Radiographer Jobs in Kuwait

<p> <b>The UH-60 Aircraft Mechanic AM-I (UH-60)</b> troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.</p> <ul> <li> <p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</p> </li> <li> <p>Service and lubricate aircraft and subsystems.</p> </li> <li> <p>Safely prepare aircraft for inspections and maintenance checks and services.</p> </li> <li> <p>Perform scheduled inspections and assist in performing special inspections.</p> </li> <li> <p>Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.</p> </li> <li> <p>Use and perform operator maintenance on tools, special tools and aircraft ground support equipment.</p> </li> <li> <p>Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives.</p> </li> <li> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> </li> <li> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation.</p> </li> <li> <p>Participate in maintenance test flights and operation checks as required.</p> </li> <li> <p>Perform other duties as requested.</p> </li> </ul> <p> </p> <p> <b>Minimum Requirements:</b> </p> <ul> <li> <p>High School Diploma or equivalent required.</p> </li> <li> <p>A valid up-to-date FAA A&amp;P certificate is preferred.</p> </li> <li> <p>If No FAA A&amp;P certificate; candidate Must have Three (3) years aviation maintenance experience, with a minimum of two (2) years on the assigned <b>UH-60 </b>Mission Design Series (MDS). </p> </li> <li> <p>All experience must be within the Six (6) most recent years. </p> </li> <li> <p>Must be in possession of a U.S. Passport with a min. 2 plus years validity and be able to travel internationally.</p> </li> <li> <p>Must be able to obtain and maintain facility Public Trust NAC-I. Note: <b>US Citizenship is required </b>for facility Public Trust NAC-I at this work location.</p> </li> <li> <p>Must be able to pass the CENTCOM Medical requirement to deploy.</p> </li> <li> <p>Must be able to obtain Kuwait Visa</p> </li> </ul> <p> </p> <p> <b>Knowledge &amp; Skills</b> </p> <ul> <li> <p>General knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</p> </li> <li> <p>Basic knowledge of aircraft sheet metal/structural modifications and repair.</p> </li> <li> <p>General knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</p> </li> <li> <p>Working knowledge of technical publications and Logistics Information Systems.</p> </li> <li> <p>Able to prioritize workloads to maintain schedules on assigned projects.</p> </li> <li> <p>Participate in maintenance test flights and operation checks as required.</p> </li> <li> <p>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</p> </li> <li> <p>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, and may be required to make entries in aircraft logs and records.</p> </li> </ul> <p> </p> <p> <b>Physical Requirements/Working Environment</b> </p> <ul> <li> <p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p> </li> <li> <p>Must be able to climb stairs, ramps, ladders, and work stands.</p> </li> <li> <p>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</p> </li> <li> <p>May be required to lift heavy objects whose weight may exceed 50 pounds.</p> </li> <li> <p>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p> </li> <li> <p>Will handle dirty parts and lubricants.</p> </li> <li> <p>Will be required to wear proper Personal Protective Equipment (PPE).</p> </li> <li> <p>Must be able to pass a Respirator Physical and Fit Test qualification.</p> </li> <li> <p>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</p> </li> <li> <p>Must be able to lift/push/pull minimum of 50 pounds.</p> </li> <li> <p>May work in maintenance shop or outside.</p> </li> <li> <p>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p> </li> <li> <p>May be exposed to extreme noise from operating equipment.</p> </li> <li> <p>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p> </li> <li> <p>Occasionally lifts objects up to 50 pounds.</p> </li> <li> <p>Most heavy lifting is accomplished through the use of mechanical devices.</p> </li> <li> <p>May be expected to work in austere environments and all-weather conditions.</p> </li> </ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><br></p><p>Open Positions:</p><p><br></p><p>Ceramist</p><p>CAD/CAM Technician</p><p>Removable / Denture Technician</p><p>Plaster &amp; Metal Department Technician</p><p><br></p><p>Requirements:</p><p>Graduate of Dental Technology</p><p>Minimum of 3–5 years of relevant Work experience</p><p>Valid Professional License</p><p><br></p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Key Skills &amp; Requirements</p><ul><li>Diploma or certification in Dental Laboratory Technology</li><li>Experience working in a dental laboratory</li><li>Skilled in <b>fixed and removable prosthodontics</b></li><li>Experience with <b>crowns, bridges, veneers, dentures, and partial dentures</b></li><li>Knowledge of <b>ceramics, zirconia, acrylic, and metal frameworks</b></li><li>Strong skills in <b>dental wax-up and model preparation</b></li><li>Knowledge of <b>CAD/CAM digital dental technology</b> is an advantage</li><li>Ability to read and understand dental prescriptions and laboratory instructions</li><li>Good knowledge of <b>dental anatomy, occlusion, and tooth morphology</b></li><li>Excellent attention to detail and accuracy</li><li>Ability to achieve high-quality aesthetic and functional results</li><li>Good hand skills and ability to work with precision</li><li>Ability to meet deadlines and manage multiple cases</li><li>Strong communication and teamwork skills</li><li>Commitment to <b>infection control, laboratory safety, and quality standards</b></li><li>Ability to work independently with minimal supervision</li><li>Willingness to learn new techniques and technologies</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Shall satisfy the requirements of a fully qualified Instrument Technician / Engineer meeting the requirements laid out by the Instrument Society of America or the Institute of Measurement &amp; Control, with a minimum of a diploma in Technology or equivalent and 8 years field experience in construction and pre-commissioning both plant and equipment &amp; conversant with NFPA 70&nbsp;standard &amp; conversant to work on Electrical system for Electrical works.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>minimum 6 years of experience </p></div>

<p>Role: Foreman / Technician</p><p>Industry Type: Recruitment / Staffing</p><p>Department: Production, Manufacturing &amp; Engineering</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Operations, Maintenance &amp; Support</p><p>Education</p><p>UG: ITI Certification in Any Specialization, Diploma in ITI</p><p><strong>Desired Candidate Profile</strong></p><p>03 YRS, in VENDING MACHINE TECHNICIAN</p>

Overview<br><br>Are you a cloud loving person that has Cloud and IT (information technology) Service Management blood running in your veins? Do you want to be that key person that helps our customers achieve the most out of the Microsoft products and services they use? Do you get your energy from making your customers succeed in making their strategic and transformational cloud projects real?<br><br>As a Customer Success Account Manager (CSAM), you are the primary delivery lead and a partner for our more strategic customers, empowering them to achieve more by accelerating their business value across our Digital Cloud platforms. By leveraging your business acumen, industry perspectives, customer knowledge, and technical expertise you will be responsible for the end-to-end post sales delivery and support orchestration across the Microsoft and Partner ecosystem to align the right resources at the right time to achieve customer outcomes. Check out the CSAM role in the Customer Success Unit at Microsoft! Be ready to make impact! This opportunity will allow you to accelerate your career growth, leverage your delivery management capabilities and deepen your cloud and industry expertise.<br><br>Microsoft’s mission is to empower every person and every organization on the planet to achieve more. As employees we come together with a growth mindset, innovate to empower others, and collaborate to realize our shared goals. Each day we build on our values of respect, integrity, and accountability to create a culture of inclusion where everyone can thrive at work and beyond.<br><br>Responsibilities<br><br>Customer Relationship Management<br><br>Builds and coaches others on customer, partner, and internal stakeholder engagement strategy and models. Develops, maintains, and builds upon foundational relationships with key customer stakeholders and technical professionals to enable quality solution delivery and health using partnerships with other account team leaders and leads orchestration across internal/external stakeholders. Expands customer and partner relationships beyond the current Unified Support contract consumers with a focus on leading the definition of business outcomes and how to align Microsoft strategy to customer business priorities.