Ship Mechanic Jobs

<p>An auto mechanic technician inspects, maintains, and repairs cars, trucks, and other vehicles.</p><p>Their core duties involve using computerized diagnostic tools to find mechanical or electrical problems, performing routine tune-ups or oil changes, and replacing worn-out or broken parts to keep vehicles safe and efficient on the road.</p><p>&nbsp;</p><p><strong>Job Summary</strong></p><p>An automotive service technician ensures vehicle safety and performance by identifying malfunctions, executing precise repairs, and communicating repair needs clearly to customers or service advisors</p><p>&nbsp;</p><p><strong>Key Responsibilities</strong></p><p>• Diagnostics: Use electronic scanners and diagnostic equipment to read error codes and pinpoint engine, transmission, or electrical issues.</p><p>• Routine Maintenance: Change motor oil, rotate tires, check fluid levels, replace brake pads, and service batteries.</p><p>• Repairs &amp; Replacements: Fix or swap out defective parts like alternators, sensors, belts, and suspension components.</p><p>• Testing: Test drive vehicles or use specialized shop equipment to verify that systems operate properly after service.</p><p>• Documentation: Record all completed services, parts utilized, and labor hours accurately<br>&nbsp;</p><p ><span lang="ar" dir="rtl">يتولى <strong>فني ميكانيكا السيارات</strong> مهام فحص وصيانة وإصلاح السيارات والشاحنات والمركبات الأخرى.</span></p><p ><span lang="ar" dir="rtl">وتتمثل مهامه الأساسية في استخدام أدوات التشخيص المحوسبة للكشف عن الأعطال الميكانيكية أو الكهربائية، وإجراء عمليات الضبط الدوري أو تغيير الزيت، واستبدال الأجزاء التالفة أو المكسورة لضمان سلامة المركبات وكفاءة أدائها على الطريق.</span></p><h3 ><span lang="ar" dir="rtl">مهام الوظيفة</span></h3><p ><span lang="ar" dir="rtl">يعمل <strong>فني خدمة السيارات</strong> على ضمان سلامة المركبات وكفاءة أدائها من خلال تحديد الأعطال، وإجراء الإصلاحات الدقيقة، وتوضيح احتياجات الإصلاح للعملاء أو مستشاري الخدمة.</span></p><h3 ><span lang="ar" dir="rtl">المسؤوليات الرئيسية</span></h3><ul><li><p ><span lang="ar" dir="rtl"><strong>التشخيص:</strong> استخدام أجهزة المسح الإلكتروني ومعدات التشخيص لقراءة رموز الخطأ وتحديد المشكلات المتعلقة بالمحرك أو ناقل الحركة أو الأنظمة الكهربائية بدقة.</span></p></li><li><p ><span lang="ar" dir="rtl"><strong>الصيانة الدورية:</strong> تغيير زيت المحرك، وتبديل أماكن الإطارات (تدويرها)، وفحص مستويات السوائل، واستبدال وسادات المكابح، وصيانة البطاريات.</span></p></li><li><p ><span lang="ar" dir="rtl"><strong>الإصلاح والاستبدال:</strong> إصلاح أو استبدال الأجزاء المعطلة مثل المولدات (الدينامو)، والمستشعرات، والأحزمة، ومكونات نظام التعليق.</span></p></li><li><p ><span lang="ar" dir="rtl"><strong>الاختبار:</strong> قيادة المركبات تجريبياً أو استخدام معدات الورشة المتخصصة للتحقق من عمل الأنظمة بشكل سليم بعد إجراء الخدمة.</span></p></li><li><p ><span lang="ar" dir="rtl"><strong>التوثيق:</strong> تسجيل كافة الخدمات المنجزة، وقطع الغيار المستخدمة، وساعات العمل بدقة.</span></p></li></ul>

Mechanic <br><br> Job Id :100193605<br><br>Hire Resume Writers<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>Mechanic<br><br>We are looking for an experienced Mechanic with Strong knowledge of truck maintenance and repairs specializing in Mercedes and TATA trucks.<br><br>Interested candidates are requested to send their CV to: umc@umckuwait.com<br><br>Basic Details<br><br>Location : Kuwait City , Kuwait<br><br>Qualification<br><br>Posted : 1 month ago<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : Not-Mentioned<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : umc@umckuwait.com

Mechanic <br><br> Job Id :100195404<br><br>Jobboard subscription<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>URGENT REQUIREMENT FOR MECHANIC (DIESEL AND PETROL)<br><br>Inspect and repair engine, transmission, brake, suspension, steering, and cooling systems. Experience with heavy vehicles, trucks, buses, generators, or construction equipment is preferred Ability to diagnose mechanical, electrical, and hydraulic problems. Full Time Job Transferrable Visa ( Ahli Visa)<br><br>Experienced candidates pls send your CVs to hr@globalintl.com<br><br>Basic Details<br><br>Location : Ahmadi , Kuwait<br><br>Qualification<br><br>Posted : Today<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Jobboard subscription<br><br>Contact Info<br><br>Mobile : +965 98001878<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : Not-Mentioned

<p>Open Positions: Shop Drawings &amp; Quantity Surveying Foreman / Supervisor, Plaster Mason (Manual &amp; Machine), Ceramic &amp; Stone Tiler, Painter, Gypsum Board Technician, Stone Mechanical Fixer.</p><p><strong>Desired Candidate Profile</strong></p><p>Physically fit, hardworking, and team-oriented Draftsman &amp; Foreman candidates will be interviewed via Zoom or Google Meet.</p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will supervise, perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply advanced technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Craftsman.</p> <h4>Essential responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic and advanced technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to acquire and maintain SCR task(s) for position, as required (MQ-9 Engine Run, Flex Borescope, etc.)</li> <li>Must be able to work without supervision.</li> <li>Provides technical and directional leadership guidance to lower-level Aircraft Mechanics.</li> <li>Provides training to lower-level Aircraft Mechanics.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of five years of actual aircraft mechanic maintenance experience required.</li> <li>Minimum of two years’ experience on MQ-9 aircraft, as aircraft mechanic.</li> <li>Must have advanced knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess advanced knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have an advanced understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions, or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems, and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential Responsibilities</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes, and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems, and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, including pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to lift, carry, and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> <li>Highly desired to have a U.S. passport valid for an additional two years with at least two facing pairs (four total) of blank visa pages.</li> </ul></p><p></p>

