Embedded Systems Engineer Jobs in Kuwait

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The WAN Engineer is required to be certified at the expert level in multiple disciplines of networks and security (e.g. CCNP/CCIE &amp; CISSP). WAN Engineers performs operation and maintenance (O&amp;M) for the RCC-SWA enterprise network infrastructure. WAN Engineers will ensure stability and provide daily support of a geographically dispersed Wide Area Network Infrastructure and are responsible for design, troubleshooting, optimization, administration, change management and technical documentation. Must have expert knowledge of Cisco routers, switches, VPN devices, and routing protocols. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Security Clearance: Requires an active Secret Clearance</li><li>Education / Certifications: One-year related experience can be substituted for one year of education if the degree is required. Associates Degree or equivalent experience preferably in Computer Science or MIS, IS, Engineering or related field. This position requires candidates to adhere to DoD 8570.01M. All candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. Baseline certifications cannot also be used as a Computing Environment (CE) certification. The authorized certifications for this job title are listed as follows: BASELINE: Cisco: CCNP: Certified Network Professional - Security ( Cannot be used as a dual qualifier ) CompTIA: CASP+ ce: Advanced Security Practitioner CompTIA: SecurityX ce GIAC: GCED: Certified Enterprise Defender GIAC: GCIH: Certified Incident Handler ISACA: CISA: Certified Information Systems Auditor ISC2: CCSP: Certified Cloud Security Professional ISC2: CISSP ( or Associate ): Certified Information Systems Security Professional COMPUTING ENVIRONMENT (CE): Cisco: CC-DN-A: Certified DevNet Associate Cisco: CCIE: Certified Internetwork Expert ( Any ) Cisco: CCNP: Certified Network Professional ( Any ) ( Cannot be used as a dual qualifier )</li><li>Experience : One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree in a Software Engineering or Business Information Systems discipline for three years general experience. At least 10 years of practical experience working with network and systems technologies. A high level of understanding and experience with data network systems, routing, switching, Virtual Routing and Forwarding (VRF), MPLS, and layer 2 protocols. Experience with VPN technologies. A solid background with TCP/IP and must be able to troubleshoot all supported network protocols. Experience with creating and maintaining custom python scripts. Experience working with and maintaining Cisco DNA Center Experience with a customer service-oriented company.</li><li>Skills &amp; Technology Used: Ability to verify that all systems under the direct control of RCC-SWA are properly configured in accordance with the Higher Headquarters, Local, and DISA STIG configuration policies. Ability to manage asset documentation for accreditation and authorization. Ability to assess networking requirements and provide solutions. Ability to make accurate and independent decisions under pressure. Ability to successfully execute many complex tasks simultaneously. Expert ability to troubleshoot infrastructure equipment. Excellent organizational, interpersonal, written, and verbal communication skills Ability to perform comfortably in a fast-paced, deadline-oriented work environment. Ability to successfully execute many complex tasks simultaneously across departmental boundaries.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>COMBINED GENERAL URGENT REQUIREMENT KUWAIT LONG-TERM OIL &amp; GAS PROJECT</p><p>Job Category: Oil &amp; Gas Construction / EPC Project</p><p>INTERVIEW MODE: ONLINE INTERVIEW</p><p><br></p><p>EXPERIENCE REQUIRED</p><p>Minimum: 8 Years</p><p>Maximum: 10 Years</p><p>Key Highlights for Poster:</p><ul><li>510+ Years Oil &amp; Gas Experience Required</li><li>Kuwait Society of Engineering Approval (Engineers)</li><li>Oil Company Approval Preferred</li><li>CSWIP / NACE / HSE Certifications Required</li><li>Accommodation Provided (Selected Categories)</li></ul><p>Interview Mode: Online Interview</p><p>Education Section:</p><p>QA/QC Engineer (Mechanical)</p><ul><li>Ensure project quality standards and specifications are followed</li><li>Review drawings, procedures, ITPs, and inspection documents</li><li>Conduct inspections for mechanical works, piping, equipment installation</li><li>Prepare QA/QC reports and coordinate with client inspectors</li></ul><p>Civil Site Engineer</p><ul><li>Supervise civil construction activities at site</li><li>Monitor concrete works, foundations, structures, and site execution</li><li>Ensure work follows drawings, specifications, and safety standards</li><li>Coordinate with contractors and project teams</li></ul><p>Mechanical Site Engineer</p><ul><li>Supervise mechanical installation activities</li><li>Monitor piping, equipment erection, and mechanical works</li><li>Ensure compliance with engineering standards and project requirements</li><li>Coordinate inspections and site progress</li></ul><p>Electrical Site Engineer</p><ul><li>Supervise electrical installation works</li><li>Ensure proper execution of electrical systems and equipment</li><li>Review drawings and conduct inspections</li><li>Coordinate testing and commissioning activities</li></ul><p>HSE / Safety Engineer</p><ul><li>Implement HSE policies and safety procedures</li><li>Conduct safety inspections, audits, and toolbox talks</li><li>Monitor site safety compliance</li><li>Prepare safety reports and incident investigation.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor of Engineering (B.E)</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>About Surbana Jurong</b></p><br><p>Surbana Jurong Group (SJ) is a leading global urban, infrastructure, and engineering consulting firm headquartered in Singapore. Driven by a vision to build cities and shape lives, SJ delivers sustainable, innovative, and integrated solutions across the built environment. With a strong presence across Asia, the Middle East, and Africa, SJ provides multidisciplinary expertise in transport, ports, marine, water, energy, buildings, and large-scale infrastructure projects.</p><br><p>SJ partners with governments, multilateral development agencies, and private sector clients to plan, design, supervise, and manage complex infrastructure projects throughout their lifecycle. By combining global expertise with local knowledge, SJ delivers practical, high-impact solutions that enhance connectivity, strengthen communities, and support long-term sustainable development.</p><br><p><b>The role</b></p><br><p>We are seeking an experienced <b>Senior Pipeline Infrastructure Engineer/</b> <b>Senior Pipeline &amp; Utilities Engineer</b> to support the delivery of major water, utility, and infrastructure projects. The successful candidate will provide technical oversight of pipeline construction, installation, testing, quality assurance, and commissioning activities, ensuring works are delivered safely, efficiently, and in accordance with project specifications and industry standards.</p><br><ul><li>Provide technical supervision of pipeline installation and construction activities, including transmission pipelines, valves, chambers, and associated infrastructure works.</li><li>Review engineering drawings, alignment plans, welding and jointing procedures, construction methodologies, and contractor submissions.</li><li>Monitor installation, inspection, testing, commissioning, and performance verification activities to ensure compliance with project requirements.