Electrical Drafts Man Jobs in Kuwait

<p><strong>Job Summary:</strong> Maintenance Technician - Utility is responsible for the operation, maintenance, and troubleshooting of utility systems, including ammonia Cooling Plant, HVAC, boilers, compressors, chillers, water treatment, and other essential plant utilities. The role ensures equipment efficiency, reliability, and compliance with safety and environmental regulations.</p><p><strong>Job duties include but are not limited to:</strong></p><ul><li>Perform preventive and corrective maintenance on ammonia cooling plants, boilers, pumps, air compressors, PHE HVAC systems, chillers, cooling towers, and water treatment plants to ensure continuous operation.</li><li>Diagnose and troubleshoot mechanical, and hydraulic issues in utility equipment.</li><li>Conduct inspections and ensure compliance with health, safety, and environmental standards.</li><li>Record and report maintenance activities, breakdowns, and spare part usage.</li><li>Assist in the installation and commissioning of new utility equipment.</li><li>Monitor energy consumption and recommend efficiency improvements.</li><li>Follow standard operating procedures (SOPs) and adhere to safety protocols.</li><li>Collaborate with the production and engineering teams to minimize downtime.</li><li>Maintain an inventory of tools, spare parts, and consumables required for maintenance tasks.</li><li>Respond promptly to emergency breakdowns and provide technical support.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma or technical certification in Mechanical, Electrical or Industrial Maintenance.</li><li>Minimum 3-5 years of experience in utility maintenance within a manufacturing or industrial setting.</li><li>Strong knowledge of boilers, chillers, air compressors, HVAC systems, and water treatment plants.</li><li>Experience with preventive maintenance programs and CMMS (Computerized Maintenance Management Systems).</li><li>Familiarity with industrial safety standards and regulatory compliance.</li><li>Ability to read and interpret technical drawings and manuals.</li><li>Hands-on experience with troubleshooting and repair of electrical and mechanical components.</li><li>Strong problem-solving and analytical skills.</li><li>Ability to work independently and as part of a team.</li><li>Excellent communication and documentation skills.</li><li>Attention to detail and a proactive approach to maintenance.</li><li>Willingness to work in shifts and respond to emergency calls.</li><li>Ability to lift heavy equipment and work in confined spaces.</li><li>Comfortable working in high-temperature and noisy environments.</li><li>Standing, climbing, and bending as required during maintenance tasks.</li><li>Industrial/manufacturing setting with exposure to mechanical and electrical equipment.</li><li>Requires adherence to safety protocols and use of PPE (Personal Protective Equipment).</li></ul>

<p>Role &amp; Responsibilities We are seeking experienced Service Engineers, Senior Service Technicians, and Service Technicians for a leading Industrial Service Company in Kuwait specializing in compressed air systems. The candidate should have hands-on experience in maintenance, troubleshooting, overhaul, installation, commissioning, and repair of oil-injected rotary screw air compressors and compressed air dryers.</p><p>Compressor Brands Experience (Any One or More)</p><ul><li>Atlas Copco</li><li>Ingersoll Rand</li><li>Gardner Denver</li><li>Kaeser</li><li>Sullair</li><li>CompAir</li><li>ELGi</li><li>Chicago Pneumatic</li><li>Quincy</li><li>BOGE</li><li>Other internationally recognized industrial compressor brands</li></ul><p>Key Responsibilities</p><ul><li>Preventive and corrective maintenance of rotary screw air compressors.</li><li>Troubleshooting mechanical and electrical faults.</li><li>Major overhaul of compressor packages.</li><li>Airend inspection, repair, and replacement.</li><li>Bearing replacement and mechanical seal replacement.</li><li>Motor replacement and alignment.</li><li>Coupling alignment using dial indicators or laser alignment tools.</li><li>Maintenance of belt-drive and direct-drive compressor systems.</li><li>Oil system and cooling system servicing.</li><li>Replacement of oil separators, oil filters, and air filters.</li><li>Inlet valve, blowdown valve, minimum pressure valve, and thermostatic valve overhaul.</li><li>Solenoid valve troubleshooting and replacement.</li><li>Leak detection and repair.</li><li>Installation and commissioning of compressors after overhaul.</li><li>Performance testing and fault diagnosis.</li><li>Preparation of service reports and customer support documentation.</li></ul><p>Electrical Responsibilities</p><ul><li>Troubleshooting industrial electric motors.</li><li>Working knowledge of Star-Delta starters.</li><li>Experience with Soft Starters.</li><li>Experience with VFD/VSD drives.</li><li>Electrical control panel troubleshooting.</li><li>PLC and electronic compressor controller diagnostics.</li><li>Pressure and temperature sensor troubleshooting.</li><li>Reading and understanding electrical wiring diagrams.</li><li>Electrical fault diagnosis using multimeters and clamp meters.</li></ul><p>Air Dryer Experience</p><ul><li>Refrigerated Air Dryers.</li><li>Heatless Desiccant Dryers.</li><li>Heated Desiccant Dryers.</li><li>Automatic Condensate Drain Systems.</li><li>Air Filtration Systems.</li><li>Moisture Separators.</li><li>Dew Point Controllers.</li></ul><p>Tools Knowledge</p><p>Candidates should be familiar with :</p><ul><li>Dial Indicators</li><li>Laser Alignment Tools</li><li>Torque Wrenches</li><li>Bearing Pullers</li><li>Hydraulic Presses</li><li>Multimeters</li><li>Clamp Meters</li><li>Megger (Insulation Resistance Tester)</li><li>Pressure Gauges</li><li>Infrared Temperature Guns</li><li>Vibration Meters</li></ul><p>Other Requirements</p><ul><li>Good communication skills in English.