وظائف مهندسين ميكانيكا - محافظة العاصمة (الكويت) الكويت

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><ul><li><p>Prepare and develop FEED packages, including mechanical design calculations, datasheets, and technical specifications.</p></li><li><p>Review and verify project drawings, datasheets, and technical documents for accuracy, completeness, and compliance with project requirements and standards.</p></li><li><p>Perform mechanical design calculations, equipment selection, and material specification in line with project requirements.</p></li><li><p>Collaborate with multi-disciplinary teams, including piping, civil, electrical, and instrumentation engineers, to ensure integrated project delivery.</p></li><li><p>Ensure designs meet client requirements, project timelines, and international standards.</p></li><li><p>Provide technical support during project execution, including design modifications, clarifications, and troubleshooting.</p></li><li><p>Ensure all engineering deliverables adhere to HSE standards, company policies, and applicable codes.</p></li><li><p>Support procurement activities by providing technical input for mechanical equipment and material selection and BOM.</p></li><li><p>Assist in developing project schedules, cost estimates, and technical reports.</p></li><li><p>Proven ability to review project drawings, technical documents, audits, and project meetings.</p></li></ul><p>Demonstrate excellent analytical, communication, and coordination skills to ensure effective collaboration and project delivery.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s degree in Mechanical engineering or a related field.</p></li><li><p>Proficiency in engineering software/tools (e.g., AutoCAD, PDMS, Smart Plant, CAESAR II, PV Elite or similar).</p></li><li><p>Strong understanding of mechanical systems, codes, and standards (ASME, API, ISO, etc.).</p></li><li><p>Minimum 10years of experience in mechanical design within the Oil &amp; Gas sector.</p></li><li><p>Hands-on experience in FEED package preparation.</p></li><li><p>Strong capability in reviewing and interpreting project drawings and technical documentation.</p></li><li><p>Familiarity with project management tools and documentation control systems.</p></li><li><p>Strong problem-solving ability and attention to detail.</p></li><li><p>Kuwait based / Transferable Visa</p></li></ul><p><br></p><p></p></section>

<p>The Mechanical Metrology Engineer is the resident expert in his field and, in conjunction with the Kuwait Senior Engineer, provides engineering/consultant services to the GOK. Conducts research and studies new equipment to ensure that the latest developments in technique and equipment are included in metrology planning for future acquisition. Assists in the development and implementation of a Metrology QA Program as required. Assists in obtaining and maintaining laboratory QA accreditation. Assesses requirements and develops new measurement techniques and approaches related to mechanical, electro- mechanical, optical, electro-optical, chemical, and electro-chemical calibration methodology. Also performs analysis and evaluation of equipment test and performance requirements, and prescribes calibration approaches, test equipment and servicing requirements necessary to assure measurement traceability. Directs, conducts and evaluates the development of calibration procedures for assigned equipment categories. Conducts liaison and coordinates with technical societies and engineering facilities of other countries to remain current with the state-of-the-art and new measurement techniques. Responsible for laboratory facility and related environmental control development, operation and maintenance. Coordinates with civilian contractor and military civil engineering organizations on all projects affecting metrology facilities to ensure timely completion. Acts as consultant to GOK military and ministries on matters pertaining to metrology facilities and environmental requirements. Conducts liaison and coordination with technical societies and engineering facilities of other countries to remain current with state-of-the-art for metrology facilities and environmental control systems. Works with the Electrical Engineer on all matters associated with Power Production and Facilities. It is anticipated that Engineers will be assigned as these job descriptions state and other related specific tasking details and priorities will be determined and set by the Commander, KAFMB and communicated to the Contractor lead.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>An Associate's degree in mechanical engineering, physics or a related technical field from an accredited college or university and twelve (12) years of work experience operating, maintaining, troubleshooting, repairing, calibrating electronic precision measurement equipment and calibration laboratory reference standards. Includes qualification requirements D and E.</li><li>OR; Completion of a U.S. military precision measurement and calibration school and twelve (12) years of work experience in the metrology and calibration field.</li><li>Completion of a precision measurement and calibration school at an accredited school, or within a specialized calibration firm, and twelve (12) years of experience operating, maintaining, troubleshooting, repairing and calibrating physical/dimensional precision measurement equipment and calibration laboratory reference standards.</li><li>I Five (5) years of experience in technical oversight and training responsibilities of calibration and repair technicians with three (3) years within the last five (5) years.</li><li>Experience in researching requirements and maintaining calibration laboratory facility and related environmental control systems.</li><li>Must have an Active Secret US Government Clearance.</li><li>US Citizenship is required to obtain a Secret Clearance.