وظائف فني كهرباء في الكويت

<p>Company : Leading company in Kuwait</p><p>Position : Electrical Design Engineer</p><p>Qualification : B.E/B.Tech in Electrical Engineering</p><p>Location : Kuwait</p><p>Salary : 600 - 700 KWD</p><p>Experience : Min 5 years</p><p>Company provides : Free Food, Accommodation &amp; local transportation</p><p>Interview mode : Online Interview</p><p>Job Description: Substation Design (Up to 400 kV), Review and develop, Single Line Diagrams (SLD), Protection schemes, Equipment layouts Coordinate GIS / AIS design requirements Ensure compliance with IEC and utility standards underground Cable Systems Design and review HV/EHV cable systems (up to 400 kV) Evaluate: Cable sizing, routing, and installation methods, Jointing and termination requirements Support technical submissions and approvals Overhead Transmission Lines Review and support design of OHL systems up to 400 kV</p><p><strong>Desired Candidate Profile</strong></p><p>Qualification : B.E/B.Tech in Electrical Engineering</p><p>Experience : Min 5 years</p>

<p>Minimum 6 years of overall experience in construction projects, specifically in instrumentation works within Oil &amp; Gas / Refinery / Petrochemical sectors. At least 2 years of experience in Cost &amp; Estimation functions. Experience in reviewing tender documents and preparing enquiries for subcontractors/vendors. Strong computer skills (MS Office). Gulf / overseas experience preferred.</p><p><strong>Desired Candidate Profile</strong></p><b>Preferred candidate profile</b><br>Bachelors Degree (B.E./ B.Tech ) in: Electrical &amp; Electronics Engineering Electronics &amp; Instrumentation Engineering (4-year full-time course)

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>To be responsible for the execution, supervision, and technical coordination of electrical works on site, ensuring compliance with contract specifications, approved drawings, and applicable codes (NFPA/IEC/local authority requirements as applicable to KNPC-regulated projects). The candidate will coordinate with the Project Manager, subcontractors, and Client/Consultant representatives to ensure timely execution, quality control, and adherence to safety standards.</p><p><br></p><p><b>Experience:</b> Minimum 10 years' relevant experience in electrical engineering, preferably within MEP/construction contracting environment</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Bachelor's degree in Electrical Engineering</li><li>Minimum 10 years' experience in electrical works within oil &amp; gas, industrial, or institutional construction projects</li><li>Prior experience with KNPC or similar authority-regulated projects preferred</li><li>Hands-on experience in fire alarm systems installation, testing, and commissioning</li><li>Strong knowledge of power distribution, lighting, cabling, and electrical systems installation, testing, and commissioning</li><li>Familiarity with NFPA and local fire authority (Kuwait Fire Force) requirements</li><li>Experience in shop drawing review, material submittals, and as-built documentation</li><li>Professional command of English (spoken and written) for technical correspondence and reporting</li><li>Valid Kuwait driving license and transferable residency</li><li>Ability to work full-time on-site on a daily basis</li></ul><p><br></p></div>

<p><h4>Job Description</h4> <p>The Aircraft Mechanic III performs the full range of military tactical aircraft maintenance and maintains, repairs, and modifies aircraft structures and structural components of complex to extreme difficulty.</p> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and apply technical expertise in restoring equipment condition and operation.</p> <p>Apply professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufacturer's manuals.</p> <p>Make entries in aircraft logs and records, and be responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.</p> <p>Plan, conduct, and supervise aircraft technical inspections.</p> <p>Compute basic weight and balance records.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Ensure compliance with aircraft configuration control, Army oil analysis program, and test measuring diagnostic equipment calibration.</p> <p>Provide lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards, and operational policies.</p> <p>Prepare evaluations, special reports, and records pertaining to aircraft maintenance, repair, and related activities.</p> <p>Perform other duties as requested.</p> <h4>Minimum Requirements</h4> <p>This role requires the candidate to obtain Disclosure and Barring Service (DBS) check through UK Government prior to deployment.</p> <p>Completion of high school or equivalent required.</p> <p>Five (5) or more years aviation maintenance experience within the past ten (10) years on that mission design series (MDS).</p> <p>Experience in maintenance, modification, and repair of tactical aircraft systems of the type being serviced and their associated components.</p> <p>Must be in possession of a passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</p> <p>Able to clear CENTCOM Medical for deployment.</p> <h4>Knowledge & Skills</h4> <p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.</p> <p>Broad knowledge of aircraft sheet metal/structural modifications and repair.</p> <p>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.</p> <p>Working knowledge of technical publications and logistics information systems.</p> <p>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</p> <p>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p> <h4>Physical Requirements / Working Environment</h4> <p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p> <p>Must be able to climb stairs, ramps, ladders, and work stands.</p> <p>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.</p> <p>May be required to lift heavy objects whose weight may exceed 50 pounds.</p> <p>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p> <p>Will handle dirty parts and lubricants.</p> <p>Will be required to wear proper personal protective equipment (PPE).</p> <p>Must be able to pass a respirator physical and fit test qualification.</p> <p>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</p> <p>Must be able to lift/push/pull minimum of 50 pounds.</p> <p>May work in maintenance shop or outside.</p> <p>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p> <p>May be exposed to extreme noise from operating equipment.</p> <p>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description<br></span><p>We are Sisco Jobs, a recruitment consultancy based in Trichy, Tamil Nadu. We are hiring on behalf of our client for the position of <b>Instrument &amp; Control Technician</b> in <b>Kuwait</b>. Our client is a reputed organization seeking skilled and motivated professionals to maintain and troubleshoot industrial instrumentation and control systems. If you meet the requirements below, apply early as positions are limited.<br></p><br>Key Responsibilities<br><ul><li>Install, inspect, and maintain field instruments and control systems.<br></li><li>Calibrate transmitters, gauges, sensors, and control valves.<br></li><li>Troubleshoot PLC, DCS, and instrumentation faults.<br></li><li>Perform preventive and corrective maintenance activities.<br></li><li>Read and interpret P&amp;ID drawings and wiring diagrams.<br></li><li>Ensure compliance with plant safety procedures.<br></li><li>Record maintenance activities and prepare reports.<br></li><li>Coordinate with maintenance and operations teams.<br></li></ul>Required Skills<br><ul><li>Instrument calibration and testing.<br></li><li>PLC and DCS troubleshooting.