Car painter Jobs

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Role &amp; responsibilities Perform quality control (QC) tests on raw materials, ingredients, finished beverages, and packaging materials. Collect and analyze samples from production lines according to quality control procedures. Conduct physical, chemical, and microbiological tests as per PepsiCo quality standards. Test water quality, including pH, hardness, TDS, chlorine, conductivity, and microbiological parameters. Analyze syrup and beverage samples for Brix (sugar content), acidity, CO levels, color, and taste. Verify product specifications before production, during processing, and after packaging. Monitor Critical Control Points (CCPs) in accordance with HACCP and Food Safety Management Systems. Ensure compliance with GMP (Good Manufacturing Practices), HACCP, ISO 22000, and food safety regulations. Calibrate and maintain laboratory instruments such as pH meters, refractometers, spectrophotometers, conductivity meters, and weighing balances. Record, document, and maintain accurate laboratory test results and quality reports. Report non-conforming products immediately and assist in root cause analysis. Support production teams by providing timely quality feedback and corrective actions. Monitor sanitation and hygiene standards in laboratory and production areas. Verify cleaning and sanitation effectiveness through environmental monitoring. Conduct shelf-life and stability testing of finished products. Assist during internal, customer, and external quality audits. Ensure proper storage, handling, and disposal of laboratory chemicals and reagents. Follow laboratory safety procedures and use appropriate Personal Protective Equipment (PPE). Maintain laboratory cleanliness and ensure all equipment is in good working condition. Participate in continuous improvement initiatives to enhance product quality and laboratory efficiency.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Diploma/Bachelor's degree in Food Technology, Food Science, Chemistry, Microbiology, Biotechnology, or a related field. Experience: 25 years in a beverage, soft drink, bottled water, dairy, or food manufacturing company. Experience in multinational FMCG companies such as PepsiCo, Coca-Cola, Nestl, or similar food and beverage manufacturers is highly preferred.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><br></p><p>Perform preventive, predictive, and corrective maintenance on PLCs, HMIs, SCADA systems, industrial control systems, instrumentation, and automation equipment to ensure maximum system reliability</p><p>Monitor the performance of PLC-controlled production lines, automation systems, and field devices, identifying abnormalities, and implementing corrective actions to maximize equipment availability, reliability, and operational efficiency.</p><p>Diagnose and troubleshoot faults in PLC programs, HMIs, VFDs, servo systems, sensors, actuators, control panels, electrical systems, and industrial communication networks.</p><p>Configure, troubleshoot, maintain, and optimize Variable Frequency Drives (VFDs) and motor control systems, including Danfoss, Siemens, Schneider Electric.</p><p>Conduct routine inspections, functional testing, and preventive maintenance of electrical, instrumentation, and automation equipment to ensure safe, reliable, and efficient operation.</p><p>Support the installation, commissioning, modification, and upgrading of PLC, HMI, SCADA, electrical control panels, instrumentation, and automation systems, ensuring proper testing, and validation.</p><p>Maintain accurate and up-to-date maintenance records, calibration certificates, troubleshooting reports, PLC/HMI program backups, and technical documentation.</p><p>Report shortages of automation spare parts, electrical components, instrumentation devices, and critical maintenance materials to the supervisor</p><p>Analyze recurring equipment failures, identify root causes, and recommend corrective actions and continuous improvement initiatives to enhance automation system reliability and efficiency.</p><p>Collaborate with production, maintenance, engineering, and quality teams to implement process improvements, reduce equipment downtime, improve Overall Equipment Effectiveness (OEE), and support continuous operational excellence.</p><p>Ensure all maintenance, installation, and modification activities comply with company procedures, ISO standards, GMP requirements (where applicable), and applicable electrical and automation regulations.</p><p>&nbsp;</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><br></p><p><br></p><p>Qualifications and language:</p><p><br></p><p>Minimum 2 years of experience in the same field – preferable in food production factory.</p><p><br></p><p>Minimum Technical Diploma in Electrical, Electronic, Mechatronic Engineering or Automation Technology.</p><p><br></p><p>English languages (verbal, written). Proficiency in Arabic is a plus.</p><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Conducts VTC conferences, operates VTC equipment such as VTC conferencing equipment, consoles, Digital Video Recorders (DVD), cameras, microphones, desktop and laptop computers supporting VTC events. Reports to the Site Manager as required. Program: OMDAC-SWACA This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver’s license in order to be qualified for this position. Responsibilities + Coordinates with customer to endure equipment is operational. + Sets-up and operates VTC equipment. + Establishes end to end secure and non-secure connectivity to support conferences. + Establishes proper cable connection and routing to various Audio/Video and communication links. + Adjusts sound and light levels for optimum performance of equipment and comfort of customers. + Troubleshoots VTC and connectivity problems with local and distant end technical control facilities and help-desks to restore communication and resolve poor reception/transmission issues. + Troubleshoots equipment; configures modems and data timing and transfer rates. + Resolves connectivity problems with technical personnel. + Performs weekly maintenance on all associated VTC equipment. + Operates, administers, and maintains the VTC Bridge. Required to manipulate the bridge to provide technical support for all VTC circuits attached. + Performs other duties and assignments as required. Qualifications + Qualifications + Security Clearance: + Requires an active Secret Clearance + Education/Certifications: One year related experience may be substituted for one year of education, if degree is required. + High School diploma or GED required. + Experience: One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience. + Requires a minimum of 5 years experience in Video Teleconferencing or Audio Video Productions. + Must be able to work rotating shift schedules which provide 24 hour day/7 day week coverage. + Experience with a customer service-oriented company. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Provide technical expertise on fire engines, rescue vehicles, airport rescue and firefighting (ARFF) vehicles, tankers, aerial platforms, and specialized firefighting vehicles.</p><p>Review and evaluate technical specifications, drawings, datasheets, and manufacturer documentation.</p><p>Support procurement activities by preparing technical specifications, evaluating vendor proposals, and participating in technical bid evaluations.</p><p>Ensure fire vehicles comply with applicable safety regulations, operational requirements, and recognized industry standards.</p><p>Recommend fleet upgrades, modifications, and equipment improvements to enhance operational capability.</p><p>Support emergency response operations by providing technical assistance when required.</p><p>Knowledge in:</p><ul><li>Fire vehicle construction and design</li><li>Fire pumps and water delivery systems</li><li>Foam proportioning systems</li><li>Hydraulic rescue equipment</li><li>Diesel engines and powertrains</li><li>Heavy vehicle electrical and electronic systems</li><li>Pneumatic and hydraulic systems</li><li>Vehicle diagnostics and troubleshooting</li><li>Preventive and corrective maintenance</li><li>Fleet management principles</li><li>Technical specifications and procurement</li><li>Inspection, testing, and commissioning of emergency vehicles</li><li>Occupational health and safety requirements</li><li>Emergency vehicle operational standards and best practices</li></ul><p>Skills:</p><ul><li>Strong technical and analytical skills</li><li>Ability to interpret engineering drawings and technical manuals</li><li>Inspection and quality assurance</li><li>Project coordination</li><li>Vendor and supplier coordination</li><li>Communication and presentation skills</li><li>Computer proficiency, including Microsoft Office and computerized maintenance management systems (CMMS)</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in mechanical engineering, Automotive Engineering, Fire Protection Engineering, or a related engineering discipline.</p><p>Relevant professional experience in fire vehicle maintenance, emergency vehicle engineering, fleet management, or heavy vehicle maintenance.</p><p>Experience with municipal, industrial, military, or airport firefighting vehicles is preferred.</p><p></p></section>

Driver <br><br>Job Id :100195419<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>We are looking for experienced Generator / Diesel Mechanics with the following qualifications and responsibilities:<br><br>Key Responsibilities<br><br> Perform preventive and corrective maintenance on diesel generators of various capacities (e.g., 30 KVA to 2000 KVA). Perform inspection, servicing, maintenance, and repair of diesel-powered equipment and vehicles. Diagnose and repair mechanical, electrical, and control system faults. Conduct routine inspections, servicing, lubrication, and filter replacement. Repair and overhaul diesel engines, alternators, radiators, fuel systems, and cooling systems. Troubleshoot starting, charging, governor, and voltage regulation issues. Test generator performance under load and ensure stable voltage and frequency. Install, commission, and decommission generator sets. Maintain battery systems, chargers, control panels, and Automatic Transfer Switch (ATS) systems. Replace defective components including injectors, fuel pumps, turbochargers, belts, hoses, and sensors. Maintain accurate maintenance records, service reports, and spare parts inventory. Respond to emergency generator breakdowns and minimize equipment downtime. Ensure compliance with manufacturer specifications and safety procedures. Coordinate with operations teams to schedule maintenance activities. Maintain housekeeping standards in the workshop and at project sites.<br><br>Skills Required<br><br> Knowledge of diesel engines and alternators. Ability to read electrical and mechanical drawings. Experience with Perkins, Cummins, Caterpillar, FG Wilson, Atlas Copco, Volvo Penta, MTU, or similar generator brands. Familiarity with engine control modules (ECM) and diagnostic tools. Strong troubleshooting and fault-finding skills. Ability to work independently as well as part of a team. Ability to work independently and under pressure during emergency breakdowns. Commitment to workplace safety and preventive maintenance. Minimum 5-8 Years’ Experience and available valid Kuwaiti Driving License will be preferred. Candidate should be inside Kuwait and must have valid residency Visa 18 with Local transfer.<br><br>Job Types: Full-time, Permanent<br><br>Submit your CV to: mehndishah@sweetynational.com<br><br>Whats App: 66286604<br><br>Basic Details<br><br>Location : Fahaheel , Kuwait<br><br>Qualification<br><br>Posted : Today<br><br>Job Type : Full-Time<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : +965 66286604<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : Not-Mentioned

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Preventive Maintenance</strong></p><br><ul><li>Perform scheduled preventive maintenance in accordance with the hotel's Planned Preventive Maintenance (PPM) program.</li><li>Conduct routine inspections of hotel facilities, guestrooms, public areas, back-of-house, and engineering plant rooms.</li><li>Identify equipment deterioration and perform proactive maintenance to prevent breakdowns.</li><li>Ensure maintenance activities are completed in accordance with manufacturer recommendations and engineering standards.</li></ul><p><strong>Corrective Maintenance</strong></p><br><ul><li>Respond promptly to maintenance requests through the hotel's work order system.</li><li>Diagnose faults and perform repairs to electrical, plumbing, HVAC, mechanical, and building systems.</li><li>Restore equipment and facilities to operational condition with minimal disruption to hotel operations.</li><li>Escalate specialized repairs beyond the scope of the role to the Engineering Supervisor.</li></ul><p><span><strong>Day-to-Day Responsibilities</strong></span></p><br><p>Daily Inspections</p><br><ul><li>Attend the Engineering daily briefing and review assigned work orders.</li><li>Inspect guestrooms, public areas, plant rooms, and back-of-house facilities.</li><li>Monitor the condition and performance of building systems and equipment.</li><li>Check for safety hazards, leaks, abnormal noises, equipment alarms, and operational deficiencies.</li></ul><p>Maintenance Activities</p><br><ul><li>Carry out preventive maintenance as scheduled.</li><li>Respond promptly to maintenance requests from operational departments.</li><li>Repair electrical, plumbing, HVAC, mechanical, and minor civil defects.</li><li>Replace defective components such as lamps, switches, valves, taps, filters, thermostats, belts, and motors where applicable.