Industrial Engineer Jobs in Kuwait 2026

Full Time 3 to 5 years Tanqeeb.com

مهندس مدني

On-site - Kuwait - Al Farwaniyah 7 June 2026

مطلوب مهندس موقع خبرة لا تقل عن ثلاث سنوات داخل الكويت خبرة في ادارة الاعمال داخل المواقع الانشائيةمن الهيكل الاسود أو التشطيبات الخاصة بالقسائم السكنيةوالقدرة على التعامل مع العمال الفنيين والمقاولين داخل الموقع.بحاجة الى ان يكون المتقدم لديه معرفة بأنظمة الادارة الالكترونيةمتابعة المكتب الهندسي اثناء اعمال الانشاء.سيتم شرح الاعمال بشكل أكثر أثناء مقابلة العمل.الراتب يحدد بعد المقابلة

Full Time 3 to 10 years Tanqeeb.com

Civil Site Engineer

On-site - Kuwait - Al Farwaniyah 14 August 2026

Civil Site Engineer required to work in the State of Kuwait. Qualifications and requirements 1. Bachelor's degree in Civil Engineering.2. Practical experience in the execution of structural steel and finishes for at least 3 years.3. Provide experience certificates from previous employers.4. Ability to quantify quantities and prepare pricing and initial project costs.5. Proficiency in reading and analyzing structural and architectural drawings.6. Ability to manage the site and follow up with subcontractors and workers, coordinating between different execution items.7. Ability to monitor the schedule and progress rates and address delays on site.8. Good knowledge of quality requirements, handover of works, and ensuring compliance with drawings and specifications.9. Proficiency in AutoCAD, Microsoft Excel, and Word.10. Proficiency in MS Project or Primavera is an added advantage.11. Active membership in the Kuwait Engineers Association.12. Valid Kuwaiti driver's license.13. Owns a private car.14. Demonstrates commitment, discipline, and the ability to manage site responsibilities, troubleshoot, and make decisions. Job responsibilities - Daily supervision of project sites and monitoring progress.- Carrying out site inspections, taking measurements, and quantifying quantities.- Preparing and reviewing project pricing before submitting bid proposals.- Supervising subcontractors and ensuring quality and speed of execution.- Receiving completed works and reviewing them before moving to the next phase.- Monitoring site material and fabrication needs.- Coordinating between structural works, finishes, electrical, plumbing, insulation, and other items.- Preparing periodic reports on achievements, notes, and site constraints.- Tracking the schedule and ensuring project duration is met.- Maintaining quality of execution, reducing waste, and rework.

Full Time 0 to 0 years Naukri Gulf

Safety Engineer

On-site - Kuwait - Al Ahmadi 14 July 2026

Research & Development

<section>Job DescriptionRoles & Responsibilities<div class="paragraph"><ul><li>Candidates must have relevant experience in Substation and/or Overhead Transmission Line projects, either in India or internationally.</li><li>Develop and implement comprehensive safety programs tailored to Indian regulatory standards and workplace environments.</li><li>Conduct thorough hazard identification and risk assessments (HIRA) for all operational activities, focusing on potential Indian workplace hazards.</li><li>Investigate all accidents, near misses, and unsafe conditions, determining root causes and implementing corrective and preventive actions.</li><li>Ensure compliance with all relevant Indian safety legislation, including the Factories Act, and other applicable regulations.</li></ul></div></section><section>Desired Candidate Profile<ul><li>Bachelor's degree in Engineering (Mechanical, Chemical, Civil, Electrical) or equivalent.</li><li>The engineering college and the relevant discipline must be accredited by the National Board of Accreditation (NBA).</li><li>Possession of a relevant professional safety certification (e.g., NEBOSH IGC, IOSH, or Indian equivalent).</li><li>Minimum of 5 years of progressive experience in safety engineering within the Indian industrial sector.</li><li>Proven experience in implementing and managing OHSAS 18001/ISO 45001 management systems.</li></ul></section>

0 to 0 years Naukri Gulf

Fire Protection Engineer

On-site - Kuwait - Capital Governorate (Kuwait) 16 July 2026

Sales

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">We are seeking a dynamic and result-oriented Fire protection Engineer to drive business growth for our Fire Protection and Fire & Gas (F&G) Engineering Consultancy services. The successful candidate will be responsible for identifying new business opportunities, developing client relationships, preparing technical and commercial proposals, and converting opportunities into awarded projects across the Oil & Gas, Petrochemical, Industrial, Power, Infrastructure, and Commercial sectors.Identify and develop new business opportunities for Fire Protection and Fire & Gas Engineering Consultancy services.Develop and maintain a database of End Clients, EPC Contractors, PMC Consultants, and Industrial Customers.Generate qualified leads through market research, networking, industry events, and client engagement.Build strong relationships with key decision-makers within client organizations.Conduct client meetings to understand project requirements and identify engineering consultancy opportunities.Deliver technical and business presentations showcasing the company's capabilities and value proposition.Coordinate with the engineering team to develop technical solutions and commercial proposals.Prepare, submit, and negotiate technical and commercial proposals.Follow up on submitted proposals and actively drive opportunities through to Purchase Order (PO) award.Maintain an opportunity pipeline and provide regular sales forecasts and progress reports.Monitor market trends, competitor activities, and upcoming projects.Support prequalification submissions, vendor registrations, and framework agreements.Participate in exhibitions, conferences, and industry networking events to enhance business visibility.Business DevelopmentTechnical SalesClient Relationship ManagementProposal PreparationLead GenerationTender ManagementPresentation SkillsNegotiation SkillsMarket IntelligenceStrategic PlanningNumber of new clients developed.Number of qualified opportunities generated.Value of proposals submitted.Proposal-to-order conversion rate.Annual sales/revenue achieved.Customer satisfaction and retention.Growth of key accounts and repeat business.</div></section><section>Desired Candidate Profile<ul><li>Bachelor's Degree in Mechanical, Fire Protection, Instrumentation, Electrical Engineering, or a related discipline.</li><li>10+ years of experience in business development, sales, or technical marketing within Fire Protection, Fire & Gas Consultancy.</li><li>Experience in Oil & Gas, Petrochemical, Industrial, Power, Infrastructure, or Commercial projects.</li><li>Knowledge of Fire Protection Systems, Fire Detection & Alarm Systems, Gas Detection Systems, Passive Fire Protection.</li><li>Experience in the field of Sales and business development in Fire Protection and Fire & Gas detection system Vendors in Kuwait</li><li>Familiarity with NFPA, API, IEC, FM, ISO, and client standards (e.g., KNPC, KOC and Other industrial clients) is an advantage.</li><li>Proven experience in proposal preparation, client presentations, and contract negotiations.</li><li>Excellent communication, presentation, negotiation, and interpersonal skills.</li><li>Proficiency in Microsoft Office (Word, Excel, PowerPoint, Outlook);</li><li>Valid Kuwait driving license is preferred.</li></ul></section>

