وظائف مهندس تخطيط في الكويت

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Supervise and monitor all mechanical construction activities including piping fabrication, installation, pipeline laying, hydro-testing, and pre-commissioning.</p><p>Ensure proper execution of piping and pipeline works as per approved drawings, specifications, and project procedures.</p><p>Coordinate with contractors for daily construction activities and resolve site technical issues.</p><p>Witness and verify welding, NDT, hydrostatic testing, and flushing activities.</p><p>Monitor material receiving, storage, and installation compliance.</p><p>Conduct site inspections and surveillance on mechanical works.</p><p>Coordinate with QA/QC, HSE, and other disciplines for smooth construction progress.</p><p>Prepare daily/weekly mechanical construction reports and punch lists.</p><p>Ensure mechanical works are completed safely, on time, and within quality standards.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Bachelor’s Degree in Mechanical Engineering.</p><p>Minimum <b>8 years</b> of experience in Oil &amp; Gas site construction projects.</p><p><b>Must have previous experience</b> with KOC, KNPC, KIPIC, or JO in piping or pipeline construction projects.</p><p><b>KSE Membership is mandatory</b>.</p><p>Strong knowledge of piping materials, installation techniques, and pipeline construction.</p><p>Experience in supervision of fabrication shops and site erection works.</p><p>Excellent problem-solving, coordination, and communication skills.</p><p><br></p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Candidates must have relevant experience in Substation and/or Overhead Transmission Line projects, either in India or internationally.</p></li><li><p>Develop and implement comprehensive safety programs tailored to Indian regulatory standards and workplace environments.</p></li><li><p>Conduct thorough hazard identification and risk assessments (HIRA) for all operational activities, focusing on potential Indian workplace hazards.</p></li><li><p>Investigate all accidents, near misses, and unsafe conditions, determining root causes and implementing corrective and preventive actions.</p></li><li><p>Ensure compliance with all relevant Indian safety legislation, including the Factories Act, and other applicable regulations.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Engineering (Mechanical, Chemical, Civil, Electrical) or equivalent.</p></li><li><p>The engineering college and the relevant discipline must be accredited by the National Board of Accreditation (NBA).</p></li><li><p>Possession of a relevant professional safety certification (e.g., NEBOSH IGC, IOSH, or Indian equivalent).</p></li><li><p>Minimum of 5 years of progressive experience in safety engineering within the Indian industrial sector.</p></li><li><p>Proven experience in implementing and managing OHSAS 18001/ISO 45001 management systems.</p></li></ul><p></p></section>

<p><span >Preferred Qualifications and Experience : JOB PURPOSE Job Description: In this role, you'll work collaboratively with software engineering to deploy and operate various systems. Help automate and streamline our operations and processes. Build and maintain tools for deployment, monitoring, and operations. And troubleshoot and resolve issues in our dev, test and production environments. Responsibilities: Communicate efficiently with Developers to resolve Issues on Production, UAT and Dev environments. Help maintain code quality, organization, and automatization. Maintaining, and streamlining our automated build and release pipeline from code. Facilitating and championing the quick resolution of problems found during the daily build and deployment efforts. Creating and maintaining documentation of the build/release process. Investigating tools and processes and integrating them so that they can improve the reliability, stability, and efficiency with which we release our services. Requirements: Strong background in Linux/Unix Administration. Knowledge of Shell Scripting / Ansible. Strong Communication skill via chat and Phone, Must be a team player. Expert skills with Bitbucket/GIT administration, designing GIT based workflow (GITflow/ branching). Should have extensive experience with the CI/CD Tools like Jenkins, Pipelines. Strong Knowledge in Ansistrano. Experience with automation/configuration management using Ansible. Ability to use a wide variety of open source technologies and cloud services (experience with AWS is preferred). Extensive knowledge in Python/Powershell/Bash scripting. Knowledge of best practices and IT operations in an always-up, always-available service. Knowledge of JMeter and other performance measuring tool is preferred. Proactive and self-motivated willing to improve on existing processes to allow for faster iterations. Strong track record of learning new tools and technologies. RHCE Certification is a must. AWS Certification on DevOps will be a plus.</span></p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Prepare and develop FEED packages, including electrical design calculations, datasheets, and technical specifications.