Security Supervisor Jobs in Kuwait

<p><h4>Job description</h4> <p>The UH-60 aircraft mechanic AM-I (UH-60) troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneumatic and hydraulic systems, engines, auxiliary power unit, and ventilation and heating systems.<br> Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.<br> Service and lubricate aircraft and subsystems.<br> Safely prepare aircraft for inspections and maintenance checks and services.<br> Perform scheduled inspections and assist in performing special inspections.<br> Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.<br> Use and perform operator maintenance on tools, special tools and aircraft ground support equipment.<br> Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft technical manuals, maintenance information and action messages and all technical guidance provided through government official representatives.<br> Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.<br> Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and/or operation.<br> Participate in maintenance test flights and operation checks as required.<br> Perform other duties as requested.</p> <h4>Minimum requirements</h4> <ul> <li>High school diploma or equivalent required.</li> <li>A valid up-to-date FAA A&P certificate is preferred.</li> <li>If no FAA A&P certificate, candidate must have three (3) years aviation maintenance experience, with a minimum of two (2) years on the assigned UH-60 mission design series (MDS).</li> <li>All experience must be within the six (6) most recent years.</li> <li>Must be in possession of a U.S. passport with a minimum of two plus years validity and be able to travel internationally.</li> <li>Must be able to obtain and maintain facility public trust NAC-I. Note: US citizenship is required for facility public trust NAC-I at this work location.</li> <li>Must be able to pass the CENTCOM medical requirement to deploy.</li> <li>Must be able to obtain Kuwait visa.</li> </ul> <h4>Knowledge and skills</h4> <ul> <li>General knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</li> <li>Basic knowledge of aircraft sheet metal and structural modifications and repair.</li> <li>General knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and shears.</li> <li>Working knowledge of technical publications and logistics information systems.</li> <li>Able to prioritize workloads to maintain schedules on assigned projects.</li> <li>Participate in maintenance test flights and operation checks as required.</li> <li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical requirements and working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper personal protective equipment (PPE).</li> <li>Must be able to pass a respirator physical and fit test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>Occasionally lifts objects up to 50 pounds.</li> <li>Most heavy lifting is accomplished through the use of mechanical devices.</li> <li>May be expected to work in austere environments and all-weather conditions.</li> </ul></p><p></p>

<p> <b>The UH-60 Aircraft Mechanic AM-I (UH-60)</b> troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.</p> <ul> <li> <p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</p> </li> <li> <p>Service and lubricate aircraft and subsystems.</p> </li> <li> <p>Safely prepare aircraft for inspections and maintenance checks and services.</p> </li> <li> <p>Perform scheduled inspections and assist in performing special inspections.</p> </li> <li> <p>Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.</p> </li> <li> <p>Use and perform operator maintenance on tools, special tools and aircraft ground support equipment.</p> </li> <li> <p>Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives.</p> </li> <li> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> </li> <li> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation.</p> </li> <li> <p>Participate in maintenance test flights and operation checks as required.</p> </li> <li> <p>Perform other duties as requested.</p> </li> </ul> <p> </p> <p> <b>Minimum Requirements:</b> </p> <ul> <li> <p>High School Diploma or equivalent required.</p> </li> <li> <p>A valid up-to-date FAA A&amp;P certificate is preferred.</p> </li> <li> <p>If No FAA A&amp;P certificate; candidate Must have Three (3) years aviation maintenance experience, with a minimum of two (2) years on the assigned <b>UH-60 </b>Mission Design Series (MDS). </p> </li> <li> <p>All experience must be within the Six (6) most recent years. </p> </li> <li> <p>Must be in possession of a U.S. Passport with a min. 2 plus years validity and be able to travel internationally.</p> </li> <li> <p>Must be able to obtain and maintain facility Public Trust NAC-I. Note: <b>US Citizenship is required </b>for facility Public Trust NAC-I at this work location.</p> </li> <li> <p>Must be able to pass the CENTCOM Medical requirement to deploy.</p> </li> <li> <p>Must be able to obtain Kuwait Visa</p> </li> </ul> <p> </p> <p> <b>Knowledge &amp; Skills</b> </p> <ul> <li> <p>General knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</p> </li> <li> <p>Basic knowledge of aircraft sheet metal/structural modifications and repair.</p> </li> <li> <p>General knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</p> </li> <li> <p>Working knowledge of technical publications and Logistics Information Systems.</p> </li> <li> <p>Able to prioritize workloads to maintain schedules on assigned projects.</p> </li> <li> <p>Participate in maintenance test flights and operation checks as required.</p> </li> <li> <p>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</p> </li> <li> <p>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, and may be required to make entries in aircraft logs and records.</p> </li> </ul> <p> </p> <p> <b>Physical Requirements/Working Environment</b> </p> <ul> <li> <p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p> </li> <li> <p>Must be able to climb stairs, ramps, ladders, and work stands.</p> </li> <li> <p>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</p> </li> <li> <p>May be required to lift heavy objects whose weight may exceed 50 pounds.</p> </li> <li> <p>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p> </li> <li> <p>Will handle dirty parts and lubricants.</p> </li> <li> <p>Will be required to wear proper Personal Protective Equipment (PPE).</p> </li> <li> <p>Must be able to pass a Respirator Physical and Fit Test qualification.</p> </li> <li> <p>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</p> </li> <li> <p>Must be able to lift/push/pull minimum of 50 pounds.</p> </li> <li> <p>May work in maintenance shop or outside.</p> </li> <li> <p>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p> </li> <li> <p>May be exposed to extreme noise from operating equipment.</p> </li> <li> <p>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p> </li> <li> <p>Occasionally lifts objects up to 50 pounds.</p> </li> <li> <p>Most heavy lifting is accomplished through the use of mechanical devices.</p> </li> <li> <p>May be expected to work in austere environments and all-weather conditions.</p> </li> </ul>