<p><h4>Job Description</h4> <p>The C-12/King Air Army Transport Aircraft Mechanic (FAA A&P) services, repairs, and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components.</p> <p><strong>Requirements:</strong></p> <ul> <li>A valid FAA A&P Airframe and Powerplant Certificate is required.</li> <li>Seven (7) years’ experience as an A&P mechanic with seven (7) years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</li> <li>US citizenship is required to obtain a US government Secret Security Clearance and for facility access.</li> </ul> <p><strong>Responsibilities:</strong></p> <ul> <li>Operationally check repaired or modified systems for proper operation.</li> <li>Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment.</li> <li>Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</li> <li>Examine engines for oil leaks and listen to operating engine to detect and diagnose malfunctions.</li> <li>Inspect turbine blades to detect cracks or breaks.</li> <li>Test engine operation using troubleshooting procedures and diagnostic test equipment to identify source of malfunction.</li> <li>Replace or repair worn or damaged components using hand tools, gauges, and test equipment.</li> <li>Remove and install engine from aircraft.</li> <li>Disassemble and inspect parts for wear, warping, or other defects.</li> <li>Repair or replace defective engine parts and reassemble and install engine in aircraft.</li> <li>Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.</li> <li>May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition.</li> <li>Maintain knowledge of aircraft sub-systems, including maintenance parameters, systems operation, limitations, and technical orders.</li> <li>Ability to become qualified and perform engine runs for the aircraft type assigned to support.</li> <li>Ability to read, write, and interpret technical duties is required.</li> <li>Ability to communicate effectively with all levels of employees throughout the organization.</li> <li>May specialize in work, repair, and modification of structural, precision, and functional spare parts and assemblies.</li> <li>Perform other qualified duties as assigned.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>High school diploma or GED equivalent is required.</li> <li>A valid FAA A&P Certificate is required.</li> <li>Seven (7) years’ experience as an A&P mechanic with seven (7) years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</li> <li>Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate US government armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</li> <li>Recent full-time experience in aviation maintenance on the C-12/King Air turbo-prop aircraft during the past 12 months is required.</li> <li>Six (6) months of flight line and overhaul and inspection experience is preferred.</li> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specifications for weight limit.</li> <li>Mechanic tools/toolbox required; mechanics must provide their own shadowed toolbox with each tool etched with PID.</li> <li>A valid US passport is required for deployment/travel; passport must have a minimum of 18 months remaining before expiration date and must be able to obtain required visas.</li> <li>Must be able to pass and clear CENTCOM (CRC) deployment training and Army MOD17 medical for deployment.</li> <li>May be required to travel to and between remote locations in austere and/or hostile environments in support of mission operations.</li> </ul> <h4>Medical and Security Clearance Requirements</h4> <ul> <li>All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed five (5) years.</li> <li>Must be able to obtain and maintain a US government Secret Security Clearance.</li> <li>Must be able to obtain and maintain facility credentials and authorization.</li> <li>US citizenship is required to hold a US government Secret Clearance and facility credentials and authorization to work at this facility.</li> </ul> <h4>Physical and Additional Qualifications</h4> <ul> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specifications for weight limit.</li> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.</li> <li>May be required to carry, push, or pull up to and may exceed 50 pounds.</li> <li>May be required to lift up to 50 pounds to a height of four feet and be required to lift up to 35 pounds to a height of seven feet.</li> <li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li> <li>Must be able to type using a standard keyboard to communicate through email and various software applications.</li> <li>Must be able to distinguish color and judge three-dimensional depths.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li> <li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li> <li>Must be capable of living and working in a potentially hostile environment for an extended period.</li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> </ul></p><p></p>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.USAF equivalent position is Aircraft Mechanic Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Performs all daily launch/recovery duties in support of operational requirements.</li><li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li><li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li><li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li><li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li><li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li><li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li><li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li><li>Must be able to work with little-to-no supervision.</li><li>Performs all other duties as assigned as requested.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Mechanic maintenance experience required.</li><li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li><li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li><li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications</p><ul><li>Associate degree in a relevant career field.</li><li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Aircraft Mechanic Experience within the last 10 years.</li><li>MQ-9 Experience as an Aircraft Mechanic.</li><li>MQ-9 Aircraft Composite Repair / Replacement Experience.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description<br></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Mechanical Supervisor</b> in <b>Kuwait</b>. Our client is a reputed organization in the <b>Power Generation</b> sector seeking skilled and motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Supervise mechanical maintenance activities in a large-scale power plant.<br></li><li>Lead maintenance teams during planned and emergency shutdowns.<br></li><li>Inspect boilers, turbines, pumps, compressors, and rotating equipment.<br></li><li>Ensure preventive and corrective maintenance schedules are followed.<br></li><li>Coordinate with operations and engineering teams for plant reliability.<br></li><li>Ensure compliance with safety regulations and maintenance standards.<br></li><li>Prepare maintenance reports and documentation.<br></li><li>Guide technicians and ensure quality workmanship.<br></li></ul>Required Skills<br><ul><li>Mechanical maintenance of power plant equipment.<br></li><li>Preventive &amp; corrective maintenance planning.<br></li><li>Shutdown and turnaround maintenance.<br></li><li>Reading engineering drawings and technical manuals.<br></li><li>Team leadership with strong safety practices.<br></li></ul>Preferred Skills<br><ul><li>CMMS knowledge.<br></li><li>Root Cause Analysis (RCA).<br></li><li>Leadership in multicultural work environments.<br></li></ul>Work Experience Requirements<br><p>Candidates must possess a <b>minimum of 10 years</b> of experience in mechanical maintenance within a <b>large-scale power plant</b>. Experience supervising maintenance teams and handling critical plant equipment is essential.<br></p><br>Education<br><ul><li><b>Minimum:</b> Diploma in Mechanical Engineering<br></li><li><b>Preferred:</b> Bachelor's Degree in Mechanical Engineering<br></li><li><b>Additional:</b> Relevant maintenance or safety certifications<br></li></ul>Contact Number - 9786888866<br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description<br></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Mechanical Supervisor (Rotating Equipment)</b> in <b>Kuwait</b>. Our client is a reputed organization in the <b>Water Treatment / Desalination</b> sector seeking skilled and motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Supervise maintenance activities for rotating equipment.