Security Camera Watch Jobs - Capital Governorate (Kuwait) Kuwait

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Rig Manager Deep Drilling We are currently looking for a Rig Manager Deep Drilling Land Rigs (3000 HP / HPHT) to join our client's operations in Kuwait. Position Overview: The Rig Manager Deep Drilling will be responsible for the safe, efficient, and cost-effective execution of drilling operations on deep drilling land rigs in Kuwait. The role will provide overall leadership for rig operations, ensuring operational excellence, equipment reliability, and compliance with company and regulatory requirements. Key Responsibilities: Rig Operations: Direct and oversee all drilling and rig operations to ensure safe and efficient execution. Ensure drilling activities are performed in accordance with approved drilling programs and operational procedures. Monitor rig performance and optimize operational efficiency while minimizing non-productive time (NPT). Coordinate daily drilling activities with Drilling Superintendents and onshore support teams. Ensure proper well control practices are maintained at all times. Operational Excellence: Drive continuous improvement initiatives to enhance drilling performance and equipment utilization. Monitor operational KPIs and implement corrective actions when required. Coordinate with maintenance teams to ensure timely repairs and preventive maintenance activities. Compliance &amp; Safety: Ensure compliance with company HSE policies, industry standards, and regulatory requirements. Promote a strong safety culture and ensure adherence to well control procedures. Lead incident investigations and implement corrective actions. Participate in audits, inspections, and emergency response activities. Leadership: Lead and supervise all rig personnel and contractors on site. Mentor and develop crew competency through training and coaching. Coordinate with Toolpushers, Drilling Engineers, service companies, and contractors. Foster effective collaboration within multicultural work environments.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's Degree or Technical Diploma in Petroleum, Mechanical Engineering, or related discipline.</li><li>Minimum 8+ years of drilling rig operations experience.</li><li>At least 3 years in a Rig Manager, Senior Toolpusher, or equivalent leadership role.</li><li>Extensive experience supporting deep drilling land rigs (3000HP, HPHT, and complex drilling operations).</li><li>Strong understanding of drilling operations, well control, and rig equipment.</li><li>Current IWCF or IADC WellSharp certification is preferred.</li><li>Excellent communication and leadership skills in English.</li><li>Candidates from Canada, United States, Europe, Eastern Europe, Australia, China are preferred.</li></ul><p></p></section>

<p><h4>Job summary</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance.</p> <p>Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements.</p> <p>USAF equivalent position is Munitions/Weapons Technician Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li> <li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li> <li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li> <li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li> <li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li> <li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li> <li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li> <li>Maintain weapons certification and currency.</li> <li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li> <li>Perform all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft munitions/weapons maintenance experience required.</li> <li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li> <li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Munitions/weapons experience within the last 10 years.</li> </ul> <h4>Compensation details:</h4> <p>34.62</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Original posting:</h4> <p>06/02/2026 - 06/06/2026</p> <p>Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p>The Non-Destruction Inspection Technician (NDI) II inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p><p>Determine test method and prepare fluids and parts for nondestructive inspection.</p><p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p><p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p><p>Establish radiation areas for radiographic operations.</p><p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p><p>Perform nondestructive inspection on structures, components, and systems.</p><p>Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrate testing, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p><p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p><p>Operate, maintain, and inspect nondestructive equipment.</p><p>Perform operator maintenance and service inspections on shop equipment and tools.</p><p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p><p>Perform silver recovery functions.</p><p>Handle and dispose of hazardous waste and materials.</p><p>Perform other qualified duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent required.</li><li>U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Completion of a initial Non Destructive Inspection Level II training Course and current basic qualification.</li><li>Three (3) or more years experience as an aviation inspector and a minimum of one year experience on the assigned(MDS) airframe . (UH60, AH64, CH47 )</li><li>Shall be trained and qualified per NAS 410 or ASNT-CP-189 to the level assigned.</li><li>Must be in possession of a U.S. Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</li><li>Must be a US Citizen.</li><li>Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust. ** US Citizenship is required to obtain a T1/CAC NACI Clearance.</li><li>Able to clear CENTCOM Medical requirements for deployment.</li><li>Ability to obtain and maintain Kuwait Visa</li><li>Previous experience in the maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components (UH60, AH64, CH47).</li><li>Have the skills and knowledge to set up and standardize equipment, conduct tests, interpret and evaluate for acceptance or rejection, and document.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and Level I personnel in the technique/method in which they are certified.</li><li>Familiar with the codes, standards, and other contractual documents that control the method as utilized by the employer.</li><li>Capable of developing written instructions from approved general procedures. Such instructions shall require final approval by a Level III.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul>