<p>The Aircraft Mechanic III performs the full range of military tactical aircraft maintenance and maintains repairs and modifies aircraft structures and structural components of complex to extreme difficulty. Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components. Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. Apply professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Make entries in aircraft logs and records, and responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts. Plan, conduct, and supervise aircraft technical inspections. Compute basic weight and balance records. Participate in maintenance test flights and operation checks as required. Ensure compliance with aircraft configuration control, Army oil analysis Program and test measuring diagnostic equipment calibration. Provide lower level technicians guidance in aircraft repair and technical inspection techniques and procedures according to directives, technical manuals, work standards and operational policies. Prepare evaluations, special reports, and records pertaining to aircraft maintenance repair and related activities. Perform other duties as requested.</p><p>This role requires candidate to obtain Disclosure and Barring Service (DBS) check through UK Govt prior to deployment. Completion of high school or equivalent required. Five (5) or more year s aviation maintenance experience within the past ten (10) years on that mission design series (MDS). Experience in maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components. Must be in possession of a Passport with 3 years of validity remaining at the time of hire and be able to travel internationally. Able to clear CENTCOM Medical for deployment.</p><p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. Working knowledge of technical publications and Logistics Information Systems. Able to prioritize workloads to maintain schedules on assigned projects and is required to lead teams through more complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p><p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift heavy objects whose weight may exceed 50 pounds. Must be able to type using a standard keyboard to communicate through e-mail and various software applications. Will handle dirty parts and lubricants. Will be required to wear proper Personal Protective Equipment (PPE). Must be able to pass a Respirator Physical and Fit Test qualification. May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc. Must be able to lift/push/pull minimum of 50 pounds. May work in maintenance shop or outside. Must be able to work in a shop where the environment is drafty, noisy, and dirty. May be exposed to extreme noise from operating equipment. May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Completion of high school or equivalent required.</li><li>Five (5) or more year s aviation maintenance experience within the past ten (10) years on that mission design series (MDS).</li><li>Experience in maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components.</li><li>Must be in possession of a Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</li><li>Able to clear CENTCOM Medical for deployment.</li><li>This role requires candidate to obtain Disclosure and Barring Service (DBS) check through UK Govt prior to deployment.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Kuwait in support of WEXMAC*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Under the supervision of the Site Manager, the Site Lead provides management and oversight to various site locations for WEXMAC Northern Camps. SL provides direction and guidance to managers within the site, supervises site personnel, to include subcontractors on site, and manages the daily operation ensuring operational and contractual success in a safe and efficient manner as outlined in the WEXMAC Performance Work Statement (PWS). Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Responsible and manages all daily requirements at a specific Site or multiple Site locations. + Serves as the main Point of Contact (POC) to the Government at the Site for all Site operational and maintenance requirements. + Responsible for all Site employees and Sub-Contractors working for the Site WEXMAC contract. + Responsible for all Scope of Work (SoW) development for solicitations to Subcontractors. + Responsible for all Technical Evaluations of site-specific Subcontractor proposals. + Responsible for the establishment of all Site doctrine to include but not limited to: Site Safety Plan, Quality Plan, Work Construction, applicable SoPs. + Reports to the Deputy Task Order Manager and completes all required reports and documentation. + Responsible for accountability, safety, and security of all Site equipment and personnel. + Performs other duties as required by Task Order Management. Qualifications Education/Experience Requirements Education/Certifications: + + Bachelor’s degree in business, Management or related discipline is preferred. One-year related experience may be substituted for one year of education, if degree is required + Six Sigma Green Belt Certification preferred. + Must have an ACTIVE Secret Clearance and should be able to maintain the required clearance. + Must be a U.S. Citizen Experience: + + Ten (10) years’ experience as a manager in a multi-discipline environment comparable to that offered under this contract. + Preferred background in military installation base support/infrastructure management. + Minimum of 5 years’ experience in Operations, Site Management or Program Management directly supporting DoD or DoS. Skills: + + Knowledge of business and management principles involved in strategic planning, resource allocation, leadership technique, production methods, and coordination of people and resources. + Knowledge of principles and processes for providing customer services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction. + Knowledgeable of how to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. + Must be able to read, write and speak the English language with proficiency. + Requires a collaborative work style, fostering cooperation, and teamwork. + Must exercise discretion and good sound judgment. + Must have high level of proficiency in the use of MS Office and/or other related applications Physical Requirements: + + Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. If the use of arm and/or leg controls requires exertion of forces greater than that for sedentary work and the worker sits most of the time, the job is rated for light work. Working Conditions: + + The worker is subject to extreme heat. Temperatures typically above 110+ degrees for extended periods of time. Consideration should be given to the effect of other environmental conditions, such as wind and humidity. + The worker is subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level. + The worker is subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. + The worker is subject to driving long periods of time between sites. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Kuwait in support of WEXMAC*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Under the supervision of the VP Kuwait Country Manager (Sr. TO Mgr), the Site Manager provides management and oversight to various site locations for a Task Order of the WEXMAC program. The SM provides direction and guidance to managers within the site, supervises site personnel, to include subcontractors on site, and manages the daily operation ensuring operational and contractual success in a safe and efficient manner as outlined in the WEXMAC Performance Work Statement (PWS). Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Responsible and manages all daily requirements at a specific Site or multiple Site locations. + Serves as the main Point of Contact (POC) to the Government at the Site for all Site operational and maintenance requirements. + Responsible for all Site employees and Sub-Contractors working for the Site WEXMAC contract. + Responsible for all Scope of Work (SoW) development for solicitations to Subcontractors. + Responsible for all Technical Evaluations of site-specific Subcontractor proposals. + Responsible for the establishment of all Site doctrine to include but not limited to: Site Safety Plan, Quality Plan, Work Construction, applicable SoPs. + Completes all required reports and documentation. + Responsible for accountability, safety, and security of all Site equipment and personnel. + Performs other duties as required by Task Order Management. Qualifications Education/Experience Requirements: Education/Certifications: + + Bachelor’s Degree in Business, Management or related discipline preferred. + Six Sigma Green Belt Certification preferred. + Must have an ACTIVE Secret Clearance and should be able to maintain the required clearance. + Must be a U.S. Citizen Experience: + + Ten (10) years’ experience as a manager in a multi-discipline environment comparable to that offered under this contract. + Preferred background in military installation base support/infrastructure management. + Minimum of 5 years’ experience in Operations, Site Management or Program Management directly supporting DoD or DoS. Skills: + + Knowledge of business and management principles involved in strategic planning, resource allocation, leadership technique, production methods, and coordination of people and resources. + Knowledge of principles and processes for providing customer services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction. + Knowledgeable of how to use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. + Must be able to read, write and speak the English language with proficiency. + Requires a collaborative work style, fostering cooperation, and teamwork. + Must exercise discretion and good sound judgment. + Must have high level of proficiency in the use of MS Office and/or other related applications. Physical Requirements: + + Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. If the use of arm and/or leg controls requires exertion of forces greater than that for sedentary work and the worker sits most of the time, the job is rated for light work. Working Conditions: + + The worker is subject to extreme heat. Temperatures typically above 110+ degrees for extended periods of time. Consideration should be given to the effect of other environmental conditions, such as wind and humidity. + The worker is subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level. + The worker is subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. + The worker is subject to driving long periods of time between sites. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism.</p><p>Responsibilities The KC-130J Aircraft Mechanic III will troubleshoot and/or repair malfunctions in the aircraft airframes and power plant systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge. Perform assigned maintenance to specified KC-130J standards, to include performing operational testing procedures and required functional tests in support of the KC-130J maintenance manual series. Performance abilities include maintenance and serviceability procedures for subsystem components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation. In the course of assigned duties will apply a thorough knowledge of airframes and power plants engineering principles, techniques, and methods in the maintainability of existing equipment and systems. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation. Possess the ability to read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.</p><p>Description: Apply and provide a thorough working knowledge of airframes and power plant systems to include aircraft modification procedures and experience with specific airframe, hydraulic, engine, and propeller systems, systems integration, system/component failure analysis, inspection, repair, and testing of airframes and power plant systems through engineering principles, techniques, and methods in the maintainability of existing KC-130J equipment and systems. Performance abilities include performance of maintenance and servicing related aircraft components, to include landing gear, flight control, hydraulics, engine, and propeller, component removal, inspection, and reinstallation and incorporates applicable technical directives and bulletins. Troubleshoots and/or repairs malfunctions in the aircraft airframes and power plants systems and all other supporting aircraft systems that require general aviation mechanical skills and knowledge, performing assigned maintenance in compliance with established directives and specified KC-130J MRC/MIMs, to include performing calibration procedures and required functional tests. Possess competent abilities in the use and application of hand tools, power tools, and associated precision measuring equipment used in support of system testing, evaluation, and operation, to include complying with established local tool control programs. Read, interpret, and apply manufacturers' maintenance manuals, service bulletins, technical data, engineering data, diagrams, schematics, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged component Use illustrated parts breakdowns (IPB)s to determine material requirements, research associated part numbers, and order parts to complete maintenance actions. Performs periodic special, hourly, conditional, and phase maintenance/isochronal inspections as required by Maintenance Instruction Manuals (MIM)s, Maintenance Requirement Cards (MRC)s, manufacturer s specifications, and all applicable directives, orders, and instructions as directed through Maintenance Control. Interpret MIMs and all associated maintenance publications, orders, and directives to perform maintenance and use processes to document such maintenance actions, ensuring the accurate entry of data into the locally used computer database system. Performs applicable O and I level maintenance functions in support of In-Flight Refueling Systems and rebuild shop and Aircraft Tire &amp; Wheel rebuilding. Perform scheduled and unscheduled maintenance actions, to include cross-training in all required essential technical specialties, to facilitate the removal, inspection, repair/replacement, installation, and test procedures of aircraft component parts, survival equipment, pneumatic systems, environmental control systems, fuel systems, avionics systems, and all associated airframes and power plants equipment systems. Inspect, control, and prevent corrosion of aircraft metals and system components using established and approved procedures. Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures/ Checkout and operate all necessary support equipment for flight line maintenance of established maintenance procedures When necessary, perform other duties and supervisory functions, critical to the function of the program and to assure compliance with the Performance Work Statement (PWS).</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Graduation from a standard four (4) year high school or equivalent (GED)</li><li>This position requires the ability to obtain and maintain a Department of Defense (DoD) Secret Level security clearance.</li><li>Must have a working knowledge of and be proficient with (input and extract data) of computers, aircraft data debriefing and diagnostic software (DTADS), and maintenance information systems.</li></ul>