</li><li>Ability to work independently at customer sites.</li><li>Strong troubleshooting skills.</li><li>Safety-conscious and team-oriented attitude.</li><li>Valid Passport preferred.</li><li>Ready to relocate to Kuwait.</li></ul><p><strong>Desired Candidate Profile</strong></p><h3>Preferred Candidate Profile</h3><p>Qualification</p><ul><li>ITI Mechanical / Electrical</li><li>Diploma in Mechanical Engineering</li><li>Diploma in Electrical Engineering</li><li>Equivalent Technical Qualification</li></ul><p>Experience</p><ul><li>3 to 15 years of relevant experience in industrial air compressor service and maintenance.</li><li>Hands-on field service experience is mandatory.</li><li>Experience in shutdowns, commissioning, and troubleshooting preferred.</li><li>Gulf experience will be an added advantage.</li></ul>

<p>Urgent openings for "Production Supervisor Experience in Sockets &amp; Switches Manufacturing Kuwait Location!!!</p><p>Dear Candidates, Greetings from AMExemplar Services!!!</p><p>We have openings for our prestigious client in Kuwait; they have openings for Production Supervisor Experience in Sockets &amp; Switches Manufacturing Kuwait Location PLEASE NOTE:-</p><p>1) CANDIDATES SHOULD HAVE EXP AS PRODUCTION SUPERVISOR IN SOCKETS &amp; SWITCHES MANUFACTURING INDUSTRY.</p><p>If interested, please send CV &amp; documents on EMAIL_ADDRESS</p><p>Please provide below details:-</p><p>Current Company:-</p><p>Current Location:-</p><p>Current Salary:-</p><p>Expected Salary:-</p><p>Total years of Exp:-</p><p>No of yrs exp as per below job description:-</p><p>No of years Gulf Exp:-</p><p>Notice Period:-</p><p>Passport number:-</p><p>Passport Expiry date:-</p><p>Highest Qualifications:-</p><p>Date of Birth:-</p><p>Age:-</p><p>Below is the open positions:</p><p>A) Production Supervisor</p><p>1) Diploma / Degree.</p><p>2) Minimum 3 years of experience as Production Supervisor.</p><p>3) Experience in Electrical products manufacturing is mandatory</p><p>4) Must have experience in Wiring devices (Sockets &amp; Switches) manufacturing.</p><p>5) MCB, MCCB, and RCCB manufacturing.</p><p>6) Leadership, Team Management &amp; Strong Communication Skills.</p><p>7) Ability to train, guide and develop team members effectively.</p><p>Please inform your friends &amp; colleagues for the same.</p><p>Warm Regards,</p><p>Vinayak Thakkar - Assistant Manager - Recruitment AMExemplar Services</p><p>Branches: - Surat (HO) | Navi Mumbai | Oman | UAE</p><p>Mobile: - PHONE_NUMBER</p><p>Email id: - EMAIL_ADDRESS</p><p>Website: - www.exemplarworld.com</p><p><strong>Desired Candidate Profile</strong></p><p>1) Diploma / Degree.</p><p>2) Minimum 3 years of experience as Production Supervisor.</p><p>3) Experience in Electrical products manufacturing is mandatory</p><p>4) Must have experience in Wiring devices (Sockets &amp; Switches) manufacturing.</p><p>5) MCB, MCCB, and RCCB manufacturing.</p><p>6) Leadership, Team Management &amp; Strong Communication Skills.</p><p>7) Ability to train, guide and develop team members effectively.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>ABOUT US<br>IMCO Engineering &amp;amp; Construction Co. is a 55-year leader in the G.C.C's power, utilities, and<br>infrastructure sectors, and a premier provider of powerline maintenance, live-line operations,<br>and substation services. The Advanced Systems &amp;amp; Technologies (AST) Department leads<br>IMCO's technology-driven transformation initiatives, with a strong focus on drones, remote<br>sensing, and digital platforms for inspection and asset monitoring.</p> <p>SUMMARY OF POSITION<br>We are seeking a detail-oriented and tech-savvy Engineer - Specialist to support the Drone<br>Inspection Program. The ideal candidate is a self-starter with strong analytical skills, attention to<br>detail, and a passion for learning and innovation - traits essential for our fast-evolving program.<br>This position offers an exciting opportunity to work at the intersection of traditional infrastructure<br>inspection and cutting-edge drone technology.<br>This role combines drone operation support, ground-level inspections of powerline<br>infrastructure, and technical and analytical tasks. You will participate in field inspections, operate<br>advanced sensors, and prepare structured inspection reports. In parallel, you will support the<br>continuous improvement of IMCO's inspection protocols, contribute to the refinement of internal<br>inspection software and reporting tools, and assist in the interpretation and application of<br>international standards.<br>The ideal candidate will have a strong desire to grow their skills in inspection data collection and<br>analysis and will have the opportunity to pursue several career tracks based on their<br>competency and interest. This includes advanced areas such as UAV sensor operations, UAV<br>piloting, remote sensing, GIS, and contributions to cross-disciplinary innovation projects<br>involving grid technology, IoT, and AI. This is a high-impact engineering role for someone who<br>wants to work with purpose, grow quickly, and help shape the future of infrastructure inspection<br>and maintenance.</p> <p>Key Responsibilities<br> Participate in UAV-enabled inspections of electrical transmission and substation assets<br>using advanced sensors and cameras.<br> Serve as a Visual Observer (VO) for drone operations, maintaining visual line of sight<br>with the drone and communicating with the pilot to ensure safe flights</p> <p> Assist with sensor calibration, payload configuration, and real-time data collection in the<br>field.