Security Camera Watch Jobs - Capital Governorate (Kuwait) Kuwait

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a senior <strong>full-stack engineer</strong> to lead URZA deployment and customer-facing technical delivery across active customer programs. <strong>This req can land at either Senior Solution Engineer (L5) or Solution Architect (L6)</strong> depending on demonstrated depth see leveling below.</p> <p>You will own URZA deployments end-to-end at customer sites primarily in DoW and military operating environments. You will lead engagements as the senior engineering presence on the ground, partner directly with Mission Leads and Field Operations, and represent NODA in customer technical reviews. Expect significant time on-site and significant time writing runbooks, deployment guides, ConOps documents, after-action reports.</p> <p><strong>What you'll do</strong></p> <ul> <li><p>Lead URZA deployments end-to-end at customer sites in DoW and military operating environments.</p></li> <li><p>Configure URZA for each customer's mission and ConOps.</p></li> <li><p>Integrate URZA with third-party C2 systems, sensors, software APIs, and external data sources (weather, reconnaissance, intelligence feeds).</p></li> <li><p>Run customer technical reviews and operator training; partner with Mission Leads on engagement coordination.</p></li> <li><p>Build reusable engagement scaffolding (runbooks, ConOps templates, integration playbooks); mentor mid-level Solution Engineers.</p></li> </ul> <p><strong>Required Qualifications</strong></p> <ul> <li><p>5+ years of full-stack engineering experience, with significant customer-facing or forward-deployed work.</p></li> <li><p>Strong proficiency in Python, C++, or Rust; advanced Linux fluency.</p></li> <li><p>Networking depth (TCP/IP, UDP, multicast, routing) and field debugging across multiple system layers.</p></li> <li><p>Demonstrated deployment experience in DoW, military, or comparable operational environments.</p></li> <li><p>U.S. citizenship; able to obtain a security clearance.</p></li> </ul> <p><strong>Preferred Qualifications</strong></p> <ul> <li><p>Hands-on with autonomous systems or unmanned vehicles (UAS, UGV, USV, UUV).</p></li> <li><p>Tactical C2 systems (TAK, Cursor-on-Target, Link 16) or pub-sub middleware (Zenoh, DDS).</p></li> <li><p>Experience integrating sensors, third-party APIs, or external data feeds (weather, reconnaissance, intelligence).</p></li> <li><p>Prior defense, autonomy, or robotics company experience; classified / ITAR / CMMC environment exposure.</p></li> <li><p>Active security clearance.</p></li> </ul> <p><strong>Leveling Senior SE (L5) vs. Solution Architect (L6)</strong></p> <p><strong>Senior Solution Engineer (L5):</strong> Owns URZA deployment for a single engagement. Leads on-site execution; partners with a more senior engineer on architecture decisions. Operates independently within an engagement; escalates cross-engagement trade-offs. Mentors mid-level SEs.</p> <p><strong>Solution Architect (L6):</strong> Owns URZA deployment architecture across multiple concurrent engagements. Defines integration patterns and ConOps templates that other SEs reuse. Holds customer technical authority where the customer expects an architect. Influences URZA roadmap and the integration layer directly through field learning.</p> <p><strong>Skills &amp; Attributes</strong></p> <ul> <li><p>Systems thinker across compute, network, vehicle behavior, and ConOps.</p></li> <li><p>Field-grounded; comfortable diagnosing in degraded conditions on a live exercise clock.</p></li> <li><p>Documentation-disciplined.</p></li> <li><p>Customer-credible; holds technical authority without overstating or underselling.</p></li> <li><p>Self-directed; thrives in ambiguity.</p></li> </ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Location:</strong> Kuwait (CENTCOM AOR) (Home office: Austin, TX)<br> <strong>Travel:</strong> Mission-dependent, up to ~75% (OCONUS rotations)<br> <strong>Clearance Requirement:</strong> Active Secret required</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">Job Summary <p>Agility is looking for a Lead Technology Architect to serve as the senior-most technical authority for our messaging, collaboration, and identity estate across multiple organizational environments.</p> <p>This is a hands-on leadership role you will personally design, build, secure, and operate our platforms while setting technical standards and leading a small team of 1 2 administrators. There is no higher technical authority within the function; you will own critical decisions end-to-end.</p> <p>The portfolio spans Microsoft Entra ID, Active Directory, Exchange Online/Hybrid, Microsoft Teams and SBC voice, SharePoint/OneDrive, Microsoft Defender, Intune endpoint fleet, certificates, DNS, enterprise AI platforms (Claude + Microsoft Copilot), and a large SSO/application integration portfolio.</p> <p> </p> Your Responsibilities Identity &amp; Access Management <ul> <li>Administer Microsoft Entra ID and on-premises AD across all environments</li> <li>Design and maintain Conditional Access, PIM, RBAC, MFA, and SSO (OAuth, OIDC, SAML)</li> <li>Own hybrid identity via Entra Connect</li> </ul> Messaging &amp; Email <ul> <li>Administer Exchange Online and Exchange Server (hybrid), including DAG, mail flow, and transport rules</li> <li>Own email security (gateway, DMARC, DKIM, SPF) and manage mailbox migrations</li> </ul> Collaboration &amp; Voice <ul> <li>Administer Microsoft Teams policies, governance, and SBC-based enterprise voice (dial plans, call queues, PSTN)</li> <li>Manage SharePoint Online and OneDrive, including external sharing and Known Folder Move</li> </ul> Security &amp; Threat Protection <ul> <li>Operate Microsoft Defender for Office 365 and Endpoint (EDR, ASR, security baselines)</li> <li>Lead incident response and maintain hardening controls aligned to CIS benchmarks</li> </ul> Endpoint Management (Intune) <ul> <li>Manage a mid-to-large multi-country fleet (Windows, macOS, Android, iOS)</li> <li>Own Autopilot, compliance/configuration policies, update rings, app packaging, and PowerShell remediation scripts</li> </ul> Certificates, DNS &amp; Web Publishing <ul> <li>Manage full SSL/TLS certificate lifecycle and DNS/CDN/WAF/DDoS platforms</li> <li>Own domain governance, registrations, and the web publishing approval workflow</li> </ul> Artificial Intelligence <ul> <li>Administer enterprise AI platforms including Claude integrations and Microsoft Copilot</li> <li>Design AI workflows and agents, govern AI access, model organizational data, and manage AI licensing</li> </ul> Architecture, Governance &amp; Leadership <ul> <li>Act as technical design authority; maintain standards, runbooks, and documentation</li> <li>Lead, mentor, and delegate to a small admin team</li> <li>Serve as final escalation point; on-call for critical incidents</li> </ul> <p> </p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">Your Qualifications Education </p><ul> <li>Bachelor's degree in Computer Science, IT, Engineering, or related field (Master's preferred)</li> <li>Exceptional hands-on experience may be considered in lieu of formal qualifications</li> </ul> Experience <ul> <li>12 15 years in enterprise IT infrastructure with deep Microsoft stack expertise</li> <li>5 7 years in a senior architect or technical lead role owning M365 environments end-to-end</li> <li>Proven hands-on experience with Exchange hybrid, Entra ID/AD, Intune at scale, and Microsoft Defender</li> <li>Practical experience with enterprise AI platforms (Claude, Microsoft Copilot), including workflow design and data modeling</li> </ul> Certifications (Required/Strongly Preferred candidates should hold