</li><li>Support hydrostatic testing, pressure testing, pipeline integrity assessments, and acceptance testing processes.</li><li>Oversee trenching, bedding, backfilling, reinstatement, and associated civil works related to pipeline construction activities.</li><li>Coordinate with contractors, utility stakeholders, and multidisciplinary project teams to facilitate successful project execution.</li><li>Ensure compliance with applicable specifications, standards, quality assurance requirements, and safety procedures.</li><li>Maintain inspection records, technical documentation, defect registers, and project reporting requirements.</li><li>Review as-built documentation, completion records, and handover deliverables for pipeline infrastructure projects.</li><li>Provide technical expertise in troubleshooting, risk mitigation, construction planning, and project performance improvement initiatives.</li></ul><p>With a track record of achievement in a related role, you will have gained your experience in a consultancy environment and have a passion for building trusted relationships to drive positive change and win new work.</p><br><p>Suitable applicants will have/be:</p><br><ul><li>Bachelor’s Degree in Civil Engineering, Mechanical Engineering, or a related discipline.</li><li>Minimum 15 years’ experience in pipeline engineering, construction supervision, or delivery of major infrastructure projects.</li><li>Demonstrated experience with large-diameter transmission pipelines, utility networks, or major water conveyance systems.</li><li>Strong knowledge of pipeline construction methodologies, welding and jointing practices, pressure testing, quality assurance, and inspection procedures.</li><li>Proven experience managing both pipeline and associated civil works activities during construction phases.</li><li>Experience reviewing engineering drawings, technical specifications, contractor documentation, and construction methodologies.</li><li>Knowledge of pipeline commissioning, operational readiness, and asset handover processes.</li><li>Experience with trenchless works, utility crossings, road crossings, or complex pipeline installation environments.</li><li>Excellent communication, stakeholder management, and technical reporting skills with strong English language proficiency.</li></ul><p>Surbana Jurong Group is an equal opportunity employer. We believe that diversity, equity, and inclusion strengthen our people, enrich our perspectives, and enable us to deliver better outcomes for our clients, partners, and the communities we serve.</p><br><p><b>How to apply </b></p><br><p>All applications must be submitted online and for a confidential discussion regarding this opportunity, please contact<b>&nbsp;Taimoor Tariq - </b><b>Taimoor.tariq@sjgroup.com</b></p><br><p>For further information about Surbana Jurong Group, please visit our website at www.surbanajurong.com.</p><br><p>To explore career opportunities and learn more about working with SJ Group, please visit our Careers page at SJ Careers.</p><br><p>All recruitment activities are managed by the Recruitment &amp; Talent team. At this stage, this position does not require agency support. Kindly do not forward resumes directly to SJ Group employees.</p><br><p>At Surbana Jurong, we put talent, hard work, teamwork and a fun workplace together to approach problems and solve them creatively and collaboratively. Join us in making a positive impact on the world!</p><br> </div>

Project Engineer<br><br> Job Id :100195421<br><br>Jobboard subscription<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>Project Engineer Required with Civil Engineering Background.<br><br>2-3 years experience is acceptable.<br><br>Knowledge in Dewatering and Shoring will be an added advantage.<br><br>Interested Candidates, please share your CV to mthomas@aptkuwait.com.<br><br>Basic Details<br><br>Location : Mangaf , Kuwait<br><br>Qualification<br><br>Posted : Today<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : Not-Mentioned<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : mthomas@aptkuwait.com

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Job Summary</strong></p><br> <p>The Junior Backend Engineer will contribute to the development, testing, and maintenance of reliable backend services and APIs for the V-Thru platform. The role will work under the guidance of senior engineers to deliver well-scoped software that meets quality, security, and performance standards while continuously developing technical skills, knowledge, and ownership.</p><br> <p><strong>Key Responsibilities</strong></p><br> <p><strong>Development &amp; Delivery</strong></p><br> <ul> <li>Implement assigned features, enhancements, and bug fixes across any product domain within the backend, adhering to established coding conventions.</li> <li>Develop and maintain REST APIs and backend services under the direction of senior engineers.</li> <li>Work with the platform's data and infrastructure stack — MySQL, MongoDB, Redis (caching), RabbitMQ (async messaging), and Docker-based local development — using Doctrine ORM/ODM where applicable.</li> </ul> <p><strong>Quality &amp; Testing</strong></p><br> <ul> <li>Write unit and integration tests for all delivered code; treat test coverage as a completion criterion.</li> <li>Write code that is maintainable, readable, and easy to extend.</li> <li>Debug reported issues by reproducing, identifying root cause, resolving, and adding regression coverage.</li> <li>Address feedback from code reviews and static analysis promptly.</li> </ul> <p><strong>Standards &amp; Compliance</strong></p><br> <ul> <li>Adhere to the team's engineering standards and conventions (code style, type safety, exception handling, database access, caching, testing, security, and data privacy).</li> <li>Follow established security, privacy, and secure-coding practices when handling customer and business data.</li> </ul> <p><strong>Technical Competencies</strong></p><br> <ul> <li>Foundational computer-science knowledge — data structures, algorithms, and basic complexity — sufficient to implement well-scoped tasks correctly.</li> <li>Understanding of the software development lifecycle: writing, testing, reviewing, and shipping code.</li> <li>Awareness of common design patterns and core programming principles (e.g., separation of concerns, DRY, SOLID) — able to work within them when applied by the team.</li> <li>Comfort with at least one programming paradigm (object-oriented or functional) and demonstrated ability to learn unfamiliar languages, frameworks, and technologies quickly.</li> <li>Basic familiarity with databases and data modeling (relational and/or NoSQL).</li> <li>Working knowledge of version control (Git), APIs, and automated testing as everyday practices.</li> </ul> <p><strong>Learning &amp; Aptitude</strong></p><br> <ul> <li>Fast learner — picks up unfamiliar languages, tools, and codebases quickly with guidance.</li> <li>Good problem solver — breaks problems into manageable pieces and works toward the root cause.</li> <li>Curious — takes interest in how and why systems work.</li> <li>Adaptable — comfortable with changing tools, paradigms, and requirements.</li> </ul> <p><strong>Behavioral Competencies</strong></p><br> <ul> <li>Coachable — receptive to feedback and quick to apply it.</li> <li>Detail-oriented and disciplined about quality and standards.</li> <li>Clear written and verbal communication in English.</li> <li>Ownership and accountability for assigned work.