<br><br>Identifies, navigates, communicates, and influences key customer technical, business, and executive-level stakeholders (including partners). Guides and leads conversations to facilitate the achievement of customer business objectives by leveraging their investment in Microsoft. Maps internal roles to customer priorities to action the needs of customers and provides input into customer priorities. Holds, maintains, and nurtures internal stakeholder relationships. Influences and challenges senior/executive internal stakeholders. Leads business value conversations at customer executive levels.<br><br>Initiates the gathering of information on the business and Information Technology objectives for customer organizations using partnerships with other account team leaders to identify customer priorities. Partners with Account Team to create a customer success plan and contribute to the shared customer account plan in support of customer objectives specific to the customer's business transformation programs and common to their industry.<br><br>Customer Success Leadership<br><br>Leads the strategic execution of program planning and customer-facing program reviews, prioritization of engagements, and management of key stakeholder and executive expectations to address agreed-upon customer outcomes and account priorities to deliver ongoing customer success. Leverages Microsoft delivery management methodologies, processes, and tools to manage and improve customer operational health. Proactively identifies and mitigates customer blockers by leveraging Microsoft solutions and services, and develops deliverable programs of work. Orchestrates delivery resources to facilitate value realization with a focus on driving operational health. Leads delivery program reviews with internal stakeholders to ensure alignment on customer outcomes and account priorities. Leads escalation management and communications for delivery programs in the customer account.<br><br>Engages in conversations with customers and demonstrates alignment between customer objectives and the current Microsoft portfolio of work in the customer account. Promotes the organizational and customer success strategy with customers. Aligns Microsoft technology and services with the customer's goals and objectives to form a cooperative strategy. Engages in account team planning, promoting business and technical needs for change that challenge customer thinking. Aligns with the account team to link Customer Success Plans (CSPs) with account plan priorities and develop bookable programs of work. Challenges the customer and influences their strategic decision making, driving the case for change towards improved operational health.<br><br>Proactively identifies, monitors, and mitigates actual and potential blockers to consumption through data analysis and customer feedback. Mobilizes resources to address actual and potential blockers to consumption, associated issues, and to ensure delivery on Customer Success Plans (CSPs). Holds accountability for identified consumption milestones and their completion. Partners with customers to proactively identify opportunities for growth, optimize usage, and drive adoption. Partners with customers to understand their business objectives, identify opportunities where Microsoft offerings can help achieve those objectives, and aligns Microsoft products and services to agreed-upon customer outcomes and account priorities. Leverages an understanding of the customer's needs and business objectives to identify opportunities where Microsoft can provide added value to maximize retention and minimize churn.<br><br>Technical Relevance<br><br>Understands, identifies, and aligns Microsoft solutions, and technical capabilities (e.g., Azure, Modern Work, Dynamics) to customer needs and priorities. Leverages broad foundational industry and technical expertise to enable customer success. Identifies complex customer scenarios (e.g., Independent Software Vendors [ISV], cross-cloud, partner) and aligns with technical specialists to identify relevant cross-cloud technology solutions. Strengthens Microsoft's position in the customers' cloud technology marketplace against competitors. Leverages understanding of the customer's technology platform and Microsoft's technology roadmap to enable customer digital transformation.<br><br>Qualifications<br><br>Bachelor's Degree in Business, Engineering, Computer Science, or related field AND 1+ years customer success, solution delivery, practice management, customer-facing consulting, or portfolio management experience.<br><br>Proficiency in English.<br><br>This position will be open for a minimum of 5 days, with applications accepted on an ongoing basis until the position is filled.<br><br>Microsoft is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, citizenship, color, family or medical care leave, gender identity or expression, genetic information, immigration status, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran or military status, race, ethnicity, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable local laws, regulations and ordinances. If you need assistance with religious accommodations and/or a reasonable accommodation due to a disability during the application process, read more about requesting accommodations.

<p><h4>Description</h4> <p>The role in brief:<br> You'll be responsible to help support your employer's computer systems by installing, designing, and protecting them. This includes working on local area networks, network segments, Internet systems, and wide area networks.</p> <h4>Your responsibilities</h4> <ul> <li>Implementation and the high level of performance tuning and recovery procedures for mission critical enterprise systems.</li> <li>Serve as a technical expert in the area of system administration for complex operating systems. Investigate and analyze feasibility of system requirements and develop system specifications. Identify methods and solutions.</li> <li>Installation, configuration, and upgrading of servers and related hardware and software in a LAN, WAN, and stand-alone environment.</li> <li>Investigation, diagnostic testing, troubleshooting, and repair/resolution of system, hardware, software, and infrastructure.</li> </ul> <h4>Requirements</h4> <h4>Your qualification</h4> <ul> <li>Minimum 4 to 6 years of experience in a similar environment.</li> <li>Candidate should possess at least a Bachelor of Science or Bachelor of Computer Application.</li> <li>MCSE/MCSA certification and application-level certification related to Exchange and Storage will be an added advantage.</li> <li>Should be fluent in English; Arabic is an added advantage.</li> <li>Must have good communication skills, both verbal and oral, and be a self-starter.</li> </ul> <h4>Your proficiencies</h4> <ul> <li>Knowledge in network hardware infrastructure, diagnosis, and troubleshooting abilities.</li> <li>Fluent in English; Arabic would be an added advantage.</li> <li>Capacity to deal with complex problems with ability to demonstrate good judgment and decision making.</li> <li>Good communication skills.</li> <li>Able to work in a fast-paced environment, motivated and a team player with team management, business, and organization understanding.</li> <li>Organized, highly motivated, and goal-oriented.</li> <li>Adaptive to sudden schedule changes.</li> <li>Able to work well within teams.</li> </ul></p><p></p>

