Cctv Jobs

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Role Summary: </b>Responsible for conducting microbiological testing and quality monitoring of raw materials, water, in-process products, and finished goods to ensure compliance with food safety, quality, and regulatory standards in a water, juice, or dairy manufacturing environment.</p><p><b>Key Responsibilities:</b></p><ul><li>Perform microbiological testing of raw materials, water, in-process, and finished products. </li><li>Conduct environmental monitoring, sterility testing, and pathogen analysis. </li><li>Monitor and verify CIP/SIP systems and aseptic processing. </li><li>Investigate microbiological deviations and implement corrective actions (CAPA). </li><li>Maintain laboratory equipment calibration and accurate testing records. </li><li>Prepare laboratory reports and support internal and external audits. </li><li>Ensure compliance with GMP, HACCP, FSSC 22000, and company quality standards</li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Qualifications</b></p><ul><li>Bachelor's Degree in Microbiology, Food Science, Biotechnology, Chemistry, Biological Sciences, or a related field. </li></ul><p><b>Experience</b></p><ul><li><b>3–5 years</b> of experience as a Quality Control Microbiologist in <b>water, juice, dairy, milk, or beverage manufacturing</b>. </li><li>Strong experience in <b>UHT processing</b>, aseptic manufacturing, microbiological testing, and food safety systems (HACCP, FSSC 22000, GMP).</li></ul><p><br></p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Candidates must have relevant experience in Substation and/or Overhead Transmission Line projects, either in India or internationally.</p></li><li><p>Develop and implement comprehensive safety programs tailored to Indian regulatory standards and workplace environments.</p></li><li><p>Conduct thorough hazard identification and risk assessments (HIRA) for all operational activities, focusing on potential Indian workplace hazards.</p></li><li><p>Investigate all accidents, near misses, and unsafe conditions, determining root causes and implementing corrective and preventive actions.</p></li><li><p>Ensure compliance with all relevant Indian safety legislation, including the Factories Act, and other applicable regulations.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Engineering (Mechanical, Chemical, Civil, Electrical) or equivalent.</p></li><li><p>The engineering college and the relevant discipline must be accredited by the National Board of Accreditation (NBA).</p></li><li><p>Possession of a relevant professional safety certification (e.g., NEBOSH IGC, IOSH, or Indian equivalent).</p></li><li><p>Minimum of 5 years of progressive experience in safety engineering within the Indian industrial sector.</p></li><li><p>Proven experience in implementing and managing OHSAS 18001/ISO 45001 management systems.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Previous experience in data entry, administration, or similar roles is an advantage.</p></li><li><p>We are seeking a detail-oriented and reliable Data Entry Clerk to join our operations team. This role is ideal for individuals who are accurate, organized, and comfortable working with structured digital tasks in a remote environment.</p><p>You will be responsible for maintaining high-quality data records, ensuring accuracy, and supporting smooth day-to-day operations through efficient data handling.</p><p>Responsibilities</p><ul><li><p>Enter, update, and maintain data across company systems and databases accurately.</p></li><li><p>Review information for errors, inconsistencies, or missing details and correct them when required.</p></li><li><p>Organize and prepare data for reporting and operational use.</p></li><li><p>Ensure confidentiality and proper handling of sensitive information.</p></li><li><p>Complete assigned daily and weekly tasks within deadlines while maintaining accuracy.</p></li><li><p>Support basic document formatting and data organization using Microsoft Word and similar tools.</p></li></ul></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>The position details will be shared via Telegram. Interested parties are requested to contact us on Telegram using the username provided below:Mathew_Gerrad</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Hiring Engineers – Kuwait</p><p>A leading contracting company in Kuwait is currently seeking qualified candidates for the following positions:</p><p><b>1. HVAC Engineer</b></p><p><b>Requirements:</b></p><p>Bachelor's Degree in Mechanical Engineering.</p><p><b>5–7 years</b> of experience in HVAC systems.</p><p>Experience in construction and maintenance projects.</p><p>Strong technical and communication skills.</p><p><b>2. Civil Engineer</b></p><p><b>Requirements:</b></p><p>Bachelor's Degree in Civil Engineering.</p><p><b>10 years or more</b> of relevant experience.</p><p>Experience in construction and infrastructure projects.</p><p>Strong leadership, site management, and project coordination skills.</p><p>Preferred Qualifications:</p><p>Transferable residency in Kuwait.</p><p>Membership in the Kuwait Society of Engineers (preferred).</p><p>Immediate joining is an advantage.</p><p>Interested candidates are invited to submit their updated CV through Bayt.com.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Required Skills</p><ul><li>Bachelor's Degree in the relevant engineering discipline.</li><li>Relevant work experience as per the job requirements.</li><li>Ability to read and interpret engineering drawings and specifications.</li><li>Familiarity with engineering standards and technical specifications.</li><li>Proficiency in Microsoft Office applications.</li><li>Strong communication and teamwork skills.</li><li>Ability to work under pressure and meet project deadlines.</li><li>Strong problem-solving and decision-making skills.</li><li>Transferable Residency in Kuwait (Article 18).</li><li>Valid Membership of the Kuwait Society of Engineers.</li><li>Immediate joiners are preferred.</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Skills and Behavioral Competencies</b></p><p><b>Communication:</b></p><ul><li><b></b>The ability to communicate effectively verbally and in writing with employees and customers at all levels.</li><li> Effective communication with others (co-workers, supervisors, and other departments) through providing and exchanging information.</li></ul><p><b>Professional Skills and Abilities:</b></p><ul><li> Attention to detail and the ability to analyze results.