</li> </ul> <p><strong>Preferred Qualifications (Non-Essential) Competencies</strong></p><br> <ul> <li>Experience with programming language such as Php or Python.</li> <li>Experience with a modern web framework (e.g., Symfony, Laravel, Django, Rails, Spring).</li> <li>Exposure to Docker and containerized development.</li> <li>Familiarity with NoSQL (MongoDB), caching (Redis), or message queues (RabbitMQ).</li> <li>CI/CD exposure; e-commerce or payment-integration experience.</li> </ul> <p><strong>Education</strong></p><br> <ul> <li>Bachelor's degree in <strong>Computer Science, Software Engineering, Computer Engineering</strong>, or a related field.</li> <li>Equivalent practical experience may also be considered.</li> </ul> <p><strong>Experience</strong></p><br> <ul> <li><strong>0–2 years</strong> of software development experience.</li> <li>Fresh graduates are welcome to apply.</li> </ul><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><strong>About us</strong>&nbsp;</span></p><br><p><span>Worley is a global company of energy, chemicals and resources experts headquartered in Australia. We partner with our customers to deliver projects and create value across the life of their assets. We specialize in consulting, engineering, procurement and construction across the project lifecycle, with services extending through to operations and decommissioning. Leveraging extensive experience and AI-enabled delivery, we support customers in navigating complexity as they meet today's needs and transition to more sustainable solutions.&nbsp;</span></p><br><p><span><strong>Primary objective</strong></span></p><br><ul><li><span>Facilitate the development and effective implementation of Project Quality Management Systems by the Project Team in a manner that meets Corporate, location and contractual requirements.</span></li><li><span>Manage project service and product verification and inspection the project consistent with criticality assessments and contractual and regulatory obligations.</span></li><li><span>Manage project quality support functions including quality planning, preventive action, non-conformance control, corrective action, audits and project quality reporting and review.</span></li><li><span>Accountable for QA/QC related matters at Projects site.</span></li><li><span>Must have experienced in Inspections of all Stages of projects in Oil &amp; Gas installations and construction QA/QC works.</span></li><li><span>Excellent written, co-ordination and verbal communication skills.</span></li><li><span>Ability to develop, update and maintain in-house technical standards and specifications.</span></li><li><span>Familiarity with ISO 9000 Series and International Standards relevant to Oil and Gas Industry.</span></li></ul><p><span><strong>What you will bring:</strong></span></p><br><p><span><strong>HSE Management</strong></span></p><br><ul><li><span>Demonstrate behavior and practices consistent with Managerial, co-worker and community duty of care obligations.</span></li><li><span>Work with the Project HSE Advisor and the Project Management Team to ensure that all areas of the Project’s operations conform to applicable WorleyParsons, regulatory and contractual HSE obligations.</span></li></ul><p><span><strong>Quality Management&nbsp;</strong></span></p><br><ul><li><span>Work with the Location Quality Manager and the Project Management Team to ensure:</span></li><li><span>Project Management Plans and dependent systems and procedures are developed and implemented in compliance with the requirements of the WorleyParsons Project Management Process (WPMP) and Enterprise Management System (EMS) consistent with specific location, regulatory and contractual requirements</span></li><li><span>Project personnel are suitably trained in project plan requirements and to access and apply dependent systems, procedures and reference materials via the Project Web Site, EMS, WPMP and the Knowledge Communities as applicable.</span></li><li><span>Effectiveness of quality planning to ensure that process controls and prerequisite product and service verification and inspection arrangements are established and resourced for the project consistent with criticality, statutory and contractual obligations.</span></li><li><span>Effective planning and implementation of design control, verification, validation and review activities.</span></li><li><span>Effective implementation and coordination of vendor assessment and inspection activities.</span></li><li><span>Effective implementation and verification of construction inspection and testing activities.</span></li><li><span>Effective implementation of non-conformance, corrective action, and preventive action management processes.</span></li><li><span>Establishment of an effective risk-based audit program.</span></li><li><span>Effectiveness of Project Management Review Programs including collection analysis and reporting of project performance measures.</span></li></ul><p><span><strong>Capability Enhancement</strong></span></p><br><ul><li><span>Participate in the global quality learning community initiative to enable quality professionals to communicate with each other and receive updates on latest developments.</span></li><li><span>Support in-house education, promotion and awareness programs relating to sound quality management practice and WorleyParsons quality strategies.</span></li><li><span>Facilitate the implementation of existing and new company processes and capability enhancements across the Project Operations.</span></li><li><span>Determine areas of potential improvement and, in consultation with the Location Quality Manager and Project Management Team, facilitate the implementation of improvements to address these areas and evaluate the outcomes of the improvements. if this position has determined them should not he/she take ownership)</span></li><li><span>Facilitate independent review/certification of Project Quality Management Systems in line with Corporate, legislative or customer requirements.</span></li></ul><p><span><strong>Customer Relationships</strong></span></p><br><ul><li><span>Ensure that the customer’s quality management requirements and concerns and the needs of multiple stakeholders are being identified and managed by the Project Team effectively.</span></li></ul><p><span><strong>Resources</strong></span></p><br><ul><li><span>In conjunction with the Project Management Team and the Location Quality Manager recruit and allocate quality practitioners to project verification and inspection roles to ensure these activities are suitably resourced and</span></li><li><span>Ensure that the new quality practitioners are effectively inducted in all aspects that relate to the Quality aspects of the Project.</span></li></ul><p><span><strong>Performance Management</strong></span></p><br><ul><li><span>In conjunction with Project Management Team and the Location Quality Manager:</span></li><li><span>Provide functional leadership for project quality personnel.</span></li><li><span>Strengthen and coach project quality personnel to support development, management and administration of project quality management systems in response to project and customer expectations</span></li></ul> <p><span><strong>Qualifications / Experience</strong>:</span></p><br><ul><li><span><span>Full-time Bachelor’s Degree in Engineering (any discipline) from an accredited university</span></span></li><li><span>Minimum 8 years of total experience post graduate studies</span></li><li><span>Minimum 5 years of experience in the oil &amp; gas, refinery, or petrochemical industry</span></li><li><span>Minimum 5 years of experience as a QA/QC Engineer or equivalent</span></li><li><span>Must have experienced in Inspections of all Stages of projects in Oil &amp; Gas installations and construction QA/QC works.&nbsp;</span></li><li><span>Must have experience in developing, updating and maintaining in-house technical standards and specifications.&nbsp;</span></li><li><span>Fully conversant with NDE requirements and sour environments.</span></li><li><span>Familiarity with ISO 9000 and 14000 Series and international standards relevant to oil and gas industry.</span></li><li><span>Excellent written, coordination and verbal communication skills.</span></li></ul><br><p><span><strong>Moving forward together</strong></span></p><br><p><span>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard.</span></p><br><p><span>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here.</span></p><br><p><span>And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.</span></p><br> </div>