<br> Utilize computer software solutions to perform inspection data analysis and produce<br>structured technical reports aligned with QA/QC procedures.<br> Support the continuous improvement of inspection protocols and workflows based on<br>internal findings, international best practices and international standards.<br> Collaborate with internal teams on the development and refinement of custom software<br>tools for inspection management and reporting.<br> Contribute to the development of internal inspection workflows and preventative<br>maintenance protocols.<br> Assist in GIS-based data visualization, asset mapping, and the organization of digital<br>inspection archives.<br> Adhere to all safety protocols and operational standards in outdoor, high-voltage, or<br>restricted environments.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Required Skills and Qualifications<br> Bachelor's degree in Electrical Engineering or relevant engineering discipline such as<br>Telecommunications or Mechanical Engineering (with a demonstrated knowledge of<br>power systems and electrical infrastructure principles.)<br> 0-2 years of experience for junior-level candidates, or 3-5 years of experience for<br>mid-level applicants, in field engineering, O&amp;amp;M, inspection, or infrastructure-related roles<br>in the power sector.<br> Strong computer literacy with proficiency in Microsoft Office, Google Earth Pro, data file<br>organization, and ability to quickly learn new digital tools.<br> Clear and concise written and oral communication skills in English, with the ability to<br>write technical reports and interpret engineering standards and technical documentation.<br> Willing and able to perform fieldwork in remote or outdoor environments, including during<br>hot or varied weather conditions.<br> High awareness of safety procedures and ability to operate within regulated or high-<br>voltage areas.</p> <p>Personal Attributes<br> Strong interest in electrical infrastructure, asset reliability, and structured inspection<br>programs.<br> Eagerness to learn and grow within a technology-driven inspection and innovation team,<br>with the ability to adapt to evolving protocols.<br> Interest in pursuing a career at the intersection of technology-driven data collection and<br>analysis and infrastructure inspection<br> Demonstrated attention to detail, analytical skills, and organizational discipline.<br> Ability to work independently and collaboratively as part of a team.<br> Excellent visual acuity and ability to maintain focus for extended periods.<br> Physically fit with ability to work outdoors in various weather conditions and terrains and<br>carry up to 15 kg drone equipment when needed during inspections.</p> <p> Ability and willingness to work on site and travel as required to execute project.<br><br>Preferred Skills and Attributes:<br> Prior experience with drone inspection of powerlines or ground based condition<br>monitoring (visual, IR, UV)<br> Exposure to GIS platforms (e.g., ArcGIS, QGIS) and/or CAD tools (e.g., AutoCAD,<br>MicroStation).<br> Strong preference for those with completed training or certifications in Transmission &amp;amp;<br>Distribution inspection, Thermography Certification, or Corona Certification.<br> Working knowledge of international inspection standards and preventative maintenance<br>principles.<br> Demonstrated hand-eye coordination, ideally through prior experience with remote<br>control systems, simulation environments, or gaming platforms.<br> Arabic language proficiency, spoken and written.<br> Prior safety training or certifications related to fieldwork or inspection.<br> Existing residency or citizenship in Kuwait or Saudi Arabia.<br>Why Join Us<br> Join a trusted industry leader in powerline and critical infrastructure maintenance.<br> Gain real-world experience in UAV operations, asset inspection, and field innovation<br>initiatives that combine engineering discipline with cutting-edge technology.<br> Receive comprehensive upskilling on advanced drone operations, safety procedures,<br>powerline inspection techniques across a variety of sensor modalities and relevant<br>software.<br> Build long-term skills with a clear pathway to roles in sensor operation, UAV piloting,<br>GIS/remote sensing, and inspection analysis.<br> Contribute to high-impact projects that support infrastructure safety, reliability, and<br>modernization.</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsible for operating and maintaining power generation and aircraft arresting systems in accordance with the performance work statement. Operation and maintenance services inlude, but are not limited to: catapults, arresting gear, and associated mechanical, hydraulic, and control systems involved primarily in aircraft takeoff and landing operations. Duties include installing and maintaining visual landing aids; testing and maintaining launch and recovery equipment using electric and mechanical test equipment and hand tools; activating airfield arresting systems, such as crash barriers and cables, during emergency landing situations; directing aircraft launch and recovery operations using hand or light signals; and maintaining logs of airplane launches, recoveries, and equipment maintenance. Provide operation, maintenance, inspection, and repair of power generation systems and equipment such as diesel generators and light carts. Responsibilities + Installs, removes, and operates electrical power generating and control systems, automatic transfer switches, aircraft arresting systems, and