Greet and welcome guests with warmth, professionalism, and genuine hospitality. Ensure VIP and special guests receive a seamless, personalized experience from arrival to departure. Coordinate pre-arrival arrangements including room preferences, special requests, and amenities in collaboration with relevant departments. Maintain updated guest profiles and preferences in the property management system for future reference and loyalty building. Assist with check-ins and check-outs, ensuring all processes are handled efficiently and courteously. Handle guest inquiries, concerns, and requests promptly, diplomatically, and effectively. Liaise with departments such as Housekeeping, Concierge, Room Service, and Security to ensure guest satisfaction. Conduct guest room inspections for VIP arrivals to ensure readiness and attention to detail. Anticipate guest needs and proactively provide thoughtful touches that enhance the guest experience. Support the Front Office team in administrative tasks, reporting, and daily operations as needed. Uphold and represent the hotel's service standards and brand values at all times.<br><br>Don't quite meet every single requirement, but still believe you'd be a great fit for the job? We'll never know unless you hit the 'Apply' button. Start your journey with us today.

<p><h4>Description</h4> <p>Check the shelf life of products, tag the production/expiry date on each product and communicate the wasted product figures.<br> Follow security, fire, and safety procedures according to the set rules and regulations and report any incidents to hierarchy.<br> Receive food orders and prepare requested items and their display as per outlined recipes, HACCP standards, portion control practices, and items’ presentation guidelines.<br> Take part in the opening and closing duties of the bakery in compliance with the norms and internal procedures and contribute in stocking and receiving goods when needed.<br> Ensure sanitation of work station at all times during the shift by cleaning the fridge, shelves and counter, sharpening knives and cleaning utensils upon end of shift.<br> Check at the start of the shift that products needed for the service station are on hand according to set par level and place the order of the products from the internal store.<br> Maintain good product and food items knowledge to be able to answer any inquiries and to provide observations when needed.</p> <h4>Qualifications</h4> <ul> <li>High school degree is a plus</li> <li>0-1 year of experience in F&B operations</li> <li>Fluency in English</li> <li>Teamwork: level 2</li> <li>Change and adaptability: level 1</li> <li>Commercial understanding: level 1</li> <li>Driving and achieving results: level 1</li> <li>Attention to details: level 2</li> <li>Communication skills: level 2</li> <li>Customer focus: level 1</li> <li>Organization: Paul Café</li> </ul> <h4>Additional Information</h4> <p>Primary location: Kuwait-Al Assima Mall<br> Schedule: Full-time</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Construction Manager provides on-site administrative, technical management, and leadership for the design and contract compliance, and construction of large multi-million-dollar Government funded construction project at a specified project site. Principal Accountabilities (Typical duties include the following, although specific duties vary by assignment or contract.) • Supervises the total construction effort to ensure the project is constructed in accordance with the design, budget and schedule. • Ensures construction adheres to construction specifications. • Reads, interprets, and deciphers all construction documents (schedules, specifications, blueprints, schematics, diagrams, etc. Provides technical assistance and interpretation of drawings, recommending construction methods and equipment as required. • Logs, references, distributes, and files all related correspondence, drawings, and documents. • Plans, coordinates, and supervises on-site functions (scheduling, material control, and day-to-day direction of on-site administrative staff, when assigned). • Ensures all project staff and subcontractors employed to execute engineering-construction tasks conform to applicable work rules and SOPs for security, safety, environmental controls, hazardous materials and underground utilities. • Visits construction sites and submits required construction reports to monitor progress against schedule/timelines. • Cooperates with visiting Government and DI personnel conducting official inspection visits and surveys and participate in their briefing or orientation. • Provides leadership, mentoring, and professional development to assigned staff. • Manages the work of teams to procure and construct work. • Leads, manages and mentors the assigned technical and professional staff responsible for the facilities construction from contract development through construction completion. • Attends meetings as required including design and construction reviews and construction kickoff meetings. • Performs other qualified duties as assigned. Knowledge &amp; Skills • Knowledge of cost controls, contractual and project management of international construction projects. • Shall also be versed in the International Building Code, NFPA Fire Codes and the NEC in addition to general construction practices. • Knowledge of construction materials, processes, techniques, and methods. • Thorough knowledge of the Federal Acquisition Regulation (FAR), Defense Federal Acquisition Regulations (DFAR) and related federal and state legislation and regulations. • Knowledge of Service Contract Act and Truth in Negotiations Act. • Knowledge of international business management and International Traffic in Arms Regulations (ITAR) if required for contract. • Knowledge and understanding of the Foreign Corrupt Practices Act (FCPA). • Knowledge of accounting practices including DynCorp s disclosed accounting practices. • Effective leadership and interpersonal skills. • Requires a thorough knowledge of practices, standards, and regulations as they apply to the design and construction of the regional camps forward operating bases, and major civil projects. • Excellent communication and organizational skills are essential. • Able to use Project and Construction Management planning and reporting tools such as Microsoft Project and Primavera. Experience &amp; Education • HS diploma or equivalent • Bachelor s degree in engineering, construction technology, or construction management (preferred). • Must be able to obtain and maintain a Secret Clearance; note US Citizenship is required to obtain a Secret Clearance. • Minimum seven (7) years of construction field experience in all phases of Civil and Building Construction or a two (2) year associate degree in construction management or related field and five (5) years of field experience. • Experience with mechanical projects (HVAC, plumbing) and electrical projects. • Experience in civil/structural projects and hold an American Concrete Institute (ACI) concrete testing certification. • Construction inspector shall also be versed in the International Building Code (IBC), NFPA Fire Codes, British Standard (BS) Electrical Code, and the National Electric Code (NEC) in addition to general construction practices. • Must be able to read, interpret, and decipher all construction documents (schedules, specifications, blueprints, schematics, diagrams, and related documents); analyze procedures to identify deficiencies, review time/cost estimates, monitor project phasing and ensure adherence to approved safety standards, observe and inspect ongoing construction work, oversee construction record keeping activities, recommend payments to contractors, recommend change orders, review proposed change orders submitted by construction contractors, prepare and submit reports, and keep a daily log of all activities, weather conditions and work quantities. • An EIT or Professional Certification/Project Management Certification is desired. • Additional knowledge/skills may be required by contract or assignment. Physical Requirements/Working Environment • Works in a normal office environment with controlled temperature and lighting conditions. • May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>HS diploma or equivalent</li><li>Bachelor s degree in engineering, construction technology, or construction management (preferred).</li><li>Must be able to obtain and maintain a Secret Clearance; note US Citizenship is required to obtain a Secret Clearance.</li><li>Minimum seven (7) years of construction field experience in all phases of Civil and Building Construction or a two (2) year associate degree in construction management or related field and five (5) years of field experience.</li><li>Experience with mechanical projects (HVAC, plumbing) and electrical projects.</li><li>Experience in civil/structural projects and hold an American Concrete Institute (ACI) concrete testing certification.</li><li>Construction inspector shall also be versed in the International Building Code (IBC), NFPA Fire Codes, British Standard (BS) Electrical Code, and the National Electric Code (NEC) in addition to general construction practices.</li><li>Must be able to read, interpret, and decipher all construction documents (schedules, specifications, blueprints, schematics, diagrams, and related documents); analyze procedures to identify deficiencies, review time/cost estimates, monitor project phasing and ensure adherence to approved safety standards, observe and inspect ongoing construction work, oversee construction record keeping activities, recommend payments to contractors, recommend change orders, review proposed change orders submitted by construction contractors, prepare and submit reports, and keep a daily log of all activities, weather conditions and work quantities.</li><li>An EIT or Professional Certification/Project Management Certification is desired.</li><li>Additional knowledge/skills may be required by contract or assignment.</li></ul><p></p></section>