<p><h4>At Al Tayer Insignia</h4> <p>Your career is more than a job — it’s a journey into the heart of luxury retail. For over 40 years, we’ve partnered with the world’s most iconic brands, creating award-winning retail experiences across our boutiques, department stores, and leading online platforms. With stores and outlets across the GCC and a truly seamless omnichannel presence, we bring style, innovation, and heritage together. Here, you’ll join a diverse, customer-obsessed, passionate team that celebrates creativity, values individuality, and empowers you to grow. Join us on our journey, reimagining fashion and redefining the meaning of luxury in the region.</p> <h4>About us</h4> <p>As a leader in luxury retail in the Middle East, Al Tayer Group's retail division, Al Tayer Insignia, hosts a portfolio of some of the world’s best luxury brands in the fashion, jewellery, home, and department store categories. Complementing its position in luxury retail, Al Tayer Insignia has also built new frontiers in lifestyle retail, representing leading brands in the beauty, home, fashion, and hospitality sectors. Our brands include Bloomingdales, Harvey Nichols, and Armani to name just a few!</p> <h4>About the role</h4> <p>Deliver excellent customer service through: identifying customer needs, offering advice and demonstrating suitable products; building relationships with key customers and ensuring store standards are maintained in order to achieve sales targets and cultivate customer loyalty.</p> <h4>What you’ll be doing</h4> <p><strong>Functional roles & responsibilities</strong></p> <ul> <li>Welcome and greet every customer in a warm and friendly manner and demonstrate excellent customer service at all times.</li> <li>Identify customer needs through asking questions; confidently recommend and demonstrate appropriate products; recommend link products at every sale opportunity; close the sale.</li> <li>Receive cash or payment in any authorized modes from customers, issue receipts/bills against their purchase and provide professional cash point service.</li> <li>Handle customer complaints professionally and efficiently, in line with the company after sales policy, escalating to management if necessary.</li> <li>Demonstrate and maintain product knowledge, fashion trends, instore promotions at all times.</li> <li>Maintain personal grooming standards as advised by the Store Manager.</li> <li>Maintain clean and organized display, fitting rooms and stock areas.</li> <li>Check stock levels daily and inform of depleting stocks to the store manager in order to replenish and maintain optimum stock levels.</li> <li>Comply with all company policies and procedures including refund and exchange policy, security, health and safety policies etc.</li> <li>Recruit customers for the database, accurately entering their details on the POS system.</li> <li>Minimize exposure to stock loss through vigilance on sales floor and fitting room areas.</li> </ul> <h4>About you</h4> <p><strong>Education/certification and continued education</strong><br> High school qualification</p> <p><strong>Years of experience</strong><br> 3 to 4 years retail sales or customer service experience</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Onshore, Kuwait We are seeking an experienced Wellsite Geologist to join our team on an onshore project in the Middle East. This is a critical, on-site role responsible for delivering safe, efficient, and technically sound geological operations that support real-time decision-making and optimize well delivery. As the on-site geological authority, you will work closely with drilling, subsurface, and service teams to ensure accurate data acquisition, sound interpretation, and effective execution of the well programme. Key Responsibilities Act as the primary geological representative at the wellsite, providing real-time interpretation of geological data and early identification of drilling hazards. Ensure the quality, accuracy, and integrity of all geological data collected at the wellsite. Maintain clear, timely communication and data transfer between the rig site and onshore/office-based teams. Monitor lithology, formation tops, and drilling parameters to support casing/coring point decisions. Contribute to end-of-well reports, post-well analysis, and lessons-learned initiatives to drive continuous improvement. Ensure full compliance with company operational procedures, HSE standards, and industry best practices. Liaise with mud loggers, directional drillers, and other service providers to ensure integrated, high-quality operations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>University degree in Geology, Earth Sciences, or a related discipline.</li><li>Proven wellsite experience across both carbonate and clastic formations.</li><li>Working experience with Techlog / Petrel software.</li><li>Demonstrated skill in real-time pore pressure prediction (RTPP), with working knowledge of relevant RTPP software suites.</li><li>Strong understanding of drilling hazards (e.g., overpressure, wellbore instability, fluid losses) and their geological indicators.</li><li>Familiarity with LWD/MWD/ wireline data interpretation.</li><li>Excellent communication skills, with the ability to convey technical information clearly to multidisciplinary teams under time pressure.</li><li>Willingness and ability to work on an onshore rig-based rotation in Kuwait.