Industrial Safety Jobs in Kuwait

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Job Title: Safety Officer (Filipino)</b></p><p><b>Industry:</b> Heavy Equipment Company</p><p><b>Location:</b> Kuwait</p><p><b>Job Responsibilities:</b></p><ul><li>Ensure compliance with HSE policies and safety regulations.</li><li>Conduct site inspections, risk assessments, and safety audits.</li><li>Monitor safe operation of heavy equipment and work activities.</li><li>Investigate incidents and recommend corrective actions.</li><li>Conduct safety inductions, toolbox talks, and employee training.</li><li>Maintain HSE records and prepare safety reports.</li></ul><p><b>Requirements:</b></p><ul><li>Filipino nationality.</li><li><b>NEBOSH Certified</b> (mandatory).</li><li>2–5 years of experience as a Safety Officer, preferably in the heavy equipment, construction, or industrial sector.</li><li>Good knowledge of occupational health and safety standards.</li><li>Strong communication and reporting skills.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>NEBOSH </p><p>Nationality: Filipino Male</p><p><br></p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Candidates must have relevant experience in Substation and/or Overhead Transmission Line projects, either in India or internationally.</p></li><li><p>Develop and implement comprehensive safety programs tailored to Indian regulatory standards and workplace environments.</p></li><li><p>Conduct thorough hazard identification and risk assessments (HIRA) for all operational activities, focusing on potential Indian workplace hazards.</p></li><li><p>Investigate all accidents, near misses, and unsafe conditions, determining root causes and implementing corrective and preventive actions.</p></li><li><p>Ensure compliance with all relevant Indian safety legislation, including the Factories Act, and other applicable regulations.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Engineering (Mechanical, Chemical, Civil, Electrical) or equivalent.</p></li><li><p>The engineering college and the relevant discipline must be accredited by the National Board of Accreditation (NBA).</p></li><li><p>Possession of a relevant professional safety certification (e.g., NEBOSH IGC, IOSH, or Indian equivalent).</p></li><li><p>Minimum of 5 years of progressive experience in safety engineering within the Indian industrial sector.</p></li><li><p>Proven experience in implementing and managing OHSAS 18001/ISO 45001 management systems.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Security Coordinator supports the daily security operations of the University, ensuring a safe and secure environment for students, staff, visitors, and property. Under the direction of the Director of Security, this role oversees campus safety procedures, coordinates incident response, and upholds compliance with institutional security policies and protocols.</p><p>Key Responsibilities</p><ul><li>Monitor and support day-to-day campus security operations in accordance with established protocols.</li><li>Maintain student and campus safety in alignment with the University s code of conduct and security guidelines.</li><li>Implement and update campus security procedures, systems, and emergency response plans.</li><li>Assist with supervision of all entry and exit procedures for students, staff, visitors, and vendors.</li><li>Oversee vehicle and parking safety on campus, ensuring proper access control.</li><li>Prepare and issue reports, security communications, and incident summaries for management review.</li><li>Support recruitment, training, and scheduling of security personnel.</li><li>Coordinate with relevant departments on safety initiatives, emergency drills, and special event security needs.</li><li>Provide support for departmental projects and initiatives to enhance campus security infrastructure.</li><li>Perform additional duties as assigned by the Director of Security.</li></ul><p>Required Skills and Qualifications</p><ul><li>Strong communication skills in English, with the ability to engage effectively at all organizational levels.</li><li>Demonstrated knowledge of security practices; experience in campus or institutional security preferred.</li><li>Ability to work in a fast-paced environment, manage pressure, and exercise sound judgment.</li><li>Strong attention to detail, confidentiality, and professional discretion.</li><li>Proficiency in Microsoft Office applications (Word, Excel, etc.).</li><li>Ability to organize, prioritize, and meet operational deadlines.</li><li>Capacity to work collaboratively with diverse teams and stakeholders.</li><li>Willingness to work evenings, weekends, or emergencies as required.</li></ul><p>Education and Experience</p><ul><li>Bachelor s degree preferred.</li><li>Minimum three (3) years of experience in security, military, law enforcement, or related field.</li><li>Experience preparing reports and using basic computer applications.</li></ul><p>How to Apply</p><p>Interested candidates should visit the Job Opportunities section on the AIU website submit a resume and cover letter. Applications are reviewed on a rolling basis until the position is filled. The University reserves the right to close the search at any time. Only shortlisted candidates will be contacted. Submit application via: https://aiu.edu.kw/careers/jobs</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Strong communication skills in English, with the ability to engage effectively at all organizational levels.</li><li>Demonstrated knowledge of security practices; experience in campus or institutional security preferred.</li><li>Ability to work in a fast-paced environment, manage pressure, and exercise sound judgment.</li><li>Strong attention to detail, confidentiality, and professional discretion.</li><li>Proficiency in Microsoft Office applications (Word, Excel, etc.).</li><li>Ability to organize, prioritize, and meet operational deadlines.</li><li>Capacity to work collaboratively with diverse teams and stakeholders.</li><li>Willingness to work evenings, weekends, or emergencies as required.</li><li>Bachelor s degree preferred.</li><li>Minimum three (3) years of experience in security, military, law enforcement, or related field.</li><li>Experience preparing reports and using basic computer applications.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">Ensure the health, safety, and environmental (HSE) compliance of maritime &amp; cargo operations. Oversee everything from heavy crane operations &amp; hazardous material handling. Inspect marine vessels, port jetties heavy lifting gear to ensure SWL limits<br> <br> <p> <b>Required Candidate profile</b> </p>Functional safety, hazard identification (HAZID)&amp; knowledge of port yard &amp; stevedoring operations. B.E (Mechanical, Marine, or Industrial) combined with specialized HSE or fire safety qualifications</div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Kuwait Technical College Overview Kuwait Technical College (ktech), which has been operational since 2014 and located in, Ahmadi, Kuwait is a private higher education institution that focuses on bridging academic knowledge with practical, career-ready skills. It offers diploma and bachelor programs through two schools: the School of Business Management and the School of Information Systems and Technology, addressing Kuwait s growing demand for expertise in digital and economic fields. The School of Information Systems and Technology specializes in Cybersecurity, providing both diploma and bachelor s programs with a strong emphasis on hands-on skills and applied knowledge. The School of Business Management provides both diploma and bachelor s programs in Accounting, Marketing and Management of Information Systems. Kuwait Technical College is a proud affiliate of Eastern Michigan University.