<p>Location: Kuwait</p><p>Store Manager / Assistant Store Manager</p><p>Industry: Fashion &amp; Retail</p><p>Key Responsibilities</p><p>Receive incoming merchandise and verify quantities, styles, sizes, colors, and product codes against delivery documents.</p><p>Check products for damages, defects, or discrepancies and report any issues to the Store Manager.</p><p>Organize and maintain the stockroom according to company standards.</p><p>Ensure all merchandise is properly tagged, labeled, folded, hung, and stored.</p><p>Replenish merchandise from the stockroom to the sales floor as required.</p><p>Monitor stock levels and communicate low-stock or fast-moving items to the management team.</p><p>Conduct daily, weekly, and monthly stock counts as required.</p><p>Assist with physical inventory counts and stock audits.</p><p>Maintain accurate records of stock transfers, deliveries, returns, and damaged items.</p><p>Process stock transfers between stores or warehouses according to company procedures.</p><p>Prepare merchandise for customer reservations, online orders, transfers, or deliveries when required.</p><p>Follow FIFO/FEFO principles where applicable, particularly for relevant retail products.</p><p>Ensure the stockroom is clean, safe, organized, and free from unnecessary items.</p><p>Support visual merchandising by ensuring sufficient stock is available for displays and promotional activities.</p><p>Coordinate with the sales team to respond quickly to requests for specific products or sizes.</p><p>Follow company policies and procedures relating to inventory control, security, loss prevention, and health and safety.</p><p>Report stock discrepancies, shortages, overages, or suspected losses immediately.</p><p><strong>Desired Candidate Profile</strong></p><p>Requirement open to all nationals residing in Kuwait</p><p>Previous experience in stock keeping, inventory, warehouse, or fashion retail is preferred.</p><p>Good understanding of inventory and stock control procedures.</p><p>Strong attention to detail and accuracy.</p>

<p><h4>Position objective</h4> <p>The position is responsible to represent the brand by maximizing and contributing to the sales within the store through exceptional customer service and retail experience.</p> <p>Perform various operational duties such as store maintenance and visual presentation standards as assigned by the store manager or assistant store manager.</p> <h4>Key responsibilities</h4> <ul> <li>Must possess knowledge of varied cosmetics products and accessories.</li> <li>Demonstrate excellent make-up selling skills.</li> <li>Recommend and link customer specific products.</li> <li>Identify customer requirements and deliver excellent customer services.</li> <li>Brand representation at the required standards with updated product knowledge and minimized stock loss.</li> <li>Ensure all stock is laid out and displayed in order to attract customers and as per standard layout norms.</li> <li>Ensure awareness and vigilance at all times of security in the store without any negligence.</li> <li>Ensure the highest standards of housekeeping standards.</li> <li>Handle the POS (Point of Sale) / Billing counter.</li> <li>Greet the customers and assist them in selecting the right product.</li> <li>Must be presentable and well-groomed at all times.</li> <li>Tally money in the cash during the beginning and end of the shifts.</li> <li>Process the payments by cash, credit cards, vouchers, or automatic debits.</li> <li>Issue receipts, refunds, and change to the customers correctly.</li> <li>Convert the window shoppers to ultimate buyers.</li> <li>Promote the Club Apparel Loyalty Program of the company for repeat sales.</li> <li>Flexible to work for extended hours during the sale or festival period.</li> <li>Record the inventory inward and outward and maintain the report of the same.</li> <li>Must be updated about the various brands of the group for suggestive selling to the customers.</li> </ul></p><p></p>