<br></li><li>Control valve maintenance.<br></li><li>Electrical and instrumentation fault diagnosis.<br></li><li>Preventive maintenance in industrial plants.<br></li></ul>Preferred Skills<br><ul><li>HART communicator knowledge.<br></li><li>Loop checking and commissioning.<br></li><li>Oil &amp; Gas or Process Plant experience.<br></li></ul>Work Experience Requirements<br><p>Candidates should have a <b>minimum of 7 years</b> of relevant experience in industrial instrumentation, maintenance, and control systems. Experience in oil &amp; gas, refinery, power, or process industries is preferred.<br></p><br>Education<br><ul><li><b>Minimum:</b> Diploma / B.E. in Instrumentation, Electronics, Electrical or related field <i>(typical)</i><br></li><li><b>Preferred:</b> Bachelor's Degree in a relevant engineering discipline<br></li><li><b>Additional Certifications:</b> Instrument Calibration / PLC / Safety Certifications <i>(typical)</i><br></li></ul>Contact Number - 9786888866<br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Electronica for Electrical Appliances is a Kuwait-based company providing integrated solutions across Electrical Appliances and Renewable Energy, with a focus on reliable products, professional engineering, and technical support.</p><p>Electronica is seeking a <b>Solar Energy Technician </b>to join its team in Kuwait.</p><p><br></p><p><b>Key Responsibilities</b></p><p><b><span></span></b></p><ul><li>Install solar panels on rooftops and ground-mounted structures. </li><li>Install mounting systems and ensure correct panel angles and orientation. </li><li>Install and connect DC cables between solar panels. </li><li>Install inverters, protection panels, and related electrical components. </li><li>Assist with system testing, commissioning, and safety checks. </li><li>Perform solar panel cleaning and routine preventive maintenance. </li><li>Follow all site safety procedures and technical guidelines.&nbsp;</li></ul><p><br></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Diploma or technical certification in solar energy, electrical technology, or a related field. </li><li>Minimum 2 years of experience in solar PV installation or maintenance. </li><li>Basic knowledge of electrical systems and solar PV components. </li><li>Ability to work outdoors and safely at heights. </li><li>Reliable, disciplined, and able to work effectively as part of a team.</li></ul><p><br></p></div>

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.USAF equivalent position is Aircraft Mechanic Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Performs all daily launch/recovery duties in support of operational requirements.</li><li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li><li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li><li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li><li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li><li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li><li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li><li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li><li>Must be able to work with little-to-no supervision.</li><li>Performs all other duties as assigned as requested.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Mechanic maintenance experience required.</li><li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li><li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li><li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications</p><ul><li>Associate degree in a relevant career field.</li><li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Aircraft Mechanic Experience within the last 10 years.</li><li>MQ-9 Experience as an Aircraft Mechanic.</li><li>MQ-9 Aircraft Composite Repair / Replacement Experience.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Location:</b></p><br><br>Kuwait City, Al Kuwayt, Kuwait<br><p><b>Job ID:</b></p><br><br>R0140514<br><p><b>Date Posted:</b></p><br><br>2026-08-12<br><p><b>Company Name:</b></p><br><br>HITACHI ENERGY ENGINEERING TECHNOLOGIES CO. (KSCC)<br><p><b>Profession (Job Category):</b></p><br><br>Engineering &amp; Science<br><p><b>Job Schedule:&nbsp;</b></p><br><br>Full time<br><p><b>Remote:</b></p><br><br>No<br><p><b>Job Description:</b></p><br><br><p><span><b>The opportunity</b></span></p><br><br><br><p>Join a team that specializes in providing remote and on-site services for protection systems in transmission and distribution substations, ensuring solutions that are timely, cost-effective, and aligned with customer expectations. Our work adheres to industry-standard processes, safety protocols, and best practices—delivering reliability and excellence every step of the way.</p><br><br><br><p><span><b>How you’ll make an impact&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</b></span></p><br><br><ul><li><p><span><span>Driving service sales and business development activities across assigned countries and market&nbsp;segments (e.g., Utilities, Power Generation, Oil &amp; Gas, EPCs, Industrial clients).</span></span></p><br><br></li><li><p><span><span>Performing relay testing, commissioning, maintenance, and troubleshooting at client substations.</span><br><span>Possess knowledge of structured programming, communication techniques, and protocols for Hitachi Energy relays and familiarity with&nbsp;other relays manufacturers is preferable.</span></span></p><br><br></li><li><p><span><span>Troubleshooting system protection problems and schemes effectively and understanding different protection and communication schemes and supervising the installation and commissioning of automation systems, ensuring full compliance with standards and best&nbsp;practices.</span></span></p><br><br></li><li><p><span><span>Demonstrate expertise in testing, commissioning, maintenance, and troubleshooting of protection systems for all equipment in&nbsp;substations up to 400 kV voltage level.</span></span></p><br><br></li><li><p><span><span>Experience in testing, commissioning, maintenance, and troubleshooting of protection systems for all equipment in&nbsp;power stations and refinery environments.</span></span></p><br><br></li><li><p><span><span>Training site operators in the use of works and ensure site-specific manuals and documentation are available before handover and are highly familiar with interlocking schemes and gas tripping schemes across all voltage levels from 380 V to 400 kV.</span></span></p><br><br></li><li><p><span><span>Consult with clients or their representatives to determine their needs and priorities.</span></span></p><br><br></li><li><p><span><span>Provide written procedures for switching, energization, isolation methods for testing, commissioning, and maintenance work.</span></span></p><br><br></li><li><p><span><span>Coordinate and oversee substation technicians and electricians, and serve as project manager, serve as the primary customer contact for specific projects, maintain a professional presentation when dealing with employees, clients, and suppliers and be well-versed in technical and safety precautions when working in live substations.</span></span></p><br><br></li><li><p><span><span>Possess leadership skills and the ability to lead, supervise, and assign work to the protection team and unnecessary outages while working in Brownfield substations or on any type of energized equipment and experience in troubleshooting electrical parts for various types of switchgear.&nbsp;</span></span></p><br><br></li><li><p><span><span>You will be responsible for ensuring compliance with applicable external and internal regulations, procedures, and guidelines.