Electromechanical Engineer Jobs

<p>The Mechanical Metrology Engineer is the resident expert in his field and, in conjunction with the Kuwait Senior Engineer, provides engineering/consultant services to the GOK. Conducts research and studies new equipment to ensure that the latest developments in technique and equipment are included in metrology planning for future acquisition. Assists in the development and implementation of a Metrology QA Program as required. Assists in obtaining and maintaining laboratory QA accreditation. Assesses requirements and develops new measurement techniques and approaches related to mechanical, electro- mechanical, optical, electro-optical, chemical, and electro-chemical calibration methodology. Also performs analysis and evaluation of equipment test and performance requirements, and prescribes calibration approaches, test equipment and servicing requirements necessary to assure measurement traceability. Directs, conducts and evaluates the development of calibration procedures for assigned equipment categories. Conducts liaison and coordinates with technical societies and engineering facilities of other countries to remain current with the state-of-the-art and new measurement techniques. Responsible for laboratory facility and related environmental control development, operation and maintenance. Coordinates with civilian contractor and military civil engineering organizations on all projects affecting metrology facilities to ensure timely completion. Acts as consultant to GOK military and ministries on matters pertaining to metrology facilities and environmental requirements. Conducts liaison and coordination with technical societies and engineering facilities of other countries to remain current with state-of-the-art for metrology facilities and environmental control systems. Works with the Electrical Engineer on all matters associated with Power Production and Facilities. It is anticipated that Engineers will be assigned as these job descriptions state and other related specific tasking details and priorities will be determined and set by the Commander, KAFMB and communicated to the Contractor lead.</p><p><strong>Desired Candidate Profile</strong></p><p>An Associate s degree in mechanical engineering, physics or a related technical field from an accredited college or university and twelve (12) years of work experience operating, maintaining, troubleshooting, repairing, calibrating electronic precision measurement equipment and calibration laboratory reference standards. Includes qualification requirements D and E. OR; Completion of a U.S. military precision measurement and calibration school and twelve (12) years of work experience in the metrology and calibration field. Completion of a precision measurement and calibration school at an accredited school, or within a specialized calibration firm, and twelve (12) years of experience operating, maintaining, troubleshooting, repairing and calibrating physical/dimensional precision measurement equipment and calibration laboratory reference standards. I Five (5) years of experience in technical oversight and training responsibilities of calibration and repair technicians with three (3) years within the last five (5) years. Experience in researching requirements and maintaining calibration laboratory facility and related environmental control systems. Must have an Active Secret US Government Clearance. US Citizenship is required to obtain a Secret Clearance.</p>

<p>The Mechanical Metrology Engineer is the resident expert in his field and, in conjunction with the Kuwait Senior Engineer, provides engineering/consultant services to the GOK. Conducts research and studies new equipment to ensure that the latest developments in technique and equipment are included in metrology planning for future acquisition. Assists in the development and implementation of a Metrology QA Program as required. Assists in obtaining and maintaining laboratory QA accreditation. Assesses requirements and develops new measurement techniques and approaches related to mechanical, electro- mechanical, optical, electro-optical, chemical, and electro-chemical calibration methodology. Also performs analysis and evaluation of equipment test and performance requirements, and prescribes calibration approaches, test equipment and servicing requirements necessary to assure measurement traceability. Directs, conducts and evaluates the development of calibration procedures for assigned equipment categories. Conducts liaison and coordinates with technical societies and engineering facilities of other countries to remain current with the state-of-the-art and new measurement techniques. Responsible for laboratory facility and related environmental control development, operation and maintenance. Coordinates with civilian contractor and military civil engineering organizations on all projects affecting metrology facilities to ensure timely completion. Acts as consultant to GOK military and ministries on matters pertaining to metrology facilities and environmental requirements. Conducts liaison and coordination with technical societies and engineering facilities of other countries to remain current with state-of-the-art for metrology facilities and environmental control systems. Works with the Electrical Engineer on all matters associated with Power Production and Facilities. It is anticipated that Engineers will be assigned as these job descriptions state and other related specific tasking details and priorities will be determined and set by the Commander, KAFMB and communicated to the Contractor lead.