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Role &amp; responsibilities</b> 1. Design Review and Enhancement: Evaluate and enhance mechanical designs to ensure compliance with industry standards and project requirements. Provide technical expertise in HVAC equipment design and selection, offering optimization and efficiency improvement suggestions. 2. Systems Knowledge: Possess in-depth knowledge of HVAC systems, fire-fighting pump selection, and understanding of LPG, water, and drainage systems. Demonstrate proficiency in selecting and integrating HVAC equipment into project designs. 3. Statutory Compliance: Stay abreast of and ensure compliance with local regulations and statutory requirements related to HVAC, LPG, water, and drainage systems. Advise project teams on regulatory considerations and necessary adjustments to maintain compliance. 5. Maintenance Expertise: Exhibit knowledge and experience in maintaining HVAC equipment, providing valuable insights for optimal performance and longevity. 6. Consultant and Contractor Collaboration: Have a comprehensive background working in consultancy, contributing to developing and refining project designs. Collaborate effectively with contractors, offering technical support and guidance during project implementation. 7 . Site Evaluation: Oversee site evaluations, providing instructions to on-site engineers and addressing any issues. Ensure that project specifications are met during the evaluation/supervision phase.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>4. Experience: Bring a wealth of experience exceeding 5 years in mechanical engineering, focusing on HVAC systems and related disciplines.</p><p>Bachelors degree in mechanical engineering. work experience in consultancy and contracting firms.</p><p></p></section>

<p>The Mechanical Metrology Engineer is the resident expert in his field and, in conjunction with the Kuwait Senior Engineer, provides engineering/consultant services to the GOK. Conducts research and studies new equipment to ensure that the latest developments in technique and equipment are included in metrology planning for future acquisition. Assists in the development and implementation of a Metrology QA Program as required. Assists in obtaining and maintaining laboratory QA accreditation. Assesses requirements and develops new measurement techniques and approaches related to mechanical, electro- mechanical, optical, electro-optical, chemical, and electro-chemical calibration methodology. Also performs analysis and evaluation of equipment test and performance requirements, and prescribes calibration approaches, test equipment and servicing requirements necessary to assure measurement traceability. Directs, conducts and evaluates the development of calibration procedures for assigned equipment categories. Conducts liaison and coordinates with technical societies and engineering facilities of other countries to remain current with the state-of-the-art and new measurement techniques. Responsible for laboratory facility and related environmental control development, operation and maintenance. Coordinates with civilian contractor and military civil engineering organizations on all projects affecting metrology facilities to ensure timely completion. Acts as consultant to GOK military and ministries on matters pertaining to metrology facilities and environmental requirements. Conducts liaison and coordination with technical societies and engineering facilities of other countries to remain current with state-of-the-art for metrology facilities and environmental control systems. Works with the Electrical Engineer on all matters associated with Power Production and Facilities. It is anticipated that Engineers will be assigned as these job descriptions state and other related specific tasking details and priorities will be determined and set by the Commander, KAFMB and communicated to the Contractor lead.</p><p><strong>Desired Candidate Profile</strong></p><p>An Associate s degree in mechanical engineering, physics or a related technical field from an accredited college or university and twelve (12) years of work experience operating, maintaining, troubleshooting, repairing, calibrating electronic precision measurement equipment and calibration laboratory reference standards. Includes qualification requirements D and E. OR; Completion of a U.S. military precision measurement and calibration school and twelve (12) years of work experience in the metrology and calibration field. Completion of a precision measurement and calibration school at an accredited school, or within a specialized calibration firm, and twelve (12) years of experience operating, maintaining, troubleshooting, repairing and calibrating physical/dimensional precision measurement equipment and calibration laboratory reference standards. I Five (5) years of experience in technical oversight and training responsibilities of calibration and repair technicians with three (3) years within the last five (5) years. Experience in researching requirements and maintaining calibration laboratory facility and related environmental control systems. Must have an Active Secret US Government Clearance. US Citizenship is required to obtain a Secret Clearance.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Employee will be part of the Deployment Pool and will be required to support deployments to various CONUS/OCONUS locations, as required. This position will require the member to be flexible in the support of assigned deployment/work schedules. Member will perform and inspect organizational and intermediate level maintenance and modifications on RPA systems and support equipment, as required. Lastly, this position requires an individual that can apply basic technical knowledge to solve complex problems by interpreting Air Force technical orders, manufacturers manuals/instructions or similar documents through the usage of test equipment/instruments to affect repairs. Member will inspect, service, repair, and overhaul aircraft, aircraft engines, and other critical components to ensure airworthiness. Repair, replace, and rebuild aircraft structures, landing gear, power plants/trains, fuel systems, and