Elevator Technician Jobs in Kuwait

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The C-12/King Air Army Transport Aircraft Mechanic (FAA A&amp;P) services, repairs and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components. A valid (FAA) A&amp;P Airframe and Powerplant Certificate is Required. Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required. US Citizenship is Required to obtain a US Govt Secret Security Clearance, and for facility access. Operationally checks repaired or modified systems for proper operation. Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment. Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Examine engines for oil leaks and listens to operating engine to detect and diagnose malfunctions. Inspect turbine blades to detect cracks or breaks. Test engine operation, using troubleshooting procedures and diagnostic test equipment, to identify source of malfunction. Replace or repair worn or damaged components using hand tools, gauges, and test equipment. Remove and install engine from aircraft. Disassemble and inspect parts for wear, warping, or other defects. Repair or replace defective engine parts and reassembles and installs engine in aircraft. Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes. May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition. Knowledge of aircraft sub-systems, including maintenance parameter, systems operation, limitations, and technical orders. Ability to become qualified and perform engine runs for the aircraft type they are assigned to support. Ability to read, write, and interpret technical duties is required. Ability to communicate effectively with all levels of employees throughout the organization. May specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies. Perform other qualified duties as assigned. Minimum Requirements High school diploma or GED equivalent is Required. A valid (FAA) A&amp;P Certificate is Required. Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required. Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired. Recent full-time experience in aviation maintenance, on the C-12/King Air Turbo-prop aircraft during the past 12 months is Required. Six (6) months of flight line and overhaul &amp; inspection experience is preferred. Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit. Mechanic Tools/Toolbox Required; mechanics must provide their own shadowed toolbox with each tool etched with PID. *(Company will ship toolbox to Kuwait). A valid US Passport - is Required for deployment/travel to Kuwait; Passport must have a minimum of 18 months remaining before expiration date, must be able to obtain Kuwait Visa. Must be able to pass and clear CENTCOM (CRC) Deployment Training and Army MOD17 Medical for Deployment. Ability to clear the Army MOD 17 Medical is required for Deployment to Kuwait, will occur while attending CRC (DIDC) deployment training. May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations. (AR95-20) Mechanic Pre-employment Medical Requirements: Medical/Physical. All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years. Security Clearance Requirements: Must be able to obtain and maintain a US Govt Secret Security Clearance. Must be able to obtain and maintain facility credentials and authorization. US Citizenship is Required to hold a US Govt Secret Clearance, and facility credentials and authorization to work at this facility. Physical and Additional Qualifications Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit. Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs, ramps, ladders and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to carry, push or pull up to and may exceed 50 pounds. May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet. May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools. Must be able to type using a standard keyboard to communicate through e-mail and various software applications. Must be able to distinguish color and judge three dimensional depths. May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc. Must have minimum 20/100 near and far vision, correctable to 20/20. Must be capable of living and working in a potentially hostile environment for an extended period. May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>A valid (FAA) A&amp;P Airframe and Powerplant Certificate is Required.</li><li>Seven (7) years experience as an (A&amp;P) mechanic with Seven (7) years of specific C-12 / King Air (200/350/1900) Turbo-prop aircraft mechanic hands-on maintenance experience is Required.</li><li>US Citizenship is Required to obtain a US Govt Secret Security Clearance, and for facility access.</li><li>High school diploma or GED equivalent is Required.</li><li>Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate USG armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</li><li>Recent full-time experience in aviation maintenance, on the C-12/King Air Turbo-prop aircraft during the past 12 months is Required.</li><li>Six (6) months of flight line and overhaul &amp; inspection experience is preferred.</li><li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li><li>Mechanic Tools/Toolbox Required; mechanics must provide their own shadowed toolbox with each tool etched with PID.