</p><p>Position Summary ktech invites applications for the position of Professor in Cybersecurity . The appointment will be based strictly on academic merit, research productivity, verified teaching experience, and compliance with institutional and accreditation requirements.</p><p>Duties and Academic Responsibilities</p><p>The appointed faculty member shall:</p><ul><li>Teach undergraduate and/or graduate courses in accordance with approved curricula.</li><li>Supervise student research projects and academic activities.</li><li>Provide professional mentorship to students.</li><li>Develop and maintain an independent research agenda with measurable scholarly output.</li><li>Publish in internationally recognized peer-reviewed journals indexed in reputable databases.</li><li>Participate in academic committees and institutional governance.</li><li>Contribute to curriculum development and program review processes.</li><li>Support accreditation, quality assurance, and institutional effectiveness initiatives.</li></ul><p>Eligibility and Academic Qualifications</p><p><b>Educational Requirements</b></p><ul><li>A PhD degree in Computer Science/Computer Engineering/Cybersecurity</li><li>The bachelor s/Master s degree may be in IT or a closely related field.</li><li>All degrees must be awarded by accredited universities and obtained through traditional, on-campus study formats.</li></ul><p>Academic Rank and Experience Requirements</p><ul><li>Minimum of 8 years of experience in a reputable academic institution and must have held the academic rank of Associate Professor for 4 years and the academic rank of Assistant Professor for 4 years.</li></ul><p>Research and Scholarly Requirements</p><ul><li>Minimum 13 full-length, high-quality academic papers published in reputable international peer-reviewed journals. Publications must meet recognized academic standards</li><li>A Scopus h-index of 20 or higher is preferred.</li><li>At least three (3) publications within the last five years.</li><li>The applicant must be first author on a minimum of seven (7) publications.</li><li>Research extracted directly from the applicant s MSc or PhD thesis will not be counted.</li></ul><p>Required Official Documentation</p><p>Applicants must submit the following:</p><ul><li>Detailed Curriculum Vitae (including academic rank history).</li><li>Official Experience Certificates verifying academic appointments.</li><li>Official Promotion Letters confirm academic rank advancement.</li><li>Teaching Evaluation Reports issued by the employing academic institution.</li><li>Copies of all academic degrees and official transcripts.</li><li>Research and Teaching Statements.</li><li>Copy of passport and recent photograph.</li></ul><p>Applicants must provide a valid contact number (including international country code) and an active email address for official correspondence. All submitted documents are subject to formal verification and authentication in accordance with institutional and regulatory requirements.</p><p>Why the State of Kuwait</p><p>Kuwait offers a unique blend of tradition, modernity, and opportunity that makes it an attractive destination for professionals and families alike. The country is known for its diverse culture, creating a vibrant environment for residents and visitors. Safety is another defining feature, Kuwait is considered a stable nation, providing a secure setting for work and daily life. Residents of Kuwait benefit from tax-free income, allowing them to maximize their earnings and enjoy a higher standard of living. Together, these qualities make Kuwait an exceptional place to live, work, and thrive.</p><p>Compensation and Benefits</p><p>The position offers a comprehensive benefits package designed to support both professional success and personal well-being:</p><ul><li>Competitive, all-inclusive tax-free salary (Annual range (based on experience and qualifications) of USD 95,000 to USD 130,000)</li><li>Annual ticket allowance to facilitate travel and maintain connections with the home country as per the candidate s official passport</li><li>Comprehensive health insurance coverage for the employee and eligible dependents</li></ul><p>Application Process</p><p>Applications will be reviewed in accordance with institutional policies and accreditation standards. The recruitment process will include the following stages:</p><ul><li>Pre-Screening: All applications will undergo an initial pre-screening to verify compliance with the stated academic, research, and documentation requirements.</li><li>Online Interview (Microsoft Teams): Shortlisted candidates will attend an initial interview conducted via Microsoft Teams.</li><li>Teaching Demonstration: Candidates may be required to deliver a demo lecture either online or during the campus visit. The specified subject will be shared after the first interview.</li><li>Final selection will be based on academic qualifications, research profile, interview performance, and teaching demonstration.</li></ul><p>For inquiries, please contact:</p><p>HR Department</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>A PhD degree in Computer Science/Computer Engineering/Cybersecurity</li><li>The bachelor s/Master s degree may be in IT or a closely related field.</li><li>All degrees must be awarded by accredited universities and obtained through traditional, on-campus study formats.</li><li>Minimum of 8 years of experience in a reputable academic institution and must have held the academic rank of Associate Professor for 4 years and the academic rank of Assistant Professor for 4 years.</li><li>Minimum 13 full-length, high-quality academic papers published in reputable international peer-reviewed journals. Publications must meet recognized academic standards</li><li>A Scopus h-index of 20 or higher is preferred.</li><li>At least three (3) publications within the last five years.</li><li>The applicant must be first author on a minimum of seven (7) publications.</li><li>Research extracted directly from the applicant s MSc or PhD thesis will not be counted.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Environmental Health &amp; Safety Specialist</b></p><br><br><p><b>Are you looking for an interesting and inspiring opportunity?</b></p><br><p><b>Would you like to be part of a successful company?</b><br><b>Join our HSE</b> <b>Team!