associated equipment. Checks equipment for serviceability. Positions equipment such as gasoline and diesel engines, generators, switchgears, air compressors, and other power generating auxiliary equipment. Installs, positions, rewinds, and pretensions aircraft arresting systems. Certifies aircraft arresting systems as required. Checks installed equipment to ensure compliance with publications, policies, and directives. Inspects, tests, and services component systems such as safety, fuel, lubrication, cooling, air pressure, pumps, regulators, governors, and accessory equipment. Observes and interprets instruments such as ammeters, voltmeters, frequency meters, synchro scopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges. Adjusts engine generator systems to maintain proper voltage, current frequency, and synchronization. Synchronizes multiple generators. Operates high and low voltage switches, circuit breakers, rheostats, and other controls on switchgear and distribution panels. Performs electrical power control and distribution functions. + Maintains, modifies, and repairs electrical power generating and control systems, automatic transfer switches, aircraft arresting systems, and associated equipment. Performs inspections and interprets findings to determine corrective action. Identifies and records engine and generator malfunctions. Uses precision test equipment, troubleshoots malfunctions, and inspects parts for excessive wear and other conditions. Removes, repairs, and replaces defective power generating equipment components. Performs corrosion control. Inspects and replaces gauges and meters. Maintains aircraft arresting systems, including electrical, hydraulic, rewind, and pneumatic systems, and other electronic components. Bench checks components and subassemblies. Tests and calibrates repaired items. Reviews performance data and maintenance records to determine adequacy of maintenance. Interprets data related to electrical power generating and aircraft arresting systems to ensure overall mission success. + Maintains records. Posts entries on operation, inspection, and maintenance records. Records meter readings, wear and alignment measurements, fuel consumption, and other data in performance logs. Furnishes information for reports and recommends changes to correct defective equipment or improve operating procedures. Complies with environmental policies. + Ensure all work areas and equipment are kept clean, orderly and in a safe manner. + Performs quality and safety self-inspections. + Responsible for proper utilization and safeguarding of all government and contractor provided property (e.g., to include government facilities, equipment and tools). + Perform other duties as assigned in accordance with contractual, functional, and mission requirements. Qualifications Minimum Qualifications Education/Certifications: + Prior military service of AFSC 3E072, Power Production Journeyman + Must be MAAS/BAK-12 Factory Trained &amp; Certified + High school diploma or equivalent. + Must be a U.S. Citizen with a current, valid U. S. Passport and Driver’s License (able to drive manual transmission). + Must have and maintain a valid U. S. SECRET Security Clearance prior to deployment. + Must have the capability of obtaining an Air Force flight line driver’s license. + Must be able to pass a flight line access test and obtain flight line access badge. + Must be able to pass employment and deployment qualification requirements that include psychological, medical, dental, drug testing, background checks, etc. + Candidates must successfully complete both online and hands on CBRN (chemical, biological, radiological and nuclear) defense training. Training includes the successful fit testing of DOD provided protective gear. Experience: + Must have four years of experience in operation and maintenance of BAK-12 aircraft arresting systems and completed factory training on Mobile Aircraft Arresting Systems (MAAS)/BAK-12. + Shall have knowledge of principles of electronics and electricity including generation, conversion, transformation, distribution and utilization. + Must have three years of experience operating and maintaining prime power spot generators and backup generators. Skills: + Must be capable of giving and receiving instructions. + Must be fluent reading and speaking English. + Able and willing to work periods of long hours to meet mission requirements. + Military experience in a contingency environment and knowledge and experience working with government contracts preferred. Other Requirements: + Work will be outdoors and indoors. Work in extreme outside temperatures reaching 115 degrees and winds reaching 30mph may be required. Exposure to cold, dust, noise, and chemicals may occur. Overtime and shift work may be required depending on contractual needs. Employee must comply with all Federal, State and Local regulations and published Company work rules as well as written instructions. Task specific work environment training will be provided as required. Must be prepared to function in a wartime environment to support U. S. interests. 100% Overseas Assignment. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p>The Maintenance Supervisor is responsible for the smooth operation of all equipment, supervising all kinds of maintenance activities such as preventive maintenance, corrective maintenance, breakdown emergency cases, etc. He/she is responsible for planning the replenishment of spare parts and tools as needed. </p><p><strong>Desired Candidate Profile</strong></p><p>Degree or diploma in mechanical/ electrical engineering</p><p>3-5 years of relevant experience in the FMCG industry</p><br><p>Follow up on the requisitions with the concerned department for maintenance jobs Perform preventive maintenance of production lines as per the schedule Schedule and follow up on all capex maintenance tasks assigned Recommend upgradation of electrical and electronic systems when necessary Track maintenance expenses on a daily basis to ensure it is under budget Conduct a timely audit of each machine, identify the probable failures and rectify the same</p><p>Control the spare parts inventory and ensure optimum utilisation Order/ re-order required maintenance materials and supplies on time Ensure maximum usage of resources with minimum time, risk, and expenses to the company</p><p>Undertake special project </p><p>Ensure adherence to all relevant quality, health, safety, and environmental procedures, instructions, and controls</p><p>Ensure workspace is within the company’s Good Manufacturing Practice (GMP) and 5S standards Follow hygiene and uniform requirement as per company policy and standards</p><p>Report to the manager or supervisor on any possible problem or hazard present in the working area</p><p>Assist in the preparation of timely and accurate departmental statements and reports to meet Company and department requirements, policies, and standards .</p><p>Knowledgeable in machines operating processes and production equipment Thorough knowledge of technical components and functioning of manufacturing machines Thorough understanding of health and safety procedures. </p><br><p><br><br></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We Are Hiring an Architectural Engineer</p><p>The candidate bridges the gap between architectural design and structural implementation. He/She is responsible for designing, analyzing, and building technical systems—such as HVAC, electrical, and structural systems—to ensure buildings are safe, sustainable, and functional.</p><p>A comprehensive, adaptable job description for an Architectural Engineer outlines the multidisciplinary nature of the role: </p><p>Core Responsibilities</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;System Design: Develop structural, mechanical, electrical, plumbing, and fire safety systems using CAD and BIM software (e.g., AutoCAD, Revit, 3ds Max). [</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Structural Integrity: Analyze proposed designs to ensure structural stability, load-bearing safety, and compliance with local building codes. </p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Client &amp; Team Collaboration: Consult with architects, project managers, and clients to align structural designs with aesthetic goals, project budgets, and timelines. </p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Compliance &amp; Permitting: Ensure all blueprints and building systems adhere to governmental regulations and standard engineering norms. </p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Quality Assurance &amp; Site Visits: Review bidding documents (BOQ), approve workshop drawings, and conduct regular site visits to evaluate construction quality and troubleshoot design flaws</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Typical Qualifications &amp; Skills</p><p>Education: Bachelor's degree in Architectural Engineering, Civil Engineering, or a closely related field.</p><p>Licensure/Registration: Usually requires registration with local engineering bodies (e.g., membership in the Kuwait Society of Engineers for the GCC region).</p><p>Technical Proficiency: Mastery of design and engineering software like AutoCAD, ArchiCAD, and Revit.</p><p>Soft Skills: Exceptional project management, analytical problem-solving, teamwork, and client-presentation abilities.</p></div>

<p><b>Role: MEP Engineer</b></p><p>Industry Type: Oil &amp; Gas</p><p>Department: Construction &amp; Site Engineering</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Construction Engineering</p><p>Education</p><p>UG: B.Tech / B.E. in Mechanical Engineering, Electrical</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Key responsibilities</p><p>Design, review, and oversee mechanical systems including pumps, pipelines, valves, blowers, and filtration unitsSupervise installation and commissioning of mechanical equipment at water treatment plantsDevelop and implement preventive maintenance programs for mechanical assetsPrepare technical reports, method statements, and as-built documentationCoordinate with civil, electrical, and process engineers to ensure integrated project deliveryIdentify and resolve mechanical failures and technical issues during project executionEnsure compliance with health, safety, and environmental regulations on-site</p><p><br></p><p>Qualifications</p><p>Bachelor's degree in Mechanical Engineering or related fieldMinimum 5 years of experience in water/wastewater projectsProficiency in AutoCAD and mechanical design softwareFamiliarity with international standards (ASME, BS, ISO)Strong problem-solving and communication skills</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Preferred skills</p><p>Experience with desalination or reverse osmosis systemsKnowledge of SCADA and process control integrationGCC project experienceProfessional engineering certification (PE or equivalent)Bilingual (Arabic/English) is an advantage</p></div>