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking Rig Electricians for deep drilling onshore rigs for our client in Kuwait. Key Responsibilities: Install new electrical equipment and systems as required, ensuring that installations are done in accordance with technical specifications and safety regulations. Run electrical wiring and conduit, install circuit breakers, panels, and other electrical infrastructure as needed. Test new installations to ensure proper operation and safety. Perform electrical maintenance and repairs on various equipment and systems. Conduct regular inspections to identify potential issues and develop preventative maintenance plans. Troubleshoot electrical problems and implement effective solutions. Collaborate with other departments to ensure electrical systems are integrated seamlessly. Maintain accurate records of electrical work and inspections. Comply with safety regulations and promote a culture of safety among the team. Respond to electrical emergencies, such as power outages or equipment failures, and take appropriate action to restore power and ensure safety. Participate in emergency drills and ensure readiness to address electrical issues in emergency situations. Stay up-to-date with industry trends and technological advancements. Maintain an adequate supply of parts for emergency repairs. Monitor the operational performance of the Company's equipment. Identify areas for improvement.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent and additional relevant electrical certifications or licenses.</li><li>Experience of 3+years as an Electrician in deep drilling land rigs is required.</li><li>Candidates from Canada, United States, Europe, Eastern Europe, Australia, China are preferred.</li><li>Strong knowledge of electrical systems, wiring, and equipment used in industrial or oil and gas settings.</li><li>Proficiency in diagnosing and repairing electrical issues.</li><li>Ability to read and interpret electrical schematics and diagrams.</li><li>Knowledge of safety regulations and best practices.</li><li>Ability to work in a fast-paced environment and handle multiple tasks.</li><li>Strong communication and interpersonal skills.</li><li>Willingness to work in various weather conditions and environments.</li></ul><p></p></section>

<p><h4>Position summary</h4> <p>Check figures, postings, and documents for correct entry, mathematical accuracy, and proper codes. Organize, secure, and maintain all files, records, cash, and cash equivalents in accordance with policies and procedures. Record, store, access, and/or analyze computerized financial information. Maintain accurate electronic spreadsheets for financial and accounting data. Classify, code, and summarize numerical and financial data to compile and keep financial records, using journals, ledgers, and/or computers. Prepare, maintain, and distribute statistical, financial, accounting, auditing, or payroll reports and tables. Complete period-end closing procedures and reports as specified. Prepare, review, reconcile, and issue bills, invoices, and account statements according to company procedures.</p> <p>Follow all company policies and procedures; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets; protect the privacy and security of guests and coworkers. Address guests' service needs in a professional, positive, and timely manner. Speak with others using clear and professional language; prepare and review written documents accurately and completely; answer telephones and emails using appropriate etiquette. Move, lift, carry, push, pull, and place objects weighing less than or equal to 10 pounds without assistance. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Perform other reasonable job duties as requested by supervisors.</p> <h4>Preferred qualifications</h4> <p><strong>Education:</strong> High school diploma or G.E.D. equivalent.<br> <strong>Related work experience:</strong> At least 1 year of related work experience.<br> <strong>Supervisory experience:</strong> No supervisory experience.<br> <strong>License or certification:</strong> None</p> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>At Courtyard, we’re passionate about better serving the needs of travelers everywhere. It’s what inspired us to create the first hotel designed specifically for business travelers, and it’s why the Courtyard experience today empowers our guests, no matter the purpose of their trip. We’re looking for achievers who are passionate about providing a guest experience that goes above and beyond, enjoy being part of a small yet ambitious team, and love learning how to always improve – all while having fun.</p> <p>In joining Courtyard, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p></p><p></p>

<p><h4>Position summary</h4> <p>Check figures, postings, and documents for correct entry, mathematical accuracy, and proper codes. Organize, secure, and maintain all files, records, cash and cash equivalents in accordance with policies and procedures. Record, store, access, and/or analyze computerized financial information. Maintain accurate electronic spreadsheets for financial and accounting data. Classify, code, and summarize numerical and financial data to compile and keep financial records, using journals, ledgers, and/or computers. Prepare, maintain, and distribute statistical, financial, accounting, auditing, or payroll reports and tables. Complete period-end closing procedures and reports as specified. Prepare, review, reconcile, and issue bills, invoices, and account statements according to company procedures.</p> <p>Follow all company policies and procedures; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets; protect the privacy and security of guests and coworkers. Address guests' service needs in a professional, positive, and timely manner. Speak with others using clear and professional language; prepare and review written documents accurately and completely; answer telephones and emails using appropriate etiquette. Move, lift, carry, push, pull, and place objects weighing less than or equal to 10 pounds without assistance. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Perform other reasonable job duties as requested by supervisors.</p> <h4>Preferred qualifications</h4> <p><strong>Education:</strong> High school diploma or G.E.D. equivalent.</p> <p><strong>Related work experience:</strong> At least 1 year of related work experience.</p> <p><strong>Supervisory experience:</strong> No supervisory experience.</p> <p><strong>License or certification:</strong> None</p> <p>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</p> <p>At Courtyard, we’re passionate about better serving the needs of travelers everywhere. It’s what inspired us to create the first hotel designed specifically for business travelers, and it’s why the Courtyard experience today empowers our guests, no matter the purpose of their trip. We’re looking for achievers who are passionate about providing a guest experience that goes above and beyond, enjoy being part of a small yet ambitious team, and love learning how to always improve – all while having fun.