<br></li><li>Plan and execute annual maintenance of RO and desalination plants.<br></li><li>Inspect pumps, compressors, motors and related mechanical systems.<br></li><li>Coordinate preventive and breakdown maintenance schedules.<br></li><li>Ensure compliance with safety and quality standards.<br></li><li>Lead maintenance technicians and contractors during shutdowns.<br></li><li>Maintain maintenance records and reports.<br></li><li>Coordinate with operations for smooth plant availability.<br></li></ul>Required Skills<br><ul><li>Rotating Equipment Maintenance – Expertise in pumps, compressors and motors.<br></li><li>RO Plant Maintenance – Annual maintenance and servicing experience.<br></li><li>Desalination Systems – Knowledge of mechanical equipment in desalination plants.<br></li><li>Preventive Maintenance – Planning and execution of maintenance schedules.<br></li><li>Mechanical Troubleshooting – Root cause analysis and corrective actions.<br></li></ul>Preferred Skills<br><ul><li>GCC maintenance project experience.<br></li><li>Shutdown and turnaround maintenance experience.<br></li><li>SAP/CMMS maintenance software knowledge.<br></li></ul>Work Experience Requirements<br><p>Candidates should possess a <b>minimum of 10 years</b> of experience in mechanical maintenance with strong exposure to <b>RO Plant and Desalination Plant Annual Maintenance</b>. Experience supervising maintenance teams in industrial environments is essential.<br></p><br>Education<br><ul><li><b>Minimum:</b> Diploma in Mechanical Engineering<br></li><li><b>Preferred:</b> Bachelor's Degree in Mechanical Engineering<br></li><li><b>Additional:</b> Safety or maintenance-related certifications<br></li></ul>Contact Number - 9786888866 <br><br><br> </div>

<p><br></p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>Troubleshooting and Repairs:</strong> Diagnosing mechanical problems, faults and malfunctions in mechanical equipment and systems, using diagnostic tools, equipment manuals, and technical documentation to troubleshoot complex mechanical issues and implementing effective solutions to restore functionality and minimize downtime. Communicate equipment problems or break down information via Senior Tool Pusher to technical maintenance support team.</p><p><strong>Equipment Maintenance &amp; Operations:</strong> Maintaining the reliability and integrity of rig mechanical equipment and systems, including drilling, mechanical, and safety systems. Overseeing the maintenance, repair, and servicing of mechanical equipment at location, including but not limited to engines, generators, pumps, compressors, cranes, and hydraulic systems, to ensure optimal performance of the rig. Survey the condition of all well control equipment in use each shift, report any system issues to the Senior tool pusher and raise corrective work order to manage the repair. Will inform by e mail both the Senior tool pusher and office based well control equipment superintendent of the equipment status so Contractual and API compliance can be assessed. Ensure that repairs, needed or made, are registered in the form of a work order in the company maintenance system. Carry out Planned maintenance work orders on time with good quality and record actual work done, inform Senior Tool pusher where access to perform work is not granted. Ensure Mechanical and Drill crew reference OEM manuals when carrying out PM or CM work on any rig equipment do not reply solely on the PM work instruction. Supervise the oil sample program and review the results, ensure work orders are raised to rectify bad samples. Spot check lubrication carried out by drilling crew for quality. Maintain and repair power plants and monitor power distribution ensure power is always available. Verification and inspection of third-party equipment and installations when required. Ensure new equipment installations on the drilling unit are managed by management of change Synergi case where appropriate as outlined in the ADES management system by highlighting the potential need to Senior Tool Pusher.&nbsp;</p><p><strong>Materials &amp; Equipment:</strong> Plan and coordinate with the Senior Tool Pusher and other departments to secure equipment s and perform safety inspections prior to any operations or major activity such as rig moves, running &amp; retrieving BOP. Ensuring that the appropriate mechanical requirements of the statutory and regulatory bodies including the classification society are adhered to and records maintained. Maintain inventory of spare parts, consumables, and supplies for mechanical equipment, ensuring adequate stock levels are maintained to support ongoing operations and maintenance activities. Coordinating with procurement and logistics teams to procure spare parts and replacement components as needed, ensuring timely delivery, availability &amp; compliance with the class &amp; certification requirements. Responsible for housekeeping standards in machinery and workshop areas. Machine and switchboard areas to be kept clear of all flammable materials.</p><p><strong>Rig Move:</strong> Ensure that all mechanical equipment s are properly secured and protected for transportation, while overseeing the disassembly and loading of equipment s onto transport vehicles. Supervise the rig move crew to reassemble and install all mechanical equipment s at the new location and perform the final checks on the system to ensure they are ready for drilling operations.</p><p><strong>Client Management:</strong> Promote and maintain an effective working relationship with other departments, third party personnel and Client Representatives. Responds to client requests and needs concerning materials, equipment, and personnel after getting adequate management approval.</p><p><strong>Reporting and Documentation:</strong> Maintains proper logs and records of all mechanical maintenance activities, equipment inspections, and repairs in accordance with company procedures and regulatory requirements. Responsible for the quality of the Planned maintenance system work reports for PM and CM work orders for Mechanical department Prepare accurate and timely reports, including daily equipment status reports, incident reports, job safety analysis for hazardous activities. Ensure the permit to work and isolation systems are followed and applied. Supply information to assist in the development of maintenance and repair budget.</p><p><strong>People Management:</strong> Provide clear instructions to their team regarding their duties, responsibilities, and any necessary safety precautions prior to commencing work. Mentor, develop and train their team to ensure safe and effective operations. Identifies opportunities for skill and career advancement, works to support the professional growth of their team. Ensure their team receives the necessary required training to perform their duties safely and effectively through on-the-job training, and participation in safety drills and exercises. Support, promote and actively participate in ADES s Competency Assurance Program for their team. Evaluates the performance of their team on constant and fair feedback basis, identify areas for improvement, drive ADVANCE process to formalize a performance management culture.