وظائف مهندس انظمة مدمجة - محافظة العاصمة (الكويت) الكويت

<p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship. USAF equivalent position is Aircraft Mechanic Apprentice. Essential Responsibilities: Performs all daily launch/recovery duties in support of operational requirements. Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems. Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion. Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools. Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolate causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs. Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassemble and installs engine in aircraft. Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks. May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Must be able to work with little-to-no supervision. Performs all other duties as assigned as requested.</p><p><strong>Desired Candidate Profile</strong></p><p>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum. Minimum of one year of actual Aircraft Mechanic maintenance experience required. Must have basic knowledge of basic and complex mechanical maintenance and repair. Must possess basic knowledge of technical publications related to aircraft mechanical maintenance. Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems. Must be able to inspect and operate ground support and auxiliary equipment. Must achieve a passing grade in all required courses/certifications for continued employment, as needed. Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment. Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods. Must be able to speak, read, write, and understand English. Must submit updated SF-86 within 30 days of hire start date. Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance. Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment. Must have current/active State Issued Driver s License. Must be able to acquire and maintain a valid flight-line Government Driver s License. Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages. Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</p> <p>Associate degree in a relevant career field. Licensed by the FAA as an Airframe and Powerplant Mechanic. RPA Deployment Experience. Prior Experience as a Defense Contractor. Aircraft Mechanic Experience within the last 10 years. MQ-9 Experience as an Aircraft Mechanic. MQ-9 Aircraft Composite Repair / Replacement Experience.</p>

<p><h4>Job Description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. This position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential Responsibilities:</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneumatic/hydraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned or requested.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, including pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> </ul></p><p></p>

<p><h4>Description</h4> <p>The role in brief:<br> You'll be responsible to help support your employer's computer systems by installing, designing, and protecting them. This includes working on local area networks, network segments, Internet systems, and wide area networks.</p> <h4>Your responsibilities</h4> <ul> <li>Implementation and the high level of performance tuning and recovery procedures for mission critical enterprise systems.</li> <li>Serve as a technical expert in the area of system administration for complex operating systems. Investigate and analyze feasibility of system requirements and develop system specifications. Identify methods and solutions.</li> <li>Installation, configuration, and upgrading of servers and related hardware and software in a LAN, WAN, and stand-alone environment.</li> <li>Investigation, diagnostic testing, troubleshooting, and repair or resolution of system, hardware, software, and infrastructure issues.</li> </ul> <h4>Requirements</h4> <h4>Your qualification</h4> <ul> <li>Minimum 4 to 6 years of experience in a similar environment.</li> <li>Candidate should possess at least a Bachelor of Science or Bachelor of Computer Application.</li> <li>MCSE/MCSA certification and application-level certification related to Exchange and Storage will be an added advantage.</li> <li>Should be fluent in English; Arabic is an added advantage.</li> <li>Must have good communication skills, both verbal and oral, and be a self-starter.</li> </ul> <h4>Your proficiencies</h4> <ul> <li>Knowledge in network hardware infrastructure, diagnostic, and troubleshooting abilities.</li> <li>Fluent in English; Arabic would be an added advantage.</li> <li>Capacity to deal with complex problems with ability to demonstrate good judgment and decision making.</li> <li>Good communication skills.</li> <li>Able to work in a fast-paced environment, motivated, team player, team management, business and organization understanding.</li> <li>Organized, highly motivated, and goal-oriented.</li> <li>Adaptive to sudden schedule changes.</li> <li>Able to work well within teams.</li> </ul></p><p></p>