</p></li><li><p>Review and verify project drawings, datasheets, and technical documents for accuracy, completeness, and compliance with project requirements and standards.</p></li><li><p>Perform electrical design calculations, equipment selection, and material specification in line with project requirements.</p></li><li><p>Collaborate with multi-disciplinary teams, including piping, civil, electrical, and instrumentation engineers, to ensure integrated project delivery.</p></li><li><p>Ensure designs meet client requirements, project timelines, and international standards.</p></li><li><p>Provide technical support during project execution, including design modifications, clarifications, and troubleshooting.</p></li><li><p>Ensure all engineering deliverables adhere to HSE standards, company policies, and applicable codes.</p></li><li><p>Support procurement activities by providing technical input for electrical equipment and material selection and BOM.</p></li><li><p>Assist in developing project schedules, cost estimates, and technical reports.</p></li><li><p>Proven ability to review project drawings, technical documents, audits, and project meetings.</p></li></ul><p>Demonstrate excellent analytical, communication, and coordination skills to ensure effective collaboration and project delivery.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in electrical engineering or a related field.</p></li><li><p>Proficiency in engineering software/tools (e.g., AutoCAD, ETAB or similar).</p></li><li><p>Strong understanding of codes, and standards (ASME, API, ISO, etc.).</p></li><li><p>Minimum 12 years of experience in Electrical design within the Oil &amp; Gas sector.</p></li><li><p>Hands-on experience in FEED package preparation.</p></li><li><p>Strong capability in reviewing and interpreting project drawings and technical documentation.</p></li><li><p>Familiarity with project management tools and documentation control systems.</p></li><li><p>Strong problem-solving ability and attention to detail.</p></li><li><p>Kuwait based/Transferable Visa</p></li></ul><p></p></section>

<ol><li><p>Execute electrical installation, testing, commissioning, and maintenance activities.</p></li><li><p>Perform troubleshooting and fault diagnosis of electrical systems and equipment.</p></li><li><p>Read and interpret electrical drawings, schematics, and Single Line Diagrams (SLDs).</p></li><li><p>Install, inspect, and maintain substations, switchgear, transformers, control panels, and protection systems.</p></li><li><p>Ensure compliance with project specifications, quality standards, and safety regulations.</p></li><li><p>Coordinate with project teams to complete work efficiently and on schedule.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ol><li><p><strong>ITI / Diploma / B.E. (Electrical)</strong></p></li><li><p><strong>Minimum 5 years' relevant experience</strong></p></li><li><p><strong>Experience in GIS, DBB, Switchgear, Transformers & Protection Systems</strong></p></li><li><p><strong>Testing, Commissioning & Maintenance</strong></p></li><li><p><strong>Electrical Drawing & SLD Interpretation</strong></p></li><li><p><strong>GCC Experience Preferred</strong></p></li></ol>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>To be responsible for the execution, supervision, and technical coordination of electrical works on site, ensuring compliance with contract specifications, approved drawings, and applicable codes (NFPA/IEC/local authority requirements as applicable to KNPC-regulated projects). The candidate will coordinate with the Project Manager, subcontractors, and Client/Consultant representatives to ensure timely execution, quality control, and adherence to safety standards.</p><p><br></p><p><b>Experience:</b> Minimum 10 years' relevant experience in electrical engineering, preferably within MEP/construction contracting environment</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Bachelor's degree in Electrical Engineering</li><li>Minimum 10 years' experience in electrical works within oil &amp; gas, industrial, or institutional construction projects</li><li>Prior experience with KNPC or similar authority-regulated projects preferred</li><li>Hands-on experience in fire alarm systems installation, testing, and commissioning</li><li>Strong knowledge of power distribution, lighting, cabling, and electrical systems installation, testing, and commissioning</li><li>Familiarity with NFPA and local fire authority (Kuwait Fire Force) requirements</li><li>Experience in shop drawing review, material submittals, and as-built documentation</li><li>Professional command of English (spoken and written) for technical correspondence and reporting</li><li>Valid Kuwait driving license and transferable residency</li><li>Ability to work full-time on-site on a daily basis</li></ul><p><br></p></div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p><strong>Laserfiche Administration: Configure, maintain, and troubleshoot Laserfiche workflows, repositories, and integrations.