functional components using hand tools, power tools, welding equipment, rivet guns and drills. Inspect and repair power plant malfunctions, including cracked components, oil leaks, etc.; diagnose malfunctions, isolate causes and correct breaks; test engine operations, use test equipment to locate source of malfunction(s). Replace/repair damaged components and remove engine/major components from aircraft, using hoist or other lifting devices; disassemble and inspect parts for wear, warping, or other defects; repair/replace defective engine components and reassemble and install engines in aircraft; adjust, repair, or replace instruments, ADP flight controls, electrical/electronics, fuel/oil systems and associated aircraft accessories. Perform aircraft services to include engine flushing/cleaning, parts lubrication, and required maintenance checks. May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies. Recommend revisions to maintenance procedures to improve efficiency and ensure quality workmanship. USAF equivalent position is Aircraft Mechanic Apprentice.</p><p>Essential Responsibilities:</p><ul><li>Performs all daily launch/recovery duties in support of operational requirements.</li><li>Applies logic and good judgment, understands basic technical order diagrams and procedures, and uses test equipment for analysis of airframes, engines, flight controls, pneudraulic, fuel, electrical / electronic systems, and problems.</li><li>Supports aircraft utilization and maintenance activity schedules.</li><li>Maintains accurate parts inventory during all maintenance activities.</li><li>Performs maintenance and repair tasks and ensures their successful completion.</li><li>Services, repairs, and overhauls aircraft equipment, engines, and sub-systems to ensure serviceability.</li><li>Repairs, replaces, and rebuilds aircraft structures, landing gear, power plants, fuel systems (including tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, drills, and other tools.</li><li>Inspects and repairs power plant (engine) malfunctions, including cracked components, oil leaks, etc.</li><li>Diagnoses malfunctions, isolate causes and corrects breaks.</li><li>Tests engine operations, using testing equipment to locate source(s) of malfunction.</li><li>Replaces and repairs damaged components, uses hand tools, gauges, and test equipment to complete repairs.</li><li>Removes engine and major components from aircraft equipment, using hoist or other lifting devices.</li><li>Disassembles and inspects parts for wear, warping, or other defects.</li><li>Repairs and replaces defective engine components and reassemble and installs engine in aircraft.</li><li>Adjusts, repairs, or replaces instruments, flight control, electrical/electronic, fuel/oil systems and aircraft accessories.</li><li>Performs aircraft and vehicle services, including engine wash/cleaning, parts lubrication, and maintenance checks.</li><li>May service engines and airframe components at flight line operations making repairs, short of overhaul, required to ensure aircraft safe operating conditions.</li><li>May specialize in repair and modification of engines, structural components, precision repair, functional spare parts, and assemblies.</li><li>Must be able to work with little-to-no supervision.</li><li>Performs all other duties as assigned as requested.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must have High school diploma or have completed relevant military and/or vocational technical school curriculum.</li><li>Minimum of one year of actual Aircraft Mechanic maintenance experience required.</li><li>Must have basic knowledge of basic and complex mechanical maintenance and repair.</li><li>Must possess basic knowledge of technical publications related to aircraft mechanical maintenance.</li><li>Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a basic understanding of applicable systems.</li><li>Must be able to inspect and operate ground support and auxiliary equipment.</li><li>Must achieve a passing grade in all required courses/certifications for continued employment, as needed.</li><li>Employee must meet all OCONUS deployment criteria, to include pre-deployment medical screening, as a condition of employment.</li><li>Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods.</li><li>Must be able to speak, read, write, and understand English.</li><li>Must submit updated SF-86 within 30 days of hire start date.</li><li>Must have had an Active Secret US Government Clearance within the last 12 months. Note: US citizenship is required to obtain a Secret clearance.</li><li>Must have current/active State Issued Driver s License.</li><li>Must be able to acquire and maintain a valid flight-line Government Driver s License.</li><li>Must have valid U.S. Passport with a minimum of two years remaining with at least two facing pairs (four total) of blank Visa pages.</li><li>Must be fully COVID-19 vaccinated with booster. Accommodations may be available under limited circumstances.</li></ul><p>Preferred Qualifications</p><ul><li>Associate degree in a relevant career field.</li><li>Licensed by the FAA as an Airframe and Powerplant Mechanic.</li><li>RPA Deployment Experience.</li><li>Prior Experience as a Defense Contractor.</li><li>Aircraft Mechanic Experience within the last 10 years.</li><li>MQ-9 Experience as an Aircraft Mechanic.</li><li>MQ-9 Aircraft Composite Repair / Replacement Experience.</li><li>Highly desired to have a U.S. Passport valid for an additional two years with at least two facing pairs (four total) of blank Visa pages.</li></ul><p></p></section>