</li><li>A valid US Passport - is Required for deployment/travel to Kuwait; Passport must have a minimum of 18 months remaining before expiration date, must be able to obtain Kuwait Visa.</li><li>Must be able to pass and clear CENTCOM (CRC) Deployment Training and Army MOD17 Medical for Deployment.</li><li>Ability to clear the Army MOD 17 Medical is required for Deployment to Kuwait, will occur while attending CRC (DIDC) deployment training.</li><li>May be required to travel to and between remote locations in austere and/or hostile environments, in support of mission operations.</li><li>Medical/Physical: All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within Ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed Five (5) years.</li><li>Must be able to obtain and maintain a US Govt Secret Security Clearance.</li><li>Must be able to obtain and maintain facility credentials and authorization.</li><li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specs for weight limit.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to carry, push or pull up to and may exceed 50 pounds.</li><li>May be required to lift up to 50 pounds to height of four feet and be required to lift up to 35 pounds to height of 7 feet.</li><li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Must be able to distinguish color and judge three dimensional depths.</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li><li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li><li>Must be capable of living and working in a potentially hostile environment for an extended period.</li><li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>C-17 Mechanical Aircraft Technician</p><br><br><br><p><b>Company:</b></p><br><br>Boeing Operations International Incorporated Kuwait<br><br><p>The Boeing Company is currently seeking a<b> C-17 Aircraft Mechanic</b> to support Boeing Global Services in <b>Al Mubarak Air Base Kuwait</b>.</p><br><br><br><p>This position is part of the on-site C-17 Globemaster III Integrated Sustainment Program maintenance team supporting the Kuwait Air Force (KAF) C-17 aircraft based at Al Mubarak Air Base Kuwait. Applicant will participate in organizational level maintenance activities (e.g. flight line tasks including aircraft servicing, inspections, fault diagnosis and component replacement, and structural repair) associated with day-to-day operations of C-17 Globemaster III aircraft to meet KAF mission requirements.</p><br><br><br><p>Additionally, participation in Intermediate level maintenance activities (e.g. back-shop tasks including component repair, test set operation, battery charging, and scheduled periodic inspections) will be required.</p><br><br><br><p><b>Position Responsibilities:</b></p><br><br><ul><li><p>English is the primary language of the KAF community on the airbase in Kuwait. All technical data to perform the tasks and training are in English.</p><br><br></li><li><p>Competency in reading, comprehension and speaking the English language is necessary.</p><br><br></li><li><p>Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes.</p><br><br></li><li><p>Oversees assembly, disassembly or overhaul.</p><br><br></li><li><p>Configures aerospace vehicles and bench test equipment.</p><br><br></li><li><p>Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components.</p><br><br></li><li><p>Performs validation/verification testing of systems and components.</p><br><br></li><li><p>Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results).</p><br><br></li><li><p>Inspects components and verifies repairs for flight worthiness requirements.</p><br><br></li><li><p>Oversees training.</p><br><br></li><li><p>Works under general direction.</p><br><br></li></ul><br><p><b>This position requires the ability to obtain a US Security Clearance for which the US Government requires US Citizenship. An interim and/or final U.S. secret clearance Post Start is required.</b></p><br><br><br><p><b>Basic Qualifications (Required Skills/Experience):</b></p><br><br><ul><li><p>5+ years of C17 Maintenance experience</p><br><br></li><li><p>Current (or ability to obtain) US Security Clearance</p><br><br></li></ul><br><p><b>Preferred Qualifications (Desired Skills/Experience):</b></p><br><br><ul><li><p>Experience in structural, composite repair, and/or fuel cell maintenance</p><br><br></li></ul><br><p><span>This position offers relocation based on candidate eligibility.</span></p><br><br><br><p>Employer <span>is</span> willing to sponsor applicants for employment visa status</p><br><br><br><p>This requisition is for an international, locally hired position in Kuwait. Benefits and pay are determined at the local level and are not part of Boeing U.S. based payroll and will be commensurate with experience and qualifications and in accordance with applicable Kuwaiti law. Employment is subject to the candidate's ability to satisfy all Kuwaiti labor and immigration formalities.</p><br><br><br><br><p><b><b><b>Language Requirements:</b></b></b></p><br><br><br>Not Applicable<br><br><p><b>Education:</b></p><br><br>Not Applicable<br><br><p><b>Relocation:</b></p><br><br>This position offers relocation based on candidate eligibility.<br><br><p><b>Security Clearance:</b></p><br><br>This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required.<br><br><p><b>Visa Sponsorship:</b></p><br><br>Employer willing to sponsor applicants for employment visa status.<br><br><p><b>Contingent Upon Award Program</b></p><br><br>This position is not contingent upon program award<br><br><p><b>Shift:</b></p><br><br>Shift Worker (Kuwait)<br> </div>