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>An Associate's degree in mechanical engineering, physics or a related technical field from an accredited college or university and twelve (12) years of work experience operating, maintaining, troubleshooting, repairing, calibrating electronic precision measurement equipment and calibration laboratory reference standards. Includes qualification requirements D and E.</li><li>OR; Completion of a U.S. military precision measurement and calibration school and twelve (12) years of work experience in the metrology and calibration field.</li><li>Completion of a precision measurement and calibration school at an accredited school, or within a specialized calibration firm, and twelve (12) years of experience operating, maintaining, troubleshooting, repairing and calibrating physical/dimensional precision measurement equipment and calibration laboratory reference standards.</li><li>I Five (5) years of experience in technical oversight and training responsibilities of calibration and repair technicians with three (3) years within the last five (5) years.</li><li>Experience in researching requirements and maintaining calibration laboratory facility and related environmental control systems.</li><li>Must have an Active Secret US Government Clearance.</li><li>US Citizenship is required to obtain a Secret Clearance.</li></ul>

<p>Would you like the opportunity to collaborate on a wide range of technical products? Do you enjoy creating innovative and strategic solutions to solve complex problems? Join our cutting-edge Drilling Services team At Baker Hughes our purpose is clear. We take energy forward making it safer, cleaner and more efficient for people and the planet. Our team partners with the business to effectively enable and sustain change to improve our performance. Partner with the best As an Electro-Mechanic Master / General, you will troubleshoot, test, assemble, disassemble and perform the visual inspection of mechanical assemblies. Whilst assisting in repairing and modifying non-conforming equipment, you will perform all test with minimal instruction. As an Electro-Mechanic Master, you will be responsible for:</p><ul><li>Reviewing procedures for assembly, disassembly, and test verification accuracy</li><li>Configuring test stations and systems</li><li>Analysing and interpreting data from environmental tests, and troubleshooting equipment problems</li><li>Assisting in the set-up of experiments and the recordings of experimental data in collaboration with Engineering and Reliability groups</li><li>Testing and evaluating the performance and, if required, repairing general purpose test equipment</li><li>Performing quality assurance activities required by manufacturing or engineering specifications and ISO requirements to ensure compliance.</li><li>Working in compliance with HS&amp;E policies and procedures</li></ul><p>Fuel your passion To be successful in this role you will:</p><ul><li>Have a 3-year technical diploma or associate degree in the electrical/Mechanical field or higher</li><li>Have at least 5 - 10 years of related experience in electro-mechanical function in oil and Gas industry/domain</li><li>High level of knowledge in the maintenance of electronics</li><li>Have advanced skills in soldering and assembling of electro-mechanical devices</li><li>Have the ability to read and interpret blueprints, wiring diagrams, assembly prints and parts lists</li><li>Demonstrate the ability to identify problems and be able to develop solutions</li><li>Have previous experience with Baker Hughes (preferred)</li><li>Display an advanced mechanical aptitude and experience with general hand tools and precision measuring equipment.</li></ul><p>Work in a way that works for you We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns: This role is a shift-based working pattern. Working with us Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other. Working for you Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:</p><ul><li>Contemporary work-life balance policies and wellbeing activities</li><li>Comprehensive private medical care options</li><li>Safety net of life insurance and disability programs</li><li><br></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Have a 3-year technical diploma or associate degree in the electrical/Mechanical field or higher</li><li>Have at least 5 - 10 years of related experience in electro-mechanical function in oil and Gas industry/domain</li><li>High level of knowledge in the maintenance of electronics</li><li>Have advanced skills in soldering and assembling of electro-mechanical devices</li><li>Have the ability to read and interpret blueprints, wiring diagrams, assembly prints and parts lists</li><li>Demonstrate the ability to identify problems and be able to develop solutions</li><li>Have previous experience with Baker Hughes (preferred)</li><li>Display an advanced mechanical aptitude and experience with general hand tools and precision measuring equipment.</li></ul>