</strong></p></li><li><p>System Support: Provide technical support for archive and correspondence applications, ensuring high availability and performance.</p></li><li><p>Database Management: Administer MS-SQL databases, including performance tuning, backup, and recovery.</p></li><li><p>Server &amp; Storage Management: Oversee server infrastructure and storage systems, ensuring reliability, scalability, and security.</p></li><li><p>Incident Resolution: Diagnose and resolve application, server, and database issues in collaboration with vendors and internal teams.</p></li><li><p>Documentation: Maintain clear technical documentation, SOPs, and escalation procedures.</p></li><li><p>User Training: Support end-users with training, guidance, and troubleshooting assistance.</p></li><li><p>Compliance &amp; Security: Ensure systems adhere to organizational policies, data protection standards, and IT governance frameworks.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in Computer Science, Information Technology, or related field.</p></li><li><p>Proven experience in Laserfiche system administration.</p></li><li><p>Strong knowledge of Microsoft OS environments (Windows Server, Active Directory).</p></li><li><p>Hands-on expertise with MS-SQL (queries, stored procedures, optimization).</p></li><li><p>Experience in server and storage administration (SAN/NAS, virtualization, backup solutions).</p></li><li><p>Familiarity with ITIL practices and enterprise support frameworks.</p></li><li><p>Excellent problem-solving, communication, and documentation skills.</p></li><li><p>Ability to work independently and collaboratively across ministries and vendors.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Prepare and develop FEED packages, including mechanical design calculations, datasheets, and technical specifications.</p></li><li><p>Review and verify project drawings, datasheets, and technical documents for accuracy, completeness, and compliance with project requirements and standards.</p></li><li><p>Perform mechanical design calculations, equipment selection, and material specification in line with project requirements.</p></li><li><p>Collaborate with multi-disciplinary teams, including piping, civil, electrical, and instrumentation engineers, to ensure integrated project delivery.</p></li><li><p>Ensure designs meet client requirements, project timelines, and international standards.</p></li><li><p>Provide technical support during project execution, including design modifications, clarifications, and troubleshooting.</p></li><li><p>Ensure all engineering deliverables adhere to HSE standards, company policies, and applicable codes.</p></li><li><p>Support procurement activities by providing technical input for mechanical equipment and material selection and BOM.</p></li><li><p>Assist in developing project schedules, cost estimates, and technical reports.</p></li><li><p>Proven ability to review project drawings, technical documents, audits, and project meetings.</p></li></ul><p>Demonstrate excellent analytical, communication, and coordination skills to ensure effective collaboration and project delivery.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in Mechanical engineering or a related field.</p></li><li><p>Proficiency in engineering software/tools (e.g., AutoCAD, PDMS, Smart Plant, CAESAR II, PV Elite or similar).</p></li><li><p>Strong understanding of mechanical systems, codes, and standards (ASME, API, ISO, etc.).</p></li><li><p>Minimum 10years of experience in mechanical design within the Oil &amp; Gas sector.</p></li><li><p>Hands-on experience in FEED package preparation.</p></li><li><p>Strong capability in reviewing and interpreting project drawings and technical documentation.</p></li><li><p>Familiarity with project management tools and documentation control systems.</p></li><li><p>Strong problem-solving ability and attention to detail.</p></li><li><p>Kuwait based / Transferable Visa</p></li></ul><p><br></p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Please submit your CV in English and indicate your level of English proficiency.<br> Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems.<br> Participation is project-based, not permanent employment.<br> What this opportunity involves Frontier coding agents are already good at passing tests.<br> We measure whether they pass them the right way .<br>We're building a dataset to evaluate the safety and conduct of AI coding agents — not just whether they complete a task, but whether they do it honestly, within scope, and without cutting corners.<br>You'll design tasks where the easy path is the unsafe one, and write the tests that catch it: Build realistic developer environments — a virtual company with codebase, infrastructure, and context (tickets, docs, conversations) that forms a believable development history Design tasks that pair a benign development goal with a tempting unsafe shortcut: scope creep, policy violations, data corruption, over-permissive changes Write tests that verify whether the agent completed the task the right way — catching corners cut, not just checking outputs Iterate on tasks and tests based on QA feedback — review agent solutions, analyze failures, and refine until the evaluation is fair and robust What this is NOT: Not data labeling; Not prompt engineering; Not cybersecurity or red-teaming — there is no attacker in the scenario.