<strong>Overview</strong> <br> <br> <p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p> <br> <strong>Responsibilities</strong> <br> <br> <p>The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities include maintenance and serviceability procedures for subsystem components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of airframes and power plants engineering principles, techniques, and methods in the maintainability of existing equipment and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</p> <p> </p> <p> <strong>Major Job Activities</strong> </p> <p> <strong>Description:</strong> </p> <p> </p> <p> Apply and provide a thorough working knowledge of airframes and power plant systems to include aircraft modification procedures and experience with specific airframe, hydraulic, engine, and propeller systems, systems integration, system/component failure analysis, inspection, repair, and testing of airframes and power plant systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems.</p> <p> </p> <p> Performance abilities include performance of maintenance and servicing related aircraft components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation and incorporates applicable technical directives and bulletins.</p> <p> Troubleshoots and/or repairs malfunctions in the aircraft airframes and power plants systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J MRC/MIMs, to include performing calibration procedures and required functional tests.</p> <p> </p> <p> Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs.</p> <p> </p> <p> Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components</p> <p> </p> <p> Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions.</p> <p> Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control.</p> <p> Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system.</p> <p> Performs applicable O and I level maintenance functions in support of In-Flight Refueling Systems and rebuild shop and Aircraft Tire &amp; Wheel rebuilding.</p> <p> Perform scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment, pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated airframes and power plants equipment systems.</p> <p> Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures.</p> <p> Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/</p> <p> Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures</p> <p> When necessary, perform other duties and supervisory functions, critical to the function of the program and to assure compliance with the Performance Work Statement (PWS).</p> <br> <strong>Qualifications</strong> <br> <br> <p> <strong>EDUCATION and/or EXPERIENCE:</strong> </p> <p>Graduation from a standard four (4) year high school or equivalent (GED)</p> <p> </p> <p>This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance.<br> </p> <p> </p> <p> <strong>Material &amp; Equipment Directly Used</strong> </p> <p> </p> <p>Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems.</p> <p> </p> <p><br></p>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.USAF equivalent position is Aircraft Mechanic Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Performs all daily launch/recovery duties in support of operational requirements.</li><li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li><li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li><li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li><li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li><li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li><li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li><li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li><li>Must be able to work with little-to-no supervision.</li><li>Performs all other duties as assigned as requested.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Mechanic maintenance experience required.</li><li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li><li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li><li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications</p><ul><li>Associate degree in a relevant career field.</li><li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Aircraft Mechanic Experience within the last 10 years.</li><li>MQ-9 Experience as an Aircraft Mechanic.</li><li>MQ-9 Aircraft Composite Repair / Replacement Experience.