</li><li>Test equipment after repairs to ensure proper operation.</li></ul><p>Guest Support</p><br><ul><li>Respond courteously and professionally to guest maintenance requests.</li><li>Complete guestroom repairs with minimal inconvenience to guests.</li><li>Maintain a high standard of workmanship and cleanliness while working in occupied areas.</li></ul><p>Documentation</p><br><ul><li>Complete work orders and preventive maintenance records accurately.</li><li>Report recurring equipment failures and recommend corrective actions.</li><li>Notify the Engineering Supervisor of major repair requirements or spare parts needed.</li></ul><p>Safety &amp; Housekeeping</p><br><ul><li>Follow lock-out/tag-out (LOTO) procedures where applicable.</li><li>Wear appropriate Personal Protective Equipment (PPE).</li><li>Maintain tools, equipment, and work areas in a clean and organized condition.</li><li>Ensure compliance with hotel health, safety, and environmental standards.</li></ul><p><span><strong>Qualifications:</strong></span></p><br><p><strong>Education</strong></p><br><ul><li>Diploma or Technical Certificate in Electrical, Mechanical, HVAC, Building Services, or a related technical field.</li></ul><p><strong>Experience</strong></p><br><ul><li>Minimum <strong>2–3 years</strong> of maintenance experience in a hotel, commercial building, or facilities environment.</li><li>Experience in multi-skilled maintenance across electrical, plumbing, HVAC, and general building systems.</li><li>Previous hospitality experience is preferred.</li></ul><br> </div>

Video Testimonial<br><br>Job Details<br><br>Department: 2nd Floor Rehab<br><br>Shift: Night<br><br>Working Hours: 630p to 700a<br><br>Summary:<br><br>The primary function of the PCT is to assist the patient and family with basic patient care, monitoring, hygiene, and to help ensure care is complete. The PCT works as an essential part of the patient care team. As the member who spends most of their time in the presence of the patient, compassion, caring, and excellent human interaction skills are necessary along with excellent communication skills both to and from the patient and family, and to and from the rest of the healthcare team.<br><br>Other Information:<br><br>12 college level credit hours that include a passing grade in English Composition with a C or higher and an overall GPA of 2.0 or greater. (transcripts will be verified upon application) Healthcare experience preferred but not required Service industry experience preferred but not required Willingness to work flexible hours Good organization skills Good verbal and written communication skills Ability to learn and apply new healthcare related skills Ability to communicate effectively and do so consistently Ability to collaborate with the health care team effectively and do so consistently Ability to engage people at the appropriate level for their wellness and cognition Ability to problem solve Ability to be proactive in anticipating the customer’s needs Will provide education that includes: CPR, Skills training, Crucial Conversations, and Hospitality in Healthcare<br><br>This job will be authorized 72.00 hours bi-weekly.<br><br>"><br><br>Department: 2nd Floor Rehab<br><br>Shift: Night<br><br>Working Hours: 630p to 700a<br><br>Other Information:<br><br>12 college level credit hours that include a passing grade in English Composition with a C or higher and an overall GPA of 2.0 or greater. (transcripts will be verified upon application) Healthcare experience preferred but not required Service industry experience preferred but not required Willingness to work flexible hours Good organization skills Good verbal and written communication skills Ability to learn and apply new healthcare related skills Ability to communicate effectively and do so consistently Ability to collaborate with the health care team effectively and do so consistently Ability to engage people at the appropriate level for their wellness and cognition Ability to problem solve Ability to be proactive in anticipating the customer’s needs Will provide education that includes: CPR, Skills training, Crucial Conversations, and Hospitality in Healthcare<br><br>This job will be authorized 72.00 hours bi-weekly.

Video Testimonial<br><br>Job Details<br><br>Department: 2nd Floor Rehab<br><br>Shift: Day<br><br>Working Hours: 630am-700pm<br><br>Summary:<br><br>The primary function of the PCT is to assist the patient and family with basic patient care, monitoring, hygiene, and to help ensure care is complete. The PCT works as an essential part of the patient care team. As the member who spends most of their time in the presence of the patient, compassion, caring, and excellent human interaction skills are necessary along with excellent communication skills both to and from the patient and family, and to and from the rest of the healthcare team.<br><br>Other Information:<br><br>12 college level credit hours that include a passing grade in English Composition with a C or higher and an overall GPA of 2.0 or greater. (transcripts will be verified upon application) Healthcare experience preferred but not required Service industry experience preferred but not required Willingness to work flexible hours Good organization skills Good verbal and written communication skills Ability to learn and apply new healthcare related skills Ability to communicate effectively and do so consistently Ability to collaborate with the health care team effectively and do so consistently Ability to engage people at the appropriate level for their wellness and cognition Ability to problem solve Ability to be proactive in anticipating the customer’s needs Will provide education that includes: CPR, Skills training, Crucial Conversations, and Hospitality in Healthcare<br><br>This job will be authorized 48.00 hours bi-weekly.<br><br>"><br><br>Department: 2nd Floor Rehab<br><br>Shift: Day<br><br>Working Hours: 630am-700pm<br><br>Other Information:<br><br>12 college level credit hours that include a passing grade in English Composition with a C or higher and an overall GPA of 2.0 or greater. (transcripts will be verified upon application) Healthcare experience preferred but not required Service industry experience preferred but not required Willingness to work flexible hours Good organization skills Good verbal and written communication skills Ability to learn and apply new healthcare related skills Ability to communicate effectively and do so consistently Ability to collaborate with the health care team effectively and do so consistently Ability to engage people at the appropriate level for their wellness and cognition Ability to problem solve Ability to be proactive in anticipating the customer’s needs Will provide education that includes: CPR, Skills training, Crucial Conversations, and Hospitality in Healthcare<br><br>This job will be authorized 48.00 hours bi-weekly.