<p><h4>Project</h4> <p>KBR’s Sustainable Technology Solutions (STS) group is looking for a Lead HSE Engineer to support HSE function on PMC Project with Kuwait Oil Company in Kuwait.</p> <h4>Summary section</h4> <p>The Lead HSE engineer will coordinate implementation of the KOC PMC Safety policies, HSE Management System and project specific HSE Management Plans as they apply to the project.<br> He will ensure that the site complies with the relevant HSE legislation and KOC HSE requirements.<br> He will develop and implement the project HSE MS.<br> He will develop and maintain statistical data for the project and prepare reports as required for the KBR KOC PMC HSEQ Manager.</p> <h4>Mandatory qualifications including required education, experience, & skills:</h4> <ul> <li>Bachelor degree in engineering</li> <li>Minimum 12 years total post-graduation experience</li> <li>Minimum 8 years oil & gas post-graduation experience</li> <li>Minimum 5 years’ experience in a Lead HSE Engineer role</li> <li>Practical experience of design, construction, commissioning and maintenance aspects of oil/gas installations</li> <li>Practical experience with HSE management systems, reporting and audit procedures</li> <li>Excellent written coordination and verbal communication skills</li> <li>Ability to develop, update and maintain in-house procedures</li> <li>Must be conversant with local and international safety standards and norms</li> <li>Must possess two or more HSE certifications (certified courses) in General Industrial Safety, Construction Safety, Environmental Management, Industrial Hygiene, ISO 14001 / OHSAS 18001 Lead Auditor, NEBOSH, ICertOSH, ASSE Certificate in Global Safety Management or equivalent courses</li> </ul> <h4>Responsibilities:</h4> <ul> <li>Monitor the EPC contractor HSE Management System and provide advice and assistance to EPC HSE managers so they comply in a consistent way to reduce the risk to the project employees and the environment</li> <li>Ensure the EPC contractors develop, implement and maintain a specific project Risk Management Plan</li> <li>Ensure EPC contractor subcontractor selection (ITB) processes are developed and implemented on a timely basis in accordance with KOC expectations</li> <li>Provide advice and guidance to the EPC contractor management team on HSE issues through the interpretation of KOC policies and statutory requirements</li> <li>Ensure EPC contractors establish and maintain statistical data concerning all matters of health and safety, training programs with which to provide a basis for development of further health and safety activities, to highlight trends for future action</li> <li>Monitor compliance with all Kuwait legislative requirements including the dissemination of information to PMC and EPC managers and employees regarding amendments/additions to requirements as they come into effect</li> <li>Review EPC contractor Safety Management System and advise of required changes</li> <li>Develop and maintain professional relationships with KOC, regulatory bodies and EPC contractors to foster the professional image of KBR</li> <li>Visit the project site on a regular basis to ensure interest and awareness of HSE is maintained, conduct regular safety talks and safety training sessions relative to the nature of activities being undertaken</li> </ul> <p>Other key activities shall include but not be limited to the following:</p> <ul> <li>Pro-actively visit site and with the EPC contractor implement safety measures - promote/ensure safe work practices</li> <li>Ensure quality safety observation program is implemented and maintained on each site/project and ensure follow up on findings</li> <li>Assist EPC contractor construction management personnel in identifying hazards and in planning and organizing the work such that a safe working environment is maintained</li> <li>Assist EPC sub-contractor Safety advisors and site management in the development and revision of specific site safety programmes</li> <li>Maintain a HS&E audit and assessment program for the location</li> <li>Carry out regular inspections of the work areas with the respective EPC contractor line manager and/or HSE representative and prepare reports</li> <li>Disseminate safety information throughout the workplace via bulletin boards, posters, newsletters etc.</li> <li>Assist EPC contractor line management and/or construction supervisors in accident investigation process and report accordingly</li> <li>Develop and implement safety initiatives to continually improve, achieve and maintain stated safety performance and objectives</li> <li>Ensure HSE safety inductions are undertaken in accordance with the EPC contractor SMS requirements for all new employees of the company and its subcontractors</li> <li>Monitor the availability and use of safety apparel and equipment</li> <li>Provide advice to the EPC subcontractor supervision on the development of project specific procedures and Job Safety Analysis (JSA) training</li> <li>Advise subcontractor supervisory staff and employees in the implementation of strategies to identify and control potential hazards and in the use of the hierarchy of controls</li> <li>Ensure all lines of communication on HSE matters remain open and effective between all parties particularly KOC, KBR, EPC contractors and their sub-contractors</li> </ul> <p>Decarbonization – Energy transition – Sustainability<br> Belong. Connect. Grow. with KBR!</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Job description</b></p><p>Urgent requirement for Kuwait</p><p>Mechanical Engineer ( Heavy Equipment Industry )</p><p><b>Role: Mechanical Engineer</b></p><p>Industry Type: Industrial Equipment / Machinery (Construction Equipment)</p><p>Department: Construction &amp; Site Engineering</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Construction Engineering</p><p><b>Education</b></p><p>UG: B.Tech / B.E. in Any Specialization</p></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Estimation Engineer for Oil &amp; Gas - Maintenance, construction and shutdown projects - Mechanical, Electrical and Instrumentation etc. Knowledge in softwares and reading drawings etc...</p> <p><br></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Required Candidate profile</p><p>5 - 10 Years experience in Estimation. Must have working experience as Estimation Engineer with leading contracting companies in Oil &amp; Gas, Refinery etc</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Key Responsibilities:</strong></p><ul><li>Review and check transformer tender drawings based on electrical inputs</li><li>Assist electrical design team in preparing BOQ, weight estimation, etc.