</b></p><br><p><b>Partner with the best</b><br>&nbsp;</p><br><p>As an HSE Lead, you will be responsible for</p><br><ul><li><p><span>Engaging with business unit leadership team, to drive a sense of shared accountability and continuous improvement in HSE performance and culture, and integrate HSE in business decisions and management systems</span></p><br></li><li><p><span>Driving a compelling sense of urgency across the different product lines to&nbsp;identify&nbsp;HSE hazards, develop and implement effective safety critical barriers, and&nbsp;validate&nbsp;them </span></p><br></li><li><p><span>Driving the same compelling sense of urgency across the different product lines to&nbsp;identify&nbsp;applicable HSE regulatory requirements and&nbsp;take actions to ensure&nbsp;compliance</span></p><br></li><li><p><span>Engaging and cooperating with the broader Baker Hughes HSE function to deploy HSE practices and standards and accelerate performance improvements</span></p><br></li><li><p><span>Taking an active and effective stance in&nbsp;representing&nbsp;the company in external industry or community events</span></p><br></li></ul><p><br><b>Fuel your passion</b><br>&nbsp;</p><br><p>To be successful in this role you will:</p><br><ul><li><p><span>Have a&nbsp;Bachelor's&nbsp;degree from an accredited university in HSE or Engineering</span></p><br></li><li><p><span>Have a minimum of 5&nbsp;years&nbsp;of professional experience in an HSE role, preferably in&nbsp;Oil and Gas/ Energy&nbsp;industries&nbsp;or Manufacturing</span></p><br></li><li><p><span>Be knowledgeable about&nbsp;Kuwait Occupational Safety &amp; Health regulations and standards, and experienced in working with relevant regulatory agencies</span></p><br></li><li><p><span>Have skills in interfacing effectively with all levels of the organization, as well as outside Baker Hughes, including contractors, vendors, and customers</span></p><br></li><li><p><span>Being approved as HSE by KOC is a plus</span></p><br></li></ul><p><br><b>Work in a way that works for you</b><br>&nbsp;</p><br><p>We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns:<br>&nbsp;</p><br><ul><li><p>When assignments are complete, in general, you won't be required to visit the office, however, you can operate from Home and perform basic tasks like completing previous assignment reports, mobilization-related aspects, etc before you take on your next projects. The company shall ensure a work-life balance for the individual.</p><br></li></ul><p><br><b>Working with us</b><br>&nbsp;</p><br><p>Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.<br>&nbsp;</p><br><p><b>Working for you</b><br>&nbsp;</p><br><p>Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:<br>&nbsp;</p><br><ul><li><p>Contemporary work-life balance policies and well-being activities</p><br></li><li><p>Comprehensive private medical care options</p><br></li><li><p>The safety net of life insurance and disability programs</p><br></li><li><p>Tailored financial programs</p><br></li><li><p>Additional elected or voluntary benefits</p><br></li></ul><br>The Baker Hughes internal title for this role is: Environmental Health &amp; Safety Specialist - Health and Safety </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Long Description <br><br>Job Summary <br></span><p>The <span>Safety Engineer</span> is responsible for ensuring that health and safety protocols are consistently applied across Alghanim project sites and operational locations. This includes maintaining compliance with established standards and regulations, overseeing the implementation of safety measures, and promptly addressing and correcting any violations identified.</p><br><br><br>Job Responsibilities <br><ul> <li>Responsible to oversee the implementation of safety protocols on project sites and other workplaces by ensuring that safety standards and regulations are met and that any violations discovered are corrected.</li> <li>Liaising safety inspections involving ministry officers and coordinating corrective actions required</li> <li>Documentation of ministry related credentials , licenses attained certificates and other supporting documents</li> <li>Review policy arrangements and Identify areas for improvement where required.</li> <li>Carry out risk assessments and implement the controls identified within the assessment</li> <li>Monitor contractor compliance with our internal E.H&amp;S contractor management standards</li> <li>Investigate accidents, incidents &amp; Near misses and ensure that root cause is identified and that suitable controls are put in place to prevent a recurrence.</li> <li>Collate Accident, injury and near miss statistics and present them at the Monthly E.H&amp;S team meeting.&nbsp;</li> <li>Attend scheduled site meeting with the KFD to ensure fire licencing applications are on track.</li> <li>Provide E.H&amp;S advice to the business units on request.</li> <li>Plan to ensure that audit schedules are met</li> <li>Liaise with sites to plan annual fire drills and ensure that the fire drills are recorded and any learnings from the drill are implemented.</li> <li>Train staff in Fire awareness and first aid.</li> <li>Hold site monthly E.H&amp;S meetings and ensure that records and an action log of the meetings maintained</li> <li>Carry our safety audits and where deficiencies are identified work with the local management team to put in place corrective actions.</li> </ul><br><br>Candidate Requirements <br><ul> <li>Bachelor’s Degree in Engineering (any discipline)</li> <li>1-3 years of Experience&nbsp;</li> <li>NEBOSH, OSHA, IOSH preferred qualifications</li> <li>Experience in delivering training e.g. Fire safety &amp; First aid training</li> <li>Knowledge of MS Office (Excel, Word, PowerPoint)&nbsp;</li> <li>Good communication skills in English – Verbal &amp; Written (Arabic an advantage)</li> <li>Knowledge in safety procedures and standards</li> <li>Strong collaborator, fostering cooperation and modeling EHS practices</li> </ul><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a knowledgeable and proactive Piping Supervisor to join our dynamic team in the Project &amp; Construction Planning industry. This role is essential for ensuring that our piping systems are designed, installed, and maintained according to the highest standards of safety and efficiency. As a Piping Supervisor, you will play a pivotal role in overseeing piping projects, ensuring compliance with industry codes and standards, and fostering a culture of safety and excellence within your team.</p><p>In this position, you will have the opportunity to work closely with skilled professionals and gain hands-on experience in various piping projects. We value continuous learning and professional development, and you will have access to training programs designed to enhance your technical skills and leadership capabilities. Our team culture emphasizes collaboration and innovation, providing you with a supportive environment where your ideas and contributions are valued.</p><p>As you grow in this role, you will have the chance to take on more responsibilities and advance your career within our organization. We believe in recognizing and rewarding talent, and as you demonstrate your expertise in piping knowledge and safety standards, you will be well-positioned for future leadership opportunities. Join us and be part of a forward-thinking company that prioritizes employee growth and development.</p><p><b>Responsibilities:</b></p><ol><li>Supervise the installation and maintenance of piping systems, ensuring compliance with relevant codes and safety standards to guarantee operational efficiency and safety on-site.</li><li>Conduct regular inspections of piping installations, utilizing your expertise to identify potential issues and implement corrective actions to prevent safety hazards.</li><li>Collaborate with project managers and engineers to develop project plans, timelines, and resource allocations that align with project goals and deadlines.</li><li>Provide training and mentorship to junior staff and team members, fostering a culture of continuous improvement and knowledge sharing within the team.</li><li>Maintain accurate documentation of all piping activities, including inspections, maintenance, and compliance reports, to ensure traceability and accountability.</li><li>Coordinate with safety officers to conduct risk assessments and ensure that all safety protocols are followed during piping operations.