<p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p><p>The Aviation Support Equipment Technician diagnoses malfunctions repairs and maintains Support Equipment (SE); inspects and approves completed maintenance actions; troubleshoots discrepancies by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and historical maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs SE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on SE by inspecting, testing and operating SE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components, as well as stenciling and marking SE, storing, handling, labelling, using and disposing of hazardous materials and hazardous waste. The Technician prepares SE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles, to include Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety awareness.</p><p>Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify/inspect work performed by other technicians for which he/she is qualified to perform. Reviews, interprets, and applies maintenance procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Performs O , I and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals. Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications. Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins. Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. and performs proper handling and disposal of chemicals and petroleum products required during maintenance. Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system. Performs close tolerance adjustment, repair and rework of equipment in and out of shop area. Services, inspects and tests aviation support equipment used for direct and indirect aircraft support. Troubleshoots, inspects, services, tests and re-conditions storage batteries, to include lead-acid, gel and sealed type. Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE). Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment. Conducts off station maintenance when required. When necessary, perform other duties and functions critical to the support of the program.</p><p>Uses digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, diagnosing software, circuit card testers, transistor testers, and hand tools to analyze, diagnose, and repair applicable Support Equipment.</p><p>Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required.</p><p>The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High School Diploma</li><li>Must be able to obtain/maintain the following required certifications/qualifications: Applicable Support Equipment licensing: I Level &amp; O Level Tire &amp; Wheel certification Hydraulic Contamination certification Collateral Duty Inspector (CDI) qualification Corrosion Prevention and Control and Aircraft Paint qualification I Level Battery Maintenance certification</li><li>Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted.</li><li>Naval Aviation Maintenance Program (NAMP) 4790.2 or equivalent experience with Air Force Instruction 21-101 preferred.</li><li>Must have a working knowledge of first aid procedures to be used in an emergency.</li><li>Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures).</li><li>This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance.</li><li>Must be United States (U.S.) citizen, be able to read, write, and understand the English language</li><li>Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration.</li><li>Must have a valid U.S. Driver s License.</li><li>Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements.</li><li>Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc ) as required by local policies.</li><li>Must be willing and able to comply with all program functional requirements to include but not limited to: The performance of I Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp; MLG Tire re-building, MLG Brake repair/rebuilding, Battery maintenance support, and Oxygen Regulator testing/repair.</li><li>Must be willing and able to deploy off-site as required to support Kuwait Air Force operations.</li><li>Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required.</li><li>Must have the ability to communicate clearly, concisely and follow instructions when directed on assigned tasks.</li><li>Have a strong knowledge base of intermediate level maintenance business practices and procedures</li><li>Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions.</li><li>As a Subject Matter Expert, must be willing to perform in-depth research, troubleshoot, and perform O level, I level, and commercial level maintenance functions on all applicable SE systems and components necessary to return equipment to a Ready for Issue (RFI) status; this includes determining material requirements, researching part numbers, ordering, tracking, and receiving materials as required to facilitate SE inspections/repairs.</li><li>Must be able to communicate directly with the customer, pilots, air crew members, management, and maintenance personnel to gather and relay pertinent data/information necessary to ensure equipment is available to support aircraft launches and maintenance.</li><li>Must have an in-depth knowledge of applicable technical orders/job guides/publications read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications.</li><li>Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations.</li><li>Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations.</li><li>Must perform as a team member, contributing to the success of the KC-130J / Common Support Equipment (CSE) Program.</li><li>Must be willing and able to work with hazardous materials and conduct specialty on-the-job training.</li><li>Must be dependable and timely in managing assigned tasks, perform consistent quality maintenance.</li><li>Must have a proven ability to work independently with minimal direction.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities SUMMARY The Common Support Equipment Technician diagnoses malfunctions and repairs Common Support Equipment (CSE); inspects and approves completed maintenance actions; solves repair problems by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on CSE by inspecting, testing and operating CSE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components. As well as stenciling and marking CSE, storing, handling, labeling, using and disposing of hazardous materials and hazardous waste. The Technician prepares CSE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles such as Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety at all times. ESSENTIAL FUNCTIONS + Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify work performed by another for which he/she is qualified to perform. + Reviews, interprets, and applies the assigned maintenance manual procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data. + Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. + Performs “O”, “I” and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals. + Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications. + Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins. + Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. + Analyzes, diagnoses, and repairs CSE using conventional and digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, circuit card testers, transistor testers, and hand tools. + Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. Performs proper handling and disposal of chemicals and petroleum products required during maintenance. + Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system. + Performs close tolerance adjustment, repair and rework of equipment in and out of shop area. + Services, inspects and tests aviation support equipment used for direct and indirect aircraft support. + Troubleshoots, inspects, services, tests and conditions storage batteries to include lead-acid, gel and sealed type. + Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE). + Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment. + Conduct off station maintenance when required. + When necessary, performs other duties and supervisory functions, critical to the function of the program and to ensure compliance with the Performance Work Statement (PWS). PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is frequently required to use hands to finger, handle, or feel; sit, stand and reach with hands and arms; walk, climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee must be able to lift 20 lbs. and occasionally lift and/or move up to 50 lbs. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail and hearing protection is required. Qualifications MINIMUM REQUIREMENTS / QUALIFICATIONS + Must be able to adhere to and comply with all Kuwaiti Labor and Immigration requirements. + Must be United States (U.S.) citizen, have a high school diploma or equivalent, be able to read, write, and understand the English language. + Must be able to obtain a United States Passport. If you currently possess a United States Passport and it must have at least 24 months of time remaining before expiration. + Graduation from a standard four (4) year high school or equivalent (GED). + Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted. + Have a strong knowledge base of aviation maintenance procedures (safety, tool control, HAZMAT, Inspection programs, Administrative requirements, support equipment, calibration/torque procedures). + Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc…) as required by local policies. + Must be able to obtain / maintain the following required certifications / qualifications: -Applicable Support Equipment licensing -“I” Level &amp; “O” Level Tire &amp; Wheel certification -Hydraulic Contamination certification -Collateral Duty Inspector (CDI) qualification + Must be willing and able to deploy off-site as required to support Kuwait Air Force operations. + Must be able to work day shift, night shift or weekend duty and travel as part of a maintenance repair team as required. + Have a strong knowledge base of Intermediate Level Maintenance business procedures. + Must have a current civilian