</li><li>Prepare and review customer drawings/layouts post work order</li><li>Perform load calculations and mechanical design of transformers</li><li>Conduct stress analysis (pressure &amp; vacuum tests)</li><li>Work on design and drafting using Autodesk 2D &amp; 3D tools</li><li>Use software like Autodesk Inventor for modeling and analysis</li><li>Handle transformer designs up to 132kV class / 50MVA</li></ul><p><strong>Skills Required:</strong></p><ul><li>Strong knowledge of transformer mechanical design software</li><li>Hands-on experience with AutoCAD &amp; Autodesk Inventor</li><li>Understanding of international design standards</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Kindly note the below mentioned details for your reference.</p><p>Position: Mechanical Design Engineer (Transformers)</p><p><strong>Location :</strong> Kuwait</p><p><strong>Vacancies: </strong>2</p><p><strong>Maximum Age:</strong> 45 Years</p><p><strong>Qualification:</strong></p><ul><li>B.E / B.Tech in Mechanical Engineering</li></ul><p><strong>Experience:</strong></p><ul><li>Minimum 510 years of experience in:</li><li>Oil-filled Power Transformers</li><li>Dry Type / Cast Resin Distribution Transformers</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>COMBINED GENERAL URGENT REQUIREMENT KUWAIT LONG-TERM OIL &amp; GAS PROJECT</p><p>Job Category: Oil &amp; Gas Construction / EPC Project</p><p>INTERVIEW MODE: ONLINE INTERVIEW</p><p><br></p><p>EXPERIENCE REQUIRED</p><p>Minimum: 8 Years</p><p>Maximum: 10 Years</p><p>Key Highlights for Poster:</p><ul><li>510+ Years Oil &amp; Gas Experience Required</li><li>Kuwait Society of Engineering Approval (Engineers)</li><li>Oil Company Approval Preferred</li><li>CSWIP / NACE / HSE Certifications Required</li><li>Accommodation Provided (Selected Categories)</li></ul><p>Interview Mode: Online Interview</p><p>Education Section:</p><p>QA/QC Engineer (Mechanical)</p><ul><li>Ensure project quality standards and specifications are followed</li><li>Review drawings, procedures, ITPs, and inspection documents</li><li>Conduct inspections for mechanical works, piping, equipment installation</li><li>Prepare QA/QC reports and coordinate with client inspectors</li></ul><p>Civil Site Engineer</p><ul><li>Supervise civil construction activities at site</li><li>Monitor concrete works, foundations, structures, and site execution</li><li>Ensure work follows drawings, specifications, and safety standards</li><li>Coordinate with contractors and project teams</li></ul><p>Mechanical Site Engineer</p><ul><li>Supervise mechanical installation activities</li><li>Monitor piping, equipment erection, and mechanical works</li><li>Ensure compliance with engineering standards and project requirements</li><li>Coordinate inspections and site progress</li></ul><p>Electrical Site Engineer</p><ul><li>Supervise electrical installation works</li><li>Ensure proper execution of electrical systems and equipment</li><li>Review drawings and conduct inspections</li><li>Coordinate testing and commissioning activities</li></ul><p>HSE / Safety Engineer</p><ul><li>Implement HSE policies and safety procedures</li><li>Conduct safety inspections, audits, and toolbox talks</li><li>Monitor site safety compliance</li><li>Prepare safety reports and incident investigation.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor of Engineering (B.E)</p><p></p></section>

<p>Urgent Hiring – Project Engineer | Kuwait Engineers India Limited (EIL) is hiring experienced professionals for a client project based in Kuwait. • Location: Client Site, Kuwait Key Responsibilities: • Coordinate engineering and construction activities. • Monitor project progress, schedules, and deliverables. • Liaise with clients, contractors, and multidisciplinary teams. • Ensure compliance with project specifications, quality, HSE, and client requirements. • Prepare and review technical documentation and project reports. • Support project planning, execution, and close-out activities. Preferred Skills: • Strong project coordination and communication skills. • Knowledge of engineering standards and project management practices. • Ability to work in a multidisciplinary team environment. • Proficiency in MS Office and project documentation. Employment Type: • Client Site Deployment (Kuwait)</p><p> • Minimum 10 years of relevant experience • Educational background in Electrical, Instrumentation, Mechanical, Civil, or Chemical Engineering Experience: • Minimum 10 years of relevant experience in engineering projects. • Experience in project execution, coordination, construction, or maintenance is preferred. Educational Qualification: • Bachelor's Degree in Electrical, Instrumentation, Mechanical, Civil, or Chemical Engineering. Preferred Industry: • Oil & Gas / Petrochemical / Refinery / EPC / Industrial Projects</p>

<p>Urgent Hiring – Project Engineer | Kuwait Engineers India Limited (EIL) is hiring experienced professionals for a client project based in Kuwait. • Location: Client Site, Kuwait Key Responsibilities: • Coordinate engineering and construction activities. • Monitor project progress, schedules, and deliverables. • Liaise with clients, contractors, and multidisciplinary teams. • Ensure compliance with project specifications, quality, HSE, and client requirements. • Prepare and review technical documentation and project reports. • Support project planning, execution, and close-out activities. Preferred Skills: • Strong project coordination and communication skills. • Knowledge of engineering standards and project management practices. • Ability to work in a multidisciplinary team environment. • Proficiency in MS Office and project documentation. Employment Type: • Client Site Deployment (Kuwait)</p><p> • Minimum 10 years of relevant experience • Educational background in Electrical, Instrumentation, Mechanical, Civil, or Chemical Engineering Experience: • Minimum 10 years of relevant experience in engineering projects. • Experience in project execution, coordination, construction, or maintenance is preferred. Educational Qualification: • Bachelor's Degree in Electrical, Instrumentation, Mechanical, Civil, or Chemical Engineering. Preferred Industry: • Oil & Gas / Petrochemical / Refinery / EPC / Industrial Projects</p>

