Maintenance Engineer Jobs - Capital Governorate (Kuwait) Kuwait

<p>Urgent Hiring – Project Engineer | Kuwait Engineers India Limited (EIL) is hiring experienced professionals for a client project based in Kuwait. • Location: Client Site, Kuwait Key Responsibilities: • Coordinate engineering and construction activities. • Monitor project progress, schedules, and deliverables. • Liaise with clients, contractors, and multidisciplinary teams. • Ensure compliance with project specifications, quality, HSE, and client requirements. • Prepare and review technical documentation and project reports. • Support project planning, execution, and close-out activities. Preferred Skills: • Strong project coordination and communication skills. • Knowledge of engineering standards and project management practices. • Ability to work in a multidisciplinary team environment. • Proficiency in MS Office and project documentation. Employment Type: • Client Site Deployment (Kuwait)</p><p> • Minimum 10 years of relevant experience • Educational background in Electrical, Instrumentation, Mechanical, Civil, or Chemical Engineering Experience: • Minimum 10 years of relevant experience in engineering projects. • Experience in project execution, coordination, construction, or maintenance is preferred. Educational Qualification: • Bachelor's Degree in Electrical, Instrumentation, Mechanical, Civil, or Chemical Engineering. Preferred Industry: • Oil & Gas / Petrochemical / Refinery / EPC / Industrial Projects</p>

<p><h4>Job summary</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance.</p> <p>Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements.</p> <p>USAF equivalent position is Munitions/Weapons Technician Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li> <li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li> <li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li> <li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li> <li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li> <li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li> <li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li> <li>Maintain weapons certification and currency.</li> <li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li> <li>Perform all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft munitions/weapons maintenance experience required.</li> <li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li> <li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Munitions/weapons experience within the last 10 years.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Prepares weekly, monthly, quarterly, and annual utilization schedules for maintenance. Maintains proficiency in operations of the USAF Maintenance Information System including Core Automated Maintenance System (CAMS), Centralized Engine Management System (CEMS), and other maintenance management database library programs. Maintains equipment records in library files. Collects, reviews, and files documented information for planning and scheduling of various maintenance activities. Ensures accurate documentation is maintained for aircraft engines, munitions, missiles, AGE configurations, Time Compliance Technical Orders, time change items, and special inspections.</p> <p>USAF equivalent position is Aircraft Scheduling & Documentation Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Assist in the preparations of the weekly, monthly, quarterly, and annual utilization schedules for maintenance.</li> <li>Will oversee TCTO process for completion and proper documentation with IMDS and/or CEMS.</li> <li>Maintains assigned aircraft/equipment records in database library files within IMDS and/or CEMS.</li> <li>Assists in the collection, review, and filing of documented information for planning and scheduling of RPA maintenance activities.</li> <li>Ensure accurate documentation is maintained for aircraft engines, munitions, missiles, AGE configurations, Time Compliance Technical Orders, time change items, and special inspections.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one-year actual aircraft plans & scheduling experience required.</li> <li>Must possess basic planning and organizational skills.</li> <li>Must be able to work under deadlines with minimal supervision.</li> <li>Must be able to gain/maintain CEMS access for engine management purposes.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have a current/active U.S. driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Plans and scheduling experience within the last 10 years.</li> <li>RPA operations & deployment experience.</li> <li>Previous experience as engine manager with CEMS experience.</li> <li>Prior experience as a defense contractor.</li> <li>Previous MQ-9 plans and scheduling experience desired.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Design / Technical Engineer is responsible for assisting the PSD team to deliver safe, efficient, and reliable product and service delivery for our customers. The Design / Technical Engineer develops and delivers optimized technical job designs for the area of responsibility. This person identifies opportunities for continuous improvement of service delivery and formally communicate findings, and supports the Product Line in risk management and apply lessons learned to improve job design. The Design / Technical Engineer provides real-time support to PSD operations as required, and is responsible for the COSD (i.e. resource consumption). Develop technical job designs as required for the Product Line. Identify areas where new and cost-effective techniques can be applied. Explore opportunities for value-added products and services. Provide technical support throughout the service delivery process. Understand and communicate value of technology and interpretations. Consult with relevant subject matter experts as required to optimize the technical design. Support the OU PSD and/or PSD Manager in the execution phase with design changes as required due to changes in job dimensions, resource availability, service quality incidents, etc. Assist in incident response, recovery, and incident investigation. Support multiple Product Line operations in a collaborative optimized job design. Assist sales and commercial team in evaluating technical viability and tenders. Analyze job execution vs. design and formally capture design improvements and optimization opportunities (lessons learned and best practices).</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>10+</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance. Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements. USAF equivalent position is Munitions/Weapons Technician Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li><li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li><li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li><li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li><li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li><li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li><li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li><li>Maintain weapons certification and currency.</li><li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li><li>Perform all other duties as assigned or requested.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must have High School diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required.</li><li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li><li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li><li>Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications:</p><ul><li>Associate degree in a relevant career field.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Munitions/Weapons experience within the last 10 years .</li></ul><p></p></section>