</p><p><strong>Job Requirements:</strong></p><p><strong>Education &amp; Experience:</strong> Formal training as mechanic in the form of a multi-year apprenticeship and or technical degree is preferred. Time served in the oil field as mechanic with relevant training certificates and references may be accepted in place of apprenticeship. Minimum three (3) years of working experience in the mechanical field in drilling and workover operations and have demonstrable supervisory skills. Preferred to have working experience on land rigs or offshore rigs.</p><p><strong>Skills/Competencies Required:</strong> Fluent in the English language (Spoken &amp; Written) PC literate in Microsoft Office Situation Awareness, Communication, Teamwork, detail oriented, Problem Solving.</p><p><strong>Physical Requirements:</strong> Regularly climbing (stairs, ladders). Regularly bending, twisting, and standing. Ability to work outdoors under all extreme weather conditions (Noise / Humidity / Cold / Heat). Ability to work at heights and in confined spaces. Ability to workday or night shift as required with 12 hours minimum shift.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p><p><strong>Desired Candidate Profile</strong></p><p>Formal training as mechanic in the form of a multi-year apprenticeship and or technical degree is preferred. Time served in the oil field as mechanic with relevant training certificates and references may be accepted in place of apprenticeship. Minimum three (3) years of working experience in the mechanical field in drilling and workover operations and have demonstrable supervisory skills. Preferred to have working experience on land rigs or offshore rigs.</p><p><strong>Skills/Competencies Required:</strong> Fluent in the English language (Spoken &amp; Written) PC literate in Microsoft Office Situation Awareness, Communication, Teamwork, detail oriented, Problem Solving.</p><p><strong>Physical Requirements:</strong> Regularly climbing (stairs, ladders). Regularly bending, twisting, and standing. Ability to work outdoors under all extreme weather conditions (Noise / Humidity / Cold / Heat). Ability to work at heights and in confined spaces. Ability to workday or night shift as required with 12 hours minimum shift.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p>

<p>Would you like the opportunity to collaborate on a wide range of technical products? Do you enjoy creating innovative and strategic solutions to solve complex problems? Join our cutting-edge Drilling Services team At Baker Hughes our purpose is clear. We take energy forward making it safer, cleaner and more efficient for people and the planet. Our team partners with the business to effectively enable and sustain change to improve our performance. Partner with the best As an Electro-Mechanic Master / General, you will troubleshoot, test, assemble, disassemble and perform the visual inspection of mechanical assemblies. Whilst assisting in repairing and modifying non-conforming equipment, you will perform all test with minimal instruction. As an Electro-Mechanic Master, you will be responsible for:</p><ul><li>Reviewing procedures for assembly, disassembly, and test verification accuracy</li><li>Configuring test stations and systems</li><li>Analysing and interpreting data from environmental tests, and troubleshooting equipment problems</li><li>Assisting in the set-up of experiments and the recordings of experimental data in collaboration with Engineering and Reliability groups</li><li>Testing and evaluating the performance and, if required, repairing general purpose test equipment</li><li>Performing quality assurance activities required by manufacturing or engineering specifications and ISO requirements to ensure compliance.</li><li>Working in compliance with HS&amp;E policies and procedures</li></ul><p>Fuel your passion To be successful in this role you will:</p><ul><li>Have a 3-year technical diploma or associate degree in the electrical/Mechanical field or higher</li><li>Have at least 5 - 10 years of related experience in electro-mechanical function in oil and Gas industry/domain</li><li>High level of knowledge in the maintenance of electronics</li><li>Have advanced skills in soldering and assembling of electro-mechanical devices</li><li>Have the ability to read and interpret blueprints, wiring diagrams, assembly prints and parts lists</li><li>Demonstrate the ability to identify problems and be able to develop solutions</li><li>Have previous experience with Baker Hughes (preferred)</li><li>Display an advanced mechanical aptitude and experience with general hand tools and precision measuring equipment.</li></ul><p>Work in a way that works for you We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns: This role is a shift-based working pattern. Working with us Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other. Working for you Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:</p><ul><li>Contemporary work-life balance policies and wellbeing activities</li><li>Comprehensive private medical care options</li><li>Safety net of life insurance and disability programs</li><li><br></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Have a 3-year technical diploma or associate degree in the electrical/Mechanical field or higher</li><li>Have at least 5 - 10 years of related experience in electro-mechanical function in oil and Gas industry/domain</li><li>High level of knowledge in the maintenance of electronics</li><li>Have advanced skills in soldering and assembling of electro-mechanical devices</li><li>Have the ability to read and interpret blueprints, wiring diagrams, assembly prints and parts lists</li><li>Demonstrate the ability to identify problems and be able to develop solutions</li><li>Have previous experience with Baker Hughes (preferred)</li><li>Display an advanced mechanical aptitude and experience with general hand tools and precision measuring equipment.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Mechanical Technician</p><br><p><span><strong>Responsibilities:</strong></span></p><br><p><span>-Inspect, repair, maintain, and pressure test Liner Hanger systems and related equipment.<br>-Disassemble, clean, assemble, and refurbish Liner Hanger tools according to OEM procedures.<br>-Diagnose equipment failures and perform troubleshooting and corrective maintenance.<br>-Conduct dimensional inspections, function testing, and quality checks to ensure equipment readiness.<br>-Complete maintenance records, work orders, and inspection documentation accurately.<br>-Ensure compliance with HSE, quality, and operational standards.<br>-Safely operate workshop machinery, lifting equipment, and testing equipment.<br>-Provide technical support and guidance to junior technicians when required.</span></p><br><p><span><strong>Skills:</strong><br>-Liner Hanger equipment maintenance and repair and wellbore cleaning WBC and Cementing Head<br>-Mechanical troubleshooting and failure analysis<br>-Pressure testing and function testing<br>-Assembly and disassembly of downhole tools<br>-Precision measuring and quality inspection<br>-Reading technical drawings and maintenance procedures<br>-Root cause analysis and problem-solving<br>-Strong safety awareness and teamwork</span></p><br><p><span><strong>Qualifications:</strong><br>-Diploma in Engineering or related discipline.<br>-4-6 years of experience in Liner Hanger equipment repair and maintenance within the Oil &amp; Gas industry.<br>-Hands-on experience with hydraulic and mechanical Liner Hanger systems, running tools, packers, and related downhole equipment.<br>-Knowledge of pressure testing, dimensional inspection, and equipment certification processes.<br>-Forklift, crane, or lifting equipment certification preferred.<br>-Ability to work in a workshop and field support environment.<br>-Willingness to travel up to 10% as required.</span></p><br><p>SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><br> </div>