<p><h4>Position summary</h4> <p>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards.</p> <p>Display advanced ability to read standard blueprints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks.</p> <p>Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters—ensuring all methods, materials and practices meet company standards and local and national codes—with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TVs. Use the Lockout/Tagout system before performing any maintenance work.</p> <p>Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds.</p> <p>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs,</p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p><strong>Laserfiche Administration: Configure, maintain, and troubleshoot Laserfiche workflows, repositories, and integrations.</strong></p></li><li><p>System Support: Provide technical support for archive and correspondence applications, ensuring high availability and performance.</p></li><li><p>Database Management: Administer MS-SQL databases, including performance tuning, backup, and recovery.</p></li><li><p>Server &amp; Storage Management: Oversee server infrastructure and storage systems, ensuring reliability, scalability, and security.</p></li><li><p>Incident Resolution: Diagnose and resolve application, server, and database issues in collaboration with vendors and internal teams.</p></li><li><p>Documentation: Maintain clear technical documentation, SOPs, and escalation procedures.</p></li><li><p>User Training: Support end-users with training, guidance, and troubleshooting assistance.</p></li><li><p>Compliance &amp; Security: Ensure systems adhere to organizational policies, data protection standards, and IT governance frameworks.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in Computer Science, Information Technology, or related field.</p></li><li><p>Proven experience in Laserfiche system administration.</p></li><li><p>Strong knowledge of Microsoft OS environments (Windows Server, Active Directory).</p></li><li><p>Hands-on expertise with MS-SQL (queries, stored procedures, optimization).</p></li><li><p>Experience in server and storage administration (SAN/NAS, virtualization, backup solutions).</p></li><li><p>Familiarity with ITIL practices and enterprise support frameworks.</p></li><li><p>Excellent problem-solving, communication, and documentation skills.</p></li><li><p>Ability to work independently and collaboratively across ministries and vendors.</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Long Description <br><br>Job Summary <br></span><p>Reporting to the Section Head, the Installer makes sure that all furniture items are quickly and neatly displayed in the showroom. &nbsp;</p><br> <br><br>Job Responsibilities <br><p>•&nbsp;&nbsp; &nbsp;Handling the assembly of furniture items within the showroom, making sure that quality checks are performed.<br> •&nbsp;&nbsp; &nbsp;Liaising with the VM team, Merchandisers and Storekeepers to get received items displayed as soon as possible.<br> •&nbsp;&nbsp; &nbsp;Responsible for disassembling, safely packing and quality checking sold pieces from the showroom. Liaising with the Sales Managers, VM and Merchandising team to ensure quick removal and replacement of items.<br> •&nbsp;&nbsp; &nbsp;Assisting Storekeepers and Labourers with ‘back-of-house’ tasks as necessary when installation work is not possible.<br> •&nbsp;&nbsp; &nbsp;Ensuring the safe handling and movement of product so as to minimise damages and keep shrinkage costs to a minimum.<br> &nbsp;</p><br> <br><br>Candidate Requirements <br><p>•&nbsp;&nbsp; &nbsp;Experience in furniture assembly<br> •&nbsp;&nbsp; &nbsp;Logical and methodical approach to problem solving.<br> •&nbsp;&nbsp; &nbsp;Positive attitude with a ‘can do’ approach when working under pressure.<br> •&nbsp;&nbsp; &nbsp;Results oriented.<br> &nbsp;</p><br> <br><br>Education <br><br><br> </div>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Prepares weekly, monthly, quarterly, and annual utilization schedules for maintenance. Maintains proficiency in operations of the USAF Maintenance Information System including Core Automated Maintenance System (CAMS), Centralized Engine Management System (CEMS), and other maintenance management database library programs. Maintains equipment records in library files. Collects, reviews, and files documented information for planning and scheduling of various maintenance activities. Ensures accurate documentation is maintained for aircraft engines, munitions, missiles, AGE configurations, Time Compliance Technical Orders, time change items, and special inspections.</p> <p>USAF equivalent position is Aircraft Scheduling & Documentation Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Assist in the preparations of the weekly, monthly, quarterly, and annual utilization schedules for maintenance.</li> <li>Will oversee TCTO process for completion and proper documentation with IMDS and/or CEMS.</li> <li>Maintains assigned aircraft/equipment records in database library files within IMDS and/or CEMS.</li> <li>Assists in the collection, review, and filing of documented information for planning and scheduling of RPA maintenance activities.</li> <li>Ensure accurate documentation is maintained for aircraft engines, munitions, missiles, AGE configurations, Time Compliance Technical Orders, time change items, and special inspections.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one-year actual aircraft plans & scheduling experience required.</li> <li>Must possess basic planning and organizational skills.</li> <li>Must be able to work under deadlines with minimal supervision.</li> <li>Must be able to gain/maintain CEMS access for engine management purposes.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have a current/active U.S. driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Plans and scheduling experience within the last 10 years.</li> <li>RPA operations & deployment experience.</li> <li>Previous experience as engine manager with CEMS experience.</li> <li>Prior experience as a defense contractor.</li> <li>Previous MQ-9 plans and scheduling experience desired.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship. USAF equivalent position is Aircraft Mechanic Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Performs all daily launch/recovery duties in support of operational requirements.</li><li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li><li>Supports aircraft utilization and maintenance activity schedules.</li><li>Maintains accurate parts inventory during all maintenance activities.</li><li>Performs maintenance and repair tasks and ensures their successful completion.</li><li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability.</li><li>Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li><li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc.</li><li>Diagnoses malfunctions, isolate causes and corrects breaks.</li><li>Tests engine operations, using testing equipment to locate source(s) of malfunction.</li><li>Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li><li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices.</li><li>Disassembles and inspects parts for wear, warping, or other defects.</li><li>Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li><li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories.</li><li>Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li><li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions.</li><li>May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li><li>Must be able to work with little-to-no supervision.</li><li>Performs all other duties as assigned as requested.