0 to 0 years Naukri Gulf

Mechanical Engineer

On-site - Kuwait - Capital Governorate (Kuwait) 16 June 2026

Engineering

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">Job descriptionUrgent requirement for KuwaitMechanical Engineer ( Heavy Equipment Industry )Role: Mechanical EngineerIndustry Type: Industrial Equipment / Machinery (Construction Equipment)Department: Construction & Site EngineeringEmployment Type: Full Time, PermanentRole Category: Construction EngineeringEducationUG: B.Tech / B.E. in Any Specialization</div></section>

0 to 0 years Bayt

Senior Instrument & Control Engineer

On-site - Kuwait 10 July 2026

Information Technology

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About Surbana Jurong Surbana Jurong Group (SJ) is a leading global urban, infrastructure, and engineering consulting firm headquartered in Singapore. Driven by a vision to build cities and shape lives, SJ delivers sustainable, innovative, and integrated solutions across the built environment. With a strong presence across Asia, the Middle East, and Africa, SJ provides multidisciplinary expertise in transport, ports, marine, water, energy, buildings, and large-scale infrastructure projects. SJ partners with governments, multilateral development agencies, and private sector clients to plan, design, supervise, and manage complex infrastructure projects throughout their lifecycle. By combining global expertise with local knowledge, SJ delivers practical, high-impact solutions that enhance connectivity, strengthen communities, and support long-term sustainable development. The role We are seeking an experienced Senior Instrument & Control Engineer to support the delivery of major utility, industrial, and infrastructure projects. The successful candidate will provide technical oversight of instrumentation, automation, control, and SCADA systems throughout construction, testing, commissioning, and handover phases, ensuring reliable system integration and operational performance. <ul><li>Provide technical supervision of instrumentation, automation, control, telemetry, and SCADA system installation activities across complex infrastructure projects.</li><li>Review engineering documentation, instrumentation layouts, control philosophies, P&IDs, loop diagrams, technical submittals, and construction methodologies.</li><li>Monitor installation, testing, commissioning, and system performance verification activities to ensure compliance with project requirements and industry standards.</li><li>Support factory and site acceptance testing, loop checking, system integration, and operational readiness assessments.</li><li>Oversee quality assurance and quality control processes for instrumentation, control, and automation systems.</li><li>Coordinate closely with multidisciplinary engineering teams to support seamless integration of electrical, mechanical, process, and control systems.</li><li>Maintain commissioning records, technical documentation, defect tracking registers, and project reporting requirements.</li><li>Review as-built documentation, operation and maintenance manuals, and handover deliverables.</li><li>Provide technical support for troubleshooting, system optimization, risk mitigation, and continuous improvement initiatives.</li></ul>With a track record of achievement in a related role, you will have gained your experience in a consultancy environment and have a passion for building trusted relationships to drive positive change and win new work. Suitable applicants will have/be: <ul><li>Bachelor’s Degree in Instrumentation Engineering, Control Engineering, Electrical Engineering, Automation Engineering, or a related discipline.</li><li>Minimum 15 years’ experience in instrumentation, control, automation, or SCADA engineering on major utility, industrial, water, or infrastructure projects.</li><li>Strong knowledge of PLC, SCADA, telemetry, field instrumentation, control systems, communication networks, and integrated plant automation.</li><li>Demonstrated experience in testing, commissioning, loop checking, system integration, and performance verification of complex control systems.</li><li>Proven ability to review engineering documentation, control philosophies, instrumentation drawings, technical submissions, and contractor deliverables.</li><li>Experience coordinating multidisciplinary interfaces during construction, commissioning, and operational handover phases.</li><li>Excellent communication, stakeholder engagement, and technical reporting skills with strong English language proficiency.</li></ul>Surbana Jurong Group is an equal opportunity employer. We believe that diversity, equity, and inclusion strengthen our people, enrich our perspectives, and enable us to deliver better outcomes for our clients, partners, and the communities we serve. How to apply All applications must be submitted online and for a confidential discussion regarding this opportunity, please contact Taimoor Tariq - Taimoor.tariq@sjgroup.com For further information about Surbana Jurong Group, please visit our website at www.surbanajurong.com. To explore career opportunities and learn more about working with SJ Group, please visit our Careers page at SJ Careers. All recruitment activities are managed by the Recruitment & Talent team. At this stage, this position does not require agency support. Kindly do not forward resumes directly to SJ Group employees. At Surbana Jurong, we put talent, hard work, teamwork and a fun workplace together to approach problems and solve them creatively and collaboratively. Join us in making a positive impact on the world! </div>