Technician <br><br>Job Id :100194240<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br> Electrical / Mechanical Draftsman<br><br>Sound knowledge and proficiency in Auto CAD, with experience in electrical and mechanical drafting.<br><br> Electrical Busbar Panel Technician<br><br>Sound knowledge and hands-on experience in MSB, DB busbar fabrication, installation, modification, and related works.<br><br>Preferred Immediate Joining.<br><br>Interested Candidate Send CV to Whatsapp +965 66085731<br><br>Basic Details<br><br>Location : Shuwaikh , Kuwait<br><br>Qualification<br><br>Posted : 21 days ago<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : +965 66085731<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : Not-Mentioned

Driver <br><br>Job Id :100195419<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>We are looking for experienced Generator / Diesel Mechanics with the following qualifications and responsibilities:<br><br>Key Responsibilities<br><br> Perform preventive and corrective maintenance on diesel generators of various capacities (e.g., 30 KVA to 2000 KVA). Perform inspection, servicing, maintenance, and repair of diesel-powered equipment and vehicles. Diagnose and repair mechanical, electrical, and control system faults. Conduct routine inspections, servicing, lubrication, and filter replacement. Repair and overhaul diesel engines, alternators, radiators, fuel systems, and cooling systems. Troubleshoot starting, charging, governor, and voltage regulation issues. Test generator performance under load and ensure stable voltage and frequency. Install, commission, and decommission generator sets. Maintain battery systems, chargers, control panels, and Automatic Transfer Switch (ATS) systems. Replace defective components including injectors, fuel pumps, turbochargers, belts, hoses, and sensors. Maintain accurate maintenance records, service reports, and spare parts inventory. Respond to emergency generator breakdowns and minimize equipment downtime. Ensure compliance with manufacturer specifications and safety procedures. Coordinate with operations teams to schedule maintenance activities. Maintain housekeeping standards in the workshop and at project sites.<br><br>Skills Required<br><br> Knowledge of diesel engines and alternators. Ability to read electrical and mechanical drawings. Experience with Perkins, Cummins, Caterpillar, FG Wilson, Atlas Copco, Volvo Penta, MTU, or similar generator brands. Familiarity with engine control modules (ECM) and diagnostic tools. Strong troubleshooting and fault-finding skills. Ability to work independently as well as part of a team. Ability to work independently and under pressure during emergency breakdowns. Commitment to workplace safety and preventive maintenance. Minimum 5-8 Years’ Experience and available valid Kuwaiti Driving License will be preferred. Candidate should be inside Kuwait and must have valid residency Visa 18 with Local transfer.<br><br>Job Types: Full-time, Permanent<br><br>Submit your CV to: mehndishah@sweetynational.com<br><br>Whats App: 66286604<br><br>Basic Details<br><br>Location : Fahaheel , Kuwait<br><br>Qualification<br><br>Posted : Today<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : +965 66286604<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : Not-Mentioned

<p>The UH-60 Aircraft Mechanic AM-2 (UH-60 Army Aviation) performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.</p><p><strong>Desired Candidate Profile</strong></p><p>With a valid (FAA) A&amp;P certificate (Preferred), Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required. (See below for requirements without A&amp;P).</p><p>Valid US Passport and US Citizenship is Required to obtain the NAC-I clearance and for facility access.</p><p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</p><p>Safely prepare aircraft for inspections and maintenance checks and services.</p><p>Perform scheduled inspections and assist in performing special inspections.</p><p>Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.</p><p>Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives.</p><p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p><p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation.</p><p>Participate in maintenance test flights and operation checks as required.</p><p>Perform other duties as requested.</p><strong>Minimum Requirements :</strong><p>High School Diploma or Equivalent is required.</p><p>With a valid (FAA) A&amp;P certificate, Two (2) years of aviation maintenance experience, Two (2) years rotary wing aircraft experience, and Two (2) years on the assigned MDS UH-60 aircraft is Required.</p><p>All experience must be within the Five (5) most recent years.</p><p>Without a valid (FAA) A&amp;P certificate; Must have Three (3) years aviation maintenance experience, Three (3) years of rotary wing aircraft experience, and a minimum of Three (3) years on the assigned UH-60 Mission Design Series (MDS) is Required.</p><p>All experience must be within the Six (6) most recent years.</p><p>U.S. Military Technical school or specialized training course is desired, certification of education level is required.</p><p>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</p><p>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</p><p>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</p><strong>Security Clearance Requirements:</strong><p>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</p><strong>Additional and Preferred Qualifications :</strong><p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</p><p>Broad knowledge of aircraft sheet metal/structural modifications and repair.</p><p>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</p><p>Working knowledge of technical publications and Logistics Information Systems.</p><p>Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</p><p>Participate in maintenance test flights and operation checks as required.</p><p>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</p><p>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p><strong>Physical Requirements/Working Environment</strong><p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p><p>Must be able to climb stairs, ramps, ladders, and work stands.</p><p>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</p><p>May be required to lift heavy objects whose weight may exceed 50 pounds.</p><p>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p><p>Will handle dirty parts and lubricants.</p><p>Will be required to wear proper Personal Protective Equipment (PPE).</p><p>Must be able to pass a Respirator Physical and Fit Test qualification.</p><p>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</p><p>Must be able to lift/push/pull minimum of 50 pounds.</p><p>May work in maintenance shop or outside.</p><p>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p><p>May be exposed to extreme noise from operating equipment.</p><p>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p><p>May be expected to work in austere environments and all-weather conditions</p>