</li><li> Good understanding of quality control procedures and international, local, and regional standards applicable to the food industry.</li><li> Attention to product details and accuracy of observation to detect any errors or defects that deviate from the agreed standards within the company.</li><li> Ability to handle responsibilities with precision.</li><li> Ability to research, analyze, create data, and statistics.</li><li> Ability to write and explain information and prepare professional reports.</li><li> Commitment to professionalism and objectivity.</li><li> Possession of organizational skills to arrange tasks.</li><li> Ability to apply logical analytical skills.</li><li> Quality and excellence in achieving tasks with results and specified quality standards.</li><li> Optimal interaction with the company's work team and mastery of work while maintaining company property and confidentiality.</li><li> Good knowledge of the company's operations and has alertness and strong observation skills.</li></ul><p><br></p><p><b>Tasks and Responsibilities</b></p><ul><li> Implementing policies and procedures of the work department according to the requirements of each of the applicable quality systems in the company, governance, and best practices.</li><li> Directly supporting the implementation of policies related to Total Quality Management (TQM) systems in coordination with the direct supervisor.</li><li> Executing all stages of approved departmental work programs and quality initiatives.</li><li> Maintaining and updating the quality management information database for future reference and reporting.</li><li> Using approved electronic systems to manage and improve quality data and information.</li><li> Monitoring departmental Key Performance Indicators (KPIs), tracking achievement rates, and preparing performance reports for the direct supervisor.</li><li> Ensuring quality awareness guidelines, policies, and instructions are properly communicated and displayed in designated areas.</li><li> Monitoring the implementation of quality management policies and procedures in accordance with the latest applicable international standards and requirements.</li><li> Analyzing quality-related data, statistics, and performance indicators and submitting findings to the direct supervisor.</li><li> Identifying and documenting operational non-conformities through <b>Non-Conformance Reports (NCRs)</b>.</li><li> Monitoring the implementation of approved corrective and preventive actions related to identified non-conformities.</li><li> Conducting compliance checks to ensure adherence to the company's applicable quality management standards and procedures.</li><li> Supporting departments and production facilities during internal quality audits and following up on audit requirements to ensure compliance.</li><li> Monitoring the company's quality documentation and forms management system to ensure all departments are using the latest approved versions of procedures, policies, and quality forms.</li><li> Monitoring product quality and identifying any defects or deviations from established company standards.</li><li> Preparing and submitting quality-related reports to the direct supervisor, including:</li><li> Quality Control Reports</li><li> Non-Conformance Reports (NCRs)</li><li> Quality Objectives Reports</li><li> KPI Analysis Reports</li><li> Quality Performance Reports</li><li> Other reports related to quality management activities.</li><li> Supporting continuous improvement initiatives by identifying trends, potential risks, and opportunities for improving quality performance.</li><li> Performing any other duties within the scope of the position as assigned by the supervisor.</li></ul><p>Required Skills &amp; Competencies</p><ul><li> Good understanding of quality control procedures and international, local, and regional standards applicable to the food industry.</li><li> Strong attention to detail and ability to identify product defects or deviations from established quality standards.</li><li> Strong analytical and logical thinking skills.</li><li> Ability to collect, analyze, and interpret data and statistics.</li><li> Ability to prepare professional reports and clearly communicate technical information.</li><li> Strong organizational and time-management skills.</li><li> High level of accuracy, accountability, and attention to detail.</li><li> Professional, objective, and ethical approach.</li><li> Strong observation and problem-solving skills.</li><li> Good knowledge of company operations and quality requirements.</li><li> Ability to work effectively with different departments and teams.</li><li> Ability to maintain company confidentiality and protect company property.</li></ul><p>Language Requirements</p><ul><li> Ability to communicate effectively in <b>Arabic or English</b>, both verbally and in writing.</li></ul><p>Educational Qualifications &amp; Experience</p><p><b>Educational Qualifications:</b></p><ul><li>Bachelor's degree in <b>Science or Engineering</b>, or equivalent.</li><li>Diploma in <b>Science or Engineering</b>.</li><li> Preferably, professional certifications in the following areas:</li><li><b>Quality Management Systems – ISO 9001 Lead Auditor</b></li><li><b>Lean Six Sigma</b></li><li><b>Total Quality Management (TQM)</b></li><li><b>Environmental Management System (EMS)</b></li><li><b>Food Safety Management System – ISO 22000</b></li><li><b>FSSC 22000</b></li><li><b>ISO 45001</b></li><li><b>ISO 14001</b></li><li><b>HACCP</b></li><li><b>VACCP</b></li><li><b>TACCP</b></li><li><b>Halal</b></li><li><b>GMP</b></li></ul><p><b>Experience:</b></p><ul><li>Bachelor's degree: <b>Minimum 5 years of experience</b> in the food manufacturing industry, preferably in a government entity.</li><li>Diploma: <b>Minimum 3 years of experience</b> in the food manufacturing industry, preferably in a government entity.</li></ul><p><br></p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Job Summary</p><p>Responsible for monitoring and implementing quality management policies and procedures across the company, particularly within food industry operations. The role involves analyzing quality data, monitoring compliance, identifying non-conformities, supporting corrective actions, maintaining quality documentation, and preparing reports to ensure adherence to established quality standards and continuous improvement objectives.</p><p>Key Responsibilities</p><ul><li>Implement department policies and procedures in accordance with the company's quality management systems, governance requirements, and best practices.