several) <ul> <li>MS-102 Microsoft 365 Enterprise Administrator Expert</li> <li>SC-300 Identity and Access Administrator Associate</li> <li>SC-200 Security Operations Analyst Associate</li> <li>MD-102 Endpoint Administrator Associate</li> <li>MS-700 Teams Administrator Associate</li> <li>AZ-104 Azure Administrator Associate</li> <li>MS-203 Messaging Administrator Associate (or equivalent)</li> </ul> Other Requirements <ul> <li>Based in Kuwait or willing to relocate; on-site at Kuwait Head Office</li> <li>Eligible to hold Global Administrator / privileged access (enhanced background screening may apply)</li> <li>Fluent professional English; Arabic is an advantage</li> <li>On-call availability for critical incidents</li> </ul> <p> </p> <p> <strong>Your Proficiencies </strong> </p> <ul> <li>Excellent problem-solving skills and attention to detail </li> <li>Effective communication and collaboration skills </li> <li>Ability to work independently and handle multiple tasks </li> <li>Analytical and troubleshooting skills </li> <li>Stakeholder Management</li> <li>Technical Leadership &amp; Collaborative Influence</li> <li>Operational Excellence &amp; Adaptive Delivery</li> <li>Strategic Problem-Solving &amp; Architecture Design</li> <li>Fluent professional English; Arabic is an advantage</li> </ul> <p> </p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an Assistant Resident Engineer to join our team for an exciting port project in Kuwait. In this role, you will be responsible for supporting the Resident Engineer in overseeing project management, construction management, and supervision services for a major port project. Assist in managing day-to-day project activities, ensuring adherence to schedules, budgets, and quality standards Conduct regular site inspections and monitor construction progress Collaborate with all project stakeholders to resolve technical issues and ensure project compliance Support the Resident Engineer in coordinating with local authorities and regulatory bodies Participate in project meetings and contribute to decision-making processes Ensure compliance with safety regulations and environmental standards Assist in quality control and quality assurance activities throughout the project lifecycle Monitor and report on project risks, recommending mitigation strategies as needed</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree in Civil Engineering or related field Minimum of 12 years of experience in civil engineering, preferably in port projects or marine construction Strong knowledge of project management principles and construction management techniques Excellent skills in Microsoft Office Suite, including Project and Excel Strong analytical and problem-solving skills Excellent organizational and time management abilities Effective communication and interpersonal skills Ability to work in a multicultural environment Willingness to relocate to Kuwait for the duration of the project</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Leidos Defense Sector is hiring a <b>Field Service Technician</b> to support US Army Central G2. The program provides IT repair, maintenance, operations, logistics, and engineering services to help ensure secure, reliable, and uninterrupted availability of Army Military Intelligence Enterprise IT Systems as well as network administration support for an organization comprised mostly of a Microsoft Enterprise software environment residing on multiple networks.</p> <p> </p> <p>The Field Service Technician will be part of a dynamic team supporting customers throughout the ARCENT Area of Responsibility including both U.S. and coalition personnel.</p> <p> </p> <p>This is a deployed position located at Camp Arifjan, Kuwait.</p> <p> </p> <p>Duty hours are 12 hours per day, 7 days per week, and are subject to local labor laws. This position also requires 24/7 on call availability, including weekends and holidays.</p> <p> </p> <p> <b>Primary Responsibilities: </b> </p> <ul> <li>Provide Tier I and II customer service support as part of a service desk team across multiple networks, facilities, and locations (in-person telephonically or electronically submitted via ticket system); escalate incidents to higher Tier II or Tier III when required</li> <li>Complete basic and advanced hardware and infrastructure work including cable management at both workstations and in-server rooms, workstation installations, checking UPS systems, replacing hardware components of laptops &amp; desktops, basic printer maintenance, etc.</li> <li>Remediate problems with Windows desktops, laptops, printers, digital senders, video teleconference systems, VOIPs</li> <li>Execute basic Active Directory tasks and manage NTFS permissions such as share folder access, etc.</li> <li>Troubleshoot, diagnose, and resolve software issues with MS Office and Outlook, Adobe, Java, PKIs</li> <li>Apply patches and updates to workstations both locally and remotely, and using PowerShell, RDP</li> <li>Track all work in designated incident database tools &amp; systems (such as Remedy), ensure tickets are completed accurately and in a timely manner</li> <li>Support In &amp; Out process users, including creating accounts, setting up workstations, mapping drives, and printers</li> <li>Schedule and de-conflict Video Teleconferences</li> <li>Conduct site surveys and installation of IT equipment</li> <li>Participate in or lead special projects and day to day operations as needed or assigned by the site lead, including surging to alternate locations for customer requirements or to backfill personnel during R&amp;R or other absences</li> </ul> <p> </p> <p> <b>Basic Qualifications:</b> </p> <ul> <li>Bachelor's degree and 2+ years of prior relevant experience. Additional years of experience may be considered in lieu of a degree.</li> <li>Active TS/SCI security clearance (in DISS).</li> <li>Active 8570 IAT II (or higher) Baseline Certification, such as: Security+|ce.</li> <li>Active one Windows Computing Environment certification, such as: MS-900: Microsoft 365 Fundamentals, MD-102: Microsoft 365: Endpoint administrator Associate, etc.</li> <li>Experience resolving Tier I and II hardware, software and application issues (printer, basic network (LAN), scheduling &amp; troubleshooting video tele-conferences (VTCs).</li> <li>Working knowledge of Active Directory Users &amp; Computers, security groups/NTFS permissions, Cisco network/LAN principles, MS Windows 11, MS Office, desktop &amp; laptop hardware, etc.</li> <li>Ability to work 12-hour shifts on-site, 7 days per week.</li> <li>On-call availability 24x7, including weekends and holidays.</li> <li>Current U.S. passport with at least 36 months validity and 5 blank pages.</li> <li>Must successfully complete CRC processing and medical screening and be designated fit for deployment (including medical tests and BMI analysis).</li> <li>Must obtain and maintain host nation work visa, including required local/regional medical testing.</li> <li>Must be willing to live and work in the State of Kuwait or deploy to austere forward locations as required.</li> <li>Must comply with all corporate policies, local site policies, host nation laws, customs, and courtesies.</li> </ul> <p> </p> <p> <b>Preferred Qualifications: </b> </p> <ul> <li>Active IT certification, such as: AZ-802:Windows Server hybrid administrator, CCNA, VCTA, NCDA.</li> <li>Experience with US Intelligence networks and organizations in South-West Asia or on a Camp Arifjan service desk.</li> </ul> <p> </p> <p>AMSOPP1</p> <p> </p> <p>If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 and moving faster than anyone else dares.</p> <u> <b>Original Posting:</b> </u> June 12, 2026<div> <div> <div> <div> <div> <div> <div> <p> </p> <p>For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.