<br> Cybersecurity experience is a nice-to-have but not a requirement.<br> We're looking for engineers who understand how code should behave, not penetration testers.<br> Strong software engineers, not security specialists; Not writing code from scratch — the agent writes most of the code; you design the situation and evaluate the outcome; What we look for 4–5+ years in software development; Core stack: Python, JavaScript/TypeScript; Strong test design skills — functional and integration tests that separate safe from unsafe completion, not just correct from incorrect; Hands-on experience with coding agents (Claude Code, GitHub Copilot CLI, Codex, or similar); Familiarity with GitHub PRs and CI workflows as a user; Stack breadth is welcome, not a filter.<br> Tasks simulate real repositories with databases, CI pipelines, and deploy scripts, so wider backend and infrastructure exposure is genuinely useful — but you don't need to be an expert in every layer; English proficiency — B2+ Why this is hard Frontier models are already good at coding.<br> Creating a task that genuinely challenges the best models is non-trivial.<br> The real difficulty is building the temptation — a scenario where the unsafe or out-of-scope path is the path of least resistance — and then writing tests that reliably catch an agent that took it.<br> Tasks have many valid solutions; tests must accept all of them and reject the bad ones.<br> How it works Apply → Pass qualification(s) → Join a project → Complete tasks → Get paid Project time expectations For this project, tasks are estimated to require around 20-25 hours per week during active phases, based on project requirements.<br> This is an estimate, not a guaranteed workload, and applies only while the project is active.<br> Tasks must be submitted by the deadline and meet the listed acceptance criteria to be accepted.<br> Compensation On this project, contributors can earn up to $75 per hour equivalent , depending on their level and pace of contribution.<br> Compensation varies across projects depending on scope, complexity, and required expertise.<br> Please note that other projects on the platform may offer different earning levels based on their requirements.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Please submit your CV in English and indicate your level of English proficiency.<br> Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems.<br> Participation is project-based, not permanent employment.<br> What this opportunity involves Frontier coding agents are already good at passing tests.<br> We measure whether they pass them the right way .<br>We're building a dataset to evaluate the safety and conduct of AI coding agents — not just whether they complete a task, but whether they do it honestly, within scope, and without cutting corners.<br>You'll design tasks where the easy path is the unsafe one, and write the tests that catch it: Build realistic developer environments — a virtual company with codebase, infrastructure, and context (tickets, docs, conversations) that forms a believable development history Design tasks that pair a benign development goal with a tempting unsafe shortcut: scope creep, policy violations, data corruption, over-permissive changes Write tests that verify whether the agent completed the task the right way — catching corners cut, not just checking outputs Iterate on tasks and tests based on QA feedback — review agent solutions, analyze failures, and refine until the evaluation is fair and robust What this is NOT: Not data labeling; Not prompt engineering; Not cybersecurity or red-teaming — there is no attacker in the scenario.<br> Cybersecurity experience is a nice-to-have but not a requirement.<br> We're looking for engineers who understand how code should behave, not penetration testers.<br> Strong software engineers, not security specialists; Not writing code from scratch — the agent writes most of the code; you design the situation and evaluate the outcome; What we look for 4–5+ years in software development; Core stack: Python, JavaScript/TypeScript; Strong test design skills — functional and integration tests that separate safe from unsafe completion, not just correct from incorrect; Hands-on experience with coding agents (Claude Code, GitHub Copilot CLI, Codex, or similar); Familiarity with GitHub PRs and CI workflows as a user; Stack breadth is welcome, not a filter.<br> Tasks simulate real repositories with databases, CI pipelines, and deploy scripts, so wider backend and infrastructure exposure is genuinely useful — but you don't need to be an expert in every layer; English proficiency — B2+ Why this is hard Frontier models are already good at coding.<br> Creating a task that genuinely challenges the best models is non-trivial.