<p><h4>Job Description</h4> <p>The C-12/King Air Army Transport Aircraft Mechanic (FAA A&P) services, repairs, and overhauls assigned aircraft and subsystems to ensure airworthiness. Uses technical data to troubleshoot malfunctioning systems and repairs or replaces faulty components.</p> <p><strong>Requirements:</strong></p> <ul> <li>A valid FAA A&P Airframe and Powerplant Certificate is required.</li> <li>Seven (7) years’ experience as an A&P mechanic with seven (7) years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</li> <li>US citizenship is required to obtain a US government Secret Security Clearance and for facility access.</li> </ul> <p><strong>Responsibilities:</strong></p> <ul> <li>Operationally check repaired or modified systems for proper operation.</li> <li>Repair and replace aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and associated equipment.</li> <li>Read and interpret manufacturers and maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</li> <li>Examine engines for oil leaks and listen to operating engine to detect and diagnose malfunctions.</li> <li>Inspect turbine blades to detect cracks or breaks.</li> <li>Test engine operation using troubleshooting procedures and diagnostic test equipment to identify source of malfunction.</li> <li>Replace or repair worn or damaged components using hand tools, gauges, and test equipment.</li> <li>Remove and install engine from aircraft.</li> <li>Disassemble and inspect parts for wear, warping, or other defects.</li> <li>Repair or replace defective engine parts and reassemble and install engine in aircraft.</li> <li>Perform miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens, greasing moving parts, and checking brakes.</li> <li>May service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition.</li> <li>Maintain knowledge of aircraft sub-systems, including maintenance parameters, systems operation, limitations, and technical orders.</li> <li>Ability to become qualified and perform engine runs for the aircraft type assigned to support.</li> <li>Ability to read, write, and interpret technical duties is required.</li> <li>Ability to communicate effectively with all levels of employees throughout the organization.</li> <li>May specialize in work, repair, and modification of structural, precision, and functional spare parts and assemblies.</li> <li>Perform other qualified duties as assigned.</li> </ul> <h4>Minimum Requirements</h4> <ul> <li>High school diploma or GED equivalent is required.</li> <li>A valid FAA A&P Certificate is required.</li> <li>Seven (7) years’ experience as an A&P mechanic with seven (7) years of specific C-12/King Air (200/350/1900) turbo-prop aircraft mechanic hands-on maintenance experience is required.</li> <li>Completion of formal maintenance training on the assigned C-12/King Air aircraft, qualified by the appropriate US government armed forces aircraft mechanic maintenance course or civilian equivalent training is desired.</li> <li>Recent full-time experience in aviation maintenance on the C-12/King Air turbo-prop aircraft during the past 12 months is required.</li> <li>Six (6) months of flight line and overhaul and inspection experience is preferred.</li> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specifications for weight limit.</li> <li>Mechanic tools/toolbox required; mechanics must provide their own shadowed toolbox with each tool etched with PID.</li> <li>A valid US passport is required for deployment/travel; passport must have a minimum of 18 months remaining before expiration date and must be able to obtain required visas.</li> <li>Must be able to pass and clear CENTCOM (CRC) deployment training and Army MOD17 medical for deployment.</li> <li>May be required to travel to and between remote locations in austere and/or hostile environments in support of mission operations.</li> </ul> <h4>Medical and Security Clearance Requirements</h4> <ul> <li>All personnel performing engine runs, ground taxi, ordnance loading, or operating self-propelled support equipment within ten (10) feet of the aircraft silhouette must pass a physical examination from a qualified medical professional prior to conducting these operations, and subsequently on a specified periodic basis, not to exceed five (5) years.</li> <li>Must be able to obtain and maintain a US government Secret Security Clearance.</li> <li>Must be able to obtain and maintain facility credentials and authorization.</li> <li>US citizenship is required to hold a US government Secret Clearance and facility credentials and authorization to work at this facility.</li> </ul> <h4>Physical and Additional Qualifications</h4> <ul> <li>Ability to move freely about the interior and in the unpressurized area aft of the aft pressure bulkhead and meet aircraft specific specifications for weight limit.</li> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.</li> <li>May be required to carry, push, or pull up to and may exceed 50 pounds.</li> <li>May be required to lift up to 50 pounds to a height of four feet and be required to lift up to 35 pounds to a height of seven feet.</li> <li>May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools.</li> <li>Must be able to type using a standard keyboard to communicate through email and various software applications.</li> <li>Must be able to distinguish color and judge three-dimensional depths.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc.</li> <li>Must have minimum 20/100 near and far vision, correctable to 20/20.</li> <li>Must be capable of living and working in a potentially hostile environment for an extended period.</li> <li>May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">Ensure the health, safety, and environmental (HSE) compliance of maritime &amp; cargo operations. Oversee everything from heavy crane operations &amp; hazardous material handling. Inspect marine vessels, port jetties heavy lifting gear to ensure SWL limits<br> <br> <p> <b>Required Candidate profile</b> </p>Functional safety, hazard identification (HAZID)&amp; knowledge of port yard &amp; stevedoring operations. B.E (Mechanical, Marine, or Industrial) combined with specialized HSE or fire safety qualifications</div></section>