</p> <p>In joining Courtyard, you join a portfolio of brands with Marriott International. Be where you can do your best work, begin your purpose, belong to an amazing global team, and become the best version of you.</p></p><p></p>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Prepares weekly, monthly, quarterly, and annual utilization schedules for maintenance. Maintains proficiency in operations of the USAF Maintenance Information System including Core Automated Maintenance System (CAMS), Centralized Engine Management System (CEMS), and other maintenance management database library programs. Maintains equipment records in library files. Collects, reviews, and files documented information for planning and scheduling of various maintenance activities. Ensures accurate documentation is maintained for aircraft engines, munitions, missiles, AGE configurations, Time Compliance Technical Orders, time change items, and special inspections. USAF equivalent position is Aircraft Scheduling &amp; Documentation Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Assist in the preparations of the weekly, monthly, quarterly, and annual utilization schedules for maintenance.</li><li>Will oversee TCTO process for completion and proper documentation with IMDS and/or CEMS.</li><li>Maintains assigned aircraft/equipment records in database library files within IMDS and/or CEMS.</li><li>Assists in the collection, review, and filing of documented information for planning and scheduling of RPA maintenance activities.</li><li>Ensure accurate documentation is maintained for aircraft engines, munitions, missiles, AGE configurations, Time Compliance Technical Orders, time change items, and special inspections.</li><li>Performs all other duties as assigned or requested.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have High School diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one-year actual Aircraft Plans &amp; Scheduling experience required.</li><li>Must possess basic planning and organizational skills.</li><li>Must be able to work under deadlines with minimal supervision.</li><li>Must be able to gain/maintain CEMS access for Engine Management purposes.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must have a current/active U.S. Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul>

<p><h4>Position summary</h4> <p>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventive maintenance on tools and kitchen and mechanical room equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment and all utility shut-offs for buildings. Maintain maintenance inventory and requisition parts and supplies as needed. Communicate each day’s activities and problems that occur to the other shifts using approved communication programs and standards.</p> <p>Display basic knowledge or ability to acquire knowledge in the following categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building. Perform all surface preparation, painting, minor drywall and wood trim repair, light bulb and A/C filter replacement, and the complete and thorough cleanup of the painting or repair area.</p> <p>Test, troubleshoot, and perform basic repair on all types of equipment, plumbing (e.g., plunge toilets and unclog drains), electrical components including lamps, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and other guestroom items. Program TVs and perform general housekeeping and engineering-related inventory duties. Use the Lockout/Tagout system before performing any maintenance work. Perform repairs on interior and exterior landscaping as well as external landscaping sprinklers. Display basic computer skills including inputting air handler schedules and making temperature changes.</p> <p>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist</p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><div> <p> <strong>POSITION SUMMARY</strong> </p> <p> </p> <p>Enter and locate work-related information using computers and/or point of sale systems. Read and visually verify information in a variety of formats (e.g., small print). Transmit information or documents using a computer, mail, or facsimile machine. Exchange information with other employees using electronic devices (e.g., pagers and two-way radios, email). Stand, sit, or walk for an extended period of time or for an entire work shift.</p> <p> </p> <p>Follow all company safety and security policies and procedures; report accidents, injuries, and unsafe work conditions to manager; and complete safety training and certifications. Follow all company policies and procedures, ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Speak with others using clear and professional language, prepare and review written documents accurately and completely, and answer telephones using appropriate etiquette. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Ensure adherence to quality expectations and standards; identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Move, lift, carry, push, pull, and place objects weighing less than or equal to 10 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.</p> <p> </p> <p> </p> </div> <div> </div> <p> <i>At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.</i> </p></div></section>

<p>We are seeking a knowledgeable and proactive Environmental Engineer to ensure that all marine construction, offshore, and infrastructure projects comply with environmental regulations and sustainability standards. The ideal candidate will be responsible for managing environmental impact assessments, monitoring programs, permitting, and providing technical guidance to project teams to minimize environmental risks. Key Responsibilities: • Develop, implement, and monitor Environmental Management Plans (EMP) and Construction Environmental Management Plans (CEMP) for marine and offshore projects • Conduct Environmental Impact Assessments (EIA) for project activities, identifying potential environmental impacts and developing mitigation measures • Ensure all project activities comply with local environmental laws, regulations (e.g., Ministry of Environment, EPA), and international standards (ISO 14001:2015) • Coordinate with regulatory authorities for environmental permits, licenses, and approvals including Consent to Operate (CTO) • Monitor and manage the impact of marine construction activities on ecosystems including coral reefs, mangroves, and