Cctv Jobs

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Role Summary :</b>The QHSE Officer is responsible for ensuring compliance with Quality, Health, Safety, and Environmental (QHSE) standards while maintaining Food Safety Management Systems in a water, juice, dairy, or food manufacturing environment. The role ensures product quality, regulatory compliance, workplace safety, and continuous improvement.</p><p><b>Key Responsibilities:</b></p><ul><li>Implement and maintain Quality, Food Safety, Health, Safety, and Environmental Management Systems. </li><li>Ensure compliance with HACCP, GMP, FSSC 22000, ISO standards, GSO, NSF, and local regulatory requirements. </li><li>Conduct GMP, HACCP, internal, customer, and certification audits. </li><li>Monitor product quality, food safety, sanitation, environmental, and workplace safety practices. </li><li>Conduct risk assessments, incident investigations, emergency drills, and implement corrective and preventive actions (CAPA). </li><li>Lead employee training and awareness programs on QHSE policies and food safety. </li><li>Prepare QHSE reports, monitor KPIs, and support continuous improvement initiatives.&nbsp;</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Qualifications</b></p><ul><li>Degree or Diploma in Safety, Environmental Science, Food Science, or a related field. </li><li>Professional certifications in Occupational Health &amp; Safety (NEBOSH, IOSH, OSHA, or equivalent) are preferred. </li></ul><p><b>Experience</b></p><ul><li><b>Minimum 5 years</b> of QHSE experience in <b>water, juice, dairy, beverage, or food manufacturing</b>. </li><li>Strong knowledge of <b>ISO 9001, ISO 14001, ISO 45001, FSSC 22000, HACCP, GMP, NSF, and GSO standards</b>. </li><li>Experience in food safety systems, internal audits, emergency response, fire safety, sanitation, and regulatory compliance.</li></ul><p><br></p></div>

<p>Should have ITI / Diploma in related field. Must have 5 years’ experience in service automotive workshop. Strong knowledge of workshop formalities. Also, experience in diagnosing , troubleshoot, repairs and maintain vehicle air conditioning systems. Kuwait experiences preferred. Must be proficient in English (speaking, reading & writing).</p><p><strong>Desired Candidate Profile</strong></p><p>Should have ITI / Diploma in related field. Must have 5 years’ experience in service automotive workshop. Strong knowledge of workshop formalities. Also, experience in diagnosing , troubleshoot, repairs and maintain vehicle air conditioning systems. Kuwait experiences preferred. Must be proficient in English (speaking, reading & writing).</p>

<strong>Overview</strong> <br> <br> <p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p> <br> <strong>Responsibilities</strong> <br> <br> <p>The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities include maintenance and serviceability procedures for subsystem components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of airframes and power plants engineering principles, techniques, and methods in the maintainability of existing equipment and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</p> <p> </p> <p> <strong>Major Job Activities</strong> </p> <p> <strong>Description:</strong> </p> <p> </p> <p> Apply and provide a thorough working knowledge of airframes and power plant systems to include aircraft modification procedures and experience with specific airframe, hydraulic, engine, and propeller systems, systems integration, system/component failure analysis, inspection, repair, and testing of airframes and power plant systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems.</p> <p> </p> <p> Performance abilities include performance of maintenance and servicing related aircraft components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation and incorporates applicable technical directives and bulletins.</p> <p> Troubleshoots and/or repairs malfunctions in the aircraft airframes and power plants systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J MRC/MIMs, to include performing calibration procedures and required functional tests.</p> <p> </p> <p> Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs.</p> <p> </p> <p> Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components</p> <p> </p> <p> Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions.</p> <p> Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control.</p> <p> Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system.</p> <p> Performs applicable O and I level maintenance functions in support of In-Flight Refueling Systems and rebuild shop and Aircraft Tire &amp; Wheel rebuilding.</p> <p> Perform scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment, pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated airframes and power plants equipment systems.</p> <p> Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures.</p> <p> Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/</p> <p> Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures</p> <p> When necessary, perform other duties and supervisory functions, critical to the function of the program and to assure compliance with the Performance Work Statement (PWS).</p> <br> <strong>Qualifications</strong> <br> <br> <p> <strong>EDUCATION and/or EXPERIENCE:</strong> </p> <p>Graduation from a standard four (4) year high school or equivalent (GED)</p> <p> </p> <p>This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance.<br> </p> <p> </p> <p> <strong>Material &amp; Equipment Directly Used</strong> </p> <p> </p> <p>Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems.</p> <p> </p> <p><br></p>