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The defense group at Leidos is seeking a Non-Intrusive Inspection System (NIIS) Field Service Technician, Journeyman in support of the IBD-SS program's CENTCOM and Horn of Africa areas of operations. UNLEASH YOUR POTENTIAL At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers' success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business Are you ready for your next career challenge? The Field Service Technician will perform maintenance, training, and work closely with military customers. This position desires an individual who has experience performing mechanical and electronics, on both the radiation and Backscatter technology systems as well as skills performing installs, de-installs, testing systems and components, and performing Preventive Maintenance actions on a variety of systems belonging to the Non-Intrusive Inspection Systems. The successful candidate may be assigned supervisor duties to manage the day-to-day operations of their area or operations and or other technicians. OCONUS travel will be required to other OCONUS locations. THE MISSION The Defense Group provides a diverse portfolio of systems, solutions, and services covering land, sea, air, space, and cyberspace for customers worldwide. Solutions for Defense include enterprise and mission IT, large-scale intelligence systems, command and control, geospatial and data analytics, cybersecurity, logistics, training, and intelligence analysis and operations support. Our team is solving the world's toughest security challenges for customers with "can't fail" missions.&nbsp;</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>WHAT SETS YOU APART:</p><ul><li>Must be capable of performing analyses of system operations</li><li>Must have knowledge of and experience in the operations of hardware systems and components</li><li>Must have experience in fault detection, isolation, and correction of hardware systems and individual components</li><li>Must be capable of routine system maintenance and analysis functions including hardware configurations; adding, removing, and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards</li><li>Performs sustainment and PMCS maintenance on the system and vehicle chassis</li><li>Performs site surveys to determine type and placement of systems</li><li>Installs and de-installs systems and their components and trains operators and end users</li><li>Updates databases, informs Lead of job status and any issues encountered</li><li>Tracks and updates work orders to include the replacement of parts component serial numbers removed and replaced</li><li>May travels via military/commercial conveyances to outlying areas</li><li>Skilled using hand tools, power tools, and electronics measuring and test equipment</li><li>Ability to perform minor maintenance on vehicles and generators such as changing oil and filter</li><li>Must have the ability to generate/produce data and reports</li><li>Interact and professionally exhibit customer service skills and be able to present a positive approach with customers and peers</li><li>Must be able to withstand physical demands of seasonal hot or cold temperatures and willing to live and operate in an austere environment</li><li>Must be willing to support up to an 84-hour Extended Work Week</li><li>Possesses a US passport that will not expire for at least 2 or more years and must have at least 4 consecutive blank pages for country visas</li><li>Must be capable of meeting standards of fitness for deployment to the SWA of Operations</li><li>Must be able to lift 50 lbs., climb ladders, and be able to work in a non-climate-controlled environment</li><li>Other duties as assigned</li><li>WHAT SETS YOU APART : BA/BS plus 5-8 + years relevant experience (12 years' experience in lieu of a degree)</li><li>Radiation Safety Certification Required</li><li>Security Clearance: US Secret security clearance required</li><li>YOU MIGHT ALSO HAVE</li><li>Relevant and recent experience supporting Force Protection systems is highly desirable</li><li>Experience with Radiation and Backscatter systems</li><li>Experience with other PM FPS Systems to include BETSS-C, Cerberus, Scout, IBD-K, and RDISS</li><li>Ability to train operators in the use and maintenance of NIIS systems</li><li>Experience utilizing COLTS and operating within the GCSS-A environment</li><li>Proficient in Microsoft Office, PowerPoint, and Excel</li><li>Import/Export (ITAR/EXIM) compliance experience</li><li>Experience in a rapid paced, time sensitive, high-quality environment</li><li>Strong written and verbal communication skills along with strong customer service</li><li>Ability to multi-task, prioritize commitments, and manage time effectively</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities Job Details / Position Summary The Aviation Support Equipment Technician diagnoses malfunctions repairs and maintains Support Equipment (SE); inspects and approves completed maintenance actions; troubleshoots discrepancies by studying drawings, wiring diagram schematics, Original Equipment Manufacturer (OEM) manuals, technical publications and historical maintenance actions. The Technician uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, and document maintenance actions. The Technician analyzes, diagnoses, and repairs SE using conventional and digital multi-meters, voltmeters, ohmmeters, oscilloscopes and hand tools. Diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical maintenance data sources. The Technician performs scheduled and unscheduled maintenance on SE by inspecting, testing and operating SE to determine equipment serviceability and proper operation. Services equipment with required fluids such as oil, water, coolant, hydraulic fluid, refrigerant and compressed air. The Technician also performs removal, disassembly, repair, cleaning, corrosion treatment, re-assembly and installation of malfunctioning CSE accessories and components, as well as stenciling and marking SE, storing, handling, labelling, using and disposing of hazardous materials