</li><li>Monitor project budgets and resource utilization, making recommendations for cost-effective solutions that do not compromise safety or quality.</li><li>Engage with clients and stakeholders to communicate project progress, address concerns, and ensure satisfaction with piping services delivered.</li><li>Stay updated on industry trends, codes, and best practices in piping and safety to continuously enhance your knowledge and the team's performance.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Strong knowledge of piping codes and standards, ensuring compliance in all projects.</li><li>Expertise in safety protocols and risk management within the construction environment.</li><li>Excellent leadership and team management skills to guide diverse teams effectively.</li><li>Proficient in project management tools for planning and monitoring project progress.</li><li>Ability to conduct thorough inspections and assessments of piping systems.</li><li>Strong communication skills to liaise with clients, engineers, and team members.</li><li>Problem-solving skills to identify issues and implement effective solutions quickly.</li></ul></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Safety Engineer with 10 Years experience in Construction / infrastructure development projects. Preferably experience in Airport, Highway, Roads etc. Must be well knowledge of safety measures in Gulf.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Engineering graduate with minimum 10 Years experience in infrastructure development construction. Good communication skill. Site management, training.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Promotes and enforces the implementation of all QHSSE requirements and facilitates implementation and improvement of Barrier Management System (BMS) onboard the rig. Provides guidance and expertise to all personnel on Health, Safety, &amp; Environmental (HSE) standards and assists with related goals and programs. Ensures appropriate dissemination of HSE policies, procedures, and guidance documentation. Maintains a strong presence at the worksite, especially in high-risk, high-activity areas (i.e., deck, drill floor). Approximately 75% of the working day should be spent at the worksite, If this is not being met due to other administrative work loads then it must be raised first to STP then to Rig Manager and the office based QHSSE Focal Point assigned to the rig if not achieved in 1 hitch. Promotes Safety Programs (i.e., ADES 8 keys to incident-free) on the rig, ensuring each employee is aware of their standards and how to apply them. Promotes ADES Awards (i.e., TOFS award) to embed the concept into the rig culture. Assists in the management of the Stop, Hazard, Initiate, Engage, Learn and Demonstrate (SHIELD) program and encourage active participation by undertaking safety performance conversations by all persons on board. Ensures Stop Work Authority (SWA) obligation is understood by all persons on board and exercised promptly. This is integral to the Company s safety culture. The RSO is expected to lead by example and should coach all crew members by helping them intervene and stop work when opportunities arise. Assists the Senior Tool Pusher by monitoring/verifying compliance with control of work systems such as JSA, SOP s, PTW, Isolation, Confined Space, Rescue Planning etc. Complies with, monitor, and effectively contribute to the continuous improvement of BMS, HSE related policies and procedures, and relevant authority regulatory requirements. Identifies and addresses in collaboration with the site operations management by identifying and addressing HSE or noncompliance concerns. Assists with internal/external audit completion, close-out, and tracking. Consults with personnel including safety leaders and department heads on all matters concerning safety. Engages with crews during safety meetings and supervisors meetings; presents topics/findings. Monitors the selection of suitable personal protective equipment (PPE) including performing checks on sizing and suitability. Maintains awareness of substances hazardous to health and the correct storage, use, handling, and PPE requirements. Carries out onboard training and/or books crew training to ensure full compliance with the crew training matrix. Assist third-party trainers as necessary. Assists, monitors, and verifies compliance with the short-service employee (SSE) process to ensure effective implementation and that on-the-job training is being provided to develop the SSEs. Participate and assist the Senior Tool Pusher with rig-based incident reporting and investigations to determine root cause(s). Ensure investigation findings are shared between all crews on board. Assist with and deliver rig orientation and induction (as requested). Liaise with customer representatives and regulatory bodies as necessary. Perform emergency duties as per the rig station bill. Moderates the rig self-verification process.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Education &amp; Experience:</h2><ul><li>Bachelor's degree</li><li>Preferably a minimum of 2 years in an RSO role.</li><li>Previous experience within the drilling industry in an HSE role/position.</li></ul><h2>Skills/Competencies Required:</h2><ul><li>Completion of all required ADES mandatory training requirements.</li><li>Working knowledge of Microsoft Office products (Excel, Word, PowerPoint, etc.).</li><li>Excellent written and verbal communication skills.</li><li>Detail-oriented.</li><li>Analytical thinking and solution Decision-making.</li><li>Performance Management, planning, problem-solving, organizational, and time management skills.</li><li>Inspire Trust.</li></ul><h2>Certifications:</h2><ul><li>As per ADES Training Matrix.</li><li>Formal investigation training certification preferred (i.e., Taproot , Topset or equivalent).</li><li>Recognized HSE training qualification preferred (i.e., NEBOSH, IOSH, OSHA or equivalent).</li><li>Additional QHSSE audit certifications'</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> <strong> <u>Job Summary:</u> </strong> </p> <p>Promotes and enforces the implementation of all QHSSE requirements and facilitates implementation and improvement of Barrier Management System (BMS) onboard the rig. Provides guidance and expertise to all personnel on Health, Safety, &amp; Environmental (HSE) standards and assists with related goals and programs.</p> <p> <strong> <u>Roles &amp; Responsibilities:</u> </strong> </p> <ul> <li>Ensures appropriate dissemination of HSE policies, procedures, and guidance documentation.</li> <li>Maintains a strong presence at the worksite, especially in high-risk, high-activity areas (i.e., deck, drill floor). Approximately 75% of the working day should be spent at the worksite, If this is not being met due to other administrative work loads then it must be raised first to STP then to Rig Manager and the office based QHSSE Focal Point assigned to the rig if not achieved in 1 hitch.</li> <li>Promotes Safety Programs (i.e., ADES 8 keys to incident-free) on the rig, ensuring each employee is aware of their standards and how to apply them.</li> <li>Promotes ADES Awards (i.e., TOFS award) to embed the concept into the rig culture.</li> <li>Assists in the management of the Stop, Hazard, Initiate, Engage, Learn and Demonstrate (SHIELD) program and encourage active participation by undertaking safety performance conversations by all persons on board.</li> <li>Ensures Stop Work Authority (SWA) obligation is understood by all persons on board and exercised promptly. This is integral to the Company s safety culture. The RSO is expected to lead by example and should coach all crew members by helping them intervene and stop work when opportunities arise.