Technician <br><br> Job Id :100195398<br><br>Jobboard subscription<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>???? WE ARE HIRING | KUWAIT ????????<br><br>We are looking for experienced engineering and technical professionals to join our Hygiene Products Manufacturing Team in Kuwait.<br><br>???? ENGINEERING POSITIONS<br><br> Production Engineer Mechanical Engineer Electrical Engineer<br><br>???? TECHNICIAN POSITIONS<br><br> Mechanical Technician Electrical Technician<br><br>Requirements<br><br>✅ 3–5+ years of experience in manufacturing<br><br>✅ Hands-on experience with production machinery<br><br>✅ Strong troubleshooting and maintenance skills<br><br>✅ Preventive & breakdown maintenance experience<br><br>✅ Engineering/technical qualification relevant to the position<br><br>⭐ Experience in tissue converting, paper converting, packaging, FMCG or similar manufacturing machinery will be highly preferred.<br><br>???? Candidates from Kuwait and overseas are welcome to apply.<br><br>???? Send Your CV<br><br>???? Whats App: +965 97256555<br><br>???? recruit.k81@gmail.com<br><br>Please mention the position applied for when sending your cv<br><br>Basic Details<br><br>Qualification<br><br>Posted : Today<br><br>Job Type : Full-Time<br><br>Jobboard subscription<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : +965 97256555<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : Not-Mentioned

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Hiring Engineers – Kuwait</p><p>A leading contracting company in Kuwait is currently seeking qualified candidates for the following positions:</p><p><b>1. HVAC Engineer</b></p><p><b>Requirements:</b></p><p>Bachelor's Degree in Mechanical Engineering.</p><p><b>5–7 years</b> of experience in HVAC systems.</p><p>Experience in construction and maintenance projects.</p><p>Strong technical and communication skills.</p><p><b>2. Civil Engineer</b></p><p><b>Requirements:</b></p><p>Bachelor's Degree in Civil Engineering.</p><p><b>10 years or more</b> of relevant experience.</p><p>Experience in construction and infrastructure projects.</p><p>Strong leadership, site management, and project coordination skills.</p><p>Preferred Qualifications:</p><p>Transferable residency in Kuwait.</p><p>Membership in the Kuwait Society of Engineers (preferred).</p><p>Immediate joining is an advantage.</p><p>Interested candidates are invited to submit their updated CV through Bayt.com.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Required Skills</p><ul><li>Bachelor's Degree in the relevant engineering discipline.</li><li>Relevant work experience as per the job requirements.</li><li>Ability to read and interpret engineering drawings and specifications.</li><li>Familiarity with engineering standards and technical specifications.</li><li>Proficiency in Microsoft Office applications.</li><li>Strong communication and teamwork skills.</li><li>Ability to work under pressure and meet project deadlines.</li><li>Strong problem-solving and decision-making skills.</li><li>Transferable Residency in Kuwait (Article 18).</li><li>Valid Membership of the Kuwait Society of Engineers.</li><li>Immediate joiners are preferred.</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>QA/QC Engineers &amp; Inspectors – Oil &amp; Gas</p><p><br></p><p><b>Disciplines: Mechanical / Civil / Electrical / Instrumentation</b></p><p><br></p><p>We are seeking experienced <b>QA/QC Engineers and Inspectors</b> for Oil &amp; Gas projects across Mechanical, Civil, Electrical, and Instrumentation disciplines. The successful candidates will be responsible for ensuring all construction, installation, testing, and commissioning activities comply with project specifications, applicable codes, standards, and client quality requirements.</p><p><br></p><p><b>Key Responsibilities:</b></p><ul><li>Perform inspections and quality control activities during construction and installation phases.</li><li>Review and implement Inspection &amp; Test Plans (ITPs), Method Statements, and Quality Procedures.</li><li>Conduct material receiving, in-process, and final inspections.</li><li>Verify compliance with project specifications, drawings, international standards, and client requirements.</li><li>Prepare inspection reports, NCRs, punch lists, and quality documentation.</li><li>Coordinate with construction teams, subcontractors, and client representatives to resolve quality issues.</li><li>Witness testing, calibration, commissioning, and acceptance activities as applicable.</li></ul><p><br></p><p><b>Requirements:</b></p><ul><li>Bachelor's Degree/Diploma in relevant Engineering discipline.</li><li>Minimum 5+ years of QA/QC experience in Oil &amp; Gas, Petrochemical, Refinery, or EPC projects.</li><li>Strong knowledge of relevant international codes and standards.</li><li>Experience in inspection, testing, documentation, and quality management systems.</li><li>Relevant certifications and client approvals are preferred.</li><li><br></li></ul><p><b>Positions Available:</b></p><ul><li>QA/QC Mechanical Engineer / Inspector</li><li>QA/QC Civil Engineer / Inspector</li><li>QA/QC Electrical Engineer / Inspector</li><li>QA/QC Instrumentation Engineer / Inspector</li></ul><p><br></p><p>Candidates with GCC/Oil &amp; Gas project experience will be given preference.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Requirements:</b></p><ul><li>Bachelor's Degree/Diploma in relevant Engineering discipline.</li><li>Minimum 5+ years of QA/QC experience in Oil &amp; Gas, Petrochemical, Refinery, or EPC projects.</li><li>Strong knowledge of relevant international codes and standards.</li><li>Experience in inspection, testing, documentation, and quality management systems.</li><li>Relevant certifications and client approvals are preferred.</li><li><br></li></ul><p><b>Positions Available:</b></p><ul><li>QA/QC Mechanical Engineer / Inspector</li><li>QA/QC Civil Engineer / Inspector</li><li>QA/QC Electrical Engineer / Inspector</li><li>QA/QC Instrumentation Engineer / Inspector</li></ul><p><br></p><p>Candidates with GCC/Oil &amp; Gas project experience will be given preference.</p></div>