</p> </div> </div> </div> </div> </div> </div> </div> <div> </div> <p> </p> <b> <u>Pay Range:</u> </b> Pay Range $59,150.00 - $106,925.00<p> </p> <p>The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.</p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Construction Manager provides on-site administrative, technical management, and leadership for the design and contract compliance, and construction of large multi-million-dollar Government funded construction project at a specified project site. Principal Accountabilities (Typical duties include the following, although specific duties vary by assignment or contract.) • Supervises the total construction effort to ensure the project is constructed in accordance with the design, budget and schedule. • Ensures construction adheres to construction specifications. • Reads, interprets, and deciphers all construction documents (schedules, specifications, blueprints, schematics, diagrams, etc. Provides technical assistance and interpretation of drawings, recommending construction methods and equipment as required. • Logs, references, distributes, and files all related correspondence, drawings, and documents. • Plans, coordinates, and supervises on-site functions (scheduling, material control, and day-to-day direction of on-site administrative staff, when assigned). • Ensures all project staff and subcontractors employed to execute engineering-construction tasks conform to applicable work rules and SOPs for security, safety, environmental controls, hazardous materials and underground utilities. • Visits construction sites and submits required construction reports to monitor progress against schedule/timelines. • Cooperates with visiting Government and DI personnel conducting official inspection visits and surveys and participate in their briefing or orientation. • Provides leadership, mentoring, and professional development to assigned staff. • Manages the work of teams to procure and construct work. • Leads, manages and mentors the assigned technical and professional staff responsible for the facilities construction from contract development through construction completion. • Attends meetings as required including design and construction reviews and construction kickoff meetings. • Performs other qualified duties as assigned. Knowledge &amp; Skills • Knowledge of cost controls, contractual and project management of international construction projects. • Shall also be versed in the International Building Code, NFPA Fire Codes and the NEC in addition to general construction practices. • Knowledge of construction materials, processes, techniques, and methods. • Thorough knowledge of the Federal Acquisition Regulation (FAR), Defense Federal Acquisition Regulations (DFAR) and related federal and state legislation and regulations. • Knowledge of Service Contract Act and Truth in Negotiations Act. • Knowledge of international business management and International Traffic in Arms Regulations (ITAR) if required for contract. • Knowledge and understanding of the Foreign Corrupt Practices Act (FCPA). • Knowledge of accounting practices including DynCorp s disclosed accounting practices. • Effective leadership and interpersonal skills. • Requires a thorough knowledge of practices, standards, and regulations as they apply to the design and construction of the regional camps forward operating bases, and major civil projects. • Excellent communication and organizational skills are essential. • Able to use Project and Construction Management planning and reporting tools such as Microsoft Project and Primavera. Experience &amp; Education • HS diploma or equivalent • Bachelor s degree in engineering, construction technology, or construction management (preferred). • Must be able to obtain and maintain a Secret Clearance; note US Citizenship is required to obtain a Secret Clearance. • Minimum seven (7) years of construction field experience in all phases of Civil and Building Construction or a two (2) year associate degree in construction management or related field and five (5) years of field experience. • Experience with mechanical projects (HVAC, plumbing) and electrical projects. • Experience in civil/structural projects and hold an American Concrete Institute (ACI) concrete testing certification. • Construction inspector shall also be versed in the International Building Code (IBC), NFPA Fire Codes, British Standard (BS) Electrical Code, and the National Electric Code (NEC) in addition to general construction practices. • Must be able to read, interpret, and decipher all construction documents (schedules, specifications, blueprints, schematics, diagrams, and related documents); analyze procedures to identify deficiencies, review time/cost estimates, monitor project phasing and ensure adherence to approved safety standards, observe and inspect ongoing construction work, oversee construction record keeping activities, recommend payments to contractors, recommend change orders, review proposed change orders submitted by construction contractors, prepare and submit reports, and keep a daily log of all activities, weather conditions and work quantities. • An EIT or Professional Certification/Project Management Certification is desired. • Additional knowledge/skills may be required by contract or assignment. Physical Requirements/Working Environment • Works in a normal office environment with controlled temperature and lighting conditions. • May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>HS diploma or equivalent</li><li>Bachelor s degree in engineering, construction technology, or construction management (preferred).</li><li>Must be able to obtain and maintain a Secret Clearance; note US Citizenship is required to obtain a Secret Clearance.</li><li>Minimum seven (7) years of construction field experience in all phases of Civil and Building Construction or a two (2) year associate degree in construction management or related field and five (5) years of field experience.</li><li>Experience with mechanical projects (HVAC, plumbing) and electrical projects.</li><li>Experience in civil/structural projects and hold an American Concrete Institute (ACI) concrete testing certification.</li><li>Construction inspector shall also be versed in the International Building Code (IBC), NFPA Fire Codes, British Standard (BS) Electrical Code, and the National Electric Code (NEC) in addition to general construction practices.</li><li>Must be able to read, interpret, and decipher all construction documents (schedules, specifications, blueprints, schematics, diagrams, and related documents); analyze procedures to identify deficiencies, review time/cost estimates, monitor project phasing and ensure adherence to approved safety standards, observe and inspect ongoing construction work, oversee construction record keeping activities, recommend payments to contractors, recommend change orders, review proposed change orders submitted by construction contractors, prepare and submit reports, and keep a daily log of all activities, weather conditions and work quantities.</li><li>An EIT or Professional Certification/Project Management Certification is desired.</li><li>Additional knowledge/skills may be required by contract or assignment.