<p>Job Purpose The Data Center Mechanical Engineer owns the mechanical and cooling infrastructure of the data center at engineering level, from the central cooling plant through to the data hall cooling environment. The role is responsible for mechanical maintenance strategy, system reliability, operational procedures, environmental performance, vendor management, safety compliance, spare-parts planning, and emergency response. The Mechanical Engineer directs the Mechanical Manning Technicians, authorizes equipment changeovers and critical maintenance activities, approves mechanical procedures, and acts as the mechanical technical authority during incidents and operational escalations.</p><p>Key Responsibilities and Areas of Ownership</p><ul><li>Take engineering ownership of the data center mechanical and cooling infrastructure, including chillers, cooling towers, chilled-water pumps, condenser-water pumps, heat exchangers, CRAH units, CRAC units, AHUs, ventilation systems, fans, filters, coils, valves, actuators, piping systems, and associated controls.</li><li>Manage the operation, reliability, and performance of chilled-water and precision-cooling systems serving the data halls and supporting areas.</li><li>Own mechanical equipment operating procedures, changeover procedures, start-up and shutdown sequences, and equipment rotation plans.</li><li>Authorize, lead, and supervise critical mechanical activities, including chiller changeovers, pump changeovers, cooling-tower changeovers, isolation activities, system draining, system filling, and restoration of equipment to service.</li><li>Monitor and maintain data hall environmental conditions, including temperature, humidity, airflow, differential pressure, cooling capacity, and equipment loading.</li><li>Review chilled-water supply and return temperatures, water flow, system pressure, differential pressure, valve positions, and system delta-T to identify performance issues and operational risks.</li><li>Manage cooling redundancy and capacity to ensure sufficient cooling remains available during maintenance, equipment failure, testing, or abnormal operating conditions.</li><li>Own the mechanical safety program, including Lockout/Tagout, Permit to Work, risk assessments, safe isolation, refrigerant safety, chemical-handling controls, and compliance with HSE requirements.</li><li>Develop and manage the annual mechanical Planned Preventive Maintenance program in accordance with OEM recommendations, equipment criticality, maintenance history, and operational requirements.</li><li>Prepare, review, approve, and maintain mechanical Standard Operating Procedures, Methods of Procedure, Emergency Operating Procedures, maintenance instructions, risk assessments, and equipment changeover procedures.</li><li>Ensure that all mechanical maintenance activities are planned around available cooling redundancy and executed without compromising data center availability.</li><li>Own vendor coordination for mechanical maintenance activities and supervise OEM major services, equipment overhauls, repairs, inspections, and specialist testing.</li><li>Review vendor method statements, risk assessments, service reports, test results, recommendations, and corrective-action requirements.</li><li>Manage critical spare-parts and inventory planning for chillers, pumps, cooling towers, CRAH and CRAC units, valves, actuators, sensors, filters, belts, bearings, motors, VFDs, and other mechanical systems.</li><li>Analyze cooling-system performance, equipment efficiency, energy consumption, operating trends, alarm history, temperature profiles, water-flow conditions, and equipment loading.</li><li>Identify and implement opportunities to improve cooling efficiency, airflow management, chilled-water performance, equipment sequencing, and overall energy performance without reducing system resilience.</li><li>Investigate mechanical faults, high-temperature conditions, leaks, abnormal vibration, low-flow conditions, low delta-T, equipment trips, control failures, and recurring alarms.</li><li>Lead root cause analysis for mechanical incidents and equipment failures and implement corrective and preventive actions.</li><li>Direct, develop, and train Mechanical Manning Technicians in operational procedures, inspections, first-line maintenance, alarm response, safe isolation, and incident escalation.</li><li>Review technician shift logs, inspection checklists, operating readings, alarm reports, and job-card closure records.</li><li>Support testing and commissioning activities, integrated systems testing, functional performance testing, equipment acceptance, redundancy verification, and operational-readiness activities.</li><li>Support predictive and condition-based maintenance programs, including vibration analysis, oil analysis, refrigerant checks, water and coolant sampling, thermal inspections, leak detection, and equipment-performance trending.</li><li>Manage liquid-cooling systems, Cooling Distribution Units, coolant loops, leak-detection systems, valves, pumps, and associated controls where installed.</li><li>Coordinate water-treatment activities, water-quality monitoring, chemical dosing, sampling, and corrective actions for chilled-water, condenser-water, and liquid-cooling systems where applicable.</li><li>Support WTP, STP, plumbing, drainage, and mechanical fire-protection systems where included within the data center operational scope.</li><li>Coordinate with electrical, BMS, IT, operations, HSE, vendors, and management teams during planned maintenance, incidents, testing, and emergency situations.</li><li>Maintain accurate mechanical documentation, asset records, maintenance reports, operating procedures, equipment histories, incident reports, testing records, and technical drawings.</li><li>Act as the mechanical technical authority during cooling incidents and operational escalations on a 24/7 on-call basis.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Engineer Level</li><li>Bachelor's degree in Mechanical Engineering.</li><li>Minimum of 5 years of mechanical, HVAC, cooling-plant, or critical-facility operations and maintenance experience.</li><li>At least 2 years of experience in a data center or another critical facility where loss of cooling could affect essential operations.</li><li>Demonstrated engineering-level experience with chilled-water systems, precision cooling, or critical HVAC systems.</li><li>Practical knowledge of chillers, pumps, cooling towers, heat exchangers, CRAH units, CRAC units, AHUs, valves, actuators, VFDs, and mechanical controls.</li><li>Experience in managing cooling redundancy, equipment capacity, environmental conditions, and critical maintenance activities in a live operational environment.</li><li>Demonstrated ownership of mechanical maintenance planning, technical procedure writing, incident response, vendor management, and spare-parts planning.</li><li>Experience preparing or approving SOPs, MOPs, EOPs, risk assessments, isolation plans, and maintenance procedures.