<p>CACI is seeking a MI Systems Maintainer Integrator II to support our mission critical Program in Kuwait. As the selected candidate, you will perform installation, integration, configuration, employment, preventive maintenance, precision alignment, detailed and complicated diagnostics, troubleshooting, corrective maintenance, electronics monitoring and teardown of complex Command, Control, Communications, Computers, Intelligence, Surveillance, and Reconnaissance (C4ISR) and systems supporting SIGINT, FISINT, GEOINT, HUMINT, CI, TECHINT, OSINT, and All Source Intelligence for tasking, collection, processing, exploitation, production and dissemination at all echelons from tactical to national in multi-domain environments.</p><p>Responsibilities:</p><ul><li>Conduct installation, de-installation, reconfiguration, modification work orders and updates of computer hardware and software in local, regional, or global intelligence architectures including NIPRNet, SIPRNet, JWICS, TDN2, Special Access Programs (SAP) networks and coalition networks.</li><li>Assist with configuration assessments, fielding, testing, modernization, reset, de-fielding, demilitarization and disposal of sensitive equipment.</li><li>Inspect, test, diagnose, troubleshoot, repair and perform preventive maintenance on complex antenna and radio frequency distribution systems.</li><li>Perform tests on electrical, electro-optical, and electro-mechanical equipment using multi-meters, oscilloscopes, signal generators, spectrum analyzers, bit error rate testers (BERT), and other complex and specialized test measurement and diagnostic equipment (TMDE), wire diagrams, logic and signal flow charts, technical manuals, troubleshooting charts, performance aids, schematic, and logic diagrams.</li><li>Repair analog and fiber optics cables.</li><li>Perform pre and post flight inspections on Guardrail Common Sensor (GRCS) mission equipment and data link.</li><li>Submit standard and non-standard repair parts requests.</li><li>Prepare equipment for transportation or shipment.</li><li>Prepare maintenance, property accountability, and transportation forms and records.</li><li>Able to maneuver in small spaces and lift up to 50lbs.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><p>Associate Degree in Electronics or related field from an accredited college/university + 4 years of relevant experience OR Six years of military training in MI Systems Maintenance and Integration may be considered in lieu of degree</p><p>Experience on maintenance and integration on one or more of the following: GRCS; Enhanced Medium Altitude Reconnaissance Surveillance System (EMARSS) mission equipment; Tactical Command Data Link (TDCL); GRCS Operational Ground Station (OGS); Distributed Common Ground Station- Army (DCGS-A); software defined SIGINT collection platforms; biometrics collection, processing, exploitation, and dissemination equipment; CI/HUMINT support systems; TROJAN systems or satellite communication terminals providing TDN2; TENCAP systems; or intelligence non-standard equipment.</p><p>Information assurance certifications for Tier I and II computer, servers, networks and global intelligence architectures integration and maintenance are desired.</p><p>US Citizen with active TS/SCI clearance is required</p><p>Willing to work shift work, to include weekends and potentially holidays.</p><p>Must be able to meet the requirements to obtain a work Visa 18 for Kuwait</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>THE MISSION You are the digital heartbeat of Mama ensuring our technology runs smoothly, our teams stay connected, and our guests enjoy a seamless experience powered by reliable systems. As our IT Coordinator , you ll play a key role in supporting the technology operations of Mama Shelter Cape Town during its pre-opening journey and beyond. Working closely with the IT team, hotel departments, and Ennismore support functions, you ll help establish, maintain, and optimise the systems that keep Mama running. Here s what you ll be responsible for:</p><p><strong>Technology Support Champion</strong> Provide day-to-day IT support to hotel colleagues, troubleshooting hardware, software, network, and system-related issues to ensure smooth operations.</p><p><strong>Systems Guardian</strong> Support the setup, maintenance, and effective use of hotel technology systems, ensuring reliability and alignment with Mama and Ennismore standards.</p><p><strong>Pre-Opening IT Support</strong> Assist with IT setup, system installations, user access, hardware deployment, and technology readiness ahead of Mama Shelter Cape Town s opening.</p><p><strong>User Experience Partner</strong> Support colleagues across all departments by providing timely solutions, guidance, and training on IT systems and tools.</p><p><strong>Cybersecurity Advocate</strong> Follow and promote IT security standards, data protection practices, access controls, and company policies to safeguard hotel information.</p><p><strong>Hardware &amp; Asset Controller</strong> Maintain accurate records of IT equipment, support inventory management, and ensure all technology assets are properly maintained.</p><p><strong>Vendor &amp; Support Coordination</strong> Coordinate with external IT providers and vendors to resolve issues and ensure effective delivery of technology services.</p><p><strong>Systems &amp; Application Support</strong> Support key hospitality systems including PMS, POS, network platforms, and business applications to ensure operational continuity.</p><p><strong>Team Player with Curiosity</strong> Bring a proactive mindset, problem-solving approach, and passion for technology to support Mama s vibrant and fast-paced environment. At Mama Shelter Cape Town, technology is at the heart of creating effortless experiences and you ll help ensure Mama s teams stay connected, supported, and ready to deliver unforgettable moments.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree or diploma in Information Technology, Computer Science, or a related field.</p><p>Previous experience in IT Support, Help Desk, System Administration, or a similar role.</p><p>Experience within a hotel, resort, or hospitality environment is advantageous.</p><p>Knowledge of computer hardware, software, networking, and troubleshooting techniques.</p><p>Familiarity with Microsoft Windows environments, basic server administration, and network infrastructure.