<p>Facilities &amp; Building Maintenance Management Hotel Experience Mandatory HVAC, MEP systems Electrical, Plumbing Fire safety systems BMS Preventive maintenance Salary: KWD 350 to 450 Free Accom Work VISA&nbsp;</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>About The Client</b></p><p>A leading engineering and contracting company in Kuwait, recognized for delivering innovative solutions across mechanical, electrical, and fire protection systems. With a strong presence in the Kuwait market, the group has built a reputation for excellence, compliance with local authorities, and long-term client partnerships. Guided by a commitment to quality and safety, the organization continues to drive growth through specialized projects and trusted expertise.</p><p><b>About The Role</b></p><p>The position will lead and oversee the planning, execution, and growth of specialized engineering projects and is pivotal in driving business development, ensuring compliance with Kuwait Fire Force (KFF) regulations, and strengthening client relationships. Reporting directly to the General Manager, the Department Head will provide strategic leadership, manage departmental operations, and deliver innovative firefighting and engineering solutions tailored to the Kuwait market.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>About You</b></p><p>An ideal candidate would have the following:&nbsp;</p><ul><li>Bachelor's Degree in Mechanical or Electrical Engineering (mandatory)</li><li>Minimum 15 years of professional experience, with at least 5 years in Kuwait.</li><li>Strong background in firefighting systems and knowledge of Kuwait's engineering market.</li><li>Proven track record in sales, business development, and client relationship management.</li><li>Hands-on experience dealing with the Kuwait Fire Force (KFF) and related authorities.</li><li>Demonstrated ability to manage teams, lead departmental operations, and deliver results.</li><li>Must hold a valid residency/ Visa 18&nbsp;</li></ul><p><br></p></div>

<p>Facilities &amp; Building Maintenance Management Hotel Experience Mandatory HVAC, MEP systems Electrical, Plumbing Fire safety systems BMS Preventive maintenance Salary: KWD 350 to 450 Free Accom Work VISA Online Interview WhatsApp: +9PHONE_NUMBER</p><p><strong>Desired Candidate Profile</strong></p><p>Facilities &amp; Property Maintenance Manager experience in Hotel Industry</p>

<p>Maintenance and troubleshooting of container terminal / bulk handling cranes, Siemens S7-300 PLC, Siemens AC ,lifting equipment electrical systems, and crane critical components.</p><p><strong>Desired Candidate Profile</strong></p><p>Proven experience in the port industry, specifically in container terminal equipment, bulk handling equipment, heavy equipment, or related terminal maintenance activities.</p>

<p>Protection Maintenance Engineer</p><p>&nbsp;</p><p>Qualification</p><p>Bachelor Degree in Electrical Engineering according to Kuwait Bachelor Standard. Atleast 4 Years</p><p>10 Years of Minimum Experience</p><p>&nbsp;</p><p>Key Responsibilities</p><p>* Experience in maintenance of protective equipment’s involved in EHV, HV and LV substations.</p><p>* He should have theoretical and practical know how of all types of protection relays including distance protection relays in the substations including testing.</p><p>* He should be able to test and maintain battery charger and electronic circuit.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Experience in Maintenance of protective equipments involved in EHV, HV and LV substations. He should have theoretical and practical knows how of all types of protection relays including Bus Bar protection relays. He should be able to test and maintain battery charger and electronic circuit in the Substation. He should be able to use all types of test kits and well versed in drawing and testing of protection relays.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>BE / B Tech in Electrical Engineering</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><span><strong>Internship Overview</strong></span></p><br> <p><span>The Intern will support the Facilities Management team in the operation, maintenance, and continuous improvement of commercial buildings and warehouse facilities. This role provides hands-on experience in facilities engineering, preventive maintenance, project coordination, asset management, and building operations.</span></p><br> <p><span><strong>Key Responsibilities</strong></span></p><br> <ul> <li><span>Support day-to-day facilities, engineering and maintenance activities.</span></li> <li><span>Assist in planning, coordinating, and monitoring Facilities Management projects.</span></li> <li><span>Participate in site inspections, facility condition assessments, and progress reporting.</span></li> <li><span>Support preventive maintenance planning and asset management activities.</span></li> <li><span>Learn and assist in the use of CAFM/IWMS systems to support Facilities Management operations.</span></li> <li><span>Assist with engineering drawings, technical documentation, and project coordination tasks.</span></li> <li><span>Support building operations and maintenance activities for commercial and warehouse facilities.</span></li> <li><span>Ensure compliance with Health, Safety, and Environment (HSE) requirements and engineering best practices.</span></li> <li><span>Contribute to sustainability and continuous improvement initiatives.</span></li> <li><span>Shadow Facilities Engineers to gain practical knowledge and hands-on experience in Facilities Management.</span></li> <li><span>Perform other duties as assigned by the Facilities Management team.</span></li> </ul> <p><span><strong><span>Candidate Requirements</span></strong></span></p><br> <ul> <li><span>Fresh graduate with a <strong>Bachelor’s Degree in Electrical Engineering</strong>.</span></li> <li><span>Strong interest in Facilities Management, building operations, maintenance, and engineering projects.</span></li> <li><span>Basic understanding of electrical systems, building services, and maintenance principles.</span></li> <li><span>Proficient in Microsoft Office applications (Excel, Word, and PowerPoint).</span></li> <li><span>Strong analytical and problem-solving skills.</span></li> <li><span>Excellent communication and interpersonal skills.</span></li> <li><span>Ability to work effectively both independently and as part of a team.</span></li> <li><span>Eagerness to learn and develop within a professional Facilities Management environment.</span></li> </ul> </div>