driver's license, and be able to obtain and maintain a government flight line driver’s license. + Must have an in-depth knowledge of technical orders/job guides/publications—read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications. + Must be able overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations. + Must have a working knowledge (input and extract data) of computers. + Must be willing and able to work with job required hazardous materials. + Must be willing and able to conduct specialty on the job training. + Requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance. What We Bring: At V2X we strive to be market competitive in our total reward offerings. Employee benefits include the following: • Healthcare coverage • Life insurance, AD&amp;D, and disability benefits • Retirement plan • Wellness programs • Paid time off, including holidays and leave of absences • Eligible Tuition Reimbursement • Learning and Development resources • Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<ul><li><p>Install, configure, and maintain Audio Visual systems</p></li><li><p>Install projectors, screens, speakers, displays, and AV equipment</p></li><li><p>Perform structured cabling and cable termination</p></li><li><p>Install and troubleshoot low-voltage systems</p></li><li><p>Conduct testing, commissioning, and troubleshooting</p></li><li><p>Read and understand wiring diagrams and technical drawings</p></li><li><p>Coordinate with project teams during site installations</p></li><li><p>Ensure quality, safety, and professional installation standards</p></li><li><p>Diploma / ITI / Technical qualification preferred</p></li><li><p>Experience in AV and Low Voltage installation</p></li><li><p>Knowledge of AV equipment, cabling, and basic networking</p></li><li><p>Ability to troubleshoot technical issues</p></li><li><p>Good communication and teamwork skills</p></li><li><p>Kuwait driving license is an advantage</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>The Audio Visual & Low Voltage Technician is responsible for the installation, configuration, testing, commissioning, troubleshooting, and maintenance of Audio Visual and Low Voltage systems at residential, commercial, and project sites. The technician will ensure that all installations are completed safely, professionally, and according to project requirements.</p>

<ul><li><p>Install, configure, and maintain Audio Visual systems</p></li><li><p>Install projectors, screens, speakers, displays, and AV equipment</p></li><li><p>Perform structured cabling and cable termination</p></li><li><p>Install and troubleshoot low-voltage systems</p></li><li><p>Conduct testing, commissioning, and troubleshooting</p></li><li><p>Read and understand wiring diagrams and technical drawings</p></li><li><p>Coordinate with project teams during site installations</p></li><li><p>Ensure quality, safety, and professional installation standards</p></li><li><p>Diploma / ITI / Technical qualification preferred</p></li><li><p>Experience in AV and Low Voltage installation</p></li><li><p>Knowledge of AV equipment, cabling, and basic networking</p></li><li><p>Ability to troubleshoot technical issues</p></li><li><p>Good communication and teamwork skills</p></li><li><p>Kuwait driving license is an advantage</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p>The Audio Visual & Low Voltage Technician is responsible for the installation, configuration, testing, commissioning, troubleshooting, and maintenance of Audio Visual and Low Voltage systems at residential, commercial, and project sites. The technician will ensure that all installations are completed safely, professionally, and according to project requirements.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>The Audio Visual &amp; Low Voltage Technician is responsible for the installation, configuration, testing, commissioning, troubleshooting, and maintenance of Audio Visual and Low Voltage systems at residential, commercial, and project sites. The technician will ensure that all installations are completed safely, professionally, and according to project requirements.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Install, configure, and maintain Audio Visual systems</li><li>Install projectors, screens, speakers, displays, and AV equipment</li><li>Perform structured cabling and cable termination</li><li>Install and troubleshoot low-voltage systems</li><li>Conduct testing, commissioning, and troubleshooting</li><li>Read and understand wiring diagrams and technical drawings</li><li>Coordinate with project teams during site installations</li><li>Ensure quality, safety, and professional installation standards</li><li>Diploma / ITI / Technical qualification preferred</li><li>Experience in AV and Low Voltage installation</li><li>Knowledge of AV equipment, cabling, and basic networking</li><li>Ability to troubleshoot technical issues</li><li>Good communication and teamwork skills</li><li>Kuwait driving license is an advantage</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <b>Overview</b><br><p>Proactively acts as the voice of the customer/partner and internal communities leveraging relevant insights from feedback tools and systems. Identifies and/or translates customer/partner problems into industry solutions. Drives self and guides other team members to focus on customer/partner experience through efficient delivery and ensuring a seamless and connected customer experience. Proactively identifies, escalates, and mitigates blockers using appropriate tools. Delivers solutions in line with company methodologies, ensuring proven practices and patterns are followed. Proactively identifies new opportunities for Consumption, Usage &amp; Unified expansion at scale. Operates according to required operational excellence and proven practice standards throughout all sales stages/activities/tools of record. Leverages market insights and demand signals. Contributes to leading virtual teams using knowledge of Microsoft architectures and their context in the competitive landscape. Proactively identifies gaps that enable solutions to scale across customers.</p><br><br><br><b>Responsibilities</b><br>Business Impact<br>Operates according to required operational excellence and proven practice standards throughout all sales stages/activities/tools of record (e.g., pipeline updates, time tracking). Collaborates across Microsoft and customer/partner teams through on-strategy delivery to achieve customer/partner objectives and increase customer/partner satisfaction. Proactively manages business and technical risks, adapts methodology and applies governance principles to identify, communicate, and minimize business and technical risks. Executes work in compliance with industry and Microsoft guidelines and procedures. Continuously prioritizes among competing demands in their work and identifies where impact occurs with customers, ensuring alignment with business priorities and goals.<br><br>Delivers solutions in line with company methodologies (e.g., product offerings such as value-based deliverables [VBDs], advice, training, technical validation), ensuring proven practices and patterns are followed to prepare customers for operational readiness and achievement of their business goals and targets. Leveraging knowledge of change management proven practices and/or involving the change management team, proactively helps the customer deploy for long-term organizational adoption to increase customer satisfaction and drive consumption/usage. Guides customers/partners towards a well-architected (e.g., secure, resilient, artificial intelligence [AI]-enabled), and cost- and performance-optimized solution to increase retention and expansion opportunities. Provides feedback to Unified Delivery Team on VBDs to refine and further develop content.<br><br>Proactively identifies new opportunities for Consumption, Usage &amp; Unified expansion (especially Enhanced Solutions) at scale based on business value to customer/partner and clear understanding of the Microsoft value proposition for supported platforms to empower cloud success, foster and strengthen security and resiliency, and drive AI innovation. Actively listens to and respectfully challenges customers/partners, building trust to then advocate for alternative architectures/solutions/approaches that shape and/or enhance customer requirements. Identifies, and evaluates industry trends (e.g., customer industry verticals, information technology [IT] industry), gathers customer/partner insights (e.g., feedback around technical preferences, environments, business needs, competitive landscape), and maps existing architecture and digital transformation solutions to customer/partner business outcomes. Proactively captures opportunities in appropriate systems, processes, and tools, working collaboratively across the organization to execute on opportunities aligned with Microsoft's Customer Engagement Model.