0 to 0 years Naukri Gulf

Safety Engineer

On-site - Kuwait - Capital Governorate (Kuwait) 2 July 2026

Research & Development

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">Ensure the health, safety, and environmental (HSE) compliance of maritime & cargo operations. Oversee everything from heavy crane operations & hazardous material handling. Inspect marine vessels, port jetties heavy lifting gear to ensure SWL limits Required Candidate profile Functional safety, hazard identification (HAZID)& knowledge of port yard & stevedoring operations. B.E (Mechanical, Marine, or Industrial) combined with specialized HSE or fire safety qualifications</div></section>

Full Time 0 to 0 years Bayt

Senior Engineer

On-site - Kuwait 20 July 2026

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> We are seeking an experienced Technical Services Senior Engineer for an exciting opportunity based in Shuaiba, Kuwait. The ideal candidate will have proven experience in technical operations, project execution, and facility management within a plastic manufacturing environment. The role is responsible for overseeing manufacturing equipment, optimizing production processes, managing facility-related projects, ensuring compliance with operational standards, and coordinating with government authorities regarding facility requirements. The ideal candidate will have strong experience in manufacturing machinery, process improvement, audits, and industrial facility management.Key Responsibilities<ul><li>Lead technical projects from planning through execution, ensuring delivery within scope, budget, and timeline.</li><li>Oversee the maintenance, performance, and continuous improvement of manufacturing machinery and production equipment.</li><li>Manage facility operations, ensuring infrastructure and utilities support efficient manufacturing activities.</li><li>Monitor and optimize manufacturing processes to improve productivity, quality, and operational efficiency.</li><li>Conduct regular process audits to ensure compliance with established procedures, quality standards, and operational requirements.</li><li>Identify process gaps, recommend corrective actions, and drive continuous improvement initiatives.</li><li>Coordinate preventive and corrective maintenance programs to maximize equipment reliability and minimize downtime.</li><li>Liaise with government authorities to ensure compliance with applicable regulations and obtain necessary approvals.</li><li>Support health, safety, environmental, and regulatory compliance initiatives across the facility.</li><li>Collaborate with Production, Quality, Engineering, and Maintenance teams to resolve technical issues and improve plant performance.</li><li>Prepare technical reports, project updates, maintenance records, and compliance documentation.</li><li>Participate in equipment upgrades, facility expansion projects, and capital investment initiatives. </li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills">Qualifications<ul><li>Bachelor's degree in Mechanical Engineering or Electrical Engineering.</li><li>3-5 years of experience in technical services, engineering, maintenance, or facility management within a manufacturing environment.</li><li>Experience in plastic manufacturing or a similar process industry is highly preferred.</li><li>Strong knowledge of manufacturing machinery, industrial utilities, and production processes.</li></ul></div>

Contract 0 to 0 years Gulf Talnet

Project Engineer

On-site - Kuwait - Capital Governorate (Kuwait) 20 July 2026

Engineering

Urgent Hiring – Project Engineer | Kuwait Engineers India Limited (EIL) is hiring experienced professionals for a client project based in Kuwait. • Location: Client Site, Kuwait Key Responsibilities: • Coordinate engineering and construction activities. • Monitor project progress, schedules, and deliverables. • Liaise with clients, contractors, and multidisciplinary teams. • Ensure compliance with project specifications, quality, HSE, and client requirements. • Prepare and review technical documentation and project reports. • Support project planning, execution, and close-out activities. Preferred Skills: • Strong project coordination and communication skills. • Knowledge of engineering standards and project management practices. • Ability to work in a multidisciplinary team environment. • Proficiency in MS Office and project documentation. Employment Type: • Client Site Deployment (Kuwait) • Minimum 10 years of relevant experience • Educational background in Electrical, Instrumentation, Mechanical, Civil, or Chemical Engineering Experience: • Minimum 10 years of relevant experience in engineering projects. • Experience in project execution, coordination, construction, or maintenance is preferred. Educational Qualification: • Bachelor's Degree in Electrical, Instrumentation, Mechanical, Civil, or Chemical Engineering. Preferred Industry: • Oil & Gas / Petrochemical / Refinery / EPC / Industrial Projects

Contract 0 to 0 years Gulf Talnet

Project Engineer

On-site - Kuwait - Capital Governorate (Kuwait) 20 July 2026

Engineering

0 to 0 years Naukri Gulf

Technical Procurement Engineer

On-site - Kuwait - Capital Governorate (Kuwait) 13 July 2026

Engineering

<section>Job DescriptionRoles & Responsibilities<div class="paragraph">Develop technical specifications, scopes of work, and procurement documents for IAQ and environmental systems. Review engineering drawings, technical datasheets, product catalogs, test reports, and manufacturer documentation. Evaluate supplier technical proposals and verify compliance with project specifications and applicable standards. Prepare technical bid evaluation reports and provide recommendations for supplier selection. Ensure procured equipment complies with applicable environmental, health, and safety regulations. Manage procurement activities from technical evaluation through delivery, installation, and warranty support. Maintain technical documentation, procurement records, equipment specifications, and asset information.</div></section><section>Desired Candidate ProfileBachelor s degree in environmental engineering, Environmental Science, Chemical Engineering, Industrial Engineering, or a related field. Minimum experience in technical procurement, engineering, HVAC, indoor air quality, environmental systems, or related technical fields. Experience with public-sector procurement, EPC projects, or facility management is an advantage.</section>