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Mechanic maintenance experience required.</li><li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li><li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li><li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications</p><ul><li>Associate degree in a relevant career field.</li><li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Aircraft Mechanic Experience within the last 10 years.</li><li>MQ-9 Experience as an Aircraft Mechanic.</li><li>MQ-9 Aircraft Composite Repair / Replacement Experience.</li><li>Highly desired to have a U.S. Passport valid for an additional two years with at least two facing pairs (four total) of blank Visa pages.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing calibration procedures and required functional tests in support of the KAF 4790 manual series. Responsibilities Overview The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities include maintenance and serviceability procedures for subsystem components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of airframes and power plants engineering principles, techniques, and methods in the maintainability of existing equipment and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Major Job Activities Description: · Apply and provide a thorough working knowledge of airframes and power plant systems to include aircraft modification procedures and experience with specific airframe, hydraulic, engine, and propeller systems, systems integration, system/component failure analysis, inspection, repair, and testing of airframes and power plant systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. · Performance abilities include performance of maintenance and servicing related aircraft components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation and incorporates applicable technical directives and bulletins. · Troubleshoots and/or repairs malfunctions in the aircraft airframes and power plants systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J MRC/MIMs, to include performing calibration procedures and required functional tests. · Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. · Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components · Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. · Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer’s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. · Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. · Performs applicable “O” and “I” level maintenance functions in support of In-Flight Refueling Systems and rebuild shop and Aircraft Tire &amp; Wheel rebuilding. · Perform scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment, pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated airframes and power plants equipment systems. · Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. · Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/ · Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures · When necessary, perform other duties and supervisory functions, critical to the function of the program and to assure compliance with the Performance Work Statement (PWS). Material &amp; Equipment Directly Used Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arm Qualifications EDUCATION and/or EXPERIENCE: Graduation from a standard four (4) year high school or equivalent (GED) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (https://www.eeoc.gov/poster) notice from the Department of Labor.</p> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsible for operating and maintaining power generation and aircraft arresting systems in accordance with the performance work statement. Operation and maintenance services inlude, but are not limited to: catapults, arresting gear, and associated mechanical, hydraulic, and control systems involved primarily in aircraft takeoff and landing operations. Duties include installing and maintaining visual landing aids; testing and maintaining launch and recovery equipment using electric and mechanical test equipment and hand tools; activating airfield arresting systems, such as crash barriers and cables, during emergency landing situations; directing aircraft launch and recovery operations using hand or light signals; and maintaining logs of airplane launches, recoveries, and equipment maintenance. Provide operation, maintenance, inspection, and repair of power generation systems and equipment such as diesel generators and light carts. Responsibilities + Installs, removes, and operates electrical power generating and control systems, automatic transfer switches, aircraft arresting systems, and associated equipment. Checks equipment for serviceability. Positions equipment such as gasoline and diesel engines, generators, switchgears, air compressors, and other power generating auxiliary equipment. Installs, positions, rewinds, and pretensions aircraft arresting systems. Certifies aircraft arresting systems as required. Checks installed equipment to ensure compliance with publications, policies, and directives. Inspects, tests, and services component systems such as safety, fuel, lubrication, cooling, air pressure, pumps, regulators, governors, and accessory equipment. Observes and interprets instruments such as ammeters, voltmeters, frequency meters, synchro scopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges. Adjusts engine generator systems to maintain proper voltage, current frequency, and synchronization. Synchronizes multiple generators. Operates high and low voltage switches, circuit breakers, rheostats, and other controls on switchgear and distribution panels. Performs electrical power control and distribution functions. + Maintains, modifies, and repairs electrical power generating and control systems, automatic transfer switches, aircraft arresting systems, and associated equipment. Performs inspections and interprets findings to determine corrective action. Identifies and records engine and generator malfunctions. Uses precision test equipment, troubleshoots malfunctions, and inspects parts for excessive wear and other conditions. Removes, repairs, and replaces defective power generating equipment components. Performs corrosion control. Inspects and replaces gauges and meters. Maintains aircraft arresting systems, including electrical, hydraulic, rewind, and pneumatic systems, and other electronic components. Bench checks components and subassemblies. Tests and calibrates repaired items. Reviews performance data and maintenance records to determine adequacy of maintenance. Interprets data related to electrical power generating and aircraft arresting systems to ensure overall mission success. + Maintains records. Posts entries on operation, inspection, and maintenance records. Records meter readings, wear and alignment measurements, fuel consumption, and other data in performance logs. Furnishes information for reports and recommends changes to correct defective equipment or improve operating procedures. Complies with environmental policies. + Ensure all work areas and equipment are kept clean, orderly and in a safe manner. + Performs quality and safety self-inspections. + Responsible for proper utilization and safeguarding of all government and contractor provided property (e.g., to include government facilities, equipment and tools). + Perform other duties as assigned in accordance with contractual, functional, and mission requirements. Qualifications Minimum Qualifications Education/Certifications: + Prior military service of AFSC 3E072, Power Production Journeyman + Must be MAAS/BAK-12 Factory Trained &amp; Certified + High school diploma or equivalent. + Must be a U.S. Citizen with a current, valid U. S. Passport and Driver’s License (able to drive manual