</li> <li>Assists the Senior Tool Pusher by monitoring/verifying compliance with control of work systems such as JSA, SOP s, PTW, Isolation, Confined Space, Rescue Planning etc.</li> <li>Complies with, monitor, and effectively contribute to the continuous improvement of BMS, HSE related policies and procedures, and relevant authority regulatory requirements.</li> <li>Identifies and addresses in collaboration with the site operations management by identifying and addressing HSE or noncompliance concerns.</li> <li>Assists with internal/external audit completion, close-out, and tracking.</li> <li>Consults with personnel including safety leaders and department heads on all matters concerning safety.</li> <li>Engages with crews during safety meetings and supervisors meetings; presents topics/findings.</li> <li>Monitors the selection of suitable personal protective equipment (PPE) including performing checks on sizing and suitability.</li> <li>Maintains awareness of substances hazardous to health and the correct storage, use, handling, and PPE requirements.</li> <li>Carries out onboard training and/or books crew training to ensure full compliance with the crew training matrix. Assist third-party trainers as necessary.</li> <li>Assists, monitors, and verifies compliance with the short-service employee (SSE) process to ensure effective implementation and that on-the-job training is being provided to develop the SSEs.</li> <li>Participate and assist the Senior Tool Pusher with rig-based incident reporting and investigations to determine root cause(s). Ensure investigation findings are shared between all crews on board.</li> <li>Assist with and deliver rig orientation and induction (as requested).</li> <li>Liaise with customer representatives and regulatory bodies as necessary.</li> <li>Perform emergency duties as per the rig station bill.</li> <li>Moderates the rig self-verification process.</li> </ul> <p> <strong> <u>Job Requirements:</u> </strong> </p> <p> <strong>Education &amp; Experience:</strong> </p> <ul> <li>Bachelor s degree</li> <li>Preferably a minimum of 2 years in an RSO role.</li> <li>Previous experience within the drilling industry in an HSE role/position. </li> </ul> <p> <strong>Skills/Competencies Required:</strong> </p> <ul> <li>Completion of all required ADES mandatory training requirements. </li> <li>Working knowledge of Microsoft Office products (Excel, Word, PowerPoint, etc.). </li> <li>Excellent written and verbal communication skills. </li> <li>Detail-oriented. </li> <li>Analytical thinking and solution Decision-making. </li> <li>Performance Management, planning, problem-solving, organizational, and time management skills. </li> <li>Inspire Trust.</li> </ul> <p> <strong>Certifications:</strong> </p> <ul> <li>As per ADES Training Matrix.</li> <li>Formal investigation training certification preferred (i.e., Taproot , Topset or equivalent). </li> <li>Recognized HSE training qualification preferred (i.e., NEBOSH, IOSH, OSHA or equivalent). </li> <li>Additional QHSSE audit certifications </li> </ul> <div><br></div></div></section>

<p>An auto mechanic technician inspects, maintains, and repairs cars, trucks, and other vehicles.</p><p>Their core duties involve using computerized diagnostic tools to find mechanical or electrical problems, performing routine tune-ups or oil changes, and replacing worn-out or broken parts to keep vehicles safe and efficient on the road.</p><p>&nbsp;</p><p><strong>Job Summary</strong></p><p>An automotive service technician ensures vehicle safety and performance by identifying malfunctions, executing precise repairs, and communicating repair needs clearly to customers or service advisors</p><p>&nbsp;</p><p><strong>Key Responsibilities</strong></p><p>• Diagnostics: Use electronic scanners and diagnostic equipment to read error codes and pinpoint engine, transmission, or electrical issues.</p><p>• Routine Maintenance: Change motor oil, rotate tires, check fluid levels, replace brake pads, and service batteries.</p><p>• Repairs &amp; Replacements: Fix or swap out defective parts like alternators, sensors, belts, and suspension components.</p><p>• Testing: Test drive vehicles or use specialized shop equipment to verify that systems operate properly after service.</p><p>• Documentation: Record all completed services, parts utilized, and labor hours accurately<br>&nbsp;</p><p ><span lang="ar" dir="rtl">يتولى <strong>فني ميكانيكا السيارات</strong> مهام فحص وصيانة وإصلاح السيارات والشاحنات والمركبات الأخرى.</span></p><p ><span lang="ar" dir="rtl">وتتمثل مهامه الأساسية في استخدام أدوات التشخيص المحوسبة للكشف عن الأعطال الميكانيكية أو الكهربائية، وإجراء عمليات الضبط الدوري أو تغيير الزيت، واستبدال الأجزاء التالفة أو المكسورة لضمان سلامة المركبات وكفاءة أدائها على الطريق.</span></p><h3 ><span lang="ar" dir="rtl">مهام الوظيفة</span></h3><p ><span lang="ar" dir="rtl">يعمل <strong>فني خدمة السيارات</strong> على ضمان سلامة المركبات وكفاءة أدائها من خلال تحديد الأعطال، وإجراء الإصلاحات الدقيقة، وتوضيح احتياجات الإصلاح للعملاء أو مستشاري الخدمة.</span></p><h3 ><span lang="ar" dir="rtl">المسؤوليات الرئيسية</span></h3><ul><li><p ><span lang="ar" dir="rtl"><strong>التشخيص:</strong> استخدام أجهزة المسح الإلكتروني ومعدات التشخيص لقراءة رموز الخطأ وتحديد المشكلات المتعلقة بالمحرك أو ناقل الحركة أو الأنظمة الكهربائية بدقة.</span></p></li><li><p ><span lang="ar" dir="rtl"><strong>الصيانة الدورية:</strong> تغيير زيت المحرك، وتبديل أماكن الإطارات (تدويرها)، وفحص مستويات السوائل، واستبدال وسادات المكابح، وصيانة البطاريات.</span></p></li><li><p ><span lang="ar" dir="rtl"><strong>الإصلاح والاستبدال:</strong> إصلاح أو استبدال الأجزاء المعطلة مثل المولدات (الدينامو)، والمستشعرات، والأحزمة، ومكونات نظام التعليق.</span></p></li><li><p ><span lang="ar" dir="rtl"><strong>الاختبار:</strong> قيادة المركبات تجريبياً أو استخدام معدات الورشة المتخصصة للتحقق من عمل الأنظمة بشكل سليم بعد إجراء الخدمة.</span></p></li><li><p ><span lang="ar" dir="rtl"><strong>التوثيق:</strong> تسجيل كافة الخدمات المنجزة، وقطع الغيار المستخدمة، وساعات العمل بدقة.</span></p></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Electrician Oil &amp; Gas Shutdown</b></p><p><br></p><p>Certified industrial electricians for a 4-month shutdown project. H2S and safety certification mandatory. Attractive project completion bonus.</p><p><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><br></p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Job Summary</b></p><p>We are looking for a proactive and commercially driven <b>Business Development Senior Executive</b> for an exciting opportunity based in <b>Shuaiba, Kuwait</b>. The ideal candidate will have strong experience in B2B sales within the plastics manufacturing industry, preferably selling products to water companies and other industrial clients. This role is responsible for driving business growth, conducting market assessments, and leading product development initiatives from concept through commercialization, ensuring products meet customer requirements, market demands, and quality standards.</p><p><b>Key Responsibilities</b></p><ul><li>Identify and develop new business opportunities within the water industry and other industrial sectors requiring plastic products.</li><li>Build and maintain strong relationships with existing and prospective B2B clients.</li><li>Develop and execute sales strategies to achieve revenue and profitability targets.