<p><h4>Position Objective</h4> <p>The position is responsible to represent the brand by maximizing and contributing to the sales within the store through exceptional customer service and retail experience.</p> <p>Perform various operational duties such as store maintenance and visual presentation standards as assigned by the store manager or assistant store manager.</p> <h4>Key Responsibilities</h4> <ul> <li>Must possess knowledge of varied cosmetics products and accessories.</li> <li>Demonstrate excellent make-up selling skills.</li> <li>Recommend and link customer specific products.</li> <li>Identify customer requirements and deliver excellent customer services.</li> <li>Brand representation at the required standards with updated product knowledge and minimized stock loss.</li> <li>Ensure all stock is laid out and displayed in order to attract customers and as per standard layout norms.</li> <li>Ensure awareness and vigilance at all times of security in the store without any negligence.</li> <li>Ensure the highest standards of housekeeping standards.</li> <li>Handle the POS (Point of Sale) / Billing Counter.</li> <li>Greet the customers and assist them in selecting the right product.</li> <li>Must be presentable and well-groomed at all times.</li> <li>Tally money in the cash during the beginning and end of the shifts.</li> <li>Process the payments by cash, credit cards, vouchers, or automatic debits.</li> <li>Issue receipts, refunds, and change to the customers correctly.</li> <li>Convert the window shoppers to ultimate buyers.</li> <li>Promote the Club Apparel Loyalty Program of the company for repeat sales.</li> <li>Flexible to work for extended hours during the sale or festival period.</li> <li>Record the inventory inward and outward and maintain the report of the same.</li> <li>Must be updated about the various brands of the group for suggestive selling to the customers.</li> </ul></p><p></p>

<div> <p> <strong>POSITION SUMMARY</strong> </p> <p> </p> <p>Check figures, postings, and documents for correct entry, mathematical accuracy, and proper codes. Organize, secure, and maintain all files, records, cash and cash equivalents in accordance with policies and procedures. Record, store, access, and/or analyze computerized financial information. Maintain accurate electronic spreadsheets for financial and accounting data. Classify, code, and summarize numerical and financial data to compile and keep financial records, using journals, ledgers, and/or computers. Prepare, maintain, and distribute statistical, financial, accounting, auditing, or payroll reports and tables. Complete period-end closing procedures and reports as specified. Prepare, review, reconcile, and issue bills, invoices, and account statements according to company procedures.</p> <p> </p> <p>Follow all company policies and procedures; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets; protect the privacy and security of guests and coworkers. Address guests' service needs in a professional, positive, and timely manner. Speak with others using clear and professional language; prepare and review written documents accurately and completely; answer telephones and emails using appropriate etiquette. Move, lift, carry, push, pull, and place objects weighing less than or equal to 10 pounds without assistance. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Perform other reasonable job duties as requested by Supervisors.</p> <p> </p> <p>PREFERRED QUALIFICATIONS</p> <p>Education: High school diploma or G.E.D. equivalent.</p> <p>Related Work Experience: At least 1 year of related work experience.</p> <p>Supervisory Experience: No supervisory experience.</p> <p>License or Certification: None</p> <p> </p> <p> </p> </div> <div> </div> <p><br></p>

<div> <p> <strong>POSITION SUMMARY</strong> </p> <p> </p> <p>Check figures, postings, and documents for correct entry, mathematical accuracy, and proper codes. Organize, secure, and maintain all files, records, cash and cash equivalents in accordance with policies and procedures. Record, store, access, and/or analyze computerized financial information. Maintain accurate electronic spreadsheets for financial and accounting data. Classify, code, and summarize numerical and financial data to compile and keep financial records, using journals, ledgers, and/or computers. Prepare, maintain, and distribute statistical, financial, accounting, auditing, or payroll reports and tables. Complete period-end closing procedures and reports as specified. Prepare, review, reconcile, and issue bills, invoices, and account statements according to company procedures.</p> <p> </p> <p>Follow all company policies and procedures; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets; protect the privacy and security of guests and coworkers. Address guests' service needs in a professional, positive, and timely manner. Speak with others using clear and professional language; prepare and review written documents accurately and completely; answer telephones and emails using appropriate etiquette. Move, lift, carry, push, pull, and place objects weighing less than or equal to 10 pounds without assistance. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Perform other reasonable job duties as requested by Supervisors.</p> <p> </p> <p>PREFERRED QUALIFICATIONS</p> <p>Education: High school diploma or G.E.D. equivalent.</p> <p>Related Work Experience: At least 1 year of related work experience.</p> <p>Supervisory Experience: No supervisory experience.</p> <p>License or Certification: None</p> <p> </p> <p> </p> </div> <div> </div> <p><br></p>