transmission). + Must have and maintain a valid U. S. SECRET Security Clearance prior to deployment. + Must have the capability of obtaining an Air Force flight line driver’s license. + Must be able to pass a flight line access test and obtain flight line access badge. + Must be able to pass employment and deployment qualification requirements that include psychological, medical, dental, drug testing, background checks, etc. + Candidates must successfully complete both online and hands on CBRN (chemical, biological, radiological and nuclear) defense training. Training includes the successful fit testing of DOD provided protective gear. Experience: + Must have four years of experience in operation and maintenance of BAK-12 aircraft arresting systems and completed factory training on Mobile Aircraft Arresting Systems (MAAS)/BAK-12. + Shall have knowledge of principles of electronics and electricity including generation, conversion, transformation, distribution and utilization. + Must have three years of experience operating and maintaining prime power spot generators and backup generators. Skills: + Must be capable of giving and receiving instructions. + Must be fluent reading and speaking English. + Able and willing to work periods of long hours to meet mission requirements. + Military experience in a contingency environment and knowledge and experience working with government contracts preferred. Other Requirements: + Work will be outdoors and indoors. Work in extreme outside temperatures reaching 115 degrees and winds reaching 30mph may be required. Exposure to cold, dust, noise, and chemicals may occur. Overtime and shift work may be required depending on contractual needs. Employee must comply with all Federal, State and Local regulations and published Company work rules as well as written instructions. Task specific work environment training will be provided as required. Must be prepared to function in a wartime environment to support U. S. interests. 100% Overseas Assignment. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking Rig Electricians for deep drilling onshore rigs for our client in Kuwait. Key Responsibilities: Install new electrical equipment and systems as required, ensuring that installations are done in accordance with technical specifications and safety regulations. Run electrical wiring and conduit, install circuit breakers, panels, and other electrical infrastructure as needed. Test new installations to ensure proper operation and safety. Perform electrical maintenance and repairs on various equipment and systems. Conduct regular inspections to identify potential issues and develop preventative maintenance plans. Troubleshoot electrical problems and implement effective solutions. Collaborate with other departments to ensure electrical systems are integrated seamlessly. Maintain accurate records of electrical work and inspections. Comply with safety regulations and promote a culture of safety among the team. Respond to electrical emergencies, such as power outages or equipment failures, and take appropriate action to restore power and ensure safety. Participate in emergency drills and ensure readiness to address electrical issues in emergency situations. Stay up-to-date with industry trends and technological advancements. Maintain an adequate supply of parts for emergency repairs. Monitor the operational performance of the Company's equipment. Identify areas for improvement.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent and additional relevant electrical certifications or licenses.</li><li>Experience of 3+years as an Electrician in deep drilling land rigs is required.</li><li>Candidates from Canada, United States, Europe, Eastern Europe, Australia, China are preferred.</li><li>Strong knowledge of electrical systems, wiring, and equipment used in industrial or oil and gas settings.</li><li>Proficiency in diagnosing and repairing electrical issues.</li><li>Ability to read and interpret electrical schematics and diagrams.</li><li>Knowledge of safety regulations and best practices.</li><li>Ability to work in a fast-paced environment and handle multiple tasks.</li><li>Strong communication and interpersonal skills.</li><li>Willingness to work in various weather conditions and environments.</li></ul><p></p></section>

<p><br></p><p>Reports to the TLSF Manager. Responsible for the full spectrum of maintenance operations; oversee Go/No-Go Testing of all government furnished equipment retrograded from the forward deployed sites for redistribution. Manages refurbishment programs for deep cleaning, upgrade, repair and configuration of IGX and other electronic systems. Directs and supervises Maintenance Support Teams (MST) supporting communication towers, telephony switching systems, and other communication systems. Manage field and sustainment maintenance to all strategic communications systems under the command of the 160th Signal Brigade, its subordinate units and the RCC. Monitors production for compliance with scheduling directives, cost factors, and standards. Develops performance standards, conducts employee counseling, and makes suggestions for formal and informal performance appraisals. Manages the calibration of Government Furnished Property (GFP) test equipment assigned to the Program. Directs, controls, and supervises antenna and tower maintenance in their respective countries, or areas they may be deployed too. Plans and coordinates scheduled maintenance visits for antenna/towers as required. Responsible for providing trip reports to the TLSF Manager as work is performed and completed. Performs a variety of duties pertaining to the operation, maintenance and repair of antennas and associated mounting hardware, tower systems, waveguide, lighting equipment and grounding systems. Will be responsible for accountability of Government Furnished Property (GFP) in their possession or under their control.</p><p>Program: OMDAC-SWACA</p><p>This position offers company-paid housing and transportation, a completion bonus and tuition reimbursement program! You must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position.</p><p>Responsibilities</p><p>Provides guidance and mentoring to personnel assigned to the section. Processes Purchase Requests required to support daily maintenance operations. Reviews receipt, control and processing of work orders. Collects and analyzes data necessary to manage resources. Monitors material stock level to support maintenance activities. Advises the Program Management of the status of work orders and scheduling of maintenance schedule. May be required to prepare and present briefs on maintenance-related activities. Maintains situational awareness of logistics and maintenance activities at all operational sites, including the status of any operational, maintenance, and resource issues, including the glide path for the resolution of any of these issues. Manage and monitor the Test, Measurement and Diagnostic Equipment (TMDE) Repair and Calibration program. Ensures obligations are being fulfilled as per the Performance Work Statement (PWS). Monitors staffing levels and creates projections to ensure proper manning is maintained in all situations; to include adequate coverage during vacation/holiday periods and for replacement of personnel who are projected to depart. Provides direct communication and coordination with associated military counterparts (such as Brigade S-4 and S-3) to facilitate mission support. Establishes rapport and effectively maintains liaison and coordination between the working elements of the department, management, customers and staff. Help develop best/alternative solutions to maintain smooth operations. Will work with and in conjunction with other departmental sections to accomplish all required taskings. Supervises and directs the Antenna Maintenance Support Team (AMST) in the performance of on-site and off-site routine and emergency maintenance support on towers, antennas, transmission lines and associated equipment. Perform quality assurance/quality control inspections on work performed. Performs organizational level repair maintenance through off-site general Support maintenance of support equipment including disassembly, testing, fault isolation and piece part replacement. Also performs technical inspections to determine maintenance requirements and approximate repair costs. Coordinates with sites and Operations and Maintenance staff in scheduled/unscheduled maintenance to ensure maximum system availability is maintained. Conducts, attends, and prepares for meetings and briefings as required. Performs other duties and assignments assigned.