marine fauna • Conduct water and sediment quality testing before, during, and after marine construction • Oversee waste management generated from marine construction projects including hazardous and non-hazardous waste • Participate in Environmental Risk Assessment workshops (ENVID) and maintain the Environmental Risk Register (ERR) • Review and endorse environmental studies including baseline surveys, modeling studies, and assessment reports • Provide technical environmental support across design, fabrication, construction, installation, and commissioning phases • Monitor contractor compliance with environmental requirements through audits, inspections, and performance reviews • Track and report environmental performance data including air emissions, water quality, waste management, and greenhouse gases • Develop and review key environmental plans including Waste Management Plans (WMP) and Oil Spill Response Plans • Liaise with clients, subcontractors, and regulatory bodies on environmental matters • Provide environmental training and awareness to project teams and contractors • Stay updated on environmental regulations and industry best practices</p><p>Qualifications & Experience: • Bachelor’s degree in Environmental Engineering, Chemical Engineering, Environmental Science, or related field • Minimum 5-8 years of experience in environmental engineering within marine construction, offshore, or oil & gas industries • Experience with offshore greenfield and brownfield projects is highly preferred • Strong knowledge of environmental regulations, permitting processes, and compliance requirements in the GCC region or relevant jurisdiction • Experience in Environmental Impact Assessment (EIA) across project lifecycles • Familiarity with ISO 14001:2015 environmental management standards • Proficiency in environmental monitoring and reporting tools • Valid offshore survival certificates (BOSIET/HUET) if required • Fluency in English; Arabic or Hindi/Urdu is a plus • Professional membership (e.g., IEMA, IAIA) is an advantage • Postgraduate degree in Environmental Engineering is preferred Required Skills: • Strong knowledge of environmental laws, regulations, and industry standards • Experience in environmental permitting and regulatory liaison • Understanding of marine and coastal ecosystems and environmental impact mitigation • Excellent analytical and problem-solving abilities • Strong communication and report writing skills • Ability to work independently and manage multiple priorities • Attention to detail for compliance and documentation • Team collboration with project, engineering, and HSE teams</p>

EPP III, Generator (3 - 150KW) and HVAC Technician Kuwait, Perform troubleshooting, diagnostics, maintenance, and services on all types of military and commercial generators and HVAC systems used by the U.S. Army to include the 150kW EPP III generators. MEANINGFUL WORK AND PERSONAL IMPACT As a Generator and HVAC Mechanic, the work you ll do at GDIT will be impactful to the mission of the Worldwide Field Support contract for the U.S. Army. You ll play a crucial role in providing on-site technical and maintenance assistance, analyzing complex technical problems, and providing training to site operations and maintenance personnel. Perform maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Troubleshoot and repair HVAC, Chillers, and Environmental Control Units some are standalone units and others are mounted on trailers and vehicles. Maintain all types of commercial power generation equipment; military spec generators and Uninterrupted Power Systems (UPS). Operate a Load bank during testing Fabricate wire harnesses and solder terminals. Some work will be in a generator shop environment, and some work will be in a field environment. Other duties as assigned. WHAT YOU LL NEED TO SUCCEED Bring your Generator and HVAC expertise along with a drive for innovation to GDIT. The Generator and HVAC Mechanic must have: Education: High School diploma Experience: BA/BS plus 2 years experience, AA/AS/plus 4 years experience, or a High School diploma and 7 years experience Technical skills: Extensive diesel generator experience. Knowledge of generator parallel systems and switch gear. Experience with brazing copper tubing and evacuating and recharging refrigerant. Security Clearance: Secret Travel to Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, Iraq Role requirements: US passport must not expire for at least 2 years, valid US driver s license, and an international driver s permit (AAA) Skills Generator Repair HVAC Repair/Troubleshooting Generator Troubleshooting Power Generation Certifications Section 608 Technician Certification EPA is a plusMust meet CRC fitness standards for deployment to SWA (southwest Asia) and maintain those standards annually while on contract in SWA. GDIT IS YOUR PLACE At GDIT, the mission is our purpose, and our people are at the center of everything we do. Growth: AI-powered career tool that identifies career steps and learning opportunities. Support: An internal mobility team focused on helping you achieve your career goals. Rewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay. Community: Award-winning culture of innovation and a military-friendly workplace. OWN YOUR OPPORTUNITY Explore a career in program management at GDIT and you ll find endless opportunities to grow alongside colleagues who share your passion for the mission and delivering results. #GDITPriority #CECOMWFS #DefenseOCONUS