</li><li>Support the implementation and maintenance of Total Quality Management (TQM) systems in coordination with the direct supervisor.</li><li>Execute approved departmental work programs and quality initiatives.</li><li>Maintain and update the quality management information database for future reference and reporting.</li><li>Use approved electronic systems to manage and improve quality data and information.</li><li>Monitor departmental Key Performance Indicators (KPIs), track achievement rates, and prepare performance reports for the direct supervisor.</li><li>Ensure quality awareness guidelines, policies, and instructions are properly communicated and displayed in designated areas.</li><li>Monitor the implementation of quality management policies and procedures in accordance with the latest applicable international standards and requirements.</li><li>Analyze quality-related data, statistics, and performance indicators and submit findings to the direct supervisor.</li><li>Identify and document operational non-conformities through <b>Non-Conformance Reports (NCRs)</b>.</li><li>Monitor the implementation of approved corrective and preventive actions related to identified non-conformities.</li><li>Conduct compliance checks to ensure adherence to the company's applicable quality management standards and procedures.</li><li>Support departments and production facilities during internal quality audits and follow up on audit requirements to ensure compliance.</li><li>Monitor the company's quality documentation and forms management system to ensure all departments are using the latest approved versions of procedures, policies, and quality forms.</li><li>Monitor product quality and identify any defects or deviations from established company standards.</li><li>Prepare and submit quality-related reports to the direct supervisor, including:</li><li>Quality Control Reports</li><li>Non-Conformance Reports (NCRs)</li><li>Quality Objectives Reports</li><li>KPI Analysis Reports</li><li>Quality Performance Reports</li><li>Other reports related to quality management activities.</li><li>Support continuous improvement initiatives by identifying trends, potential risks, and opportunities for improving quality performance.</li><li>Perform any other duties within the scope of the position as assigned by the supervisor.</li></ul><p>Required Skills &amp; Competencies</p><ul><li>Good understanding of quality control procedures and international, local, and regional standards applicable to the food industry.</li><li>Strong attention to detail and ability to identify product defects or deviations from established quality standards.</li><li>Strong analytical and logical thinking skills.</li><li>Ability to collect, analyze, and interpret data and statistics.</li><li>Ability to prepare professional reports and clearly communicate technical information.</li><li>Strong organizational and time-management skills.</li><li>High level of accuracy, accountability, and attention to detail.</li><li>Professional, objective, and ethical approach.</li><li>Strong observation and problem-solving skills.</li><li>Good knowledge of company operations and quality requirements.</li><li>Ability to work effectively with different departments and teams.</li><li>Ability to maintain company confidentiality and protect company property.</li></ul><p>Language Requirements</p><ul><li>Ability to communicate effectively in <b>Arabic or English</b>, both verbally and in writing.</li></ul><p>Educational Qualifications &amp; Experience</p><p><b>Educational Qualifications:</b></p><ul><li>Bachelor's degree in <b>Science or Engineering</b>, or equivalent.</li><li>Diploma in <b>Science or Engineering</b>.</li><li>Preferably, professional certifications in the following areas:</li><li><b>Quality Management Systems – ISO 9001 Lead Auditor</b></li><li><b>Lean Six Sigma</b></li><li><b>Total Quality Management (TQM)</b></li><li><b>Environmental Management System (EMS)</b></li><li><b>Food Safety Management System – ISO 22000</b></li><li><b>FSSC 22000</b></li><li><b>ISO 45001</b></li><li><b>ISO 14001</b></li><li><b>HACCP</b></li><li><b>VACCP</b></li><li><b>TACCP</b></li><li><b>Halal</b></li><li><b>GMP</b></li></ul><p><b>Experience:</b></p><ul><li>Bachelor's degree: <b>Minimum 5 years of experience</b> in the food manufacturing industry, preferably in a government entity.</li><li>Diploma: <b>Minimum 3 years of experience</b> in the food manufacturing industry, preferably in a government entity.</li></ul><p><br></p><p><br></p><p><br></p></div>

<p>Date Posted: 2026-08-12</p><p>This position is located in Kuwait.</p><p>What You Will Do : The Patriot Power Generation Frequency Converter Maintenance Technician supports the Kuwait Air Defense Force (KADF) Patriot program. Participates in power frequency convertor improvement and repair on the KADF Patriot systems. Shall be responsible for the repair and maintenance of all generators to include installation, Preventive Maintenance Checks and Services (PMCS), and operations. Will also coordinate with generators in the daily operations, repair, maintenance, PMCS, and generator fueling. Provides technical and engineering advice to the KADF Patriot program leadership. Participate in preventive maintenance operations at all maintenance levels. Performs troubleshooting, fault isolation and field maintenance repair for all frequency convertors for all systems. Functionally tests power frequency convertors after making repairs to assure compliance with design specifications and standards. Participates in the opening and closing of work orders and in on-the-job training (OJT). Implements approved engineering changes. Enforces approved KADF safety policies, procedures, and standards. Performs job related duties as specified by the user unit.</p><p><strong>Desired Candidate Profile</strong></p><h2>Qualifications You Must Have :</h2><ul><li>Graduate from technical school in electronics or manufacturer's course of instruction on power frequency convertors, or equivalent on-the-job training (OJT).</li><li>Must have a minimum of five (5) years experience in troubleshooting and repair of power frequency convertors.</li><li>Must be proficient in troubleshooting, fault isolation and repair of various types of power frequency convertors.</li><li>Skill in the use of engineering drawings, schematic diagrams, general purpose commercial test equipment and common tools is required.</li><li>Proficiency in the English language, spoken and written.