<p>Technical lead for Web Squad (React.js). Owns web portal delivery, component library, and frontend architecture.</p><br><ol><li><p>Lead React.js development practices across the Web Squad.</p></li><li><p>Provide guidance on:</p></li></ol><p>-React component design</p><p>-Hooks and reusable logic</p><p>-State management approaches</p><p>-Frontend testing strategies</p><p>-Performance optimization</p><p>-Modern JavaScript/TypeScript practices</p><p>-Conduct technical reviews and ensure adherence to coding standards.</p><p>-Resolve complex technical challenges and guide developers toward effective solutions.</p><br><ol start="3"><li><p>Own the end-to-end technical delivery of web portals and front-end applications.</p></li><li><p>Provide technical leadership throughout the application lifecycle, including design, development, testing, deployment, and support.</p></li><li><p>Translate business requirements and UX designs into scalable frontend solutions.</p></li><li><p>Ensure web portals meet performance, usability, accessibility, and security standards.</p></li><li><p>Manage technical dependencies with backend services, APIs, and external integrations.</p></li><li><p>Define and maintain frontend architecture standards and best practices.</p></li><li><p>Design scalable React.js application structures using modern frontend patterns.</p></li><li><p>Establish guidelines for:</p><p>-React component design</p><p>- Application structure</p><p>- State management</p><p>- Routing</p><p>- API integration</p><p>- Error handling</p><p>- Performance optimization</p><p>- Code organization</p></li></ol><br><ol start="11"><li><p>Review and approve frontend technical designs and implementation approaches</p></li><li><p>Drive architectural improvements and reduction of frontend technical debt.</p></li></ol><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in computer science, Software Engineering, Information Technology, Computer Engineering, or related technical discipline.</p></li><li><p>React.js or JavaScript/TypeScript professional certifications</p></li><li><p>Web accessibility certification (e.g., WCAG-related training)</p></li><li><p>Experienced Packaged App Development professional leading technical and functional project application delivery. Brings 10+ years in Microsoft web development using C#, API services, and SQL technologies, with strengths in project management, sprint planning, application design, testing, debugging, and client support.</p></li><li><p>Kuwait based / Transferable Visa</p></li></ul>

<ul><li><p>Technical lead for Mobile Squad. Owns iOS/Android/Harmony OS delivery, code quality, and architecture decisions for the mobile platform. </p></li><li><p>Lead the Mobile Applications Squad, providing technical leadership and guidance across all mobile development initiatives.</p></li><li><p>Own the end-to-end delivery of mobile applications on iOS, Android, and HarmonyOS platforms.</p></li><li><p>Define and enforce mobile architecture, coding standards, and best practices to ensure high-quality, scalable, and maintainable solutions.</p></li><li><p>Conduct code reviews and oversee technical deliverables to ensure compliance with architectural and quality standards.</p></li><li><p>Drive technical decision-making, resolve complex development challenges, and support production issue resolution.</p></li><li><p>Collaborate with product owners, UX/UI designers, QA engineers, and backend teams to deliver high-quality mobile solutions.</p></li><li><p>Monitor application performance, security, and reliability, and recommend continuous improvements to enhance the mobile platform.</p></li><li><p>Mentor and coach mobile developers, fostering technical excellence and knowledge sharing within the team </p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Bachelor’s degree in computer science, Software Engineering, Information Technology, Computer Engineering, or a related field.</p></li><li><p>Google Associate Android Developer or Android Developer Certification</p></li><li><p>Apple App Development with Swift Certification</p></li><li><p>Huawei Certified ICT Professional (HCIP) – HarmonyOS (preferred)</p></li><li><p>Microsoft Certified: Azure Developer Associate or AWS Certified Developer – Associate</p></li><li><p>Scrum Master (PSM or CSM) or Agile-related certification</p></li><li><p>Technical Lead with 10+ years of experience specializing in mobile application architecture and cross platform development using React Native & Flutter, delivering enterprise-grade solutions for large-scale, regulated, and high-traffic organizations.</p></li><li><p>Proven track record in defining mobile strategies, building scalable and secure applications, and leading end-to-end delivery across iOS and Android platforms.</p></li><li><p>Kuwait based - Transferable Visa </p></li></ul>