<p>We are seeking a motivated and knowledgeable Mechanical Sales Engineer to join our dynamic sales/BD team. The ideal candidate will leverage their engineering expertise to promote and sell mechanical products and solutions to clients (Petrochemical &amp; Oil refineries), ensuring that our customers receive the best service and support. The Mechanical Sales Engineer will work closely with clients to understand their needs and requirements, develop proposals, and ultimately drive sales growth.</p><p>Key Responsibilities</p><ul><li>Identify and develop new business opportunities across industries such as Oil &amp; Gas, Manufacturing, Construction, and Automotive.</li><li>Build and maintain strong relationships with existing and prospective clients.</li><li>Conduct technical presentations and recommend suitable mechanical solutions based on customer requirements.</li><li>Collaborate with the engineering team to develop customized solutions and prepare technical proposals and quotations.</li><li>Develop and implement sales strategies to achieve revenue targets and expand market presence.</li><li>Conduct market research to identify industry trends, competitor activities, and new business opportunities.</li><li>Manage the complete sales cycle from lead generation to project completion, coordinating with engineering, production, and logistics teams.</li><li>Maintain accurate sales records and prepare regular sales reports and forecasts for management.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelors or master s degree in Mechanical Engineering OR Freshers</li><li>Proven experience as a Sales Engineer or in a similar technical sales role, preferably within the mechanical engineering or manufacturing industry. Freshers are also welcome to apply.</li><li>Strong technical knowledge of mechanical systems, products, and applications.</li><li>Excellent communication, negotiation, and interpersonal skills.</li><li>Ability to work independently and as part of a team.</li><li>Willingness to travel as required to meet clients and attend trade shows or industry events.</li></ul>

<p>Open Positions: Shop Drawings &amp; Quantity Surveying Foreman / Supervisor, Plaster Mason (Manual &amp; Machine), Ceramic &amp; Stone Tiler, Painter, Gypsum Board Technician, Stone Mechanical Fixer.</p><p><strong>Desired Candidate Profile</strong></p><p>Physically fit, hardworking, and team-oriented Draftsman &amp; Foreman candidates will be interviewed via Zoom or Google Meet.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description<br></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Mechanical Engineer</b> in <b>Kuwait</b>. Our client is a reputed organization in the <b>Power Generation</b> sector seeking skilled and motivated professionals. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Maintain and troubleshoot mechanical systems in a large-scale power plant.<br></li><li>Perform preventive and predictive maintenance on plant equipment.<br></li><li>Inspect turbines, pumps, compressors, boilers, and auxiliary systems.<br></li><li>Coordinate shutdown and maintenance activities.<br></li><li>Ensure compliance with plant safety and maintenance standards.<br></li><li>Analyse equipment failures and recommend corrective actions.<br></li><li>Prepare maintenance reports and technical documentation.<br></li><li>Support continuous improvement initiatives for plant reliability.<br></li></ul>Required Skills<br><ul><li>Power Plant Mechanical Maintenance – Experience maintaining large-scale power plant equipment.<br></li><li>Rotating Equipment – Expertise in turbines, pumps, compressors, and motors.<br></li><li>Preventive Maintenance – Planning and executing maintenance schedules.<br></li><li>Troubleshooting – Root cause analysis of mechanical failures.<br></li><li>Safety Compliance – Knowledge of industrial safety practices and standards.<br></li></ul>Preferred Skills<br><ul><li>SAP PM or CMMS knowledge.<br></li><li>Shutdown maintenance planning.<br></li><li>Leadership and team coordination.<br></li></ul>Work Experience Requirements<br><p>Candidates should possess a minimum of <b>10 years of experience</b> in mechanical maintenance within large-scale power plants. Experience handling critical plant equipment and maintenance planning is essential.<br></p><br>Education<br><ul><li><b>Minimum:</b> B.E. Mechanical Engineering<br></li><li><b>Preferred:</b> M.E. Mechanical Engineering<br></li><li><b>Additional Certifications:</b> Power Plant Maintenance, NEBOSH or equivalent (preferred)<br></li></ul>Contact Number - 9786888866<br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>COMBINED GENERAL URGENT REQUIREMENT KUWAIT LONG-TERM OIL &amp; GAS PROJECT</p><p>Job Category: Oil &amp; Gas Construction / EPC Project</p><p>INTERVIEW MODE: ONLINE INTERVIEW</p><p><br></p><p>EXPERIENCE REQUIRED</p><p>Minimum: 8 Years</p><p>Maximum: 10 Years</p><p>Key Highlights for Poster:</p><ul><li>510+ Years Oil &amp; Gas Experience Required</li><li>Kuwait Society of Engineering Approval (Engineers)</li><li>Oil Company Approval Preferred</li><li>CSWIP / NACE / HSE Certifications Required</li><li>Accommodation Provided (Selected Categories)</li></ul><p>Interview Mode: Online Interview</p><p>Education Section:</p><p>QA/QC Engineer (Mechanical)</p><ul><li>Ensure project quality standards and specifications are followed</li><li>Review drawings, procedures, ITPs, and inspection documents</li><li>Conduct inspections for mechanical works, piping, equipment installation</li><li>Prepare QA/QC reports and coordinate with client inspectors</li></ul><p>Civil Site