0 to 0 years Naukri Gulf

Field Engineer

On-site - Kuwait - Capital Governorate (Kuwait) 13 July 2026

Engineering

<section>Job DescriptionRoles & Responsibilities<div class="paragraph"> Your Development Journey You ll be enrolled in our 4-year Field Engineer Technical Development Program, which blends classroom learning with real-world experience: <ul> <li>Year 1: Work with guidance and take part in hands-on training at one of our global centers. Travel may be needed to gain real-world experience </li> <li>Year 2: Take on more responsibility at the wellsite while continuing to grow your technical skills through hands-on and classroom training </li> <li>Years 3 & 4: Expanding your knowledge and skills, and may lead teams at the wellsite while serving as the main contact for our clients </li> </ul> Your day-to-day could include: <ul> <li>Prepare, deploy, and operate advanced downhole tools to meet specific wellsite objectives </li> <li>Utilize cutting-edge simulation software to design and optimize wellsite solutions tailored to client needs </li> <li>Analyse performance data and recommend improvements </li> <li>Manage equipment logistics and ensure seamless setup and operation at the rig site </li> <li>Create detailed post-job reports and share actionable insights with clients and internal teams </li> <li>Champion a culture of continuous improvement with a strong focus on safety, quality, and performance </li> <li>Deliver front-line engineering support to our customers throughout operations, resolving issues independently </li> </ul> What We re Looking For <ul> <li>Graduated with bachelor s degree in engineering (all fields) within the last 24 months </li> <li>No more than 1 year of experience </li> <li>English language fluent proficiency (written and spoken) </li> <li>Strong communication and interpersonal skills </li> <li>Ability to analyse complex problems, apply critical thinking, and make informed decisions </li> <li>A passion for hands-on work and learning in dynamic environments (onshore and offshore) </li> </ul> What to Expect This role is physically and mentally demanding. You ll work 12-hour shifts (day or night), often in tough weather conditions. You may be away from home for extended periods, including weekends and holidays. But if you re up for the challenge, the rewards are big. You ll join one of our specialized product lines, such as: <ul> <li>Completions </li> <li>Drilling Services </li> <li>Wireline Services </li> <li>Artificial Lift </li> <li>Well Services </li> <li>Managed Pressure Drilling and many more </li> </ul> </div></section>

Full Time 0 to 0 years Bayt

Quality Assurance Engineer

On-site - Kuwait 26 July 2026

Manufacturing & Production

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Purpose:To ensure high-quality standards and compliance with QMS and ISO requirements across industrial, civil, and mechanical construction projects Key Responsibilities: QMS Implementation •             Implement and maintain the Quality Management System (QMS) as per ISO 9001 •             Review and approve quality documents such as ITPs and procedures Audits & Inspections •             Perform ISO Lead Audits and regular site quality inspections •             Verify material and workmanship compliance with project specifications Non-Conformance Management •             Identify non-conformances and initiate corrective/preventive actions •             Follow up and close out quality issues effectively Reporting & Support •             Monitor quality performance and prepare reports for management •             Provide QA guidance and training to project teams </div><h2 class="h5">Skills</h2> <div data-jb-field="skills">Qualifications & Experience:Bachelor Degree in Civil / Mechanical EngineeringMinimum 5 years of QA experience in industrial/civil/mechanical constructionStrong knowledge of QMS, ISO requirements, construction processes & quality controlLean Six Sigma Green Belt or Black Belt certification is preferred </div>

0 to 0 years Bayt

Lead HSE Engineer

On-site - Kuwait 29 June 2026

Research & Development

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Title: Lead HSE Engineer Job Title Lead HSE Engineer Project KBR’s Sustainable Technology Solutions (STS) group is looking for a Lead HSE Engineer to support HSE function on PMC Project with Kuwait Oil Company in Kuwait. Summary Section   The Lead HSE engineer will coordinate implementation of the KOC PMC Safety policies, HSE Management System and Project specific HSE Management Plans as they apply to the project. He will ensure that the site complies with the relevant HSE Legislation and KOC HSE requirements. He will develop and implement the project HSE MS. He will develop and maintain Statistical data for the Project and prepare reports as required for the KBR KOC PMC HSEQ Manager. Mandatory Qualifications including Required Education, Experience, & Skills: <ul><li>Bachelor Degree in Engineering</li><li>Minimum 12 years total post-graduation experience.</li><li>Minimum 8 years Oil & Gas post-graduation experience</li><li>Minimum 5 years’ experience in a Lead HSE Engineer role.</li><li>Practical experience of design, construction, commissioning and maintenance aspects of oil/gas installations.</li><li>Practical experience with HSE management systems, reporting and audit procedures. Excellent written coordination and verbal communication skills. Ability to develop, update and maintain in-house procedures. Must be conversant with local and international saftey standards and norms.</li><li>Must possess two or more HSE certifications (certified courses) in General Industrial Safety, Construction Safety, Environmental Management, industrial Hygiene, ISO 14001 / OHSAS 18001 Lead Auditor, NEBOSH, ICertOSH, ASSE Certificate in Global Safety Management or equivalent courses.</li></ul> Responsibilities: - Monitor the EPC contractor HSE Management System and provide advice and assistance to EPC HSE managers so they comply in a consistent way to reduce the risk to the project employees and the environment. - Ensure the EPC contractors develop implement and maintain a specific project Risk Management Plan - Ensure EPC contractor subcontractor selection (ITB) processes are developed and implemented on a timely basis in accordance with KOC expectations. - Provide advice and guidance to the EPC contractor management team on HSE issues through the interpretation of KOC policies and statutory requirements. - Ensure EPC contractors establish and maintain statistical data concerning all matters of health and safety, training programs with which to provide a basis for development of further health and safety activities, to highlight trends for future action. - Monitor compliance with all Kuwait legislative requirements including the dissemination of information to PMC and EPC managers and employees regarding amendments/ additions to requirements as they come into effect. - Review EPC contractor Safety Management System and advise of required changes. - Develop and maintain professional relationships with KOC, regulatory bodies and EPC contractors to foster the professional image of KBR. - Visit the project site on a regular basis to ensure interest and awareness of HSE is maintained, conduct regular safety talks and safety training sessions relative to the nature of activities being undertaken Other key activities shall include but not be limited to the following: <ul><li>Pro-actively visit site and with the EPC contractor implement safety measures-promote/ensure safe work practices</li><li>Ensure quality safety observation program is implemented and maintained on each site/project and ensure follow up on findings</li><li>Assist EPC contractor construction management personnel in identifying hazards and in planning and organizing the work such that a safe working environment is maintained.</li><li>Assist EPC sub-contractor Safety advisors and site management in the development and revision of specific site safety programmes.</li><li>Maintain a HS&E audit and assessment program for the location.</li><li>Carry out regular inspections of the work areas with the respective EPC contractor line manager and or HSE representative and prepare reports.</li><li>Disseminate safety information throughout the workplace via bulletin boards, posters, newsletters etc.</li><li>Assist EPC contractor line management and or construction supervisors in accident investigation process and report accordingly.</li><li>Develop and implement safety initiatives to continually improve, achieve and maintain stated safety performance and objectives.</li><li>Ensure HSE safety inductions are undertaken in accordance with the EPC contractor SMS requirements for all new employees of the company and its subcontractors</li><li>Monitor the availability and use of safety apparel and equipment.</li><li>Provide advice to the EPC subcontractor supervision on the development of project specific procedures and Job Safety Analysis (JSA) training,</li><li>Advise subcontractor supervisory staff and employees in the implementation of strategies to identify and control potential hazards and in the use of the hierarchy of controls</li><li>Ensure all lines of communication on HSE-matters remain open and effective between all parties particularly KOC,KBR, EPC contractors and their sub-contractors.</li></ul> Decarbonization – Energy Transition – Sustainability Belong. Connect. Grow. with KBR! </div>