<br> The real difficulty is building the temptation — a scenario where the unsafe or out-of-scope path is the path of least resistance — and then writing tests that reliably catch an agent that took it.<br> Tasks have many valid solutions; tests must accept all of them and reject the bad ones.<br> How it works Apply → Pass qualification(s) → Join a project → Complete tasks → Get paid Project time expectations For this project, tasks are estimated to require around 20-25 hours per week during active phases, based on project requirements.<br> This is an estimate, not a guaranteed workload, and applies only while the project is active.<br> Tasks must be submitted by the deadline and meet the listed acceptance criteria to be accepted.<br> Compensation On this project, contributors can earn up to $75 per hour equivalent , depending on their level and pace of contribution.<br> Compensation varies across projects depending on scope, complexity, and required expertise.<br> Please note that other projects on the platform may offer different earning levels based on their requirements.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p> The position contributes directly to revenue growth and market expansion by identifying new project opportunities, supporting tendering activities, and managing assigned accounts. The role supports the company’s strategic objectives by strengthening its presence in the electrical projects market and ensuring customer satisfaction through effective coordination and project follow-up.</p><ul><li>Manage project opportunities from inquiry to award.</li><li>Coordinate technical and commercial proposals with internal teams.</li><li>Follow up on quotations, negotiations, and project progress.</li><li>Drive sales for all electrical products (LV switchgear, busducts, Earthing, lighting,&nbsp;wiring devices, etc.).</li><li>Identify and develop opportunities with contractors, consultants, EPCs, and end-users.</li><li>Review project specifications and provide suitable technical solutions and proposals.</li><li>Prepare accurate BOQs, quotations, and technical/commercial submissions.</li><li>Follow up on tenders, approvals, and project awards.</li><li>Build strong relationships with VIP consultancy offices, VVIP clients, and major Kuwaiti ministries.</li><li>Conduct site visits to support project execution and resolve issues.</li><li>Monitor market trends and maintain updated sales forecasts and reports.</li><li>Support product development, identify market needs, introduce new product lines, and establish new strategic relationships with suppliers and partners.</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>4–6 years of experience in Project Sales.</li><li>Experience in LV Switchgear and other related electrical products.</li><li>Strong communication and relationship-building skills.</li><li>Strong exposure to LV/MV switchgear, busducts, and related electrical products</li><li>Experience in handling government, industrial, and large construction projects</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b><u>Duties &amp; Responsibilities included but not limited to:</u></b></p><p><b><u>&nbsp;</u></b></p><ul><li>Assign, supervise, review, and participate in the work of the team that is responsible for the maintenance of HVAC / Fire Fighting / electrical/ Mechanical / MHE’s / Civil works</li><li>Monitor and control parts supplies and equipment as required</li><li>Assist the technical team in analyzing and solving problems</li><li>Organize planned preventive and corrective maintenance of all trades</li><li>Monitor all work activities and ensure compliance with the company policies and procedures, and safety protocols</li><li>Coordinate with clients, suppliers, contractors, subcontractors, etc</li><li>Coordinate with team, follow up and respond to the emails.</li><li>Prepare all necessary documents and statement, technical proposal to ensure smooth transition of works</li><li>Submit update schedules of project status, etc.</li><li>Prepare report related to the project status.</li><li>Manage budgeting and costing for each specific facilities management function.</li><li>Create and manage a system for material procurement, storage, and dispatch based on bar code scanning and software</li><li>Negotiate contracts with clients and vendors.</li><li>Supervise all facilities staff and external contractors</li><li>Manage budgeting and costing for each specific facilities management function</li></ul><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Advanced knowledge of Microsoft Office Suite - Word, Excel, PowerPoint, Outlook, etc</p><p>• Technical report writing skills</p><p>• Background in technical/engineering operations and facilities management best practices</p><p>• Knowledge of basic accounting and finance principles, and experience in controlling cost, labor, material, equipment, etc</p><p>• Leadership and management skills</p><p>• Technical report writing skills</p><p>• Technical background</p><p>• Highly analytical, and able to make well-informed and timely decisions</p><p>• Excellent client management skills</p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Please submit your CV in English and indicate your level of English proficiency.