<p><b>Role: MEP Engineer</b></p><p>Industry Type: Oil &amp; Gas</p><p>Department: Construction &amp; Site Engineering</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Construction Engineering</p><p>Education</p><p>UG: B.Tech / B.E. in Mechanical Engineering, Electrical</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>QA/QC Engineers &amp; Inspectors – Oil &amp; Gas</p><p><br></p><p><b>Disciplines: Mechanical / Civil / Electrical / Instrumentation</b></p><p><br></p><p>We are seeking experienced <b>QA/QC Engineers and Inspectors</b> for Oil &amp; Gas projects across Mechanical, Civil, Electrical, and Instrumentation disciplines. The successful candidates will be responsible for ensuring all construction, installation, testing, and commissioning activities comply with project specifications, applicable codes, standards, and client quality requirements.</p><p><br></p><p><b>Key Responsibilities:</b></p><ul><li>Perform inspections and quality control activities during construction and installation phases.</li><li>Review and implement Inspection &amp; Test Plans (ITPs), Method Statements, and Quality Procedures.</li><li>Conduct material receiving, in-process, and final inspections.</li><li>Verify compliance with project specifications, drawings, international standards, and client requirements.</li><li>Prepare inspection reports, NCRs, punch lists, and quality documentation.</li><li>Coordinate with construction teams, subcontractors, and client representatives to resolve quality issues.</li><li>Witness testing, calibration, commissioning, and acceptance activities as applicable.</li></ul><p><br></p><p><b>Requirements:</b></p><ul><li>Bachelor's Degree/Diploma in relevant Engineering discipline.</li><li>Minimum 5+ years of QA/QC experience in Oil &amp; Gas, Petrochemical, Refinery, or EPC projects.</li><li>Strong knowledge of relevant international codes and standards.</li><li>Experience in inspection, testing, documentation, and quality management systems.</li><li>Relevant certifications and client approvals are preferred.</li><li><br></li></ul><p><b>Positions Available:</b></p><ul><li>QA/QC Mechanical Engineer / Inspector</li><li>QA/QC Civil Engineer / Inspector</li><li>QA/QC Electrical Engineer / Inspector</li><li>QA/QC Instrumentation Engineer / Inspector</li></ul><p><br></p><p>Candidates with GCC/Oil &amp; Gas project experience will be given preference.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Requirements:</b></p><ul><li>Bachelor's Degree/Diploma in relevant Engineering discipline.</li><li>Minimum 5+ years of QA/QC experience in Oil &amp; Gas, Petrochemical, Refinery, or EPC projects.</li><li>Strong knowledge of relevant international codes and standards.</li><li>Experience in inspection, testing, documentation, and quality management systems.</li><li>Relevant certifications and client approvals are preferred.</li><li><br></li></ul><p><b>Positions Available:</b></p><ul><li>QA/QC Mechanical Engineer / Inspector</li><li>QA/QC Civil Engineer / Inspector</li><li>QA/QC Electrical Engineer / Inspector</li><li>QA/QC Instrumentation Engineer / Inspector</li></ul><p><br></p><p>Candidates with GCC/Oil &amp; Gas project experience will be given preference.</p></div>

<p>Design and Estimate the value of project being tendered as part of the team. Work experience as Design Engineer in MNC Companies like SAIPEM, PETROFAC, TECHNIP, L&amp;T, MCDERMOTT, WOOD, WORLEY, FLUOR etc., would be preferred.</p><p>Role: Tender Manager</p><p><strong>Desired Candidate Profile</strong></p><p>Work experience as Design Engineer in MNC Companies like SAIPEM, PETROFAC, TECHNIP, L&amp;T, MCDERMOTT, WOOD, WORLEY, FLUOR etc., would be preferred.</p>

Building on our past. Ready for the future<br><br>Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We’re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.<br><br>Primary Objective<br><br>To coordinate implementation of the KOC PMC Safety policies, HSE Management System and Project specific HSE. Management Plans as they apply to the project. Ensure that the site complies with the relevant HSE Legislation and KOC HSE requirements. Develop and implement the project HSE MS. Develop and maintain Statistical data for the Project. Prepare reports as required for the Worley Parsons KOC PMC HSEQ Manager. Position Reports to: HSE / QA / QC Manager.<br><br>Specific Accountabilities<br><br>Monitor the EPC contractor HSE Management System and provide advice and assistance to EPC HSE managers so they comply in a consistent way to reduce the risk to the project employees and the environment. Ensure the EPC contractors develop implement and maintain a specific project Risk Management Plan. Ensure EPC contractor subcontractor selection (ITB) processes are developed and implemented on a timely basis in accordance with KOC expectations. Provide advice and guidance to the EPC contractor management team on HSE issues through the interpretation of KOC policies and statutory requirements. Ensure EPC contractors establish and maintain statistical data concerning all matters of health and safety, training programs with which to provide a basis for development of further health and safety activities, to highlight trends for future action. Monitor compliance with all Kuwait legislative requirements including the dissemination of information to PMC and EPC managers and employees regarding amendments/ additions to requirements as they come into effect. Review EPC contractor Safety Management System and advise of required changes. Develop and maintain professional relationships with KOC, regulatory bodies and EPC contractor to foster the professional image of Worley Parsons. Visit the project site on a regular basis to ensure interest and awareness of HSE is maintained, conduct regular safety talks and safety training sessions relative to the nature of activities being undertaken. Other key activities shall include but not be limited to the following:Pro-actively visit site and with the EPC contractor implement safety measures- promote/ensure safe work practices. Ensure quality safety observation program is implemented and maintained on each site/project and ensure follow up on findings. Assist EPC contractor construction management personnel in identifying hazards and in planning and organizing the work such that a safe working environment is maintained. Assist EPC sub-contractor Safety advisors and site management in the development and revision of specific site safety programmers. Maintain a HS&E audit and assessment program for the location. Carry out regular inspections of the work areas with the