Full Time 0 to 0 years Gulf Talnet

Lead HSE Engineer

On-site - Kuwait - Capital Governorate (Kuwait) 27 July 2026

Sales

<h4>Project</h4> KBR’s Sustainable Technology Solutions (STS) group is looking for a Lead HSE Engineer to support HSE function on PMC Project with Kuwait Oil Company in Kuwait. <h4>Summary section</h4> The Lead HSE engineer will coordinate implementation of the KOC PMC Safety policies, HSE Management System and project specific HSE Management Plans as they apply to the project. He will ensure that the site complies with the relevant HSE legislation and KOC HSE requirements. He will develop and implement the project HSE MS. He will develop and maintain statistical data for the project and prepare reports as required for the KBR KOC PMC HSEQ Manager. <h4>Mandatory qualifications including required education, experience, & skills:</h4> <ul> <li>Bachelor degree in engineering</li> <li>Minimum 12 years total post-graduation experience</li> <li>Minimum 8 years oil & gas post-graduation experience</li> <li>Minimum 5 years’ experience in a Lead HSE Engineer role</li> <li>Practical experience of design, construction, commissioning and maintenance aspects of oil/gas installations</li> <li>Practical experience with HSE management systems, reporting and audit procedures</li> <li>Excellent written coordination and verbal communication skills</li> <li>Ability to develop, update and maintain in-house procedures</li> <li>Must be conversant with local and international safety standards and norms</li> <li>Must possess two or more HSE certifications (certified courses) in General Industrial Safety, Construction Safety, Environmental Management, Industrial Hygiene, ISO 14001 / OHSAS 18001 Lead Auditor, NEBOSH, ICertOSH, ASSE Certificate in Global Safety Management or equivalent courses</li> </ul> <h4>Responsibilities:</h4> <ul> <li>Monitor the EPC contractor HSE Management System and provide advice and assistance to EPC HSE managers so they comply in a consistent way to reduce the risk to the project employees and the environment</li> <li>Ensure the EPC contractors develop, implement and maintain a specific project Risk Management Plan</li> <li>Ensure EPC contractor subcontractor selection (ITB) processes are developed and implemented on a timely basis in accordance with KOC expectations</li> <li>Provide advice and guidance to the EPC contractor management team on HSE issues through the interpretation of KOC policies and statutory requirements</li> <li>Ensure EPC contractors establish and maintain statistical data concerning all matters of health and safety, training programs with which to provide a basis for development of further health and safety activities, to highlight trends for future action</li> <li>Monitor compliance with all Kuwait legislative requirements including the dissemination of information to PMC and EPC managers and employees regarding amendments/additions to requirements as they come into effect</li> <li>Review EPC contractor Safety Management System and advise of required changes</li> <li>Develop and maintain professional relationships with KOC, regulatory bodies and EPC contractors to foster the professional image of KBR</li> <li>Visit the project site on a regular basis to ensure interest and awareness of HSE is maintained, conduct regular safety talks and safety training sessions relative to the nature of activities being undertaken</li> </ul> Other key activities shall include but not be limited to the following: <ul> <li>Pro-actively visit site and with the EPC contractor implement safety measures - promote/ensure safe work practices</li> <li>Ensure quality safety observation program is implemented and maintained on each site/project and ensure follow up on findings</li> <li>Assist EPC contractor construction management personnel in identifying hazards and in planning and organizing the work such that a safe working environment is maintained</li> <li>Assist EPC sub-contractor Safety advisors and site management in the development and revision of specific site safety programmes</li> <li>Maintain a HS&E audit and assessment program for the location</li> <li>Carry out regular inspections of the work areas with the respective EPC contractor line manager and/or HSE representative and prepare reports</li> <li>Disseminate safety information throughout the workplace via bulletin boards, posters, newsletters etc.</li> <li>Assist EPC contractor line management and/or construction supervisors in accident investigation process and report accordingly</li> <li>Develop and implement safety initiatives to continually improve, achieve and maintain stated safety performance and objectives</li> <li>Ensure HSE safety inductions are undertaken in accordance with the EPC contractor SMS requirements for all new employees of the company and its subcontractors</li> <li>Monitor the availability and use of safety apparel and equipment</li> <li>Provide advice to the EPC subcontractor supervision on the development of project specific procedures and Job Safety Analysis (JSA) training</li> <li>Advise subcontractor supervisory staff and employees in the implementation of strategies to identify and control potential hazards and in the use of the hierarchy of controls</li> <li>Ensure all lines of communication on HSE matters remain open and effective between all parties particularly KOC, KBR, EPC contractors and their sub-contractors</li> </ul> Decarbonization – Energy transition – Sustainability Belong. Connect. Grow. with KBR!