<p>The MIR will assist with testing, checkout, maintenance and repair of all Patriot major end items. The MIR will provide the expertise necessary to assist with single repairs, and those repairs that involve multiple end items. The MIR will act as the primary point of contact for the contractor when information is required for repair actions, procedures, solutions, and provide support to KAF contact teams. Additionally, the MIR will assist with preparations, integration and demonstration of pre, and post C-3 modified systems. The MIR will provide in-depth system knowledge and field experience related to the theory of operation and troubleshooting skills required to resolve complex Patriot missile system Major End Items (MEI) electronic and mechanical problems. The MIR will provide day-to-day execution on the Kuwait Patriot TA program as well as demonstrate the ability to perform depot level diagnostic, fault isolation, cleanup and repair capability for Patriot Weapon System MEIs. The MIR must affect all electronic repairs on location with detailed system knowledge, the ability to use all the hardware and software tools currently available to Organizational and Intermediate Maintenance. This position is located in Kuwait.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Successful completion of a Patriot System Intermediate Maintenance Course for MOS 27X/94S/140L or an equivalent course of instruction on a similar electronic system conducted by the military or the system contractor</li><li>Demonstrated 4 years of field maintenance experience troubleshooting, fault isolation, repair, and functional verifications of the Patriot Air Defense system or similar electronic systems using maintenance diagnostics, unit self-tests, BITE, tools and available test equipment</li><li>Demonstrated experience with Department of the Army Modification Work Order (DAMWO) installations, to include system integration and checkout</li><li>Secret Security Clearance required</li><li>Advanced knowledge of Microsoft Office software. Experience creating tailored reports in Microsoft Excel from external and often compiled data sources.</li><li>Advanced experience using inventory, maintenance, and baseline configuration control database software systems.</li><li>Ability to read and understand technical drawings.</li><li>Experience with spares analysis and procurement.</li><li>Familiarity with Turn Around Time (TAT) analysis.</li><li>Above qualifications plus five (5) years Patriot Depot Forward maintenance experience</li><li>Demonstrated experience with Raytheon Quality Control procedures</li><li>Demonstrated experience of the Patriot refurbishment, modification, and Enhanced Deep Maintenance</li><li>Experience using program management tools such as Earned Value Management System (EVMS), Integrated Master Plan (IMP) / Integrated Master Schedule (IMS), Risk and Opportunity Management or similar business processes</li><li>Demonstrated experience with Contractor Logistics Support</li><li>Demonstrated comprehensive planning skills</li><li>Exceptional judgment and decision-making skills</li><li>Strong interpersonal skills with special focus on achieving active participation of appropriate individuals across the business</li><li>Proficient with Microsoft Office and Project</li><li>Demonstrated experience with training of team members</li><li>Previous experience in International Patriot FMS Programs</li><li>Experience living and working in an overseas location</li><li>Raytheon Six Sigma Certified</li><li>Bachelor's Degree with 5 years of related experience, or Associates Degree with 8 years experience or HS Diploma/GED with 12 years of related experience.</li></ul>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p> </p> <p>Prepares weekly, monthly, quarterly, and annual utilization schedules for maintenance. Maintains proficiency in operations of the USAF Maintenance Information System including Core Automated Maintenance System (CAMS), Centralized Engine Management System (CEMS), and other maintenance management database library programs. Maintains equipment records in library files. Collects, reviews, and files documented information for planning and scheduling of various maintenance activities. Ensures accurate documentation is maintained for aircraft engines, munitions, missiles, AGE configurations, Time Compliance Technical Orders, time change items, and special inspections.</p> <p> </p> <p>USAF equivalent position is Aircraft Scheduling &amp; Documentation Apprentice.</p> <p> </p> <p> <b>Essential Responsibilities:</b> </p> <ul> <li>Assist in the preparations of the weekly, monthly, quarterly, and annual utilization schedules for maintenance.</li> <li>Will oversee TCTO process for completion and proper documentation with IMDS and/or CEMS.</li> <li>Maintains assigned aircraft/equipment records in database library files within IMDS and/or CEMS.</li> <li>Assists in the collection, review, and filing of documented information for planning and scheduling of RPA maintenance activities.</li> <li>Ensure accurate documentation is maintained for aircraft engines, munitions, missiles, AGE configurations, Time Compliance Technical Orders, time change items, and special inspections.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <p> </p> <p> <b>Minimum Requirements:</b> </p> <ul> <li>Must have High School diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one-year actual Aircraft Plans &amp; Scheduling experience required.</li> <li>Must possess basic planning and organizational skills.</li> <li>Must be able to work under deadlines with minimal supervision.</li> <li>Must be able to gain/maintain CEMS access for Engine Management purposes.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li> <li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have a current/active U.S. Driver s License.</li> <li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li> <li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <p> </p> <p> <b>Preferred Qualifications:</b> </p> <ul> <li>Associate degree in a relevant career field.</li> <li>Plans and Scheduling experience within the last 10 years.</li> <li>RPA Operations &amp; Deployment experience.</li> <li>Previous experience as Engine Manager with CEMS experience.</li> <li>Prior experience as a Defense Contractor.</li> <li>Previous MQ-9 Plans and Scheduling experience desired.</li> </ul>