<p>Have an enforcement presence that discourages illegitimate behavior on/off the field. This may mean issuing warnings to the riders breaking guidelines. Evaluate local traffic and road safety concerns, observe problem areas, behaviors and provide inputs. Check and make sure riders are using all talabat branded gears (uniform, bag, box, mask, gloves etc). At the same time flag non-talabat riders using talabat rider gears to maintain brand consistency on the road. Find out riders not maintaining hygiene standards of their uniform, food bag/box and keeping their bikes timely serviced. On the spot verification of rider and bike documents (Driving License, Emirates ID, Mulkiya etc) as per local laws. Monitor and control the rider s behavior towards restaurant/customer and vice versa. Visit high restaurant density areas during demand peak times to ensure riders are maintaining safe distance. Assist riders community (irrespective of the company) in emergency situations (accidents, breakdowns etc) Perform the vital public services of protecting life and property. Assist people in need (community support) Maintain your presence on the ground as Talabat s face.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum 1 year of experience as a delivery rider. and 2-3 years of experience as a fleet/security coordinator. Presentable with good physical fitness. Disciplined, organised person with strong ethics. Ability to maintain a professional standards even during stressful situations. Good communication skills, both written and verbal. English and Hindi/Urdu is a must, Arabic is a plus. Proficient in recording, reporting and analysing data. Persuasive skills in order to be able to coach non-compliant riders effectively. Valid Driving License.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>POSITION SUMMARY Process all reservation requests, changes, and cancellations received by phone, fax, or mail. Identify guest reservation needs and determine appropriate room type. Verify availability of room type and rate. Explain guarantee, special rate, and cancellation policies to callers. Accommodate and document special requests. Answer questions about property facilities/services and room accommodations. Follow sales techniques to maximize revenue. Input and access data in reservation system. Indicate special room reservation types (e.g., complimentary rooms, employee discounts, travel agent inspection rates, and wholesale reservations) by inputting the correct code and rate into the reservation system. Follow proper escalation procedures when addressing guest concerns. Follow all company policies and procedures; ensure uniform and personal appearance are clean and professional; maintain confidentiality of proprietary information; protect company assets; protect the privacy and security of guests and coworkers. Welcome and acknowledge all guests according to company standards; anticipate and address guests service needs; assist individuals with disabilities; thank guests with genuine appreciation. Speak with others using clear and professional language; answer telephones using appropriate etiquette. Develop and maintain positive working relationships with others; support team to reach common goals; listen and respond appropriately to the concerns of other employees. Comply with quality assurance expectations and standards. Move, lift, carry, push, pull, and place objects weighing less than or equal to 10 pounds without assistance. Perform other reasonable job duties as requested by Supervisors.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Education: High school diploma or G.E.D. equivalent.</li><li>Related Work Experience: No related work experience.</li><li>Supervisory Experience: No supervisory experience.</li><li>License or Certification: None</li></ul><p></p></section>

<p><h4>Company description</h4> <p>Mövenpick Hotel & Resort Al Bida’a Kuwait is situated on a stunning beach with white sand merging into azure waters. Located just 15 minutes from Kuwait International Airport and ten minutes from Kuwait’s well-known shopping district in Salmiya, our 5 star hotel has a location that suits both business and leisure travellers alike. Shopping destinations, restaurants and a cinema complex are also located nearby for those who would like to discover the city.</p> <h4>Job description</h4> <p>Front office senior receptionist</p> <p>First impressions are everything! As a Front Office Supervisor, you will ensure guests have a memorable experience from arrival through departure by delivering exceptional service and maintaining operational excellence.</p> <h4>What you will be doing:</h4> <ul> <li>Greet guests, manage check-ins, respond to requests, and settle accounts while providing friendly and engaging service.</li> <li>Supervise day-to-day front office operations, ensuring service standards are consistently met and maintained.</li> <li>Address guest concerns promptly, track issues, and notify appropriate departments to resolve problems efficiently.</li> <li>Assist the Front Office Manager with staffing records, scheduling, and staff training initiatives.</li> </ul> <h4>Qualifications</h4> <p>Your experience and skills include:</p> <ul> <li>Service-focused personality with a genuine commitment to hospitality; proven customer service experience is required.</li> <li>Proficiency with Opera property management system or related hotel management software.</li> <li>Fluency in English and Arabic; additional languages are a plus.</li> <li>Demonstrated supervisory or team leadership experience in a hospitality or customer-facing environment.</li> <li>Strong problem-solving and conflict resolution skills with the ability to handle guest concerns professionally and efficiently.</li> <li>Excellent organizational and multitasking abilities to manage multiple front office operations simultaneously.</li> <li>Outstanding verbal and written communication skills in English and Arabic for effective guest and staff interaction.</li> <li>Knowledge of hospitality industry standards, guest service protocols, and front office best practices.</li> </ul> <h4>Additional information</h4> <h4>What is in it for you:</h4> <ul> <li>Learning programs through our academies.</li> <li>Opportunity to develop your talent and grow within your property and across the world.</li> <li>Ability to make a difference through our corporate social responsibility activities, like Planet 21.</li> <li>Career opportunities across a network of international brands in more than 5100 hotels across 110 countries.</li> </ul> <h4>Our commitment to diversity & inclusion:</h4> <p>We are an inclusive company and our ambition is to attract, recruit and promote diverse talent.</p> <h4>Why work for Accor?</h4> <p>We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities.</p> <p>By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality. Do what you love, care for the world, dare to challenge the status quo! #BELIMITLESS</p></p><p></p>

<p>Greet guests warmly upon arrival and departure, ensuring an inviting first impression. Assist guests with luggage handling to and from rooms, vehicles, and storage areas. Escort guests to rooms, explaining hotel facilities, features, and amenities. Offer knowledgeable information about hotel services and local attractions. Assist with transportation arrangements, including taxis, shuttles, and private cars. Handle guest packages and deliveries securely and efficiently. Maintain cleanliness and organization of the lobby, entrance, and bell desk areas. Respond promptly to guest requests and anticipate needs to provide seamless service. Work closely with the Front Desk, Concierge, and other departments to ensure smooth guest experiences. Adhere to safety and security procedures in handling guest belongings. Uphold Four Seasons service and grooming standards at all times. Perform any other tasks or projects assigned by management.</p><p><strong>Desired Candidate Profile</strong></p><p>Previous experience in a luxury hotel or customer service role preferred. Excellent communication skills in English. Arabic speaker is a plus. Strong interpersonal skills with a natural service orientation. Physically able to lift and carry luggage and stand for extended periods. Ability to work flexible shifts including evenings, weekends, and holidays. Team player who thrives in a collaborative environment.</p>