<ol><li><p>Overall 6 Years Experience in Construction Project, Instrumentation Works in Oil & Gas / Refinery / Petrochemical Projects & Out of 6 Years, Min. 2 Years in Cost & Estimation Functions.</p></li><li><p>Review of Tender Documents & Preparing Enquiries for Subcontract / Vendor Service works.</p></li><li><p>Must have good computer skills (MS Office).</p></li><li><p>Gulf / Abroad Experience Preferred.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><p> B. E. / Btech– Electrical & Electronics (OR) Electronics & Instrumentation Engineering (4 Years Full Time Course) </p>

<p>Perform maintenance and repair of CNC machines / PLC / VFD programming /repair & maintenance of Process plants /EOT Cranes / Air compressor /Utility equipment’s/Pneumatic and Hydraulic systems. Knowledge: Ability to read and interpret Electrical/Mechanical/Hydraulic Circuits and OEM manuals. Proficient in use of Computer /AutoCAD/ Basic electronics repair / Knowledge on Fire Fighting and HVAC systems. </p><p><strong>Desired Candidate Profile</strong></p><p>We are looking for a Maintenance Engineer</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>ASAB ESS: Electrical Engineer (Secret Clearance)<br><br><p><b>Belong, Connect, Grow, with KBR! </b></p><br><br><br><p><b>KBR Government Solutions</b> delivers full life cycle professional and technical solutions that improve operational readiness and drive innovation. Our solutions help ensure mission success on land, air, sea, space and cyberspace for the Department of Defense, intelligence community, NASA and other federal agencies. KBR’s areas of expertise include engineering, logistics, operations, science, program management, mission IT and cybersecurity.</p><br><br><br><p>Our people make the world a more productive, efficient and fascinating place. And that's only the beginning.</p><br><br><br><p>The <b><i>Ali Al Salem Air Base </i></b>shall provide architectural and engineering services that support project, work order, and work request operations.&nbsp;</p><br><br><br><p>These functions are to ensure the delivery of&nbsp;BASE OPERATING SUPPORT-INSTALLATION (BOS-I) services to the 378 Air Expeditionary Wing (AEW), mission partners, and tenant units, including transient, temporary duty (TDY), permanent party, and rotational personnel.</p><br><br><br><p><b>RESPONSIBILITIES:</b></p><br><br><ul><li>Knowledge and Familiarity with War Reserve Material (WRM) assets</li><li>Efforts include planning for repair and maintenance, designing, providing technical support, and updating record drawings.</li><li>Provide effective Electrical Engineering support to ensure projects are designed and completed to support mission requirement based on guidance from 378 Engineering Flight Chief.</li><li>Develop and administer Activity/Asset Management Plans (AMP) that translates Air Force and installation objectives into asset-related decisions by understanding assets’ physical attributes, condition, usage, and performance as well as the realized and potential value to the mission. These plans should balance risk, current and future objectives, resource limitations, and lifecycle management.</li><li>As required, be available within two (2) hours of notification to meet on the installation with Government personnel.</li><li>Design and develop designs along with scope of work in support of various projects on PSAB.</li><li>Provide frequent updates to the 378 Engineering Flight Chief along with briefings upcoming projects prior to sending to 378 ECONS for solicitation.</li><li>Ensure compliance with all US laws, Kuwait Labor Law, US EPA Guidelines, Final Governing Standards (FGS), Overseas Environmental Baseline Guidance Document (OEBGD), US Building Codes, Department of Defense (DoD) Unified Facilities Criteria (UFC), National Electric Code (NEC), National Electric Safety Code (NESC), Occupational Safety and Health Administration (OSHA) standards, National Fire Protection Association (NFPA) and Institute of Electrical and Electronics Engineering (IEEE) standards. In addition, ensure site activities comply with applicable US, DoD, and Host Country codes and standards to include American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE), International Plumbing Code (IPC), National Plumbing Code (NPC), Building &amp; Fire codes concerning health, safety, and the environment in the design and construction of real property facilities at all times.</li><li>Performs other duties as assigned.</li></ul><br><p><b>MATERIAL &amp; EQUIPMENT DIRECTLY USED: </b></p><br><br><ul><li>May be exposed to potentially hazardous conditions that require wear of hard hats, gloves, steel toed boots, hearing protection, safety glasses and other personal protection equipment (PPE); may be required to push, pull and lift heavy equipment.</li><li>Use of Land Mobile Radios, cell phones, laptop, and other devices to maintain contact and accountability of work activities.</li></ul><br><p><b>WORKING ENVIRONMENT:</b></p><br><br><ul><li>Work will be indoors and outdoors.</li><li>Exposure to heat, cold, dust, noise, chemicals may occur.</li><li>Overtime and shift work may be required depending on contractual needs as well as occasional to frequent travel.