</li><li>Ability to read and interpret P&amp;IDs, mechanical drawings, equipment schematics, sequence-of-operation documents, control diagrams, and OEM technical manuals.</li><li>Working knowledge of BMS or BAS platforms, mechanical alarms, equipment trends, sensors, control sequences, and environmental monitoring.</li><li>Good understanding of chilled-water temperatures, flow, pressure, differential pressure, delta-T, heat transfer, airflow, humidity, and cooling-capacity principles.</li><li>Experience with root cause analysis, corrective-action planning, and technical incident reporting.</li><li>Familiarity with testing, commissioning, integrated systems testing, and mechanical-system operational-readiness activities.</li><li>Fluent written and spoken English with strong technical reporting and communication skills.</li></ul><p>Other Requirements</p><ul><li>The role is fully on-site within an operational data center environment.</li><li>Availability for 24/7 on-call support is required.</li><li>The employee must be available to support planned shutdowns, emergency maintenance, testing activities, shift coverage, weekends, nights, and public holidays when operationally required.</li><li>The employee must comply with all company, client, data center, HSE, Permit to Work, LOTO, security, and access-control requirements.</li><li>The employee must be able to coordinate effectively with technicians, contractors, OEM vendors, operations teams, IT teams, and other engineering disciplines.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Skills and Behavioral Competencies</b></p><p><b>Communication:</b></p><ul><li>Ability to communicate effectively verbally and in writing.</li><li>Effective communication with others (co-workers, supervisors, and other departments) through providing and exchanging information.</li></ul><p><b>Professional Abilities and Skills:</b></p><ul><li>Familiarity with safety and quality standards.</li><li>Good knowledge of production processes and food safety.</li><li>Optimal interaction with company members and mastering work while preserving company property and its secrets.</li><li>Ability to work under pressure.</li><li>Good knowledge of mechanical systems and components.</li><li>Ability to use mechanical tools, equipment, and instruments.</li><li>Ability to conduct technical analyses.</li></ul><p><b>Languages:</b></p><p>• Ability to communicate in Arabic or English, at least at a conversational level.</p><p><b>Personal Skills:</b></p><ul><li>Flexibility in work.</li><li>Responsibility and building trust with others.</li><li>Teamwork skills.</li><li>Knowledge of labor laws.</li><li>Punctuality.</li><li>Accuracy and focus.</li><li>Job competencies.</li><li>Required competency rating.</li></ul><p><br></p><p><b>Tasks and Responsibilities</b></p><ul><li>Inspect machinery and equipment according to maintenance plans established by management.</li><li>Clean machinery, equipment, and work areas and follow all instructions issued by the direct supervisor.</li><li>Prepare the required tools, equipment, materials, and instruments for inspection, maintenance, and repair activities.</li><li>Conduct routine inspections and preventive maintenance of mechanical machinery and equipment.</li><li>Coordinate with the direct supervisor to ensure the availability of required spare parts.</li><li>Apply all workplace health and safety principles and procedures during maintenance activities.</li><li>Coordinate with other maintenance teams involved in maintenance and repair activities.</li><li>Perform maintenance and repairs on mechanical machinery and equipment according to the instructions of the direct supervisor.</li><li>Assist with the installation and commissioning of new mechanical equipment.</li><li>Prepare technical reports on the condition and performance of mechanical equipment.</li><li>Train and guide junior workers on basic mechanical maintenance activities.</li><li>Participate in developing and improving preventive maintenance plans for mechanical equipment.</li><li>Maintain professional ethics and prioritize the company's interests in all activities.</li><li>Perform any other duties within the scope of the position as assigned by the supervisor.</li></ul><p><b>Required Skills &amp; Competencies</b></p><ul><li>Good knowledge of mechanical equipment systems and components.</li><li>Ability to use mechanical tools, equipment, and instruments.</li><li>Ability to perform basic technical analysis and identify mechanical issues.</li><li>Good understanding of production processes and food safety requirements.</li><li>Knowledge of workplace safety and quality standards.</li><li>Ability to work effectively under pressure.</li><li>Strong attention to detail and accuracy.</li><li>Good teamwork and communication skills.</li><li>Flexible and responsible approach to work.</li><li>Punctual, reliable, and accountable.</li><li>Ability to maintain company property and confidentiality.</li><li>Good interpersonal and professional skills.</li></ul><p>Language Requirements</p><ul><li>Ability to communicate in <b>Arabic or English</b>, at least at a conversational level.</li></ul><p><b>Qualifications:</b></p><ul><li>Technical Diploma in Mechanics or equivalent.</li><li>High School Diploma with practical experience.</li></ul><p><b>Experience:</b></p><ul><li>Fresh Graduate.</li><li>3 years experience.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Job Summary</p><p>Responsible for inspecting, maintaining, troubleshooting, and repairing mechanical equipment and machinery to ensure safe, reliable, and efficient operation. The role supports preventive maintenance activities, equipment installation, technical analysis, spare parts coordination, and compliance with safety and quality standards.</p><p>Key Responsibilities</p><ul><li>Inspect machinery and equipment according to maintenance plans established by management.</li><li>Clean machinery, equipment, and work areas and follow all instructions issued by the direct supervisor.</li><li>Prepare the required tools, equipment, materials, and instruments for inspection, maintenance, and repair activities.</li><li>Conduct routine inspections and preventive maintenance of mechanical machinery and equipment.</li><li>Coordinate with the direct supervisor to ensure the availability of required spare parts.</li><li>Apply all workplace health and safety principles and procedures during maintenance activities.</li><li>Coordinate with other maintenance teams involved in maintenance and repair activities.</li><li>Perform maintenance and repairs on mechanical machinery and equipment according to the instructions of the direct supervisor.</li><li>Assist with the installation and commissioning of new mechanical equipment.</li><li>Prepare technical reports on the condition and performance of mechanical equipment.</li><li>Train and guide junior workers on basic mechanical maintenance activities.</li><li>Participate in developing and improving preventive maintenance plans for mechanical equipment.</li><li>Maintain professional ethics and prioritize the company's interests in all activities.</li><li>Perform any other duties within the scope of the position as assigned by the supervisor.</li></ul><p>Required Skills &amp; Competencies</p><ul><li>Good knowledge of mechanical equipment systems and components.</li><li>Ability to use mechanical tools, equipment, and instruments.</li><li>Ability to perform basic technical analysis and identify mechanical issues.</li><li>Good understanding of production processes and food safety requirements.</li><li>Knowledge of workplace safety and quality standards.</li><li>Ability to work effectively under pressure.</li><li>Strong attention to detail and accuracy.</li><li>Good teamwork and communication skills.</li><li>Flexible and responsible approach to work.</li><li>Punctual, reliable, and accountable.</li><li>Ability to maintain company property and confidentiality.</li><li>Good interpersonal and professional skills.</li></ul><p>Language Requirements</p><ul><li>Ability to communicate in <b>Arabic or English</b>, at least at a conversational level.</li></ul><p><b>Qualifications:</b></p><ul><li>Technical Diploma in Mechanics or equivalent.</li><li>High School Diploma with practical experience.</li></ul><p><b>Experience:</b></p><ul><li>Fresh Graduate.</li><li>3 years experience.</li></ul><p><br></p></div>