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Serves as a senior-level satellite communications subject matter expert responsible for advanced installation, configuration, troubleshooting, and sustainment of complex SATCOM systems. Provides technical leadership and oversight for mission-critical communications infrastructure. Lead the installation, operation, maintenance, and troubleshooting of advanced satellite communications systems supporting voice, video, RF, and data networks.Design, configure, and optimize SATCOM solutions in accordance with mission and task-order requirements.Diagnose and resolve complex technical issues involving satellite terminals, modems, and RF systems.Provide technical leadership, mentorship, and oversight to junior technicians.Exercise independent judgment in resolving system-level issues and implementing corrective actions.Support coordination with vendors, engineers, and government stakeholders.Ensure compliance with all security, safety, and operational standards.Maintain detailed technical documentation and reporting for systems and activities.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must meet certification requirements specified in the applicable SPIN-C or individual task order.</li><li>Clearance: Secret</li><li>General Experience: 5+ years of hands-on experience supporting installation, maintenance, repair, and troubleshooting of communications systems.</li><li>Demonstrated ability to solve complex technical problems and understand interrelationships of communications circuits and systems.</li><li>Experience providing technical leadership and supervision.</li><li>Specialized Experience: Expert-level experience with DSCS or commercial satellite terminals, including: X-, C-, Ka-, Ku-band and Tri-band satellite terminals FDMA, TDMA, and IP-based satellite modems</li></ul><p></p></section>

<p>About the Role: We are seeking an experienced and hands-on Site Supervisor to oversee daily marine construction activities including dredging, piling, rock filling, quay wall construction, and subsea pipeline support works. The ideal candidate will have strong supervisory skills, practical knowledge of marine operations, and the ability to manage site crews, equipment, and subcontractors to ensure safe and efficient project execution. Key Responsibilities: • Supervise daily marine construction activities including dredging, piling, rock dumping, quay wall construction, and pipeline support works • Manage site crews including foremen, operators, riggers, and general workers; assign tasks and monitor productivity • Ensure all activities comply with approved method statements, drawings, specifications, and safety standards • Coordinate with project engineers, superintendents, and subcontractors for smooth execution of marine works • Monitor marine plant and equipment including barges, excavators, cranes, tugs, and dredgers • Conduct daily pre-start inspections of equipment and ensure all machinery is in safe working condition • Enforce HSE protocols including permits, toolbox talks, PPE compliance, and emergency procedures • Monitor material deliveries including rock, aggregates, concrete, and steel; ensure proper handling and storage • Maintain accurate daily records including work progress, manpower, equipment usage, and materials consumed • Report delays, incidents, or technical issues to the Construction Manager or Project Engineer • Liaise with survey teams for positioning, bathymetry, and as-built verification • Ensure vessels and barges are properly moored, secured, and compliant with safety regulations • Coordinate with marine coordinators for vessel movements and logistics • Conduct quality inspections to ensure work meets project specifications • Participate in daily progress meetings and provide input on construction sequences • Mentor and guide junior staff and crew members • Ensure site housekeeping and organization at all times • Assist in preparing daily and weekly progress reports for project management</p><p>Qualifications & Experience: • Diploma or certificate in Civil Engineering, Marine Engineering, Nautical Science, or related field • Minimum 5-7 years of experience as a Site Supervisor in marine construction, dredging, or offshore projects • Strong knowledge of marine construction methods including piling, dredging, rock filling, concrete works, and subsea operations • Experience with marine equipment including barges, excavators, cranes, dredgers, and tugs • Understanding of safety regulations including SOLAS, MARPOL, and local marine requirements • Valid offshore safety certifications (BOSIET/HUET) preferred if working offshore • Familiarity with permit-to-work systems and risk assessment procedures • Proficiency in MS Office; knowledge of planning software is an advantage • Fluency in English; knowledge of Hindi/Urdu or Arabic is a plus • Valid driver's license is preferred Required Skills: • Strong leadership and team management abilities • Effective communication and coordination skills • Problem-solving for operational and technical issues • Attention to detail for quality and safety compliance • Ability to work under pressure and meet deadlines • Physical fitness for on-site work in marine environments • Ability to read and interpret construction drawings and specifications</p>

<p>About the Role: We are seeking an experienced and hands-on Site Supervisor to oversee daily marine construction activities including dredging, piling, rock filling, quay wall construction, and subsea pipeline support works. The ideal candidate will have strong supervisory skills, practical knowledge of marine operations, and the ability to manage site crews, equipment, and subcontractors to ensure safe and efficient project execution. Key Responsibilities: • Supervise daily marine construction activities including dredging, piling, rock dumping, quay wall construction, and pipeline support works • Manage site crews including foremen, operators, riggers, and general workers; assign tasks and monitor productivity • Ensure all activities comply with approved method statements, drawings, specifications, and safety standards • Coordinate with project engineers, superintendents, and subcontractors for smooth execution of marine works • Monitor marine plant and equipment including barges, excavators, cranes, tugs, and dredgers • Conduct daily pre-start inspections of equipment and ensure all machinery is in safe working condition • Enforce HSE protocols including permits, toolbox talks, PPE compliance, and emergency procedures • Monitor material deliveries including rock, aggregates, concrete, and steel; ensure proper handling and storage • Maintain accurate daily records including work progress, manpower, equipment usage, and materials consumed • Report delays, incidents, or technical issues to the Construction Manager or Project Engineer • Liaise with survey teams for positioning, bathymetry, and as-built verification • Ensure vessels and barges are properly moored, secured, and compliant with safety regulations • Coordinate with marine coordinators for vessel movements and logistics • Conduct quality inspections to ensure work meets project specifications • Participate in daily progress meetings and provide input on construction sequences • Mentor and guide junior staff and crew members • Ensure site housekeeping and organization at all times • Assist in preparing daily and weekly progress reports for project management</p><p>Qualifications & Experience: • Diploma or certificate in Civil Engineering, Marine Engineering, Nautical Science, or related field • Minimum 5-7 years of experience as a Site Supervisor in marine construction, dredging, or offshore projects • Strong knowledge of marine construction methods including piling, dredging, rock filling, concrete works, and subsea operations • Experience with marine equipment including barges, excavators, cranes, dredgers, and tugs • Understanding of safety regulations including SOLAS, MARPOL, and local marine requirements • Valid offshore safety certifications (BOSIET/HUET) preferred if working offshore • Familiarity with permit-to-work systems and risk assessment procedures • Proficiency in MS Office; knowledge of planning software is an advantage • Fluency in English; knowledge of Hindi/Urdu or Arabic is a plus • Valid driver's license is preferred Required Skills: • Strong leadership and team management abilities • Effective communication and coordination skills • Problem-solving for operational and technical issues • Attention to detail for quality and safety compliance • Ability to work under pressure and meet deadlines • Physical fitness for on-site work in marine environments • Ability to read and interpret construction drawings and specifications</p>