<p><strong>Job Summary:</strong> The Sr. Sales Executive Digital Marketing is responsible for driving revenue growth while enhancing brand positioning and corporate reputation. This hybrid role combines sales, business development, marketing strategy, and public relations to ensure strong market presence, client acquisition, and long-term business success. The role requires a strategic thinker with strong commercial acumen and marketing expertise</p><p><strong>Key Responsibilities:</strong></p><ul><li><strong>Business Development &amp; Sales Growth</strong><ul><li>Identify and acquire new clients across target industries.</li><li>Develop and execute sales strategies to achieve revenue targets.</li><li>Build and manage a strong sales pipeline and forecast opportunities.</li><li>Lead client meetings, presentations, and commercial negotiations.</li><li>Prepare proposals, quotations, and close deals.</li></ul></li><li><strong>Marketing Strategy &amp; Campaign Management</strong><ul><li>Develop and implement integrated marketing strategies aligned with business goals.</li><li>Plan and execute marketing campaigns (digital, social media, events, offline).</li><li>Monitor campaign performance and optimize ROI.</li><li>Align marketing initiatives with lead generation and sales objectives.</li><li>Analyze market trends, competitors, and customer behavior.</li><li>Identify new business opportunities and market segments.</li><li>Provide strategic recommendations to enhance service offerings</li></ul></li><li><strong>Public Relations &amp; Corporate Communications</strong><ul><li>Develop and execute PR strategies to enhance brand visibility and reputation.</li><li>Manage media relations, press releases, and corporate communications.</li><li>Handle crisis communication when required.</li><li>Build relationships with media, influencers, and industry stakeholders.</li></ul></li><li><strong>Client Relationship Management</strong><ul><li>Build and maintain long-term relationships with clients and partners.</li><li>Act as the main point of contact for key accounts.</li><li>Ensure client satisfaction, retention, and business growth.</li><li>Identify upselling and cross-selling opportunities.</li></ul></li><li><strong>Brand Management</strong><ul><li>Ensure consistent brand identity and messaging across all channels.</li><li>Oversee content creation (social media, website, marketing materials).</li><li>Maintain and enforce brand guidelines internally and externally.</li><li>Plan and manage events, exhibitions, and corporate activations.</li><li>Lead product launches and promotional campaigns.</li><li>Represent the company in networking events and public forums.</li></ul></li><li><strong>Reporting &amp; Performance Management</strong><ul><li>Track KPIs across sales, marketing, and PR activities.</li><li>Monitor revenue targets, campaign performance, and ROI.</li><li>Prepare regular reports, forecasts, and strategic insights for management.</li></ul></li></ul><p><strong>Desired Candidate Profile</strong></p><p>5 8+ years of experience in Business Development, Sales, Marketing, or PR.</p><p>Requirement Open to all nationals</p><p>Business Development &amp; Commercial Acumen</p><p>Proficiency in English and Arabic languages.</p>

<p><h4>Company description</h4> <p>Join a hotel that is a member of the Accor network, whose group brings together more than 45 brands, 5,500 hotels, 10,000 restaurants and lifestyle destinations. Here, we believe in you and what you bring to the table. There are many opportunities for development and advancement. Every gesture, every smile, every action, contributes to creating a positive and memorable impact for our customers, our colleagues and also for our planet. Together, we embody the vision of responsible hospitality.</p> <p>Take the opportunity to become a Heartist®, and let your heart guide you in this world where life beats faster.</p> <h4>Job description</h4> <p><strong>General mission</strong><br> To manage all stocks under responsibility and ensure their safeguarding and proper accountability.</p> <p><strong>Key responsibilities</strong></p> <ul> <li>Safeguard all stored items and prevent loss, spoilage, and breakage through secure storage practices, expiry date monitoring, and maintaining a clean, organised storeroom</li> <li>Control all stock movements by issuing goods only against authorised requisitions and maintaining accurate records in the stock system</li> <li>Conduct regular physical inventory checks and reconcile findings with system records to ensure accuracy</li> <li>Monitor stock levels and follow up with the purchasing department to ensure timely replenishment in accordance with par levels set by management</li> <li>Prepare required reports including receiving records, daily summary reports, and slow moving item reports as directed by management</li> <li>Maintain effective working relationships with all departments to support hotel operations</li> </ul> <p><strong>Other responsibilities</strong><br> Undertake any additional duties as assigned by senior management</p> <h4>Qualifications</h4> <ul> <li>Diploma 3 of accounting administration</li> <li>Minimum 1 year experience or internship in hospitality industry</li> <li>Literate HACCP basic knowledge</li> </ul> <h4>Additional information</h4> <p><strong>Your team and working environment:</strong><br> In 1-2 sentences, introduce the team, property or office environment in a way that reflects the culture.</p> <p><strong>Our commitment to diversity & inclusion:</strong><br> We are an inclusive company and our ambition is to attract, recruit and promote diverse talent.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for a highly professional, proactive, and trustworthy Executive Personal Assistant to provide comprehensive support to a business owner managing multiple companies and international operations. Manage the executive's calendar, appointments, and daily schedule to ensure efficient time management. Coordinate domestic and international travel arrangements, including flights, accommodations, visas, and ground transportation. Liaise with internal teams, suppliers, business partners, and external service providers to ensure timely communication and follow-up. Monitor ongoing projects, track deadlines, and ensure action items are completed on schedule. Prepare professional reports, presentations, spreadsheets, meeting agendas, and meeting minutes. Organize, maintain, and safeguard confidential documents, records, and business information. Conduct market research, gather business intelligence, and prepare analytical summaries to support decision-making. Handle personal errands and administrative matters with the highest level of professionalism, discretion, and confidentiality. Assist in planning and coordinating meetings, corporate events, and business travel. Serve as the primary point of coordination between the executive and internal departments, ensuring seamless communication and operational efficiency.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum of 3 5 years of experience as an Executive Assistant, Personal Assistant, or in a similar administrative support role.</li><li>Excellent verbal and written communication skills in English; proficiency in Arabic is an advantage.