</li><li>Requires current SECRET Clearance</li></ul><h2>Qualifications We Prefer:</h2><ul><li>Knowledge of the Patriot Missile System</li></ul><h2>Required Education:</h2><ul><li>Bachelor s Degree with 5 years of related experience, or Associates Degree with 8 years experience or HS Diploma/GED with 12 years of related experience.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>About The Client</b></p><p>A leading engineering and contracting company in Kuwait, recognized for delivering innovative solutions across mechanical, electrical, and fire protection systems. With a strong presence in the Kuwait market, the group has built a reputation for excellence, compliance with local authorities, and long-term client partnerships. Guided by a commitment to quality and safety, the organization continues to drive growth through specialized projects and trusted expertise.</p><p><b>About The Role</b></p><p>This position will be responsible for the end-to-end management of a diversified property portfolio spanning Residential, Commercial, Industrial, and Private assets. This role ensures properties are well-maintained, compliant with statutory regulations, and operationally efficient, while managing budgets, vendor contracts, and tenant/owner relationships. The ideal candidate will bring a versatile, multi-sector approach to property management, ensuring consistent service quality and value across all asset types under their management and care.&nbsp;</p><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>About You</b></p><p>The ideal candidate would have the following:&nbsp;</p><ul><li>Bachelor's degree in Facilities Management, Real Estate, Civil/Mechanical Engineering, Business Administration, or related field.</li><li>Minimum 8–10 years in property/facility management, with demonstrated exposure across multiple asset classes.</li><li>&nbsp;Proven experience managing a mix of Residential, Commercial, Industrial, Hospitality, and/or Private properties — not limited to a single sector</li><li>&nbsp;Strong background in negotiating, managing, and monitoring service contracts, SLAs, and vendor performance (MEP, security, cleaning, landscaping, etc.)</li><li>&nbsp;Experience preparing and managing operating budgets, service charges, and expenditure tracking</li><li>Familiarity with Kuwait municipal regulations, tenancy law, and fire/safety compliance standards</li><li>&nbsp;Fluent in English; Arabic is an advantage.</li><li>Strong stakeholder management, communication, and problem-solving skills; ability to work independently across a diverse portfolio</li><li>Must have a Kuwait valid driving license&nbsp;</li></ul><p><br></p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Performing routine check for refrigerant leaks, cleaning coils&amp; filters, electrical components. Diagnosing &amp; fixing malfunctions to ensure systems are working correctly &amp; efficiently. Good Knowledge in Central Unit, Casset, Split &amp; Chiller plants.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>SSLC</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. As an Incident Response Analyst, you will be at the forefront of defending against cyber-attacks, orchestrating swift and effective responses to security incidents, and mitigating risks to organizational assets. Your role will involve proactive monitoring, rapid detection, thorough investigation, and decisive action to contain and remediate security breaches. This position offers an exciting opportunity to apply your expertise in incident response methodologies, digital forensics, and threat intelligence to protect sensitive data, preserve organizational reputation, and uphold cybersecurity resilience. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver’s license in order to be qualified for this position. Responsibilities + Monitor security alerts and logs from various sources to promptly detect and triage potential security incidents, prioritizing based on severity and impact. + Conduct in-depth investigations into security incidents, employing digital forensics techniques and tools to analyze evidence, identify root causes, and determine the extent of compromise. + Take immediate action to contain security incidents, prevent further unauthorized access, and eradicate malicious activity from affected systems and networks. + Perform forensic analysis on compromised systems, networks, and digital artifacts to gather evidence, reconstruct events, and support incident response efforts. + Proactively search for indicators of compromise (IOCs), anomalous behavior, and emerging threats within organizational environments to detect and mitigate potential security breaches. + Collaborate closely with cross-functional teams, including IT, security operations, legal, and senior management, to coordinate incident response activities and communicate effectively throughout the incident lifecycle. + Prepare detailed incident reports documenting findings, actions taken, and lessons learned from security incidents for internal stakeholders, regulatory compliance, and potential legal proceedings. + Conduct post-incident analysis and lessons learned sessions to identify areas for improvement in incident response processes, procedures, and controls. + Stay abreast of the latest cyber threats, attack techniques, and security technologies through ongoing training, knowledge sharing, and participation in industry forums and communities. + Ensure compliance with relevant regulatory requirements, industry standards, and organizational policies related to incident response, data protection, and cybersecurity. + Perform trend analysis on events and incidents to identify and characterize threats. + Conduct open-source research to identify commercial exploits or vulnerabilities, including Zero-Day threats, necessitating prompt response actions. + Prepare comprehensive formal reports and presentations tailored for both technical and executive audiences. + Configure and optimize software and hardware-based detection and prevention mechanisms. + Assist in Computer Defense Assistance Program (CDAP) missions as requested by clients. + Stay abreast of the latest cybersecurity threats, technologies, and best practices. + Collaborate with cross-functional teams to elevate the overall cybersecurity posture. + Maintain current knowledge of relevant compliance requirements and ensure adherence. + Mentor and provide guidance to junior team members. + Collaborate with external organizations and agencies to share threat intelligence and enhance collective cybersecurity capabilities. + Performs other duties and assignments as required. Qualifications + Qualifications + Security Clearance: + Requires an active Top Secret Clearance with SCI + Education / Certifications: One year of related experience may be substituted for one year of education if degree is required. + Associate’s degree or equivalent experience preferably in Computer Science or MIS, IS, Engineering or related field. + This position requires candidates to adhere to DoD 8570.01M. + All candidates are required to maintain at least one (1) baseline certification and one (1) computing environment (CE) certification. Baseline Environment (BE) certifications cannot also be used as a Computing Environment (CE) certification. + The authorized certifications for this job title are listed as follows: + BASELINE: + Cisco: CyberOps Professional + Cisco: CCNA: Certified Network Associate - Security + CompTIA: Cloud+ ce + CompTIA: CySA+ ce: Cybersecurity Analyst + CompTIA: PenTest + + CyberSec: CFR: First Responder + EC-Council: CEH: Certified Ethical Hacker + EC-Council: CHFI: Certified Hacking Forensic Investigator + GIAC: GCFA: Certified Forensic Analyst: Certified Forensic Analyst + GIAC: GCIA: Certified Intrusion Analyst + GIAC: GCIH: Certified Incident Handler (Cannot be used as a dual qualifier) + GIAC: GICSP: Industrial Cyber Security Professional + COMPUTING ENVIRONMENT (CE): + EC Council: CIH: Certified Incident Handler + GIAC: GCFA: Certified Forensic Analyst + GIAC: GCIA: Certified Intrusion Analyst + GIAC: GCIH: Certified Incident Handler (Preferred) (Cannot be used as a dual qualifier) + GIAC: GCWN: Certified Windows Security Administrator + GIAC: GDAT: Defending Advanced Threats + GIAC: GREM: Reverse Engineering Malware + GIAC: GSEC: Security Essentials + Offensive Security: Certified Expert + Offensive Security: Certified Professional + Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree in a Business Information Systems discipline for three years general experience. + At least five (5) years of practical experience working with various data (network and system) technologies, with a minimum of two of those years focused on information systems security, cyber threats and SIEM event analysis. + Experience with a customer service-oriented company. + Skills &amp; Technology Used: + Ability to troubleshoot servers and infrastructure equipment. + Ability to assess networking requirements and provide solutions. + Ability to make accurate and independent decisions under pressure. + Ability to perform comfortably in a fast-paced, deadline-oriented work environment. + Ability to successfully execute many complex tasks simultaneously. + Visualization of quantitative (numerical) or qualitative information. + Excellent interpersonal, organizational, written, verbal communication, and briefing skills. + Excellent analytical and problem-solving skills. + Threat Intelligence and visualization technologies. + Security enclave engineering. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions, or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes, and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems, and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential Responsibilities</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes, and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems, and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, including pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to lift, carry, and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> <li>Highly desired to have a U.S. passport valid for an additional two years with at least two facing pairs (four total) of blank visa pages.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Summary <br></span><p>The role of an IT Lead - PMO is one that requires an understanding of project management, organizational leadership and communication skills. The individual’s primary goal is to ensure that all projects assigned, within Digital portfolio are being managed and delivered effectively.&nbsp;<br> This individual will have outstanding communication skills, strong analytical and problem-solving skills as well as a genuine passion for retail. Strong presentation skills are required, as well as the confidence to manage multiple stakeholders from business teams, IT teams, external vendors and delivery partners.&nbsp;<br> &nbsp;</p><br> <br><br>Job Responsibilities <br><p>•&nbsp;&nbsp; &nbsp;Manage large technical projects, define project plans, set priorities, manage resources and report on process, progress and results<br> •&nbsp;&nbsp; &nbsp;Provide day-to-day planning, coordination, and project management across the entirety of the software development and deployment life cycle<br> •&nbsp;&nbsp; &nbsp;Act as an owner, be solution-focused, analytical and drive projects from initiation to success<br> •&nbsp;&nbsp; &nbsp;Provide the project team with direction and vision, motivate individuals to perform, provide feedback, recognize strengths and provide challenges<br> •&nbsp;&nbsp; &nbsp;This is a highly visible position that will partner heavily with multiple business and technology teams and interact at all levels of the company<br> •&nbsp;&nbsp; &nbsp;Work closely with the product management team in full synergy to ensure that large scale projects are delivered on time and up to expectations.<br> &nbsp;</p><br> <br><br>Candidate Requirements <br><ul> <li>Bachelor's degree in Computer Science, Information Systems, Software Engineering, or a related discipline.</li> <li>PMP, PRINCE2, or other recognized Project Management certification is preferred.</li> <li>Strong technical background with hands-on experience in software development and large-scale software systems.</li> <li>Minimum 5 years of experience leading complex, product-oriented technology projects.</li> <li>Proven experience managing large-scale projects involving multiple teams, stakeholders, and products.</li> <li>Strong analytical and problem-solving skills with the ability to make data-driven decisions.</li> <li>Proficiency in project management tools such as MS Project, Jira, Asana, or similar platforms.</li> <li>Experience working with SAP and/or other enterprise ERP systems.</li> <li>Good understanding of Agile delivery methodologies, including Scrum and Kanban.</li> <li>Demonstrated ability to manage multiple priorities simultaneously while delivering projects within agreed timelines.</li> <li>Strong planning skills with the ability to provide realistic effort estimates and drive project execution through to completion.</li> <li>Excellent stakeholder management, interpersonal, written, and verbal communication skills.