<br><br>Proactively identifies, escalates, and mitigates blockers using appropriate tools and processes to accelerate solution deployment, value realization and usage/consumption. Applies business, technical, industry, and/or enterprise knowledge to architecture or support projects to meet business and information technology (IT) requirements and resolve identified constraints.<br><br><br>Customer Centricity<br>Proactively acts as the voice of the customer/partner, sharing ideas, feedback, insights, success stories and strategic/technical input with Engineering teams, Product Offerings teams and internal communities leveraging relevant insights from feedback tools and systems. Identifies patterns of feedback across customers/partners/territories/industries and leverages them to develop strategic and actionable insights. Presents business cases to program managers to influence product roadmaps, decision making, bug fix prioritization, and own and drive initiatives as appropriate.<br><br>Identifies and/or translates customer/partner problems into industry solutions aligned with Microsoft product and platform strategy, and explains why and/or how they meet customer/partner outcomes and return on investment (ROI) goals (e.g., via proof of concept, minimally viable product [MVP], rapid prototype) relative to competitive offerings. Proactively helps the customer/partner adopt and use Microsoft product/platform strategy-aligned (cross-solution area) solutions. Builds relationships with technical decision makers (TDMs), and helps build the bridge between TDMs and business decision makers (BDMs). Independently interacts as needed with customers/partners' Chief Information Officer (CIO), Chief Information Security Officer (CISO) and other C-level (CXO) roles to bridge understanding of security, compliance, operational and risk requirements across BDMs, TDMs, CIO and CISO teams, appropriately engaging additional subject matter experts when deeper expertise is required.<br><br>Drives self and guides other team members to focus on customer/partner experience through efficient delivery and ensuring a seamless and connected customer experience. Defines customer/partner conditions of success by leveraging an understanding of customer goals. Anticipates and addresses customer/partner dissatisfaction and unmet needs, and executes strategies to improve customer experience, value realization, and acceleration of transformation.<br><br><br>Partner Specialization<br>Identifies and prioritizes several opportunities that align with revenue goals, and orchestrates growth of solution utilization pipeline with partners. Provides assistance with partner and sales teams to bring clarity to specific opportunities through proof of concept and technical pre-sales support.<br><br>Understands solution area-specific market opportunities (e.g., competitor insights) and collaborates with Global Partner Solutions (GPS) business stakeholders to lead and execute initiatives to translate opportunities into actions. Proactively guides and supports partners in developing repeatable offerings, practices, products, and solutions. Advises the partner throughout initial strategic customer implementations.<br><br><br>Technical Leadership<br>Leverages market insights and demand signals to assist leadership in identifying relevant areas in which to drive up-skilling and/or accreditations based on demand. Role models technical readiness, both depth-aligned to solution area priorities and breadth-aligned to Customer Success Unit (CSU)/corporate initiatives (e.g., security, resilience, AI), and influences team to drive their own technical readiness. Acts as a mentor, leading readiness and upskilling activities in the team/organization by educating colleagues on technical and non-technical concepts and sharing proven practices.<br><br>Contributes to leading virtual teams (v-teams) around technologies and customer/partner challenges, and shares ideas, insights, and strategic, technical input with technical teams, internal communities across the field, and the larger virtual team across Microsoft using knowledge of Microsoft architectures and their context in the competitive landscape. Demonstrates strong industry knowledge and increases recognition for Microsoft solutions by contributing to and sometimes leading presentations and engagements with external and internal audiences (e.g., Tech Connect, Build, Ignite) Contributes to intellectual property (IP) and identifies patterns where no IP exists (e.g., CoPilot and AI scenarios) to help build scalable and repeatable models. Participates in external technical and non-technical community events (e.g., conferences, seminars, technical meetups, webcasts, blogs, hackathons) that elevate the Microsoft brand and shares learnings across internal teams.<br><br>Proactively identifies gaps through delivery, communicates those gaps to relevant team members and internal/external stakeholders, and connects gaps and patterns across business and technology areas that drive changes and improvements to products, intellectual property (IP) (both existing and new), technologies, and/or processes/practices that enable solutions to scale across customers. Contributes to the development and modification of Microsoft's structured frameworks and methodologies. Provides thought leadership and innovation to customers/partners and internal communities at the local level.<br><br><br><br><b>Qualifications</b><br><p>Required/minimum qualifications</p><br>Bachelor's Degree in Computer Science, Information Technology, Engineering, Business, Liberal Arts, or related field AND 4+ years experience in cloud/infrastructure technologies, information technology (IT) consulting/support, systems administration, network operations, software development/support, technology solutions, practice development, architecture, and/or consulting OR equivalent experience.<br>Additional or preferred qualifications<br>Bachelor's Degree in Computer Science, Information Technology, Engineering, Business, Liberal Arts, or related field AND 8+ years experience in cloud/infrastructure technologies, information technology (IT) consulting/support, systems administration, network operations, software development/support, technology solutions, practice development, architecture, and/or consulting OR Master's Degree in Computer Science, Information Technology, Engineering, Business, Liberal Arts, or related field AND 6+ years experience in cloud/infrastructure technologies, technology solutions, practice development, architecture, and/or consulting OR equivalent experience.<br>4+ years experience working in a customer-facing role (e.g., internal and/or external).<br>4+ years experience working on technical projects.<br>Technical Certification in Cloud (e.g., Azure, Amazon Web Services, Google, security certifications).<br><br> <br><p>This position will be open for a minimum of 5 days, with applications accepted on an ongoing basis until the position is filled.</p><br><br><br><p>Microsoft is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, citizenship, color, family or medical care leave, gender identity or expression, genetic information, immigration status, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran or military status, race, ethnicity, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable local laws, regulations and ordinances. If you need assistance with religious accommodations and/or a reasonable accommodation due to a disability during the application process, read more about <b><u>requesting accommodations.</u></b></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Long Description <br><br>Job Summary <br></span><p>Electronic service technicians are responsible for diagnosing, repairing or replacing parts for all household appliances.</p><br> <br><br>Job Responsibilities <br><p>·&nbsp;&nbsp; &nbsp;Pre-screen, identify, analyse, and repair appliance and electronic product failures to ensure complete customer satisfaction.<br> ·&nbsp;&nbsp; &nbsp;Configuring/troubleshooting experience with hardware, including audio-DSP, A/V control, video and audio devices, and USB based software applications.<br> ·&nbsp;&nbsp; &nbsp;Order necessary parts after initial pre-screen so they are in hand before going to customers' premises.<br> ·&nbsp;&nbsp; &nbsp;Perform daily administrative functions to include warranty claims and report submissions.<br> ·&nbsp;&nbsp; &nbsp;Maintain performance objectives as required by the company.<br> ·&nbsp;&nbsp; &nbsp;Maintain company vehicle, tools, equipment and parts inventory.<br> ·&nbsp;&nbsp; &nbsp;Rely on personal judgment for work safety.<br> ·&nbsp;&nbsp; &nbsp;Work independently without onsite supervision.