respective EPC contractor line manager and or HSE representative and prepare reports. Disseminate safety information throughout the workplace via bulletin boards, posters, newsletters etc. Assist EPC contractor line management and or construction supervisors in accident investigation process and report accordingly. Develop and implement safety initiatives to continually improve, achieve and maintain stated safety performance and objectives. Ensure HSE safety inductions are undertaken in accordance with the EPC contractor SMS requirements for all new employees of the company and its subcontractors Monitor the availability and use of safety apparel and equipment. Provide advice to the EPC subcontractor supervision on the development of project specific procedures and Job Safety Analysis (JSA) training,Advise subcontractor supervisory staff and employees in the implementation of strategies to identify and control potential hazards and in the use of the hierarchy of controls Ensure all lines of communication on HSE-matters remain open and effective between all parties particularly KOC, Worley Parsons, EPC contractors and their subcontractors.<br><br>Qualification<br><br>Bachelor's degree in engineering (Mechanical, Chemical, Petroleum, Fire & Safety, Environment, Production, Industrial, Electrical, Instrumentation or Civil.) Minimum years total post-graduation experience. Minimum years Oil & Gas post-graduation experience. Minimum years' experience in a Safety /HSE Engineer. Practical experience with HSE management systems, reporting and audit procedures. Ability to develop, update and maintain in – house procedures. Must be conversant with local & international safety standards and norms. Practical experience of design, construction, commissioning and maintenance aspects of oil & gas installations.<br><br>Moving forward together<br><br>We’re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.<br><br>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.<br><br>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.<br><br>Whatever your ambition, there’s a path for you here. And there’s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span><strong>Systems Engineer – OT/Cyber</strong></span></span></p><br><p><span><span><strong>Location – Kuwait (North/South Gulf region)</strong></span></span></p><br><p><span><span>We are looking for a Systems Engineer to work closely with a sales representative in a defined territory. The Systems Engineer's main mission will be to support the sales organization in all technical matters regarding OT/Cyber Security, pre-sales, sales calls, and post-sales.</span></span></p><br><p><span><span>This exciting role will require an OT/Cyber Security technical expert, who will have a focused messaging, proactively approach customer OT buying centres, create positive awareness around Fortinet OT proposition. You will support your Sales colleagues to develop and close OT opportunities.&nbsp;</span></span></p><br><p><span><span><strong><u>With us you will</u></strong></span></span></p><br><ul><li><span><span>Lead all technical aspects of a sales cycle with the Enterprise customers, from the initial RFIs, through to RFPs &amp; RFQs when required. This includes the project management and active participation in POCs in partnership with the relevant teams both internally and within the customer and/or commercial partner.</span></span></li><li><span><span>Have the ability to listen and to understand the technical requirements of the customer, reading between the lines to build a solution which outperforms the competitor offering.</span></span></li><li><span><span>Be the primary technical point of contact for the customer(s) and partners in close collaboration with your sales partner.</span></span></li><li><span><span>Continuously strive to improve knowledge around the Fortinet products and solutions, along with maintaining a deep understanding of the competitive landscape and Fortinet’s ability to provide long lasting protection against the ever-evolving threats.</span></span></li><li><span><span>Have a strong ability to position Fortinet solutions to the customer, whether this be remotely or in person. This requires strong communication skills and the ability to confidently present through whiteboarding, technical white papers, technical plans or customer discussions.</span></span></li><li><span><span>Manage your time effectively when working on multiple deals simultaneously, ensuring a positive customer experience is maintained.</span></span></li><li><span><span>Maintain accurate activity, contact, and account technical information of all customers and prospects in our CRM (Salesforce).</span></span></li></ul><p><span><span><strong><u>Apply if you</u></strong></span></span></p><br><ul><li><span><span>Have a high aptitude for security technology, specifically encryption, authentication, with further knowledge of network security, intrusion detection, anti-virus, routing, switching, LAN and WAN being desirable. The CISSP accreditation would also be beneficial.</span></span></li><li><span><span>Are currently or have previously worked in a pre-sales engineer role, managing end to end technical aspects of deals, through to technical closure.</span></span></li><li><span><span>Can demonstrate your problem solving skills and how this has impacted key wins within your current organisation.</span></span></li><li><span><span>Understand and can demonstrate your ability to build and maintain customer relationships, including your ability to effectively communicate technically to a range of both external and internal stakeholders.</span></span></li><li><span><span>Have a strong understanding of&nbsp;RADIUS, PKI, IKE, Certificates, L2TP, IPSEC, FIREWALL, 802.1Q, MD5, SSH, SSL, SHA1, DES, 3DES</span></span></li></ul><p><span><span><strong><u>What you can expect from us</u></strong></span></span></p><br><ul><li><span><span>Excellent training and development opportunities, providing you with all the tools you need to be successful.</span></span></li><li><span><span>An open working environment, sharing knowledge and information collaboratively and transparently, with respect to everyone’s thoughts and opinions.&nbsp;&nbsp;</span></span></li><li><span><span>The opportunity to be part of an innovative, collaborative and winning team.&nbsp;</span></span></li><li><span><span>A competitive salary and incentive compensation package, including stock awards, health and welfare benefits.</span></span></li></ul><p><span><span>From the start, the Fortinet vision has been to deliver broad, truly integrated, high-performance security across the IT infrastructure.&nbsp;&nbsp;Today, we secure the largest enterprises, service providers and government organizations around the world.</span></span></p><br><p><span><span>Fortinet empowers its customers with intelligent, seamless protection across the expanding attack surface and the power to take on ever-increasing performance requirements of the borderless network – today and into the future.&nbsp;&nbsp;We have proven to be a truly innovative technology driven network security company with over 619 registered Global Patents. This is over 3 times more than our closest most innovative competitor!</span></span></p><br><p><span><span><strong>Why Join Us:</strong></span></span></p><br><p><span><span>At Fortinet, we embrace diversity and inclusivity. </span></span><span><span>We encourage applications from diverse backgrounds and identities.</span></span><span><span> Explore our welcoming work environment designed for a rewarding career journey with an attractive Total Rewards package to support you with your overall health and financial well-being</span><span>. Join us in bringing solutions that make a meaningful and lasting impact to our 660,000+ customers around the globe.</span></span></p><br><p><span><span>We will only notify shortlisted candidates.</span></span></p><br><p><span><span>Fortinet will not entertain any unsolicited resumes, please refrain from sending them to any Fortinet employees or Fortinet email aliases. Should any Agency submit any resumes to Fortinet, these resumes if considered, will be assumed to have been given by the Agency free of any related fees/charges</span></span></p><br><br> </div>