<p>About the Role: We are seeking a skilled Technical Engineer to provide technical support for marine construction and offshore projects. The ideal candidate will be responsible for reviewing designs, preparing technical documentation, coordinating with engineering teams, and ensuring that project activities comply with specifications, codes, and client requirements. Key Responsibilities: • Review and interpret engineering drawings, specifications, and technical documents for marine construction projects • Prepare technical submittals including method statements, calculations, and material specifications • Coordinate with design engineers, project managers, and site teams to resolve technical issues • Ensure all technical activities comply with project specifications, international codes (ISO, BS, ASTM, API), and client requirements • Assist in preparing and reviewing shop drawings, as-built drawings, and technical reports • Provide technical support during construction, installation, and commissioning phases • Conduct technical inspections and quality checks to verify compliance with approved documents • Liaise with clients, consultants, subcontractors, and suppliers on technical matters • Review and approve subcontractor technical submittals and material approvals • Prepare technical queries (TQs) and coordinate with consultants for resolution • Support procurement team in technical evaluation of suppliers and materials • Maintain accurate technical documentation and filing systems • Assist in preparing project close-out reports and technical handover documents • Stay updated on latest engineering standards, technologies, and industry best practices • Provide training and guidance to junior engineers and site staff</p><p>Qualifications & Experience: • Bachelor's degree in Civil Engineering, Mechanical Engineering, Marine Engineering, or related field • Minimum 5+ years of experience as Technical Engineer in marine, construction, or oil & gas industries • Strong knowledge of engineering principles, codes, and standards (ISO, BS, ASTM, API, etc.) • Experience with marine construction, piling, subsea pipelines, or offshore structures is highly preferred • Proficiency in engineering software such as AutoCAD, STAAD Pro, or similar • Familiarity with project documentation and technical submittal processes • Strong understanding of quality assurance and quality control (QAQC) principles • Valid safety certifications (NEBOSH, IOSH, OSHA) preferred • Fluency in English; Arabic or Hindi/Urdu is a plus • Professional membership (e.g., ICE, IMarEST) is an advantage Required Skills: • Strong technical knowledge and analytical abilities • Good communication and coordination skills • Attention to detail for documentation and compliance • Problem-solving and technical troubleshooting skills • Ability to work under pressure and meet deadlines • Team collaboration with engineering, procurement, and construction teams</p>

<p><h4>Job summary</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance.</p> <p>Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements.</p> <p>USAF equivalent position is Munitions/Weapons Technician Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li> <li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li> <li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li> <li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li> <li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li> <li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li> <li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li> <li>Maintain weapons certification and currency.</li> <li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li> <li>Perform all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft munitions/weapons maintenance experience required.</li> <li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li> <li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Munitions/weapons experience within the last 10 years.</li> </ul></p><p></p>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance. Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements. USAF equivalent position is Munitions/Weapons Technician Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li><li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li><li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li><li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li><li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li><li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li><li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li><li>Maintain weapons certification and currency.</li><li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li><li>Perform all other duties as assigned or requested.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have High School diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required.</li><li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li><li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li><li>Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications:</p><ul><li>Associate degree in a relevant career field.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Munitions/Weapons experience within the last 10 years .</li></ul>