</li> <li>Experience managing software vendors, implementation partners, and third-party service providers.</li> <li>Fluent in English, both written and spoken.</li> </ul><br><br><br> </div>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance. Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements. USAF equivalent position is Munitions/Weapons Technician Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li><li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li><li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li><li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li><li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li><li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li><li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li><li>Maintain weapons certification and currency.</li><li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li><li>Perform all other duties as assigned or requested.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have High School diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Munitions/Weapons maintenance experience required.</li><li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li><li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li><li>Must be able to perform Increment Monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to Deploy to Forward Locations (other countries) as Directed by the Government.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications:</p><ul><li>Associate degree in a relevant career field.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Munitions/Weapons experience within the last 10 years .</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Dpay Consultancy Service Pvt Ltd</b></p><p>Position Details:</p><p>Job Title: Microsoft Dynamics 365 CRM Technical Consultant</p><p>Role: Lead technical consultant</p><p>Experience: 912+ Years (10+ Preferred)</p><p>Employment Type: Contract (5 months may be extended)</p><p>Location: Kuwait City, Kuwait (On-site)</p><p>Positions: 2</p><p>We are looking for experienced Microsoft Dynamics 365 CRM Technical Consultants with expertise in Dynamics 365 CE, Project Operations, Dataverse, integrations, Azure services, and ERP Integrations (Preferred with Oracle), Dual-write, PPAC. The consultant must design, develop, customise, integrate, and support both cloud and onPrem.</p><p>Required Experience</p><p>Minimum 8 years in Microsoft Dynamics 365 CRM Technical Consultant with Project Operations.</p><p>Preferred 10+ years End-to-End Implementations</p><p>Technical Skills</p><ul><li>Dynamics 365 CRM, CE, Project Operations.</li><li>Dataverse, Model-driven Apps Power Platform solutions</li><li>ERP Integration (Dynamics 365 Finance/F&amp;O, SAP, Oracle, NetSuite)</li><li>C#, .NET, ASP.NET, JavaScript, TypeScript, HTML, CSS</li><li>Plugins, Custom Workflows, Business Rules, Ribbon Workbench</li><li>REST APIs, SOAP, JSON, XML, OData</li><li>Azure Functions, Logic Apps, Service Bus, APIM</li><li>Microsoft Graph API, OAuth 2.0, Webhooks</li><li>Dual-write</li><li>SQL Server, FetchXML, SSRS, Git, Azure DevOps</li></ul><p>Roles &amp; Responsibilities</p><ul><li>Develop and customise Dynamics 365 CRM.</li><li>Develop and customise Project Operations.</li><li>Build plugins, workflows, APIs, and integrations.</li><li>Integrate App with ERP systems.</li><li>Develop Power Automate flows.</li><li>Perform code reviews and troubleshooting.</li><li>Support deployments and documentation.</li><li>Collaborate with functional consultants and business users.</li><li>Lead the subordinates of the team.</li></ul><p>Preferred Certifications</p><p>Microsoft Certification</p><p>Education</p><p>Any degree.</p><p>Soft Skills</p><p>Excellent communication, analytical thinking, client-facing experience, teamwork, and problem- solving.</p><p><br></p><ul><li><br></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum 8 years in Microsoft Dynamics 365 CRM Technical Consultant with Project Operations.</li><li>Preferred 10+ years End-to-End Implementations</li><li>Technical Skills: Dynamics 365 CRM, CE, Project Operations, Dataverse, Model-driven Apps Power Platform solutions, ERP Integration (Dynamics 365 Finance/F&amp;O, SAP, Oracle, NetSuite), C#, .NET, ASP.NET, JavaScript, TypeScript, HTML, CSS, Plugins, Custom Workflows, Business Rules, Ribbon Workbench, REST APIs, SOAP, JSON, XML, OData, Azure Functions, Logic Apps, Service Bus, APIM, Microsoft Graph API, OAuth 2.0, Webhooks, Dual-write, SQL Server, FetchXML, SSRS, Git, Azure DevOps</li><li>Roles &amp; Responsibilities: Develop and customise Dynamics 365 CRM, Develop and customise Project Operations, Build plugins, workflows, APIs, and integrations, Integrate App with ERP systems, Develop Power Automate flows, Perform code reviews and troubleshooting, Support deployments and documentation, Collaborate with functional consultants and business users, Lead the subordinates of the team.</li><li>Preferred Certifications: Microsoft Certification</li><li>Education: Any degree.</li><li>Soft Skills: Excellent communication, analytical thinking, client-facing experience, teamwork, and problem-solving.</li><li>Candidate Preferences: Nationality: Indian, Gender: Any, Valid Passport, Excellent English communication, Immediate joiners preferred, Willingness to relocate to Kuwait.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Emerald Isle Manpower announces an excellent career opportunity for a talented Executive Chef in Kuwait. Our prominent client seeks a highly disciplined, operational professional to lead their culinary teams. This role perfectly suits individuals who possess extensive experience in managing large-scale culinary environments.</p><p>The selected Executive Chef will take full responsibility for managing central kitchens and institutional food operations. You will oversee daily food preparation, supervise kitchen staff, and guarantee efficiency across all production lines. The role demands an absolute mastery over food safety systems, kitchen discipline, and waste management. Consequently, you will implement standard operational procedures to maintain impeccable production consistency and high culinary standards. Your leadership will directly influence the quality, flavor, and delivery of food services across the client s facilities.</p><p>Our client offers a competitive financial package along with comprehensive institutional support. The position provides a monthly basic salary of KWD 500, which equals approximately LKR 542,000 based on current exchange rates. This standard full-time employment contract requires a dedicated professional ready to operate in a fast-paced environment. Furthermore, the employer provides excellent structural stability, enabling you to focus entirely on elevating culinary standards and maximizing operational productivity.