</p><p><b>Qualifications</b></p><p>Security Clearance: Ability to obtain a National Agency Check with Inquires (NACI) in order to obtain a Common Access Card (CAC). Ability to obtain and maintain a Secret level security clearance is preferred.</p><p>Education / Certifications:</p><p>One-year related experience may be substituted for one year of education if a degree is required. High School diploma or GED required. Cardiopulmonary Resuscitation (CPR) Training &amp; Certification ( Provided by the contract. ) Tower training: Tower Safety &amp; Rescue; Height &amp; Harness Safety Course or equivalent Requires a training certificate which meets one of the following requirements: OSHA 1910 ( Fall Protection Requirements ) OSHA 1926 ( Fall Protection Requirements ) ANSI/ASSE Z359</p><p>Experience:</p><p>One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience. Experience with a customer service-oriented company. 3-5 years of supervisory preferred. Must have knowledge and comply with OSHA 29 CFR Standard 1PHONE_NUMBER for all tower and antenna work. Must have the ability to comprehend and interpret complex technical data. Must have familiarity with logistical, maintenance, and purchasing operations. Must be familiar with maintenance operations, transportation, logistical, supply and services, military operations. Experience with a customer service-oriented company.</p><p>Skills &amp; Technology Used:</p><p>Proficiency in using a computer - desktop or laptop. Proficiency in using Microsoft productivity software. Proficiency in using Email client software. Other software / work management tools as directed Harness and fall protection equipment</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Ability to obtain a National Agency Check with Inquires (NACI) in order to obtain a Common Access Card (CAC).</li><li>Ability to obtain and maintain a Secret level security clearance is preferred.</li><li>High School diploma or GED required.</li><li>Cardiopulmonary Resuscitation (CPR) Training &amp; Certification ( Provided by the contract. )</li><li>Tower training: Tower Safety &amp; Rescue; Height &amp; Harness Safety Course or equivalent</li><li>Requires a training certificate which meets one of the following requirements: OSHA 1910 ( Fall Protection Requirements ) OSHA 1926 ( Fall Protection Requirements ) ANSI/ASSE Z359</li><li>One year of related academic study above the high school level may be substituted for one year of experience up to a maximum of a 4-year bachelor's degree for three years general experience.</li><li>Experience with a customer service-oriented company.</li><li>3-5 years of supervisory preferred.</li><li>Must have knowledge and comply with OSHA 29 CFR Standard 1PHONE_NUMBER for all tower and antenna work.</li><li>Must have the ability to comprehend and interpret complex technical data.</li><li>Must have familiarity with logistical, maintenance, and purchasing operations.</li><li>Must be familiar with maintenance operations, transportation, logistical, supply and services, military operations.</li><li>Proficiency in using a computer - desktop or laptop.</li><li>Proficiency in using Microsoft productivity software.</li><li>Proficiency in using Email client software.</li><li>Other software / work management tools as directed</li><li>Harness and fall protection equipment</li><li>Must satisfy all host country requirements to legally work in the host country to include but not limited to the ability to obtain and maintain a host nation visa and host nation driver s license in order to be qualified for this position.</li></ul>

<strong>Overview</strong> <br> <br> <p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p> <br> <strong>Responsibilities</strong> <br> <br> <p>The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities include maintenance and serviceability procedures for subsystem components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of airframes and power plants engineering principles, techniques, and methods in the maintainability of existing equipment and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</p> <p> </p> <p> <strong>Major Job Activities</strong> </p> <p> <strong>Description:</strong> </p> <p> </p> <p> Apply and provide a thorough working knowledge of airframes and power plant systems to include aircraft modification procedures and experience with specific airframe, hydraulic, engine, and propeller systems, systems integration, system/component failure analysis, inspection, repair, and testing of airframes and power plant systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems.</p> <p> </p> <p> Performance abilities include performance of maintenance and servicing related aircraft components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation and incorporates applicable technical directives and bulletins.</p> <p> Troubleshoots and/or repairs malfunctions in the aircraft airframes and power plants systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J MRC/MIMs, to include performing calibration procedures and required functional tests.</p> <p> </p> <p> Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs.</p> <p> </p> <p> Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components</p> <p> </p> <p> Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions.</p> <p> Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control.</p> <p> Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system.</p> <p> Performs applicable O and I level maintenance functions in support of In-Flight Refueling Systems and rebuild shop and Aircraft Tire &amp; Wheel rebuilding.</p> <p> Perform scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment, pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated airframes and power plants equipment systems.</p> <p> Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures.</p> <p> Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/</p> <p> Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures</p> <p> When necessary, perform other duties and supervisory functions, critical to the function of the program and to assure compliance with the Performance Work Statement (PWS).</p> <br> <strong>Qualifications</strong> <br> <br> <p> <strong>EDUCATION and/or EXPERIENCE:</strong> </p> <p>Graduation from a standard four (4) year high school or equivalent (GED)</p> <p> </p> <p>This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance.<br> </p> <p> </p> <p> <strong>Material &amp; Equipment Directly Used</strong> </p> <p> </p> <p>Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems.</p> <p> </p> <p><br></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Skills and Behavioral Competencies</b></p><p><b>Communication:</b></p><ul><li> Effective verbal and written communication skills.