<p>About the Role: We are seeking a skilled Technical Engineer to provide technical support for marine construction and offshore projects. The ideal candidate will be responsible for reviewing designs, preparing technical documentation, coordinating with engineering teams, and ensuring that project activities comply with specifications, codes, and client requirements. Key Responsibilities: • Review and interpret engineering drawings, specifications, and technical documents for marine construction projects • Prepare technical submittals including method statements, calculations, and material specifications • Coordinate with design engineers, project managers, and site teams to resolve technical issues • Ensure all technical activities comply with project specifications, international codes (ISO, BS, ASTM, API), and client requirements • Assist in preparing and reviewing shop drawings, as-built drawings, and technical reports • Provide technical support during construction, installation, and commissioning phases • Conduct technical inspections and quality checks to verify compliance with approved documents • Liaise with clients, consultants, subcontractors, and suppliers on technical matters • Review and approve subcontractor technical submittals and material approvals • Prepare technical queries (TQs) and coordinate with consultants for resolution • Support procurement team in technical evaluation of suppliers and materials • Maintain accurate technical documentation and filing systems • Assist in preparing project close-out reports and technical handover documents • Stay updated on latest engineering standards, technologies, and industry best practices • Provide training and guidance to junior engineers and site staff</p><p>Qualifications & Experience: • Bachelor's degree in Civil Engineering, Mechanical Engineering, Marine Engineering, or related field • Minimum 5+ years of experience as Technical Engineer in marine, construction, or oil & gas industries • Strong knowledge of engineering principles, codes, and standards (ISO, BS, ASTM, API, etc.) • Experience with marine construction, piling, subsea pipelines, or offshore structures is highly preferred • Proficiency in engineering software such as AutoCAD, STAAD Pro, or similar • Familiarity with project documentation and technical submittal processes • Strong understanding of quality assurance and quality control (QAQC) principles • Valid safety certifications (NEBOSH, IOSH, OSHA) preferred • Fluency in English; Arabic or Hindi/Urdu is a plus • Professional membership (e.g., ICE, IMarEST) is an advantage Required Skills: • Strong technical knowledge and analytical abilities • Good communication and coordination skills • Attention to detail for documentation and compliance • Problem-solving and technical troubleshooting skills • Ability to work under pressure and meet deadlines • Team collaboration with engineering, procurement, and construction teams</p>

Technician <br><br> Job Id :100195398<br><br>Jobboard subscription<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>???? WE ARE HIRING | KUWAIT ????????<br><br>We are looking for experienced engineering and technical professionals to join our Hygiene Products Manufacturing Team in Kuwait.<br><br>???? ENGINEERING POSITIONS<br><br> Production Engineer Mechanical Engineer Electrical Engineer<br><br>???? TECHNICIAN POSITIONS<br><br> Mechanical Technician Electrical Technician<br><br>Requirements<br><br>✅ 3–5+ years of experience in manufacturing<br><br>✅ Hands-on experience with production machinery<br><br>✅ Strong troubleshooting and maintenance skills<br><br>✅ Preventive & breakdown maintenance experience<br><br>✅ Engineering/technical qualification relevant to the position<br><br>⭐ Experience in tissue converting, paper converting, packaging, FMCG or similar manufacturing machinery will be highly preferred.<br><br>???? Candidates from Kuwait and overseas are welcome to apply.<br><br>???? Send Your CV<br><br>???? Whats App: +965 97256555<br><br>???? recruit.k81@gmail.com<br><br>Please mention the position applied for when sending your cv<br><br>Basic Details<br><br>Qualification<br><br>Posted : Today<br><br>Job Type : Full-Time<br><br>Jobboard subscription<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : +965 97256555<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : Not-Mentioned

<p>The SOC Engineer is responsible for the design, implementation, configuration, and continuous optimization of ZainTECH's Security Operations Centre (SOC) technology platforms, ensuring secure, scalable, and resilient security monitoring services for enterprise and government customers across the MENA region. This is a hands-on engineering role focused on designing and maintaining Security Information and Event Management (SIEM), Security Orchestration, Automation and Response (SOAR), and supporting security technologies. The role owns the end-to-end lifecycle of security monitoring capabilities - from onboarding new log sources and developing detection content to automating operational workflows and continuously enhancing SOC performance - while ensuring solutions align with customer requirements, cybersecurity best practices, and operational standards. Responsibilities: SIEM &amp; Security Platform Engineering Design, implement, configure, and maintain enterprise SIEM and SOAR platforms supporting ZainTECH's Managed Security Services portfolio. Deploy and maintain highly available, scalable, and secure SOC infrastructure across customer environments. Manage platform upgrades, patching, configuration management, and lifecycle activities to ensure platform stability and performance. Ensure SOC technologies remain aligned with operational, security, and customer requirements. Detection Engineering &amp; Security Content Develop, maintain, and optimise SIEM detection content, including correlation rules, dashboards, reports, alerts, watchlists, and use cases. Improve detection capabilities by analysing emerging threats, attack techniques, and operational trends. Reduce false positives through continuous tuning and refinement of detection logic. Map detection capabilities to recognised cybersecurity frameworks such as MITRE ATT&amp;CK. Platform Integration &amp; Automation Integrate security technologies, cloud platforms, infrastructure, and third-party solutions into the SIEM ecosystem. Develop custom parsers, connectors, and data ingestion mechanisms to support new customer environments. Design and implement SOAR playbooks to automate investigation, enrichment, notification, and response activities. Optimise data collection, normalisation, and event processing to improve operational efficiency. Operational Support &amp; Continuous Improvement Provide technical support to SOC Analysts during security investigations and major incident response activities. Troubleshoot platform issues and perform root cause analysis to maintain service availability. Produce technical documentation, implementation guides, and operational runbooks. Identify opportunities to improve SOC maturity through automation, process optimisation, and engineering best practices. Collaborate with Cybersecurity Consulting, Incident Response, Product Management, and Delivery teams to continuously enhance Managed Security Services.