<strong>Overview</strong> <br> <br> <p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p> <br> <strong>Responsibilities</strong> <br> <br> <p>The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities include maintenance and serviceability procedures for subsystem components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of airframes and power plants engineering principles, techniques, and methods in the maintainability of existing equipment and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</p> <p> </p> <p> <strong>Major Job Activities</strong> </p> <p> <strong>Description:</strong> </p> <p> </p> <p> Apply and provide a thorough working knowledge of airframes and power plant systems to include aircraft modification procedures and experience with specific airframe, hydraulic, engine, and propeller systems, systems integration, system/component failure analysis, inspection, repair, and testing of airframes and power plant systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems.</p> <p> </p> <p> Performance abilities include performance of maintenance and servicing related aircraft components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation and incorporates applicable technical directives and bulletins.</p> <p> Troubleshoots and/or repairs malfunctions in the aircraft airframes and power plants systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J MRC/MIMs, to include performing calibration procedures and required functional tests.</p> <p> </p> <p> Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs.</p> <p> </p> <p> Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components</p> <p> </p> <p> Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions.</p> <p> Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control.</p> <p> Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system.</p> <p> Performs applicable O and I level maintenance functions in support of In-Flight Refueling Systems and rebuild shop and Aircraft Tire &amp; Wheel rebuilding.</p> <p> Perform scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment, pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated airframes and power plants equipment systems.</p> <p> Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures.</p> <p> Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/</p> <p> Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures</p> <p> When necessary, perform other duties and supervisory functions, critical to the function of the program and to assure compliance with the Performance Work Statement (PWS).</p> <br> <strong>Qualifications</strong> <br> <br> <p> <strong>EDUCATION and/or EXPERIENCE:</strong> </p> <p>Graduation from a standard four (4) year high school or equivalent (GED)</p> <p> </p> <p>This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance.<br> </p> <p> </p> <p> <strong>Material &amp; Equipment Directly Used</strong> </p> <p> </p> <p>Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems.</p> <p> </p> <p><br></p>

<p>The Mechanical Metrology Engineer is the resident expert in his field and, in conjunction with the Kuwait Senior Engineer, provides engineering/consultant services to the GOK. Conducts research and studies new equipment to ensure that the latest developments in technique and equipment are included in metrology planning for future acquisition. Assists in the development and implementation of a Metrology QA Program as required. Assists in obtaining and maintaining laboratory QA accreditation. Assesses requirements and develops new measurement techniques and approaches related to mechanical, electro- mechanical, optical, electro-optical, chemical, and electro-chemical calibration methodology. Also performs analysis and evaluation of equipment test and performance requirements, and prescribes calibration approaches, test equipment and servicing requirements necessary to assure measurement traceability. Directs, conducts and evaluates the development of calibration procedures for assigned equipment categories. Conducts liaison and coordinates with technical societies and engineering facilities of other countries to remain current with the state-of-the-art and new measurement techniques. Responsible for laboratory facility and related environmental control development, operation and maintenance. Coordinates with civilian contractor and military civil engineering organizations on all projects affecting metrology facilities to ensure timely completion. Acts as consultant to GOK military and ministries on matters pertaining to metrology facilities and environmental requirements. Conducts liaison and coordination with technical societies and engineering facilities of other countries to remain current with state-of-the-art for metrology facilities and environmental control systems. Works with the Electrical Engineer on all matters associated with Power Production and Facilities. It is anticipated that Engineers will be assigned as these job descriptions state and other related specific tasking details and priorities will be determined and set by the Commander, KAFMB and communicated to the Contractor lead.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>An Associate's degree in mechanical engineering, physics or a related technical field from an accredited college or university and twelve (12) years of work experience operating, maintaining, troubleshooting, repairing, calibrating electronic precision measurement equipment and calibration laboratory reference standards. Includes qualification requirements D and E.</li><li>OR; Completion of a U.S. military precision measurement and calibration school and twelve (12) years of work experience in the metrology and calibration field.</li><li>Completion of a precision measurement and calibration school at an accredited school, or within a specialized calibration firm, and twelve (12) years of experience operating, maintaining, troubleshooting, repairing and calibrating physical/dimensional precision measurement equipment and calibration laboratory reference standards.</li><li>I Five (5) years of experience in technical oversight and training responsibilities of calibration and repair technicians with three (3) years within the last five (5) years.</li><li>Experience in researching requirements and maintaining calibration laboratory facility and related environmental control systems.</li><li>Must have an Active Secret US Government Clearance.</li><li>US Citizenship is required to obtain a Secret Clearance.</li></ul>