<br> ·&nbsp;&nbsp; &nbsp;Track service documents and installation actions by completing forms, reports, logs, and records.<br> &nbsp;</p><br> <br><br>Candidate Requirements <br><p>·&nbsp;&nbsp; &nbsp;3 to 5 years of field service experience in all major home appliances.<br> ·&nbsp;&nbsp; &nbsp;Possess appropriate Refrigerant Handling Certificate(s), CET, (HVAC) and other applicable appliance or electronics service certifications.<br> ·&nbsp;&nbsp; &nbsp;Knowledge and proficient use of electronics, appliance and/or refrigeration tools and diagnostic test equipment.<br> ·&nbsp;&nbsp; &nbsp;Proficient in MS Office and Smartphone technology with the ability to quickly learn proprietary software applications.<br> ·&nbsp;&nbsp; &nbsp;Valid driver's license with a clear driving record.<br> ·&nbsp;&nbsp; &nbsp;Meet physical requirements generally associated with field service repair (lifting, bending, etc.).<br> ·&nbsp;&nbsp; &nbsp;Ability to work a flexible schedule based on business needs.<br> ·&nbsp;&nbsp; &nbsp;Excellent communication, organization and customer service skills.<br> &nbsp;</p><br> <br><br>Education <br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Job Detail <p>Get the latest details.</p><br> <br> <p><b>Our Mission</b></p><br><p>At Palo Alto Networks®, we’re united by a shared mission—to protect our digital way of life. We thrive at the intersection of innovation and impact, solving real-world problems with cutting-edge technology and bold thinking. Here, everyone has a voice, and every idea counts. If you’re ready to do the most meaningful work of your career alongside people who are just as passionate as you are, you’re in the right place.</p><br><p><b>Who We Are</b></p><br><p>In order to be the cybersecurity partner of choice, we must trailblaze the path and shape the future of our industry. This is something our employees work at each day and is defined by our values: Disruption, Collaboration, Execution, Integrity, and Inclusion. We weave AI into the fabric of everything we do and use it to augment the impact every individual can have. If you are passionate about solving real-world problems and ideating beside the best and the brightest, we invite you to join us!</p><br>This role is remote, but distance is no barrier to impact. Our hybrid teams collaborate across geographies to solve big problems, stay close to our customers, and grow together. You will be part of a culture that values trust, accountability, and shared success where your work truly matters.<p><b>Job Summary</b></p><br><p><b>Your Career</b></p><br><p><br>The Solutions Consultant is the evolution of the traditional Sales Engineering role, aligning how we best serve our customers in understanding their environment, providing solution guidance and ensuring value realization in their investment with Palo Alto Networks. As a Solutions Consultant you provide technical leadership and expertise and guidance in your customer’s security transformation journey. You will play a key role in defining technical solutions that secure a customer’s key business imperatives and ensuring value realization of their investment with Palo Alto Networks. You evangelize our industry leadership in on-prem, cloud, and security operations services that establish PANW as your customer’s cybersecurity partner of choice.</p><br><p><br><b>Your Impact</b></p><br><ul><li>Curiosity is core to the Solutions Consultant role, and you see complex problems as opportunities to learn and deliver innovative solutions! You define your impact by:</li><li>Meeting and exceeding sales quotas by building and implementing strategic, technical account plans that target cross-platform solutions</li><li>Understands Key customer business requirements and has the ability to position, demonstrate and create high level designs across the entire PANW portfolio solutions creating business value for customers</li><li>Ability to drive customer adoption of Palo Alto Networks Platform. Building customer relationships by helping customers achieve increased productivity, operational efficiency, security efficacy, and greater flexibility to innovate</li><li>Conducting discovery to understand and articulate the key technical, operational, and commercial imperatives of your prospects and customers</li><li>Working closely with Professional Services, Customer Success and Specialist teams to ensure overall customer implementation and adoption of solutions</li><li>Demonstrating strong communication skills, influencing through effective presentations and customer-specific demos, and conducts technical engagements and workshops that are clear and impactful, simplifying complex ideas for various audiences</li><li>Leading successful technical validation efforts based on best practices to ensure technical win in assigned opportunities</li><li>Demonstrates Cross functional leadership driving collaboration and orchestrating supporting resources (Specialists, Channel Resources, Customer Support) to ensure a one-team approach that demonstrates a cohesive strategy</li><li>Promoting end-to-end solutions that include PANW and/or partner professional services to ensure customers realize business value sooner</li><li>Understanding the competitive landscape and effectively differentiating PANW's leadership in the cybersecurity space</li><li>Continuously investing in yourself to develop technical and professional skills that drive your ever-increasing contributions to success of our customers while actively participating within the Solutions Consultant community and at industry events</li><li>Identifying technical stakeholders and cultivating relationships with key personas to build and drive a security architecture transformation roadmap</li></ul><p><b>Qualifications </b></p><br><b>Your Experience</b><br><ul><li>6+ years experience in pre-sales/sales engineering</li><li>Skilled in at least one of the following Networking, Network Security, Cybersecurity, Private/Public Cloud Security, SOC/Endpoint or SASE</li><li>Experience in delivering cybersecurity solutions that solve technical challenges and influence new business initiatives is preferred</li><li>Influencing and gaining buy-in from key stakeholders, either in a customer-facing or internal role; prior experience in a pre-sales role is ideal</li><li>Creating and delivering technical presentations, workshops, or technical validation engagements</li><li>Experience in selling, designing, implementing, or managing one or more of the following solutions: Network Security, SASE, SaaS, CNAPP and/or SOC Transformation Technologies</li><li>Partnering with Customer Support functions to ensure successful implementation and adoption of sold solutions</li><li>Experience in complex sales involving long sales processes with multiple buying centers and multi-product solutions are preferred</li><li>This is a field sales position where travel requirements may be required to support in person customer meetings, please discuss with the recruiter on the specifics for this position.</li><li>Proficient in English and Arabic</li></ul><p><b>Our Commitment </b></p><br><p>We’re trailblazers that dream big, take risks, and challenge cybersecurity’s status quo. It’s simple: we can’t accomplish our mission without diverse teams innovating, together.</p><br><p>We are committed to providing reasonable accommodations for all qualified individuals with a disability. If you require assistance or accommodation due to a disability or special need, please contact us at <span><u>accommodations@paloaltonetworks.com</u></span>.</p><br><p>Palo Alto Networks is an equal opportunity employer. We celebrate diversity in our workplace, and all qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or other legally protected characteristics.</p><br><p>All your information will be kept confidential according to EEO guidelines.</p><br>Is role eligible for Immigration Sponsorship? No. Please note that we will not sponsor applicants for work visas for this position. <br> <br> Apply <p>Current Employees, apply here</p><br> <br> <br> </div>