</p><p><strong>Desired Candidate Profile</strong></p><p>3-5 years of hands-on experience designing, implementing, and administering SIEM platforms within enterprise or Managed Security Services environments. Strong experience with one or more SIEM platforms such as Microsoft Sentinel, Splunk Enterprise Security, IBM QRadar, ArcSight, LogRhythm, or Elastic Security. Experience integrating multiple security technologies, including EDR, firewalls, IDS/IPS, cloud security platforms, identity platforms, and threat intelligence feeds. Working knowledge of Windows, Linux, networking, scripting, APIs, and automation technologies. Experience implementing SOAR platforms and security automation workflows. Knowledge of MITRE ATT&amp;CK, threat intelligence integration, and detection engineering principles. Experience supporting enterprise cloud environments including Microsoft Azure, AWS, or Google Cloud Platform. Experience working within a Managed Security Services Provider (MSSP) environment. Bachelor s degree in Cybersecurity, Information Security, Computer Science, Information Technology, Engineering, or a related field. Security +, CEH or any relevant certification preferred</p>

<p><h4>Division / Project</h4> <p>KBR’s Sustainable Technology Solutions (STS) group is looking for a Lead Quality Assurance & Quality Control Engineer for a 5-year PMC contract for the supply of Programme Management services with Kuwait Oil Company. The contract serves to support KOC to achieve its objectives of reaching optimum capacity in its oilfields and enhancing its facilities by the most efficient and economical means available.</p> <p>The contract aims to provide project management, coordination, planning, design, engineering, construction management, contracting, procurement, project controls, and other services for construction of new oil field facilities, upgrading of existing facilities, and transfer of technology.</p> <h4>Primary Objectives</h4> <p>Facilitate the development and effective implementation of Project Quality Management Systems by the Project Team in a manner that meets corporate, location, and contractual requirements.<br> Manage project service and product verification and inspection consistent with criticality assessments and contractual and regulatory obligations.<br> Manage project quality support functions including quality planning, preventive action, non-conformance control, corrective action, audits, and project quality reporting and review.</p> <h4>Qualifications including Required Education, Experience, & Skills</h4> <ul> <li>Bachelor in Engineering Degree</li> <li>12 years total post graduation experience</li> <li>8 years post graduation experience in oil and gas projects</li> <li>5 years post graduation experience in same designation</li> <li>Thorough understanding of the principles and practice of Quality Management and the implementation and improvement of management systems</li> <li>Practical experience of plant and vendor inspection of all types of mechanical equipment typically required at oil & gas installations, both onshore and offshore</li> <li>Ability to develop, maintain, and update in-house technical standards and specifications</li> <li>Communication skills – verbal and written – to report standards and presentation skills</li> <li>Demonstrable capabilities in planning and organizing projects and activities to meet project requirements, e.g. quality planning and resourcing for projects to ensure they are suitably resourced with sufficient and capable quality management expertise</li> <li>Experience in managing a team of quality practitioners</li> <li>Fully conversant with NDE requirements and sour environments</li> <li>Excellent written, coordination, and verbal communication skills</li> <li>Familiarity with ISO 9000 and 14000 Series and international standards relevant to oil and gas industry</li> </ul> <h4>Responsibilities</h4> <p>Work with the HSE / QA QC Manager and the Project Management Team to ensure:</p> <ul> <li>Project Management Plans and dependent systems and procedures are developed and implemented in compliance with the requirements of the WorleyParsons Project Management Process (WPMP) and Enterprise Management System (EMS) consistent with specific location, regulatory, and contractual requirements</li> <li>Project personnel are suitably trained in project plan requirements and to access and apply dependent systems, procedures, and reference materials</li> <li>Effectiveness of quality planning to ensure that process controls and prerequisite product and service verification and inspection arrangements are established and resourced for the project consistent with criticality, statutory, and contractual obligations</li> <li>Effective planning and implementation of design control, verification, validation, and review activities</li> <li>Effective implementation and coordination of vendor assessment and inspection activities</li> <li>Effective implementation and verification of construction inspection and testing activities</li> <li>Effective implementation of non-conformance, corrective action, and preventive action management processes</li> <li>Establishment of an effective risk-based audit program</li> <li>Effectiveness of Project Management Review Programs including collection, analysis, and reporting of project performance measures</li> <li>Participation in the global quality learning community initiative to enable quality professionals to communicate with each other and receive updates on latest developments</li> <li>Facilitation of the implementation of existing and new company processes and capability enhancements across the Project Operations</li> <li>Facilitation of independent review/certification of Project Quality Management Systems in line with company and customer requirements</li> <li>Ensuring that the customer’s quality management requirements and concerns and the needs of multiple stakeholders are identified and managed by the Project Team effectively</li> </ul> <h4>Decarbonization – Energy Transition – Sustainability</h4> <p>Belong. Connect. Grow.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Please submit your CV in English and indicate your level of English proficiency.<br> Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems.<br> Participation is project-based, not permanent employment.<br> What this opportunity involves We're building a dataset to evaluate AI coding agents - how well a model handles real-world developer tasks.<br> You'll create challenging tasks and evaluation criteria within realistic simulated environments: Build realistic developer environments - a virtual company with codebase, infrastructure, and context (tickets, docs, conversations) that forms a believable development history Design tasks from intermediate states of these environments - craft the prompt, define what "solved" means, and ensure the task is solvable by an AI agent Write tests that verify agent solutions - accept all valid approaches and reject incorrect ones, neither too strict nor too lenient Iterate on tasks and tests based on QA feedback - review agent solutions, analyze failures, and refine until the evaluation is fair and robust What this is NOT Not data labeling Not prompt engineering Not writing code from scratch - the agent writes most of the code; you guide and evaluate What we look for 5+ years in software development Core stack: Python (FastAPI), JavaScript/TypeScript (React), Docker, Postgres, Kafka, Redis Experience writing tests (functional, integration) English proficiency - B2+ Why this is hard Frontier models are already good at coding.