<p><h4>Division / Project</h4> <p>KBR’s Sustainable Technology Solutions (STS) group is looking for an HSE Engineer for a 5-year PMC contract for the supply of programme management services with Kuwait Oil Company. The contract serves to support KOC to achieve its objectives of reaching optimum capacity in its oilfields and enhancing its facilities by the most efficient and economical means available.</p> <p>The contract aims to provide project management, coordination, planning, design, engineering, construction management, contracting, procurement, project controls, and other services for construction of new oil field facilities, upgrading of existing facilities, and transfer of technology.</p> <h4>Primary Objectives</h4> <ul> <li>Coordinate implementation of the KOC PMC safety policies, HSE management system, and project-specific HSE management plans as they apply to the project.</li> <li>Ensure that the site complies with the relevant HSE legislation and KOC HSE requirements.</li> <li>Develop and implement the project HSE management system.</li> <li>Develop and maintain statistical data for the project.</li> <li>Prepare reports as required for the HSEQ manager.</li> </ul> <h4>Responsibilities</h4> <ul> <li>Monitor the EPC contractor HSE management system and provide advice and assistance to EPC HSE managers to ensure consistent compliance and reduce risk to project employees and the environment.</li> <li>Ensure the EPC contractors develop, implement, and maintain a specific project risk management plan.</li> <li>Ensure EPC contractor subcontractor selection (ITB) processes are developed and implemented timely in accordance with KOC expectations.</li> <li>Provide advice and guidance to the EPC contractor management team on HSE issues through interpretation of KOC policies and statutory requirements.</li> <li>Ensure EPC contractors establish and maintain statistical data concerning all matters of health and safety and training programs to provide a basis for further health and safety activities and highlight trends for future action.</li> <li>Monitor compliance with all Kuwait legislative requirements including dissemination of information to PMC and EPC managers and employees regarding amendments or additions to requirements as they come into effect.</li> <li>Review EPC contractor safety management system and advise on required changes.</li> <li>Develop and maintain professional relationships with KOC, regulatory bodies, and EPC contractors to foster the professional image of KBR.</li> <li>Visit the project site regularly to ensure interest and awareness of HSE is maintained; conduct regular safety talks and safety training sessions relative to the nature of activities being undertaken.</li> <li>Proactively visit site and, with the EPC contractor, implement safety measures to promote and ensure safe work practices.</li> <li>Ensure quality safety observation program is implemented and maintained on each site/project and ensure follow-up on findings.</li> <li>Assist EPC contractor construction management personnel in identifying hazards and in planning and organizing work to maintain a safe working environment.</li> <li>Assist EPC subcontractor safety advisors and site management in the development and revision of specific site safety programmes.</li> <li>Maintain an HS&E audit and assessment program for the location.</li> <li>Carry out regular inspections of work areas with the respective EPC contractor line manager and HSE representative and prepare reports.</li> <li>Disseminate safety information throughout the workplace via bulletin boards, posters, newsletters, etc.</li> <li>Assist EPC contractor line management and construction supervisors in accident investigation processes and report accordingly.</li> <li>Develop and implement safety initiatives to continually improve, achieve, and maintain stated safety performance and objectives.</li> <li>Ensure HSE safety inductions are undertaken in accordance with the EPC contractor SMS requirements for all new employees of the company and its subcontractors.</li> <li>Monitor the availability and use of safety apparel and equipment.</li> <li>Provide advice to EPC subcontractor supervision on the development of project-specific procedures and Job Safety Analysis (JSA) training.</li> <li>Advise subcontractor supervisory staff and employees in the implementation of strategies to identify and control potential hazards and in the use of the hierarchy of controls.</li> <li>Ensure all lines of communication on HSE matters remain open and effective between all parties, particularly KOC, KBR, EPC contractors, and their subcontractors.</li> </ul> <h4>Qualifications including Required Education, Experience, & Skills</h4> <ul> <li>Bachelor’s degree in engineering.</li> <li>Minimum 8 years total post-graduation experience.</li> <li>Minimum 5 years oil and gas post-graduation experience.</li> <li>Minimum 5 years’ experience in an HSE engineer role.</li> <li>Practical experience with HSE management systems, reporting, and audit procedures.</li> <li>Ability to develop, update, and maintain in-house procedures.</li> <li>Must be conversant with local and international safety standards and norms.</li> <li>Practical experience of design, construction, commissioning, and maintenance aspects of oil and gas installations.</li> <li>Decarbonization, energy transition, and sustainability knowledge.</li> </ul> <p><strong>Belong. Connect. Grow.</strong></p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking Electrical Superintendents for deep drilling onshore rigs for our client in Kuwait. Position Overview: The Electrical Superintendent is responsible for leading and supervising all electrical maintenance activities across assigned onshore deep drilling rigs, ensuring safe, reliable, and efficient operation of rig electrical systems. Key Responsibilities Supervise and coordinate all electrical maintenance activities on drilling rigs, including preventive, predictive, and corrective maintenance. Ensure reliable operation of rig power generation, distribution systems, and drilling electrical equipment. Troubleshoot and resolve complex electrical and control system failures in a timely manner. Oversee maintenance of SCR/AC drive systems, VFDs, MCCs, PLCs, and rig instrumentation systems. Ensure proper functioning of critical equipment such as top drives, drawworks, mud pumps, and auxiliary systems. Plan and execute electrical maintenance schedules in coordination with rig and maintenance management. Monitor equipment performance and ensure high standards of reliability and operational readiness. Ensure compliance with OEM guidelines, maintenance procedures, and company technical standards. Maintain accurate maintenance records using CMMS or other maintenance tracking systems. Manage electrical spare parts usage and support inventory control processes. HSE Responsibilities Enforce strict adherence to electrical safety standards and company HSE policies. Ensure compliance with Permit-to-Work (PTW), Lockout/Tagout (LOTO), and isolation procedures. Conduct and participate in risk assessments and toolbox talks. Support incident investigations and implementation of corrective actions. Promote a strong safety culture across all rig electrical operations. Leadership &amp; Coordination Supervise and mentor rig electricians and junior electrical staff. Provide technical guidance and on-the-job training to improve workforce competency. Coordinate with Mechanical, Drilling, and Maintenance teams to ensure smooth operations. Support mobilization, commissioning, and startup of rigs when required.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Diploma or Bachelor's degree in Electrical Engineering or equivalent technical qualification. Candidates from Canada, United States, Europe, Eastern Europe, Australia, China are preferred. Experience of 8+ years in oil &amp; gas drilling with 3 5 years in a supervisory role on onshore drilling rigs. Strong hands-on experience with SCR/AC drilling rigs in deep drilling operations. GCC/Middle East experience is highly preferred.</p><p></p></section>