</span></span></p><br><br></li><li><p><span><span>Living Hitachi Energy’s core values safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.</span></span></p><br><br></li></ul><br><p><span><b>Your background</b>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</span></p><br><br><ul><li><p><span><span>A bachelor’s degree in electrical engineering is preferred.</span></span></p><br><br></li><li><p><span><span>Minimum 7 years of relevant experience is required.</span></span></p><br><br></li><li><p><span><span>Strong communication and interpersonal skills.</span></span></p><br><br></li><li><p><span><span>Ability to work independently and as part of a team.</span></span></p><br><br></li><li><p><span><span>Proficient in using testing and diagnostic equipment.</span></span></p><br><br></li><li><p><span><span>Ability to interpret and work from electrical drawings and schematics.</span></span></p><br><br></li><li><p><span><span>Strong organizational and time management skills.</span></span></p><br><br></li><li><p><span><span>Commitment to continuous improvement and learning.</span></span></p><br><br></li><li><p><span><span>Proficiency in both spoken &amp; written English language is required.</span></span></p><br><br></li></ul><br><br><p><b>Accessibility and reasonable accommodation</b></p><br><br><p><b>Qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a </b><span><b><u>general inquiry form</u></b></span><b> on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process.</b></p><br><br><br><p><b>This is solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes will not receive a response.</b></p><br><br><br><p><b>Use of Al and automated tools in recruitment</b></p><br><br><p><b>As part of our recruitment process, Hitachi Energy uses digital and automated tools, including Al-supported solutions, to assist with activities such as application screening, job matching, and interview scheduling. These tools are designed to support our recruiters and do not replace human decision-making. Candidate data is processed in accordance with applicable data protection and employment laws as well as </b><span><b><u>Hitachi's Global Data Privacy Notice.</u></b></span><b><br><span>Background Screening and Security Checks</span></b></p><br><br><p><b><span>As part of the hiring process, Hitachi Energy conducts pre-employment background checks that may include verification of employment history, education, criminal records, and other relevant information, in accordance with applicable laws.</span></b></p><br><br><p><b><span>For certain roles—particularly those involving access to sensitive information, financial responsibilities, client data, regulated environments, or security-sensitive functions—additional or more comprehensive background or security screenings may be required. These may include, but are not limited to, enhanced criminal history checks, credit history reviews (where legally permissible), sanctions screening, or other due diligence measures aligned with the responsibilities of the position.</span></b></p><br><br><p><b><span>The scope and depth of any background or security review will be determined based on the nature of the role and business necessity, and will always be conducted in compliance with applicable federal, state, and local laws. Candidates will be notified and, where required, asked to provide consent prior to the initiation of any such checks.</span></b></p><br><br><br> </div>

<p><h4>Position summary</h4> <p>Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards.</p> <p>Display advanced ability to read standard blueprints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks.</p> <p>Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters—ensuring all methods, materials and practices meet company standards and local and national codes—with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TVs. Use the Lockout/Tagout system before performing any maintenance work.</p> <p>Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds.</p> <p>Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets.</p> <p>Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs,</p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsible for operating and maintaining power generation and aircraft arresting systems in accordance with the performance work statement. Operation and maintenance services inlude, but are not limited to: catapults, arresting gear, and associated mechanical, hydraulic, and control systems involved primarily in aircraft takeoff and landing operations. Duties include installing and maintaining visual landing aids; testing and maintaining launch and recovery equipment using electric and mechanical test equipment and hand tools; activating airfield arresting systems, such as crash barriers and cables, during emergency landing situations; directing aircraft launch and recovery operations using hand or light signals; and maintaining logs of airplane launches, recoveries, and equipment maintenance. Provide operation, maintenance, inspection, and repair of power generation systems and equipment such as diesel generators and light carts. Responsibilities + Installs, removes, and operates electrical power generating and control systems, automatic transfer switches, aircraft arresting systems, and associated equipment. Checks equipment for serviceability. Positions equipment such as gasoline and diesel engines, generators, switchgears, air compressors, and other power generating auxiliary equipment. Installs, positions, rewinds, and pretensions aircraft arresting systems. Certifies aircraft arresting systems as required. Checks installed equipment to ensure compliance with publications, policies, and directives. Inspects, tests, and services component systems such as safety, fuel, lubrication, cooling, air pressure, pumps, regulators, governors, and accessory equipment. Observes and interprets instruments such as ammeters, voltmeters, frequency meters, synchro scopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges. Adjusts engine generator systems to maintain proper voltage, current frequency, and synchronization. Synchronizes multiple generators. Operates high and low voltage switches, circuit breakers, rheostats, and other controls on switchgear and distribution panels. Performs electrical power control and distribution functions. + Maintains, modifies, and repairs electrical power generating and control systems, automatic transfer switches, aircraft arresting systems, and associated equipment. Performs inspections and interprets findings to determine corrective action. Identifies and records engine and generator malfunctions. Uses precision test equipment, troubleshoots malfunctions, and inspects parts for excessive wear and other conditions. Removes, repairs, and replaces defective power generating equipment components. Performs corrosion control. Inspects and replaces gauges and meters. Maintains aircraft arresting systems, including electrical, hydraulic, rewind, and pneumatic systems, and other electronic components. Bench checks components and subassemblies. Tests and calibrates repaired items. Reviews performance data and maintenance records to determine adequacy of maintenance. Interprets data related to electrical power generating and aircraft arresting systems to ensure overall mission success. + Maintains records. Posts entries on operation, inspection, and maintenance records. Records meter readings, wear and alignment measurements, fuel consumption, and other data in performance logs. Furnishes information for reports and recommends changes to correct defective equipment or improve operating procedures. Complies with