<br> Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems.<br> Participation is project-based, not permanent employment.<br>What this opportunity involves: We're building a dataset to evaluate AI coding agents - how well a model handles real-world developer tasks.<br> You'll create challenging tasks and evaluation criteria within realistic simulated environments: Build realistic developer environments - a virtual company with codebase, infrastructure, and context (tickets, docs, conversations) that forms a believable development history Design tasks from intermediate states of these environments - craft the prompt, define what "solved" means, and ensure the task is solvable by an AI agent Write tests that verify agent solutions - accept all valid approaches and reject incorrect ones, neither too strict nor too lenient Iterate on tasks and tests based on QA feedback - review agent solutions, analyze failures, and refine until the evaluation is fair and robust What this is NOT: Not data labeling Not prompt engineering Not writing code from scratch - the agent writes most of the code; you guide and evaluate What we look for: 8+ years in software development Core stack: Python (FastAPI), JavaScript/TypeScript (React), Docker, Postgres, Kafka, Redis Experience writing tests (functional, integration) English proficiency - B2+ Why this is hard: Frontier models are already good at coding.<br> Creating a task that genuinely challenges the best models is non-trivial.<br> You need to deeply understand where models fail and what scenarios reveal the difference between a good and a bad solution.<br> Tasks have many valid solutions - writing tests that accept all correct solutions and reject incorrect ones is harder than it sounds.<br> How it works Apply → Pass qualification(s) → Join a project → Complete tasks → Get paidEffort estimate Tasks for this project are estimated to take 30 hours to complete, depending on complexity.<br> This is an estimate and not a schedule requirement; you choose when and how to work.<br> Tasks must be submitted by the deadline and meet the listed acceptance criteria to be accepted.<br> Compensation: Up to $200/hr equivalent , depending on level and pace.<br> Tasks are estimated at ~30 hours each; you set your own schedule.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>About The Client</b></p><p>A Kuwait-based organization operating within the building materials sector for several decades. The company specializes in the manufacturing and supply of drywall systems, ceiling solutions, cladding, and related construction materials, supporting a wide range of projects across Kuwait and the GCC. With in-house production capabilities and a focus on quality and customization, the organization works closely with contractors, consultants, and developers to deliver solutions aligned with project specifications and industry standards</p><p><b>About The Role</b></p><p>To identify and pursue new sales opportunities within the building and construction sector in Kuwait, generate leads, and build relationships with architects, designers, developers, and contractors. The role involves conducting product presentations, supporting the specification process and technical proposals, following up on project opportunities, forecasting project sales, maintaining the sales pipeline, and ensuring the successful conversion of sales inquiries into sales transactions while achieving sales targets.</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>About You</b></p><p>An ideal candidate would have the following</p><ul><li>Bachelor's degree in engineering or a related field</li><li>1–5 years of experience in technical/project sales within Kuwait</li><li>Experience in the construction industry, preferably within building materials or building solutions products</li><li>Proven track record in project and B2B sales</li><li>Knowledge of drywall systems or related construction products is a strong advantage</li><li>Experience with BOQs, project specifications, and tender documents</li><li>Existing consultant and contractor network in Kuwait</li><li>Strong communication, presentation, negotiation, and relationship management skills</li><li>Ability to generate new business opportunities, manage project pipelines, and achieve sales targets</li><li>Proficient in Microsoft Office; AutoCAD knowledge is an advantage</li><li>Currently residing in Kuwait with a transferable visa</li><li>Valid driving license</li><li>Fluent in English and Arabic</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul><li><b>About The Client</b></li></ul><p>Kuwait-based organization operating within the building materials sector for several decades. The company specializes in the manufacturing and supply of drywall systems, ceiling solutions, cladding, and related construction materials, supporting a wide range of projects across Kuwait and the GCC. With in-house production capabilities and a focus on quality and customization, the organization works closely with contractors, consultants, and developers to deliver solutions aligned with project specifications and industry standards.