<p><h4>Job Description</h4> <p>The Aircraft Mechanic III performs the full range of military tactical aircraft maintenance and maintains, repairs, and modifies aircraft structures and structural components of complex to extreme difficulty.</p> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and apply technical expertise in restoring equipment condition and operation.</p> <p>Apply professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufacturer's manuals.</p> <p>Make entries in aircraft logs and records, and be responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.</p> <p>Plan, conduct, and supervise aircraft technical inspections.</p> <p>Compute basic weight and balance records.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Ensure compliance with aircraft configuration control, Army oil analysis program, and test measuring diagnostic equipment calibration.</p> <p>Provide lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards, and operational policies.</p> <p>Prepare evaluations, special reports, and records pertaining to aircraft maintenance, repair, and related activities.</p> <p>Perform other duties as requested.</p> <h4>Minimum Requirements</h4> <p>This role requires the candidate to obtain Disclosure and Barring Service (DBS) check through UK Government prior to deployment.</p> <p>Completion of high school or equivalent required.</p> <p>Five (5) or more years aviation maintenance experience within the past ten (10) years on that mission design series (MDS).</p> <p>Experience in maintenance, modification, and repair of tactical aircraft systems of the type being serviced and their associated components.</p> <p>Must be in possession of a passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</p> <p>Able to clear CENTCOM Medical for deployment.</p> <h4>Knowledge & Skills</h4> <p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.</p> <p>Broad knowledge of aircraft sheet metal/structural modifications and repair.</p> <p>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.</p> <p>Working knowledge of technical publications and logistics information systems.</p> <p>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</p> <p>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p> <h4>Physical Requirements / Working Environment</h4> <p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p> <p>Must be able to climb stairs, ramps, ladders, and work stands.</p> <p>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.</p> <p>May be required to lift heavy objects whose weight may exceed 50 pounds.</p> <p>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p> <p>Will handle dirty parts and lubricants.</p> <p>Will be required to wear proper personal protective equipment (PPE).</p> <p>Must be able to pass a respirator physical and fit test qualification.</p> <p>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</p> <p>Must be able to lift/push/pull minimum of 50 pounds.</p> <p>May work in maintenance shop or outside.</p> <p>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p> <p>May be exposed to extreme noise from operating equipment.</p> <p>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p></p><p></p>

<p><h4>Job description</h4> <p>The aircraft mechanic III performs the full range of military tactical aircraft maintenance and maintains, repairs, and modifies aircraft structures and structural components of complex to extreme difficulty.</p> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation.</p> <p>Apply professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufacturer's manuals.</p> <p>Make entries in aircraft logs and records, and responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts.</p> <p>Plan, conduct, and supervise aircraft technical inspections.</p> <p>Compute basic weight and balance records.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Ensure compliance with aircraft configuration control, Army oil analysis program, and test measuring diagnostic equipment calibration.</p> <p>Provide lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards, and operational policies.</p> <p>Prepare evaluations, special reports, and records pertaining to aircraft maintenance, repair, and related activities.</p> <p>Perform other duties as requested.</p> <h4>Minimum requirements</h4> <p>This role requires candidate to obtain Disclosure and Barring Service (DBS) check through UK Govt prior to deployment.</p> <p>Completion of high school or equivalent required.</p> <p>Five (5) or more years aviation maintenance experience within the past ten (10) years on that mission design series (MDS).</p> <p>Experience in maintenance, modification, and repair of tactical aircraft systems of the type being serviced and their associated components.</p> <p>Must be in possession of a passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</p> <p>Able to clear CENTCOM medical for deployment.</p> <h4>Knowledge & skills</h4> <ul> <li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.</li> <li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li> <li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.</li> <li>Working knowledge of technical publications and logistics information systems.</li> <li>Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks.</li> <li>Participate in maintenance test flights and operation checks as required.</li> <li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical requirements / working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper personal protective equipment (PPE).