environmental policies. + Ensure all work areas and equipment are kept clean, orderly and in a safe manner. + Performs quality and safety self-inspections. + Responsible for proper utilization and safeguarding of all government and contractor provided property (e.g., to include government facilities, equipment and tools). + Perform other duties as assigned in accordance with contractual, functional, and mission requirements. Qualifications Minimum Qualifications Education/Certifications: + Prior military service of AFSC 3E072, Power Production Journeyman + Must be MAAS/BAK-12 Factory Trained &amp; Certified + High school diploma or equivalent. + Must be a U.S. Citizen with a current, valid U. S. Passport and Driver’s License (able to drive manual transmission). + Must have and maintain a valid U. S. SECRET Security Clearance prior to deployment. + Must have the capability of obtaining an Air Force flight line driver’s license. + Must be able to pass a flight line access test and obtain flight line access badge. + Must be able to pass employment and deployment qualification requirements that include psychological, medical, dental, drug testing, background checks, etc. + Candidates must successfully complete both online and hands on CBRN (chemical, biological, radiological and nuclear) defense training. Training includes the successful fit testing of DOD provided protective gear. Experience: + Must have four years of experience in operation and maintenance of BAK-12 aircraft arresting systems and completed factory training on Mobile Aircraft Arresting Systems (MAAS)/BAK-12. + Shall have knowledge of principles of electronics and electricity including generation, conversion, transformation, distribution and utilization. + Must have three years of experience operating and maintaining prime power spot generators and backup generators. Skills: + Must be capable of giving and receiving instructions. + Must be fluent reading and speaking English. + Able and willing to work periods of long hours to meet mission requirements. + Military experience in a contingency environment and knowledge and experience working with government contracts preferred. Other Requirements: + Work will be outdoors and indoors. Work in extreme outside temperatures reaching 115 degrees and winds reaching 30mph may be required. Exposure to cold, dust, noise, and chemicals may occur. Overtime and shift work may be required depending on contractual needs. Employee must comply with all Federal, State and Local regulations and published Company work rules as well as written instructions. Task specific work environment training will be provided as required. Must be prepared to function in a wartime environment to support U. S. interests. 100% Overseas Assignment. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p>Al Jazeera Real Estate Development Co. K.S.C.C (AJRE) founded in 2002, is a closed shareholding Company has an impressive 22-years of track record providing high-quality developments such as Sahara Kuwait Golf Resort, Murouj Mall &amp; Sahara Equestrian Resort.</p><br><p>AJRE continues to develop its business by expanding into related business lines and offering new products and services. AJRE is committed to the pursuit of excellence and will continue evaluating ways to strengthen policies and practices to promote the interests of shareholders, partners, and employees.</p><br><br>Job Description<br><p>Sahara Arena is seeking a Technical Assistant to support the Operations Manager in the daily technical operation and maintenance of the venue. The successful candidate will help ensure the arena is safe, event-ready, and operating efficiently by coordinating maintenance activities, reviewing technical event requirements, and providing technical support before, during, and after events – to a standard consistent with comparable local and regional arenas.</p><br><br>Qualifications<br><ul><li>Diploma or Bachelor’s degree in Engineering (Mechanical, Electrical, or related) or a related technical field.</li><li>2+ years’ experience in arenas, theatres, exhibition halls, stadiums, or live event production preferred.</li><li>Strong working knowledge of entertainment rigging, trusses, chain hoists/motors (including large-capacity grids), AV systems, professional sound and lighting, LED screens, and electrical power distribution/generators.</li><li>Ability to read and interpret technical drawings, rigging plans, load calculations, and event layouts.</li><li>Recognized rigging/safety certification (e.g., ETCP Rigger, IRATA, or equivalent), or willingness to obtain one, is an advantage.</li><li>Familiarity with CMMS or maintenance-tracking software for PPM and asset management.</li><li>Proficiency in Microsoft Office; AutoCAD or Vectorworks knowledge is a strong advantage.</li><li>Strong communication, organizational, and problem-solving skills, with the ability to stay calm under the time pressure of live event load-in/load-out.</li><li>Willingness to work flexible hours – including evenings, weekends, and public holidays – based on event schedules, and to provide on-call standby coverage during live shows.</li></ul><br>Additional Information<br><p><strong>Venue Operations &amp; Preventive Maintenance</strong></p><br><ul><li>Assist in the daily technical operation of the arena, including mechanical, electrical, fire/life-safety, rigging and AV systems.</li><li>Perform routine inspections and Preventive Planned Maintenance (PPM), logging all activity in the venue’s CMMS or maintenance-tracking system.</li><li>Coordinate maintenance team and supervise contractors and specialist vendors, verifying completed work meets venue and manufacturer standards.</li><li>Maintain accurate maintenance records, asset registers, and technical documentation (as-built drawings, rigging certificates, equipment manuals).</li><li>Ensure all building systems and event infrastructure – including the rigging grid up to its full rated capacity, power distribution, HVAC, and LED/AV systems – operate safely and efficiently.</li></ul><p><strong>Event Technical Support</strong></p><br><ul><li>Attend technical meetings and advance calls with event organizers, touring production teams, and contractors.</li><li>Review and validate incoming technical riders, stage plots, and rigging plans against venue capacities before approving load-ins.</li><li>Provide hands-on technical support during event setup, rehearsals, live events, and dismantling, including standby coverage for live shows.</li></ul><p><strong>Pre- &amp; Post-Event Responsibilities</strong></p><br><ul><li>Before each event: review technical submissions, verify rigging and roof/grid loads against certified limits, inspect hoists, trusses, chain motors, power distribution boards/generators and AV systems, and confirm the arena is fully event-ready.</li><li>After each event: inspect the venue and equipment for damage or faults, document maintenance requirements, coordinate necessary repairs with contractors, and ensure the arena is restored and ready for the next event.</li></ul><p><strong>Health, Safety &amp; Compliance</strong></p><br><ul><li>Support compliance with Kuwait Civil Defence, fire/life-safety, and recognized international rigging and entertainment-industry safety standards.</li></ul><br><br> </div>