0 to 0 years Bayt

Production Optimization Engineer

On-site - Kuwait 2 July 2026

Engineering

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> The Production Optimization Engineer is responsible for assisting in delivery of safe, efficient, and reliable products and services to our customers. The job consults with operations groups as needed to support the area of expertise and identifies opportunities for continuous improvement of product and service delivery and formally communicates findings. The Production Optimization Engineer actively participates in promoting new technology and services offerings and supports the PL in risk management and applying lessons learned to improve job design and execution as related to the area of expertise. They provide real-time support to operations as required. <ul><li>Provide technical support in the area of expertise throughout the Sales and Product and Service Delivery process.</li><li>Assist as required with the development of technical job designs for PLs.</li><li>Assist with identifying areas where new and cost effective techniques can be applied.</li><li>Explore opportunities for value-added products and services.</li><li>Consult with Design/Technical Engineer role as required to optimize the technical design.</li><li>Assist in real-time incident response, recovery, and investigation as related to the area of expertise.</li><li>Assist in evaluating technical viability and overall appraisal of tenders as related to the area of expertise.</li><li>Remain current on new technologies.</li><li>Maintain customer visibility through active participation in professional society activities and calls for papers.</li><li>Understand the competition's technical offering.</li><li>Participate in external technical societies and communities.</li><li>Contribute, write and review technical publications.</li><li>Engage with local universities, Customer institutes and research organizations.</li></ul>10+ SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law. </div>

0 to 0 years Bayt

Field Engineer

On-site - Kuwait 10 July 2026

Oil, Gas & Energy

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Launch Your Career as a Field Engineer with Weatherford   Are you ready to kick-start your engineering career in a hands-on, high-impact role? At Weatherford, our Field Engineers are the essential connection between our cutting-edge technologies and the real-world challenges faced in oil and gas rigs.   This is more than just a job — it’s an adventure. You’ll be working in the field, often at remote rig sites, where you’ll gain unmatched experience and responsibility from day one. Whether it’s assembling equipment, analysing data, or solving problems on the fly, you’ll be at the heart of operations that matter.   Your Development Journey   You’ll be enrolled in our 4-year Field Engineer Technical Development Program, which blends classroom learning with real-world experience:   <ul> <li>Year 1: Work with guidance and take part in hands-on training at one of our global centers. Travel may be needed to gain real-world experience </li> <li>Year 2: Take on more responsibility at the wellsite while continuing to grow your technical skills through hands-on and classroom training </li> <li>Years 3 & 4: Expanding your knowledge and skills, and may lead teams at the wellsite while serving as the main contact for our clients </li></ul>Your day-to-day could include:   <ul> <li>Prepare, deploy, and operate advanced downhole tools to meet specific wellsite objectives </li> <li>Utilize cutting-edge simulation software to design and optimize wellsite solutions tailored to client needs </li> <li>Analyse performance data and recommend improvements  </li> <li>Manage equipment logistics and ensure seamless setup and operation at the rig site </li> <li>Create detailed post-job reports and share actionable insights with clients and internal teams </li> <li>Champion a culture of continuous improvement with a strong focus on safety, quality, and performance </li> <li>Deliver front-line engineering support to our customers throughout operations, resolving issues independently </li></ul> What We’re Looking For   <ul> <li>Graduated with bachelor’s degree in engineering (all fields) within the last 24 months </li> <li>No more than 1 year of experience </li> <li>English language fluent proficiency (written and spoken) </li> <li>Strong communication and interpersonal skills </li> <li>Ability to analyse complex problems, apply critical thinking, and make informed decisions </li> <li>A passion for hands-on work and learning in dynamic environments (onshore and offshore) </li></ul>What to Expect   This role is physically and mentally demanding. You’ll work 12-hour shifts (day or night), often in tough weather conditions. You may be away from home for extended periods, including weekends and holidays. But if you’re up for the challenge, the rewards are big.   You’ll join one of our specialized product lines, such as:   <ul> <li>Completions  </li> <li>Drilling Services  </li> <li>Wireline Services  </li> <li>Artificial Lift  </li> <li>Well Services  </li> <li>Managed Pressure Drilling…and many more  </li></ul>Why Join Us?   <ul> <li>Fast-track your career with structured development and mentorship  </li> <li>Work with cutting-edge technology in real-world settings  </li> <li>Travel, learn, and grow with a global leader in energy services  </li> <li>Open doors to future roles in operations, product management, sales, and more  </li></ul>Ready to engineer your future? Apply now and start your journey with Weatherford  </div>