<p>About the Role: We are seeking a skilled Technical Engineer to provide technical support for marine construction and offshore projects. The ideal candidate will be responsible for reviewing designs, preparing technical documentation, coordinating with engineering teams, and ensuring that project activities comply with specifications, codes, and client requirements. Key Responsibilities: • Review and interpret engineering drawings, specifications, and technical documents for marine construction projects • Prepare technical submittals including method statements, calculations, and material specifications • Coordinate with design engineers, project managers, and site teams to resolve technical issues • Ensure all technical activities comply with project specifications, international codes (ISO, BS, ASTM, API), and client requirements • Assist in preparing and reviewing shop drawings, as-built drawings, and technical reports • Provide technical support during construction, installation, and commissioning phases • Conduct technical inspections and quality checks to verify compliance with approved documents • Liaise with clients, consultants, subcontractors, and suppliers on technical matters • Review and approve subcontractor technical submittals and material approvals • Prepare technical queries (TQs) and coordinate with consultants for resolution • Support procurement team in technical evaluation of suppliers and materials • Maintain accurate technical documentation and filing systems • Assist in preparing project close-out reports and technical handover documents • Stay updated on latest engineering standards, technologies, and industry best practices • Provide training and guidance to junior engineers and site staff</p><p>Qualifications & Experience: • Bachelor's degree in Civil Engineering, Mechanical Engineering, Marine Engineering, or related field • Minimum 5+ years of experience as Technical Engineer in marine, construction, or oil & gas industries • Strong knowledge of engineering principles, codes, and standards (ISO, BS, ASTM, API, etc.) • Experience with marine construction, piling, subsea pipelines, or offshore structures is highly preferred • Proficiency in engineering software such as AutoCAD, STAAD Pro, or similar • Familiarity with project documentation and technical submittal processes • Strong understanding of quality assurance and quality control (QAQC) principles • Valid safety certifications (NEBOSH, IOSH, OSHA) preferred • Fluency in English; Arabic or Hindi/Urdu is a plus • Professional membership (e.g., ICE, IMarEST) is an advantage Required Skills: • Strong technical knowledge and analytical abilities • Good communication and coordination skills • Attention to detail for documentation and compliance • Problem-solving and technical troubleshooting skills • Ability to work under pressure and meet deadlines • Team collaboration with engineering, procurement, and construction teams</p>

<p><h4>About Jumeirah</h4> <p>Jumeirah, a global leader in luxury hospitality and a member of Dubai Holding, operates an exceptional portfolio of 29 properties across 11 countries in the Middle East, Europe, and Asia. In 1999, Jumeirah changed the face of luxury hospitality with the opening of the iconic Jumeirah Burj Al Arab and the brand is now renowned worldwide for its distinguished beachfront resorts, esteemed city hotels and exclusive residences. From the contemporary Maldivian island paradise at Jumeirah Olhahali Island to the art-inspired Jumeirah Capri Palace in Italy and the modern twist on a British classic at Jumeirah Carlton Tower in London, the brand has become synonymous with warm and generous service and the ability to craft distinctive and purposeful experiences that bring joy to guests from across the world.</p> <h4>About Jumeirah Messilah Beach</h4> <p>Jumeirah Messilah Beach is a beachfront resort in Kuwait, set in a secluded location with easy access to the city’s business district, airport and main attractions. The property offers a range of dining destinations, wellness experiences at Talise Spa, and dedicated facilities for meetings and events. Ideal for both business and leisure, it blends comfort, connectivity, and Arabian hospitality.</p> <h4>About the Job</h4> <p>An exciting opportunity has arisen for a Plumbing Technician to join the Engineering team at Jumeirah Messilah Beach.</p> <p>The main duties and responsibilities of this role include:</p> <ul> <li>Carry out preventive and corrective maintenance on all plumbing systems including water supply lines, drainage systems, pumps, water heaters, and sanitation fixtures.</li> <li>Inspect and repair leaks, clogs, and malfunctions in guest rooms, public areas, and service areas.</li> <li>Maintain proper and safe condition of all plant, plant rooms, equipment and work areas.</li> <li>Comply with JEMS and all fire, life, health, and safety standards.</li> <li>Install, replace, and maintain plumbing fixtures such as faucets, sinks, toilets, showers, and valves.</li> <li>Maintain and service water filtration, softening, and treatment systems.</li> <li>Maintain hot and cold-water systems, including calorifiers, boilers, circulation pumps, swimming pools, and fountains.</li> </ul> <h4>About You</h4> <p>The ideal candidate for this position will have the following experience and qualifications:</p> <ul> <li>Hold a diploma or certificate in plumbing / mechanical maintenance or related technical field.</li> <li>Demonstrate good oral and written communication is an advantage.</li> <li>Have at least a grade 10 level in education with a good moral background in educational attainment.</li> <li>Possess software competencies – Microsoft Office programs (intermediate).</li> <li>Have 1+ years of experience in the technical department.</li> </ul> <h4>About the Benefits</h4> <p>Besides generous F&B benefits and reduced hotel rates across our hotels globally, this role has excellent employee benefits making the role attractive to high performers and any applicant who likes to associate himself or herself with one of the most luxurious brands in the hospitality industry.</p></p><p></p>

<p><h4>Principal accountabilities</h4> <p>Inspects and approves completed maintenance actions, solves repair problems by studying drawings, wiring diagrams and schematics, and technical publications.<br> Inspects, instructs, services and certifies individual and crew equipment.<br> Order, receive and inventory kits and components.<br> Resolve shipping discrepancies.<br> Ensure proper fit of crew member clothing.<br> Maintain ALSE and NVD for DoS and DI personnel.<br> Maintain computerized inventories and records to ensure timely and accurate compliance with inspection intervals.<br> Provides instruction to contractor and host nation personnel regarding the proper use and care of equipment.<br> Perform other duties as assigned.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent is required.<br> One (1) year verifiable experience as an ALSE technician.<br> Must possess a certificate of training as a school trained ALSE technician.<br> Valid US passport (minimum 2.5 years validity) required for deployment to Germany.<br> Ability to obtain and maintain a US government security clearance, NAC-I T1 public trust. US citizenship is required to obtain a T1/CAC NACI clearance.<br> Must meet and be able to pass CENTCOM medical requirements prior to deployment.