<p><strong>Job Summary:</strong> Maintenance Technician - Utility is responsible for the operation, maintenance, and troubleshooting of utility systems, including ammonia Cooling Plant, HVAC, boilers, compressors, chillers, water treatment, and other essential plant utilities. The role ensures equipment efficiency, reliability, and compliance with safety and environmental regulations.</p><p><strong>Job duties include but are not limited to:</strong></p><ul><li>Perform preventive and corrective maintenance on ammonia cooling plants, boilers, pumps, air compressors, PHE HVAC systems, chillers, cooling towers, and water treatment plants to ensure continuous operation.</li><li>Diagnose and troubleshoot mechanical, and hydraulic issues in utility equipment.</li><li>Conduct inspections and ensure compliance with health, safety, and environmental standards.</li><li>Record and report maintenance activities, breakdowns, and spare part usage.</li><li>Assist in the installation and commissioning of new utility equipment.</li><li>Monitor energy consumption and recommend efficiency improvements.</li><li>Follow standard operating procedures (SOPs) and adhere to safety protocols.</li><li>Collaborate with the production and engineering teams to minimize downtime.</li><li>Maintain an inventory of tools, spare parts, and consumables required for maintenance tasks.</li><li>Respond promptly to emergency breakdowns and provide technical support.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma or technical certification in Mechanical, Electrical or Industrial Maintenance.</li><li>Minimum 3-5 years of experience in utility maintenance within a manufacturing or industrial setting.</li><li>Strong knowledge of boilers, chillers, air compressors, HVAC systems, and water treatment plants.</li><li>Experience with preventive maintenance programs and CMMS (Computerized Maintenance Management Systems).</li><li>Familiarity with industrial safety standards and regulatory compliance.</li><li>Ability to read and interpret technical drawings and manuals.</li><li>Hands-on experience with troubleshooting and repair of electrical and mechanical components.</li><li>Strong problem-solving and analytical skills.</li><li>Ability to work independently and as part of a team.</li><li>Excellent communication and documentation skills.</li><li>Attention to detail and a proactive approach to maintenance.</li><li>Willingness to work in shifts and respond to emergency calls.</li><li>Ability to lift heavy equipment and work in confined spaces.</li><li>Comfortable working in high-temperature and noisy environments.</li><li>Standing, climbing, and bending as required during maintenance tasks.</li><li>Industrial/manufacturing setting with exposure to mechanical and electrical equipment.</li><li>Requires adherence to safety protocols and use of PPE (Personal Protective Equipment).</li></ul>

Urgent Manpower Requirement<br><br>Safety Officer<br><br> Job Id :100193776<br><br>Hire Resume Writers<br><br>×<br><br>Please enter details to report job<br><br>Name*<br><br>Email*<br><br>Reason to report<br><br>Description<br><br>We are looking for manpower in the categories below for our ongoing O&M contract<br><br> Safety Officer - 1 Nos (Immediate joiners only preferred) Mechanical Rotating Equipment Technician - 1 Nos Electrical Maintenance Technician -1 No Instrumentation Maintenance Technician - 1 Nos<br><br>Please share your CVs with the expected salary at hr.servicelink@gmail.com<br><br>Basic Details<br><br>Location : Ahmadi , Kuwait<br><br>Qualification<br><br>Posted : 29 days ago<br><br>Job Type : Full-Time<br><br>Hire Resume Writers<br><br>Company : Kuwait Jobs<br><br>Contact Info<br><br>Mobile : Not-Mentioned<br><br>Alternate Mobile : Not-Mentioned<br><br>Email : hr.servicelink@gmail.com

<p>The Mechanical Metrology Engineer is the resident expert in his field and, in conjunction with the Kuwait Senior Engineer, provides engineering/consultant services to the GOK. Conducts research and studies new equipment to ensure that the latest developments in technique and equipment are included in metrology planning for future acquisition. Assists in the development and implementation of a Metrology QA Program as required. Assists in obtaining and maintaining laboratory QA accreditation. Assesses requirements and develops new measurement techniques and approaches related to mechanical, electro- mechanical, optical, electro-optical, chemical, and electro-chemical calibration methodology. Also performs analysis and evaluation of equipment test and performance requirements, and prescribes calibration approaches, test equipment and servicing requirements necessary to assure measurement traceability. Directs, conducts and evaluates the development of calibration procedures for assigned equipment categories. Conducts liaison and coordinates with technical societies and engineering facilities of other countries to remain current with the state-of-the-art and new measurement techniques. Responsible for laboratory facility and related environmental control development, operation and maintenance. Coordinates with civilian contractor and military civil engineering organizations on all projects affecting metrology facilities to ensure timely completion. Acts as consultant to GOK military and ministries on matters pertaining to metrology facilities and environmental requirements. Conducts liaison and coordination with technical societies and engineering facilities of other countries to remain current with state-of-the-art for metrology facilities and environmental control systems. Works with the Electrical Engineer on all matters associated with Power Production and Facilities. It is anticipated that Engineers will be assigned as these job descriptions state and other related specific tasking details and priorities will be determined and set by the Commander, KAFMB and communicated to the Contractor lead.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>An Associate's degree in mechanical engineering, physics or a related technical field from an accredited college or university and twelve (12) years of work experience operating, maintaining, troubleshooting, repairing, calibrating electronic precision measurement equipment and calibration laboratory reference standards. Includes qualification requirements D and E.</li><li>OR; Completion of a U.S. military precision measurement and calibration school and twelve (12) years of work experience in the metrology and calibration field.</li><li>Completion of a precision measurement and calibration school at an accredited school, or within a specialized calibration firm, and twelve (12) years of experience operating, maintaining, troubleshooting, repairing and calibrating physical/dimensional precision measurement equipment and calibration laboratory reference standards.</li><li>I Five (5) years of experience in technical oversight and training responsibilities of calibration and repair technicians with three (3) years within the last five (5) years.</li><li>Experience in researching requirements and maintaining calibration laboratory facility and related environmental control systems.</li><li>Must have an Active Secret US Government Clearance.</li><li>US Citizenship is required to obtain a Secret Clearance.</li></ul>