and hazardous waste. The Technician prepares SE for preservation and mobility deployment. The Technician operates, cleans, inspects and services all assigned support equipment, to include towing vehicles, to include Bobtail Ford trucks, Tow Tractors (Tug), and U-30 aircraft tow vehicle. In addition to performing inspections and maintenance, the technician practices good housekeeping, Tool Control, Foreign Object Damage prevention, and safety awareness. Description: • Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs according to publication/technical instructions and technical directives on all required support equipment. Determines requirements for repairs, modifications, and part replacements. May be required to verify/inspect work performed by other technicians for which he/she is qualified to perform.• Reviews, interprets, and applies maintenance procedures in support of assigned maintenance actions. Applies practical knowledge of wiring schematics and the interpretation of technical data contained within those schematics and/or sources of maintenance data• Reads and interprets manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.• Performs “O”, “I” and authorized commercial repair of all CSE, Material Handling Equipment (MHE), and Palletized Systems Equipment (PSE) in accordance with the KAF 4790.2 and applicable maintenance manuals.• Performs scheduled, unscheduled, and other hourly or calendar inspections in accordance with the KAF 4790.2 and applicable publications.• Troubleshoots, repairs, reworks and maintains hydraulic, pneumatic, mechanical and electrical systems. Removes, adjusts, repairs and replaces/re-installs functional components and incorporates applicable technical directives and bulletins.• Ensures the accurate entry of data into the locally used computer database system to document maintenance actions, monitor maintenance trends, analyze equipment requirements, and maintain equipment records. • Uses Hazardous Materials such as chemical sealants, oil, hydraulic fluid, transmission fluid, etc. and performs proper handling and disposal of chemicals and petroleum products required during maintenance.• Uses illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and requisitions repair parts, materials, and consumable supplies through supply system.• Performs close tolerance adjustment, repair and rework of equipment in and out of shop area.• Services, inspects and tests aviation support equipment used for direct and indirect aircraft support.• Troubleshoots, inspects, services, tests and re-conditions storage batteries, to include lead-acid, gel and sealed type.• Performs Corrosion Control/Prevention, Preservation and de-preservation of Support Equipment (SE).• Performs general housekeeping and organization of workstation(s), shop(s), maintenance facility to provide a clean, safe, and FOD free environment.• Conducts off station maintenance when required.• When necessary, perform other duties and functions critical to the support of the program. Qualifications Education / Certifications: • High School Diploma • Must be able to obtain/maintain the following required certifications/qualifications: Applicable Support Equipment licensing: + “I” Level &amp; “O” Level Tire &amp; Wheel certification + Hydraulic Contamination certification + Collateral Duty Inspector (CDI) qualification + Corrosion Prevention and Control and Aircraft Paint qualification + “I” Level Battery Maintenance certification Experience: • Five years of hands-on aviation ground support equipment maintenance experience preferred. A combination of formal education, technical schools, and practical experience may be substituted. • Naval Aviation Maintenance Program (NAMP) 4790.2 or equivalent experience with Air Force Instruction 21-101 preferred. • Must have a working knowledge of first aid procedures to be used in an emergency. • Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures). Specific Requirements: This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance. • Must be United States (U.S.) citizen , be able to read, write, and understand the English language • Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration. • Must have a valid U.S. Driver’s License. • Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements. • Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc…) as required by local policies. • Must be willing and able to comply with all program functional requirements to include but not limited to: The performance of “I” Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp; MLG Tire re-building, MLG Brake repair/rebuilding, Battery maintenance support, and Oxygen Regulator testing/repair. • Must be willing and able to deploy off-site as required to support Kuwait Air Force operations. • Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required. • Must have the ability to communicate clearly, concisely and follow instructions when directed on assigned tasks. • Have a strong knowledge base of intermediate level maintenance business practices and procedures • Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions. • As a Subject Matter Expert, must be willing to perform in-depth research, troubleshoot, and perform “O” level, “I” level, and commercial level maintenance functions on all applicable SE systems and