<br> Ability to obtain a favorable background check for Kuwait PCC and obtain a Kuwait visa.</p> <h4>Knowledge & skills</h4> <ul> <li>CMF 92 supply & services MOS series or other military/commercial equivalent (92R MOS preferred).</li> <li>Must have working knowledge of aircrew and aircraft LSE requirements for extreme environmental and high risk areas of operation.</li> <li>Must be able to ascertain LSE requirements for a multi-type aircraft environment.</li> <li>Must have knowledge of basic theory of flight and aircraft systems nomenclatures.</li> <li>Must have knowledge of flight line/ramp safety procedures and aircraft fire-fighting procedures.</li> <li>Must have knowledge of aviation maintenance data systems and associated documentation/forms.</li> <li>Must have knowledge of life support equipment maintenance tools and tool control procedures.</li> <li>Must be knowledgeable of principles of instruction.</li> <li>Must have knowledge of seat kit survival components.</li> <li>Must have knowledge of aircrew life raft and life preserver inspections/maintenance.</li> <li>The ability to obtain and maintain a moderate risk public trust (MRPT) through Department of State background investigation is a condition of continued employment.</li> <li>Must possess or have the ability to obtain a U.S. passport before assignment, including renewal and additional pages if applicable.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for up to six hours per day and sit for up to two hours per day.</li> <li>Must be able to climb stairs, ramps, ladders and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to carry, push or pull up to 50 pounds.</li> <li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of seven feet.</li> <li>Must be able to communicate by voice and detect sounds.</li> <li>Must be able to distinguish color and judge three dimensional depths.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must have minimum 20/100 near and far vision, correctable to 20/20. Also must be able to focus night vision devices (NVD) at a distance of at least 20 feet.</li> <li>Be able to travel to and between remote location(s).</li> <li>Travel to austere or inhospitable high stress environments may be required.</li> <li>Ability to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure may be required.</li> <li>May be exposed to extreme noise from turbine and jet engine aircraft.</li> <li>May be exposed to fumes or airborne particles.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, and aircraft.</li> <li>Will be exposed to surface obstructions (ladders, stairs, etc.).</li> <li>May be exposed to chemical, mist, gas, vapors, ultra-violet and infra-red radiation.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship. USAF equivalent position is Aircraft Mechanic Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Performs all daily launch/recovery duties in support of operational requirements.</li><li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li><li>Supports aircraft utilization and maintenance activity schedules.</li><li>Maintains accurate parts inventory during all maintenance activities.</li><li>Performs maintenance and repair tasks and ensures their successful completion.</li><li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability.</li><li>Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li><li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc.</li><li>Diagnoses malfunctions, isolate causes and corrects breaks.</li><li>Tests engine operations, using testing equipment to locate source(s) of malfunction.</li><li>Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li><li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices.</li><li>Disassembles and inspects parts for wear, warping, or other defects.</li><li>Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li><li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories.</li><li>Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li><li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions.</li><li>May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li><li>Must be able to work with little-to-no supervision.</li><li>Performs all other duties as assigned as requested.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Mechanic maintenance experience required.</li><li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li><li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li><li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications</p><ul><li>Associate degree in a relevant career field.</li><li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Aircraft Mechanic Experience within the last 10 years.</li><li>MQ-9 Experience as an Aircraft Mechanic.</li><li>MQ-9 Aircraft Composite Repair / Replacement Experience.</li><li>Highly desired to have a U.S. Passport valid for an additional two years with at least two facing pairs (four total) of blank Visa pages.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Carrying out all maintenance activities including the repairing, installation, and removal of equipment. Watchkeeping and cleaning the machinery spaces while considering the safety of personnel, the environment, and equipment to maximize drilling operation efficiency, reliability, and safety of the rig.</p><p><strong>Roles &amp; Responsibilities:</strong></p><p><strong>Equipment Maintenance &amp; Operations:</strong> Provide engine and machinery watch keeping duties by monitoring machinery working temperatures and pressures, checking lubricating oil level readings and maintain daily log of all equipment s. Reporting any leaks, abnormal readings, vibrations or sounds to the shift supervisor as soon as possible and leakage shall be treated as a fire risk and dealt with immediately. Lubricate moving parts such as gears, shafts, and bearings on engines and auxiliary equipment. Carry out routine maintenance and minor repairs on the engine room equipment and machinery as directed. Assist with repairs to engines and equipment. Ensure that repairs needed or made are registered in the form of a work order in the company maintenance system Carry out Planned maintenance work orders on time with good quality and record actual work done, inform supervisor and Senior Tool pusher where access to perform work is not granted. Reference OEM manuals when carrying out preventative maintenance or CM work on any rig equipment do not reply solely on the preventative maintenance work instruction.</p><p><strong>Materials &amp; Equipment Keeping:</strong> Carry out stocktaking of maintenance department materials as directed. Maintain all tools and equipment in a clean and serviceable condition. Report damaged tool that require replacement to the Senior Mechanic and remove the damaged tool from service.