</li> <li>Must be able to pass a respirator physical and fit test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>As an Assistant Chief Engineer, you will be responsible for all maintenance issues within the hotel, daily, maintenance checks, and repairing mechanical equipment to deliver an excellent Guest and Member experience. An Assistant Chief Engineer will also be required to coordinate renovation projects and develop emergency programs. Specifically, you will be responsible for performing the following tasks to the highest standards:</p> <ul> <li>Responsible for maintenance issues within the hotel</li> <li>Perform daily checks around the hotel</li> <li>Conduct lift emergency release procedures as required</li> <li>Diagnose, maintain, and repair mechanical equipment within the hotel</li> <li>Ensure good relationships are built with internal and external customers</li> <li>Maintenance of all hotel fixtures and fittings to ensure they are in safe condition and take action when any unsafe situations arise</li> <li>Develop, implement, and direct all emergency programs</li> <li>Develop, implement and manage energy conservation programs for the property to minimize expenses</li> <li>Coordinate renovation bidding, define the cost and scope of the project, and oversee the general contractor and subcontractors to ensure quality work is performed cost effectively</li> <li>Perform special projects and other responsibilities as assigned</li> <li>Responsible for the health and safety of the hotel</li> <li>Ensure monthly safety inspections take place and employees are trained accordingly</li> </ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>An Assistant Chief Engineer serving Hilton brands is always working on behalf of our Guests and working with other Team Members. To successfully fill this role, you should maintain the attitude, behaviours, skills, and values that follow:</p> <ul> <li>Advanced knowledge of building management/engineering</li> <li>Positive attitude</li> <li>Good communication skills</li> <li>Committed to delivering a high level of customer service</li> <li>Excellent grooming standards</li> <li>Flexibility to respond to a range of different work situations</li> <li>Ability to work under pressure</li> <li>Ability to work on their own</li> <li>Previous experience in a management role</li> </ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Description: Quality Inspection Engineer (Facade Experience)</p><p>We are looking for a detail-oriented Quality Inspection Engineer with expertise in facade</p><p>systems and factory fabrication. The role involves inspecting fabricated facade components to</p><p>ensure compliance with project specifications and industry standards, monitoring production</p><p>processes, and ensuring top-quality delivery.</p><p><b>Key Responsibilities:</b></p><p>1. Inspect facade components during factory fabrication.</p><p>2. Verify materials, dimensions, and finishes against drawings and standards.</p><p>3. Prepare inspection and non-conformance reports.</p><p>4. Monitor processes to identify quality risks and recommend improvements.</p><p>5. Oversee material testing and approve samples/mock-ups.</p><p>6. Ensure compliance with project quality plans and standards.</p><p><b>Qualifications:</b></p><p>1. Degree in Civil/Mechanical Engineering or related field.</p><p>2. 5+ years of experience in facade systems and fabrication.</p><p>3. Knowledge of industry standards (ASTM, ISO, etc.).</p><p>4. Strong technical drawing interpretation skills.</p><p>Preferred:</p><p>Experience with curtain walls, cladding, and glazing.</p><p>Certification in Quality Management (e.g., ISO 9001).</p><p>Attributes:</p><p>Attention to detail, problem-solving skills, and team oriented</p> <div></div></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The suitable candidate should have a minimum of 12-15 years of relevant mechanical experience within the Oil &amp; Gas industry together with a minimum of 2-5 years' experience in the design and construction of onshore plants. The ideal candidate shall be familiar with industry standard codes and construction practises. Will perform liaison duties between Client and Contractor reporting to the Resident Engineer.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>12+ Years experience required</p><p>Candidate available immediately within Kuwait preferred</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a Rig Mechanic Deep Drilling with extensive land rig maintenance experience for our client in Kuwait. Position Overview: The Rig Mechanic Deep Drilling will be responsible for maintaining, troubleshooting, and repairing mechanical systems and equipment on deep drilling land rigs to ensure maximum operational reliability and uptime. Key Responsibilities: Mechanical Maintenance: Perform preventive and corrective maintenance on drilling rig mechanical equipment. Inspect, troubleshoot, and repair mud pumps, drawworks, top drives, rotary systems, and auxiliary equipment. Diagnose mechanical failures and implement effective corrective actions. Ensure equipment operates in accordance with OEM recommendations. Equipment Reliability: Support preventive and predictive maintenance programs. Participate in root cause failure analysis activities. Ensure accurate maintenance documentation and reporting. Assist in minimizing equipment downtime and improving reliability. Compliance &amp; Safety: Comply with company HSE policies and procedures. Participate in safety meetings, inspections, and emergency drills. Ensure safe work practices are followed during maintenance activities.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Technical Diploma in Mechanical Engineering or related discipline.</li><li>Minimum 5+ years of mechanical maintenance experience on drilling rigs.</li><li>Extensive experience supporting deep drilling land rigs.</li><li>Strong knowledge of drilling rig mechanical systems and equipment.</li><li>Ability to troubleshoot and repair complex mechanical equipment.</li><li>Good communication skills in English.</li></ul><p></p></section>