components necessary to return equipment to a Ready for Issue (RFI) status; this includes determining material requirements, researching part numbers, ordering, tracking, and receiving materials as required to facilitate SE inspections/repairs. • Must be able to communicate directly with the customer, pilots, air crew members, management, and maintenance personnel to gather and relay pertinent data/information necessary to ensure equipment is available to support aircraft launches and maintenance. • Must have an in-depth knowledge of applicable technical orders/job guides/publications—read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications. • Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations. • Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations. • Must perform as a team member, contributing to the success of the KC-130J / Common Support Equipment (CSE) Program. • Must be willing and able to work with hazardous materials and conduct specialty on-the-job training. • Must be dependable and timely in managing assigned tasks, perform consistent quality maintenance. • Must have a proven ability to work independently with minimal direction. Material &amp; Equipment Directly Used Uses digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, diagnosing software, circuit card testers, transistor testers, and hand tools to analyze, diagnose, and repair applicable Support Equipment. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds What We Bring: At V2X we strive to be market competitive in our total reward offerings. Employee benefits include the following: • Healthcare coverage • Life insurance, AD&amp;D, and disability benefits • Retirement plan • Wellness programs • Paid time off, including holidays and leave of absences • Eligible Tuition Reimbursement • Learning and Development resources • Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for skilled professionals to join our team. The hiring categories include: SEO Specialist, Shopify Developer, Odoo Developer, Mobile Technician, Home Appliance Technician, and Shopify Developer.</p></div></section>

<p>Position: Dental Laboratory Technician</p><p>Vacancies: 15</p><p>Prometric: Not Required</p><p>Gender: Male &amp; Female</p><p>Accommodation: Provided for Female Candidates Only</p><p>Processing Time: Approximately 60 Days</p><p><strong>Desired Candidate Profile</strong></p><p>NA</p>

<p>Residence Co. for Building Construction is looking for an experienced Tile &amp; Flooring Technician to join its team in Kuwait.</p><p><strong>Requirements:</strong></p><ul><li>Experience in installing ceramic tiles, porcelain, and marble.</li><li>Skilled in accurate cutting, installation, alignment, and finishing.</li><li>Transferable residency in Kuwait.</li></ul><p><strong>Benefits:</strong></p><p>&nbsp;</p><ul><li>&nbsp;Competitive monthly salary.</li><li>Performance, quality, and productivity bonuses.</li></ul>

<p>Urgent Hiring - Technician operator - Kuwait Qty : 1 Gender : Male Salary : 200 KD + Free accommodation More details : Technician For Operation and repair of Automatic Lines Paper Tissue Production Line Terms and conditions of employment: Employment period: (2) Years and renewable. Duty and working hours: 10 Hours per day/ 6 days per week. Accommodation Free / provided by the company. Medical and facilities: covered as mentioned in the Labour Law contract. Annual leave : As per labour law contract Kuwait. Entry visa Article 18 to be secured by the company</p><p><strong>Desired Candidate Profile</strong></p><p>Technician For Operation and repair of Automatic Lines Paper Tissue Production Line</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job description</p><p>Dental X-Ray Technician. Diploma in Radiology. 2 - 4 Years experience.</p><p><br></p><p>Required Candidate profile</p><p><br></p><p>Dental X Ray Technician. Diploma in Radiology - 2 to 4 Years experience.</p><p><br></p><p>Perks and benefits</p><p><br></p><p><span >Role: Radiologist Technician</span></p><p>Industry Type: Medical Services / Hospital (Diagnostics)</p><p>Department: Healthcare &amp; Life Sciences</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Imaging &amp; Diagnostics</p><p>Education</p><p>UG: B.Sc in Radiology and Medical Imaging, Diploma in Medical</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Dental X Ray Technician. Diploma in Radiology - 2 to 4 Years experience.</p><p></p></section>

<p>Role: Radiologist Technician</p><p>Industry Type: Medical Services / Hospital</p><p>Department: Healthcare &amp; Life Sciences</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Imaging &amp; Diagnostics</p><p>Education</p><p>UG: B.Sc in Radiology and Medical Imaging</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p><p>• Conduct the training and examination on all NDT methods to certify and to re- certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p><p>• Determine test method and prepare fluids and parts for nondestructive inspection.</p><p>• Interpret nondestructive inspection test results and provide information about defects to repair center.</p><p>• Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p><p>• Establish radiation areas for radiographic operations.</p><p>• Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p><p>• Perform nondestructive inspection on structures, components, and systems.