</p><ul><li><b>About The Role</b></li></ul><p>To drive business development and project sales within the construction sector by identifying new opportunities, building relationships with key stakeholders, and promoting building material solutions across ongoing and upcoming projects. The role involves working closely with consultants, contractors, and developers, supporting specifications and technical proposals, conducting client presentations, and following up on project pipelines to ensure alignment with timelines, approvals, and overall sales targets.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li><b>About You</b></li></ul><p>An ideal candidate would have the following:</p><ul><li>Bachelor's degree in engineering or a related field</li><li>1–5 years of experience in technical/project sales within construction or building materials</li><li>Knowledge of drywall systems or similar building solutions is an advantage</li><li>Experience handling BOQs, specifications, and tender documents</li><li>Strong understanding of the Kuwait construction market with exposure to consultants and contractors</li><li>Ability to build relationships and manage client interactions across projects</li><li>Strong communication, presentation, and negotiation skills</li><li>Target-driven with the ability to generate pipeline and close deals</li><li>Proficient in Microsoft Office; AutoCAD is a plus</li><li>Must be currently based in Kuwait with a transferable visa and valid driving license</li><li>Fluent in English and Arabic</li></ul><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Please submit your CV in English and indicate your level of English proficiency.<br> Mindrift connects specialists with project-based AI opportunities for leading tech companies, focused on testing, evaluating, and improving AI systems.<br> Participation is project-based, not permanent employment.<br>What this opportunity involves: We're building a dataset to evaluate AI coding agents - how well a model handles real-world developer tasks.<br> You'll create challenging tasks and evaluation criteria within realistic simulated environments: Build realistic developer environments - a virtual company with codebase, infrastructure, and context (tickets, docs, conversations) that forms a believable development history Design tasks from intermediate states of these environments - craft the prompt, define what "solved" means, and ensure the task is solvable by an AI agent Write tests that verify agent solutions - accept all valid approaches and reject incorrect ones, neither too strict nor too lenient Iterate on tasks and tests based on QA feedback - review agent solutions, analyze failures, and refine until the evaluation is fair and robust What this is NOT: Not data labeling Not prompt engineering Not writing code from scratch - the agent writes most of the code; you guide and evaluate What we look for: 8+ years in software development Core stack: Python (FastAPI), JavaScript/TypeScript (React), Docker, Postgres, Kafka, Redis Experience writing tests (functional, integration) English proficiency - B2+ Why this is hard: Frontier models are already good at coding.<br> Creating a task that genuinely challenges the best models is non-trivial.<br> You need to deeply understand where models fail and what scenarios reveal the difference between a good and a bad solution.<br> Tasks have many valid solutions - writing tests that accept all correct solutions and reject incorrect ones is harder than it sounds.<br> How it works Apply → Pass qualification(s) → Join a project → Complete tasks → Get paidEffort estimate Tasks for this project are estimated to take 30 hours to complete, depending on complexity.<br> This is an estimate and not a schedule requirement; you choose when and how to work.<br> Tasks must be submitted by the deadline and meet the listed acceptance criteria to be accepted.<br> Compensation: Up to $200/hr equivalent , depending on level and pace.<br> Tasks are estimated at ~30 hours each; you set your own schedule.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Purpose:</b></p><p><b>To ensure high-quality standards and compliance with QMS and ISO requirements across industrial, civil, and mechanical construction projects</b></p><p><br></p><p><b>Key Responsibilities:</b></p><p> <b>QMS Implementation</b></p><p> •&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<b>Implement and maintain the Quality Management System (QMS) as per ISO 9001</b></p><p> •&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<b>Review and approve quality documents such as ITPs and procedures</b></p><p> <b>Audits &amp; Inspections</b></p><p> •&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<b>Perform ISO Lead Audits and regular site quality inspections</b></p><p> •&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<b>Verify material and workmanship compliance with project specifications</b></p><p> <b>Non-Conformance Management</b></p><p> •&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<b>Identify