<p>Role &amp; Responsibilities We are seeking experienced Service Engineers, Senior Service Technicians, and Service Technicians for a leading Industrial Service Company in Kuwait specializing in compressed air systems. The candidate should have hands-on experience in maintenance, troubleshooting, overhaul, installation, commissioning, and repair of oil-injected rotary screw air compressors and compressed air dryers.</p><p>Compressor Brands Experience (Any One or More)</p><ul><li>Atlas Copco</li><li>Ingersoll Rand</li><li>Gardner Denver</li><li>Kaeser</li><li>Sullair</li><li>CompAir</li><li>ELGi</li><li>Chicago Pneumatic</li><li>Quincy</li><li>BOGE</li><li>Other internationally recognized industrial compressor brands</li></ul><p>Key Responsibilities</p><ul><li>Preventive and corrective maintenance of rotary screw air compressors.</li><li>Troubleshooting mechanical and electrical faults.</li><li>Major overhaul of compressor packages.</li><li>Airend inspection, repair, and replacement.</li><li>Bearing replacement and mechanical seal replacement.</li><li>Motor replacement and alignment.</li><li>Coupling alignment using dial indicators or laser alignment tools.</li><li>Maintenance of belt-drive and direct-drive compressor systems.</li><li>Oil system and cooling system servicing.</li><li>Replacement of oil separators, oil filters, and air filters.</li><li>Inlet valve, blowdown valve, minimum pressure valve, and thermostatic valve overhaul.</li><li>Solenoid valve troubleshooting and replacement.</li><li>Leak detection and repair.</li><li>Installation and commissioning of compressors after overhaul.</li><li>Performance testing and fault diagnosis.</li><li>Preparation of service reports and customer support documentation.</li></ul><p>Electrical Responsibilities</p><ul><li>Troubleshooting industrial electric motors.</li><li>Working knowledge of Star-Delta starters.</li><li>Experience with Soft Starters.</li><li>Experience with VFD/VSD drives.</li><li>Electrical control panel troubleshooting.</li><li>PLC and electronic compressor controller diagnostics.</li><li>Pressure and temperature sensor troubleshooting.</li><li>Reading and understanding electrical wiring diagrams.</li><li>Electrical fault diagnosis using multimeters and clamp meters.</li></ul><p>Air Dryer Experience</p><ul><li>Refrigerated Air Dryers.</li><li>Heatless Desiccant Dryers.</li><li>Heated Desiccant Dryers.</li><li>Automatic Condensate Drain Systems.</li><li>Air Filtration Systems.</li><li>Moisture Separators.</li><li>Dew Point Controllers.</li></ul><p>Tools Knowledge</p><p>Candidates should be familiar with :</p><ul><li>Dial Indicators</li><li>Laser Alignment Tools</li><li>Torque Wrenches</li><li>Bearing Pullers</li><li>Hydraulic Presses</li><li>Multimeters</li><li>Clamp Meters</li><li>Megger (Insulation Resistance Tester)</li><li>Pressure Gauges</li><li>Infrared Temperature Guns</li><li>Vibration Meters</li></ul><p>Other Requirements</p><ul><li>Good communication skills in English.</li><li>Ability to work independently at customer sites.</li><li>Strong troubleshooting skills.</li><li>Safety-conscious and team-oriented attitude.</li><li>Valid Passport preferred.</li><li>Ready to relocate to Kuwait.</li></ul><p><strong>Desired Candidate Profile</strong></p><h3>Preferred Candidate Profile</h3><p>Qualification</p><ul><li>ITI Mechanical / Electrical</li><li>Diploma in Mechanical Engineering</li><li>Diploma in Electrical Engineering</li><li>Equivalent Technical Qualification</li></ul><p>Experience</p><ul><li>3 to 15 years of relevant experience in industrial air compressor service and maintenance.</li><li>Hands-on field service experience is mandatory.</li><li>Experience in shutdowns, commissioning, and troubleshooting preferred.</li><li>Gulf experience will be an added advantage.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are looking for a dynamic Product Manager – Electrical to manage and grow our electrical product portfolio. </p><ul><li>The role involves leading the full product lifecycle, driving revenue and market share, defining pricing strategies, and supporting sales and market penetration.</li><li>Develop and deliver the product operating plan to achieve revenue growth, market share, profitability, and ROI targets.</li><li>Manage the complete product lifecycle from concept development to launch, promotion, and ongoing support.</li><li>Analyze customer needs and market trends to identify product gaps and growth opportunities.</li><li>Monitor competitor products to ensure strong positioning and differentiation in the electrical products market.</li><li>Work closely with sales teams to define product sales strategies and drive market penetration.</li><li>Prepare accurate product forecasts, business plans, and performance reports for management review.</li><li>Lead brand development initiatives to improve product visibility, awareness, and market share.</li><li>Determine product pricing and costing based on market research, volume projections, and customized project requirements.</li><li>Coordinate with suppliers and internal teams to ensure product availability, inventory control, and timely delivery.</li><li>Train and enable sales teams while supporting regulatory, government, and consultant approvals for products.</li></ul> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Bachelor’s degree in electrical engineering, Business Administration, Marketing, or a related field.</li><li>Excellent command in both languages (Arabic and English) </li><li>Minimum 5–8 years of experience in product management, preferably within the electrical.</li><li>Strong understanding of electrical products, systems, and market dynamics.</li><li>Proven ability to manage pricing, product strategy, and go-to-market plans.</li><li>Excellent analytical, communication, and stakeholder management skills.</li><li>Experience working with consultants, contractors, government authorities, and regulatory approvals is an advantage.</li><li>Strong technical knowledge.</li></ul></div>

<p><h4>Job description</h4> <p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Conduct the training and examination on all NDT methods to certify and to re-certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.</p> <p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p> <p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p> <p>Establish radiation areas for radiographic operations.</p> <p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p> <p>Perform nondestructive inspection on structures, components, and systems.</p> <p>Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p> <p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p> <p>Operate, maintain, and inspect nondestructive equipment.</p> <p>Perform operator maintenance and service inspections on shop equipment and tools.</p> <p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p> <p>Perform silver recovery functions.</p> <p>Handle and dispose of hazardous waste and materials.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum requirements</h4> <p>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</p> <p>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</p> <p>Three (3) years’ experience as a Non Destructive Inspection (NDI).</p> <p>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/DIDC Training).</p> <h4>Security clearance requirements</h4> <p>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance. Must be able to obtain and maintain facility credentials/authorization. US Citizenship is required to obtain a clearance and for facility credentials/authorization to work at this facility.</p> <h4>Additional and preferred qualifications</h4> <ul> <li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li> <li>Capable of assuming technical responsibility for the NDT facility and staff.</li> <li>Capable of selecting the method and technique for a specific inspection.