<br> Creating a task that genuinely challenges the best models is non-trivial.<br> You need to deeply understand where models fail and what scenarios reveal the difference between a good and a bad solution.<br> Tasks have many valid solutions - writing tests that accept all correct solutions and reject incorrect ones is harder than it sounds.<br> How it works Apply → Pass qualification(s) → Join a project → Complete tasks → Get paid Effort estimate Tasks for this project are estimated to take 20 hours to complete, depending on complexity.<br> This is an estimate and not a schedule requirement; you choose when and how to work.<br> Tasks must be submitted by the deadline and meet the listed acceptance criteria to be accepted.<br> Compensation Up to $50/hr equivalent , depending on level and pace.<br> Tasks are estimated at ~20 hours each; you set your own schedule.<br></span> </div>

<p>About the Role: We are seeking a skilled Technical Engineer to provide technical support for marine construction and offshore projects. The ideal candidate will be responsible for reviewing designs, preparing technical documentation, coordinating with engineering teams, and ensuring that project activities comply with specifications, codes, and client requirements. Key Responsibilities: • Review and interpret engineering drawings, specifications, and technical documents for marine construction projects • Prepare technical submittals including method statements, calculations, and material specifications • Coordinate with design engineers, project managers, and site teams to resolve technical issues • Ensure all technical activities comply with project specifications, international codes (ISO, BS, ASTM, API), and client requirements • Assist in preparing and reviewing shop drawings, as-built drawings, and technical reports • Provide technical support during construction, installation, and commissioning phases • Conduct technical inspections and quality checks to verify compliance with approved documents • Liaise with clients, consultants, subcontractors, and suppliers on technical matters • Review and approve subcontractor technical submittals and material approvals • Prepare technical queries (TQs) and coordinate with consultants for resolution • Support procurement team in technical evaluation of suppliers and materials • Maintain accurate technical documentation and filing systems • Assist in preparing project close-out reports and technical handover documents • Stay updated on latest engineering standards, technologies, and industry best practices • Provide training and guidance to junior engineers and site staff</p><p>Qualifications & Experience: • Bachelor's degree in Civil Engineering, Mechanical Engineering, Marine Engineering, or related field • Minimum 5+ years of experience as Technical Engineer in marine, construction, or oil & gas industries • Strong knowledge of engineering principles, codes, and standards (ISO, BS, ASTM, API, etc.) • Experience with marine construction, piling, subsea pipelines, or offshore structures is highly preferred • Proficiency in engineering software such as AutoCAD, STAAD Pro, or similar • Familiarity with project documentation and technical submittal processes • Strong understanding of quality assurance and quality control (QAQC) principles • Valid safety certifications (NEBOSH, IOSH, OSHA) preferred • Fluency in English; Arabic or Hindi/Urdu is a plus • Professional membership (e.g., ICE, IMarEST) is an advantage Required Skills: • Strong technical knowledge and analytical abilities • Good communication and coordination skills • Attention to detail for documentation and compliance • Problem-solving and technical troubleshooting skills • Ability to work under pressure and meet deadlines • Team collaboration with engineering, procurement, and construction teams</p>

QC Engineer <br><br> Job Id :100195374<br><br>Jobboard subscription<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>???? **URGENT VACANCIES – KUWAIT**<br><br>???? QA/QC Engineer – Mechanical<br><br> Experience: 10–15 years<br><br>???? QA/QC Inspector – E&I<br><br> Experience: 5–10 years<br><br>Industry Experience Required<br><br>Candidates should have relevant experience in **Power, Water, Oil & Gas, and Construction Projects**.<br><br>Required Documents** Updated CV Civil ID Copy Work Permit Copy Passport Copy<br><br>Requirements<br><br>✅ Candidates must be **locally available in Kuwait**<br><br>✅ **Immediate joiners** preferred<br><br>???? **Send your updated CV to:**<br><br>**[career@falghanim.com](mailto:career@falghanim.com)**<br><br>Basic Details<br><br>Qualification<br><br>Posted : Today<br><br>Job Type : Full-Time<br><br>Jobboard subscription<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : Not-Mentioned<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : career@falghanim.com

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Develop technical specifications, scopes of work, and procurement documents for IAQ and environmental systems. Review engineering drawings, technical datasheets, product catalogs, test reports, and manufacturer documentation. Evaluate supplier technical proposals and verify compliance with project specifications and applicable standards. Prepare technical bid evaluation reports and provide recommendations for supplier selection. Ensure procured equipment complies with applicable environmental, health, and safety regulations. Manage procurement activities from technical evaluation through delivery, installation, and warranty support. Maintain technical documentation, procurement records, equipment specifications, and asset information.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in environmental engineering, Environmental Science, Chemical Engineering, Industrial Engineering, or a related field. Minimum experience in technical procurement, engineering, HVAC, indoor air quality, environmental systems, or related technical fields. Experience with public-sector procurement, EPC projects, or facility management is an advantage.</p><p></p></section>

<p>Erection Engineer</p><p>&nbsp;</p><p>Bachelor Degree in Electrical Engineering according to Kuwait Bachelor Standard. Atleast 4 Years</p><p>7 Years of Minimum Experience</p><p>&nbsp;</p><p>Key Responsibilities</p><p>Shall have experience in installation of Indoor Gas Insulated Switchgear Substation Projects with exposure of 132KV to 400KV voltage level.&nbsp; Responsible to supervise all the activities at Substation as per Client’s requirement, in concern to complying project task with quality and under required safety measures.&nbsp;&nbsp;</p><p>&nbsp;</p><p>To coordinate with various Sub-contractors like civil, Fire-fighting &amp; HVAC works and to resolve arising site issues.&nbsp;&nbsp;</p><p>&nbsp;</p><p>Shall have good communication skills and knowledge to review all construction drawings, interfacing layouts and all other necessary drawings required for execution of works.</p><p>&nbsp;</p><p>Familiar to review BOMs, Quality plans and to maintain documentation like daily reports, preparation of work schedule, manpower record, material requisition etc.</p>