<p><h4>Description</h4> <p>The role in brief:<br> You'll be responsible to help support your employer's computer systems by installing, designing, and protecting them. This includes working on local area networks, network segments, Internet systems, and wide area networks.</p> <h4>Your responsibilities</h4> <ul> <li>Implementation and the high level of performance tuning and recovery procedures for mission critical enterprise systems.</li> <li>Serve as a technical expert in the area of system administration for complex operating systems. Investigate and analyze feasibility of system requirements and develop system specifications. Identify methods and solutions.</li> <li>Installation, configuration, and upgrading of servers and related hardware and software in a LAN, WAN, and stand-alone environment.</li> <li>Investigation, diagnostic testing, troubleshooting, and repair/resolution of system, hardware, software, and infrastructure.</li> </ul> <h4>Requirements</h4> <h4>Your qualification</h4> <ul> <li>Minimum 4 to 6 years of experience in a similar environment.</li> <li>Candidate should possess at least a Bachelor of Science or Bachelor of Computer Application.</li> <li>MCSE/MCSA certification and application-level certification related to Exchange and Storage will be an added advantage.</li> <li>Should be fluent in English; Arabic is an added advantage.</li> <li>Must have good communication skills, both verbal and oral, and be a self-starter.</li> </ul> <h4>Your proficiencies</h4> <ul> <li>Knowledge in network hardware infrastructure, diagnosis, and troubleshooting abilities.</li> <li>Fluent in English; Arabic would be an added advantage.</li> <li>Capacity to deal with complex problems with ability to demonstrate good judgment and decision making.</li> <li>Good communication skills.</li> <li>Able to work in a fast-paced environment, motivated and a team player with team management, business, and organization understanding.</li> <li>Organized, highly motivated, and goal-oriented.</li> <li>Adaptive to sudden schedule changes.</li> <li>Able to work well within teams.</li> </ul></p><p></p>

<p><h4>Faculty position at the American University of Kuwait (AUK)</h4> <p>The Department of Information Systems invites applications for rank assistant or associate professor; only applicants with Ph.D. in information systems will be considered for this position. Applications from recent graduates in the IS field are strongly encouraged. The successful candidate will teach a range of undergraduate courses. A commitment to enhancing undergraduate research opportunities for students is desirable. Faculty duties include teaching, research, student advising, and service to the college and university. The information systems program taught at AUK is CIS, not MIS. Knowledge of ABET program accreditation and curriculum development as well as assessment is highly desirable.</p> <p>The American University of Kuwait (AUK) is an independent, private, equal opportunity, and coeducational liberal arts institution of higher education. The educational, cultural, and administrative structure, methods, and standards of AUK are based on the American model of higher learning. The language of instruction is English.</p> <p>The American University of Kuwait is a liberal arts institution dedicated to teaching, learning, and scholarship. The university offers programs that provide students with the knowledge and skills necessary for lifelong learning and professional success. AUK enriches society by fostering an environment that encourages critical thinking, effective communication, personal growth, service, and leadership.</p> <p>AUK aspires to be a leading university recognized locally, regionally, and internationally for its institutional distinctiveness, academic excellence, and the accomplishments of its graduates.</p> <h4>Qualifications</h4> <p>Ph.D. in information systems is required. Knowledge of ABET program accreditation and curriculum development as well as assessment is highly desirable.</p> <h4>How to apply</h4> <p>Applications are accepted through the university's career portal.</p></p><p></p>