</p><p>Experience with hospitality systems and applications is preferred.</p><p>Proficiency in Microsoft Office applications and IT support tools.</p><p>Strong technical troubleshooting and problem-solving skills.</p><p>Excellent communication and customer service abilities.</p><p>Strong organisational skills with attention to detail.</p><p>Ability to manage multiple priorities in a fast-paced environment.</p><p>Commitment to maintaining data security, confidentiality, and operational reliability.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are seeking a highly skilled Senior HVAC Engineer to join our dynamic team in Kuwait, where you will play a pivotal role in delivering innovative HVAC solutions for diverse construction projects. This position is ideal for a seasoned professional who is eager to lead and influence the technical direction of our projects while collaborating with various stakeholders. Your expertise will not only contribute to the successful execution of projects but also enhance our team's reputation for excellence in the industry.</p><p>As a Senior HVAC Engineer, you will have the opportunity to mentor junior engineers and foster a culture of learning and development within the team. We believe in investing in our employees' growth, which is why we offer continuous training programs and workshops that will help you stay ahead of industry trends and technologies. This role is not just about managing projects; it’s about shaping the future of our engineering practices and ensuring that our solutions are sustainable and efficient.</p><p>In this strategic position, you will collaborate closely with project managers, architects, and other engineering disciplines to ensure that all HVAC systems are designed and implemented to meet the highest standards of quality and performance. Your leadership will drive cross-functional initiatives that align with our business vision, ultimately contributing to the successful completion of projects that exceed client expectations. Join us and take the next step in your career, where your contributions will have a lasting impact on the industry.</p><ol><li><b>Responsibilities:</b>Lead the design and implementation of HVAC systems for various construction projects, ensuring compliance with local codes and standards while utilizing advanced design software to optimize system performance.</li><li>Conduct thorough analysis and calculations to determine the heating and cooling loads for buildings, applying energy-efficient practices that align with sustainability goals and client requirements.</li><li>Oversee the installation of HVAC systems on-site, coordinating with contractors and subcontractors to ensure adherence to design specifications and project timelines.</li><li>Review and approve technical submittals, shop drawings, and equipment selections to ensure that they meet project specifications and quality standards.</li><li>Provide technical support and guidance to junior engineers and other team members, fostering a collaborative environment that encourages knowledge sharing and professional development.</li><li>Monitor project progress and budgets, implementing corrective actions as necessary to ensure projects are delivered on time and within financial constraints.</li><li>Conduct regular site inspections and quality control checks to identify potential issues and ensure that HVAC installations meet design and performance criteria.</li><li>Collaborate with other engineering disciplines to integrate HVAC systems with electrical, plumbing, and structural components, ensuring seamless project execution.</li><li>Stay updated on industry advancements and emerging technologies in HVAC systems, incorporating innovative solutions into project designs to enhance efficiency and performance.</li></ol> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Proficient in HVAC design software such as AutoCAD and Revit, enabling precise and efficient system designs.</li><li>Strong knowledge of building codes and standards related to HVAC systems, ensuring compliance and safety in all projects.</li><li>Excellent analytical skills to perform load calculations and energy modeling for various building types.</li><li>Effective project management abilities, capable of leading teams and managing multiple projects simultaneously.</li><li>Outstanding communication skills, facilitating collaboration with stakeholders and team members across various disciplines.</li><li>Experience with sustainable design practices and technologies, promoting energy efficiency and environmental responsibility.</li><li>Ability to mentor and develop junior engineers, fostering a culture of continuous improvement and professional growth within the team.</li></ul></div>

Inventory Management Executive<br><br> Job Id :100195269<br><br>Hire Resume Writers<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>We are looking for a candidate with strong ERP and Advanced Excel experience to manage and control inventory.<br><br>Key Requirements<br><br>Experience in Inventory Management<br><br>Strong knowledge of ERP systems<br><br>Advanced Microsoft Excel skills<br><br>Experience in stock control, inventory tracking, and reporting<br><br>Ability to monitor stock movements and maintain accurate records<br><br>Good analytical and organizational skills<br><br>Previous Inventory Experience Is Preferred<br><br>Main Role: Manage inventory, stock records, and inventory reporting using ERP and Advanced Excel.<br><br>Basic Details<br><br>Location : Shuwaikh , Kuwait<br><br>Download Interactive Maps<br><br>Qualification<br><br>Posted : 2 days ago<br><br>Job Type : Full-Time<br><br>Company : Karyan Group<br><br>Posted By: masoud herami<br><br>Contact Info<br><br>Mobile : +965 96690131<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : karyanservice@gmail.com