&nbsp;</li><li>Lead product development initiatives from market assessment and concept validation through realization and launch.</li><li>Conduct market research to identify customer needs, market trends, competitor activities, and new business opportunities.</li><li>Coordinate with Quality Assurance, Production, Engineering, and Operations teams to ensure product quality and successful product implementation.</li><li>Prepare commercial proposals, quotations, presentations, and negotiate contracts with clients.</li><li>Monitor customer satisfaction and provide timely solutions to enhance long-term partnerships.</li><li>Analyze sales performance, market data, and customer feedback to support business decisions.</li><li>Prepare regular reports on sales activities, pipeline status, market insights, and business development initiatives.</li><li>Represent the company at industry events, exhibitions, and client meetings.</li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Qualifications</b></p><ul><li>Bachelor's degree in Finance &amp; Accounting, Business Administration, Marketing, or a related field, MBA is an advantage.</li><li>3–5 years of experience in business development, B2B sales, or commercial roles.</li><li>Experience within the plastics manufacturing, packaging, industrial products, or related sectors is highly preferred.</li><li>Previous experience selling to water companies, utilities, or industrial clients is a strong advantage.</li><li>Proven track record of achieving sales targets and developing new business.</li></ul></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>The Electrical Maintenance Manager (For Land Drilling Rigs &amp; Associated Equipment’s and Work Shop) is responsible and In-Charge for planning, managing, and supervising all electrical maintenance activities related for all the land drilling rigs and associated equipment’s ,Organize the workshop / Electrical Yard, Manage PMS System, travelling equipment, and material handling systems operating under Kuwait Oil Company (KOC) standards. The role ensures maximum equipment reliability, operational efficiency, regulatory compliance, and adherence to HSE requirements while leading a multidisciplinary electrical maintenance team. Perform the following essential work activities to ensure safe, reliable, and efficient operation of electrical systems for drilling rigs, travelling equipment, and handling systems under Kuwait Oil Company (KOC) operations. Maintenance Planning and Execution Electrical Equipment Maintenance Travelling and Handling Equipment Support Fault Diagnosis and Technical Support Asset Reliability Management Team Leadership and Supervision Health, Safety, and Environmental Compliance Maintenance Planning and Resource Management Contractor and Vendor Coordination Documentation and Reporting Quality Assurance and Continuous Improvement Operational Support Compliance and Governance </strong></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education Bachelor’s Degree in Electrical Engineering (Mandatory) Masters Degree or MBA (Preferred) Experience Minimum 20+ years of electrical maintenance experience in the oil &amp; gas or drilling industry. Minimum 15 years in a managerial or supervisory role. Experience with KOC or GCC drilling operations is preferred. Technical Skills Strong knowledge of drilling rig electrical systems, power generation, MCCs, VFDs, SCR systems, PLCs, transformers, motors, switchgear, and power distribution. Proficiency in preventive, predictive, and corrective maintenance. Experience with CMMS (SAP PM, Maximo, or equivalent) and Microsoft Office. Leadership &amp; Soft Skills Strong leadership, planning, problem-solving, communication, and team management skills. Ability to manage contractors, budgets, and maintenance resources effectively. HSE &amp; Certifications Good knowledge of KOC HSE requirements, PTW, LOTO, and electrical safety standards. NEBOSH, IOSH, CMRP, HV Switching, or equivalent certifications are preferred. </p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job Summary</p><p>The Body Shop Manager is responsible for overseeing all daily operations of the dealership's body shop, ensuring high-quality vehicle repairs, efficient workflow, customer satisfaction, profitability, and compliance with manufacturer (OEM) and insurance standards. The role leads the body shop team, manages operational performance, maintains quality standards, and drives continuous improvement while delivering exceptional customer service.</p><p>Key Responsibilities</p><ul><li>Manage the day-to-day operations of the body shop, including scheduling, workflow planning, and production control.</li><li>Supervise and lead body shop technicians, painters, estimators, and support staff to ensure efficient operations.</li><li>Ensure all collision repairs and bodywork comply with dealership, OEM, and insurance company standards.</li><li>Review and approve repair estimates, supplements, and final invoices before submission.</li><li>Coordinate with insurance adjusters, surveyors, vendors, and suppliers to facilitate timely approvals and parts availability.</li><li>Monitor repair cycle times, productivity, quality, and profitability to achieve departmental KPIs.</li><li>Ensure proper maintenance, calibration, and safe use of workshop tools, equipment, and paint systems.</li><li>Maintain a clean, organized, safe, and compliant working environment in accordance with health and safety regulations.</li><li>Handle customer concerns, complaints, and follow-ups to ensure high levels of customer satisfaction.</li><li>Control departmental costs, manage inventory, and minimize material waste and rework.</li><li>Ensure accurate documentation, repair records, billing, insurance paperwork, and compliance reporting.</li><li>Monitor key performance indicators (KPIs) and prepare operational reports for management review.</li><li>Recruit, train, mentor, and evaluate body shop staff while promoting employee development and performance improvement.</li><li>Collaborate with the Service, Parts, Sales, and Administration departments to ensure smooth operational coordination.</li><li>Implement continuous improvement initiatives to enhance productivity, repair quality, and customer experience.</li><li>Ensure compliance with company policies, environmental regulations, and manufacturer guidelines.</li></ul><p>Qualifications</p><ul><li>High School Diploma or equivalent; technical or vocational training in Automotive Technology is preferred.</li><li>Minimum 5 years of experience in automotive body shop or collision repair operations, with proven managerial or supervisory experience.</li><li>Strong knowledge of collision repair procedures, bodywork, painting processes, automotive parts, and insurance claim procedures.</li><li>Experience working with Dealer Management Systems (DMS).</li><li>Proficiency in Microsoft Office Suite (Word, Excel, Outlook, and PowerPoint).</li><li>Sound understanding of OEM repair standards and dealership operations.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Skills &amp; Competencies</p><ul><li>Strong leadership and people management skills.</li><li>Excellent planning, organizational, and operational management abilities.</li><li>Strong analytical, problem-solving, and decision-making skills.</li><li>Excellent communication and interpersonal skills.</li><li>Customer-focused with the ability to effectively handle complaints and service escalations.</li><li>Financial awareness with experience in cost control, budgeting, and inventory management.