</p><p><strong>Housekeeping:</strong> Maintain the engine and associated machine spaces and workshop clean and organized, free of hazards prior to &amp; upon completion of the work tasks, or repairs. Machine and switchboard areas to be kept clear of all flammable materials. Disposes debris as per the company s hazardous material segregations policy and as per waste management policy taking into consideration the environmental &amp; safety aspects.</p><p><strong>Job Requirements:</strong></p><p><strong>Education &amp; Experience:</strong> Formal training as mechanic in the form of a multi-year apprenticeship and or technical degree is preferred. Relevant technical certifications and experience in the oil field in related position may be considered instead of an Apprenticeship. At least one (1) year of working experience in drilling and workover operations with a reputable drilling contractor. Preferred to have working experience on Land rigs</p><p><strong>Skills/Competencies Required:</strong> Working knowledge of the English language. Situation Awareness, Communication, Teamwork.</p><p><strong>Physical Requirements:</strong> Frequent climbing (stairs, ladders). Frequent lifting, pushing &amp; pulling in accordance with Company procedure. Frequent bending, twisting, and standing. Ability to work outdoors under all extreme weather conditions (Noise / Humidity / Cold / Heat). Ability to work at heights and in confined spaces. Ability to work in day/night shift.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Education &amp; Experience:</strong> Formal training as mechanic in the form of a multi-year apprenticeship and or technical degree is preferred. Relevant technical certifications and experience in the oil field in related position may be considered instead of an Apprenticeship. At least one (1) year of working experience in drilling and workover operations with a reputable drilling contractor. Preferred to have working experience on Land rigs</p><p><strong>Skills/Competencies Required:</strong> Working knowledge of the English language. Situation Awareness, Communication, Teamwork.</p><p><strong>Physical Requirements:</strong> Frequent climbing (stairs, ladders). Frequent lifting, pushing &amp; pulling in accordance with Company procedure. Frequent bending, twisting, and standing. Ability to work outdoors under all extreme weather conditions (Noise / Humidity / Cold / Heat). Ability to work at heights and in confined spaces. Ability to work in day/night shift.</p><p><strong>Certifications:</strong> As per ADES Training Matrix.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Title: Master HVAC Technician - TS/SCI Job Category: Engineering and Technical Support Time Type: Full time Minimum Clearance Required to Start: TS/SCI Employee Type: Regular-Long Term Assignment Percentage of Travel Required: Up to 10% Type of Travel: Outside Continental US * * * The Opportunity: CACI is seeking a Master HVAC Technician to support our program in support to our mission critical client in Kuwait. As the selected candidate, you will perform inspections on HVAC systems and components (e.g. heating units, building exhaust fans, ventilation units, etc.) to evaluate condition, identify necessary repairs and recommend or perform preventive maintenance. Cleans, lubricates, and repacks the working parts of the system. Responsibilities: Tracks performance of routine and preventative maintenance to ensure availability of HVAC systems and troubleshoot HVAC/R systems with complex problems and extensive repairs requiring judgement to locate malfunctions. Respond to service calls and preventive maintenance inspections and produce reports in writing through computerized maintenance management system (CMMS) regarding malfunctioning/inoperable equipment. Responds to emergency situations during and after hours to resolve issues. Diagnoses causes of problems and/or failures in HVAC systems for the purpose of identifying equipment and/or systems repair and/or replacement needs. Install, repair, and maintain large commercial and industrial ventilation, refrigeration, air conditioning (AC), and cooling systems with complex problems and extensive repairs. Independently perform recurring work on exhaust fans, boilers, air handlers, pump, motors, air dryers, and other related HVAC equipment but not limited to HVAC control and monitoring systems. Installs, modifies, overhauls, repairs, and maintains a variety of complex HVAC equipment air conditioning, air handlers, pumps, motors, valves, heating systems, and associated auxiliary and control equipment. Works with engineering or scientific personnel to discuss plans, modifications, and user needs. Reviews available plans, specifications, or drawings; determines the size, shape, and location of equipment. Performs design, modification, maintenance and repair of critical environmental and energy support systems and associated highly sensitive state-of-the-art computerized controls and air quality monitoring systems located within US-Only areas of Intelligence and Security Command (INSCOM) Sensitive Compartmented Information Facilities (SCIFs). Provides critical advanced technical knowledge in support of unique security requirements inherent in Intelligence and Security Command (INSCOM) Sensitive Compartmented Information Facilities (SCIFs)operations including sound baffling techniques/equipment and the resolution of compromising electrical currents, as sustainment of high system availability rates. Produces classified technical documentation outlining in depth technical findings and recommendations. Provides design, emergency non-routine fault isolation of smoke removal systems, fire detection/suppression equipment used exclusively in critical, highly sensitive Military Forces installations. Performs system and subsystem diagnostics and scheduling and maintaining complex electronic environmental systems, calibration, and lubrication of unique components and controls that are used to provide and monitor precise environmental conditions within SCIFs housing unique military intelligence equipment, scientific devices, and technologies. Performs periodic, worldwide deployments in strategic and tactical mobile facility environments. Provides expert technical assistance for a 24-hour operational environment with limited documentation resources. Responds to off-duty (evening and weekend) calls to support critical system outages and to provide rapid fault isolation and resolution concerning environmental factors affecting ISR system performance to include developing technical documentation for ISR support system layouts. Supports US Army systems on site whenever and wherever deployed. Available to deploy to other countries and/or theaters to perform quick reaction technical support to US forces worldwide military contingency missions and requirements in