Engineer</p><ul><li>Supervise civil construction activities at site</li><li>Monitor concrete works, foundations, structures, and site execution</li><li>Ensure work follows drawings, specifications, and safety standards</li><li>Coordinate with contractors and project teams</li></ul><p>Mechanical Site Engineer</p><ul><li>Supervise mechanical installation activities</li><li>Monitor piping, equipment erection, and mechanical works</li><li>Ensure compliance with engineering standards and project requirements</li><li>Coordinate inspections and site progress</li></ul><p>Electrical Site Engineer</p><ul><li>Supervise electrical installation works</li><li>Ensure proper execution of electrical systems and equipment</li><li>Review drawings and conduct inspections</li><li>Coordinate testing and commissioning activities</li></ul><p>HSE / Safety Engineer</p><ul><li>Implement HSE policies and safety procedures</li><li>Conduct safety inspections, audits, and toolbox talks</li><li>Monitor site safety compliance</li><li>Prepare safety reports and incident investigation.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor of Engineering (B.E)</p><p></p></section>

<p>Greetings from MEIL!!! We have Openings for #Engineer construction piping I #Kuwait (KOC) Qualification : B tech- #Mechanical Industry : #Oil &amp; Gas exp #KOC Approved added advantage Experience : Min 10+ years (8years in Oil&amp;Gas) Job Description : Should have experience in EPC Companies Oil &amp; Gas refinery projects. Execute piping construction activities for oil &amp; gas, refinery, petrochemical, LNG, and EPC projects. Supervise piping fabrication, erection, installation, and testing activities in accordance with approved drawings, specifications, and project procedures. Review P&amp;IDs, piping isometrics, GA drawings, plot plans, and piping layouts before execution. Coordinate with engineering, civil, mechanical, electrical, instrumentation, QA/QC, planning, and HSE teams to ensure seamless project execution. Coordinate NDT activities, weld repairs, and inspection clearance with QA/QC teams. Ensure completion of hydrotesting, pneumatic testing, flushing, air blowing, chemical cleaning, and reinstatement activities. Location : Kuwait If your Interested and Suitable Candidates for this position send your updated cv along with below details to EMAIL_ADDRESS . Total Exp: Relevant Exp : Qualification : DOB : Age : Current Company : Current location : Native : Current CTC : Expected CTC : Notice Period : Willing to relocate for Kuwait location. Reason for job change: Passport Validity : Note 1 : Mandatory to have min 10 years all previous companies experience letters</p><p><strong>Desired Candidate Profile</strong></p><p>Qualification : B tech- #Mechanical Industry : #Oil &amp; Gas exp #KOC Approved added advantage Experience : Min 10+ years (8years in Oil&amp;Gas)</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a highly skilled Senior HVAC Engineer to join our dynamic team in Kuwait, where you will play a pivotal role in delivering innovative HVAC solutions for diverse construction projects. This position is ideal for a seasoned professional who is eager to lead and influence the technical direction of our projects while collaborating with various stakeholders. Your expertise will not only contribute to the successful execution of projects but also enhance our team's reputation for excellence in the industry.</p><p>As a Senior HVAC Engineer, you will have the opportunity to mentor junior engineers and foster a culture of learning and development within the team. We believe in investing in our employees' growth, which is why we offer continuous training programs and workshops that will help you stay ahead of industry trends and technologies. This role is not just about managing projects; it’s about shaping the future of our engineering practices and ensuring that our solutions are sustainable and efficient.</p><p>In this strategic position, you will collaborate closely with project managers, architects, and other engineering disciplines to ensure that all HVAC systems are designed and implemented to meet the highest standards of quality and performance. Your leadership will drive cross-functional initiatives that align with our business vision, ultimately contributing to the successful completion of projects that exceed client expectations. Join us and take the next step in your career, where your contributions will have a lasting impact on the industry.</p><ol><li><b>Responsibilities:</b>Lead the design and implementation of HVAC systems for various construction projects, ensuring compliance with local codes and standards while utilizing advanced design software to optimize system performance.</li><li>Conduct thorough analysis and calculations to determine the heating and cooling loads for buildings, applying energy-efficient practices that align with sustainability goals and client requirements.</li><li>Oversee the installation of HVAC systems on-site, coordinating with contractors and subcontractors to ensure adherence to design specifications and project timelines.</li><li>Review and approve technical submittals, shop drawings, and equipment selections to ensure that they meet project specifications and quality standards.</li><li>Provide technical support and guidance to junior engineers and other team members, fostering a collaborative environment that encourages knowledge sharing and professional development.</li><li>Monitor project progress and budgets, implementing corrective actions as necessary to ensure projects are delivered on time and within financial constraints.