</p><p>The employer offers an exceptional benefits package to ensure maximum comfort and security for the chosen candidate. Beyond the competitive basic salary, the company provides free duty meals during working hours. Consequently, you will receive fully paid accommodation and comprehensive medical insurance coverage. Furthermore, the employer handles your air ticket and provides daily transport facilities to and from the workplace. These benefits guarantee a stress-free living experience in Kuwait, allowing you to save your monthly earnings.</p><p>Emerald Isle Manpower stands as one of Sri Lanka s most reliable overseas recruitment agencies. With years of experience, we specialize in connecting skilled Sri Lankan professionals with trusted employers across the globe. Unlike many others, we ensure a transparent recruitment process and provide full support before, during, and after deployment. Therefore, candidates can trust us to help them find career-enhancing opportunities in safe and reputable workplaces.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Candidates must meet specific professional qualifications to qualify for this premium vacancy. Firstly, applicants must possess strong experience in central kitchens and large-scale institutional food operations. Secondly, you need a masterful command over international food safety systems and rigorous kitchen discipline. Furthermore, candidates must demonstrate a strong focus on quality control and production consistency under high-volume pressure. Lastly, the maximum age limit for this position is 35 years.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br>Responsibility:<br>•<br>Lead and manage the SRE team to ensure effective monitoring, observability, and reliability practices across all digital channels.<br>•<br>Own and govern the Dynatrace platform, ensuring optimal utilization, standardization, and continuous improvement.<br>•<br>Define, implement, and evolve the observability strategy in alignment with business and technology goals.<br>•<br>Oversee monitoring operations for applications, infrastructure, and digital platforms (e.g., mobile apps and websites).<br>•<br>Ensure the development and standardization of dashboards, alerts, and business KPIs across all services.<br>•<br>Drive automation initiatives (e.g., auto-remediation, alert optimization, workflow automation) to improve efficiency and reduce manual effort.<br>•<br>Ensure full observability coverage for all new services, features, and system integrations.<br>•<br>Lead performance monitoring and optimization efforts to enhance system stability and user experience.<br>•<br>Oversee integrations between monitoring tools and other enterprise systems.<br>•<br>Establish and enforce best practices, standards, and governance for monitoring and incident management.<br>•<br>Ensure effective root cause analysis (RCA) practices and follow-up actions to prevent recurrence.<br>•<br>Monitor and report on system performance, availability, and reliability metrics.<br>•<br>Ensure proactive identification of risks, issues, and performance bottlenecks.<br>•<br>Validate and approve monitoring configurations, alerting strategies, and dashboard designs.<br>•<br>Perform all the above-mentioned roles and responsibilities in compliance to the Information Security Management System (ISMS) policies, Group policies and report any information/physical security breaches, non-compliance gaps or incidents to the supervisor/manager immediately<br>•<br>Be aware of, and adhere to, all environmental requirements as set by the statutory bodies in Kuwait, or by the published policies of Zain Group/Kuwait<br>•<br>Zain abides by fulfilling the occupational health and safety certificate requirements that establishes and maintains an OH&amp;S management system that eliminates hazards and minimizes OH&amp;S risks (including system deficiencies), take advantage of OH&amp;S opportunities and addresses OH&amp;S management system nonconformities associated with its activities to all youth .<br>What We Need From You<br>Skills:<br>•<br>Manage team workload, priorities, and resource allocation to ensure service reliability and operational efficiency.<br>•<br>Provide technical guidance, coaching, and mentorship to team members.<br>•<br>Set performance objectives and conduct regular evaluations for team members.<br>•<br>Collaborate with development, infrastructure, and business teams to ensure alignment and effective communication.<br>•<br>Operating Systems &amp; Infrastructure Awareness<br>•<br>Troubleshooting &amp; Root Cause Thinking<br>•<br>Intermediate - Networking background<br>•<br>Intermediate - Programming and development (Java script, React, React Native etc.)<br>•<br>Intermediate - SQL/ PLSQL<br>Education Level &amp; Major: Bachelor s degree in Computer Science, Information Technology, Software Engineering, or a any related field.<br>About Application Process<br>If you meet the criteria and you are enthusiastic about the role, we would welcome your application.<br>To<br>complete the application you would need the following document(s):<br>• Resume/CV<br>• Passport-size photograph<br>• Highest Education Qualification<br>• Copy of Civil ID/Passport<br>Apply for This Vacancy<br>Back<br></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b><i>Department:</i></b><i> Finance Department</i></p><p><i>Kana Group is seeking a proactive and analytical </i><b><i>Female Cost Controller</i></b><i> to oversee cost efficiency, margin control, budgeting support, and inventory discipline across its diversified businesses (Retail, Services, F&amp;B, Healthcare, and UAE operations).</i></p><p><br></p><p><b>Key Responsibilities</b></p><ul><li>Monitor COGS, gross margins, and operating costs across all business units.</li><li>Prepare monthly variance analysis versus budget and prior periods.</li><li>Control inventory levels, stock aging, and wastage.</li><li>Review purchasing requests against budget, consumption, and stock coverage.</li><li>Support annual budgets, forecasts, and cost planning processes.</li><li>Develop cost reports, dashboards, and management KPIs.</li><li>Partner with Operations, Procurement, and Finance to improve profitability.</li><li>Strengthen costing processes and internal controls through ERP systems.