<ul><li>Install, repair, and maintain piping systems for various applications including water, gas, and steam.</li><li>Read and interpret blueprints and technical drawings to determine the layout of piping systems.</li><li>Measure and cut piping materials to precise specifications using specialized tools and equipment.</li><li>Ensure all installations comply with local codes and regulations, maintaining a high standard of safety.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent; vocational training in plumbing or pipe fitting is preferred.</li><li>Minimum of 3 years of proven experience in pipe fitting, preferably in industrial or commercial settings.</li><li>Relevant certifications, such as a Pipefitter Certification or Journeyman License, are highly desirable.</li><li>Experience with various pipe materials, including PVC, copper, and steel, showcasing versatility.</li></ul>

<p>Company : Leading company in Kuwait</p><p>Position : Electrical Design Engineer</p><p>Qualification : B.E/B.Tech in Electrical Engineering</p><p>Location : Kuwait</p><p>Salary : 600 - 700 KWD</p><p>Experience : Min 5 years</p><p>Company provides : Free Food, Accommodation &amp; local transportation</p><p>Interview mode : Online Interview</p><p>Job Description: Substation Design (Up to 400 kV), Review and develop, Single Line Diagrams (SLD), Protection schemes, Equipment layouts Coordinate GIS / AIS design requirements Ensure compliance with IEC and utility standards underground Cable Systems Design and review HV/EHV cable systems (up to 400 kV) Evaluate: Cable sizing, routing, and installation methods, Jointing and termination requirements Support technical submissions and approvals Overhead Transmission Lines Review and support design of OHL systems up to 400 kV</p><p><strong>Desired Candidate Profile</strong></p><p>Qualification : B.E/B.Tech in Electrical Engineering</p><p>Experience : Min 5 years</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing calibration procedures and required functional tests in support of the KAF 4790 manual series. Responsibilities Overview The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities include maintenance and serviceability procedures for subsystem components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of airframes and power plants engineering principles, techniques, and methods in the maintainability of existing equipment and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Major Job Activities Description: · Apply and provide a thorough working knowledge of airframes and power plant systems to include aircraft modification procedures and experience with specific airframe, hydraulic, engine, and propeller systems, systems integration, system/component failure analysis, inspection, repair, and testing of airframes and power plant systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. · Performance abilities include performance of maintenance and servicing related aircraft components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation and incorporates applicable technical directives and bulletins. · Troubleshoots and/or repairs malfunctions in the aircraft airframes and power plants systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J MRC/MIMs, to include performing calibration procedures and required functional tests. · Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. · Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components · Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. · Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer’s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. · Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. · Performs applicable “O” and “I” level maintenance functions in support of In-Flight Refueling Systems and rebuild shop and Aircraft Tire &amp; Wheel rebuilding. · Perform scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment, pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated airframes and power plants equipment systems. · Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. · Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/ · Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures · When necessary, perform other duties and supervisory functions, critical to the function of the program and to assure compliance with the Performance Work Statement (PWS). Material &amp; Equipment Directly Used Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arm Qualifications EDUCATION and/or EXPERIENCE: Graduation from a standard four (4) year high school or equivalent (GED) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (https://www.eeoc.gov/poster) notice from the Department of Labor.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Conducts VTC conferences, operates VTC equipment such as VTC conferencing equipment, consoles, Digital Video Recorders (DVD), cameras, microphones, desktop and laptop computers supporting VTC events. Reports to the Site Manager as required. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver’s license in order to be qualified for this position. Responsibilities + Coordinates with customer to endure equipment is operational. + Sets-up and operates VTC equipment. + Establishes end to end secure and non-secure connectivity to support conferences. + Establishes proper cable connection and routing to various Audio/Video and communication links. + Adjusts sound and light levels for optimum performance of equipment and comfort of customers. + Troubleshoots VTC and connectivity problems with local and distant end technical control facilities and help-desks to restore communication and resolve poor reception/transmission issues. + Troubleshoots equipment; configures modems and data timing and transfer rates. + Resolves connectivity problems with technical personnel. + Performs weekly maintenance on all associated VTC equipment. + Operates, administers, and maintains the VTC Bridge. Required to manipulate the bridge to provide technical support for all VTC circuits attached. + Performs other duties and assignments as required. Qualifications + Qualifications + Security Clearance: + Requires an active Secret Clearance + Education/Certifications: One year related experience may be substituted for one year of education, if degree is required. + High School diploma or GED required. + Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience. + Requires a minimum of 5 years experience in Video Teleconferencing or Audio Video Productions. + Must be able to work rotating shift schedules which provide 24 hour day/7 day week coverage. + Experience with a customer service-oriented company. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p>Urgent Hiring We are looking for experienced candidates for the following positions.</p><p><strong>Desired Candidate Profile</strong></p><p>Relevant experience in AV systems and technical support</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Scope of work:</b></p><p>Technical Support Engineer is responsible for providing technical assistance, troubleshooting hardware and software issues, and ensuring the smooth operation of IT systems and end-user support.</p><p><br></p><p><b>Key Responsibilities:</b></p><ul><li>Provide technical support and services for ID Card Printers.</li><li>Provide first and second-level technical support for hardware, software, and network-related issues.</li><li>Install, configure, and maintain desktop computers, laptops, printers, scanners, and other IT peripherals.</li><li>Install, configure, and troubleshoot operating systems, applications, and business software.</li><li>Respond to user support requests via phone, email, ticketing systems, or in person within agreed service levels.</li><li>Diagnose and resolve hardware, software, network, and connectivity issues.</li><li>Configure and maintain user accounts, email accounts, and access permissions.</li><li>Monitor system performance and ensure the availability of IT infrastructure.</li><li>Perform preventive maintenance, system updates, and software patch installations.</li><li>Escalate complex technical issues to senior engineers or vendors when necessary.</li><li>Maintain accurate records of incidents, service requests, and resolutions in the helpdesk system.</li><li>Support LAN/WAN connectivity, Wi-Fi networks, VPN access, and basic network troubleshooting.</li><li>Assist in the deployment of new hardware, software, and IT infrastructure projects.</li><li>Ensure compliance with IT security policies, antivirus protection, and data backup procedures.</li><li>Provide user training and guidance on IT systems, software applications, and cybersecurity best practices.</li><li>Coordinate with vendors for equipment repairs, warranty claims, and technical support.</li><li>Prepare technical documentation, user manuals, and system configuration records.</li><li>Participate in disaster recovery and business continuity activities as required.</li><li>Perform any other IT support duties assigned by the IT Manager or management</li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Education:</b></p><ul><li>Bachelor’s degree in IT/ Computer Science / Engineering&nbsp;</li></ul><p><br></p><p><b>Qualifications and Skills:</b></p><ul><li>Knowledge of Windows operating systems, Microsoft 365, Active Directory, networking, and troubleshooting hardware. </li><li>Familiarity with ticketing systems and remote support tools. </li><li>Strong analytical, problem-solving, and communication skills. </li><li>Ability to work independently and provide excellent customer service</li><li>Bachelor’s degree in IT/ Computer Science / Engineering </li><li>Must be a certified engineer from the submitted ID card printer manufacturer.</li><li>CCNP certificate.</li><li>Certified in servers' administration.</li></ul><p><br></p><p><b>Experience:</b></p><ul><li>3–5 years of experience in technical support or IT helpdesk operations. </li><li>Must have a minimum of 5 years' experience in ID card Printers Hardware &amp; software Deployment &amp; Maintenance.</li></ul><p><br></p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an experienced and results-driven <strong> HVAC Sales Engineer</strong> to join our growing team in <strong>Kuwait</strong>. The ideal candidate will have a strong background in HVAC project sales and business development, with proven experience selling Air Conditioning systems including <strong>Split AC, Ducted AC, Window AC, VRF/VRV systems</strong>, and related MEP solutions within the <strong>Kuwait/GCC market</strong>.</p><p>This role requires a proactive sales professional who can identify project opportunities, build strong relationships with contractors, consultants, developers, and end-users, and drive sustainable revenue growth.</p><p>Key Responsibilities</p><ul><li><p>Drive sales of Split AC, Window AC, Ducted AC Systems, VRF/VRV Systems, and associated MEP products for projects.</p></li><li><p>Generate new business through market visits, client meetings, networking, and business development activities.</p></li><li><p>Identify potential accounts and develop relationships with MEP contractors, consultants, developers, and project clients.</p></li><li><p>Promote and sell HVAC products along with related MEP solutions based on customer and project requirements.</p></li><li><p>Manage project sales opportunities and actively follow up on leads to achieve monthly and annual sales targets.</p></li><li><p>Build and maintain strong customer relationships to support long-term business growth.</p></li><li><p>Monitor market trends, competitor activities, and emerging project opportunities.</p></li><li><p>Coordinate with engineering, estimation, and project teams to ensure successful project execution and customer satisfaction.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum <strong>2-3 years of Kuwait/GCC experience</strong> in HVAC/AC project sales.</p></li><li><p>Strong experience in selling <strong>Split AC, Window AC, Ducted AC, and VRF/VRV Systems</strong>.</p></li><li><p>Previous experience working with reputed HVAC/AC brands is highly preferred.</p></li><li><p>Engineering background preferred.