</li> <li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li> <li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li> <li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities The KC-130J Avionics/COM/NAV Technician will troubleshoot and/or repair malfunctions in the aircraft avionics/communication/navigation systems and all other supporting aircraft systems that require avionics skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities will include the application of troubleshooting, maintenance, and servicing procedures to include the inspection and repair of aircraft wiring/wiring connector, breaker assemblies, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of electrical, avionics, and COM/NAV engineering principles, techniques, and methods necessary to repair and maintain aircraft, applicable equipment, and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Major Job Activities Description: • Applies and has a thorough working knowledge of COM/NAV and avionics systems to include; aircraft modification procedures and experience with specific avionics systems, e.g., data bus, antennas, software, displays, communications/navigation equipment, systems integration, system/component failure analysis, inspection, repair, and testing of COM/NAV and electrical systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. • Troubleshoots and/or repairs malfunctions in the aircraft avionics/communication/navigation systems and all other supporting aircraft systems that require avionics skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J maintenance requirement cards (MRC)s and maintenance instruction manuals (MIM)s, to include performing calibration procedures and required functional tests. • Performance abilities include maintenance and serviceability procedures to supported components, to include wiring and wiring connector condition, breaker assemblies, component removal, inspection, reinstallation, and incorporates applicable technical directives and bulletins. • Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. • Has a strong understanding and ability to interpret maintenance instruction manuals (MIMS) and all associated maintenance publications, orders, and directives and the processes to document such maintenance actions • Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components • Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. • Has the ability to review, interpret, and apply the assigned maintenance manual procedures in support of assigned maintenance actions. Apply practical knowledge of wiring schematics of aircraft COM/NAV and avionics systems and the interpretation of technical data contained within those schematics and/or sources of maintenance data • Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer’s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. • Removes, troubleshoots, inspects, reinstalls, and/or replaces aircraft COM/NAV and avionics components, radios, antennas, electrical wiring, and all other associated electronic components that support the operation and use of the aircraft systems/capabilities as directed by approved maintenance manuals/procedures and/or Maintenance Control • Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. • Performs applicable “O” and “I” level battery maintenance functions as required per applicable maintenance manuals. • Performs required tasks associated with EKMS as directed by Kuwait Air Force and NAVAIR • Performs scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment (life rafts, first aid kits, etc..), pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated aviation life support equipment, airframes, and power plants systems. • Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. • Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/ • Conducts off station maintenance when required. • When necessary, perform other duties and functions critical to the support of the program. Qualifications Education / Certifications: - High School Diploma - Must be able to obtain/maintain the following required certifications/qualifications: - Aviation Gas Free Engineering (AVGFE) certification - Auxiliary Power Unit (APU) run qualification -“I” Level Battery Maintenance certification - Applicable Support Equipment licensing - Electric Shop &amp; Comm Nav (210 &amp; 220) Collateral Duty Inspector (CDI) qualification - Electric Shop &amp; Comm Nav (210 &amp; 220) Collateral Duty Quality Assurance Representative (CDQAR) qualification - Corrosion Prevention and Control qualification - Confined Space Entry certification Experience: • Four years’ maintenance experience in the C-130J Avionics/Communications/Navigations specialty preferred.. • Must have a working knowledge of first aid procedures to be used in an emergency. • Must have a strong knowledge base of aviation maintenance programs, processes, and procedures (example: Safety, Tool Control, HAZMAT, inspection programs, administrative requirements, support equipment, calibration/torque programs &amp; procedures). Specific Requirements: • Must be United States (U.S.) citizen, be able to read, write, and understand the English language • Must be able to obtain a United States Passport. If you currently possess a United States Passport it must have at least 24 months of time remaining before expiration. • Must be able to obtain and maintain at a Secret Security Clearance. • Must have a valid U.S. Driver’s License. • Must be willing to follow Kuwait Labor Law policies and able to adhere to and comply with all Kuwaiti Labor and Immigration requirements. • Must be willing to administrate, maintain, and manage maintenance programs (ex. Tool Control, HAZMAT, FOD, MetCal, etc…) as required by local policies. • Must be willing and able to comply with all program functional requirements to include but not limited to: The performance of “I” Level maintenance functions in support of In-Flight Refueling Reel/system maintenance, NLG &amp; MLG Tire re-building, MLG Brake repair/rebuilding, Battery maintenance support, and Oxygen Regulator testing/repair. • Must be willing and able to deploy off-site as required to support Kuwait Air Force operations. • Must be willing to work flexible hours, to include day shift, night shift or weekend duty and travel as part of a maintenance recovery team as required. • Must have the ability to communicate clearly, concisely and follow instructions when directed on assigned tasks. • Must have skills and aptitude to cross train and/or support other maintenance technicians in completing assigned maintenance actions, to include but not limited to: The performance and completion of daily inspections (including the ability to inspect/sign off on all associated aircraft maintenance/technician specialties), marshalling/recovering aircraft, fueling, towing, mooring, and conducting post flight procedures to ensure aircraft are properly secured upon completion of maintenance. • As a Subject Matter Expert, must be willing to perform in-depth research, troubleshoot, and perform “O” and “I” level maintenance functions on all applicable aircraft systems and components necessary to return aircraft to a Full Mission Capable status; this includes determining material requirements, researching part numbers, ordering, tracking, and receiving materials as required to facilitate aircraft inspections/repairs. • Must be able to communicate directly with the customer, pilots, air crew members, management, and maintenance personnel to gather and relay pertinent data/information necessary to ensure aircraft depart timely and launches are not delayed. • Must have an in-depth knowledge of aircraft technical orders/job guides/publications—read, interpret, follow and comprehend schematic diagrams, drawings, charts and technical publications. • Must have an in-depth knowledge (aircraft/vehicle movement and safety/hazards) of flight line operations. • Must be able to overcome cultural differences and to think outside the box, innovate, and provide solutions to the many complex problems