</li><li>Conduct regular site inspections and quality control checks to identify potential issues and ensure that HVAC installations meet design and performance criteria.</li><li>Collaborate with other engineering disciplines to integrate HVAC systems with electrical, plumbing, and structural components, ensuring seamless project execution.</li><li>Stay updated on industry advancements and emerging technologies in HVAC systems, incorporating innovative solutions into project designs to enhance efficiency and performance.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Proficient in HVAC design software such as AutoCAD and Revit, enabling precise and efficient system designs.</li><li>Strong knowledge of building codes and standards related to HVAC systems, ensuring compliance and safety in all projects.</li><li>Excellent analytical skills to perform load calculations and energy modeling for various building types.</li><li>Effective project management abilities, capable of leading teams and managing multiple projects simultaneously.</li><li>Outstanding communication skills, facilitating collaboration with stakeholders and team members across various disciplines.</li><li>Experience with sustainable design practices and technologies, promoting energy efficiency and environmental responsibility.</li><li>Ability to mentor and develop junior engineers, fostering a culture of continuous improvement and professional growth within the team.</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Supervise and monitor all mechanical construction activities including piping fabrication, installation, pipeline laying, hydro-testing, and pre-commissioning.</p><p>Ensure proper execution of piping and pipeline works as per approved drawings, specifications, and project procedures.</p><p>Coordinate with contractors for daily construction activities and resolve site technical issues.</p><p>Witness and verify welding, NDT, hydrostatic testing, and flushing activities.</p><p>Monitor material receiving, storage, and installation compliance.</p><p>Conduct site inspections and surveillance on mechanical works.</p><p>Coordinate with QA/QC, HSE, and other disciplines for smooth construction progress.</p><p>Prepare daily/weekly mechanical construction reports and punch lists.</p><p>Ensure mechanical works are completed safely, on time, and within quality standards.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Bachelor’s Degree in Mechanical Engineering.</p><p>Minimum <b>8 years</b> of experience in Oil &amp; Gas site construction projects.</p><p><b>Must have previous experience</b> with KOC, KNPC, KIPIC, or JO in piping or pipeline construction projects.</p><p><b>KSE Membership is mandatory</b>.</p><p>Strong knowledge of piping materials, installation techniques, and pipeline construction.</p><p>Experience in supervision of fabrication shops and site erection works.</p><p>Excellent problem-solving, coordination, and communication skills.</p><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Project Engineer I - Buildings Projects<br><br><br><br><br><p><b>Job Title </b></p><br><br><br><p><b><i>Project Engineer I- Buildings Projects</i></b></p><br><br><br><p><b>Division /Project </b></p><br><br><br><p>KBR's Sustainable Technology Solutions (STS) group is seeking a <b>Project Engineer I – Building &amp; Office Tower Projects</b> to support the planning, design, procurement, construction, and commissioning of office towers, administration buildings, control centers, and associated facility infrastructure under PMC contracts.</p><br><br><br><p><b>Primary Objectives</b></p><br><br><ul><li>Management of support services for supervising and directing engineering, procurement and management of construction contractors appointed by the Client.</li><li>Ensure the successful delivery of projects through all phases, including concept design, FEED, detailed engineering, tendering, construction, commissioning, and handover.</li><li>Act as primary technical coordination interface with client to ensure that the client’s expectations are satisfied.</li></ul><ul><li>Ensure the project conforms to the client’s approved Basis of Design and local authority requirements, building regulations, sustainability objectives, and applicable international codes and standards.</li></ul><ul><li>Coordinate architectural, structural, MEP, fire protection, security, ICT, vertical transportation, and interior fit-out disciplines to achieve an integrated design solution</li></ul><br><p><b>Responsibilities</b></p><br><br><ul><li>Support project mobilization, setup, takeover, and handover activities</li><li>Set-up, take over / hand over of projects</li><li>Establish clear objectives and deliverables for design consultants and engineering teams</li><li>Management of PMC’s engineering teams during FEED, Prepare and review scopes of work, technical specifications, employer requirements, and tender documentation</li><li>Compilation of the of scope of work documents, technical part of Invitation to Bid documents and the documentation of Project Milestone Reviews</li><li>Coordination of reviews and comments on engineering and other technical deliverables of 3rd party companies like P&amp;IDs, line lists, equipment datasheets, instrumentation index, cable routing, etc. within the agreed review time.</li><li>Ensures compliance with all applicable project standards and specifications</li><li>Ensures proper compilation and updating of as-built documents, redlines, MTOs, loop folders and commissioning binders and handover documentation.