</p></li><li><p>Proven track record in business development, project sales, and customer relationship management.</p></li><li><p>Strong network with MEP contractors, consultants, developers, and project owners in Kuwait is an advantage.</p></li><li><p>Excellent communication, negotiation, and presentation skills.</p></li><li><p>Ability to work independently and drive sales growth.</p></li><li><p>Valid Kuwait Driving License is preferred.</p></li></ul><p>Preferred Qualifications</p><ul><li><p>Bachelor's degree in Mechanical Engineering, Electrical Engineering, or a related engineering field.</p></li><li><p>Experience in project sales of HVAC/AC equipment within the <strong>Kuwait market</strong>.</p></li><li><p>Familiarity with <strong>Kuwait Municipality regulations</strong>, local MEP standards, and HVAC installation practices.</p></li><li><p>Knowledge of project cost estimation, BOQ analysis, tendering, and contract documentation.</p></li><li><p>Experience using CRM software and preparing technical and commercial proposals.</p></li></ul><p></p></section>

<p>Perform installation, maintenance and repair of telecommunications systems. Leverage an intermediate level of experience to perform inside/outside cable plant work.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High School Diploma/GED Required</li><li>3 - 5 years of related experience Required</li><li>Certification: Security+ CE</li><li>Installation of ducts and conduits, pulling cables, and terminating, testing, splicing, and repairing interior and outside copper, coaxial, and fiber optic cabling</li><li>Installation of fiber optic modems, fiber multiplex equipment, fiber patch panels, analog and digital copper patch panels, main and intermediate distribution frames,</li><li>Installation of lightning protection and supporting ground and power connections</li><li>Installation of cabinets, cable ladder and rack systems, and equipment components in the cabinets</li><li>Security Clearance Level: SECRET</li><li>Experience with the operation of heavy equipment as specified in the task order to include: track excavator-changeable scoop/hydraulic jackhammer, standard backhoe, bobcat, cable reel truck, and 20K all- terrain forklift</li><li>Location: On Customer Site</li><li>US Citizenship Required</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The suitable candidate should have a minimum of 12 years of relevant designs, installs, and maintains cathodic protection systems to prevent corrosion of pipelines, storage tanks, and other metallic structures. They conduct corrosion surveys, monitor system performance, and perform testing to ensure effective protection. The role involves troubleshooting CP systems, preparing technical reports, and ensuring compliance with industry standards. They work extensively in the oil &amp; gas, petrochemical, marine, and infrastructure sectors.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>12+ Years experience required </p><p>Candidate available within Kuwait preferred</p><p></p></section>

<p>Familiar with and knowledgeable in Permit to Work (PTW) systems applicable to Oil &amp; Gas operations. Responsible for overseeing and executing all field instrumentation activities (Fire Alarm, Gas Detection, and Fire Suppression Systems and Load shifting), including installation, testing, pre-commissioning, and commissioning during the construction phase. Verify that all activities are carried out in compliance with IFC drawings, approved method statements, and Inspection Test Plans (ITPs). Supervise instrumentation works such as cable pulling, cable termination, tubing installation, junction box installation, and panel wiring activities. Coordinate and assign daily work activities to subcontractors and submit daily progress reports to the Engineer. Ensure the safe installation, testing, and commissioning of instrumentation and control systems, including field devices, control panels, junction boxes, and cabling, in accordance with approved drawings and project specifications. Ensure proper segregation and routing of signal, control, and power cables during installation. Witness and support functional testing, loop checking, and pre-commissioning activities in coordination with QA/QC and commissioning teams. Assist in the preparation, tracking, and closure of punch list items arising from inspections, pre-commissioning, and commissioning activities. Maintain red-line mark-up drawings and support the design team during as-built documentation, loop folders, and handover dossiers. Coordinate closely with electrical, mechanical, and process disciplines to ensure smooth execution of multidisciplinary activities. Work in collaboration with the commissioning team to plan and execute system energization and loop testing activities. Ability to Supervise the load shifting of DCS, ESD. Liaise with client representatives to facilitate inspections, obtain approvals, and provide progress updates.</p>

<p><h4>Company description</h4> <p>Join a hotel that is a member of the Accor network, whose group brings together more than 45 brands, 5,500 hotels, 10,000 restaurants and lifestyle destinations. Here, we believe in you and what you bring to the table. There are many opportunities for development and advancement. Every gesture, every smile, every action, contributes to creating a positive and memorable impact for our customers, our colleagues and also for our planet. Together, we embody the vision of responsible hospitality.</p> <p>Take the opportunity to become a Heartist®, and let your heart guide you in this world where life beats faster.</p> <h4>Job description</h4> <p><strong>The mission</strong></p> <p>You are the digital heartbeat of Mama — ensuring our technology runs smoothly, our teams stay connected, and our guests enjoy a seamless experience powered by reliable systems.</p> <p>As our IT Coordinator, you’ll play a key role in supporting the technology operations of Mama Shelter Cape Town during its pre-opening journey and beyond. Working closely with the IT team, hotel departments, and Ennismore support functions, you’ll help establish, maintain, and optimise the systems that keep Mama running.