<p>Date Posted: 2026-08-12</p><p>This position is located in Kuwait.</p><p>What You Will Do : The Patriot Power Generation Frequency Converter Maintenance Technician supports the Kuwait Air Defense Force (KADF) Patriot program. Participates in power frequency convertor improvement and repair on the KADF Patriot systems. Shall be responsible for the repair and maintenance of all generators to include installation, Preventive Maintenance Checks and Services (PMCS), and operations. Will also coordinate with generators in the daily operations, repair, maintenance, PMCS, and generator fueling. Provides technical and engineering advice to the KADF Patriot program leadership. Participate in preventive maintenance operations at all maintenance levels. Performs troubleshooting, fault isolation and field maintenance repair for all frequency convertors for all systems. Functionally tests power frequency convertors after making repairs to assure compliance with design specifications and standards. Participates in the opening and closing of work orders and in on-the-job training (OJT). Implements approved engineering changes. Enforces approved KADF safety policies, procedures, and standards. Performs job related duties as specified by the user unit.</p><p><strong>Desired Candidate Profile</strong></p><h2>Qualifications You Must Have :</h2><ul><li>Graduate from technical school in electronics or manufacturer's course of instruction on power frequency convertors, or equivalent on-the-job training (OJT).</li><li>Must have a minimum of five (5) years experience in troubleshooting and repair of power frequency convertors.</li><li>Must be proficient in troubleshooting, fault isolation and repair of various types of power frequency convertors.</li><li>Skill in the use of engineering drawings, schematic diagrams, general purpose commercial test equipment and common tools is required.</li><li>Proficiency in the English language, spoken and written.</li><li>Requires current SECRET Clearance</li></ul><h2>Qualifications We Prefer:</h2><ul><li>Knowledge of the Patriot Missile System</li></ul><h2>Required Education:</h2><ul><li>Bachelor s Degree with 5 years of related experience, or Associates Degree with 8 years experience or HS Diploma/GED with 12 years of related experience.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities Job Details / Position Summary The Aviation Support Equipment Technician diagnoses malfunctions repairs and maintains Support Equipment (SE); inspects and approves completed maintenance actions; troubleshoots discrepancies by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and historical maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs SE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on SE by inspecting, testing and operating SE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components, as well as stenciling and marking SE, storing, handling, labelling, using and disposing of hazardous materials and hazardous waste. The Technician prepares SE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles, to include Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety awareness. Description: • Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify/inspect work performed by other technicians for which he/she is qualified to perform.• Reviews, interprets, and applies maintenance procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data• Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.• Performs “O”, “I” and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals.• Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications.• Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins.• Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. • Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. and performs proper handling and disposal of chemicals and petroleum products required during maintenance.• Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system.• Performs close tolerance adjustment, repair and rework of equipment in and out of shop area.• Services, inspects and tests aviation support equipment used for direct and indirect aircraft support.• Troubleshoots, inspects, services, tests and re-conditions storage batteries, to include lead-acid, gel and sealed type.• Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE).• Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment.• Conducts off station maintenance when required.• When necessary, perform other duties and functions critical to the support of the program. Qualifications Education / Certifications: • High School Diploma • Must be able to obtain/maintain the following required certifications/qualifications: Applicable Support Equipment licensing: + “I” Level &amp; “O” Level Tire &amp; Wheel certification + Hydraulic Contamination certification + Collateral Duty Inspector (CDI) qualification + Corrosion Prevention and Control and Aircraft Paint qualification + “I” Level Battery Maintenance certification Experience: • Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted. • Naval Aviation Maintenance Program (NAMP) 4790.2 or equivalent experience with Air Force Instruction 21-101 preferred. • Must have a working knowledge of first aid procedures to be used in an emergency. • Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures). Specific Requirements: This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance. • Must be United States (U.S.) citizen , be able to read, write, and understand the English language • Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration. • Must have a valid U.S. Driver’s License. • Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements. • Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc…) as required by local policies. • Must be willing and able to comply with all program functional requirements to include but not limited to: The performance of “I” Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp; MLG Tire re-building, MLG Brake repair/rebuilding, Battery maintenance support, and Oxygen Regulator testing/repair. • Must be willing and able to deploy off-site as required to support Kuwait Air Force operations. • Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required. • Must have the ability to communicate clearly, concisely and follow instructions when directed on assigned tasks. • Have a strong knowledge base of intermediate level maintenance business practices and procedures • Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions. • As a Subject Matter Expert, must be willing to perform in-depth research, troubleshoot, and perform “O” level, “I” level, and commercial level maintenance functions on all applicable SE systems and components necessary to return equipment to a Ready for Issue (RFI) status; this includes determining material requirements, researching part numbers, ordering, tracking, and receiving materials as required to facilitate SE inspections/repairs. • Must be able to communicate directly with the customer, pilots, air crew members, management, and maintenance personnel to gather and relay pertinent data/information necessary to ensure equipment is available to support aircraft launches and maintenance. • Must have an in-depth knowledge of applicable technical orders/job guides/publications—read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications. • Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations. • Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations. • Must perform as a team member, contributing to the success of the KC-130J / Common Support Equipment (CSE) Program. • Must be willing and able to work with hazardous materials and conduct specialty on-the-job training. • Must be dependable and timely in managing assigned tasks, perform consistent quality maintenance. • Must have a proven ability to work independently with minimal direction. Material &amp; Equipment Directly Used Uses digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, diagnosing software, circuit card testers, transistor testers, and hand tools to analyze, diagnose, and repair applicable Support Equipment. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds What We Bring: At V2X we strive to be market competitive in our total reward offerings. Employee benefits include the following: • Healthcare coverage • Life insurance, AD&amp;D, and disability benefits • Retirement plan • Wellness programs • Paid time off, including holidays and leave of absences • Eligible Tuition Reimbursement • Learning and Development resources • Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p>Perform installation, commissioning, maintenance, and repair activities for GIS equipment, including circuit breakers, disconnectors, and earthing switches. Conduct routine inspections, diagnostic testing, and preventive maintenance on GIS systems to identify and address potential issues. Troubleshoot complex GIS malfunctions, determine root causes, and implement effective corrective actions. Develop and execute maintenance procedures and schedules in accordance with manufacturer specifications and industry best practices. Share technical knowledge and provide guidance to technicians and engineers on GIS operation and maintenance. Collaborate with engineering and project teams on GIS design reviews, upgrades, retrofits, and modifications. Maintain accurate records of maintenance activities, repairs, testing results, and equipment performance data. Ensure compliance with all applicable health, safety, environmental, quality, and regulatory requirements during GIS operations and maintenance