<p><h4>Picture yourself brightening someone’s day.</h4> <p>When you join our hotels team, that’s exactly what you’ll do every time you come to work! As a maintenance team leader, you’re not just overseeing daily operations of the physical building and systems maintenance and repairs – you’re spreading the light and warmth of hospitality by delivering memorable experiences that make the stay for every guest.</p> <h4>Here's what you'll do during a typical day:</h4> <ul> <li><strong>Supervise and develop the team:</strong> Train, schedule, and supervise maintenance team members, providing guidance and support to ensure high-quality work and performance.</li> <li><strong>Ensure facility safety and compliance:</strong> Support maintenance of the physical building, mechanical systems, electrical systems, HVAC, and life safety systems, ensuring compliance with local and national regulations.</li> <li><strong>Supervise maintenance operations:</strong> Assign and oversee daily maintenance tasks, ensuring thorough documentation of work in the property management system.</li> <li><strong>Oversee contractor work:</strong> Supervise external contractors and inspect completed work for quality and compliance.</li> <li><strong>Respond to service requests:</strong> Ensure that maintenance requests, guest concerns, and emergency situations are addressed promptly and efficiently.</li> <li><strong>Maintain fixtures and fittings:</strong> Conduct scheduled and ad hoc maintenance, including planned preventive maintenance (PPM) and service requests, to ensure hotel fixtures and fittings remain in safe condition.</li> </ul> <h4>What it takes to make the stay</h4> <p>At Hilton, our core values define what it takes to succeed here and guide the qualities we look for in every team member:</p> <ul> <li>A passion for spreading the light and warmth of hospitality.</li> <li>Acting with integrity and always doing the right thing.</li> <li>Inspiring others through leadership.</li> <li>A belief that teamwork drives the best outcomes.</li> <li>A sense of ownership and accountability.</li> <li>A focus on the now, bringing urgency and discipline to every moment, knowing it can make a lasting impact.</li> </ul></p><p></p>

<strong>Overview</strong> <br> <br> <p> <strong>**This position will be physically located in Kuwait**</strong> </p> <p> </p> <p>Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p> <p> </p> <p>The Inventory Control &amp; BII Specialist is responsible for maintaining 100% physical accountability of all Basic Issue Items (BII) and Components of End Item (COEI) across APS-5 equipment sets. This position ensures vehicle gear layouts match the exact property book and authorized technical manual requirements. The role also validates tactical digital communications systems, including SINCGARS/Harris radios, JCR, and BFT, and performs diagnostics using TMDE to isolate electronic node faults to the Line Replaceable Unit (LRU) level. The specialist ensures APS-5 equipment readiness, accuracy of component listings, and compliance with Army regulations and APS-5 SOPs.</p> <br> <strong>Responsibilities</strong> <br> <br> <p> <strong> <em> <span>This position description is subject to change at any time as needed to meet the requirements of the program or company.</span></em> </strong> </p> <ul> <li> <p>Perform full, partial, and cyclic inventories of BII, COEI, and AAL components for all APS-5 equipment. </p> </li> <li> <p>Responsible for 100% physical component count of all BII/COEI items.</p> </li> <li> <p>Ensure vehicle gear layouts match the exact authorized property book configuration and technical manual (TM) layout.</p> </li> <li> <p>Identify missing, damaged, incorrect, or substituted BII/COEI items and record all discrepancies.</p> </li> <li> <p>Maintain accurate inventory records within AWRDS, GCSS-Army, DPAS, and component tracking systems.</p> </li> <li> <p>Prepare shortage annexes, discrepancy worksheets, and reconciliation documentation.</p> </li> <li> <p>Ensure BII/COEI items are properly labeled, packaged, stored, and secured according to TMs and APS-5 SOPs. </p> </li> <li> <p>Support equipment issue, turn-in, and reset operations with complete BII/COEI validation. </p> </li> <li> <p>This position does not inspect engines, driveline systems, hydraulics, or vehicle mechanical readiness. </p> </li> <li> <p>Responsibilities focus solely on BII/COEI component accuracy, layout validation, and tactical digital systems.</p> </li> <li> <p>Validate vehicle-integrated tactical communications systems including SINCGARS/Harris radios, Joint Capabilities Release (JCR), and Blue Force Tracker (BFT).</p> </li> <li> <p>Perform functional checks on digital data buses, interface modules, and communication harnesses.</p> </li> <li> <p>Use TMDE to isolate faults in electronic nodes, data harnesses, and interface kits.</p> </li> <li> <p>Identify faults down to the Line Replaceable Unit (LRU) level.</p> </li> <li> <p>Ensure all tactical systems are installed/configured according to technical manuals and APS-5 configuration control standards.</p> </li> <li> <p>Maintain audit-ready logs of all diagnostics, validations, and corrective actions.</p> </li> <li> <p>Coordinate with Maintenance, Communication Shop, and Materiel Management for LRU replacements or system corrections.</p> </li> <li> <p>Maintain audit-ready documentation for inventories, tactical system checks, and reconciliation actions.</p> </li> <li> <p>Generate daily, weekly, and monthly inventory and tactical system status reports.</p> </li> <li> <p>Ensure compliance with APS-5 SOPs, Army regulations, and government contractual requirements.</p> </li> <li> <p>This job description is not intended to be all-inclusive. Management may assign additional duties to support APS-5 mission requirements.</p> <p> </p> </li> </ul> <br> <strong>Qualifications</strong> <br> <br> <ul> <li> <strong>Minimum Qualifications: Education/Certifications</strong>: One year related experience may be substituted for one year of education, if degree is required.<br> <ul> <li>High school diploma or equivalent; associate degree preferred.</li> <li>Must be able to obtain a Host Country Driver's License</li> <li>Must be CAC eligible and/or the ability to obtain a CAC</li> </ul> </li> <li> <strong>Experience:</strong> <br> <ul> <li>APS-5 experience in inventory, BII/COEI management, or Army supply operations.</li> <li>Familiarity with SINCGARS/Harris/JCR/BFT systems and basic TMDE diagnostics.</li> <li>Proficiency with AWRDS, GCSS-Army, DPAS, and technical manual interpretation.</li> <li>Environmental Regulations, including Federal OSHA and EPA regulations.</li> <li>Military background and training beneficial.</li> </ul> </li> <li> <strong>Skills:</strong> <br> <ul> <li>Ability to instruct small and medium groups of people, Competent in computer operations to include Microsoft Office; Outlook, Word, Excel, and PowerPoint.</li> <li>Must have a strong ability to work independently.</li> <li>Strong analytical skills, attention to detail, and organizational abilities.</li> </ul> </li> <li> <strong>Working Conditions:</strong> <br> <ul> <li>Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months).</li> <li>Includes some industrial production environment conditions as well.</li> </ul> </li> <li> <strong>Physical Requirements:</strong> <br> <ul> <li>Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.</li> <li>Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. Must comply with all Fire and Safety Regulations and post policies.</li> </ul> </li> </ul> <p> </p>