</li><li>Ensures the delivery of the as built (End of Job) documentation to the client in time and good quality</li><li>Contribution to the development of overall project schedule.</li><li>Ensures work progress as per approved schedule in close cooperation with Project Controls Team</li><li>Set up and regularly maintaining a project dashboard in close cooperation with Project Controls Team</li><li>Monitors with support of the Project Controls Team cost aspects of the project within direct control to forecast final costs, trends and takes action to avoid cost overruns.</li><li>Evaluation of Earned Value / value of work for project completion with support of the Project Controls Team</li><li>Builds and maintains a healthy relationship with clients and acts as project focal point for the client</li><li>Proactively resolves scope and schedule issues with the 3rd party contractor as they arise.</li><li>Knows the contract between the FEED- or EPC-Contractor and between the Client and 3rd party contracts.</li><li>Knowing the PMC Contract between KBR and the Client</li><li>Ensures Change Order recording and participation from project team in technical parts of change order assessment</li><li>Regularly provides input to project reports to internal Project Management and the Clients</li><li>Assessment and feedback of third-party contractor’s project reports</li><li>Defines and communicates team’s priorities such as achievement of milestones and other key project objectives.</li><li>Listens to the team, discusses the issues, resolves problems and directs activities to remove roadblocks and achieve objectives.</li><li>Effective communication with the design and engineering teams (inside PMC and third parties) and other project stakeholders like operations, maintenance etc.</li><li>Regularly chairs and records project team meetings within the PMC organisation and with the client and with the 3rd party contractors or consultants.</li><li>Responsibility for preparation and status tracking of all projects related correspondence and transmittals / project documents.</li><li>Perform together with relevant discipline engineers technical bid evaluations (TBE) and award recommendations</li><li>Participates or delegates participation of discipline engineers in Factory and Site Acceptance Tests</li></ul><br><p><b>Qualifications including Required Education, Experience, &amp; Skills</b></p><br><br><ul><li><span>B. Sc. Eng from an accredited college or university.</span></li></ul><br><ul><li><span>Minimum 15 years post-graduation total experience</span></li></ul><br><ul><li><span>10 years minimum experience post qualification in infrastructure, buildings projects</span></li></ul><br><ul><li><span>5 years of minimum experience in a Senior Project Engineer/Project Manager role</span></li></ul><br><ul><li><span>Must have demonstrated ability of effective functioning in a multi-cultural environment, preferably in the Middle East.</span></li></ul><br><b>Essential skills/experience</b><ul><li>Project planning and execution.</li><li>Multidisciplinary design coordination.</li><li>Commercial and contract awareness.</li><li>Construction and commissioning management.</li><li>Stakeholder engagement and client management.</li><li>Problem-solving and decision-making.</li><li>Strong written and verbal communication skills.</li><li>Presentation and reporting skills.</li><li>Leadership and team coordination.</li><li>Risk management and change control.</li><li>Proficiency with project management and BIM platforms.</li><li>Analysis and problems solving</li><li>Creativity/innovation</li><li>Communications, written and oral.</li><li>Ability to influence and persuade.</li></ul><br><p><b>Decarbonization – Energy Transition – Sustainability </b></p><br><br><p><b>Belong. Connect. Grow. with KBR! </b></p><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Mechanical Engineer ensures the safety, efficiency, and continuous operation of a facility’s water, sanitation, and fire suppression systems. They conduct routine inspections, manage preventive maintenance schedules, troubleshoot system failures, and ensure full compliance with international safety standards and local regulations.</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Responsibilities:</p><ul><li>Lead preventive and corrective maintenance (PM/CM) operations on plumbing and fire protection systems.</li><li>Troubleshoot faults, leaks, or pressure drops in domestic water, drainage, sewage, and firefighting systems.</li><li>Oversee the servicing of fire pumps, hydrants, standpipes, wet/dry risers, and sprinkler or clean-agent suppression systems.</li><li>Ensure all building operations comply with NFPA, local fire department mandates, and international plumbing codes.</li><li>Regularly audit, test, and recertify backflow preventers, fire alarms, and fire-rated barriers.</li><li>Conduct fire risk assessments and develop mitigation strategies for existing facility structures.</li><li>Supervise on-site technicians and review the performance of external maintenance contractors.</li><li>Evaluate proposed modifications or retrofits and write clear technical specifications for vendor procurement.</li><li>Candidates must be bilingual.</li><li>Should have a valid Kuwait Driving License.</li><li>Bachelor of Mechanical Engineering Degree.</li><li>Required minimum <b>10 years of experience</b> in the related field.&nbsp;</li></ul><p><br></p><p><br></p></div>