</p><p>• Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p><p>• Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p><p>• Operate, maintain, and inspect nondestructive equipment.</p><p>• Perform operator maintenance and service inspections on shop equipment and tools.</p><p>• Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p><p>• Perform silver recovery functions.</p><p>• Handle and dispose of hazardous waste and materials</p><p>• Perform other qualified duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li><li>Three (3) years experience as a Non Destructive Inspection (NDI).</li><li>A Valid US Passport is Required for deployment to Kuwait. The Passport must have 3 years remaining before expiring, and 6 Blank pages available at the time of hire and deployment.</li><li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/ DIDC Training).</li><li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li><li>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li><li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li><li>Capable of assuming technical responsibility for the NDT facility and staff.</li><li>Capable of selecting the method and technique for a specific inspection.</li><li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li><li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li><li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li><li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li><li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li><li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li><li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li><li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li><li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li><li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li><li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li><li>Ability to provide technical support to structural/mechanical engineers and customers.</li><li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</li><li>Must be able to climb stairs, ramps, ladders, and work stands</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications</li><li>Will handle dirty parts and lubricants</li><li>Will be required to wear proper Personal Protective Equipment (PPE)</li><li>Must be able to pass a Respirator Physical and Fit Test qualification</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds</li><li>May work in maintenance shop or outside</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty</li><li>May be exposed to extreme noise from operating equipment</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li></ul><p></p></section>

<p>We are looking for a skilled Maintenance Technician (Electronics) to join our team in a factory environment. The candidate will be responsible for troubleshooting.Repair &amp; Maintaining electronic PCBs.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma Electronics or a related field Experience in factory maintenance Strong troubleshooting skills for PCBs Experience operating and maintaining industrial machines &amp; Control Systems.</p>

<p>A technician in a Kuwait amusement mall maintains rides and games, ensuring visitor safety through daily inspections. Key duties include repairing mechanical or arcade systems, testing electrical components, and logging maintenance records.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma or ITI certification in Electrical, Electronics, or Mechanical Engineering.</li><li>Technical experience in amusement parks, arcades, or mall entertainment centers.</li></ul>

<p><h4>Job description</h4> <p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Conduct the training and examination on all NDT methods to certify and to re-certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.</p> <p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p> <p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p> <p>Establish radiation areas for radiographic operations.</p> <p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p> <p>Perform nondestructive inspection on structures, components, and systems.</p> <p>Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p> <p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p> <p>Operate, maintain, and inspect nondestructive equipment.</p> <p>Perform operator maintenance and service inspections on shop equipment and tools.</p> <p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p> <p>Perform silver recovery functions.</p> <p>Handle and dispose of hazardous waste and materials.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum requirements</h4> <p>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</p> <p>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</p> <p>Three (3) years’ experience as a Non Destructive Inspection (NDI).</p> <p>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/DIDC Training).</p> <h4>Security clearance requirements</h4> <p>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a clearance and for facility credentials/authorization to work at this facility.</p> <h4>Additional and preferred qualifications</h4> <ul> <li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li> <li>Capable of assuming technical responsibility for the NDT facility and staff.