potentially hazardous work environments. What You Can Expect: A culture of integrity. At CACI, we place character and innovation at the center of everything we do. As a valued team member, you ll be part of a high-performing group dedicated to our customer s missions and driven by a higher purpose to ensure the safety of our nation. An environment of trust. CACI values the unique contributions that every employee brings to our company and our customers - every day. You ll have the autonomy to take the time you need through a unique flexible time off benefit and have access to robust learning resources to make your ambitions a reality. A focus on continuous growth. Together, we will advance our nation's most critical missions, build on our lengthy track record of business success, and find opportunities to break new ground in your career and in our legacy. Pay Range : There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. The proposed salary range for this position is: $51,800-$106,200 CACI is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree and three years of experience College, Vocational School, or High School diploma or equivalent and a combination of 10 years education and experience with a valid Master HVAC license, or equivalent, at a State level; or 12 years experience in an equivalent Military HVAC training/certification. Specific experience in fault isolation and resolution of tactical and strategic environmental systems and their sophisticated electronic support systems. Ability to plan, install, troubleshoot and repair equipment and systems not fully covered by technical manuals, schematics, etc. 4 years experience with HVAC control and monitoring systems and their components. Experience with computerized maintenance management systems (CMMS). Expert level experience in design, installation and sustainment of computer controlled environmental systems in mobile secure facilities. Required to meet US Government accepted and industry standards criteria for technically complex computer environmental systems, uninterrupted power distribution systems, and power control equipment. Possess a North American Technician Excellence (NATE) certification. Able to maneuver in small spaces and lift up to 50lbs. US Citizen. Active TS/SCI clearance REQUIRED.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Electrical Metrology Engineer is the resident expert in his field and, in conjunction with the Kuwait Senior Engineer, provides engineering/consultant services to the Government of Kuwait (GOK). Conducts research and studies new equipment to ensure that the latest developments in technique and equipment are included in metrology planning for future acquisition. Assists in the development and implementation of a Metrology QA Program as required. Assists in obtaining and maintaining laboratory QA accreditation.</p><p>Assesses requirements and develops new measurement techniques and approaches related to electrical, electronic and microwave measurement areas. Develops, tests and evaluates new calibration methodology, as well as performs analysis and evaluation of equipment. Establishes test and performance criteria, and prescribes calibration approaches, tests, equipment and servicing requirements necessary to ensure measurement traceability. Directs, conducts and evaluates the development of calibration procedures for assigned equipment. Conducts liaison and coordinates with technical societies and engineering facilities of other countries to remain current with state-of-the- art and new measurement techniques.</p><p>Conducts detailed laboratory capability studies to achieve greater support efficiency. Develops laboratory operational, environmental, performance and safety criteria, and ensures implementation and maintenance.</p><p>It is anticipated that Engineers will be assigned as these job descriptions state and other related specific tasking details and priorities will be determined and set by the Commander, KAFMB and communicated to the Contractor lead.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requires an Associate s degree in electrical engineering, engineering technology, physics or a related technical field from an accredited college or university, and twelve (12) years of work experience operating, maintaining, troubleshooting, repairing, and calibrating electronic precision measurement equipment and calibration laboratory reference standards.</p><p>Completion of a U.S. military precision measurement and calibration school and twelve (12) years of work experience in the metrology and calibration field.</p><p>Completion of a precision measurement and calibration school at an accredited school, or within a specialized calibration firm, and twelve (12) years of work experience operating, maintaining, troubleshooting, repairing and calibrating electronic precision measurement equipment and calibration laboratory reference standards.</p><p>Five (5) years of experience in technical oversight and training responsibilities of calibration and repair technicians with three (3) years within the last five (5)</p><p>Experience in researching requirements and maintaining calibration laboratory facility and related environmental control systems.</p><p>Must have an Active US Government Secret Clearance.</p><p>NOTE: US Citizenship is required to obtain a Secret Clearance.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Aviation Life Support Equipment (ALSE) Technician serves as focal point for all logistics and repair functions for all supplied ALSE, first aid kits and Night Vision Devices. Principal Accountabilities Inspects and approves completed maintenance actions, solves repair problems by studying drawings, wiring diagrams and schematics, and technical publications. Inspects, instructs, services and certifies individual and crew equipment Order, receive and inventory kits and components Resolve shipping discrepancies Ensure proper fit of crew member clothing Maintain ALSE and NVD for DoS and DI personnel Maintain computerized inventories and records to ensure timely and accurate compliance with inspection intervals Provides instruction to contractor and host nation personnel regarding the proper use and care of equipment Perform other duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High School diploma or equivalent is required.</li><li>One (1) year verifiable experience as an ALSE technician.</li><li>Must possess a certificate of training as a school trained ALSE Technician.</li><li>Valid US Passport (minimum 2.5 years validity) Required for deployment to Germany.</li><li>Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust.</li><li>** US Citizenship is required to obtain a T1/CAC NACI Clearance.</li><li>Must meet and be able to pass CENTCOM Medical requirements, prior to deployment.