</li><li>Ability to prioritize multiple tasks and work effectively in a fast-paced dealership environment.</li><li>Strong attention to detail and commitment to quality, safety, and operational excellence.</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>About The Client</b></p><p>A leading engineering and contracting company in Kuwait, recognized for delivering innovative solutions across mechanical, electrical, and fire protection systems. With a strong presence in the Kuwait market, the group has built a reputation for excellence, compliance with local authorities, and long-term client partnerships. Guided by a commitment to quality and safety, the organization continues to drive growth through specialized projects and trusted expertise.</p><p><b>About The Role</b></p><p>This position will be responsible for the end-to-end management of a diversified property portfolio spanning Residential, Commercial, Industrial, and Private assets. This role ensures properties are well-maintained, compliant with statutory regulations, and operationally efficient, while managing budgets, vendor contracts, and tenant/owner relationships. The ideal candidate will bring a versatile, multi-sector approach to property management, ensuring consistent service quality and value across all asset types under their management and care.&nbsp;</p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>About You</b></p><p>The ideal candidate would have the following:&nbsp;</p><ul><li>Bachelor's degree in Facilities Management, Real Estate, Civil/Mechanical Engineering, Business Administration, or related field.</li><li>Minimum 8–10 years in property/facility management, with demonstrated exposure across multiple asset classes.</li><li>&nbsp;Proven experience managing a mix of Residential, Commercial, Industrial, Hospitality, and/or Private properties — not limited to a single sector</li><li>&nbsp;Strong background in negotiating, managing, and monitoring service contracts, SLAs, and vendor performance (MEP, security, cleaning, landscaping, etc.)</li><li>&nbsp;Experience preparing and managing operating budgets, service charges, and expenditure tracking</li><li>Familiarity with Kuwait municipal regulations, tenancy law, and fire/safety compliance standards</li><li>&nbsp;Fluent in English; Arabic is an advantage.</li><li>Strong stakeholder management, communication, and problem-solving skills; ability to work independently across a diverse portfolio</li><li>Must have a Kuwait valid driving license&nbsp;</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span>Security Coordinator</span></span><br><span><span>Classification:</span>&nbsp;Institutional Support</span><br><span><span>Reports To:</span>&nbsp;Director of Security</span><br></p><br> <p><span>About The American International University</span></p><br> <p><span>American International University (AIU) is a private institution in Kuwait, founded in 2019, offering undergraduate programs based on the American model of higher education. AIU provides degrees in Engineering, Architecture and Design, Business Administration, Arts and Sciences, and Education, with English as the language of instruction. The University is committed to fostering intellectual, cultural, and personal growth, preparing graduates for leadership roles in a global society.</span></p><br> <p><span>AIU is executing its RISE Strategy 2026–2030, a five-year institutional transformation encompassing research development, international institutional accreditation, student success, and community engagement. A central strategic objective is establishing AIU's presence in international university rankings and benchmarking its performance against regional and global peers. The Director of Global Excellence and Benchmarking leads this agenda.</span></p><br> <p><span>For more information, visit: www.aiu.edu.kw</span></p><br> <p><span><span>Job Purpose</span></span></p><br> <p><span>The Security Coordinator supports the daily security operations of the University, ensuring a safe and secure environment for students, staff, visitors, and property. Under the direction of the Director of Security, this role oversees campus safety procedures, coordinates incident response, and upholds compliance with institutional security policies and protocols.</span></p><br> <p><span><span>Key Responsibilities</span><br></span></p><br> <ul> <li><span>Monitor and support day-to-day campus security operations in accordance with established protocols.</span></li> <li><span>Maintain student and campus safety in alignment with the University’s code of conduct and security guidelines.</span></li> <li><span>Implement and update campus security procedures, systems, and emergency response plans.</span></li> <li><span>Assist with supervision of all entry and exit procedures for students, staff, visitors, and vendors.</span></li> <li><span>Oversee vehicle and parking safety on campus, ensuring proper access control.</span></li> <li><span>Prepare and issue reports, security communications, and incident summaries for management review.</span></li> <li><span>Support recruitment, training, and scheduling of security personnel.</span></li> <li><span>Coordinate with relevant departments on safety initiatives, emergency drills, and special event security needs.</span></li> <li><span>Provide support for departmental projects and initiatives to enhance campus security infrastructure.</span></li> <li><span>Perform additional duties as assigned by the Director of Security.</span></li> </ul> <p><span><span>Required Skills and Qualifications</span></span></p><br> <ul> <li><span>Strong communication skills in English, with the ability to engage effectively at all organizational levels.</span></li> <li><span>Demonstrated knowledge of security practices; experience in campus or institutional security preferred.</span></li> <li><span>Ability to work in a fast-paced environment, manage pressure, and exercise sound judgment.</span></li> <li><span>Strong attention to detail, confidentiality, and professional discretion.</span></li> <li><span>Proficiency in Microsoft Office applications (Word, Excel, etc.).</span></li> <li><span>Ability to organize, prioritize, and meet operational deadlines.</span></li> <li><span>Capacity to work collaboratively with diverse teams and stakeholders.</span></li> <li><span>Willingness to work evenings, weekends, or emergencies as required.</span></li> </ul> <p><span><span>Education and Experience</span></span></p><br> <ul> <li><span>Bachelor’s degree preferred.</span></li> <li><span>Minimum three (3) years of experience in security, military, law enforcement, or related field.</span></li> <li><span>Experience preparing reports and using basic computer applications.</span></li> </ul> <p><span><span>How to Apply</span></span></p><br> <p><span>Interested candidates should visit the Job Opportunities section on the AIU website <span>submit a resume and cover letter.</span><br></span></p><br> <p><span><span>Applications are reviewed on a rolling basis until the position is filled. The University reserves the right to close the search at any time. Only shortlisted candidates will be contacted.</span><br></span></p><br> <p><span>Submit application via: https://aiu.edu.kw/careers/jobs</span></p><br> <p><span>AIU is an equal opportunity employer committed to academic excellence, professional integrity, and the advancement of Kuwait as a regional center of knowledge and innovation.