<p>Perform installation, commissioning, maintenance, and repair activities for GIS equipment, including circuit breakers, disconnectors, and earthing switches. Conduct routine inspections, diagnostic testing, and preventive maintenance on GIS systems to identify and address potential issues. Troubleshoot complex GIS malfunctions, determine root causes, and implement effective corrective actions. Develop and execute maintenance procedures and schedules in accordance with manufacturer specifications and industry best practices. Share technical knowledge and provide guidance to technicians and engineers on GIS operation and maintenance. Collaborate with engineering and project teams on GIS design reviews, upgrades, retrofits, and modifications. Maintain accurate records of maintenance activities, repairs, testing results, and equipment performance data. Ensure compliance with all applicable health, safety, environmental, quality, and regulatory requirements during GIS operations and maintenance activities. Prepare technical reports, service documentation, and recommendations related to GIS performance and reliability. Support emergency response activities and provide timely assistance during critical equipment failures, as required. You will be responsible for ensuring compliance with applicable external and internal regulations, procedures, and guidelines. Living Hitachi Energy s core values safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in Electrical Engineering, Power Systems Engineering, or a related field. Minimum of 7 years of experience working with Gas Insulated Switchgear (GIS) systems. Strong knowledge of GIS components, operating principles, and common failure modes. Proven experience in GIS installation, commissioning, maintenance, and troubleshooting activities. Familiarity with applicable international and national electrical safety standards and regulations. Ability to read and interpret electrical schematics, single-line diagrams, and technical drawings. Strong analytical and problem-solving skills, with the ability to diagnose and resolve complex electrical issues. Excellent communication and interpersonal skills, with the ability to collaborate effectively with cross-functional teams and customers. Ability to work independently, prioritize responsibilities, and manage multiple tasks simultaneously. Valid driver's license and willingness to travel to project sites as required. Experience with Hitachi Energy GIS products and systems is considered a strong advantage</p>