</li><li>Ability to obtain a favorable background check for Kuwait PCC and obtain a Kuwait Visa.</li></ul><p>Knowledge &amp; Skills</p><ul><li>CMF 92 Supply &amp; Services MOS series or other military/commercial equivalent (92R MOS preferred)</li><li>Must have working knowledge of aircrew and aircraft LSE requirements for extreme environmental and high risk areas of operation</li><li>Must be able to ascertain LSE requirements for a multi-type aircraft environment</li><li>Must have knowledge of basic theory of flight and aircraft systems nomenclatures</li><li>Must have knowledge of flight line/ramp safety procedures and aircraft fire-fighting procedures</li><li>Must have knowledge of aviation maintenance data systems and associated documentation/forms</li><li>Must have knowledge of life support equipment maintenance tools and tool control procedures</li><li>Must knowledgeable of principles of instruction</li><li>Must have knowledge of seat kit survival components</li><li>Must have knowledge of aircrew life raft and life preserver inspections/maintenance</li><li>The ability to obtain and maintain a Moderate Risk Public Trust (MRPT) through Department of State Background Investigation is a condition of continued employment</li><li>Must possess or have the ability to obtain a U.S. Passport before assignment, this includes renewal and additional pages if applicable.</li></ul><p>Physical Requirements/Working Environment</p><ul><li>Must be able to walk and stand on level and/or inclined surfaces for up to six hours per day and sit for up to two hours per day</li><li>Must be able to climb stairs, ramps, and ladders and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to carry, push or pull up to 50 pounds</li><li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet</li><li>Must be able to communicate by voice and detect sounds</li><li>Must be able to distinguish color and judge three dimensional depths</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc</li><li>Must have minimum 20/100 near and far vision, correctable to 20/20. Also must be able to focus night vision devices (NVD) at a distance of at least 20 feet</li><li>Be able to travel to and between remote location(s)</li><li>Travel to austere or inhospitable high stress environments may be required</li><li>Ability to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure may be required</li><li>May be exposed to extreme noise from turbine and jet engine aircraft</li><li>May be exposed to fumes or airborne particles</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, and aircraft</li><li>Will be exposed to surface obstructions (ladders, stairs, etc)</li><li>May be exposed to chemical, mist, gas, vapors, ultra-violet and infra-red radiation.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Production Optimization Engineer is responsible for assisting in delivery of safe, efficient, and reliable products and services to our customers. The job consults with operations groups as needed to support the area of expertise and identifies opportunities for continuous improvement of product and service delivery and formally communicates findings. The Production Optimization Engineer actively participates in promoting new technology and services offerings and supports the PL in risk management and applying lessons learned to improve job design and execution as related to the area of expertise. They provide real-time support to operations as required. Provide technical support in the area of expertise throughout the Sales and Product and Service Delivery process. Assist as required with the development of technical job designs for PLs. Assist with identifying areas where new and cost effective techniques can be applied. Explore opportunities for value-added products and services. Consult with Design/Technical Engineer role as required to optimize the technical design. Assist in real-time incident response, recovery, and investigation as related to the area of expertise. Assist in evaluating technical viability and overall appraisal of tenders as related to the area of expertise. Remain current on new technologies. Maintain customer visibility through active participation in professional society activities and calls for papers. Understand the competition s technical offering. Participate in external technical societies and communities. Contribute, write and review technical publications. Engage with local universities, Customer institutes and research organizations.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><br></p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking Rig Electricians for deep drilling onshore rigs for our client in Kuwait. Key Responsibilities: Install new electrical equipment and systems as required, ensuring that installations are done in accordance with technical specifications and safety regulations. Run electrical wiring and conduit, install circuit breakers, panels, and other electrical infrastructure as needed. Test new installations to ensure proper operation and safety. Perform electrical maintenance and repairs on various equipment and systems. Conduct regular inspections to identify potential issues and develop preventative maintenance plans. Troubleshoot electrical problems and implement effective solutions. Collaborate with other departments to ensure electrical systems are integrated seamlessly. Maintain accurate records of electrical work and inspections. Comply with safety regulations and promote a culture of safety among the team. Respond to electrical emergencies, such as power outages or equipment failures, and take appropriate action to restore power and ensure safety. Participate in emergency drills and ensure readiness to address electrical issues in emergency situations. Stay up-to-date with industry trends and technological advancements. Maintain an adequate supply of parts for emergency repairs. Monitor the operational performance of the Company's equipment. Identify areas for improvement.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent and additional relevant electrical certifications or licenses.</li><li>Experience of 3+years as an Electrician in deep drilling land rigs is required.</li><li>Candidates from Canada, United States, Europe, Eastern Europe, Australia, China are preferred.</li><li>Strong knowledge of electrical systems, wiring, and equipment used in industrial or oil and gas settings.</li><li>Proficiency in diagnosing and repairing electrical issues.</li><li>Ability to read and interpret electrical schematics and diagrams.</li><li>Knowledge of safety regulations and best practices.</li><li>Ability to work in a fast-paced environment and handle multiple tasks.</li><li>Strong communication and interpersonal skills.</li><li>Willingness to work in various weather conditions and environments.