non-conformances and initiate corrective/preventive actions</b></p><p> •&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<b>Follow up and close out quality issues effectively</b></p><p> <b>Reporting &amp; Support</b></p><p> •&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<b>Monitor quality performance and prepare reports for management</b></p><p> •&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<b>Provide QA guidance and training to project teams</b></p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Qualifications &amp; Experience:</b></p><p><b><span></span></b></p><p><b>Bachelor Degree in Civil / Mechanical Engineering</b></p><p><b>Minimum 5 years of QA experience in industrial/civil/mechanical construction</b></p><p><b>Strong knowledge of QMS, ISO requirements, construction processes &amp; quality control</b></p><p><b>Lean Six Sigma Green Belt or Black Belt certification is preferred</b></p><p><br></p><p><br></p></div>

<p><br></p> <p> <b>The opportunity</b> </p> <p> </p> <p>Join a team that specializes in providing remote and on-site services for protection systems in transmission and distribution substations, ensuring solutions that are timely, cost-effective, and aligned with customer expectations. Our work adheres to industry-standard processes, safety protocols, and best practices delivering reliability and excellence every step of the way.</p> <p> </p> <p> <b>How you ll make an impact </b> </p> <ul> <li> <p> <span>Driving service sales and business development activities across assigned countries and market segments (e.g., Utilities, Power Generation, Oil &amp; Gas, EPCs, Industrial clients).</span> </p> </li> <li> <p> <span>Performing relay testing, commissioning, maintenance, and troubleshooting at client substations.<br>Possess knowledge of structured programming, communication techniques, and protocols for Hitachi Energy relays and familiarity with other relays manufacturers is preferable.</span> </p> </li> <li> <p> <span>Troubleshooting system protection problems and schemes effectively and understanding different protection and communication schemes and supervising the installation and commissioning of automation systems, ensuring full compliance with standards and best practices.</span> </p> </li> <li> <p> <span>Demonstrate expertise in testing, commissioning, maintenance, and troubleshooting of protection systems for all equipment in substations up to 400 kV voltage level.</span> </p> </li> <li> <p> <span>Experience in testing, commissioning, maintenance, and troubleshooting of protection systems for all equipment in power stations and refinery environments.</span> </p> </li> <li> <p> <span>Training site operators in the use of works and ensure site-specific manuals and documentation are available before handover and are highly familiar with interlocking schemes and gas tripping schemes across all voltage levels from 380 V to 400 kV.</span> </p> </li> <li> <p> <span>Consult with clients or their representatives to determine their needs and priorities.</span> </p> </li> <li> <p> <span>Provide written procedures for switching, energization, isolation methods for testing, commissioning, and maintenance work.</span> </p> </li> <li> <p> <span>Coordinate and oversee substation technicians and electricians, and serve as project manager, serve as the primary customer contact for specific projects, maintain a professional presentation when dealing with employees, clients, and suppliers and be well-versed in technical and safety precautions when working in live substations.</span> </p> </li> <li> <p> <span>Possess leadership skills and the ability to lead, supervise, and assign work to the protection team and unnecessary outages while working in Brownfield substations or on any type of energized equipment and experience in troubleshooting electrical parts for various types of switchgear. </span> </p> </li> <li> <p> <span>You will be responsible for ensuring compliance with applicable external and internal regulations, procedures, and guidelines.</span> </p> </li> <li> <p> <span>Living Hitachi Energy s core values safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.</span> </p> </li> </ul> <p> </p> <p> <b>Your background</b> </p> <ul> <li> <p> <span>A bachelor s degree in electrical engineering is preferred.</span> </p> </li> <li> <p> <span>Minimum 7 years of relevant experience is required.</span> </p> </li> <li> <p> <span>Strong communication and interpersonal skills.</span> </p> </li> <li> <p> <span>Ability to work independently and as part of a team.</span> </p> </li> <li> <p> <span>Proficient in using testing and diagnostic equipment.</span> </p> </li> <li> <p> <span>Ability to interpret and work from electrical drawings and schematics.</span> </p> </li> <li> <p> <span>Strong organizational and time management skills.</span> </p> </li> <li> <p> <span>Commitment to continuous improvement and learning.</span> </p> </li> <li> <p> <span>Proficiency in both spoken &amp; written English language is required.</span> </p> </li> </ul> <p> </p> <p> </p> <p><br></p>