0 to 0 years Bayt

Senior Electrical Engineer

On-site - Kuwait 10 July 2026

Engineering

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About Surbana Jurong Surbana Jurong Group (SJ) is a leading global urban, infrastructure, and engineering consulting firm headquartered in Singapore. Driven by a vision to build cities and shape lives, SJ delivers sustainable, innovative, and integrated solutions across the built environment. With a strong presence across Asia, the Middle East, and Africa, SJ provides multidisciplinary expertise in transport, ports, marine, water, energy, buildings, and large-scale infrastructure projects. SJ partners with governments, multilateral development agencies, and private sector clients plan, design, supervise, and manage complex infrastructure projects throughout their lifecycle. By combining global expertise with local knowledge, SJ delivers practical, high-impact solutions that enhance connectivity, strengthen communities, and support long-term sustainable development. The role We are seeking an experienced Senior Electrical Engineer to support the delivery of major water, utility, and infrastructure projects. The successful candidate will provide technical oversight of electrical construction, testing, commissioning, and quality assurance activities, ensuring systems are delivered safely, efficiently, and in accordance with project specifications and industry standards. <ul><li>Provide technical supervision of electrical installation and construction activities for power distribution and utility infrastructure systems.</li><li>Review engineering drawings, technical submissions, equipment specifications, load schedules, and construction methodologies.</li><li>Monitor manufacturing inspections, installation works, testing, commissioning, and performance verification activities to ensure compliance with project requirements and quality standards.</li><li>Support factory and site acceptance testing, system integration activities, and operational readiness assessments.</li><li>Conduct inspections and oversee quality assurance processes for electrical equipment, power systems, motor control installations, and associated infrastructure.</li><li>Coordinate closely with multidisciplinary engineering teams, contractors, suppliers, and stakeholders to support successful project delivery.</li><li>Maintain inspection records, technical documentation, commissioning reports, and project progress reporting requirements.</li><li>Review as-built documentation, operation and maintenance manuals, and support project closeout and handover activities.</li><li>Provide technical guidance in troubleshooting, risk mitigation, system optimization, and continuous improvement initiatives.</li></ul>With a track record of achievement in a related role, you will have gained your experience in a consultancy environment and have a passion for building trusted relationships to drive positive change and win new work. Suitable applicants will have/be: <ul><li>Bachelor's Degree in Electrical Engineering or a related discipline.</li><li>Minimum 15 years' experience in electrical engineering, construction supervision, or delivery of major utility, industrial, water, or infrastructure projects.</li><li>Demonstrated experience with electrical distribution systems, transformers, switchgear, motor control centres (MCCs), cabling, earthing systems, and backup or renewable power installations.</li><li>Strong knowledge of electrical testing, commissioning, performance verification, and quality assurance practices.</li><li>Experience reviewing technical drawings, engineering documentation, inspections, equipment submittals, and contractor deliverables.</li><li>Excellent communication and technical reporting skills, with strong English language proficiency.</li><li>Professional registration, experience with high-voltage systems, water or pumping facilities, industrial plants, renewable energy projects, or Arabic language capability would be advantageous.</li></ul>Surbana Jurong Group is an equal opportunity employer. We believe that diversity, equity, and inclusion strengthen our people, enrich our perspectives, and enable us to deliver better outcomes for our clients, partners, and the communities we serve. How to apply All applications must be submitted online and for a confidential discussion regarding this opportunity, please contact Taimoor Tariq - Taimoor.tariq@sjgroup.com For further information about Surbana Jurong Group, please visit our website at www.surbanajurong.com. To explore career opportunities and learn more about working with SJ Group, please visit our Careers page at SJ Careers. All recruitment activities are managed by the Recruitment & Talent team. At this stage, this position does not require agency support. Kindly do not forward resumes directly to SJ Group employees. At Surbana Jurong, we put talent, hard work, teamwork and a fun workplace together to approach problems and solve them creatively and collaboratively. Join us in making a positive impact on the world! </div>

0 to 0 years Naukri Gulf

Dimensional Test Equipment Engineer

On-site - Kuwait - Capital Governorate (Kuwait) 6 July 2026

Engineering

<section>Job DescriptionRoles & Responsibilities<div class="paragraph"> What You Will Do : The Dimensional Test Equipment (DTE) / Automatic Test Equipment (ATE) Engineer As the principal authority for the support and maintenance of the contractor supplied PATRIOT depot test stations, except for General Electric Test Set, the ATE engineer shall: 1. assist with determining operating ability of all contractor test equipment 2. verify that all test station manuals, test procedures, test software, fixtures, and Units Under Test (UUT) are the correct configuration 3. assist in isolating problems between test station hardware, software, and UUT 4. assist and resolve test station software problems at system and UUT level 5. provide direct interface with contractor test personnel when additional testing experience is required 6. coordinate training with KAD Depot trained technicians 7. schedule both informal classroom and practical exercise training activities that refresh previous depot training lessons The DTE/ATE support personnel provide the technical operating knowledge, electrically and mechanically, as well as extensive practical experience to effectively operate, maintain and provide self-sufficiency training to the in-country support personnel. The DTE specialist will provide hands-on maintenance support and operational training on the repair of the Radar transmitter Battery Replaceable Units (BRU s). Systems are computer driven and training will consist of both electronic and mechanical repair for the units under test. Working under a Patriot Test Station Lead, this position will require hands-on operation, maintenance and sustainment of the PAT 243 and PAT 247 Patriot test stations in support of Patriot Configuration 3+ systems. This will include operating troubleshooting and sustaining the coolant oil processing unit and Radar coolant group to ensure oil flow and glycol resistivity requirements are met for system unit operation. This will also include sustaining and troubleshooting converters, inverters and electric circuit s assembly for the transmission system, by tracking signals and measuring voltage, current and resistance measurements to isolate problems to the component level on the Pat 247 test station. Functionally verifies the operational condition of the PAT 243, 244 and PAT 247 test stations to verify operational status. Demonstrates proper maintenance, sustainment, repair procedures and techniques. Participates in on-the job training programs. Prepares, fills out and submits maintenance reports, system problem reports (SPR s) and performs other duties as directed. This position is located in Kuwait. Qualifications You Must Have : Must have four (4) years of demonstrated knowledge and experience in the operation, maintenance and sustainment of Dimensional Test Equipment (DTE) Station equipment and for testing, troubleshooting and repairing Patriot electronics Assemblies and Subassemblies to the component level, or equivalent test stations. Experienced in reading and understanding engineering drawings, schematics, books, technical documents and PC software. Demonstrated skills in using general tools and general use commercial test equipment, also in replacing component parts on circuit card assemblies. Must be able to work in extreme desert environments and lift 50 pounds. Must have a good understanding of standard industrial test equipment such as digital volt meters, high voltage probes, power meters, spectrum analyzers, frequency counters and oscilloscopes. A Secret Security Clearance is required. Qualifications We Prefer: A minimum of 6 to 8 years hands on knowledge and experience operating, maintaining and sustaining PAT 243, and PAT 244 test stations or equivalent test stations. Demonstrated experience working on Configuration 3 system assemblies and subassemblies. Experience working in and with a Middle East customer directly. Knowledge and experience in maintaining and sustaining DTE test station equipment. Required Education: Bachelor's degree in related field and 8-12 years of related experience. </div></section>