<p><h4>Job description</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers’ manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs.</p> <p>Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns, and drills.</p> <p>Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories.</p> <p>Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship.</p> <p>USAF equivalent position is Aircraft Mechanic Apprentice.</p> <h4>Essential responsibilities</h4> <ul> <li>Performs all daily launch/recovery duties in support of operational requirements.</li> <li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical/electronic systems, and problems.</li> <li>Supports aircraft utilization and maintenance activity schedules. Maintains accurate parts inventory during all maintenance activities. Performs maintenance and repair tasks and ensures their successful completion.</li> <li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability. Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li> <li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc. Diagnoses malfunctions, isolates causes and corrects breaks. Tests engine operations, using testing equipment to locate source(s) of malfunction. Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li> <li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices. Disassembles and inspects parts for wear, warping, or other defects. Repairs and replaces defective engine components and reassembles and installs engine in aircraft.</li> <li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories. Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li> <li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li> <li>Must be able to work with little-to-no supervision.</li> <li>Performs all other duties as assigned as requested.</li> </ul> <h4>Minimum requirements</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft mechanic maintenance experience required.</li> <li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li> <li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li> <li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>Licensed by the FAA as an airframe and powerplant mechanic.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Aircraft mechanic experience within the last 10 years.</li> <li>MQ-9 experience as an aircraft mechanic.</li> <li>MQ-9 aircraft composite repair/replacement experience.</li> <li>Highly desired to have a U.S. passport valid for an additional two years with at least two facing pairs (four total) of blank visa pages.</li> </ul> <h4>Compensation details</h4> <p>34.17</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<p>Facilities &amp; Building Maintenance Management Hotel Experience Mandatory HVAC, MEP systems Electrical, Plumbing Fire safety systems BMS Preventive maintenance Salary: KWD 350 to 450 Free Accom Work VISA&nbsp;</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>Facilities &amp; Building Maintenance Management Hotel Experience Mandatory HVAC, MEP systems Electrical, Plumbing Fire safety systems BMS Preventive maintenance Salary: KWD 350 to 450 Free Accom Work VISA Online Interview WhatsApp: +9PHONE_NUMBER</p><p><strong>Desired Candidate Profile</strong></p><p>Facilities &amp; Property Maintenance Manager experience in Hotel Industry</p>

<p><h4>Description</h4> <p>Apt Resources is seeking a skilled borewell technician to join our client's agriculture farm in Abu Dhabi, UAE. In this role, you will be responsible for the installation, maintenance, and repair of borewell systems that supply water for irrigation and farm operations. Your expertise will ensure that the farm has a reliable water source, vital for crop growth and sustainability.</p> <p>The ideal candidate will possess a strong understanding of borewell operations, troubleshooting skills, and the ability to work independently. You will collaborate closely with the farm management team to ensure efficient water management and support agricultural productivity.</p> <h4>Responsibilities</h4> <ul> <li>Install and maintain borewell systems, ensuring efficient operation and water supply.</li> <li>Conduct regular inspections and troubleshooting of borewell installations.</li> <li>Repair any malfunctions and perform routine maintenance on borewell equipment.</li> <li>Ensure compliance with agricultural water management policies and safety regulations.</li> <li>Collaborate with farm staff to optimize water usage effectively.</li> <li>Keep accurate records of maintenance activities and repairs performed.</li> </ul> <h4>Requirements</h4> <ul> <li>Proven experience as a borewell technician or similar role in agriculture.</li> <li>Strong knowledge of borewell systems, installation, and maintenance.</li> <li>Ability to troubleshoot technical issues and perform repairs.</li> <li>Excellent problem-solving skills and attention to detail.</li> <li>Ability to work independently and as part of a team.</li> <li>Good physical stamina and the capability to work in outdoor conditions.</li> </ul> <h4>Benefits</h4> <p><strong>Salary:</strong> AED 2,500 - AED 3,000 plus accommodation and food provided.</p></p><p></p>