</li><li>Effective communication with others (co-workers, supervisors, and other departments) through providing and exchanging information.</li></ul><p><b>Key Abilities and Skills:</b></p><ul><li>Knowledge of electricity and electronics.</li><li>Ability to assist with the repair and maintenance of electrical equipment.</li><li>Ability to read and interpret basic electrical drawings and schematics.</li><li>Ability to use electrical tools, equipment, and instruments safely.</li><li>Familiarity with the nature of work and the equipment and tools used in the company.</li><li>Manual skills.</li><li>Proficiency in work, and speed in performing assigned tasks.</li><li>Strong physical skills to stand for long hours during work.</li><li>Good skills in using tools and equipment.</li><li>Ability to work in a noisy and busy environment.</li><li>Adherence to all safety precautions.</li><li>Attention to detail and accuracy.</li><li>Knowledge of safety and quality requirements.</li><li>Ability to work effectively under pressure.</li><li>Good teamwork and communication skills.</li><li>Commitment to safety procedures and company policies.</li><li>Ability to maintain company property and confidentiality.</li></ul><p><b>Languages:</b></p><p>• Ability to communicate in <b>Arabic or English</b>, at least at a conversational level.</p><p><b>Responsibilities and Duties</b></p><p>• Assist in all work related to electrical installations that occur on machinery and production lines.</p><ul><li>Assist in monitoring the performance and condition of electrical equipment and machinery in the production department and report any potential faults or improper use of this machinery to the direct supervisor.</li><li>Follow all instructions and work procedures provided by the direct supervisor.</li><li>Prepare the required tools, equipment, materials, and instruments for inspection, maintenance, and repair activities.</li><li>Perform routine inspections and assist with preventive maintenance of electrical equipment and machinery.</li><li>Coordinate with relevant departments to ensure the availability of required spare parts and materials.</li><li>Apply all workplace health and safety rules and procedures during maintenance activities.</li><li>Coordinate with other maintenance teams involved in electrical maintenance and repair work.</li><li>Assist in maintaining and repairing control and operating systems, including control panels, measuring instruments, and control devices.</li><li>Assist in maintaining and repairing electrical distribution systems, including transformers and electrical switches.</li><li>Assist with the installation, testing, and commissioning of new electrical equipment.</li><li>Prepare technical reports related to maintenance and repair activities.</li><li>Maintain professional ethics and prioritize the company's interests.</li><li>Perform any other duties within the scope of the position as assigned by the supervisor.</li></ul><p><b>Required Skills &amp; Competencies</b></p><ul><li>Basic knowledge of electrical and electronic systems.</li><li>Ability to assist with the repair and maintenance of electrical equipment.</li><li>Ability to read and understand basic electrical drawings and schematics.</li><li>Ability to use electrical tools, equipment, and instruments safely.</li><li>Good understanding of the company's electrical equipment and machinery.</li><li>Good manual and practical skills.</li><li>Ability to perform assigned tasks efficiently and accurately.</li><li>Ability to stand for extended periods and work in noisy environments.</li><li>Strong attention to detail and accuracy.</li><li>Knowledge of workplace safety and quality requirements.</li><li>Ability to work effectively under pressure.</li><li>Good teamwork and communication skills.</li><li>Commitment to safety procedures and company policies.</li><li>Ability to maintain company property and confidentiality.</li></ul><p><b>Language Requirements:</b></p><ul><li>Ability to communicate in <b>Arabic or English</b>, at least at a conversational level.</li></ul><p><b>Educational Qualifications:</b></p><ul><li>Technical Diploma in <b>Electrical Engineering or Electrical Maintenance</b>.</li><li><b>High School Diploma</b>.</li></ul><p><b>Experience:</b></p><ul><li><b>Fresh Graduate</b>.</li><li><b>3 years of experience</b>.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Job Summary</p><p>Responsible for assisting the electrical maintenance team with the inspection, installation, maintenance, and repair of electrical equipment, machinery, production lines, control systems, and electrical distribution systems. The role supports preventive maintenance activities and ensures compliance with safety and quality standards.</p><p>Key Responsibilities</p><ul><li>Assist with electrical wiring and installation work on machinery and production lines.</li><li>Assist in monitoring the performance and condition of electrical equipment and machinery in the production department.</li><li>Report any potential faults, equipment malfunctions, or improper use of machinery to the direct supervisor.</li><li>Follow all instructions and work procedures provided by the direct supervisor.</li><li>Prepare the required tools, equipment, materials, and instruments for inspection, maintenance, and repair activities.</li><li>Perform routine inspections and assist with preventive maintenance of electrical equipment and machinery.</li><li>Coordinate with relevant departments to ensure the availability of required spare parts and materials.</li><li>Apply all workplace health and safety rules and procedures during maintenance activities.</li><li>Coordinate with other maintenance teams involved in electrical maintenance and repair work.</li><li>Assist in maintaining and repairing control and operating systems, including control panels, measuring instruments, and control devices.</li><li>Assist in maintaining and repairing electrical distribution systems, including transformers and electrical switches.</li><li>Assist with the installation, testing, and commissioning of new electrical equipment.</li><li>Prepare technical reports related to maintenance and repair activities.</li><li>Maintain professional ethics and prioritize the company's interests.</li><li>Perform any other duties within the scope of the position as assigned by the supervisor.</li></ul><p>Required Skills &amp; Competencies</p><ul><li>Basic knowledge of electrical and electronic systems.</li><li>Ability to assist with the repair and maintenance of electrical equipment.</li><li>Ability to read and understand basic electrical drawings and schematics.</li><li>Ability to use electrical tools, equipment, and instruments safely.</li><li>Good understanding of the company's electrical equipment and machinery.</li><li>Good manual and practical skills.</li><li>Ability to perform assigned tasks efficiently and accurately.</li><li>Ability to stand for extended periods and work in noisy environments.</li><li>Strong attention to detail and accuracy.</li><li>Knowledge of workplace safety and quality requirements.</li><li>Ability to work effectively under pressure.</li><li>Good teamwork and communication skills.</li><li>Commitment to safety procedures and company policies.</li><li>Ability to maintain company property and confidentiality.</li></ul><p>Language Requirements</p><ul><li>Ability to communicate in <b>Arabic or English</b>, at least at a conversational level.</li></ul><p><b>Educational Qualifications:</b></p><ul><li>Technical Diploma in <b>Electrical Engineering or Electrical Maintenance</b>.</li><li><b>High School Diploma</b>.</li></ul><p><b>Experience:</b></p><ul><li><b>Fresh Graduate</b>.</li><li><b>3 years of experience</b>.</li></ul><p><br></p></div>