/Air Force/USMC Wheel Mechanic or equivalent (DD214 required).</li> <li>A valid US Driver s License and the ability to obtain a U.S. Government Motor Vehicle Operator s License and Kuwait Driver s License are required.</li> </ul> </li> <li> <strong>Experience</strong>:<ul> <li>A minimum of Five (5) years experience in Automotive Repair, Shop operations or equivalent combination of education and experience is required.</li> <li>A minimum of two (2) years experience as a Technical Inspector is required.</li> </ul> </li> <li> <strong>Skills</strong>:<ul> <li>Must possess the technical skills to identify different repair requirements as it pertains to Automotive Equipment.</li> <li>Must have expert knowledge of Technical and Commercial manuals for Servicing, Operational and Repair so that the correct procedures are used on the proper equipment.</li> <li>Must be an expert in Corrective Actions performed by the Maintenance Teams and only ensure that equipment is FMC when cleared by the shops</li> <li>Must have full knowledge of TMDE and its proper usage.</li> <li>Must be proficient in how the repair parts system works and what to do when it doesn t work correctly.</li> <li>Must be proficient in all phases of the paperwork that pertains to the Services, maintenance, repairs, classification and etc.</li> <li>Must have expert knowledge of the maintenance prints so as to be able to establish workload priority.</li> <li>Must have expert knowledge of Load Test procedures and processes.</li> <li>Must have expert knowledge of equipment operations as it is critical to working as a master driver for that shop.</li> <li>Ability to inspect check and test all types of automotive equipment.</li> <li>Must have a working knowledge of the Army Corrosion Prevention program.</li> <li>Must be Knowledgeable of the Army Maintenance Management Systems (TAMMS)</li> </ul> </li> <li> <strong>Physical Requirements</strong> <ul> <li>Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.</li> </ul> </li> <li> <strong>Working Conditions</strong> <ul> <li>The worker is subject to extreme cold. Temperatures typically below 32 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity.</li> <li>The worker is subject to extreme heat. Temperatures above 100 degrees for periods of more than one hour. Consideration should be given to the effect of other environmental conditions, such as wind and humidity.</li> <li>The worker is subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.</li> <li>The worker is subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals.</li> </ul> </li> </ul> At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</div></section>

<p><h4>Job Description</h4> <p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Conduct the training and examination on all NDT methods to certify and to re-certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.</p> <p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p> <p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p> <p>Establish radiation areas for radiographic operations.</p> <p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p> <p>Perform nondestructive inspection on structures, components, and systems.</p> <p>Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p> <p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p> <p>Operate, maintain, and inspect nondestructive equipment.</p> <p>Perform operator maintenance and service inspections on shop equipment and tools.</p> <p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p> <p>Perform silver recovery functions.</p> <p>Handle and dispose of hazardous waste and materials.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum Requirements:</h4> <ul> <li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li> <li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li> <li>Three (3) years’ experience as a Non Destructive Inspection (NDI).</li> <li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/DIDC Training).</li> <li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li> </ul> <h4>Security Clearance Requirements:</h4> <ul> <li>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance.</li> <li>Must be able to obtain and maintain facility credentials/authorization.</li> <li>US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li> </ul> <h4>Additional and Preferred Qualifications:</h4> <ul> <li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li> <li>Capable of assuming technical responsibility for the NDT facility and staff.</li> <li>Capable of selecting the method and technique for a specific inspection.</li> <li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li> <li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li> <li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical Requirements/Working Environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Conduct the training and examination on all NDT methods to certify and to re-certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.</p> <p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p> <p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p> <p>Establish radiation areas for radiographic operations.</p> <p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p> <p>Perform nondestructive inspection on structures, components, and systems.</p> <p>Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p> <p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p> <p>Operate, maintain, and inspect nondestructive equipment.</p> <p>Perform operator maintenance and service inspections on shop equipment and tools.</p> <p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p> <p>Perform silver recovery functions.</p> <p>Handle and dispose of hazardous waste and materials.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum requirements</h4> <p>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</p> <p>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</p> <p>Three (3) years’ experience as a Non Destructive Inspection (NDI).</p> <p>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/DIDC Training).</p> <h4>Security clearance requirements</h4> <p>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a clearance and for facility credentials/authorization to work at this facility.</p> <h4>Additional and preferred qualifications</h4> <ul> <li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li> <li>Capable of assuming technical responsibility for the NDT facility and staff.</li> <li>Capable of selecting the method and technique for a specific inspection.</li> <li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li> <li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li> <li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis. Conduct the training and examination on all NDT methods to certify and to re- certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189. Determine test method and prepare fluids and parts for nondestructive inspection. Interpret nondestructive inspection test results and provide information about defects to repair center. Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action. Establish radiation areas for radiographic operations. Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data. Perform nondestructive inspection on structures, components, and systems. Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment. Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors. Operate, maintain, and inspect nondestructive equipment. Perform operator maintenance and service inspections on shop equipment and tools. Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment. Perform silver recovery functions. Handle and dispose of hazardous waste and materials Perform other qualified duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li><li>Three (3) years experience as a Non Destructive Inspection (NDI).</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li><li>Capable of assuming technical responsibility for the NDT facility and staff.</li><li>Capable of selecting the method and technique for a specific inspection.</li><li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li><li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li><li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p><p>• Conduct the training and examination on all NDT methods to certify and to re- certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p><p>• Determine test method and prepare fluids and parts for nondestructive inspection.</p><p>• Interpret nondestructive inspection test results and provide information about defects to repair center.</p><p>• Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p><p>• Establish radiation areas for radiographic operations.</p><p>• Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p><p>• Perform nondestructive inspection on structures, components, and systems.</p><p>• Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p><p>• Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p><p>• Operate, maintain, and inspect nondestructive equipment.</p><p>• Perform operator maintenance and service inspections on shop equipment and tools.</p><p>• Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p><p>• Perform silver recovery functions.</p><p>• Handle and dispose of hazardous waste and materials</p><p>• Perform other qualified duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li><li>Three (3) years experience as a Non Destructive Inspection (NDI).</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li><li>Capable of assuming technical responsibility for the NDT facility and staff.</li><li>Capable of selecting the method and technique for a specific inspection.</li><li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li><li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li><li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul><p></p></section>