<p><h4>Job summary</h4> <p>Employee will be part of the deployment pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules.</p> <p>Employee will assemble, disassemble, renovate, transport, load, deactivate, modify, destroy, and handle munitions including missiles, precision, and gravity bombs. Work on the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components. Perform maintenance modifications, destruction, and demilitarization of ammunition and explosive components. Operate computer hardware and software utilities and manual records in order to perform stock control and accounting procedures. Inspect bomb release systems and missile launchers to determine need for repair or destruction in support of Reaper Series RPA maintenance.</p> <p>Additionally, employee may conduct inspection, maintenance, and storage of munitions and support equipment. Support weapons loading and armament systems and related matters. Support quality assurance, compliance, continuity, and standardization of munitions programs. Attend weapons safety course, load certification and related activities. Provide technical inputs to managers in matters of weapons management, inventory, and maintenance, loading, and armament systems. Assist with availability and serviceability of munitions to support emerging customer requirements.</p> <p>USAF equivalent position is Munitions/Weapons Technician Apprentice.</p> <h4>Essential responsibilities:</h4> <ul> <li>Perform basic work in the installation, configuration changes, modification, repair and adjustment of aircraft armament systems and components.</li> <li>Perform basic maintenance modification, destruction and demilitarization on ammunition and explosive components.</li> <li>Operate basic computer hardware and software/utilities and manual records in order to perform stock control and accounting procedures.</li> <li>Inspect bomb release systems and missile launchers to determine need for repair or destruction.</li> <li>Assist in management of all inspection, maintenance, and storage of munitions and support equipment.</li> <li>Support quality assurance, compliance, continuity, and standardization of munitions programs.</li> <li>Provide technical inputs to management in matters of weapons management, inventory, maintenance, loading, and armament systems.</li> <li>Maintain weapons certification and currency.</li> <li>Assist with availability and serviceability of munitions to support and meet customer requirements.</li> <li>Perform all other duties as assigned or requested.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>Must have high school diploma or have completed relevant military and/or vocational technical school curriculum.</li> <li>Minimum of one year of actual aircraft munitions/weapons maintenance experience required.</li> <li>Completed USAF Munitions/Weapons Tech School or DoD equivalent.</li> <li>Must possess basic knowledge of technical publications related to aircraft maintenance.</li> <li>Must be able to perform increment monitor duties to include but not limited to equipment/cargo preparation, documentation, pallet build-up, and hazardous cargo.</li> <li>Must be able to inspect and operate ground support and auxiliary equipment.</li> <li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li> <li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li> <li>Must be able to deploy to forward locations (other countries) as directed by the government.</li> <li>Must be able to lift, carry and/or wear military issued equipment in excess of 50 pounds for extended periods.</li> <li>Must be able to speak, read, write, and understand English.</li> <li>Must have had an active secret US government clearance within the last 12 months. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must be able to maintain required DoD security clearance commensurate with the assigned duties during employment.</li> <li>Must submit updated SF-86 within 30 days of hire start date.</li> <li>Must have current/active state issued driver’s license.</li> <li>Must be able to acquire and maintain a valid flight-line government driver’s license.</li> <li>Must have valid U.S. passport with a minimum of two years remaining with at least two facing pairs (four total) of blank visa pages.</li> <li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Associate degree in a relevant career field.</li> <li>RPA deployment experience.</li> <li>Prior experience as a defense contractor.</li> <li>Munitions/weapons experience within the last 10 years.</li> </ul> <h4>Compensation details:</h4> <p>34.62</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview:</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Original posting:</h4> <p>06/02/2026 - 06/06/2026</p> <p>Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>