</span></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Job Purpose: </strong></p><br><p>To lead the implementation, configuration, and lifecycle support of the Security Management Information System (SMIS) at the airport, ensuring robust infrastructure, efficient integration with Honeywell and 3rd party systems.</p><br><br><span>Honeywell helps organizations solve the world's most complex challenges in automation, the future of aviation and energy transition. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments – powered by our Honeywell Forge software – that help make the world smarter, safer and more sustainable.</span><br>Responsibilities:<br><p><span><strong>Job Description:&nbsp;</strong></span></p><br><ul><li><span>Oversee end-to-end deployment of Genetec Security Center, including detailed configuration of Video (Omnicast) and IIoT module and Intelligent Video Analytics. Supervising the shop drawings and application projects of Security Systems Infrastructure (preferred)</span></li><li><span>Lead integration of Genetec with Honeywell and 3rd party systems. (preferred)</span></li><li><span>Perform advanced engineering calculations for system sizing, including server, storage, and network bandwidth requirements based on frame rate, resolution, retention, and redundancy.</span></li><li><span>Manage and maintain the POC/test environment, validating all solutions before production deployment.</span></li><li><span>Manage system virtualization using VMware vSphere, including deployment, snapshots, resource pools, and high-availability configurations.</span></li><li><span>Monitor HCI platforms (e.g., Dell VxRail or Nutanix) for performance, fault tolerance, and storage efficiency.</span></li><li><span>Provide daily updates and reporting to the Project Manager and collaborate closely with the Engineering Manager for design reviews, changes, and approvals.</span></li><li><span>Ensure proper documentation of configurations, topology diagrams, and system health reports.</span></li><li><span>Support testing &amp; commissioning activities and interface with stakeholders during inspections and FAT/SAT procedures.</span></li><li><span>Prepare graphics and necessary programming works as per Tender Requirement.</span></li><li><span>Be ready on the job site during temporary or final acceptance of Operational projects/ Quoted Reactive work.</span></li><li><span>Availability for and performance of duties outside of normal working hours as per agreed scheduled as directed by PM/EM</span></li><li><span>Ensure customer satisfaction through direct liaison with client representatives, customers and operational recipients.</span></li><li><span>Ensure delivery of value to Honeywell clients and customers.</span></li><li><span>Financial control per previously agreed budgets and plans.</span></li><li><span>Support PM/EM to minimize the Project Cost and Time.</span></li><li><span>Support PM/EM to prepare Progress and Cost Reports&nbsp;</span></li><li><span>Analyze backward completion of the projects with difficulties/mistakes met and make necessary suggestions for organization tuning accordingly.</span></li><li><span>Create new Variation opportunities during the Execution of the project.</span></li><li><span>Report possible future failures, disturbances and other opportunities for improvement</span></li><li><span>Estimate materials costs and quantities provide the information to the PM/EM, and Operational Sales.</span></li><li><span>Follow the Honeywell SOPs, HOS, HSE and Quality Systems while executing assigned projects</span></li><li><span>Carry out hazard and risk assessments for all tasks as per company policy and procedures.</span></li><li><span>Report near misses, incidents and other opportunities for improvement.</span></li></ul><p><span>Area of Experience:</span></p><br><ul><li><span>Large Scale Project Experience&nbsp;</span></li><li><span>Multi-National Project Experience</span></li><li><span>Airport Security System experience preferred</span></li><li><span>Honeywell and other 3rd Party Security Systems experience preferred</span></li></ul><br>Qualifications:<br><p><span><b>Qualifications &amp; Experience:</b></span></p><br><p><span><b>Must to have:</b></span></p><br><ul><li>Bachelor’s Degree in Electrical, Electronics, Computer, or IT Engineering.</li><li>Minimum 5- 8 years of relevant experience in airport-scale or critical infrastructure security systems.</li><li>Proven experience in system integration, video analytics, and smart surveillance</li></ul><p><span><b>Nice to have:</b></span></p><br><ul><li>Expert knowledge of Genetec Security Center or similar software&nbsp;</li><li>Strong experience with VMware vSphere, virtual networking, and storage (certification preferred).</li><li>Expert knowledge of IP networking, system infrastructure, failover.</li><li>Knowledge of aviation safety/security compliance standards.</li></ul><p><span><i><b>We are an equal opportunity employer and value diversity at our company. We do&nbsp;not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.</b></i></span></p><br><p><span><i><b>We will ensure that individuals with disabilities are provided reasonable accommodation to&nbsp;participate in the job application or interview process, to&nbsp;perform crucial job functions, and to&nbsp;receive other benefits and privileges of employment. Please contact us to&nbsp;request accommodation.</b></i></span></p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking Rig Electricians for deep drilling onshore rigs for our client in Kuwait. Key Responsibilities: Install new electrical equipment and systems as required, ensuring that installations are done in accordance with technical specifications and safety regulations. Run electrical wiring and conduit, install circuit breakers, panels, and other electrical infrastructure as needed. Test new installations to ensure proper operation and safety. Perform electrical maintenance and repairs on various equipment and systems. Conduct regular inspections to identify potential issues and develop preventative maintenance plans. Troubleshoot electrical problems and implement effective solutions. Collaborate with other departments to ensure electrical systems are integrated seamlessly. Maintain accurate records of electrical work and inspections. Comply with safety regulations and promote a culture of safety among the team. Respond to electrical emergencies, such as power outages or equipment failures, and take appropriate action to restore power and ensure safety. Participate in emergency drills and ensure readiness to address electrical issues in emergency situations. Stay up-to-date with industry trends and technological advancements. Maintain an adequate supply of parts for emergency repairs. Monitor the operational performance of the Company's equipment. Identify areas for improvement.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent and additional relevant electrical certifications or licenses.</li><li>Experience of 3+years as an Electrician in deep drilling land rigs is required.</li><li>Candidates from Canada, United States, Europe, Eastern Europe, Australia, China are preferred.</li><li>Strong knowledge of electrical systems, wiring, and equipment used in industrial or oil and gas settings.</li><li>Proficiency in diagnosing and repairing electrical issues.</li><li>Ability to read and interpret electrical schematics and diagrams.</li><li>Knowledge of safety regulations and best practices.</li><li>Ability to work in a fast-paced environment and handle multiple tasks.</li><li>Strong communication and interpersonal skills.</li><li>Willingness to work in various weather conditions and environments.</li></ul><p></p></section>