0 to 0 years Bayt

Construction Supervision Manager/Resident Engineer

On-site - Kuwait 9 July 2026

Construction & Real Estate

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About Surbana Jurong Surbana Jurong Group (SJ) is a leading global urban, infrastructure, and engineering consulting firm headquartered in Singapore. Driven by a vision to build cities and shape lives, SJ delivers sustainable, innovative, and integrated solutions across the built environment. With a strong presence across Asia, the Middle East, and Africa, SJ provides multidisciplinary expertise in transport, ports, marine, water, energy, buildings, and large-scale infrastructure projects. SJ partners with governments, multilateral development agencies, and private sector clients to plan, design, supervise, and manage complex infrastructure projects throughout their lifecycle. By combining global expertise with local knowledge, SJ delivers practical, high-impact solutions that enhance connectivity, strengthen communities, and support long-term sustainable development. The role We are seeking a highly experienced Resident Engineer/ Construction Supervision Manager to lead construction supervision activities for a major water infrastructure project. The successful candidate will oversee the delivery of critical water transmission, pumping, and distribution assets, ensuring construction, testing, commissioning, and handover activities are completed in accordance with project requirements, international engineering standards, and quality expectations. <ul><li>Lead and manage a multidisciplinary site supervision team responsible for the delivery of major water infrastructure works.</li><li>Oversee construction, testing, commissioning, and handover activities for water transmission, pumping, and distribution facilities.</li><li>Act as the primary liaison between the client, contractors, and project stakeholders to ensure effective coordination and project delivery.</li><li>Review engineering submissions, technical documentation, and construction methodologies to verify compliance with project requirements and applicable standards.</li><li>Monitor project progress, quality, safety, resource utilization, and construction performance across multiple work fronts.</li><li>Facilitate technical and progress review meetings with project stakeholders and support timely resolution of construction and contractual matters.</li><li>Oversee inspection, testing, commissioning, and performance verification activities to ensure infrastructure assets meet operational requirements.</li><li>Lead contract administration activities, including assessment of variations, claims, payment applications, and project close-out documentation.</li><li>Provide strategic advice on project risks, technical challenges, and contractual issues while supporting successful project outcomes.</li><li>Prepare progress reports, presentations, and project documentation while promoting knowledge sharing and effective team development.</li></ul>With a track record of achievement in a related role, you will have gained your experience in a consultancy environment and have a passion for building trusted relationships to drive positive change and win new work. Suitable applicants will have/be: <ul><li>Master’s degree in civil engineering, or related discipline.</li><li>Minimum 20 years’ experience in engineering, construction supervision, or infrastructure project delivery, including senior leadership roles on major projects.</li><li>Demonstrated experience as a Resident Engineer, Project Manager, Construction Manager, or similar leadership role on large-scale infrastructure, utilities, water, transportation, or industrial projects.</li><li>Extensive experience working under internationally recognized forms of contract, including FIDIC.</li><li>Excellent client relationship management, communication, negotiation, and technical reporting skills.</li><li>Strong English language proficiency, both written and verbal.</li></ul>Surbana Jurong Group is an equal opportunity employer. We believe that diversity, equity, and inclusion strengthen our people, enrich our perspectives, and enable us to deliver better outcomes for our clients, partners, and the communities we serve. How to apply All applications must be submitted online and for a confidential discussion regarding this opportunity, please contact Taimoor Tariq - Taimoor.tariq@sjgroup.com For further information about Surbana Jurong Group, please visit our website at www.surbanajurong.com. To explore career opportunities and learn more about working with SJ Group, please visit our Careers page at SJ Careers. All recruitment activities are managed by the Recruitment & Talent team. At this stage, this position does not require agency support. Kindly do not forward resumes directly to SJ Group employees. At Surbana Jurong, we put talent, hard work, teamwork and a fun workplace together to approach problems and solve them creatively and collaboratively. Join us in making a positive impact on the world! </div>

Industrial Engineer Jobs in Kuwait

مهندس مدني

Civil Site Engineer

Safety Engineer

Fire Protection Engineer

Mechanical Engineer

Senior Instrument & Control Engineer

Safety Engineer

Senior Engineer

Project Engineer

Project Engineer

Technical Procurement Engineer

Field Engineer

Quality Assurance Engineer

Lead HSE Engineer

Lead HSE Engineer

Production Optimization Engineer

Field Engineer

Senior Electrical Engineer

Dimensional Test Equipment Engineer

Construction Supervision Manager/Resident Engineer

Site Owners

Employers

Job Seekers

Industrial Engineer Jobs in Kuwait

Receive email alerts for Industrial Engineer Jobs in Kuwait jobs