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Conducts VTC conferences, operates VTC equipment such as VTC conferencing equipment, consoles, Digital Video Recorders (DVD), cameras, microphones, desktop and laptop computers supporting VTC events. Reports to the Site Manager as required. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position. Responsibilities Coordinates with customer to endure equipment is operational. Sets-up and operates VTC equipment. Establishes end to end secure and non-secure connectivity to support conferences. Establishes proper cable connection and routing to various Audio/Video and communication links. Adjusts sound and light levels for optimum performance of equipment and comfort of customers. Troubleshoots VTC and connectivity problems with local and distant end technical control facilities and help-desks to restore communication and resolve poor reception/transmission issues. Troubleshoots equipment; configures modems and data timing and transfer rates. Resolves connectivity problems with technical personnel. Performs weekly maintenance on all associated VTC equipment. Operates, administers, and maintains the VTC Bridge. Required to manipulate the bridge to provide technical support for all VTC circuits attached. Performs other duties and assignments as required.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Security Clearance: Requires an active Secret Clearance</p><p>Education/Certifications: One year related experience may be substituted for one year of education, if degree is required. High School diploma or GED required.</p><p>Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience. Requires a minimum of 5 years experience in Video Teleconferencing or Audio Video Productions. Must be able to work rotating shift schedules which provide 24 hour day/7 day week coverage. Experience with a customer service-oriented company.</p><p></p></section>

<p><h4>Job Description</h4> <p>The C-12/King Air Army Transport Aircraft Mechanic (FAA A&P) services, repairs, and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components.</p> <p><strong>Requirements:</strong></p> <ul> <li>A valid FAA A&P Airframe and Powerplant Certificate is required.</li> <li>Seven (7) years’ experience as an A&P mechanic with seven (7) years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</li> <li>US citizenship is required to obtain a US government Secret Security Clearance and for facility access.</li> </ul> <p><strong>Responsibilities:</strong></p> <ul> <li>Operationally check repaired or modified systems for proper operation.</li> <li>Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment.</li> <li>Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</li> <li>Examine engines for oil leaks and listen to operating engine to detect and diagnose malfunctions.</li> <li>Inspect turbine blades to detect cracks or breaks.</li> <li>Test engine operation using troubleshooting procedures and diagnostic test equipment to identify source of malfunction.</li> <li>Replace or repair worn or damaged components using hand tools, gauges, and test equipment.</li> <li>Remove and install engine from aircraft.</li> <li>Disassemble and inspect parts for wear, warping, or other defects.</li> <li>Repair or replace defective engine parts and reassemble and install engine in aircraft.</li> <li>Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.</li> <li>May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition.</li> <li>Maintain knowledge of aircraft sub-systems, including maintenance parameters, systems operation, limitations, and technical orders.</li> <li>Ability to become qualified and perform engine runs for the aircraft type assigned to support.</li> <li>Ability to read, write, and interpret technical duties is required.</li> <li>Ability to communicate effectively with all levels of employees throughout the organization.</li> <li>May specialize in work, repair, and modification of structural, precision, and functional spare parts and assemblies.</li> <li>Perform other qualified duties as assigned.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>High school diploma or GED equivalent is required.</li> <li>A valid FAA A&P Certificate is required.</li> <li>Seven (7) years’ experience as an A&P mechanic with seven (7) years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</li> <li>Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate US government armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</li> <li>Recent full-time experience in aviation maintenance on the C-12/King Air turbo-prop aircraft during the past 12 months is required.</li> <li>Six (6) months of flight line and overhaul and inspection experience is preferred.</li> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specifications for weight limit.</li> <li>Mechanic tools/toolbox required; mechanics must provide their own shadowed toolbox with each tool etched with PID.</li> <li>A valid US passport is required for deployment/travel; passport must have a minimum of 18 months remaining before expiration date and must be able to obtain required visas.</li> <li>Must be able to pass and clear CENTCOM (CRC) deployment training and Army MOD17 medical for deployment.</li> <li>May be required to travel to and between remote locations in austere and/or hostile environments in support of mission operations.</li> </ul> <h4>Medical and Security Clearance Requirements</h4> <ul> <li>All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed five (5) years.</li> <li>Must be able to obtain and maintain a US government Secret Security Clearance.</li> <li>Must be able to obtain and maintain facility credentials and authorization.</li> <li>US citizenship is required to hold a US government Secret Clearance and facility credentials and authorization to work at this facility.</li> </ul> <h4>Physical and Additional Qualifications</h4> <ul> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specifications for weight limit.</li> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.</li> <li>May be required to carry, push, or pull up to and may exceed 50 pounds.</li> <li>May be required to lift up to 50 pounds to a height of four feet and be required to lift up to 35 pounds to a height of seven feet.</li> <li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li> <li>Must be able to type using a standard keyboard to communicate through email and various software applications.</li> <li>Must be able to distinguish color and judge three-dimensional depths.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li> <li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li> <li>Must be capable of living and working in a potentially hostile environment for an extended period.</li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> </ul></p><p></p>