<p><h4>Job Description</h4> <p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Conduct the training and examination on all NDT methods to certify and to re-certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.</p> <p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p> <p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p> <p>Establish radiation areas for radiographic operations.</p> <p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p> <p>Perform nondestructive inspection on structures, components, and systems.</p> <p>Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p> <p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p> <p>Operate, maintain, and inspect nondestructive equipment.</p> <p>Perform operator maintenance and service inspections on shop equipment and tools.</p> <p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p> <p>Perform silver recovery functions.</p> <p>Handle and dispose of hazardous waste and materials.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum Requirements:</h4> <ul> <li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li> <li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li> <li>Three (3) years’ experience as a Non Destructive Inspection (NDI).</li> <li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/DIDC Training).</li> <li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li> </ul> <h4>Security Clearance Requirements:</h4> <ul> <li>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance.</li> <li>Must be able to obtain and maintain facility credentials/authorization.</li> <li>US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li> </ul> <h4>Additional and Preferred Qualifications:</h4> <ul> <li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li> <li>Capable of assuming technical responsibility for the NDT facility and staff.</li> <li>Capable of selecting the method and technique for a specific inspection.</li> <li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li> <li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li> <li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical Requirements/Working Environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Conduct the training and examination on all NDT methods to certify and to re-certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.</p> <p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p> <p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p> <p>Establish radiation areas for radiographic operations.</p> <p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p> <p>Perform nondestructive inspection on structures, components, and systems.</p> <p>Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p> <p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p> <p>Operate, maintain, and inspect nondestructive equipment.</p> <p>Perform operator maintenance and service inspections on shop equipment and tools.</p> <p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p> <p>Perform silver recovery functions.</p> <p>Handle and dispose of hazardous waste and materials.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum requirements</h4> <p>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</p> <p>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</p> <p>Three (3) years’ experience as a Non Destructive Inspection (NDI).</p> <p>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/DIDC Training).</p> <h4>Security clearance requirements</h4> <p>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a clearance and for facility credentials/authorization to work at this facility.</p> <h4>Additional and preferred qualifications</h4> <ul> <li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li> <li>Capable of assuming technical responsibility for the NDT facility and staff.</li> <li>Capable of selecting the method and technique for a specific inspection.</li> <li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li> <li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li> <li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for an experienced Quality Controller who will be responsible for checking the quality of all incoming and outgoing material and products as well as the production procedures. You will be a firm advocate of quality in our business. The ideal candidate will possess a trained eye for detail and will be reliable and committed. In depth knowledge and comprehension of quality standards is essential. The goal is to ensure that our products are made of flawless materials with well-functioning equipment. That way our customers will enjoy high-quality service so that we can achieve long-term success.</p><p>Main Responsibilities</p><ul><li>Inspect procedures of the entire production cycle (from purchasing to customer delivery) to ensure they are efficient and comply with Food Safety &amp; Quality standards.</li><li>Approve incoming materials by confirming specifications, conducting a visual and measurement test, and rejecting and returning unacceptable materials.</li><li>Approve in-process production by confirming required specifications, conducting visual and measurement tests, and communicating the required adjustments to the concerned managers.</li><li>Maintain records of testing, information, and various metrics such as the number of defective products per day, kitchen inspection results, Hygiene &amp; Sanitation Inspection, etc.</li><li>Monitor the use of equipment to ensure it is safe and well-maintained and report any that doesn t meet the requirements.</li><li>Select output samples and check them using appropriate methods (measuring dimensions, testing functionality, comparing to specifications, etc.)</li><li>Conduct staff awareness training sessions on food Safety &amp; quality</li><li>Support the team to develop and implement a food safety &amp; quality management system.</li><li>Address customer complaints by conducting a thorough investigation and preparing a corrective action plan for non-conformities.</li><li>Prepare and submit reports to the line manager.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must have had a minimum of 3 years of previous proven experience as a quality controller, or any relevant role in the catering or hotel industry.</li><li>Minimum Bachelor s Degree from a Food Background (Food Technology/Food Science/Microbiology/Bio-Chemistry etc.)</li><li>Must be HACCP certified with a Level 03 as a minimum requirement.</li><li>Familiarity with quality testing machines and systems.</li><li>Proficiency in MS Office.</li><li>Strong verbal and written English language skills.</li><li>Possesses a confident, firm, and pleasant personality that can work well with a team.</li><li>Currently located in Kuwait.</li><li>Familiar with Kuwait's rules and regulations as per the municipality/MOH.</li></ul><p></p></section>