</p> <p>Here’s what you’ll be responsible for:</p> <ul> <li><strong>Technology support champion</strong> – Provide day-to-day IT support to hotel colleagues, troubleshooting hardware, software, network, and system-related issues to ensure smooth operations.</li> <li><strong>Systems guardian</strong> – Support the setup, maintenance, and effective use of hotel technology systems, ensuring reliability and alignment with Mama and Ennismore standards.</li> <li><strong>Pre-opening IT support</strong> – Assist with IT setup, system installations, user access, hardware deployment, and technology readiness ahead of Mama Shelter Cape Town’s opening.</li> <li><strong>User experience partner</strong> – Support colleagues across all departments by providing timely solutions, guidance, and training on IT systems and tools.</li> <li><strong>Cybersecurity advocate</strong> – Follow and promote IT security standards, data protection practices, access controls, and company policies to safeguard hotel information.</li> <li><strong>Hardware and asset controller</strong> – Maintain accurate records of IT equipment, support inventory management, and ensure all technology assets are properly maintained.</li> <li><strong>Vendor and support coordination</strong> – Coordinate with external IT providers and vendors to resolve issues and ensure effective delivery of technology services.</li> <li><strong>Systems and application support</strong> – Support key hospitality systems including PMS, POS, network platforms, and business applications to ensure operational continuity.</li> <li><strong>Team player with curiosity</strong> – Bring a proactive mindset, problem-solving approach, and passion for technology to support Mama’s vibrant and fast-paced environment.</li> </ul> <p>At Mama Shelter Cape Town, technology is at the heart of creating effortless experiences — and you’ll help ensure Mama’s teams stay connected, supported, and ready to deliver unforgettable moments.</p> <h4>Qualifications</h4> <ul> <li>Bachelor's degree or diploma in Information Technology, Computer Science, or a related field.</li> <li>Previous experience in IT support, help desk, system administration, or a similar role.</li> <li>Experience within a hotel, resort, or hospitality environment is advantageous.</li> <li>Knowledge of computer hardware, software, networking, and troubleshooting techniques.</li> <li>Familiarity with Microsoft Windows environments, basic server administration, and network infrastructure.</li> <li>Experience with hospitality systems and applications is preferred.</li> <li>Proficiency in Microsoft Office applications and IT support tools.</li> <li>Strong technical troubleshooting and problem-solving skills.</li> <li>Excellent communication and customer service abilities.</li> <li>Strong organisational skills with attention to detail.</li> <li>Ability to manage multiple priorities in a fast-paced environment.</li> <li>Commitment to maintaining data security, confidentiality, and operational reliability.</li> </ul> <h4>Additional information</h4> <p><strong>Your team and working environment:</strong></p> <p>In one to two sentences, introduce the team, property or office environment in a way that reflects the culture.</p> <p><strong>Our commitment to diversity and inclusion:</strong></p> <p>We are an inclusive company and our ambition is to attract, recruit and promote diverse talent.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Electronica for Electrical Appliances is a Kuwait-based company providing integrated solutions across Electrical Appliances and Renewable Energy, with a focus on reliable products, professional engineering, and technical support.</p><p>Electronica is seeking a <b>Solar Energy Technician </b>to join its team in Kuwait.</p><p><br></p><p><b>Key Responsibilities</b></p><p><b><span></span></b></p><ul><li>Install solar panels on rooftops and ground-mounted structures. </li><li>Install mounting systems and ensure correct panel angles and orientation. </li><li>Install and connect DC cables between solar panels. </li><li>Install inverters, protection panels, and related electrical components. </li><li>Assist with system testing, commissioning, and safety checks. </li><li>Perform solar panel cleaning and routine preventive maintenance. </li><li>Follow all site safety procedures and technical guidelines.&nbsp;</li></ul><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Diploma or technical certification in solar energy, electrical technology, or a related field. </li><li>Minimum 2 years of experience in solar PV installation or maintenance. </li><li>Basic knowledge of electrical systems and solar PV components. </li><li>Ability to work outdoors and safely at heights. </li><li>Reliable, disciplined, and able to work effectively as part of a team.</li></ul><p><br></p></div>

<p>The Data Center Electrical Engineer is responsible for the engineering-level ownership, reliability, safety, and performance of the data center electrical power infrastructure, from the utility intake through to the rack level. The role manages electrical maintenance strategy, switching procedures, electrical safety programs, vendor activities, spare parts planning, and system performance. The Electrical Engineer also directs the electrical manning technicians, authorizes and leads critical switching operations, and acts as the electrical authority during incidents and escalations.</p><p>Key Responsibilities</p><ul><li>Take engineering ownership of the data center electrical infrastructure, including MV/LV distribution systems, HV/MV switchgear, GIS/AIS, transformers, RMUs, UPS systems, STS/ATS systems, generators, fuel systems, batteries, and protection systems.</li><li>Develop, maintain, and control electrical switching procedures.</li><li>Authorize, lead, and supervise HV/MV and critical LV switching operations.