and obstacles associated with international contracting and desert climate operations. • Must perform as a team member, contributing to the success of the C-130J maintenance department. • Must be dependable and timely in managing assigned tasks, perform consistent quality maintenance. • Must have a proven ability to work independently with minimal direction. Material &amp; Equipment Directly Used Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems. Working Environment Environmental conditions are diverse and could range anywhere from an office environment where there is little or no physical discomfort to an environment where inclement weather may subject individuals to severe changes in temperature, less than adequate lighting, dust and wind. On occasion individuals may be required to work in areas where high noise hazards will prevail, and hearing protection is required. Physical Activities The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees are frequently required to sit and reach with hands and arms, stand, walk, stoop, kneel, crouch, or crawl, and climb on top of aircraft and maintenance platforms. Employees must occasionally lift and/or move up to 50 pounds What We Bring: At V2X we strive to be market competitive in our total reward offerings. Employee benefits include the following: • Healthcare coverage • Life insurance, AD&amp;D, and disability benefits • Retirement plan • Wellness programs • Paid time off, including holidays and leave of absences • Eligible Tuition Reimbursement • Learning and Development resources • Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p><h4>Job description</h4> <p>The aircraft mechanic III performs the full range of military tactical aircraft maintenance and maintains, repairs, and modifies aircraft structures and structural components of complex to extreme difficulty.</p> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation.</p> <p>Apply professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufacturer's manuals.</p> <p>Make entries in aircraft logs and records, and responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.</p> <p>Plan, conduct, and supervise aircraft technical inspections.</p> <p>Compute basic weight and balance records.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Ensure compliance with aircraft configuration control, Army oil analysis program, and test measuring diagnostic equipment calibration.</p> <p>Provide lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards, and operational policies.</p> <p>Prepare evaluations, special reports, and records pertaining to aircraft maintenance, repair, and related activities.</p> <p>Perform other duties as requested.</p> <h4>Minimum requirements</h4> <p>This role requires candidate to obtain Disclosure and Barring Service (DBS) check through UK Govt prior to deployment.</p> <p>Completion of high school or equivalent required.</p> <p>Five (5) or more years aviation maintenance experience within the past ten (10) years on that mission design series (MDS).</p> <p>Experience in maintenance, modification, and repair of tactical aircraft systems of the type being serviced and their associated components.</p> <p>Must be in possession of a passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</p> <p>Able to clear CENTCOM medical for deployment.</p> <h4>Knowledge & skills</h4> <ul> <li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.</li> <li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li> <li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.</li> <li>Working knowledge of technical publications and logistics information systems.</li> <li>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</li> <li>Participate in maintenance test flights and operation checks as required.</li> <li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical requirements / working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper personal protective equipment (PPE).</li> <li>Must be able to pass a respirator physical and fit test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<p><h4>Job Description</h4> <p>The Non-Destruction Inspection Technician (NDI) III inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Conduct the training and examination on all NDT methods to certify and to re-certify all operators and inspectors as outlined in NAS 410 or ASNT-CP-189.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.</p> <p>Interpret nondestructive inspection test results and provide information about defects to repair center.</p> <p>Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p> <p>Establish radiation areas for radiographic operations.</p> <p>Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p> <p>Perform nondestructive inspection on structures, components, and systems.</p> <p>Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p> <p>Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p> <p>Operate, maintain, and inspect nondestructive equipment.</p> <p>Perform operator maintenance and service inspections on shop equipment and tools.</p> <p>Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p> <p>Perform silver recovery functions.</p> <p>Handle and dispose of hazardous waste and materials.</p> <p>Perform other qualified duties as assigned.</p> <h4>Minimum Requirements:</h4> <ul> <li>Completion of high school or equivalent and U.S. military technical school or specialized training course is desired, certification of education level is required.</li> <li>Trained and certified as an Examiner (Level III) to monitor the NDT Program, interpret codes, standards and other contractual documents that control the NDT method, will be certified to review their own x-rays.</li> <li>Three (3) years’ experience as a Non Destructive Inspection (NDI).</li> <li>Must be able to pass and clear CENTCOM Army MOD Physical and requirements for deployment (will attend CRC/DIDC Training).</li> <li>Must be able to obtain Kuwait PCC clearance and Visa, prior to deployment.</li> </ul> <h4>Security Clearance Requirements:</h4> <ul> <li>Must be able to obtain and maintain a US Govt NAC-I (T1) Public Trust Security Clearance.</li> <li>Must be able to obtain and maintain facility credentials/authorization.</li> <li>US Citizenship is required to obtain a Clearance and for facility credentials/authorization to work at this facility.</li> </ul> <h4>Additional and Preferred Qualifications:</h4> <ul> <li>Have the skills and knowledge to interpret codes, standards, and other contractual documents that control the approved NDT method(s).</li> <li>Capable of assuming technical responsibility for the NDT facility and staff.</li> <li>Capable of selecting the method and technique for a specific inspection.</li> <li>Capable of preparing and verifying the adequacy of procedures in the method certified.</li> <li>Approve NDT procedures and other NDT related work instructions for technical adequacy in the method in which they are certified.</li> <li>Capable of providing or directing training, examination, and certification of personnel in the method in which they are certified.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and personnel in the technique/method in which they are certified.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Thorough comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. preferred.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical Requirements/Working Environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper Personal Protective Equipment (PPE).</li> <li>Must be able to pass a Respirator Physical and Fit Test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>