<p>About the Role: We are seeking a competent Site Engineer specializing in civil pipeline works for marine GRP (Glass Reinforced Plastic) pipe installations. The ideal candidate will be responsible for supervising the installation, testing, and commissioning of GRP pipelines in marine and offshore environments, ensuring compliance with project specifications, international standards, and safety requirements. Key Responsibilities: • Supervise and coordinate daily pipeline installation activities including trenching, pipe laying, jointing, lamination, and backfilling for marine GRP pipelines • Ensure all GRP pipe installation works comply with approved drawings, method statements, specifications, and international standards (ISO 14692, AWWA M45) • Monitor trench excavation, dewatering, pipe bedding, and backfilling operations in accordance with project requirements • Supervise GRP pipe jointing and lamination procedures including adhesive bonding, coupling installation, and flange bolting • Coordinate with survey teams for pipeline route alignment, setting out, and as-built verification • Conduct site inspections and quality checks to verify adherence to specifications, safety regulations, and environmental standards • Review and interpret isometric drawings, spool drawings, and pipeline alignment sheets • Prepare and submit inspection requests (RFIs), method statements, and risk assessments • Monitor material deliveries including GRP pipes, fittings, couplings, and consumables; ensure proper handling and storage • Liaise with clients, consultants, subcontractors, and QAQC teams for inspections and approvals • Maintain accurate daily records including progress reports, manpower, equipment usage, and material consumption • Enforce HSE protocols including permits, toolbox talks, PPE compliance, and emergency procedures • Assist in pre-commissioning and commissioning activities including hydrotesting, flushing, and pressure testing • Prepare test packs and maintain documentation for pipeline testing and handover • Report delays, technical issues, or incidents to the Project Manager or Construction Manager • Provide technical guidance to site supervisors, foremen, and pipeline installation crews</p><p>Qualifications & Experience: Bachelor's degree in Civil Engineering, Mechanical Engineering, or related field Minimum 5+ years of experience in pipeline installation, with specific experience in GRP/FRP piping for marine or offshore projects Strong knowledge of GRP pipe materials, jointing methods (adhesive bonded, coupling), and lamination procedures Familiarity with international standards including ISO 14692 (GRP piping for offshore applications) and AWWA M45 • Experience with marine pipeline installation methods including trenching, floating installation, or underwater pull-in • Proficiency in MS Office, AutoCAD, and project management software • Knowledge of hydrotesting, pressure testing, and pipeline commissioning procedures • Valid safety certifications (NEBOSH, IOSH, OSHA) preferred • Offshore survival certificates (BOSIET/HUET) if required • Fluency in English; Arabic or Hindi/Urdu is a plus Required Skills: • Strong technical knowledge of GRP pipeline installation in marine environments • Excellent supervision and coordination abilities • Attention to detail for quality and compliance • Good communication and report writing skills • Problem-solving for site and technical issues • Ability to work under pressure and meet project deadlines • Team collaboration with site staff, subcontractors, and management</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION SUMMARY Operate and monitor washing, dry cleaning, and drying machinery, including adding chemicals and cleaning lint traps. Identify stained or damaged items and determine status for repair, spot treatment, rewash, or discard. Inspect cleanliness of articles removed from the washer, dryer, or dry-cleaning machines and place in clean linen carts. Set dryers to designated times and temperatures based on fabrics contained in load. Remove lint and debris from dryer screens, dry cleaning filters, and drain trap after each load. Fold cleaned articles into designated size, either by hand or using folding machine. Maintain accurate records of items laundered. Follow all company safety and security policies and procedures; report accidents, injuries, and unsafe work conditions to manager; complete safety training and certifications. Follow all company policies and procedures; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Visually inspect tools, equipment, or machines (e.g., to identify defects). Stand, sit, or walk for an extended period of time or for an entire work shift. Move, lift, carry, push, pull, and place objects weighing less than or equal to 25 pounds without assistance. Move through narrow, confined, or elevated spaces. Move over sloping, uneven, or slippery surfaces as well as up and down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>No high school diploma or G.E.D. equivalent.</li><li>No related work experience.</li><li>No supervisory experience.</li><li>None</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The Supply Technician II assists with documents pertaining to work orders completed within the MST (Maintenance Support Team) and is responsible for the OMDAC-SWACA calibration program. Provides weekly/monthly maintenance work order reports within the section and performs technical supply management tasks (e.g., inventory management, storage management, maintenance tagging of equipment). Has knowledge of supply operations and program requirements and the ability to apply established supply policies, day-to-day servicing techniques, regulations, and procedures. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Ability to obtain a National Agency Check with Inquires (NACI) to obtain a Common Access Card (CAC).</li><li>Ability to obtain and maintain a Secret level security clearance is preferred.</li><li>One-year related experience may be substituted for one year of education, if degree is required.</li><li>High School diploma or GED required.</li><li>Some college preferred.</li><li>IASSC: Lean Six Sigma: Green Belt preferred</li><li>One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience.</li><li>A minimum of five years experience in Supply operations.</li><li>Experience with automated supply management systems.</li><li>Must be able to obtain a forklift license.</li><li>Experience with a customer service-oriented company.</li><li>At least two years of supervisory or lead experience is preferred.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Supervise and lead a team of heavy vehicle technicians and mechanics. Allocate daily jobs and monitor work progress to ensure timely completion. Diagnose complex mechanical, electrical, hydraulic, pneumatic, and transmission faults. Oversee repair, maintenance, and overhaul of heavy trucks, buses, trailers, construction equipment, and commercial vehicles. Ensure all repairs are carried out according to manufacturer specifications and company quality standards. Conduct final inspection and testing before releasing vehicles to operations. Plan preventive maintenance schedules to minimize vehicle downtime. Coordinate with the Workshop Manager regarding manpower, spare parts, tools, and repair priorities. Monitor technician productivity and provide technical guidance and on-the-job training. Ensure proper use and maintenance of workshop tools, diagnostic equipment, and special service tools. Prepare job cards, maintenance reports, service records, and daily progress reports. Identify spare parts requirements and coordinate with the stores department for timely availability. Ensure compliance with safety regulations, environmental standards, and workshop housekeeping (5S). Investigate recurring vehicle failures and recommend corrective and preventive actions. Attend vehicle breakdowns and provide technical support when required. Ensure all work is completed within the allocated labor hours and budget. Enforce company policies, discipline, and safe working practices among workshop staff. Coordinate with fleet operations to prioritize urgent vehicle repairs. Support continuous improvement initiatives to increase workshop efficiency and reduce repair costs.