</li><li>Manage the arc flash and electrical safety program for the data center.</li><li>Ensure full compliance with Lockout/Tagout, LOTO, Permit to Work, PTW, and electrical isolation requirements.</li><li>Develop and manage the annual electrical Planned Preventive Maintenance, PPM, program in line with OEM recommendations.</li><li>Coordinate generator load-bank testing and generator readiness programs in accordance with NFPA 110.</li><li>Prepare, review, and maintain electrical Standard Operating Procedures, SOPs, Methods of Procedure, MOPs, and Emergency Operating Procedures, EOPs.</li><li>Review and approve the safe execution of electrical procedures and maintenance activities.</li><li>Coordinate electrical maintenance vendors and supervise OEM major services, testing, repairs, and equipment overhauls.</li><li>Develop and maintain the spare-parts and critical-inventory plan for electrical systems.</li><li>Analyze electrical system performance, protection settings, load profiles, power usage, and equipment capacity.</li><li>Identify and implement opportunities for energy optimization and improved electrical system performance.</li><li>Lead root cause analysis for electrical faults, failures, alarms, and service interruptions.</li><li>Develop and follow up corrective and preventive actions arising from electrical incidents.</li><li>Direct, support, develop, and train the electrical manning technicians.</li><li>Support integrated systems testing, testing and commissioning, and electrical system readiness activities.</li><li>Support predictive maintenance programs, including thermography, transformer oil sampling, and condition monitoring.</li><li>Act as the electrical technical authority during incidents, emergencies, and operational escalations.</li><li>Provide 24/7 on-call support and shift coverage assistance when required.</li></ul><p>Minimum Qualifications</p><ul><li>Bachelor s degree in Electrical Engineering.</li><li>Minimum of five years of experience in electrical operations and maintenance involving MV/LV electrical systems.</li><li>At least two years of experience in a data center, critical facility, industrial facility, or similarly high-availability environment.</li><li>Practical experience with HV/MV switching and critical LV switching operations.</li><li>Working knowledge of electrical protection systems, switching procedures, isolation practices, and electrical safety requirements.</li><li>Working knowledge of generator control systems such as DeepSea, ComAp, or Woodward.</li><li>Familiarity with NFPA 110 and applicable NEC references.</li><li>Demonstrated experience in electrical maintenance planning, technical procedure writing, and vendor management.</li><li>Strong technical reporting and documentation skills.</li><li>Fluency in written and spoken English.</li></ul><p>Preferred Qualifications and Certifications</p><ul><li>HV/MV switching authorization or license issued or recognized by the relevant GCC regulatory authority.</li><li>OEM training or certification related to UPS and critical-power systems from Schneider Electric, Eaton, Vertiv, ABB, or an equivalent manufacturer.</li><li>OEM training or certification related to MV/LV switchgear and protection systems from Schneider Electric, ABB, Siemens, Eaton, or an equivalent manufacturer.</li><li>OEM training or certification related to generators from Caterpillar, Cummins, MTU, Rolls-Royce, Kohler, SDMO, or an equivalent manufacturer.</li><li>OEM training or certification related to STS, ATS, and power-distribution systems from Vertiv, ABB, Eaton, Socomec, or an equivalent manufacturer.</li></ul><p>Other Requirements</p><ul><li>Willingness to work in a critical data center environment.</li><li>Availability for 24/7 on-call support.</li><li>Ability to support shift coverage, planned maintenance, emergency response, and critical switching activities.</li><li>Ability to coordinate with operations, facilities, safety, vendors, and OEM service teams.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in Electrical Engineering.</li><li>Minimum of five years of experience in electrical operations and maintenance involving MV/LV electrical systems.</li><li>At least two years of experience in a data center, critical facility, industrial facility, or similarly high-availability environment.</li><li>Practical experience with HV/MV switching and critical LV switching operations.</li><li>Working knowledge of electrical protection systems, switching procedures, isolation practices, and electrical safety requirements.</li><li>Working knowledge of generator control systems such as DeepSea, ComAp, or Woodward.</li><li>Familiarity with NFPA 110 and applicable NEC references.</li><li>Demonstrated experience in electrical maintenance planning, technical procedure writing, and vendor management.</li><li>Strong technical reporting and documentation skills.</li><li>Fluency in written and spoken English.</li><li>HV/MV switching authorization or license issued or recognized by the relevant GCC regulatory authority.</li><li>OEM training or certification related to UPS and critical-power systems from Schneider Electric, Eaton, Vertiv, ABB, or an equivalent manufacturer.</li><li>OEM training or certification related to MV/MV switchgear and protection systems from Schneider Electric, ABB, Siemens, Eaton, or an equivalent manufacturer.</li><li>OEM training or certification related to generators from Caterpillar, Cummins, MTU, Rolls-Royce, Kohler, SDMO, or an equivalent manufacturer.</li><li>OEM training or certification related to STS, ATS, and power-distribution systems from Vertiv, ABB, Eaton, Socomec, or an equivalent manufacturer.</li><li>Willingness to work in a critical data center environment.</li><li>Availability for 24/7 on-call support.</li><li>Ability to support shift coverage, planned maintenance, emergency response, and critical switching activities.</li><li>Ability to coordinate with operations, facilities, safety, vendors, and OEM service teams.</li></ul>