</li><li>Exceptional organizational, planning, and time-management skills, with the ability to prioritize multiple tasks effectively.</li><li>Strong attention to detail and a high level of accuracy in all work.</li><li>Proficiency in Microsoft Office Suite, Google Workspace, and AI productivity tools such as ChatGPT.</li><li>Demonstrated ability to work under pressure, meet deadlines, and maintain the highest level of confidentiality and discretion.</li><li>Strong problem-solving skills with a proactive, resourceful, and solution-oriented approach.</li><li>Flexibility to work outside standard business hours when required.</li><li>Preferred Qualifications Experience providing direct support to CEOs, founders, or senior business executives.</li><li>Proven experience coordinating international travel, including flight bookings, accommodation, transportation, and visa applications.</li><li>Valid driver's license is an advantage.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Our client is dedicated to creating luxurious, high-quality fashion that defines elegance and sophistication. Their brand is synonymous with exceptional craftsmanship and timeless design. As they continue to expand their global presence, we are seeking an experienced and visionary Buying Director to join the team and drive their purchasing strategy to new heights. Job Description: As the Buying Director, you will play a critical role in curating and managing the exclusive product assortment. You will lead a team of talented buyers, collaborate closely with design and merchandising teams, and establish strong relationships with elite suppliers to ensure their collections reflect the brand s prestige and meet the highest standards of excellence. Key Responsibilities: Develop and execute a strategic buying plan that aligns with the brand s luxury positioning and business goals. Lead, mentor, and inspire the buying team, fostering a culture of excellence, innovation, and collaboration. Analyze market trends, customer preferences, and competitor activities to identify opportunities and drive purchasing decisions. Build and maintain strong relationships with premier suppliers, negotiating advantageous terms and ensuring superior quality and sustainability. Collaborate with design, merchandising, and marketing teams to curate refined and cohesive collections that resonate with our discerning clientele. Monitor and manage inventory levels, ensuring optimal stock levels while minimizing excess and obsolescence. Oversee budget management, ensuring efficient allocation of resources and achieving financial targets. Stay ahead of industry developments and emerging trends, continuously seeking innovative ways to enhance the product offering.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Fashion Merchandising, Business Administration, or a related field. Advanced degree preferred.</li><li>Experience in a senior buying role within the premium or luxury fashion industry.</li><li>Proven track record of successful product assortment planning and high-level supplier negotiation.</li><li>Strong leadership skills with the ability to inspire and develop a high-performing team.</li><li>Excellent analytical, strategic thinking, and decision-making abilities.</li><li>Exceptional communication and interpersonal skills, with the ability to build and maintain effective relationships.</li><li>Passion for luxury fashion, with a keen eye for trends and an understanding of the high-end market.</li><li>Proficiency in relevant software and tools, including buying and inventory management systems.</li></ul><p></p></section>

Job Description<br><br>Exceptional Hospitality Starts with You<br><br>Picture yourself brightening someone’s day. When you join our Hotels team, that’s exactly what you’ll do every time you come to work! As a Guest Relations Manager, you’re not just overseeing day-to-day guest services operations – you’re spreading the light and warmth of hospitality by delivering memorable experiences that make the stay for every guest.<br><br>Responsibilities<br><br>Here's what you'll do during a typical day:<br><br>Oversee guest services operations: Manage day-to-day operations of all guest services functions, including bell services, luggage storage, package delivery, valet, parking, and related systems to ensure a seamless guest experience Monitor and elevate service: Track guest satisfaction, address service issues, and guide the team to implement improvements that enhance the guest experience Manage department administration: Lead budgeting, forecasting, policy enforcement, and special projects to support operational effectiveness Inspire and develop the team: Supervise and support team members, monitor performance, provide coaching, and foster a positive and productive work environment<br><br>Qualifications<br><br>What It Takes to Make the Stay<br><br>At Hilton, Our Core Values Define What It Takes To Succeed Here And Guide The Qualities We Look For In Every Team Member<br><br>A passion for spreading the light and warmth of Hospitality. Acting with Integrity and always doing the right thing. Inspiring others through Leadership. A belief that Teamwork drives the best outcomes. A sense of Ownership and accountability. And a focus on the Now, bringing urgency and discipline to every moment, knowing it can make a lasting impact.<br><br>About Us<br><br>Join an Award-Winning Workplace Culture<br><br>At Hilton, we don’t just deliver exceptional experiences for our guests—we build an exceptional workplace for the Team Members who make it all possible. As a global leader in hospitality, we’ve welcomed more than 3 billion guests worldwide, all while staying true to our founding vision: to fill the earth with the light and warmth of hospitality.<br><br>Our award-winning culture has earned us repeated recognition on the World’s Best Workplaces list by Great Place to Work and Fortune. With our suite of world-class brands , and a company-wide commitment to providing the best stay for every guest, we’re setting new standards for the future of travel.<br><br>Whether you’re starting your career or exploring something new, Hilton supports your journey every step of the way. Come for the job, stay for the career—and help us make every stay a little more magical.<br><br>Curious about life at Hilton? Explore our Careers Blog to see why we’re more than a great place to stay—we’re a great place to work.