activities. Prepare technical reports, service documentation, and recommendations related to GIS performance and reliability. Support emergency response activities and provide timely assistance during critical equipment failures, as required. You will be responsible for ensuring compliance with applicable external and internal regulations, procedures, and guidelines. Living Hitachi Energy s core values safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in Electrical Engineering, Power Systems Engineering, or a related field. Minimum of 7 years of experience working with Gas Insulated Switchgear (GIS) systems. Strong knowledge of GIS components, operating principles, and common failure modes. Proven experience in GIS installation, commissioning, maintenance, and troubleshooting activities. Familiarity with applicable international and national electrical safety standards and regulations. Ability to read and interpret electrical schematics, single-line diagrams, and technical drawings. Strong analytical and problem-solving skills, with the ability to diagnose and resolve complex electrical issues. Excellent communication and interpersonal skills, with the ability to collaborate effectively with cross-functional teams and customers. Ability to work independently, prioritize responsibilities, and manage multiple tasks simultaneously. Valid driver's license and willingness to travel to project sites as required. Experience with Hitachi Energy GIS products and systems is considered a strong advantage</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Mechanical Maintenance Technician – Flexible Packaging Industry (Kuwait)</p><p><br></p><p>We are looking for an experienced Mechanical Maintenance Technician to join our flexible packaging and printing facility in Kuwait. The ideal candidate will have hands-on experience maintaining and troubleshooting printing, lamination, slitting, and packing line machinery.</p><p><br></p><p>Key Responsibilities:</p><p><br></p><p>Perform preventive and corrective maintenance on production machinery (printing presses, laminators, slitters, packing equipment)</p><p>Diagnose and repair mechanical faults to minimize downtime</p><p>Conduct routine inspections and lubrication schedules per maintenance plans</p><p>Perform roll calibrations to ensure accurate tension, alignment, and print/lamination quality</p><p>Conduct root cause analysis on equipment failures and implement corrective/preventive actions</p><p>Monitor and report on machine efficiency (OEE/downtime tracking) to identify improvement areas</p><p>Coordinate spare parts requirements and maintain maintenance records/logs</p><p>Support installation, alignment, and calibration of new or upgraded equipment</p><p>Work closely with production and QC teams to ensure machine readiness and output quality</p><p>Follow all safety procedures and report hazards or equipment issues promptly</p><p>Requirements:</p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Diploma B-Tech in Mechanical Engineering or related technical field</p><p>3+ years of hands-on maintenance experience, preferably in flexible packaging, printing, or related manufacturing industries</p><p>Strong knowledge of mechanical systems, pneumatics, hydraulics, and rotating equipment</p><p>Ability to read technical drawings and equipment manuals</p><p>Experience with roll calibration techniques and root cause failure analysis</p><p>Good troubleshooting and problem-solving skills</p><p>Willingness to work in shifts as per operational needs</p></div>

<p><h4>Description</h4> <p>Apt Resources is seeking a skilled borewell technician to join our client's agriculture farm in Abu Dhabi, UAE. In this role, you will be responsible for the installation, maintenance, and repair of borewell systems that supply water for irrigation and farm operations. Your expertise will ensure that the farm has a reliable water source, vital for crop growth and sustainability.</p> <p>The ideal candidate will possess a strong understanding of borewell operations, troubleshooting skills, and the ability to work independently. You will collaborate closely with the farm management team to ensure efficient water management and support agricultural productivity.</p> <h4>Responsibilities</h4> <ul> <li>Install and maintain borewell systems, ensuring efficient operation and water supply.</li> <li>Conduct regular inspections and troubleshooting of borewell installations.</li> <li>Repair any malfunctions and perform routine maintenance on borewell equipment.</li> <li>Ensure compliance with agricultural water management policies and safety regulations.</li> <li>Collaborate with farm staff to optimize water usage effectively.</li> <li>Keep accurate records of maintenance activities and repairs performed.</li> </ul> <h4>Requirements</h4> <ul> <li>Proven experience as a borewell technician or similar role in agriculture.</li> <li>Strong knowledge of borewell systems, installation, and maintenance.</li> <li>Ability to troubleshoot technical issues and perform repairs.</li> <li>Excellent problem-solving skills and attention to detail.</li> <li>Ability to work independently and as part of a team.</li> <li>Good physical stamina and the capability to work in outdoor conditions.</li> </ul> <h4>Benefits</h4> <p><strong>Salary:</strong> AED 2,500 - AED 3,000 plus accommodation and food provided.</p></p><p></p>

<p>CACI is seeking a MI Systems Maintainer Integrator II to support our mission critical Program in Kuwait. As the selected candidate, you will perform installation, integration, configuration, employment, preventive maintenance, precision alignment, detailed and complicated diagnostics, troubleshooting, corrective maintenance, electronics monitoring and teardown of complex Command, Control, Communications, Computers, Intelligence, Surveillance, and Reconnaissance (C4ISR) and systems supporting SIGINT, FISINT, GEOINT, HUMINT, CI, TECHINT, OSINT, and All Source Intelligence for tasking, collection, processing, exploitation, production and dissemination at all echelons from tactical to national in multi-domain environments.</p><p>Responsibilities:</p><ul><li>Conduct installation, de-installation, reconfiguration, modification work orders and updates of computer hardware and software in local, regional, or global intelligence architectures including NIPRNet, SIPRNet, JWICS, TDN2, Special Access Programs (SAP) networks and coalition networks.</li><li>Assist with configuration assessments, fielding, testing, modernization, reset, de-fielding, demilitarization and disposal of sensitive equipment.</li><li>Inspect, test, diagnose, troubleshoot, repair and perform preventive maintenance on complex antenna and radio frequency distribution systems.</li><li>Perform tests on electrical, electro-optical, and electro-mechanical equipment using multi-meters, oscilloscopes, signal generators, spectrum analyzers, bit error rate testers (BERT), and other complex and specialized test measurement and diagnostic equipment (TMDE), wire diagrams, logic and signal flow charts, technical manuals, troubleshooting charts, performance aids, schematic, and logic diagrams.</li><li>Repair analog and fiber optics cables.</li><li>Perform pre and post flight inspections on Guardrail Common Sensor (GRCS) mission equipment and data link.</li><li>Submit standard and non-standard repair parts requests.</li><li>Prepare equipment for transportation or shipment.</li><li>Prepare maintenance, property accountability, and transportation forms and records.</li><li>Able to maneuver in small spaces and lift up to 50lbs.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><p>Associate Degree in Electronics or related field from an accredited college/university + 4 years of relevant experience OR Six years of military training in MI Systems Maintenance and Integration may be considered in lieu of degree</p><p>Experience on maintenance and integration on one or more of the following: GRCS; Enhanced Medium Altitude Reconnaissance Surveillance System (EMARSS) mission equipment; Tactical Command Data Link (TDCL); GRCS Operational Ground Station (OGS); Distributed Common Ground Station- Army (DCGS-A); software defined SIGINT collection platforms; biometrics collection, processing, exploitation, and dissemination equipment; CI/HUMINT support systems; TROJAN systems or satellite communication terminals providing TDN2; TENCAP systems; or intelligence non-standard equipment.</p><p>Information assurance certifications for Tier I and II computer, servers, networks and global intelligence architectures integration and maintenance are desired.</p><p>US Citizen with active TS/SCI clearance is required</p><p>Willing to work shift work, to include weekends and potentially holidays.</p><p>Must be able to meet the requirements to obtain a work Visa 18 for Kuwait</p>