QC Engineer <br><br> Job Id :100195374<br><br>Jobboard subscription<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>???? **URGENT VACANCIES – KUWAIT**<br><br>???? QA/QC Engineer – Mechanical<br><br> Experience: 10–15 years<br><br>???? QA/QC Inspector – E&I<br><br> Experience: 5–10 years<br><br>Industry Experience Required<br><br>Candidates should have relevant experience in **Power, Water, Oil & Gas, and Construction Projects**.<br><br>Required Documents** Updated CV Civil ID Copy Work Permit Copy Passport Copy<br><br>Requirements<br><br>✅ Candidates must be **locally available in Kuwait**<br><br>✅ **Immediate joiners** preferred<br><br>???? **Send your updated CV to:**<br><br>**[career@falghanim.com](mailto:career@falghanim.com)**<br><br>Basic Details<br><br>Qualification<br><br>Posted : Today<br><br>Job Type : Full-Time<br><br>Jobboard subscription<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : Not-Mentioned<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : career@falghanim.com

<p><b>Role: MEP Engineer</b></p><p>Industry Type: Oil &amp; Gas</p><p>Department: Construction &amp; Site Engineering</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Construction Engineering</p><p>Education</p><p>UG: B.Tech / B.E. in Mechanical Engineering, Electrical</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">Ensure the health, safety, and environmental (HSE) compliance of maritime &amp; cargo operations. Oversee everything from heavy crane operations &amp; hazardous material handling. Inspect marine vessels, port jetties heavy lifting gear to ensure SWL limits<br> <br> <p> <b>Required Candidate profile</b> </p>Functional safety, hazard identification (HAZID)&amp; knowledge of port yard &amp; stevedoring operations. B.E (Mechanical, Marine, or Industrial) combined with specialized HSE or fire safety qualifications</div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are looking for a motivated Fresh Mechanical Engineering Graduate to join a leading plastic manufacturing company based in Shuaiba, Kuwait.</p><p>This is an excellent opportunity to launch your career in a technical and production-focused industrial environment, gaining hands-on experience in manufacturing processes, production operations, machinery, maintenance, and engineering activities.</p><p><br></p><p><b>Key Requirements</b></p><ul><li>Strong interest in technical, production, and industrial operations.</li><li>Proactive, hands-on, and eager to learn and develop professionally.</li><li>Willingness to work closely with production teams, machinery, and technical operations.</li><li>Strong analytical, troubleshooting, and problem-solving skills.</li><li>Ability to understand and apply technical and engineering concepts in a manufacturing environment.</li><li>Good communication and teamwork skills.</li><li>Willingness to take initiative and work in a hands-on production environment.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Qualifications</b></p><ul><li>Fresh Mechanical Engineering graduate or up to 1 year of relevant experience.</li><li>Kuwaiti national.</li><li>Bachelor’s degree in <b>Mechanical Engineering</b> from a recognized university.</li><li>Good command of <b>Arabic and English</b>.</li><li>Proficiency in Microsoft Office and basic engineering software is an advantage.</li><li>Strong willingness to learn and develop professionally.</li></ul><p><br></p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Prepare and develop FEED packages, including mechanical design calculations, datasheets, and technical specifications.</p></li><li><p>Review and verify project drawings, datasheets, and technical documents for accuracy, completeness, and compliance with project requirements and standards.</p></li><li><p>Perform mechanical design calculations, equipment selection, and material specification in line with project requirements.</p></li><li><p>Collaborate with multi-disciplinary teams, including piping, civil, electrical, and instrumentation engineers, to ensure integrated project delivery.</p></li><li><p>Ensure designs meet client requirements, project timelines, and international standards.</p></li><li><p>Provide technical support during project execution, including design modifications, clarifications, and troubleshooting.</p></li><li><p>Ensure all engineering deliverables adhere to HSE standards, company policies, and applicable codes.</p></li><li><p>Support procurement activities by providing technical input for mechanical equipment and material selection and BOM.</p></li><li><p>Assist in developing project schedules, cost estimates, and technical reports.</p></li><li><p>Proven ability to review project drawings, technical documents, audits, and project meetings.</p></li></ul><p>Demonstrate excellent analytical, communication, and coordination skills to ensure effective collaboration and project delivery.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in Mechanical engineering or a related field.</p></li><li><p>Proficiency in engineering software/tools (e.g., AutoCAD, PDMS, Smart Plant, CAESAR II, PV Elite or similar).</p></li><li><p>Strong understanding of mechanical systems, codes, and standards (ASME, API, ISO, etc.).</p></li><li><p>Minimum 10years of experience in mechanical design within the Oil &amp; Gas sector.</p></li><li><p>Hands-on experience in FEED package preparation.</p></li><li><p>Strong capability in reviewing and interpreting project drawings and technical documentation.</p></li><li><p>Familiarity with project management tools and documentation control systems.</p></li><li><p>Strong problem-solving ability and attention to detail.</p></li><li><p>Kuwait based / Transferable Visa</p></li></ul><p><br></p><p></p></section>