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Qualification: Diploma or B.Tech in Mechanical, Automobile Engineering, or a related field. Experience: 510 years in heavy vehicle maintenance, including at least 2 3 years in a supervisory or foreman role. GCC/Middle East workshop experience is highly preferred.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a Mechanical Maintenance Manager Residential with extensive maintenance leadership experience for our client in Kuwait. Position Overview: The Mechanical Maintenance Manager Residential will lead maintenance planning, execution, and reliability programs for drilling and support equipment while managing residential maintenance operations. Key Responsibilities: Maintenance Management: Lead preventive, predictive, and corrective maintenance programs. Develop maintenance strategies and optimize equipment reliability. Manage maintenance planning, scheduling, and resource allocation. Control maintenance budgets and contractor performance. Reliability &amp; Asset Management: Monitor equipment performance and implement reliability improvement initiatives. Lead root cause failure analysis and corrective action implementation. Ensure critical spare parts availability and inventory optimization. Compliance &amp; Safety: Ensure compliance with company HSE standards and maintenance procedures. Maintain maintenance documentation and certification records. Participate in audits and inspections. Leadership: Lead and supervise maintenance teams. Mentor personnel and develop technical competencies. Foster collaboration across departments and contractors.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Required Qualifications: Bachelor's Degree or Technical Diploma in Mechanical Engineering or related discipline. Minimum 8+ years of maintenance experience in drilling, heavy equipment, or oil and gas operations. At least 3 years in a maintenance leadership role. Strong knowledge of maintenance planning, reliability engineering, and CMMS systems. Excellent communication and leadership skills.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an Electrical Maintenance Manager - Residential for our client in Kuwait. Position Overview: The Electrical Maintenance Manager is responsible for planning, directing, and managing all electrical maintenance activities for a fleet of onshore drilling rigs and associated equipment. Key Responsibilities: Maintenance Management: Develop, implement, and continuously improve preventive, predictive, and corrective electrical maintenance programs for land drilling rigs. Ensure maximum reliability and availability of drilling electrical systems and associated equipment. Plan and supervise major electrical overhauls, rig upgrades, and refurbishment projects. Review equipment performance and implement reliability improvement initiatives. Monitor equipment failures and perform root cause failure analysis (RCFA) to eliminate recurring issues. Ensure maintenance activities comply with OEM recommendations and industry best practices. Fleet Support: Provide technical support to multiple onshore drilling rigs. Coordinate troubleshooting of complex electrical failures affecting drilling operations. Monitor rig electrical KPIs including equipment availability, MTBF, MTTR, and maintenance compliance. Conduct periodic inspections and audits of rig electrical systems. Standardize maintenance procedures across the drilling fleet. Equipments: Responsible for electrical maintenance of: SCR and AC/VFD drilling rigs, Rig power generation systems, Diesel generators, Motor Control Centers (MCC), Variable Frequency Drives (VFD), Silicon Controlled Rectifier (SCR) systems, Top Drive electrical systems, Drawworks electrical systems, Mud pump electrical systems, Rotary equipment, Air compressors, Lighting systems, Rig camp electrical distribution systems, High and low voltage distribution systems, UPS systems, PLC and control systems, Instrumentation interfaces, Emergency shutdown systems, Rig communication systems, Electrical protection systems. Planning &amp; Asset Management: Develop annual electrical maintenance plans and budgets. Manage spare parts inventory and critical electrical components. Coordinate procurement of electrical materials and services. Optimize maintenance costs while maintaining equipment reliability. Maintain accurate maintenance records using a Computerized Maintenance Management System (CMMS). Leadership: Lead, mentor, and supervise Electrical Superintendents, Electrical Supervisors, Electrical Engineers, and field electricians. Allocate manpower effectively across multiple drilling rigs. Conduct performance evaluations and competency assessments. Identify training needs and develop technical competency programs. HSE &amp; Compliance: Ensure compliance with company HSE policies and client requirements. Promote a strong electrical safety culture. Ensure compliance with: Lock Out/Tag Out (LOTO) Electrical isolation procedures Permit to Work (PTW) Hazard identification and risk assessment Safe electrical work practices Participate in incident investigations and implement corrective actions. Ensure compliance with applicable electrical codes and standards. Quality &amp; Continuous Improvement: Develop and update electrical maintenance procedures. Conduct reliability analysis and continuous improvement initiatives. Evaluate new technologies to improve drilling equipment reliability. Support rig commissioning, acceptance testing, and startup activities.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>Qualifications:</b></p><p>Bachelor's Degree in Electrical Engineering or equivalent. Professional certifications in electrical engineering or maintenance management are advantageous. Experience of 8+ years of electrical maintenance experience in the oil and gas drilling industry with minimum 5 years in a managerial or superintendent-level position. Candidates from Canada, United States, Europe, Eastern Europe, Australia, China are preferred. Experience managing electrical maintenance across multiple drilling rigs. Strong knowledge of AC and SCR drilling rig electrical systems. Experience working in GCC/Middle East drilling operations is highly desirable.</p><p></p></section>

<p><h4>Position summary</h4> <p>Enter and locate work-related information using computers and/or point of sale systems. Read and visually verify information in a variety of formats (e.g., small print). Transmit information or documents using a computer, mail, or facsimile machine. Exchange information with other employees using electronic devices (e.g., pagers and two-way radios, email). Stand, sit, or walk for an extended period of time or for an entire work shift.</p> <p>Follow all company safety and security policies and procedures; report accidents, injuries, and unsafe work conditions to manager; and complete safety training and certifications. Follow all company policies and procedures, ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist</p><p></p>