</li><li>Plan site visits and conduct periodic audits on cash handling, inventory controls, and stock management.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Requirements:</b></p><ul><li>Bachelor’s degree in accounting, Finance, or related field.</li><li>3–7 years of experience in cost control / management accounting.</li><li>Experience in Retail, F&amp;B, Healthcare, or multi-entity groups preferred.</li><li>Strong Excel and ERP skills.</li><li>Analytical mindset with strong communication skills.</li></ul><p><br></p><p><b>Preferred Qualifications:</b></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;CMA / ACCA / CPA is an advantage.</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Long Description <br><br>Job Summary <br></span><p>Reporting to the Marketing Manager, the Marketing Executive is responsible for developing and implementing the marketing plan for the Automotive division of Alghanim Industries.</p><br> <br><br>Job Responsibilities <br><ul> <li>Develop and implement the marketing plan.</li> <li>Plan and oversee the development and execution of all marketing communication initiatives and advertising activities.</li> <li>Develop sales promotion and merchandising strategies to ensure maximum market penetration.</li> <li>Develop and implement systems to monitor competitive market position in relation to own product lines, including pricing, product features and sales strategy.</li> <li>Analyse sales results and provide recommendations.</li> <li>Participate in setting the sales and pricing strategy.</li> <li>Is responsible for showroom display and merchandising.</li> <li>Plan and conduct market research.</li> </ul> <br><br>Candidate Requirements <br><ul> <li>3-4 years in Automotive Marketing Experience, preferably with a multinational company</li> <li>Excellent communication and presentation skills.</li> <li>Proven analytical and organizational skills.</li> <li>Self motivated with strong leadership and team player skills.</li> <li>Ability to work in a fast-paced and demanding environment.</li> <li>Bilingual (English/Arabic).</li> </ul> <br><br>Education <br>Bachelor’s Degree in Business Administration<br>MBA in Business Administration<br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Roles &amp; Responsibilities:</p><p>Inspect, diagnose, repair, and maintain reefer containers.</p><p>Perform preventive and corrective maintenance on refrigeration systems.</p><p>Troubleshoot electrical, mechanical, and refrigeration faults.</p><p>Handle units from leading brands such as Carrier, Thermo King, Daikin, Star Cool, and similar.</p><p>Prepare maintenance reports and update service records using MS Excel.</p><p>Ensure equipment operates efficiently and complies with safety standards.</p><p>Requirements:</p><p>ITI / Diploma in Refrigeration, Air Conditioning, Mechanical, or a related field.</p><p>Experience working on reefer containers is mandatory.</p><p>Hands-on experience with Carrier, Thermo King, Daikin, Star Cool, or similar reefer units.</p><p>Proficiency in MS Excel for reporting and documentation.</p><p>Good English communication skills.</p><p>GCC experience is preferred.</p><p>Benefits:</p><p>Accommodation provided</p><p>Transportation provided</p><p>Online Interview</p><p>Attractive salary package</p><p>Specialism: Refrigeration &amp; Cold Chain / Container Maintenance</p><p>Job Types: Full-Time</p><p>Location: Kuwait</p><p>Duty Hours: 9(8+1) Hrs / 6 Days</p><p>Duty Days: 6 Days</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>ITI / Diploma in Refrigeration, Air Conditioning, Mechanical, or a related field.</li><li>Experience working on reefer containers is mandatory.</li><li>Hands-on experience with Carrier, Thermo King, Daikin, Star Cool , or similar reefer units.</li><li>Proficiency in MS Excel for reporting and documentation.</li><li>Good English communication skills.</li><li>GCC experience is preferred.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>FUNCTION</b>:</p> <p> </p> <p>Maintains current and valid technical data, publications, catalogs, and other reference material in an organized, readily accessible condition.</p> <p>This includes: </p> <p> <b>(a)</b> Ensuring proper classification and filing of all metrology technical data, publications and calibration procedures.</p> <p> <b>(b)</b> Ensuring technical data is available and current. Requesting new data as existing data becomes obsolete. Developing procedures for conducting a periodic inventory of publications.</p> <p> <b>(c)</b> Ensuring continued follow up of requests for technical publications. Referring long delay items to KAF management for resolution.</p> <p>It is anticipated that Technical Librarian will be assigned as these job descriptions state and other related specific tasking details and priorities will be determined and set by the Commander, KAFMB and communicated to the Contractor lead.</p> <p> </p> <p>QUALIFICATIONS:</p> <p>An Associate s degree and Vocational training. Must be a graduate of a civilian or U.S. military school related to this area of expertise and have two (2) years of relevant experience. OR; Four (4) years of work experience in a similar position and experience in operating computer database systems and handling electronically stored information/media.</p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>FUNCTION: Maintains current and valid technical data, publications, catalogs, and other reference material in an organized, readily accessible condition. This includes: (a) Ensuring proper classification and filing of all metrology technical data, publications and calibration procedures. (b) Ensuring technical data is available and current. Requesting new data as existing data becomes obsolete. Developing procedures for conducting a periodic inventory of publications. (c) Ensuring continued follow up of requests for technical publications. Referring long delay items to KAF management for resolution. It is anticipated that Technical Librarian will be assigned as these job descriptions state and other related specific tasking details and priorities will be determined and set by the Commander, KAFMB and communicated to the Contractor lead.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>QUALIFICATIONS:</h2><p>An Associate s degree and Vocational training. Must be a graduate of a civilian or U.S. military school related to this area of expertise and have two (2) years of relevant experience. OR; Four (4) years of work experience in a similar position and experience in operating computer database systems and handling electronically stored information/media.</p><p></p></section>