</li><li>Employee must comply with all Federal, State and Local regulations and published Company work rules as well as written instructions.</li><li>Task specific work environment training maybe provided.</li><li>Must be prepared to function in a wartime or contingency environment to support&nbsp;U.S. interests.</li></ul><br><p><b>PHYSICAL ACTIVITIES:</b></p><br><br><ul><li>Physical requirements include lifting up to 35lb, team lifting up to 50lbs, climbing, extended sitting, or standing, stooping, stretching, and bending.</li><li>Work may require using and wearing personal protective equipment such as, hearing and eye protection, hard hat and steel-toed boots as well as Individual Protective Equipment (IPE) which may include but not limited to Level III plus/IV Individual Body Armor with both front and back ballistic plates, ACH helmet, clothing (undergarments, shirts and pants and/or coveralls), reflective vests/belts, sound suppression devices, etc.</li><li>Day-to-day physical requirements may involve standard office activities including sitting/standing for extended periods of time, attending meetings, use of keyboard and mouse repetitively, lifting and carrying less than 20 lbs. frequently, etc.</li><li>Work requires moderate physical exertion including walking to operating areas and walking up stairs</li></ul><br><p><b>BASIC QUALIFICATIONS:</b></p><br><br><p>Specific contract requirements regarding education and experience will prevail.</p><br><br><ul><li>Bachelor’s Degree in Electrical Engineering with 3 years relevant experience on similar projects.</li><li><b>Must be a U.S. Citizen with a current U. S. Driver's License.</b></li><li><b>Must possess passport book (not passport card) with at least 13 months of remaining validity AND 6 blank visa/stamp pages remaining</b></li><li><b>Must have and maintain a valid U. S. SECRET Security Clearance or ability to obtain a secret clearance before deploying. </b></li><li>Must be able to read, write, speak, and understand English fluently</li><li>Candidate must also meet <b>CENTCOM MOD-15</b> theater requirements.</li></ul><br><p><b>SKILLS:</b></p><br><br><ul><li>Project management, pro-active, well organized, results-oriented, and team player with decision-making ability.</li><li>Use computers &amp; related software such as Microsoft Office and other common products used in office environments or within the Engineering and Construction Industry.</li><li>Able and willing to work periods of long hours to meet mission requirements.</li><li>Excellent interpersonal and communication skills with documented supervisory experience.</li><li>Experience in contingency environments as well as knowledge &amp; experience working with government contracts.</li></ul><br><p><b>KBR Benefits</b></p><br><br><p>KBR offers a selection of competitive lifestyle benefits which could include 401K plan with company match, medical, dental, vision, life insurance, AD&amp;D, flexible spending account, disability, paid time off, or flexible work schedule. We support career advancement through professional training and development.</p><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><span><span>1.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Organize and administer the Maintenance Department, ensuring that effective work control and productivity are maintained, whilst using every means to increase productivity and reduce costs.</span></p> <p><span><span>2.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Direct and supervise the implementation of an effective trouble report system, together with other day-to-day works of general maintenance and repair to ensure that the building, its contents and its surroundings are at all times in first-class condition throughout</span></p> <p><span><span>3.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Identify and arrange for all necessary work to maintain a high standard whether mechanical, electrical or civil, to be completed in a timely manner.</span></p> <p><span><span>4.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Ensure that a full preventive maintenance schedule exists for every item of mechanical and electrical plant or equipment,</span></p> <p><span><span>5.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Negotiate terms and conditions for all manufactures / agents and service contracts with the assistance of the controller.</span></p> <p><span><span>6.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Keep up-to-date records of all test certificates / licenses</span></p> <p><span><span>7.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Conduct frequent meetings with other Department Heads to review the current performance of their equipment.</span></p> <p><span><span>8.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Participate in assessing the long-term requirements of the Mall, including overhaul / rehabilitation programs or renewal / replacement works, etc. In conjunction with TMM General Manager – Maintenance.</span></p> <p><span><span>9.<span>&nbsp;&nbsp;&nbsp;&nbsp; </span></span></span><span>Responsible for budgeting and financial planning for the Maintenance Department</span></p> <p><span><span>10.<span>&nbsp; </span></span></span><span>Perform other related duties as assigned or requested</span></p> </div><h2 data-automation-id="subHeaderPreferredCandidate" class="h5"> Preferred candidate </h2> <div class="row is-m v-align-top t-small bg-mute"> <div class="col is-3 p5" data-automation-id="label_Years_of_experience"> <b>Years of experience</b> </div> <div class="col is-9 p5" data-automation-id="data_Years_of_experience"> 7+ years </div> </div>