</li> <li>Capable of selecting the method and technique for a specific inspection.</li> <li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li> <li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li> <li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<p><b>Job Title:</b> Senior Generator Technician - TS/SCI Job Category: Engineering and Technical Support Time Type: Full time Minimum Clearance Required to Start: TS/SCI Employee Type: Regular-Long Term Assignment Percentage of Travel Required: Up to 25% Type of Travel: Local</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelors Degree plus 3 years experience or High School Diploma or equivalent and a power generation certification with a 10 years of experience in power generation operations; or 12 years Military experience in power generation operations. Technical understanding of power generation operation and maintenance, certification from power generation manufacturer preferred. Knowledge of document and report writing. Knowledge of safe work practices and Personal Protective Equipment (PPE). Knowledge of lockout and tag out procedures. Ability to effectively communicate, speak and write. US Citizen with an active TS/SCI clearance is required.</p>

<p>Residence Co. for Building Construction is hiring for the following positions:</p><p>&nbsp;</p><p>1. Tile Installation Technician</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><p>Requirements:</p><p>&nbsp;</p><p>Minimum 2 years of hands-on experience in tile installation.</p><p>&nbsp;</p><p>Transferable residency in Kuwait.</p><p>&nbsp;</p><p>Willing to work 6 days per week.</p><p>&nbsp;</p><p>&nbsp;</p><p>Benefits:</p><p>&nbsp;</p><p>250 KWD monthly salary.</p><p>&nbsp;</p><p>Performance bonus.</p><p>&nbsp;</p><p>Company-provided accommodation.</p><p>&nbsp;</p><p>Company-provided transportation.</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><p>---</p><p>&nbsp;</p><p>2. Tile Installation Helper</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><p>Requirements:</p><p>&nbsp;</p><p>Transferable residency in Kuwait.</p><p>&nbsp;</p><p>Willing to work 6 days per week.</p><p>&nbsp;</p><p>&nbsp;</p><p>Benefits:</p><p>&nbsp;</p><p>130 KWD monthly salary.</p><p>&nbsp;</p><p>Performance bonus.</p><p>&nbsp;</p><p>Company-provided accommodation.</p><p>&nbsp;</p><p>Company-provided transportation.</p><p>&nbsp;</p><p>&nbsp;</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are hiring an experienced MPD Technician for a long-term oil &amp; gas drilling project in Kuwait. The role involves maintenance and troubleshooting of MPD systems, smart choke manifolds, PLC controls, and hydraulic equipment.</p><br><br> <ul> <li>Maintain and troubleshoot MPD control systems.</li> <li>Operate and troubleshoot smart choke manifolds.</li> <li>Calibrate pressure transducers and Coriolis flow meters.</li> <li>Troubleshoot PLC-based control panels and electronic choke operators.</li> <li>Maintain hydraulic circuits, valves, and actuators.</li> <li>Support MPD operations and equipment reliability.</li> </ul> <br> <ul> <li>Experience as an MPD Technician in drilling operations.</li> <li>Strong knowledge of MPD systems and oilfield operations.</li> <li>Hands-on experience with PLCs, smart chokes, instrumentation, and hydraulics.</li> <li>Experience in troubleshooting and maintenance of MPD equipment.</li> <li>Willing to work in Kuwait on a long-term contract.</li> </ul> </div>

<p>The Mechanical Technician Responsibilities:</p><ul><li>Inspect, repair, maintain, and pressure test Liner Hanger systems and related equipment.</li><li>Disassemble, clean, assemble, and refurbish Liner Hanger tools according to OEM procedures.</li><li>Diagnose equipment failures and perform troubleshooting and corrective maintenance.</li><li>Conduct dimensional inspections, function testing, and quality checks to ensure equipment readiness.</li><li>Complete maintenance records, work orders, and inspection documentation accurately.</li><li>Ensure compliance with HSE, quality, and operational standards.</li><li>Safely operate workshop machinery, lifting equipment, and testing equipment.</li><li>Provide technical support and guidance to junior technicians when required.</li></ul><p>Skills:</p><ul><li>Liner Hanger equipment maintenance and repair and wellbore cleaning WBC and Cementing Head</li><li>Mechanical troubleshooting and failure analysis</li><li>Pressure testing and function testing</li><li>Assembly and disassembly of downhole tools</li><li>Precision measuring and quality inspection</li><li>Reading technical drawings and maintenance procedures</li><li>Root cause analysis and problem-solving</li><li>Strong safety awareness and teamwork</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Diploma in Engineering or related discipline.</p><p>4 6 years of experience in Liner Hanger equipment repair and maintenance within the Oil &amp; Gas industry.</p><p>Hands-on experience with hydraulic and mechanical Liner Hanger systems, running tools, packers, and related downhole equipment.</p><p>Knowledge of pressure testing, dimensional inspection, and equipment certification processes.</p><p>Forklift, crane, or lifting equipment certification preferred.</p><p>Ability to work in a workshop and field support environment.</p><p>Willingness to travel up to 10% as required.</p>